File size: 2,711 Bytes
5154c4e 3de3b50 5154c4e | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 | {
"id": "single-software-execution--cli--solidcam--task-18--windows",
"snapshot": "SolidCAM-2025",
"instruction": "Use command-line automation with the installed SOLIDWORKS CAM 2025 environment (powered by CAMWorks); do not use GUI clicks, generic G-code generators, or manual .nc editing/copying. For this task, SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\basic_milling_part.step and read C:\\Users\\User\\Desktop\\tools.csv. Use one top-side 3-axis milling setup and G54 at the model top-face center [0, 0, 6] mm. In the posted work coordinates, the top face is Z=0 and positive Z points away from the material. Machine the 48 x 24 mm central pocket to Z=-3 with T1 (D8 flat end mill, S7800, F480), drill exactly the two visible holes centered at X=-12/Y=0 and X=12/Y=0 through the 12 mm stock with T2 (D5 drill, S5000, F180), and finish the complete 72 x 48 mm outside Profile/Contour to Z=-12 with T3 last (D6 profile end mill, S8500, F600). Use a conventional three-axis milling post with explicit units, G54, tool length compensation, safe rapid clearance, and program termination. Do not use Mill-Turn, turning, live tooling, C-axis, Y-axis turning, indexed 4/5-axis, or simultaneous 5-axis machining. Save the posted NC output exactly as C:\\Users\\User\\Desktop\\task-18.nc.",
"source": "https://www.solidworks.com/product/solidworks-cam",
"config": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-18/init_file/basic_milling_part.step",
"path": "C:\\Users\\User\\Desktop\\basic_milling_part.step"
},
{
"local_path": "task-18/init_file/tools.csv",
"path": "C:\\Users\\User\\Desktop\\tools.csv"
}
]
}
}
],
"trajectory": "trajectories/",
"related_apps": [
"solidcam"
],
"artifact_paths": [
"C:\\Users\\User\\Desktop\\task-18.nc"
],
"evaluator": {
"postconfig": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-18/eval.py",
"path": "C:\\Users\\User\\Desktop\\eval.py"
}
]
}
}
],
"func": "exact_match",
"result": {
"type": "vm_command_line",
"command": "python C:\\Users\\User\\Desktop\\eval.py",
"shell": "true"
},
"expected": {
"type": "rule",
"rules": {
"expected": "True\n"
}
}
},
"proxy": false,
"fixed_ip": false,
"possibility_of_env_change": "low"
}
|