qid int64 1 74.7M | question stringlengths 12 33.8k | date stringlengths 10 10 | metadata list | response_j stringlengths 0 115k | response_k stringlengths 2 98.3k |
|---|---|---|---|---|---|
1,522,041 | I successfully added a custom folder under this pc creating a new user shell folder generating a new clsid.
I’m hardly trying to achieve what happens with the default user shell folders like music, pictures and the others.
That is, if I type win key + r and write down the path C:\Users\username\Pictures explorer open... | 2020/02/01 | [
"https://superuser.com/questions/1522041",
"https://superuser.com",
"https://superuser.com/users/707009/"
] | This is a problem of a monitor -- it is common when using Display Port to sometimes not turn on from sleep on powering on (me once in 10-20 boots), at least before the GOP driver takes control. With HDMI (with HDMI CEC at least) it is a less common issue as it is tested as part of standard compliance. To get into bios ... | I fixed this issue by disabling CMS in BIOS.
Board: Gigabyte A520i.
CPU: 5600G
GPU: 5600G. I use graphic output of the APU. |
1,522,041 | I successfully added a custom folder under this pc creating a new user shell folder generating a new clsid.
I’m hardly trying to achieve what happens with the default user shell folders like music, pictures and the others.
That is, if I type win key + r and write down the path C:\Users\username\Pictures explorer open... | 2020/02/01 | [
"https://superuser.com/questions/1522041",
"https://superuser.com",
"https://superuser.com/users/707009/"
] | I could not enter BIOS. Win 10, ALIENWARE R9 w/ RTX2080 super, ACER XV273K monitor. My monitor OSD "source" was set to "DP1." I have 2 DP cables installed (DP1 & DP2). This computer also had problems waking from sleep. The solution: Set "source" to "auto." Both problems went away.
The down side of this: booting takes ... | I reinstalled my vbios drivers with only my dp port plugged in and it solved the problem. Worked after I rebooted it twice.
Asus Apex VII Motherboard , with a dell rtx 3080 in it. |
1,522,041 | I successfully added a custom folder under this pc creating a new user shell folder generating a new clsid.
I’m hardly trying to achieve what happens with the default user shell folders like music, pictures and the others.
That is, if I type win key + r and write down the path C:\Users\username\Pictures explorer open... | 2020/02/01 | [
"https://superuser.com/questions/1522041",
"https://superuser.com",
"https://superuser.com/users/707009/"
] | I could not enter BIOS. Win 10, ALIENWARE R9 w/ RTX2080 super, ACER XV273K monitor. My monitor OSD "source" was set to "DP1." I have 2 DP cables installed (DP1 & DP2). This computer also had problems waking from sleep. The solution: Set "source" to "auto." Both problems went away.
The down side of this: booting takes ... | I fixed this issue by disabling CMS in BIOS.
Board: Gigabyte A520i.
CPU: 5600G
GPU: 5600G. I use graphic output of the APU. |
1,522,041 | I successfully added a custom folder under this pc creating a new user shell folder generating a new clsid.
I’m hardly trying to achieve what happens with the default user shell folders like music, pictures and the others.
That is, if I type win key + r and write down the path C:\Users\username\Pictures explorer open... | 2020/02/01 | [
"https://superuser.com/questions/1522041",
"https://superuser.com",
"https://superuser.com/users/707009/"
] | You still have the issue ?
Just purchased a new monitor and was faced with the exact same issue (Gigabyte G32qc)
My new monitor as a option DP 1.3 (120hrtz only) or DP 1.4 (165hrtz+)
DP 1.3 was fine getting into bios
DP 1.4 get the issue no display whilst booting until it gets to windows
This pointed me to my VGA car... | I reinstalled my vbios drivers with only my dp port plugged in and it solved the problem. Worked after I rebooted it twice.
Asus Apex VII Motherboard , with a dell rtx 3080 in it. |
1,522,041 | I successfully added a custom folder under this pc creating a new user shell folder generating a new clsid.
I’m hardly trying to achieve what happens with the default user shell folders like music, pictures and the others.
That is, if I type win key + r and write down the path C:\Users\username\Pictures explorer open... | 2020/02/01 | [
"https://superuser.com/questions/1522041",
"https://superuser.com",
"https://superuser.com/users/707009/"
] | You still have the issue ?
Just purchased a new monitor and was faced with the exact same issue (Gigabyte G32qc)
My new monitor as a option DP 1.3 (120hrtz only) or DP 1.4 (165hrtz+)
DP 1.3 was fine getting into bios
DP 1.4 get the issue no display whilst booting until it gets to windows
This pointed me to my VGA car... | I fixed this issue by disabling CMS in BIOS.
Board: Gigabyte A520i.
CPU: 5600G
GPU: 5600G. I use graphic output of the APU. |
26,281 | What freeware guitar amp sim VSTs can you recommend? Please link to just one effect per answer so we can vote for favourites.
Useful information for each plugin includes:
* link to download
* features
* screenshot
* platforms supported (e.g. Windows / Mac, VST, RTAS, AudioUnit)
* CPU usage (can you live monitor
* any... | 2011/04/21 | [
"https://sound.stackexchange.com/questions/26281",
"https://sound.stackexchange.com",
"https://sound.stackexchange.com/users/7471/"
] | [*Native Instruments Guitar Rig 4 Player*](http://www.native-instruments.com/#/en/products/producer/guitar-rig-4-player/) is a free version of their commercial Guitar Rig 4 effects package. It contains just one amp sim "Jump" (looks like it is based on a Marshall) and one cabinet, plus a fairly generous selection of ad... | [*Studio Devil British Valve Custom*](http://www.studiodevil.com/products/british_valve_custom/) is an emulation of a Marshall amp with 4x12 cabinet emulation. It has a no frills user interface, with just the basic tone and gain controls making it very straightforward to use. You have to create an account on their webs... |
26,281 | What freeware guitar amp sim VSTs can you recommend? Please link to just one effect per answer so we can vote for favourites.
Useful information for each plugin includes:
* link to download
* features
* screenshot
* platforms supported (e.g. Windows / Mac, VST, RTAS, AudioUnit)
* CPU usage (can you live monitor
* any... | 2011/04/21 | [
"https://sound.stackexchange.com/questions/26281",
"https://sound.stackexchange.com",
"https://sound.stackexchange.com/users/7471/"
] | [*Native Instruments Guitar Rig 4 Player*](http://www.native-instruments.com/#/en/products/producer/guitar-rig-4-player/) is a free version of their commercial Guitar Rig 4 effects package. It contains just one amp sim "Jump" (looks like it is based on a Marshall) and one cabinet, plus a fairly generous selection of ad... | *[Fretted Synth FreeAmp 3](http://rekkerd.org/fretted-synth/)* is the latest evolution of one what was probably the first comprehensive guitar amp and effects VST to be made available as freeware. It contains a remarkable array of features and although it has not been updated for some time, remains a useful tool. The s... |
26,281 | What freeware guitar amp sim VSTs can you recommend? Please link to just one effect per answer so we can vote for favourites.
Useful information for each plugin includes:
* link to download
* features
* screenshot
* platforms supported (e.g. Windows / Mac, VST, RTAS, AudioUnit)
* CPU usage (can you live monitor
* any... | 2011/04/21 | [
"https://sound.stackexchange.com/questions/26281",
"https://sound.stackexchange.com",
"https://sound.stackexchange.com/users/7471/"
] | [*Native Instruments Guitar Rig 4 Player*](http://www.native-instruments.com/#/en/products/producer/guitar-rig-4-player/) is a free version of their commercial Guitar Rig 4 effects package. It contains just one amp sim "Jump" (looks like it is based on a Marshall) and one cabinet, plus a fairly generous selection of ad... | [*Voxengo Boogex*](http://www.voxengo.com/product/boogex/) is interesting mainly because of its extreme flexibility. It consists of three parts. The first - a "pre-filter" allows for dramatic shaping of the EQ of the incoming signal. The next stage is the amplifier itself, which I think is the weakest part of this effe... |
44,395 | Looked up the dictionary. It says flow back. Does it mean "come back" here?
>
> It is an agony that people here are beginning to get used to as time drags on and optimism and hope ebb away. ([source](https://www.bbc.com/news/world-asia-30629009))
>
>
> | 2014/12/31 | [
"https://ell.stackexchange.com/questions/44395",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/13989/"
] | >
> It says flow back. Does it mean "come back" here?
>
>
>
Flow back, as like "go back", not "come back". Another synonym for these words is "recede".Let's look at the meaning the upper paragraph tries to demonstrate.
>
> While some of the relatives will keep the fire of hope burning, there is the developing,... | No, "ebb" is used to mean that something is fading away. Here, it means that people started out being optimistic and hopeful (that some of the passengers might be alive), but they're losing hope as time goes by. |
23,076 | I know there were more than a hundred-thousand prophets. But was wondering if Hazrat Eesa (alaihas salaam) was among the last prophets mentioned in the Quran? | 2015/02/25 | [
"https://islam.stackexchange.com/questions/23076",
"https://islam.stackexchange.com",
"https://islam.stackexchange.com/users/11979/"
] | Talking without references, it is said that there are 124,000 prophets all together from the beginning.
And Allah says,
>
> **And for every nation is a messenger**. So when their messenger comes, it will be judged between them in justice, and they will not be wronged (Qur'an 10:47)
>
>
>
Since, we've heard only ... | This cant be answered. The Bible calls the Prophet Muhammad the "Holy Spirit", IMO, and off the top of my memory states that the Prophet Jesus is not a king on this earth but has prepared the way him whom I take to be the Prophet Muhammad since he was a leader of a growing kingdom.
So the two Prophets followed each ot... |
23,076 | I know there were more than a hundred-thousand prophets. But was wondering if Hazrat Eesa (alaihas salaam) was among the last prophets mentioned in the Quran? | 2015/02/25 | [
"https://islam.stackexchange.com/questions/23076",
"https://islam.stackexchange.com",
"https://islam.stackexchange.com/users/11979/"
] | Talking without references, it is said that there are 124,000 prophets all together from the beginning.
And Allah says,
>
> **And for every nation is a messenger**. So when their messenger comes, it will be judged between them in justice, and they will not be wronged (Qur'an 10:47)
>
>
>
Since, we've heard only ... | Was Jesus / Jesus (pbuh) the last prophet before Muhammad (pbuh)?
Jesus (pbuh) is a Christian prophet and one of the first prophets and the owner of the law. He was the last prophet before the Prophet of Islam, peace be upon him, and one of the heralds of his advent.
Ref:<https://wiki.ahlolbait.com/%D8%AD%D8%B6%D8%B1%... |
23,076 | I know there were more than a hundred-thousand prophets. But was wondering if Hazrat Eesa (alaihas salaam) was among the last prophets mentioned in the Quran? | 2015/02/25 | [
"https://islam.stackexchange.com/questions/23076",
"https://islam.stackexchange.com",
"https://islam.stackexchange.com/users/11979/"
] | By pure coincidence, just today I was reading the طبقات by Ibn Saʻd. In his chapter on the death of the Prophet he cites a tradition to the effect that every prophet lives half as long as his predecessor. Then he says that Muḥammad lived to be 62 and that his predecessor ʻĪsā b. Maryam lived to be 124. This does imply ... | This cant be answered. The Bible calls the Prophet Muhammad the "Holy Spirit", IMO, and off the top of my memory states that the Prophet Jesus is not a king on this earth but has prepared the way him whom I take to be the Prophet Muhammad since he was a leader of a growing kingdom.
So the two Prophets followed each ot... |
23,076 | I know there were more than a hundred-thousand prophets. But was wondering if Hazrat Eesa (alaihas salaam) was among the last prophets mentioned in the Quran? | 2015/02/25 | [
"https://islam.stackexchange.com/questions/23076",
"https://islam.stackexchange.com",
"https://islam.stackexchange.com/users/11979/"
] | By pure coincidence, just today I was reading the طبقات by Ibn Saʻd. In his chapter on the death of the Prophet he cites a tradition to the effect that every prophet lives half as long as his predecessor. Then he says that Muḥammad lived to be 62 and that his predecessor ʻĪsā b. Maryam lived to be 124. This does imply ... | Was Jesus / Jesus (pbuh) the last prophet before Muhammad (pbuh)?
Jesus (pbuh) is a Christian prophet and one of the first prophets and the owner of the law. He was the last prophet before the Prophet of Islam, peace be upon him, and one of the heralds of his advent.
Ref:<https://wiki.ahlolbait.com/%D8%AD%D8%B6%D8%B1%... |
245,215 | What is the meaning of the capacitance parameter in the datasheet of a varistor?
For example: I have noticed that 7mm 430 varistor voltage(07D431K) and 14mm 430 varistor voltage (14D431K) have the same max continuous voltage and the same maximum clamping voltage, but the larger varistor (14D431K) has higher maximum su... | 2016/07/09 | [
"https://electronics.stackexchange.com/questions/245215",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/66895/"
] | I would expect the capacitance to rise with increase surge current, rated power and size of the varistor. It's just a function of a larger area junction, which has a higher capacitance.
If you are merely protecting 220v mains, then the capacitance figure is purely incidental to your use. Like the physical size of the ... | Metallic oxide varistors (MOV's) behave much like a capacitor except the dielectric insulator between the 2 tin plates has a fixed 'soft' clamp voltage, above which the MOV begins to conduct current in either direction. As the voltage rises so does the current flow.
At twice the MOV's rated voltage they can absorb ... |
25,835 | I was looking at the Northrop Grumman website and came across the [EA-18G Growler](https://en.wikipedia.org/wiki/Boeing_EA-18G_Growler), which looks very similar to the F/A-18. What are the visual differences between the two? | 2016/03/04 | [
"https://aviation.stackexchange.com/questions/25835",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/13715/"
] | You asked about visual differences. The main visual difference is that there are no guns on the EA-18G, just AIM-120 AMRAAM or AGM-88 HARM missiles. Other than that the visual differences are minimal. The airframe is still a F/A-18F Super Hornet, where -F stands for twin-seat. Engines are also the same General Electric... | Physically, an EA-18G is a EW derivative of the F/A-18F Super Hornet multirole fighter. This was a cost effective means for the Navy to develop a replacement for the EA-6B Prowler aircraft for the fleet SEAD/DEAD role. The most obvious physical differences between the Growler and the Rhino are the replacement of the mi... |
15,359 | My employer has declined to allow me to appear in court today. I missed two jury summonses and have been issued an order to appear to explain. I am due to show today, however, my employer has a lot to get done today (big client deadlines, etc.), and has declined me request to leave. Is this legal? He mentioned a 48-hou... | 2016/11/18 | [
"https://law.stackexchange.com/questions/15359",
"https://law.stackexchange.com",
"https://law.stackexchange.com/users/9908/"
] | If you don't go to court the court can issue an arrest warrant. Telling the court that your employer forbade you may or may not let you avoid punishment for contempt.
You are obliged as an employee to follow the lawful and reasonable requests of your employer. Telling you not to follow a summons is neither legal (tech... | [California Labor Code 230](http://www.leginfo.ca.gov/cgi-bin/displaycode?section=lab&group=00001-01000&file=200-244) states that you may not be penalized for being called to jury duty, nor may you be penalized if you or a family member are the victim of a felony or are called as a witness in a judicial proceeding, nor... |
9,233,039 | i'm converting a MATLAB program in c++ using [Armadillo](http://arma.sourceforge.net/docs.html#syntax) for matrix algebra.
i'm stuck on [cell](http://blogs.mathworks.com/loren/2006/06/21/cell-arrays-and-their-contents/) type. someone has some hints? | 2012/02/10 | [
"https://Stackoverflow.com/questions/9233039",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/433685/"
] | That's because 'cell' is not really a type - it is a placeholder for anything you want to place in it. The closest thing I can think of in languages such as C# and Python is a 'tuple', which intrinsically can contain anonymous types.
Since C++ does not have a built-in tuple type, I suggest you take a look at [Boost](... | Your cell data will likely translate fairly well into a C++ object. I would recommend you examine what your cells contain and see if you could represent it as a class. Then you would be able to create vectors/arrays/matrices of your objects and have them treated similar to cells in MATLAB. |
9,233,039 | i'm converting a MATLAB program in c++ using [Armadillo](http://arma.sourceforge.net/docs.html#syntax) for matrix algebra.
i'm stuck on [cell](http://blogs.mathworks.com/loren/2006/06/21/cell-arrays-and-their-contents/) type. someone has some hints? | 2012/02/10 | [
"https://Stackoverflow.com/questions/9233039",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/433685/"
] | Armadillo has [field](http://arma.sourceforge.net/docs.html#field) class! | That's because 'cell' is not really a type - it is a placeholder for anything you want to place in it. The closest thing I can think of in languages such as C# and Python is a 'tuple', which intrinsically can contain anonymous types.
Since C++ does not have a built-in tuple type, I suggest you take a look at [Boost](... |
9,233,039 | i'm converting a MATLAB program in c++ using [Armadillo](http://arma.sourceforge.net/docs.html#syntax) for matrix algebra.
i'm stuck on [cell](http://blogs.mathworks.com/loren/2006/06/21/cell-arrays-and-their-contents/) type. someone has some hints? | 2012/02/10 | [
"https://Stackoverflow.com/questions/9233039",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/433685/"
] | Armadillo has [field](http://arma.sourceforge.net/docs.html#field) class! | Your cell data will likely translate fairly well into a C++ object. I would recommend you examine what your cells contain and see if you could represent it as a class. Then you would be able to create vectors/arrays/matrices of your objects and have them treated similar to cells in MATLAB. |
220,287 | I have the following setup:
modem + router - - - - -Ubuntu box on master mode.........wireless devises. Ubuntu machine connects to Internet on wired network. I've dhcp3-server, masquerading, and wireless card with master mode on Ubuntu box. The issue is Ubuntu connects to the router on NAT. The wireless devises connec... | 2011/01/09 | [
"https://serverfault.com/questions/220287",
"https://serverfault.com",
"https://serverfault.com/users/59291/"
] | Have a look at this article, it explains how to bridge a wireless and LAN networks:
<https://help.ubuntu.com/community/BridgingNetworkInterfaces>
Don't worry about DHCP relay - that will happen automatically across the bridge. Should you really want to DHCP relay there is a package dhcp3-relay for that but I don't t... | I did it. <https://askubuntu.com/questions/21679/script-to-setup-ubuntu-as-a-wireless-accesspoint-on-a-bridge-mode> |
119,148 | By default, I am fairly certain iTunes does not support this .... but is there a way to burn multiple playlists to one CD? Client does not want to dump playlists into one giant one then burn..he wishes to have the playlists in their original hierarchy one one CD .. | 2010/03/12 | [
"https://superuser.com/questions/119148",
"https://superuser.com",
"https://superuser.com/users/27723/"
] | iTunes (9 in this case) doesn't support this, but I have a workaround:
1. Create a Burn Folder ( File -> New Burn Folder ) on your desktop.
2. Create folders within the Burn Folder that reflect the names of your playlists
3. Drag items from iTunes playlist to the corresponding folder in the Burn Folder...
4. Then sele... | In iTunes create a blank playlist. Open each playlist you wish to burn one at a time, select the entire song list and move it to the blank playlist. You can do this as many times as you wish to the 750 MB capacity limit of a blank CD. Go to *Burn to Disc*.
If you convert your files to MP3 beforehand, you can store ma... |
2,787 | This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging cycle and I feel kinda bad tossing all that nice metal into the trash can. | 2011/03/31 | [
"https://music.stackexchange.com/questions/2787",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/13/"
] | [The Second Strings Project](http://www.darrylpurpose.com/second-strings-project/)
----------------------------------------------------------------------------------
I think this is **exactly** what you are looking for.
From the site:
>
> ...a campaign to collect and distribute used guitar strings to needy musicia... | you can try taking them to any metals recycling place. |
2,787 | This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging cycle and I feel kinda bad tossing all that nice metal into the trash can. | 2011/03/31 | [
"https://music.stackexchange.com/questions/2787",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/13/"
] | you can try taking them to any metals recycling place. | Our French association, Music Solidarity, recycles all guitar and bass strings! We transform it in action for solidarity and sustainable development. Our website: [www.musicsolidarity.com](http://www.musicsolidarity.com) |
2,787 | This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging cycle and I feel kinda bad tossing all that nice metal into the trash can. | 2011/03/31 | [
"https://music.stackexchange.com/questions/2787",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/13/"
] | [The Second Strings Project](http://www.darrylpurpose.com/second-strings-project/)
----------------------------------------------------------------------------------
I think this is **exactly** what you are looking for.
From the site:
>
> ...a campaign to collect and distribute used guitar strings to needy musicia... | turn them into guitar string sculptures and sell them :) |
2,787 | This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging cycle and I feel kinda bad tossing all that nice metal into the trash can. | 2011/03/31 | [
"https://music.stackexchange.com/questions/2787",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/13/"
] | turn them into guitar string sculptures and sell them :) | Our French association, Music Solidarity, recycles all guitar and bass strings! We transform it in action for solidarity and sustainable development. Our website: [www.musicsolidarity.com](http://www.musicsolidarity.com) |
2,787 | This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging cycle and I feel kinda bad tossing all that nice metal into the trash can. | 2011/03/31 | [
"https://music.stackexchange.com/questions/2787",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/13/"
] | [The Second Strings Project](http://www.darrylpurpose.com/second-strings-project/)
----------------------------------------------------------------------------------
I think this is **exactly** what you are looking for.
From the site:
>
> ...a campaign to collect and distribute used guitar strings to needy musicia... | There really isn't any way you can "recycle" a single steel string, it's pretty much useless.
But when you have a lot of them, tie them together and trow it in a metal recycling dumpster- at least that way the process of melting and sifting out the heavier metals will be easier for the recycling company. |
2,787 | This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging cycle and I feel kinda bad tossing all that nice metal into the trash can. | 2011/03/31 | [
"https://music.stackexchange.com/questions/2787",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/13/"
] | There really isn't any way you can "recycle" a single steel string, it's pretty much useless.
But when you have a lot of them, tie them together and trow it in a metal recycling dumpster- at least that way the process of melting and sifting out the heavier metals will be easier for the recycling company. | Our French association, Music Solidarity, recycles all guitar and bass strings! We transform it in action for solidarity and sustainable development. Our website: [www.musicsolidarity.com](http://www.musicsolidarity.com) |
2,787 | This one goes out to all my eco-friendly shredder pals. Does anyone know of an organization that takes guitar strings and recycles them? I run through quite a few packs per month on a heavy gigging cycle and I feel kinda bad tossing all that nice metal into the trash can. | 2011/03/31 | [
"https://music.stackexchange.com/questions/2787",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/13/"
] | [The Second Strings Project](http://www.darrylpurpose.com/second-strings-project/)
----------------------------------------------------------------------------------
I think this is **exactly** what you are looking for.
From the site:
>
> ...a campaign to collect and distribute used guitar strings to needy musicia... | Our French association, Music Solidarity, recycles all guitar and bass strings! We transform it in action for solidarity and sustainable development. Our website: [www.musicsolidarity.com](http://www.musicsolidarity.com) |
75,546 | I've enchanted a ring, necklace, and apron to each give me a 20% bonus to smithing which is already at 100. On top of that, I have some blacksmith elixirs that give a 50% smithing bonus. Using all these items at the smithing wheel, I've been able to improve my ebony greatword and war hammer to legendary status *without... | 2012/07/03 | [
"https://gaming.stackexchange.com/questions/75546",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/10570/"
] | There currently isn't a weapon damage cap, so you'll be able to create stronger ebony weapons with the ebony perk than without. This goes for all weapons and their respective smithing perks.
That answers your question, but I think maybe the question you should be asking is, "How easy do I want to make this game".
I'm... | Armor caps out at 567 total points, so if you can reach that with your current setup you will not experience a boost to protection. Arms however can always increase in power with smithing.
That said, base damage matters little at high smithing levels, so if you have steel smithing you can create a steel sword that wil... |
75,546 | I've enchanted a ring, necklace, and apron to each give me a 20% bonus to smithing which is already at 100. On top of that, I have some blacksmith elixirs that give a 50% smithing bonus. Using all these items at the smithing wheel, I've been able to improve my ebony greatword and war hammer to legendary status *without... | 2012/07/03 | [
"https://gaming.stackexchange.com/questions/75546",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/10570/"
] | There currently isn't a weapon damage cap, so you'll be able to create stronger ebony weapons with the ebony perk than without. This goes for all weapons and their respective smithing perks.
That answers your question, but I think maybe the question you should be asking is, "How easy do I want to make this game".
I'm... | I have 4 items equipped that increase smithing by 40% and a pick axe that increases smithing. Also can make potions that increase smithing by 130% I can make armor with higher than 567def and I made a Dragon Bone Maul that does a little over 1000 dmg after buffs from 40% two handed enchantments varried through-out my f... |
381,206 | In Office 2003 if I recall correctly you had a "record macro" option.
In PowerPoint 2007, under View->Macros, you get a macro box. None of the options are "record". If you put in a name, you can select "create", but that takes you to the VB editor. If you edit the slide manually, it does not generate the VBA code.
Yo... | 2008/12/19 | [
"https://Stackoverflow.com/questions/381206",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1179/"
] | It seems you are out of luck [What happened to the macro recorder?](http://office.microsoft.com/en-us/powerpoint/HA101181981033.aspx?pid=CH101030561033)
I have since read:
>
> Contrary to what Microsoft says, use
> the legacy keyboard commands Alt+T, M,
> R to start the macro recorder in
> Powerpoint 2007, and us... | The Keystroke activated record doesen't work it creates an empty macro with very few(usually none!) of the actual actions that you performed. |
381,206 | In Office 2003 if I recall correctly you had a "record macro" option.
In PowerPoint 2007, under View->Macros, you get a macro box. None of the options are "record". If you put in a name, you can select "create", but that takes you to the VB editor. If you edit the slide manually, it does not generate the VBA code.
Yo... | 2008/12/19 | [
"https://Stackoverflow.com/questions/381206",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1179/"
] | It seems you are out of luck [What happened to the macro recorder?](http://office.microsoft.com/en-us/powerpoint/HA101181981033.aspx?pid=CH101030561033)
I have since read:
>
> Contrary to what Microsoft says, use
> the legacy keyboard commands Alt+T, M,
> R to start the macro recorder in
> Powerpoint 2007, and us... | Both answers are correct the macro recorder can be activated but it is pretty much useless since it records little to nothing. It seems that the ppt programmers at MS really take issue with customers being able to customize powerpoint. Executing repetitive tasks or just formatting an object the way you want it (and not... |
381,206 | In Office 2003 if I recall correctly you had a "record macro" option.
In PowerPoint 2007, under View->Macros, you get a macro box. None of the options are "record". If you put in a name, you can select "create", but that takes you to the VB editor. If you edit the slide manually, it does not generate the VBA code.
Yo... | 2008/12/19 | [
"https://Stackoverflow.com/questions/381206",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1179/"
] | It seems you are out of luck [What happened to the macro recorder?](http://office.microsoft.com/en-us/powerpoint/HA101181981033.aspx?pid=CH101030561033)
I have since read:
>
> Contrary to what Microsoft says, use
> the legacy keyboard commands Alt+T, M,
> R to start the macro recorder in
> Powerpoint 2007, and us... | The macro recorder works using this shortcut, but you should note that it won't record for features that were added after Powerpoint 2003 (and this includes anything to do with the new charting engine that was introduced in PPT 2007).
This isn't about arrogance, it's simply that 2007 was a BIG rewrite for all of the O... |
381,206 | In Office 2003 if I recall correctly you had a "record macro" option.
In PowerPoint 2007, under View->Macros, you get a macro box. None of the options are "record". If you put in a name, you can select "create", but that takes you to the VB editor. If you edit the slide manually, it does not generate the VBA code.
Yo... | 2008/12/19 | [
"https://Stackoverflow.com/questions/381206",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1179/"
] | Both answers are correct the macro recorder can be activated but it is pretty much useless since it records little to nothing. It seems that the ppt programmers at MS really take issue with customers being able to customize powerpoint. Executing repetitive tasks or just formatting an object the way you want it (and not... | The Keystroke activated record doesen't work it creates an empty macro with very few(usually none!) of the actual actions that you performed. |
381,206 | In Office 2003 if I recall correctly you had a "record macro" option.
In PowerPoint 2007, under View->Macros, you get a macro box. None of the options are "record". If you put in a name, you can select "create", but that takes you to the VB editor. If you edit the slide manually, it does not generate the VBA code.
Yo... | 2008/12/19 | [
"https://Stackoverflow.com/questions/381206",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1179/"
] | The macro recorder works using this shortcut, but you should note that it won't record for features that were added after Powerpoint 2003 (and this includes anything to do with the new charting engine that was introduced in PPT 2007).
This isn't about arrogance, it's simply that 2007 was a BIG rewrite for all of the O... | The Keystroke activated record doesen't work it creates an empty macro with very few(usually none!) of the actual actions that you performed. |
381,206 | In Office 2003 if I recall correctly you had a "record macro" option.
In PowerPoint 2007, under View->Macros, you get a macro box. None of the options are "record". If you put in a name, you can select "create", but that takes you to the VB editor. If you edit the slide manually, it does not generate the VBA code.
Yo... | 2008/12/19 | [
"https://Stackoverflow.com/questions/381206",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1179/"
] | The macro recorder works using this shortcut, but you should note that it won't record for features that were added after Powerpoint 2003 (and this includes anything to do with the new charting engine that was introduced in PPT 2007).
This isn't about arrogance, it's simply that 2007 was a BIG rewrite for all of the O... | Both answers are correct the macro recorder can be activated but it is pretty much useless since it records little to nothing. It seems that the ppt programmers at MS really take issue with customers being able to customize powerpoint. Executing repetitive tasks or just formatting an object the way you want it (and not... |
166,722 | Can I use desire in its singular form without an article before it? That is, if I write "...so also a person without desire", will that be correct? or I'll have to use "..so also a person without any desire" or "..without desires"? | 2014/04/28 | [
"https://english.stackexchange.com/questions/166722",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/64136/"
] | It is certainly not correct. Either you *did* mishear it or the person that spoke or wrote the line mixed up these two possible correct versions:
>
> And I would've gladly given it to you.
>
> And I would gladly have given it to you.
>
>
> | 'I would've gladly have given it to you...'
It is really not correct. you would have misheard. |
166,722 | Can I use desire in its singular form without an article before it? That is, if I write "...so also a person without desire", will that be correct? or I'll have to use "..so also a person without any desire" or "..without desires"? | 2014/04/28 | [
"https://english.stackexchange.com/questions/166722",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/64136/"
] | It is certainly not correct. Either you *did* mishear it or the person that spoke or wrote the line mixed up these two possible correct versions:
>
> And I would've gladly given it to you.
>
> And I would gladly have given it to you.
>
>
> | The only way he could have used have after using would've is as below:
>
> And I would've gladly have it given to you...
>
>
>
I am not sure about the movie's scenario, but if he was going to give it through someone but not himself, then the sentence in the script could have been as above. But either way he deliv... |
166,722 | Can I use desire in its singular form without an article before it? That is, if I write "...so also a person without desire", will that be correct? or I'll have to use "..so also a person without any desire" or "..without desires"? | 2014/04/28 | [
"https://english.stackexchange.com/questions/166722",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/64136/"
] | The only way he could have used have after using would've is as below:
>
> And I would've gladly have it given to you...
>
>
>
I am not sure about the movie's scenario, but if he was going to give it through someone but not himself, then the sentence in the script could have been as above. But either way he deliv... | 'I would've gladly have given it to you...'
It is really not correct. you would have misheard. |
53,944 | I would like to create a new race which you can play as a PC without it being too overpowered for normal game settings. I would like one with wings, but are wings (even wings with clumsy maneuverability) (or gills or claws or a prehensile tail) potentially game-breaking? And what about racial traits and size categories... | 2015/01/04 | [
"https://rpg.stackexchange.com/questions/53944",
"https://rpg.stackexchange.com",
"https://rpg.stackexchange.com/users/19360/"
] | **Rules for custom races are in the [Advanced Race Guide](http://rads.stackoverflow.com/amzn/click/1601253907).**
It uses a point-buy system for choosing size, speed, traits, spell-like abilities, etc. There are online versions [here](http://paizo.com/pathfinderRPG/prd/advancedRaceGuide/raceBuilder.html) and [here](ht... | Wings and gills for water-breathing are not game-breaking. They exist in a couple races already in Pathfinder, the [Strix](http://www.d20pfsrd.com/races/other-races/uncommon-races/arg-strix) and [Gillmen](http://www.d20pfsrd.com/races/other-races/uncommon-races/arg-gillmen) races respectively.
There is [a race builde... |
53,944 | I would like to create a new race which you can play as a PC without it being too overpowered for normal game settings. I would like one with wings, but are wings (even wings with clumsy maneuverability) (or gills or claws or a prehensile tail) potentially game-breaking? And what about racial traits and size categories... | 2015/01/04 | [
"https://rpg.stackexchange.com/questions/53944",
"https://rpg.stackexchange.com",
"https://rpg.stackexchange.com/users/19360/"
] | **Rules for custom races are in the [Advanced Race Guide](http://rads.stackoverflow.com/amzn/click/1601253907).**
It uses a point-buy system for choosing size, speed, traits, spell-like abilities, etc. There are online versions [here](http://paizo.com/pathfinderRPG/prd/advancedRaceGuide/raceBuilder.html) and [here](ht... | You can also use the [Monsters as PCs](http://www.d20pfsrd.com/races/other-races/) rules to use a creature as a player character. The creature's challenge rating (CR) acts as an effective class level, so if you picked a winged creature with a CR of 1, that is on a gross scale equivalent to a 1st level character of a PC... |
10,694 | Are there any javascript geomaps like this one (which is in flash)? <http://code.google.com/apis/visualization/documentation/gallery/geomap.html>
Thanks in advance | 2011/03/15 | [
"https://webmasters.stackexchange.com/questions/10694",
"https://webmasters.stackexchange.com",
"https://webmasters.stackexchange.com/users/3321/"
] | check out <http://mapbox.com/>, <http://www.webglearth.com/>, <http://www.chromeexperiments.com/globe> | There does not appear to be anything on code.google.com for a javascript based Visualization Geomap. The flash version is the only one. |
10,694 | Are there any javascript geomaps like this one (which is in flash)? <http://code.google.com/apis/visualization/documentation/gallery/geomap.html>
Thanks in advance | 2011/03/15 | [
"https://webmasters.stackexchange.com/questions/10694",
"https://webmasters.stackexchange.com",
"https://webmasters.stackexchange.com/users/3321/"
] | check out <http://mapbox.com/>, <http://www.webglearth.com/>, <http://www.chromeexperiments.com/globe> | The Google Maps JavaScript API makes it possible to develop a solution like this in JavaScript.
<http://code.google.com/apis/maps/documentation/javascript/reference.html> |
48,686,625 | I currently have a project at uni where I am creating an android application that is for an informal courier service where people can put jobs up and other users can bid on them. We are at the initial stages of development and are looking at the storage options and want something that will be able to be used across all... | 2018/02/08 | [
"https://Stackoverflow.com/questions/48686625",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/9333310/"
] | One brain dead way that occurs to me is to save the state of the button in your shared preferences. This way now in your on create, read the data from shared preferences and use the last stored value as the current state of the switch.
Data stored in shared preference is only deleted if
1) User uninstall and reinstal... | If there is any data class available, the state of switch can also be stored at model class level to save the state.
This way it will keep state of switch for each item in listview as well. |
48,686,625 | I currently have a project at uni where I am creating an android application that is for an informal courier service where people can put jobs up and other users can bid on them. We are at the initial stages of development and are looking at the storage options and want something that will be able to be used across all... | 2018/02/08 | [
"https://Stackoverflow.com/questions/48686625",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/9333310/"
] | One brain dead way that occurs to me is to save the state of the button in your shared preferences. This way now in your on create, read the data from shared preferences and use the last stored value as the current state of the switch.
Data stored in shared preference is only deleted if
1) User uninstall and reinstal... | Like @Vardaan Sharma mentioned above, there is a way with SharedPreferences, which saves the state persistently. This means that when the app is killed and comes back up, the state can be pulled directly from SharedPreferences.
There is also another way which is not persistent. Using the Bundle supplied by the onCreat... |
327,410 | My collection contains some MP3s which have some glitches like:
* displaying the wrong duration on loading
* minor jumps
* suddenly ending despite the duration claims another minute remaining
* noise
I'm looking for a tool that can detect as many of these glitches as possible and fix those that can be fixed (obviousl... | 2011/08/24 | [
"https://superuser.com/questions/327410",
"https://superuser.com",
"https://superuser.com/users/35237/"
] | The command-line tool [mp3val](http://mp3val.sourceforge.net/) makes quick work of scanning for, and optionally repairing, structural defects in mp3 files. I try to run it over pretty much every file in my collection, on the "can't hurt" principle. It identifies amazing numbers of ostensibly-good files with defects ran... | I assumed you already tried [the first option on google](http://checkmate.gissen.nl/) ...? Also a perl script, [mp3checker](http://icculus.org/mp3check/), that might be useful.
Edit:
As for repairing your tracks might give [MP3 Diags](http://lifehacker.com/5342197/mp3-diags-scans-and-repairs-your-mp3-collection)(link... |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | The app uses the Regional Settings of the machine it's running on, and it looks like it is your problem. You can force a thread to use a specific culture by setting System.Threading.Thread.CurrentThread.CurrentCulture and System.Threading.Thread.CurrentThread.CurrentUICulture to a specific value. | Why are you using a build server anyways, for C# code, if I may ask?
The build times for C# when I was using it were hardly noticable (<2s). Is the app really that big? |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | I have a couple questions - do both machines have identical regional settings and where are your error logs? I would hope ;-) you have exceptions being handled and written to disk, event logs .. something to help with problems like this.
Where does the date come from that is being parsed? If it is in your db maybe you... | Why are you using a build server anyways, for C# code, if I may ask?
The build times for C# when I was using it were hardly noticable (<2s). Is the app really that big? |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | It's possible that the two machines have different versions of an underlying dll that isn't part of your build process. I've seen this happen when distributing services across our internal server farm. | I have a couple questions - do both machines have identical regional settings and where are your error logs? I would hope ;-) you have exceptions being handled and written to disk, event logs .. something to help with problems like this.
Where does the date come from that is being parsed? If it is in your db maybe you... |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | It's possible that the two machines have different versions of an underlying dll that isn't part of your build process. I've seen this happen when distributing services across our internal server farm. | The same source code rarely if every builds the same program on different computers. You should always assume the programs are different, never expect them to be the same. In an environment like linux with a good package manager and periodic and or random updates, never expect the same source code to build the same pro... |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | Can you run the program on the build machine under a debugger?
If so, then debug the problem - **there's no need to guess**.
Have the debugger on the dev machine catch the exception, set a break point at the same place on the build machine. See what's different between the two. | The same source code rarely if every builds the same program on different computers. You should always assume the programs are different, never expect them to be the same. In an environment like linux with a good package manager and periodic and or random updates, never expect the same source code to build the same pro... |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | The app uses the Regional Settings of the machine it's running on, and it looks like it is your problem. You can force a thread to use a specific culture by setting System.Threading.Thread.CurrentThread.CurrentCulture and System.Threading.Thread.CurrentThread.CurrentUICulture to a specific value. | The build system probably makes a release version, while the manual build on the dev PC makes a debug version. The debug version has more error checking in it. See if you can manually build a release version and see if there are still differences. |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | It's possible that the two machines have different versions of an underlying dll that isn't part of your build process. I've seen this happen when distributing services across our internal server farm. | The build system probably makes a release version, while the manual build on the dev PC makes a debug version. The debug version has more error checking in it. See if you can manually build a release version and see if there are still differences. |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | It's possible that the two machines have different versions of an underlying dll that isn't part of your build process. I've seen this happen when distributing services across our internal server farm. | Can you run the program on the build machine under a debugger?
If so, then debug the problem - **there's no need to guess**.
Have the debugger on the dev machine catch the exception, set a break point at the same place on the build machine. See what's different between the two. |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | I've seen different "Regional and Language Options" on XP cause this sort of behavior. Do these match on both machines? Start | Settings | Control Panel | Regional and Language Options... | Why are you using a build server anyways, for C# code, if I may ask?
The build times for C# when I was using it were hardly noticable (<2s). Is the app really that big? |
86,959 | Here's the scenario:
A C# Windows Application project stored in SVN is used to create an executable. Normally, a build server handles the build process and creates builds at regular intervals which are used by testing. In this particular instance I was asked to modify a specific build and create the executable.
I'm... | 2008/09/17 | [
"https://Stackoverflow.com/questions/86959",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/14177/"
] | I've seen different "Regional and Language Options" on XP cause this sort of behavior. Do these match on both machines? Start | Settings | Control Panel | Regional and Language Options... | The same source code rarely if every builds the same program on different computers. You should always assume the programs are different, never expect them to be the same. In an environment like linux with a good package manager and periodic and or random updates, never expect the same source code to build the same pro... |
167,671 | How should I answer the question **"where have you been"?** Should a possible reply be **"I've been cleaning the garden."** or **"I was cleaning the garden."**? I mean should I use 'present perfect tense' or 'past tense'?
Note that I have just finished cleaning the garden. | 2018/05/27 | [
"https://ell.stackexchange.com/questions/167671",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/61403/"
] | "I have been cleaning the garden." and "I was cleaning the garden" are both acceptable, but neither one is present perfect or simple past. "I have been cleaning the garden." is Past Perfect Continuous, and "I was cleaning the garden." is Past Continuous. | Consider that neither of your given responses directly answers the question of where you have been. A direct answer would be, "In the garden." Instead, you have (correctly) assumed that the question implies more knowledge than simply your prior location. For example, *why* were you there?
If you understand what kind o... |
167,671 | How should I answer the question **"where have you been"?** Should a possible reply be **"I've been cleaning the garden."** or **"I was cleaning the garden."**? I mean should I use 'present perfect tense' or 'past tense'?
Note that I have just finished cleaning the garden. | 2018/05/27 | [
"https://ell.stackexchange.com/questions/167671",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/61403/"
] | "I have been cleaning the garden." and "I was cleaning the garden" are both acceptable, but neither one is present perfect or simple past. "I have been cleaning the garden." is Past Perfect Continuous, and "I was cleaning the garden." is Past Continuous. | This question is asking for a location as an answer.
Suitable short answers are:
* in the house
* at the park
* upstairs
As a full sentence, the answer will most commonly be in the simple past:
* I was inside
* I was at the park
or the past progressive:
* I was getting the car washed
* I was taking a walk |
47,530 | I was wondering what the thoughts are on wearing a prominently company X branded shirt to an interview with company X. Is this tacky? Does it look like you care more about the workplace? Is it appropriate?
Assume that the interview is casual enough to wear a normal t-shirt with no issues. | 2015/06/02 | [
"https://workplace.stackexchange.com/questions/47530",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/36642/"
] | Even if it's a casual work environment you should still dress well. Appearances do affect somebodies perception of you. I usually do full business (suit, tie, etc.) because I want to make a positive and lasting impression. Dressing well and using a strong voice will give them the impression that you are confident and p... | I think for nearly all cases, it's better to dress at least a little more formally than a company branded shirt. Also, wearing the company branded shirt will be seen as a little weird most of the time since you don't already work for the company, and very few people would expect people to be that enthusiastic for their... |
47,530 | I was wondering what the thoughts are on wearing a prominently company X branded shirt to an interview with company X. Is this tacky? Does it look like you care more about the workplace? Is it appropriate?
Assume that the interview is casual enough to wear a normal t-shirt with no issues. | 2015/06/02 | [
"https://workplace.stackexchange.com/questions/47530",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/36642/"
] | Even if it's a casual work environment you should still dress well. Appearances do affect somebodies perception of you. I usually do full business (suit, tie, etc.) because I want to make a positive and lasting impression. Dressing well and using a strong voice will give them the impression that you are confident and p... | For an interview, you probably want to dress up a little more than what you'd wear on an average day - a long-sleeved dress shirt and pants, and maybe even a tie - to show that you are interested in making a good first impression. It doesn't matter if that company or your department tend to dress down for the average w... |
47,530 | I was wondering what the thoughts are on wearing a prominently company X branded shirt to an interview with company X. Is this tacky? Does it look like you care more about the workplace? Is it appropriate?
Assume that the interview is casual enough to wear a normal t-shirt with no issues. | 2015/06/02 | [
"https://workplace.stackexchange.com/questions/47530",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/36642/"
] | Even if it's a casual work environment you should still dress well. Appearances do affect somebodies perception of you. I usually do full business (suit, tie, etc.) because I want to make a positive and lasting impression. Dressing well and using a strong voice will give them the impression that you are confident and p... | I don't think wearing company branded shirts to an interview is a good idea. Be safe and go with a suit and tie.
I once went to an interview where everyone else in the waiting area was wearing business casual or casual clothes. I'm convinced that dressing up and taking the time to show the company how important the o... |
153,172 | 
I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier, even though the inverting terminal in figure 3 is grounded. So why do we put so much emphasis on which terminal we ... | 2015/02/08 | [
"https://electronics.stackexchange.com/questions/153172",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/66222/"
] | >
> when I do the nodal analysis for the OP amp in figure 3, I end up with
> the same results as the inverting amplifier, even though the inverting
> terminal in figure 3 is grounded.
>
>
>
Your analysis is incorrect - what you have in figure 3 is a comparator with hysterisis i.e. positive feedback.
Regards you... | "*I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier,*"
Your analysis is correct! That means: You have made no calculation error - however, you have assumed (blindly?) that the opamp would work under linear and stable conditions. And th... |
153,172 | 
I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier, even though the inverting terminal in figure 3 is grounded. So why do we put so much emphasis on which terminal we ... | 2015/02/08 | [
"https://electronics.stackexchange.com/questions/153172",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/66222/"
] | >
> when I do the nodal analysis for the OP amp in figure 3, I end up with
> the same results as the inverting amplifier, even though the inverting
> terminal in figure 3 is grounded.
>
>
>
Your analysis is incorrect - what you have in figure 3 is a comparator with hysterisis i.e. positive feedback.
Regards you... | The answerer (1) is on the right track. With no signal, the circuit (3) will "saturate" at the maximum positive output voltage, depending on the source impedance. This is called: "positive feedback", which is generally not used.
Circuits (1) and (2) have negative feedback, which produces the greatest output accuracy.... |
153,172 | 
I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier, even though the inverting terminal in figure 3 is grounded. So why do we put so much emphasis on which terminal we ... | 2015/02/08 | [
"https://electronics.stackexchange.com/questions/153172",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/66222/"
] | >
> when I do the nodal analysis for the OP amp in figure 3, I end up with
> the same results as the inverting amplifier, even though the inverting
> terminal in figure 3 is grounded.
>
>
>
Your analysis is incorrect - what you have in figure 3 is a comparator with hysterisis i.e. positive feedback.
Regards you... | If one uses an op amp (or almost any kind of amplifying circuit or device) without negative feedback, small deviations in amplifier behavior may cause huge deviations in output behavior. Adding negative feedback will reduce the available gain, but reducing gain to a fraction of the open-loop gain will cause the overall... |
153,172 | 
I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier, even though the inverting terminal in figure 3 is grounded. So why do we put so much emphasis on which terminal we ... | 2015/02/08 | [
"https://electronics.stackexchange.com/questions/153172",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/66222/"
] | "*I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier,*"
Your analysis is correct! That means: You have made no calculation error - however, you have assumed (blindly?) that the opamp would work under linear and stable conditions. And th... | The answerer (1) is on the right track. With no signal, the circuit (3) will "saturate" at the maximum positive output voltage, depending on the source impedance. This is called: "positive feedback", which is generally not used.
Circuits (1) and (2) have negative feedback, which produces the greatest output accuracy.... |
153,172 | 
I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier, even though the inverting terminal in figure 3 is grounded. So why do we put so much emphasis on which terminal we ... | 2015/02/08 | [
"https://electronics.stackexchange.com/questions/153172",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/66222/"
] | "*I ask this because when I do the nodal analysis for the OP amp in figure 3, I end up with the same results as the inverting amplifier,*"
Your analysis is correct! That means: You have made no calculation error - however, you have assumed (blindly?) that the opamp would work under linear and stable conditions. And th... | If one uses an op amp (or almost any kind of amplifying circuit or device) without negative feedback, small deviations in amplifier behavior may cause huge deviations in output behavior. Adding negative feedback will reduce the available gain, but reducing gain to a fraction of the open-loop gain will cause the overall... |
45,684 | I love my Nikon d7000, takes great images. I upgraded from a 6MP D50 and one thing I was not prepared for was the huge amount of disk space that collections of 16MP files were going take up. I use Aperture 3 and now Lightroom 5 for my photography workflow. Both are great but the real bottleneck is deciding how and wher... | 2013/12/05 | [
"https://photo.stackexchange.com/questions/45684",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/4983/"
] | In general, cloud storage is only a good idea if you don't mind the idea of losing all your work. Unless you have a provider with an SLA that guarantees availability, any number of things could take out your provider and leave you high and dry. For archival purposes, the easiest and cheapest approach is always going to... | Initial upload to any cloud based system is going to be pretty painful, but with background processing and patience once it is complete, maintaining the incremental uploads are not nearly so hard.
[Amazon Glacier](http://aws.amazon.com/glacier/) is a reasonable choice, at $0.01/GB/month (slightly more for the initial... |
18,183 | Is there a way to force a page to be rendered in admin theme, Like pages that their path begins with 'admin/'? | 2011/12/23 | [
"https://drupal.stackexchange.com/questions/18183",
"https://drupal.stackexchange.com",
"https://drupal.stackexchange.com/users/2798/"
] | There is a contrib module [ThemeKey](http://drupal.org/project/themekey) that
>
> allows you to define simple or sophisticated theme-switching rules
> which allow automatic selection of a theme depending on current path,
> taxonomy terms, language, node-type, and many, many other properties.
> It can also be easil... | 1. This functionality is now in D7 core.
2. There's a module that effectively exposes "hook\_admin\_paths" to the UI:
<https://drupal.org/project/admin_theme> |
18,183 | Is there a way to force a page to be rendered in admin theme, Like pages that their path begins with 'admin/'? | 2011/12/23 | [
"https://drupal.stackexchange.com/questions/18183",
"https://drupal.stackexchange.com",
"https://drupal.stackexchange.com/users/2798/"
] | There is a contrib module [ThemeKey](http://drupal.org/project/themekey) that
>
> allows you to define simple or sophisticated theme-switching rules
> which allow automatic selection of a theme depending on current path,
> taxonomy terms, language, node-type, and many, many other properties.
> It can also be easil... | Simply give the page a path beginning with admin: 'admin/mypage' |
18,183 | Is there a way to force a page to be rendered in admin theme, Like pages that their path begins with 'admin/'? | 2011/12/23 | [
"https://drupal.stackexchange.com/questions/18183",
"https://drupal.stackexchange.com",
"https://drupal.stackexchange.com/users/2798/"
] | If you are a module developer, you can use [hook\_admin\_paths](http://api.drupal.org/api/drupal/modules!system!system.api.php/function/hook_admin_paths/7) to define which paths are to be rendered with the administration theme. | 1. This functionality is now in D7 core.
2. There's a module that effectively exposes "hook\_admin\_paths" to the UI:
<https://drupal.org/project/admin_theme> |
18,183 | Is there a way to force a page to be rendered in admin theme, Like pages that their path begins with 'admin/'? | 2011/12/23 | [
"https://drupal.stackexchange.com/questions/18183",
"https://drupal.stackexchange.com",
"https://drupal.stackexchange.com/users/2798/"
] | If you are a module developer, you can use [hook\_admin\_paths](http://api.drupal.org/api/drupal/modules!system!system.api.php/function/hook_admin_paths/7) to define which paths are to be rendered with the administration theme. | Simply give the page a path beginning with admin: 'admin/mypage' |
18,183 | Is there a way to force a page to be rendered in admin theme, Like pages that their path begins with 'admin/'? | 2011/12/23 | [
"https://drupal.stackexchange.com/questions/18183",
"https://drupal.stackexchange.com",
"https://drupal.stackexchange.com/users/2798/"
] | Simply give the page a path beginning with admin: 'admin/mypage' | 1. This functionality is now in D7 core.
2. There's a module that effectively exposes "hook\_admin\_paths" to the UI:
<https://drupal.org/project/admin_theme> |
50,074 | Over the past year or so my production platform has been plagued by an odd TCP/IP issue. I've spent zillions of hours working with competent & knowledgeable sysadmins, scouring the net, reading source code, been jerked around by RH's pathetic support, and **crying tears of blood**! To no avail. (Google ['unkn-4'](http:... | 2008/09/08 | [
"https://Stackoverflow.com/questions/50074",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/2961/"
] | Dave Miller (person in charge of networking in the linux kernel) and their fellow henchmen all inhabit the lkml or [Linux Kernel Mailing List](http://lkml.org). If you can provide a reasonably decent bug report they'll get you a reasonable answer.
On the other hand if you tell them it's a very old kernel, they'll tel... | The linux-net mailing list might interest you. There should be more details [here](http://vger.kernel.org/vger-lists.html). |
26,734 | My budgies are eating only seeds. I tried feeding them soaked wheat and chickpeas. They did not eat it. Also I am trying to feed tomato, carrot and apple, however they are not eating it.
Is there any trick to feed them other food? | 2019/12/16 | [
"https://pets.stackexchange.com/questions/26734",
"https://pets.stackexchange.com",
"https://pets.stackexchange.com/users/17019/"
] | Cats are not small dogs and can't be treated the same way; where dogs are generally social with one another, adaptable, and can easily be moved between locations for petsitting and quickly introduced to one another, cats are more solitary and do not handle disruptions to their environment well.
To your titular questio... | In general it is possible to have two neutered males together. In my opinion the first contact has to be organised. (I do not know much about cats, but have seen two neutered males living together in peace many times).
I think cats have their own areas like rabbits. For rabbits the first contact is organised in a neut... |
79,298 | I'm currently DMing a Curse of Strahd campaign (slightly modified to fit into an existing world I am slowly building (following core rule books for the most part). I am however following the setup/plot within the actual setting exactly. All encounters are done exactly as-is.
One thing I have noticed is that the challe... | 2016/04/26 | [
"https://rpg.stackexchange.com/questions/79298",
"https://rpg.stackexchange.com",
"https://rpg.stackexchange.com/users/25239/"
] | Let me start off by saying that Curse of Strahd certainly has some very challenging encounters, many of which can be stumbled into at points when the party is woefully under-levelled. I've only run it once so far, but that did end in a TPK.
>
> In Vallaki, the party has the opportunity to run into a nest of vampire ... | Have you tried checking pg. 6 of Curse of Strahd under character levels? there is a passage there that I'm not entirely sure I can repeat here without a copyright issue, but it should solve your problem.
Curse of Strahd has a specific leveling style all its own. Reading it you get the impression that the adventure wit... |
79,298 | I'm currently DMing a Curse of Strahd campaign (slightly modified to fit into an existing world I am slowly building (following core rule books for the most part). I am however following the setup/plot within the actual setting exactly. All encounters are done exactly as-is.
One thing I have noticed is that the challe... | 2016/04/26 | [
"https://rpg.stackexchange.com/questions/79298",
"https://rpg.stackexchange.com",
"https://rpg.stackexchange.com/users/25239/"
] | Have you tried checking pg. 6 of Curse of Strahd under character levels? there is a passage there that I'm not entirely sure I can repeat here without a copyright issue, but it should solve your problem.
Curse of Strahd has a specific leveling style all its own. Reading it you get the impression that the adventure wit... | Yes, Curse of Stradh is hard. (\*)
It is a scary horror themed adventure.
My L4 party is doing Death House, and I do not have to scale original stuff meant for L1-3 much.
Some things to keep in mind to make this work well:
* Session zero: Let players know there are things that go bump in the night that can kill the... |
79,298 | I'm currently DMing a Curse of Strahd campaign (slightly modified to fit into an existing world I am slowly building (following core rule books for the most part). I am however following the setup/plot within the actual setting exactly. All encounters are done exactly as-is.
One thing I have noticed is that the challe... | 2016/04/26 | [
"https://rpg.stackexchange.com/questions/79298",
"https://rpg.stackexchange.com",
"https://rpg.stackexchange.com/users/25239/"
] | Let me start off by saying that Curse of Strahd certainly has some very challenging encounters, many of which can be stumbled into at points when the party is woefully under-levelled. I've only run it once so far, but that did end in a TPK.
>
> In Vallaki, the party has the opportunity to run into a nest of vampire ... | Yes, Curse of Stradh is hard. (\*)
It is a scary horror themed adventure.
My L4 party is doing Death House, and I do not have to scale original stuff meant for L1-3 much.
Some things to keep in mind to make this work well:
* Session zero: Let players know there are things that go bump in the night that can kill the... |
16,576 | Here's a screenshot of the duty calendar in the system I'm working on (I've deleted all names here for privacy reasons).
Each person can have a day of particular type (listed in the legend above: working day, friday (i.e. shortened) etc.).
Those types are changing in a way shown in the picture: first you click in t... | 2012/01/26 | [
"https://ux.stackexchange.com/questions/16576",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/11175/"
] | **The Right Information**
Firstly, make sure your displays show the information the user needs to make good decisions and input. The use of a color-coded matrix assumes that your user is trying to achieve a certain pattern of assignments, such as a certain number of people in each duty type per day (e.g., have adequat... | Your current system is strange for 2 reasons:
1. Legend is usually an inactive element used only for reference unless it's also a filter (i.e. click a legend item to show just it).
2. A more natural workflow is to find the person, then click the date, and then set its status.
However, if your users find your system e... |
265,186 | Given the following sentence:
>
> I want you to join both the Terms and Conditions and Privacy Policy
> documents together by lunch time.
>
>
>
Is the repetition of "and" OK? Should I wrap my documents in quotation marks? | 2015/08/06 | [
"https://english.stackexchange.com/questions/265186",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/132032/"
] | The phrase *Terms and Conditions* is a widely known concept and probably won't cause confusion in your sentence. You could possibly wrap them in quotation marks to make clear that those words are the title of the document. Putting the words in *italic* would work as well.
If you really want to avoid the possible confu... | While the sentence is grammatically fine and may not be ambiguous to someone familiar with the materials, there is a possibility of not nowing how many things you are talking about joining together. As noted by others, *terms and conditions* is a unified concept and would appear in one document. *Privacy policy* is ano... |
265,186 | Given the following sentence:
>
> I want you to join both the Terms and Conditions and Privacy Policy
> documents together by lunch time.
>
>
>
Is the repetition of "and" OK? Should I wrap my documents in quotation marks? | 2015/08/06 | [
"https://english.stackexchange.com/questions/265186",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/132032/"
] | The phrase *Terms and Conditions* is a widely known concept and probably won't cause confusion in your sentence. You could possibly wrap them in quotation marks to make clear that those words are the title of the document. Putting the words in *italic* would work as well.
If you really want to avoid the possible confu... | Grammatically, everything looks good. But I agree that in terms of appearance the structure looks less than optimal.
Here are a few things you may want to consider:
1. If the message you're sending is an email, just use hyperlinks:
>
> I want you to join both the [Terms and Conditions](http://#) and [Privacy Poli... |
265,186 | Given the following sentence:
>
> I want you to join both the Terms and Conditions and Privacy Policy
> documents together by lunch time.
>
>
>
Is the repetition of "and" OK? Should I wrap my documents in quotation marks? | 2015/08/06 | [
"https://english.stackexchange.com/questions/265186",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/132032/"
] | While the sentence is grammatically fine and may not be ambiguous to someone familiar with the materials, there is a possibility of not nowing how many things you are talking about joining together. As noted by others, *terms and conditions* is a unified concept and would appear in one document. *Privacy policy* is ano... | Grammatically, everything looks good. But I agree that in terms of appearance the structure looks less than optimal.
Here are a few things you may want to consider:
1. If the message you're sending is an email, just use hyperlinks:
>
> I want you to join both the [Terms and Conditions](http://#) and [Privacy Poli... |
17,146 | Feats like Ascetic Hunter or Ascetic Rogue allow a monk to multi-class with other martial classes. Is there a feat to allow a monk to freely multi-class with a spellcaster class? I'm looking specifically for wizard, warlock, and sorcerer as representatives of prepared, invocation, and spontaneous casting classes. I fig... | 2012/10/09 | [
"https://rpg.stackexchange.com/questions/17146",
"https://rpg.stackexchange.com",
"https://rpg.stackexchange.com/users/4319/"
] | Monk Multiclassing
==================
If your group actually enforces the monk multiclassing restriction, and you want to go *back* to Monk for some reason, Monastic Training from *Eberron Campaign Setting* allows you to multiclass monk with any one other class. The only *good* use of this feat is Tashalatora (see **P... | Page 105 of Complete Adventurer has Ascetic Mage, which allows you to mix sorcerer and monk levels.
To multiclass into any class using Wizards-only material, ask to use the modifications to the Monk class made by Oriental Adventures.
Beyond that, there may be a smaller publisher which has created a similar feat. Othe... |
21 | I learned the Devanagari script and couldn't help but notice the similarity of the Om symbol ॐ to the symbols of the Devanagari writing system, like अं (never mind that this is pronounced `aṃ`).
My teacher, maybe simply as pedagogical eccentricity, was *eminent* that the **Om symbol ॐ had nothing to do with the Devana... | 2014/06/18 | [
"https://hinduism.stackexchange.com/questions/21",
"https://hinduism.stackexchange.com",
"https://hinduism.stackexchange.com/users/29/"
] | In Devanagari it is correctly written as ओं or ओ३म्. The universal representation is ॐ. Om or Aum is a combination of three sounds a (a-kāra), u (u-kāra), m (ma-kāra). A-kara means form or shape like earth, trees, or any other object. U-kāra means formless or shapeless like water, air or fire. Ma-kāra means neither sha... | I post the pictures of pages referring to the link between OM and Devanagari script as described in the book 'Hidden Horizons'.
[](https://i.stack.imgur.com/Tjm0M.jpg)
[](https://i.s... |
21 | I learned the Devanagari script and couldn't help but notice the similarity of the Om symbol ॐ to the symbols of the Devanagari writing system, like अं (never mind that this is pronounced `aṃ`).
My teacher, maybe simply as pedagogical eccentricity, was *eminent* that the **Om symbol ॐ had nothing to do with the Devana... | 2014/06/18 | [
"https://hinduism.stackexchange.com/questions/21",
"https://hinduism.stackexchange.com",
"https://hinduism.stackexchange.com/users/29/"
] | In Devanagari it is correctly written as ओं or ओ३म्. The universal representation is ॐ. Om or Aum is a combination of three sounds a (a-kāra), u (u-kāra), m (ma-kāra). A-kara means form or shape like earth, trees, or any other object. U-kāra means formless or shapeless like water, air or fire. Ma-kāra means neither sha... | Om symbol in devanagari is aum of siddham script <http://www.visiblemantra.org/om.html> & in devanagari om was written as a separate & special alphabet or symbol as per skanda puran shiv raghav samvaad <https://youtu.be/jwlB_GDEWvw> and real omkar looks like this..
My teacher, maybe simply as pedagogical eccentricity, was *eminent* that the **Om symbol ॐ had nothing to do with the Devana... | 2014/06/18 | [
"https://hinduism.stackexchange.com/questions/21",
"https://hinduism.stackexchange.com",
"https://hinduism.stackexchange.com/users/29/"
] | Your teacher is incorrect. The symbol ॐ is indeed a Devanagari ligature of ओ + ँ. It's actually represented slightly differently in Tibetan, Siddham, Bengali, Jain scripts to name a few. | I post the pictures of pages referring to the link between OM and Devanagari script as described in the book 'Hidden Horizons'.
[](https://i.stack.imgur.com/Tjm0M.jpg)
[](https://i.s... |
21 | I learned the Devanagari script and couldn't help but notice the similarity of the Om symbol ॐ to the symbols of the Devanagari writing system, like अं (never mind that this is pronounced `aṃ`).
My teacher, maybe simply as pedagogical eccentricity, was *eminent* that the **Om symbol ॐ had nothing to do with the Devana... | 2014/06/18 | [
"https://hinduism.stackexchange.com/questions/21",
"https://hinduism.stackexchange.com",
"https://hinduism.stackexchange.com/users/29/"
] | Your teacher is incorrect. The symbol ॐ is indeed a Devanagari ligature of ओ + ँ. It's actually represented slightly differently in Tibetan, Siddham, Bengali, Jain scripts to name a few. | Om symbol in devanagari is aum of siddham script <http://www.visiblemantra.org/om.html> & in devanagari om was written as a separate & special alphabet or symbol as per skanda puran shiv raghav samvaad <https://youtu.be/jwlB_GDEWvw> and real omkar looks like this.![enter image description here](https://i.stack.imgur.co... |
562,670 | Background
----------
I recently joined a small start-up after working at a large company.
I'm not a professional system administrator, however, because of my programming and systems knowledge I am now the internal person managing our servers and infrastructure.
In the past, I never needed to document our system inf... | 2009/02/18 | [
"https://Stackoverflow.com/questions/562670",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/65360/"
] | I've actually had good success with a Wiki. Use something where you can control logins easily — Mediawiki is okay, but requires some PHP hacking — and build some templates for processes, inventories, and so forth.
### Update
Actually, I must have needed coffee. [Trac](http://trac.edgewall.org/) is pretty nearly ideal... | Wikis are indeed a good approach. You can set up sharepoint for that and get nice features like update history, links that always point to current information and such. |
562,670 | Background
----------
I recently joined a small start-up after working at a large company.
I'm not a professional system administrator, however, because of my programming and systems knowledge I am now the internal person managing our servers and infrastructure.
In the past, I never needed to document our system inf... | 2009/02/18 | [
"https://Stackoverflow.com/questions/562670",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/65360/"
] | I've actually had good success with a Wiki. Use something where you can control logins easily — Mediawiki is okay, but requires some PHP hacking — and build some templates for processes, inventories, and so forth.
### Update
Actually, I must have needed coffee. [Trac](http://trac.edgewall.org/) is pretty nearly ideal... | If you use something like [Puppet](http://reductivelabs.com/trac/puppet/), (or Chef, or CFEngine, etc.) to build and manage your machines, then most of the runbook contents can live inside the puppet config, leaving you with a lot less stuff (just the location and password for the puppetmaster, if you take it to extrem... |
20,219 | I have a Google+ Share button for each article on my website.
At the moment, when I try to use it, Google+ uses an unrelated image in my document (probably the first one in the document above a certain size) as the thumbnail shown in the feed.
I'd like to specify a thumbnail url to use instead. I used [the +1 button... | 2011/09/28 | [
"https://webmasters.stackexchange.com/questions/20219",
"https://webmasters.stackexchange.com",
"https://webmasters.stackexchange.com/users/2777/"
] | The reason that your specified thumbnail image is not being picked up is because Google+ doesn't like small images (<170px width).
If you link to the full-size image instead of the thumbnail and let G+ do the resizing it will work. I've tested your code with a larger image from your site and it seems to work.
**Refer... | Write an IMG tag with the right thumb at the beginning of the body and make the the css to display:none
Don't forget that the article thumb may be cached already so it will work only for further articles and/or after cache expiration. |
48,162 | Anyone know of a keyboard that has **both** a fingerprint and smart card reader and is FIPS 201 compliant?
**Edit**: I'm looking for a product that is currently on the market and certified. | 2009/09/28 | [
"https://superuser.com/questions/48162",
"https://superuser.com",
"https://superuser.com/users/4953/"
] | Athena Smartcard Solutions do have a combo keyboard. It will be FIPS certified in Q4.
You are welcome to call us at +1 408 914 2808 or write to sales@athena-scs.com
Thanks | Not sure about the FIPS 201 compliance, but [Cherry](http://www.cherrycorp.com/) has keyboards with a fingerprint reader and a smartcard reader, like the [G83-14201](http://www.cherrycorp.com/english/keyboards/Security/Biometric_Keyboards/14201.htm) and the [G83-14401](http://www.cherrycorp.com/english/keyboards/Securi... |
297,214 | Assuming a hole (channel) and and an extrusion are made of **same material and have the same diameter**, why pushing water into a narrow channel is more difficult than pushing a rod (extrusion) into water?
Assuming vacuum environment (no air trapped inside the channel), since the surface tension is the same and the co... | 2016/12/07 | [
"https://physics.stackexchange.com/questions/297214",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/60857/"
] | Pushing water through a narrow channel, the water movement all happens in close proximity to, and relative to, the channel surface. You get viscous drag that creates a backpressure against whatever pumps the liquid.
Pushing a needle into free water, however, a layer of adjacent water may freely move with the needle, ... | pushing water is difficult because in narrow pathway the water molecules will exert more force on the wall of narrow tube so due to this the liquid friction "Viscosity" will be more at the surface then at inside but on the other side
a needel have very less pointing area which have minimum contact with water molecules ... |
699,880 | I have a problem managing a power scheme for windows server 2003. I constantly goes to hibernate mode. I have changed the power management from Control Panel, but when I log in again the scheme have been changed.
Is there a way to change the group policy or some registry entry in order to keep the server always Up.
Th... | 2015/06/18 | [
"https://serverfault.com/questions/699880",
"https://serverfault.com",
"https://serverfault.com/users/294868/"
] | You may check the BIOS settings to make sure that suspend mode isn't enabled.
Take a look at your power management by using this command : *powercfg /query*
If the Control Panel doesn't affect your power configuration also try *powercfg /hibernate off*
Hope this help. | I think there might be a policy that some user logs in and the operating system accept the policy from the user. Is there any way to change this? |
44,405,819 | We have big enough project which is built up with Swift 2.x and now Apple has just released Swift 4 so to move forward for latest version of Swift which path we can choose...
**Do we need to migrate our code to Swift 3 first? Or we can directly migrate our code to Swift 4 using Xcode 9?** | 2017/06/07 | [
"https://Stackoverflow.com/questions/44405819",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1288353/"
] | Yes, you must migrate your code in Swift 3 compatible version. Xcode 9 allows conversion/migration from swift 3.0 only.
[](https://i.stack.imgur.com/gem0b.png)
Swift 3.2 is supported by Xcode 9 & Xcode 8 both.
[](https://i.stack.imgur.com/4lwMv.png) |
44,405,819 | We have big enough project which is built up with Swift 2.x and now Apple has just released Swift 4 so to move forward for latest version of Swift which path we can choose...
**Do we need to migrate our code to Swift 3 first? Or we can directly migrate our code to Swift 4 using Xcode 9?** | 2017/06/07 | [
"https://Stackoverflow.com/questions/44405819",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1288353/"
] | Yes, you first need to migrate your code from Swift 2 to Swift 3, using Xcode 8.
Xcode 8 is the last version to support Swift 2.
Starting with Xcode 9, the supported Swift versions are 3.2 and 4
[](https://i.stack.imgur.com/4lwMv.png) | Yes, you need old versions of Xcode . Old version are available here <https://developer.apple.com/download/more/> |
44,405,819 | We have big enough project which is built up with Swift 2.x and now Apple has just released Swift 4 so to move forward for latest version of Swift which path we can choose...
**Do we need to migrate our code to Swift 3 first? Or we can directly migrate our code to Swift 4 using Xcode 9?** | 2017/06/07 | [
"https://Stackoverflow.com/questions/44405819",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1288353/"
] | Yes, you must migrate your code in Swift 3 compatible version. Xcode 9 allows conversion/migration from swift 3.0 only.
[](https://i.stack.imgur.com/gem0b.png)
Swift 3.2 is supported by Xcode 9 & Xcode 8 both.
[?
Given the following quote from [OpenSSL.org](https://www.openssl.org/news/secadv/20160301.txt)
>
> Users can avoid this issue by disabling the SSLv2 protocol in all their SSL/TLS
> servers, if the... | 2016/05/18 | [
"https://Stackoverflow.com/questions/37307383",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/5971390/"
] | As long as you've disabled SSLv2 on all of your servers, they are protected from the DROWN attack.
Note that if you have even one server with SSLv2 enabled, and you share keys - for example by using wildcard certificates, which is very common - then even your servers that have SSLv2 disabled become vulnerable, because... | DROWN can only attack servers that use SSLv2. So disabling that protocol will protect that server - providing the same key is not used elsewhere.
However that's not to say there won't be some future vulnerability or bug that effectively re-enables SSLv2 or such like even if you've configured it off, so best to patch o... |
43,340 | In the brig of the sandship, there is a directional lock.
There are ship wheels on the ground which surely reveal the correct order. I see that they have red spokes which signify the order to read them, but when I try the directions they show (LEFT ... | 2011/12/22 | [
"https://gaming.stackexchange.com/questions/43340",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/2885/"
] | Instead of giving it away, I'll start by giving you a hint, followed by the issue you are having in spoiler tags, and finally followed by the answer in spoiler tags at the bottom.
My hint is to look at the ship wheels hanging on the wall next to the door.
>
> The issue you have is that you are reading the ship whee... | The red spokes go on top, and the blue arrow is the right direction |
20,860,426 | When I'm trying to authenticate a user it tells me I need a valid redirect uri.
Where can I change, fix or add it?
I am using the Deezer javascript SDK.
Thanks. | 2013/12/31 | [
"https://Stackoverflow.com/questions/20860426",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/3144615/"
] | You have to complete 2 steps:
* Create an application on <http://developers.deezer.com>
* Set the right domain for that application. For example, YOUR\_APPLICATION\_DOMAIN.com is right, <http://www.YOUR_APPLICATION_DOMAIN.com> is wrong.
Setting a wrong application domain in the Edit section of your application will m... | I got the same error until I removed the http:// from the "application domain" parameter defined at developers.deezer.com.
ie. use: application domain: subdomain.example.com rather than <http://subdomain.example.com> |
2,411,288 | I'm having problems understanding Java versioning. I'm seeing lots of versions like 1.4.2, 1.5 and 1.6, but I also stumble upon 5.0 and 6.0. I don't understand this versioning or the progression.
I'm pretty new to Java, and I've read a bit about [OpenJDK](https://en.wikipedia.org/wiki/OpenJDK) vs Sun, and I think I un... | 2010/03/09 | [
"https://Stackoverflow.com/questions/2411288",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/74389/"
] | [Both 1.6 and 6 are used](http://en.wikipedia.org/wiki/Java_version_history#J2SE_5.0_.28September_30.2C_2004.29) to refer to the same version (and similarly for 1.5 and 5). | [Guide to java versions](https://dzone.com/articles/a-guide-to-java-versions-and-features) is the best blog for any new person to understand java versioning
Since 2019, Java releases new version every 6 months, i.e. March and September.
It's October 2021, and Java 17 is already released. Here is the link to dow... |
2,411,288 | I'm having problems understanding Java versioning. I'm seeing lots of versions like 1.4.2, 1.5 and 1.6, but I also stumble upon 5.0 and 6.0. I don't understand this versioning or the progression.
I'm pretty new to Java, and I've read a bit about [OpenJDK](https://en.wikipedia.org/wiki/OpenJDK) vs Sun, and I think I un... | 2010/03/09 | [
"https://Stackoverflow.com/questions/2411288",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/74389/"
] | This is explained (cough) in [Java SE Naming and Versions](http://java.sun.com/javase/namechange.html):
>
> The current release is Java Platform,
> Standard Edition 6 (Java SE 6). The
> previous release was Java 2 Platform,
> Standard Edition 5.0 (J2SE 5.0).
>
>
> Sun Microsystems simplified the
> platform name in ... | * Java 1.5.x is the same as Java 5.x
* Java 1.6.x is the same as Java 6.x
Basically throw away the 1. part of the version number. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.