qid int64 1 74.7M | question stringlengths 12 33.8k | date stringlengths 10 10 | metadata list | response_j stringlengths 0 115k | response_k stringlengths 2 98.3k |
|---|---|---|---|---|---|
70,279 | When you visit an aquarium, you see different species of marine life in different 'sections.' They are usually surrounded by glass.
I want to build sentences like this:
>
> I walked to another '**glass/section**.' In it, I could see a many
> sting rays."
>
>
> The shark whale swam from one corner of the '**glass... | 2012/06/07 | [
"https://english.stackexchange.com/questions/70279",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/4070/"
] | Both of your examples at the end are fine, but I think the word you might be looking for is **tank**, which fits perfectly in all three of your constructions at the beginning of your question.
If you want to be consistent, (though you don't need to be in this case), you'd need to reform your later sentences to
>
> ... | I do believe that **tank** is a great answer, **water tank** to be more precise (there are gas tanks too). The glass you are looking through is called glass window (don't have idea why). But when you go to see different species of marine life you go to place with different [maricultures](http://en.wikipedia.org/wiki/Ma... |
70,279 | When you visit an aquarium, you see different species of marine life in different 'sections.' They are usually surrounded by glass.
I want to build sentences like this:
>
> I walked to another '**glass/section**.' In it, I could see a many
> sting rays."
>
>
> The shark whale swam from one corner of the '**glass... | 2012/06/07 | [
"https://english.stackexchange.com/questions/70279",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/4070/"
] | Both of your examples at the end are fine, but I think the word you might be looking for is **tank**, which fits perfectly in all three of your constructions at the beginning of your question.
If you want to be consistent, (though you don't need to be in this case), you'd need to reform your later sentences to
>
> ... | What about "exhibit"? Or are you talking about different **sections** of the same **tank**? |
70,279 | When you visit an aquarium, you see different species of marine life in different 'sections.' They are usually surrounded by glass.
I want to build sentences like this:
>
> I walked to another '**glass/section**.' In it, I could see a many
> sting rays."
>
>
> The shark whale swam from one corner of the '**glass... | 2012/06/07 | [
"https://english.stackexchange.com/questions/70279",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/4070/"
] | Both of your examples at the end are fine, but I think the word you might be looking for is **tank**, which fits perfectly in all three of your constructions at the beginning of your question.
If you want to be consistent, (though you don't need to be in this case), you'd need to reform your later sentences to
>
> ... | I don't recall aquariums using the word "tank" or "water tank". I believe the word of choice is "habitat". |
70,279 | When you visit an aquarium, you see different species of marine life in different 'sections.' They are usually surrounded by glass.
I want to build sentences like this:
>
> I walked to another '**glass/section**.' In it, I could see a many
> sting rays."
>
>
> The shark whale swam from one corner of the '**glass... | 2012/06/07 | [
"https://english.stackexchange.com/questions/70279",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/4070/"
] | What about "exhibit"? Or are you talking about different **sections** of the same **tank**? | I do believe that **tank** is a great answer, **water tank** to be more precise (there are gas tanks too). The glass you are looking through is called glass window (don't have idea why). But when you go to see different species of marine life you go to place with different [maricultures](http://en.wikipedia.org/wiki/Ma... |
70,279 | When you visit an aquarium, you see different species of marine life in different 'sections.' They are usually surrounded by glass.
I want to build sentences like this:
>
> I walked to another '**glass/section**.' In it, I could see a many
> sting rays."
>
>
> The shark whale swam from one corner of the '**glass... | 2012/06/07 | [
"https://english.stackexchange.com/questions/70279",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/4070/"
] | What about "exhibit"? Or are you talking about different **sections** of the same **tank**? | I don't recall aquariums using the word "tank" or "water tank". I believe the word of choice is "habitat". |
18,293 | I recently found that the drainage system for the gutter runoff is completely clogged. It has roots running through it. I dug up the drain 15 feet (5 yards) away from the house and it is still clogged in both directions. I tried clearing it with a hand held plumber's snake and a pressure washer but I did not have much ... | 2012/09/21 | [
"https://diy.stackexchange.com/questions/18293",
"https://diy.stackexchange.com",
"https://diy.stackexchange.com/users/7515/"
] | You could try hiring an electric eel
or get a plumber with a jetter
But either of these options may still not work it the pipe is broken or snapped and the two sections of pipe are now ofset f... | I would abandoned it and dig a new pipe system. I would try and get a 20' piece of the light green PVC pipe. The roots are looking for water, this way the roots will only try to enter every 20'. I would not use any black flexible pipe.
Another thing to consider is run a piece of pipe or downspout on top of the surfac... |
33,032 | We're trying to avoid adding another page in the hierarchy. (basically a results page with a Back button). A few things....
1. displaying the results on the same page as the search input field isn't an option. The page is already full of content.
2. Search results could/would be paginated.
**search page**:
![search ... | 2013/01/16 | [
"https://ux.stackexchange.com/questions/33032",
"https://ux.stackexchange.com",
"https://ux.stackexchange.com/users/7727/"
] | It's not a good idea to display data in a "modal" window. The behavior of a "modal" window isn't well defined on the web. In some cases a window that looks modal can disappear when you click anywhere outside it. It can invoke anxiety in the user - "I must be careful no to close this window or I'll lose the data". The d... | Can the modal window still disappear if the user clicks elsewhere? Or do they need to click somewhere inside in order to continue? If that's the case: don't.
I think I have an understanding what you are trying to do here. Basically you want the user to see search results, but you don't want them to navigate to a sepa... |
118,501 | I have a dataset of 20 Landsat scenes (MSS, TM, ETM+) for 20 years (one scene per year). Scenes are in WGS 84, EPSG 32634 coordinate system and I can easily project = geometrically correct them to S\_JTSK, EPSG 5514, using **Project raster Tool** (Data Management in ArcGIS 10.1).
As my area of interest is in mountain... | 2014/10/16 | [
"https://gis.stackexchange.com/questions/118501",
"https://gis.stackexchange.com",
"https://gis.stackexchange.com/users/21692/"
] | Answer for others so confused people as I am:
**To know how to deal with downloaded raw Landsat data - what else in pre-processing do I need?**
Firstly check their processing level in\_MTL.txt file (included in downloaded Landsat image: <http://landsat.usgs.gov/Landsat_Processing_Details.php>)
Processing level = **D... | I suggest you refer to the following publication: C. Devaraj and C.A. Shah, 2014. Automated geometric correction of Landsat MSS L1G imagery, IEEE Geoscience and Remote Sensing Letters, 11(1): 347-351. |
25,595,683 | I've spent 5 hours trying to resolve this issue. I've used every suggestive link that was relevant to my issue that Google listed. Nothing seems to work.
The OS is CentOS 6.5 and has Apache, PHP, and MySQL installed. I have several WordPress intranet sites working for almost a year with my subdomain xxxxx.xxxx.com.
... | 2014/08/31 | [
"https://Stackoverflow.com/questions/25595683",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1617879/"
] | i faced the same problem with my centos 7 installtion with php-fpm ..
the solution was to install php-gd and php-pdo packages. those were the essential packages somehow required to make this all work.. good day | "Your PHP installation appears to be missing the MySQL extension which is required by WordPress."
For others who may run across this same problem. The majority of the help I found Googling the problem dealt with editing the php.ini to uncomment the MySql extensions. Some even go as far as to say that there is only one... |
24,203,315 | I want to offer my app free for a period and then charge to continue using it. I understand that the way to do this is to force the user to buy an In-App product after the free period. However, if I simply record the date that the user starts using the app in the standardUserDefaults and use this to calculate when the ... | 2014/06/13 | [
"https://Stackoverflow.com/questions/24203315",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/3537846/"
] | You are not allowed to limit you app for free for a limited period:
>
> **11.9** Apps containing content or services that expire after a limited time will be rejected, except for specific approved content (e.g.
> films, television programs, music, books)
>
>
>
If you want to risk it, you could save the date (enc... | This does not seem entirely consistent with:
>
> Communicate the value of your products to your users. Users want to
> know exactly what they’re going to buy. Combine information from the
> App Store, such as product prices and descriptions, with additional
> data from your server or the app bundle, such as images... |
162,817 | Does muzzle velocity refer to the velocity of the bullet with respect to ground or the velocity with respect to the gun? | 2015/02/01 | [
"https://physics.stackexchange.com/questions/162817",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/56263/"
] | It is the velocity with respect to the end of the gun barrel. However, it is probably an imprecise term because if you want it down to the mm/s you would have to subtract the recoil speed of the gun. In practice people just measure the velocity with respect to a closely spaced meter on the bench and assume the gun reco... | Muzzle speed of the bullet means velocity of the bullet with respect to the velocity of the gun. |
52,603,387 | I am stuck at the moment. I am creating a sports database in MS Access for our sports club and have the following question...
So what I have:
Tbl\_Player (Player\_ID, Firstname, Lastname, position, Min\_Played, Goal, Assist, Yellow, Red)
Tbl\_Player\_Match (FK Tbl\_Player\_Player\_ID, Min\_Played, Goal, Assist, Yello... | 2018/10/02 | [
"https://Stackoverflow.com/questions/52603387",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/10444632/"
] | You are correct that the initialization option *CBCentralManagerOptionShowPowerAlertKey*, which should display a warning if the framework is initiated when bluetooth is turned off, does in fact not work as expected if bluetooth is toggled off from the Control Center. Since iOS 11 the system will actually **not** turn o... | I have filed bug report 47516284 with Apple for this problem. Here's the text of the issue I filed.
I have noticed that the system alert notifying a user that an app needs Bluetooth will show when I turn off Bluetooth using the Settings app. I can use this system alert to go directly to bluetooth settings to turn it b... |
41,165,625 | I'm implementing a notifications feature in an html5 web app I'm working on.
The feature requirements is to receive push notifications (strings) from the server and display them immediately on the user interface (to all clients), without saving them anywhere else.
I'm looking for a managed service on Azure cloud that... | 2016/12/15 | [
"https://Stackoverflow.com/questions/41165625",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/3025527/"
] | It sounds like you want to implement a real-time notification feature for HTML5 App without any middleware like WebApp in Node/SignalR to connect a message queue like EventHubs. However, there seems to be not any solution for the needs without any backend services as HTTP middleware for browser if using EventHubs or ot... | Chrome M52 and beyond started supporting the VAPID protocol, refer to <https://chromestatus.com/feature/5573539073622016>.
It seems that Azure does not yet provide VAPID support. As an alternative you can look into Firebase Cloud Messaging (FCM) which you can connect with Azure Notification Hub.
More on Firebase Clou... |
22,608 | I would like to use a 4.2V(voltage varies from 3.6v up to 4.2v) Li battery to power a Pi - for this it seems like I would need a DC-DC boost converter.
From what I found, all of those seem to create very high, unregulated voltages. I would imagine that a phone that can act as a USB host has such a circuit and allows p... | 2014/08/06 | [
"https://raspberrypi.stackexchange.com/questions/22608",
"https://raspberrypi.stackexchange.com",
"https://raspberrypi.stackexchange.com/users/19227/"
] | You could build a boost converter using a [TPS61030 boost converter from TI](http://www.ti.com/product/tps61030) or you could use [this product](https://www.adafruit.com/products/2030) that uses it.
Personally I would be nervous using a cheap converter from ebay to power my RPi. | That is a sensitive matter, cause you need both a battery charger and (generally) a buck/boost converter - due to the varying voltages of the battery. I recently found this Aliexpress UPS (<https://pt.aliexpress.com/item/1005002519021541.html>) that does both, beautifully.
Have been testing it for couple of days witho... |
526,485 | Imagine you are with a group of friends. You say something and you get reactions back, which you think are negative but are actually the truth. You constantly think/worry people are thinking negatively about you.
What is this called? And I am not referencing to *worrying* because that is too abstract. | 2020/02/29 | [
"https://english.stackexchange.com/questions/526485",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/143907/"
] | Assuming you are wrong and people are not thinking negatively about you, in its simplest form you can call it **"low self-esteem"** as suggested in one of the comments. Such unrealistic feelings or delusions can be part of a major psychiatric disorder like paranoia. | **"Self-conscious," "paranoid,"** or **"insecure"** could all work in this context, assuming that their friends' claims are *not actually* being negative.
>
> Self-conscious - "Uncomfortably conscious of oneself as an object of the observation of others." [[Merriam-Webster](https://www.merriam-webster.com/dictionary/... |
127,114 | In my home network , i have dd-wrt router in another room , which bridges wifi from main home router (linksys) to the computers wired behind dd-wrt router.
Now I cannot ssh from my laptop ( connected to linksys wifi) to the computers behind dd-wrt wifi bridge. I am able to ping the individual computers behind the dd-... | 2010/04/03 | [
"https://superuser.com/questions/127114",
"https://superuser.com",
"https://superuser.com/users/-1/"
] | You probably have to enable [port forwarding](http://portforward.com/) on the dd-wrt router in order to SSH to the computer behind it. You could also check any firewall settings on the other computer to make sure that the ports aren't being blocked, though if it responds to pings I doubt that is the issue. | Recommend the remote DD-WRT device be used in [Bridge-Repeater mode](http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge). This would ensure that all devices are playing on the same field. |
66,024 | I'm finishing my bachelor's in physics and for my masters, where I have a few free choice courses (~5), I'd like to take math courses that would be relevant for a future as a theoretical physicist or applied mathematician.
Rigorously (as in taught by mathematicians) I've had Calculus, Calculus in R^n, Complex Analysis... | 2016/03/30 | [
"https://academia.stackexchange.com/questions/66024",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/51579/"
] | So far as I can tell, and [have read online](https://scholarlyoa.com/2013/01/25/omics-predatory-meetings/), predatory conferences typically are associated with an actual event.
To my mind, this seems to be a key difference between "predatory" and "fraudulent." If a conference takes your money and no event is organize... | Yes, in these cases the event is organized but the quality is poor, since no one important in the field goes to that conference. An example from this [website](http://quantum.info/conf/) with scam conferences to be avoided.
From [here](http://quantum.info/conf/):
>
> "waset are a known predatory publisher, run by a ... |
68,054 | I know it sounds like a foolish question but I have a reason for asking and I'm hoping someone here, can give a convincing response.
Here is why I pose the question...it seems to me that all this discussion of photons, and other sub-atomic particles possessing mass or negative mass is really a discussion about the mas... | 2013/06/14 | [
"https://physics.stackexchange.com/questions/68054",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/25814/"
] | The most efficient way to produce photon from electricity would be heating. Now the question is about collimating the emitted waves with the lowest mass possible.
How about a really narrow parabolic reflector made of flexible gold plated polymer. You may do away with supporting structures by using the light pressure t... | One possible solution is a heater pad with a honeycomb (made out of a materiel that is a good blackbody and a poor conductor) stacked on it. I don't know the math needed to show that it will work but I suspect that this will result in an "effective surface temperature" that is strong a function of the angle from the ax... |
68,054 | I know it sounds like a foolish question but I have a reason for asking and I'm hoping someone here, can give a convincing response.
Here is why I pose the question...it seems to me that all this discussion of photons, and other sub-atomic particles possessing mass or negative mass is really a discussion about the mas... | 2013/06/14 | [
"https://physics.stackexchange.com/questions/68054",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/25814/"
] | The most efficient way to produce photon from electricity would be heating. Now the question is about collimating the emitted waves with the lowest mass possible.
How about a really narrow parabolic reflector made of flexible gold plated polymer. You may do away with supporting structures by using the light pressure t... | In my opinion the most efficient way to turn electricity into thrust is by using lasers. From what I know laser beams are the most collimated forms of light. |
387,557 | Question about an analysis that was done for a study I'm reviewing:
The study compared two methods of taking patient core temperature around surgery at a single center; Apx. N=200, temp was taken for all patients at 4 timepoints (pre, intraop, post1, post2) simultaneously with both systems.
The write-up says they use... | 2019/01/16 | [
"https://stats.stackexchange.com/questions/387557",
"https://stats.stackexchange.com",
"https://stats.stackexchange.com/users/132693/"
] | When the same patient provides repeated response measurements over time (e.g., core temperature), the use of a random patient effect is a natural way to capture the within-patient correlation (or similarity) of those measurements over time.
Mixed Model Anova is an analysis which can be applied to analyze repeated mea... | You *would* use patient as a random effect because there are repeated measures within each patient. This means that observations within one patient may be more similar to each other than observations between patients. In other words there will be correlation within each cluster (patient). In order to handle this non-in... |
104,045 | In Windows, is active directory required for using "Domain" instead of "workgroup"? Do I need to register a domain with a DNS provider like godaddy?
What I really want to do is set up my home LAN so that everyone connecting to the main router (which is everyone, which is about 30 people) can see each other.
I've trie... | 2010/02/03 | [
"https://superuser.com/questions/104045",
"https://superuser.com",
"https://superuser.com/users/8628/"
] | A Windows domain requires a machine running Windows Server acting as a domain controller and maintaining an Active Directory database. Unless you have a machine dedicated to this role, you won't be able to join the computers to a domain.
To make an ad hoc group of computers able to share files with each other, you pro... | A Windows Domain does *NOT* require a Windows server, or even Active Directory for that matter. It is possible to setup Samaba as an NT4-style Domain Controller. This still permits full computer management, including centralized password management.
This said however, does not make it easy. Setting up Samba is always... |
1,501,864 | So I was given this question
Choose any 3-digit number xyz and write it after itself as follows:
xyzxyz. Check whether it is divisible by 7,11, 13.
Is an arbitrary number of the form xyzxyz divisible by 7, 11, 13?
I am completely lost by this question. I seen divisibility of prime numbers and how to work with it, bu... | 2015/10/28 | [
"https://math.stackexchange.com/questions/1501864",
"https://math.stackexchange.com",
"https://math.stackexchange.com/users/273306/"
] | QIf the 6-digit number 479xyz is exactly divisible by 7, 11 and 13, then
Problem Solving :
Any number is divisible by 7, 11, 13 when it is written in the form of xyzxyz. Hence x =4, y=7, z=9.
We can take any whole number for value of x,y and z
**Why & How ?**
Explanation step-by -step
First,
Let's find the LCM ... | Here's a handy proof to remember for divisibility by 7,11 and 13.
Remember lcm(7,11,13) = 7 \* 11 \* 13 since all the three numbers are co-primes.
Any integer n can be written as n = 1000q+r ---{ 0=<r<=999]
So, n = 1000(q - r) + 1001r
Since 7 \* 11 \* 13 = 1001.
7 \* 11 \* 13 | q-r -- [ if 7 \* 11 \* 13 ... |
20,442 | What is the role of the dialogue editor in volume automation and noise reduction in movie post production?
Thanks,
Eduardo | 2013/09/26 | [
"https://sound.stackexchange.com/questions/20442",
"https://sound.stackexchange.com",
"https://sound.stackexchange.com/users/6001/"
] | It depends on the agreements made between the dialogue editor/supervisor and the sound supervisor. Mixers could prefer to not have volume automation, but this differs.
Why do you ask? Are you editing dialogue? Or are you mixing the movie?
Recommended reading:
[Dialogue-Editing-Motion-Pictures](http://rads.stackoverfl... | Another thing about Noise:
When I do Dialogue Editing I always search the recordings for pieces of short atmosphere if no extra atmosphere was recorded. Then I save them and deliver them in a folder for each scenery. So the re-recording mixer has a gap-filler if needed.
IMHO its better to stick to the natural noise t... |
20,442 | What is the role of the dialogue editor in volume automation and noise reduction in movie post production?
Thanks,
Eduardo | 2013/09/26 | [
"https://sound.stackexchange.com/questions/20442",
"https://sound.stackexchange.com",
"https://sound.stackexchange.com/users/6001/"
] | I usually have my Dial editors only do very basic level adjustments. Basically lower any really loud pfx or a line that is dramatically out of sorts with the rest of the scene. With noise reduction, I never want my editor to do any broadband NR or notch filtering. You can get into a lot of unnecessary processing that m... | Another thing about Noise:
When I do Dialogue Editing I always search the recordings for pieces of short atmosphere if no extra atmosphere was recorded. Then I save them and deliver them in a folder for each scenery. So the re-recording mixer has a gap-filler if needed.
IMHO its better to stick to the natural noise t... |
20,442 | What is the role of the dialogue editor in volume automation and noise reduction in movie post production?
Thanks,
Eduardo | 2013/09/26 | [
"https://sound.stackexchange.com/questions/20442",
"https://sound.stackexchange.com",
"https://sound.stackexchange.com/users/6001/"
] | Several things a dialog editor can and should do with level automation...
* smooth out transitions between handles on different takes
* keep dialog levels roughly consistent between takes
* reduce loud momentary sounds
* gently reduce annoyingly loud constant background sounds around dialog, but not during it
I don't... | Another thing about Noise:
When I do Dialogue Editing I always search the recordings for pieces of short atmosphere if no extra atmosphere was recorded. Then I save them and deliver them in a folder for each scenery. So the re-recording mixer has a gap-filler if needed.
IMHO its better to stick to the natural noise t... |
19,006 | I bought this rain cover for my Canon 400D with a grip, a 18-200 mm lens and a Speedlite 580EX II.
[](https://i.stack.imgur.com/TjQGR.jpg)
I was first considering making my own that would look like AquaTech ones but this one was cheap enough so I said what the hell...... | 2012/01/10 | [
"https://photo.stackexchange.com/questions/19006",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/-1/"
] | I'd go for a LensCoat RainCoat:
<http://www.lenscoat.com/raincoat-c-34.html>
It has a velcro bottom closure for tripod and access to the zoom. Slip your hand up there, and you'd be all set. | [ThinkTank Photo](http://thinktankphoto.com) makes a line of rain gear products. [Hydrophobia](http://www.thinktankphoto.com/categories/rain-covers/hydrophobias.aspx) looks like what you want: it specifically has openings for your hands to make camera access easy, and it's big enough to extend with a lens as it's lengt... |
19,006 | I bought this rain cover for my Canon 400D with a grip, a 18-200 mm lens and a Speedlite 580EX II.
[](https://i.stack.imgur.com/TjQGR.jpg)
I was first considering making my own that would look like AquaTech ones but this one was cheap enough so I said what the hell...... | 2012/01/10 | [
"https://photo.stackexchange.com/questions/19006",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/-1/"
] | I'd go for a LensCoat RainCoat:
<http://www.lenscoat.com/raincoat-c-34.html>
It has a velcro bottom closure for tripod and access to the zoom. Slip your hand up there, and you'd be all set. | UWA Marine makes a line of waterproof flexible housings for surf, poolside, kayaking, etc. (i.e., *not* deep-diving) for DSLRs.
Their [U-BFXZ100 housing](https://www.ewa-marine.com/products/photo/slr/u-bfxz100/) can accommodate a pro body with grip and attached flash, with a zoom lens with a maximum front-to-rear dime... |
19,006 | I bought this rain cover for my Canon 400D with a grip, a 18-200 mm lens and a Speedlite 580EX II.
[](https://i.stack.imgur.com/TjQGR.jpg)
I was first considering making my own that would look like AquaTech ones but this one was cheap enough so I said what the hell...... | 2012/01/10 | [
"https://photo.stackexchange.com/questions/19006",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/-1/"
] | [ThinkTank Photo](http://thinktankphoto.com) makes a line of rain gear products. [Hydrophobia](http://www.thinktankphoto.com/categories/rain-covers/hydrophobias.aspx) looks like what you want: it specifically has openings for your hands to make camera access easy, and it's big enough to extend with a lens as it's lengt... | UWA Marine makes a line of waterproof flexible housings for surf, poolside, kayaking, etc. (i.e., *not* deep-diving) for DSLRs.
Their [U-BFXZ100 housing](https://www.ewa-marine.com/products/photo/slr/u-bfxz100/) can accommodate a pro body with grip and attached flash, with a zoom lens with a maximum front-to-rear dime... |
194,575 | I am by no means an expert in the realm of physics. I do from time to time, try to understand the concepts of modern physics and their applications.
I came across [this](https://youtu.be/_8bhtEgB8Mo) video that I am currently watching, and in the beginning it explains what would happen to someone if they crossed over ... | 2015/07/17 | [
"https://physics.stackexchange.com/questions/194575",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/86152/"
] | I will try and answer this in a very simple way. I think you are missing a crucial piece here. It is true that from the perspective of a remote "outside" observer (Bob) the person falling into the black hole (Alice) will never cross the horizon. However from Alice's perspective, nothing unusual will happen (in terms of... | If 0celo7 didn't make sense to you: Nothing special happens to the observer that crosses the horizon (according to classical GR), he just falls in and gets crushed.
It appears like someone is "stuck" to someone *outside* the black hole, but in a sense that are just photons that were massively delayed by the gravitatio... |
137,613 | I want a system, where a tank moves and rotates based on the speeds I give him for the two tracks, for example, if I give the left track a speed of 1 and the right one a speed of -1, then I want the tank to stay still and rotate right, while if I give the left track 1 and the right track -0.5, I want it to rotate, but ... | 2017/02/19 | [
"https://gamedev.stackexchange.com/questions/137613",
"https://gamedev.stackexchange.com",
"https://gamedev.stackexchange.com/users/87544/"
] | Disclaimer: this is based on intuition only, and there's definitely a missing piece for it to be mathematically exact. However, as far as I can tell, it should be a good enough approximation for small displacement values.
The idea is that the center of each tread describes a perfect motion, without skidding. Let's dra... | Have a vector for each wheel and then calculate the cross product for the direction the tank should be facing with the result of cross(leftWheel, rightWheel); |
34,694 | As a general rule, I learnt that when stringing together multiple nouns to form a noun phrase, the nouns acting as adjectives lose their ending "s", even if they carry a plural meaning.
For example:
* asset inventory (an inventory of many assets)
* sample collection (a collection of samples)
* system logs (multiple l... | 2014/10/02 | [
"https://ell.stackexchange.com/questions/34694",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/3990/"
] | Only the context can be used to indicate this, together with local knowledge (for example it is far more likely, in my experience, that a "System Log" contains information about one system, not many). However using the prefix "specific" before any of these cases indicates that it is more likely to be singular.
For exa... | You are correct about the potential ambiguity. You can avoid it by rewording the sentence to use the relevant noun as a noun instead of an adjective. Like instead of saying, "The team has written a risk assessment" you could say, "The team has written an assessment of the risk", or "... of the risks", as the case may b... |
162 | While editing a song, I tried to cut out the bass drum by applying a high-pass FFT filter, i.e. filtering out the low pitch of the bass drum. This resulted in the drum sound being severely quieted, rather than removed entirely. I know that higher overtones from the drum would still be present in the audio, but why isn'... | 2010/12/09 | [
"https://avp.stackexchange.com/questions/162",
"https://avp.stackexchange.com",
"https://avp.stackexchange.com/users/123/"
] | First of all, tell us more about the filter. Is it really a brickwall filter, or are you actually using a low roll-off or low cut-off filter? In the latter case, it is perfectly normal, when using a high cut-off filter, the low frequencies decrease with -6dB per octave below the specified frequency, and are not complet... | In general a filter is not something that completely removes a given set of frequencies. Rather, it just attenuates them - cutting some percentage of them out. In extreme cases (kill EQs on DJ mixers come to mind) the attenuation is so much that it may as well be considered getting rid of it entirely.
Wikipedia has a ... |
29,582,698 | I'm trying to get the location of a photo via iOS 8's photo library.
The doc says that the PHAsset class has a 'location' attribute.
So I tried to view the 'location' via Xcode v6.3 attached to my iTouch running iOS 8.3... assessing my iTouch photo... | 2015/04/11 | [
"https://Stackoverflow.com/questions/29582698",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/715747/"
] | You should install Linux and prepare a Qt development environment on it.You can then copy your project there, compile it and see the results in the real environment. This way you can cope with the minor differences when porting from one OS to another easily.
So don't think of cross compiling your app for Linux on Wind... | Before you can deploy something you have to compile it for that platform, and here you have two main choiches: either you cross-compile which means you compile it on windows using a set of tools so that your software is built to run on a linux, or you get a linux machine, you copy your entire project over and let Qt fo... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Yes/no questions are bad interview questions. If you can give a great answer to a bad question, you are ahead of the game. Yes and No are both bad answers. A good answer explains why you think you are or are not, and probably has a story too. For example:
>
> Yes, I am a very hard worker when it's needed. For example... | It all depends if how the interview is going honestly. You don't want to talk too much, or talk too little. It also depends on how the interviewer is talking as well, do they go on and ramble when they are talking about the company, or are they short and percise?
Depending on your read of the interviewer, it should b... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Answer honestly. Some people ask to see *how* you sell yourself. Are you humble, or self-deprecating, or think you're the best thing since sliced bread? Some people ask to make sure you're skilled/self aware enough to [give accurate self-assessment](http://en.wikipedia.org/wiki/Dunning%E2%80%93Kruger_effect).
That, th... | Don't forget that an interview is basically a conversation to sell yourself to someone. So there is no harm in being self-confident. I think the response you gave that you're probably not the most objective judge is a pretty good introduction to the self-confident part of the answer.
Also, try to see if you can imagin... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Don't forget that an interview is basically a conversation to sell yourself to someone. So there is no harm in being self-confident. I think the response you gave that you're probably not the most objective judge is a pretty good introduction to the self-confident part of the answer.
Also, try to see if you can imagin... | When I ask these kinds of questions, my intention is to see whether the interviewee is capable of being honest and self critical about their abilities, not whether they can twist words in to making something bad sound like something good (e.g. anyone who answers "what are your weaknesses?" with strengths dressed up as ... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Answer honestly. Some people ask to see *how* you sell yourself. Are you humble, or self-deprecating, or think you're the best thing since sliced bread? Some people ask to make sure you're skilled/self aware enough to [give accurate self-assessment](http://en.wikipedia.org/wiki/Dunning%E2%80%93Kruger_effect).
That, th... | When I ask these kinds of questions, my intention is to see whether the interviewee is capable of being honest and self critical about their abilities, not whether they can twist words in to making something bad sound like something good (e.g. anyone who answers "what are your weaknesses?" with strengths dressed up as ... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Yes/no questions are bad interview questions. If you can give a great answer to a bad question, you are ahead of the game. Yes and No are both bad answers. A good answer explains why you think you are or are not, and probably has a story too. For example:
>
> Yes, I am a very hard worker when it's needed. For example... | The best way to answer a question like that is to provide some type of short narrative of a past situation.
If you're asked "*Do you consider yourself a hard worker?*" you can't just answer with "*Yes, very hard, ask my boss!*" You should provide a real example from your past work to illustrate that and then be ready ... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | One shouldn't be humble at an interview. It's your biggest chance to make a good impression. Be self-confident. If they ask you, for example, "Are you a hard worker", you could answer something like "I believe I am" and bring some example why you think so ("I've mastered a new technology in 2 weeks!"). As long as you'r... | It all depends if how the interview is going honestly. You don't want to talk too much, or talk too little. It also depends on how the interviewer is talking as well, do they go on and ramble when they are talking about the company, or are they short and percise?
Depending on your read of the interviewer, it should b... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Yes/no questions are bad interview questions. If you can give a great answer to a bad question, you are ahead of the game. Yes and No are both bad answers. A good answer explains why you think you are or are not, and probably has a story too. For example:
>
> Yes, I am a very hard worker when it's needed. For example... | Answer honestly. Some people ask to see *how* you sell yourself. Are you humble, or self-deprecating, or think you're the best thing since sliced bread? Some people ask to make sure you're skilled/self aware enough to [give accurate self-assessment](http://en.wikipedia.org/wiki/Dunning%E2%80%93Kruger_effect).
That, th... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Yes/no questions are bad interview questions. If you can give a great answer to a bad question, you are ahead of the game. Yes and No are both bad answers. A good answer explains why you think you are or are not, and probably has a story too. For example:
>
> Yes, I am a very hard worker when it's needed. For example... | When I ask these kinds of questions, my intention is to see whether the interviewee is capable of being honest and self critical about their abilities, not whether they can twist words in to making something bad sound like something good (e.g. anyone who answers "what are your weaknesses?" with strengths dressed up as ... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Yes/no questions are bad interview questions. If you can give a great answer to a bad question, you are ahead of the game. Yes and No are both bad answers. A good answer explains why you think you are or are not, and probably has a story too. For example:
>
> Yes, I am a very hard worker when it's needed. For example... | Don't forget that an interview is basically a conversation to sell yourself to someone. So there is no harm in being self-confident. I think the response you gave that you're probably not the most objective judge is a pretty good introduction to the self-confident part of the answer.
Also, try to see if you can imagin... |
3,793 | In every interview I have ever been in, I get asked questions such as these:
* Do you consider yourself a hard worker?
* How would you rate your expertise in [whatever area]?
* Do you think you're a fast learner?
Every time, I'm stumped about how to answer. Truthfully, I *am* a hard worker, I usually have a high degr... | 2012/09/07 | [
"https://workplace.stackexchange.com/questions/3793",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3077/"
] | Yes/no questions are bad interview questions. If you can give a great answer to a bad question, you are ahead of the game. Yes and No are both bad answers. A good answer explains why you think you are or are not, and probably has a story too. For example:
>
> Yes, I am a very hard worker when it's needed. For example... | One shouldn't be humble at an interview. It's your biggest chance to make a good impression. Be self-confident. If they ask you, for example, "Are you a hard worker", you could answer something like "I believe I am" and bring some example why you think so ("I've mastered a new technology in 2 weeks!"). As long as you'r... |
96,666 | I have a Canon EOS 1300D/T6. The screen keeps going black after I take two photos. To fix it, I have to take the battery out and put it back in. The battery is fully charged. How do I fix this please? | 2018/02/16 | [
"https://photo.stackexchange.com/questions/96666",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/72340/"
] | You "fix" it by taking the battery out and putting it back in.
Seriously, it does sound like a bug in your camera, but it could be caused by a faulty battery or resolved by changing settings related to how long the screen stays on after taking a shot. Or could it be that your camera starts sending the screen output t... | This is not a full answer, just something you can do.
See if you can get another battery from a friend or something. If it works well on your camera, good, it is the battery.
If the problem persists, take it to a service center.
Just a tip, see if the contacts look clean. |
96,666 | I have a Canon EOS 1300D/T6. The screen keeps going black after I take two photos. To fix it, I have to take the battery out and put it back in. The battery is fully charged. How do I fix this please? | 2018/02/16 | [
"https://photo.stackexchange.com/questions/96666",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/72340/"
] | You "fix" it by taking the battery out and putting it back in.
Seriously, it does sound like a bug in your camera, but it could be caused by a faulty battery or resolved by changing settings related to how long the screen stays on after taking a shot. Or could it be that your camera starts sending the screen output t... | The touch screen to take pictures is on i had same prob and turned that function off and now its back working fine |
96,666 | I have a Canon EOS 1300D/T6. The screen keeps going black after I take two photos. To fix it, I have to take the battery out and put it back in. The battery is fully charged. How do I fix this please? | 2018/02/16 | [
"https://photo.stackexchange.com/questions/96666",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/72340/"
] | The touch screen to take pictures is on i had same prob and turned that function off and now its back working fine | This is not a full answer, just something you can do.
See if you can get another battery from a friend or something. If it works well on your camera, good, it is the battery.
If the problem persists, take it to a service center.
Just a tip, see if the contacts look clean. |
1,785,571 | I'm noticing a strange thing with Alarms on Android - they don't always wake up the device at the correct intervals. For example, if I set an alarm to start a service every 5 minutes (using RTC\_WAKEUP, or similar), everything works fine until the device goes to sleep - after that, the alarm may not fire for minutes, o... | 2009/11/23 | [
"https://Stackoverflow.com/questions/1785571",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/132628/"
] | I've never programmed on Android but I was kinda bored so I googled around and found this, which seems to be very related: <http://groups.google.com/group/android-developers/browse_thread/thread/f0303a539de3a74a> (you'll need to sign in to your google account in order to read it)
>
> I had another look at the AlarmMa... | You should also look at:
<http://developer.android.com/reference/android/app/AlarmManager.html>
Also, when the device is asleep, your program has already had OnPause() called, so only services are running at that point. Meaning that unless your Broadcast Receiver is set to have a wake lock -- the way it suggests in th... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | Anyone who believes this problem to be solved, or is building a system and wants to work with the issue should read this: [Falsehoods Programmers Believe About Names](http://www.kalzumeus.com/2010/06/17/falsehoods-programmers-believe-about-names/)
Essentially you will have to decide based on what you are doing and the... | It may depend on the forms and systems in use at the particular institution you're working with. Taking my university as an example (U.S., large urban community college), our systems work fine with your full name, i.e., option #2. The class rosters I receive routinely have two names per field (i.e., have a space in the... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | I know a number of people who deal with similar situations, and the last name will never cease to given you bureaucratic headaches in English-speaking countries, because no matter what you do, other people will sometimes enter it incorrectly into databases in a variety of different and unusual failure modes.
Most majo... | It may depend on the forms and systems in use at the particular institution you're working with. Taking my university as an example (U.S., large urban community college), our systems work fine with your full name, i.e., option #2. The class rosters I receive routinely have two names per field (i.e., have a space in the... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | The solution that involves the least hassle in most cases is to fill out the form so that it matches your name on your identity documents (e.g. passport).
This avoids problems (annoyances, mainly) that can arise as a result of having "different" names in different systems. | As a Portuguese person with four names, living in the UK for a few years now, I’ve found that putting my first 2 names as First Names and my last 2 names as Last Names works virtually everywhere.
I got to this conclusion after having a British Airways staff person telling me the system couldn’t find my tickets automat... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | The solution that involves the least hassle in most cases is to fill out the form so that it matches your name on your identity documents (e.g. passport).
This avoids problems (annoyances, mainly) that can arise as a result of having "different" names in different systems. | I know a number of people who deal with similar situations, and the last name will never cease to given you bureaucratic headaches in English-speaking countries, because no matter what you do, other people will sometimes enter it incorrectly into databases in a variety of different and unusual failure modes.
Most majo... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | I would say it partly depends on how you want be known at the school where you are applying. Fill it out the first way, and you'll be known as Juan González at that school. That's how your name will likely be printed on class rosters, and that's what professors will see when you've registered for their class. If you'd ... | It may depend on the forms and systems in use at the particular institution you're working with. Taking my university as an example (U.S., large urban community college), our systems work fine with your full name, i.e., option #2. The class rosters I receive routinely have two names per field (i.e., have a space in the... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | I am in your exact same situation: Spanish name with 2+2. I have lived abroad for 6 years now, most of it in Ireland.
There is no way out of misunderstandings, I'm afraid, and your second last name will often be assumed to be your only family name.
Here is a recipe that has worked out for me so far:
* For a non lega... | Anyone who believes this problem to be solved, or is building a system and wants to work with the issue should read this: [Falsehoods Programmers Believe About Names](http://www.kalzumeus.com/2010/06/17/falsehoods-programmers-believe-about-names/)
Essentially you will have to decide based on what you are doing and the... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | The solution that involves the least hassle in most cases is to fill out the form so that it matches your name on your identity documents (e.g. passport).
This avoids problems (annoyances, mainly) that can arise as a result of having "different" names in different systems. | Anyone who believes this problem to be solved, or is building a system and wants to work with the issue should read this: [Falsehoods Programmers Believe About Names](http://www.kalzumeus.com/2010/06/17/falsehoods-programmers-believe-about-names/)
Essentially you will have to decide based on what you are doing and the... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | I am in your exact same situation: Spanish name with 2+2. I have lived abroad for 6 years now, most of it in Ireland.
There is no way out of misunderstandings, I'm afraid, and your second last name will often be assumed to be your only family name.
Here is a recipe that has worked out for me so far:
* For a non lega... | I'm pretty sure this will get voted down as "Not answering the question", but the truth is we can not tell you what's right.
What kind of form is it? Does it have a legal status (ie: passport, Driver's license, academic transcript); something someone will ask, "How do I know this is really you, because the names do n... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | The solution that involves the least hassle in most cases is to fill out the form so that it matches your name on your identity documents (e.g. passport).
This avoids problems (annoyances, mainly) that can arise as a result of having "different" names in different systems. | I'm pretty sure this will get voted down as "Not answering the question", but the truth is we can not tell you what's right.
What kind of form is it? Does it have a legal status (ie: passport, Driver's license, academic transcript); something someone will ask, "How do I know this is really you, because the names do n... |
36,659 | How should I fill this information if I have more than one given name and more than one last name?
For example, if my name is Juan Eduardo González Rodríguez. I have 2 given names: "Juan" and "Eduardo", and I have 2 last names (The first one of my father and the second one of my mother because that how it is done in M... | 2015/01/12 | [
"https://academia.stackexchange.com/questions/36659",
"https://academia.stackexchange.com",
"https://academia.stackexchange.com/users/27242/"
] | I would say it partly depends on how you want be known at the school where you are applying. Fill it out the first way, and you'll be known as Juan González at that school. That's how your name will likely be printed on class rosters, and that's what professors will see when you've registered for their class. If you'd ... | As a Portuguese person with four names, living in the UK for a few years now, I’ve found that putting my first 2 names as First Names and my last 2 names as Last Names works virtually everywhere.
I got to this conclusion after having a British Airways staff person telling me the system couldn’t find my tickets automat... |
1,519,250 | I have a notsocheap software here sitting on a really cheap usb stick and I don't really trust this stick especially because it's in every days use an many changing machines. The software on the stick is in two versions for OS X and for Win, the stick is formated in FAt32.
The software itself is "portable" and runs dir... | 2020/01/22 | [
"https://superuser.com/questions/1519250",
"https://superuser.com",
"https://superuser.com/users/667750/"
] | According to the *ThinkPad USB-C Dock User Guide*:
>
> **Maximum resolutions and refresh rates**
>
>
> To achieve better display experience, it is recommended that you
> connect one or two external monitors to the dock at a time.
>
>
> * DP output only: 3840 x 2160 pixels (30 Hz)
> * VGA output only: 1920 x 1200... | After being told by everyone this is not possible, I was able to accomplish 1920x1080 on all 3 screens by connecting 2 via the docking station and one via the video output (hdmi) on the laptop itself. Change power settings to do nothing when closing laptop lid, close the lid.. detect the displays and voila.
Give this ... |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | Restarting the Dock fixed it for me.
Open up Activity Monitor, locate the Dock process, and Quit the dock. | On your Mac, choose Apple menu > System Preferences, click Sound, then click Sound Effects.
Find the alert sound that is causing the issue. When you click on it, it will play the sound effect. In my case, every time I used the keyboard shortcut cmd-shift-p - even though it was a valid shortcut in some apps - it made t... |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | On your Mac, choose Apple menu > System Preferences, click Sound, then click Sound Effects.
Find the alert sound that is causing the issue. When you click on it, it will play the sound effect. In my case, every time I used the keyboard shortcut cmd-shift-p - even though it was a valid shortcut in some apps - it made t... | It appears that this sort of issue can easily be caused by a glitched application reacting to the input. It doesn't have to be foreground for this to occur. Most recent example happening to me was telegram's save dialog left in the background. It caused beeps to occur with use of the cmd key and use of the space bar in... |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | On your Mac, choose Apple menu > System Preferences, click Sound, then click Sound Effects.
Find the alert sound that is causing the issue. When you click on it, it will play the sound effect. In my case, every time I used the keyboard shortcut cmd-shift-p - even though it was a valid shortcut in some apps - it made t... | I have the same issue with FortiClient. I have to close it/restart it to get it to work.
Prior to my understanding that it was an issue with FortiClient, I used to restart my Mac every time. |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | Restarting the Dock fixed it for me.
Open up Activity Monitor, locate the Dock process, and Quit the dock. | It has just happened to me as well.
For me, it turned out that a specific app (VPN) has blocked the input from my keyboard. When I closed the app, the keyboard immediately returned to work properly (no reset was required).
Try to close apps that start-up with your Mac, perhaps one of them is taking control over your ... |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | It has just happened to me as well.
For me, it turned out that a specific app (VPN) has blocked the input from my keyboard. When I closed the app, the keyboard immediately returned to work properly (no reset was required).
Try to close apps that start-up with your Mac, perhaps one of them is taking control over your ... | It appears that this sort of issue can easily be caused by a glitched application reacting to the input. It doesn't have to be foreground for this to occur. Most recent example happening to me was telegram's save dialog left in the background. It caused beeps to occur with use of the cmd key and use of the space bar in... |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | It has just happened to me as well.
For me, it turned out that a specific app (VPN) has blocked the input from my keyboard. When I closed the app, the keyboard immediately returned to work properly (no reset was required).
Try to close apps that start-up with your Mac, perhaps one of them is taking control over your ... | I have the same issue with FortiClient. I have to close it/restart it to get it to work.
Prior to my understanding that it was an issue with FortiClient, I used to restart my Mac every time. |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | Restarting the Dock fixed it for me.
Open up Activity Monitor, locate the Dock process, and Quit the dock. | It appears that this sort of issue can easily be caused by a glitched application reacting to the input. It doesn't have to be foreground for this to occur. Most recent example happening to me was telegram's save dialog left in the background. It caused beeps to occur with use of the cmd key and use of the space bar in... |
384,025 | When using any keyboard shortcut in any application, there is a beeping sound effect that is normally played when there is an error. However, the keyboard shortcut still works normally. I am using macOS Mojave 10.14.6. | 2020/03/10 | [
"https://apple.stackexchange.com/questions/384025",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/359290/"
] | Restarting the Dock fixed it for me.
Open up Activity Monitor, locate the Dock process, and Quit the dock. | I have the same issue with FortiClient. I have to close it/restart it to get it to work.
Prior to my understanding that it was an issue with FortiClient, I used to restart my Mac every time. |
19,707 | There is the popular question “What is the gravity at the center of the Earth?”. And the answer is zero, because the forces cancel out. And then the gravity increases linearly as you move to the surface. Would the same be true for a rotating cylinder?
I mean, if, for example, I have a cylinder with a radius 270 of met... | 2017/01/07 | [
"https://space.stackexchange.com/questions/19707",
"https://space.stackexchange.com",
"https://space.stackexchange.com/users/18149/"
] | Yes and no.
As long as you're on a solid surface: yes. 'Gravity' (centripetal force, really) decreases proportionally with distance to the center.
But if the cylinder has a vacuum inside (so no air mass that rotates with the cylinder), you'd be weightless as soon as you left the surface. If you were to cancel out yo... | Consider a huge, capped drum floating in space, rotating on its axis of radial symmetry. If you are free-floating inside it, no matter where you are, you experience no forces/accelerations due to the drum's rotation, because you are not moving with it.
Now, lets add a ladder attached to the inside of one of its end ca... |
349 | I eventually figured out that I could use a code sniffer in Sublime Text, load up a [CodeIgniter rule set](https://github.com/thomas-ernest/CodeIgniter-for-PHP_CodeSniffer) (not a Craft project, obviously), and see in real time where my formatting, spacing and naming conventions could be improved for consistency.
Is t... | 2014/06/20 | [
"https://craftcms.stackexchange.com/questions/349",
"https://craftcms.stackexchange.com",
"https://craftcms.stackexchange.com/users/22/"
] | I would strongly suggest that you follow PSR-2 since that is what most of the craft source code adheres to and it is a pretty good standard for general PHP development. Just be aware that craft itself won't pass PSR-2 linting because there are places where it deviates from the standard, two of which are namespacing (cr... | I don't know about any Craft specific-guide, but there are is a guide and code-sniffer for Yii 1:
* [Core framework code style](https://github.com/yiisoft/yii/wiki/Core-framework-code-style)
* [Yii Framework PHP CodeSniffer Coding Standard](https://github.com/Ardem/yii-coding-standard) |
349 | I eventually figured out that I could use a code sniffer in Sublime Text, load up a [CodeIgniter rule set](https://github.com/thomas-ernest/CodeIgniter-for-PHP_CodeSniffer) (not a Craft project, obviously), and see in real time where my formatting, spacing and naming conventions could be improved for consistency.
Is t... | 2014/06/20 | [
"https://craftcms.stackexchange.com/questions/349",
"https://craftcms.stackexchange.com",
"https://craftcms.stackexchange.com/users/22/"
] | We plan on adding official "Craft Plugin Code Guidelines" recommendations once the plugin store is out of the gate.
In the meantime, Selvin is correct. We aren't 100% PSR-2 compliant, but it's easy enough to look in the craft/app folder and see what our coding style is.
The Yii 1.0 coding style is, IMO, quite awful, ... | I don't know about any Craft specific-guide, but there are is a guide and code-sniffer for Yii 1:
* [Core framework code style](https://github.com/yiisoft/yii/wiki/Core-framework-code-style)
* [Yii Framework PHP CodeSniffer Coding Standard](https://github.com/Ardem/yii-coding-standard) |
349 | I eventually figured out that I could use a code sniffer in Sublime Text, load up a [CodeIgniter rule set](https://github.com/thomas-ernest/CodeIgniter-for-PHP_CodeSniffer) (not a Craft project, obviously), and see in real time where my formatting, spacing and naming conventions could be improved for consistency.
Is t... | 2014/06/20 | [
"https://craftcms.stackexchange.com/questions/349",
"https://craftcms.stackexchange.com",
"https://craftcms.stackexchange.com/users/22/"
] | I would strongly suggest that you follow PSR-2 since that is what most of the craft source code adheres to and it is a pretty good standard for general PHP development. Just be aware that craft itself won't pass PSR-2 linting because there are places where it deviates from the standard, two of which are namespacing (cr... | Another option: Use <http://editorconfig.org/>
If you're using Sublime Text, you can use <https://github.com/sindresorhus/editorconfig-sublime> to enforce those rules. |
349 | I eventually figured out that I could use a code sniffer in Sublime Text, load up a [CodeIgniter rule set](https://github.com/thomas-ernest/CodeIgniter-for-PHP_CodeSniffer) (not a Craft project, obviously), and see in real time where my formatting, spacing and naming conventions could be improved for consistency.
Is t... | 2014/06/20 | [
"https://craftcms.stackexchange.com/questions/349",
"https://craftcms.stackexchange.com",
"https://craftcms.stackexchange.com/users/22/"
] | We plan on adding official "Craft Plugin Code Guidelines" recommendations once the plugin store is out of the gate.
In the meantime, Selvin is correct. We aren't 100% PSR-2 compliant, but it's easy enough to look in the craft/app folder and see what our coding style is.
The Yii 1.0 coding style is, IMO, quite awful, ... | Another option: Use <http://editorconfig.org/>
If you're using Sublime Text, you can use <https://github.com/sindresorhus/editorconfig-sublime> to enforce those rules. |
349 | I eventually figured out that I could use a code sniffer in Sublime Text, load up a [CodeIgniter rule set](https://github.com/thomas-ernest/CodeIgniter-for-PHP_CodeSniffer) (not a Craft project, obviously), and see in real time where my formatting, spacing and naming conventions could be improved for consistency.
Is t... | 2014/06/20 | [
"https://craftcms.stackexchange.com/questions/349",
"https://craftcms.stackexchange.com",
"https://craftcms.stackexchange.com/users/22/"
] | I would strongly suggest that you follow PSR-2 since that is what most of the craft source code adheres to and it is a pretty good standard for general PHP development. Just be aware that craft itself won't pass PSR-2 linting because there are places where it deviates from the standard, two of which are namespacing (cr... | We plan on adding official "Craft Plugin Code Guidelines" recommendations once the plugin store is out of the gate.
In the meantime, Selvin is correct. We aren't 100% PSR-2 compliant, but it's easy enough to look in the craft/app folder and see what our coding style is.
The Yii 1.0 coding style is, IMO, quite awful, ... |
52,169 | Today my wife witnessed 3 fighter jets taking off from Teterboro Airport in NJ. She even took a video. How common is it for military jets to use civilian airports? | 2018/06/01 | [
"https://aviation.stackexchange.com/questions/52169",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/9847/"
] | Fighter jets may fly into local fields for airshows, to re-fuel or for needed maintenance in route etc.
What your wife may have seen may have [been related to the VIP TFR's](https://www.aopa.org/go-fly/tfrs) that usually pop up in the summer due to the president (or first family) heading back to their home on weekend... | There are many, many Air National Guard Bases at Regional and Municipal airports. The ANGB planes typically have their own ramp area and hangars for repair, and have security systems around them.
Wikipedia has a list of [ANGB locations](https://en.wikipedia.org/wiki/List_of_United_States_Air_National_Guard_Squadrons)... |
52,169 | Today my wife witnessed 3 fighter jets taking off from Teterboro Airport in NJ. She even took a video. How common is it for military jets to use civilian airports? | 2018/06/01 | [
"https://aviation.stackexchange.com/questions/52169",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/9847/"
] | Fighter jets may fly into local fields for airshows, to re-fuel or for needed maintenance in route etc.
What your wife may have seen may have [been related to the VIP TFR's](https://www.aopa.org/go-fly/tfrs) that usually pop up in the summer due to the president (or first family) heading back to their home on weekend... | Night and day, seven days per week at KABI. This full time-use of a regional airport began early 2018.
Remember the song, "Abilene - Abilene... prettiest town I've ever seen..." They should make a new song, "Loudest town I've ever seen..." |
52,169 | Today my wife witnessed 3 fighter jets taking off from Teterboro Airport in NJ. She even took a video. How common is it for military jets to use civilian airports? | 2018/06/01 | [
"https://aviation.stackexchange.com/questions/52169",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/9847/"
] | Some airports are shared with the military. For example, Portland International in Oregon has the Portland Air National Guard Base, and Charleston International is shared with Joint Base Charleston. Airports such as these will have frequent military traffic.
Even airports with no permanent military presence may see oc... | There are many, many Air National Guard Bases at Regional and Municipal airports. The ANGB planes typically have their own ramp area and hangars for repair, and have security systems around them.
Wikipedia has a list of [ANGB locations](https://en.wikipedia.org/wiki/List_of_United_States_Air_National_Guard_Squadrons)... |
52,169 | Today my wife witnessed 3 fighter jets taking off from Teterboro Airport in NJ. She even took a video. How common is it for military jets to use civilian airports? | 2018/06/01 | [
"https://aviation.stackexchange.com/questions/52169",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/9847/"
] | Some airports are shared with the military. For example, Portland International in Oregon has the Portland Air National Guard Base, and Charleston International is shared with Joint Base Charleston. Airports such as these will have frequent military traffic.
Even airports with no permanent military presence may see oc... | Night and day, seven days per week at KABI. This full time-use of a regional airport began early 2018.
Remember the song, "Abilene - Abilene... prettiest town I've ever seen..." They should make a new song, "Loudest town I've ever seen..." |
52,169 | Today my wife witnessed 3 fighter jets taking off from Teterboro Airport in NJ. She even took a video. How common is it for military jets to use civilian airports? | 2018/06/01 | [
"https://aviation.stackexchange.com/questions/52169",
"https://aviation.stackexchange.com",
"https://aviation.stackexchange.com/users/9847/"
] | There are many, many Air National Guard Bases at Regional and Municipal airports. The ANGB planes typically have their own ramp area and hangars for repair, and have security systems around them.
Wikipedia has a list of [ANGB locations](https://en.wikipedia.org/wiki/List_of_United_States_Air_National_Guard_Squadrons)... | Night and day, seven days per week at KABI. This full time-use of a regional airport began early 2018.
Remember the song, "Abilene - Abilene... prettiest town I've ever seen..." They should make a new song, "Loudest town I've ever seen..." |
103,024 | While I'm satisfied (despite the fringe) with shoots from a partially visible moon with a cheap 500 mm lens:
[](https://i.stack.imgur.com/5T2oL.png)
1/100 ISO 100 f/?
I cannot understand why the image quality is extremely diminished when doing the s... | 2018/11/22 | [
"https://photo.stackexchange.com/questions/103024",
"https://photo.stackexchange.com",
"https://photo.stackexchange.com/users/76026/"
] | >
> What makes the difference on partially and fully visible moon?
>
>
>
In a word: **shadows**.
>
> I cannot understand why the IQ is extremely diminished when doing the same with an almost fully visible moon.
>
>
>
The second image does appear to suffer from lower sharpness and overall quality. However, ev... | The full moon is illuminated by the sun which is directly overhead, i.e. noon. Mountains on the moon's surface, at noon local time, cast no shadows. When the moon appears to be partially illuminated, gibbous, 1st.or last quarter, 1/2 moon, crescent etc. This local time is such that the sun casts shadows. A view of the ... |
400,150 | I'm having by time to time problems with my **OS** running really slow because the **System** uses a lot of CPU (it stays like this ~30min). I've checked different articles on the internet in regard to this issue and none of them worked for me. I also tried to update from Mojave to Catalina in the idea that this might ... | 2020/08/27 | [
"https://apple.stackexchange.com/questions/400150",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/350833/"
] | What you're seeing is not "the system" (as a separate entity) using up your CPU time so that "your programs" are not getting their fair share. This is not what happens.
In order to interpret the screenshot, you'll need to know that modern computers are designed to have their work load split between what is known as "u... | Chrome is gobbling up your CPU, look how many processes it is running. Chrome is known to be a CPU intensive browser because it runs every tab and every extension as a standalone process. It increases app’s stability but makes your computer rather slow.
Uninstall all but essential two or three extensions, and try not ... |
384,685 | I'm looking for a a more powerful but still succinct phrase to replace 'brings clarity to'. It is being used in the context of "... brings clarity to this new cutting edge of positive psychology." | 2017/04/16 | [
"https://english.stackexchange.com/questions/384685",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/231542/"
] | I would just replace 'brings clarity to' with 'clarifies' because I think less is more. Alternatively, we could go with 'delineates' or 'clearly delineates' or 'demystifies' or 'aptly demystifies' or 'efficaciously delineates' or 'efficaciously demystifies' or 'delineates with efficacy'. | The word **elucidates** exists for exactly this purpose.
>
> to make lucid especially by explanation or analysis
>
>
>
<https://www.merriam-webster.com/dictionary/elucidates> |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | That is a very logical question. It is quite common for folks who are good at writing lyrics to partner with other folks who are good at creating melodies! Some folks strengths may lie in different areas and pooling those relative strengths can lead to much greater results than either partner working alone might hope t... | *Disclaimer*: this answer does not address the legal issues involved in songwriting/composing/preforming credits in terms of copyright. It only addresses the common language aspects of the question.
* If you literally just provided the words -- you'd be the "lyricist".
* If you also constructed the melody that goes wi... |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | *Disclaimer*: this answer does not address the legal issues involved in songwriting/composing/preforming credits in terms of copyright. It only addresses the common language aspects of the question.
* If you literally just provided the words -- you'd be the "lyricist".
* If you also constructed the melody that goes wi... | I see some very very long answers above me. But the answer to your question: "What am i?"
You are lyricist / co-songwriter. |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | *Disclaimer*: this answer does not address the legal issues involved in songwriting/composing/preforming credits in terms of copyright. It only addresses the common language aspects of the question.
* If you literally just provided the words -- you'd be the "lyricist".
* If you also constructed the melody that goes wi... | Oh lyricist/songwriter is not something that can be given to a broad spectrum of artists some like NF, he is a Lyricist and songwriter but then there's others that are just lyricist poetic writers. It becomes a rap when there's an audible accompanying The Lyricist writings that's why people beatbox prior to starting th... |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | That is a very logical question. It is quite common for folks who are good at writing lyrics to partner with other folks who are good at creating melodies! Some folks strengths may lie in different areas and pooling those relative strengths can lead to much greater results than either partner working alone might hope t... | In hip-hop and contemporary pop that is based on tracks and beats, the person who creates the beats, by which I mean the person who composes the rhythms and sounds, physically samples the samples, programs the drum machine, plays the instruments, and records and mixes the performances, is called the **DJ** or the **pro... |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | That is a very logical question. It is quite common for folks who are good at writing lyrics to partner with other folks who are good at creating melodies! Some folks strengths may lie in different areas and pooling those relative strengths can lead to much greater results than either partner working alone might hope t... | I see some very very long answers above me. But the answer to your question: "What am i?"
You are lyricist / co-songwriter. |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | That is a very logical question. It is quite common for folks who are good at writing lyrics to partner with other folks who are good at creating melodies! Some folks strengths may lie in different areas and pooling those relative strengths can lead to much greater results than either partner working alone might hope t... | Oh lyricist/songwriter is not something that can be given to a broad spectrum of artists some like NF, he is a Lyricist and songwriter but then there's others that are just lyricist poetic writers. It becomes a rap when there's an audible accompanying The Lyricist writings that's why people beatbox prior to starting th... |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | In hip-hop and contemporary pop that is based on tracks and beats, the person who creates the beats, by which I mean the person who composes the rhythms and sounds, physically samples the samples, programs the drum machine, plays the instruments, and records and mixes the performances, is called the **DJ** or the **pro... | I see some very very long answers above me. But the answer to your question: "What am i?"
You are lyricist / co-songwriter. |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | In hip-hop and contemporary pop that is based on tracks and beats, the person who creates the beats, by which I mean the person who composes the rhythms and sounds, physically samples the samples, programs the drum machine, plays the instruments, and records and mixes the performances, is called the **DJ** or the **pro... | Oh lyricist/songwriter is not something that can be given to a broad spectrum of artists some like NF, he is a Lyricist and songwriter but then there's others that are just lyricist poetic writers. It becomes a rap when there's an audible accompanying The Lyricist writings that's why people beatbox prior to starting th... |
41,422 | In a songwriting session, if I'm the one who came out with the lyrics and the beat of the song but didn't make the musical instrumental (can't play any musical instrument). What am I? | 2016/01/28 | [
"https://music.stackexchange.com/questions/41422",
"https://music.stackexchange.com",
"https://music.stackexchange.com/users/26179/"
] | I see some very very long answers above me. But the answer to your question: "What am i?"
You are lyricist / co-songwriter. | Oh lyricist/songwriter is not something that can be given to a broad spectrum of artists some like NF, he is a Lyricist and songwriter but then there's others that are just lyricist poetic writers. It becomes a rap when there's an audible accompanying The Lyricist writings that's why people beatbox prior to starting th... |
13,538,365 | We signed up for the windows azure 90-day free trial and created 4 websites, 2 virtual servers and 2 SQL databases. They've been running for about a month now and have been doing great.
Tonight, I got a call from a user that none of them are up. So I went to the dashboard to find:
![azure websites trial limited statu... | 2012/11/24 | [
"https://Stackoverflow.com/questions/13538365",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/300408/"
] | I have the same issue. NO documentation anywhere, but I found this. Hopefully this is the cause. I am in West US as well:
<https://www.windowsazure.com/en-us/support/service-dashboard/> | Several people seem to be [asking](https://stackoverflow.com/questions/13538361/why-does-my-azure-website-status-become-limited) this question right now. Might be an outage. |
5,564,510 | When i run my project its give me below error.
Compile Error: Error generating final archive: java.io.FileNotFoundException: ..\bin\resources.ap\_ does not exist.
I tried to clean my project but also it can not generate the resource.ap\_ file and my apk file size is 0..
please help me to solve this problem... | 2011/04/06 | [
"https://Stackoverflow.com/questions/5564510",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/614807/"
] | Quite often problems like this can be solved by deleting the project from your eclipse workspace (NOT deleting the project files) then importing the project back into the workspace. Give it a try... | Usually the following steps work:
ADT -> Project -> Clean |
1,953,575 | Does anyone know the answer to this question? | 2009/12/23 | [
"https://Stackoverflow.com/questions/1953575",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/236924/"
] | Yes. To search a hash map with 100 million items added to it, you do this:
1) Calculate the hash of the object you're looking for.
2) Find that bucket
3) Search through that bucket for the item.
(1) is independent of the size of the hash map or number of items in it.
(2) is O(1), assuming a standard hashmap ... | Yes, still constant time (amortized). |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | I couldn't imagine this ever being a good idea. The current mess I've inherited writes vital billing information to CSV and updates it after projects are complete. It runs horribly and thousands of dollars are missed a month. For the current restrictions that you have, I'd consider finding better hosting. | If I understand you correctly: you need to access the same database from both python and php, and you're screwed because you can only use mysql from php, and only sqlite from python?
Could you further explain this? Maybe you could use xml-rpc or plain http requests with xml/json/... to get the php program to communica... |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | Keep calling on the help desk.
While you can use a CSV as a database, it's generally a bad idea. You would have to implement you own locking, searching, updating, and be very careful with how you write it out to make sure that it isn't erased in case of a power outage or other abnormal shutdown. There will be no trans... | I'd keep calling help desk. You **don't** want to use CSV for data if it's relational at all. It's going to be nightmare. |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | Take a look at this: <http://www.netpromi.com/kirbybase_python.html> | Disagreeing with the noble colleagues, I often use DBD::CSV from Perl. There are good reasons to do it. Foremost is data update made simple using a spreadsheet. As a bonus, since I am using SQL queries, the application can be easily upgraded to a real database engine. Bear in mind these were extremely small database in... |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | **Don't walk, run to get a new host immediately**. If your host won't even get you the most basic of free databases, it's time for a change. There are many fish in the sea.
At the very least I'd recommend an xml data store rather than a csv. [My blog](http://chrisballance.com) uses an xml data provider and I haven't h... | I agree. Tell them that 5 random strangers agree that you being forced into a corner to use CSV is absurd and unacceptable. |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | **"Anyways, now, the question: is it possible to update values SQL-style in a CSV database?"**
Technically, it's possible. However, it can be hard.
If both PHP and Python are writing the file, you'll need to use OS-level locking to assure that they don't overwrite each other. Each part of your system will have to loc... | I'd keep calling help desk. You **don't** want to use CSV for data if it's relational at all. It's going to be nightmare. |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | **"Anyways, now, the question: is it possible to update values SQL-style in a CSV database?"**
Technically, it's possible. However, it can be hard.
If both PHP and Python are writing the file, you'll need to use OS-level locking to assure that they don't overwrite each other. Each part of your system will have to loc... | Disagreeing with the noble colleagues, I often use DBD::CSV from Perl. There are good reasons to do it. Foremost is data update made simple using a spreadsheet. As a bonus, since I am using SQL queries, the application can be easily upgraded to a real database engine. Bear in mind these were extremely small database in... |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | I couldn't imagine this ever being a good idea. The current mess I've inherited writes vital billing information to CSV and updates it after projects are complete. It runs horribly and thousands of dollars are missed a month. For the current restrictions that you have, I'd consider finding better hosting. | What about postgresql? I've found that quite nice to work with, and python supports it well.
But I really would look for another provider unless it's really not an option. |
712,519 | I have a list of div with the same class name. I wonder how to catch exactly which div client click on it by using jquery. I try many way in many times but I couldn''t figure out. Please help me because I''m newbie in jquery. | 2009/04/03 | [
"https://Stackoverflow.com/questions/712519",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/86053/"
] | **Don't walk, run to get a new host immediately**. If your host won't even get you the most basic of free databases, it's time for a change. There are many fish in the sea.
At the very least I'd recommend an xml data store rather than a csv. [My blog](http://chrisballance.com) uses an xml data provider and I haven't h... | Take a look at this: <http://www.netpromi.com/kirbybase_python.html> |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.