qid int64 1 74.7M | question stringlengths 12 33.8k | date stringlengths 10 10 | metadata list | response_j stringlengths 0 115k | response_k stringlengths 2 98.3k |
|---|---|---|---|---|---|
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | Telephone cable for RJ11 connections is simple round cable with some twist to the wires (but not in pairs). You can extend by 10 meters without any significant degradation. The signal from the ISP is meant to travel over that kind of cable. Use good quality (Belden or like) cable. Cheap cable may be inferior constructi... | The best thing you can do is home run a CAT-5E solid conductor cable back to the DMARC. (Outside box where the PSTN copper line comes in.) You can put one DSL filter here in parallel with the CAT-5E for the rest of the RJ-11 voice outlets instead of putting one on each phone outlet.
Why you don't want to use old house... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | Telephone cable for RJ11 connections is simple round cable with some twist to the wires (but not in pairs). You can extend by 10 meters without any significant degradation. The signal from the ISP is meant to travel over that kind of cable. Use good quality (Belden or like) cable. Cheap cable may be inferior constructi... | Due to voltage drops you want your line to the green box as short as possible.
Put your router as close to your first socket as possible for fastest internet speeds. (Shortest cable length)
Most older /standard gear only supports 100mbs. (you'll only get 95ish... Voltage drops)
Consider your router a repeater... It... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | Telephone cable for RJ11 connections is simple round cable with some twist to the wires (but not in pairs). You can extend by 10 meters without any significant degradation. The signal from the ISP is meant to travel over that kind of cable. Use good quality (Belden or like) cable. Cheap cable may be inferior constructi... | I learnt alot from all the answers and comments back then when asking this question - yet in general, most of the answers and comments summed up to "it is not something anyone can guarantee for 100%", and overall it is something that I'll know only when I try.
I nearly forgot about this question, **but I can say that ... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | The best thing you can do is home run a CAT-5E solid conductor cable back to the DMARC. (Outside box where the PSTN copper line comes in.) You can put one DSL filter here in parallel with the CAT-5E for the rest of the RJ-11 voice outlets instead of putting one on each phone outlet.
Why you don't want to use old house... | It could matter if you are already right at the distance limit for DSL. There's only so far that a DSL signal can travel from the phone company "Central Office" (or any signal amplifier they may have) and if you are outside the range it will start dropping a lot of packets due to signaling errors.
That said, it's not ... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | It could matter if you are already right at the distance limit for DSL. There's only so far that a DSL signal can travel from the phone company "Central Office" (or any signal amplifier they may have) and if you are outside the range it will start dropping a lot of packets due to signaling errors.
That said, it's not ... | Due to voltage drops you want your line to the green box as short as possible.
Put your router as close to your first socket as possible for fastest internet speeds. (Shortest cable length)
Most older /standard gear only supports 100mbs. (you'll only get 95ish... Voltage drops)
Consider your router a repeater... It... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | It could matter if you are already right at the distance limit for DSL. There's only so far that a DSL signal can travel from the phone company "Central Office" (or any signal amplifier they may have) and if you are outside the range it will start dropping a lot of packets due to signaling errors.
That said, it's not ... | I learnt alot from all the answers and comments back then when asking this question - yet in general, most of the answers and comments summed up to "it is not something anyone can guarantee for 100%", and overall it is something that I'll know only when I try.
I nearly forgot about this question, **but I can say that ... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | The best thing you can do is home run a CAT-5E solid conductor cable back to the DMARC. (Outside box where the PSTN copper line comes in.) You can put one DSL filter here in parallel with the CAT-5E for the rest of the RJ-11 voice outlets instead of putting one on each phone outlet.
Why you don't want to use old house... | Due to voltage drops you want your line to the green box as short as possible.
Put your router as close to your first socket as possible for fastest internet speeds. (Shortest cable length)
Most older /standard gear only supports 100mbs. (you'll only get 95ish... Voltage drops)
Consider your router a repeater... It... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | The best thing you can do is home run a CAT-5E solid conductor cable back to the DMARC. (Outside box where the PSTN copper line comes in.) You can put one DSL filter here in parallel with the CAT-5E for the rest of the RJ-11 voice outlets instead of putting one on each phone outlet.
Why you don't want to use old house... | I learnt alot from all the answers and comments back then when asking this question - yet in general, most of the answers and comments summed up to "it is not something anyone can guarantee for 100%", and overall it is something that I'll know only when I try.
I nearly forgot about this question, **but I can say that ... |
1,558,637 | I have a VDSL home network that consists of a tp-link modem-router (Archer VR400), connected to a splitter (filter) by a 1 meter RJ11 cable.
My current speed by Ethernet connection is 90-95/100 Mbps, so it seems my infrastructure is pretty reliable.
My question is: will extending the length of the RJ11 to a 10m cable... | 2020/06/07 | [
"https://superuser.com/questions/1558637",
"https://superuser.com",
"https://superuser.com/users/1185051/"
] | I learnt alot from all the answers and comments back then when asking this question - yet in general, most of the answers and comments summed up to "it is not something anyone can guarantee for 100%", and overall it is something that I'll know only when I try.
I nearly forgot about this question, **but I can say that ... | Due to voltage drops you want your line to the green box as short as possible.
Put your router as close to your first socket as possible for fastest internet speeds. (Shortest cable length)
Most older /standard gear only supports 100mbs. (you'll only get 95ish... Voltage drops)
Consider your router a repeater... It... |
798,868 | I use Office 365 for email with about 30 people using 6 domains.
I occasionally receive messages from the "Postmaster" saying that an email was rejected which was never sent. For instance:
[](https://i.stack.imgur.com/z7p9B.png)
I assumed that one o... | 2016/08/24 | [
"https://serverfault.com/questions/798868",
"https://serverfault.com",
"https://serverfault.com/users/119675/"
] | auth is the default SysLogFacility for sshd (openssh).
The authors choose to log attemts althouh prohibited. This is along normal logging behviour: If something does NOT work, log it.
As there is no specific log switch for failed root logins within sshd you have tp tune that on syslog level.
Configure syslog in the ... | Attempts to log in as root on your server are an indication of an intrusion attempt. The defaults are set up in line with information security best practice, so that admins are aware when someone is trying to access their servers as root.
Ignoring failed root logons runs counter to best practice. If you do not want t... |
339,327 | I bought my HP Color Laserjet CM1015 MFP about 5 years ago. It worked flawlessly on Windows Vista (unsure of 32/64-bit). This worked well on Windows 7 64-bit on two different machines (I upgraded to a new machine about six months ago). Just about two months ago it started to have problems with not being discoverable al... | 2011/09/24 | [
"https://superuser.com/questions/339327",
"https://superuser.com",
"https://superuser.com/users/99009/"
] | HP has Windows 7 64 bit drivers posted. [HP US CM1015](http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1846081&prodTypeId=18972&prodSeriesId=1846080&swLang=8&taskId=135&swEnvOID=4063) That may help with printing. The app that manages scanning may need to come from the origina... | >
> Worse yet, I lost the ability to print in color
>
>
>
Loading the postscript driver version yields color on the CM1015. |
339,327 | I bought my HP Color Laserjet CM1015 MFP about 5 years ago. It worked flawlessly on Windows Vista (unsure of 32/64-bit). This worked well on Windows 7 64-bit on two different machines (I upgraded to a new machine about six months ago). Just about two months ago it started to have problems with not being discoverable al... | 2011/09/24 | [
"https://superuser.com/questions/339327",
"https://superuser.com",
"https://superuser.com/users/99009/"
] | HP have not done a good job at making their vista driver installer work well in Windows 7/8.
But the actual drivers work fine. Install them as follows.
* Download and unzip the [400MB full software](http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=1846081&spf_p.tpst=psiSwdMain&spf... | HP has Windows 7 64 bit drivers posted. [HP US CM1015](http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1846081&prodTypeId=18972&prodSeriesId=1846080&swLang=8&taskId=135&swEnvOID=4063) That may help with printing. The app that manages scanning may need to come from the origina... |
339,327 | I bought my HP Color Laserjet CM1015 MFP about 5 years ago. It worked flawlessly on Windows Vista (unsure of 32/64-bit). This worked well on Windows 7 64-bit on two different machines (I upgraded to a new machine about six months ago). Just about two months ago it started to have problems with not being discoverable al... | 2011/09/24 | [
"https://superuser.com/questions/339327",
"https://superuser.com",
"https://superuser.com/users/99009/"
] | HP have not done a good job at making their vista driver installer work well in Windows 7/8.
But the actual drivers work fine. Install them as follows.
* Download and unzip the [400MB full software](http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=1846081&spf_p.tpst=psiSwdMain&spf... | >
> Worse yet, I lost the ability to print in color
>
>
>
Loading the postscript driver version yields color on the CM1015. |
22,990 | Are all of those words used? How does the meaning of the sentence change when either one is used instead of the others?
1.I was disappointed with/by my result.
2.I am disappointed with/by/in you/him/her. | 2014/05/08 | [
"https://ell.stackexchange.com/questions/22990",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/5852/"
] | Where the cause of disappointment is a *person*, we [normally use **in**](https://books.google.com/ngrams/graph?content=disappointed%20in%20you,disappointed%20with%20you,disappointed%20by%20you&year_start=1800&year_end=2000&corpus=15&smoothing=3&share=&direct_url=t1;,disappointed%20in%20you;,c0;.t1;,disappointed%20with... | Normal usage is as follows:
1. Disappointed with (object) - an object of neutral gender.
E.g: I am disappointed with your **service**.
2. Disappointed over - an incidence.
3. Disappointed in/with - very similar but slightly different connotation. 'In' is more personal and conveys reflection on the individual. 'With' ... |
22,990 | Are all of those words used? How does the meaning of the sentence change when either one is used instead of the others?
1.I was disappointed with/by my result.
2.I am disappointed with/by/in you/him/her. | 2014/05/08 | [
"https://ell.stackexchange.com/questions/22990",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/5852/"
] | The difference between "in", "by", and "with" in this context actually depends on the nature or type of disappointment you feel:
"Disappointed with" implies that the cause of the disappointment was something basic about the nature or attributes of the thing:
>
> I was disappointed with my new toaster. It really didn... | Normal usage is as follows:
1. Disappointed with (object) - an object of neutral gender.
E.g: I am disappointed with your **service**.
2. Disappointed over - an incidence.
3. Disappointed in/with - very similar but slightly different connotation. 'In' is more personal and conveys reflection on the individual. 'With' ... |
22,990 | Are all of those words used? How does the meaning of the sentence change when either one is used instead of the others?
1.I was disappointed with/by my result.
2.I am disappointed with/by/in you/him/her. | 2014/05/08 | [
"https://ell.stackexchange.com/questions/22990",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/5852/"
] | Normal usage is as follows:
1. Disappointed with (object) - an object of neutral gender.
E.g: I am disappointed with your **service**.
2. Disappointed over - an incidence.
3. Disappointed in/with - very similar but slightly different connotation. 'In' is more personal and conveys reflection on the individual. 'With' ... | Welp, it depends on regional usage. There isn't any difference between the usage of with or by ... Hence the above explanation is cancellenced referring to Comprehensive English grammar .. available online too. However I agree with other part elaborated above |
22,990 | Are all of those words used? How does the meaning of the sentence change when either one is used instead of the others?
1.I was disappointed with/by my result.
2.I am disappointed with/by/in you/him/her. | 2014/05/08 | [
"https://ell.stackexchange.com/questions/22990",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/5852/"
] | The difference between "in", "by", and "with" in this context actually depends on the nature or type of disappointment you feel:
"Disappointed with" implies that the cause of the disappointment was something basic about the nature or attributes of the thing:
>
> I was disappointed with my new toaster. It really didn... | Where the cause of disappointment is a *person*, we [normally use **in**](https://books.google.com/ngrams/graph?content=disappointed%20in%20you,disappointed%20with%20you,disappointed%20by%20you&year_start=1800&year_end=2000&corpus=15&smoothing=3&share=&direct_url=t1;,disappointed%20in%20you;,c0;.t1;,disappointed%20with... |
22,990 | Are all of those words used? How does the meaning of the sentence change when either one is used instead of the others?
1.I was disappointed with/by my result.
2.I am disappointed with/by/in you/him/her. | 2014/05/08 | [
"https://ell.stackexchange.com/questions/22990",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/5852/"
] | Where the cause of disappointment is a *person*, we [normally use **in**](https://books.google.com/ngrams/graph?content=disappointed%20in%20you,disappointed%20with%20you,disappointed%20by%20you&year_start=1800&year_end=2000&corpus=15&smoothing=3&share=&direct_url=t1;,disappointed%20in%20you;,c0;.t1;,disappointed%20with... | Welp, it depends on regional usage. There isn't any difference between the usage of with or by ... Hence the above explanation is cancellenced referring to Comprehensive English grammar .. available online too. However I agree with other part elaborated above |
22,990 | Are all of those words used? How does the meaning of the sentence change when either one is used instead of the others?
1.I was disappointed with/by my result.
2.I am disappointed with/by/in you/him/her. | 2014/05/08 | [
"https://ell.stackexchange.com/questions/22990",
"https://ell.stackexchange.com",
"https://ell.stackexchange.com/users/5852/"
] | The difference between "in", "by", and "with" in this context actually depends on the nature or type of disappointment you feel:
"Disappointed with" implies that the cause of the disappointment was something basic about the nature or attributes of the thing:
>
> I was disappointed with my new toaster. It really didn... | Welp, it depends on regional usage. There isn't any difference between the usage of with or by ... Hence the above explanation is cancellenced referring to Comprehensive English grammar .. available online too. However I agree with other part elaborated above |
6,454 | As I was just looking for a marshrutka in Ukraine in noticed the tag:
<https://travel.stackexchange.com/questions/tagged/marshrutkas>
It's a Russian word commonly used in all countries of the former Soviet Union with no equivalent in English. I would suggest to use the Russian plural (which is suitable for most Slavic... | 2020/01/25 | [
"https://travel.meta.stackexchange.com/questions/6454",
"https://travel.meta.stackexchange.com",
"https://travel.meta.stackexchange.com/users/105125/"
] | I think a better approach is possible here - using a proper English name instead. I've created the tag [shared-taxis](https://travel.stackexchange.com/questions/tagged/shared-taxis "show questions tagged 'shared-taxis'") and made tag [marshrutkas](https://travel.stackexchange.com/questions/tagged/marshrutkas "show ques... | As per [this comment](https://travel.meta.stackexchange.com/questions/6454/marshrutkas-tag-wrongly-written#comment15256_6455) I suggest creating the tag [kyrgyz-marshrutkas](https://travel.stackexchange.com/questions/tagged/kyrgyz-marshrutkas "show questions tagged 'kyrgyz-marshrutkas'") else I'd like to see all airlin... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | ~~Missing in previous answers is **[AndroidPIT](http://www.androidpit.com/)** which is running a separate market. Sure, almost all apps found there are also in the Playstore (but not necessarily vice-versa: so for missing apps there are links to the playstore provided). Developers need to actively maintain their apps o... | Though it's rather a "link only answer", in this case there's no way around as the given source is (hopefully) maintained and the content subject to change: Here's a [list of available markets](http://www.dmoz.org/Computers/Software/Operating_Systems/Android/Markets) in the [DMOZ](http://en.wikipedia.org/wiki/DMOZ) Moz... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | [The Samsung app store](https://www.samsung.com/us/apps/galaxy-store/) is installed on every Samsung mobile device (which is a lot). They are ultra helpful, unlike every other app store I have submitted to.
It can take over a week to get a new app past their quality control but it's worth the wait. They are so good at... | I received a very good amount of installs from [mobiletoones.com](https://www.mobiletoones.com/downloads/android-apps/) and [apps.opera.com (now android.oms.apps.bemobi.com)](http://android.oms.apps.bemobi.com/en_us/).
Also, my revenue was ramped up too within 2 days. If you are looking for targeted users for your app... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | I use [AppBrain](http://www.appbrain.com/) because it provides a nice site, and it makes it really easy to install apps onto my phone. Additionally, I'm finding that many bloggers that are reviewing apps are putting links to the AppBrain page for the app in their posts. This makes it really easy to mark something for i... | [Yalp Store](https://f-droid.org/en/packages/com.github.yeriomin.yalpstore/ "Yalp Store") allows the download of apps directly from Google Play Store.
>
> By default Yalp Store connects to Google services using a built-in account, so you do not have to own a Google account to use it . The only reason to use a live Go... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | There are actually several alternatives to the 'official' Google Android market (aka Play Store).
I personally like to search for new apps from my PC browser, and a bit less from my phone. Most (all?) of the markets nowadays offer both, via a dedicated phone-app that you'll have to install, except from the official on... | **[Aptoide](https://www.aptoide.com/)** serves a bunch of repositories in [APT](https://de.wikipedia.org/wiki/Advanced_Packaging_Tool) style (which some of you might know from [Debian](https://en.wikipedia.org/wiki/Debian) and its derivates). They also have their own Android client used to access (search and install ap... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | [Yalp Store](https://f-droid.org/en/packages/com.github.yeriomin.yalpstore/ "Yalp Store") allows the download of apps directly from Google Play Store.
>
> By default Yalp Store connects to Google services using a built-in account, so you do not have to own a Google account to use it . The only reason to use a live Go... | I received a very good amount of installs from [mobiletoones.com](https://www.mobiletoones.com/downloads/android-apps/) and [apps.opera.com (now android.oms.apps.bemobi.com)](http://android.oms.apps.bemobi.com/en_us/).
Also, my revenue was ramped up too within 2 days. If you are looking for targeted users for your app... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | There are actually several alternatives to the 'official' Google Android market (aka Play Store).
I personally like to search for new apps from my PC browser, and a bit less from my phone. Most (all?) of the markets nowadays offer both, via a dedicated phone-app that you'll have to install, except from the official on... | The [Amazon Appstore](https://www.amazon.com/gp/mas/get/amazonapp) (download link).
* [Web site](http://www.amazon.com/mobile-apps/b/?node=2350149011) (You can download apps from here to your device once its set up)
* [Advantages of the Amazon Appstore](https://android.stackexchange.com/q/7258/2422)
* [Uninstalling Ap... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | There are actually several alternatives to the 'official' Google Android market (aka Play Store).
I personally like to search for new apps from my PC browser, and a bit less from my phone. Most (all?) of the markets nowadays offer both, via a dedicated phone-app that you'll have to install, except from the official on... | [Yalp Store](https://f-droid.org/en/packages/com.github.yeriomin.yalpstore/ "Yalp Store") allows the download of apps directly from Google Play Store.
>
> By default Yalp Store connects to Google services using a built-in account, so you do not have to own a Google account to use it . The only reason to use a live Go... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | [SlideME](http://slideme.org/), this is very handy when you want to buy stuff in countries without paid Market. (actually you mention it in your question. I posted this answer just for the sake of completeness) | Now Google is focusing on the educational side, offering a special version of its app store called [Google Play for Education](http://www.google.com/edu/tablets/). (Initially applicable to USA only I believe).
It makes it easier for educators to find apps, books, videos, and other content appropriate for K-12 students... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | [SlideME](http://slideme.org/), this is very handy when you want to buy stuff in countries without paid Market. (actually you mention it in your question. I posted this answer just for the sake of completeness) | [**Aurora Store**](https://gitlab.com/AuroraOSS/AuroraStore) is an open source fork of [Yalp Store](https://f-droid.org/en/packages/com.github.yeriomin.yalpstore/) which provides a Material UI to the later.
>
> Aurora Store is an UnOfficial FOSS client to Google's Play Store, with an elegant design, using Aurora you ... |
216 | How many competing Android markets (other than the Play Store itself) are there and are they any good? Which ones do you use and why? | 2010/09/14 | [
"https://android.stackexchange.com/questions/216",
"https://android.stackexchange.com",
"https://android.stackexchange.com/users/119/"
] | I use [AppBrain](http://www.appbrain.com/) because it provides a nice site, and it makes it really easy to install apps onto my phone. Additionally, I'm finding that many bloggers that are reviewing apps are putting links to the AppBrain page for the app in their posts. This makes it really easy to mark something for i... | **[Aptoide](https://www.aptoide.com/)** serves a bunch of repositories in [APT](https://de.wikipedia.org/wiki/Advanced_Packaging_Tool) style (which some of you might know from [Debian](https://en.wikipedia.org/wiki/Debian) and its derivates). They also have their own Android client used to access (search and install ap... |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | Sharks of the Skies
-------------------
Maybe when they go raiding and pillaging, they go into bezerker mode, especially when they see a king and his noblemen, and he just gobbles them and anything around them up, like [sharks do](https://www.google.com/search?q=contents+of+sharks+stomachs&ie=UTF-8&oe=UTF-8&hl=en-us&c... | Dragons haven't always been dragons. Think about it, when in a movie have you seen an actual dragon take loot? They pillage and breathe fire and burn stuff. But where did the dragon come from? You never see two of them in one area, so there can't be a mommy dragon and a daddy dragon making a family of new dragons. No, ... |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | Only small dragons collect coins; large ones don't need to
----------------------------------------------------------
Dragons hoard gold for the same reason many birds collect shiny objects: to adorn their nests and attract mates. Unlike birds, though, dragons never stop growing, even after reaching maturity.
A young... | Most people don't know this but a dragon's mouth works like a [pelican's beak](http://animals.howstuffworks.com/birds/pelican-bill-vs-belly1.htm). It has a pouch which expands to hold things. |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | The same way that governments, kings, tyrants, and warlords gather their wealth: taxation. If the humans and other creatures in your domain don't bring you enough treasure, torch them. | Most dragons are known to swallow and regurgitate their loot. Many have magic to extradimensionally expand their gullets for just this purpose. |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | If you're a dragon, why are you gathering coins one at a time?
==============================================================
If I'm a dragon, the biggest baddest dude on Middle Earth or Faerun or wherever, I'm not going to pick-pocket people. I'm not robbing local barons, I'm going to knock over a king's palace and t... | What type of dragons are we talking about? A lot of myths and fantasy have dragons being able to assume a human shape. If that's not possible in this situation, then it's easy for them to force others to do their bidding. Most people would do whatever needed to be done to survive. |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | Dragons haven't always been dragons. Think about it, when in a movie have you seen an actual dragon take loot? They pillage and breathe fire and burn stuff. But where did the dragon come from? You never see two of them in one area, so there can't be a mommy dragon and a daddy dragon making a family of new dragons. No, ... | What type of dragons are we talking about? A lot of myths and fantasy have dragons being able to assume a human shape. If that's not possible in this situation, then it's easy for them to force others to do their bidding. Most people would do whatever needed to be done to survive. |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | On Kibota, the world of one of my novels, dragons work in close partnership with humans. When the industrial revolution hit that world, the dragons developed a fondness for trains. Kids love model trains, and to massive dragons, our full-sized trains are like toy train sets. Believe me, you want to have dragons patroll... | Not all the coins are coins; some are scales.
---------------------------------------------
Part of the reason dragons pick up coins to begin with is to make them look older, more established, more distinguished (very important for establishing prior claim if your dragons are territorial). But that's *why*, you wanted... |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | The same way that governments, kings, tyrants, and warlords gather their wealth: taxation. If the humans and other creatures in your domain don't bring you enough treasure, torch them. | Most people don't know this but a dragon's mouth works like a [pelican's beak](http://animals.howstuffworks.com/birds/pelican-bill-vs-belly1.htm). It has a pouch which expands to hold things. |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | **The gold is an illusion to lure in what the dragons *really* want:** *adventurers.* Dragons don't need gold or treasure. That's just silly. Where would they spend it? The local DracoMarttm? Nope. Gold has no value to a dragon. It's just another shiny rock.
**Dragons need food.** And lots of it. And flying around, s... | What type of dragons are we talking about? A lot of myths and fantasy have dragons being able to assume a human shape. If that's not possible in this situation, then it's easy for them to force others to do their bidding. Most people would do whatever needed to be done to survive. |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | Only small dragons collect coins; large ones don't need to
----------------------------------------------------------
Dragons hoard gold for the same reason many birds collect shiny objects: to adorn their nests and attract mates. Unlike birds, though, dragons never stop growing, even after reaching maturity.
A young... | Not all the coins are coins; some are scales.
---------------------------------------------
Part of the reason dragons pick up coins to begin with is to make them look older, more established, more distinguished (very important for establishing prior claim if your dragons are territorial). But that's *why*, you wanted... |
66,667 | If we accept that dragons are *big* and they hoard gold and gems (and don't make or mine these baubles, themselves), **how do dragons physically manipulate and transport human/elf/dwarf-sized coins and jewels back to their lairs?**
Even if we assume considerable dexterity of dragons' front paws (namely an opposable '... | 2017/01/03 | [
"https://worldbuilding.stackexchange.com/questions/66667",
"https://worldbuilding.stackexchange.com",
"https://worldbuilding.stackexchange.com/users/30166/"
] | The same way that governments, kings, tyrants, and warlords gather their wealth: taxation. If the humans and other creatures in your domain don't bring you enough treasure, torch them. | **The gold is an illusion to lure in what the dragons *really* want:** *adventurers.* Dragons don't need gold or treasure. That's just silly. Where would they spend it? The local DracoMarttm? Nope. Gold has no value to a dragon. It's just another shiny rock.
**Dragons need food.** And lots of it. And flying around, s... |
140,772 | When you have a singular noun as subject, a singular verb follows. However, the pronouns "I" and "you" are singular but singular verbs do not follow after them. Does anyone know something about this reason or historical explanations?
For example, you say "I live" instead of saying "I lives". | 2013/12/07 | [
"https://english.stackexchange.com/questions/140772",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/57039/"
] | As Mari-Lou has said in her comment, the first person singular of *be* is *am* in the present tense and *was* in the past tense. Neither is ever used as a plural in Standard English. The second person singular in the present tense is *are* and *were* in the past tense. Both are also used for all other numbers and perso... | Your question implies some *a priori* reason to expect nouns and verbs to "adhere to the same system" in the first place with regard to plural marking (or presumably, by extension, marking of other features). But it's not clear, looking across languages generally, that there's much pressure for languages to evolve in t... |
140,772 | When you have a singular noun as subject, a singular verb follows. However, the pronouns "I" and "you" are singular but singular verbs do not follow after them. Does anyone know something about this reason or historical explanations?
For example, you say "I live" instead of saying "I lives". | 2013/12/07 | [
"https://english.stackexchange.com/questions/140772",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/57039/"
] | In regular verbs, it’s the third person singular which changes in the present tense. Just because “I live” is the same as “we live,” it does not mean that *live* is a plural form when used with *I.* It’s a singular form which happens to be the same as the plural form.
The third person singular is the exception. | Your question implies some *a priori* reason to expect nouns and verbs to "adhere to the same system" in the first place with regard to plural marking (or presumably, by extension, marking of other features). But it's not clear, looking across languages generally, that there's much pressure for languages to evolve in t... |
20,611 | My system forwards encrypted and/or signed messages on a gossip network. Replay is part of the design. What should I do with the nonce? I'm tempted to just set it to the same number always. Is this a bad idea? | 2014/12/03 | [
"https://crypto.stackexchange.com/questions/20611",
"https://crypto.stackexchange.com",
"https://crypto.stackexchange.com/users/18620/"
] | It can be safe, but using the same key in both directions adds several things you need to be careful about:
* One thing you need to make sure is not a problem is if an attacker takes a message from Alice to Bob, and sends it back to Alice as if it were from Bob. Since Bob to Alice communications use the same key, Alic... | The question is quite vague, but I'll answer the part of it that's specific.
It's not bad practice to use one symmetric key for both directions of the communication. It's the normal way to use symmetric crypto.
Having a separate symmetric key for each direction would not make it more secure, nor would it add authenti... |
20,611 | My system forwards encrypted and/or signed messages on a gossip network. Replay is part of the design. What should I do with the nonce? I'm tempted to just set it to the same number always. Is this a bad idea? | 2014/12/03 | [
"https://crypto.stackexchange.com/questions/20611",
"https://crypto.stackexchange.com",
"https://crypto.stackexchange.com/users/18620/"
] | It can be safe, but using the same key in both directions adds several things you need to be careful about:
* One thing you need to make sure is not a problem is if an attacker takes a message from Alice to Bob, and sends it back to Alice as if it were from Bob. Since Bob to Alice communications use the same key, Alic... | In general - no, as mentioned above. But if it's used in addition with message sequencing and hashing - yes. Any symmetric cipher suffers from the simple problem, regardless of direction, that the same key is on both sides. |
118,133 | There is a stylistic device where you begin and end a text with the same metaphor. I'm sorry I don't have a "real-world" example in English, but I'll try to describe what I mean.
Let's say there's an article on software development. The article begins by likening the development process it to the construction of a car... | 2013/07/01 | [
"https://english.stackexchange.com/questions/118133",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/10344/"
] | There is a device that often appears in Hebrew writings known as **chiastic structure**. Essentially it extends *chiasmus* (a common literary device that relates clauses in criss-cross fashion—think *"the first shall be last and the last shall be first"*) to an entire passage. It is particularly common in Old Testament... | Within literary fiction, that might be called a *circular plot* or a *circular narrative style* - you begin and end the story at the same place. It is typically used to signify that the character achieved nothing from their struggles, or that "life goes on as it always does", etc. It is not exclusive to locations withi... |
118,133 | There is a stylistic device where you begin and end a text with the same metaphor. I'm sorry I don't have a "real-world" example in English, but I'll try to describe what I mean.
Let's say there's an article on software development. The article begins by likening the development process it to the construction of a car... | 2013/07/01 | [
"https://english.stackexchange.com/questions/118133",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/10344/"
] | There is a device that often appears in Hebrew writings known as **chiastic structure**. Essentially it extends *chiasmus* (a common literary device that relates clauses in criss-cross fashion—think *"the first shall be last and the last shall be first"*) to an entire passage. It is particularly common in Old Testament... | Maybe you are referring to [foreshadowing](https://en.wikipedia.org/wiki/Foreshadowing):
>
> Foreshadowing is a literary device in which a writer gives an advance hint of what is to come later in the story. Foreshadowing often appears at the beginning of a story, or a chapter, and it helps the reader develop expectat... |
118,133 | There is a stylistic device where you begin and end a text with the same metaphor. I'm sorry I don't have a "real-world" example in English, but I'll try to describe what I mean.
Let's say there's an article on software development. The article begins by likening the development process it to the construction of a car... | 2013/07/01 | [
"https://english.stackexchange.com/questions/118133",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/10344/"
] | There is a device that often appears in Hebrew writings known as **chiastic structure**. Essentially it extends *chiasmus* (a common literary device that relates clauses in criss-cross fashion—think *"the first shall be last and the last shall be first"*) to an entire passage. It is particularly common in Old Testament... | An extended form of [Epanalepsis](https://en.wikipedia.org/wiki/Epanalepsis) perhaps? |
13,869 | can somebody explain to me what happens or how do the correlation functions/partition functions in general behave (if such general answer/behavior exists and if not then why not) during a first and second order phase transition?
I think the answer is this:
1. Correlation function diverges @ phase transition.
2. 1st (... | 2011/08/23 | [
"https://physics.stackexchange.com/questions/13869",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/1349/"
] | The general rule is that in a first order transition the partition function (or its logarithm, the "free entropy" or free energy over T) is continuous but its derivative with respect to the thermodynamic parameter which is driving the transition is not. The reason is that as you come into the transition from the left, ... | You should have specify, what type of a correlation function you have in mind. You should agree that there may be many types. Without specification let me assume that the correlation function of the order parameter is understood. In this case, the correlator in k-space is given by the formula (146,8) of the book Statis... |
35,359,382 | I want to uninstall xampp and reinstall with the latest version. I've recently upgraded from Win7 to Win10 which I think is causing many of my problems.
I have saved all my files and folders, so that I can insert into the new version of xampp.
After I click "uninstall" I get this message "The uninstall.dat file canno... | 2016/02/12 | [
"https://Stackoverflow.com/questions/35359382",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/5079836/"
] | I need to answer my own question, in case another person has the same problem. I deleted the xampp folder to the recycle bin, downloaded Version 7.0.4, installed and uninstalled, then installed once more. Everything appears to be working now. This may have been a fault with Version 7.0.2 which is what I had these probl... | Copy paste required file into xampp folder and uninstall xampp as regular procedure via control panel. |
35,359,382 | I want to uninstall xampp and reinstall with the latest version. I've recently upgraded from Win7 to Win10 which I think is causing many of my problems.
I have saved all my files and folders, so that I can insert into the new version of xampp.
After I click "uninstall" I get this message "The uninstall.dat file canno... | 2016/02/12 | [
"https://Stackoverflow.com/questions/35359382",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/5079836/"
] | Actually I used XAMPP nearly four years ago during my college project, now not using it anymore, so I though to uninstall it but unfortunately got this same issue, just did a simple thing to resolve the issue, I had that setup from which I installed it, so using that I reinstalled it and then did the un-installation an... | Copy paste required file into xampp folder and uninstall xampp as regular procedure via control panel. |
135,477 | Can we add any two vectors? If not, why is that so?
I think this is not true, but I am not sure. My book says it is true, but I guess it is a misprint. For example, adding acceleration to velocity. | 2014/09/14 | [
"https://physics.stackexchange.com/questions/135477",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/56263/"
] | I doubt if your textbook makes it explicit, but the only sacred tenet in here is to respect [dimensional homogeneity](http://en.wikipedia.org/wiki/Homogeneity_(physics)#Dimensional_homogeneity). One can make no sense of the sum of quantities with different dimensions. | You can ague that you can add any vector, since you can look at a adding vectors with different units as other dimensions. So you example of adding velocity and acceleration, both in three spacial dimensions, will give you a six dimensional vector. An example of this would be [phase space](http://en.wikipedia.org/wiki/... |
135,477 | Can we add any two vectors? If not, why is that so?
I think this is not true, but I am not sure. My book says it is true, but I guess it is a misprint. For example, adding acceleration to velocity. | 2014/09/14 | [
"https://physics.stackexchange.com/questions/135477",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/56263/"
] | I doubt if your textbook makes it explicit, but the only sacred tenet in here is to respect [dimensional homogeneity](http://en.wikipedia.org/wiki/Homogeneity_(physics)#Dimensional_homogeneity). One can make no sense of the sum of quantities with different dimensions. | From the commentary to the question, the textbook in question appears to be a mathematics textbook rather than a physics textbook. In mathematics, any two elements of a vector space can be added to one another to yield another member of that space. This is one of the requisites of what it means for something to be a "v... |
135,477 | Can we add any two vectors? If not, why is that so?
I think this is not true, but I am not sure. My book says it is true, but I guess it is a misprint. For example, adding acceleration to velocity. | 2014/09/14 | [
"https://physics.stackexchange.com/questions/135477",
"https://physics.stackexchange.com",
"https://physics.stackexchange.com/users/56263/"
] | From the commentary to the question, the textbook in question appears to be a mathematics textbook rather than a physics textbook. In mathematics, any two elements of a vector space can be added to one another to yield another member of that space. This is one of the requisites of what it means for something to be a "v... | You can ague that you can add any vector, since you can look at a adding vectors with different units as other dimensions. So you example of adding velocity and acceleration, both in three spacial dimensions, will give you a six dimensional vector. An example of this would be [phase space](http://en.wikipedia.org/wiki/... |
88,420 | When I create my own dmg-images, I always attach a software license agreement to them. When I opened the flattened image, I always got the Jaguar "X" in the background of the agreement dialog, where I have to confirm to the SLA before the image will be mounted. I believe that since Lion, apple removed that, so the eula... | 2013/04/10 | [
"https://apple.stackexchange.com/questions/88420",
"https://apple.stackexchange.com",
"https://apple.stackexchange.com/users/47162/"
] | One easy way to create DMGs and play with every option is to use the popular [DropDMG](http://c-command.com/dropdmg/) from Michael Tsai. It's not free, but he has great support and it's very communicative and there's a trial version.
*Disclaimer: I'm not affiliated with Michael Tsai, but I've known him (and his produc... | I found out, that it is not possible – the "X" in the background is OS specific.
The last macOS version that showed it on mounting the image was Snow Leopard. All versions of macOS that followed after that did not use it anymore.
However, you could use an image within the Textfield, since it represents an RTF-File For... |
176,444 | Does anyone have any experience building a curbless shower pan? I have built multiple showers and have generally mastered the typical shower pan with a 3"-4" curb but we now have my wife's 91-year-old mother living with us and she has trouble stepping over the curb. We are getting ready to remodel her bathroom to make ... | 2019/10/14 | [
"https://diy.stackexchange.com/questions/176444",
"https://diy.stackexchange.com",
"https://diy.stackexchange.com/users/108080/"
] | To long for a comment
My niece is disabled and uses a wheelchair no curb shower pans are easy but remember the pan is now going to be 2-4x the size of a normal shower. We used a glass brick wall on the center to divide the bathroom up because the large unusual size. For her shower the floor has a slope from the opposi... | basically you build the whole room like it's a shower
(but you only need th waterfproof the floor and the walls near the shower)
usually what's done is to slope the bathroom floor towards the shower drain (either the whole bathroom or just the part near the shower. This is typically accomplished by raising the whole b... |
138,482 | i was studying SSB demodulation and learned that a local carrier is added to the SSB signal to make sure that envelope detection is possible. I came across a problem to find the percentage of power saved in this type of modulation if the modulation index is .5.
I tried to derive the expression, % saving = (Useful pow... | 2014/11/14 | [
"https://electronics.stackexchange.com/questions/138482",
"https://electronics.stackexchange.com",
"https://electronics.stackexchange.com/users/57288/"
] | When m=.5 total power is given by
Pt(total power)=pc(power of carrier)\*(1+m²/2)
=Pc(1+(0.5)²/2)
=1.125Pc
One sideband power
Psb=Pc.m²/4
=Pc.(0.5)²/4
=0.0625Pc
Savings In power
(1.125-0.0625)/1.125
=94.4% | The main advantage would be almost doubling spectral power density and almost halving bandwidth with the main disadvantage receivers not ready for the bandwidth and requiring linearity in the transmitter. Calculation is not very interesting in this cases to decide. |
11,829,913 | I have been looking for a good explanation of how to implement a password login system in a typical website environment. I have read some great wikipedia articles and SO Q&A and blogs etc but they always seem to focus on purely generating the hash rather than the whole process of creating hash sending which parts of it... | 2012/08/06 | [
"https://Stackoverflow.com/questions/11829913",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/1259261/"
] | You are confusing the purpose of the hashing. It is not intended to secure the password for wire transmission. The client does not generate the hash. the purpose of the hash is to prevent an attacker who compromises your database from being able to quickly use a pre-generated hash lookup table to determine what your us... | never ever implement it yourself! if you need it just for learning then @Chris answered you. but if you need for for a working software then don't do it. every language has security libraries and every data store (ldap, database) has password storing mechanism already implemented. use it, don't invent the wheel again b... |
48,036 | In Matthew 4 (The Message)
>
> For the third test, the Devil took him to the peak of a huge mountain. He gestured expansively, pointing out all the earth’s kingdoms, how glorious they all were. Then he said, “They’re yours—lock, stock, and barrel. **Just go down on your knees and worship me, and they’re yours.**”
>
... | 2020/05/26 | [
"https://hermeneutics.stackexchange.com/questions/48036",
"https://hermeneutics.stackexchange.com",
"https://hermeneutics.stackexchange.com/users/29582/"
] | The sphere of political power is different from the sphere of the supra-political divine power. Now, it is impossible to get the supra-political divine power, but by observing divine commandments and being born anew in Holy Spirit: such a person indeed will become a citizen of the Heavenly Kingdom and co-heir of Christ... | What the third temptation is saying is using military/governmental might to force beliefs on people is equal to worshiping Satan. Military might is justified to enforce freedom to believe, not the opposite. Church history hasn't done well grasping this concept, which has taken millennia to learn. It was the temptation ... |
48,036 | In Matthew 4 (The Message)
>
> For the third test, the Devil took him to the peak of a huge mountain. He gestured expansively, pointing out all the earth’s kingdoms, how glorious they all were. Then he said, “They’re yours—lock, stock, and barrel. **Just go down on your knees and worship me, and they’re yours.**”
>
... | 2020/05/26 | [
"https://hermeneutics.stackexchange.com/questions/48036",
"https://hermeneutics.stackexchange.com",
"https://hermeneutics.stackexchange.com/users/29582/"
] | The sphere of political power is different from the sphere of the supra-political divine power. Now, it is impossible to get the supra-political divine power, but by observing divine commandments and being born anew in Holy Spirit: such a person indeed will become a citizen of the Heavenly Kingdom and co-heir of Christ... | >
> NIV Matthew 4:9 "All this I will give you," he said, "if you will bow down and worship me."
>
>
>
If Jesus had bowed down and worshiped the tricky Satan, Satan would have had the authority. It's not exactly like when your kid says to you "If you play with me I will let you watch TV". It is more like when your ... |
48,036 | In Matthew 4 (The Message)
>
> For the third test, the Devil took him to the peak of a huge mountain. He gestured expansively, pointing out all the earth’s kingdoms, how glorious they all were. Then he said, “They’re yours—lock, stock, and barrel. **Just go down on your knees and worship me, and they’re yours.**”
>
... | 2020/05/26 | [
"https://hermeneutics.stackexchange.com/questions/48036",
"https://hermeneutics.stackexchange.com",
"https://hermeneutics.stackexchange.com/users/29582/"
] | The sphere of political power is different from the sphere of the supra-political divine power. Now, it is impossible to get the supra-political divine power, but by observing divine commandments and being born anew in Holy Spirit: such a person indeed will become a citizen of the Heavenly Kingdom and co-heir of Christ... | **How could the Devil test Jesus in the third test?**
The Bible tells us that Satan offered Jesus "all the kingdoms of the world and their glory" in exchange for one act of worship.
Matthew 4:8-10 (NASB)
>
> 8 Again, the devil \*took Him to a very high mountain and \*showed Him
> all the kingdoms of the world and t... |
48,036 | In Matthew 4 (The Message)
>
> For the third test, the Devil took him to the peak of a huge mountain. He gestured expansively, pointing out all the earth’s kingdoms, how glorious they all were. Then he said, “They’re yours—lock, stock, and barrel. **Just go down on your knees and worship me, and they’re yours.**”
>
... | 2020/05/26 | [
"https://hermeneutics.stackexchange.com/questions/48036",
"https://hermeneutics.stackexchange.com",
"https://hermeneutics.stackexchange.com/users/29582/"
] | The sphere of political power is different from the sphere of the supra-political divine power. Now, it is impossible to get the supra-political divine power, but by observing divine commandments and being born anew in Holy Spirit: such a person indeed will become a citizen of the Heavenly Kingdom and co-heir of Christ... | ### So how is the 3rd test even a test for Jesus as it is God who has authority over the world not the Devil?
Very interesting indeed! But look at the parallel account and what it says:
>
> "Then the Devil said to him: 'I will give you all this authority and their glory, *because it has been handed over to me,* and ... |
462,820 | could someone please suggest me if the sentence below is correct or not (in context to the usage of blend in/blend into)? Please also share the reason/logic behind your answer. Thanks.
>
> "Never imagined how beautifully one can blend comedy in a scary movie without compromising its thriller quotient."
>
>
>
Also... | 2018/09/02 | [
"https://english.stackexchange.com/questions/462820",
"https://english.stackexchange.com",
"https://english.stackexchange.com/users/314713/"
] | **Blend something into** means the thing being blended loses its original form.
This is apparent in cooking recipes:
>
> Blend the milk into the flour mixtures until smooth.
>
>
>
whereas: Here: "Never imagined how beautifully one can blend comedy in a scary movie without compromising its thriller quotient."
Th... | Blend into is more graceful, and it fits better with "without compromising" as one might say "stir warm cream into coffee without diluting its heat." The idea is that it's primarily a scary movie with some comedic elements.
"Thriller quotient" is the intended meaning. Both comedy and thriller are types of books, plays... |
14,025 | I've worked with a CEO of a small company who never admit its mistakes, but usually choose a scapegoat which will be blamed publicly. How to deal with this kind of situation in general?
Edit: I would prefer constructive solutions to conflicting ones. | 2013/08/28 | [
"https://workplace.stackexchange.com/questions/14025",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3163/"
] | Executive Summary
=================
Make sure you're not the scapegoat:
1. Try not to fail
2. If you do fail then fail with a smile
3. Be nice
Nobody Gets Blamed for Succeeding
=================================
Find a way to make whatever you are assigned work out. If it works, he can't blame you for its failure, a... | The right thing to do is leave - this is an oppressive environment and you shouldn't put up with it. However, for various reasons that option may not be available.
An alternative is to conference with the 'audience', the people that are being told the 'not quite right' story. If the boss spreads the manure around even... |
14,025 | I've worked with a CEO of a small company who never admit its mistakes, but usually choose a scapegoat which will be blamed publicly. How to deal with this kind of situation in general?
Edit: I would prefer constructive solutions to conflicting ones. | 2013/08/28 | [
"https://workplace.stackexchange.com/questions/14025",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3163/"
] | Couple options:
1. Side channels - if the concern is loss of reputation, then you need to get the word out informally to counter that.
2. Documentation - if the CEO is using his blame-stick to justify loss-of-pay, bad reviews, etc., then you need to start documenting the instructions given - if push comes to shove, yo... | The right thing to do is leave - this is an oppressive environment and you shouldn't put up with it. However, for various reasons that option may not be available.
An alternative is to conference with the 'audience', the people that are being told the 'not quite right' story. If the boss spreads the manure around even... |
14,025 | I've worked with a CEO of a small company who never admit its mistakes, but usually choose a scapegoat which will be blamed publicly. How to deal with this kind of situation in general?
Edit: I would prefer constructive solutions to conflicting ones. | 2013/08/28 | [
"https://workplace.stackexchange.com/questions/14025",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3163/"
] | Executive Summary
=================
Make sure you're not the scapegoat:
1. Try not to fail
2. If you do fail then fail with a smile
3. Be nice
Nobody Gets Blamed for Succeeding
=================================
Find a way to make whatever you are assigned work out. If it works, he can't blame you for its failure, a... | I'm not going to pretend this is an enjoyable situation, but are there any other negative consequences?
* Written formal reviews indicate poor performance
* Bonuses decreased
* promotions and pay raises denied
* denial of other privileges: expense account, time-off requests, free coffee, etc.
* dismissal
If so, this... |
14,025 | I've worked with a CEO of a small company who never admit its mistakes, but usually choose a scapegoat which will be blamed publicly. How to deal with this kind of situation in general?
Edit: I would prefer constructive solutions to conflicting ones. | 2013/08/28 | [
"https://workplace.stackexchange.com/questions/14025",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3163/"
] | Executive Summary
=================
Make sure you're not the scapegoat:
1. Try not to fail
2. If you do fail then fail with a smile
3. Be nice
Nobody Gets Blamed for Succeeding
=================================
Find a way to make whatever you are assigned work out. If it works, he can't blame you for its failure, a... | Couple options:
1. Side channels - if the concern is loss of reputation, then you need to get the word out informally to counter that.
2. Documentation - if the CEO is using his blame-stick to justify loss-of-pay, bad reviews, etc., then you need to start documenting the instructions given - if push comes to shove, yo... |
14,025 | I've worked with a CEO of a small company who never admit its mistakes, but usually choose a scapegoat which will be blamed publicly. How to deal with this kind of situation in general?
Edit: I would prefer constructive solutions to conflicting ones. | 2013/08/28 | [
"https://workplace.stackexchange.com/questions/14025",
"https://workplace.stackexchange.com",
"https://workplace.stackexchange.com/users/3163/"
] | Couple options:
1. Side channels - if the concern is loss of reputation, then you need to get the word out informally to counter that.
2. Documentation - if the CEO is using his blame-stick to justify loss-of-pay, bad reviews, etc., then you need to start documenting the instructions given - if push comes to shove, yo... | I'm not going to pretend this is an enjoyable situation, but are there any other negative consequences?
* Written formal reviews indicate poor performance
* Bonuses decreased
* promotions and pay raises denied
* denial of other privileges: expense account, time-off requests, free coffee, etc.
* dismissal
If so, this... |
3,785,085 | I am working with **mvc.net 2.0**, **sql server 2005**.
Is it possible to implement Apache Solr search on this platform? | 2010/09/24 | [
"https://Stackoverflow.com/questions/3785085",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/453780/"
] | If you mean Lucene search, you could take a look at [Examine](http://examine.codeplex.com/) it's a non-enterprise Lucene search.
If you need your search as a service then use Solr, you'll need to install a [Solr server](http://wiki.apache.org/solr/SolrInstall). For that you'll need to install [Tomcat](http://wiki.apa... | What you are trying to do is to use lucence. Solr is the client that you can use to query lucene and from what I know is that you donot need to build a client that specifically handles query calls to lucene. The beauty of solr is that it uses http calls to query lucene. So all you need is to use Solr to create your ind... |
3,785,085 | I am working with **mvc.net 2.0**, **sql server 2005**.
Is it possible to implement Apache Solr search on this platform? | 2010/09/24 | [
"https://Stackoverflow.com/questions/3785085",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/453780/"
] | There is a Solr example site called Solrnet which you may be interested in.
Source code:
<http://github.com/mausch/SolrNet>
Wiki:
<http://code.google.com/p/solrnet/> | What you are trying to do is to use lucence. Solr is the client that you can use to query lucene and from what I know is that you donot need to build a client that specifically handles query calls to lucene. The beauty of solr is that it uses http calls to query lucene. So all you need is to use Solr to create your ind... |
405,268 | First of all, I just want to make it clear that I'm not here to rant about my question being closed or demanding my post be reopened. I'm just curious.
The post in question is [this one](https://stackoverflow.com/questions/66226175/indexing-an-unsigned-long-variable-and-printing-the-result). The question is a bit too ... | 2021/02/17 | [
"https://meta.stackoverflow.com/questions/405268",
"https://meta.stackoverflow.com",
"https://meta.stackoverflow.com/users/13188071/"
] | I thought it was a fine question, and I haven't read the (vast!) number of comments that have been posted on it since yesterday, but I suspect the reason it was closed as "not reproducible" boils down to this fact: the "Vote to close" dialog does not have a radio button for "This question doesn't meet my standards for ... | Less-experienced C programmers may have run the code & not got your output, hence "not reproducible". (Sufficiently-experienced C programmers would know that, as I commented on your self-answer, this can happen since the code is subject to "implementation-defined behavior"--a technical term. Presumably they wouldn't cl... |
405,268 | First of all, I just want to make it clear that I'm not here to rant about my question being closed or demanding my post be reopened. I'm just curious.
The post in question is [this one](https://stackoverflow.com/questions/66226175/indexing-an-unsigned-long-variable-and-printing-the-result). The question is a bit too ... | 2021/02/17 | [
"https://meta.stackoverflow.com/questions/405268",
"https://meta.stackoverflow.com",
"https://meta.stackoverflow.com/users/13188071/"
] | I thought it was a fine question, and I haven't read the (vast!) number of comments that have been posted on it since yesterday, but I suspect the reason it was closed as "not reproducible" boils down to this fact: the "Vote to close" dialog does not have a radio button for "This question doesn't meet my standards for ... | My question has been closed again (this time by my approval) and comments and votes have mostly stopped coming. It seems like the dust has settled, so I just want to post a self-answer to this post too, just to tell my final opinion and a sort of update.
The first time my question was closed, I was definitely confused... |
405,268 | First of all, I just want to make it clear that I'm not here to rant about my question being closed or demanding my post be reopened. I'm just curious.
The post in question is [this one](https://stackoverflow.com/questions/66226175/indexing-an-unsigned-long-variable-and-printing-the-result). The question is a bit too ... | 2021/02/17 | [
"https://meta.stackoverflow.com/questions/405268",
"https://meta.stackoverflow.com",
"https://meta.stackoverflow.com/users/13188071/"
] | My question has been closed again (this time by my approval) and comments and votes have mostly stopped coming. It seems like the dust has settled, so I just want to post a self-answer to this post too, just to tell my final opinion and a sort of update.
The first time my question was closed, I was definitely confused... | Less-experienced C programmers may have run the code & not got your output, hence "not reproducible". (Sufficiently-experienced C programmers would know that, as I commented on your self-answer, this can happen since the code is subject to "implementation-defined behavior"--a technical term. Presumably they wouldn't cl... |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | Drupal does what you are asking from a basic install with quite a degree of fine grained control over members, profiles, permissions etc. I have set several up with little or no extra modules, plugins or programming.
I actually run one site with several hundred members with not problems. I am not saying you cannot do ... | In my experience, Drupal is far more flexible than Joomla. If you're comfortable with PHP, I'd recommend picking it. |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | I don't know much about Drupal but if you're using Joomla you may need to install something like [Community Builder](http://www.joomlapolis.com/) and/or [Simple ACL](http://extensions.joomla.org/extensions/access-a-security/frontend-access-control/4836). Joomla's default user management isn't great. | In my experience, Drupal is far more flexible than Joomla. If you're comfortable with PHP, I'd recommend picking it. |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | In my experience, Drupal is far more flexible than Joomla. If you're comfortable with PHP, I'd recommend picking it. | I think both Drupal and Joomla would be able to handle creating a basic version of what you describe. The turning point is going to be, what more you want to do.
One of Drupal's strengths is first truely uncovered when you develop. You can very easily customize the look and feel of your Drupal site. You'll have more f... |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | I vote for Drupal. Even Obama [has voted](http://techpresident.com/blog-entry/why-white-houses-embrace-drupal-matters-0) for Drupal. | I think both Drupal and Joomla would be able to handle creating a basic version of what you describe. The turning point is going to be, what more you want to do.
One of Drupal's strengths is first truely uncovered when you develop. You can very easily customize the look and feel of your Drupal site. You'll have more f... |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | I vote for Drupal. Even Obama [has voted](http://techpresident.com/blog-entry/why-white-houses-embrace-drupal-matters-0) for Drupal. | I already created 2 Drupal Sites and 1 Joomla Site with this Feature.
Since I've worked with Joomla some years too, I think I can give you some Hints on it:
Drupal is WAY more flexible and professional than Joomla. But you have to put some effort into it. But if you know how to use it, it will do what you want. And s... |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | Joomla and Community Builder / JomSocial should be a nice pair. | I already created 2 Drupal Sites and 1 Joomla Site with this Feature.
Since I've worked with Joomla some years too, I think I can give you some Hints on it:
Drupal is WAY more flexible and professional than Joomla. But you have to put some effort into it. But if you know how to use it, it will do what you want. And s... |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | Drupal does what you are asking from a basic install with quite a degree of fine grained control over members, profiles, permissions etc. I have set several up with little or no extra modules, plugins or programming.
I actually run one site with several hundred members with not problems. I am not saying you cannot do ... | I vote for Drupal. Even Obama [has voted](http://techpresident.com/blog-entry/why-white-houses-embrace-drupal-matters-0) for Drupal. |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | I don't know much about Drupal but if you're using Joomla you may need to install something like [Community Builder](http://www.joomlapolis.com/) and/or [Simple ACL](http://extensions.joomla.org/extensions/access-a-security/frontend-access-control/4836). Joomla's default user management isn't great. | I already created 2 Drupal Sites and 1 Joomla Site with this Feature.
Since I've worked with Joomla some years too, I think I can give you some Hints on it:
Drupal is WAY more flexible and professional than Joomla. But you have to put some effort into it. But if you know how to use it, it will do what you want. And s... |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | Drupal does what you are asking from a basic install with quite a degree of fine grained control over members, profiles, permissions etc. I have set several up with little or no extra modules, plugins or programming.
I actually run one site with several hundred members with not problems. I am not saying you cannot do ... | Definitely Drupal, especially if you already know advanced PHP.
Nobody has great user features out of the box, but Drupal has more and better quality user-related modules.
Look at drupalmodules.com for 'user' modules in the 6.x versions, and you'll see tons of related modules for each one you check out.
There are ... |
1,701,843 | Or maybe other OS cms?
I want to form a members website, with registration, member profile and member personal photo galleries
What would you suggest? I'm pretty advanced with PHP just don't have the time to develop from scratch | 2009/11/09 | [
"https://Stackoverflow.com/questions/1701843",
"https://Stackoverflow.com",
"https://Stackoverflow.com/users/207052/"
] | Drupal does what you are asking from a basic install with quite a degree of fine grained control over members, profiles, permissions etc. I have set several up with little or no extra modules, plugins or programming.
I actually run one site with several hundred members with not problems. I am not saying you cannot do ... | I think both Drupal and Joomla would be able to handle creating a basic version of what you describe. The turning point is going to be, what more you want to do.
One of Drupal's strengths is first truely uncovered when you develop. You can very easily customize the look and feel of your Drupal site. You'll have more f... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | **Mainstream Christian groups limit the term 'Christian' to those who believe Jesus is *the Christ* and agree with them about what that means.** The term 'Christian' isn't used for anyone who simply likes Jesus or believes he was special in some way. We can see this because Islam teaches that Jesus was a prophet, but M... | This is most definitely not the only reason that Jehovah's Witnesses and Mormons are often viewed as "non-Christian" but it is a major one. @metal had the right idea but it wouldn't let me comment on his post, so I am writing another answer instead. What some refer to as "Mainstream Christians" or "Mainstream Christian... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | **What is the basis that many mainstream Christian groups justify labeling groups like the Mormons and Jehovah’s Witnesses as Non Christians?**
As far as Catholicism is concerned and possible some other denominations may be concerned neither the Mormons and Jehovah’s Witnesses is because the Church has declared their ... | I'm new here but for more than 45 yrs I have done extensive research on the Bible and related matters.
**I. MAINSTREAM BASIS AGAINST LDS & JWs**
-----------------------------------------
Mainstream churches generally [very general usage here] believe that they are Bible based. The major reasons given are:
1. a. Mos... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | A fundamental issue here is that the term "Christian" admits different meanings. In a broad sense, a Christian is anyone who self-identifies as a follower of Jesus Christ (cf. [Acts 11:26](http://www.biblegateway.com/passage/?search=Acts11.26)), which would include all bodies such as Catholics, Orthodox, Anglicans, Pro... | **Mainstream Christian groups limit the term 'Christian' to those who believe Jesus is *the Christ* and agree with them about what that means.** The term 'Christian' isn't used for anyone who simply likes Jesus or believes he was special in some way. We can see this because Islam teaches that Jesus was a prophet, but M... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | Before we start to answer this, a little history is needed. Both the Latter-Day Saints and Jehovah's Witnesses are *Restorationist* churches. That means that they were founded on the belief that all the other churches in the world had ceased to hold to the whole correct Christian doctrine, and that a direct revelation ... | A fundamental issue here is that the term "Christian" admits different meanings. In a broad sense, a Christian is anyone who self-identifies as a follower of Jesus Christ (cf. [Acts 11:26](http://www.biblegateway.com/passage/?search=Acts11.26)), which would include all bodies such as Catholics, Orthodox, Anglicans, Pro... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | I want to preface the rest of this with the statement that I am merely answering the question. I am not saying whether mainstream Christians are right or wrong in their position. But I am going to answer exactly the question by showing why they classify these two groups as non-Christians and backing it up with referenc... | **Mainstream Christian groups limit the term 'Christian' to those who believe Jesus is *the Christ* and agree with them about what that means.** The term 'Christian' isn't used for anyone who simply likes Jesus or believes he was special in some way. We can see this because Islam teaches that Jesus was a prophet, but M... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | A fundamental issue here is that the term "Christian" admits different meanings. In a broad sense, a Christian is anyone who self-identifies as a follower of Jesus Christ (cf. [Acts 11:26](http://www.biblegateway.com/passage/?search=Acts11.26)), which would include all bodies such as Catholics, Orthodox, Anglicans, Pro... | This is most definitely not the only reason that Jehovah's Witnesses and Mormons are often viewed as "non-Christian" but it is a major one. @metal had the right idea but it wouldn't let me comment on his post, so I am writing another answer instead. What some refer to as "Mainstream Christians" or "Mainstream Christian... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | Before we start to answer this, a little history is needed. Both the Latter-Day Saints and Jehovah's Witnesses are *Restorationist* churches. That means that they were founded on the belief that all the other churches in the world had ceased to hold to the whole correct Christian doctrine, and that a direct revelation ... | **What is the basis that many mainstream Christian groups justify labeling groups like the Mormons and Jehovah’s Witnesses as Non Christians?**
As far as Catholicism is concerned and possible some other denominations may be concerned neither the Mormons and Jehovah’s Witnesses is because the Church has declared their ... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | Before we start to answer this, a little history is needed. Both the Latter-Day Saints and Jehovah's Witnesses are *Restorationist* churches. That means that they were founded on the belief that all the other churches in the world had ceased to hold to the whole correct Christian doctrine, and that a direct revelation ... | **Mainstream Christian groups limit the term 'Christian' to those who believe Jesus is *the Christ* and agree with them about what that means.** The term 'Christian' isn't used for anyone who simply likes Jesus or believes he was special in some way. We can see this because Islam teaches that Jesus was a prophet, but M... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | This is most definitely not the only reason that Jehovah's Witnesses and Mormons are often viewed as "non-Christian" but it is a major one. @metal had the right idea but it wouldn't let me comment on his post, so I am writing another answer instead. What some refer to as "Mainstream Christians" or "Mainstream Christian... | I'm new here but for more than 45 yrs I have done extensive research on the Bible and related matters.
**I. MAINSTREAM BASIS AGAINST LDS & JWs**
-----------------------------------------
Mainstream churches generally [very general usage here] believe that they are Bible based. The major reasons given are:
1. a. Mos... |
24,217 | If there is no clear definition stemming from the Bible of what makes one a Christian, how does mainstream Christianity justify labeling groups like the Mormons and Jehovah Witnesses as Non Christians?
Members from both groups seem to take a more active role in spreading Christ's message of salvation than do the most ... | 2013/12/29 | [
"https://christianity.stackexchange.com/questions/24217",
"https://christianity.stackexchange.com",
"https://christianity.stackexchange.com/users/9200/"
] | **What is the basis that many mainstream Christian groups justify labeling groups like the Mormons and Jehovah’s Witnesses as Non Christians?**
As far as Catholicism is concerned and possible some other denominations may be concerned neither the Mormons and Jehovah’s Witnesses is because the Church has declared their ... | This is most definitely not the only reason that Jehovah's Witnesses and Mormons are often viewed as "non-Christian" but it is a major one. @metal had the right idea but it wouldn't let me comment on his post, so I am writing another answer instead. What some refer to as "Mainstream Christians" or "Mainstream Christian... |
906 | For tribes that inhabited desert areas (e.g. Arabian Peninsula, Sahara, etc...), there seems to have been a problem: a good bow would likely require materials that would be hard to come by in the desert (wood from trees).
1. Is there an evidence that this was indeed a factor influencing the use of bow and arrows as mi... | 2011/12/08 | [
"https://history.stackexchange.com/questions/906",
"https://history.stackexchange.com",
"https://history.stackexchange.com/users/332/"
] | Horn would seem the obvious solution to a lack of wood | I have a feeling you're not going to find any studies of this nature. Before synthetics, wood was just the only material with the properties needed to make a bow.
If you lived somewhere without trees and you wanted bows, you'd buy wood from somewhere else. The amount of wood needed to supply a tribe with bows would n... |
906 | For tribes that inhabited desert areas (e.g. Arabian Peninsula, Sahara, etc...), there seems to have been a problem: a good bow would likely require materials that would be hard to come by in the desert (wood from trees).
1. Is there an evidence that this was indeed a factor influencing the use of bow and arrows as mi... | 2011/12/08 | [
"https://history.stackexchange.com/questions/906",
"https://history.stackexchange.com",
"https://history.stackexchange.com/users/332/"
] | Horn would seem the obvious solution to a lack of wood | Horn, cartridge, and bone have all been used to make bows, however, usually in laminate form with wood as another layer. Also, nearly every part of the world has some kind of wood growing nearby. |
906 | For tribes that inhabited desert areas (e.g. Arabian Peninsula, Sahara, etc...), there seems to have been a problem: a good bow would likely require materials that would be hard to come by in the desert (wood from trees).
1. Is there an evidence that this was indeed a factor influencing the use of bow and arrows as mi... | 2011/12/08 | [
"https://history.stackexchange.com/questions/906",
"https://history.stackexchange.com",
"https://history.stackexchange.com/users/332/"
] | Horn would seem the obvious solution to a lack of wood | Actually, people never live in a pure sand sea. In deserts they live in oasises, where there is food and trees. If you live somewhere where trees cannot grow, then there is no food either. |
906 | For tribes that inhabited desert areas (e.g. Arabian Peninsula, Sahara, etc...), there seems to have been a problem: a good bow would likely require materials that would be hard to come by in the desert (wood from trees).
1. Is there an evidence that this was indeed a factor influencing the use of bow and arrows as mi... | 2011/12/08 | [
"https://history.stackexchange.com/questions/906",
"https://history.stackexchange.com",
"https://history.stackexchange.com/users/332/"
] | Actually, people never live in a pure sand sea. In deserts they live in oasises, where there is food and trees. If you live somewhere where trees cannot grow, then there is no food either. | I have a feeling you're not going to find any studies of this nature. Before synthetics, wood was just the only material with the properties needed to make a bow.
If you lived somewhere without trees and you wanted bows, you'd buy wood from somewhere else. The amount of wood needed to supply a tribe with bows would n... |
906 | For tribes that inhabited desert areas (e.g. Arabian Peninsula, Sahara, etc...), there seems to have been a problem: a good bow would likely require materials that would be hard to come by in the desert (wood from trees).
1. Is there an evidence that this was indeed a factor influencing the use of bow and arrows as mi... | 2011/12/08 | [
"https://history.stackexchange.com/questions/906",
"https://history.stackexchange.com",
"https://history.stackexchange.com/users/332/"
] | Actually, people never live in a pure sand sea. In deserts they live in oasises, where there is food and trees. If you live somewhere where trees cannot grow, then there is no food either. | Horn, cartridge, and bone have all been used to make bows, however, usually in laminate form with wood as another layer. Also, nearly every part of the world has some kind of wood growing nearby. |
97,659 | I have over 5000 items in my inventory. Dropping them one by one is going to take days. Is there anyway I can drop say all L1 resonators together? | 2012/12/29 | [
"https://gaming.stackexchange.com/questions/97659",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/37501/"
] | There is actually no way to drop multiple items, but you shouldn't be just dropping them anyway -- share them with other users! | In a hangout the Niantic devs said that bulk actions are on their todo list. But they are a small team, so it probably won't be soon. |
97,659 | I have over 5000 items in my inventory. Dropping them one by one is going to take days. Is there anyway I can drop say all L1 resonators together? | 2012/12/29 | [
"https://gaming.stackexchange.com/questions/97659",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/37501/"
] | There is actually no way to drop multiple items, but you shouldn't be just dropping them anyway -- share them with other users! | Just press `CONTROL` aim the items and press drop button |
97,659 | I have over 5000 items in my inventory. Dropping them one by one is going to take days. Is there anyway I can drop say all L1 resonators together? | 2012/12/29 | [
"https://gaming.stackexchange.com/questions/97659",
"https://gaming.stackexchange.com",
"https://gaming.stackexchange.com/users/37501/"
] | In a hangout the Niantic devs said that bulk actions are on their todo list. But they are a small team, so it probably won't be soon. | Just press `CONTROL` aim the items and press drop button |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.