prompt
stringlengths
13
282
response
stringlengths
128
3.11k
Import specific keys from a config map to a deployment's environment variables.
Command: ```bash kubectl set env --keys=redis_host --from=configmap/global-config deployment/notification-handler-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable ...
Create a cluster role named "view" with the following permissions: allow proxy access and access to configmaps with the resource names "identity-provider" and "prod-api-gateway"
Command: ```bash kubectl create clusterrole view --verb=proxy --resource=configmaps --resource-name=identity-provider --resource-name=prod-api-gateway ``` What it does: Create a cluster role. Syntax: `kubectl create clusterrole NAME --verb=verb --resource=resource.group [--resource-name=resourcename] [--dry-run=serve...
List the resource(s) of type "rc" with the names "web", "service/security-service-rc", and "pods/api-service-pod"
Command: ```bash kubectl get rc/web service/security-service-rc pods/api-service-pod ``` What it does: Display one or many resources. Prints a table of the most important information about the specified resources. You can filter the list using a label selector and the --selector flag. If the desired resource type is n...
Create a cron job named backup-job that runs the command "psql" using the "postgres" image every minute
Command: ```bash kubectl create cronjob backup-job --image=postgres --schedule="*/1 * * * *" -- psql ``` What it does: Create a cron job with the specified name. Syntax: `kubectl create cronjob NAME --image=image --schedule='0/5 * * * ?' -- [COMMAND] [args...]` Helpful flags: "flag": "--output", "short": "-o", "defa...
Forward traffic from local port 8088 to port 5432 in the backend-pod pod. Make sure to listen on all addresses.
Command: ```bash kubectl port-forward --address 0.0.0.0 pod/backend-pod 8088:5432 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will ...
Execute the 'mongo' command inside the first container of the first pod of the load-balancer-deployment deployment.
Command: ```bash kubectl exec deploy/load-balancer-deployment -- mongo ``` What it does: Execute a command in a container. Syntax: `kubectl exec (POD | TYPE/NAME) [-c CONTAINER] [flags] -- COMMAND [args...]` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted, use...
Create a pod named "hazelcast" with the image "confluentinc/cp-kafka" and expose port 5000.
Command: ```bash kubectl run hazelcast --image=confluentinc/cp-kafka --port=5000 ``` What it does: Create and run a particular image in a pod. Syntax: `kubectl run NAME --image=image [--env="key=value"] [--port=port] [--dry-run=server|client] [--overrides=inline-json] [--command] -- [COMMAND] [args...]` Helpful flag...
Create a new secret named encryption-key-secret from the environment variables stored in the settings.env file
Command: ```bash kubectl create secret generic encryption-key-secret --from-env-file=path/to/settings.env ``` What it does: Create a secret based on a file, directory, or specified literal value. A single secret may package one or more key/value pairs. When creating a secret based on a file, the key will default to th...
Create a cluster role named "foo" with the verb "get" and the non-resource URL "/metrics" specified.
Command: ```bash kubectl create clusterrole "foo" --verb=get --non-resource-url=/metrics ``` What it does: Create a cluster role. Syntax: `kubectl create clusterrole NAME --verb=verb --resource=resource.group [--resource-name=resourcename] [--dry-run=server|client|none]` Helpful flags: "flag": "--output", "short": "...
Forward local ports to a pod selected by a deployment
Command: ```bash kubectl port-forward deployment/search-engine-deployment 8080 8088 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod wil...
Create a pod disruption budget named monitoring-pdb that will select all pods with the app=rails label and require at least one of them being available at any point in time
Command: ```bash kubectl create poddisruptionbudget monitoring-pdb --selector=app=rails --min-available=1 ``` What it does: Create a pod disruption budget with the specified name, selector, and desired minimum available pods. Syntax: `kubectl create poddisruptionbudget NAME --selector=SELECTOR --min-available=N [--dr...
Copy the local file /tmp/foo to the remote pod named task-processor-pod-17 in the prometheus namespace, and place it in the /etc/kubernetes directory.
Command: ```bash kubectl cp /tmp/foo prometheus/task-processor-pod-17:/etc/kubernetes ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted, us...
Create a new ExternalName service named external-email-service
Command: ```bash kubectl create service externalname external-email-service --external-name news-demo.news ``` What it does: Create an ExternalName service with the specified name. ExternalName service references to an external DNS address instead of only pods, which will allow application authors to reference service...
Update the pod 'database' with the annotation 'contact-email' and the value 'support@example.com'.
Command: ```bash kubectl annotate pods database contact-email=support@example.com ``` What it does: Update the annotations on one or more resources. All Kubernetes objects support the ability to store additional data with the object as annotations. Annotations are key/value pairs that can be larger than labels and inc...
Create an ingress called 'internal-ingress' with a rule that directs requests to testing.com/module and points to the service 'svc1' on port 8080
Command: ```bash kubectl create ingress internal-ingress --rule="testing.com/module=svc1:8080,tls=my-cert" ``` What it does: Create an ingress with the specified name. Syntax: `kubectl create ingress NAME --rule=host/path=service:port[,tls[=secret]]` Helpful flags: "flag": "--output", "short": "-o", "default": "", "...
Check if the user can list the specified job in the specified namespace.
Command: ```bash kubectl auth can-i list jobs.batch/notification-sender-job -n default ``` What it does: Check whether an action is allowed. VERB is a logical Kubernetes API verb like 'get', 'list', 'watch', 'delete', etc. TYPE is a Kubernetes resource. Shortcuts and groups will be resolved. NONRESOURCEURL is a partia...
Forward local port 3000 to port 8088 in the api-service-pod pod
Command: ```bash kubectl port-forward pod/api-service-pod 3000:8088 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be selected au...
Create a single ingress called 'app-proxy-ingress' that directs requests to foo.com/bar to svc1:8080 with a tls secret "my-cert"
Command: ```bash kubectl create ingress app-proxy-ingress --rule="foo.com/bar=svc1:8080,tls=my-cert" ``` What it does: Create an ingress with the specified name. Syntax: `kubectl create ingress NAME --rule=host/path=service:port[,tls[=secret]]` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage"...
Create a new config map named namespace-config by providing specific file paths for the keys instead of using file basenames on disk
Command: ```bash kubectl create configmap namespace-config --from-file=conf=/path/to/profiles/file1.txt --from-file=data=/path/to/settings/file2.txt ``` What it does: Create a config map based on a file, directory, or specified literal value. A single config map may package one or more key/value pairs. When creating a...
Rename a context in your kubeconfig file
Command: ```bash kubectl config rename-context testing-context team-beta-context ``` What it does: Renames a context from the kubeconfig file. CONTEXT_NAME is the context name that you want to change. NEW_NAME is the new name you want to set. Note: If the context being renamed is the 'current-context', this field will...
Copy the /tmp/foo_dir file on your local machine to the /tmp/bar_dir directory inside the kube-flannel/database-pod-2 pod in the kube-flannel namespace.
Command: ```bash kubectl cp /tmp/foo_dir kube-flannel/database-pod-2:/tmp/bar_dir ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted, use th...
Retrieve the deployments in the "dev-2.2.0" version of the "external-apps" API group and display them in YAML output format.
Command: ```bash kubectl get deployments.dev-2.2.0.external-apps -o yaml ``` What it does: Display one or many resources. Prints a table of the most important information about the specified resources. You can filter the list using a label selector and the --selector flag. If the desired resource type is namespaced yo...
Delete the pod named "cdn-service-pod" and wait for it to be deleted, with a timeout of 60 seconds.
Command: ```bash kubectl delete pod/cdn-service-pod kubectl wait --for=delete pod/busybox1 --timeout=60s ``` What it does: Experimental: Wait for a specific condition on one or many resources. The command takes multiple resources and waits until the specified condition is seen in the Status field of every given resour...
Forward all traffic from port 5000 on all IP addresses to port 6379 in the 'proxy-server-pod' pod.
Command: ```bash kubectl port-forward --address 0.0.0.0 pod/proxy-server-pod 5000:6379 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod ...
Import the 'secret_key' key from the 'db-config' config map into the 'monitoring-stack-deployment' deployment.
Command: ```bash kubectl set env --keys=secret_key --from=configmap/db-config deployment/monitoring-stack-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable definiti...
Start a pod named "hazelcast" using the image "mcr.microsoft.com/dotnet/core/runtime" and expose port 8082
Command: ```bash kubectl run hazelcast --image=mcr.microsoft.com/dotnet/core/runtime --port=8082 ``` What it does: Create and run a particular image in a pod. Syntax: `kubectl run NAME --image=image [--env="key=value"] [--port=port] [--dry-run=server|client] [--overrides=inline-json] [--command] -- [COMMAND] [args......
List the resources of specified types and names.
Command: ```bash kubectl get rc/web service/e-commerce-rc pods/log-aggregator-pod ``` What it does: Display one or many resources. Prints a table of the most important information about the specified resources. You can filter the list using a label selector and the --selector flag. If the desired resource type is name...
Embed the certificate authority data for the dev-cluster cluster entry
Command: ```bash kubectl config set-cluster dev-cluster --embed-certs --certificate-authority=~/.kube/star-cluster/kubernetes.ca.crt ``` What it does: Set a cluster entry in kubeconfig. Specifying a name that already exists will merge new fields on top of existing values for those fields. Syntax: `kubectl config set-...
Add a taint with key 'workload' on nodes having the label 'owner' set to 'john-doe'
Command: ```bash kubectl taint node -l owner=john-doe workload=testing-node-11:PreferNoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usag...
Edit the last-applied-configuration annotations of a deployment named 'python' using YAML
Command: ```bash kubectl apply edit-last-applied deployment/python ``` What it does: Edit the latest last-applied-configuration annotations of resources from the default editor. The edit-last-applied command allows you to directly edit any API resource you can retrieve via the command-line tools. It will open the edit...
Import environment variables from a secret to a deployment named backend-microservice-deployment
Command: ```bash kubectl set env --from=secret/api-secret-key deployment/backend-microservice-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable definitions in one o...
Create a new config map named global-config with the specified keys by using files instead of file basenames on disk
Command: ```bash kubectl create configmap global-config --from-file=properties=/path/to/data/file1.txt --from-file=key1=/path/to/properties/file2.txt ``` What it does: Create a config map based on a file, directory, or specified literal value. A single config map may package one or more key/value pairs. When creating ...
Set the service account of the "load-balancer-deployment" deployment to "dashboard"
Command: ```bash kubectl set serviceaccount deployment load-balancer-deployment dashboard ``` What it does: Update the service account of pod template resources. Possible resources (case insensitive) can be: replicationcontroller (rc), deployment (deploy), daemonset (ds), job, replicaset (rs), statefulset Syntax: `ku...
Copy the file /tmp/foo from the remote pod "logging/load-balancer-pod-9" to the local location /tmp/bar.
Command: ```bash kubectl cp logging/load-balancer-pod-9:/tmp/foo :/tmp/bar ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted, use the kubec...
Import the 'MAX_CONNECTIONS' key from the 'app-config' config map into the 'web-app-deployment' deployment
Command: ```bash kubectl set env --keys=MAX_CONNECTIONS --from=configmap/app-config deployment/web-app-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable definitions...
Create a pod disruption budget named "web-app-pdb" that selects all pods with the label "env=production" and requires a minimum of four of them to be available at any point in time.
Command: ```bash kubectl create poddisruptionbudget web-app-pdb --selector=env=production --min-available=4 ``` What it does: Create a pod disruption budget with the specified name, selector, and desired minimum available pods. Syntax: `kubectl create poddisruptionbudget NAME --selector=SELECTOR --min-available=N [--...
Set the service account of the deployment "backend-microservice-deployment" to "istio"
Command: ```bash kubectl set serviceaccount deployment backend-microservice-deployment istio ``` What it does: Update the service account of pod template resources. Possible resources (case insensitive) can be: replicationcontroller (rc), deployment (deploy), daemonset (ds), job, replicaset (rs), statefulset Syntax: ...
Expose the php deployment as a service on port 8081, connecting to the containers on port 9092
Command: ```bash kubectl expose deployment php --port=8081 --target-port=909200 ``` What it does: Expose a resource as a new Kubernetes service. Looks up a deployment, service, replica set, replication controller or pod by name and uses the selector for that resource as the selector for a new service on the specified ...
Create a service for the replicated 'alpine' pods, which serves on port 7000 and connects to the containers on port 8000.
Command: ```bash kubectl expose rc alpine --port=7000 --target-port=800000 ``` What it does: Expose a resource as a new Kubernetes service. Looks up a deployment, service, replica set, replication controller or pod by name and uses the selector for that resource as the selector for a new service on the specified port....
Copy the kube config file from your local machine to the `/tmp/bar` directory in the `istio-system/payment-gateway-pod-19` pod in the `default` namespace.
Command: ```bash kubectl cp ~/.config/kube istio-system/payment-gateway-pod-19:/tmp/bar ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted, ...
Import specific keys from a config map into a deployment
Command: ```bash kubectl set env --keys=CONFIG_FILE_PATH --from=configmap/kube-system-config deployment/api-server-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable...
Start a pod using the golang image, keep it running in the foreground, and do not restart it if it exits.
Command: ```bash kubectl run -i -t busybox --image=golang --restart=Never ``` What it does: Create and run a particular image in a pod. Syntax: `kubectl run NAME --image=image [--env="key=value"] [--port=port] [--dry-run=server|client] [--overrides=inline-json] [--command] -- [COMMAND] [args...]` Helpful flags: "fla...
Create and run a PHP pod, exposing port 8084
Command: ```bash kubectl run hazelcast --image=php --port=8084 ``` What it does: Create and run a particular image in a pod. Syntax: `kubectl run NAME --image=image [--env="key=value"] [--port=port] [--dry-run=server|client] [--overrides=inline-json] [--command] -- [COMMAND] [args...]` Helpful flags: "flag": "--file...
Forward traffic from port 9090 on all addresses to port 3000 in the chat-app-pod pod's network
Command: ```bash kubectl port-forward --address 0.0.0.0 pod/chat-app-pod 9090:3000 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will...
Import specific keys from a config map into the environment variables of a deployment.
Command: ```bash kubectl set env --keys=MAX_CONNECTIONS --from=configmap/namespace-config deployment/email-server-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable ...
Forward local ports 8081 to 8080 on the pod with the name "security-service-pod"
Command: ```bash kubectl port-forward pod/security-service-pod 8081 8080 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be select...
Forward local port 3000 to port 8080 in the pod named "web-app-pod"
Command: ```bash kubectl port-forward pod/web-app-pod 3000:8080 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be selected automa...
Create a deployment named 'app' that runs the 'python' image and exposes port 9000
Command: ```bash kubectl create deployment app --image=python --port=9000 ``` What it does: Create a deployment with the specified name. Syntax: `kubectl create deployment NAME --image=image -- [COMMAND] [args...]` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage": "Output format. One of: json...
Set the cluster field in the user-a-context context to staging-cluster
Command: ```bash kubectl config set contexts.user-a-context.cluster staging-cluster ``` What it does: Set an individual value in a kubeconfig file. PROPERTY_NAME is a dot delimited name where each token represents either an attribute name or a map key. Map keys may not contain dots. PROPERTY_VALUE is the new value yo...
Forward traffic from all addresses on port 9090 to port 8080 in the pod named "mypod".
Command: ```bash kubectl port-forward --address 0.0.0.0 pod/mypod 9090:8080 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be sel...
Import specific keys from a config map into a deployment's environment variables
Command: ```bash kubectl set env --keys=LOG_LEVEL --from=configmap/db-config deployment/gateway-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable definitions in one...
Forward port 8000 in the pod named "analytics-pod" to port 8888 on all addresses.
Command: ```bash kubectl port-forward --address 0.0.0.0 pod/analytics-pod 8888:8000 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod wil...
Create a pod disruption budget named 'web-app-pdb' that will select all pods with the 'project=my-project' label and require at least four of them being available at any point in time
Command: ```bash kubectl create poddisruptionbudget web-app-pdb --selector=project=my-project --min-available=4 ``` What it does: Create a pod disruption budget with the specified name, selector, and desired minimum available pods. Syntax: `kubectl create poddisruptionbudget NAME --selector=SELECTOR --min-available=N...
Copy the contents of '/var/run/secrets/kubernetes.io/serviceaccount/' directory from the remote pod named 'file-server-pod-14' in the default namespace to the '/tmp/bar' directory on your local machine.
Command: ```bash kubectl cp default/file-server-pod-14:/var/run/secrets/kubernetes.io/serviceaccount/ :/tmp/bar ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Cont...
Create a cluster role named "bar" with specific SubResources allowed.
Command: ```bash kubectl create clusterrole bar --verb=patch,proxy,delete --resource=endpoints,endpoints/status ``` What it does: Create a cluster role. Syntax: `kubectl create clusterrole NAME --verb=verb --resource=resource.group [--resource-name=resourcename] [--dry-run=server|client|none]` Helpful flags: "flag":...
Add a taint with key 'app' on nodes having label role=database, with the value 'dev-node-4' and the effect 'PreferNoSchedule'.
Command: ```bash kubectl taint node -l role=database app=dev-node-4:PreferNoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage": "Output...
Create a pod disruption budget named messaging-pdb that will select all pods with the owner=team-1 label and require minimum 9 of them being available at any point in time
Command: ```bash kubectl create poddisruptionbudget messaging-pdb --selector=owner=team-1 --min-available=9 ``` What it does: Create a pod disruption budget with the specified name, selector, and desired minimum available pods. Syntax: `kubectl create poddisruptionbudget NAME --selector=SELECTOR --min-available=N [--...
List the replication controller with the name "web", the service with the name "email-service" and the pod with the name "security-service-pod".
Command: ```bash kubectl get rc/web service/email-service-rc pods/security-service-pod ``` What it does: Display one or many resources. Prints a table of the most important information about the specified resources. You can filter the list using a label selector and the --selector flag. If the desired resource type is...
Forward local ports 8088 and 6000 to ports 8081 and 6000 on the pod named api-service-pod
Command: ```bash kubectl port-forward pod/api-service-pod 8088 8081 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be selected au...
Get the output from the 'quantum-quark' container in the 'monitoring-pod' pod.
Command: ```bash kubectl attach monitoring-pod -c quantum-quark ``` What it does: Attach to a process that is already running inside an existing container. Syntax: `kubectl attach (POD | TYPE/NAME) -c CONTAINER` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted,...
Scale the replica set named 'webapp-replicaset' to a desired number of 3 replicas.
Command: ```bash kubectl scale --replicas=3 rs/webapp-replicaset ``` What it does: Set a new size for a deployment, replica set, replication controller, or stateful set. Scale also allows users to specify one or more preconditions for the scale action. If --current-replicas or --resource-version is specified, it is va...
Add a taint with key 'zone' on nodes having label zone=us-east-1
Command: ```bash kubectl taint node -l zone=us-east-1 zone=backup-node-14:PreferNoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage": "...
Import the SMTP_SERVER key from the env-vars config map and set it as an environment variable in the user-management-deployment deployment.
Command: ```bash kubectl set env --keys=SMTP_SERVER --from=configmap/env-vars deployment/user-management-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable definitio...
Add a taint with key 'hardware' on nodes having label tier=frontend
Command: ```bash kubectl taint node -l tier=frontend hardware=app-node-6:PreferNoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage": "O...
Import specific keys from a config map to a deployment
Command: ```bash kubectl set env --keys=REDIS_HOST --from=configmap/kube-system-config deployment/user-management-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable ...
Forward port 8088 to port 5000 in the pod "analytics-pod"
Command: ```bash kubectl port-forward pod/analytics-pod 8088:5000 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be selected auto...
Create a cron job named 'metrics-collection' with the command 'yum install -y aws-cli' inside a pod using the 'amazonlinux' image
Command: ```bash kubectl create cronjob metrics-collection --image=amazonlinux --schedule="*/1 * * * *" -- yum install -y aws-cli ``` What it does: Create a cron job with the specified name. Syntax: `kubectl create cronjob NAME --image=image --schedule='0/5 * * * ?' -- [COMMAND] [args...]` Helpful flags: "flag": "--...
create a service named "frontend" that exposes the pod "payment-gateway-pod" on port 8089
Command: ```bash kubectl expose pod payment-gateway-pod --port=8089 --name=frontend ``` What it does: Expose a resource as a new Kubernetes service. Looks up a deployment, service, replica set, replication controller or pod by name and uses the selector for that resource as the selector for a new service on the specif...
Add the 'contact-email' annotation to the 'chat-app' pod with the value 'support@example.com'
Command: ```bash kubectl annotate pods chat-app contact-email=support@example.com ``` What it does: Update the annotations on one or more resources. All Kubernetes objects support the ability to store additional data with the object as annotations. Annotations are key/value pairs that can be larger than labels and inc...
Forward local port 8888 to port 8088 in the frontend-pod pod. Use the command "kubectl port-forward pod/frontend-pod 8888:8088"
Command: ```bash kubectl port-forward pod/frontend-pod 8888:8088 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be selected autom...
Forward traffic from local port 3000 to port 8081 in a pod selected by the "web-app-deployment" deployment.
Command: ```bash kubectl port-forward deployment/web-app-deployment 3000 8081 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be s...
Delete the pods and services with names "gateway" and "backend"
Command: ```bash kubectl delete pod,service gateway backend ``` What it does: Delete resources by file names, stdin, resources and names, or by resources and label selector. JSON and YAML formats are accepted. Only one type of argument may be specified: file names, resources and names, or resources and label selector....
Rename the context 'old-name' to 'user-a-context' in your kubeconfig file
Command: ```bash kubectl config rename-context old-name user-a-context ``` What it does: Renames a context from the kubeconfig file. CONTEXT_NAME is the context name that you want to change. NEW_NAME is the new name you want to set. Note: If the context being renamed is the 'current-context', this field will also be u...
Create a new config map named app-config-dev with the specified keys. The keys should be sourced from the given file paths.
Command: ```bash kubectl create configmap app-config-dev --from-file=properties=/path/to/preferences/file1.txt --from-file=key1=/path/to/settings/file2.txt ``` What it does: Create a config map based on a file, directory, or specified literal value. A single config map may package one or more key/value pairs. When cre...
Copy a file from a remote pod to a local directory
Command: ```bash kubectl cp default/security-scanner-pod-18:/tmp/foo /tmp/bar_dir ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted, use th...
Add a taint with the key 'hardware' and value 'storage-node-13' on nodes with the label 'instance=app-instance-1'
Command: ```bash kubectl taint node -l instance=app-instance-1 hardware=storage-node-13:PreferNoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": ...
Retrieve the previous terminated logs of the rocket-ranger container in the vpn-service-pod
Command: ```bash kubectl logs -p -c rocket-ranger vpn-service-pod ``` What it does: Print the logs for a container in a pod or specified resource. If the pod has only one container, the container name is optional. Syntax: `kubectl logs [-f] [-p] (POD | TYPE/NAME) [-c CONTAINER]` Helpful flags: "flag": "--container",...
Create a pod disruption budget named payment-gateway-pdb
Command: ```bash kubectl create poddisruptionbudget payment-gateway-pdb --selector=version=v2 --min-available=1 ``` What it does: Create a pod disruption budget with the specified name, selector, and desired minimum available pods. Syntax: `kubectl create poddisruptionbudget NAME --selector=SELECTOR --min-available=N...
Retrieve the logs from the container backend-microservice-deployment-1 in the deployment named web-app-pod
Command: ```bash kubectl logs deployment/backend-microservice-deployment -c web-app-pod-1 ``` What it does: Print the logs for a container in a pod or specified resource. If the pod has only one container, the container name is optional. Syntax: `kubectl logs [-f] [-p] (POD | TYPE/NAME) [-c CONTAINER]` Helpful flags...
Add the taint with key 'datacenter' and value 'prod-node-5:PreferNoSchedule' on nodes having the label 'zone=us-east-1'
Command: ```bash kubectl taint node -l zone=us-east-1 datacenter=prod-node-5:PreferNoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage"...
Set the server field on the 'moon-cluster' cluster to use HTTPS with the address '1.2.3.4'
Command: ```bash kubectl config set clusters.moon-cluster.server https://1.2.3.4 ``` What it does: Set an individual value in a kubeconfig file. PROPERTY_NAME is a dot delimited name where each token represents either an attribute name or a map key. Map keys may not contain dots. PROPERTY_VALUE is the new value you w...
Create a cluster role named "custom_role" with ResourceName specified as "app-worker-1" for the "configmaps" resource
Command: ```bash kubectl create clusterrole custom_role --verb=patch --resource=configmaps --resource-name=app-worker-1 --resource-name=app-worker-1 ``` What it does: Create a cluster role. Syntax: `kubectl create clusterrole NAME --verb=verb --resource=resource.group [--resource-name=resourcename] [--dry-run=server|...
Run the command 'pip --version' in the 'warp-drive' container of the 'e-commerce-pod' pod
Command: ```bash kubectl exec e-commerce-pod -c warp-drive -- pip --version ``` What it does: Execute a command in a container. Syntax: `kubectl exec (POD | TYPE/NAME) [-c CONTAINER] [flags] -- COMMAND [args...]` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted...
Delete the pods and services with the names "foo" and "chat-app"
Command: ```bash kubectl delete pod,service foo chat-app ``` What it does: Delete resources by file names, stdin, resources and names, or by resources and label selector. JSON and YAML formats are accepted. Only one type of argument may be specified: file names, resources and names, or resources and label selector. So...
Create a single ingress called 'public-ingress' that directs requests to foo.com/bar to the service named 'svc1' with the port '3306'
Command: ```bash kubectl create ingress public-ingress --rule="foo.com/bar=svc1:3306,tls=my-cert" ``` What it does: Create an ingress with the specified name. Syntax: `kubectl create ingress NAME --rule=host/path=service:port[,tls[=secret]]` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage": "...
Forward traffic from port 8088 on all addresses to port 9090 in the web-app-pod pod
Command: ```bash kubectl port-forward --address 0.0.0.0 pod/web-app-pod 8088:9090 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will ...
Import the 'SMTP_SERVER' key from the 'env-vars' config map and set it as an environment variable for the 'load-balancer-deployment' deployment.
Command: ```bash kubectl set env --keys=SMTP_SERVER --from=configmap/env-vars deployment/load-balancer-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable definitions...
Add a taint with the key "hardware" and value "dev-node-4:PreferNoSchedule" on nodes that have the label "service=auth".
Command: ```bash kubectl taint node -l service=auth hardware=dev-node-4:PreferNoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage": "Ou...
Copy the kube config file from local machine to a specific container in a remote pod
Command: ```bash kubectl cp ~/.config/kube auth-service-pod-11:/tmp/bar -c web-app-container ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omit...
Execute the 'ruby --version' command in the warp-drive container of the email-service-pod pod
Command: ```bash kubectl exec email-service-pod -c warp-drive -- ruby --version ``` What it does: Execute a command in a container. Syntax: `kubectl exec (POD | TYPE/NAME) [-c CONTAINER] [flags] -- COMMAND [args...]` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omi...
Update the annotation 'env' to 'staging' for the 'api' pod, overwriting any existing value
Command: ```bash kubectl annotate --overwrite pods api env='staging' ``` What it does: Update the annotations on one or more resources. All Kubernetes objects support the ability to store additional data with the object as annotations. Annotations are key/value pairs that can be larger than labels and include arbitrar...
Run the 'go run hello.go' command inside the vpn-service-pod pod, using the first container
Command: ```bash kubectl exec vpn-service-pod -- go run hello.go ``` What it does: Execute a command in a container. Syntax: `kubectl exec (POD | TYPE/NAME) [-c CONTAINER] [flags] -- COMMAND [args...]` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted, use the k...
Forward local port 3000 to port 8888 in the pod
Command: ```bash kubectl port-forward pod/proxy-server-pod 3000:8888 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be selected a...
Create a new secret named encryption-key-secret in the default namespace with key1=supersecret and key2=topsecret
Command: ```bash kubectl create secret generic encryption-key-secret --from-literal=key1=supersecret --from-literal=key2=topsecret ``` What it does: Create a secret based on a file, directory, or specified literal value. A single secret may package one or more key/value pairs. When creating a secret based on a file, t...
Import specific keys from a config map
Command: ```bash kubectl set env --keys=my-example-key --from=configmap/global-config deployment/web-app-deployment ``` What it does: Update environment variables on a pod template. List environment variable definitions in one or more pods, pod templates. Add, update, or remove container environment variable definitio...
Forward port 8888 on your local machine to port 3000 in the 'analytics-pod' pod.
Command: ```bash kubectl port-forward pod/analytics-pod 8888:3000 ``` What it does: Forward one or more local ports to a pod. Use resource type/name such as deployment/mydeployment to select a pod. Resource type defaults to 'pod' if omitted. If there are multiple pods matching the criteria, a pod will be selected auto...
Set a custom TLS server name for the "on-prem-cluster" cluster entry.
Command: ```bash kubectl config set-cluster on-prem-cluster --tls-server-name=data-cluster ``` What it does: Set a cluster entry in kubeconfig. Specifying a name that already exists will merge new fields on top of existing values for those fields. Syntax: `kubectl config set-cluster NAME [--server=server] [--certific...
Add a taint to a specific node in order to prevent pods from being scheduled on it.
Command: ```bash kubectl taint nodes testing-node-11 zone:NoSchedule ``` What it does: Update the taints on one or more nodes. Syntax: `kubectl taint NODE NAME KEY_1=VAL_1:TAINT_EFFECT_1 ... KEY_N=VAL_N:TAINT_EFFECT_N` Helpful flags: "flag": "--output", "short": "-o", "default": "", "usage": "Output format. One of: ...
Check if you have permission to list the "security-scan-job" job in the "development" namespace
Command: ```bash kubectl auth can-i list jobs.batch/security-scan-job -n development ``` What it does: Check whether an action is allowed. VERB is a logical Kubernetes API verb like 'get', 'list', 'watch', 'delete', etc. TYPE is a Kubernetes resource. Shortcuts and groups will be resolved. NONRESOURCEURL is a partial ...
Copy the `~/.config/kube` file from the `istio-system/auth-service-pod-11` pod to the `/tmp/bar_dir` directory locally
Command: ```bash kubectl cp istio-system/auth-service-pod-11:~/.config/kube /tmp/bar_dir ``` What it does: Copy files and directories to and from containers. Syntax: `kubectl cp <file-spec-src> <file-spec-dest>` Helpful flags: "flag": "--container", "short": "-c", "default": "", "usage": "Container name. If omitted,...