hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.9 Floor release
| Table 10.9.1.2.9-1 describes the information flow floor release, from the floor participant to the floor control server, which is used to indicate the media transfer is completed and floor is released. This information flow is sent in unicast to the floor control server.
Table 10.9.1.2.9-1: Floor release
Information ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.10 Floor taken
| Table 10.9.1.2.10-1 describes the information flow floor taken, from the floor control server to the floor participant, which is used to indicate the floor is granted to another MCPTT user. This information flows is sent in unicast or broadcast.
Table 10.9.1.2.10-1: Floor taken
Information element
Status
Descriptio... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.11 Floor revoked
| Table 10.9.1.2.11-1 describes the information flow floor revoked, from the floor control server to the floor participant and from the floor control server to the floor control server or MC gateway server, which is used to indicate the floor is revoked from its current holder (the floor participant who was granted the f... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.12 Floor acknowledgement
| Table 10.9.1.2.12-1 describes the information flow floor acknowledgement, from the floor participant to the floor control server, which is used to provide an acknowledgement if the acknowledgement is required in the received floor control message.
NOTE: The floor acknowledgement flow can be sent by the floor particip... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.13 Queue position request
| Table 10.9.1.2.13-1 describes the information flow queue position request, from the floor participant to the floor control server and from the floor control server to the floor control server or MC gateway server, which is used to request the position in the floor request queue. The MCPTT server and the MCPTT client su... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.14 Queue position info
| Table 10.9.1.2.14-1 describes the information flow queue position info, from the floor control server to the floor participant and from the floor control server to the floor control server or MC gateway server, which is used to indicate the floor request is queued and the queue position to the floor requesting UE and o... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.15 Unicast media stop request
| Table 10.9.1.2.15-1 describes the information flow unicast media stop request from the floor participant to the floor control server, which is used by the floor participant to indicate that the unicast media flow of the designated communication does not need to be sent to the MCPTT client.
Table 10.9.1.2.15-1: Unicast... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.2.16 Unicast media resume request
| Table 10.9.1.2.16-1 describes the information flow unicast media resume request from the floor participant to the floor control server, which is used by the floor participant to request that the unicast media flow of the designated communication is to be sent to the MCPTT client.
Table 10.9.1.2.16-1: Unicast media res... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3 Floor control with a single floor control server
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.1 Floor request, floor granted and floor taken during an MCPTT session
| Figure 10.9.1.3.1-1 shows the high level procedure that the floor control is conducted for the MCPTT session already established between the floor participant and the floor control server. Only three UEs involved in the session are shown for the simplicity.
Pre-condition:
1. MCPTT session is established between MCPTT... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.2 Floor override
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.2.1 Floor override using floor revoked (also floor rejected) during an MCPTT session
| Figure 10.9.1.3.2.1-1 shows the high level procedure that the floor control is conducted for the MCPTT session already established between the floor participant (with floor granted to floor participant B) and the floor control server (with an override based on priority). Only two UEs involved in the session are shown f... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.2.2 Floor override without using floor revoked during an MCPTT session
| Figure 10.9.1.3.2.2-1 shows the high level procedure that the floor control is conducted for the MCPTT session already established between the floor participants (with floor granted to floor participant B) and the floor control server (with an override based on priority and configured to permit the transmission of the ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.2.3 Floor override using floor revoked (also floor rejected) during an MCPTT session enhanced with multi-talker control
| Figure 10.9.1.3.2.3-1 shows the high-level procedure that the floor control allows several participants to talk simultaneously in a MCPTT session already established between the floor participant (with floor granted to floor participant B) and the floor control server. Only two UEs involved in the session are shown for... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.2.4 Floor release during an MCPTT session enhanced with multi-talker control
| Figure 10.9.1.3.2.4-1 shows the high-level procedure where the floor controller allows a participant to release the floor while other participants continue to talk simultaneously in a MCPTT session already established between the floor participants and the floor control server. Only three UEs involved in the session ar... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.3 Queue position during an MCPTT session
| Figure 10.9.1.3.3-1 shows the high level procedure that the floor control is conducted for the MCPTT session already established between MCPTT clients (with floor granted to floor participant B) and server (with an override based on priority at floor control server). Only two UEs involved in the session are shown for t... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.4 Floor request cancellation from the floor request queue
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.4.1 Floor request cancellation from the queue – MCPTT user initiated
| Figure 10.9.1.3.4.1-1 illustrates the procedure for floor request cancellation from the floor queue initiated by the MCPTT user. The MCPTT user may be an authorized user who has rights to cancel the floor requests of other MCPTT users, whose floor requests are in floor control queue.
Pre-conditions:
- It is assumed t... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.4.2 Floor request cancellation from the queue - floor control server initiated
| Figure 10.9.1.3.4.2-1 illustrates the procedure for floor request cancellation from the queue initiated by the floor control server. Only three UEs involved in the session are shown for the simplicity.
Pre-conditions:
- MCPTT session is established between MCPTT clients (client A, client B, client C and client D) and... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.5 Floor idle during an MCPTT session
| During silence (when no talk burst is ongoing), the floor control server may send floor idle message to all floor participants from time to time.
Figure 10.9.1.3.5-1 shows the high level procedure that the floor idle is conducted for the MCPTT session already established between the floor participant and the floor con... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.3.6 Floor revoke by the authorized user
| Figure 10.9.1.3.6-1 shows the high level procedure that the floor granted to a talker user is revoked by the authorized user. Only three MCPTT UEs involved in the session are shown on the figure for the simplicity.
Pre-condition:
1. The participant B is granted the floor and transmitting the voice media to the group.... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.4 Floor control with multiple floor control servers
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.4.1 Partner MCPTT system routes all floor control messages to primary MCPTT system's floor control server
| The MCPTT users belonging to different groups in multiple MCPTT systems will participate in MCPTT media services (group communication, private calls, etc.) in scenarios like group hierarchies and temporary groups formed by group regroup. In this service delivery model involving multiple groups from different MCPTT syst... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.4.2 Partner MCPTT system performs filtering of floor control messages entering and leaving the partner MCPTT system
| The MCPTT users belonging to different groups in multiple MCPTT systems will participate in MCPTT media services (group communication, private calls, etc.) in scenarios like group hierarchies and temporary groups formed by group regroup. In this service delivery model involving multiple groups from different MCPTT syst... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.5 Floor control for audio cut-in enabled group
| Figure 10.9.1.5-1 shows the procedure for audio cut-in for the session already established between the floor participants from same MCPTT service provider. Floor participants may request the floor while Floor Participant B is transmitting voice media. Floor control server grants floor immediately to the floor request r... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.1.6 Unicast media stop and resume requests
| Figure 10.9.1.6-1 shows the procedure for a floor participant to indicate to the floor control server that the unicast media flow of an active MCPTT group call can be stopped.
Pre-condition:
1. An MCPTT session is established between MCPTT client A and MCPTT server for an MCPTT group call. Other participants to the c... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2 Floor control for off-network MCPTT service
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.1 General
| The procedures defined in this subclause provide floor control to MCPTT UEs in off-network operation. The procedures apply to both private calls and group calls.
In off-network, floor control is performed by using floor control messages among the MCPTT clients without centralized MCPTT server. The MCPTT client can tra... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.2 Information flows for floor control for off-network
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.2.1 General
| For floor control for off-network, the information flows defined under subclause 10.9.1.2 apply unless it is explicitly defined under this subclause.
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.2.2 Floor granted
| Table 10.9.2.2.2-1 describes the information flow floor granted, from the floor participant to the floor participant, which is used to indicate that a request for floor is granted and media transfer is possible.
Table 10.9.2.2.2-1: Floor granted
Information element
Status
Description
MCPTT ID
M
Requester identi... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.3 Floor control during silence
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.3.1 Successful floor taken (No floor contention)
| If a floor arbitrator still exists, the expected behaviour for floor requests during periods of silence is described in subclauses 10.9.2.5 and 10.9.2.6 (with the exception that no media was being generated prior to the floor request).
If a floor arbitrator does not exist, figure 10.9.2.3.1-1 shows the successful high... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.4 Simultaneous floor requests
| If a floor arbitrator does not exist, figure 10.9.2.4.1-1 shows the expected behaviour in case of simultaneous floor requests are generated when there is no detectable talker.
Pre-conditions:
1. An off-network group call is established and all MCPTT clients have the call parameters. No participant is currently talki... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.5 Floor request during speaking with queue
| Figure 10.9.2.5-1 shows the high level procedure that the floor control is conducted when the MCPTT off-network session is already established among MCPTT floor participants and while voice media is transmitting. In the case, MCPTT clients should support queue function. The current speaking MCPTT client acting as the f... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.6 Floor request during speaking without queue
| Figure 10.9.2.6-1 shows the high level procedure that the floor control is conducted when the MCPTT off-network session is already established among MCPTT floor participants. In the case, MCPTT clients do not support queue function. The current speaking MCPTT client acting as the floor arbitrator controls the floor req... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.7 Override
| Figure 10.9.2.7-1 shows the high level procedure that the floor control is conducted when the MCPTT off-network session is already established among MCPTT floor participants and while voice media is transmitting. When the currently speaking MCPTT floor participant receives the floor request message from another floor p... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.9.2.8 Floor queue status
| Figure 10.9.2.8-1 shows the high level procedure that the floor control is conducted when the MCPTT off-network session is already established among MCPTT floor participants and while voice media is transmitting. If the floor control queueing is supported by the floor control mechanism, the current speaking MCPTT group... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10 Use of MBMS transmission (on-network)
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.1 Information flows for MBMS Transmission
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.1.1 MapGroupToBearer
| Table 10.10.1.1-1 describes the information flow to associate a MCPTT group call to a MBMS bearer. It is sent from the MCPTT server to the MCPTT client.
Table 10.10.1.1-1: MapGroupToBearer
Information element
Status
Description
MCPTT group ID
M
This element identifies the MCPTT group, in which the call is star... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.1.2 UnmapGroupFromBearer
| Table 10.10.1.2-1 describes the information flow to disconnect a MCPTT group call from a MBMS bearer. It is sent from the MCPTT server to the MCPTT client.
Table 10.10.1.2-1: UnmapGroupFromBearer
Information element
Status
Description
MCPTT group ID
M
This element identifies the MCPTT group which will no longer ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.1.3 Application paging
| Table 10.10.1.3-1 describes the information flow application paging from the MCPTT server to the MCPTT clients.
Table 10.10.1.3-1: Application paging
Information element
Status
Description
MCPTT Group ID (see NOTE)
O
This element identifies the MCPTT group which is paged by the application.
MCPTT ID (see NOTE)
... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.2 Use of pre-established MBMS bearers
| The MCPTT service shall support the procedure for using pre-established MBMS bearers as specified 3GPP TS 23.280 [16]. The MCPTT service shall use the MCPTT-1, MCPTT-6, MCPTT‑8 and MCPTT-9 reference points for this procedure.
MCPTT may use pre-established MBMS bearer for the different types of MCPTT group calls. Both ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.3 Use of dynamic MBMS bearer establishment
| The MCPTT service shall support the procedure for using dynamic MBMS bearers as specified 3GPP TS 23.280 [16]. The MCPTT service shall use the MCPTT-1, MCPTT-4, MCPTT-6, MCPTT‑7, MCPTT-8 and MCPTT-9 reference points for this procedure.
MCPTT may use dynamic MBMS bearer establishment for the different types of MCPTT gr... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.4 Call connect and disconnect over MBMS
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.4.1 General
| MBMS bearer can be used for MCPTT group calls. One MBMS bearer is not permanently associated to one specific group or group call. Before sending media packets of a group call over MBMS bearer, the MCPTT server shall send the association information between group call and the MBMS bearer. The group call setup procedure ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.4.2 Procedure
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.4.2.1 Call connect over MBMS
| In figure 10.10.4.2.1-1 the MCPTT client 1 is the client that initiate an MCPTT chat group call and also the transmitting client. MCPTT client 1 may, but does not have to, be in an MBMS service area. The MCPTT client 2 and MCPTT client 3 represents MCPTT clients receiving the MCPTT call over an MBMS bearer. There may b... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.4.2.2 Call disconnect over MBMS
| Figure 10.10.4.2.2-1 shows the high level procedure where an UnmapGroupFromBearer message is sent by the MCPTT server to the MCPTT clients to indicate that the MCPTT group call is being dissociated from the MBMS bearer.
Figure 10.10.4.2.2-1: Chat group call disconnect on MBMS bearer
1. An MCPTT group call is ongoin... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.5 Switching from MBMS bearer to unicast bearer
| The MCPTT service shall support the procedure for switching from MBMS bearer to unicast bearer as specified 3GPP TS 23.280 [16]. The MCPTT service shall use the MCPTT-1, MCPTT-4, MCPTT‑7, MCPTT-8 and MCPTT‑9 reference points for this procedure.
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.6 Enhanced MCPTT group call setup procedure with MBMS bearer
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.6.1 Description
| When the MCPTT server initiates a new MCPTT call, the MCPTT server shall decide to use unicast bearers or broadcast bearers for the downlink media. A similar decision may also be made for other types of media communication e.g. MCVideo. To decide to use broadcast or unicast involves a number of aspects. The figure 10.1... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.10.6.2 Procedure
| The procedure in figure 10.10.6.2-1 can be used in the following scenarios:
- Initiate a new call on unicast bearer
- Transfer an ongoing call from broadcast bearer to unicast bearers
Pre-conditions:
- There must be an active and announced MBMS bearer
Figure 10.10.6.2-1: Application paging over an MBMS bearer
1... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11 MCPTT resource management (on-network)
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11.1 General
| Procedures for resource management are defined in subclause 10.11 of 3GPP TS 23.280 [16].
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11.2 Request for unicast resources at session establishment
| Void
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11.3 Request for modification of unicast resources
| Void
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11.4 Management of multicast media bearers
| Void
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11.5 Request for resources with shared priority
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11.5.1 General
| Void
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.11.5.2 Procedure
| Void
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.12 MCPTT media plane transmissions with partner MCPTT systems (on-network)
| The MCPTT user is able to receive MCPTT media services (e.g. group communication, private calls) from partner MCPTT systems in normal and roaming conditions. In this service delivery model, the media plane transmissions between the MCPTT UE of the user and the partner MCPTT system can be achieved directly or via the pr... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.13 Location information (on-network)
| The MCPTT system makes use of all of the procedures for location management as specified in 3GPP TS 23.280 [16], utilising the CSC-14 reference point between the location management client and location management server and the CSC‑15 reference point between the MCPTT server and location management server.
- The MC se... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14 Ambient listening call
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.1 General
| The ambient listening call is a type of a private MCPTT call that only allows a "listened to" user to transmit media to a "listening" user such that there is no indication on the MCPTT UE of the "listened to" user about the call and the media transmission.
NOTE 1: "listened to" user refers to the user who is transmitt... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2 Information flows for ambient listening call
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.1 Ambient listening call request
| Table 10.14.2.1-1 describes the information flow ambient listening call request from the MCPTT client to the MCPTT server and MCPTT server to the MCPTT client.
Table 10.14.2.1-1: Ambient listening call request
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "listening" user
MCPTT ID
M
Th... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.2 Ambient listening call response
| Table 10.14.2.2-1 describes the information flow ambient listening call response from the MCPTT client to the MCPTT server and MCPTT server to the MCPTT client.
Table 10.14.2.2-1: Ambient listening call response
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "listening" user
MCPTT ID
M
... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.3 Ambient listening call release request
| Table 10.14.2.3-1 describes the information flow ambient listening call release request from the MCPTT client to the MCPTT server and MCPTT server to the MCPTT client.
Table 10.14.2.3-1: Ambient listening call release request
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "listening" user
... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.4 Ambient listening call release response
| Table 10.14.2.4-1 describes the information flow ambient listening call release response from the MCPTT client to the MCPTT server and MCPTT server to the MCPTT client.
Table 10.14.2.4-1: Ambient listening call release response
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "listening" use... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.5 Ambient listening call release notification
| Table 10.14.2.5-1 describes the information flow ambient listening call release notification from the MCPTT server to the MCPTT client.
Table 10.14.2.5-1: Ambient listening call release notification
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "listening" user
MCPTT ID
M
The MCPTT ID ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.6 Ambient listening call pause request
| Table 10.14.2.6-1 describes the information flow for ambient listening call pause request from the MCPTT client to the MCPTT server and from the MCPTT server to the MCPTT client.
Table 10.14.2.6-1: Ambient listening call pause request
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "listeni... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.7 Ambient listening call pause response
| Table 10.14.2.7-1 describes the information flow for ambient listening call pause response from the MCPTT server to the MCPTT client and from the MCPTT client to the MCPTT server.
Table 10.14.2.7-1: Ambient listening call pause response
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "liste... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.2.8 Ambient listening call resume request
| Table 10.14.2.8-1 describes the information flow for ambient listening call resume request from the MCPTT client to the MCPTT server and from the MCPTT server to the MCPTT client.
Table 10.14.2.8-1: Ambient listening call resume request
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the "liste... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.3 Ambient listening call procedures
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.3.1 Remotely initiated ambient listening call setup
| The MCPTT service provides the capability for an authorised user to initiate a remotely initiated ambient listening call at an MCPTT client.
Figure 10.14.3.1-1 illustrates the information flow for remotely initiated ambient listening call setup.
Pre-conditions:
- MCPTT client 1 is the client of the authorized user w... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.3.2 Locally initiated ambient listening call setup
| The MCPTT service provides the capability for an authorised user to initiate a locally initiated ambient listening call at an MCPTT client.
Figure 10.14.3.2-1 illustrates the information flow for locally initiated ambient listening call setup.
Pre-conditions:
- MCPTT client 2 is the client of the authorized user who... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.3.3 Ambient listening call release – server initiated
| Figure 10.14.3.3-1 illustrates the information flow for ambient listening call release – server initiated when trigger by the MCPTT administrator. This procedure is applied for both remotely initiated ambient listening call and the locally initiated ambient listening call.
Pre-conditions:
- MCPTT client 1 is the MCPT... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.3.4 Remotely initiated ambient listening call release – "listening" user initiated
| Figure 10.14.3.4-1 illustrates the information flow for ambient listening call release – "listening" user initiated. This procedure is applied for both remotely initiated ambient listening call and the locally initiated ambient listening call.
Pre-conditions:
- MCPTT client 1 is the MCPTT client of the authorized use... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.3.5 Ambient listening call release – "listened to" user initiated
| Figure 10.14.3.5-1 illustrates the information flow for ambient listening call release – "listened to" user initiated. This procedure is only applied for the locally initiated ambient listening call.
Pre-conditions:
- There is an ongoing ambient listening call between MCPTT client 1 and MCPTT client 2.
- MCPTT user ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.14.3.6 Ambient listening call pause and resume due to a new call
| Figure 10.14.3.6-1 illustrates the high-level procedure for ambient listening call being "paused" and "resumed" via the SDP re-negotiation. When a new call is detected at the "listened to" MCPTT client, the "listened to" MCPTT client sends the ambient listening call pause message to change the media plane to inactive i... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15 First-to-answer call setup
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.1 Description
| Figure 10.15.3-1 describes the basic procedure for the MCPTT client initiating MCPTT first-to-answer call. The flow may use a floor request in the MCPTT call request indicating that the originator will be given the floor when the call starts and eliminates the need for a separate initial floor request message during me... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.2 Information flows for first-to-answer call
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.2.1 MCPTT first-to-answer call request (MCPTT client to MCPTT server)
| Table 10.15.2.1-1 describes the information flow MCPTT first-to-answer call request from the MCPTT client to the MCPTT server.
Table 10.15.2.1-1: MCPTT first-to-answer call request (MCPTT client to MCPTT server) information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the calling pa... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.2.2 MCPTT first-to-answer call request (MCPTT server to MCPTT client)
| Table 10.15.2.2-1 describes the information flow MCPTT first-to-answer call request from the MCPTT server to the MCPTT client.
Table 10.15.2.2-1: MCPTT first-to-answer call request (MCPTT server to MCPTT client) information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the calling pa... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.2.3 MCPTT first-to-answer call response (MCPTT client to MCPTT server)
| Table 10.15.2.3-1 describes the information flow MCPTT first-to-answer call response from the MCPTT client to the MCPTT server.
Table 10.15.2.3-1: MCPTT first-to-answer call response (MCPTT client to MCPTT server) information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the calling ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.2.4 MCPTT first-to-answer call response (MCPTT server to MCPTT client)
| Table 10.15.2.4-1 describes the information flow MCPTT first-to-answer call response from the MCPTT server to the MCPTT client.
Table 10.15.2.4-1: MCPTT first-to-answer call response (MCPTT server to MCPTT client) information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of the calling ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.2.5 MCPTT first-to-answer call cancel request (MCPTT server to MCPTT client)
| Table 10.15.2.5-1 describes the information flow MCPTT first-to-answer call cancel request from the MCPTT server to the MCPTT client.
Table 10.15.2.5-1: MCPTT first-to-answer call cancel request (MCPTT server to MCPTT client) information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID of ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.2.6 MCPTT first-to-answer call cancel response (MCPTT client to MCPTT server)
| Table 10.15.2.6-1 describes the information flow MCPTT first-to-answer call cancel response from the MCPTT client to the MCPTT server.
Table 10.15.2.6-1: MCPTT first-to-answer call cancel response (MCPTT client to MCPTT server) information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID o... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.15.3 Procedure
| All clients are served by the primary MCPTT service provider in figure 10.15.3-1.
Pre-conditions:
1. The calling MCPTT user has selected first-to-answer call.
2. MCPTT clients 1 to n are registered and their respective users, MCPTT user 1 to MCPTT user n, are authenticated and authorized to use the MCPTT service, a... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.16 Remotely initiated MCPTT call
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.16.1 General
| A remotely initiated MCPTT call allows an authorized user to cause a remote MCPTT UE to initiate a call by itself, without its user explicitly initiating the call.
|
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.16.2 Information flows for remotely initiated MCPTT call
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.16.2.1 Remotely initiated MCPTT call request
| Table 10.16.2.1-1 describes the information flow remotely initiated MCPTT call request from the MCPTT client to the MCPTT server and from the MCPTT server to MCPTT client.
Table 10.16.2.1-1: remotely initiated MCPTT call request information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT ID ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.16.2.2 Remotely initiated MCPTT call response
| Table 10.16.2.2-1 describes the information flow remotely initiated MCPTT call response from the MCPTT client to the MCPTT server and from the MCPTT server to MCPTT client.
Table 10.16.2.2-1: Remotely initiated MCPTT call response information elements
Information Element
Status
Description
MCPTT ID
M
The MCPTT I... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.16.3 Procedure
| |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.16.3.1 Remotely initiated MCPTT call request
| The remotely initiated MCPTT call request procedure includes the initial remotely initiated MCPTT call request from the MCPTT user to the remote UE and either the MCPTT private call procedures or the MCPTT group call procedures originating at the remote UE.
Procedures in figure 10.16.3.1-1 show the signalling control ... |
654ce7f815f094ec84428f386a012c76 | 23.379 | 10.17 Support for multiple devices
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.