prefix stringlengths 0 918k | middle stringlengths 0 812k | suffix stringlengths 0 962k |
|---|---|---|
# Copyright (c) Twisted Matrix Laboratories.
# See LICENSE for details.
"""
Tests for L{twisted.internet._sigchld}, an alternate, superior SIGCHLD
monitoring API.
"""
import os, signal, errno
from twisted.python.log import msg
from twisted.trial.unittest import TestCase
from twisted.internet.fdesc import setNonBlock... | IG_DFL)
else:
self.signalModuleHandler = None
self.oldFD = self.installHandler(-1)
if self.signalModuleHandler is not None and self.oldFD != -1:
msg("SIGCHLD setup issue: %r %r" % (self | .signalModuleHandler, self.oldFD))
raise RuntimeError("You used some signal APIs wrong! Try again.")
def tearDown(self):
"""
Restore whatever signal handler was present when setUp ran.
"""
# If tests set up any kind of handlers, clear them out.
self.installHand... |
# Copyright (C) 2010-2011 Richard Lincoln
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish... | type of fuel
self.fuelCost = fuelCost
#: The type of fossil fuel, such as coal, oil, or gas. Values are: "oil", "coal", "lignite", "gas"
self.fossilFuelTyp | e = fossilFuelType
#: The active power output level of the unit at which the given type of fuel is switched off. This fuel (e.g., oil) is sometimes used to stabilize the base fuel (e.g., coal) at low active power output levels.
self.lowBreakpointP = lowBreakpointP
#: The cost of fuel used for ... |
# A Test Program for pipeTestService.py
#
# Install and start the Pipe Test service, then run this test
# either from the same machine, or from another using the "-s" param.
#
# Eg: pipeTestServiceClient.py -s server_name Hi There
# Should work.
from win32pipe import *
from win32file import *
from win32event import *
... | ait for all threads to finish.
WaitForMultipleObjects(thread_waits, 1, INFINITE)
def main():
import sys, getopt
server = "."
thread_count = 0
msg_count = 500
try:
opts, args = getopt.getopt(sys.argv[1:], 's:t:m:vl')
for o,a in | opts:
if o=='-s':
server = a
if o=='-m':
msg_count = int(a)
if o=='-t':
thread_count = int(a)
if o=='-v':
global verbose
verbose = 1
if o=='-l':
testLargeMessage(s... |
class Config:
# specific (for this development instance)
# SERVER_NAME = 'localhost:5000'
SQLALCHEMY_DATABASE_URI = "sqlite:///data.db"
ANTIVIRUS_CHECK_REQUIRED = False
SECRET_KEY = "toto"
# develop settings
DEBUG = True
ASSETS_DEBUG = True
DEBUG_TB_ENABLED = True
# TEMPLATE_DEB... | _PREFETCH_MULTIPLIER = 1
| CELERY_ALWAYS_EAGER = False # True: run tasks locally, no async
CELERY_EAGER_PROPAGATES_EXCEPTIONS = True
# uncomment if you don't want to use system timezone
# CELERY_TIMEZONE = 'Europe/Paris'
|
olic booleans as variadic positional arguments.
"""
if len(args) > 0 and isinstance(args[0], (list, tuple)):
raise Exception("Tuple or list passed to add_constraints!")
if o.TRACK_CONSTRAINTS in self.options and len(args) > 0:
if o.SIMPLIFY_CONSTRAINTS in self.options:
... | ugins:
self.se.downsize()
#
# State branching operations
#
def step(self, **kwargs):
"""
Perform a step of symbolic execution using this state.
Any arguments to `AngrObjectFactory.successors` can be passed to this.
:return: A SimSuccessors object categorizi... | he basic block at this state's instruction pointer.
Any arguments to `AngrObjectFactory.block` can ba passed to this.
:return: A Block object describing the basic block of code at this point.
"""
if not args and 'addr' not in kwargs:
kwargs['addr'] = self.addr
return... |
########## recombination.py parameters
class Recombination_Parameters(object):
# Change these two values to the folders you prefer - use an absolute path e.g. /Users/Harry/fastq-data and
# /Users/Harry/csv-data or a path relative to the tools directory.
# You may use the same folder for input and output.
... | ontains the
# actual signatures, separated by a comma (each serotype can have multiple signatures)
signatures = {
"AAV1": [
"AGTGCTTCAACGGGGGCCAG",
"GGGCGTGAATCCATCATCAACCCTGG",
"CCGGAGCTTCAAACACTGCATTGGACAAT"
],
"AAV2": [
"AGGCAACAGACAAGCA... | TTCATC"
],
"AAV7": [
"AGTGAAACTGCAGGTAGTACC"
],
"AAV8": [
"GCAAAACACGGCTCCTCAAAT",
"CAGCAAGCGCTGGAACCCCGAGATCCAGTA",
"AAATACCATCTGAATGGAAGAAATTCATTG",
"CGTGGCAGATAACTTGCAGC",
"ATCCTCCGACCACCTTCAACC"
],
... |
output_shape = ((2, 2048, 1, 1) if data_format == 'channels_first' else
(2, 1, 1, 2048))
self.assertEqual(output_shape, output.shape)
if data_format == 'channels_first':
block_shapes = {
'block0': (2, 64, 112, 112),
'block0mp': (2, 64, 55, 55),
'block1'... | ata_format)
apply_gradients(model, optimizer,
compute_gradients(model, images, labels))
self.assertEqual(320, len(model.variables))
context.async_wait()
events = events_fr | om_logdir(logdir)
self.assertEqual(len(events), 2)
self.assertEqual(events[1].summary.value[0].tag, 'loss')
@test_util.disable_tfrt('Flaky test. b/157103729')
def test_train(self):
self._test_train()
@test_util.disable_tfrt('TFE_ContextGetExecutorForThread missing b/156188669')
def test_train_asyn... |
#!/usr/bin/env python3
# 574A_bear.py - Codeforces.com/problemset/problem/574/A Bear program by Sergey 2015
import unittest
import sys
###############################################################################
# Bear Class
###############################################################################
class Be... | ####################################
class unitTests(unittest.TestCase):
def test_single_test(self):
""" Bear class testing """
# Constructor test
test = "5\n5 1 11 2 8"
d = Bear(test)
self.assertEqual(d.n, 5)
self.assertEqual(d.nums, [5, 1, 11, 2, 8])
# ... | mple test
test = "4\n1 8 8 8"
self.assertEqual(Bear(test).calculate(), "6")
# Sample test
test = "2\n7 6"
self.assertEqual(Bear(test).calculate(), "0")
# My tests
test = "4\n0 1 1 1"
self.assertEqual(Bear(test).calculate(), "2")
# Time limit tes... |
#!/usr/bin/python -O
#
# /usr/sbin/webapp-config
# Python script for managing the deployment of web-based
# applications
#
# Originally written for the Gentoo Linux distribution
#
# Copyright (c) 1999-2007 Authors
# Released under v2 of the GNU GPL
#
# Author(s) Stuart Herbert
# ... | ED_DIR' : None,
'VHOST_PERMS_VIRTUALOWNED_FILE': None,
'VHOST_PERMS_INSTALLDIR' : None,
'ROOT' | : self.__root,
'PN' : None,
'PVR': None}
result = {}
for i in list(export_map.keys()):
value = export_map[i]
if not value:
value = self.get_config(i.lower())
os.putenv(i, str(value))
... |
kld = GPSI.compute_fe_terms(xi, xo, xm, sample_count=10)
vfe = np.mean(nll) + np.mean(kld)
str1 = " va_nll_bound : {}".format(vfe)
str2 = " va_nll_term : {}".format(np.mean(nll))
str3 = " va_kld_q2p : {}".format(np.mean(kld))
joint_str = "\n".join(... | rng=rng)
############ | ####################################################
# Apply some updates, to check that they aren't totally broken #
################################################################
log_name = "{}_FINAL_RESULTS_NEW.txt".format(result_tag)
out_file = open(log_name, 'wb')
Xva = row_shuffle(Xva)
... |
# -*- coding: utf-8 -*-
# Gene | rated by Django 1.10.1 on 2016-12-09 01:29
from __future__ import unicode_literals
from django.db import migrations
class Migration(migrations.Migration):
dependencies = [("hordak", "0007_auto_20161209_0111")]
operations = [
migrations.RenameField("Account", "has_statements", "is_bank_account" | )
]
|
without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. '''
__version__ = "0.... | ,
'43': ('360x640', 'webm'),
'44': ('480x854', 'webm'),
'45': ('720x1280', 'webm'),
'46': ('1080x1920', 'webm'),
| '82': ('640x360-3D', 'mp4'),
'84': ('1280x720-3D', 'mp4'),
'100': ('640x360-3D', 'webm'),
'102': ('1280x720-3D', 'webm')}
def __init__(self, streammap, opener, title="ytvid"):
if not streammap.get("sig", ""):
streammap['sig'] = [_decrypt_signature(streammap['s'][0])]
... |
"""
Markup class allows the use of easy-to-write characters to style the text
instead of using escape codes.
==text== --> reverse video
'''text''' --> bold
~~text~~ --> strikethrough
Copyright (c) 2015
makos <https://github.com/makos>, chibi <http://neetco.de/chibi>
under GNU GPL v3, see LICENSE for details
"""
impo... | input_text = input_text.replace('\033', '\\033')
return input_text
def demarkify(self, input_text):
"""Prints out a marked-up piece of text."""
output_text = self.esc(input_text)
# strikethrough
output_text = re.sub(
'~~(?P<substring>.*?)~~', '\033[0;9m\g<substr... | tput_text)
# bold
output_text = re.sub(
'\'\'\'(?P<substring>.*?)\'\'\'', '\033[0;1m\g<substring>\033[0m',
output_text)
# rv
output_text = re.sub(
'==(?P<substring>.*?)==', '\033[0;7m\g<substring>\033[0m',
output_text)
return outpu... |
turn attr()
return attr
def get_feed(self, extra_params=None):
if extra_params:
try:
obj = self.get_object(extra_params.split('/'))
except (AttributeError, LookupError):
raise LookupError('Feed does not exist')
else:
obj =... | ler, data):
handler.startElement(u'source', {})
if data.get('id'):
handler.addQuickElement(u'id', data['id'])
if data.get('title'):
self.write_text_construct(handler, u'title', data['title'] | )
if data.get('subtitle'):
self.write_text_construct(handler, u'subtitle', data['subtitle'])
if data.get('icon'):
handler.addQuickElement(u'icon', data['icon'])
if data.get('logo'):
handler.addQuickElement(u'logo', data['logo'])
if data.get('updated'):... |
# Copyright (C) 2016
# Jakub Krajniak (jkrajniak at gmail.com)
#
# This file is part of ChemLab
#
# ESPResSo++ is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (... | .join(os.path.dirname(__file__), '..')))
import chemlab.gromacs_topology
class TestTopologyReader(unittest.TestCase):
@classmethod
def setUpClass(cls):
cls.topol_file = 'topol.top'
cls.gt = chemlab.gromacs_topology.GromacsTopology(cls.topol_file, generate_exclusions=True)
cls.gt.read()... | expected_nr_atoms = 0
for mol_name, nmols in self.gt.gt.molecules:
mol_atoms = len(self.gt.gt.molecules_data[mol_name]['atoms'])
expected_nr_atoms += nmols * mol_atoms
self.assertEqual(total_nr_atoms, expected_nr_atoms)
total_nr_bonds = len(self.gt.bonds)... |
has a good docstring.
# - Add methods for regex find and replace.
# - guess_content_type() method?
# - Perhaps support arguments to touch().
import sys, warnings, os, fnmatch, glob, shutil, codecs, hashlib
__version__ = '2.2'
__all__ = ['path']
# Platform-specific support for path.owner
if os.name == 'nt':
... | ):
r""" Return a list of the path components in this path.
The first item in the list will be a path. Its value will be
either os.curdir | , os.pardir, empty, or the root directory of
this path (for example, '/' or 'C:\\'). The other items in
the list will be strings.
path.path.joinpath(*result) will yield the original path.
"""
parts = []
loc = self
while loc != os.curdir and loc != os.pardir:
... |
# Copyright 2014-2015 Rumma & Ko Ltd
#
# License: GNU Affero General Public License v3 (see file COPYING for details)
"""Defines "parency links" between two "persons", and a user interface
to manage them.
This module is probably useful in combination with
:mod:`lino_xl.lib.households`.
.. autosummary::
:toctree:
... | o the model which represents a human in your
application. Default value is ``'contacts.Person'`` (referring to
:class:`lino_xl.lib.contacts.Person`).
"""
def on_site_startup(self, site):
self.person_model = site.models.resolve(self.person_model)
super(Plugin, self).on_site_startup(... | , site, user_type, m):
# mg = site.plugins.contacts
mg = site.plugins[self.person_model._meta.app_label]
m = m.add_menu(mg.app_label, mg.verbose_name)
m.add_action('humanlinks.Links')
m.add_action('humanlinks.LinkTypes')
|
from | investor_lifespan_model.investor import Investor
from investor_lifespan_model.market import Market
from investor_lifespan_model.insurer import Insurer
from investor_lifespan_model.lifespan_model import LifespanModel
f | rom investor_lifespan_model.mortality_data import π, G, tf
|
RegObj.dll is an ActiveX server--and, hence, has an automation interface--that is available with documentation in
the distribution file kno | wn as RegObji.exe, from the following page:
http://msdn.microsoft.com/vbasic/downloads/addins.asp
To provide early binding for RegObj use
>>> from win32com.client import gencache
>>> gencache.EnsureModule('{DE10C540-810E-11CF-BBE7-444553540000}', 0, 1, 0)
or the MakePy ut | ility within PythonWin, referring to "Regstration Manipulation Classes (1.0)" (Please notice
the spelling error.)
Sample use, to determine what command is associated with a Python file:
>>> from win32com.client import Dispatch, gencache
>>> from win32con import HKEY_CLASSES_ROOT
>>> gencache.EnsureModule('{DE10C540... |
# -*- coding: utf-8 -*-
##############################################################################
#
# OpenERP, Open Source Management Solution
# Copyright (C) 2004-2010 Tiny SPRL (<http://tiny.be>).
# Copyright (C) 2010-2012 ChriCar Beteiligungs- und Beratungs- GmbH (<http://www.camptocamp.at>)
#
# Thi... | Foundation, either version 3 of the
# License, or (at your option) any later ver | sion.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Affero General Public License for more details.
#
# You should have received a copy of the GNU A... |
from django.core.management.base import BaseCommand, CommandError
from geography.models import Place
class Command(BaseCommand):
help = u"""Add new places"""
usage_str = 'USAGE: ./manage.py add_places map_name STATE|CITY|RIVER|LAKE|... [difficulty]'
def handle(self, *args, **options):
if len(args... | .usage_str)
place_type = self.Place.PLACE_TYPE_SLUGS[args[1]]
map_name = args[0]
state_file = open(map_name.lower() + ".txt")
states = state_file.read()
ss = states.split("\n")
for s in ss:
place = s.split("\t")
if(len(place) == 2):
... | lace_type)
p.save()
self.stdout.write(name + " added")
|
from django.db import migrations, models
class Migration(migrations.Migration):
dependencies = [
('django_nyt', '0006_auto_20141229_1630'),
('wiki', '0001_initial'),
]
operations = [
migrations.CreateModel(
name | ='ArticleSubscription',
fields=[
('articleplugin_ptr', models.OneToOneField(auto_created=True, to='wiki.ArticlePlugin', primary_key=True, parent_link=True, serialize=False, on_delete=models.CASCADE)),
('subscription', models.OneToOneField(to='django_nyt.Subscription', on_del | ete=models.CASCADE)),
],
options={
},
bases=('wiki.articleplugin',),
),
migrations.AlterUniqueTogether(
name='articlesubscription',
unique_together=set([('subscription', 'articleplugin_ptr')]),
),
]
|
"""
Support for Vera cover - curtains, rollershutters etc.
For more details about this platform, please refer to the documentation at
https://home-assistant.io/components/cover.vera/
"""
import logging
from homeassistant.components.cover import CoverDevice
from homeassistant.components.vera import (
VeraDevice, V... | else:
return True
def open_cover(self, **kwargs):
"""Open the cover."""
self.vera_device.open( | )
def close_cover(self, **kwargs):
"""Close the cover."""
self.vera_device.close()
def stop_cover(self, **kwargs):
"""Stop the cover."""
self.vera_device.stop()
|
# -*- coding: utf-8 -*-
"""
@file costMemory.py
@author Jakob Erdmann
@author Michael Behrisch
@date 2012-03-14
@version $Id: costMemory.py 22608 2017-01-17 06:28:54Z behrisch $
Perform smoothing of edge costs across successive iterations of duaIterate
SUMO, Simulation of Urban MObility; see http://sumo.dlr.d... | # decay costs of unseen edges
self.num_decayed = 0
for edges in self.intervals.values():
for id, edgeMemory in edges.items():
if not edgeMemory.seen:
edgeMemory.update(
self.traveltime_free[id], self.memory_weight, self.new_weig... | # if id == "4.3to4.4":
# with open('debuglog', 'a') as f:
# print(self.memory_factor, 'decay', edgeMemory.cost, file=f)
# figure out the interval length
if len(self.intervals.keys()) > 1:
sorted_begin_times = sorted(self.intervals.key... |
#<ImportSpecificModules>
import ShareYourSystem as SYS
# | </ImportSpecificModules>
#print(SYS.SumClass().insert('Parameter').hdfview().HdformatedConsoleStr)
#print(SYS.SumClass().insert('Result').hdfview().HdformatedConsoleStr)
#print(SYS.Sum.attest_insert())
# | print(SYS.Sum.attest_retrieve())
#print(SYS.Sum.attest_find())
#print(SYS.Sum.attest_recover())
#print(SYS.Sum.attest_scan())
|
dtv_test2,
\t.platdata_size\t= sizeof(dtv_test2),
\t.parent_idx\t= -1,
};
/* Node /test3 index 2 */
static struct dtd_test3 dtv_test3 = {
\t.reg\t\t\t= {0x1234567890123456, 0x9876543210987654, 0x2, 0x3},
};
U_BOOT_DEVICE(test3) = {
\t.name\t\t= "test3",
\t.platdata\t= &dtv_test3,
\t.platdata_size\t= sizeof(dtv_test3),... | of na + ns = 1 + 1)",
str(e.exception))
def test_add_prop(self):
"""Test that a subequent node can | add a new property to a struct"""
dtb_file = get_dtb_file('dtoc_test_add_prop.dts')
output = tools.GetOutputFilename('output')
self.run_test(['struct'], dtb_file, output)
with open(output) as infile:
data = infile.read()
self._CheckStrings(HEADER + '''
struct dtd_san... |
import codecs
import mock
import os
import tempfile
import unittest
from time import strftime
import six
from kinto import config
from kinto import __version__
class ConfigTest(unittest.TestCase):
def test_transpose_parameters_into_template(self):
self.maxDiff = None
template = "kinto.tpl"
... | config.init('kinto.ini', 'memory')
args, kwargs = list(mocked_render_template.call_args)
self.assertEquals(args, ('kinto.tp | l', 'kinto.ini'))
self.assertDictEqual(kwargs, {
'secret': kwargs['secret'],
'storage_backend': 'kinto.core.storage.memory',
'cache_backend': 'kinto.core.cache.memory',
'permission_backend': 'kinto.core.permission.memory',
'storage_url': '',
... |
def max_rectangle(heights):
res = 0
heights.append(0)
stack = [0]
for i in range(1, len(heights)):
while stack and heights[i] < heights[stack[-1]]:
h = heights[stack.pop()]
w = i if not stack else i - stack[-1] - 1
res = max(res, h * w)
stack.append(i... | heights[j] | = 0 if matrix[i][j] == '0' else heights[j] + 1
ans = max(ans, max_rectangle(heights))
return ans
if __name__ == "__main__":
sol = Solution()
M = [['1', '0', '1', '0', '0'],
['1', '0', '1', '1', '1'],
['1', '1', '1', '1', '1'],
['1', '0', '0', '1', '0']]
print... |
#!/usr/bin/env python
# -*- co | ding: utf-8 -*-
# Copyright (c) 2015-2017:
# Frederic Mohier, frederic.mohier@alignak.net
#
"""
Alignak - C | hecks pack for NRPE monitored Linux hosts/services
"""
|
', 'yeux_enfonces', 'soif', 'pli_cutane', 'fievre_presence',
'fievre_presence_duree', 'fievre_presence_longue', 'tdr', 'urines_foncees', 'saignements_anormaux',
'raideur_nuque', 'ictere', 'choc', 'eruption_cutanee', 'ecoulement_nasal', 'yeux_rouge',
'ecoulement_oculaire',... | from custom.tdh.models import TDHEnrollChildFluff
return [k for k in TDHEnrollChildFluff().__dict__['_obj'].keys() if k not in UNNECESSARY_FIELDS]
class InfantTreatment(BaseSqlData):
table_name = "fluff_TDHInfantTreatmentFluff"
slug = 'infant_treatment'
title = 'Infant Treatment'
@propert... | []
@property
def group_by(self):
return ['case_id', 'infection_grave_treat_0', 'infection_grave_treat_1', 'infection_grave_treat_2',
'infection_grave_no_ref_treat_0', 'infection_grave_no_ref_treat_1',
'infection_grave_no_ref_treat_2', 'infection_grave_no_ref_treat_5', 'i... |
import numpy as np
import copy
import datetime as dt
import QSTK.qstkutil.qsdateutil as du
import QSTK.qstkutil.DataAccess as da
import QSTK.qstkstudy.EventProfiler as ep
from bollinger import Bollinger
"""
Accepts a list of symbols along with start and end date
Returns the Ev | ent Matrix which is a pandas Datamatrix
Event matrix has the following structure :
|IBM |GOOG|XOM |MSFT| GS | JP |
(d1)|nan |nan | 1 |nan |nan | 1 |
(d2)|nan | 1 |nan |nan |nan |nan |
(d3)| 1 |nan | 1 |nan | 1 |nan |
(d4)|nan | 1 |nan | 1 |nan |nan |
......... | ..........................
...................................
Also, d1 = start date
nan = no information about any event.
1 = status bit(positively confirms the event occurence)
"""
def find_events(ls_symbols, d_data):
df_close = d_data['close']
ts_market = df_close['SPY']
print "Finding Events"
# ... |
# This file is part of pybliographer
#
# Copyright (C) 1998-2004 Frederic GOBRY
# Email : gobry@pybliographer.org
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of t... | s] = key
skeys.append (s)
return table, skeys
def standard_date (entry, coding):
(text, month, day) = entry.format (coding)
if month: text = "%s/%s" % (month, text)
if day : text = "%s/%s" % (day, text)
return text
def last_first_full_authors (entry, coding):
return autho... | try, coding, 0, 1)
def first_last_full_authors (entry, coding):
return author_desc (entry, coding, 0, -1)
def full_authors (entry, coding):
return author_desc (entry, coding, 0, 0)
def initials_authors (entry, coding):
return author_desc (entry, coding, 1, 0)
def first_last_initials_authors (entry, cod... |
] = QtWidgets.QDockWidget('Plotting-' + str(count))
dock['Plotting-' + str(count)].setWidget(self.plottingWidget)
self.addDockWidget(QtCore.Qt.TopDockWidgetArea,
dock['Plotting-' + str(count)])
self.tabifyDockWidget(dock['Welcome'], dock['Plotting-' + str(count)])
... | ' + str(count)].setVisible(True)
dock['Plotting-' + str(count)].setFocus()
dock['Plotting-' + str(count)].raise_()
temp = self.obj_appconfig.current_project['ProjectName']
if temp:
self.obj_appconfig.dock_dict[temp].a | ppend(
dock['Plotting-' + str(count)]
)
count = count + 1
def ngspiceEditor(self, projDir):
""" This function creates widget for Ngspice window."""
self.projDir = projDir
self.projName = os.path.basename(self.projDir)
self.ngspiceNetlist = os.path... |
ry()
for in_feat_b in union_b.getFeatures(request):
count += 1
at_map_b = in_feat_b.attributes()
tmp_geom = geometry_checker(in_feat_b.geometry())
if engine.intersects(tmp_geom.constGet()):
int_geom = geometry_checker(geo... | QgsWkbTypes.GeometryCollection:
# Intersection produced different geometry types
temp_list = int_geom.as | GeometryCollection()
for i in temp_list:
if i.type() == geom.type():
int_geom = QgsGeometry(geometry_checker(i))
try:
_write_feature(
... |
import os
import glob
import subprocess
def expand_path(path):
return os.path.abspath(os.path.expandvars(os.path.expanduser(path)))
def is_file(path):
if not path:
return False
if not os.path.isfile(path):
return False
return True
def arg_is_file(path):
try:
if not is_file(path):
raise
... | help = ('Input sequence file(s) name '))
parser.add_argument('-o', '--out-format',
type = str,
choices = ['nex', 'fasta', 'phy'],
help = ('The format of the output sequence file(s). Valid options '))
parser.add_argument('-j', '--path-to-jModelTest',
type = str,
help=('The full path to the jModelTest execut... | -substitution-models',
type = str,
choices = ['3','5','7','11']
default = ['3']
help = ('Number of substitution schemes to test. Default is all GTR models "-s 3".'))
parser.add_argument('-g', '--gamma',
type = str,
default = ['4']
help = ('Include models with rate variation among sites and number of cate... |
# coding=utf-8
import random
lista = []
for x in range(10):
numero = random.randint(1, 100)
| if x == 0:
maior, menor = numero, numero
elif numero > maior:
maior = numero
elif numero < menor:
menor = numero
lista.append(numero)
lista.sort()
print(lista)
print("Maior: %d" % maior)
prin | t("Menor: %d" % menor)
|
# -*- coding: utf-8 -*-
# Gen | erated by Django 1.10.8 on 2018-04-26 12:20
from __fut | ure__ import unicode_literals
from django.db import migrations, models
class Migration(migrations.Migration):
dependencies = [
('codenerix_products', '0011_auto_20180202_0826'),
]
operations = [
migrations.AddField(
model_name='productunique',
name='caducity',
... |
be returned with instances where there is a significant performance
difference
"""
regression_table_data = list()
improvement_table_data = list()
full_comparison_str = str()
for workload_scale_key, workload in grouped.items():
for query_name, file_formats in workload.items():
for file_format, resu... | format = first_query_result[QUERY][TEST_VECTOR][FILE_FORMAT]
compression_codec = first_query_result[QUERY][TEST_VECTOR][COMPRESSION_CODEC]
compression_type = first_query_result[QUERY][TEST_VECTOR][COMPRESSION_TYPE]
avg_time = results[AVG]
stddev = results[STDDEV]
num_clients = results[NUM_CLIENTS]
... | TIONS]
runtime_profile = first_query_result[RUNTIME_PROFILE]
file_type_id = data_store.get_file_format_id(
file_format, compression_codec, compression_type)
if file_type_id is None:
print 'Skipping unkown file type: %s / %s' % (file_format, compression)
continue
workload_id = data_... |
# Copyright 2017 The TensorFlow Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applica... | ]))
self.assertEqual(34.0, result.numpy())
def testNetworkAsAGraph(self):
self.skipTest("TODO(ashankar,josh11b): FIX THIS")
# Verify that we're using ResourceVariables
def testNetwor | kVariablesDoNotInterfere(self):
self.skipTest("TODO: FIX THIS")
net1 = MyNetwork()
net2 = MyNetwork()
one = constant_op.constant([[1.]])
print(type(net1(one)))
net2(one)
net1.trainable_weights[0].assign(constant_op.constant([[1.]]))
net2.trainable_weights[0].assign(constant_op.constan... |
from datetime import timedelta
from requests.auth import HTTPBasicAuth
from django.core.exceptions import ValidationError
from django.utils import timezone
from django.core.cache import cache
from ..settings import (
WFRS_GATEWAY_COMPANY_ID,
WFRS_GATEWAY_ENTITY_ID,
WFRS_GATEWAY_API_HOST,
WFRS_GATEWAY_CO... | )
headers = {
"request-id": request_id,
"gateway-company-id": self.company_id,
"gateway-e | ntity-id": self.entity_id,
}
if client_request_id is not None:
headers["client-request-id"] = str(client_request_id)
# Send request
logger.info(
"Sending WFRS Gateway API request. URL=[%s], RequestID=[%s]",
url,
request_id,
)
... |
import pandas as pd
from pandas import Dat | aFrame
from matplotlib import pyplot as plt
from matplotlib import style
style.use('ggplot')
df = pd.read_csv('sp500_ohlc.csv', index_col = 'Date', parse_dates=True)
#print df.head()
df['STD'] = pd.rolling_std(df['Close'], 25, min_periods=1)
ax1 = plt.subplot(2, 1, 1)
df['Close'].plot()
plt.ylabel('Close')
# do... | TD'].plot()
plt.ylabel('Standard Deviation')
plt.show()
|
# -*- coding: utf-8 -*-
"""
************************************* | **************************************
ProcessingPlugin.py
---------------------
Date : August 2012
Copyright : (C) 2012 by Victor Olaya
Email : volayaf at gmail dot com
***************************************************************************
* ... | m is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* ... |
fro | m django.contrib import admin
import models
# Register your models here.
admin.site.register(models.UserProfile)
admin.site | .register(models.Event)
|
#!/usr/bin/python
import sys
import pyxbackup as pxb
import pytest
def test__parse_port_param():
assert(pxb._parse_port_param('27017,27019')) == True
assert(pxb.xb_opt_remote_nc_port_min) == 27017
assert(pxb.xb_opt_remote_nc_port_max) == 27019
a | ssert(pxb._parse_port_param('27017, 27019')) == True
assert(pxb._parse_port_param('abcde, 27019')) == False
assert(pxb._parse_port_param('abcde, ')) == False
assert(pxb._parse_port_param('9999, ')) == False
assert(pxb._parse_port_param('9999 ')) == False
assert(pxb._parse_port_param('9999')) == True... | 2, 13]
assert(pxb._xb_version(verstr = '2.2.13', tof = True)) == 2.2 |
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the... | , "ceph-a")
osddir = os.path.join(self.tempdir, "osd", "ceph-0")
os.makedirs(mondir)
os.makedirs(osddir)
_, version = self._exec(["ceph", "--version"], stdout=True)
version = version.decode("ascii").split()[2]
version = pkg_resources.parse_version(version)
if ve... | ailsafe_full_ratio = 1
"""
else:
extra = """
mon_allow_pool_delete = true
"""
# FIXME(sileht): check availible space on /dev/shm
# if os.path.exists("/dev/shm") and os.access('/dev/shm', os.W_OK):
# journal_path = "/dev/shm/$cluster-$id-journal"
# else:
j... |
#!/usr/bin/env python3
# ReText
# Copyright 2011-2012 Dmitry Shachnev
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
... | ut even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin | Street, Fifth Floor, Boston,
# MA 02110-1301, USA.
import sys
import signal
from ReText import *
from ReText.window import ReTextWindow
def main():
app = QApplication(sys.argv)
app.setOrganizationName("ReText project")
app.setApplicationName("ReText")
RtTranslator = QTranslator()
for path in datadirs:
if RtTr... |
THis function ...
:param ski:
:param component:
:return:
"""
# Get title
title = component.parameters.title
# Set the deprojection geometry
ski.set_stellar_component_geometry(title, component.deprojection)
# -----------------------------------------------------------------
def se... | xes are implemented at this moment")
# Check whether the title is defined
if title is None: log.warning("The title for the '" + name + "' dust component is not specified")
# Set dust component properties
properties = dict()
properties["geometry"] = geometry
properties["geometry_type"] = geomet... | properties["mix_type"] = mix_type
properties["mix_properties"] = mix_properties
properties["normalization_type"] = normalization_type
properties["normalization_properties"] = normalization_properties
properties["mix"] = mix
properties["mass"] = mass
proper |
st)
log.debug('Token request validation ok for %r.', request)
except errors.OAuth2Error as e:
log.debug('Client error during validation of %r. %r.', request, e)
return headers, e.json, e.status_code
token = token_handler.create_token(request, refresh_token=True)
... | equest.client_id, request.code, request)
return headers, json.dumps(token), 200
def validate_authorization_request(self, reque | st):
"""Check the authorization request for normal and fatal errors.
A normal error could be a missing response_type parameter or the client
attempting to access scope it is not allowed to ask authorization for.
Normal errors can safely be included in the redirection URI and
sen... |
#!/usr/bin/env python
# -*- coding: utf-8 -*-
"""
Created on Wed Jul 24 11:30:24 2013
@author: Sat Kumar Tomer
@email: satkumartomer@gmail.com
@website: www.ambhas.com
"""
import numpy as np
import h5py
import os
import datetime as dt
def extract_smc(h5_file, lat, lon):
"""
Extract Soil Moisture Content fro... | lat = 12
lat = [10,15]
lon: longitude, either a single value or min,max limits
eg. as for lat
| """
res = 0.1
######### convert lat, lon into indices ##############
# min max are given
min_max = type(lat) is list
if min_max:
lat_min = lat[0]
lat_max = lat[1]
i_lat_min = int(np.floor((90-lat_min)/res))
i_lat_max = int(np.floor((90-lat_max)/res))
lo... |
# Copyright 2016, IBM US, Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing... | e_command(" ".join(cmd_parms))
if rc != 0:
logging.warning("%s::ipmi query failed with output %s", _method_, stderr)
raise exceptions.DeviceException("ipmi query failed with output %s" % stderr)
for line in stdout:
if "Firmware Revision" in line:
self.... | ude_name=["self"])
def get_architecture(self):
return None
@entry_exit(exclude_index=[0, 1], exclude_name=["self", "new_password"])
def change_device_password(self, new_password):
"""Update the password of the ipmi default user on the BMC of the openpower server.
"""
_method... |
import os
PROJECT_ROOT = os.path.abspath(os.path.dirname(__file__))
TEST_ROOT = os.path.join(os.path.dirname(PROJECT_ROOT), "tests")
SINGLE_ORCA_RUN_FILE = os.path.join(PROJECT_ROOT, "code", "single_core_run_orca.py")
SINGLE_RUN_MOB_KMC_FILE = os.path.joi | n(
PROJECT_ROOT, "code", "single_core_run_mob_KMC.py"
)
SINGLE_RUN_DEVICE_KMC_FILE = os | .path.join(
PROJECT_ROOT, "code", "single_core_run_device_KMC.py"
)
|
obj.stance),
"orientation": packets.Container(yaw=b_obj.yaw, pitch=b_obj.pitch),
"grounded": packets.Container(grounded=b_obj.on_ground)})
def send_action(self, b_obj):
"""
sneaking, not sneaking, leave bed, start sprinting, stop sprinting
"""
if b_obj.action... | obj.velocities.y) < 0.005: # minecraft value
b_obj.velocities.y = 0
if abs(b_obj.velocities.z) < 0.005: # minecraft value
b_obj.velocities.z = 0
def clip_ladder_velocities(self, b_obj):
if self.is_on_ladder(b_obj):
if b_obj.velocities.y < -0.15:
... | b_obj.velocities.x = math.copysign(0.15, b_obj.velocities.x)
if abs(b_obj.velocities.z) > 0.15:
b_obj.velocities.z = math.copysign(0.15, b_obj.velocities.z)
if self.is_sneaking(b_obj) and b_obj.velocities.y < 0:
b_obj.velocities.y = 0
def handle_water_movement(se... |
import Deci | mal_pb2
import Log_pb2
import uRPC_pb2
import client
import s | erver |
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
"""
Test cases for the TAAR Hybrid recommender
"""
from taar.recommenders.hybrid_recommender import CuratedRecommender
... | r.can_recommend({"installed_addons": []})
@mock_s3
def test_curated_recommendations(test_ctx):
ctx = install_mo | ck_curated_data(test_ctx)
r = CuratedRecommender(ctx)
# CuratedRecommender will always recommend something no matter
# what
for LIMIT in range(1, 5):
guid_list = r.recommend({"client_id": "000000"}, limit=LIMIT)
# The curated recommendations should always return with some kind
... |
import unittest
import os
from flow.benchmarks.baselines.bottleneck0 import bottleneck0_baseline
from flow.benchmarks.baselines.bottleneck1 import bottleneck1_baseline |
from flow.benchmarks.baselines.bottleneck2 import bottleneck2_baseline
from flow.benchmarks.baselines.figureeight012 import figure_eight_baseline
from flow.benchmarks.baselines.grid0 import grid0_baseline
from flow.benchmarks.baselines.grid1 import grid1_baseline
| from flow.benchmarks.baselines.merge012 import merge_baseline
os.environ["TEST_FLAG"] = "True"
class TestBaselines(unittest.TestCase):
"""
Tests that the baselines in the benchmarks folder are running and
returning expected values (i.e. values that match those in the CoRL paper
reported on the websit... |
# -*- coding: utf-8 -*-
from __future__ import unicode_literals
from django.db import migrations, models
from django.conf import settings
class Migration(migrations.Migration):
dependencies = [
migrations.swappable_dependency(settings.AUTH_USER_MODEL),
('api', '0009_dummyprovider'),
]
o... | ls.DateTimeField(auto_now=True)),
('name', models.CharField(max_length=1024)),
('template_name', models.CharField(max_length=1024)),
],
options={
'abstract': False,
},
),
| migrations.CreateModel(
name='ExternalJobPortalFormGroup',
fields=[
('id', models.AutoField(verbose_name='ID', serialize=False, auto_created=True, primary_key=True)),
('created_at', models.DateTimeField(auto_now_add=True)),
('modified_at', models... |
#Equals and hash
class Eq(object):
def __init__(self, data):
self.data = data
def __eq__(self, other):
return self.data == other.data
class Ne(object):
def __init__(self, data):
self.data = data
def __ne__(self, other):
return self.data != other.data
class Hash(obj... | .data = data
def __hash__(self):
re | turn hash(self.data)
class Unhashable1(object):
__hash__ = None
class EqOK1(Unhashable1):
def __eq__(self, other):
return False
def __ne__(self, other):
return True
class Unhashable2(object):
#Not the idiomatic way of doing it, but not uncommon either
... |
# -*- coding: utf-8 -*-
# #
# #
## This file is part of Indico.
## Copyright (C) 2002 - 2014 European Organization for Nuclear Research (CERN).
##
## Indico is free software; you can redistribute it and/or
## modify it under the terms of the GNU General Public License as
## published by the Free Software Foundation; ei... | ndler=LogRecordStreamHandler, traceback_frames=1):
SocketServer.ThreadingTCPServer.__init__(self, (host, port), handler)
self.timeout = 1
self.traceback_frames = traceback_frames
def terminal_size():
h, w, hp, | wp = struct.unpack('HHHH', fcntl.ioctl(0, termios.TIOCGWINSZ, struct.pack('HHHH', 0, 0, 0, 0)))
return w, h
def print_linesep():
print terminal_size()[0] * u'\N{BOX DRAWINGS LIGHT HORIZONTAL}'
def indent(msg, level=4):
indentation = level * ' '
return indentation + msg.replace('\n', '\n' + indentati... |
res.
EXC_PATCH = "pyvtk580_tryexcept_and_pyexceptions.diff"
# fixes attributes in vtkproperty for shader use in python
VTKPRPRTY_PATCH = "vtkProperty_PyShaderVar.diff"
# recent segfault with vtk 5.6.1 and wxPython 2.8.11.0
# see here for more info:
# http://vtk.1045678.n5.nabble.com/wx-python-scripts-segfault-td12344... | VTKPRPRTY_PATCH)
self.wxvtkrwi_displayid_segfault_patch_filename = os.path.join(
config.patches_dir,
WXVTKRWI_DISPLAYID_SEGFAULT_PATCH)
config.VTK_LIB = os.path.join(self.inst_dir, 'lib')
# whatever the case may be... | config.VTK_SODIR = os.path.join(self.inst_dir, 'bin')
# inst/VTK/lib/site-packages the VTK python package
config.VTK_PYTHON = os.path.join(
config.VTK_LIB, 'site-packages')
else:
# on *ix, inst/VTK/lib contains DLLs
config.VTK_SODIR =... |
# Copyright 2015, 2018 IBM Corp.
#
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless require... | , None, None)
self.assertRaises(exception.InvalidDevicePath, mgmt.remove_block_dev,
link)
# stat was called once; exec was not called
self.assertEqual(1, mock_stat.call_count)
self.assertEqual(0, mock_writefile.call_count)
# Delete special file not foun... | mock_stat.side_effect = (None, OSError(), None)
self.assertRaises(exception.InvalidDevicePath, mgmt.remove_block_dev,
link)
# stat was called twice; exec was not called
self.assertEqual(2, mock_stat.call_count)
self.assertEqual(0, mock_writefile.call_cou... |
# This file is formatted with black.
# https://github.com/psf/black
import os
import json
import subprocess
import sys
import simplekml
ALT_MODE = simplekml.AltitudeMode.absolute # Absolute altitude means from sea floor
# Current commit
if os.environ.get("TRAVIS"):
COMMIT = os.environ["TRAVIS_COMMIT"]
else:
... | esc += f"IPv4: {node.get('ipv4')}<br>"
desc += f"IPv6: {node.get('ipv6')}<br>"
desc += f"Mode: {node.get('mode')}<br>"
if node["type"] != "router":
desc += f"Connected Router: {node.get('router')}<br>"
# Antenna specific keys
if node["type"] == "antenna":
desc += f"SSID: {node.get('... | += f"Antenna Type: {node.get('antennaType')}<br>"
desc += f"Antenna Cone: {node.get('antennaCone')}<br>"
desc += f"Antenna Direction: {node.get('antennaDirection')}<br>"
desc += f"Antenna Distance: {node.get('antennaDistance')}<br>"
desc += f"Antenna Protocol: {node.get('antennaProtocol... |
#! /usr/bin/python
import sys, localconfig, platform, time
#OS Runtime comments
if platform.system() == "Windows":
sys.path.append(localconfig.winpath)
print "You | are running the AnkitBot UAA Module for Windows. Sponsored by DQ. :)"
else:
sys.path.append(localconfig.linuxpath)
print "You are running the AnkitBot UAA Module for Linux. Sponsored by DQ. :)"
import wikipedia
import globalfunc as globe
override = False
if not globe.startAllowed(override):
pri... | |
from unittest import TestCase
from django.template import Context | , Template, VariableNode
from django.test import override_settings
class NodelistTest(TestCase):
def test_for(self):
template = Template('{% for i in 1 %}{{ a }}{% endfor %}')
vars = template.nodelist.get_nodes_by_type(VariableNode)
| self.assertEqual(len(vars), 1)
def test_if(self):
template = Template('{% if x %}{{ a }}{% endif %}')
vars = template.nodelist.get_nodes_by_type(VariableNode)
self.assertEqual(len(vars), 1)
def test_ifequal(self):
template = Template('{% ifequal x y %}{{ a }}{% endifequal %... |
"""Test cases for STEREO Map subclasses.
This particular test file pertains to CORMap.
@Author: Pritish C. (VaticanCameos)
"""
import os
import glob
from sunpy.map.sources.stereo import CORMap
from sunpy.map import Map
import sunpy.data.test
path = sunpy.data.test.rootdir
fitspath = glob.glob(os.path.join(path, "cor... | Map(fitspath)
# COR Tests
def test_fitstoEIT():
"""Tests the creation of CORMap using FITS."""
assert isinstance(cor, CORMap)
def test_is_datasource_for():
"""Test the is_datasource_for method of CORMap.
Note that header data to be provided as an argument
can be a MapMeta object."""
assert cor... | or.data, cor.meta)
def test_measurement():
"""Tests the measurement property of the CORMap object."""
assert cor.measurement == "white-light"
def test_observatory():
"""Tests the observatory property of the CORMap object."""
assert cor.observatory == "STEREO A"
|
g'):
match = re.match(r'\\g<(\S+)>', arg).group(1)
groups.append(match)
elif arg.startswith('\\'):
match = int(re.match(r'\\(\d+)', arg).group(1))
groups.append(match)
else:
raise errors.AnsibleFilterError('Unknown argument')
flags = 0
... | tionary")
rc = item.get('rc', 0)
failed = item.get('failed', False)
if rc != 0 or failed:
return True
else:
return False
def success(*a, **kw):
''' Test if task result yields success '''
return not failed(*a, **kw)
def changed(*a, **kw):
''' Test if task result yields chang... | ot isinstance(item, MutableMapping):
raise errors.AnsibleFilterError("|changed expects a dictionary")
if not 'changed' in item:
changed = False
if ('results' in item # some modules return a 'results' key
and isinstance(item['results'], MutableSequence)
and ... |
from sa_tools.base.magic import MagicMixin
from sa_tools.inbox import Inbox
from sa_tools.session import SASession
from sa_tools.index import Index
import os
import pickle
import sys
def py_ver() -> str:
return str(sys.version_info.major)
class APSession(object):
def __init__(self, username: str, passwd: s... | s):
self. | username = username
self.passwd = passwd
self._session_bak = \
'.' + username.replace(' ', '_') + py_ver() + '.bak'
self.session = self._get_session(save_session=save_session)
del passwd
del self.passwd
def _get_session(self, save_session: bool=True) -> SASessio... |
# Authors: Aaron Qiu <zqiu@ulg.ac.be>,
# Antonio Sutera <a.sutera@ulg.ac.be>,
# Arnaud Joly <a.joly@ulg.ac.be>,
# Gilles Louppe <g.louppe@ulg.ac.be>,
# Vincent Francois <v.francois@ulg.ac.be>
#
# License: BSD 3 clause
from __future__ import division, print_function, absolute_import
... |
from utils import scale
def _partition_X(X, n_jobs):
"""Private function used to partition X between jobs."""
n_nodes = X.shape[1]
# Compute the number of jobs
| n_jobs = min(cpu_count() if n_jobs == -1 else n_jobs, n_nodes)
# Partition estimators between jobs
n_node_per_job = (n_nodes // n_jobs) * np.ones(n_jobs, dtype=np.int)
n_node_per_job[:n_nodes % n_jobs] += 1
starts = np.cumsum(n_node_per_job)
return n_jobs, [0] + starts.tolist()
def _parallel_... |
# Copyright 2011 Kyriakos Zarifis
# Copyright 2008 (C) Nicira, Inc.
#
# This file is part of POX.
#
# POX is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) ... | fid)
else:
| # We know the outport, set up a flow
log.info('installing flow for ' + str(packet))
match = ofcommand.extractMatch(packet)
actions = [ofcommand.Output(prt[0])]
ofcommand.addFlowEntry(con, inport, match, actions, bufid)
# Separate bufid, make addFlowEntry() only ADD the entry
... |
import _plotly_utils.basevalidators
class DeltaValidator(_plotly_utils.basevalidators.CompoundValidator):
def __init__(self, plotly_name="delta", parent_name="indicator", **kwargs):
super(DeltaValidator, self).__init__(
plotly_name=plotly_name,
parent_name=parent_name,
... | default, it is set to the current value.
relative
Show relative change
valueformat
Sets the value formatting rule using d3
formatting mini-language whi | ch is similar to
those of Python. See
https://github.com/d3/d3-3.x-api-
reference/blob/master/Formatting.md#d3_format
""",
),
**kwargs
)
|
# -*- coding: utf-8 -*-
# Generated by Django 1.10.8 on 2018-11-06 11:00
from __future__ import unicode_literals
from django.db import migrations, models
class Mig | ration(migrations.Migration):
dependencies = [
('rdrf', '0081_clinicaldata_active'),
| ]
operations = [
migrations.AlterField(
model_name='surveyrequest',
name='survey_name',
field=models.CharField(max_length=80),
),
]
|
import os
import chardet
from humanfriendly import format_size
import pygments
import pygments.lexers
import pygments.lexers.special
import pygments.formatters
from pygments.util import ClassNotFound
from mako.lookup import TemplateLookup
from mfr.core import extension
from mfr.extensions.codepygments import settings... | encoding = detected_encoding.get('encoding', None)
if encoding is None:
raise exceptions.FileDecodingError(
| message='Unable to detect encoding of source file.',
extension=ext,
category='undetectable_encoding',
code=400,
)
try:
content = data.decode(encoding)
except UnicodeDecodeError as err:
... |
impo | rt sys
from math import ceil
def main():
AREA = 1.76
w = float(input())
h = float(input())
print(ceil(w * h / AREA))
if __name__ == "__main__":
sys.exit(int(main() | or 0)) |
#!/usr/bin/env python
import json
import sys
import argparse
from clingo import Control, Number
class App:
def __init__(self, args):
self.control = Control()
self.args = args
self.horizon = 0
self.objects = 0
self.end = None
def show(self, model):
if not s... | > 1:
self.control = Cont | rol()
for source in self.args.file: self.control.load(source)
for i in range(0, self.objects): parts.append(("object", [Number(i + 1, count)]))
for i in range(0, self.horizon): parts.append(("horizon", [Number(i + 1, count)]))
if self.args.scratch or count == 1:
... |
# -*- coding: utf-8 -*-
#
# This file is part of INSPIRE.
# Copyright (C) 2014-2017 CERN.
#
# INSPIRE is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any ... | ANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public Lic | ense for more details.
#
# You should have received a copy of the GNU General Public License
# along with INSPIRE. If not, see <http://www.gnu.org/licenses/>.
#
# In applying this license, CERN does not waive the privileges and immunities
# granted to it by virtue of its status as an Intergovernmental Organization
# or... |
"""
Django settings for detest project.
For more information on this file, see
https://docs.djangoproject.com/en/1.7/topics/settings/
For the full list of settings and their values, see
https://docs.djangoproject.com/en/1.7/ref/settings/
"""
# Build paths inside the project like this: os.path.join(BASE_DIR, ...)
imp... | b/%Y %H:%M:%S"
},
'simple': {
'format': '%(levelname)s %(message)s'
},
},
'loggers': {
'django': {
'handlers': ['console'],
'level': 'DEBUG',
},
'detest': {
'handlers': ['console'],
'level': 'DEBUG', |
},
'detest_ui': {
'handlers': ['console'],
'level': 'DEBUG',
},
},
}
LOGGING = {}
|
from application import CONFIG, app
from .models import *
from flask import current_app, session
from flask.ext.login import login_user, logout_user, current_user
from flask.ext.principal import Principal, Identity, AnonymousIdentity, identity_changed, identity_loaded, RoleNeed
import bcrypt
import re
import sendgrid
i... | y, None)
identity_changed.send(current_app._get_current_object(), identity = AnonymousIdentity())
def tokenize_email(email):
return ts.dumps(email, salt = CONFIG["EMAIL_TOKENIZER_SALT"])
def detokenize_email(token):
return ts.loads(token, salt = CONFIG["EMAIL_TOKENIZER_SALT"], max_age = 86400)
def send_recover... |
message.set_from("noreply@hackbca.com")
message.set_subject("hackBCA III - Account Recovery")
message.set_html("<p></p>")
message.add_filter("templates", "enable", "1")
message.add_filter("templates", "template_id", CONFIG["SENDGRID_ACCOUNT_RECOVERY_TEMPLATE"])
message.add_substitution("prefix", "staff")
... |
from django.apps import AppConfig
class UserregistrationConfig(AppConfig):
nam | e = 'userregistration' | |
import utils
from flask import render_template, redirect, request, session, url_for, json, jsonify
from . import murmurbp
from .User import User
# User Views
@murmurbp.route("/users", methods = ['GET'])
def get_all_users():
u = User()
ul = utils.obj_to_dict(u.get_all())
data = [{'UserId': k, 'UserName': v... | nel()
cl = utils.obj_to_dict(c.get_all())
data = [ v for k, v in cl.iteritems()]
resp = jsonify(channels=data)
return resp, 20 | 0
@murmurbp.route("/channels", methods = ['POST'])
def add_channel():
c = Channel()
name = request.form['channelName']
parent = request.form['parent']
new_channel = c.add_channel(name, parent)
data = utils.obj_to_dict(new_channel)
resp = jsonify(data)
return resp, 200
@murmurbp.route("/cha... |
#
# This file is part of TSmells
#
# TSmells is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the
# Free Software Foundation; either version 2 of the License, or (at your
# option) any later version.
#
# TSmells is distributed in the hope ... | ss.ui import Dockable
class TDockable(JPanel, Dockable):
#
# Implementation of Dockable interface
#
def mouseEnterEdge(self, edge):
pass
def mouseLeaveNode(self, node):
pass
def mouseLeaveEdge(self, edge):
pass
def getPreferredSize(self):
return Dimensio... | ):
''' prefer vertical orientation '''
return 2 # vertical, see com.hp.hpl.guess.ui.MainUIWindow.java
def opening(self, state):
self.visible = state
def attaching(self, state):
pass
def getTitle(self):
return("")
def getWindow(self):
return self.myPare... |
##############################################################################
# Copyright (c) 2013-2017, Lawrence Livermore National Security, LLC.
# Produced at the Lawrence Livermore National Laboratory.
#
# This file is part of Spack.
# Created by Todd Gamblin, tgamblin@llnl.gov, All rights reserved.
# LLNL-CODE-64... | 330, Boston, MA 02111-1307 USA
##############################################################################
from spack import *
class PyWrapt(PythonPackage):
"""Module for decorators, wrappers and monkey patching."""
homepage = "https:// | github.com/GrahamDumpleton/wrapt"
url = "https://pypi.io/packages/source/w/wrapt/wrapt-1.10.10.tar.gz"
version('1.10.10', '97365e906afa8b431f266866ec4e2e18')
|
#encoding: utf-8
from __future__ import unicode_literals
TITLE_TO_SLUG = {
'איגוד הביטקוין': 'bitcoin-org-il',
'אליאב': 'eliav',
'* בדיקות פרודקשיין *': 'production-test',
'בי״ס עמית': 'amit',
'הבר קיימא': 'barkayma',
'הסדנא לידע ציבורי': 'hasadna',
'הפורום לממשל פתוח': 'open-government',
'התנועה לאיכות השל | טון': 'mqg',
'מעיין ברוך': 'maayan-baruch',
'מרצ': 'meretz',
'נטף': 'nataf', |
'נען': 'naan',
'קהילה פתוחה': 'open-community',
}
|
#!/usr/bin/env python2.7
import numpy as np
import matplotlib.pyplot as plt
Freq=np.array([30,40,45,50,53,55,60,65,70,80,90,95,98,100,110,120])
Db=np.a | rray([70.5,78.6,83.2,88.4,87.5,86.7,85.2,83.9,85.1,88,95.7,100.4,100.4,99.2,94.7,94.9])
plt.xlabel('Frecuencia')
plt.ylabel('Decibel')
plt.title('DecibelvsFreq a 0.1volts')
#for i in range(len(Freq)):
# plt.text(Freq[i],Db[i], r'$Freq=%f, \ Db=%f$' % (Freq[i], Db[i]))
plt.axis([0, 330, 50, 130])
plt.plot(Freq,Db,'bo',... | k')
plt.grid(True)
plt.show()
|
#import os
import pickle
import glob
#import numpy as np
from tqdm import tqdm
import matplotlib.pyplot as plt
#from data_control_no_images.read import R | ead
listing = glob.glob('F:/Project_Cars_Data/1lap-fullspeed/Watkins Glen International - Short Circuit' + '/*.pkl')
x = []
y = []
throttle = []
raw_throttle = []
brake = []
raw_brake = []
steering = []
raw_steering = []
xy = []
for filen | ame in tqdm(listing):
with open(filename, 'rb') as file_data:
project_cars_state = pickle.load(file_data)
controller_state = pickle.load(file_data)
#remove none flying lap data
if project_cars_state.mParticipantInfo[0].mCurrentLapDistance == 0.0:
continue
p... |
is
#* scikit-beam - data analysis tools for X-ray science
# - https://github.com/scikit-beam/scikit-beam
#* xray-vision - plotting helper functions for X-ray science
# - https://github.com/Nikea/xray-vision
import xray_vision
import matplotlib.cm as mcm
import copy
import xray_vision.mpl_plotting as mpl_plot... | ey', 'seagreen',
'silver', 'darkmagenta', 'darkslategrey', 'darkgoldenrod', 'rosybrown',
'goldenrod', 'darkturquoise', 'plum',
'purple', 'olive', 'gold','powderblue', 'peachpuff','violet', 'lime', 'greenyellow', 'tan', 'skyblue',
'magenta', 'blac... | markers )
import matplotlib as mpl
# Custom colormaps
################################################################################
# ROYGBVR but with Cyan-Blue instead of Blue
color_list_cyclic_spectrum = [
[ 1.0, 0.0, 0.0 ],
[ 1.0, 165.0/255.0, 0.0 ],
[ 1.0, 1.0, 0.0 ],
[ 0.0, ... |
#!/usr/bin/env python
import sys,re,time,argparse
def main(args):
# print >>sys.stdout, "Start analysis: " + time.strftime("%a,%d %b %Y %H:%M:%S")
convert(args.input,args.output)
# print >>sys.stdout, "Finish analysis: " + time.strftime("%a,%d %b %Y %H:%M:%S")
def extract_exon_length_from_cigar(cigar):
cigar_m = ["... | ent
7. MAPQ
8. Number of nucleotides that are softly-clipped by aligner; left_right
9. exon count
10. exon start set
11. exon end set'''
parser = argparse.ArgumentParser(description="Function: convert sam to gpd.",formatter_class=argparse.ArgumentDefaultsHelpFormatter)
parser.add_argument('-i','--in | put',type=argparse.FileType('r'),required=True,help="Input: sam file")
parser.add_argument('-o','--output',type=argparse.FileType('w'),required=True,help="Output: gpd file")
args = parser.parse_args()
return args
if __name__=="__main__":
args = do_inputs()
main(args)
|
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301, USA.
#
#
"""
Methods to calculate ECP values (Endogenous Competition Potential)
"""
########################################################
#~ Import libraries.
########################################################
from cellery i... | d])
#--------------------------
#~ Run in parallel.
aECPVlsAVlsB = zeros((l | enaMrnVlsDtA,lenaMrnVlsDtB),dtype=float32)
aECPVlsAVlsB.fill(nan)#fill all ECP with nan to start
qInJobs = Queue()
qOutRslts = Queue()
cntVlABPrs=0
for intrvlA,intrvB in product(intrvlsMrnVlsA,intrvlsMrnVlsB):
qInJobs.put((intrvlA,intrvB))
cntVlABPrs += 1
for t in xrange(nThrds):
Process(target = mltECPcl... |
#!/usr/bin/env python
"""
Copyright (c) 2019 Alex Forencich
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merg... | _ts_step,
output_pps=output_pps
)
@always(delay(3200))
def clkgen():
clk.next = not clk
input_clk.next = not input_clk
outpu | t_clk_hp = Signal(int(3200))
@instance
def clkgen_output():
while True:
yield delay(int(output_clk_hp))
output_clk.next = not output_clk
@always(delay(5000))
def clkgen_sample():
sample_clk.next = not sample_clk
@instance
def check():
yield dela... |
# -*- coding: utf-8 -*-
# Generated by Django 1.9.1 on 2016-01-19 06:49
from __future__ import unicode_literals
from django.db import migrations, models
class Migration(migrations.Migration):
dependencies = [
('condensed_urls', '0001_initial'),
]
operations = | [
migrations.AddField(
| model_name='condensedurl',
name='visited_count',
field=models.IntegerField(default=0),
),
]
|
# Copyright 2017 Huawei Technologies Co.,LTD.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unl... | ities to a list of formal objects."""
objs = []
for db_obj in db_objs:
objs.append(cls._from_db_object(cls(context), db_obj))
retu | rn objs
class CyborgObjectSerializer(object_base.VersionedObjectSerializer):
# Base class to use for object hydration
OBJ_BASE_CLASS = CyborgObject
CyborgObjectDictCompat = object_base.VersionedObjectDictCompat
class CyborgPersistentObject(object):
"""Mixin class for Persistent objects.
This adds... |
#
# Gramps - a GTK+/GNOME based genealogy program
#
# Copyright (C) 2010 Nick Hall
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; e | ither version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
#... | ; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
#
"""
Tag editing module for Gramps.
"""
#-------------------------------------------------------------------------
#
# GNOME modules
#
#-----------------------------------------------------------------... |
00)
s = pd.Series(arr)
df = tm.makeDataFrame()
class TestTopper(TestCase):
def __init__(self, *args, **kwargs):
TestCase.__init__(self, *args, **kwargs)
def runTest(self):
pass
def setUp(self):
pass
def test_topn_largest(self):
# get the n largest
bn_res = to... | .assert_almost_equal(bn_res, arg_res)
# get the nsmallest
bn_res = topper.bn_topn(arr, -10)
bn_args = topper.bn_topargn(arr, -10)
arg_res = arr[bn_args]
tm.assert_almost_equal(bn_res, arg_res)
# get the nsmallest
bn_res = topper.bn_topn(arr, -10, | ascending=False)
bn_args = topper.bn_topargn(arr, -10, ascending=False)
arg_res = arr[bn_args]
tm.assert_almost_equal(bn_res, arg_res)
def test_nans(self):
"""
bottleneck.partsort doesn't handle nans. We need to correct for them.
the arg version is trickiers since w... |
from flask import render_template, redirect, request, url_for, flash
from flask_login import login_user, logout_user, login_required, \
current_user
from . import auth
from .. import db
from ..models import User
from ..email import send_email
from .forms import LoginForm, RegistrationForm, ChangePasswordForm,\
... | 'A confirmation email has been sent to you by email.')
return redirect(url_for('auth.login'))
return render_template('auth/register.html', form=form)
@auth.route('/confirm/<token>')
@login_required
def confirm(token):
if current_user.confirmed:
return redirect(url_for('main.index'))
if cur... | on link is invalid or has expired.')
return redirect(url_for('main.index'))
@auth.route('/confirm')
@login_required
def resend_confirmation():
token = current_user.generate_confirmation_token()
send_email(current_user.email, 'Confirm Your Account',
'auth/email/confirm', user=current_user, t... |
#!/usr/bin/python
import sys
from LAPS.MsgBus.Bus import Bus
# Create queue with a unique name
# insert message
# receive msg
# delete queue
if __name__ == "__main__":
# If invoked directly, parse command line arguments for logger information
# | and pass the rest to the run() method defined above
# --------------------------------------------------------------------------
try:
unique_queue_name = sys.argv[1]
except:
print "Not enough command line arguments: this test needs a unique queue name"
exit(1)
#msgbus = Bus... | , address=unique_queue_name)
#parset = """
#key=value
#"""
#msgbus.send(parset,"Observation123456") |
ion = option[:-1]
value = getattr(self, option)
print indent + "%s = %s" % (option, value)
def run (self):
"""A command's raison d'etre: carry out the action it exists to
perform, controlled by the options initialized in
'initialize_options()', customized by other c... | lf._ensure_stringlike(option, | what, default)
if val is not None and not tester(val):
raise DistutilsOptionError, \
("error in '%s' option: " + error_fmt) % (option, val)
def ensure_filename (self, option):
"""Ensure that 'option' is the name of an existing file."""
self._ensure_tested_stri... |
#!/usr/bin/env python
# encoding: utf-8
# Thomas Nagy, 2005-2010 (ita)
"""
ConfigSet: a special dict
The values put in :py:class:`ConfigSet` must be lists
"""
import copy, re, os
from waflib import Logs, Utils
re_imp = re.compile('^(#)*?([^#=]*?)\ =\ (.*?)$', re.M)
class ConfigSet(object):
"""
A dict that honor ... | ::
from waflib.ConfigSet import ConfigSet
env = ConfigSet()
env.a | ppend_value('CFLAGS', ['-O2'])
child = env.derive()
child.CFLAGS.append('test') # warning! this will modify 'env'
child.CFLAGS = ['-O3'] # new list, ok
child.append_value('CFLAGS', ['-O3']) # ok
Use :py:func:`ConfigSet.detach` to detach the child from the parent.
"""
newenv = ConfigSet()
newenv.par... |
# Copyright 2014 The Chromium Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
from telemetry import test
from measurements import smoothness
import page_sets
@test.Disabled('linux') # crbug.com/368767
class SchedulerToughSchedulingC... | ness
page_set = page_sets.ToughSchedulingCasesPageSet
# Pepper plugin is not supported on android.
@test.Disabled('android', 'win') # crbug.com/384733
class SchedulerToughPepperCases(test.Test):
"""Measures rendering statistics while interacting with pages that have
pepper plugins"""
test = smoothness.Smooth... | _set = page_sets.ToughPepperCasesPageSet
def CustomizeBrowserOptions(self, options):
# This is needed for testing pepper plugin.
options.AppendExtraBrowserArgs('--enable-pepper-testing')
|
import numpy as np
import pylab as pl
import sys
sys.path.append('../../lablib')
import ourgui
def smoothList(list,strippedXs=False,degree=10):
if strippedXs==True: return Xs[0:-(len(list)-(len(list)-degree+1))]
smoothed=[0]*(len(list)-degree+ | 1)
for i in range(len(smoothed)):
smoothed[i]=sum(list[i:i+degree])/float(degree)
return smoothed
def smoothListGaussian(list,strippedXs=False,degree=5):
window=degree*2-1
weight=np.array([1 | .0]*window)
weightGauss=[]
for i in range(window):
i=i-degree+1
frac=i/float(window)
gauss=1/(np.exp((4*(frac))**2))
weightGauss.append(gauss)
weight=np.array(weightGauss)*weight
smoothed=[0.0]*(len(list)-window)
for i in range(len(smoothed)):
smooth... |
reating a new hash.
Typically this option is not needed, as the default (``"2a"``) is usually the correct choice.
If specified, it must be one of the following:
* ``"2"`` - the first revision of BCrypt, which suffers from a minor security flaw and is generally not used anymore.
* ``"2a"... | if ident == IDENT_2Y:
ident = IDENT_2A
else:
assert ident != IDENT_2X
config = u("%s%02d$%s") % (ident, self.rounds, self.salt)
return uascii_to_str(config)
#===================================================================
# specialized salt generation... | =======
@classmethod
def _bind_needs_update(cls, **settings):
return cls._needs_update
@classmethod
def _needs_update(cls, hash, secret):
if isinstance(hash, bytes):
hash = hash.decode("ascii")
# check for incorrect padding bits (passlib issue 25)
if hash.st... |
import collections
import jinja2
import requests
from flask import (
current_app,
Blueprint,
render_template,
request,
jsonify,
abort
)
frontend = Blueprint('frontend', __name__, template_folder='templates')
headers = {"Content-type": "application/json"}
@jinja2.contextfilter
@frontend.app_t... | quest.args.get('query', '')
page = request.args.get('page', 0)
premises_url = current_app.config['PREMISES_REGISTER']
url = "%s/search?_query=%s&_page=%s&_representation=json" % (premises_url, query, page)
resp = requests.get(url, headers=headers)
if resp.sta | tus_code != 200:
abort(resp.status_code)
current_app.logger.info(resp.json())
return jsonify(resp.json())
@frontend.route('/premises/<int:id>')
def premises(id):
premises_register = current_app.config['PREMISES_REGISTER']
poao_premises_register = current_app.config['POAO_PREMISES_REGISTER']
... |
from math import log10, floor
# N = 12
N = 101
# N = 1000001
def n_squares(n):
return [i**2 for i in range(2, n)]
# print(n_squares(11))
# print(n_squares(100))
##### This block from stackoverflow:
# https://stackoverflow.com/questions/37023774/all-ways-to-partition-a-string
import itertools
memo = {}
def mu... | 3, 4]]))
# print(list_sum([[1], [2], [3], [4]]))
def is_s_num(num):
sqrt = num**0.5
for part in allPartitions([int(i) for i in str(num)]):
if sqrt == list_sum(part):
return True
return False
# print(81, is_s_num(81))
# print(64, is_s_num(64))
# print(8281, is_s_num(8281))
# print(9801,... | N):
squares = n_squares(N)
sum = 0
for n in squares:
if is_s_num(n):
print(n, "is true")
sum += n
return sum
print(T(N))
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.