PhyCAD-Bench / tasks /020 /setup.json
OrlaLabs's picture
Add PhyCAD-Bench benchmark
99510bd verified
Raw History Blame Contribute Delete
842 Bytes
{
"engine": "Project Chrono / PyChrono",
"engine_version": "9.0.1",
"experiment": "CAD-derived connecting rod in a driven slider-crank under axial load",
"material_density_kg_m3": 7800.0,
"crank_throw_m": 0.05,
"initial_crank_angle_deg": 30.0,
"crank_speed_rad_s": 2.0,
"slider_axial_resistance_N": 100.0,
"reaction_smoothing_s": 0.02,
"required_relative_side_load_reduction": 0.25,
"minimum_baseline_side_load_N": 50.0,
"minimum_slider_travel_m": 0.08,
"maximum_stroke_difference_m": 0.002,
"minimum_motor_rotation_rad": 1.9,
"maximum_motor_rotation_rad": 2.02,
"maximum_joint_closure_error_m": 0.00005,
"duration_s": 1.0,
"time_step_s": 0.00025,
"maximum_relative_mass_change": 1e-6,
"maximum_envelope_change_mm": 1e-6,
"maximum_first_bore_shift_mm": 1e-6,
"maximum_bore_intrusion_mm3": 0.0001
}