Download tasks/026/setup.json from OrlaLabs/PhyCAD-Bench: direct link, hf CLI and curl.
- Browser
- Download file 941 Bytes
-
https://huggingface.co/datasets/OrlaLabs/PhyCAD-Bench/resolve/main/tasks/026/setup.json
- Command line
-
hf download hf://datasets/OrlaLabs/PhyCAD-Bench/tasks/026/setup.json
-
curl -L -o setup.json https://huggingface.co/datasets/OrlaLabs/PhyCAD-Bench/resolve/main/tasks/026/setup.json
941 Bytes
| { | |
| "engine": "Project Chrono / PyChrono", | |
| "engine_version": "9.0.1", | |
| "experiment": "Compliant tooth contact under prescribed 2:1 gear motion", | |
| "material_density_kg_m3": 7800.0, | |
| "pinion_speed_rad_s": 4.0, | |
| "mating_gear_mass_kg": 1.5, | |
| "center_distance_m": 0.135, | |
| "output_load_torque_N_m": 0.02, | |
| "contact_friction": 0.2, | |
| "contact_stiffness_N_m": 1000000.0, | |
| "contact_damping_N_s_m": 100.0, | |
| "duration_s": 3.0, | |
| "startup_exclusion_s": 0.5, | |
| "time_step_s": 0.0002, | |
| "minimum_baseline_torque_ripple_N_m": 1.0, | |
| "required_relative_torque_ripple_reduction": 0.12, | |
| "minimum_contact_fraction": 0.75, | |
| "maximum_output_speed_error_rad_s": 0.001, | |
| "minimum_tooth_tip_width_mm": 3.5, | |
| "maximum_relative_mass_change": 1e-6, | |
| "maximum_tip_radius_change_mm": 0.01, | |
| "maximum_thickness_change_mm": 0.000001, | |
| "maximum_core_missing_mm3": 0.0001, | |
| "maximum_bore_intrusion_mm3": 0.0001, | |
| "maximum_envelope_excess_mm3": 0.0001 | |
| } | |