iq array 2D | Prompt stringlengths 71 162 | qa stringlengths 64 126 | center_frequency stringclasses 1
value | bandwidth stringclasses 1
value | sample_rate stringclasses 1
value | transmitter_id class label 2
classes | status class label 3
classes |
|---|---|---|---|---|---|---|---|
[
[
0.0634765625,
0.08984375
],
[
0.068359375,
0.0888671875
],
[
0.05615234375,
0.0888671875
],
[
0.05908203125,
0.0830078125
],
[
0.06298828125,
0.06982421875
],
[
0.04541015625,
0.06005859375
],
[
0.03515625,
0.07470703125
],
[
... | The received signal record records transmitter identifier Mavic2AirS and the observed status is the flight state Flying in this capture. | When the recorded status is Flying, which transmitter value belongs to the record for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06103515625,
0.0927734375
],
[
0.05078125,
0.08984375
],
[
0.06396484375,
0.07421875
],
[
0.06884765625,
0.0712890625
],
[
0.0517578125,
0.09033203125
],
[
0.0390625,
0.1025390625
],
[
0.03955078125,
0.0888671875
],
[
0.0444... | The captured IQ segment records transmitter identifier Mavic2AirS and the current mode Flying in the processed record. | Using the status value Flying, which transmitter ID should be reported for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02685546875,
0.08544921875
],
[
0.04736328125,
0.087890625
],
[
0.05908203125,
0.0791015625
],
[
0.04833984375,
0.076171875
],
[
0.04248046875,
0.0869140625
],
[
0.0654296875,
0.09716796875
],
[
0.06201171875,
0.0966796875
],
[
... | The received signal record points to source transmitter Mavic2AirS with the operating condition set to the current mode Flying in the dataset. | For a signal in Flying state, what is the source transmitter ID for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06884765625,
0.103515625
],
[
0.06103515625,
0.08984375
],
[
0.04150390625,
0.08837890625
],
[
0.02880859375,
0.08837890625
],
[
0.0439453125,
0.07763671875
],
[
0.05615234375,
0.0712890625
],
[
0.05322265625,
0.087890625
],
[
... | This dataset item reports the source as Mavic2AirS with status classified as the flight state Flying for this sample. | Given status Flying, which source transmitter should be assigned for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05029296875,
0.0810546875
],
[
0.05224609375,
0.0732421875
],
[
0.0400390625,
0.0830078125
],
[
0.0390625,
0.078125
],
[
0.05615234375,
0.07080078125
],
[
0.064453125,
0.0859375
],
[
0.04833984375,
0.09375
],
[
0.03564453125... | The received signal record reports the source as Mavic2AirS with the operating condition set to the operating mode Flying in the processed record. | When the recorded status is Flying, what source device ID should be returned for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04736328125,
0.07470703125
],
[
0.0556640625,
0.0986328125
],
[
0.05078125,
0.095703125
],
[
0.05908203125,
0.0703125
],
[
0.08251953125,
0.0556640625
],
[
0.07666015625,
0.0703125
],
[
0.05029296875,
0.09765625
],
[
0.03759... | This dataset item reports the source as Mavic2AirS and the flight state Flying for model training. | When the activity state is Flying, which transmitter ID should be reported for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04833984375,
0.1005859375
],
[
0.06005859375,
0.0810546875
],
[
0.04833984375,
0.0771484375
],
[
0.03564453125,
0.09375
],
[
0.03662109375,
0.09814453125
],
[
0.046875,
0.0908203125
],
[
0.05322265625,
0.09375
],
[
0.0532226... | The current telemetry entry uses transmitter ID Mavic2AirS where the drone state is a Flying condition for model training. | For the current mode Flying, which emitting transmitter produced the signal for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05029296875,
0.0966796875
],
[
0.05859375,
0.09228515625
],
[
0.04443359375,
0.0712890625
],
[
0.03662109375,
0.05859375
],
[
0.0517578125,
0.05859375
],
[
0.05859375,
0.0810546875
],
[
0.046875,
0.1083984375
],
[
0.04248046... | The captured IQ segment records transmitter identifier Mavic2AirS while Flying. | When the activity state is Flying, what is the source transmitter ID for the monitored transmission? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.048828125,
0.083984375
],
[
0.08056640625,
0.0986328125
],
[
0.05419921875,
0.0927734375
],
[
0.02978515625,
0.078125
],
[
0.04443359375,
0.07373046875
],
[
0.05224609375,
0.0869140625
],
[
0.0390625,
0.0888671875
],
[
0.031... | The signal observation assigns transmitter code Mavic2AirS where the drone state is the Flying state in the signal log. | In a sample labeled Flying, what transmitter identifier should be used for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03173828125,
0.0859375
],
[
0.05615234375,
0.11572265625
],
[
0.05908203125,
0.1103515625
],
[
0.0361328125,
0.083984375
],
[
0.021484375,
0.0732421875
],
[
0.03515625,
0.072265625
],
[
0.0478515625,
0.07958984375
],
[
0.062... | The received signal record comes from transmitter Mavic2AirS under a recorded state of Flying for this sample. | For the current mode Flying, please determine the transmitter ID for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.029296875,
0.1025390625
],
[
0.0546875,
0.1123046875
],
[
0.05712890625,
0.095703125
],
[
0.04638671875,
0.08935546875
],
[
0.04443359375,
0.09326171875
],
[
0.046875,
0.0849609375
],
[
0.05078125,
0.07861328125
],
[
0.06201... | This DroneDetect sample assigns transmitter code Mavic2AirS with status classified as the recorded status Flying in the labeled example. | In a sample labeled Flying, what is the source transmitter ID for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03857421875,
0.0869140625
],
[
0.056640625,
0.08154296875
],
[
0.05517578125,
0.0791015625
],
[
0.03955078125,
0.0830078125
],
[
0.048828125,
0.08935546875
],
[
0.06884765625,
0.1025390625
],
[
0.048828125,
0.11328125
],
[
0... | The current telemetry entry uses transmitter ID Mavic2AirS with the operating condition set to Flying. | When the activity state is Flying, which transmitter value belongs to the record for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0390625,
0.1083984375
],
[
0.04736328125,
0.0947265625
],
[
0.04638671875,
0.06689453125
],
[
0.04150390625,
0.05908203125
],
[
0.03662109375,
0.0732421875
],
[
0.03173828125,
0.08544921875
],
[
0.03369140625,
0.0888671875
],
[
... | This RF capture is associated with transmitter Mavic2AirS with the signal showing the Flying state in the labeled example. | When the recorded status is Flying, what source device ID should be returned for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03857421875,
0.0810546875
],
[
0.044921875,
0.07470703125
],
[
0.05517578125,
0.07421875
],
[
0.05322265625,
0.08447265625
],
[
0.0556640625,
0.08935546875
],
[
0.06298828125,
0.091796875
],
[
0.0556640625,
0.0927734375
],
[
... | The monitoring log uses transmitter ID Mavic2AirS and a Flying condition in the dataset. | Using the status value Flying, which transmitter identifier fits this observation for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.07080078125,
0.0888671875
],
[
0.07275390625,
0.09033203125
],
[
0.046875,
0.08154296875
],
[
0.02685546875,
0.0771484375
],
[
0.04638671875,
0.0830078125
],
[
0.060546875,
0.09521484375
],
[
0.05908203125,
0.1005859375
],
[
... | The analyzed transmission assigns transmitter code Mavic2AirS and the status field reads the flight state Flying in the signal log. | For a signal in Flying state, please provide the transmitter identifier for the monitored transmission? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03466796875,
0.09326171875
],
[
0.04052734375,
0.09423828125
],
[
0.04541015625,
0.07861328125
],
[
0.03564453125,
0.08349609375
],
[
0.03564453125,
0.0927734375
],
[
0.05322265625,
0.0966796875
],
[
0.05615234375,
0.0830078125
],... | This DroneDetect sample comes from transmitter Mavic2AirS and the status field reads the Flying state for this IQ window. | Using the status value Flying, what transmitter ID is associated with the capture for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0673828125,
0.0888671875
],
[
0.046875,
0.0859375
],
[
0.02685546875,
0.0810546875
],
[
0.0439453125,
0.0908203125
],
[
0.06494140625,
0.099609375
],
[
0.05908203125,
0.08203125
],
[
0.04052734375,
0.06298828125
],
[
0.02734... | The captured IQ segment is associated with transmitter Mavic2AirS and the status field reads status Flying in the labeled example. | For an IQ segment marked Flying, which transmitter code matches the signal for the monitored transmission? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05419921875,
0.08154296875
],
[
0.05517578125,
0.099609375
],
[
0.044921875,
0.10595703125
],
[
0.03955078125,
0.0908203125
],
[
0.0478515625,
0.0732421875
],
[
0.05615234375,
0.06591796875
],
[
0.0498046875,
0.0703125
],
[
... | The current telemetry entry is associated with transmitter Mavic2AirS with the operating condition set to the recorded status Flying for this sample. | With the drone status known as Flying, which transmitter code should be selected for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04736328125,
0.076171875
],
[
0.06103515625,
0.09814453125
],
[
0.046875,
0.095703125
],
[
0.037109375,
0.08544921875
],
[
0.06494140625,
0.08544921875
],
[
0.07666015625,
0.08447265625
],
[
0.05517578125,
0.0771484375
],
[
... | The received signal record assigns transmitter code Mavic2AirS with the operating condition set to the operating mode Flying in the signal log. | For an IQ segment marked Flying, which RF source ID corresponds to the sample for this IQ capture? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03662109375,
0.09521484375
],
[
0.05126953125,
0.0703125
],
[
0.04443359375,
0.0703125
],
[
0.02392578125,
0.10009765625
],
[
0.03466796875,
0.1005859375
],
[
0.064453125,
0.083984375
],
[
0.06201171875,
0.08203125
],
[
0.03... | This RF capture marks Mavic2AirS as the transmitter and the operating mode Flying for model training. | For the current mode Flying, what is the transmitter ID for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.064453125,
0.07763671875
],
[
0.05517578125,
0.0908203125
],
[
0.03564453125,
0.09765625
],
[
0.03955078125,
0.09228515625
],
[
0.056640625,
0.08642578125
],
[
0.05224609375,
0.09033203125
],
[
0.02978515625,
0.0927734375
],
[
... | The captured IQ segment reports the source as Mavic2AirS with the signal showing the activity state Flying for this sample. | Given status Flying, what transmitter identifier should be used for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0703125,
0.08935546875
],
[
0.05712890625,
0.06591796875
],
[
0.03759765625,
0.07421875
],
[
0.0400390625,
0.0908203125
],
[
0.04736328125,
0.087890625
],
[
0.04833984375,
0.0732421875
],
[
0.05029296875,
0.078125
],
[
0.048... | The current telemetry entry uses transmitter ID Mavic2AirS and the observed status is the current mode Flying. | For this Flying observation, please determine the transmitter ID for this IQ capture? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04296875,
0.0478515625
],
[
0.04345703125,
0.0615234375
],
[
0.05810546875,
0.0966796875
],
[
0.06298828125,
0.0947265625
],
[
0.056640625,
0.07568359375
],
[
0.05029296875,
0.07861328125
],
[
0.04541015625,
0.0908203125
],
[
... | This dataset item lists the transmitter as Mavic2AirS with the signal showing the label Flying for the current observation. | When the activity state is Flying, please provide the transmitter identifier for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06298828125,
0.0771484375
],
[
0.0546875,
0.0908203125
],
[
0.05712890625,
0.087890625
],
[
0.06689453125,
0.072265625
],
[
0.04541015625,
0.0810546875
],
[
0.021484375,
0.0986328125
],
[
0.037109375,
0.0947265625
],
[
0.063... | The signal observation uses transmitter ID Mavic2AirS with the signal showing the recorded status Flying in the signal log. | For a signal in Flying state, please determine the transmitter ID for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.048828125,
0.06591796875
],
[
0.05517578125,
0.08740234375
],
[
0.05322265625,
0.1064453125
],
[
0.0478515625,
0.0947265625
],
[
0.04541015625,
0.0771484375
],
[
0.048828125,
0.08447265625
],
[
0.04736328125,
0.1025390625
],
[
... | The received signal record points to source transmitter Mavic2AirS while the flight condition is the operating mode Flying in the dataset. | When the recorded status is Flying, what source device ID should be returned for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06298828125,
0.08154296875
],
[
0.04052734375,
0.09619140625
],
[
0.0361328125,
0.09423828125
],
[
0.05322265625,
0.0888671875
],
[
0.05517578125,
0.08740234375
],
[
0.05029296875,
0.08740234375
],
[
0.0556640625,
0.0849609375
],
... | This RF capture records transmitter identifier Mavic2AirS while the flight condition is the Flying state in this capture. | Given status Flying, please provide the transmitter identifier for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04052734375,
0.09228515625
],
[
0.046875,
0.0869140625
],
[
0.06298828125,
0.08349609375
],
[
0.06787109375,
0.0908203125
],
[
0.05224609375,
0.1015625
],
[
0.03369140625,
0.10400390625
],
[
0.02685546875,
0.08203125
],
[
0.... | This DroneDetect sample uses transmitter ID Mavic2AirS with status classified as the Flying state in the labeled example. | Given status Flying, which emitting transmitter produced the signal for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03759765625,
0.07666015625
],
[
0.04541015625,
0.0732421875
],
[
0.03564453125,
0.06884765625
],
[
0.04833984375,
0.078125
],
[
0.05859375,
0.0888671875
],
[
0.046875,
0.072265625
],
[
0.02685546875,
0.05810546875
],
[
0.033... | The signal observation points to source transmitter Mavic2AirS under a recorded state of the Flying state in the processed record. | Using the status value Flying, please provide the transmitter identifier for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02392578125,
0.0771484375
],
[
0.05322265625,
0.083984375
],
[
0.078125,
0.095703125
],
[
0.052734375,
0.0966796875
],
[
0.03271484375,
0.08203125
],
[
0.06005859375,
0.0859375
],
[
0.0732421875,
0.1083984375
],
[
0.04296875... | This dataset item lists the transmitter as Mavic2AirS and the status field reads the operating mode Flying in the processed record. | For a signal in Flying state, what transmitter identifier should be used for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06298828125,
0.07470703125
],
[
0.056640625,
0.08935546875
],
[
0.037109375,
0.09814453125
],
[
0.0341796875,
0.07861328125
],
[
0.04736328125,
0.0576171875
],
[
0.046875,
0.07275390625
],
[
0.0390625,
0.087890625
],
[
0.046... | The captured IQ segment uses transmitter ID Mavic2AirS under a recorded state of a Flying condition for model training. | For the current mode Flying, what is the transmitting unit ID for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0361328125,
0.08935546875
],
[
0.0361328125,
0.09326171875
],
[
0.03759765625,
0.0908203125
],
[
0.04052734375,
0.0927734375
],
[
0.04736328125,
0.09912109375
],
[
0.04931640625,
0.08935546875
],
[
0.0400390625,
0.0771484375
],
... | This dataset item marks Mavic2AirS as the transmitter with status classified as the activity state Flying in the processed record. | With the drone status known as Flying, which source transmitter should be assigned for this IQ capture? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0556640625,
0.0673828125
],
[
0.06298828125,
0.0625
],
[
0.05517578125,
0.08203125
],
[
0.05078125,
0.0947265625
],
[
0.056640625,
0.09716796875
],
[
0.05859375,
0.08154296875
],
[
0.04296875,
0.06005859375
],
[
0.0361328125... | This DroneDetect sample marks Mavic2AirS as the transmitter and the activity state Flying for this IQ window. | When the recorded status is Flying, what source device ID should be returned for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05126953125,
0.08544921875
],
[
0.03759765625,
0.08447265625
],
[
0.04833984375,
0.09423828125
],
[
0.06982421875,
0.099609375
],
[
0.06640625,
0.07666015625
],
[
0.03759765625,
0.0751953125
],
[
0.02294921875,
0.11279296875
],
... | The current telemetry entry identifies transmitter Mavic2AirS and status Flying in the labeled example. | For a signal in Flying state, what is the transmitter ID for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0556640625,
0.0751953125
],
[
0.05810546875,
0.08544921875
],
[
0.04443359375,
0.0849609375
],
[
0.02392578125,
0.07763671875
],
[
0.025390625,
0.07080078125
],
[
0.03955078125,
0.0693359375
],
[
0.0498046875,
0.0771484375
],
[
... | The analyzed transmission assigns transmitter code Mavic2AirS while the flight condition is the activity state Flying for this IQ window. | For this Flying observation, what source transmitter is indicated for this IQ capture? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04296875,
0.091796875
],
[
0.04931640625,
0.08935546875
],
[
0.05322265625,
0.095703125
],
[
0.0390625,
0.11328125
],
[
0.02490234375,
0.1083984375
],
[
0.03125,
0.078125
],
[
0.05419921875,
0.0634765625
],
[
0.064453125,
... | The current telemetry entry lists the transmitter as Mavic2AirS while the flight condition is the recorded status Flying in the processed record. | For an IQ segment marked Flying, which transmitter value belongs to the record for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04736328125,
0.0830078125
],
[
0.04931640625,
0.0830078125
],
[
0.05078125,
0.07763671875
],
[
0.04638671875,
0.078125
],
[
0.04833984375,
0.0849609375
],
[
0.05224609375,
0.0849609375
],
[
0.0546875,
0.0849609375
],
[
0.061... | The received signal record identifies transmitter Mavic2AirS with the operating condition set to a Flying condition in the signal log. | For this Flying observation, which transmitter code matches the signal for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03515625,
0.0771484375
],
[
0.03759765625,
0.07470703125
],
[
0.05908203125,
0.0810546875
],
[
0.07275390625,
0.09375
],
[
0.06005859375,
0.09326171875
],
[
0.04150390625,
0.068359375
],
[
0.046875,
0.0595703125
],
[
0.05908... | The signal observation assigns transmitter code Mavic2AirS with status classified as the activity state Flying for model training. | When the recorded status is Flying, what transmitter label should be recorded for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.064453125,
0.09423828125
],
[
0.05517578125,
0.1123046875
],
[
0.02685546875,
0.10693359375
],
[
0.02880859375,
0.06982421875
],
[
0.04638671875,
0.0537109375
],
[
0.04638671875,
0.0751953125
],
[
0.037109375,
0.0947265625
],
[
... | The monitoring log identifies transmitter Mavic2AirS under a recorded state of the current mode Flying for this sample. | For a signal in Flying state, what is the transmitter ID for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06396484375,
0.09375
],
[
0.05615234375,
0.08984375
],
[
0.06005859375,
0.087890625
],
[
0.0634765625,
0.09716796875
],
[
0.05615234375,
0.10205078125
],
[
0.04833984375,
0.087890625
],
[
0.05078125,
0.0654296875
],
[
0.0551... | The analyzed transmission assigns transmitter code Mavic2AirS under a recorded state of the operating mode Flying for the current observation. | For the current mode Flying, please determine the transmitter ID for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05712890625,
0.083984375
],
[
0.05908203125,
0.0966796875
],
[
0.05078125,
0.1005859375
],
[
0.04296875,
0.09033203125
],
[
0.03564453125,
0.080078125
],
[
0.03271484375,
0.0732421875
],
[
0.04443359375,
0.0771484375
],
[
0.... | The recorded drone signal identifies transmitter Mavic2AirS where the drone state is the current mode Flying in the dataset. | Given status Flying, which source transmitter should be assigned for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03125,
0.10595703125
],
[
0.03759765625,
0.087890625
],
[
0.06396484375,
0.0576171875
],
[
0.0732421875,
0.06396484375
],
[
0.05322265625,
0.08447265625
],
[
0.04736328125,
0.0849609375
],
[
0.05419921875,
0.0849609375
],
[
... | This RF capture uses transmitter ID Mavic2AirS while the flight condition is Flying in the processed record. | With the drone status known as Flying, which RF source ID corresponds to the sample for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04052734375,
0.0859375
],
[
0.05908203125,
0.0693359375
],
[
0.07666015625,
0.0732421875
],
[
0.04833984375,
0.0849609375
],
[
0.01953125,
0.09130859375
],
[
0.0322265625,
0.0869140625
],
[
0.05517578125,
0.0810546875
],
[
0... | The monitoring log uses transmitter ID Mavic2AirS under a recorded state of the flight state Flying for this IQ window. | With the drone status known as Flying, which transmitter identifier fits this observation for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06298828125,
0.06982421875
],
[
0.046875,
0.072265625
],
[
0.02734375,
0.0732421875
],
[
0.0361328125,
0.0927734375
],
[
0.05859375,
0.0966796875
],
[
0.05908203125,
0.07763671875
],
[
0.048828125,
0.068359375
],
[
0.0400390... | This RF capture uses transmitter ID Mavic2AirS under a recorded state of a Flying condition in the signal log. | Using the status value Flying, what transmitting unit should be labeled for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0390625,
0.10595703125
],
[
0.05517578125,
0.0771484375
],
[
0.07470703125,
0.0654296875
],
[
0.05224609375,
0.0869140625
],
[
0.01953125,
0.09326171875
],
[
0.03271484375,
0.07421875
],
[
0.06640625,
0.0771484375
],
[
0.043... | This RF capture lists the transmitter as Mavic2AirS and the observed status is Flying in the dataset. | For an IQ segment marked Flying, what source transmitter is indicated for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0322265625,
0.0830078125
],
[
0.0478515625,
0.09326171875
],
[
0.06005859375,
0.08544921875
],
[
0.06494140625,
0.0712890625
],
[
0.04931640625,
0.07861328125
],
[
0.04736328125,
0.08203125
],
[
0.05322265625,
0.0810546875
],
[
... | The current telemetry entry reports the source as Mavic2AirS and the recorded status Flying. | For a signal in Flying state, which transmitter code matches the signal for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02587890625,
0.08251953125
],
[
0.04443359375,
0.076171875
],
[
0.06298828125,
0.0947265625
],
[
0.05419921875,
0.09228515625
],
[
0.02978515625,
0.0703125
],
[
0.037109375,
0.0751953125
],
[
0.05810546875,
0.0966796875
],
[
... | The analyzed transmission comes from transmitter Mavic2AirS with the signal showing the label Flying in the dataset. | Using the status value Flying, what is the transmitting unit ID for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03662109375,
0.0810546875
],
[
0.0205078125,
0.0859375
],
[
0.03955078125,
0.09765625
],
[
0.06103515625,
0.09423828125
],
[
0.0556640625,
0.0712890625
],
[
0.04296875,
0.06787109375
],
[
0.04736328125,
0.08935546875
],
[
0.... | The captured IQ segment assigns transmitter code Mavic2AirS with the operating condition set to the operating mode Flying in the dataset. | Using the status value Flying, what transmitter identifier should be used for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05908203125,
0.0771484375
],
[
0.048828125,
0.08935546875
],
[
0.02978515625,
0.10400390625
],
[
0.03515625,
0.0947265625
],
[
0.04345703125,
0.083984375
],
[
0.05517578125,
0.087890625
],
[
0.0546875,
0.0927734375
],
[
0.03... | The received signal record uses transmitter ID Mavic2AirS where the drone state is status Flying for model training. | For the current mode Flying, what transmitter ID is associated with the capture for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0498046875,
0.0927734375
],
[
0.05224609375,
0.0927734375
],
[
0.04736328125,
0.083984375
],
[
0.03564453125,
0.0771484375
],
[
0.0478515625,
0.08447265625
],
[
0.06396484375,
0.09033203125
],
[
0.05712890625,
0.08740234375
],
[... | The captured IQ segment is associated with transmitter Mavic2AirS with the signal showing the label Flying for this sample. | For an IQ segment marked Flying, what source device ID should be returned for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.029296875,
0.07763671875
],
[
0.0517578125,
0.06884765625
],
[
0.0732421875,
0.0673828125
],
[
0.05517578125,
0.0927734375
],
[
0.04638671875,
0.1083984375
],
[
0.06201171875,
0.08203125
],
[
0.0546875,
0.05859375
],
[
0.037... | The captured IQ segment reports the source as Mavic2AirS with the signal showing the activity state Flying for this sample. | When the recorded status is Flying, what is the transmitting unit ID for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.06689453125,
0.08251953125
],
[
0.05908203125,
0.07666015625
],
[
0.05029296875,
0.07373046875
],
[
0.04833984375,
0.08544921875
],
[
0.04833984375,
0.07470703125
],
[
0.04736328125,
0.0556640625
],
[
0.03759765625,
0.06982421875
... | The current telemetry entry points to source transmitter Mavic2AirS where the drone state is the Flying state for this sample. | Using the status value Flying, which transmitter value belongs to the record for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0390625,
0.078125
],
[
0.06787109375,
0.1025390625
],
[
0.076171875,
0.10205078125
],
[
0.05126953125,
0.09130859375
],
[
0.03125,
0.091796875
],
[
0.03564453125,
0.083984375
],
[
0.04736328125,
0.07373046875
],
[
0.04638671... | The signal observation lists the transmitter as Mavic2AirS with the operating condition set to status Flying. | With the drone status known as Flying, which emitting transmitter produced the signal for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04296875,
0.0732421875
],
[
0.03759765625,
0.087890625
],
[
0.03515625,
0.0830078125
],
[
0.0517578125,
0.076171875
],
[
0.0703125,
0.08251953125
],
[
0.05419921875,
0.0888671875
],
[
0.02978515625,
0.078125
],
[
0.040039062... | The recorded drone signal records transmitter identifier Mavic2AirS under a recorded state of the recorded status Flying in the signal log. | In a sample labeled Flying, which transmitter ID should be reported for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04736328125,
0.08837890625
],
[
0.041015625,
0.0419921875
],
[
0.03857421875,
0.04296875
],
[
0.03662109375,
0.0888671875
],
[
0.04248046875,
0.1005859375
],
[
0.05908203125,
0.0810546875
],
[
0.0654296875,
0.06982421875
],
[
... | The current telemetry entry is associated with transmitter Mavic2AirS and the recorded status Flying for model training. | When the recorded status is Flying, what is the transmitter ID for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0517578125,
0.0869140625
],
[
0.05126953125,
0.0771484375
],
[
0.04296875,
0.078125
],
[
0.041015625,
0.0771484375
],
[
0.0634765625,
0.07568359375
],
[
0.07568359375,
0.0791015625
],
[
0.06201171875,
0.0849609375
],
[
0.050... | This dataset item reports the source as Mavic2AirS with the signal showing the label Flying in the processed record. | For a signal in Flying state, what is the transmitting unit ID for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05322265625,
0.0859375
],
[
0.05517578125,
0.076171875
],
[
0.044921875,
0.0771484375
],
[
0.03955078125,
0.0791015625
],
[
0.04541015625,
0.0751953125
],
[
0.05322265625,
0.08056640625
],
[
0.06103515625,
0.09228515625
],
[
... | The captured IQ segment uses transmitter ID Mavic2AirS while a Flying condition for this sample. | Given status Flying, what is the source transmitter ID for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03759765625,
0.07861328125
],
[
0.05078125,
0.0830078125
],
[
0.06201171875,
0.0830078125
],
[
0.05712890625,
0.07568359375
],
[
0.04833984375,
0.0810546875
],
[
0.04833984375,
0.08203125
],
[
0.05810546875,
0.080078125
],
[
... | The captured IQ segment reports the source as Mavic2AirS with the operating condition set to status Flying for this sample. | In a sample labeled Flying, which transmitter value belongs to the record for the monitored transmission? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.044921875,
0.0986328125
],
[
0.04296875,
0.0947265625
],
[
0.06591796875,
0.083984375
],
[
0.0703125,
0.07421875
],
[
0.04345703125,
0.0869140625
],
[
0.02587890625,
0.09423828125
],
[
0.0361328125,
0.078125
],
[
0.040527343... | The recorded drone signal comes from transmitter Mavic2AirS with status classified as the Flying state in the signal log. | For a signal in Flying state, which transmitter ID should be reported for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0703125,
0.1005859375
],
[
0.06103515625,
0.12841796875
],
[
0.0517578125,
0.111328125
],
[
0.05126953125,
0.078125
],
[
0.04833984375,
0.0791015625
],
[
0.04345703125,
0.09423828125
],
[
0.0478515625,
0.08544921875
],
[
0.0... | This RF capture lists the transmitter as Mavic2AirS and the observed status is status Flying in the signal log. | For the current mode Flying, which transmitter value belongs to the record for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0390625,
0.08984375
],
[
0.0185546875,
0.08203125
],
[
0.03564453125,
0.08544921875
],
[
0.064453125,
0.10107421875
],
[
0.06640625,
0.095703125
],
[
0.05517578125,
0.0810546875
],
[
0.04833984375,
0.07421875
],
[
0.04443359... | This dataset item records transmitter identifier Mavic2AirS under a recorded state of the current mode Flying in the signal log. | In a sample labeled Flying, which transmitter ID should be reported for the monitored transmission? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04833984375,
0.08984375
],
[
0.02490234375,
0.0966796875
],
[
0.04248046875,
0.0810546875
],
[
0.064453125,
0.06982421875
],
[
0.05419921875,
0.0751953125
],
[
0.02197265625,
0.07177734375
],
[
0.01953125,
0.07080078125
],
[
... | The recorded drone signal records transmitter identifier Mavic2AirS under a recorded state of the recorded status Flying. | With the drone status known as Flying, what transmitter identifier should be used for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0556640625,
0.111328125
],
[
0.05615234375,
0.10009765625
],
[
0.041015625,
0.0810546875
],
[
0.04833984375,
0.0810546875
],
[
0.07666015625,
0.1005859375
],
[
0.068359375,
0.1015625
],
[
0.03173828125,
0.09326171875
],
[
0.... | This RF capture points to source transmitter Mavic2AirS and the status field reads the operating mode Flying in the dataset. | For a signal in Flying state, which transmitter identifier fits this observation for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.048828125,
0.0693359375
],
[
0.05078125,
0.07666015625
],
[
0.03759765625,
0.10888671875
],
[
0.0361328125,
0.11865234375
],
[
0.0439453125,
0.08203125
],
[
0.0478515625,
0.06494140625
],
[
0.04443359375,
0.08203125
],
[
0.0... | This RF capture reports the source as Mavic2AirS and the observed status is status Flying for this sample. | When the activity state is Flying, please provide the transmitter identifier for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03173828125,
0.078125
],
[
0.04931640625,
0.06591796875
],
[
0.048828125,
0.0771484375
],
[
0.046875,
0.09375
],
[
0.04833984375,
0.1044921875
],
[
0.046875,
0.109375
],
[
0.03076171875,
0.10009765625
],
[
0.02490234375,
... | The analyzed transmission records transmitter identifier Mavic2AirS while the flight state Flying in the processed record. | With the drone status known as Flying, what transmitter ID is associated with the capture for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05322265625,
0.10888671875
],
[
0.05078125,
0.095703125
],
[
0.05224609375,
0.08544921875
],
[
0.05810546875,
0.07958984375
],
[
0.0556640625,
0.07373046875
],
[
0.0498046875,
0.07861328125
],
[
0.05419921875,
0.08642578125
],
[... | This DroneDetect sample identifies transmitter Mavic2AirS with the signal showing the current mode Flying for the current observation. | When the recorded status is Flying, what is the transmitting unit ID for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02783203125,
0.08544921875
],
[
0.02978515625,
0.09765625
],
[
0.02685546875,
0.1015625
],
[
0.025390625,
0.072265625
],
[
0.0390625,
0.05908203125
],
[
0.05908203125,
0.09423828125
],
[
0.05517578125,
0.1123046875
],
[
0.04... | This DroneDetect sample uses transmitter ID Mavic2AirS and the observed status is Flying for the current observation. | In a sample labeled Flying, can you identify the transmitter ID for the monitored transmission? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0361328125,
0.07421875
],
[
0.04248046875,
0.076171875
],
[
0.04443359375,
0.08740234375
],
[
0.05078125,
0.08447265625
],
[
0.05810546875,
0.0849609375
],
[
0.05810546875,
0.0927734375
],
[
0.0556640625,
0.08935546875
],
[
... | The current telemetry entry assigns transmitter code Mavic2AirS under a recorded state of the current mode Flying in this capture. | For this Flying observation, what source device ID should be returned for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04443359375,
0.0673828125
],
[
0.04345703125,
0.09228515625
],
[
0.0439453125,
0.1083984375
],
[
0.03125,
0.1044921875
],
[
0.02783203125,
0.09375
],
[
0.04248046875,
0.08642578125
],
[
0.05078125,
0.09130859375
],
[
0.04150... | The current telemetry entry uses transmitter ID Mavic2AirS and the observed status is the Flying state in the signal log. | For the current mode Flying, what transmitter ID is associated with the capture for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04736328125,
0.07373046875
],
[
0.04833984375,
0.0634765625
],
[
0.04541015625,
0.0791015625
],
[
0.0478515625,
0.08984375
],
[
0.06640625,
0.0849609375
],
[
0.06982421875,
0.078125
],
[
0.04736328125,
0.09423828125
],
[
0.0... | This dataset item is associated with transmitter Mavic2AirS under a recorded state of the recorded status Flying for this sample. | For this Flying observation, what transmitter label should be recorded for the monitored transmission? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0341796875,
0.05517578125
],
[
0.03125,
0.0791015625
],
[
0.03857421875,
0.111328125
],
[
0.04541015625,
0.12255859375
],
[
0.04541015625,
0.10498046875
],
[
0.05126953125,
0.087890625
],
[
0.04541015625,
0.0771484375
],
[
0... | The received signal record records transmitter identifier Mavic2AirS and the observed status is the activity state Flying for model training. | Given status Flying, which transmitter code matches the signal for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0478515625,
0.0791015625
],
[
0.05322265625,
0.08935546875
],
[
0.02587890625,
0.1044921875
],
[
0.017578125,
0.0908203125
],
[
0.03857421875,
0.07421875
],
[
0.04541015625,
0.0732421875
],
[
0.03466796875,
0.1005859375
],
[
... | The received signal record comes from transmitter Mavic2AirS under a recorded state of the activity state Flying in the dataset. | When the recorded status is Flying, what is the transmitter ID for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.07763671875,
0.0791015625
],
[
0.08837890625,
0.10400390625
],
[
0.07421875,
0.09423828125
],
[
0.056640625,
0.0771484375
],
[
0.0439453125,
0.0908203125
],
[
0.04541015625,
0.1064453125
],
[
0.05810546875,
0.0888671875
],
[
... | The analyzed transmission marks Mavic2AirS as the transmitter and the status field reads the flight state Flying in the signal log. | Given status Flying, which transmitter code matches the signal for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04833984375,
0.08642578125
],
[
0.05517578125,
0.0927734375
],
[
0.05126953125,
0.083984375
],
[
0.0390625,
0.0859375
],
[
0.029296875,
0.0927734375
],
[
0.033203125,
0.0771484375
],
[
0.03955078125,
0.0634765625
],
[
0.0366... | This RF capture uses transmitter ID Mavic2AirS with the signal showing the current mode Flying in this capture. | When the recorded status is Flying, what source device ID should be returned for this IQ capture? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04443359375,
0.0908203125
],
[
0.05419921875,
0.1015625
],
[
0.07470703125,
0.0810546875
],
[
0.07666015625,
0.0625
],
[
0.0478515625,
0.080078125
],
[
0.01171875,
0.107421875
],
[
0.0185546875,
0.09716796875
],
[
0.05126953... | The received signal record identifies transmitter Mavic2AirS with the signal showing the activity state Flying for model training. | In a sample labeled Flying, what transmitting unit should be labeled for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04638671875,
0.0830078125
],
[
0.03759765625,
0.1025390625
],
[
0.0400390625,
0.087890625
],
[
0.04443359375,
0.07177734375
],
[
0.05029296875,
0.078125
],
[
0.056640625,
0.09765625
],
[
0.06201171875,
0.0947265625
],
[
0.05... | The recorded drone signal lists the transmitter as Mavic2AirS where the drone state is the label Flying for this sample. | For the current mode Flying, which transmitter ID should be reported for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0390625,
0.10107421875
],
[
0.04150390625,
0.0966796875
],
[
0.0478515625,
0.083984375
],
[
0.046875,
0.0859375
],
[
0.05322265625,
0.0869140625
],
[
0.07421875,
0.07861328125
],
[
0.07666015625,
0.076171875
],
[
0.048339843... | The signal observation comes from transmitter Mavic2AirS while the flight state Flying for model training. | For this Flying observation, which emitting transmitter produced the signal for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0478515625,
0.09423828125
],
[
0.04248046875,
0.09326171875
],
[
0.05078125,
0.0810546875
],
[
0.04833984375,
0.06640625
],
[
0.03564453125,
0.0634765625
],
[
0.03271484375,
0.06689453125
],
[
0.04150390625,
0.0654296875
],
[
... | The recorded drone signal comes from transmitter Mavic2AirS with the signal showing the activity state Flying for the current observation. | Given status Flying, what is the transmitter ID for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0419921875,
0.09765625
],
[
0.04541015625,
0.09912109375
],
[
0.05322265625,
0.0966796875
],
[
0.04833984375,
0.095703125
],
[
0.04736328125,
0.09716796875
],
[
0.05517578125,
0.095703125
],
[
0.06103515625,
0.09228515625
],
[
... | This RF capture is associated with transmitter Mavic2AirS with the operating condition set to the flight state Flying for this IQ window. | For a signal in Flying state, which transmitter code matches the signal for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0634765625,
0.08349609375
],
[
0.03759765625,
0.0751953125
],
[
0.04296875,
0.072265625
],
[
0.056640625,
0.0830078125
],
[
0.04931640625,
0.10546875
],
[
0.0341796875,
0.09423828125
],
[
0.0419921875,
0.0771484375
],
[
0.05... | The current telemetry entry is associated with transmitter Mavic2AirS with the signal showing the current mode Flying in the processed record. | With the drone status known as Flying, what transmitter identifier should be used for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04541015625,
0.07421875
],
[
0.04296875,
0.09423828125
],
[
0.052734375,
0.09375
],
[
0.05615234375,
0.08447265625
],
[
0.05126953125,
0.08251953125
],
[
0.04736328125,
0.08251953125
],
[
0.048828125,
0.080078125
],
[
0.0488... | The analyzed transmission assigns transmitter code Mavic2AirS with the operating condition set to the label Flying in the dataset. | When the activity state is Flying, what transmitter ID is associated with the capture for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03955078125,
0.09423828125
],
[
0.02392578125,
0.08154296875
],
[
0.03173828125,
0.06689453125
],
[
0.04296875,
0.0849609375
],
[
0.04150390625,
0.09765625
],
[
0.04248046875,
0.0771484375
],
[
0.04833984375,
0.07373046875
],
[
... | This dataset item reports the source as Mavic2AirS and the status field reads the flight state Flying in this capture. | Using the status value Flying, what source transmitter is indicated for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02685546875,
0.08203125
],
[
0.02392578125,
0.07763671875
],
[
0.06494140625,
0.07763671875
],
[
0.09326171875,
0.08837890625
],
[
0.0634765625,
0.08447265625
],
[
0.0234375,
0.0712890625
],
[
0.02880859375,
0.080078125
],
[
... | The recorded drone signal assigns transmitter code Mavic2AirS and the status field reads the activity state Flying for this IQ window. | For an IQ segment marked Flying, what is the transmitter ID for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03564453125,
0.08984375
],
[
0.02001953125,
0.0791015625
],
[
0.01806640625,
0.0732421875
],
[
0.0546875,
0.0673828125
],
[
0.07666015625,
0.07080078125
],
[
0.05810546875,
0.078125
],
[
0.04052734375,
0.0732421875
],
[
0.05... | The monitoring log records transmitter identifier Mavic2AirS while the recorded status Flying. | When the recorded status is Flying, which source transmitter should be assigned for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0400390625,
0.11279296875
],
[
0.02001953125,
0.0927734375
],
[
0.02880859375,
0.0712890625
],
[
0.046875,
0.0869140625
],
[
0.05908203125,
0.1083984375
],
[
0.06884765625,
0.091796875
],
[
0.06298828125,
0.06396484375
],
[
... | This dataset item uses transmitter ID Mavic2AirS where the drone state is a Flying condition in the processed record. | For a signal in Flying state, what transmitter ID is associated with the capture for the current record? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05419921875,
0.0693359375
],
[
0.0478515625,
0.0703125
],
[
0.05615234375,
0.0966796875
],
[
0.06201171875,
0.1005859375
],
[
0.04541015625,
0.08154296875
],
[
0.0390625,
0.08203125
],
[
0.05517578125,
0.09716796875
],
[
0.0... | The analyzed transmission lists the transmitter as Mavic2AirS and the observed status is the activity state Flying for model training. | Using the status value Flying, what is the transmitting unit ID for this IQ capture? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05322265625,
0.09716796875
],
[
0.03271484375,
0.0947265625
],
[
0.03662109375,
0.0966796875
],
[
0.04833984375,
0.08642578125
],
[
0.04833984375,
0.0654296875
],
[
0.04150390625,
0.06396484375
],
[
0.0400390625,
0.0849609375
],
... | The recorded drone signal records transmitter identifier Mavic2AirS under a recorded state of the recorded status Flying in the signal log. | For a signal in Flying state, what transmitter label should be recorded for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03466796875,
0.05859375
],
[
0.05322265625,
0.0634765625
],
[
0.07373046875,
0.0908203125
],
[
0.06787109375,
0.1064453125
],
[
0.03564453125,
0.0927734375
],
[
0.02099609375,
0.07568359375
],
[
0.05224609375,
0.080078125
],
[
... | The signal observation is associated with transmitter Mavic2AirS under a recorded state of a Flying condition for this sample. | When the activity state is Flying, can you identify the transmitter ID for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05126953125,
0.07470703125
],
[
0.048828125,
0.0869140625
],
[
0.05810546875,
0.09033203125
],
[
0.06396484375,
0.09765625
],
[
0.06201171875,
0.09375
],
[
0.052734375,
0.08203125
],
[
0.048828125,
0.07763671875
],
[
0.05322... | The monitoring log comes from transmitter Mavic2AirS under a recorded state of the recorded status Flying in the signal log. | When the recorded status is Flying, which transmitter identifier fits this observation for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.056640625,
0.0888671875
],
[
0.04638671875,
0.08984375
],
[
0.046875,
0.0986328125
],
[
0.04345703125,
0.10400390625
],
[
0.02685546875,
0.083984375
],
[
0.03271484375,
0.0576171875
],
[
0.0546875,
0.0615234375
],
[
0.048339... | The monitoring log comes from transmitter Mavic2AirS with the operating condition set to the flight state Flying for the current observation. | For an IQ segment marked Flying, which transmitter code should be selected for this observation? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.03271484375,
0.0556640625
],
[
0.04931640625,
0.0537109375
],
[
0.05615234375,
0.083984375
],
[
0.05078125,
0.1025390625
],
[
0.0478515625,
0.09765625
],
[
0.048828125,
0.09033203125
],
[
0.0556640625,
0.08203125
],
[
0.0683... | The monitoring log identifies transmitter Mavic2AirS while the flight condition is the recorded status Flying for the current observation. | When the recorded status is Flying, what source device ID should be returned for this DroneDetect item? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02734375,
0.0849609375
],
[
0.04833984375,
0.08447265625
],
[
0.08837890625,
0.1064453125
],
[
0.0732421875,
0.10986328125
],
[
0.02392578125,
0.0849609375
],
[
0.0234375,
0.078125
],
[
0.05126953125,
0.1015625
],
[
0.051757... | The captured IQ segment uses transmitter ID Mavic2AirS with the signal showing status Flying for this sample. | For a signal in Flying state, which source transmitter should be assigned for this IQ capture? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0390625,
0.07470703125
],
[
0.0361328125,
0.1015625
],
[
0.04736328125,
0.1005859375
],
[
0.06884765625,
0.068359375
],
[
0.0703125,
0.064453125
],
[
0.05224609375,
0.091796875
],
[
0.0390625,
0.10205078125
],
[
0.0581054687... | The signal observation lists the transmitter as Mavic2AirS with the signal showing the operating mode Flying for this sample. | In a sample labeled Flying, what transmitter identifier should be used for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05908203125,
0.06689453125
],
[
0.07177734375,
0.07763671875
],
[
0.05615234375,
0.1142578125
],
[
0.0439453125,
0.1259765625
],
[
0.0478515625,
0.095703125
],
[
0.05810546875,
0.06640625
],
[
0.068359375,
0.0712890625
],
[
... | The signal observation reports the source as Mavic2AirS under a recorded state of the Flying state for this sample. | When the recorded status is Flying, which RF source ID corresponds to the sample for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.0517578125,
0.0703125
],
[
0.06640625,
0.0791015625
],
[
0.048828125,
0.09033203125
],
[
0.02734375,
0.08935546875
],
[
0.03564453125,
0.09228515625
],
[
0.0673828125,
0.0986328125
],
[
0.07861328125,
0.08447265625
],
[
0.05... | The signal observation assigns transmitter code Mavic2AirS with the operating condition set to the Flying state. | For this Flying observation, what transmitter identifier should be used for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02587890625,
0.078125
],
[
0.03564453125,
0.05712890625
],
[
0.05810546875,
0.0810546875
],
[
0.05712890625,
0.1015625
],
[
0.02978515625,
0.08154296875
],
[
0.02978515625,
0.0732421875
],
[
0.04638671875,
0.0966796875
],
[
... | The received signal record uses transmitter ID Mavic2AirS under a recorded state of the current mode Flying in the labeled example. | When the activity state is Flying, what is the transmitter ID for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.04443359375,
0.0673828125
],
[
0.06201171875,
0.08056640625
],
[
0.0712890625,
0.09814453125
],
[
0.046875,
0.0888671875
],
[
0.03271484375,
0.08203125
],
[
0.03759765625,
0.08349609375
],
[
0.04150390625,
0.0849609375
],
[
... | The captured IQ segment is associated with transmitter Mavic2AirS and the observed status is the flight state Flying. | For this Flying observation, what is the source transmitter ID for the dataset entry? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.060546875,
0.07373046875
],
[
0.04345703125,
0.07763671875
],
[
0.02978515625,
0.0849609375
],
[
0.04833984375,
0.076171875
],
[
0.0634765625,
0.083984375
],
[
0.048828125,
0.09130859375
],
[
0.033203125,
0.08203125
],
[
0.0... | The recorded drone signal assigns transmitter code Mavic2AirS and the observed status is the Flying state in the signal log. | When the activity state is Flying, what is the transmitter ID for this sample? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.05322265625,
0.08935546875
],
[
0.06689453125,
0.09130859375
],
[
0.05615234375,
0.0771484375
],
[
0.0390625,
0.072265625
],
[
0.0517578125,
0.080078125
],
[
0.05712890625,
0.07373046875
],
[
0.04052734375,
0.07080078125
],
[
... | The monitoring log is associated with transmitter Mavic2AirS while the label Flying for this sample. | For the current mode Flying, which transmitter code matches the signal for the labeled example? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.02978515625,
0.072265625
],
[
0.03271484375,
0.09521484375
],
[
0.0625,
0.1025390625
],
[
0.05810546875,
0.0869140625
],
[
0.03662109375,
0.0810546875
],
[
0.03271484375,
0.0810546875
],
[
0.046875,
0.08544921875
],
[
0.0581... | The monitoring log identifies transmitter Mavic2AirS while the flight condition is Flying in the processed record. | When the recorded status is Flying, what source transmitter is indicated for this signal? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
[
[
0.060546875,
0.0732421875
],
[
0.0546875,
0.08203125
],
[
0.05810546875,
0.099609375
],
[
0.05517578125,
0.08056640625
],
[
0.03173828125,
0.05615234375
],
[
0.02587890625,
0.07763671875
],
[
0.06298828125,
0.1025390625
],
[
0... | This RF capture points to source transmitter Mavic2AirS with the operating condition set to a Flying condition in the labeled example. | When the recorded status is Flying, what is the transmitter ID for the analyzed segment? | 2.4375 GHz | 28 MHz | 60 Mbits/s | 4Mavic2AirS | 2Flying |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.