Datasets:
SICEAI
/
DroneDetect_0521

Dataset card Data Studio Files
xet
 Community
1
iq
array 2D
Prompt
stringlengths
71
162
qa
stringlengths
64
126
center_frequency
stringclasses
1 value
bandwidth
stringclasses
1 value
sample_rate
stringclasses
1 value
transmitter_id
class label
2 classes
status
class label
3 classes
[ [ -0.06201171875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.6357421875 ], [ 0.48291015625, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.38330078125 ], [ -0.72607421875, 1.02099609375 ...
This RF capture lists the transmitter as Mavic2AirS and the status field reads the recorded status Flying in the dataset.
When the activity state is Flying, what is the transmitter ID for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 0.39111328125 ], [ -0.6943359375, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.52734375 ], [ 0.49169921875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], ...
This DroneDetect sample identifies transmitter Mavic2AirS and the status field reads status Flying in this capture.
Given status Flying, which transmitter identifier fits this observation for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 0.1015625 ], [ 1.02001953125, -0.978515625 ], [ -0.82568359375, -0.978515625 ], [ -0.9794921875, -0.2041015625 ], [ -0.9794921875, 1.02099609375 ], [ 0.77001953125, 1.02099609375 ], [ 1.02001953125, 0.60986328125 ], ...
The received signal record uses transmitter ID Mavic2AirS and the observed status is status Flying for model training.
For an IQ segment marked Flying, which RF source ID corresponds to the sample for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.0185546875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.20703125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.728515625 ], ...
The recorded drone signal identifies transmitter Mavic2AirS with status classified as status Flying in the dataset.
Using the status value Flying, which RF source ID corresponds to the sample for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.22900390625 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.09326171875 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ]...
This dataset item uses transmitter ID Mavic2AirS with the operating condition set to the current mode Flying for the current observation.
For this Flying observation, which transmitter value belongs to the record for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.7451171875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.453125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ ...
The current telemetry entry lists the transmitter as Mavic2AirS with status classified as a Flying condition in the signal log.
For a signal in Flying state, which RF source ID corresponds to the sample for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.9541015625 ], [ -0.9794921875, 1.02099609375 ], [ 0.77001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.73828125, -0.978515625 ], ...
The captured IQ segment assigns transmitter code Mavic2AirS under a recorded state of the Flying state in the signal log.
For a signal in Flying state, which transmitter identifier fits this observation for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.818359375 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.30029296875 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ],...
This RF capture records transmitter identifier Mavic2AirS and the status field reads a Flying condition for this IQ window.
Given status Flying, what transmitter ID is associated with the capture for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.92431640625, -0.978515625 ], [ -0.9794921875, -0.2685546875 ], [ -0.9794921875, 1.02099609375 ], [ 0.77001953125, 1.02099609375 ], [ 1.02001953125, 0.4921875 ], [ 1.02001953125, -0.978515625 ], [ -0.74267578125, -0.978515625 ], ...
The current telemetry entry lists the transmitter as Mavic2AirS with status classified as Flying for this sample.
With the drone status known as Flying, what transmitting unit should be labeled for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.29052734375, -0.765625 ], [ -0.7578125, -0.03759765625 ], [ -0.390625, 0.63671875 ], [ 0.28125, 0.67041015625 ], [ 0.57421875, 0.19921875 ], [ 0.31591796875, -0.2255859375 ], [ -0.0693359375, -0.2431640625 ], [ -0.170410156...
The analyzed transmission uses transmitter ID Mavic2AirS under a recorded state of the operating mode Flying in the dataset.
Using the status value Flying, which transmitter value belongs to the record for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.228515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.79248046875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ],...
The captured IQ segment records transmitter identifier Mavic2AirS and the observed status is the label Flying for model training.
When the activity state is Flying, which emitting transmitter produced the signal for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.77734375, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.70751953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], ...
The received signal record records transmitter identifier Mavic2AirS while the flight condition is the flight state Flying for this IQ window.
For the current mode Flying, please provide the transmitter identifier for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.2294921875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.45751953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.2294921875, -0.978515625 ], ...
The received signal record records transmitter identifier Mavic2AirS and the status field reads the operating mode Flying in the processed record.
For this Flying observation, what is the transmitter ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.216796875 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.05810546875 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], ...
This DroneDetect sample assigns transmitter code Mavic2AirS while the activity state Flying in the processed record.
For this Flying observation, which transmitter code matches the signal for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.33837890625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.2626953125 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ]...
The current telemetry entry comes from transmitter Mavic2AirS and the Flying state in the labeled example.
For an IQ segment marked Flying, what is the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.20458984375, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.52001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ]...
The analyzed transmission marks Mavic2AirS as the transmitter and the status field reads a Flying condition in the dataset.
When the activity state is Flying, what is the source transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 0.77001953125, 1.02099609375 ], [ 1.02001953125, 0.0419921875 ], [ 0.87158203125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.435546875 ], [ -0.47998046875, 1.02099609375 ], ...
The received signal record records transmitter identifier Mavic2AirS and the observed status is the activity state Flying for model training.
For the current mode Flying, which transmitter identifier fits this observation for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.53564453125, -0.978515625 ], [ -0.9794921875, -0.12646484375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.0888671875 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ]...
The captured IQ segment marks Mavic2AirS as the transmitter under a recorded state of the Flying state for this IQ window.
For this Flying observation, what transmitter ID is associated with the capture for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.5341796875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.46533203125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.1591796875, 1.02099609375 ],...
This RF capture comes from transmitter Mavic2AirS and the recorded status Flying.
For a signal in Flying state, please provide the transmitter identifier for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.9541015625 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ],...
The recorded drone signal uses transmitter ID Mavic2AirS with the signal showing a Flying condition for the current observation.
For the current mode Flying, what is the transmitting unit ID for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.021484375 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.04833984375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ],...
The signal observation reports the source as Mavic2AirS with the operating condition set to the activity state Flying in the labeled example.
With the drone status known as Flying, which transmitter code should be selected for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.47998046875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.05908203125, -0.978515625 ], [ -0.9794921875, -0.978515625 ],...
The signal observation is associated with transmitter Mavic2AirS while the flight condition is the label Flying in the signal log.
For this Flying observation, can you identify the transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.9775390625, -0.978515625 ], [ -0.9794921875, -0.86767578125 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ]...
The monitoring log is associated with transmitter Mavic2AirS while the label Flying for this sample.
In a sample labeled Flying, which transmitter identifier fits this observation for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.42578125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.77490234375, -0.978515625 ], [ -0.9794921875, -0.4853515625 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], ...
The current telemetry entry assigns transmitter code Mavic2AirS and the label Flying for this IQ window.
In a sample labeled Flying, what source transmitter is indicated for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.61376953125, 0.5732421875 ], [ 0.6923828125, -0.1357421875 ], [ 0.17236328125, -0.52001953125 ], [ -0.375, -0.2900390625 ], [ -0.42041015625, 0.23388671875 ], [ -0.02490234375, 0.49658203125 ], [ 0.32080078125, 0.306640625 ], [ ...
This dataset item marks Mavic2AirS as the transmitter and the observed status is the operating mode Flying in the dataset.
In a sample labeled Flying, what transmitter identifier should be used for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.04296875 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.5693359375 ], [ 1.02001953125, -0.978515625 ], [...
This dataset item reports the source as Mavic2AirS and the observed status is status Flying in the processed record.
For a signal in Flying state, what transmitter identifier should be used for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.455078125, -0.94140625 ], [ -0.5302734375, -0.92138671875 ], [ -0.9794921875, -0.0751953125 ], [ -0.87646484375, 1.02099609375 ], [ 0.32080078125, 1.02099609375 ], [ 1.02001953125, 0.71875 ], [ 1.02001953125, -0.8173828125 ], [ ...
The analyzed transmission assigns transmitter code Mavic2AirS under a recorded state of the Flying state in the labeled example.
For an IQ segment marked Flying, what source device ID should be returned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.13232421875, -0.978515625 ], [ -0.9794921875, -0.841796875 ], [ -0.9794921875, 0.6787109375 ], [ -0.26220703125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.228515625 ], [ 0.6796875, -0.978515625 ], [ ...
The received signal record points to source transmitter Mavic2AirS and the operating mode Flying in the processed record.
For a signal in Flying state, which emitting transmitter produced the signal for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.958984375 ], [ 0.40478515625, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.8896484375 ], [ -0.32568359375, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.4599609375 ],...
The recorded drone signal points to source transmitter Mavic2AirS while the flight condition is status Flying in the labeled example.
Given status Flying, please provide the transmitter identifier for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.69677734375 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.8173828125 ], [ -0.9794921875, 1.02099609375 ]...
This dataset item marks Mavic2AirS as the transmitter with the operating condition set to the Flying state in the labeled example.
For a signal in Flying state, what transmitter ID is associated with the capture for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.89208984375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.796875 ], ...
The received signal record lists the transmitter as Mavic2AirS with the operating condition set to the flight state Flying for this sample.
For an IQ segment marked Flying, what transmitter label should be recorded for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.27099609375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.0888671875 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], ...
The received signal record comes from transmitter Mavic2AirS while Flying in the dataset.
For the current mode Flying, which transmitter identifier fits this observation for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 0.77099609375 ], [ -0.63671875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.8173828125 ], [ 0.4462890625, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], ...
This RF capture is associated with transmitter Mavic2AirS with the signal showing the current mode Flying for this IQ window.
In a sample labeled Flying, what is the transmitter ID for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 0.02197265625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.27099609375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.20166015625 ...
This RF capture records transmitter identifier Mavic2AirS where the drone state is the current mode Flying for the current observation.
For an IQ segment marked Flying, which transmitter identifier fits this observation for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.77001953125, 1.02099609375 ], [ 1.02001953125, 0.3779296875 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.2001953125 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ],...
The current telemetry entry points to source transmitter Mavic2AirS and the status field reads the flight state Flying in the dataset.
In a sample labeled Flying, which source transmitter should be assigned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.41845703125 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ]...
The monitoring log identifies transmitter Mavic2AirS while the flight condition is Flying in the processed record.
When the activity state is Flying, what source device ID should be returned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.2578125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.39599609375, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.541015625, 1.02099609375 ], [...
The recorded drone signal records transmitter identifier Mavic2AirS and the observed status is the activity state Flying in the signal log.
For the current mode Flying, which transmitter code should be selected for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ -0.79248046875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ]...
The monitoring log marks Mavic2AirS as the transmitter under a recorded state of the activity state Flying for the current observation.
In a sample labeled Flying, what is the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.919921875, -0.2978515625 ], [ 0.3056640625, -0.978515625 ], [ -0.81591796875, -0.87158203125 ], [ -0.9794921875, 0.3330078125 ], [ -0.60595703125, 1.02099609375 ], [ 1.01220703125, 1.02099609375 ], [ 1.02001953125, 0.0478515625 ],...
This RF capture uses transmitter ID Mavic2AirS with the operating condition set to the operating mode Flying for model training.
For this Flying observation, which transmitter ID should be reported for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 0.77099609375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.228515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.4501953125 ], ...
The current telemetry entry reports the source as Mavic2AirS and the status field reads a Flying condition in this capture.
With the drone status known as Flying, which transmitter ID should be reported for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ],...
The analyzed transmission points to source transmitter Mavic2AirS while the label Flying for this IQ window.
Given status Flying, which transmitter ID should be reported for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.42236328125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.04443359375, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.19140625, 1.02099609375 ], ...
The captured IQ segment points to source transmitter Mavic2AirS with status classified as the recorded status Flying for the current observation.
For an IQ segment marked Flying, what source device ID should be returned for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.77197265625, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.61328125 ], [ 0.74365234375, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.951171875 ], [ -0.47998046875, 1.02099609375 ], ...
This DroneDetect sample identifies transmitter Mavic2AirS where the drone state is the Flying state in the labeled example.
When the activity state is Flying, which transmitter ID should be reported for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.45263671875, 0.5 ], [ 0.625, 0.05419921875 ], [ 0.427734375, -0.30517578125 ], [ 0.013671875, -0.431640625 ], [ -0.39501953125, -0.26220703125 ], [ -0.5673828125, 0.19482421875 ], [ -0.302734375, 0.6982421875 ], [ 0.33837890...
The current telemetry entry comes from transmitter Mavic2AirS under a recorded state of the operating mode Flying for the current observation.
When the activity state is Flying, which transmitter value belongs to the record for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.712890625 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.94384765625, -0.978515625 ],...
This DroneDetect sample uses transmitter ID Mavic2AirS while status Flying for this IQ window.
When the activity state is Flying, what is the source transmitter ID for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.478515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.52099609375 ], [ -0.9794921875, 1.02099609375 ],...
The captured IQ segment comes from transmitter Mavic2AirS and the status field reads the label Flying for model training.
When the recorded status is Flying, what source device ID should be returned for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.77001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ],...
The monitoring log reports the source as Mavic2AirS where the drone state is the label Flying for model training.
Given status Flying, which RF source ID corresponds to the sample for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.3125 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.23974609375 ], [ -0.9794921875, 1.02099609375 ], [ ...
The signal observation is associated with transmitter Mavic2AirS with the operating condition set to Flying for this IQ window.
For an IQ segment marked Flying, which transmitter value belongs to the record for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.228515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.4033203125 ], [ -0.9794921875, 1.02099609375 ], ...
This dataset item marks Mavic2AirS as the transmitter and the status field reads a Flying condition for model training.
When the recorded status is Flying, what transmitter identifier should be used for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.7373046875 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ]...
The captured IQ segment points to source transmitter Mavic2AirS with status classified as the recorded status Flying for the current observation.
Given status Flying, what source transmitter is indicated for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.0380859375, -0.978515625 ], [ -0.9794921875, -0.9345703125 ], [ -0.9794921875, 1.02099609375 ], [ 0.06298828125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.798828125 ],...
This RF capture marks Mavic2AirS as the transmitter with the signal showing the current mode Flying in the labeled example.
Using the status value Flying, what is the transmitting unit ID for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ -0.07763671875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.55029296875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.90185546875 ]...
The current telemetry entry assigns transmitter code Mavic2AirS under a recorded state of the flight state Flying for this IQ window.
With the drone status known as Flying, which emitting transmitter produced the signal for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.5712890625 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.23388671875 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.412109375 ], ...
This RF capture marks Mavic2AirS as the transmitter and the observed status is the Flying state in the labeled example.
When the recorded status is Flying, which RF source ID corresponds to the sample for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.62255859375, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.57421875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.25244140625, 1.02099609375 ], ...
The signal observation is associated with transmitter Mavic2AirS while the flight condition is the activity state Flying for this IQ window.
For the current mode Flying, which transmitter code should be selected for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03466796875, -0.978515625 ], [ -0.859375, -0.517578125 ], [ -0.85107421875, 0.421875 ], [ -0.20166015625, 0.88037109375 ], [ 0.45703125, 0.703125 ], [ 0.72900390625, 0.1982421875 ], [ 0.58349609375, -0.2744140625 ], [ 0.1782...
The monitoring log identifies transmitter Mavic2AirS and the observed status is the Flying state for this IQ window.
When the recorded status is Flying, which transmitter ID should be reported for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 0.05078125 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.02587890625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.3330078125 ], ...
The recorded drone signal comes from transmitter Mavic2AirS with the operating condition set to status Flying in the labeled example.
When the activity state is Flying, can you identify the transmitter ID for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.20458984375, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.59326171875, -0.978515625 ], [ -0.9794921875, -0.978515625 ],...
This RF capture comes from transmitter Mavic2AirS while the Flying state.
For an IQ segment marked Flying, what is the transmitting unit ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.11328125 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.08984375 ], [ 1.02001953125, -0.978515625 ], [ ...
The analyzed transmission lists the transmitter as Mavic2AirS where the drone state is the Flying state in this capture.
When the activity state is Flying, please determine the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.228515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.77099609375 ], [ -0.9794921875, 1.02099609375 ],...
The signal observation is associated with transmitter Mavic2AirS while the flight condition is status Flying in this capture.
When the recorded status is Flying, which transmitter code should be selected for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 0.021484375 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.27099609375 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.228515625 ], ...
The captured IQ segment records transmitter identifier Mavic2AirS and the status field reads a Flying condition for this sample.
For this Flying observation, which source transmitter should be assigned for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.10546875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.47998046875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.33740234375, -0.978515625 ], ...
This RF capture identifies transmitter Mavic2AirS where the drone state is the label Flying in this capture.
In a sample labeled Flying, can you identify the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.2392578125 ], [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, 0.5888671875 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], ...
The captured IQ segment uses transmitter ID Mavic2AirS while a Flying condition in the dataset.
For the current mode Flying, what is the transmitter ID for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.43896484375, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.57861328125 ], [ -0.47998046875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.4892578125 ], [ 0.72412109375, -0.978515625 ]...
The signal observation reports the source as Mavic2AirS with the signal showing the flight state Flying in the processed record.
In a sample labeled Flying, what is the transmitting unit ID for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, -0.3525390625 ], [ -0.9794921875, 1.02099609375 ], [ 0.77001953125, 1.02099609375 ], [ 1.02001953125, 0.92041015625 ], [ 1.02001953125, -0.978515625 ],...
The monitoring log assigns transmitter code Mavic2AirS with the signal showing Flying in the labeled example.
For a signal in Flying state, please provide the transmitter identifier for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.8564453125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.228515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.2685546875 ], [ -0.9794921875, 1.02099609375 ], ...
The signal observation is associated with transmitter Mavic2AirS and a Flying condition for this IQ window.
In a sample labeled Flying, what source transmitter is indicated for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.20751953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.02001953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ],...
The signal observation assigns transmitter code Mavic2AirS where the drone state is the Flying state in the signal log.
When the recorded status is Flying, what transmitter label should be recorded for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ 0.32373046875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.03564453125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ],...
The received signal record marks Mavic2AirS as the transmitter and the status field reads the label Flying in this capture.
Given status Flying, please determine the transmitter ID for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.228515625 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.77099609375 ], [ -0.9794921875, 1.02099609375 ],...
The analyzed transmission identifies transmitter Mavic2AirS while the flight condition is the label Flying for this sample.
Using the status value Flying, what is the transmitting unit ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.35302734375, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ 0.11376953125, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ], [ -0.43115234375, -0.978515625 ],...
This DroneDetect sample comes from transmitter Mavic2AirS under a recorded state of the label Flying for model training.
With the drone status known as Flying, what is the transmitting unit ID for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ -0.9794921875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.4658203125 ], [ 1.02001953125, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 0.52099609375 ], [ -0.9794921875, 1.02099609375 ]...
This DroneDetect sample is associated with transmitter Mavic2AirS while the flight condition is the label Flying for model training.
When the activity state is Flying, what is the source transmitter ID for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 1.02001953125, -0.978515625 ], [ 0.50732421875, -0.978515625 ], [ -0.9794921875, -0.978515625 ], [ -0.9794921875, 1.02099609375 ], [ -0.79248046875, 1.02099609375 ], [ 1.02001953125, 1.02099609375 ], [ 1.02001953125, -0.978515625 ],...
This RF capture is associated with transmitter Mavic2AirS and the observed status is the recorded status Flying for this sample.
With the drone status known as Flying, please determine the transmitter ID for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0625, 0.09814453125 ], [ 0.04931640625, 0.08935546875 ], [ 0.03271484375, 0.07958984375 ], [ 0.03857421875, 0.087890625 ], [ 0.05322265625, 0.08642578125 ], [ 0.04833984375, 0.08154296875 ], [ 0.02587890625, 0.08447265625 ], [ ...
The received signal record comes from transmitter Mavic2AirS where the drone state is the activity state Flying in the dataset.
For the current mode Flying, which transmitter identifier fits this observation for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03515625, 0.08154296875 ], [ 0.04296875, 0.06982421875 ], [ 0.04541015625, 0.08984375 ], [ 0.03515625, 0.1025390625 ], [ 0.02880859375, 0.09130859375 ], [ 0.03759765625, 0.06982421875 ], [ 0.044921875, 0.0693359375 ], [ 0.04...
This RF capture uses transmitter ID Mavic2AirS and the status field reads the activity state Flying in the dataset.
For the current mode Flying, what source transmitter is indicated for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0361328125, 0.0791015625 ], [ 0.02978515625, 0.076171875 ], [ 0.0400390625, 0.080078125 ], [ 0.05078125, 0.0810546875 ], [ 0.05712890625, 0.0888671875 ], [ 0.05859375, 0.10546875 ], [ 0.05712890625, 0.09375 ], [ 0.056640625,...
The monitoring log assigns transmitter code Mavic2AirS with the signal showing the activity state Flying for the current observation.
Using the status value Flying, what transmitting unit should be labeled for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.0791015625 ], [ 0.052734375, 0.076171875 ], [ 0.06396484375, 0.09765625 ], [ 0.0634765625, 0.1005859375 ], [ 0.04443359375, 0.0712890625 ], [ 0.04443359375, 0.0498046875 ], [ 0.05810546875, 0.05859375 ], [ 0.0...
This DroneDetect sample lists the transmitter as Mavic2AirS with the signal showing status Flying in the processed record.
For the current mode Flying, can you identify the transmitter ID for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05712890625, 0.087890625 ], [ 0.05126953125, 0.076171875 ], [ 0.0478515625, 0.07080078125 ], [ 0.04541015625, 0.08740234375 ], [ 0.0400390625, 0.1005859375 ], [ 0.03564453125, 0.10107421875 ], [ 0.0517578125, 0.0810546875 ], [ ...
The recorded drone signal is associated with transmitter Mavic2AirS under a recorded state of the current mode Flying in the labeled example.
In a sample labeled Flying, what is the transmitter ID for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0703125, 0.107421875 ], [ 0.06103515625, 0.09326171875 ], [ 0.033203125, 0.0732421875 ], [ 0.03271484375, 0.06298828125 ], [ 0.05615234375, 0.068359375 ], [ 0.0654296875, 0.0859375 ], [ 0.04833984375, 0.099609375 ], [ 0.0439...
The analyzed transmission assigns transmitter code Mavic2AirS under a recorded state of the operating mode Flying for the current observation.
When the recorded status is Flying, please determine the transmitter ID for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0478515625, 0.08154296875 ], [ 0.04736328125, 0.09326171875 ], [ 0.05078125, 0.0986328125 ], [ 0.05615234375, 0.09033203125 ], [ 0.05224609375, 0.07861328125 ], [ 0.0390625, 0.07958984375 ], [ 0.03564453125, 0.0908203125 ], [ ...
The monitoring log assigns transmitter code Mavic2AirS and the status field reads status Flying.
For a signal in Flying state, what source device ID should be returned for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.052734375, 0.0869140625 ], [ 0.046875, 0.087890625 ], [ 0.0244140625, 0.07421875 ], [ 0.03466796875, 0.0654296875 ], [ 0.0654296875, 0.0791015625 ], [ 0.0634765625, 0.087890625 ], [ 0.0341796875, 0.07177734375 ], [ 0.0268554...
The current telemetry entry marks Mavic2AirS as the transmitter while the flight condition is the activity state Flying for the current observation.
In a sample labeled Flying, which transmitter code should be selected for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.052734375, 0.078125 ], [ 0.0390625, 0.0625 ], [ 0.04736328125, 0.08203125 ], [ 0.06103515625, 0.11328125 ], [ 0.05029296875, 0.11083984375 ], [ 0.03955078125, 0.0732421875 ], [ 0.05224609375, 0.06640625 ], [ 0.0625, 0.08...
This DroneDetect sample lists the transmitter as Mavic2AirS with the operating condition set to status Flying.
In a sample labeled Flying, what is the transmitting unit ID for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05615234375, 0.08984375 ], [ 0.0517578125, 0.0888671875 ], [ 0.041015625, 0.08935546875 ], [ 0.0546875, 0.08447265625 ], [ 0.05859375, 0.0791015625 ], [ 0.0478515625, 0.08447265625 ], [ 0.05224609375, 0.08544921875 ], [ 0.06...
This dataset item uses transmitter ID Mavic2AirS with the operating condition set to status Flying in the labeled example.
In a sample labeled Flying, what source transmitter is indicated for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.08984375 ], [ 0.02783203125, 0.0810546875 ], [ 0.03125, 0.0810546875 ], [ 0.04052734375, 0.0927734375 ], [ 0.04541015625, 0.08349609375 ], [ 0.04833984375, 0.0654296875 ], [ 0.041015625, 0.0595703125 ], [ 0.04...
This RF capture marks Mavic2AirS as the transmitter and the observed status is the Flying state in the labeled example.
Given status Flying, which transmitter code should be selected for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05908203125, 0.1044921875 ], [ 0.0654296875, 0.0849609375 ], [ 0.05322265625, 0.076171875 ], [ 0.04736328125, 0.07763671875 ], [ 0.0556640625, 0.07861328125 ], [ 0.05078125, 0.078125 ], [ 0.03662109375, 0.08154296875 ], [ 0....
The signal observation points to source transmitter Mavic2AirS with the operating condition set to the Flying state in the signal log.
For this Flying observation, which transmitter value belongs to the record for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.0869140625 ], [ 0.06103515625, 0.0693359375 ], [ 0.0634765625, 0.076171875 ], [ 0.04150390625, 0.10498046875 ], [ 0.03466796875, 0.10888671875 ], [ 0.05126953125, 0.083984375 ], [ 0.05419921875, 0.0732421875 ], [ ...
The analyzed transmission marks Mavic2AirS as the transmitter while the flight condition is the operating mode Flying for this IQ window.
For an IQ segment marked Flying, what transmitter label should be recorded for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04736328125, 0.0771484375 ], [ 0.072265625, 0.0791015625 ], [ 0.07177734375, 0.1015625 ], [ 0.04638671875, 0.10888671875 ], [ 0.04052734375, 0.10009765625 ], [ 0.05615234375, 0.0986328125 ], [ 0.04638671875, 0.1005859375 ], [ ...
The recorded drone signal is associated with transmitter Mavic2AirS under a recorded state of the Flying state for this IQ window.
For the current mode Flying, please provide the transmitter identifier for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03955078125, 0.1015625 ], [ 0.0546875, 0.1162109375 ], [ 0.044921875, 0.10498046875 ], [ 0.02880859375, 0.0849609375 ], [ 0.033203125, 0.08203125 ], [ 0.03955078125, 0.0791015625 ], [ 0.04833984375, 0.08154296875 ], [ 0.0585...
The captured IQ segment records transmitter identifier Mavic2AirS with the operating condition set to a Flying condition for this IQ window.
When the activity state is Flying, can you identify the transmitter ID for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.02099609375, 0.0771484375 ], [ 0.0322265625, 0.07568359375 ], [ 0.048828125, 0.0966796875 ], [ 0.044921875, 0.10400390625 ], [ 0.0361328125, 0.0888671875 ], [ 0.046875, 0.0791015625 ], [ 0.05810546875, 0.08251953125 ], [ 0.0...
The analyzed transmission lists the transmitter as Mavic2AirS with the operating condition set to a Flying condition in the dataset.
For an IQ segment marked Flying, please determine the transmitter ID for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0361328125, 0.0947265625 ], [ 0.03271484375, 0.0966796875 ], [ 0.05615234375, 0.07080078125 ], [ 0.06787109375, 0.0556640625 ], [ 0.04443359375, 0.0791015625 ], [ 0.03271484375, 0.0986328125 ], [ 0.04052734375, 0.08447265625 ], ...
The signal observation marks Mavic2AirS as the transmitter with the operating condition set to the Flying state in the labeled example.
For an IQ segment marked Flying, which transmitter code matches the signal for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.052734375, 0.060546875 ], [ 0.05615234375, 0.072265625 ], [ 0.048828125, 0.09375 ], [ 0.0341796875, 0.1083984375 ], [ 0.02099609375, 0.09912109375 ], [ 0.033203125, 0.0732421875 ], [ 0.06298828125, 0.0615234375 ], [ 0.067871...
The received signal record marks Mavic2AirS as the transmitter with the operating condition set to Flying for model training.
When the recorded status is Flying, what transmitting unit should be labeled for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.05859375 ], [ 0.06396484375, 0.041015625 ], [ 0.03369140625, 0.0693359375 ], [ 0.00732421875, 0.09423828125 ], [ 0.041015625, 0.080078125 ], [ 0.06640625, 0.06298828125 ], [ 0.04833984375, 0.07861328125 ], [ 0...
This DroneDetect sample is associated with transmitter Mavic2AirS with the signal showing the Flying state in this capture.
With the drone status known as Flying, what transmitter label should be recorded for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.033203125, 0.09912109375 ], [ 0.03271484375, 0.0927734375 ], [ 0.05712890625, 0.0830078125 ], [ 0.05224609375, 0.08349609375 ], [ 0.02490234375, 0.0791015625 ], [ 0.02392578125, 0.076171875 ], [ 0.04736328125, 0.08349609375 ], [...
This dataset item lists the transmitter as Mavic2AirS with the signal showing the flight state Flying in the signal log.
For this Flying observation, what source transmitter is indicated for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.02197265625, 0.0849609375 ], [ 0.04541015625, 0.0751953125 ], [ 0.06640625, 0.0888671875 ], [ 0.06396484375, 0.095703125 ], [ 0.05908203125, 0.0908203125 ], [ 0.05517578125, 0.0810546875 ], [ 0.041015625, 0.07470703125 ], [ ...
The captured IQ segment marks Mavic2AirS as the transmitter under a recorded state of status Flying for the current observation.
When the recorded status is Flying, what is the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06689453125, 0.1015625 ], [ 0.0322265625, 0.1005859375 ], [ 0.025390625, 0.0927734375 ], [ 0.04296875, 0.07958984375 ], [ 0.0517578125, 0.0810546875 ], [ 0.0439453125, 0.08642578125 ], [ 0.02978515625, 0.09033203125 ], [ 0.0...
The monitoring log marks Mavic2AirS as the transmitter under a recorded state of the activity state Flying for the current observation.
When the recorded status is Flying, what transmitting unit should be labeled for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0517578125, 0.08447265625 ], [ 0.03564453125, 0.0927734375 ], [ 0.02783203125, 0.0849609375 ], [ 0.0244140625, 0.0712890625 ], [ 0.03564453125, 0.06591796875 ], [ 0.05224609375, 0.083984375 ], [ 0.05078125, 0.0908203125 ], [ ...
The monitoring log lists the transmitter as Mavic2AirS while the flight condition is the operating mode Flying in the dataset.
Using the status value Flying, which transmitter code should be selected for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03125, 0.0869140625 ], [ 0.04638671875, 0.08544921875 ], [ 0.05029296875, 0.10009765625 ], [ 0.03173828125, 0.10498046875 ], [ 0.0322265625, 0.083984375 ], [ 0.0478515625, 0.06298828125 ], [ 0.05615234375, 0.06591796875 ], [ ...
The recorded drone signal identifies transmitter Mavic2AirS and Flying in the signal log.
For an IQ segment marked Flying, which transmitter value belongs to the record for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05029296875, 0.0810546875 ], [ 0.02099609375, 0.07470703125 ], [ 0.02392578125, 0.0703125 ], [ 0.0517578125, 0.0849609375 ], [ 0.048828125, 0.09228515625 ], [ 0.0205078125, 0.0908203125 ], [ 0.02392578125, 0.0947265625 ], [ ...
The current telemetry entry records transmitter identifier Mavic2AirS while Flying in this capture.
In a sample labeled Flying, what source transmitter is indicated for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.01171875, 0.07861328125 ], [ 0.02490234375, 0.09765625 ], [ 0.041015625, 0.09423828125 ], [ 0.04345703125, 0.0869140625 ], [ 0.05224609375, 0.09619140625 ], [ 0.06591796875, 0.10498046875 ], [ 0.048828125, 0.1005859375 ], [ ...
The captured IQ segment points to source transmitter Mavic2AirS while the flight condition is the activity state Flying in the dataset.
With the drone status known as Flying, which transmitter code should be selected for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04296875, 0.099609375 ], [ 0.04736328125, 0.1103515625 ], [ 0.0546875, 0.0830078125 ], [ 0.0634765625, 0.0703125 ], [ 0.05908203125, 0.09375 ], [ 0.04150390625, 0.10205078125 ], [ 0.03662109375, 0.0849609375 ], [ 0.051269531...
The signal observation lists the transmitter as Mavic2AirS while a Flying condition in the processed record.
For a signal in Flying state, which source transmitter should be assigned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03564453125, 0.1103515625 ], [ 0.06591796875, 0.08837890625 ], [ 0.07421875, 0.0791015625 ], [ 0.06005859375, 0.10107421875 ], [ 0.0517578125, 0.1044921875 ], [ 0.05126953125, 0.08544921875 ], [ 0.0478515625, 0.076171875 ], [ ...
The current telemetry entry assigns transmitter code Mavic2AirS with the operating condition set to the current mode Flying in the processed record.
When the activity state is Flying, which source transmitter should be assigned for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03955078125, 0.07861328125 ], [ 0.05029296875, 0.07763671875 ], [ 0.02978515625, 0.068359375 ], [ 0.02001953125, 0.0634765625 ], [ 0.04052734375, 0.0615234375 ], [ 0.07080078125, 0.0634765625 ], [ 0.06494140625, 0.0849609375 ], ...
This dataset item assigns transmitter code Mavic2AirS while the flight condition is the label Flying in the labeled example.
For an IQ segment marked Flying, which transmitter value belongs to the record for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying