Datasets:

iq
array 2D
Prompt
stringlengths
71
162
qa
stringlengths
64
126
center_frequency
stringclasses
1 value
bandwidth
stringclasses
1 value
sample_rate
stringclasses
1 value
transmitter_id
class label
2 classes
status
class label
3 classes
[ [ 0.060546875, 0.10498046875 ], [ 0.05517578125, 0.076171875 ], [ 0.0517578125, 0.0556640625 ], [ 0.0625, 0.07861328125 ], [ 0.05810546875, 0.09765625 ], [ 0.03173828125, 0.083984375 ], [ 0.01611328125, 0.0634765625 ], [ 0.03320...
This DroneDetect sample lists the transmitter as Mavic2AirS and the status field reads the activity state Flying.
In a sample labeled Flying, can you identify the transmitter ID for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.056640625, 0.0703125 ], [ 0.06005859375, 0.08935546875 ], [ 0.03515625, 0.11328125 ], [ 0.02001953125, 0.0947265625 ], [ 0.04248046875, 0.0693359375 ], [ 0.076171875, 0.07666015625 ], [ 0.07421875, 0.09033203125 ], [ 0.04785...
This RF capture reports the source as Mavic2AirS where the drone state is the flight state Flying for the current observation.
For an IQ segment marked Flying, which transmitter code matches the signal for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0390625, 0.0908203125 ], [ 0.04931640625, 0.107421875 ], [ 0.0439453125, 0.095703125 ], [ 0.04052734375, 0.06982421875 ], [ 0.05712890625, 0.0634765625 ], [ 0.05712890625, 0.08984375 ], [ 0.03857421875, 0.1015625 ], [ 0.0405...
The monitoring log lists the transmitter as Mavic2AirS with status classified as the current mode Flying in the dataset.
For a signal in Flying state, what is the transmitting unit ID for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05322265625, 0.06591796875 ], [ 0.06298828125, 0.064453125 ], [ 0.04296875, 0.07470703125 ], [ 0.02685546875, 0.08642578125 ], [ 0.04296875, 0.0869140625 ], [ 0.05517578125, 0.08251953125 ], [ 0.056640625, 0.080078125 ], [ 0...
This dataset item is associated with transmitter Mavic2AirS with status classified as the label Flying for the current observation.
Given status Flying, what source transmitter is indicated for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0244140625, 0.0966796875 ], [ 0.0439453125, 0.08349609375 ], [ 0.06103515625, 0.0927734375 ], [ 0.05908203125, 0.091796875 ], [ 0.04345703125, 0.0576171875 ], [ 0.03662109375, 0.0498046875 ], [ 0.046875, 0.08935546875 ], [ 0...
The analyzed transmission identifies transmitter Mavic2AirS while the flight condition is the label Flying for this sample.
When the recorded status is Flying, what transmitter label should be recorded for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.08203125 ], [ 0.02490234375, 0.09033203125 ], [ 0.02001953125, 0.07275390625 ], [ 0.046875, 0.0654296875 ], [ 0.08203125, 0.0830078125 ], [ 0.08203125, 0.095703125 ], [ 0.04443359375, 0.091796875 ], [ 0.018554...
The captured IQ segment reports the source as Mavic2AirS while the flight condition is status Flying for the current observation.
When the activity state is Flying, what transmitter identifier should be used for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.033203125, 0.0537109375 ], [ 0.03271484375, 0.0654296875 ], [ 0.02490234375, 0.09765625 ], [ 0.02880859375, 0.09033203125 ], [ 0.05224609375, 0.068359375 ], [ 0.052734375, 0.0703125 ], [ 0.02783203125, 0.078125 ], [ 0.033203...
The current telemetry entry points to source transmitter Mavic2AirS and the observed status is the operating mode Flying in the signal log.
Given status Flying, which transmitter identifier fits this observation for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.0791015625 ], [ 0.03759765625, 0.09765625 ], [ 0.05078125, 0.07861328125 ], [ 0.06103515625, 0.06591796875 ], [ 0.04296875, 0.0810546875 ], [ 0.02294921875, 0.0869140625 ], [ 0.03857421875, 0.08056640625 ], [ ...
The monitoring log records transmitter identifier Mavic2AirS with status classified as the current mode Flying.
Using the status value Flying, which source transmitter should be assigned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04296875, 0.08544921875 ], [ 0.041015625, 0.08935546875 ], [ 0.05810546875, 0.091796875 ], [ 0.06298828125, 0.087890625 ], [ 0.05322265625, 0.07470703125 ], [ 0.06201171875, 0.072265625 ], [ 0.07470703125, 0.0771484375 ], [ ...
The signal observation uses transmitter ID Mavic2AirS with status classified as the flight state Flying for this IQ window.
In a sample labeled Flying, what transmitter label should be recorded for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.037109375, 0.07861328125 ], [ 0.0556640625, 0.0859375 ], [ 0.05615234375, 0.09765625 ], [ 0.04443359375, 0.0927734375 ], [ 0.044921875, 0.078125 ], [ 0.04833984375, 0.07470703125 ], [ 0.04345703125, 0.0810546875 ], [ 0.03955...
The current telemetry entry points to source transmitter Mavic2AirS and the observed status is the operating mode Flying in the signal log.
When the recorded status is Flying, what source device ID should be returned for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05224609375, 0.0869140625 ], [ 0.05029296875, 0.08837890625 ], [ 0.03955078125, 0.08984375 ], [ 0.04052734375, 0.09619140625 ], [ 0.05029296875, 0.0966796875 ], [ 0.0390625, 0.0888671875 ], [ 0.01904296875, 0.0908203125 ], [ ...
The recorded drone signal uses transmitter ID Mavic2AirS while the current mode Flying in the labeled example.
Using the status value Flying, what source transmitter is indicated for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05029296875, 0.10107421875 ], [ 0.05908203125, 0.08935546875 ], [ 0.04833984375, 0.0625 ], [ 0.0322265625, 0.05712890625 ], [ 0.04052734375, 0.08154296875 ], [ 0.05322265625, 0.07861328125 ], [ 0.048828125, 0.064453125 ], [ ...
The current telemetry entry is associated with transmitter Mavic2AirS while the Flying state in this capture.
Using the status value Flying, what transmitter identifier should be used for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05712890625, 0.0986328125 ], [ 0.05615234375, 0.095703125 ], [ 0.04052734375, 0.0888671875 ], [ 0.02294921875, 0.09033203125 ], [ 0.02490234375, 0.10302734375 ], [ 0.05615234375, 0.103515625 ], [ 0.06689453125, 0.08935546875 ], ...
The recorded drone signal is associated with transmitter Mavic2AirS under a recorded state of the current mode Flying in the labeled example.
When the recorded status is Flying, can you identify the transmitter ID for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05615234375, 0.0869140625 ], [ 0.07080078125, 0.0849609375 ], [ 0.05029296875, 0.07470703125 ], [ 0.03271484375, 0.05615234375 ], [ 0.06396484375, 0.0478515625 ], [ 0.08740234375, 0.0673828125 ], [ 0.05615234375, 0.091796875 ], ...
This dataset item records transmitter identifier Mavic2AirS with status classified as the Flying state in the labeled example.
In a sample labeled Flying, which emitting transmitter produced the signal for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.056640625, 0.080078125 ], [ 0.03759765625, 0.0888671875 ], [ 0.02099609375, 0.09375 ], [ 0.046875, 0.09375 ], [ 0.06005859375, 0.09326171875 ], [ 0.03759765625, 0.07958984375 ], [ 0.03271484375, 0.06982421875 ], [ 0.05322265...
The current telemetry entry is associated with transmitter Mavic2AirS with the operating condition set to Flying for this IQ window.
When the activity state is Flying, please determine the transmitter ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04345703125, 0.099609375 ], [ 0.04345703125, 0.10498046875 ], [ 0.03662109375, 0.0869140625 ], [ 0.02978515625, 0.08154296875 ], [ 0.04248046875, 0.1064453125 ], [ 0.05322265625, 0.111328125 ], [ 0.05615234375, 0.08154296875 ], ...
The captured IQ segment points to source transmitter Mavic2AirS while the flight condition is the activity state Flying in the dataset.
For the current mode Flying, what source transmitter is indicated for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.044921875, 0.06591796875 ], [ 0.048828125, 0.0625 ], [ 0.04638671875, 0.0927734375 ], [ 0.03515625, 0.1044921875 ], [ 0.0419921875, 0.07861328125 ], [ 0.0478515625, 0.06884765625 ], [ 0.03662109375, 0.087890625 ], [ 0.030761...
The recorded drone signal is associated with transmitter Mavic2AirS under a recorded state of the current mode Flying in the labeled example.
For a signal in Flying state, please provide the transmitter identifier for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03515625, 0.0732421875 ], [ 0.06298828125, 0.08349609375 ], [ 0.06689453125, 0.1123046875 ], [ 0.037109375, 0.11767578125 ], [ 0.0322265625, 0.0888671875 ], [ 0.05078125, 0.07275390625 ], [ 0.05224609375, 0.0849609375 ], [ 0...
The received signal record marks Mavic2AirS as the transmitter and the status field reads the label Flying in this capture.
Using the status value Flying, please determine the transmitter ID for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03369140625, 0.08740234375 ], [ 0.04833984375, 0.08154296875 ], [ 0.05517578125, 0.0908203125 ], [ 0.04541015625, 0.09814453125 ], [ 0.04345703125, 0.0947265625 ], [ 0.05517578125, 0.08642578125 ], [ 0.05615234375, 0.08203125 ], ...
The analyzed transmission uses transmitter ID Mavic2AirS with status classified as status Flying in this capture.
For the current mode Flying, what transmitter identifier should be used for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05322265625, 0.10546875 ], [ 0.052734375, 0.0966796875 ], [ 0.05615234375, 0.0673828125 ], [ 0.056640625, 0.05859375 ], [ 0.05029296875, 0.078125 ], [ 0.0400390625, 0.0859375 ], [ 0.05419921875, 0.0791015625 ], [ 0.072265625...
The current telemetry entry records transmitter identifier Mavic2AirS and the Flying state in this capture.
With the drone status known as Flying, which emitting transmitter produced the signal for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03759765625, 0.0830078125 ], [ 0.046875, 0.08642578125 ], [ 0.0517578125, 0.08544921875 ], [ 0.056640625, 0.087890625 ], [ 0.06787109375, 0.08056640625 ], [ 0.06689453125, 0.0859375 ], [ 0.05322265625, 0.0927734375 ], [ 0.04...
This dataset item assigns transmitter code Mavic2AirS and the status field reads the Flying state in the processed record.
For a signal in Flying state, which transmitter ID should be reported for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.02978515625, 0.068359375 ], [ 0.0390625, 0.06640625 ], [ 0.04833984375, 0.0830078125 ], [ 0.046875, 0.10546875 ], [ 0.04541015625, 0.10107421875 ], [ 0.0439453125, 0.07958984375 ], [ 0.037109375, 0.078125 ], [ 0.05322265625,...
The recorded drone signal assigns transmitter code Mavic2AirS and the status field reads the activity state Flying for this IQ window.
When the activity state is Flying, what source transmitter is indicated for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.044921875, 0.0791015625 ], [ 0.05908203125, 0.087890625 ], [ 0.056640625, 0.09423828125 ], [ 0.03076171875, 0.083984375 ], [ 0.0322265625, 0.0693359375 ], [ 0.05615234375, 0.0673828125 ], [ 0.06982421875, 0.08642578125 ], [ ...
The analyzed transmission lists the transmitter as Mavic2AirS with the operating condition set to the recorded status Flying for model training.
Given status Flying, please provide the transmitter identifier for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05224609375, 0.09130859375 ], [ 0.05078125, 0.1025390625 ], [ 0.05078125, 0.0810546875 ], [ 0.0517578125, 0.07177734375 ], [ 0.05029296875, 0.0751953125 ], [ 0.044921875, 0.0927734375 ], [ 0.05029296875, 0.10888671875 ], [ 0...
The recorded drone signal lists the transmitter as Mavic2AirS with the signal showing the flight state Flying in the dataset.
Given status Flying, can you identify the transmitter ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.06591796875 ], [ 0.0439453125, 0.0595703125 ], [ 0.037109375, 0.076171875 ], [ 0.03173828125, 0.08251953125 ], [ 0.037109375, 0.08203125 ], [ 0.0478515625, 0.087890625 ], [ 0.04248046875, 0.0859375 ], [ 0.0317...
The analyzed transmission records transmitter identifier Mavic2AirS while the flight state Flying in the processed record.
When the activity state is Flying, what source transmitter is indicated for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03173828125, 0.07958984375 ], [ 0.05810546875, 0.0810546875 ], [ 0.06591796875, 0.08984375 ], [ 0.0439453125, 0.08740234375 ], [ 0.0341796875, 0.08203125 ], [ 0.0546875, 0.0966796875 ], [ 0.05615234375, 0.12451171875 ], [ 0....
The received signal record uses transmitter ID Mavic2AirS with status classified as the Flying state for this IQ window.
When the recorded status is Flying, which transmitter code should be selected for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0546875, 0.08447265625 ], [ 0.04296875, 0.076171875 ], [ 0.044921875, 0.0830078125 ], [ 0.06982421875, 0.10107421875 ], [ 0.06787109375, 0.099609375 ], [ 0.04248046875, 0.083984375 ], [ 0.04052734375, 0.07958984375 ], [ 0.06...
The recorded drone signal comes from transmitter Mavic2AirS under a recorded state of Flying for the current observation.
In a sample labeled Flying, what is the transmitting unit ID for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.064453125, 0.09423828125 ], [ 0.05126953125, 0.0947265625 ], [ 0.02587890625, 0.0927734375 ], [ 0.0234375, 0.091796875 ], [ 0.044921875, 0.091796875 ], [ 0.05419921875, 0.08154296875 ], [ 0.0517578125, 0.07421875 ], [ 0.0410...
The recorded drone signal comes from transmitter Mavic2AirS and the observed status is the operating mode Flying.
Given status Flying, which transmitter ID should be reported for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04345703125, 0.06689453125 ], [ 0.06689453125, 0.068359375 ], [ 0.0517578125, 0.0849609375 ], [ 0.02978515625, 0.0810546875 ], [ 0.03759765625, 0.06884765625 ], [ 0.0439453125, 0.078125 ], [ 0.0341796875, 0.09228515625 ], [ ...
The signal observation uses transmitter ID Mavic2AirS while the label Flying in the signal log.
For this Flying observation, what is the transmitting unit ID for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.09716796875 ], [ 0.05322265625, 0.08544921875 ], [ 0.052734375, 0.0595703125 ], [ 0.05859375, 0.0576171875 ], [ 0.07861328125, 0.0771484375 ], [ 0.06591796875, 0.1025390625 ], [ 0.02197265625, 0.11083984375 ], [ ...
The current telemetry entry uses transmitter ID Mavic2AirS and the status field reads the operating mode Flying for this IQ window.
Using the status value Flying, which transmitter ID should be reported for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03955078125, 0.10107421875 ], [ 0.0478515625, 0.07373046875 ], [ 0.04736328125, 0.064453125 ], [ 0.03564453125, 0.087890625 ], [ 0.03564453125, 0.1064453125 ], [ 0.05517578125, 0.0986328125 ], [ 0.07421875, 0.072265625 ], [ ...
The analyzed transmission lists the transmitter as Mavic2AirS with status classified as status Flying in the labeled example.
Given status Flying, what source device ID should be returned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04345703125, 0.10888671875 ], [ 0.04638671875, 0.0927734375 ], [ 0.04150390625, 0.07275390625 ], [ 0.04638671875, 0.08251953125 ], [ 0.0625, 0.103515625 ], [ 0.060546875, 0.08251953125 ], [ 0.03759765625, 0.06005859375 ], [ ...
The captured IQ segment lists the transmitter as Mavic2AirS where the drone state is a Flying condition for this sample.
For this Flying observation, what is the transmitting unit ID for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0673828125, 0.0791015625 ], [ 0.05322265625, 0.08837890625 ], [ 0.05615234375, 0.09912109375 ], [ 0.06787109375, 0.0927734375 ], [ 0.056640625, 0.078125 ], [ 0.03173828125, 0.0810546875 ], [ 0.03662109375, 0.0859375 ], [ 0.0...
This DroneDetect sample uses transmitter ID Mavic2AirS while the flight condition is the flight state Flying in the dataset.
Using the status value Flying, which transmitter value belongs to the record for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05908203125, 0.09765625 ], [ 0.05517578125, 0.09033203125 ], [ 0.05029296875, 0.091796875 ], [ 0.04833984375, 0.09228515625 ], [ 0.04052734375, 0.09912109375 ], [ 0.0341796875, 0.09375 ], [ 0.05615234375, 0.09033203125 ], [ ...
This DroneDetect sample records transmitter identifier Mavic2AirS while the flight condition is the operating mode Flying in the dataset.
In a sample labeled Flying, which transmitter ID should be reported for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06396484375, 0.0791015625 ], [ 0.0498046875, 0.07958984375 ], [ 0.04736328125, 0.068359375 ], [ 0.05859375, 0.064453125 ], [ 0.05615234375, 0.0732421875 ], [ 0.04052734375, 0.08154296875 ], [ 0.037109375, 0.076171875 ], [ 0....
This dataset item uses transmitter ID Mavic2AirS where the drone state is a Flying condition in the processed record.
For the current mode Flying, what source device ID should be returned for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04931640625, 0.0771484375 ], [ 0.02099609375, 0.09326171875 ], [ 0.04541015625, 0.08935546875 ], [ 0.08349609375, 0.07763671875 ], [ 0.07080078125, 0.0869140625 ], [ 0.03759765625, 0.1005859375 ], [ 0.03515625, 0.0908203125 ], [...
This dataset item identifies transmitter Mavic2AirS under a recorded state of the recorded status Flying for the current observation.
For the current mode Flying, what transmitter ID is associated with the capture for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03271484375, 0.07861328125 ], [ 0.0361328125, 0.0546875 ], [ 0.05615234375, 0.0810546875 ], [ 0.06494140625, 0.103515625 ], [ 0.0625, 0.0888671875 ], [ 0.05908203125, 0.07421875 ], [ 0.05078125, 0.0869140625 ], [ 0.045410156...
The current telemetry entry marks Mavic2AirS as the transmitter with the signal showing Flying in the processed record.
When the activity state is Flying, what source device ID should be returned for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05810546875, 0.09326171875 ], [ 0.04052734375, 0.06591796875 ], [ 0.03173828125, 0.05908203125 ], [ 0.0478515625, 0.07666015625 ], [ 0.0732421875, 0.09375 ], [ 0.07470703125, 0.0908203125 ], [ 0.041015625, 0.07958984375 ], [ ...
This DroneDetect sample records transmitter identifier Mavic2AirS and the operating mode Flying for model training.
For the current mode Flying, what is the source transmitter ID for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04736328125, 0.0810546875 ], [ 0.0400390625, 0.0849609375 ], [ 0.04345703125, 0.09765625 ], [ 0.0556640625, 0.095703125 ], [ 0.04931640625, 0.07958984375 ], [ 0.04296875, 0.0693359375 ], [ 0.06005859375, 0.0830078125 ], [ 0....
The captured IQ segment uses transmitter ID Mavic2AirS and the observed status is status Flying for this sample.
Given status Flying, what source transmitter is indicated for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.025390625, 0.0810546875 ], [ 0.02978515625, 0.0771484375 ], [ 0.048828125, 0.0947265625 ], [ 0.044921875, 0.09033203125 ], [ 0.03857421875, 0.078125 ], [ 0.05078125, 0.08154296875 ], [ 0.056640625, 0.08447265625 ], [ 0.04882...
This DroneDetect sample identifies transmitter Mavic2AirS while the flight condition is the Flying state in the processed record.
For the current mode Flying, what is the source transmitter ID for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.052734375, 0.10302734375 ], [ 0.06494140625, 0.09375 ], [ 0.06689453125, 0.0771484375 ], [ 0.05908203125, 0.0849609375 ], [ 0.03955078125, 0.10009765625 ], [ 0.03857421875, 0.09716796875 ], [ 0.04296875, 0.0908203125 ], [ 0....
This DroneDetect sample comes from transmitter Mavic2AirS and the observed status is the operating mode Flying in the signal log.
Given status Flying, which transmitter value belongs to the record for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05126953125, 0.08154296875 ], [ 0.03271484375, 0.0859375 ], [ 0.02490234375, 0.0771484375 ], [ 0.056640625, 0.076171875 ], [ 0.0791015625, 0.09228515625 ], [ 0.052734375, 0.09814453125 ], [ 0.0400390625, 0.07958984375 ], [ 0...
This dataset item marks Mavic2AirS as the transmitter while the flight condition is the activity state Flying for model training.
For this Flying observation, which RF source ID corresponds to the sample for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.048828125, 0.1044921875 ], [ 0.04345703125, 0.0830078125 ], [ 0.0400390625, 0.07177734375 ], [ 0.056640625, 0.080078125 ], [ 0.06103515625, 0.08544921875 ], [ 0.03125, 0.07373046875 ], [ 0.01708984375, 0.0751953125 ], [ 0.04...
The recorded drone signal marks Mavic2AirS as the transmitter and the status field reads the current mode Flying.
With the drone status known as Flying, what transmitter identifier should be used for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05078125, 0.1005859375 ], [ 0.05419921875, 0.1005859375 ], [ 0.05224609375, 0.06591796875 ], [ 0.04296875, 0.0654296875 ], [ 0.03857421875, 0.08935546875 ], [ 0.04541015625, 0.08251953125 ], [ 0.05419921875, 0.05517578125 ], [ ...
The captured IQ segment reports the source as Mavic2AirS while status Flying in the processed record.
When the activity state is Flying, please provide the transmitter identifier for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05712890625, 0.0703125 ], [ 0.04443359375, 0.08935546875 ], [ 0.046875, 0.09375 ], [ 0.07958984375, 0.08544921875 ], [ 0.08642578125, 0.0810546875 ], [ 0.046875, 0.08642578125 ], [ 0.0185546875, 0.0908203125 ], [ 0.040527343...
The monitoring log identifies transmitter Mavic2AirS while the flight condition is the recorded status Flying in the dataset.
For a signal in Flying state, please provide the transmitter identifier for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03466796875, 0.09423828125 ], [ 0.04638671875, 0.0625 ], [ 0.0625, 0.0615234375 ], [ 0.056640625, 0.0869140625 ], [ 0.044921875, 0.0966796875 ], [ 0.03759765625, 0.07666015625 ], [ 0.02685546875, 0.0654296875 ], [ 0.02490234...
The captured IQ segment uses transmitter ID Mavic2AirS while a Flying condition for this sample.
When the recorded status is Flying, which transmitter code should be selected for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05419921875, 0.087890625 ], [ 0.04052734375, 0.1005859375 ], [ 0.03955078125, 0.083984375 ], [ 0.0400390625, 0.0673828125 ], [ 0.05322265625, 0.0751953125 ], [ 0.06005859375, 0.078125 ], [ 0.05615234375, 0.06982421875 ], [ 0...
The received signal record lists the transmitter as Mavic2AirS with the signal showing the label Flying for this IQ window.
For the current mode Flying, which transmitter ID should be reported for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.08837890625 ], [ 0.0546875, 0.09375 ], [ 0.0478515625, 0.1064453125 ], [ 0.03271484375, 0.08544921875 ], [ 0.04052734375, 0.06689453125 ], [ 0.060546875, 0.0791015625 ], [ 0.04833984375, 0.1064453125 ], [ 0.03...
This DroneDetect sample identifies transmitter Mavic2AirS and the status field reads Flying for this sample.
When the activity state is Flying, can you identify the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04931640625, 0.08544921875 ], [ 0.05419921875, 0.09521484375 ], [ 0.02783203125, 0.0927734375 ], [ 0.025390625, 0.0859375 ], [ 0.06201171875, 0.0869140625 ], [ 0.0791015625, 0.09375 ], [ 0.04638671875, 0.0947265625 ], [ 0.02...
The recorded drone signal records transmitter identifier Mavic2AirS under a recorded state of the recorded status Flying for the current observation.
In a sample labeled Flying, what transmitter ID is associated with the capture for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05908203125, 0.0859375 ], [ 0.04931640625, 0.08544921875 ], [ 0.0419921875, 0.0927734375 ], [ 0.03271484375, 0.0830078125 ], [ 0.03662109375, 0.06640625 ], [ 0.0478515625, 0.0810546875 ], [ 0.05126953125, 0.09814453125 ], [ ...
The received signal record points to source transmitter Mavic2AirS with the operating condition set to the flight state Flying for this sample.
In a sample labeled Flying, what source transmitter is indicated for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.02490234375, 0.09423828125 ], [ 0.04150390625, 0.07177734375 ], [ 0.05419921875, 0.0556640625 ], [ 0.04931640625, 0.0771484375 ], [ 0.03466796875, 0.1181640625 ], [ 0.025390625, 0.119140625 ], [ 0.05126953125, 0.076171875 ], [ ...
This dataset item marks Mavic2AirS as the transmitter and the operating mode Flying.
With the drone status known as Flying, which transmitter code matches the signal for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06103515625, 0.0888671875 ], [ 0.05712890625, 0.0849609375 ], [ 0.03955078125, 0.07568359375 ], [ 0.0341796875, 0.080078125 ], [ 0.05126953125, 0.095703125 ], [ 0.07421875, 0.1044921875 ], [ 0.06298828125, 0.0888671875 ], [ ...
The monitoring log records transmitter identifier Mavic2AirS and the observed status is the current mode Flying in this capture.
Using the status value Flying, which transmitter ID should be reported for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.0791015625 ], [ 0.0322265625, 0.087890625 ], [ 0.02587890625, 0.087890625 ], [ 0.02490234375, 0.064453125 ], [ 0.02783203125, 0.048828125 ], [ 0.03759765625, 0.0693359375 ], [ 0.04443359375, 0.09033203125 ], [ ...
This RF capture marks Mavic2AirS as the transmitter while the flight condition is the operating mode Flying in the labeled example.
Using the status value Flying, what is the transmitting unit ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.025390625, 0.087890625 ], [ 0.02685546875, 0.08544921875 ], [ 0.05322265625, 0.0712890625 ], [ 0.07177734375, 0.08203125 ], [ 0.06884765625, 0.0986328125 ], [ 0.0625, 0.087890625 ], [ 0.05615234375, 0.08154296875 ], [ 0.0532...
The captured IQ segment assigns transmitter code Mavic2AirS under a recorded state of the label Flying.
For this Flying observation, which transmitter code matches the signal for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03857421875, 0.0791015625 ], [ 0.03515625, 0.09765625 ], [ 0.02978515625, 0.0830078125 ], [ 0.046875, 0.05419921875 ], [ 0.06396484375, 0.0693359375 ], [ 0.06689453125, 0.0947265625 ], [ 0.05908203125, 0.08935546875 ], [ 0.0...
This DroneDetect sample records transmitter identifier Mavic2AirS and the operating mode Flying for model training.
For a signal in Flying state, please determine the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.048828125, 0.0869140625 ], [ 0.0341796875, 0.09033203125 ], [ 0.052734375, 0.0751953125 ], [ 0.078125, 0.0703125 ], [ 0.05908203125, 0.07861328125 ], [ 0.02099609375, 0.0859375 ], [ 0.01416015625, 0.08349609375 ], [ 0.040039...
The current telemetry entry reports the source as Mavic2AirS and the status field reads a Flying condition in this capture.
When the recorded status is Flying, which RF source ID corresponds to the sample for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04345703125, 0.0859375 ], [ 0.04296875, 0.09228515625 ], [ 0.04736328125, 0.0849609375 ], [ 0.04443359375, 0.0849609375 ], [ 0.04736328125, 0.09375 ], [ 0.05908203125, 0.1083984375 ], [ 0.06103515625, 0.1103515625 ], [ 0.043...
This dataset item marks Mavic2AirS as the transmitter and the operating mode Flying.
When the activity state is Flying, what transmitter label should be recorded for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05908203125, 0.09716796875 ], [ 0.06103515625, 0.0869140625 ], [ 0.04052734375, 0.0712890625 ], [ 0.04638671875, 0.07421875 ], [ 0.07568359375, 0.0947265625 ], [ 0.06787109375, 0.10595703125 ], [ 0.025390625, 0.09423828125 ], [ ...
This DroneDetect sample is associated with transmitter Mavic2AirS and the observed status is status Flying in this capture.
In a sample labeled Flying, can you identify the transmitter ID for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05126953125, 0.1015625 ], [ 0.048828125, 0.0703125 ], [ 0.04052734375, 0.0595703125 ], [ 0.04931640625, 0.1005859375 ], [ 0.05908203125, 0.1162109375 ], [ 0.05322265625, 0.083984375 ], [ 0.03271484375, 0.06298828125 ], [ 0.0...
This dataset item reports the source as Mavic2AirS with the signal showing the current mode Flying.
For the current mode Flying, please determine the transmitter ID for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05224609375, 0.0537109375 ], [ 0.04833984375, 0.07470703125 ], [ 0.0390625, 0.09716796875 ], [ 0.03857421875, 0.0947265625 ], [ 0.04296875, 0.0830078125 ], [ 0.03955078125, 0.078125 ], [ 0.03515625, 0.0771484375 ], [ 0.04052...
The recorded drone signal assigns transmitter code Mavic2AirS where the drone state is the Flying state in this capture.
For a signal in Flying state, which emitting transmitter produced the signal for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03857421875, 0.099609375 ], [ 0.0478515625, 0.08740234375 ], [ 0.05322265625, 0.078125 ], [ 0.03759765625, 0.0732421875 ], [ 0.03564453125, 0.07470703125 ], [ 0.0498046875, 0.0849609375 ], [ 0.05224609375, 0.09375 ], [ 0.049...
The analyzed transmission marks Mavic2AirS as the transmitter and the status field reads the Flying state for the current observation.
For a signal in Flying state, please provide the transmitter identifier for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.021484375, 0.08251953125 ], [ 0.0361328125, 0.05859375 ], [ 0.072265625, 0.0791015625 ], [ 0.07080078125, 0.1005859375 ], [ 0.05078125, 0.08740234375 ], [ 0.046875, 0.07275390625 ], [ 0.048828125, 0.087890625 ], [ 0.0390625,...
The analyzed transmission lists the transmitter as Mavic2AirS and the label Flying in this capture.
For an IQ segment marked Flying, please provide the transmitter identifier for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05908203125, 0.0810546875 ], [ 0.0517578125, 0.07958984375 ], [ 0.0419921875, 0.09033203125 ], [ 0.03759765625, 0.087890625 ], [ 0.0478515625, 0.07421875 ], [ 0.04931640625, 0.08154296875 ], [ 0.052734375, 0.09033203125 ], [ ...
The received signal record assigns transmitter code Mavic2AirS with the signal showing status Flying in the labeled example.
When the recorded status is Flying, which RF source ID corresponds to the sample for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04638671875, 0.07373046875 ], [ 0.04541015625, 0.07177734375 ], [ 0.05517578125, 0.08203125 ], [ 0.064453125, 0.09765625 ], [ 0.05908203125, 0.09716796875 ], [ 0.05908203125, 0.07470703125 ], [ 0.064453125, 0.06640625 ], [ 0...
The signal observation marks Mavic2AirS as the transmitter and the operating mode Flying in the labeled example.
Using the status value Flying, what transmitting unit should be labeled for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05224609375, 0.06982421875 ], [ 0.05908203125, 0.068359375 ], [ 0.0498046875, 0.09375 ], [ 0.03466796875, 0.1142578125 ], [ 0.03515625, 0.0966796875 ], [ 0.05419921875, 0.07958984375 ], [ 0.06884765625, 0.0869140625 ], [ 0.0...
This dataset item assigns transmitter code Mavic2AirS with the signal showing a Flying condition in the dataset.
When the activity state is Flying, which transmitter code matches the signal for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.041015625, 0.0810546875 ], [ 0.025390625, 0.06396484375 ], [ 0.037109375, 0.0556640625 ], [ 0.05517578125, 0.0693359375 ], [ 0.05224609375, 0.0908203125 ], [ 0.03759765625, 0.08935546875 ], [ 0.03662109375, 0.07373046875 ], [ ...
The received signal record comes from transmitter Mavic2AirS under a recorded state of Flying for this sample.
When the activity state is Flying, what source transmitter is indicated for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0478515625, 0.10107421875 ], [ 0.0400390625, 0.10302734375 ], [ 0.03759765625, 0.080078125 ], [ 0.03662109375, 0.064453125 ], [ 0.03564453125, 0.09228515625 ], [ 0.03955078125, 0.1064453125 ], [ 0.05712890625, 0.083984375 ], [ ...
The captured IQ segment uses transmitter ID Mavic2AirS and the activity state Flying in the labeled example.
In a sample labeled Flying, which transmitter value belongs to the record for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0478515625, 0.07958984375 ], [ 0.056640625, 0.08984375 ], [ 0.0546875, 0.08935546875 ], [ 0.04443359375, 0.0654296875 ], [ 0.05615234375, 0.06298828125 ], [ 0.07080078125, 0.0810546875 ], [ 0.05615234375, 0.0849609375 ], [ 0...
The recorded drone signal lists the transmitter as Mavic2AirS with the signal showing the operating mode Flying for the current observation.
When the activity state is Flying, please provide the transmitter identifier for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05615234375, 0.083984375 ], [ 0.0400390625, 0.0771484375 ], [ 0.04150390625, 0.078125 ], [ 0.0556640625, 0.09521484375 ], [ 0.05712890625, 0.09765625 ], [ 0.05322265625, 0.07763671875 ], [ 0.0546875, 0.0732421875 ], [ 0.0532...
The monitoring log points to source transmitter Mavic2AirS and the label Flying for the current observation.
Using the status value Flying, what source transmitter is indicated for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06005859375, 0.09130859375 ], [ 0.0625, 0.0947265625 ], [ 0.03759765625, 0.09228515625 ], [ 0.005859375, 0.0888671875 ], [ 0.015625, 0.0703125 ], [ 0.05078125, 0.056640625 ], [ 0.06884765625, 0.0751953125 ], [ 0.05322265625,...
The current telemetry entry marks Mavic2AirS as the transmitter while the flight condition is the activity state Flying for the current observation.
When the activity state is Flying, which transmitter identifier fits this observation for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04296875, 0.0869140625 ], [ 0.0625, 0.09228515625 ], [ 0.06640625, 0.08984375 ], [ 0.04638671875, 0.06982421875 ], [ 0.033203125, 0.06298828125 ], [ 0.04345703125, 0.0791015625 ], [ 0.05517578125, 0.10107421875 ], [ 0.044433...
The received signal record reports the source as Mavic2AirS under a recorded state of the current mode Flying in the processed record.
For the current mode Flying, what transmitting unit should be labeled for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06103515625, 0.0849609375 ], [ 0.06884765625, 0.0927734375 ], [ 0.05322265625, 0.09423828125 ], [ 0.04541015625, 0.08935546875 ], [ 0.04248046875, 0.08642578125 ], [ 0.04296875, 0.08251953125 ], [ 0.046875, 0.072265625 ], [ ...
The current telemetry entry lists the transmitter as Mavic2AirS and the Flying state in the dataset.
With the drone status known as Flying, what transmitter ID is associated with the capture for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0439453125, 0.099609375 ], [ 0.03759765625, 0.07763671875 ], [ 0.06396484375, 0.06298828125 ], [ 0.06591796875, 0.07568359375 ], [ 0.03271484375, 0.08837890625 ], [ 0.03564453125, 0.08203125 ], [ 0.07177734375, 0.0810546875 ], [...
The recorded drone signal records transmitter identifier Mavic2AirS with status classified as the current mode Flying in the signal log.
When the activity state is Flying, can you identify the transmitter ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04931640625, 0.0732421875 ], [ 0.02685546875, 0.0654296875 ], [ 0.0546875, 0.0732421875 ], [ 0.08203125, 0.09130859375 ], [ 0.05126953125, 0.0849609375 ], [ 0.02783203125, 0.06640625 ], [ 0.04541015625, 0.08154296875 ], [ 0....
The captured IQ segment uses transmitter ID Mavic2AirS and the observed status is status Flying for this sample.
For an IQ segment marked Flying, can you identify the transmitter ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05322265625, 0.1044921875 ], [ 0.056640625, 0.07666015625 ], [ 0.0556640625, 0.05517578125 ], [ 0.06005859375, 0.07373046875 ], [ 0.0556640625, 0.099609375 ], [ 0.04443359375, 0.0888671875 ], [ 0.0419921875, 0.06494140625 ], [ ...
This DroneDetect sample points to source transmitter Mavic2AirS with status classified as Flying in the dataset.
Given status Flying, which transmitter ID should be reported for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0400390625, 0.0947265625 ], [ 0.0341796875, 0.08154296875 ], [ 0.05029296875, 0.0771484375 ], [ 0.06494140625, 0.0791015625 ], [ 0.06982421875, 0.0830078125 ], [ 0.05908203125, 0.0927734375 ], [ 0.046875, 0.10107421875 ], [ ...
The recorded drone signal assigns transmitter code Mavic2AirS and the status field reads the current mode Flying for model training.
Given status Flying, which transmitter ID should be reported for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05517578125, 0.091796875 ], [ 0.05078125, 0.11328125 ], [ 0.0361328125, 0.10791015625 ], [ 0.04052734375, 0.08203125 ], [ 0.04833984375, 0.06689453125 ], [ 0.03125, 0.06298828125 ], [ 0.0322265625, 0.07177734375 ], [ 0.06591...
The signal observation uses transmitter ID Mavic2AirS with the signal showing status Flying in this capture.
Given status Flying, can you identify the transmitter ID for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06103515625, 0.0693359375 ], [ 0.06640625, 0.08056640625 ], [ 0.05126953125, 0.107421875 ], [ 0.04052734375, 0.10595703125 ], [ 0.04443359375, 0.078125 ], [ 0.048828125, 0.06640625 ], [ 0.052734375, 0.08544921875 ], [ 0.0541...
The monitoring log identifies transmitter Mavic2AirS and the observed status is status Flying in the signal log.
Given status Flying, which RF source ID corresponds to the sample for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.046875, 0.08203125 ], [ 0.0498046875, 0.07470703125 ], [ 0.04443359375, 0.08056640625 ], [ 0.04052734375, 0.08935546875 ], [ 0.046875, 0.0966796875 ], [ 0.05615234375, 0.08984375 ], [ 0.048828125, 0.0732421875 ], [ 0.0288085...
The recorded drone signal comes from transmitter Mavic2AirS with the operating condition set to the flight state Flying in the dataset.
Given status Flying, what source device ID should be returned for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04248046875, 0.08544921875 ], [ 0.02490234375, 0.08203125 ], [ 0.0341796875, 0.07470703125 ], [ 0.0556640625, 0.07763671875 ], [ 0.05712890625, 0.0859375 ], [ 0.044921875, 0.09375 ], [ 0.04638671875, 0.0849609375 ], [ 0.0571...
This dataset item comes from transmitter Mavic2AirS with the signal showing the operating mode Flying in this capture.
When the activity state is Flying, what transmitter label should be recorded for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06884765625, 0.0625 ], [ 0.05810546875, 0.0810546875 ], [ 0.05126953125, 0.08544921875 ], [ 0.05859375, 0.07958984375 ], [ 0.05615234375, 0.06494140625 ], [ 0.04345703125, 0.0595703125 ], [ 0.04248046875, 0.07763671875 ], [ ...
This dataset item lists the transmitter as Mavic2AirS with the signal showing the flight state Flying in the signal log.
For the current mode Flying, what is the source transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05615234375, 0.0869140625 ], [ 0.0478515625, 0.06396484375 ], [ 0.02490234375, 0.06787109375 ], [ 0.0234375, 0.09375 ], [ 0.03759765625, 0.1083984375 ], [ 0.0498046875, 0.0966796875 ], [ 0.03955078125, 0.0849609375 ], [ 0.02...
The signal observation assigns transmitter code Mavic2AirS with status classified as the activity state Flying for model training.
In a sample labeled Flying, which transmitter value belongs to the record for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.10302734375 ], [ 0.04150390625, 0.08642578125 ], [ 0.0625, 0.078125 ], [ 0.07861328125, 0.10595703125 ], [ 0.04931640625, 0.10546875 ], [ 0.021484375, 0.0673828125 ], [ 0.0322265625, 0.068359375 ], [ 0.0395507...
The captured IQ segment uses transmitter ID Mavic2AirS and the recorded status Flying for this sample.
Using the status value Flying, please provide the transmitter identifier for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06591796875, 0.08642578125 ], [ 0.04736328125, 0.0947265625 ], [ 0.02783203125, 0.10009765625 ], [ 0.03857421875, 0.10498046875 ], [ 0.05419921875, 0.107421875 ], [ 0.04052734375, 0.09521484375 ], [ 0.033203125, 0.0849609375 ], ...
The signal observation comes from transmitter Mavic2AirS with the signal showing the activity state Flying for this sample.
In a sample labeled Flying, what source transmitter is indicated for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05078125, 0.080078125 ], [ 0.04052734375, 0.06787109375 ], [ 0.02685546875, 0.076171875 ], [ 0.03662109375, 0.103515625 ], [ 0.05322265625, 0.09765625 ], [ 0.0634765625, 0.0625 ], [ 0.06689453125, 0.0634765625 ], [ 0.0639648...
The received signal record lists the transmitter as Mavic2AirS under a recorded state of a Flying condition in the processed record.
Using the status value Flying, what transmitter ID is associated with the capture for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.041015625, 0.076171875 ], [ 0.03759765625, 0.09521484375 ], [ 0.02978515625, 0.0908203125 ], [ 0.0439453125, 0.06982421875 ], [ 0.0556640625, 0.08203125 ], [ 0.04541015625, 0.115234375 ], [ 0.02880859375, 0.11328125 ], [ 0.0...
This dataset item reports the source as Mavic2AirS where the drone state is Flying for model training.
For this Flying observation, what is the transmitting unit ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04736328125, 0.09228515625 ], [ 0.04296875, 0.072265625 ], [ 0.0634765625, 0.068359375 ], [ 0.0556640625, 0.09716796875 ], [ 0.02099609375, 0.109375 ], [ 0.0205078125, 0.08642578125 ], [ 0.04248046875, 0.068359375 ], [ 0.035...
This RF capture uses transmitter ID Mavic2AirS while the flight condition is Flying in the processed record.
For the current mode Flying, what transmitting unit should be labeled for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.056640625, 0.083984375 ], [ 0.0439453125, 0.07861328125 ], [ 0.02587890625, 0.0859375 ], [ 0.025390625, 0.0888671875 ], [ 0.04052734375, 0.0849609375 ], [ 0.05029296875, 0.08349609375 ], [ 0.04296875, 0.08203125 ], [ 0.03955...
The signal observation points to source transmitter Mavic2AirS and the observed status is the current mode Flying in the signal log.
For an IQ segment marked Flying, what source transmitter is indicated for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06884765625, 0.09228515625 ], [ 0.05322265625, 0.0751953125 ], [ 0.03271484375, 0.087890625 ], [ 0.05615234375, 0.1103515625 ], [ 0.08935546875, 0.103515625 ], [ 0.06787109375, 0.0888671875 ], [ 0.0244140625, 0.087890625 ], [ ...
The signal observation lists the transmitter as Mavic2AirS with the operating condition set to status Flying.
For an IQ segment marked Flying, please provide the transmitter identifier for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03271484375, 0.0634765625 ], [ 0.03125, 0.06689453125 ], [ 0.04443359375, 0.0908203125 ], [ 0.0556640625, 0.10986328125 ], [ 0.0478515625, 0.1083984375 ], [ 0.02587890625, 0.08251953125 ], [ 0.02685546875, 0.0654296875 ], [ ...
The recorded drone signal identifies transmitter Mavic2AirS with the signal showing the flight state Flying in the dataset.
When the activity state is Flying, please determine the transmitter ID for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.0791015625 ], [ 0.041015625, 0.09423828125 ], [ 0.05908203125, 0.0986328125 ], [ 0.05517578125, 0.072265625 ], [ 0.02783203125, 0.07275390625 ], [ 0.02978515625, 0.10205078125 ], [ 0.0654296875, 0.09814453125 ], [...
This DroneDetect sample comes from transmitter Mavic2AirS with status classified as the operating mode Flying in the processed record.
When the activity state is Flying, what transmitter label should be recorded for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05810546875, 0.09814453125 ], [ 0.03955078125, 0.08544921875 ], [ 0.03076171875, 0.078125 ], [ 0.0498046875, 0.0888671875 ], [ 0.07421875, 0.09716796875 ], [ 0.05615234375, 0.0771484375 ], [ 0.03076171875, 0.06640625 ], [ 0....
The recorded drone signal is associated with transmitter Mavic2AirS and the status field reads the Flying state.
When the recorded status is Flying, which transmitter ID should be reported for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04833984375, 0.1025390625 ], [ 0.04833984375, 0.09423828125 ], [ 0.06494140625, 0.0830078125 ], [ 0.05419921875, 0.0908203125 ], [ 0.0205078125, 0.1044921875 ], [ 0.02490234375, 0.0888671875 ], [ 0.05712890625, 0.07763671875 ], ...
This dataset item reports the source as Mavic2AirS and the status field reads the flight state Flying in this capture.
Using the status value Flying, which transmitter code matches the signal for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04345703125, 0.103515625 ], [ 0.0361328125, 0.0859375 ], [ 0.0556640625, 0.068359375 ], [ 0.07666015625, 0.09033203125 ], [ 0.068359375, 0.1181640625 ], [ 0.044921875, 0.10302734375 ], [ 0.0390625, 0.06982421875 ], [ 0.05712...
The monitoring log identifies transmitter Mavic2AirS and the observed status is the flight state Flying for this IQ window.
Using the status value Flying, which transmitter ID should be reported for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.06201171875 ], [ 0.05615234375, 0.0615234375 ], [ 0.05517578125, 0.0986328125 ], [ 0.0478515625, 0.0888671875 ], [ 0.0478515625, 0.044921875 ], [ 0.05078125, 0.056640625 ], [ 0.05029296875, 0.10595703125 ], [ ...
The captured IQ segment lists the transmitter as Mavic2AirS while the current mode Flying for model training.
In a sample labeled Flying, please determine the transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.029296875, 0.0947265625 ], [ 0.0322265625, 0.0810546875 ], [ 0.04736328125, 0.07861328125 ], [ 0.05078125, 0.0888671875 ], [ 0.03759765625, 0.08837890625 ], [ 0.02978515625, 0.0791015625 ], [ 0.05615234375, 0.0859375 ], [ 0....
This DroneDetect sample assigns transmitter code Mavic2AirS with status classified as the recorded status Flying in the labeled example.
Using the status value Flying, which emitting transmitter produced the signal for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04296875, 0.080078125 ], [ 0.03466796875, 0.078125 ], [ 0.04345703125, 0.08203125 ], [ 0.04443359375, 0.0830078125 ], [ 0.0400390625, 0.08935546875 ], [ 0.04541015625, 0.0830078125 ], [ 0.046875, 0.0751953125 ], [ 0.04443359...
The captured IQ segment is associated with transmitter Mavic2AirS and the current mode Flying for this sample.
For a signal in Flying state, please provide the transmitter identifier for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04248046875, 0.07568359375 ], [ 0.03955078125, 0.0751953125 ], [ 0.04833984375, 0.09033203125 ], [ 0.04931640625, 0.095703125 ], [ 0.04248046875, 0.080078125 ], [ 0.04833984375, 0.0654296875 ], [ 0.05517578125, 0.07470703125 ], ...
The received signal record lists the transmitter as Mavic2AirS with the signal showing a Flying condition in the dataset.
When the activity state is Flying, what source device ID should be returned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06494140625, 0.0751953125 ], [ 0.04296875, 0.07470703125 ], [ 0.0341796875, 0.0810546875 ], [ 0.05615234375, 0.0751953125 ], [ 0.06591796875, 0.07177734375 ], [ 0.04345703125, 0.0712890625 ], [ 0.02685546875, 0.0810546875 ], [ ...
The received signal record identifies transmitter Mavic2AirS while the recorded status Flying.
For this Flying observation, can you identify the transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0517578125, 0.0693359375 ], [ 0.04736328125, 0.09033203125 ], [ 0.04296875, 0.1005859375 ], [ 0.02880859375, 0.08544921875 ], [ 0.0322265625, 0.07861328125 ], [ 0.04931640625, 0.0830078125 ], [ 0.06103515625, 0.095703125 ], [ ...
This dataset item uses transmitter ID Mavic2AirS and the status field reads Flying.
With the drone status known as Flying, which transmitter ID should be reported for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying