Datasets:

iq
array 2D
Prompt
stringlengths
71
162
qa
stringlengths
64
126
center_frequency
stringclasses
1 value
bandwidth
stringclasses
1 value
sample_rate
stringclasses
1 value
transmitter_id
class label
2 classes
status
class label
3 classes
[ [ 0.05322265625, 0.087890625 ], [ 0.04443359375, 0.0732421875 ], [ 0.03125, 0.08935546875 ], [ 0.03076171875, 0.099609375 ], [ 0.04443359375, 0.08740234375 ], [ 0.06103515625, 0.0634765625 ], [ 0.05712890625, 0.0556640625 ], [ 0...
The received signal record assigns transmitter code Mavic2AirS with the signal showing status Flying in the labeled example.
When the recorded status is Flying, what transmitter ID is associated with the capture for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.09619140625 ], [ 0.05029296875, 0.09375 ], [ 0.04931640625, 0.07861328125 ], [ 0.04541015625, 0.0869140625 ], [ 0.0546875, 0.08203125 ], [ 0.044921875, 0.0673828125 ], [ 0.0234375, 0.0771484375 ], [ 0.02587890...
The analyzed transmission uses transmitter ID Mavic2AirS with status classified as status Flying for this sample.
With the drone status known as Flying, what is the transmitting unit ID for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06396484375, 0.068359375 ], [ 0.03955078125, 0.0849609375 ], [ 0.03857421875, 0.10302734375 ], [ 0.05810546875, 0.0947265625 ], [ 0.072265625, 0.07763671875 ], [ 0.07568359375, 0.06640625 ], [ 0.06103515625, 0.072265625 ], [ ...
The recorded drone signal assigns transmitter code Mavic2AirS where the drone state is the Flying state in this capture.
For a signal in Flying state, which source transmitter should be assigned for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06884765625, 0.08984375 ], [ 0.07470703125, 0.0947265625 ], [ 0.0390625, 0.08935546875 ], [ 0.01953125, 0.076171875 ], [ 0.04296875, 0.06982421875 ], [ 0.05859375, 0.08984375 ], [ 0.0517578125, 0.1103515625 ], [ 0.0551757812...
The monitoring log uses transmitter ID Mavic2AirS with status classified as the label Flying.
For the current mode Flying, what source transmitter is indicated for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.046875, 0.0888671875 ], [ 0.04931640625, 0.09912109375 ], [ 0.04931640625, 0.0869140625 ], [ 0.04833984375, 0.080078125 ], [ 0.0478515625, 0.09716796875 ], [ 0.0439453125, 0.1005859375 ], [ 0.041015625, 0.07080078125 ], [ 0....
The recorded drone signal points to source transmitter Mavic2AirS with the signal showing a Flying condition.
For the current mode Flying, please provide the transmitter identifier for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0390625, 0.095703125 ], [ 0.02783203125, 0.0908203125 ], [ 0.03759765625, 0.078125 ], [ 0.05078125, 0.0654296875 ], [ 0.056640625, 0.08544921875 ], [ 0.06201171875, 0.10498046875 ], [ 0.05078125, 0.0869140625 ], [ 0.02929687...
The recorded drone signal records transmitter identifier Mavic2AirS where the drone state is a Flying condition for model training.
For the current mode Flying, what source device ID should be returned for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04296875, 0.09375 ], [ 0.03125, 0.08203125 ], [ 0.04541015625, 0.06982421875 ], [ 0.05322265625, 0.08056640625 ], [ 0.04150390625, 0.1025390625 ], [ 0.0244140625, 0.10498046875 ], [ 0.03662109375, 0.0849609375 ], [ 0.0566406...
The recorded drone signal uses transmitter ID Mavic2AirS with the signal showing the label Flying.
For this Flying observation, which transmitter code matches the signal for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0244140625, 0.078125 ], [ 0.0556640625, 0.10498046875 ], [ 0.05810546875, 0.09619140625 ], [ 0.02734375, 0.0712890625 ], [ 0.04150390625, 0.0732421875 ], [ 0.07958984375, 0.0859375 ], [ 0.07177734375, 0.08935546875 ], [ 0.04...
The received signal record records transmitter identifier Mavic2AirS and the observed status is the flight state Flying in this capture.
With the drone status known as Flying, which RF source ID corresponds to the sample for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.0888671875 ], [ 0.04833984375, 0.0947265625 ], [ 0.03955078125, 0.0888671875 ], [ 0.0390625, 0.0732421875 ], [ 0.0517578125, 0.07470703125 ], [ 0.05908203125, 0.0927734375 ], [ 0.04150390625, 0.0908203125 ], [ ...
The current telemetry entry points to source transmitter Mavic2AirS and the observed status is the operating mode Flying in the signal log.
In a sample labeled Flying, which transmitter value belongs to the record for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04931640625, 0.0595703125 ], [ 0.04296875, 0.04296875 ], [ 0.04052734375, 0.06982421875 ], [ 0.05029296875, 0.0986328125 ], [ 0.05322265625, 0.099609375 ], [ 0.05078125, 0.08837890625 ], [ 0.05224609375, 0.1005859375 ], [ 0....
The captured IQ segment lists the transmitter as Mavic2AirS while status Flying in the processed record.
For this Flying observation, which emitting transmitter produced the signal for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06103515625, 0.07763671875 ], [ 0.0517578125, 0.09326171875 ], [ 0.05810546875, 0.09423828125 ], [ 0.05517578125, 0.09130859375 ], [ 0.05029296875, 0.0732421875 ], [ 0.06103515625, 0.05517578125 ], [ 0.05712890625, 0.07421875 ], ...
The recorded drone signal lists the transmitter as Mavic2AirS where the drone state is the current mode Flying.
With the drone status known as Flying, which transmitter code matches the signal for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03173828125, 0.10205078125 ], [ 0.03271484375, 0.0888671875 ], [ 0.04833984375, 0.08203125 ], [ 0.04443359375, 0.09375 ], [ 0.02978515625, 0.09619140625 ], [ 0.04833984375, 0.08154296875 ], [ 0.06884765625, 0.08154296875 ], [ ...
The received signal record assigns transmitter code Mavic2AirS with the signal showing the recorded status Flying in the processed record.
For an IQ segment marked Flying, which transmitter code matches the signal for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.08203125 ], [ 0.05615234375, 0.076171875 ], [ 0.06591796875, 0.07861328125 ], [ 0.05615234375, 0.08740234375 ], [ 0.03955078125, 0.09033203125 ], [ 0.044921875, 0.083984375 ], [ 0.05517578125, 0.0869140625 ], [ ...
The recorded drone signal is associated with transmitter Mavic2AirS and the status field reads the Flying state.
For a signal in Flying state, which source transmitter should be assigned for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0234375, 0.0693359375 ], [ 0.04541015625, 0.091796875 ], [ 0.05615234375, 0.12451171875 ], [ 0.05078125, 0.1123046875 ], [ 0.0478515625, 0.0771484375 ], [ 0.05908203125, 0.08935546875 ], [ 0.05517578125, 0.1201171875 ], [ 0....
The captured IQ segment reports the source as Mavic2AirS with the operating condition set to status Flying for this sample.
For this Flying observation, what source device ID should be returned for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06640625, 0.06884765625 ], [ 0.06396484375, 0.07275390625 ], [ 0.04248046875, 0.09033203125 ], [ 0.03564453125, 0.087890625 ], [ 0.05859375, 0.06396484375 ], [ 0.08447265625, 0.06298828125 ], [ 0.0634765625, 0.1005859375 ], [ ...
The received signal record uses transmitter ID Mavic2AirS with status classified as the Flying state for this IQ window.
For a signal in Flying state, what is the transmitting unit ID for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05810546875, 0.072265625 ], [ 0.046875, 0.10693359375 ], [ 0.03125, 0.09228515625 ], [ 0.044921875, 0.056640625 ], [ 0.0673828125, 0.0693359375 ], [ 0.06201171875, 0.1142578125 ], [ 0.05419921875, 0.1162109375 ], [ 0.0639648...
The recorded drone signal points to source transmitter Mavic2AirS under a recorded state of the activity state Flying for this sample.
In a sample labeled Flying, what transmitter ID is associated with the capture for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05029296875, 0.0888671875 ], [ 0.05126953125, 0.0703125 ], [ 0.04541015625, 0.08349609375 ], [ 0.03759765625, 0.08935546875 ], [ 0.03857421875, 0.0673828125 ], [ 0.04541015625, 0.0673828125 ], [ 0.04443359375, 0.09375 ], [ 0...
This DroneDetect sample records transmitter identifier Mavic2AirS with status classified as the label Flying for this sample.
In a sample labeled Flying, which transmitter ID should be reported for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0390625, 0.08349609375 ], [ 0.044921875, 0.08740234375 ], [ 0.06396484375, 0.0869140625 ], [ 0.041015625, 0.07470703125 ], [ 0.021484375, 0.07177734375 ], [ 0.0390625, 0.08544921875 ], [ 0.05322265625, 0.0908203125 ], [ 0.04...
The captured IQ segment uses transmitter ID Mavic2AirS with the operating condition set to the flight state Flying in this capture.
Using the status value Flying, which source transmitter should be assigned for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05810546875, 0.0673828125 ], [ 0.05029296875, 0.08447265625 ], [ 0.02685546875, 0.10009765625 ], [ 0.03271484375, 0.0927734375 ], [ 0.0625, 0.07373046875 ], [ 0.07958984375, 0.0693359375 ], [ 0.07421875, 0.076171875 ], [ 0.0...
This dataset item lists the transmitter as Mavic2AirS and the status field reads the operating mode Flying in the processed record.
For this Flying observation, what is the transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.0654296875 ], [ 0.02783203125, 0.0771484375 ], [ 0.04541015625, 0.0888671875 ], [ 0.06103515625, 0.09033203125 ], [ 0.04150390625, 0.087890625 ], [ 0.03271484375, 0.0859375 ], [ 0.06103515625, 0.08935546875 ], [ ...
The signal observation comes from transmitter Mavic2AirS with the signal showing the activity state Flying for this sample.
When the activity state is Flying, what transmitter ID is associated with the capture for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03662109375, 0.0693359375 ], [ 0.04296875, 0.0693359375 ], [ 0.048828125, 0.07958984375 ], [ 0.0439453125, 0.1015625 ], [ 0.03759765625, 0.11669921875 ], [ 0.04150390625, 0.1123046875 ], [ 0.05126953125, 0.0869140625 ], [ 0....
The current telemetry entry assigns transmitter code Mavic2AirS with the signal showing the Flying state for this sample.
In a sample labeled Flying, which transmitter identifier fits this observation for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0673828125, 0.10205078125 ], [ 0.064453125, 0.09765625 ], [ 0.04296875, 0.08154296875 ], [ 0.0361328125, 0.08544921875 ], [ 0.05322265625, 0.09423828125 ], [ 0.06298828125, 0.0888671875 ], [ 0.0556640625, 0.0810546875 ], [ 0...
The monitoring log identifies transmitter Mavic2AirS under a recorded state of the current mode Flying for this sample.
When the recorded status is Flying, what transmitting unit should be labeled for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05322265625, 0.0810546875 ], [ 0.0703125, 0.08935546875 ], [ 0.06591796875, 0.09716796875 ], [ 0.04833984375, 0.09033203125 ], [ 0.037109375, 0.0810546875 ], [ 0.04296875, 0.0859375 ], [ 0.05517578125, 0.08935546875 ], [ 0.0...
The captured IQ segment marks Mavic2AirS as the transmitter under a recorded state of the Flying state for this IQ window.
For this Flying observation, which source transmitter should be assigned for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05517578125, 0.07666015625 ], [ 0.05078125, 0.08935546875 ], [ 0.05810546875, 0.10205078125 ], [ 0.0634765625, 0.0986328125 ], [ 0.05078125, 0.099609375 ], [ 0.05029296875, 0.10498046875 ], [ 0.0478515625, 0.09521484375 ], [ ...
The signal observation lists the transmitter as Mavic2AirS with the signal showing the operating mode Flying for this sample.
For the current mode Flying, what transmitting unit should be labeled for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.044921875, 0.08349609375 ], [ 0.03759765625, 0.0751953125 ], [ 0.05078125, 0.07080078125 ], [ 0.04541015625, 0.08984375 ], [ 0.03564453125, 0.08544921875 ], [ 0.03955078125, 0.06298828125 ], [ 0.04736328125, 0.06982421875 ], [ ...
This dataset item marks Mavic2AirS as the transmitter with status classified as the recorded status Flying for model training.
For an IQ segment marked Flying, which transmitter code should be selected for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03271484375, 0.09716796875 ], [ 0.04638671875, 0.0732421875 ], [ 0.06298828125, 0.056640625 ], [ 0.04833984375, 0.068359375 ], [ 0.03564453125, 0.0888671875 ], [ 0.04638671875, 0.0859375 ], [ 0.05078125, 0.07861328125 ], [ 0...
The signal observation is associated with transmitter Mavic2AirS while the flight condition is status Flying in this capture.
When the activity state is Flying, what transmitter ID is associated with the capture for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06103515625, 0.0712890625 ], [ 0.05078125, 0.0693359375 ], [ 0.02978515625, 0.09033203125 ], [ 0.0234375, 0.09423828125 ], [ 0.041015625, 0.0771484375 ], [ 0.0556640625, 0.08203125 ], [ 0.041015625, 0.0986328125 ], [ 0.02685...
The current telemetry entry identifies transmitter Mavic2AirS with the signal showing Flying in the signal log.
Given status Flying, which RF source ID corresponds to the sample for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0732421875, 0.07861328125 ], [ 0.05517578125, 0.1015625 ], [ 0.02197265625, 0.10107421875 ], [ 0.03173828125, 0.06982421875 ], [ 0.068359375, 0.06640625 ], [ 0.07421875, 0.09326171875 ], [ 0.0556640625, 0.1005859375 ], [ 0.0...
The monitoring log lists the transmitter as Mavic2AirS with the operating condition set to Flying in the labeled example.
For a signal in Flying state, which source transmitter should be assigned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0556640625, 0.09765625 ], [ 0.048828125, 0.10302734375 ], [ 0.052734375, 0.0810546875 ], [ 0.05224609375, 0.05908203125 ], [ 0.04443359375, 0.07275390625 ], [ 0.03369140625, 0.0859375 ], [ 0.0322265625, 0.0849609375 ], [ 0.0...
The signal observation uses transmitter ID Mavic2AirS and the status field reads Flying in this capture.
In a sample labeled Flying, what is the source transmitter ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03759765625, 0.10205078125 ], [ 0.04638671875, 0.07861328125 ], [ 0.05615234375, 0.0712890625 ], [ 0.05126953125, 0.07861328125 ], [ 0.04833984375, 0.08349609375 ], [ 0.05810546875, 0.08740234375 ], [ 0.06201171875, 0.09619140625 ...
This DroneDetect sample points to source transmitter Mavic2AirS and the current mode Flying for the current observation.
For a signal in Flying state, what is the source transmitter ID for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.048828125, 0.0751953125 ], [ 0.02197265625, 0.0908203125 ], [ 0.03759765625, 0.0859375 ], [ 0.06103515625, 0.0810546875 ], [ 0.05322265625, 0.0908203125 ], [ 0.05126953125, 0.0888671875 ], [ 0.06494140625, 0.08203125 ], [ 0....
The received signal record lists the transmitter as Mavic2AirS under a recorded state of Flying for the current observation.
For the current mode Flying, what is the transmitter ID for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.046875, 0.08203125 ], [ 0.02294921875, 0.0986328125 ], [ 0.03173828125, 0.0966796875 ], [ 0.06494140625, 0.0859375 ], [ 0.07080078125, 0.0791015625 ], [ 0.05419921875, 0.0751953125 ], [ 0.056640625, 0.07275390625 ], [ 0.0498...
The received signal record records transmitter identifier Mavic2AirS and the observed status is the operating mode Flying in the dataset.
For this Flying observation, what source transmitter is indicated for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05078125, 0.09228515625 ], [ 0.05078125, 0.12109375 ], [ 0.04443359375, 0.1064453125 ], [ 0.0361328125, 0.08203125 ], [ 0.03759765625, 0.0888671875 ], [ 0.052734375, 0.10986328125 ], [ 0.04345703125, 0.09716796875 ], [ 0.015...
This RF capture is associated with transmitter Mavic2AirS and the observed status is the recorded status Flying for this sample.
When the recorded status is Flying, what is the source transmitter ID for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0517578125, 0.0771484375 ], [ 0.04052734375, 0.0830078125 ], [ 0.03564453125, 0.0771484375 ], [ 0.05224609375, 0.0888671875 ], [ 0.05908203125, 0.095703125 ], [ 0.048828125, 0.07861328125 ], [ 0.03125, 0.07373046875 ], [ 0.0...
The monitoring log identifies transmitter Mavic2AirS and the observed status is status Flying in the signal log.
In a sample labeled Flying, which transmitter code matches the signal for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04736328125, 0.07568359375 ], [ 0.05078125, 0.09228515625 ], [ 0.04931640625, 0.103515625 ], [ 0.05908203125, 0.09423828125 ], [ 0.06201171875, 0.07373046875 ], [ 0.05126953125, 0.0869140625 ], [ 0.05029296875, 0.107421875 ], [ ...
The current telemetry entry is associated with transmitter Mavic2AirS and the observed status is a Flying condition in this capture.
For an IQ segment marked Flying, which transmitter value belongs to the record for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0478515625, 0.0966796875 ], [ 0.0439453125, 0.10205078125 ], [ 0.05224609375, 0.0966796875 ], [ 0.06005859375, 0.076171875 ], [ 0.04833984375, 0.0595703125 ], [ 0.03759765625, 0.0791015625 ], [ 0.04833984375, 0.107421875 ], [ ...
The recorded drone signal records transmitter identifier Mavic2AirS with status classified as the current mode Flying in the signal log.
When the activity state is Flying, which transmitter value belongs to the record for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0546875, 0.0703125 ], [ 0.0556640625, 0.07080078125 ], [ 0.06396484375, 0.09619140625 ], [ 0.0625, 0.10888671875 ], [ 0.04345703125, 0.09716796875 ], [ 0.03369140625, 0.09326171875 ], [ 0.03271484375, 0.1015625 ], [ 0.037597...
The monitoring log marks Mavic2AirS as the transmitter and the status field reads the activity state Flying in the processed record.
For an IQ segment marked Flying, which transmitter value belongs to the record for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03515625, 0.11328125 ], [ 0.0322265625, 0.109375 ], [ 0.037109375, 0.07568359375 ], [ 0.03955078125, 0.0654296875 ], [ 0.0498046875, 0.0947265625 ], [ 0.0546875, 0.0986328125 ], [ 0.0439453125, 0.0771484375 ], [ 0.0375976562...
This DroneDetect sample marks Mavic2AirS as the transmitter and the recorded status Flying for the current observation.
When the recorded status is Flying, what transmitting unit should be labeled for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.11083984375 ], [ 0.03173828125, 0.09716796875 ], [ 0.03271484375, 0.08154296875 ], [ 0.0478515625, 0.0732421875 ], [ 0.0478515625, 0.0703125 ], [ 0.0361328125, 0.06982421875 ], [ 0.03759765625, 0.078125 ], [ 0...
The monitoring log marks Mavic2AirS as the transmitter while Flying in the labeled example.
For this Flying observation, what transmitter ID is associated with the capture for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05126953125, 0.08203125 ], [ 0.0341796875, 0.08203125 ], [ 0.0390625, 0.091796875 ], [ 0.05322265625, 0.10205078125 ], [ 0.05810546875, 0.09375 ], [ 0.05615234375, 0.0869140625 ], [ 0.0546875, 0.0859375 ], [ 0.04638671875, ...
The current telemetry entry records transmitter identifier Mavic2AirS and the Flying state in this capture.
For an IQ segment marked Flying, which source transmitter should be assigned for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0517578125, 0.0908203125 ], [ 0.04833984375, 0.0732421875 ], [ 0.05078125, 0.06298828125 ], [ 0.0517578125, 0.0615234375 ], [ 0.04541015625, 0.078125 ], [ 0.04052734375, 0.0966796875 ], [ 0.02978515625, 0.08837890625 ], [ 0....
This RF capture reports the source as Mavic2AirS and the observed status is status Flying for this sample.
Using the status value Flying, what transmitting unit should be labeled for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06640625, 0.0927734375 ], [ 0.05615234375, 0.0966796875 ], [ 0.0390625, 0.08056640625 ], [ 0.0419921875, 0.0625 ], [ 0.048828125, 0.08154296875 ], [ 0.0419921875, 0.1083984375 ], [ 0.0361328125, 0.1005859375 ], [ 0.050292968...
The current telemetry entry identifies transmitter Mavic2AirS with status classified as the recorded status Flying in the processed record.
For the current mode Flying, which transmitter code matches the signal for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0361328125, 0.076171875 ], [ 0.03515625, 0.09130859375 ], [ 0.05615234375, 0.08203125 ], [ 0.05859375, 0.0634765625 ], [ 0.04052734375, 0.052734375 ], [ 0.02978515625, 0.0673828125 ], [ 0.0478515625, 0.0888671875 ], [ 0.0546...
This dataset item reports the source as Mavic2AirS while a Flying condition in the processed record.
For an IQ segment marked Flying, what source device ID should be returned for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.02978515625, 0.0546875 ], [ 0.03466796875, 0.0673828125 ], [ 0.0556640625, 0.08203125 ], [ 0.05615234375, 0.07861328125 ], [ 0.0546875, 0.078125 ], [ 0.06103515625, 0.1015625 ], [ 0.05126953125, 0.107421875 ], [ 0.0307617187...
This RF capture uses transmitter ID Mavic2AirS while the flight state Flying for model training.
Given status Flying, what source device ID should be returned for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05517578125, 0.0810546875 ], [ 0.0517578125, 0.0869140625 ], [ 0.05224609375, 0.0859375 ], [ 0.05517578125, 0.07763671875 ], [ 0.05322265625, 0.068359375 ], [ 0.04833984375, 0.0615234375 ], [ 0.04443359375, 0.06982421875 ], [ ...
The signal observation is associated with transmitter Mavic2AirS with the operating condition set to Flying for this IQ window.
Using the status value Flying, what is the source transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.0927734375 ], [ 0.04541015625, 0.078125 ], [ 0.04541015625, 0.0966796875 ], [ 0.04345703125, 0.12109375 ], [ 0.04296875, 0.09912109375 ], [ 0.0439453125, 0.07666015625 ], [ 0.046875, 0.0810546875 ], [ 0.040039...
The analyzed transmission uses transmitter ID Mavic2AirS and the observed status is Flying for model training.
In a sample labeled Flying, please provide the transmitter identifier for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.08251953125 ], [ 0.0546875, 0.06103515625 ], [ 0.05908203125, 0.0849609375 ], [ 0.048828125, 0.09033203125 ], [ 0.03857421875, 0.07177734375 ], [ 0.04541015625, 0.07666015625 ], [ 0.06640625, 0.09814453125 ], [ ...
The recorded drone signal uses transmitter ID Mavic2AirS and the observed status is the Flying state in the processed record.
In a sample labeled Flying, which transmitter identifier fits this observation for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03466796875, 0.08349609375 ], [ 0.052734375, 0.07275390625 ], [ 0.064453125, 0.0927734375 ], [ 0.04150390625, 0.0986328125 ], [ 0.02001953125, 0.0810546875 ], [ 0.0322265625, 0.0693359375 ], [ 0.06103515625, 0.07470703125 ], [ ...
The captured IQ segment reports the source as Mavic2AirS with the operating condition set to the flight state Flying in the signal log.
For a signal in Flying state, which transmitter code matches the signal for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03466796875, 0.09521484375 ], [ 0.025390625, 0.08056640625 ], [ 0.05126953125, 0.0634765625 ], [ 0.0556640625, 0.08544921875 ], [ 0.03955078125, 0.099609375 ], [ 0.0419921875, 0.0859375 ], [ 0.0556640625, 0.07568359375 ], [ ...
The received signal record records transmitter identifier Mavic2AirS and the observed status is the recorded status Flying in the signal log.
For this Flying observation, which source transmitter should be assigned for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04443359375, 0.0732421875 ], [ 0.052734375, 0.09716796875 ], [ 0.05517578125, 0.0927734375 ], [ 0.05078125, 0.0693359375 ], [ 0.048828125, 0.0654296875 ], [ 0.05419921875, 0.0830078125 ], [ 0.052734375, 0.0869140625 ], [ 0.0...
This RF capture assigns transmitter code Mavic2AirS with the signal showing the flight state Flying in the labeled example.
For this Flying observation, which transmitter identifier fits this observation for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.021484375, 0.08203125 ], [ 0.0478515625, 0.09423828125 ], [ 0.06103515625, 0.0849609375 ], [ 0.0478515625, 0.08203125 ], [ 0.04052734375, 0.087890625 ], [ 0.04150390625, 0.087890625 ], [ 0.03564453125, 0.0888671875 ], [ 0.04...
This RF capture identifies transmitter Mavic2AirS while the flight condition is the label Flying for model training.
For this Flying observation, can you identify the transmitter ID for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.041015625, 0.08203125 ], [ 0.0654296875, 0.08251953125 ], [ 0.07177734375, 0.07373046875 ], [ 0.0625, 0.0927734375 ], [ 0.05078125, 0.10595703125 ], [ 0.04345703125, 0.08154296875 ], [ 0.05419921875, 0.06494140625 ], [ 0.060...
The received signal record comes from transmitter Mavic2AirS where the drone state is the activity state Flying in the dataset.
When the activity state is Flying, please provide the transmitter identifier for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.041015625, 0.10693359375 ], [ 0.03564453125, 0.09765625 ], [ 0.04443359375, 0.0751953125 ], [ 0.05322265625, 0.0771484375 ], [ 0.0625, 0.1103515625 ], [ 0.05712890625, 0.12109375 ], [ 0.041015625, 0.0888671875 ], [ 0.0297851...
The monitoring log points to source transmitter Mavic2AirS under a recorded state of the operating mode Flying in the labeled example.
Given status Flying, what source transmitter is indicated for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04833984375, 0.08984375 ], [ 0.037109375, 0.08935546875 ], [ 0.02978515625, 0.08251953125 ], [ 0.02685546875, 0.078125 ], [ 0.037109375, 0.08251953125 ], [ 0.05322265625, 0.087890625 ], [ 0.05615234375, 0.08984375 ], [ 0.047...
The current telemetry entry records transmitter identifier Mavic2AirS and a Flying condition in the dataset.
For this Flying observation, what is the source transmitter ID for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0234375, 0.0712890625 ], [ 0.0341796875, 0.072265625 ], [ 0.052734375, 0.0751953125 ], [ 0.04833984375, 0.08642578125 ], [ 0.0322265625, 0.0888671875 ], [ 0.03271484375, 0.07470703125 ], [ 0.05615234375, 0.07763671875 ], [ 0...
The recorded drone signal comes from transmitter Mavic2AirS with status classified as the Flying state in the signal log.
With the drone status known as Flying, what source device ID should be returned for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0439453125, 0.1015625 ], [ 0.03369140625, 0.0869140625 ], [ 0.0341796875, 0.07861328125 ], [ 0.0390625, 0.0859375 ], [ 0.03759765625, 0.0927734375 ], [ 0.03759765625, 0.09326171875 ], [ 0.041015625, 0.08740234375 ], [ 0.0561...
This dataset item uses transmitter ID Mavic2AirS while the Flying state in the labeled example.
For the current mode Flying, which transmitter ID should be reported for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.064453125, 0.11181640625 ], [ 0.0234375, 0.09765625 ], [ 0.02001953125, 0.07080078125 ], [ 0.0517578125, 0.056640625 ], [ 0.087890625, 0.064453125 ], [ 0.08544921875, 0.08740234375 ], [ 0.04736328125, 0.09765625 ], [ 0.01513...
The received signal record identifies transmitter Mavic2AirS with the operating condition set to a Flying condition in the signal log.
Using the status value Flying, which transmitter value belongs to the record for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.056640625, 0.0732421875 ], [ 0.06103515625, 0.06689453125 ], [ 0.04443359375, 0.0732421875 ], [ 0.0390625, 0.080078125 ], [ 0.052734375, 0.0927734375 ], [ 0.06396484375, 0.107421875 ], [ 0.05126953125, 0.10888671875 ], [ 0.0...
The signal observation comes from transmitter Mavic2AirS with status classified as the flight state Flying for the current observation.
With the drone status known as Flying, what is the transmitting unit ID for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.02880859375, 0.06494140625 ], [ 0.0517578125, 0.0849609375 ], [ 0.0732421875, 0.10498046875 ], [ 0.05322265625, 0.0966796875 ], [ 0.03369140625, 0.080078125 ], [ 0.04248046875, 0.0830078125 ], [ 0.05322265625, 0.09326171875 ], [...
The received signal record records transmitter identifier Mavic2AirS and the status field reads the Flying state in the processed record.
For the current mode Flying, what transmitter ID is associated with the capture for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03759765625, 0.0927734375 ], [ 0.04248046875, 0.068359375 ], [ 0.04638671875, 0.0615234375 ], [ 0.04833984375, 0.0888671875 ], [ 0.05078125, 0.1123046875 ], [ 0.046875, 0.1044921875 ], [ 0.03564453125, 0.0830078125 ], [ 0.03...
This DroneDetect sample marks Mavic2AirS as the transmitter where the drone state is the current mode Flying for the current observation.
Using the status value Flying, please provide the transmitter identifier for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.09765625 ], [ 0.0390625, 0.107421875 ], [ 0.05712890625, 0.091796875 ], [ 0.06005859375, 0.0810546875 ], [ 0.04443359375, 0.08203125 ], [ 0.03564453125, 0.0830078125 ], [ 0.05322265625, 0.08544921875 ], [ 0.06...
This RF capture marks Mavic2AirS as the transmitter and the observed status is the Flying state for this sample.
Given status Flying, please provide the transmitter identifier for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03271484375, 0.07275390625 ], [ 0.02587890625, 0.06591796875 ], [ 0.0341796875, 0.08544921875 ], [ 0.0439453125, 0.10498046875 ], [ 0.04248046875, 0.0908203125 ], [ 0.04833984375, 0.064453125 ], [ 0.06396484375, 0.07421875 ], [ ...
The analyzed transmission assigns transmitter code Mavic2AirS under a recorded state of the operating mode Flying for the current observation.
Using the status value Flying, which source transmitter should be assigned for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.02783203125, 0.09765625 ], [ 0.046875, 0.09326171875 ], [ 0.06689453125, 0.080078125 ], [ 0.05615234375, 0.06982421875 ], [ 0.025390625, 0.0673828125 ], [ 0.02099609375, 0.07861328125 ], [ 0.04931640625, 0.0849609375 ], [ 0....
The current telemetry entry lists the transmitter as Mavic2AirS with status classified as status Flying in the processed record.
Given status Flying, which transmitter ID should be reported for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05517578125, 0.1025390625 ], [ 0.04150390625, 0.0888671875 ], [ 0.046875, 0.06591796875 ], [ 0.05419921875, 0.0625 ], [ 0.041015625, 0.0712890625 ], [ 0.0322265625, 0.0771484375 ], [ 0.04736328125, 0.08447265625 ], [ 0.05712...
This RF capture assigns transmitter code Mavic2AirS under a recorded state of the activity state Flying for this IQ window.
For a signal in Flying state, what transmitter identifier should be used for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05615234375, 0.091796875 ], [ 0.0439453125, 0.08935546875 ], [ 0.041015625, 0.0927734375 ], [ 0.05615234375, 0.0849609375 ], [ 0.06201171875, 0.076171875 ], [ 0.05517578125, 0.09326171875 ], [ 0.04833984375, 0.111328125 ], [ ...
The signal observation lists the transmitter as Mavic2AirS with the signal showing the Flying state in the signal log.
For a signal in Flying state, what source device ID should be returned for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05517578125, 0.08837890625 ], [ 0.06298828125, 0.0966796875 ], [ 0.0634765625, 0.0908203125 ], [ 0.05908203125, 0.08251953125 ], [ 0.05224609375, 0.07763671875 ], [ 0.04443359375, 0.08984375 ], [ 0.0478515625, 0.0966796875 ], [ ...
The signal observation points to source transmitter Mavic2AirS under a recorded state of the operating mode Flying for model training.
In a sample labeled Flying, which transmitter identifier fits this observation for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05859375, 0.0986328125 ], [ 0.041015625, 0.0849609375 ], [ 0.0517578125, 0.0791015625 ], [ 0.06787109375, 0.09033203125 ], [ 0.05810546875, 0.1005859375 ], [ 0.03955078125, 0.10302734375 ], [ 0.04443359375, 0.08740234375 ], [ ...
The analyzed transmission comes from transmitter Mavic2AirS and the status field reads the label Flying in the signal log.
When the activity state is Flying, please determine the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03125, 0.09912109375 ], [ 0.03515625, 0.0849609375 ], [ 0.05322265625, 0.07861328125 ], [ 0.05859375, 0.087890625 ], [ 0.05517578125, 0.0947265625 ], [ 0.05615234375, 0.0927734375 ], [ 0.0400390625, 0.0966796875 ], [ 0.02783...
The recorded drone signal records transmitter identifier Mavic2AirS with status classified as the current mode Flying in the signal log.
When the recorded status is Flying, what transmitter identifier should be used for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05224609375, 0.1044921875 ], [ 0.037109375, 0.0927734375 ], [ 0.02685546875, 0.064453125 ], [ 0.0478515625, 0.0673828125 ], [ 0.07177734375, 0.095703125 ], [ 0.05712890625, 0.09765625 ], [ 0.03955078125, 0.08056640625 ], [ 0...
The recorded drone signal assigns transmitter code Mavic2AirS and the status field reads the activity state Flying for this IQ window.
Using the status value Flying, what source transmitter is indicated for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.0830078125 ], [ 0.04736328125, 0.10302734375 ], [ 0.0654296875, 0.0859375 ], [ 0.06787109375, 0.07861328125 ], [ 0.03857421875, 0.091796875 ], [ 0.0234375, 0.1025390625 ], [ 0.05224609375, 0.09765625 ], [ 0.07...
This dataset item marks Mavic2AirS as the transmitter and the current mode Flying in the labeled example.
When the recorded status is Flying, what is the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03759765625, 0.07861328125 ], [ 0.04150390625, 0.10009765625 ], [ 0.0419921875, 0.0947265625 ], [ 0.04833984375, 0.0703125 ], [ 0.044921875, 0.06640625 ], [ 0.04150390625, 0.0830078125 ], [ 0.05712890625, 0.0927734375 ], [ 0...
The signal observation is associated with transmitter Mavic2AirS under a recorded state of a Flying condition for this sample.
Given status Flying, which RF source ID corresponds to the sample for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03515625, 0.08447265625 ], [ 0.05712890625, 0.10107421875 ], [ 0.05419921875, 0.10498046875 ], [ 0.052734375, 0.087890625 ], [ 0.05810546875, 0.078125 ], [ 0.04833984375, 0.07470703125 ], [ 0.03955078125, 0.07373046875 ], [ ...
This RF capture assigns transmitter code Mavic2AirS with the signal showing the recorded status Flying.
When the recorded status is Flying, which transmitter identifier fits this observation for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03271484375, 0.0849609375 ], [ 0.03564453125, 0.09423828125 ], [ 0.04833984375, 0.1083984375 ], [ 0.0556640625, 0.09228515625 ], [ 0.0439453125, 0.05517578125 ], [ 0.03662109375, 0.0615234375 ], [ 0.04736328125, 0.1044921875 ], ...
The recorded drone signal records transmitter identifier Mavic2AirS and the observed status is the activity state Flying in the signal log.
For this Flying observation, what source transmitter is indicated for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0439453125, 0.08203125 ], [ 0.05322265625, 0.0771484375 ], [ 0.05078125, 0.07861328125 ], [ 0.037109375, 0.091796875 ], [ 0.0439453125, 0.095703125 ], [ 0.05517578125, 0.0810546875 ], [ 0.04248046875, 0.06982421875 ], [ 0.02...
This dataset item marks Mavic2AirS as the transmitter with the operating condition set to the Flying state in the labeled example.
With the drone status known as Flying, what transmitter label should be recorded for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06201171875, 0.0810546875 ], [ 0.04345703125, 0.09375 ], [ 0.0244140625, 0.099609375 ], [ 0.02587890625, 0.0849609375 ], [ 0.041015625, 0.06689453125 ], [ 0.04736328125, 0.0791015625 ], [ 0.0478515625, 0.1005859375 ], [ 0.05...
The received signal record is associated with transmitter Mavic2AirS under a recorded state of the operating mode Flying for the current observation.
With the drone status known as Flying, please determine the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03662109375, 0.10986328125 ], [ 0.04248046875, 0.11669921875 ], [ 0.04541015625, 0.08544921875 ], [ 0.04248046875, 0.0673828125 ], [ 0.03271484375, 0.076171875 ], [ 0.0400390625, 0.09228515625 ], [ 0.05615234375, 0.07958984375 ], ...
The signal observation reports the source as Mavic2AirS under a recorded state of the recorded status Flying in the signal log.
When the recorded status is Flying, what is the source transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.037109375, 0.09375 ], [ 0.06298828125, 0.0927734375 ], [ 0.06787109375, 0.08984375 ], [ 0.046875, 0.10205078125 ], [ 0.02783203125, 0.099609375 ], [ 0.03125, 0.076171875 ], [ 0.03564453125, 0.06591796875 ], [ 0.03955078125, ...
This RF capture uses transmitter ID Mavic2AirS with the operating condition set to the operating mode Flying for model training.
With the drone status known as Flying, what is the source transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03076171875, 0.0849609375 ], [ 0.037109375, 0.08056640625 ], [ 0.0400390625, 0.0791015625 ], [ 0.0400390625, 0.07470703125 ], [ 0.048828125, 0.07177734375 ], [ 0.05029296875, 0.07080078125 ], [ 0.0361328125, 0.07568359375 ], [ ...
The signal observation reports the source as Mavic2AirS and the status field reads the flight state Flying in the dataset.
For this Flying observation, which emitting transmitter produced the signal for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0625, 0.0712890625 ], [ 0.05615234375, 0.09423828125 ], [ 0.04931640625, 0.08984375 ], [ 0.04833984375, 0.08154296875 ], [ 0.04248046875, 0.0927734375 ], [ 0.03759765625, 0.0947265625 ], [ 0.03955078125, 0.08154296875 ], [ 0...
The monitoring log is associated with transmitter Mavic2AirS and the recorded status Flying for this sample.
In a sample labeled Flying, which transmitter value belongs to the record for the monitored transmission?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.046875, 0.09326171875 ], [ 0.05615234375, 0.10302734375 ], [ 0.05078125, 0.1142578125 ], [ 0.033203125, 0.095703125 ], [ 0.04248046875, 0.0693359375 ], [ 0.056640625, 0.0830078125 ], [ 0.0390625, 0.1240234375 ], [ 0.00830078...
The analyzed transmission uses transmitter ID Mavic2AirS and the activity state Flying in the processed record.
Given status Flying, which transmitter ID should be reported for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04052734375, 0.05078125 ], [ 0.04248046875, 0.08837890625 ], [ 0.05078125, 0.11669921875 ], [ 0.04248046875, 0.07861328125 ], [ 0.0400390625, 0.0380859375 ], [ 0.04248046875, 0.06396484375 ], [ 0.04248046875, 0.08984375 ], [ ...
This RF capture assigns transmitter code Mavic2AirS under a recorded state of the activity state Flying for this IQ window.
Given status Flying, which transmitter ID should be reported for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04931640625, 0.06689453125 ], [ 0.05908203125, 0.08154296875 ], [ 0.0400390625, 0.08447265625 ], [ 0.0341796875, 0.0654296875 ], [ 0.0625, 0.0703125 ], [ 0.072265625, 0.095703125 ], [ 0.04150390625, 0.10791015625 ], [ 0.0195...
The current telemetry entry uses transmitter ID Mavic2AirS where the drone state is a Flying condition for model training.
Given status Flying, please determine the transmitter ID for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05615234375, 0.0849609375 ], [ 0.04931640625, 0.08984375 ], [ 0.02587890625, 0.07080078125 ], [ 0.02685546875, 0.06494140625 ], [ 0.04833984375, 0.08154296875 ], [ 0.05517578125, 0.0869140625 ], [ 0.041015625, 0.07666015625 ], [...
The current telemetry entry is associated with transmitter Mavic2AirS with the signal showing the current mode Flying in the processed record.
In a sample labeled Flying, what transmitting unit should be labeled for the dataset entry?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04736328125, 0.07177734375 ], [ 0.03173828125, 0.0771484375 ], [ 0.037109375, 0.0810546875 ], [ 0.04638671875, 0.07421875 ], [ 0.037109375, 0.080078125 ], [ 0.0400390625, 0.0927734375 ], [ 0.05615234375, 0.08935546875 ], [ 0...
The monitoring log points to source transmitter Mavic2AirS under a recorded state of the operating mode Flying in the labeled example.
In a sample labeled Flying, what transmitter identifier should be used for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04638671875, 0.056640625 ], [ 0.05908203125, 0.05078125 ], [ 0.04833984375, 0.0791015625 ], [ 0.03515625, 0.09130859375 ], [ 0.0498046875, 0.0810546875 ], [ 0.06640625, 0.0771484375 ], [ 0.05615234375, 0.0830078125 ], [ 0.04...
The captured IQ segment identifies transmitter Mavic2AirS while the Flying state in the signal log.
Using the status value Flying, what is the transmitting unit ID for this observation?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0478515625, 0.09228515625 ], [ 0.03369140625, 0.09228515625 ], [ 0.0390625, 0.08642578125 ], [ 0.04833984375, 0.078125 ], [ 0.0556640625, 0.064453125 ], [ 0.060546875, 0.0634765625 ], [ 0.046875, 0.0908203125 ], [ 0.03076171...
The recorded drone signal reports the source as Mavic2AirS while the flight state Flying in the dataset.
When the activity state is Flying, which transmitter ID should be reported for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06103515625, 0.1015625 ], [ 0.06982421875, 0.09521484375 ], [ 0.0556640625, 0.091796875 ], [ 0.0498046875, 0.09033203125 ], [ 0.05615234375, 0.07666015625 ], [ 0.05419921875, 0.06884765625 ], [ 0.03662109375, 0.07763671875 ], [ ...
This DroneDetect sample lists the transmitter as Mavic2AirS with status classified as the current mode Flying in this capture.
Using the status value Flying, which transmitter value belongs to the record for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.07080078125, 0.0859375 ], [ 0.06396484375, 0.10546875 ], [ 0.0546875, 0.10205078125 ], [ 0.04052734375, 0.07373046875 ], [ 0.03564453125, 0.06982421875 ], [ 0.04345703125, 0.08984375 ], [ 0.05712890625, 0.08984375 ], [ 0.054...
The recorded drone signal comes from transmitter Mavic2AirS and the status field reads the Flying state in the signal log.
In a sample labeled Flying, what transmitter ID is associated with the capture for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06640625, 0.06591796875 ], [ 0.05908203125, 0.08935546875 ], [ 0.04345703125, 0.09912109375 ], [ 0.04833984375, 0.0927734375 ], [ 0.0517578125, 0.0947265625 ], [ 0.03173828125, 0.1015625 ], [ 0.02392578125, 0.0859375 ], [ 0....
The recorded drone signal uses transmitter ID Mavic2AirS with the signal showing the current mode Flying for this IQ window.
When the activity state is Flying, what transmitter identifier should be used for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0478515625, 0.0986328125 ], [ 0.04833984375, 0.087890625 ], [ 0.0478515625, 0.08642578125 ], [ 0.03369140625, 0.0927734375 ], [ 0.02001953125, 0.08544921875 ], [ 0.0322265625, 0.078125 ], [ 0.048828125, 0.08154296875 ], [ 0....
The signal observation reports the source as Mavic2AirS under a recorded state of the current mode Flying.
For this Flying observation, which transmitter ID should be reported for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.029296875, 0.06298828125 ], [ 0.03515625, 0.0546875 ], [ 0.04736328125, 0.07177734375 ], [ 0.037109375, 0.0908203125 ], [ 0.013671875, 0.08984375 ], [ 0.03515625, 0.0791015625 ], [ 0.064453125, 0.08544921875 ], [ 0.049316406...
The signal observation uses transmitter ID Mavic2AirS where the drone state is the label Flying for the current observation.
For this Flying observation, which source transmitter should be assigned for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.06103515625, 0.1083984375 ], [ 0.05810546875, 0.0869140625 ], [ 0.0439453125, 0.05859375 ], [ 0.05126953125, 0.0634765625 ], [ 0.06396484375, 0.0859375 ], [ 0.05615234375, 0.0966796875 ], [ 0.04296875, 0.0849609375 ], [ 0.04...
The captured IQ segment is associated with transmitter Mavic2AirS while the flight condition is the operating mode Flying for the current observation.
With the drone status known as Flying, which emitting transmitter produced the signal for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05029296875, 0.09423828125 ], [ 0.04931640625, 0.099609375 ], [ 0.03759765625, 0.10888671875 ], [ 0.0322265625, 0.10302734375 ], [ 0.04345703125, 0.095703125 ], [ 0.0625, 0.10205078125 ], [ 0.0634765625, 0.103515625 ], [ 0.0...
This DroneDetect sample comes from transmitter Mavic2AirS and the observed status is the operating mode Flying in the signal log.
Given status Flying, please provide the transmitter identifier for this sample?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.04541015625, 0.095703125 ], [ 0.03759765625, 0.1103515625 ], [ 0.0390625, 0.1044921875 ], [ 0.03515625, 0.0849609375 ], [ 0.03076171875, 0.07470703125 ], [ 0.04736328125, 0.0849609375 ], [ 0.07080078125, 0.1015625 ], [ 0.052...
This DroneDetect sample identifies transmitter Mavic2AirS where the drone state is the Flying state in the labeled example.
When the activity state is Flying, please provide the transmitter identifier for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0234375, 0.09765625 ], [ 0.03955078125, 0.08984375 ], [ 0.05859375, 0.0888671875 ], [ 0.048828125, 0.0947265625 ], [ 0.03759765625, 0.09375 ], [ 0.04345703125, 0.0888671875 ], [ 0.056640625, 0.0888671875 ], [ 0.05908203125, ...
The received signal record assigns transmitter code Mavic2AirS where the drone state is the current mode Flying for model training.
For an IQ segment marked Flying, what transmitter label should be recorded for the labeled example?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0439453125, 0.10107421875 ], [ 0.02392578125, 0.0703125 ], [ 0.0478515625, 0.0732421875 ], [ 0.06689453125, 0.09912109375 ], [ 0.04931640625, 0.091796875 ], [ 0.03564453125, 0.0849609375 ], [ 0.04248046875, 0.0986328125 ], [ ...
The recorded drone signal marks Mavic2AirS as the transmitter and the status field reads the operating mode Flying in the processed record.
When the recorded status is Flying, can you identify the transmitter ID for this DroneDetect item?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0556640625, 0.0810546875 ], [ 0.0517578125, 0.1015625 ], [ 0.033203125, 0.109375 ], [ 0.03173828125, 0.10595703125 ], [ 0.06005859375, 0.09033203125 ], [ 0.064453125, 0.0771484375 ], [ 0.03955078125, 0.0751953125 ], [ 0.0356...
This dataset item is associated with transmitter Mavic2AirS with status classified as the recorded status Flying in this capture.
With the drone status known as Flying, which transmitter value belongs to the record for the current record?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.05712890625, 0.0791015625 ], [ 0.07666015625, 0.0966796875 ], [ 0.06640625, 0.08984375 ], [ 0.04345703125, 0.0751953125 ], [ 0.04541015625, 0.06982421875 ], [ 0.06884765625, 0.08544921875 ], [ 0.0654296875, 0.08544921875 ], [ ...
The received signal record assigns transmitter code Mavic2AirS with the signal showing the Flying state for this sample.
Given status Flying, please provide the transmitter identifier for this IQ capture?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.03369140625, 0.0927734375 ], [ 0.04931640625, 0.0830078125 ], [ 0.068359375, 0.0869140625 ], [ 0.06103515625, 0.1044921875 ], [ 0.04248046875, 0.107421875 ], [ 0.033203125, 0.0947265625 ], [ 0.04248046875, 0.09423828125 ], [ ...
This RF capture is associated with transmitter Mavic2AirS with the signal showing the current mode Flying for this IQ window.
With the drone status known as Flying, what is the transmitter ID for the analyzed segment?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying
[ [ 0.0654296875, 0.0947265625 ], [ 0.0625, 0.0966796875 ], [ 0.0546875, 0.0595703125 ], [ 0.04296875, 0.0615234375 ], [ 0.03271484375, 0.0986328125 ], [ 0.03466796875, 0.1015625 ], [ 0.044921875, 0.06640625 ], [ 0.0546875, 0....
The captured IQ segment uses transmitter ID Mavic2AirS under a recorded state of a Flying condition for model training.
When the recorded status is Flying, please determine the transmitter ID for this signal?
2.4375 GHz
28 MHz
60 Mbits/s
4Mavic2AirS
2Flying