observation.state list | observation.velocity list | action list | source.action_time_s float32 | metadata.failure bool | metadata.route.active_subgoal int64 | metadata.subgoal_switch bool | metadata.arm_recording_key string | metadata.arm_recording_key_present bool | metadata.arming_key string | metadata.arming_key_present bool | metadata.camera_names string | metadata.can_interface_left string | metadata.can_interface_right string | metadata.completed_subgoal_count int64 | metadata.compress bool | metadata.config_path string | metadata.config_sha256 string | metadata.decision_key_map string | metadata.double_arm bool | metadata.error_recovery bool | metadata.error_recovery_probability float32 | metadata.failure_event_count int64 | metadata.fps float32 | metadata.labeling_snapshot_present bool | metadata.labeling_snapshot_present_present bool | metadata.partial_subgoal_start bool | metadata.pedal_key_map string | metadata.phase_count int64 | metadata.phase_labels string | metadata.recording_stop_event_present bool | metadata.robot_type string | metadata.route.completed_subgoal_count int64 | metadata.route.error_recovery bool | metadata.route.obstacle_board_xy_cm array 2D | metadata.route.obstacle_board_xy_cm_length int64 | metadata.route.obstacle_direction_board_xy array 2D | metadata.route.obstacle_direction_board_xy_length int64 | metadata.route.obstacle_theta_rad list | metadata.route.obstacle_theta_rad_length int64 | metadata.route.phase_labels string | metadata.route.phase_start_indices list | metadata.route.phase_start_indices_length int64 | metadata.route_label_schema_version int64 | metadata.route_schema_version int64 | metadata.sim bool | metadata.single_arm bool | metadata.start_gripper string | metadata.start_gripper_present bool | metadata.start_position_enabled bool | metadata.start_position_move_duration float32 | metadata.start_position_path string | metadata.subgoal_switch_event_count int64 | metadata.task_name string | metadata.task_variant string | metadata.use_camera_server bool | prompt string | timestamp float32 | frame_index int64 | episode_index int64 | index int64 | task_index int64 | metadata.route.selected_connector_index int64 | metadata.route.overlay_source_xy_224 list | metadata.route.overlay_direction_xy_224 list | metadata.route.overlay_theta_image_rad float32 | metadata.route.overlay_visible bool | metadata.route.overlay_style_version int64 | metadata.route.overlay_arrow_length_px float32 | metadata.route.overlay_arrow_width_px float32 | metadata.route.overlay_arrow_head_px float32 | metadata.route.overlay_dot_radius_px float32 | metadata.route.phase_label string | metadata.route.text_subtask string | metadata.split.source_episode_index int64 | metadata.split.source_frame_index int64 | metadata.split.source_start_frame int64 | metadata.split.source_end_frame_exclusive int64 | metadata.split.segment_ordinal int64 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0812921524047852,
0.050545692443847656,
0.049401283264160156,
0.00039433580241166055,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.06275272369384766,
-0.01964569091796875,
0.00246080826036... | [
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.1868133544921875,
-0.07692337036132812,
-0.22278992831707,
-0.03296661376953125,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.03296661376953125,
-0.07692337036132812,
0.000... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0812921524047852,
0.050545692443847656,
0.049401283264160156,
0.00039433580241166055,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.06275272369384766,
-0.01964569091796875,
0.00246080826036... | 0 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0 | 0 | 0 | 0 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 0 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0812921524047852,
0.051308631896972656,
0.050164222717285156,
-0.0009445871110074222,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.06275272369384766,
-0.01964569091796875,
0.00246080826036... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.0549468994140625,
0.0549468994140625,
-0.18756622076034546,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0812921524047852,
0.051308631896972656,
0.050164222717285156,
-0.0009445871110074222,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.06275272369384766,
-0.01964569091796875,
0.00246080826036... | 0.01 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.01 | 1 | 0 | 1 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 1 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0816736221313477,
0.051308631896972656,
0.050927162170410156,
-0.0018005251185968518,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | [
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
-0.010990142822265625,
0.09889984130859375,
-0.1097218319773674,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0816736221313477,
0.051308631896972656,
0.050927162170410156,
-0.0018005251185968518,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | 0.02 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.02 | 2 | 0 | 2 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 2 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0820550918579102,
0.051308631896972656,
0.050927162170410156,
-0.0019350271904841065,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | [
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.004755200818181038,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.0549468994140625,
... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0820550918579102,
0.051308631896972656,
0.050927162170410156,
-0.0019350271904841065,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | 0.03 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.03 | 3 | 0 | 3 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 3 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0816736221313477,
0.052453041076660156,
0.050927162170410156,
-0.0015009369235485792,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.09889984130859375,
0.03296661376953125,
0.0549468994140625,
0.07625935226678848,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.0549468994140625,
0.010990142822265625,
-0.0... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0816736221313477,
0.052453041076660156,
0.050927162170410156,
-0.0015009369235485792,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | 0.04 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.04 | 4 | 0 | 4 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 4 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0809106826782227,
0.052453041076660156,
0.051690101623535156,
-0.0008773360750637949,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.09889984130859375,
0.03296661376953125,
0.120880126953125,
0.09704133868217468,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
-0.0549468994140625,
-0.000... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0809106826782227,
0.052453041076660156,
0.051690101623535156,
-0.0008773360750637949,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | 0.05 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.05 | 5 | 0 | 5 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 5 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0801477432250977,
0.052071571350097656,
0.053978919982910156,
0.00045547314221039414,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.07692337036132812,
-0.0549468994140625,
0.120880126953125,
0.0959845781326294,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.07692337036132812,
-0.03296661376953125,
-0.0... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0801477432250977,
0.052071571350097656,
0.053978919982910156,
0.00045547314221039414,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.062371253967285156,
-0.01964569091796875,
0.0024608082603... | 0.06 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.06 | 6 | 0 | 6 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 6 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0797662734985352,
0.052071571350097656,
0.057030677795410156,
0.0010729755740612745,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.060463905334472656,
-0.02002716064453125,
0.00246080826036... | [
-0.03296661376953125,
-0.010990142822265625,
-0.03296661376953125,
0.09889984130859375,
-0.0549468994140625,
0.5604400634765625,
0.09070102870464325,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.07692337036132812,
-0.14285659790039062,
-0.03296661376953125,
-0.000... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0797662734985352,
0.052071571350097656,
0.057030677795410156,
0.0010729755740612745,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.060463905334472656,
-0.02002716064453125,
0.00246080826036... | 0.07 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.07 | 7 | 0 | 7 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 7 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0793848037719727,
0.052453041076660156,
0.061989784240722656,
0.001690477947704494,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.059700965881347656,
-0.02002716064453125,
0.002460808260366... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.868133544921875,
0.08964432775974274,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.07692337036132812,
-0.1868133544921875,
-0.010990142822265625,
... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0793848037719727,
0.052453041076660156,
0.061989784240722656,
0.001690477947704494,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.059700965881347656,
-0.02002716064453125,
0.002460808260366... | 0.08 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.08 | 8 | 0 | 8 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 8 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0793848037719727,
0.052453041076660156,
0.06923770904541016,
0.0022468275856226683,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.059700965881347656,
-0.02002716064453125,
0.002460808260366... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
1.0659332275390625,
0.08189511299133301,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.03296661376953125,
-0.1868133544921875,
-0.03296661376953125,
0.... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0793848037719727,
0.052453041076660156,
0.06923770904541016,
0.0022468275856226683,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.059700965881347656,
-0.02002716064453125,
0.002460808260366... | 0.09 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.09 | 9 | 0 | 9 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 9 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0797662734985352,
0.053215980529785156,
0.07686710357666016,
0.002723714103922248,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.058938026428222656,
-0.02040863037109375,
0.0024608082603663... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
1.131866455078125,
0.06533997505903244,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.09889984130859375,
-0.0549468994140625,
-... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0797662734985352,
0.053215980529785156,
0.07686710357666016,
0.002723714103922248,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.058938026428222656,
-0.02040863037109375,
0.0024608082603663... | 0.1 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.1 | 10 | 0 | 10 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 10 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0801477432250977,
0.052453041076660156,
0.08335208892822266,
0.0030416282825171947,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.058556556701660156,
-0.02079010009765625,
0.002460808260366... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.09889984130859375,
-0.07692337036132812,
0.9120864868164062,
0.04138783738017082,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.120880126953125,
-0.07692337036132812,
0.... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0801477432250977,
0.052453041076660156,
0.08335208892822266,
0.0030416282825171947,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.058556556701660156,
-0.02079010009765625,
0.002460808260366... | 0.11 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.11 | 11 | 0 | 11 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 11 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0805292129516602,
0.052071571350097656,
0.08869266510009766,
0.0032066991552710533,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.056267738342285156,
-0.02079010009765625,
0.002466922160238... | [
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.07692337036132812,
-0.0549468994140625,
0.8241767883300781,
0.01743575744330883,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
0.010990142822265625,
-0.2967033386230469,
-0.07692337036132812,
0.00... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0805292129516602,
0.052071571350097656,
0.08869266510009766,
0.0032066991552710533,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.056267738342285156,
-0.02079010009765625,
0.002466922160238... | 0.12 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.12 | 12 | 0 | 12 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 12 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0805292129516602,
0.051690101623535156,
0.09937477111816406,
0.003102765651419759,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.055123329162597656,
-0.02155303955078125,
0.0024669221602380... | [
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.07692337036132812,
0.8461532592773438,
-0.01743575744330883,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.1868133544921875,
-0.14285659790039062,
-0... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0805292129516602,
0.051690101623535156,
0.09937477111816406,
0.003102765651419759,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.055123329162597656,
-0.02155303955078125,
0.0024669221602380... | 0.13 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.13 | 13 | 0 | 13 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 13 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0805292129516602,
0.051308631896972656,
0.10433387756347656,
0.002962149679660797,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.051308631896972656,
-0.02422332763671875,
0.0024669221602380... | [
0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
0.6483497619628906,
-0.02201482094824314,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.4505500793457031,
-0.14285659790039062,
0... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0805292129516602,
0.051308631896972656,
0.10433387756347656,
0.002962149679660797,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.051308631896972656,
-0.02422332763671875,
0.0024669221602380... | 0.14 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.14 | 14 | 0 | 14 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 14 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0801477432250977,
0.051308631896972656,
0.10814857482910156,
0.0027787378057837486,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.049019813537597656,
-0.02460479736328125,
0.002466922160238... | [
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
0.03296661376953125,
0.010990142822265625,
0.5164833068847656,
-0.03011625073850155,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.4505500793457031,
-0.07692337036132812,
-0.... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0801477432250977,
0.051308631896972656,
0.10814857482910156,
0.0027787378057837486,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.049019813537597656,
-0.02460479736328125,
0.002466922160238... | 0.15 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.15 | 15 | 0 | 15 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 15 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0790033340454102,
0.051308631896972656,
0.11120033264160156,
0.002558643463999033,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.046349525451660156,
-0.02498626708984375,
0.0024669221602380... | [
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
0.14285659790039062,
0.010990142822265625,
0.2967033386230469,
-0.033286407589912415,
-0.010990142822265625,
0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
-0.3626365661621094,
-0.0549468994140625,
0.00... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0790033340454102,
0.051308631896972656,
0.11120033264160156,
0.002558643463999033,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.046349525451660156,
-0.02498626708984375,
0.0024669221602380... | 0.16 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.16 | 16 | 0 | 16 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 16 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0774774551391602,
0.051308631896972656,
0.11310768127441406,
0.002338533755391836,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.043679237365722656,
-0.02536773681640625,
0.0024730358272790... | [
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
0.34066009521484375,
-0.010990142822265625,
0.2967033386230469,
-0.0322297066450119,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.4945068359375,
-0.07692337036132812,
0.0001... | [
-0.9901199340820312,
0.2798118591308594,
0.7795448303222656,
-1.0774774551391602,
0.051308631896972656,
0.11310768127441406,
0.002338533755391836,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.043679237365722656,
-0.02536773681640625,
0.0024730358272790... | 0.17 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.17 | 17 | 0 | 17 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 17 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2801933288574219,
0.7795448303222656,
-1.0755701065063477,
0.051308631896972656,
0.11501502990722656,
0.002130666747689247,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.043679237365722656,
-0.02613067626953125,
0.0024608082603663... | [
0.010990142822265625,
0.09889984130859375,
-0.010990142822265625,
0.25274658203125,
0.0549468994140625,
0.1868133544921875,
-0.030468525364995003,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.4945068359375,
-0.09889984130859375,
-0.0012328344... | [
-0.9901199340820312,
0.2801933288574219,
0.7795448303222656,
-1.0755701065063477,
0.051308631896972656,
0.11501502990722656,
0.002130666747689247,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.043679237365722656,
-0.02613067626953125,
0.0024608082603663... | 0.18 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.18 | 18 | 0 | 18 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 18 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2821016311645508,
0.7795448303222656,
-1.0698480606079102,
0.053215980529785156,
0.11768531799316406,
0.0017271602991968393,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.041390419006347656,
-0.02651214599609375,
0.002466922160238... | [
-0.010990142822265625,
0.5824165344238281,
-0.010990142822265625,
0.47252655029296875,
0.23077011108398438,
0.16483688354492188,
-0.030820736661553383,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
-0.4505500793457031,
-0.07692337036132812,
0.000... | [
-0.9901199340820312,
0.2821016311645508,
0.7795448303222656,
-1.0698480606079102,
0.053215980529785156,
0.11768531799316406,
0.0017271602991968393,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.041390419006347656,
-0.02651214599609375,
0.002466922160238... | 0.19 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.19 | 19 | 0 | 19 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 19 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2840089797973633,
0.7795448303222656,
-1.0664148330688477,
0.053215980529785156,
0.11768531799316406,
0.0015315208584070206,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.035286903381347656,
-0.02651214599609375,
0.002460808260366... | [
-0.03296661376953125,
0.8901100158691406,
-0.010990142822265625,
0.5384597778320312,
0.23077011108398438,
0.0549468994140625,
-0.02976403944194317,
0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.23077011108398438,
0.010990142822265625,
-0.000880... | [
-0.9901199340820312,
0.2840089797973633,
0.7795448303222656,
-1.0664148330688477,
0.053215980529785156,
0.11768531799316406,
0.0015315208584070206,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.035286903381347656,
-0.02651214599609375,
0.002460808260366... | 0.2 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.2 | 20 | 0 | 20 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 20 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2866792678833008,
0.7795448303222656,
-1.0637445449829102,
0.056267738342285156,
0.11806678771972656,
0.0013358660507947206,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.033379554748535156,
-0.02651214599609375,
0.002460808260366... | [
-0.010990142822265625,
1.1098899841308594,
-0.010990142822265625,
0.34066009521484375,
0.6043968200683594,
0.010990142822265625,
-0.026593884453177452,
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.2967033386230469,
-0.010990142822265625,
0.0... | [
-0.9901199340820312,
0.2866792678833008,
0.7795448303222656,
-1.0637445449829102,
0.056267738342285156,
0.11806678771972656,
0.0013358660507947206,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.033379554748535156,
-0.02651214599609375,
0.002460808260366... | 0.21 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.21 | 21 | 0 | 21 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 21 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2893495559692383,
0.7795448303222656,
-1.0606927871704102,
0.062371253967285156,
0.11806678771972656,
0.0011830227449536324,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.031853675842285156,
-0.02651214599609375,
0.002473035827279... | [
-0.03296661376953125,
1.131866455078125,
-0.010990142822265625,
0.4285697937011719,
1.0879135131835938,
-0.03296661376953125,
-0.02236703224480152,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.20878982543945312,
-0.010990142822265625,
0.0012... | [
-0.9901199340820312,
0.2893495559692383,
0.7795448303222656,
-1.0606927871704102,
0.062371253967285156,
0.11806678771972656,
0.0011830227449536324,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.031853675842285156,
-0.02651214599609375,
0.002473035827279... | 0.22 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.22 | 22 | 0 | 22 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 22 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2924013137817383,
0.7795448303222656,
-1.0576410293579102,
0.07343387603759766,
0.11959266662597656,
0.0010424068896099925,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.031853675842285156,
-0.02651214599609375,
0.0024669221602380... | [
-0.010990142822265625,
1.373626708984375,
-0.03296661376953125,
0.3626365661621094,
1.7252731323242188,
0.34066009521484375,
-0.020605849102139473,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.20878982543945312,
-0.03296661376953125,
-0.00158... | [
-0.9901199340820312,
0.2924013137817383,
0.7795448303222656,
-1.0576410293579102,
0.07343387603759766,
0.11959266662597656,
0.0010424068896099925,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.031853675842285156,
-0.02651214599609375,
0.0024669221602380... | 0.23 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.23 | 23 | 0 | 23 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 23 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.2958345413208008,
0.7795448303222656,
-1.0557336807250977,
0.08449649810791016,
0.12493324279785156,
0.0009629283449612558,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.03070831298828125,
-0.02651214599609375,
0.00246080826036632... | [
-0.010990142822265625,
1.5494499206542969,
-0.010990142822265625,
0.27472686767578125,
1.5054931640625,
0.9780235290527344,
-0.00792535487562418,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.16483688354492188,
-0.03296661376953125,
-0.000176... | [
-0.9901199340820312,
0.2958345413208008,
0.7795448303222656,
-1.0557336807250977,
0.08449649810791016,
0.12493324279785156,
0.0009629283449612558,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.03070831298828125,
-0.02651214599609375,
0.00246080826036632... | 0.24 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.24 | 24 | 0 | 24 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 24 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3053712844848633,
0.7791633605957031,
-1.0503931045532227,
0.12378883361816406,
0.13714027404785156,
0.0010362931061536074,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02803802490234375,
-0.02651214599609375,
0.00247303582727909... | [
-0.010990142822265625,
2.296703338623047,
-0.03296661376953125,
0.3186798095703125,
1.9450531005859375,
0.7582435607910156,
0.01215220708400011,
0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.120880126953125,
0.010990142822265625,
0.0008806221... | [
-0.9901199340820312,
0.3053712844848633,
0.7791633605957031,
-1.0503931045532227,
0.12378883361816406,
0.13714027404785156,
0.0010362931061536074,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02803802490234375,
-0.02651214599609375,
0.00247303582727909... | 0.25 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.25 | 25 | 0 | 25 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 25 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3110933303833008,
0.7791633605957031,
-1.0488672256469727,
0.13675880432128906,
0.14248085021972656,
0.0011279991595074534,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02384185791015625,
-0.02651214599609375,
0.00246080826036632... | [
-0.010990142822265625,
2.5384597778320312,
-0.010990142822265625,
0.20878982543945312,
1.8351631164550781,
0.8021965026855469,
0.014970088377594948,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.03296661376953125,
-0.25274658203125,
0.010990142822265625,
-0.0005283... | [
-0.9901199340820312,
0.3110933303833008,
0.7791633605957031,
-1.0488672256469727,
0.13675880432128906,
0.14248085021972656,
0.0011279991595074534,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02384185791015625,
-0.02651214599609375,
0.00246080826036632... | 0.26 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.26 | 26 | 0 | 26 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 26 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3175783157348633,
0.7791633605957031,
-1.0461969375610352,
0.13675880432128906,
0.14782142639160156,
0.0012502737808972597,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02155303955078125,
-0.02651214599609375,
0.00246692216023802... | [
-0.010990142822265625,
2.956043243408203,
-0.03296661376953125,
0.3626365661621094,
1.8351631164550781,
0.8021965026855469,
0.019901365041732788,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.40659332275390625,
0.010990142822265625,
0.000176... | [
-0.9901199340820312,
0.3175783157348633,
0.7791633605957031,
-1.0461969375610352,
0.13675880432128906,
0.14782142639160156,
0.0012502737808972597,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02155303955078125,
-0.02651214599609375,
0.00246692216023802... | 0.27 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.27 | 27 | 0 | 27 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 27 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3252077102661133,
0.7791633605957031,
-1.0435266494750977,
0.14782142639160156,
0.15430641174316406,
0.0014581407885998487,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02002716064453125,
-0.02651214599609375,
0.00246692216023802... | [
-0.03296661376953125,
3.329669952392578,
-0.010990142822265625,
0.3626365661621094,
1.6593399047851562,
1,
0.03399088978767395,
-0.03296661376953125,
-0.010990142822265625,
-0.03296661376953125,
0.010990142822265625,
-0.23077011108398438,
-0.03296661376953125,
-0.0012328344164416194
] | [
-0.9901199340820312,
0.3252077102661133,
0.7791633605957031,
-1.0435266494750977,
0.14782142639160156,
0.15430641174316406,
0.0014581407885998487,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.02002716064453125,
-0.02651214599609375,
0.00246692216023802... | 0.28 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.28 | 28 | 0 | 28 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 28 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3332185745239258,
0.7791633605957031,
-1.0420007705688477,
0.15964794158935547,
0.16002941131591797,
0.0017393877496942878,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01811981201171875,
-0.02651214599609375,
0.00246080826036632... | [
-0.03296661376953125,
3.6373634338378906,
-0.010990142822265625,
0.1868133544921875,
1.7032966613769531,
0.7582435607910156,
0.045262474566698074,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
0.010990142822265625,
-0.3186798095703125,
0.010990142822265625,
-0.0001761... | [
-0.9901199340820312,
0.3332185745239258,
0.7791633605957031,
-1.0420007705688477,
0.15964794158935547,
0.16002941131591797,
0.0017393877496942878,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01811981201171875,
-0.02651214599609375,
0.00246080826036632... | 0.29 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.29 | 29 | 0 | 29 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 29 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3419923782348633,
0.7795448303222656,
-1.0389490127563477,
0.17872142791748047,
0.16422557830810547,
0.002118439180776477,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02613067626953125,
0.002460808260366320... | [
-0.010990142822265625,
3.923076629638672,
-0.010990142822265625,
0.4945068359375,
1.4835166931152344,
0.4945068359375,
0.05723854526877403,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.09889984130859375,
0.010990142822265625,
0.0008806221885... | [
-0.9901199340820312,
0.3419923782348633,
0.7795448303222656,
-1.0389490127563477,
0.17872142791748047,
0.16422557830810547,
0.002118439180776477,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02613067626953125,
0.002460808260366320... | 0.3 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.3 | 30 | 0 | 30 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 30 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3614482879638672,
0.7791633605957031,
-1.0332269668579102,
0.18825817108154297,
0.16994762420654297,
0.0030966519843786955,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02651214599609375,
0.00246080826036632... | [
0.010990142822265625,
4.428569793701172,
-0.010990142822265625,
0.3186798095703125,
1.2417564392089844,
0.40659332275390625,
0.08013392984867096,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.03296661376953125,
-0.09889984130859375,
-0.000880... | [
-0.9901199340820312,
0.3614482879638672,
0.7791633605957031,
-1.0332269668579102,
0.18825817108154297,
0.16994762420654297,
0.0030966519843786955,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02651214599609375,
0.00246080826036632... | 0.31 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.31 | 31 | 0 | 31 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 31 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3721294403076172,
0.7791633605957031,
-1.0301742553710938,
0.20427989959716797,
0.17299938201904297,
0.0036896993406116962,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02651214599609375,
0.00246692216023802... | [
-0.010990142822265625,
4.846153259277344,
0.010990142822265625,
0.47252655029296875,
1.3516502380371094,
0.4505500793457031,
0.08999653905630112,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
0.010990142822265625,
-0.03296661376953125,
0.010990142822265625,
0.00052834... | [
-0.9901199340820312,
0.3721294403076172,
0.7791633605957031,
-1.0301742553710938,
0.20427989959716797,
0.17299938201904297,
0.0036896993406116962,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02651214599609375,
0.00246692216023802... | 0.32 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.32 | 32 | 0 | 32 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 32 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3839550018310547,
0.7791633605957031,
-1.0278854370117188,
0.21267223358154297,
0.17643260955810547,
0.004337755031883717,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02651214599609375,
0.002466922160238027... | [
-0.010990142822265625,
5.197803497314453,
-0.010990142822265625,
0.2967033386230469,
1.1098899841308594,
0.5384597778320312,
0.10056370496749878,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
-0.001232... | [
-0.9901199340820312,
0.3839550018310547,
0.7791633605957031,
-1.0278854370117188,
0.21267223358154297,
0.17643260955810547,
0.004337755031883717,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2037458419799805,
0.01697540283203125,
-0.02651214599609375,
0.002466922160238027... | 0.33 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.33 | 33 | 0 | 33 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 33 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.3961620330810547,
0.7791633605957031,
-1.0263595581054688,
0.21267223358154297,
0.18101024627685547,
0.005077532026916742,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01697540283203125,
-0.02651214599609375,
0.0024608082603663206... | [
-0.010990142822265625,
5.571430206298828,
-0.010990142822265625,
0.1868133544921875,
1.1098899841308594,
0.6043968200683594,
0.11218749731779099,
-0.03296661376953125,
0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
0.010990142822265625,
0.010990142822265625,
-0.00017613... | [
-0.9901199340820312,
0.3961620330810547,
0.7791633605957031,
-1.0263595581054688,
0.21267223358154297,
0.18101024627685547,
0.005077532026916742,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01697540283203125,
-0.02651214599609375,
0.0024608082603663206... | 0.34 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.34 | 34 | 0 | 34 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 34 | 0 | 259 | 0 | |
[
-0.9901199340820312,
0.4098958969116211,
0.7795448303222656,
-1.0244522094726562,
0.21915817260742188,
0.18444347381591797,
0.00590901542454958,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01697540283203125,
-0.02651214599609375,
0.0024669221602380276
... | [
-0.0549468994140625,
5.9450531005859375,
0.010990142822265625,
0.23077011108398438,
0.8901100158691406,
0.5384597778320312,
0.12557248771190643,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
0.000176... | [
-0.9901199340820312,
0.4098958969116211,
0.7795448303222656,
-1.0244522094726562,
0.21915817260742188,
0.18444347381591797,
0.00590901542454958,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01697540283203125,
-0.02651214599609375,
0.0024669221602380276
... | 0.35 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.35 | 35 | 0 | 35 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 35 | 0 | 259 | 0 | |
[
-0.9905014038085938,
0.4236288070678711,
0.7791633605957031,
-1.0236892700195312,
0.23289108276367188,
0.18749523162841797,
0.006813862826675177,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02651214599609375,
0.0024669221602380276... | [
-0.09889984130859375,
6.25274658203125,
-0.03296661376953125,
0.120880126953125,
1.0219764709472656,
0.3626365661621094,
0.1375485509634018,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
-0.0008806221... | [
-0.9905014038085938,
0.4236288070678711,
0.7791633605957031,
-1.0236892700195312,
0.23289108276367188,
0.18749523162841797,
0.006813862826675177,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02651214599609375,
0.0024669221602380276... | 0.36 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.36 | 36 | 0 | 36 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 36 | 0 | 259 | 0 | |
[
-0.9908828735351562,
0.4522390365600586,
0.7791633605957031,
-1.0217819213867188,
0.23975753784179688,
0.19245433807373047,
0.008813084103167057,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02651214599609375,
0.0024669221602380276... | [
-0.14285659790039062,
6.516483306884766,
-0.010990142822265625,
0.09889984130859375,
0.2967033386230469,
0.5604400634765625,
0.15868280827999115,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
0.010990142822265625,
-0.0549468994140625,
0.000528348... | [
-0.9908828735351562,
0.4522390365600586,
0.7791633605957031,
-1.0217819213867188,
0.23975753784179688,
0.19245433807373047,
0.008813084103167057,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02651214599609375,
0.0024669221602380276... | 0.37 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.37 | 37 | 0 | 37 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 37 | 0 | 259 | 0 | |
[
-0.9912643432617188,
0.4674978256225586,
0.7791633605957031,
-1.0206375122070312,
0.23975753784179688,
0.19665050506591797,
0.009925799444317818,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02651214599609375,
0.0024608082603663206... | [
-0.16483688354492188,
6.736263275146484,
-0.010990142822265625,
0.120880126953125,
0.2967033386230469,
0.7142868041992188,
0.16819320619106293,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.010990142822265625,
-0.010990142822265625,
-0.00088062... | [
-0.9912643432617188,
0.4674978256225586,
0.7791633605957031,
-1.0206375122070312,
0.23975753784179688,
0.19665050506591797,
0.009925799444317818,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02651214599609375,
0.0024608082603663206... | 0.38 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.38 | 38 | 0 | 38 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 38 | 0 | 259 | 0 | |
[
-0.9920272827148438,
0.4831390380859375,
0.7791633605957031,
-1.0198745727539062,
0.24090194702148438,
0.20160961151123047,
0.011111878789961338,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02689361572265625,
0.0024608082603663206... | [
-0.3626365661621094,
7.021976470947266,
-0.010990142822265625,
0.03296661376953125,
0.09889984130859375,
0.8461532592773438,
0.17735134065151215,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
0.03296661376953125,
0.03296661376953125,
-0.03296661376953125,
-0.000176136... | [
-0.9920272827148438,
0.4831390380859375,
0.7791633605957031,
-1.0198745727539062,
0.24090194702148438,
0.20160961151123047,
0.011111878789961338,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02689361572265625,
0.0024608082603663206... | 0.39 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.39 | 39 | 0 | 39 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 39 | 0 | 259 | 0 | |
[
-0.9931716918945312,
0.4991607666015625,
0.7791633605957031,
-1.0198745727539062,
0.24052047729492188,
0.20809459686279297,
0.01235298253595829,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02689361572265625,
0.0024669221602380276
... | [
-0.5164833068847656,
7.219779968261719,
-0.03296661376953125,
-0.010990142822265625,
-0.120880126953125,
0.9120864868164062,
0.1861572563648224,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
0.000880... | [
-0.9931716918945312,
0.4991607666015625,
0.7791633605957031,
-1.0198745727539062,
0.24052047729492188,
0.20809459686279297,
0.01235298253595829,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01735687255859375,
-0.02689361572265625,
0.0024669221602380276
... | 0.4 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.4 | 40 | 0 | 40 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 40 | 0 | 259 | 0 | |
[
-0.9946975708007812,
0.51556396484375,
0.7791633605957031,
-1.0198745727539062,
0.24013900756835938,
0.21381664276123047,
0.013612441718578339,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01773834228515625,
-0.02689361572265625,
0.0024608082603663206
] | [
-0.6483497619628906,
7.241756439208984,
0.010990142822265625,
-0.03296661376953125,
-0.09889984130859375,
0.7362632751464844,
0.19249756634235382,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.0549468994140625,
-0.0549468994140625,
-0.00052834... | [
-0.9946975708007812,
0.51556396484375,
0.7791633605957031,
-1.0198745727539062,
0.24013900756835938,
0.21381664276123047,
0.013612441718578339,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01773834228515625,
-0.02689361572265625,
0.0024608082603663206
] | 0.41 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.41 | 41 | 0 | 41 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 41 | 0 | 259 | 0 | |
[
-0.9981307983398438,
0.5483713150024414,
0.7791633605957031,
-1.0206375122070312,
0.23746871948242188,
0.22488021850585938,
0.016308628022670746,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01811981201171875,
-0.02765655517578125,
0.0024669221602380276... | [
-0.8241767883300781,
7.4395599365234375,
-0.010990142822265625,
-0.0549468994140625,
-0.25274658203125,
0.9780235290527344,
0.20693925023078918,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.120880126953125,
0.0008806221... | [
-0.9981307983398438,
0.5483713150024414,
0.7791633605957031,
-1.0206375122070312,
0.23746871948242188,
0.22488021850585938,
0.016308628022670746,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01811981201171875,
-0.02765655517578125,
0.0024669221602380276... | 0.42 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.42 | 42 | 0 | 42 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 42 | 0 | 259 | 0 | |
[
-1.0000381469726562,
0.5655374526977539,
0.7791633605957031,
-1.0206375122070312,
0.23746871948242188,
0.23250961303710938,
0.017727045342326164,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01811981201171875,
-0.02765655517578125,
0.0024669221602380276... | [
-0.9560432434082031,
7.615383148193359,
0.010990142822265625,
-0.09889984130859375,
-0.25274658203125,
1.1098899841308594,
0.2125750631093979,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.0549468994140625,
0.03296661376953125,
-0.07692337036132812,
-0.000528348842... | [
-1.0000381469726562,
0.5655374526977539,
0.7791633605957031,
-1.0206375122070312,
0.23746871948242188,
0.23250961303710938,
0.017727045342326164,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.203364372253418,
0.01811981201171875,
-0.02765655517578125,
0.0024669221602380276... | 0.43 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.43 | 43 | 0 | 43 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 43 | 0 | 259 | 0 | |
[
-1.0027084350585938,
0.5827035903930664,
0.7791633605957031,
-1.0206375122070312,
0.23556137084960938,
0.23937606811523438,
0.019212698563933372,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.02880096435546875,
0.002466922160238027... | [
-1.1538467407226562,
7.725273132324219,
-0.010990142822265625,
-0.03296661376953125,
-0.07692337036132812,
1.0219764709472656,
0.21891531348228455,
0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
0.03296661376953125,
-0.14285659790039062,
0.0005283... | [
-1.0027084350585938,
0.5827035903930664,
0.7791633605957031,
-1.0206375122070312,
0.23556137084960938,
0.23937606811523438,
0.019212698563933372,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.02880096435546875,
0.002466922160238027... | 0.44 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.44 | 44 | 0 | 44 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 44 | 0 | 259 | 0 | |
[
-1.0057601928710938,
0.5998706817626953,
0.7791633605957031,
-1.0202560424804688,
0.23556137084960938,
0.24471664428710938,
0.020680025219917297,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.03108978271484375,
0.002473035827279091... | [
-1.3296699523925781,
7.703296661376953,
-0.010990142822265625,
0.03296661376953125,
-0.07692337036132812,
0.7802200317382812,
0.22349438071250916,
-0.010990142822265625,
0.010990142822265625,
-0.03296661376953125,
-0.03296661376953125,
-0.010990142822265625,
-0.3626365661621094,
0.00052834... | [
-1.0057601928710938,
0.5998706817626953,
0.7791633605957031,
-1.0202560424804688,
0.23556137084960938,
0.24471664428710938,
0.020680025219917297,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.03108978271484375,
0.002473035827279091... | 0.45 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.45 | 45 | 0 | 45 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 45 | 0 | 259 | 0 | |
[
-1.0088119506835938,
0.6170368194580078,
0.7791633605957031,
-1.0198745727539062,
0.23250961303710938,
0.2504386901855469,
0.022214587777853012,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.032998085021972656,
0.002466922160238027... | [
-1.4615402221679688,
7.659339904785156,
-0.03296661376953125,
0.09889984130859375,
-0.3186798095703125,
0.8021965026855469,
0.2273690104484558,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.34066009521484375,
-0.001232... | [
-1.0088119506835938,
0.6170368194580078,
0.7791633605957031,
-1.0198745727539062,
0.23250961303710938,
0.2504386901855469,
0.022214587777853012,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.032998085021972656,
0.002466922160238027... | 0.46 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.46 | 46 | 0 | 46 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 46 | 0 | 259 | 0 | |
[
-1.0164413452148438,
0.6517505645751953,
0.7791633605957031,
-1.0149154663085938,
0.23098373413085938,
0.2653160095214844,
0.02527761273086071,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.035286903381347656,
0.0024669221602380276... | [
-1.7032966613769531,
7.725273132324219,
-0.03296661376953125,
0.40659332275390625,
-0.0549468994140625,
1.0879135131835938,
0.22807350754737854,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.0549468994140625,
-0.2967033386230469,
-0.000176136... | [
-1.0164413452148438,
0.6517505645751953,
0.7791633605957031,
-1.0149154663085938,
0.23098373413085938,
0.2653160095214844,
0.02527761273086071,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.035286903381347656,
0.0024669221602380276... | 0.47 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.47 | 47 | 0 | 47 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 47 | 0 | 259 | 0 | |
[
-1.0202560424804688,
0.6689176559448242,
0.7791633605957031,
-1.0122451782226562,
0.23136520385742188,
0.2721824645996094,
0.026775509119033813,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.039864540100097656,
0.002466922160238027... | [
-1.8351631164550781,
7.725273132324219,
-0.010990142822265625,
0.4945068359375,
-0.010990142822265625,
1,
0.22842571139335632,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.3846168518066406,
-0.0015850465279072523
] | [
-1.0202560424804688,
0.6689176559448242,
0.7791633605957031,
-1.0122451782226562,
0.23136520385742188,
0.2721824645996094,
0.026775509119033813,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.039864540100097656,
0.002466922160238027... | 0.48 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.48 | 48 | 0 | 48 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 48 | 0 | 259 | 0 | |
[
-1.0248336791992188,
0.6860837936401367,
0.7791633605957031,
-1.0080490112304688,
0.23136520385742188,
0.2790489196777344,
0.028310071676969528,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01735687255859375,
-0.042534828186035156,
0.002460808260366320... | [
-2.076923370361328,
7.659339904785156,
0.010990142822265625,
0.626373291015625,
-0.010990142822265625,
1.0659332275390625,
0.2273690104484558,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.3626365661621094,
-0.000528348... | [
-1.0248336791992188,
0.6860837936401367,
0.7791633605957031,
-1.0080490112304688,
0.23136520385742188,
0.2790489196777344,
0.028310071676969528,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01735687255859375,
-0.042534828186035156,
0.002460808260366320... | 0.49 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.49 | 49 | 0 | 49 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 49 | 0 | 259 | 0 | |
[
-1.0301742553710938,
0.7032499313354492,
0.7791633605957031,
-1.0042343139648438,
0.23136520385742188,
0.2855348587036133,
0.029801853001117706,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.044060707092285156,
0.002466922160238027... | [
-2.25274658203125,
7.637363433837891,
-0.010990142822265625,
0.5824165344238281,
-0.010990142822265625,
0.868133544921875,
0.22032427787780762,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.03296661376953125,
-0.27472686767578125,
0.000176136... | [
-1.0301742553710938,
0.7032499313354492,
0.7791633605957031,
-1.0042343139648438,
0.23136520385742188,
0.2855348587036133,
0.029801853001117706,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.044060707092285156,
0.002466922160238027... | 0.5 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.5 | 50 | 0 | 50 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 50 | 0 | 259 | 0 | |
[
-1.0351343154907227,
0.7200355529785156,
0.7791633605957031,
-1.0000381469726562,
0.23250961303710938,
0.2893495559692383,
0.03126304969191551,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.046349525451660156,
0.0024608082603663206... | [
-2.3626365661621094,
7.549449920654297,
-0.010990142822265625,
0.6703300476074219,
0.010990142822265625,
0.4285697937011719,
0.21187058091163635,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
0.010990142822265625,
0.010990142822265625,
-0.27472686767578125,
-0.0008806... | [
-1.0351343154907227,
0.7200355529785156,
0.7791633605957031,
-1.0000381469726562,
0.23250961303710938,
0.2893495559692383,
0.03126304969191551,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.046349525451660156,
0.0024608082603663206... | 0.51 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.51 | 51 | 0 | 51 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 51 | 0 | 259 | 0 | |
[
-1.0412378311157227,
0.7368202209472656,
0.7791633605957031,
-0.9958419799804688,
0.23212814331054688,
0.2904939651489258,
0.03261421620845795,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.048638343811035156,
0.0024608082603663206... | [
-2.6043968200683594,
7.417583465576172,
-0.010990142822265625,
0.47252655029296875,
-0.010990142822265625,
0.03296661376953125,
0.20130348205566406,
-0.010990142822265625,
0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
0.010990142822265625,
-0.34066009521484375,
-0.0005... | [
-1.0412378311157227,
0.7368202209472656,
0.7791633605957031,
-0.9958419799804688,
0.23212814331054688,
0.2904939651489258,
0.03261421620845795,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.048638343811035156,
0.0024608082603663206... | 0.52 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.52 | 52 | 0 | 52 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 52 | 0 | 259 | 0 | |
[
-1.0473413467407227,
0.7524604797363281,
0.7791633605957031,
-0.9912643432617188,
0.23212814331054688,
0.2901124954223633,
0.033898115158081055,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.050927162170410156,
0.002460808260366320... | [
-2.868133544921875,
7.153846740722656,
0.010990142822265625,
0.8461532592773438,
-0.010990142822265625,
-0.09889984130859375,
0.18791843950748444,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.0549468994140625,
-0.25274658203125,
-0.000176136... | [
-1.0473413467407227,
0.7524604797363281,
0.7791633605957031,
-0.9912643432617188,
0.23212814331054688,
0.2901124954223633,
0.033898115158081055,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01773834228515625,
-0.050927162170410156,
0.002460808260366320... | 0.53 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.53 | 53 | 0 | 53 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 53 | 0 | 259 | 0 | |
[
-1.0610742568969727,
0.7829790115356445,
0.7791633605957031,
-0.9805831909179688,
0.23212814331054688,
0.2893495559692383,
0.036196909844875336,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.053978919982910156,
0.002460808260366320... | [
-3.131866455078125,
6.6923065185546875,
-0.010990142822265625,
0.9340667724609375,
-0.010990142822265625,
-0.03296661376953125,
0.1618529111146927,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.14285659790039062,
-0.0001... | [
-1.0610742568969727,
0.7829790115356445,
0.7791633605957031,
-0.9805831909179688,
0.23212814331054688,
0.2893495559692383,
0.036196909844875336,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01811981201171875,
-0.053978919982910156,
0.002460808260366320... | 0.54 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.54 | 54 | 0 | 54 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 54 | 0 | 259 | 0 | |
[
-1.0683221817016602,
0.7982378005981445,
0.7791633605957031,
-0.9744796752929688,
0.23250961303710938,
0.2882051467895508,
0.037217918783426285,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01850128173828125,
-0.055123329162597656,
0.002460808260366320... | [
-3.3516502380371094,
6.824176788330078,
-0.010990142822265625,
0.8901100158691406,
0.010990142822265625,
-0.23077011108398438,
0.1467067450284958,
0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
0.0549468994140625,
-0.1868133544921875,
0.0001761366... | [
-1.0683221817016602,
0.7982378005981445,
0.7791633605957031,
-0.9744796752929688,
0.23250961303710938,
0.2882051467895508,
0.037217918783426285,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01850128173828125,
-0.055123329162597656,
0.002460808260366320... | 0.55 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.55 | 55 | 0 | 55 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 55 | 0 | 259 | 0 | |
[
-1.0763330459594727,
0.8134965896606445,
0.7791633605957031,
-0.9683752059936523,
0.23212814331054688,
0.2859163284301758,
0.03812887892127037,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01888275146484375,
-0.056649208068847656,
0.0024608082603663206... | [
-3.5274734497070312,
6.956043243408203,
-0.010990142822265625,
0.8901100158691406,
-0.09889984130859375,
-0.3846168518066406,
0.13226500153541565,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.03296661376953125,
-0.25274658203125,
-0.000528348... | [
-1.0763330459594727,
0.8134965896606445,
0.7791633605957031,
-0.9683752059936523,
0.23212814331054688,
0.2859163284301758,
0.03812887892127037,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01888275146484375,
-0.056649208068847656,
0.0024608082603663206... | 0.56 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.56 | 56 | 0 | 56 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 56 | 0 | 259 | 0 | |
[
-1.0843439102172852,
0.829136848449707,
0.7791633605957031,
-0.9611272811889648,
0.23212814331054688,
0.2824831008911133,
0.03893590718507767,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01888275146484375,
-0.058175086975097656,
0.0024608082603663206
... | [
-3.6813201904296875,
6.846153259277344,
-0.03296661376953125,
1.0219764709472656,
0.03296661376953125,
-0.5164833068847656,
0.11570986360311508,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.010990142822265625,
-0.03296661376953125,
-0.120880126953125,
0.00017613665... | [
-1.0843439102172852,
0.829136848449707,
0.7791633605957031,
-0.9611272811889648,
0.23212814331054688,
0.2824831008911133,
0.03893590718507767,
1.1247806549072266,
0.2737083435058594,
0.9061946868896484,
-1.2029829025268555,
0.01888275146484375,
-0.058175086975097656,
0.0024608082603663206
... | 0.57 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.57 | 57 | 0 | 57 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 57 | 0 | 259 | 0 | |
[
-1.101511001586914,
0.8581295013427734,
0.7791633605957031,
-0.9477758407592773,
0.23174667358398438,
0.2790489196777344,
0.040189240127801895,
1.1247806549072266,
0.2737083435058594,
0.9058132171630859,
-1.202601432800293,
0.01964569091796875,
-0.058556556701660156,
0.0024608082603663206
... | [
-3.8131866455078125,
6.362636566162109,
-0.03296661376953125,
0.9780235290527344,
-0.0549468994140625,
-0.120880126953125,
0.08013392984867096,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
0.07692337036132812,
-0.07692337036132812,
-0.000176136... | [
-1.101511001586914,
0.8581295013427734,
0.7791633605957031,
-0.9477758407592773,
0.23174667358398438,
0.2790489196777344,
0.040189240127801895,
1.1247806549072266,
0.2737083435058594,
0.9058132171630859,
-1.202601432800293,
0.01964569091796875,
-0.058556556701660156,
0.0024608082603663206
... | 0.58 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.58 | 58 | 0 | 58 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 58 | 0 | 259 | 0 | |
[
-1.1102848052978516,
0.8718624114990234,
0.7791633605957031,
-0.9405279159545898,
0.23174667358398438,
0.2782859802246094,
0.0406416691839695,
1.1247806549072266,
0.2737083435058594,
0.9058132171630859,
-1.2022199630737305,
0.01964569091796875,
-0.059319496154785156,
0.0024608082603663206
... | [
-3.923076629638672,
6.164836883544922,
-0.03296661376953125,
1.0439567565917969,
-0.0549468994140625,
-0.1868133544921875,
0.06287430971860886,
-0.010990142822265625,
-0.010990142822265625,
-0.120880126953125,
0.010990142822265625,
0.0549468994140625,
-0.0549468994140625,
0.000176136658410... | [
-1.1102848052978516,
0.8718624114990234,
0.7791633605957031,
-0.9405279159545898,
0.23174667358398438,
0.2782859802246094,
0.0406416691839695,
1.1247806549072266,
0.2737083435058594,
0.9058132171630859,
-1.2022199630737305,
0.01964569091796875,
-0.059319496154785156,
0.0024608082603663206
... | 0.59 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.59 | 59 | 0 | 59 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 59 | 0 | 259 | 0 | |
[
-1.119058609008789,
0.8855953216552734,
0.7791633605957031,
-0.9328985214233398,
0.23174667358398438,
0.2767601013183594,
0.04097181186079979,
1.1247806549072266,
0.2737083435058594,
0.9054317474365234,
-1.201838493347168,
0.02155303955078125,
-0.059700965881347656,
0.0024608082603663206
] | [
-4.032966613769531,
6.098899841308594,
-0.03296661376953125,
1.0879135131835938,
-0.0549468994140625,
-0.20878982543945312,
0.04596696048974991,
-0.010990142822265625,
-0.03296661376953125,
-0.14285659790039062,
0.09889984130859375,
0.25274658203125,
-0.0549468994140625,
-0.001232834416441... | [
-1.119058609008789,
0.8855953216552734,
0.7791633605957031,
-0.9328985214233398,
0.23174667358398438,
0.2767601013183594,
0.04097181186079979,
1.1247806549072266,
0.2737083435058594,
0.9054317474365234,
-1.201838493347168,
0.02155303955078125,
-0.059700965881347656,
0.0024608082603663206
] | 0.6 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.6 | 60 | 0 | 60 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 60 | 0 | 259 | 0 | |
[
-1.128213882446289,
0.8993282318115234,
0.7791633605957031,
-0.9252691268920898,
0.23098373413085938,
0.2748527526855469,
0.04119190573692322,
1.1247806549072266,
0.2737083435058594,
0.9050502777099609,
-1.201075553894043,
0.02155303955078125,
-0.060082435607910156,
0.0024608082603663206
] | [
-4.076923370361328,
6.098899841308594,
-0.03296661376953125,
1.1538467407226562,
-0.0549468994140625,
-0.3846168518066406,
0.027650583535432816,
-0.03296661376953125,
-0.010990142822265625,
-0.1868133544921875,
0.120880126953125,
0.25274658203125,
-0.07692337036132812,
-0.00017613665841054... | [
-1.128213882446289,
0.8993282318115234,
0.7791633605957031,
-0.9252691268920898,
0.23098373413085938,
0.2748527526855469,
0.04119190573692322,
1.1247806549072266,
0.2737083435058594,
0.9050502777099609,
-1.201075553894043,
0.02155303955078125,
-0.060082435607910156,
0.0024608082603663206
] | 0.61 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.61 | 61 | 0 | 61 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 61 | 0 | 259 | 0 | |
[
-1.137369155883789,
0.9122991561889648,
0.7791633605957031,
-0.9168767929077148,
0.23098373413085938,
0.2714195251464844,
0.04130195453763008,
1.1247806549072266,
0.2737083435058594,
0.9042873382568359,
-1.1999311447143555,
0.02307891845703125,
-0.060082435607910156,
0.0024669221602380276
... | [
-4.164836883544922,
5.9450531005859375,
-0.0549468994140625,
1.2637367248535156,
-0.0549468994140625,
-0.5164833068847656,
0.014265602454543114,
-0.010990142822265625,
-0.010990142822265625,
-0.3186798095703125,
0.1868133544921875,
0.23077011108398438,
-0.010990142822265625,
0.000176136658... | [
-1.137369155883789,
0.9122991561889648,
0.7791633605957031,
-0.9168767929077148,
0.23098373413085938,
0.2714195251464844,
0.04130195453763008,
1.1247806549072266,
0.2737083435058594,
0.9042873382568359,
-1.1999311447143555,
0.02307891845703125,
-0.060082435607910156,
0.0024669221602380276
... | 0.62 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.62 | 62 | 0 | 62 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 62 | 0 | 259 | 0 | |
[
-1.1469058990478516,
0.9252691268920898,
0.7787818908691406,
-0.9073400497436523,
0.23060226440429688,
0.2679862976074219,
0.04131418094038963,
1.1247806549072266,
0.2737083435058594,
0.9039058685302734,
-1.1984052658081055,
0.02422332763671875,
-0.060082435607910156,
0.0024608082603663206... | [
-4.230770111083984,
5.791210174560547,
-0.07692337036132812,
1.4395599365234375,
-0.14285659790039062,
-0.6043968200683594,
-0.0019373198738321662,
-0.03296661376953125,
-0.010990142822265625,
-0.27472686767578125,
0.20878982543945312,
0.16483688354492188,
-0.010990142822265625,
-0.0005283... | [
-1.1469058990478516,
0.9252691268920898,
0.7787818908691406,
-0.9073400497436523,
0.23060226440429688,
0.2679862976074219,
0.04131418094038963,
1.1247806549072266,
0.2737083435058594,
0.9039058685302734,
-1.1984052658081055,
0.02422332763671875,
-0.060082435607910156,
0.0024608082603663206... | 0.63 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.63 | 63 | 0 | 63 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 63 | 0 | 259 | 0 | |
[
-1.156825065612793,
0.9378576278686523,
0.7787818908691406,
-0.8989467620849609,
0.22945785522460938,
0.2630271911621094,
0.04127749800682068,
1.1247806549072266,
0.2737083435058594,
0.9031429290771484,
-1.196497917175293,
0.02689361572265625,
-0.060082435607910156,
0.0024608082603663206
] | [
-4.340660095214844,
5.593406677246094,
-0.03296661376953125,
1.2637367248535156,
-0.23077011108398438,
-0.6923065185546875,
-0.005107413046061993,
-0.010990142822265625,
-0.010990142822265625,
-0.3626365661621094,
0.2967033386230469,
0.4285697937011719,
-0.03296661376953125,
0.000176136658... | [
-1.156825065612793,
0.9378576278686523,
0.7787818908691406,
-0.8989467620849609,
0.22945785522460938,
0.2630271911621094,
0.04127749800682068,
1.1247806549072266,
0.2737083435058594,
0.9031429290771484,
-1.196497917175293,
0.02689361572265625,
-0.060082435607910156,
0.0024608082603663206
] | 0.64 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.64 | 64 | 0 | 64 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 64 | 0 | 259 | 0 | |
[
-1.1770429611206055,
0.9626531600952148,
0.7787818908691406,
-0.8821620941162109,
0.22449874877929688,
0.2531089782714844,
0.04122858867049217,
1.1247806549072266,
0.2737083435058594,
0.9019985198974609,
-1.1945905685424805,
0.032616615295410156,
-0.060082435607910156,
0.002460808260366320... | [
-4.538459777832031,
5.4395599365234375,
0.010990142822265625,
1.1758232116699219,
-0.47252655029296875,
-0.6483497619628906,
-0.005107413046061993,
-0.010990142822265625,
-0.010990142822265625,
-0.3846168518066406,
0.27472686767578125,
0.4505500793457031,
-0.010990142822265625,
0.000176136... | [
-1.1770429611206055,
0.9626531600952148,
0.7787818908691406,
-0.8821620941162109,
0.22449874877929688,
0.2531089782714844,
0.04122858867049217,
1.1247806549072266,
0.2737083435058594,
0.9019985198974609,
-1.1945905685424805,
0.032616615295410156,
-0.060082435607910156,
0.002460808260366320... | 0.65 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.65 | 65 | 0 | 65 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 65 | 0 | 259 | 0 | |
[
-1.1869611740112305,
0.9740982055664062,
0.7787818908691406,
-0.8741512298583984,
0.22068405151367188,
0.24891281127929688,
0.04118579253554344,
1.1247806549072266,
0.2737083435058594,
0.9004726409912109,
-1.191157341003418,
0.039483070373535156,
-0.059700965881347656,
0.002460808260366320... | [
-4.5604400634765625,
5.241756439208984,
-0.010990142822265625,
1.1978034973144531,
-0.6923065185546875,
-0.626373291015625,
-0.00792535487562418,
-0.010990142822265625,
-0.010990142822265625,
-0.3626365661621094,
0.23077011108398438,
0.40659332275390625,
0.03296661376953125,
0.000176136658... | [
-1.1869611740112305,
0.9740982055664062,
0.7787818908691406,
-0.8741512298583984,
0.22068405151367188,
0.24891281127929688,
0.04118579253554344,
1.1247806549072266,
0.2737083435058594,
0.9004726409912109,
-1.191157341003418,
0.039483070373535156,
-0.059700965881347656,
0.002460808260366320... | 0.66 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.66 | 66 | 0 | 66 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 66 | 0 | 259 | 0 | |
[
-1.1976423263549805,
0.9855422973632812,
0.7787818908691406,
-0.8661403656005859,
0.20923900604248047,
0.24471664428710938,
0.041094087064266205,
1.1247806549072266,
0.2737083435058594,
0.8997097015380859,
-1.188868522644043,
0.042534828186035156,
-0.059700965881347656,
0.00246692216023802... | [
-4.670330047607422,
5.021976470947266,
-0.010990142822265625,
1.1098899841308594,
-0.9780235290527344,
-0.5604400634765625,
-0.01743575744330883,
-0.010990142822265625,
-0.010990142822265625,
-0.34066009521484375,
0.27472686767578125,
0.4945068359375,
0.0549468994140625,
0.0005283488426357... | [
-1.1976423263549805,
0.9855422973632812,
0.7787818908691406,
-0.8661403656005859,
0.20923900604248047,
0.24471664428710938,
0.041094087064266205,
1.1247806549072266,
0.2737083435058594,
0.8997097015380859,
-1.188868522644043,
0.042534828186035156,
-0.059700965881347656,
0.00246692216023802... | 0.67 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.67 | 67 | 0 | 67 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 67 | 0 | 259 | 0 | |
[
-1.2083234786987305,
0.9962234497070312,
0.7787818908691406,
-0.8592739105224609,
0.20923900604248047,
0.24128341674804688,
0.04095347225666046,
1.1247806549072266,
0.2737083435058594,
0.8985652923583984,
-1.1869611740112305,
0.042534828186035156,
-0.059319496154785156,
0.00246080826036632... | [
-4.824176788330078,
4.846153259277344,
-0.010990142822265625,
1,
-0.9780235290527344,
-0.47252655029296875,
-0.02236703224480152,
-0.010990142822265625,
-0.010990142822265625,
-0.4945068359375,
0.20878982543945312,
0.4945068359375,
0.0549468994140625,
-0.0012328344164416194
] | [
-1.2083234786987305,
0.9962234497070312,
0.7787818908691406,
-0.8592739105224609,
0.20923900604248047,
0.24128341674804688,
0.04095347225666046,
1.1247806549072266,
0.2737083435058594,
0.8985652923583984,
-1.1869611740112305,
0.042534828186035156,
-0.059319496154785156,
0.00246080826036632... | 0.68 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.68 | 68 | 0 | 68 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 68 | 0 | 259 | 0 | |
[
-1.2190055847167969,
1.0069046020507812,
0.7787818908691406,
-0.8524074554443359,
0.20313549041748047,
0.23708724975585938,
0.04077005758881569,
1.1247806549072266,
0.2737083435058594,
0.8981838226318359,
-1.1846723556518555,
0.045205116271972656,
-0.058556556701660156,
0.00246080826036632... | [
-4.802196502685547,
4.758243560791016,
-0.03296661376953125,
1.0439567565917969,
-0.868133544921875,
-0.6923065185546875,
-0.027650583535432816,
-0.010990142822265625,
-0.010990142822265625,
-0.2967033386230469,
0.3186798095703125,
0.40659332275390625,
0.09889984130859375,
0.00017613665841... | [
-1.2190055847167969,
1.0069046020507812,
0.7787818908691406,
-0.8524074554443359,
0.20313549041748047,
0.23708724975585938,
0.04077005758881569,
1.1247806549072266,
0.2737083435058594,
0.8981838226318359,
-1.1846723556518555,
0.045205116271972656,
-0.058556556701660156,
0.00246080826036632... | 0.69 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.69 | 69 | 0 | 69 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 69 | 0 | 259 | 0 | |
[
-1.2399864196777344,
1.0282669067382812,
0.7787818908691406,
-0.839818000793457,
0.18062877655029297,
0.23060226440429688,
0.04036653786897659,
1.1247806549072266,
0.2737083435058594,
0.8970394134521484,
-1.183527946472168,
0.045968055725097656,
-0.056649208068847656,
0.0024669221602380276... | [
-4.5604400634765625,
4.780220031738281,
-0.010990142822265625,
0.9780235290527344,
-1.2637367248535156,
-0.2967033386230469,
-0.03399088978767395,
-0.010990142822265625,
-0.010990142822265625,
-0.4945068359375,
0.1868133544921875,
0.03296661376953125,
0.3626365661621094,
0.0001761366584105... | [
-1.2399864196777344,
1.0282669067382812,
0.7787818908691406,
-0.839818000793457,
0.18062877655029297,
0.23060226440429688,
0.04036653786897659,
1.1247806549072266,
0.2737083435058594,
0.8970394134521484,
-1.183527946472168,
0.045968055725097656,
-0.056649208068847656,
0.0024669221602380276... | 0.7 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.7 | 70 | 0 | 70 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 70 | 0 | 259 | 0 | |
[
-1.2499046325683594,
1.0385675430297852,
0.7787818908691406,
-0.834477424621582,
0.17376232147216797,
0.22907638549804688,
0.04014033079147339,
1.1247806549072266,
0.2737083435058594,
0.8951320648193359,
-1.1793317794799805,
0.045968055725097656,
-0.052453041076660156,
0.002460808260366320... | [
-4.4945068359375,
4.648349761962891,
-0.010990142822265625,
0.7802200317382812,
-0.9560432434082031,
-0.20878982543945312,
-0.035752072930336,
-0.010990142822265625,
-0.010990142822265625,
-0.4505500793457031,
0.1868133544921875,
-0.010990142822265625,
0.2967033386230469,
0.000528348842635... | [
-1.2499046325683594,
1.0385675430297852,
0.7787818908691406,
-0.834477424621582,
0.17376232147216797,
0.22907638549804688,
0.04014033079147339,
1.1247806549072266,
0.2737083435058594,
0.8951320648193359,
-1.1793317794799805,
0.045968055725097656,
-0.052453041076660156,
0.002460808260366320... | 0.71 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.71 | 71 | 0 | 71 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 71 | 0 | 259 | 0 | |
[
-1.2598228454589844,
1.0488672256469727,
0.7787818908691406,
-0.8295183181762695,
0.16689586639404297,
0.22831344604492188,
0.03987743705511093,
1.1247806549072266,
0.2737083435058594,
0.8943691253662109,
-1.1770429611206055,
0.045968055725097656,
-0.050545692443847656,
0.00246692216023802... | [
-4.516483306884766,
4.516483306884766,
-0.010990142822265625,
0.6043968200683594,
-1.0439567565917969,
-0.09889984130859375,
-0.039274439215660095,
-0.010990142822265625,
-0.010990142822265625,
-0.2967033386230469,
0.3846168518066406,
-0.010990142822265625,
0.1868133544921875,
-0.000176136... | [
-1.2598228454589844,
1.0488672256469727,
0.7787818908691406,
-0.8295183181762695,
0.16689586639404297,
0.22831344604492188,
0.03987743705511093,
1.1247806549072266,
0.2737083435058594,
0.8943691253662109,
-1.1770429611206055,
0.045968055725097656,
-0.050545692443847656,
0.00246692216023802... | 0.72 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.72 | 72 | 0 | 72 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 72 | 0 | 259 | 0 | |
[
-1.2697410583496094,
1.0587854385375977,
0.7787818908691406,
-0.8249406814575195,
0.15926647186279297,
0.22869491577148438,
0.03960232064127922,
1.1247806549072266,
0.2737083435058594,
0.8936061859130859,
-1.1755170822143555,
0.045586585998535156,
-0.049019813537597656,
0.00246080826036632... | [
-4.406593322753906,
4.428569793701172,
-0.010990142822265625,
0.7142868041992188,
-1.1758232116699219,
0.010990142822265625,
-0.04279680922627449,
-0.010990142822265625,
-0.010990142822265625,
-0.4505500793457031,
0.25274658203125,
-0.03296661376953125,
0.23077011108398438,
-0.000528348842... | [
-1.2697410583496094,
1.0587854385375977,
0.7787818908691406,
-0.8249406814575195,
0.15926647186279297,
0.22869491577148438,
0.03960232064127922,
1.1247806549072266,
0.2737083435058594,
0.8936061859130859,
-1.1755170822143555,
0.045586585998535156,
-0.049019813537597656,
0.00246080826036632... | 0.73 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.73 | 73 | 0 | 73 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 73 | 0 | 259 | 0 | |
[
-1.2792778015136719,
1.0687036514282227,
0.7787818908691406,
-0.8203630447387695,
0.15278053283691406,
0.22869491577148438,
0.039314959198236465,
1.1247806549072266,
0.2737083435058594,
0.8924617767333984,
-1.172846794128418,
0.045586585998535156,
-0.047875404357910156,
0.00246080826036632... | [
-4.274726867675781,
4.406593322753906,
-0.010990142822265625,
0.6483497619628906,
-0.9560432434082031,
-0.03296661376953125,
-0.04279680922627449,
-0.010990142822265625,
-0.010990142822265625,
-0.47252655029296875,
0.4285697937011719,
0.010990142822265625,
0.03296661376953125,
0.0005283488... | [
-1.2792778015136719,
1.0687036514282227,
0.7787818908691406,
-0.8203630447387695,
0.15278053283691406,
0.22869491577148438,
0.039314959198236465,
1.1247806549072266,
0.2737083435058594,
0.8924617767333984,
-1.172846794128418,
0.045586585998535156,
-0.047875404357910156,
0.00246080826036632... | 0.74 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.74 | 74 | 0 | 74 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 74 | 0 | 259 | 0 | |
[
-1.2884340286254883,
1.0782403945922852,
0.7787818908691406,
-0.815403938293457,
0.15278053283691406,
0.22793197631835938,
0.03901538625359535,
1.1247806549072266,
0.2737083435058594,
0.8916988372802734,
-1.1709394454956055,
0.045586585998535156,
-0.047875404357910156,
0.002466922160238027... | [
-4.164836883544922,
4.384616851806641,
-0.010990142822265625,
0.7362632751464844,
-0.9560432434082031,
-0.120880126953125,
-0.04420577734708786,
-0.010990142822265625,
-0.010990142822265625,
-0.4505500793457031,
0.1868133544921875,
-0.03296661376953125,
0.010990142822265625,
-0.00123283441... | [
-1.2884340286254883,
1.0782403945922852,
0.7787818908691406,
-0.815403938293457,
0.15278053283691406,
0.22793197631835938,
0.03901538625359535,
1.1247806549072266,
0.2737083435058594,
0.8916988372802734,
-1.1709394454956055,
0.045586585998535156,
-0.047875404357910156,
0.002466922160238027... | 0.75 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.75 | 75 | 0 | 75 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 75 | 0 | 259 | 0 | |
[
-1.3067445755004883,
1.097696304321289,
0.7787818908691406,
-0.8066301345825195,
0.13942909240722656,
0.22755050659179688,
0.038428451865911484,
1.1247806549072266,
0.2737083435058594,
0.8894100189208984,
-1.166743278503418,
0.045205116271972656,
-0.048256874084472656,
0.002466922160238027... | [
-4.010990142822266,
4.274726867675781,
-0.010990142822265625,
0.6483497619628906,
-0.5604400634765625,
-0.120880126953125,
-0.043853506445884705,
-0.010990142822265625,
0.010990142822265625,
-0.5384597778320312,
0.3626365661621094,
-0.07692337036132812,
-0.010990142822265625,
0.00052834884... | [
-1.3067445755004883,
1.097696304321289,
0.7787818908691406,
-0.8066301345825195,
0.13942909240722656,
0.22755050659179688,
0.038428451865911484,
1.1247806549072266,
0.2737083435058594,
0.8894100189208984,
-1.166743278503418,
0.045205116271972656,
-0.048256874084472656,
0.002466922160238027... | 0.76 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.76 | 76 | 0 | 76 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 76 | 0 | 259 | 0 | |
[
-1.3151369094848633,
1.1072330474853516,
0.7787818908691406,
-0.8028154373168945,
0.13752174377441406,
0.22488021850585938,
0.03814110904932022,
1.1247806549072266,
0.2737083435058594,
0.8882656097412109,
-1.164454460144043,
0.045205116271972656,
-0.048256874084472656,
0.002460808260366320... | [
-3.879119873046875,
4.208789825439453,
-0.010990142822265625,
0.47252655029296875,
-0.40659332275390625,
-0.4945068359375,
-0.042444534599781036,
-0.010990142822265625,
-0.010990142822265625,
-0.5164833068847656,
0.25274658203125,
-0.07692337036132812,
-0.010990142822265625,
-0.00123283441... | [
-1.3151369094848633,
1.1072330474853516,
0.7787818908691406,
-0.8028154373168945,
0.13752174377441406,
0.22488021850585938,
0.03814110904932022,
1.1247806549072266,
0.2737083435058594,
0.8882656097412109,
-1.164454460144043,
0.045205116271972656,
-0.048256874084472656,
0.002460808260366320... | 0.77 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.77 | 77 | 0 | 77 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 77 | 0 | 259 | 0 | |
[
-1.3235292434692383,
1.116006851196289,
0.7787818908691406,
-0.7990007400512695,
0.13752174377441406,
0.22068405151367188,
0.037859875708818436,
1.1247806549072266,
0.2737083435058594,
0.8871212005615234,
-1.1625471115112305,
0.044823646545410156,
-0.048256874084472656,
0.00246080826036632... | [
-3.74725341796875,
3.9890098571777344,
-0.010990142822265625,
0.6483497619628906,
-0.40659332275390625,
-0.7362632751464844,
-0.04138783738017082,
-0.010990142822265625,
-0.010990142822265625,
-0.4505500793457031,
0.3626365661621094,
-0.010990142822265625,
-0.0549468994140625,
-0.000528348... | [
-1.3235292434692383,
1.116006851196289,
0.7787818908691406,
-0.7990007400512695,
0.13752174377441406,
0.22068405151367188,
0.037859875708818436,
1.1247806549072266,
0.2737083435058594,
0.8871212005615234,
-1.1625471115112305,
0.044823646545410156,
-0.048256874084472656,
0.00246080826036632... | 0.78 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.78 | 78 | 0 | 78 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 78 | 0 | 259 | 0 | |
[
-1.3319215774536133,
1.1247806549072266,
0.7787818908691406,
-0.795567512512207,
0.13256263732910156,
0.21534252166748047,
0.03760921210050583,
1.1247806549072266,
0.2737083435058594,
0.8863582611083984,
-1.161402702331543,
0.044823646545410156,
-0.048638343811035156,
0.0024608082603663206... | [
-3.703296661376953,
3.8571434020996094,
-0.010990142822265625,
0.47252655029296875,
-0.4505500793457031,
-0.8241767883300781,
-0.03716098517179489,
0.010990142822265625,
-0.010990142822265625,
-0.40659332275390625,
0.0549468994140625,
-0.010990142822265625,
-0.0549468994140625,
0.000176136... | [
-1.3319215774536133,
1.1247806549072266,
0.7787818908691406,
-0.795567512512207,
0.13256263732910156,
0.21534252166748047,
0.03760921210050583,
1.1247806549072266,
0.2737083435058594,
0.8863582611083984,
-1.161402702331543,
0.044823646545410156,
-0.048638343811035156,
0.0024608082603663206... | 0.79 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.79 | 79 | 0 | 79 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 79 | 0 | 259 | 0 | |
[
-1.3399324417114258,
1.1331729888916016,
0.7787818908691406,
-0.792515754699707,
0.12989234924316406,
0.20923900604248047,
0.03737076371908188,
1.1247806549072266,
0.2737083435058594,
0.8855953216552734,
-1.159876823425293,
0.044442176818847656,
-0.049019813537597656,
0.0024608082603663206... | [
-3.6373634338378906,
3.791210174560547,
-0.010990142822265625,
0.4285697937011719,
-0.5164833068847656,
-0.9560432434082031,
-0.03504759073257446,
-0.010990142822265625,
-0.010990142822265625,
-0.3846168518066406,
0.2967033386230469,
-0.09889984130859375,
0.0549468994140625,
-0.00052834884... | [
-1.3399324417114258,
1.1331729888916016,
0.7787818908691406,
-0.792515754699707,
0.12989234924316406,
0.20923900604248047,
0.03737076371908188,
1.1247806549072266,
0.2737083435058594,
0.8855953216552734,
-1.159876823425293,
0.044442176818847656,
-0.049019813537597656,
0.0024608082603663206... | 0.8 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.8 | 80 | 0 | 80 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 80 | 0 | 259 | 0 | |
[
-1.3551921844482422,
1.1499576568603516,
0.7787818908691406,
-0.785649299621582,
0.12760353088378906,
0.19779491424560547,
0.03694891557097435,
1.1247806549072266,
0.2737083435058594,
0.8852138519287109,
-1.1587324142456055,
0.044442176818847656,
-0.049019813537597656,
0.002454694593325257... | [
-3.3956031799316406,
3.703296661376953,
-0.010990142822265625,
0.27472686767578125,
-0.2967033386230469,
-0.6923065185546875,
-0.02976403944194317,
-0.010990142822265625,
-0.010990142822265625,
-0.20878982543945312,
0.09889984130859375,
-0.0549468994140625,
-0.03296661376953125,
-0.0001761... | [
-1.3551921844482422,
1.1499576568603516,
0.7787818908691406,
-0.785649299621582,
0.12760353088378906,
0.19779491424560547,
0.03694891557097435,
1.1247806549072266,
0.2737083435058594,
0.8852138519287109,
-1.1587324142456055,
0.044442176818847656,
-0.049019813537597656,
0.002454694593325257... | 0.81 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.81 | 81 | 0 | 81 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 81 | 0 | 259 | 0 | |
[
-1.3628215789794922,
1.158350944519043,
0.7787818908691406,
-0.7814531326293945,
0.12569618225097656,
0.19436168670654297,
0.03677161782979965,
1.1247806549072266,
0.2737083435058594,
0.8844509124755859,
-1.157588005065918,
0.044060707092285156,
-0.048638343811035156,
0.0024546945933252573... | [
-3.2857131958007812,
3.6593399047851562,
-0.03296661376953125,
0.626373291015625,
-0.3626365661621094,
-0.5824165344238281,
-0.026241673156619072,
-0.010990142822265625,
-0.010990142822265625,
-0.09889984130859375,
0.14285659790039062,
-0.09889984130859375,
0.09889984130859375,
-0.00088062... | [
-1.3628215789794922,
1.158350944519043,
0.7787818908691406,
-0.7814531326293945,
0.12569618225097656,
0.19436168670654297,
0.03677161782979965,
1.1247806549072266,
0.2737083435058594,
0.8844509124755859,
-1.157588005065918,
0.044060707092285156,
-0.048638343811035156,
0.0024546945933252573... | 0.82 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.82 | 82 | 0 | 82 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 82 | 0 | 259 | 0 | |
[
-1.3696880340576172,
1.1663618087768555,
0.7787818908691406,
-0.7791633605957031,
0.12455177307128906,
0.19092845916748047,
0.036606546491384506,
1.1247806549072266,
0.2737083435058594,
0.8840694427490234,
-1.1572065353393555,
0.044060707092285156,
-0.049019813537597656,
0.0024608082603663... | [
-3.175823211669922,
3.5274734497070312,
-0.010990142822265625,
0.27472686767578125,
-0.07692337036132812,
-0.5384597778320312,
-0.024480490013957024,
-0.010990142822265625,
-0.010990142822265625,
-0.16483688354492188,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.00... | [
-1.3696880340576172,
1.1663618087768555,
0.7787818908691406,
-0.7791633605957031,
0.12455177307128906,
0.19092845916748047,
0.036606546491384506,
1.1247806549072266,
0.2737083435058594,
0.8840694427490234,
-1.1572065353393555,
0.044060707092285156,
-0.049019813537597656,
0.0024608082603663... | 0.83 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.83 | 83 | 0 | 83 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 83 | 0 | 259 | 0 | |
[
-1.3765544891357422,
1.1739912033081055,
0.7787818908691406,
-0.7780189514160156,
0.12340736389160156,
0.18711376190185547,
0.03646591305732727,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044060707092285156,
-0.049019813537597656,
0.002460808260366320... | [
-3.0879135131835938,
3.4395599365234375,
0.010990142822265625,
0.16483688354492188,
-0.14285659790039062,
-0.5824165344238281,
-0.020958123728632927,
-0.010990142822265625,
-0.010990142822265625,
-0.16483688354492188,
0.07692337036132812,
-0.010990142822265625,
-0.010990142822265625,
0.000... | [
-1.3765544891357422,
1.1739912033081055,
0.7787818908691406,
-0.7780189514160156,
0.12340736389160156,
0.18711376190185547,
0.03646591305732727,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044060707092285156,
-0.049019813537597656,
0.002460808260366320... | 0.84 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.84 | 84 | 0 | 84 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 84 | 0 | 259 | 0 | |
[
-1.3830394744873047,
1.181239128112793,
0.7787818908691406,
-0.7761116027832031,
0.12302589416503906,
0.18329906463623047,
0.03633752465248108,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044060707092285156,
-0.049019813537597656,
0.0024608082603663206... | [
-2.9780235290527344,
3.329669952392578,
-0.010990142822265625,
0.16483688354492188,
-0.0549468994140625,
-0.626373291015625,
-0.020605849102139473,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.0012... | [
-1.3830394744873047,
1.181239128112793,
0.7787818908691406,
-0.7761116027832031,
0.12302589416503906,
0.18329906463623047,
0.03633752465248108,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044060707092285156,
-0.049019813537597656,
0.0024608082603663206... | 0.85 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.85 | 85 | 0 | 85 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 85 | 0 | 259 | 0 | |
[
-1.3895244598388672,
1.1884870529174805,
0.7787818908691406,
-0.7757301330566406,
0.12188148498535156,
0.18062877655029297,
0.03620302304625511,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049019813537597656,
0.00246080826036632... | [
-2.8901100158691406,
3.1538467407226562,
-0.010990142822265625,
0.07692337036132812,
-0.1868133544921875,
-0.3186798095703125,
-0.019901365041732788,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.03296661376953125,
-0.03296661376953125,
-0.0549468994140625,
0.00017... | [
-1.3895244598388672,
1.1884870529174805,
0.7787818908691406,
-0.7757301330566406,
0.12188148498535156,
0.18062877655029297,
0.03620302304625511,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049019813537597656,
0.00246080826036632... | 0.86 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.86 | 86 | 0 | 86 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 86 | 0 | 259 | 0 | |
[
-1.4013500213623047,
1.2022199630737305,
0.7787818908691406,
-0.7742042541503906,
0.11463356018066406,
0.17833995819091797,
0.03601961210370064,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044442176818847656,
-0.049019813537597656,
0.002460808260366320... | [
-2.5604400634765625,
3.043956756591797,
-0.010990142822265625,
0.14285659790039062,
-0.7802200317382812,
-0.03296661376953125,
-0.01215220708400011,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.010990142822265625,
-0.001... | [
-1.4013500213623047,
1.2022199630737305,
0.7787818908691406,
-0.7742042541503906,
0.11463356018066406,
0.17833995819091797,
0.03601961210370064,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044442176818847656,
-0.049019813537597656,
0.002460808260366320... | 0.87 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.87 | 87 | 0 | 87 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 87 | 0 | 259 | 0 | |
[
-1.4070730209350586,
1.2090864181518555,
0.7787818908691406,
-0.7726783752441406,
0.11463356018066406,
0.17833995819091797,
0.03594624623656273,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049019813537597656,
0.00246080826036632... | [
-2.450550079345703,
3.0659332275390625,
-0.010990142822265625,
0.14285659790039062,
-0.7802200317382812,
-0.010990142822265625,
-0.011799933388829231,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
0.010990142822265625,
-0.0549468994140625,
0.000... | [
-1.4070730209350586,
1.2090864181518555,
0.7787818908691406,
-0.7726783752441406,
0.11463356018066406,
0.17833995819091797,
0.03594624623656273,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049019813537597656,
0.00246080826036632... | 0.88 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.88 | 88 | 0 | 88 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 88 | 0 | 259 | 0 | |
[
-1.4124135971069336,
1.2159528732299805,
0.7787818908691406,
-0.7719154357910156,
0.09861183166503906,
0.17795848846435547,
0.035866767168045044,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044442176818847656,
-0.049401283264160156,
0.00246080826036632... | [
-2.4065933227539062,
2.9780235290527344,
-0.010990142822265625,
0.09889984130859375,
-1.3076934814453125,
-0.09889984130859375,
-0.01285663153976202,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.0549468994140625,
0.0005... | [
-1.4124135971069336,
1.2159528732299805,
0.7787818908691406,
-0.7719154357910156,
0.09861183166503906,
0.17795848846435547,
0.035866767168045044,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044442176818847656,
-0.049401283264160156,
0.00246080826036632... | 0.89 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.89 | 89 | 0 | 89 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 89 | 0 | 259 | 0 | |
[
-1.417372703552246,
1.2224388122558594,
0.7787818908691406,
-0.7715339660644531,
0.09136295318603516,
0.17681407928466797,
0.03578728809952736,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044442176818847656,
-0.049019813537597656,
0.0024608082603663206... | [
-2.3846168518066406,
2.956043243408203,
-0.03296661376953125,
0.03296661376953125,
-0.9780235290527344,
-0.23077011108398438,
-0.01215220708400011,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.03296661376953125,
0.0549468994140625,
-0.000880... | [
-1.417372703552246,
1.2224388122558594,
0.7787818908691406,
-0.7715339660644531,
0.09136295318603516,
0.17681407928466797,
0.03578728809952736,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.044442176818847656,
-0.049019813537597656,
0.0024608082603663206... | 0.9 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.9 | 90 | 0 | 90 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 90 | 0 | 259 | 0 | |
[
-1.422713279724121,
1.2289237976074219,
0.7787818908691406,
-0.7711524963378906,
0.09136295318603516,
0.17528820037841797,
0.03573226556181908,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049401283264160156,
0.002460808260366320... | [
-2.3846168518066406,
2.824176788330078,
-0.010990142822265625,
-0.03296661376953125,
-0.9780235290527344,
-0.1868133544921875,
-0.00792535487562418,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.0549468994140625,
-0.03296661376953125,
-0.0549468994140625,
0.000880... | [
-1.422713279724121,
1.2289237976074219,
0.7787818908691406,
-0.7711524963378906,
0.09136295318603516,
0.17528820037841797,
0.03573226556181908,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049401283264160156,
0.002460808260366320... | 0.91 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.91 | 91 | 0 | 91 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 91 | 0 | 259 | 0 | |
[
-1.4276723861694336,
1.2346458435058594,
0.7787818908691406,
-0.7715339660644531,
0.07419681549072266,
0.17452526092529297,
0.03568335622549057,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049401283264160156,
0.00246692216023802... | [
-2.1868133544921875,
2.6483497619628906,
-0.010990142822265625,
-0.07692337036132812,
-1.2637367248535156,
-0.16483688354492188,
-0.007573081646114588,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.03296661376953125,
-0.0549468994140625,
0.00... | [
-1.4276723861694336,
1.2346458435058594,
0.7787818908691406,
-0.7715339660644531,
0.07419681549072266,
0.17452526092529297,
0.03568335622549057,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049401283264160156,
0.00246692216023802... | 0.92 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.92 | 92 | 0 | 92 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 92 | 0 | 259 | 0 | |
[
-1.4322500228881836,
1.2407493591308594,
0.7787818908691406,
-0.7722969055175781,
0.06809329986572266,
0.17299938201904297,
0.03562833368778229,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049019813537597656,
0.00246080826036632... | [
-2.0549468994140625,
2.582416534423828,
-0.010990142822265625,
-0.16483688354492188,
-0.9340667724609375,
-0.25274658203125,
-0.009334265254437923,
-0.010990142822265625,
-0.03296661376953125,
-0.03296661376953125,
-0.010990142822265625,
-0.09889984130859375,
0.0549468994140625,
-0.0012328... | [
-1.4322500228881836,
1.2407493591308594,
0.7787818908691406,
-0.7722969055175781,
0.06809329986572266,
0.17299938201904297,
0.03562833368778229,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.044442176818847656,
-0.049019813537597656,
0.00246080826036632... | 0.93 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.93 | 93 | 0 | 93 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 93 | 0 | 259 | 0 | |
[
-1.441023826599121,
1.2514305114746094,
0.7787818908691406,
-0.7738227844238281,
0.051308631896972656,
0.16689586639404297,
0.03545713424682617,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043679237365722656,
-0.049401283264160156,
0.002466922160238027... | [
-1.9011001586914062,
2.3846168518066406,
-0.03296661376953125,
-0.120880126953125,
-1.4395599365234375,
-0.4945068359375,
-0.015322300605475903,
-0.010990142822265625,
-0.010990142822265625,
-0.03296661376953125,
0.03296661376953125,
-0.0549468994140625,
-0.010990142822265625,
-0.000528348... | [
-1.441023826599121,
1.2514305114746094,
0.7787818908691406,
-0.7738227844238281,
0.051308631896972656,
0.16689586639404297,
0.03545713424682617,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043679237365722656,
-0.049401283264160156,
0.002466922160238027... | 0.94 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.94 | 94 | 0 | 94 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 94 | 0 | 259 | 0 | |
[
-1.4444570541381836,
1.2567710876464844,
0.7784004211425781,
-0.7742042541503906,
0.051308631896972656,
0.16384410858154297,
0.03534097224473953,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043297767639160156,
-0.049019813537597656,
0.00246080826036632... | [
-1.6593399047851562,
2.4725265502929688,
-0.03296661376953125,
-0.03296661376953125,
-1.4395599365234375,
-0.5604400634765625,
-0.01778796873986721,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.03296661376953125,
-0.03296661376953125,
0.07692337036132812,
-0.00158... | [
-1.4444570541381836,
1.2567710876464844,
0.7784004211425781,
-0.7742042541503906,
0.051308631896972656,
0.16384410858154297,
0.03534097224473953,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043297767639160156,
-0.049019813537597656,
0.00246080826036632... | 0.95 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.95 | 95 | 0 | 95 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 95 | 0 | 259 | 0 | |
[
-1.447890281677246,
1.2621116638183594,
0.7784004211425781,
-0.7742042541503906,
0.038338661193847656,
0.16002941131591797,
0.03522481024265289,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043297767639160156,
-0.049019813537597656,
0.002460808260366320... | [
-1.5494499206542969,
2.2747268676757812,
-0.03296661376953125,
-0.0549468994140625,
-0.9120864868164062,
-0.6043968200683594,
-0.018844665959477425,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
0.010990142822265625,
-0.07692337036132812,
-0.0549468994140625,
0.00017... | [
-1.447890281677246,
1.2621116638183594,
0.7784004211425781,
-0.7742042541503906,
0.038338661193847656,
0.16002941131591797,
0.03522481024265289,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043297767639160156,
-0.049019813537597656,
0.002460808260366320... | 0.96 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.96 | 96 | 0 | 96 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 96 | 0 | 259 | 0 | |
[
-1.4513235092163086,
1.2666893005371094,
0.7784004211425781,
-0.7745857238769531,
0.031472206115722656,
0.15583229064941406,
0.035078082233667374,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043297767639160156,
-0.049019813537597656,
0.0024608082603663... | [
-1.3516502380371094,
2.120880126953125,
-0.010990142822265625,
-0.0549468994140625,
-1.0659332275390625,
-0.626373291015625,
-0.02412821725010872,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.07692337036132812,
0.010990142822265625,
-0.00088... | [
-1.4513235092163086,
1.2666893005371094,
0.7784004211425781,
-0.7745857238769531,
0.031472206115722656,
0.15583229064941406,
0.035078082233667374,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.156825065612793,
0.043297767639160156,
-0.049019813537597656,
0.0024608082603663... | 0.97 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.97 | 97 | 0 | 97 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 97 | 0 | 259 | 0 | |
[
-1.453993797302246,
1.2716484069824219,
0.7784004211425781,
-0.7749671936035156,
0.031472206115722656,
0.15316200256347656,
0.03488244116306305,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.041390419006347656,
-0.048638343811035156,
0.00245469459332525... | [
-1.2197799682617188,
2.0988998413085938,
-0.010990142822265625,
-0.0549468994140625,
-1.0659332275390625,
-0.3626365661621094,
-0.02976403944194317,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.010990142822265625,
-0.16483688354492188,
0.0549468994140625,
-0.0015... | [
-1.453993797302246,
1.2716484069824219,
0.7784004211425781,
-0.7749671936035156,
0.031472206115722656,
0.15316200256347656,
0.03488244116306305,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.041390419006347656,
-0.048638343811035156,
0.00245469459332525... | 0.98 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.98 | 98 | 0 | 98 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 98 | 0 | 259 | 0 | |
[
-1.4581899642944336,
1.2796592712402344,
0.7784004211425781,
-0.7749671936035156,
0.02193450927734375,
0.15049171447753906,
0.03438721224665642,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.040627479553222656,
-0.048638343811035156,
0.00245469459332525... | [
-0.9780235290527344,
1.7032966613769531,
-0.010990142822265625,
-0.0549468994140625,
-0.4285697937011719,
-0.16483688354492188,
-0.042092323303222656,
-0.010990142822265625,
-0.03296661376953125,
-0.010990142822265625,
-0.010990142822265625,
-0.09889984130859375,
-0.03296661376953125,
0.00... | [
-1.4581899642944336,
1.2796592712402344,
0.7784004211425781,
-0.7749671936035156,
0.02193450927734375,
0.15049171447753906,
0.03438721224665642,
1.1247806549072266,
0.2737083435058594,
0.8836879730224609,
-1.1572065353393555,
0.040627479553222656,
-0.048638343811035156,
0.00245469459332525... | 0.99 | false | 0 | false | 2 | true | 2 | true | ["video_left", "video_overhead", "video_right"] | can0 | can1 | 0 | true | 4222d44ad08581bc2503f65fbc6ccbcff6c1f483b2d11372b42effad52c9d297 | {"1": "reject", "3": "accept_and_capture_labeling_snapshot"} | true | false | 0.25 | 0 | 100 | true | true | false | {"1": "failure", "2": "complete_subgoal_next_or_stop"} | 4 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | true | arx | 0 | false | [
[
25.6994571685791,
20.78782081604004
],
[
12.106270790100098,
26.216392517089844
],
[
25.639667510986328,
2.918304920196533
]
] | 3 | [
[
1,
0
],
[
0.9659258127212524,
0.258819043636322
],
[
-0.25881901383399963,
0.9659258127212524
]
] | 3 | [
0,
0.2617993950843811,
1.832595705986023
] | 3 | ["place router 1", "route rope through router 1", "place router 2", "route rope through router 2"] | [
0,
259,
477,
698
] | 4 | 1 | 1 | false | false | closed | true | true | 3 | calibration/start_position.npz | 3 | route | rope_route_two_routers | true | place the connector on the selected vector | 0.99 | 99 | 0 | 99 | 0 | 0 | [
85.57499694824219,
93.44999694824219
] | [
0.9950371980667114,
0.09950366616249084
] | 0.099669 | true | 1 | 14 | 2 | 4 | 2.4 | place router 1 | place the connector on the selected vector | 2 | 99 | 0 | 259 | 0 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.