File size: 2,282 Bytes
d22e320
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
59a7a28
d22e320
59a7a28
d22e320
 
 
 
 
 
 
 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
Open-front picking bin 200 x 145 x 130 mm
PB3

A small open-front picking bin, the shelf-mounted parts bin found on pick faces,
workshop racking and line-side supply trolleys everywhere. The front wall stands
at roughly 40% of the back wall's height with the side walls sweeping down between
them on a curve, so an operator can reach in and pick without lifting the bin off
the shelf.

The body is tapered, which lets empty bins nest into one another for storage and
transport, and the base sits on an inset plinth so a loaded bin stacks squarely on
the one below instead of sliding. A rolled lip runs around the front opening.

Unlike the euro container family, open-front picking bins are not governed by a
dimensional standard - sizes are manufacturer-specific. This is the small member
of a typical stocked small/medium/large range, and the same moulding is available
as PB1 (450 x 300 x 210 mm) and PB2 (295 x 205 x 160 mm).

DIMENSIONS (external)
  Depth     200 mm
  Width     145 mm
  Height    130 mm

STANDARD
  No dimensional standard governs this family; sizes are manufacturer-specific. These three are typical of the commonly stocked small/medium/large range.

TYPICAL USE
Built as a set-dressing and layout asset for warehouses, stockrooms, workshops,
maintenance stores and factory scenes: pick-face and shelf fills, small-parts
storage walls, WMS and inventory-system bin visualisation, facility and
architectural walkthroughs, training and simulation environments, and product
configurators.

Modelled at true real-world scale with clean low-poly topology and a single flat
base colour, so a wall of several hundred bins stays cheap to render and can be
recoloured per bin class without touching the mesh.

ASSET NOTES
  Format      GLB (glTF 2.0 binary), single file, no external textures
  Scale       metres, real world - a 600 mm crate is 0.600 units long
  Origin      centre of the base, +Z up
  Geometry    1,488 triangles, 2,100 vertices
  Materials   flat PBR base colours, no image maps
  File size   77.4 KB

LICENCE
  CC Attribution 4.0 (CC BY 4.0)

TAGS
  picking bin, parts bin, shelf bin, storage bin, open front bin, louvre bin,
warehouse, workshop, stockroom, small parts, industrial, plastic bin, inventory,
supply chain, lowpoly, pbr, gltf, glb