Datasets:
File size: 1,879 Bytes
d22e320 | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 | Boltless shelving bay 1600 x 600 x 2300 mm SB1 A boltless (rivet) steel shelving bay of the kind used throughout warehouses, stockrooms, archives and workshops: four corner posts, front and back beams at each level, shelf decks, and diagonal bracing on the side frames. Five levels. The bay is dimensioned around the euro container module, which is what makes it useful as a layout asset rather than generic racking: the 600 mm depth matches the long side of a 600 x 400 mm euro container exactly, and the 1600 mm width takes four 400 mm-wide containers per level - twenty per bay across five levels. Drop the euro containers from this same set onto it and the fit is correct by construction, not by eye. Shelf pitch is a representative spacing rather than a manufacturer's figure. DIMENSIONS (external) Width 1600 mm Depth 600 mm Height 2300 mm TYPICAL USE Built as a set-dressing and layout asset for warehouse, stockroom, archive, workshop and factory scenes: aisle and rack runs, storage capacity planning, WMS and inventory-system location visualisation, facility and architectural walkthroughs, training and simulation environments. Modelled at true real-world scale with clean low-poly topology and a single flat material, so a full aisle of bays stays cheap to render and instances without rescaling. ASSET NOTES Format GLB (glTF 2.0 binary), single file, no external textures Scale metres, real world - a 600 mm crate is 0.600 units long Origin centre of the base, +Z up Geometry 924 triangles, 1,008 vertices Materials flat PBR base colours, no image maps File size 30.2 KB LICENCE CC Attribution 4.0 (CC BY 4.0) TAGS shelving, racking, boltless shelving, rivet shelving, steel shelf, warehouse rack, storage rack, warehouse, stockroom, archive, industrial, logistics, inventory, lowpoly, pbr, gltf, glb |