question string | answer string | source_file string | module_name string | tool_name string | tool_parameters list | tool_result string | category string | subcategory string | difficulty string | question_hash string | stage1_target string | stage2_context string | plan_id string | design_id string | split string | writer_model string | n_calls int64 | ctx_cap int64 | source dict |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For the module ct_idu_id_decd_special, how does the structure shown in its DFG relate to the delay optimization advice, and what trade-offs should I expect if I follow it? | The DFG for ct_idu_id_decd_special has 154 nodes and 2212 edges with an average degree of 14.36, dominated by 67 $eq, 56 $logic_or, and 11 $logic_and nodes, which is consistent with the delay-focused advice to duplicate logic to reduce fanout and insert pipelining. Following the delay optimization is estimated to impro... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/idu/rtl/ct_idu_id_decd_special.v | ct_idu_id_decd_special | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[66778 chars elided]...
"node_count": 154,
"edge_count": 2212,
"graph_properties": {
"node_types": {
"$logic_and": 11,
"$eq": 67,
"$logic_or": 56,
"$reduce_or": 2,
"$logic_not": 5,
"$... | multi_tool | graph_extractor+optimization_advisor | compositional | 0c9cba87842c | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the module ct_idu_id_decd_special, how does the structure shown in its DFG relate to the delay optimization advice, and what trade-offs should I expect if I follow it?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[66778 chars elided]...
"node_count": 154,
... | 7caf03c5e6d6 | 3672e3e536a9 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/idu/rtl/ct_idu_id_decd_special.v",
"sha256": "27f371a2fa49d25c1a69355ba58e9b4059ad37d560b9fddf7ebb00c85c575cb8"
} |
For the module ct_mmu_arb, how well does the synthesized netlist preserve the RTL signals, and how does the complexity of the CDFG relate to the post-synthesis delay and area results from the delay-and-area-focused synthesis run? | The RTL-to-netlist mapping is fully preserved: all 68 RTL signals were mapped (alignment score 100.0, 0 unmapped). The CDFG extracted for ct_mmu_arb has 187 nodes and 2508 edges with an average degree of 13.41, and after synthesis at medium optimization this logic becomes 825 gates with area 835.5 and delay 324.45. | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/mmu/rtl/ct_mmu_arb.v | ct_mmu_arb | cross_stage_mapper+graph_extractor+synthesis_tool | [
{},
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"tlboper_arb_idx_not_va": [
"tlboper_arb_idx_not_va"
],
"tlboper_xx_cmplt": [
"tlboper_xx_cmplt"
],
"jtlb_arb_cmp_va": [
"jtlb_arb_cmp_va"
],
"arb_jtlb_data_din": [
"arb_jtlb_data
...[3345 ... | multi_tool | cross_stage_mapper+graph_extractor+synthesis_tool | compositional | 187e07c7c00e | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the module ct_mmu_arb, how well does the synthesized netlist preserve the RTL signals, and how does the complexity of the CDFG relate to the post-synthesis delay and area results from the delay-and-area-focused synthesis run?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
... | 62a40332ef18 | 36b8180b5e67 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/mmu/rtl/ct_mmu_arb.v",
"sha256": "20df29580c68baa1086605e6397997f3c3e556062dcb06e0f22c852c19d4471b"
} |
For the arbiter module, how does the control/data-flow structure compare with the area-focused optimization opportunity? Specifically, given its CDFG composition and the estimated area improvement, what trade-off should I keep in mind? | The arbiter's CDFG has 7 nodes and 288 edges, consisting of one $and, one $not, one $sub, and one $or plus 2 inputs and 1 output, with an average degree of 41.14. Running the area optimization recipes (including 'share -aggressive') is estimated to improve area by -15.0 and power by -10.0, but delay would worsen by 5.0... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arbitration/arbiter.v | arbiter | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[21831 chars elided]...
"node_count": 7,
"edge_count": 288,
"graph_properties": {
"node_types": {
"$and": 1,
"$not": 1,
"$sub": 1,
"$or": 1,
"port_input": 2,
"port_output": 1
},... | multi_tool | graph_extractor+optimization_advisor | compositional | aabd0761bd90 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the arbiter module, how does the control/data-flow structure compare with the area-focused optimization opportunity? Specifically, given its CDFG composition and the estimated area improvement, what trade-off should I keep in mind?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"grap... | f9ba689d3a05 | 36ca94b8c37f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arbitration/arbiter.v",
"sha256": "2ea1fd375cbc0ff56014e0cf41a2b81a644d4293c5bf0499bb44d394af9980a8"
} |
For the i2c_master module, summarize how its code complexity relates to the synthesis results and the structure of its control/data-flow graph: given its 628 lines of code and cyclomatic complexity of 88, what area, delay, power, and DFG characteristics did synthesis and graph analysis report, and are there any lint is... | Despite a fairly large design of 628 lines of code, 892 operators, and cyclomatic complexity 88 with no lint warnings, i2c_master synthesizes to 885 gates (area 1086.0), a delay of 384.26, and power of 0.885, with the cell mix dominated by combinational logic such as 226 AND gates, 213 NAND gates, and 102 NOR gates plu... | github_repos/corundum_corundum/fpga/lib/eth/example/DE5-Net/fpga/rtl/i2c_master.v | i2c_master | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "i2c_master",
"port_count": {
"inputs": 19,
"outputs": 14,
"inouts": 0,
"total": 33
},
"signal_count": {
"wires": 36,
"regs": 34,
"parameters": 0,
"total": 70
},
"always_blocks": 3,
"assign_... | multi_tool | static_analyzer+synthesis_tool | compositional | a78cd064be31 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the i2c_master module, summarize how its code complexity relates to the synthesis results and the structure of its control/data-flow graph: given its 628 lines of code and cyclomatic complexity of 88, what area, delay, power, and DFG characteristics did synthesis and graph analysis report, and are there a... | 2b5e2c96376b | 3754fb81cf6d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/DE5-Net/fpga/rtl/i2c_master.v",
"sha256": "ff46775d79e00853c9008f668ae9dfb71ad2cb93d6fec783aa08e527f207efb4"
} |
For ct_fadd_onehot_sel_h, how does the size of the AIG representation of the module compare to the final synthesized gate-level netlist, and what are the resulting area, delay, and power figures after synthesis? | The AIG for ct_fadd_onehot_sel_h has 2460 nodes and 5837 edges (with 923 AND nodes, 1534 NOT nodes, and 3 port nodes), which reduces to a much smaller netlist of 192 gates (92 NAND, 82 AND, 12 ANDNOT, and 6 NOR cells) after synthesis. The synthesized design achieves an area of 198.0, a delay and critical path estimate ... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fadd_onehot_sel_h.v | ct_fadd_onehot_sel_h | graph_extractor+synthesis_tool | [
{
"graph_type": "AIG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33337 chars elided]...
"node_count": 2460,
"edge_count": 5837,
"graph_properties": {
"node_types": {
"$_AND_": 923,
"$_NOT_": 1534,
"port_input": 2,
"port_output": 1
},
"avg_degree": 2.3... | multi_tool | graph_extractor+synthesis_tool | compositional | ebb0b5a4ea4a | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For ct_fadd_onehot_sel_h, how does the size of the AIG representation of the module compare to the final synthesized gate-level netlist, and what are the resulting area, delay, and power figures after synthesis?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33337... | 7e4d696c41d4 | 371797df2c55 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fadd_onehot_sel_h.v",
"sha256": "26520dea3730a66417df754393c895f5f5781dec87f260c3e6d4021dbad592e4"
} |
For the module ct_biu_snoop_channel, is it worth applying the suggested delay optimization given how complex the design already is, and what impact would it have? | The ct_biu_snoop_channel module is already quite complex, with a cyclomatic complexity of 95 across 452 lines of code, 21 always blocks, and 1512 operators, so the delay optimization offering an estimated -20.0 delay improvement comes at a cost. It would increase area by 10.0 and power by 5.0, and involves suggestions ... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/biu/rtl/ct_biu_snoop_channel.v | ct_biu_snoop_channel | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top ct_biu_snoop_channel",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
... | multi_tool | optimization_advisor+static_analyzer | compositional | eb18b6b5712a | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module ct_biu_snoop_channel, is it worth applying the suggested delay optimization given how complex the design already is, and what impact would it have?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top ... | 763c367e520f | 379e45693b42 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/biu/rtl/ct_biu_snoop_channel.v",
"sha256": "7b6710fcb797477de6bc9f0883b4d59290696f762d84765611ade3bf6dbc124b"
} |
For system_top, the delay-focused optimization advice estimates trade-offs — how would applying those recipes affect the current synthesized figures, and is it worth it? | The current synthesis of system_top reports a delay of 247.39, an area of 149.5, power of 0.105, and 105 gates, while the delay-oriented optimization is estimated to reduce delay by 20.0 at the cost of about 10.0 more area and 5.0 more power. If that timing margin matters, techniques like pipelining the arithmetic oper... | github_repos/analogdevicesinc_hdl/projects/ad9081_fmca_ebz_x_band/zcu102/system_top.v | system_top | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top system_top",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"des... | multi_tool | optimization_advisor+synthesis_tool | compositional | 78a24d78fadb | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For system_top, the delay-focused optimization advice estimates trade-offs — how would applying those recipes affect the current synthesized figures, and is it worth it?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synt... | 22d571e81b57 | 37ac71f31737 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/ad9081_fmca_ebz_x_band/zcu102/system_top.v",
"sha256": "8fff2a6bcfd717b5721aaeddac0eff2da0863e13ccd845c6fb055cbc50a78ae8"
} |
For axi_vfifo_raw_rd, is it worth applying the power optimization flow, considering its current synthesized results and code complexity? Please summarize the area, delay, power, gate count, cyclomatic complexity, and the expected power improvement. | axi_vfifo_raw_rd currently synthesizes to an area of 1797.0, delay of 489.99, power of 1.099, and 1099 gates, and with a cyclomatic complexity of 47 the power optimization flow (clock gating and operand isolation) is expected to reduce power by 25.0 at the cost of possibly 5.0 area and delay overhead. Given the module'... | github_repos/corundum_corundum/fpga/lib/axi/rtl/axi_vfifo_raw_rd.v | axi_vfifo_raw_rd | optimization_advisor+static_analyzer+synthesis_tool | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top axi_vfifo_raw_rd",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "clock... | multi_tool | optimization_advisor+static_analyzer+synthesis_tool | compositional | 91fc9fa2bf0f | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For axi_vfifo_raw_rd, is it worth applying the power optimization flow, considering its current synthesized results and code complexity? Please summarize the area, delay, power, gate count, cyclomatic complexity, and the expected power improvement.
[optimization_advisor {"target_metric": "power"}]
{
"statu... | 97bcdefdf959 | 37d6755ff153 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/axi/rtl/axi_vfifo_raw_rd.v",
"sha256": "3173828129ebb045f8127d5658469f7aef1bae58c065f8b3b3fffb86684901a5"
} |
For the BUFR module, how well did the RTL signals carry over to the netlist, and does the AIG graph structure suggest why some signals could not be mapped? | In BUFR, only 3 of the 5 RTL signals mapped to netlist wires (alignment score 60.0), leaving 'clock' and 'input' unmapped while I, O and CLR were preserved. The AIG shows a single clock_divider node with module_not_derived set, feeding 3 input ports and 1 output port across 5 nodes and 7 edges with average degree 1.4, ... | github_repos/aolofsson_oh/xilibs/dv/BUFR.v | BUFR | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "AIG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"I": [
"I"
],
"clock": [],
"O": [
"O"
],
"input": [],
"CLR": [
"CLR"
]
},
"alignment_score": 60.0,
"unmapped_elements": [
"clock",
"input"
],
"mapping_statistics": {
"rt... | multi_tool | cross_stage_mapper+graph_extractor | compositional | c75a575097d5 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}] | Question: For the BUFR module, how well did the RTL signals carry over to the netlist, and does the AIG graph structure suggest why some signals could not be mapped?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"I": [
"I"
],
"clock": [],
"O": [
"O"
],
... | 3cb1468b1ddf | 3893557105c5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "xilibs/dv/BUFR.v",
"sha256": "868efda87889722c239b4fb4fb0a72cc2a7944bddf0900e48934a8d94fa2d8c1"
} |
For sum_of_64, how well does the RTL-to-netlist signal mapping hold up given the scale of the AIG representation, and what power-oriented optimization could be applied — and what gains and trade-offs would it bring? | The RTL-to-netlist mapping is perfect with an alignment score of 100.0 and all 4 RTL signals (sum_f, sum, sum_a, data) mapped with 0 unmapped signals, even though the AIG representation of sum_of_64 contains 648 nodes and 1662 edges including 273 $_AND_ gates and 366 $_NOT_ gates. A power-targeted optimization using cl... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/sum_of_64.v | sum_of_64 | cross_stage_mapper+graph_extractor+optimization_advisor | [
{},
{
"graph_type": "AIG"
},
{
"target_metric": "power"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"sum_f": [
"sum_f"
],
"sum": [
"sum_d",
"sum_h",
"sum_c",
"sum",
"sum_e"
],
"sum_a": [
"sum_a"
],
"data": [
"data"
]
},
"alignment_score": 100.0,
"unmapped... | multi_tool | cross_stage_mapper+graph_extractor+optimization_advisor | compositional | acb7effbac08 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For sum_of_64, how well does the RTL-to-netlist signal mapping hold up given the scale of the AIG representation, and what power-oriented optimization could be applied — and what gains and trade-offs would it bring?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"sum_f": [... | 203ba116c269 | 38c3c53066b5 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arithmetic/sum_of_64.v",
"sha256": "ee591b00dd1f9ac25753b1f5797fc12abf9ee4b8e55d733b6f778957c04689a6"
} |
For ct_rtu_encode_96, given its complexity metrics and the area-optimization recommendations, is aggressive resource sharing a reasonable choice, and what are the expected trade-offs in area, delay, and power? | ct_rtu_encode_96 has 341 operators across 117 lines of code with no always blocks and just 1 assign statement, so sharing arithmetic operators is plausible for such an operator-heavy description. The estimated effect is -15.0 in area, -10.0 in power, and 5.0 in delay, meaning the area and power savings come at the cost... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_encode_96.v | ct_rtu_encode_96 | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top ct_rtu_encode_96 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{... | multi_tool | optimization_advisor+static_analyzer | compositional | 258d98bbc691 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For ct_rtu_encode_96, given its complexity metrics and the area-optimization recommendations, is aggressive resource sharing a reasonable choice, and what are the expected trade-offs in area, delay, and power?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area"... | 56c422780d7a | 38d1b10a5623 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_encode_96.v",
"sha256": "93b710e31372d1d51d2dd50092eab6baf5ac281fd88c9db585aca73ce40520d7"
} |
For ct_rtu_encode_96, how does the structure of the And-Inverter Graph (AIG) compare to the complexity reported by source-level analysis, and what does this suggest about the design? | The AIG for ct_rtu_encode_96 contains 2634 nodes and 5922 edges, with 658 AND nodes, 1974 NOT nodes, and 1 input plus 1 output port, while the source-level analysis shows a very small module with just 1 input port, 1 assign statement, 341 operators, and a cyclomatic complexity of 2 across 117 lines of code. The heavily... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_encode_96.v | ct_rtu_encode_96 | graph_extractor+static_analyzer | [
{
"graph_type": "AIG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33440 chars elided]...
"node_count": 2634,
"edge_count": 5922,
"graph_properties": {
"node_types": {
"$_AND_": 658,
"$_NOT_": 1974,
"port_output": 1,
"port_input": 1
},
"avg_degree": 2.2... | multi_tool | graph_extractor+static_analyzer | compositional | 42d284a80473 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For ct_rtu_encode_96, how does the structure of the And-Inverter Graph (AIG) compare to the complexity reported by source-level analysis, and what does this suggest about the design?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33440 chars elided]...
"node_cou... | 4e7117007222 | 38d1b10a5623 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_encode_96.v",
"sha256": "93b710e31372d1d51d2dd50092eab6baf5ac281fd88c9db585aca73ce40520d7"
} |
For ct_f_spsram_256x7, how does the code structure relate to the synthesized implementation — specifically, given that the RTL contains 1 always block, 22 assign statements, 1 reg, and no instantiations, what does synthesis produce in terms of gate count, delay, and power, and do any lint warnings suggest problems? | The RTL for ct_f_spsram_256x7 has 1 always block, 22 assign statements, and 1 reg with no lint warnings, and it synthesizes cleanly to 47 gates (16 $_NAND_, 8 $_DFF_P_, 8 $_ORNOT_, 7 $_ANDNOT_, 1 $_NOR_, 7 fpga_ram) with an area of 78.5, a critical-path delay of 211.39, and power of 0.047. Since no lint warnings were r... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_256x7.v | ct_f_spsram_256x7 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "ct_f_spsram_256x7",
"port_count": {
"inputs": 6,
"outputs": 1,
"inouts": 0,
"total": 7
},
"signal_count": {
"wires": 29,
"regs": 1,
"parameters": 1,
"total": 30
},
"always_blocks": 1,
"assi... | multi_tool | static_analyzer+synthesis_tool | compositional | ccedf7ca39bf | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For ct_f_spsram_256x7, how does the code structure relate to the synthesized implementation — specifically, given that the RTL contains 1 always block, 22 assign statements, 1 reg, and no instantiations, what does synthesis produce in terms of gate count, delay, and power, and do any lint warnings suggest pro... | d973287d4231 | 38e3b96494a5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_256x7.v",
"sha256": "3f0c24b5f57508e50ed5351aa57ba5de4003fad9c50d78e75b2a37c4b3845797"
} |
For the module sum_of_64, how well does the RTL structure correspond to the synthesized netlist, considering which signals were mapped and how the netlist size compares to the RTL given the submodules instantiated? | The RTL of sum_of_64 instantiates five submodules (any, License, twelve_four_comp, ternary_add, and six_three_comp), and all 4 RTL signals (sum_f, sum, sum_a, and data) map successfully to the netlist with an alignment score of 100.0 and no unmapped signals. However, the netlist is much larger, containing 233 wires ver... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/sum_of_64.v | sum_of_64 | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"sum_f": [
"sum_f"
],
"sum": [
"sum_d",
"sum_h",
"sum_c",
"sum",
"sum_e"
],
"sum_a": [
"sum_a"
],
"data": [
"data"
]
},
"alignment_score": 100.0,
"unmapped... | multi_tool | cross_stage_mapper+static_analyzer | compositional | d2b5ca8d0736 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module sum_of_64, how well does the RTL structure correspond to the synthesized netlist, considering which signals were mapped and how the netlist size compares to the RTL given the submodules instantiated?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"sum_f": [
... | 653edc70f033 | 38c3c53066b5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arithmetic/sum_of_64.v",
"sha256": "ee591b00dd1f9ac25753b1f5797fc12abf9ee4b8e55d733b6f778957c04689a6"
} |
For the module pcileech_top, the data-flow graph shows a certain number of nodes and edges, and the power-focused optimization analysis estimates a specific power reduction; using both, what does the DFG structure look like and what power improvement could the recommended clock-gating and operand-isolation steps delive... | The DFG for pcileech_top has 37 nodes and 1260 edges with an average degree of 34.05, including 9 input ports, 7 output ports, 2 inout ports, and 1 $dff, plus one instance each of pcileech_fifo, pcileech_ft601, fifo_256_32, fifo_32_32_deep, and pcileech_pcie. The power optimization suggests clock gating and operand iso... | github_repos/ufrisk_pcileech-fpga/sp605_ft601/pcileech_top.v | pcileech_top | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[28341 chars elided]...
"node_count": 37,
"edge_count": 1260,
"graph_properties": {
"node_types": {
"$and": 2,
"$not": 4,
"$mux": 1,
"$or": 2,
"$dff": 1,
"pcileech_fifo": 1,
"pc... | multi_tool | graph_extractor+optimization_advisor | compositional | 9d5ac9eb4d55 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For the module pcileech_top, the data-flow graph shows a certain number of nodes and edges, and the power-focused optimization analysis estimates a specific power reduction; using both, what does the DFG structure look like and what power improvement could the recommended clock-gating and operand-isolation st... | 8f86214e6ff2 | 39142e196c92 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/ufrisk/pcileech-fpga",
"commit": "c538c4170678c13f723dc921905fb81ff3c71d8e",
"path": "sp605_ft601/pcileech_top.v",
"sha256": "9f9f3b2b683ed966d54dabbf624c62a4402b46ddc196a8040cb2ce9326ad4d33"
} |
For the bin_to_asc_hex module, how do the structural statistics compare with the recommendations from the delay optimization analysis, and is pipelining a reasonable suggestion given the module's size? | The module bin_to_asc_hex is fairly small, with 61 lines of code, cyclomatic complexity 8, nesting depth 6, 345 operators, 2 wires declarations, 1 reg, and 1 always block, yet the delay-focused optimization still recommends pipelining arithmetic operations via register retiming, estimating a delay improvement of -20.0 ... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/debug/bin_to_asc_hex.v | bin_to_asc_hex | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top bin_to_asc_hex",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
... | multi_tool | optimization_advisor+static_analyzer | compositional | cf7764bf77c1 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the bin_to_asc_hex module, how do the structural statistics compare with the recommendations from the delay optimization analysis, and is pipelining a reasonable suggestion given the module's size?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"r... | 21aa81c932a3 | 391958776d2f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/debug/bin_to_asc_hex.v",
"sha256": "cca22eefdd72fd1c43ec48dc8759b0ad4bfcbeca2b40fcda45058b4f97019886"
} |
For axi_logic_analyzer, given the RTL-to-netlist mapping quality and the AIG extracted from the netlist, how well do the mapping results and the AIG size line up — is the low alignment score consistent with the graph's size and flip-flop content? | The mapping only aligned 62 of 88 RTL signals (26 unmapped, alignment score 70.45), which is consistent with the AIG being quite large and heavily optimized: it contains 19333 nodes and 48744 edges with average degree 2.52. The graph still preserves the state structure — 79 $_DFF_P_, 272 $_DFFE_PP_, and 338 $_SDFF_PP0_... | github_repos/analogdevicesinc_hdl/library/axi_logic_analyzer/axi_logic_analyzer.v | axi_logic_analyzer | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "AIG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"data_fixed_delay": [],
"up_wdata": [
"up_wdata"
],
"up_rstn": [
"up_rstn"
],
"wire": [],
"divider_counter_pg": [
"divider_counter_pg"
],
"overwrite_enable": [
"overwrite_enable"
... | multi_tool | cross_stage_mapper+graph_extractor | compositional | f76ac28e97d8 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}] | Question: For axi_logic_analyzer, given the RTL-to-netlist mapping quality and the AIG extracted from the netlist, how well do the mapping results and the AIG size line up — is the low alignment score consistent with the graph's size and flip-flop content?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_net... | cc1a80bb9ebd | 396913f69746 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_logic_analyzer/axi_logic_analyzer.v",
"sha256": "e3db2ba6b7d8e37184365cbdcea627c46b5af970e06aefcd6e26d86a2f02d7aa"
} |
For the module dut, is it worth applying the area-optimization recipes, considering the reported trade-offs and the module's structural characteristics? Summarize using the estimated improvements and the code statistics. | For dut, aggressive area optimization is expected to reduce area by -15.0 and power by -10.0 at the cost of a +5.0 delay increase. The module is structurally simple, with 0 always blocks, 4 assign statements, 6 total ports, and cyclomatic complexity of 2, so resource sharing (share -aggressive) can be applied with limi... | github_repos/aolofsson_oh/gpio/dv/dut_gpio.v | dut | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top dut -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"type"... | multi_tool | optimization_advisor+static_analyzer | compositional | e2b754254fd8 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module dut, is it worth applying the area-optimization recipes, considering the reported trade-offs and the module's structural characteristics? Summarize using the estimated improvements and the code statistics.
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metr... | 11d5412ca99c | 39aeb8ce05da | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "gpio/dv/dut_gpio.v",
"sha256": "dd65fdc4a44627d8928bf0564f8882a085e40978b58f84eb9cd75ea46f88ea55"
} |
For the module ct_rtu_expand_8, its AIG representation has 221 nodes and 517 edges. Given that I want to reduce power, how much power improvement is estimated, and what would the trade-offs be relative to the complexity of this graph? | The AIG for ct_rtu_expand_8 contains 221 nodes (79 $_AND_ and 140 $_NOT_ gates) with 517 edges and an average degree of 2.34. Applying the suggested power optimizations, including clock gating for registers and operand isolation, is estimated to reduce power by -25.0 while slightly improving area and delay by 5.0 each.... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_expand_8.v | ct_rtu_expand_8 | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[32976 chars elided]...
"node_count": 221,
"edge_count": 517,
"graph_properties": {
"node_types": {
"$_AND_": 79,
"$_NOT_": 140,
"port_input": 1,
"port_output": 1
},
"avg_degree": 2.34,
... | multi_tool | graph_extractor+optimization_advisor | compositional | 415eea2ea53c | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For the module ct_rtu_expand_8, its AIG representation has 221 nodes and 517 edges. Given that I want to reduce power, how much power improvement is estimated, and what would the trade-offs be relative to the complexity of this graph?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_... | 377e60df5dd8 | 39aaf0d85ef4 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_expand_8.v",
"sha256": "4ce9e12bcb4658ab96e101a1357918caff0a652f4090e952625cee2029d1c8d0"
} |
For the xgmii_deinterleave module, can you check how well the RTL structure carried through to the netlist and relate that to the module's own complexity? In particular, how many RTL signals were mapped successfully, what alignment score did the RTL-to-netlist mapping achieve, and how does the mapped signal count compa... | The RTL-to-netlist mapping for xgmii_deinterleave achieved an alignment score of 75.0, with 3 of the 4 RTL signals mapped and 1 unmapped signal (the 'wire' element). This matches the module's structure reported by static analysis: it has 3 total ports (1 input, 2 outputs), 3 wires, 16 assign statements, and a cyclomati... | github_repos/corundum_corundum/fpga/lib/eth/rtl/xgmii_deinterleave.v | xgmii_deinterleave | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"output_xgmii_d": [
"output_xgmii_d"
],
"wire": [],
"output_xgmii_c": [
"output_xgmii_c"
],
"input_xgmii_dc": [
"input_xgmii_dc"
]
},
"alignment_score": 75.0,
"unmapped_elements": [
"wi... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 351518e38c5b | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the xgmii_deinterleave module, can you check how well the RTL structure carried through to the netlist and relate that to the module's own complexity? In particular, how many RTL signals were mapped successfully, what alignment score did the RTL-to-netlist mapping achieve, and how does the mapped signal c... | 4c4f6bd434e2 | 3a78cd06f85f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/xgmii_deinterleave.v",
"sha256": "5ab0de601da6ac2917a980b4ad30dbcda86a1cfc62dfd52bd891e9b654c44cea"
} |
For the asic_mux2 module, how well do the RTL signals carry over to the gate-level netlist, and how does that compare to the complexity of its CDFG representation? | All 4 RTL signals (d0, d1, s, and z) map one-to-one to the netlist with an alignment score of 100.0 and no unmapped elements, even though the netlist contains 13 wires. The CDFG for asic_mux2 is correspondingly small, with 8 nodes and 11 edges, composed of 2 $and gates, 1 $not gate, 1 $or gate, 3 input ports, and 1 out... | github_repos/aolofsson_oh/asiclib/hdl/asic_mux2.v | asic_mux2 | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "CDFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"d0": [
"d0"
],
"s": [
"s"
],
"d1": [
"d1"
],
"z": [
"z"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 4,
"netlist_wires... | multi_tool | cross_stage_mapper+graph_extractor | compositional | be7b9b10876c | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}] | Question: For the asic_mux2 module, how well do the RTL signals carry over to the gate-level netlist, and how does that compare to the complexity of its CDFG representation?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"d0": [
"d0"
],
"s": [
"s"
],
"d1"... | 2174a9176c1c | 3b265ac5067a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_mux2.v",
"sha256": "7303a7344808038daa8dabc68ae8402ae937ff8d13d08447d54a7d59084bbb39"
} |
For the tim7_sec_top module, if I run the area-focused optimization flow, how will the trade-offs affect the design, and how does the module's CDFG structure relate to the recommendation to share arithmetic resources? | The CDFG for tim7_sec_top has 36 nodes and 208 edges with an average degree of 5.78, reflecting the dense connectivity between the timers_top and tim7_tim_top instances and their 26 input and 8 output ports. Applying the area optimization (e.g., aggressive resource sharing) is estimated to reduce area by -15.0 and powe... | github_repos/XUANTIE-RV_wujian100_open/soc/tim7.v | tim7_sec_top | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[23649 chars elided]...
"node_count": 36,
"edge_count": 208,
"graph_properties": {
"node_types": {
"tim7_tim_top": 1,
"port_input": 26,
"port_output": 8,
"timers_top": 1
},
"avg_degree"... | multi_tool | graph_extractor+optimization_advisor | compositional | f6f6492e4e3f | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the tim7_sec_top module, if I run the area-focused optimization flow, how will the trade-offs affect the design, and how does the module's CDFG structure relate to the recommendation to share arithmetic resources?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
.... | 088f97f71d19 | 3b2fe0052b6e | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/tim7.v",
"sha256": "c05aba5a2a659e207f9e92842c30c4db92075b1cb992a0be3da81e111a5681bb"
} |
For the pcileech_pcie module, does the RTL-to-netlist signal mapping fully cover everything described in the RTL, given the module's signal statistics, and how clean is the mapping? | The pcileech_pcie module declares 24 internal wires plus 22 ports (10 inputs, 12 outputs) in the RTL, and the RTL-to-netlist mapping successfully matched all 46 RTL signals to netlist wires (out of 49 netlist wires) with zero unmapped signals. The alignment score is 100.0 and there were no lint warnings, so the mapping... | github_repos/ufrisk_pcileech-fpga/sp605_ft601/pcileech_pcie.v | pcileech_pcie | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"m_axis_rx_tready": [
"m_axis_rx_tready"
],
"sys_clk_p": [
"sys_clk_p"
],
"sys_clk_c": [
"sys_clk_c"
],
"s_axis_tx_tvalid": [
"s_axis_tx_tvalid"
],
"pci_exp_txp": [
"pci_exp_t... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 80bbe69039a3 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the pcileech_pcie module, does the RTL-to-netlist signal mapping fully cover everything described in the RTL, given the module's signal statistics, and how clean is the mapping?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"m_axis_rx_tready": [
"m_axis_rx_tread... | e15f4eccfdcd | 3a7ca81701e3 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/ufrisk/pcileech-fpga",
"commit": "c538c4170678c13f723dc921905fb81ff3c71d8e",
"path": "sp605_ft601/pcileech_pcie.v",
"sha256": "d0455218ab15dffa574fa3b8c39bef602b316bbc88a0e68fa1b6bd213401859e"
} |
For tim7_sec_top, is the structural integrity of the design confirmed when you compare the RTL-to-netlist signal mapping against the source-level structure, considering the port counts, signal counts, and unmapped elements? | Yes, tim7_sec_top shows a clean structural check: all 21 RTL signals mapped to the netlist with 0 unmapped signals and an alignment score of 100.0, consistent with the static analysis showing 25 inputs, 6 outputs, 31 total ports, 36 wires, 3 assign statements, 0 always blocks, and no lint warnings across 170 lines of c... | github_repos/XUANTIE-RV_wujian100_open/soc/tim7.v | tim7_sec_top | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"pwrite": [
"pwrite",
"i_pwrite"
],
"paddr": [
"paddr"
],
"tim2_etb_trig": [
"tim2_etb_trig"
],
"presetn": [
"presetn"
],
"i_pwrite": [
"i_pwrite"
],
"pclk": [
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 672fc10983cd | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For tim7_sec_top, is the structural integrity of the design confirmed when you compare the RTL-to-netlist signal mapping against the source-level structure, considering the port counts, signal counts, and unmapped elements?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"p... | 5da70c485db4 | 3b2fe0052b6e | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/tim7.v",
"sha256": "c05aba5a2a659e207f9e92842c30c4db92075b1cb992a0be3da81e111a5681bb"
} |
For the ct_fspu_single module, how well does the RTL-to-netlist mapping line up, and if I apply the recommended area-focused optimizations, what impact should I expect on delay and power? | The mapping for ct_fspu_single is clean: all 39 RTL signals are mapped with an alignment score of 100.0 and zero unmapped signals against 637 netlist wires. Applying the recommended area optimizations, which include aggressive resource sharing of arithmetic operators, is estimated to improve area by -15.0 and power by ... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fspu_single.v | ct_fspu_single | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"check_nan": [
"check_nan"
],
"ex1_sing_neg_dn": [
"ex1_sing_neg_dn"
],
"ex1_op_fsgnj": [
"ex1_op_fsgnjx",
"ex1_op_fsgnjn",
"ex1_op_fsgnj"
],
"result_fmfvrs": [
"result_fmfvrs"
... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | a380c55c1b50 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the ct_fspu_single module, how well does the RTL-to-netlist mapping line up, and if I apply the recommended area-focused optimizations, what impact should I expect on delay and power?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"check_nan": [
"check_nan"
]... | b7bf0eb079c7 | 3bfb32f10371 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fspu_single.v",
"sha256": "41d3914ba097fc93358ef94f854ebe3af1cfc7d2d10e634d7aceecd84926d7ab"
} |
For the ct_pmp_acc module, the DFG analysis shows 35 nodes and 668 edges with node types like 8 $eq and 8 ct_pmp_comp_hit instances, and the area-focused optimization analysis suggests mux sharing and resource sharing; based on these results, is pursuing the area optimization worthwhile, and what trade-offs should I ex... | The DFG for ct_pmp_acc contains 35 nodes and 668 edges (average degree 19.09), including 8 $eq nodes and 8 ct_pmp_comp_hit instances, so there is significant duplicated comparison logic that the suggested resource sharing (share -aggressive) and mux optimization (muxcover; opt) could exploit. The area-targeted optimiza... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/pmp/rtl/ct_pmp_acc.v | ct_pmp_acc | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[31428 chars elided]...
"node_count": 35,
"edge_count": 668,
"graph_properties": {
"node_types": {
"$mux": 2,
"$eq": 8,
"$pmux": 1,
"$logic_not": 1,
"ct_pmp_comp_hit": 8,
"port_input"... | multi_tool | graph_extractor+optimization_advisor | compositional | 3906d4b24990 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the ct_pmp_acc module, the DFG analysis shows 35 nodes and 668 edges with node types like 8 $eq and 8 ct_pmp_comp_hit instances, and the area-focused optimization analysis suggests mux sharing and resource sharing; based on these results, is pursuing the area optimization worthwhile, and what trade-offs s... | d21b2d901ed7 | 3b6efb28c917 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/pmp/rtl/ct_pmp_acc.v",
"sha256": "fb11f016e1a1a982f842776ed8fd57cd16d8cb4fb1154cc50b3e1b454560737d"
} |
For fec_rot_8, considering both the RTL-to-netlist signal mapping and the structural analysis of the code, how well do the RTL signals line up with the synthesized netlist, and does the code structure suggest why some signals might be unmapped? | In fec_rot_8, only 2 of the 3 RTL signals (c and co) mapped to netlist wires, leaving count unmapped, with an alignment score of 66.67 across a netlist containing 62 wires. The module itself has just 3 total ports (2 inputs, 1 output), no always blocks, and 32 assign statements with an operator count of 324, so the pur... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_8.v | fec_rot_8 | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"co",
"c"
],
"count": [],
"co": [
"co"
]
},
"alignment_score": 66.67,
"unmapped_elements": [
"count"
],
"mapping_statistics": {
"rtl_signals": 3,
"netlist_wires": 62,
"ne... | multi_tool | cross_stage_mapper+static_analyzer | compositional | b5ace8a98837 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For fec_rot_8, considering both the RTL-to-netlist signal mapping and the structural analysis of the code, how well do the RTL signals line up with the synthesized netlist, and does the code structure suggest why some signals might be unmapped?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netli... | 6a9d6cf2a07e | 3c19c9f72930 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_8.v",
"sha256": "bd6bee4b47a79a3a6d04ab42e5d4a86c1e63457db0bb9e26fa2b7b22484487d5"
} |
For oh_dffqn, the area-focused optimization suggests sharing resources, but I'm worried about timing — what does the And-Inverter Graph (AIG) structure tell you about the logic involved, and is the area optimization worth it given its estimated effects on delay and power? | The AIG for oh_dffqn contains 5 nodes and 5 edges, consisting of 1 $_DFF_P_ flip-flop, 1 $_NOT_ inverter, 2 input ports and 1 output port, so the only combinational logic is a single inverter feeding the flip-flop's D input. The area optimization is estimated to reduce area by -15.0 and power by -10.0, but it increases... | github_repos/aolofsson_oh/stdlib/rtl/oh_dffqn.v | oh_dffqn | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[183 chars elided]...
"node_count": 5,
"edge_count": 5,
"graph_properties": {
"node_types": {
"$_DFF_P_": 1,
"$_NOT_": 1,
"port_input": 2,
"port_output": 1
},
"avg_degree": 1.0,
"modu... | multi_tool | graph_extractor+optimization_advisor | compositional | 9be350083f49 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For oh_dffqn, the area-focused optimization suggests sharing resources, but I'm worried about timing — what does the And-Inverter Graph (AIG) structure tell you about the logic involved, and is the area optimization worth it given its estimated effects on delay and power?
[graph_extractor {"graph_type": "AIG... | 70c0ec616150 | 3c2b7f2b98f0 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_dffqn.v",
"sha256": "af3e425cb52fee8e8d627cb50a466dc80eaba8e1ec1aa50a286629ee17206872"
} |
For cntr_updn, after synthesis the netlist has far more wires than the RTL had signals — can you summarize the structural and code characteristics that explain this expansion, using the RTL-to-netlist mapping results and the static analysis of the module? | In cntr_updn the RTL-to-netlist mapping shows only 1 mapped RTL signal (clk) against 285 netlist wires with 0 mapped cells but a perfect alignment score of 100.0, meaning the expansion comes entirely from synthesis rather than hand-instantiated structure. The static analysis explains this: the RTL has just 1 input port... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/counter/cntr_updn.v | cntr_updn | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": [
"clk"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 1,
"netlist_wires": 285,
"netlist_cells": 0,
"mapped_signals": 1,
"unmapped_signals": 0
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 055c9ee2a4aa | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For cntr_updn, after synthesis the netlist has far more wires than the RTL had signals — can you summarize the structural and code characteristics that explain this expansion, using the RTL-to-netlist mapping results and the static analysis of the module?
[cross_stage_mapper {}]
{
"status": "success",
"r... | 28b16ace5cbe | 3c78b58b65ac | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/counter/cntr_updn.v",
"sha256": "359be27c2a1f057a75d1f3715e5dfc1f6c2a826c67818dfb2d40330d86e753a9"
} |
For the cntr_updn module, how does the code complexity compare with the cost of the optimized hardware — could you summarize the key structural metrics along with the area, delay, and gate-count results after medium-level delay-focused optimization? | cntr_updn is a fairly complex single always block (17 lines of code, cyclomatic complexity 9, nesting depth 3, 144 operators) even though it has only 1 input port and 1 parameter. After synthesis it maps to 163 gates — including 16 $_DFFE_PP0P_ flip-flops, 21 $_XNOR_ and 31 $_AND_ cells — with an area of 207.5, a criti... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/counter/cntr_updn.v | cntr_updn | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "cntr_updn",
"port_count": {
"inputs": 1,
"outputs": 0,
"inouts": 0,
"total": 1
},
"signal_count": {
"wires": 0,
"regs": 0,
"parameters": 1,
"total": 0
},
"always_blocks": 1,
"assign_stateme... | multi_tool | static_analyzer+synthesis_tool | compositional | b8845b21f277 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the cntr_updn module, how does the code complexity compare with the cost of the optimized hardware — could you summarize the key structural metrics along with the area, delay, and gate-count results after medium-level delay-focused optimization?
[static_analyzer {"analysis_type": "full"}]
{
"status": "... | 14a3571179cd | 3c78b58b65ac | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/counter/cntr_updn.v",
"sha256": "359be27c2a1f057a75d1f3715e5dfc1f6c2a826c67818dfb2d40330d86e753a9"
} |
For the pcileech_mux module, how large is its AIG representation and is it worth applying the area-focused optimizations, given their estimated impact on delay? | The AIG for pcileech_mux contains 33624 nodes and 85200 edges (average degree 2.53), with node types including 14468 $_AND_ gates and 18788 $_NOT_ gates. The area-targeted optimization recipes (e.g., mux sharing via muxcover; opt and resource sharing via share -aggressive) estimate an area improvement of -15.0 and powe... | github_repos/ufrisk_pcileech-fpga/EnigmaX1/src/pcileech_mux.sv | pcileech_mux | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[47104 chars elided]...
"node_count": 33624,
"edge_count": 85200,
"graph_properties": {
"node_types": {
"$memrd": 28,
"$_AND_": 14468,
"$_NOT_": 18788,
"$_DFF_P_": 1,
"$_SDFFE_PP0P_": 9,
... | multi_tool | graph_extractor+optimization_advisor | compositional | e020063469d9 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the pcileech_mux module, how large is its AIG representation and is it worth applying the area-focused optimizations, given their estimated impact on delay?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[47104 chars elided]...
"node_count": 33624,
"edge_co... | 72d9d4cca2cd | 3c99226c56c1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/ufrisk/pcileech-fpga",
"commit": "c538c4170678c13f723dc921905fb81ff3c71d8e",
"path": "EnigmaX1/src/pcileech_mux.sv",
"sha256": "0c264ebf3ab163fbe122bc90ad03cb874809ac9f3e73048b563a768abbd5e63c"
} |
For eth_mac_dual_wrapper, how well does the netlist line up with the original RTL, what did the area-focused optimization analysis recommend and at what estimated cost, and how does that fit with what the structural analysis says about the module? | The RTL-to-netlist mapping only matched 7 of 11 RTL signals (alignment score 63.64), leaving signals like mac_rx_axis_tvalid_int unmapped, while the structural analysis shows eth_mac_dual_wrapper is a simple wrapper with 13 assign statements, no always blocks, cyclomatic complexity 3, and 4 instantiations (mac_02, mac_... | github_repos/corundum_corundum/fpga/mqnic/DK_DEV_AGF014EA/fpga_100g/rtl/eth_mac_dual_wrapper.v | eth_mac_dual_wrapper | cross_stage_mapper+optimization_advisor+static_analyzer | [
{},
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"wire": [],
"mac_rx_axis_tvalid_int": [],
"rx_serial_data_p": [
"rx_serial_data_p"
],
"ctrl_rst": [
"ctrl_rst"
],
"ref_clk": [
"ref_clk"
],
"mac_rx_axis_tuser_int": [],
"tx_serial_dat... | multi_tool | cross_stage_mapper+optimization_advisor+static_analyzer | compositional | cb99078e2d79 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For eth_mac_dual_wrapper, how well does the netlist line up with the original RTL, what did the area-focused optimization analysis recommend and at what estimated cost, and how does that fit with what the structural analysis says about the module?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_ne... | 169540daf7f7 | 3cc0ede94f13 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/mqnic/DK_DEV_AGF014EA/fpga_100g/rtl/eth_mac_dual_wrapper.v",
"sha256": "d4b9d772cf254c0721701b8a9fc19850575f148fe4840c5a405bae136938057c"
} |
For the asic_aoi222 module, how do the RTL-to-netlist mapping results compare with its AIG structure in terms of port and signal coverage? | The cross-stage mapping shows all 7 RTL signals mapped with an alignment score of 100.0 and no unmapped elements, while the AIG for asic_aoi222 contains 19 nodes and 29 edges with 6 port_input, 1 port_output, 5 $_AND_, and 7 $_NOT_ nodes and an average degree of 1.53. This is consistent, since the 7 mapped RTL signals ... | github_repos/aolofsson_oh/asiclib/hdl/asic_aoi222.v | asic_aoi222 | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "AIG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"a0": [
"a0"
],
"z": [
"z"
],
"b0": [
"b0"
],
"b1": [
"b1"
],
"c0": [
"c0"
],
"a1": [
"a1"
],
"c1": [
"c1"
]
},
"alignment_score": 100.0,
... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 65a409b0ff15 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}] | Question: For the asic_aoi222 module, how do the RTL-to-netlist mapping results compare with its AIG structure in terms of port and signal coverage?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"a0": [
"a0"
],
"z": [
"z"
],
"b0": [
"b0"
],
... | 78e4234c56e0 | 3ce325d3a8d3 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_aoi222.v",
"sha256": "6346decc4f2c6955a0d0446c0596d2946f036e589745f03f7433f5b172ff3909"
} |
For the ct_iu_special module, how well do the RTL signals carry over into the netlist mapping, considering the module's overall structural and complexity characteristics from static analysis? | The ct_iu_special module has 77 RTL signals (67 wires, 10 regs) with 70 of them successfully mapped to netlist wires for an alignment score of 90.91, leaving 7 unmapped signals such as special_ex1_expt_vld and special_ex1_inst_vld. This is a structurally sizable design with 18 inputs, 13 outputs, 7 always blocks, 68 as... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/iu/rtl/ct_iu_special.v | ct_iu_special | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"special_ex1_expt_vld": [],
"ex1_inst_clk": [
"ex1_inst_clk_en",
"ex1_inst_clk"
],
"special_ex1_inst_vsetvl": [
"special_ex1_inst_vsetvl",
"special_ex1_inst_vsetvli"
],
"idu_iu_rf_special_gatec... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 64614ac39ca7 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ct_iu_special module, how well do the RTL signals carry over into the netlist mapping, considering the module's overall structural and complexity characteristics from static analysis?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"special_ex1_expt_vld": [],
"e... | 3798d92339c6 | 3cf9929d6cb8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/iu/rtl/ct_iu_special.v",
"sha256": "95b34fd4cf45e6867f81a0516fa6d90dc58dad09150b6985bb3ebd17c6ef734e"
} |
For the gearbox_20_22 module, how does the structural complexity seen in its control/data-flow graph (CDFG) relate to the area and timing results after medium-effort delay-aware synthesis, and do the flop counts line up? | The CDFG for gearbox_20_22 contains 29 nodes and 854 edges with an average degree of 29.45, including 5 $dff, 2 $dffe, and 1 $sdff nodes, which is consistent with the synthesized netlist's 64 $_DFF_P_, 20 $_DFFE_PN_ plus 1 $_DFFE_PP_, and 4 $_SDFF_PP0_ cells. Synthesis at medium effort reports an area of 868.5, a gate ... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/gearbox_20_22.v | gearbox_20_22 | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[28301 chars elided]...
"node_count": 29,
"edge_count": 854,
"graph_properties": {
"node_types": {
"$add": 1,
"$mux": 2,
"$reduce_or": 1,
"$dffe": 2,
"$dff": 5,
"$sdff": 1,
"$... | multi_tool | graph_extractor+synthesis_tool | compositional | 1b6267784b28 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the gearbox_20_22 module, how does the structural complexity seen in its control/data-flow graph (CDFG) relate to the area and timing results after medium-effort delay-aware synthesis, and do the flop counts line up?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG"... | 49ff04338864 | 3d34f0cdbe97 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/gearbox_20_22.v",
"sha256": "509a8b3d894cb8d4b6071116bcac4c8955f5e9d6b9484b420b33120ada80df25"
} |
For the gearbox_20_67 module, how does its code complexity compare with its synthesized cost, considering the delay-optimized synthesis results? | The gearbox_20_67 module has 68 lines of code with a cyclomatic complexity of 11 and nesting depth of 3, but this relatively modest source expands to 1152 gates and an area of 1168.5 after medium-level optimization. That logic yields a critical-path delay of 379.93 with power of 1.152, and the RTL contains 1 always blo... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/gearbox_20_67.v | gearbox_20_67 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "gearbox_20_67",
"port_count": {
"inputs": 4,
"outputs": 2,
"inouts": 0,
"total": 6
},
"signal_count": {
"wires": 1,
"regs": 8,
"parameters": 0,
"total": 9
},
"always_blocks": 1,
"assign_sta... | multi_tool | static_analyzer+synthesis_tool | compositional | 2bed6aefc830 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the gearbox_20_67 module, how does its code complexity compare with its synthesized cost, considering the delay-optimized synthesis results?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "gearbox_20_67",
"port_count": {
"inputs": 4,
"outputs": 2,
"ino... | c29c2243e353 | 3d532992a878 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/gearbox_20_67.v",
"sha256": "9d04b93fb04d1a03125751ed800b988c0b406d512a8721b2d7ef4aa476248ae2"
} |
For the remove_parity module, how does its RTL complexity relate to what synthesis actually produced, and is there anything in the structural results that looks inconsistent? | The RTL for remove_parity is moderately complex for its size, with 17 lines of code, cyclomatic complexity 3, 144 operators, and 1 assign statement, yet synthesis reports an empty netlist: area 0, gate_count 0, delay 0.0, and power 0.0. Synthesis did elaborate 7 public wires totaling 140 wire bits across 2 ports (95 po... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/storage/remove_parity.v | remove_parity | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "remove_parity",
"port_count": {
"inputs": 0,
"outputs": 0,
"inouts": 0,
"total": 0
},
"signal_count": {
"wires": 0,
"regs": 0,
"parameters": 2,
"total": 0
},
"always_blocks": 0,
"assign_sta... | multi_tool | static_analyzer+synthesis_tool | compositional | 450c2c2fe057 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the remove_parity module, how does its RTL complexity relate to what synthesis actually produced, and is there anything in the structural results that looks inconsistent?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "remove_parity",
"port_count": {
"inputs":... | 71a2e9e9fac6 | 3d49323a2f83 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/storage/remove_parity.v",
"sha256": "04ed5d5f4b71d7f06a8e5b826844242a035b9ceee73ffd5ada3903f7a1fbc31e"
} |
For oh_aoi211, if I run the suggested area-optimization flow with aggressive resource sharing, what current synthesis figures would it act on, and what improvements and trade-offs should I expect? | The current implementation of oh_aoi211 uses 3 gates (one $_AND_, one $_NAND_, one $_NOR_) with an area of 3.0, a delay of 60.25, a power of 0.003, and 7 wires/7 wire bits. The area-oriented recipes, including aggressive sharing, estimate an area improvement of -15.0 and power improvement of -10.0, but with a delay inc... | github_repos/aolofsson_oh/stdlib/rtl/oh_aoi211.v | oh_aoi211 | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top oh_aoi211 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+synthesis_tool | compositional | 5628419c8fbb | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For oh_aoi211, if I run the suggested area-optimization flow with aggressive resource sharing, what current synthesis figures would it act on, and what improvements and trade-offs should I expect?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommen... | f964ffb3cabd | 3d9ad9f0b6c0 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_aoi211.v",
"sha256": "5ad192134169db337c7b52d5619dd9393033cb93d822630d5ebb5546031fa67c"
} |
For the oh_ao221 module, how does the CDFG structure of its logic compare with the RTL-to-netlist mapping results — specifically, what does the graph tell us about the module's logic and how well does that align with the netlist mapping? | The CDFG for oh_ao221 contains 10 nodes and 12 edges, comprising 2 $and nodes, 2 $or nodes, 5 input ports and 1 output port with an average degree of 1.2, while the cross-stage mapping reports 18 netlist wires but 0 netlist cells, 0 RTL signals and an alignment score of 0.0. This means the module's combinational AND/OR... | github_repos/aolofsson_oh/stdlib/rtl/oh_ao221.v | oh_ao221 | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "CDFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 0,
"netlist_wires": 18,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 0
},
"error": null
}
[graph_extract... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 24b6f966320c | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}] | Question: For the oh_ao221 module, how does the CDFG structure of its logic compare with the RTL-to-netlist mapping results — specifically, what does the graph tell us about the module's logic and how well does that align with the netlist mapping?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapp... | 88f35fdfedf8 | 3e2a2921d253 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_ao221.v",
"sha256": "d9305596f7a242ffaac819ec7b515db1ac1824a5223c63b68189e7cac3c2516e"
} |
For the axi_adxcvr module, how do the cell counts from the synthesized netlist compare with the node-type counts in its AIG graph representation, and what are the resulting area and critical path delay after medium-level optimization? | The AIG graph of axi_adxcvr contains 32 nodes including 3 $_AND_ nodes, one axi_adxcvr_up, and one up_axi, which matches the synthesis cell breakdown of 5 total cells: 3 $_AND_ gates, 1 axi_adxcvr_up, and 1 up_axi. The optimized design has an area of 5.0 and a critical path delay of 81.03. | github_repos/analogdevicesinc_hdl/library/intel/axi_adxcvr/axi_adxcvr.v | axi_adxcvr | graph_extractor+synthesis_tool | [
{
"graph_type": "AIG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[22552 chars elided]...
"node_count": 32,
"edge_count": 306,
"graph_properties": {
"node_types": {
"$_AND_": 3,
"up_axi": 1,
"axi_adxcvr_up": 1,
"port_output": 10,
"port_input": 17
},
... | multi_tool | graph_extractor+synthesis_tool | compositional | 14abced42348 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_adxcvr module, how do the cell counts from the synthesized netlist compare with the node-type counts in its AIG graph representation, and what are the resulting area and critical path delay after medium-level optimization?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_... | 8864996e9e5a | 3e744fef709c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/intel/axi_adxcvr/axi_adxcvr.v",
"sha256": "9b85ee43f4e48c4ac82ce659a8df3a50c696d745b808cda38645b258c2a1009a"
} |
For the axi_adxcvr module, how would applying the delay-focused optimization recommendations affect the current synthesis results, considering the reported critical path and area? | The current synthesis of axi_adxcvr has a critical path estimate of 81.03 with an area of 5.0 and power of 0.005, and the delay-targeted optimization advisor estimates a delay improvement of -20.0 while increasing area by 10.0 and power by 5.0. The suggested recipes include running opt -fast, abc -fast -liberty stdcell... | github_repos/analogdevicesinc_hdl/library/intel/axi_adxcvr/axi_adxcvr.v | axi_adxcvr | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top axi_adxcvr",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"des... | multi_tool | optimization_advisor+synthesis_tool | compositional | 05ce9d8a3016 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_adxcvr module, how would applying the delay-focused optimization recommendations affect the current synthesis results, considering the reported critical path and area?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [... | a824c197ed8a | 3e744fef709c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/intel/axi_adxcvr/axi_adxcvr.v",
"sha256": "9b85ee43f4e48c4ac82ce659a8df3a50c696d745b808cda38645b258c2a1009a"
} |
For ct_f_spsram_32768x128, given its RTL structure and the synthesis results, summarize the design's size and structural characteristics, and note whether the reported cell count is consistent with the RTL's instantiation style. | The RTL of ct_f_spsram_32768x128 is small (65 lines of code, cyclomatic complexity 5, nesting depth 4) with only 3 inputs, 1 always block, and 2 assign statements, relying on a generate-based instantiation. Synthesis maps this to 317 cells (128 $_ANDNOT_, 15 $_DFF_P_, 30 $_NAND_, 1 $_NOR_, 15 $_ORNOT_, and 128 fpga_ram... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_32768x128.v | ct_f_spsram_32768x128 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "ct_f_spsram_32768x128",
"port_count": {
"inputs": 3,
"outputs": 0,
"inouts": 0,
"total": 3
},
"signal_count": {
"wires": 3,
"regs": 0,
"parameters": 3,
"total": 3
},
"always_blocks": 1,
"as... | multi_tool | static_analyzer+synthesis_tool | compositional | 149b27b05082 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For ct_f_spsram_32768x128, given its RTL structure and the synthesis results, summarize the design's size and structural characteristics, and note whether the reported cell count is consistent with the RTL's instantiation style.
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_n... | 730624a426b7 | 3e94bab37661 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_32768x128.v",
"sha256": "1ddbdb066a6feffe2221c814f971b3173844f5421e0dc25954eb4063c500407c"
} |
For axi_adrv9001, considering its delay optimization recommendations and its code complexity profile, is the suggested pipelining approach appropriate, and what delay improvement and trade-offs are expected? | The delay optimization estimates a -20.0 delay improvement but at the cost of about 10.0 more area and 5.0 more power. Since axi_adrv9001 is purely combinational (0 always blocks, 24 assign statements, 0 regs, nesting depth 0) with 524 operators across 566 lines of code, register retiming/pipelining as suggested is fea... | github_repos/analogdevicesinc_hdl/library/axi_adrv9001/axi_adrv9001.v | axi_adrv9001 | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top axi_adrv9001",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"d... | multi_tool | optimization_advisor+static_analyzer | compositional | 31853b946703 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For axi_adrv9001, considering its delay optimization recommendations and its code complexity profile, is the suggested pipelining approach appropriate, and what delay improvement and trade-offs are expected?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay"... | c877e012f8e8 | 3ef705a966a4 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_adrv9001/axi_adrv9001.v",
"sha256": "a2c5001bf41ee5a3b3963519e863d88d5d7fb039eadc896690a9e9bfb37c9939"
} |
For system_timer_tb, the delay-focused optimization advisor suggests pipelining and logic duplication with an estimated 20% delay improvement — given the module's structure (0 ports, 39 lines of code, instantiating system_timer among others), does that advice make sense, and what would the answer summarize from both th... | The delay optimization advice is questionable because system_timer_tb is a testbench: it has 0 inputs, 0 outputs, and 0 total ports, 9 wires and 1 register, and it instantiates other modules (including system_timer), so delay/area/power trade-offs (estimated delay -20.0, area +10.0, power +5.0) apply to the DUT rather ... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/counter/system_timer_tb.v | system_timer_tb | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top system_timer_tb",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
... | multi_tool | optimization_advisor+static_analyzer | compositional | 8b3e154e7c83 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For system_timer_tb, the delay-focused optimization advisor suggests pipelining and logic duplication with an estimated 20% delay improvement — given the module's structure (0 ports, 39 lines of code, instantiating system_timer among others), does that advice make sense, and what would the answer summarize fr... | 492eeb69e6bc | 3ef646c97514 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/counter/system_timer_tb.v",
"sha256": "ff9ad8b3b963eb27beb2b2367cd6414f19e7ca7fad663678fda5cbfdca38a3da"
} |
For the BUFIO module, how does its CDFG structure relate to its overall complexity — is it really just a straight pass-through buffer, and what in the analyses supports that? | Yes, BUFIO is a pure pass-through buffer: its CDFG has only 2 nodes (one input port and one output port) with 0 edges, matching the static analysis showing just 1 input and 1 output port and 0 always blocks. The complexity figures confirm this — cyclomatic complexity of 1, nesting depth of 0, and a single assign statem... | github_repos/aolofsson_oh/xilibs/dv/BUFIO.v | BUFIO | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
"node_count": 2,
"edge_count": 0,
"graph_properties": {
"node_types": {
"port_output": 1,
"port_input": 1
},
"avg_degree": 0.0,
"module_name": "BUFIO"
},
"error": null
}
[static_analyzer {"an... | multi_tool | graph_extractor+static_analyzer | compositional | f60b2dcf6662 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the BUFIO module, how does its CDFG structure relate to its overall complexity — is it really just a straight pass-through buffer, and what in the analyses supports that?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
"node_count": 2,
"edge_count": 0,
"gra... | a0b894811f6a | 3f76ebfedef3 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "xilibs/dv/BUFIO.v",
"sha256": "1d686682baa19a8d6ebfef420c3c2433043756bb61df92a9125dcca1c77017ba"
} |
For the ct_had_ctrl module, how well did the RTL signals carry over to the gate-level netlist given its size and complexity, and which signals did not map? | ct_had_ctrl is a fairly large sequential block (493 lines of code, 29 cyclomatic complexity, 2753 operators, 8 always blocks, 124 signals), and cross-stage mapping preserved 119 of those 124 RTL signals into the netlist (355 netlist wires) for an alignment score of 95.97, with the 5 unmapped signals being ctrl_go_noex,... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/had/rtl/ct_had_ctrl.v | ct_had_ctrl | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ctrl_regs_freeze_pcfifo": [
"ctrl_regs_freeze_pcfifo"
],
"ctrl_tee_dbg_disable": [
"ctrl_tee_dbg_disable"
],
"go_in_dbg": [
"go_in_dbg"
],
"had_rtu_dbg_req_en": [
"had_rtu_dbg_req_en"
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 131452f3bddf | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ct_had_ctrl module, how well did the RTL signals carry over to the gate-level netlist given its size and complexity, and which signals did not map?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ctrl_regs_freeze_pcfifo": [
"ctrl_regs_freeze_pcfifo"
],
... | dc8f8587afb9 | 4019b2166ca0 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/had/rtl/ct_had_ctrl.v",
"sha256": "acb2d3bfd7e052a4eeca6f4f8a4b07638cc4ccb9bec31d4550e016250185c1b0"
} |
For test_axis_cobs_encode_zero_frame, what area-optimization steps are recommended, and given the module's complexity and structure, is the estimated area reduction worth the trade-offs? | For test_axis_cobs_encode_zero_frame, the recommended flow is to flatten with 'synth -top test_axis_cobs_encode_zero_frame -flatten', run 'opt -full; share -aggressive; opt', map with 'abc -g gates -liberty stdcells.lib', and clean up with 'opt_clean -purge', with resource sharing suggested for arithmetic operators. Th... | github_repos/alexforencich_verilog-ethernet/lib/axis/tb/test_axis_cobs_encode_zero_frame.v | test_axis_cobs_encode_zero_frame | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top test_axis_cobs_encode_zero_frame -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_sugge... | multi_tool | optimization_advisor+static_analyzer | compositional | be1562534658 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For test_axis_cobs_encode_zero_frame, what area-optimization steps are recommended, and given the module's complexity and structure, is the estimated area reduction worth the trade-offs?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipe... | 9a865cfbabdf | 4020de2bf4df | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "lib/axis/tb/test_axis_cobs_encode_zero_frame.v",
"sha256": "3d212d1f84cc4c64c1244b71e0278f0cc579cd73f8912a482847ef9aa5e8f335"
} |
For the oh_xor2 module, summarize how its structure from the code relates to what gets implemented after synthesis for delay and area — including how many cells it maps to, the critical path, and how its complexity metrics compare? | oh_xor2 is a trivially simple module — 8 lines of code with cyclomatic complexity 1 and a single assign statement containing 20 operators — and after synthesis it maps to exactly 1 XOR gate (cell_breakdown $_XOR_ = 1), giving an area of 2.0, a delay/critical path of 80.0, and power of 0.001 across its 3 wires and 3 wir... | github_repos/aolofsson_oh/stdlib/rtl/oh_xor2.v | oh_xor2 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "oh_xor2",
"port_count": {
"inputs": 0,
"outputs": 0,
"inouts": 0,
"total": 0
},
"signal_count": {
"wires": 0,
"regs": 0,
"parameters": 1,
"total": 0
},
"always_blocks": 0,
"assign_statement... | multi_tool | static_analyzer+synthesis_tool | compositional | e7957d7eabc0 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_xor2 module, summarize how its structure from the code relates to what gets implemented after synthesis for delay and area — including how many cells it maps to, the critical path, and how its complexity metrics compare?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"modul... | b798993182bc | 4030f7a8f5fd | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_xor2.v",
"sha256": "d3434982f64a255173f15ddb5f967fbb0f263996d0533c68458f925d64cf9098"
} |
For the module oh_xor2, the data-flow graph analysis shows a small DFG structure and the synthesis run with medium optimization reports area, delay, and gate usage—can you summarize the module's structure by combining the DFG statistics (nodes, edges, node types) with the synthesized gate count, area, delay, and power ... | The oh_xor2 module's DFG has 4 nodes and 3 edges, consisting of exactly one $xor node plus 2 port_input and 1 port_output nodes with an average degree of 0.75, which matches synthesis producing a single $_XOR_ gate with area 2.0, delay 80.0, and power 0.001. The cross-stage mapping found 0 RTL signals and 0 cells mappe... | github_repos/aolofsson_oh/stdlib/rtl/oh_xor2.v | oh_xor2 | cross_stage_mapper+graph_extractor+synthesis_tool | [
{},
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 0,
"netlist_wires": 6,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 0
},
"error": null
}
[graph_extracto... | multi_tool | cross_stage_mapper+graph_extractor+synthesis_tool | compositional | 0ed864817485 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the module oh_xor2, the data-flow graph analysis shows a small DFG structure and the synthesis run with medium optimization reports area, delay, and gate usage—can you summarize the module's structure by combining the DFG statistics (nodes, edges, node types) with the synthesized gate count, area, delay, ... | 2c2ffbaef072 | 4030f7a8f5fd | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_xor2.v",
"sha256": "d3434982f64a255173f15ddb5f967fbb0f263996d0533c68458f925d64cf9098"
} |
For the pcie_tlp_mux module, how does its code complexity from static analysis compare with its synthesis results, and does it look like a reasonable implementation? | Static analysis reports pcie_tlp_mux has 436 lines of code, cyclomatic complexity 56, 40 total ports, and 4 always blocks with 14 assign statements, while synthesis at medium optimization yields 7227 gates, an area of 11017.0, a delay of 850.86, and a power of 7.227. The moderate gate count relative to the complexity, ... | github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_tlp_mux.v | pcie_tlp_mux | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "pcie_tlp_mux",
"port_count": {
"inputs": 19,
"outputs": 21,
"inouts": 0,
"total": 40
},
"signal_count": {
"wires": 4,
"regs": 7,
"parameters": 12,
"total": 11
},
"always_blocks": 4,
"assign... | multi_tool | static_analyzer+synthesis_tool | compositional | 019eb1da0f31 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the pcie_tlp_mux module, how does its code complexity from static analysis compare with its synthesis results, and does it look like a reasonable implementation?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "pcie_tlp_mux",
"port_count": {
"inputs": 19,
"... | 789e0936fb9f | 406bb289c2ac | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/rtl/pcie_tlp_mux.v",
"sha256": "73fb3855161b9c81801ee612152046791b9fee5a75b36f1919d5268c5138c340"
} |
For crc32_dat40, how well do the RTL signals carry over to the synthesized netlist, and how do the mapping results compare with the cell counts and delay reported after medium-level optimization? | All 7 RTL signals mapped successfully with a 100.0 alignment score and no unmapped elements, with x7 expanded into five netlist signals (x73, x79, x76, x74, x70). The optimized netlist consists of 124 xor6 cells plus 1 crc32_dat40_factor instance (125 gates total, area 125.0), against 199 netlist wires in the mapping a... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc32_dat40.v | crc32_dat40 | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
],
"x7": [
"x73",
"x79",
"x76",
"x74",
"x70"
],
"c0": [
"c0"
],
"crc_in": [
"crc_in"
],
"d0": [
"d0"
],
"crc_out": [
... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | 37ab869e70a4 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For crc32_dat40, how well do the RTL signals carry over to the synthesized netlist, and how do the mapping results compare with the cell counts and delay reported after medium-level optimization?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
... | 718e594c6551 | 40849d28674f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc32_dat40.v",
"sha256": "5f89f770abd2a84115f2e786abf72d830a934623d8d6af45f864cebe9ad84d0b"
} |
For the encoder_8b10b module, how does the control-flow/data-flow structure relate to the delay-optimized synthesis results — specifically, what do the CDFG statistics and the combinational cell mix suggest about the logic that dominates the 143.58 critical path delay? | The CDFG analysis of encoder_8b10b shows 170 nodes with 2103 edges and an average degree of 12.37, dominated by 109 mux nodes (plus 22 $logic_not, 4 $xor, and 13 stratixii_lcell_comb nodes), indicating routing-heavy multiplexing logic that likely drives the critical path estimate of 143.58. Synthesis confirms this mix,... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/encoder_8b10b.v | encoder_8b10b | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[51109 chars elided]...
"node_count": 170,
"edge_count": 2103,
"graph_properties": {
"node_types": {
"$adffe": 3,
"$logic_not": 22,
"$and": 5,
"$xor": 4,
"$or": 3,
"$mux": 109,
... | multi_tool | graph_extractor+synthesis_tool | compositional | 363e6b229558 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the encoder_8b10b module, how does the control-flow/data-flow structure relate to the delay-optimized synthesis results — specifically, what do the CDFG statistics and the combinational cell mix suggest about the logic that dominates the 143.58 critical path delay?
[graph_extractor {"graph_type": "CDFG"}... | b63d6093ed7c | 407f20613008 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/encoder_8b10b.v",
"sha256": "6c2a7eaad56489ecbafe384cfd1e235a363f5a3a8001cee0d6f177e3fc24887b"
} |
For crc32_dat40, how did the signals from the RTL map into the netlist, and if I apply the area-focused optimization recommendations, what delay impact should I expect? | The RTL signals of crc32_dat40 mapped cleanly with an alignment score of 100.0, all 7 mapped signals accounted for and 0 unmapped, with x7 expanded into five netlist wires (x73, x79, x76, x74, x70) among 199 total netlist wires. However, applying the area optimization (including aggressive resource sharing of arithmeti... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc32_dat40.v | crc32_dat40 | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
],
"x7": [
"x73",
"x79",
"x76",
"x74",
"x70"
],
"c0": [
"c0"
],
"crc_in": [
"crc_in"
],
"d0": [
"d0"
],
"crc_out": [
... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | 4f9b579d989e | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For crc32_dat40, how did the signals from the RTL map into the netlist, and if I apply the area-focused optimization recommendations, what delay impact should I expect?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
],
"x7": [
"x73"... | 5daff75be42a | 40849d28674f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc32_dat40.v",
"sha256": "5f89f770abd2a84115f2e786abf72d830a934623d8d6af45f864cebe9ad84d0b"
} |
For the erx_remap module, can you cross-check the RTL signals against the synthesized netlist and tell me which signals didn't carry through, and how good the overall mapping was? | The RTL for erx_remap has 13 signals total, of which 10 mapped successfully to the netlist and 3 did not: emesh_access_out, remap_en, and addr_out, giving an alignment score of 76.92. The RTL itself declares 6 wires and 1 register across 7 ports, and the netlist side contains 1013 wires, so the unmapped outputs are wor... | github_repos/aolofsson_oh/elink/hdl/erx_remap.v | erx_remap | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"emesh_access_out": [],
"remap_sel": [
"remap_sel"
],
"clk": [
"clk"
],
"remap_mux": [
"remap_mux"
],
"emesh_access_in": [
"emesh_access_in"
],
"remap_pattern": [
"remap_p... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 367dd7bd64e3 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the erx_remap module, can you cross-check the RTL signals against the synthesized netlist and tell me which signals didn't carry through, and how good the overall mapping was?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"emesh_access_out": [],
"remap_sel": [
... | cc7c081fb625 | 40b618ec4e5c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "elink/hdl/erx_remap.v",
"sha256": "157a85f5a314a6709cb7f58d3c202f4e0b3de18a7fb695a82cf3684b490d7594"
} |
For the system_top module, compare what the structural analysis and the synthesis results tell you about its size and complexity: how do the port/signal counts and cyclomatic complexity line up with the gate count, wire count, and critical-path delay and power figures? | Structurally, system_top is a large but simple wiring shell: it has 92 total ports (23 inputs, 41 outputs, 28 inouts), 24 signals, 37 assign statements, no always blocks, and a cyclomatic complexity of only 2 across 436 lines of code. Synthesis after medium-level optimization reflects that pass-through nature with just... | github_repos/analogdevicesinc_hdl/projects/ad_quadmxfe1_ebz/vcu118/system_top.v | system_top | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "system_top",
"port_count": {
"inputs": 23,
"outputs": 41,
"inouts": 28,
"total": 92
},
"signal_count": {
"wires": 21,
"regs": 3,
"parameters": 0,
"total": 24
},
"always_blocks": 0,
"assign_... | multi_tool | static_analyzer+synthesis_tool | compositional | 3006fc352718 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the system_top module, compare what the structural analysis and the synthesis results tell you about its size and complexity: how do the port/signal counts and cyclomatic complexity line up with the gate count, wire count, and critical-path delay and power figures?
[static_analyzer {"analysis_type": "ful... | 057abf072341 | 40d08e0da0d5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/ad_quadmxfe1_ebz/vcu118/system_top.v",
"sha256": "c582175c550bbb849ad2dc29f68b04856805fbb4be92446ae15d9d9a902783fe"
} |
For encoder_8b10b, considering the RTL-to-gate mapping results, the area optimization recommendations, and the code structure analysis, is the module a good candidate for area reduction, and what would the mapping and optimization results need to be checked against after applying the suggested transformations? | The module encoder_8b10b has 41 RTL signals of which only 19 are mapped to netlist wires (22 unmapped, alignment score 46.34), so area optimization should be postponed until mapping improves. If the suggested recipes are applied, the estimated improvement is -15.0 in area but with a delay increase of 5.0, while the cod... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/encoder_8b10b.v | encoder_8b10b | cross_stage_mapper+optimization_advisor+static_analyzer | [
{},
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"G": [
"G"
],
"rst": [
"rst"
],
"eout_dat": [],
"kin_ena": [
"kin_ena"
],
"enable": [],
"L40": [],
"B": [
"B"
],
"rdout_x": [],
"ein_dat": [
"ein_dat
...[772 c... | multi_tool | cross_stage_mapper+optimization_advisor+static_analyzer | compositional | a25206bae3fa | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For encoder_8b10b, considering the RTL-to-gate mapping results, the area optimization recommendations, and the code structure analysis, is the module a good candidate for area reduction, and what would the mapping and optimization results need to be checked against after applying the suggested transformations... | ea3404c4ef2d | 407f20613008 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/encoder_8b10b.v",
"sha256": "6c2a7eaad56489ecbafe384cfd1e235a363f5a3a8001cee0d6f177e3fc24887b"
} |
For the axi_ad9467_channel module, how does the structure shown in its CDFG relate to the synthesis results after delay and area optimization at medium effort, and do the two views agree on the submodule composition? | The CDFG of axi_ad9467_channel contains 22 nodes and 328 edges with an average degree of 14.91, including one instance each of ad_datafmt, axi_ad9467_pnmon, and up_adc_channel plus 11 input ports and 8 output ports. Synthesis reports exactly 3 cells matching those same three submodule types, with a delay of 69.52, area... | github_repos/analogdevicesinc_hdl/library/axi_ad9467/axi_ad9467_channel.v | axi_ad9467_channel | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[23488 chars elided]...
"node_count": 22,
"edge_count": 328,
"graph_properties": {
"node_types": {
"axi_ad9467_pnmon": 1,
"ad_datafmt": 1,
"up_adc_channel": 1,
"port_input": 11,
"port_out... | multi_tool | graph_extractor+synthesis_tool | compositional | 093526470f34 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_ad9467_channel module, how does the structure shown in its CDFG relate to the synthesis results after delay and area optimization at medium effort, and do the two views agree on the submodule composition?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
..... | 959df89e5a10 | 40e911238939 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9467/axi_ad9467_channel.v",
"sha256": "2e26bcfb5ee359610a34e93898d394800e38f3eb5f18bb5eca0f1a6d9300002c"
} |
For the oh_clockmux2 module, does the size and structure of its dataflow graph match the complexity reported by static analysis — can you summarize how the DFG node counts compare to the code complexity metrics? | The oh_clockmux2 module's DFG has 8 nodes and 9 edges with node types of 2 $and gates, 1 $or gate, 4 input ports, and 1 output port, while static analysis reports 31 lines of code, cyclomatic complexity of 4, nesting depth of 3, and 59 operators. This shows a simple combinational structure: the small gate-level graph (... | github_repos/aolofsson_oh/stdlib/rtl/oh_clockmux2.v | oh_clockmux2 | graph_extractor+static_analyzer | [
{
"graph_type": "DFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[1786 chars elided]...
"node_count": 8,
"edge_count": 9,
"graph_properties": {
"node_types": {
"$and": 2,
"$or": 1,
"port_input": 4,
"port_output": 1
},
"avg_degree": 1.12,
"module_na... | multi_tool | graph_extractor+static_analyzer | compositional | 170033307259 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the oh_clockmux2 module, does the size and structure of its dataflow graph match the complexity reported by static analysis — can you summarize how the DFG node counts compare to the code complexity metrics?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[1786 ... | 4c90204287dd | 413f2d24a0b9 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_clockmux2.v",
"sha256": "ebf31aaf53953f19271f9ddbc83f40cc011f741ecf4800fb2c415c2297e57dc1"
} |
For the axi_ad9467_channel module, how does its CDFG structure relate to the synthesized netlist, and is it worth applying the suggested delay optimization given the current critical path? Please summarize the structure, current timing/area/power, and expected trade-offs. | The CDFG of axi_ad9467_channel has 22 nodes and 328 edges (average degree 14.91), with one instance each of axi_ad9467_pnmon, ad_datafmt, and up_adc_channel, which matches the synthesized netlist of exactly 3 cells and 25 wires (146 wire bits) with a critical path delay of 69.52, area 3.0, and power 0.003. Applying the... | github_repos/analogdevicesinc_hdl/library/axi_ad9467/axi_ad9467_channel.v | axi_ad9467_channel | graph_extractor+optimization_advisor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[23938 chars elided]...
"node_count": 22,
"edge_count": 328,
"graph_properties": {
"node_types": {
"axi_ad9467_pnmon": 1,
"ad_datafmt": 1,
"up_adc_channel": 1,
"port_input": 11,
"port_out... | multi_tool | graph_extractor+optimization_advisor+synthesis_tool | compositional | 23be99b76f21 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_ad9467_channel module, how does its CDFG structure relate to the synthesized netlist, and is it worth applying the suggested delay optimization given the current critical path? Please summarize the structure, current timing/area/power, and expected trade-offs.
[graph_extractor {"graph_type": "CDF... | dfbc3713e823 | 40e911238939 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9467/axi_ad9467_channel.v",
"sha256": "2e26bcfb5ee359610a34e93898d394800e38f3eb5f18bb5eca0f1a6d9300002c"
} |
For the oh_clockmux2 module, how does the recommended area optimization trade off against other metrics, and how complex is the module given its source code structure? | The area-focused optimization for oh_clockmux2 is estimated to improve area by -15.0 and power by -10.0, but at the cost of a 5.0 delay penalty, with warnings that area optimization may increase delay and aggressive sharing increases routing complexity. The module itself is fairly small, with 31 lines of code, a cyclom... | github_repos/aolofsson_oh/stdlib/rtl/oh_clockmux2.v | oh_clockmux2 | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top oh_clockmux2 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | 375090aef9d3 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the oh_clockmux2 module, how does the recommended area optimization trade off against other metrics, and how complex is the module given its source code structure?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -t... | 8abff007a098 | 413f2d24a0b9 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_clockmux2.v",
"sha256": "ebf31aaf53953f19271f9ddbc83f40cc011f741ecf4800fb2c415c2297e57dc1"
} |
For test_axis_crosspoint_4x4, I'm considering applying the suggested area optimization recipes like aggressive resource sharing — given the module's size and complexity, is it worth it, and what are the trade-offs? | The area optimization for test_axis_crosspoint_4x4 is estimated to improve area by -15.0 and power by -10.0, at the cost of a 5.0 increase in delay and higher routing complexity from aggressive sharing. Since the module is fairly small — 113 lines of code, cyclomatic complexity of 2, nesting depth of 1, and 81 operator... | github_repos/corundum_corundum/fpga/lib/eth/lib/axis/tb/test_axis_crosspoint_4x4.v | test_axis_crosspoint_4x4 | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top test_axis_crosspoint_4x4 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions":... | multi_tool | optimization_advisor+static_analyzer | compositional | 45890ef36cdb | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For test_axis_crosspoint_4x4, I'm considering applying the suggested area optimization recipes like aggressive resource sharing — given the module's size and complexity, is it worth it, and what are the trade-offs?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "... | a36f11297f89 | 41386311b2ee | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/lib/axis/tb/test_axis_crosspoint_4x4.v",
"sha256": "d230eb5d84341c62ddca9ff18df1c0c9bd84c30650559c920ff976682eec2340"
} |
For the twelve_four_comp module, the RTL-to-netlist mapping shows a 100.0 alignment score, and the area-focused optimization advisor recommends resource sharing; can you summarize how good the mapping is, what optimization it suggests, and what the estimated area, delay, and power impacts would be? | The mapping for twelve_four_comp is clean: alignment_score is 100.0 with 3 rtl_signals and 4 netlist_wires all mapped and 0 unmapped signals. The area optimization recommends resource sharing of arithmetic operators via 'share -aggressive', with estimated improvement of -15.0 for area, 5.0 for delay, and -10.0 for powe... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/twelve_four_comp.v | twelve_four_comp | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"sum": [
"sum_b",
"sum",
"sum_a"
],
"sum_a": [
"sum_a"
],
"data": [
"data"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 3,
... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | ef514f3f9baf | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the twelve_four_comp module, the RTL-to-netlist mapping shows a 100.0 alignment score, and the area-focused optimization advisor recommends resource sharing; can you summarize how good the mapping is, what optimization it suggests, and what the estimated area, delay, and power impacts would be?
[cross_st... | 24e18f42b4d8 | 41491b129059 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arithmetic/twelve_four_comp.v",
"sha256": "fcfd9aa201974676d7d287f8e6ad5ffa4cf963922bc01754fa3b201ac7d1982f"
} |
For the ct_prio module, how do the control/dataflow operations seen in the CDFG relate to the delay and area results after medium-level optimization, and do the sequential elements you'd expect from the CDFG show up in the synthesized cell mix? | The CDFG of ct_prio contains 24 nodes and 91 edges with 5 $and, 3 $reduce_or, 2 $eq, 2 $mux, and 2 $adffe nodes, which corresponds well with the synthesized design of 17 gates and area 19.0. The 2 $adffe nodes in the CDFG appear in the netlist as 4 flip-flops ($_DFFE_PN0P_ x3 and $_DFFE_PN1P_ x1), while the combination... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_prio.v | ct_prio | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[16750 chars elided]...
"node_count": 24,
"edge_count": 91,
"graph_properties": {
"node_types": {
"$and": 5,
"$reduce_or": 3,
"$eq": 2,
"$mux": 2,
"$not": 1,
"$logic_and": 2,
... | multi_tool | graph_extractor+synthesis_tool | compositional | 2e2f42be3879 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the ct_prio module, how do the control/dataflow operations seen in the CDFG relate to the delay and area results after medium-level optimization, and do the sequential elements you'd expect from the CDFG show up in the synthesized cell mix?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success"... | fa39c9be3204 | 4182704597bf | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_prio.v",
"sha256": "2cd7d0e3350c6e4e3df90953570ed95915d6b38e3398ede956df0be321eb6865"
} |
For module upack_tb, given its complexity metrics and the estimated impact of applying the recommended area optimizations, is aggressive optimization worthwhile, and what should I watch out for? | upack_tb is fairly complex, with 7 always blocks, a cyclomatic complexity of 29, nesting depth of 28, and 543 operators, but it has no ports and only 4 signals, so aggressive recipes like share -aggressive and muxcover are the main lever for area. The estimated improvement is -15.0 percent in area and -10.0 percent in ... | github_repos/analogdevicesinc_hdl/library/util_pack/tb/upack_tb.v | upack_tb | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top upack_tb -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"... | multi_tool | optimization_advisor+static_analyzer | compositional | 807a5155b13b | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For module upack_tb, given its complexity metrics and the estimated impact of applying the recommended area optimizations, is aggressive optimization worthwhile, and what should I watch out for?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommende... | 7a14eea382a1 | 41fd32722032 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_pack/tb/upack_tb.v",
"sha256": "1f88feb59a6a0d9d78afed03be65f48550829adb3540462ae5c2775d498a0bbb"
} |
For the ecc_encode_16bit module, how well did the RTL signals survive into the netlist mapping, given the module's declared signal counts and complexity? Give a short summary using the RTL signal count, the mapping statistics, and the cyclomatic complexity. | The RTL for ecc_encode_16bit declares 25 total signals (20 wires, 5 regs) with a cyclomatic complexity of 37, but only 8 of the 24 signals considered in mapping were mapped to netlist wires, leaving 16 unmapped and an alignment score of 33.33. The netlist contains 39 wires but 0 cells, so roughly two-thirds of the RTL ... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ecc/ecc_matrix_16bit.v | ecc_encode_16bit | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"help_s1": [],
"err_flip": [],
"clk": [],
"help_c21": [
"help_c21"
],
"help_c0": [
"help_c0"
],
"help_s4": [],
"no_err": [],
"register": [],
"help_s5": [],
"c": [
"help_c21",
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 08563f3762a2 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ecc_encode_16bit module, how well did the RTL signals survive into the netlist mapping, given the module's declared signal counts and complexity? Give a short summary using the RTL signal count, the mapping statistics, and the cyclomatic complexity.
[cross_stage_mapper {}]
{
"status": "success",
... | 78fe646f450f | 420d91dcfdfa | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ecc/ecc_matrix_16bit.v",
"sha256": "33a114ec3759b79265c9fcdf947de3dbbcacbc562ee6c618be3b1c4d5602b297"
} |
For the less_than_const module, I'd like a quick summary weighing whether the power optimization plan makes sense given the module's structure: what power improvement is estimated, what trade-offs should I watch for, and how do the code complexity numbers (cyclomatic complexity, nesting depth, operator count) factor in... | The power optimization plan for less_than_const suggests clock gating and operand isolation with an estimated power improvement of -25.0, at the cost of possible area overhead and added timing complexity from clock gating. Given the static analysis, the module is purely combinational with 0 always blocks, 13 assign sta... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/compare/less_than_const.v | less_than_const | optimization_advisor+static_analyzer | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top less_than_const",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "clock_... | multi_tool | optimization_advisor+static_analyzer | compositional | b8ad14fdf0a9 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the less_than_const module, I'd like a quick summary weighing whether the power optimization plan makes sense given the module's structure: what power improvement is estimated, what trade-offs should I watch for, and how do the code complexity numbers (cyclomatic complexity, nesting depth, operator count)... | bee86e6e067a | 41fd645e13ef | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/compare/less_than_const.v",
"sha256": "8f5bd486cfa775090ca3319ef385605aabfb714c7afd5ac28a522be22d26910e"
} |
For example_core_pcie, how does the DFG structure compare with its code-level statistics — specifically, do the node types in the dataflow graph match the module's port and complexity profile? | The DFG for example_core_pcie has 78 nodes and 11766 edges with an average degree of 150.85, and its node types include 6 $logic_and nodes, 32 port_input and 29 port_output nodes, plus instances like axi_ram, example_core, dma_if_pcie, and 2 pcie_axil_master blocks. This matches the code analysis, which reports exactly... | github_repos/corundum_corundum/fpga/lib/pcie/example/common/rtl/example_core_pcie.v | example_core_pcie | graph_extractor+static_analyzer | [
{
"graph_type": "DFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[62776 chars elided]...
"node_count": 78,
"edge_count": 11766,
"graph_properties": {
"node_types": {
"$logic_and": 6,
"axi_ram": 1,
"example_core": 1,
"dma_if_pcie": 1,
"pcie_axil_master": ... | multi_tool | graph_extractor+static_analyzer | compositional | 3edea9128ea7 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For example_core_pcie, how does the DFG structure compare with its code-level statistics — specifically, do the node types in the dataflow graph match the module's port and complexity profile?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[62776 chars elided]...
... | 561ba826adcf | 42d818bf6dba | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/common/rtl/example_core_pcie.v",
"sha256": "34e62561df75230ed56e05a3ce40b1c70f48f7d666967062cdf7f923c646c77b"
} |
For the bmc_spi module, how does its source-level complexity compare with its synthesized size, and do any lint issues suggest synthesis problems? | The bmc_spi module has 203 lines of code with cyclomatic complexity 31 and nesting depth 25, and it synthesizes to 690 gates with an area of 1184.5, a delay of 456.98, and power of 0.69. The static analysis reported no lint warnings, so there are no source-level issues that would explain its relatively high complexity ... | github_repos/corundum_corundum/fpga/mqnic/fb4CGg3/fpga_100g/rtl/bmc_spi.v | bmc_spi | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "bmc_spi",
"port_count": {
"inputs": 7,
"outputs": 7,
"inouts": 0,
"total": 14
},
"signal_count": {
"wires": 14,
"regs": 15,
"parameters": 5,
"total": 29
},
"always_blocks": 2,
"assign_state... | multi_tool | static_analyzer+synthesis_tool | compositional | 7625563cac54 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the bmc_spi module, how does its source-level complexity compare with its synthesized size, and do any lint issues suggest synthesis problems?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "bmc_spi",
"port_count": {
"inputs": 7,
"outputs": 7,
"inouts"... | 278b745b3b9d | 42d9bc315311 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/mqnic/fb4CGg3/fpga_100g/rtl/bmc_spi.v",
"sha256": "e5f068feec8a6d7c82d6fb977e7caf308811e311ea9e618ee701849e520754c5"
} |
For the axi_adrv9001_if module, how does its source-level complexity compare with its post-synthesis implementation, i.e., what do the static analysis results and the synthesis area/power/delay results together tell you about the design? | The axi_adrv9001_if source is fairly structural, with 445 lines of code, cyclomatic complexity 18, nesting depth 14, 46 assign statements, 0 always blocks, and 85 ports (53 inputs, 32 outputs). After synthesis, it maps to just 8 cells (2 each of adrv9001_rx, adrv9001_rx_link, adrv9001_tx, adrv9001_tx_link) with area 8.... | github_repos/analogdevicesinc_hdl/library/axi_adrv9001/axi_adrv9001_if.v | axi_adrv9001_if | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "axi_adrv9001_if",
"port_count": {
"inputs": 53,
"outputs": 32,
"inouts": 0,
"total": 85
},
"signal_count": {
"wires": 36,
"regs": 0,
"parameters": 17,
"total": 36
},
"always_blocks": 0,
"as... | multi_tool | static_analyzer+synthesis_tool | compositional | d5aeb0cb0ed2 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_adrv9001_if module, how does its source-level complexity compare with its post-synthesis implementation, i.e., what do the static analysis results and the synthesis area/power/delay results together tell you about the design?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
... | 7bd0deff8d58 | 430b20a23dcd | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_adrv9001/axi_adrv9001_if.v",
"sha256": "8936e4f643887f1622424e17c2c33cf804c9122916f5b02415d1a6165bb495a3"
} |
For the oh_lat1 module, how does the structure shown in its CDFG compare with its overall code complexity, and does anything suggest the implementation is more elaborate than its function requires? | The CDFG of oh_lat1 shows just 4 nodes and 3 edges, consisting of a single 1-bit $dlatch driven by input ports clk and in and driving output port out, matching the 2 inputs and 1 output reported by static analysis. Yet the source has a cyclomatic complexity of 5, a nesting depth of 3, 46 operators, and 27 lines of code... | github_repos/aolofsson_oh/stdlib/rtl/oh_lat1.v | oh_lat1 | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
"node_count": 4,
"edge_count": 3,
"graph_properties": {
"node_types": {
"$dlatch": 1,
"port_input": 2,
"port_output": 1
},
"avg_degree": 0.75,
"module_name": "oh_lat1"
},
"error": null
}... | multi_tool | graph_extractor+static_analyzer | compositional | 36be3c0bf1fb | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the oh_lat1 module, how does the structure shown in its CDFG compare with its overall code complexity, and does anything suggest the implementation is more elaborate than its function requires?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
"node_count": 4,
... | 167e7d0062c0 | 42d5d446e046 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_lat1.v",
"sha256": "8fbbd594bd587fc3489a8888f4fcc40a8cfb6d0ff209a83a65e7dd0f0a9dfa49"
} |
For eth_xcvr_phy_quad_wrapper, what power optimizations are recommended, how much power improvement is estimated, and how does the module's structure (ports, signals, instantiations) relate to those suggestions? | The recommended power optimizations for eth_xcvr_phy_quad_wrapper are clock gating for registers and operand isolation, with an estimated power improvement of -25.0 (at the cost of possible area and timing overhead). The module has 76 total ports (21 inputs, 55 outputs), 59 wires, 10 parameters, and a single instantiat... | github_repos/corundum_corundum/fpga/lib/eth/example/ZCU102/fpga/rtl/eth_xcvr_phy_quad_wrapper.v | eth_xcvr_phy_quad_wrapper | optimization_advisor+static_analyzer | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top eth_xcvr_phy_quad_wrapper",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type... | multi_tool | optimization_advisor+static_analyzer | compositional | 776f39484841 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For eth_xcvr_phy_quad_wrapper, what power optimizations are recommended, how much power improvement is estimated, and how does the module's structure (ports, signals, instantiations) relate to those suggestions?
[optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "po... | 62dbd538c868 | 434637c8e9e1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/ZCU102/fpga/rtl/eth_xcvr_phy_quad_wrapper.v",
"sha256": "0d6dce07b6a8fe51a55c4e9cb9100bbc0e307c0f56f77475a3e9d7a7e4c93b22"
} |
For eth_mac_phy_10g, how well do the RTL and synthesized netlist correspond, and does the port and signal inventory support that? Also, what delay should I expect after synthesis? | The RTL-to-netlist mapping is excellent with an alignment score of 96.43, mapping 27 of 28 RTL signals (only 'wire' unmapped), which is consistent with the static analysis showing 41 total ports (18 inputs, 23 outputs) and 27 wires, matching the 41 netlist wires found during synthesis. Synthesis produced just 2 cells (... | github_repos/corundum_corundum/fpga/lib/eth/rtl/eth_mac_phy_10g.v | eth_mac_phy_10g | cross_stage_mapper+static_analyzer+synthesis_tool | [
{},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"tx_start_packet": [
"tx_start_packet"
],
"rx_error_bad_fcs": [
"rx_error_bad_fcs"
],
"rx_error_bad_frame": [
"rx_error_bad_frame"
],
"cfg_rx_enable": [
"cfg_rx_enable"
],
...[882 c... | multi_tool | cross_stage_mapper+static_analyzer+synthesis_tool | compositional | 50fe3134abd9 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For eth_mac_phy_10g, how well do the RTL and synthesized netlist correspond, and does the port and signal inventory support that? Also, what delay should I expect after synthesis?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"tx_start_packet": [
"tx_start_packet"
... | dbf0c91a9420 | 437868e3cf23 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/eth_mac_phy_10g.v",
"sha256": "e204853d1e23643e608f08d3084a5ae6064b617872119ec40a88949e00b4a1f8"
} |
For the ad_data_out module, given the delay-focused optimization analysis and the synthesis results, how much delay improvement could the suggested optimizations bring, and what would that mean relative to the current synthesized critical path and area trade-off? | The current synthesis of ad_data_out reports a critical path estimate of 50.0 with an area of 1.0 and power of 0.001. The delay optimization advisor estimates a delay improvement of -20.0 at the cost of 10.0 more area and 5.0 more power, so pipelining the arithmetic operations or duplicating logic to reduce fanout woul... | github_repos/analogdevicesinc_hdl/library/xilinx/common/ad_data_out.v | ad_data_out | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top ad_data_out",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"de... | multi_tool | optimization_advisor+synthesis_tool | compositional | de0ab09a645b | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the ad_data_out module, given the delay-focused optimization analysis and the synthesis results, how much delay improvement could the suggested optimizations bring, and what would that mean relative to the current synthesized critical path and area trade-off?
[optimization_advisor {"target_metric": "dela... | 784fe5e723c2 | 43dd7b49ee2e | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/xilinx/common/ad_data_out.v",
"sha256": "1ff65adb8fecb3e11a2b916fad69007571dff0d13e74a5a8a46c53a805738042"
} |
For the test_axis_rate_limit module, given its size and complexity, is aggressive resource sharing of arithmetic operators a worthwhile area optimization, and what are the trade-offs and expected impacts? | The area optimization recipe (including share -aggressive) is estimated to cut area by -15.0 and power by -10.0, but at the cost of a 5.0 delay increase and greater routing complexity. Since test_axis_rate_limit is a fairly small module — 121 lines of code, cyclomatic complexity 2, 9 regs, 3 wires, and 66 operators — t... | github_repos/alexforencich_verilog-ethernet/lib/axis/tb/test_axis_rate_limit.v | test_axis_rate_limit | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top test_axis_rate_limit -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
... | multi_tool | optimization_advisor+static_analyzer | compositional | 5b0b6bab3556 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the test_axis_rate_limit module, given its size and complexity, is aggressive resource sharing of arithmetic operators a worthwhile area optimization, and what are the trade-offs and expected impacts?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"... | bd2a43f569d7 | 4404e03e676a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "lib/axis/tb/test_axis_rate_limit.v",
"sha256": "3f8918ce45ac37ed047f4d94b334e378b61f5f697c7d2579ef99162b8bda5aa2"
} |
For the asic_sdffq module, how does the RTL-to-netlist signal mapping coverage relate to the module's declared ports and internal signals, and which elements remain unmapped? | The asic_sdffq module declares 4 inputs and 1 output (5 ports total) with 1 reg, and the mapping achieved an alignment score of 66.67 by mapping 4 of 6 RTL signals. The unmapped elements are 'reg' and 'q', which correspond to the module's single registered element and its output port. | github_repos/aolofsson_oh/asiclib/hdl/asic_sdffq.v | asic_sdffq | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"reg": [],
"clk": [
"clk"
],
"q": [],
"d": [
"d"
],
"si": [
"si"
],
"se": [
"se"
]
},
"alignment_score": 66.67,
"unmapped_elements": [
"reg",
"q"
],
"mapping_s... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 2d9cd260f153 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the asic_sdffq module, how does the RTL-to-netlist signal mapping coverage relate to the module's declared ports and internal signals, and which elements remain unmapped?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"reg": [],
"clk": [
"clk"
],
"q":... | 36c9ad6417ed | 4437322f62c1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_sdffq.v",
"sha256": "41e18f423c06be0e90565baf5bdf2ddcc98473a6b5478145ac3a864ca5299850"
} |
For the module tim4_sec_top, how well did the RTL signals survive into the netlist, and how does that compare with the module's overall structure and complexity? | The RTL-to-netlist mapping for tim4_sec_top achieved a 100.0 alignment score with all 21 RTL signals mapped and 0 unmapped, covering 26 netlist wires. This clean mapping is consistent with the module's simple structure: 31 total ports (25 inputs, 6 outputs), 36 wires, 0 always blocks, just 3 assign statements, cyclomat... | github_repos/XUANTIE-RV_wujian100_open/soc/tim4.v | tim4_sec_top | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"tipc_tim4_trust": [
"tipc_tim4_trust"
],
"pwrite": [
"pwrite",
"i_pwrite"
],
"paddr": [
"paddr"
],
"tim2_etb_trig": [
"tim2_etb_trig"
],
"presetn": [
"presetn"
],
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 7042430e98b4 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module tim4_sec_top, how well did the RTL signals survive into the netlist, and how does that compare with the module's overall structure and complexity?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"tipc_tim4_trust": [
"tipc_tim4_trust"
],
"pwrite"... | 53d72b6c737a | 4449d8c9f537 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/tim4.v",
"sha256": "f4043175a345c7723c32e52b0896c8dc1d738879487cf6fb2a60be06ca34e7ef"
} |
For aou_top, how large is its CDFG structure, and given that I want to reduce area, what optimization is recommended and what delay penalty should I expect? | The CDFG of aou_top has 134 nodes and 629 edges with an average degree of 4.69, dominated by 114 port_output nodes and 16 port_input nodes. The area-focused optimization recommends resource sharing (share -aggressive) to share arithmetic operators, with an estimated area improvement of -15.0 but a delay increase of 5.0... | github_repos/XUANTIE-RV_wujian100_open/soc/aou_top.v | aou_top | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[34094 chars elided]...
"node_count": 134,
"edge_count": 629,
"graph_properties": {
"node_types": {
"$not": 1,
"gpio0_sec_top": 1,
"pmu_dummy_top": 1,
"rtc0_sec_top": 1,
"port_input": 16,... | multi_tool | graph_extractor+optimization_advisor | compositional | 71035500a76f | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For aou_top, how large is its CDFG structure, and given that I want to reduce area, what optimization is recommended and what delay penalty should I expect?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[34094 chars elided]...
"node_count": 134,
"edge_count"... | afafcdcc85ca | 443f4c411c98 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/aou_top.v",
"sha256": "d74f9efde7e119ac6460946d273f13e88cf20b3135aba9ada6027748f0574ee0"
} |
For the ssio_sdr_in module, how well did the RTL signals map to the netlist, and given that mapping quality, is it worth applying the area optimization recommendations, considering their impact on delay and power? | The cross-stage mapping achieved an alignment score of 57.14, with 4 of 7 RTL signals mapped (3 unmapped, and 6 netlist wires with 0 netlist cells). Applying the recommended area optimization recipes, such as 'synth -top ssio_sdr_in -flatten' and 'share -aggressive', is estimated to improve area by -15.0 and power by -... | github_repos/corundum_corundum/fpga/lib/eth/rtl/ssio_sdr_in.v | ssio_sdr_in | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"style": [],
"wire": [],
"clk_io": [
"clk_io"
],
"clk_int": [
"clk_int"
],
"output_clk": [
"output_clk"
],
"buffers": [],
"input_clk": [
"input_clk"
]
},
"alignment_scor... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | d2e303ba457a | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the ssio_sdr_in module, how well did the RTL signals map to the netlist, and given that mapping quality, is it worth applying the area optimization recommendations, considering their impact on delay and power?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"style": [],... | b98140e2303b | 4492e0513da1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/ssio_sdr_in.v",
"sha256": "b71edd7c90d19ebe30850f20ef8e781d74e1233ab4b01bc613d652d853d88d2b"
} |
For the bin_to_dec module, after synthesis with medium optimization, do all of the original RTL digit signals survive into the netlist, and what do the area, delay, and gate count look like for the resulting design? | All 147 RTL signals in bin_to_dec mapped successfully to the netlist with an alignment score of 100.0 and no unmapped signals, though the netlist expanded to 3259 wires. The synthesized design has an area of 1790.5, a delay of 429.68, a power of 1.676, and 1676 gates, dominated by 786 NAND and 408 AND cells plus 4 bcd_... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/translation/bin_to_dec.v | bin_to_dec | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"p8_dig_4_bit_0": [
"p8_dig_4_bit_0"
],
"p8_dig_3_bit_1": [
"p8_dig_3_bit_1"
],
"p2_dig_1_bit_0": [
"p2_dig_1_bit_0"
],
"p26_dig_7_bit_1": [
"p26_dig_7_bit_1"
],
"p20_dig_6_bit_0": ... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | 824dd45e744b | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the bin_to_dec module, after synthesis with medium optimization, do all of the original RTL digit signals survive into the netlist, and what do the area, delay, and gate count look like for the resulting design?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"p8_dig_4_... | d7e9082103ca | 451063bcb183 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/translation/bin_to_dec.v",
"sha256": "671070a340478cf6f069f65b3dffb180ab45caddf5b3b2f66c7b668a8bfdae30"
} |
For the crc32_dat32 module, how well did the RTL signals carry over to the netlist, and if I take the delay-oriented optimization advice, what changes in area, delay, and power should I expect? | The RTL-to-netlist mapping for crc32_dat32 was perfect, with an alignment score of 100.0 and all 7 RTL signals mapped with 0 unmapped, out of 175 netlist wires. Following the delay-targeted optimization recipes (e.g., synth -top crc32_dat32, opt -fast, abc -fast -liberty stdcells.lib, opt_clean) is estimated to improve... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc32_dat32.v | crc32_dat32 | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "delay"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
],
"x631": [
"x631"
],
"crc_in": [
"crc_in"
],
"d0": [
"d0"
],
"crc_out": [
"crc_out"
],
"c0": [
"c0"
],
"x31": [
"x31"
]
... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | 302fd10b0ca8 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the crc32_dat32 module, how well did the RTL signals carry over to the netlist, and if I take the delay-oriented optimization advice, what changes in area, delay, and power should I expect?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
]... | e1dbecf96170 | 44cb39d9b26c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc32_dat32.v",
"sha256": "7ffa2a2d2b79754c6f6f07d9114f5be5543e838bacdb97873e392f2fe9ff2871"
} |
For ad_iobuf, given its static analysis results and the cross-check of RTL signals against the netlist, does the mapping make sense — the netlist has 7 wires but no RTL signals were mapped? | Yes, it's consistent: the static analysis of ad_iobuf reports 0 wires, 0 regs, and 0 ports in the RTL, and 2 assign statements, while the cross-stage check found 7 netlist wires but 0 RTL signals and 0 mapped signals, giving an alignment score of 0.0 with no unmapped elements flagged as errors. | github_repos/analogdevicesinc_hdl/library/common/ad_iobuf.v | ad_iobuf | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 0,
"netlist_wires": 7,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 0
},
"error": null
}
[static_analyze... | multi_tool | cross_stage_mapper+static_analyzer | compositional | ad029a60802b | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For ad_iobuf, given its static analysis results and the cross-check of RTL signals against the netlist, does the mapping make sense — the netlist has 7 wires but no RTL signals were mapped?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_... | 46402d347aa7 | 454dcd3f5397 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_iobuf.v",
"sha256": "ab5899d451dd8f1690e6efa4a3161eb3f5b62cafa31fc685d6ead1b4cc254cea"
} |
For the ct_fifo module, the RTL-to-netlist mapping shows a perfect alignment score while the area-focused optimization report suggests applying aggressive resource sharing—how do these two results together support moving forward with the area optimization, and what trade-offs should I expect? | The ct_fifo mapping shows an alignment score of 100.0 with all 13 RTL signals mapped and 0 unmapped, so the netlist is fully traceable and safe to transform. The area optimization is estimated to improve area by -15.0 and power by -10.0, but at the cost of a 5.0 delay increase, and aggressive sharing may increase routi... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_fifo.v | ct_fifo | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"fifo_not_empty": [
"fifo_not_empty"
],
"fifo_pop_en": [
"fifo_pop_en"
],
"clk": [
"ctrl_clk_en",
"ctrl_clk",
"clk",
"entry_clk"
],
"fifo_empty": [
"fifo_empty"
],
... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | 9cd5f2d4b7a5 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the ct_fifo module, the RTL-to-netlist mapping shows a perfect alignment score while the area-focused optimization report suggests applying aggressive resource sharing—how do these two results together support moving forward with the area optimization, and what trade-offs should I expect?
[cross_stage_ma... | 2ce2af0da827 | 458ecaa8ebdd | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_fifo.v",
"sha256": "59f387c64e92b25fa90abd549d7cae7fa1440d4927be080ea698e5e9aece3301"
} |
For the scale_up module, the RTL-to-netlist cross-stage mapping shows one unmapped signal, so can you summarize the module's structure from the static analysis and explain whether the mapping failure is consistent with what the source-level analysis reports? | The scale_up module has 1 unmapped signal (shift_desired) out of 1 RTL signal, an alignment score of 0.0, and 188 netlist wires with 0 netlist cells mapped. This is consistent with the static analysis, which reports 0 ports, 1 wire, 0 regs, 0 always blocks, and 7 assign statements across 25 lines of code, indicating th... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/float/scale_up.v | scale_up | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"shift_desired": []
},
"alignment_score": 0.0,
"unmapped_elements": [
"shift_desired"
],
"mapping_statistics": {
"rtl_signals": 1,
"netlist_wires": 188,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped... | multi_tool | cross_stage_mapper+static_analyzer | compositional | b289cfc685bd | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the scale_up module, the RTL-to-netlist cross-stage mapping shows one unmapped signal, so can you summarize the module's structure from the static analysis and explain whether the mapping failure is consistent with what the source-level analysis reports?
[cross_stage_mapper {}]
{
"status": "success",
... | 78d432d8ff66 | 463e5bff0125 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/float/scale_up.v",
"sha256": "131f12b13e3f56898845c39bef54b0b2ca8f0c357040b58ba315eecca8b01689"
} |
For the rgmii_phy_if module, is the delay optimization worth it when you take its estimated impact together with the module's complexity and structure? Please summarize the expected delay, area, and power changes, and relate them to the module's size (lines of code, cyclomatic complexity, and port/signal counts). | The delay optimization for rgmii_phy_if is estimated to reduce delay by -20.0 at the cost of a 10.0 area increase and 5.0 higher power, with the trade-offs of increased area and power consumption. Given that the module is fairly large and complex, with 204 lines of code, cyclomatic complexity 29, 22 total ports (11 inp... | github_repos/alexforencich_verilog-ethernet/rtl/rgmii_phy_if.v | rgmii_phy_if | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top rgmii_phy_if",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"d... | multi_tool | optimization_advisor+static_analyzer | compositional | 1d8dcc769502 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the rgmii_phy_if module, is the delay optimization worth it when you take its estimated impact together with the module's complexity and structure? Please summarize the expected delay, area, and power changes, and relate them to the module's size (lines of code, cyclomatic complexity, and port/signal coun... | 67c0955b1531 | 46959f6fd427 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/rgmii_phy_if.v",
"sha256": "3ca6c38f17934a1a305345db93536739e5a482f3283a9fa7498c1fa747e8539a"
} |
For the MUXCY module, how does its AIG structure size compare with what you'd gain by applying the area-focused optimization recommendations, and is the trade-off worth it? | MUXCY's AIG has 11 nodes and 17 edges, with node types of 3 $_AND_, 4 $_NOT_, 1 port_output and 3 port_input, so it is a small graph. The area optimization (including aggressive resource sharing via 'share -aggressive') is estimated to improve area by -15.0 and power by -10.0, at the cost of a 5.0 delay increase, with ... | github_repos/pConst_basic_verilog/pacoblaze-2.2/xilinx/unisims/MUXCY.v | MUXCY | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[2039 chars elided]...
"node_count": 11,
"edge_count": 17,
"graph_properties": {
"node_types": {
"$_AND_": 3,
"$_NOT_": 4,
"port_output": 1,
"port_input": 3
},
"avg_degree": 1.55,
"mo... | multi_tool | graph_extractor+optimization_advisor | compositional | 7e24b98f50ef | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the MUXCY module, how does its AIG structure size compare with what you'd gain by applying the area-focused optimization recommendations, and is the trade-off worth it?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[2039 chars elided]...
"node_count": 11,
... | 8cfcd302b5ab | 46c8706613c1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/xilinx/unisims/MUXCY.v",
"sha256": "dc222df376b1eac4d187dc6fc8ea3ad7b7e8943c95a41ca6e19907946885998b"
} |
For gpio_apbif, how would you weigh the recommended area reduction against its impact on delay and routing, considering the module's control structure from its CDFG? | The CDFG of gpio_apbif has 87 nodes and 1615 edges, with 33 $mux and 1 $pmux nodes plus 8 $adffe elements, indicating mux-heavy control logic. The area optimization (with suggestions like mux sharing via muxcover and aggressive resource sharing) estimates an area improvement of -15.0 and power of -10.0, but at the cost... | github_repos/XUANTIE-RV_openc910/smart_run/logical/gpio/gpio_apbif.v | gpio_apbif | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[49360 chars elided]...
"node_count": 87,
"edge_count": 1615,
"graph_properties": {
"node_types": {
"$logic_and": 4,
"$eq": 10,
"$reduce_and": 8,
"$not": 2,
"$adffe": 8,
"$mux": 33,... | multi_tool | graph_extractor+optimization_advisor | compositional | 385eb9607285 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For gpio_apbif, how would you weigh the recommended area reduction against its impact on delay and routing, considering the module's control structure from its CDFG?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[49360 chars elided]...
"node_count": 87,
"edg... | d2b79b5846da | 465727a87cd1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "smart_run/logical/gpio/gpio_apbif.v",
"sha256": "30b196dec4f3f321c431cde60324f5fa43f5a020029962251263287169c03955"
} |
For the axi_write_slave module, how do the RTL-to-netlist signal mapping results relate to the structure shown in its DFG analysis — specifically, which signals failed to map, how much of the RTL mapped successfully, and what does the DFG say about the module's size and operator mix? | The RTL-to-netlist mapping for axi_write_slave achieved an alignment score of 86.96 with 20 of 23 RTL signals mapped, leaving reg, bvalid, and failed unmapped. Its DFG contains 31 nodes and 155 edges with an average degree of 5.0, including operators such as 3 $and nodes plus one each of $add, $sub, $not, $logic_or, $r... | github_repos/analogdevicesinc_hdl/library/axi_dmac/tb/axi_write_slave.v | axi_write_slave | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"resp_count_inc": [
"resp_count_inc"
],
"awcache": [
"awcache"
],
"clk": [
"clk"
],
"wlast": [
"wlast"
],
"awready": [
"awready"
],
"resp_count_next": [
"resp_co... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 78bd2c51cfa3 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For the axi_write_slave module, how do the RTL-to-netlist signal mapping results relate to the structure shown in its DFG analysis — specifically, which signals failed to map, how much of the RTL mapped successfully, and what does the DFG say about the module's size and operator mix?
[cross_stage_mapper {}]
... | 0fb95630fb63 | 46cb263fa815 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_dmac/tb/axi_write_slave.v",
"sha256": "af4cb3ecedc8430e7373e998b6294adb691721ab52235da6da637734366c765a"
} |
For the system_top module, how does the structure reported by static analysis (assign statements, instantiations, complexity) relate to the synthesized results (gate count, cell breakdown, delay and power), and does anything indicate a mismatch worth checking? | The static analysis shows system_top is purely structural with 18 assign statements, 0 always blocks, cyclomatic complexity 1, and instantiations including system_wrapper, IBUFDS_GTE4, IBUFDS, OBUFDS and daq2_spi across 141 lines of code, which matches synthesis exactly: 9 cells broken down as 4 IBUFDS, 2 IBUFDS_GTE4, ... | github_repos/analogdevicesinc_hdl/projects/daq2/zcu102/system_top.v | system_top | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "system_top",
"port_count": {
"inputs": 16,
"outputs": 11,
"inouts": 1,
"total": 28
},
"signal_count": {
"wires": 11,
"regs": 0,
"parameters": 0,
"total": 11
},
"always_blocks": 0,
"assign_s... | multi_tool | static_analyzer+synthesis_tool | compositional | 7e6abe4105f2 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the system_top module, how does the structure reported by static analysis (assign statements, instantiations, complexity) relate to the synthesized results (gate count, cell breakdown, delay and power), and does anything indicate a mismatch worth checking?
[static_analyzer {"analysis_type": "full"}]
{
... | 110a97bb95e0 | 46f78c49f2ef | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/daq2/zcu102/system_top.v",
"sha256": "665758d98d5780003504859607c1bc7e2c0833584ed88468445a7c4d8036e9fb"
} |
For system_top, how do the port counts and instantiations reported by static analysis compare with the port-type breakdown in the AIG, and does the RTL-to-netlist mapping confirm everything lines up? | Static analysis reports 28 total ports for system_top (16 inputs, 11 outputs, 1 inout) with instantiations including system_wrapper, IBUFDS_GTE4, OBUFDS, daq2_spi, and IBUFDS, which matches the AIG node types of 19 port_input, 14 port_output, 1 port_inout plus 2 IBUFDS_GTE4, 4 IBUFDS, 1 OBUFDS, 1 daq2_spi, and 1 system... | github_repos/analogdevicesinc_hdl/projects/daq2/zcu102/system_top.v | system_top | cross_stage_mapper+graph_extractor+static_analyzer | [
{},
{
"graph_type": "AIG"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rx_ref_clk": [
"rx_ref_clk",
"rx_ref_clk_p",
"rx_ref_clk_n"
],
"tx_ref_clk": [
"tx_ref_clk",
"tx_ref_clk_p",
"tx_ref_clk_n"
],
"rx_sync_p": [
"rx_sync_p"
],
"tx
...[1360 ... | multi_tool | cross_stage_mapper+graph_extractor+static_analyzer | compositional | f7fa967cf26e | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For system_top, how do the port counts and instantiations reported by static analysis compare with the port-type breakdown in the AIG, and does the RTL-to-netlist mapping confirm everything lines up?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rx_ref_clk": [
"rx_... | 4e5217e9bc91 | 46f78c49f2ef | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/daq2/zcu102/system_top.v",
"sha256": "665758d98d5780003504859607c1bc7e2c0833584ed88468445a7c4d8036e9fb"
} |
For util_fir_dec, how does its structural complexity in the CDFG compare with its code-level complexity, and what are the resulting delay and power after synthesis? | The CDFG of util_fir_dec has 11 nodes and 169 edges with an average degree of 15.36, while the source code is simple with 25 lines of code, cyclomatic complexity 1, and 395 operators. After synthesis at a medium optimization level targeting delay, the design has a critical path delay of 184.75 and power of 0.096, using... | github_repos/analogdevicesinc_hdl/library/util_fir_dec/util_fir_dec.v | util_fir_dec | graph_extractor+static_analyzer+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[19016 chars elided]...
"node_count": 11,
"edge_count": 169,
"graph_properties": {
"node_types": {
"$mux": 2,
"fir_decim": 1,
"port_input": 5,
"port_output": 3
},
"avg_degree": 15.36,
... | multi_tool | graph_extractor+static_analyzer+synthesis_tool | compositional | 4c50747ae09c | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For util_fir_dec, how does its structural complexity in the CDFG compare with its code-level complexity, and what are the resulting delay and power after synthesis?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[19016 chars elided]...
"node_count": 11,
"edge... | 6eabfa0a9907 | 47be882f509f | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_fir_dec/util_fir_dec.v",
"sha256": "cd02c78d755a9d7875f9bf8d3f6747799de51e35425346aa7708def9676751e2"
} |
For the gray_to_bin module, how does the XOR-chain structure seen in its CDFG relate to the synthesized gate-level results, and what do the area, delay, and power figures tell you about the cost of that structure? | The CDFG of gray_to_bin shows 9 nodes and 21 edges with 7 $xor operators chained between one input port and one output port, and synthesis maps this exactly to 7 $_XOR_ cells, giving an area of 14.0, a critical path delay of 143.42, and power of 0.007. The serialized XOR chain in the CDFG thus directly produces the rel... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/translation/gray_to_bin.v | gray_to_bin | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[4717 chars elided]...
"node_count": 9,
"edge_count": 21,
"graph_properties": {
"node_types": {
"$xor": 7,
"port_input": 1,
"port_output": 1
},
"avg_degree": 2.33,
"module_name": "gray_to... | multi_tool | graph_extractor+synthesis_tool | compositional | 9da349db6bf5 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the gray_to_bin module, how does the XOR-chain structure seen in its CDFG relate to the synthesized gate-level results, and what do the area, delay, and power figures tell you about the cost of that structure?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[4... | 9511faf4dc37 | 47af43b7c461 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/translation/gray_to_bin.v",
"sha256": "839c4e319796a335e236b3dcc0214865d03d6e12c41d55f92938bb3d12a5f798"
} |
For the pb3_ret_rom module, can you confirm that the port structure and complexity metrics are consistent with the RTL-to-netlist mapping, and summarize what this says about the design? | The pb3_ret_rom module has 3 total ports (2 inputs, 1 output) and maps all 3 RTL signals (address, clk, instruction) to the netlist with a 100.0 alignment score and 0 unmapped elements. With 0 always blocks, 0 assign statements, a single instantiation of RAMB16_S18, and cyclomatic complexity of 1 despite 165 lines of c... | github_repos/pConst_basic_verilog/pacoblaze-2.2/test/pb3_ret_rom.v | pb3_ret_rom | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"address": [
"address"
],
"clk": [
"clk"
],
"instruction": [
"instruction"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 3,
"netlist_w... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 0d75be5858c2 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the pb3_ret_rom module, can you confirm that the port structure and complexity metrics are consistent with the RTL-to-netlist mapping, and summarize what this says about the design?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"address": [
"address"
],
... | 917dea36a0e0 | 47903981b32c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/test/pb3_ret_rom.v",
"sha256": "82ce5483a619d82c7ddb810d893c547abe36f865c1cd953ccf6f48b5d5fae215"
} |
For fc_ctrl_rom, do the RTL signals, the DFG structure, and the synthesis results all agree on what the module contains, and what are the key figures from each? | Yes: the RTL-to-netlist mapping maps all 3 signals (address, clk, instruction) with an alignment score of 100.0 and 0 unmapped; the DFG for fc_ctrl_rom has 4 nodes and 50 edges with a single RAMB16_S18 plus 2 input ports and 1 output port; and synthesis reports 1 gate (a RAMB16_S18) with area 1.0, delay 50.0, and power... | github_repos/pConst_basic_verilog/pacoblaze-2.2/test/fc_ctrl_rom.v | fc_ctrl_rom | cross_stage_mapper+graph_extractor+synthesis_tool | [
{},
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"address": [
"address"
],
"clk": [
"clk"
],
"instruction": [
"instruction"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 3,
"netlist_w... | multi_tool | cross_stage_mapper+graph_extractor+synthesis_tool | compositional | 47408b6368a4 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For fc_ctrl_rom, do the RTL signals, the DFG structure, and the synthesis results all agree on what the module contains, and what are the key figures from each?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"address": [
"address"
],
"clk": [
"clk"
... | 4a88d0df7b65 | 47e197d8e396 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/test/fc_ctrl_rom.v",
"sha256": "6f8624c23012820486fdd663808a729de89171156d3c846509f57d7ee69d0333"
} |
For util_fir_dec, given that every RTL signal mapped one-to-one into the netlist with a perfect alignment score, is it still worth applying the suggested power optimizations like clock gating, and what trade-offs should I expect? | Yes: even though the RTL-to-netlist mapping for util_fir_dec is clean, with all 11 RTL signals mapped, 0 unmapped, and an alignment score of 100.0, the power-focused optimization still predicts a power reduction of -25.0 along with area and delay improvements of 5.0 each. However, clock gating adds timing complexity, a... | github_repos/analogdevicesinc_hdl/library/util_fir_dec/util_fir_dec.v | util_fir_dec | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "power"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"m_axis_data_tvalid_s": [
"m_axis_data_tvalid_s"
],
"m_axis_data_tvalid": [
"m_axis_data_tvalid",
"m_axis_data_tvalid_s"
],
"channel_0": [
"channel_0"
],
"m_axis_data_tdata_s": [
"m_a... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | 980a57249476 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For util_fir_dec, given that every RTL signal mapped one-to-one into the netlist with a perfect alignment score, is it still worth applying the suggested power optimizations like clock gating, and what trade-offs should I expect?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
... | cfeaa6ebd539 | 47be882f509f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_fir_dec/util_fir_dec.v",
"sha256": "cd02c78d755a9d7875f9bf8d3f6747799de51e35425346aa7708def9676751e2"
} |
For the mdc_mdio module, how does its control/data-flow structure (CDFG) relate to the synthesized results, and what do the numbers say about the design's size and timing? | The mdc_mdio module's CDFG has 29 nodes and 355 edges with an average degree of 12.24, dominated by sequential elements (3 $dff, 2 $dffe, 1 $sdff) and 6 $eq comparators. After medium-level optimization, this maps to 140 gates, an area of 307.0, and 83 wires (184 wire bits). The estimated critical path delay is 381.57, ... | github_repos/analogdevicesinc_hdl/library/util_gmii_to_rgmii/mdc_mdio.v | mdc_mdio | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[29375 chars elided]...
"node_count": 29,
"edge_count": 355,
"graph_properties": {
"node_types": {
"$reduce_and": 2,
"$add": 1,
"$eq": 6,
"$not": 2,
"$logic_and": 4,
"$sdff": 1,
... | multi_tool | graph_extractor+synthesis_tool | compositional | 4b7ad32b3f2d | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the mdc_mdio module, how does its control/data-flow structure (CDFG) relate to the synthesized results, and what do the numbers say about the design's size and timing?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[29375 chars elided]...
"node_count": 29,
... | 0d7511ec8ac2 | 47fdb6e867a5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_gmii_to_rgmii/mdc_mdio.v",
"sha256": "166cc349e1bf299302a428db6848de35f2d66b967b309470b463a5b5a47d9020"
} |
For the module dut, the RTL signal clkout seems to map to more than one netlist wire while everything else maps one-to-one; can you confirm the mapping is complete and give a quick summary of what dut looks like after synthesis, including its area, delay, and power figures? | Yes, the mapping is fully complete with an alignment score of 100.0 and 0 unmapped signals out of 6 RTL signals; clkout is the only signal that maps to two netlist wires (clkout90 and clkout). After synthesis, dut consists of a single oh_clockdiv cell with gate_count 1, area 1.0, delay 50.0 (critical path estimate 50.0... | github_repos/aolofsson_oh/stdlib/testbench/dut_clockdiv.v | dut | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk1": [
"clk1"
],
"dut_active": [
"dut_active"
],
"nreset": [
"nreset"
],
"vss": [
"vss"
],
"clkout": [
"clkout90",
"clkout"
],
"clk2": [
"clk2"
]
... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | 5f0fe52bcd74 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the module dut, the RTL signal clkout seems to map to more than one netlist wire while everything else maps one-to-one; can you confirm the mapping is complete and give a quick summary of what dut looks like after synthesis, including its area, delay, and power figures?
[cross_stage_mapper {}]
{
"statu... | 114174a238eb | 484841872459 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/testbench/dut_clockdiv.v",
"sha256": "a0902a62ca38b4a207a2c576baa488a8231bba53939ba20c49580129753c9e32"
} |
For crc24_zer64x2_flat, how does the XOR-heavy structure shown in its CDFG relate to the synthesized gate counts and delay, and what does that suggest about the implementation? | The CDFG of crc24_zer64x2_flat contains 252 $xor nodes among 254 total nodes with 756 edges, and synthesis maps these to 192 gates made up entirely of 151 $_XNOR_ and 41 $_XOR_ cells, giving an area of 384.0 and a critical-path delay estimate of 387.33 with power of 0.192. This confirms the module is a purely combinati... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc24_zer64x2_flat.v | crc24_zer64x2_flat | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[66495 chars elided]...
"node_count": 254,
"edge_count": 756,
"graph_properties": {
"node_types": {
"$xor": 252,
"port_input": 1,
"port_output": 1
},
"avg_degree": 2.98,
"module_name": "c... | multi_tool | graph_extractor+synthesis_tool | compositional | 5d688c8fa2a8 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For crc24_zer64x2_flat, how does the XOR-heavy structure shown in its CDFG relate to the synthesized gate counts and delay, and what does that suggest about the implementation?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[66495 chars elided]...
"node_count":... | 7816035c88e5 | 483d726aa6b8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc24_zer64x2_flat.v",
"sha256": "e3251f6b7789a0f4ebae1cf8bf568621a302901bcc47f3e1e4725e9be5188fe4"
} |
For the module fpga, how would applying the recommended area-focused optimization affect the current synthesis results, and what structural characteristics of the module motivated those recommendations? | The fpga module currently synthesizes to an area of 33.5 with a delay of 136.36 and power of 0.029, and the area optimization recipe is projected to change area by -15.0 and power by -10.0 at the cost of delay increasing by 5.0. The recommendations focus on multiplexer sharing and resource sharing of arithmetic operato... | github_repos/corundum_corundum/fpga/lib/eth/example/VCU108/fpga_10g/rtl/fpga.v | fpga | optimization_advisor+static_analyzer+synthesis_tool | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top fpga -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"type... | multi_tool | optimization_advisor+static_analyzer+synthesis_tool | compositional | 118a487dd739 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the module fpga, how would applying the recommended area-focused optimization affect the current synthesis results, and what structural characteristics of the module motivated those recommendations?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"re... | a9999bc9c4b6 | 48d54aee8f0b | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/VCU108/fpga_10g/rtl/fpga.v",
"sha256": "bd0b91b235dd1c2b088478078f24493b5bede872a7f02680274ae1226e96a917"
} |
For the jtag_io module, given that its DFG has no edges and consists only of port nodes, how worthwhile do the power optimization suggestions look, and what improvement do they estimate? | The DFG for jtag_io contains 6 nodes (4 port_input and 2 port_output) with 0 edges and average degree 0.0, so there is little internal logic to optimize; the power-targeted suggestions (clock gating via 'clockgate' and operand isolation) still estimate a power improvement of -25.0, with area and delay each at 5.0, whil... | github_repos/pConst_basic_verilog/example_projects/quartus_test_prj_template_v4/ip/jtag_io/jtag_io_bb.v | jtag_io | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[1107 chars elided]...
"node_count": 6,
"edge_count": 0,
"graph_properties": {
"node_types": {
"port_input": 4,
"port_output": 2
},
"avg_degree": 0.0,
"module_name": "jtag_io"
},
"error": nul... | multi_tool | graph_extractor+optimization_advisor | compositional | 2aa0a3b1fe7c | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For the jtag_io module, given that its DFG has no edges and consists only of port nodes, how worthwhile do the power optimization suggestions look, and what improvement do they estimate?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[1107 chars elided]...
"node_... | 6797f0d5ddfc | 48b655988ca3 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "example_projects/quartus_test_prj_template_v4/ip/jtag_io/jtag_io_bb.v",
"sha256": "dc671cdd53e5baee60309fbd1fd204c57a6efe69d48becdada23899895647e78"
} |
For eth_mac_quad_wrapper, how would you weigh the area optimization recommendations against what the CDFG structure suggests, and what trade-offs should I expect? | The CDFG for eth_mac_quad_wrapper has 101 nodes and 6389 edges with an average degree of 63.26, dominated by 16 sync_reset, 4 avst2axis, 4 axis2avst, 4 mac_ts_insert, and 4 xcvr_ctrl instances plus one mac, which indicates substantial replication that could benefit from resource sharing. The area-focused optimization s... | github_repos/corundum_corundum/fpga/mqnic/DK_DEV_1SDX_P_A/fpga_100g/rtl/eth_mac_quad_wrapper.v | eth_mac_quad_wrapper | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[80796 chars elided]...
"node_count": 101,
"edge_count": 6389,
"graph_properties": {
"node_types": {
"$not": 1,
"$logic_not": 13,
"$logic_or": 12,
"$reduce_bool": 4,
"mac": 1,
"avst... | multi_tool | graph_extractor+optimization_advisor | compositional | bf0b6583273b | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For eth_mac_quad_wrapper, how would you weigh the area optimization recommendations against what the CDFG structure suggests, and what trade-offs should I expect?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[80796 chars elided]...
"node_count": 101,
"edge_... | 47bd6b6914c0 | 48765c87cefb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/mqnic/DK_DEV_1SDX_P_A/fpga_100g/rtl/eth_mac_quad_wrapper.v",
"sha256": "68601a77f500d7b042fa40585dfab6d42fcf2fbd1b5f415b39196f4f0400c857"
} |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.