Contributor workbench: eight sessions and three recorded browser sessions
Browse files- README.md +31 -22
- sessions.jsonl +8 -3
- videos/cad_milk_frother.mp4 +3 -0
- videos/cad_mug.mp4 +3 -0
- videos/rcad_cupboard.mp4 +3 -0
README.md
CHANGED
|
@@ -103,30 +103,39 @@ Measuring metric size from photos needs a metric source: depth, a known-size ref
|
|
| 103 |
|
| 104 |
## With a contributor in the loop
|
| 105 |
|
| 106 |
-
The scale tasks fail because the real size isn't in the asset. The `contributor-*` tasks put a
|
| 107 |
-
env serves a page where
|
| 108 |
-
|
| 109 |
-
`last_interaction`. An approval saves the object as a new version of a sim-asset artifact, with its checks and
|
| 110 |
-
results attached, and the same hidden checks grade the run.
|
| 111 |
-
|
| 112 |
-
|
| 113 |
-
|
| 114 |
-
*
|
| 115 |
-
|
| 116 |
-
|
| 117 |
-
|
| 118 |
-
|
| 119 |
-
|
| 120 |
-
|
| 121 |
-
|
| 122 |
-
|
| 123 |
-
|
| 124 |
-
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 125 |
|
| 126 |
`sessions.jsonl` (config `contributor_sessions`) has one row per session: the chat, the contributor's actions and what
|
| 127 |
-
each
|
| 128 |
-
|
| 129 |
-
mug's.
|
| 130 |
|
| 131 |
### Can the browser run MuJoCo instead of Genesis?
|
| 132 |
|
|
|
|
| 103 |
|
| 104 |
## With a contributor in the loop
|
| 105 |
|
| 106 |
+
The scale tasks fail because the real size isn't in the asset. The `contributor-*` tasks put a contributor in the loop.
|
| 107 |
+
The env serves a page where they look at, lift, lean, drop, fill or shake the object, or open its doors, and each
|
| 108 |
+
action runs Genesis. They chat with the agent there, and approve or reject the object. The agent reads what they did
|
| 109 |
+
with `last_interaction`. An approval saves the object as a new version of a sim-asset artifact, with its checks and
|
| 110 |
+
probe results attached, and the same hidden checks grade the run.
|
| 111 |
+
|
| 112 |
+
<video src="https://huggingface.co/datasets/earakely-scale/GenesisWorkbenchEnv-AgentEnv/resolve/main/videos/cad_mug.mp4" controls muted playsinline width="100%"></video>
|
| 113 |
+
|
| 114 |
+
*`contributor-cad-mug`, recorded in Chrome: the contributor lifts the mug (the red cylinder is a 330 ml can, for scale),
|
| 115 |
+
says it's tiny, gives its real size when the agent asks, checks the fix, and approves it. Stretches where the agent is
|
| 116 |
+
working play at 8× speed. The other recordings: [the milk frother's loose ring](https://huggingface.co/datasets/earakely-scale/GenesisWorkbenchEnv-AgentEnv/resolve/main/videos/cad_milk_frother.mp4)
|
| 117 |
+
and [the cupboard's jammed doors](https://huggingface.co/datasets/earakely-scale/GenesisWorkbenchEnv-AgentEnv/resolve/main/videos/rcad_cupboard.mp4).*
|
| 118 |
+
|
| 119 |
+
A script plays the contributor in these 8 sessions, not a person. It knows each object's real size and weight from the
|
| 120 |
+
Google scan the CAD was built from, judges each fix only from what the page shows it, and never sees the hidden checks.
|
| 121 |
+
Three sessions went through the page in Chrome with `scripts/record_session.py`, and the rest through the page's HTTP
|
| 122 |
+
API with `scripts/contributor.py`. The agent is Claude Code with `claude-sonnet-5-5`.
|
| 123 |
+
|
| 124 |
+
| Task | Agent alone (Sonnet / Opus) | With a contributor | Contributor | The agent's edits | Saved as |
|
| 125 |
+
|---|---|---|---|---|---|
|
| 126 |
+
| `contributor-cad-bowl` | 0.50 / 0.75 | 1.00, approved | scripted | `set_scale(factor=1.99)`; `set_shell(part=body, thickness=0.006)`; `set_shell(part=body)`; `set_material(part=body, material=ceramic)`; `set_inertial(link=body, mass=2)` | `cad_serving_bowl` v1 |
|
| 127 |
+
| `contributor-cad-coffeemaker` | 1.00 / 1.00 | 1.00, approved | scripted | `set_shell(part=housing, thickness=0.003)`; `set_shell(part=steel, thickness=0.001)`; `set_shell(part=steel_2, thickness=0.001)`; `set_shell(part=housing, thickness=0.002)`; `set_shell(part=steel, thickness=0.0009)`; `set_shell(part=steel_2, thickness=0.0009)` | `cad_coffee_maker` v1 |
|
| 128 |
+
| `contributor-cad-frother` | 1.00 / 1.00 | 1.00, approved | browser, recorded | `remove_part(part=cord, restore=False)` | `cad_milk_frother` v1 |
|
| 129 |
+
| `contributor-cad-mug` | 0.50 / 0.75 | 1.00, approved | scripted | `set_scale(factor=1.4)`; `set_shell(part=body, thickness=0.004)`; `set_shell(part=body)`; `set_inertial(link=body, mass=0.3)`; `set_scale(factor=1.516)`; `set_inertial(link=body, mass=0.3)` | `cad_mug` v2 |
|
| 130 |
+
| `contributor-cad-mug` | 0.50 / 0.75 | 1.00, approved | browser, recorded | `set_scale(factor=1.38)`; `set_inertial(link=body, mass=0.3)`; `set_scale(factor=1.516)`; `set_inertial(link=body, mass=0.3)` | `cad_mug` v3 |
|
| 131 |
+
| `contributor-rcad-cupboard` | 1.00 / 1.00 | 1.00, approved | scripted | `set_self_collision(enabled=False)` | `rcad_cupboard` v1 |
|
| 132 |
+
| `contributor-rcad-cupboard` | 1.00 / 1.00 | 1.00, approved | browser, recorded | `set_self_collision(enabled=False)` | `rcad_cupboard` v2 |
|
| 133 |
+
| `contributor-scan-mug` | 1.00 / 1.00 | 1.00, approved | scripted | `set_material(part=body, material=ceramic)`; `set_shell(part=body, thickness=0.004)` | `scan_mug` v1 |
|
| 134 |
|
| 135 |
`sessions.jsonl` (config `contributor_sessions`) has one row per session: the chat, the contributor's actions and what
|
| 136 |
+
each showed them, the agent's calls and edits, the checks, and the saved sim asset's id, version and metadata. Each
|
| 137 |
+
approval of the same object adds a version, so the mug has several. A pilot mug run is left out: its scripted
|
| 138 |
+
contributor gave the agent a rim width that isn't the real mug's.
|
| 139 |
|
| 140 |
### Can the browser run MuJoCo instead of Genesis?
|
| 141 |
|
sessions.jsonl
CHANGED
|
@@ -1,3 +1,8 @@
|
|
| 1 |
-
{"id": "contributor-cad-bowl-c3", "task": "contributor-cad-bowl", "object": "cad_serving_bowl", "model": "claude-sonnet-5-5", "contributor": "
|
| 2 |
-
{"id": "contributor-cad-
|
| 3 |
-
{"id": "contributor-
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
{"id": "contributor-cad-bowl-c3", "task": "contributor-cad-bowl", "object": "cad_serving_bowl", "model": "claude-sonnet-5-5", "contributor": "scripts/contributor.py, over the page's HTTP API", "video": null, "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "width", "result": true, "description": "width within 28-36 cm; got 32.0 cm"}, {"id": "mass", "result": true, "description": "mass within 1.2-3.0 kg for a real serving bowl; got 2.000 kg"}, {"id": "cavity-open", "result": true, "description": "the opening holds dropped objects; 5 of 5 spheres inside"}, {"id": "rests-upright", "result": true, "description": "rests upright on a flat bench; tilt 0.0 deg, speed 0.001"}], "chat": [{"i": 1, "t": 17.2, "from": "contributor", "text": "This is supposed to be a big serving bowl for the table, but it's the size of a cereal bowl."}, {"i": 2, "t": 24.5, "from": "agent", "text": "The bowl is modelled at 16.1 cm across and 7.2 cm tall. That's cereal-bowl size, so I agree it's too small for a serving bowl. The photo's grid doesn't give me a reliable size, so I'd be guessing.\n\nWhat is the real bowl's rim diameter in cm? Its height or weight would help too, if you have them. A big serving bowl is usually 24\u201330 cm across.\n\nI'll scale it uniformly to that diameter. I'll also check the mass afterwards, because it's currently modelled as solid porcelain and a real bowl is a thin shell."}, {"i": 3, "t": 25.2, "from": "contributor", "text": "It's a large ceramic serving bowl on a small foot: about 32 cm across and 14 to 15 cm tall, and it weighs around 2 kg."}, {"i": 4, "t": 50.7, "from": "agent", "text": "I resized the bowl to match your measurements and set its weight to 2 kg.\n\n- **Size:** I scaled it up by 1.99\u00d7. It's now 32.1 cm across and 14.3 cm tall, which matches your 32 cm by 14\u201315 cm. The shape and proportions are unchanged.\n- **Weight:** At the new size the model came out at 3.1 kg even with a lighter ceramic material. I set the mass to 2.0 kg to match your bowl. The centre of mass is unchanged, about 5.8 cm above the base. The CAD walls are probably thicker than your real bowl's, so the 2 kg is a mass override and not a thinner wall. I tried a hollow-shell model, but it needed 3 mm walls to reach 2 kg and moved the centre of mass higher. I dropped it.\n- **Probes:** The bowl rests stably. On the tilt table it holds up to 40\u00b0 and topples at 45\u00b0, which is reasonable for a wide bowl on a small foot.\n\nTry lifting it again and check the weight and size. If the weight still feels off, or you'd rather change the wall thickness, tell me and I'll adjust. Approve it if it looks right."}, {"i": 5, "t": 53.5, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 16.8, "action": "look", "summary": "Looked at the serving bowl.", "object_edits": 0}, {"i": 2, "t": 17.2, "action": "lift", "summary": "It weighs 0.42 kg, about as heavy as a 500 ml bottle of water. It stands 7.2 cm tall and is 16.1 cm by 16.1 cm across.", "object_edits": 0}, {"i": 3, "t": 51.8, "action": "lift", "summary": "It weighs 2.00 kg, about as heavy as a 2 L bottle of soda. It stands 14.3 cm tall and is 32.0 cm by 32.0 cm across.", "object_edits": 5}, {"i": 4, "t": 53.0, "action": "fill", "summary": "5 of 5 marbles dropped into it stay inside.", "object_edits": 5}, {"i": 5, "t": 53.5, "action": "look", "summary": "Looked at the serving bowl.", "object_edits": 5}], "agent_calls": [{"i": 1, "t": 19.7, "tool": "inspect", "args": {}}, {"i": 2, "t": 20.0, "tool": "last_interaction", "args": {"count": 3}}, {"i": 3, "t": 20.0, "tool": "source_photo", "args": {}}, {"i": 4, "t": 29.6, "tool": "set_scale", "args": {"factor": 1.99}}, {"i": 5, "t": 32.2, "tool": "set_shell", "args": {"part": "body", "thickness": 0.006}}, {"i": 6, "t": 39.2, "tool": "set_shell", "args": {"part": "body"}}, {"i": 7, "t": 39.4, "tool": "set_material", "args": {"part": "body", "material": "ceramic"}}, {"i": 8, "t": 40.7, "tool": "set_inertial", "args": {"link": "body", "mass": 2.0}}, {"i": 9, "t": 45.2, "tool": "run_probe", "args": {"kind": "tip"}}, {"i": 10, "t": 47.0, "tool": "run_probe", "args": {"kind": "rest"}}], "agent_edits": [{"tool": "set_scale", "args": {"factor": 1.99}}, {"tool": "set_shell", "args": {"part": "body", "thickness": 0.006}}, {"tool": "set_shell", "args": {"part": "body"}}, {"tool": "set_material", "args": {"part": "body", "material": "ceramic"}}, {"tool": "set_inertial", "args": {"link": "body", "mass": 2.0}}], "diff": "--- cad_serving_bowl.as_delivered\n+++ cad_serving_bowl.current\n@@ -1,15 +1,17 @@\n {\n- \"scale\": 1.0,\n- \"override\": null,\n+ \"scale\": 1.99,\n+ \"override\": {\n+ \"mass\": 2.0\n+ },\n \"parts\": [\n {\n \"name\": \"body\",\n- \"material\": \"porcelain\",\n- \"density\": 2400.0,\n+ \"material\": \"ceramic\",\n+ \"density\": 2300.0,\n \"mode\": \"solid\",\n \"thickness\": null,\n \"removed\": null\n }\n ]\n }\n-<inertial pos=\"-0.0000 -0.0000 0.0290\" mass=\"0.4170\" fullinertia=\"8.3762e-04 8.3804e-04 1.3307e-03 -1.3888e-07 8.6474e-09 9.4462e-10\"/>\n+<inertial pos=\"-0.0000 -0.0000 0.0578\" mass=\"2.0000\" fullinertia=\"1.5909e-02 1.5917e-02 2.5274e-02 -2.6378e-06 1.6424e-07 1.7941e-08\"/>\n", "duration_s": 57.6, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/cad_serving_bowl", "version": 1, "metadata": {"object": "cad_serving_bowl", "kind": "mesh", "label": "serving bowl", "passed": true, "acceptance": {"width": true, "mass": true, "cavity-open": true, "rests-upright": true}, "agent_edits": 5, "approval_note": "Looks and feels like the real one now."}}}
|
| 2 |
+
{"id": "contributor-cad-coffeemaker-c6", "task": "contributor-cad-coffeemaker", "object": "cad_coffee_maker", "model": "claude-sonnet-5-5", "contributor": "scripts/contributor.py, over the page's HTTP API", "video": null, "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "mass", "result": true, "description": "mass within 2.2-3.6 kg for a real coffee maker; got 3.092 kg"}, {"id": "rests-upright", "result": true, "description": "rests upright on a flat bench; tilt 0.0 deg, speed 0.0"}, {"id": "not-top-heavy", "result": true, "description": "stays put on a tilt table up to 20 deg; first topple at 40"}], "chat": [{"i": 1, "t": 16.6, "from": "contributor", "text": "The coffee maker is as heavy as a microwave. I should be able to lift it with one hand."}, {"i": 2, "t": 32.2, "from": "agent", "text": "The coffee maker was too heavy because the model treated every part as solid material, so it weighed 10.66 kg. A real coffee maker has a hollow plastic housing and a thin double-walled steel carafe. I changed three parts to thin shells:\n\n- **Housing:** 3 mm ABS shell (4.14 kg to 1.70 kg).\n- **Carafe body:** 1 mm stainless shell (4.02 kg to 1.41 kg).\n- **Upper steel part:** 1 mm stainless shell (2.48 kg to 0.76 kg).\n\nIt now weighs **3.87 kg**, which is light enough to lift with one hand. The centre of mass is still low and central at about 15.5 cm up. In the tilt test it holds on a table tilted up to 35\u00b0 and only topples from 40\u00b0.\n\nPlease lift it again and tell me what you think. If you have the real unit, what does it weigh with an empty carafe? I'd rather set the mass from your number than guess. Most 12-cup thermal-carafe models are around 3 to 4 kg."}, {"i": 3, "t": 35.0, "from": "contributor", "text": "Still not right: it's 3.87 kg heavy, and the real one is about 3 kg. It's a 12-cup drip coffee maker with a stainless thermal carafe: a plastic housing, mostly hollow inside. The whole thing weighs about 3 kg."}, {"i": 4, "t": 46.3, "from": "agent", "text": "Thanks, that helps. I thinned the walls to what a real unit has, and the coffee maker now weighs **3.09 kg**, close to your 3 kg.\n\n- **Housing:** 2 mm ABS shell.\n- **Carafe body and upper steel part:** 0.9 mm stainless shells.\n\nIt still stands steady, with the centre of mass low at about 15.4 cm up. It holds on a table tilted up to 35\u00b0 and topples from 40\u00b0, as before.\n\nPlease lift it again and check the weight. If it feels right, approve it. If you want it closer to exactly 3.0 kg, tell me and I'll set the mass directly."}, {"i": 5, "t": 48.9, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 16.1, "action": "look", "summary": "Looked at the coffee maker.", "object_edits": 0}, {"i": 2, "t": 16.6, "action": "lift", "summary": "It weighs 10.66 kg, about as heavy as a full 10 L bucket of water. It stands 32.4 cm tall and is 26.8 cm by 20.3 cm across.", "object_edits": 0}, {"i": 3, "t": 35.0, "action": "lift", "summary": "It weighs 3.87 kg, about as heavy as a 5 kg bag of flour. It stands 32.4 cm tall and is 26.8 cm by 20.3 cm across.", "object_edits": 3}, {"i": 4, "t": 47.6, "action": "lift", "summary": "It weighs 3.09 kg, about as heavy as a 2 L bottle of soda. It stands 32.4 cm tall and is 26.8 cm by 20.3 cm across.", "object_edits": 6}, {"i": 5, "t": 48.4, "action": "lean", "summary": "On a slowly tilting table it tips over at 40\u00b0.", "object_edits": 6}, {"i": 6, "t": 48.9, "action": "look", "summary": "Looked at the coffee maker.", "object_edits": 6}], "agent_calls": [{"i": 1, "t": 19.7, "tool": "inspect", "args": {}}, {"i": 2, "t": 20.0, "tool": "last_interaction", "args": {"count": 3}}, {"i": 3, "t": 20.0, "tool": "source_photo", "args": {}}, {"i": 4, "t": 23.4, "tool": "set_shell", "args": {"part": "housing", "thickness": 0.003}}, {"i": 5, "t": 23.7, "tool": "set_shell", "args": {"part": "steel", "thickness": 0.001}}, {"i": 6, "t": 23.9, "tool": "set_shell", "args": {"part": "steel_2", "thickness": 0.001}}, {"i": 7, "t": 25.0, "tool": "inspect", "args": {}}, {"i": 8, "t": 28.1, "tool": "run_probe", "args": {"kind": "tip"}}, {"i": 9, "t": 40.5, "tool": "set_shell", "args": {"part": "housing", "thickness": 0.002}}, {"i": 10, "t": 40.8, "tool": "set_shell", "args": {"part": "steel", "thickness": 0.0009}}, {"i": 11, "t": 41.1, "tool": "set_shell", "args": {"part": "steel_2", "thickness": 0.0009}}, {"i": 12, "t": 43.2, "tool": "run_probe", "args": {"kind": "tip"}}], "agent_edits": [{"tool": "set_shell", "args": {"part": "housing", "thickness": 0.003}}, {"tool": "set_shell", "args": {"part": "steel", "thickness": 0.001}}, {"tool": "set_shell", "args": {"part": "steel_2", "thickness": 0.001}}, {"tool": "set_shell", "args": {"part": "housing", "thickness": 0.002}}, {"tool": "set_shell", "args": {"part": "steel", "thickness": 0.0009}}, {"tool": "set_shell", "args": {"part": "steel_2", "thickness": 0.0009}}], "diff": "--- cad_coffee_maker.as_delivered\n+++ cad_coffee_maker.current\n@@ -6,24 +6,24 @@\n \"name\": \"housing\",\n \"material\": \"plastic_abs\",\n \"density\": 1050.0,\n- \"mode\": \"solid\",\n- \"thickness\": null,\n+ \"mode\": \"shell\",\n+ \"thickness\": 0.002,\n \"removed\": null\n },\n {\n \"name\": \"steel\",\n \"material\": \"stainless_steel\",\n \"density\": 7900.0,\n- \"mode\": \"solid\",\n- \"thickness\": null,\n+ \"mode\": \"shell\",\n+ \"thickness\": 0.0009,\n \"removed\": null\n },\n {\n \"name\": \"steel_2\",\n \"material\": \"stainless_steel\",\n \"density\": 7900.0,\n- \"mode\": \"solid\",\n- \"thickness\": null,\n+ \"mode\": \"shell\",\n+ \"thickness\": 0.0009,\n \"removed\": null\n },\n {\n@@ -44,4 +44,4 @@\n }\n ]\n }\n-<inertial pos=\"-0.0138 -0.0000 0.1548\" mass=\"10.6617\" fullinertia=\"1.3823e-01 1.5615e-01 7.4320e-02 1.3779e-05 1.3481e-03 -1.3328e-05\"/>\n+<inertial pos=\"-0.0147 -0.0000 0.1543\" mass=\"3.0922\" fullinertia=\"3.3281e-02 3.8652e-02 2.0758e-02 2.9792e-04 -1.7115e-04 -1.4439e-04\"/>\n", "duration_s": 52.7, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/cad_coffee_maker", "version": 1, "metadata": {"object": "cad_coffee_maker", "kind": "mesh", "label": "coffee maker", "passed": true, "acceptance": {"mass": true, "rests-upright": true, "not-top-heavy": true}, "agent_edits": 6, "approval_note": "Looks and feels like the real one now."}}}
|
| 3 |
+
{"id": "contributor-cad-frother-r2", "task": "contributor-cad-frother", "object": "cad_milk_frother", "model": "claude-sonnet-5-5", "contributor": "scripts/record_session.py, through the page in Chrome (recorded)", "video": "videos/cad_milk_frother.mp4", "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "no-floating-parts", "result": true, "description": "every part touches another; floating: none"}, {"id": "mass", "result": true, "description": "mass within 0.4-1.2 kg for a real milk frother; got 0.664 kg"}, {"id": "rests-upright", "result": true, "description": "rests upright on a flat bench; tilt 0.0 deg, speed 0.0023"}], "chat": [{"i": 1, "t": 100.9, "from": "contributor", "text": "There's a blue ring floating next to the milk frother, and it moves with the frother when I push it."}, {"i": 2, "t": 118.5, "from": "agent", "text": "The blue ring was the power cord. It was modelled as a separate ring 24.8 mm from the nearest part, so it floated beside the frother and moved with it.\n\nI removed it. The parts probe now shows nothing floating, and the frother rests stable and upright. The mass went from 0.672 to 0.664 kg, because the cord only weighed about 9 g.\n\nThe real frother has a short cord coming out of the back of the base, and I can't re-attach the ring there. If you want the cord kept, the CAD needs regenerating with it attached to the base. For physics it makes little difference.\n\nLook at it again and push it. Does it behave right now, and do you approve?"}, {"i": 3, "t": 140.9, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 92.9, "action": "look", "summary": "Looked at the milk frother.", "object_edits": 0}, {"i": 2, "t": 96.7, "action": "shake", "summary": "Some parts aren't attached to anything: cord is 24.8 mm from the nearest part.", "object_edits": 0}, {"i": 3, "t": 125.7, "action": "shake", "summary": "Everything holds together; no part is loose.", "object_edits": 1}, {"i": 4, "t": 129.4, "action": "lift", "summary": "It weighs 0.66 kg, about as heavy as a 500 ml bottle of water. It stands 13.2 cm tall and is 14.5 cm by 11.2 cm across.", "object_edits": 1}, {"i": 5, "t": 133.7, "action": "lean", "summary": "On a slowly tilting table it tips over at 35\u00b0.", "object_edits": 1}, {"i": 6, "t": 137.4, "action": "look", "summary": "Looked at the milk frother.", "object_edits": 1}], "agent_calls": [{"i": 1, "t": 103.9, "tool": "inspect", "args": {}}, {"i": 2, "t": 104.7, "tool": "render", "args": {}}, {"i": 3, "t": 104.7, "tool": "last_interaction", "args": {"count": 3}}, {"i": 4, "t": 106.8, "tool": "source_photo", "args": {}}, {"i": 5, "t": 106.9, "tool": "run_probe", "args": {"kind": "parts"}}, {"i": 6, "t": 109.1, "tool": "remove_part", "args": {"part": "cord", "restore": false}}, {"i": 7, "t": 110.5, "tool": "run_probe", "args": {"kind": "parts"}}, {"i": 8, "t": 114.1, "tool": "run_probe", "args": {"kind": "rest"}}], "agent_edits": [{"tool": "remove_part", "args": {"part": "cord", "restore": false}}], "diff": "--- cad_milk_frother.as_delivered\n+++ cad_milk_frother.current\n@@ -32,8 +32,8 @@\n \"density\": 1100.0,\n \"mode\": \"solid\",\n \"thickness\": null,\n- \"removed\": null\n+ \"removed\": true\n }\n ]\n }\n-<inertial pos=\"0.0067 -0.0009 0.0652\" mass=\"0.6724\" fullinertia=\"1.4682e-03 1.7359e-03 1.6504e-03 5.1295e-05 1.1946e-05 -3.5867e-05\"/>\n+<inertial pos=\"0.0056 0.0000 0.0660\" mass=\"0.6636\" fullinertia=\"1.3910e-03 1.6394e-03 1.5372e-03 1.3030e-19 -3.1279e-05 1.9659e-19\"/>\n", "duration_s": 146.2, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/cad_milk_frother", "version": 1, "metadata": {"object": "cad_milk_frother", "kind": "mesh", "label": "milk frother", "passed": true, "acceptance": {"no-floating-parts": true, "mass": true, "rests-upright": true}, "agent_edits": 1, "approval_note": "Looks and feels like the real one now."}}}
|
| 4 |
+
{"id": "contributor-cad-mug-c2", "task": "contributor-cad-mug", "object": "cad_mug", "model": "claude-sonnet-5-5", "contributor": "scripts/contributor.py, over the page's HTTP API", "video": null, "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "height", "result": true, "description": "height within 8.5-11.5 cm; got 9.4 cm"}, {"id": "mass", "result": true, "description": "mass within 0.25-0.45 kg for a real mug; got 0.300 kg"}, {"id": "cavity-open", "result": true, "description": "the opening holds dropped objects; 5 of 5 spheres inside"}, {"id": "rests-upright", "result": true, "description": "rests upright on a flat bench; tilt 0.0 deg, speed 0.0"}], "chat": [{"i": 1, "t": 16.9, "from": "contributor", "text": "This mug is tiny, like an espresso cup next to my hand. It should be a normal coffee mug."}, {"i": 2, "t": 26.9, "from": "agent", "text": "I looked at the mug and the source photos. The model is 6.2 cm tall and 9 cm across the body, with the handle taking it to 11.6 cm. It weighs 0.20 kg. Ceramic is the right material, and that mass fits the size it has now.\n\nThe photos are on a 1 cm grid, but I can't read the real size from them reliably. Can you measure the real mug and tell me:\n\n1. Its height, rim to base, in cm.\n2. Its rim width, not counting the handle, in cm.\n3. Its weight, if you have a scale.\n\nOnce I have the height, I'll rescale the mug to match. Mass will increase with the cube of the scale. A 1.4\u00d7 scale would give about 0.55 kg, which is too heavy for a normal mug (typically 0.3\u20130.4 kg). If that happens, I'll make the body a thin shell so the mass matches your real mug."}, {"i": 3, "t": 26.9, "from": "contributor", "text": "It's a wide ceramic coffee mug: about 9.4 cm tall and 12 cm across the rim, 16 cm including the handle. It weighs around 300 g."}, {"i": 4, "t": 49.1, "from": "agent", "text": "I rescaled the mug and set its weight to match yours. Please check it in the browser.\n\n- **Size:** I scaled the whole mug 1.4\u00d7. It is now 8.7 cm tall, 12.6 cm across the rim and 16.3 cm including the handle. The model is wider for its height than your mug. A uniform scale can't match both, so I split the difference. Your height of 9.4 cm would need about 1.5\u00d7, and your 12 cm rim about 1.33\u00d7. If you care more about one, I can use that factor instead.\n- **Weight:** I set it to 0.30 kg. Scaling alone gave 0.56 kg, because the CAD walls are thicker than your mug's. A thin-shell wall at ceramic density didn't get close either, so I set the mass directly. The centre of mass still comes from the geometry.\n- **Probes:** The mug sits still when placed. On the tilt table it holds up to 45\u00b0 and topples at 50\u00b0.\n\nLift it and put it next to your real mug. Tell me if the height or the width looks off, or if the weight feels wrong."}, {"i": 5, "t": 51.7, "from": "contributor", "text": "Still not right: it's 8.7 cm tall, and the real one is about 9.4 cm."}, {"i": 6, "t": 63.2, "from": "agent", "text": "I rescaled the mug to 1.516\u00d7, which makes it 9.4 cm tall to match yours. I kept the weight at 0.30 kg.\n\nThe mug is now 17.6 cm across including the handle and 13.6 cm across the body. Your real mug is 16 cm and 12 cm, so the model is now about 1.5 cm too wide with the handle and 1.6 cm too wide at the rim. Its proportions are wider for its height than your mug's, and a uniform scale can't fix that. I put height first, as you asked.\n\nThe probes behave as before: the mug sits still and holds on the tilt table up to 45\u00b0.\n\nTry lifting it again. If the width bothers you more than the height, I can drop the scale to about 1.4 and the height would go back to 8.7 cm."}, {"i": 7, "t": 110.4, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 16.5, "action": "look", "summary": "Looked at the mug.", "object_edits": 0}, {"i": 2, "t": 16.9, "action": "lift", "summary": "It weighs 0.20 kg, about as heavy as an apple. It stands 6.2 cm tall and is 11.6 cm by 9.0 cm across.", "object_edits": 0}, {"i": 3, "t": 51.7, "action": "lift", "summary": "It weighs 0.30 kg, about as heavy as a can of soda. It stands 8.7 cm tall and is 16.3 cm by 12.6 cm across.", "object_edits": 4}, {"i": 4, "t": 64.2, "action": "lift", "summary": "It weighs 0.30 kg, about as heavy as a can of soda. It stands 9.4 cm tall and is 17.6 cm by 13.6 cm across.", "object_edits": 6}, {"i": 5, "t": 64.9, "action": "lean", "summary": "On a slowly tilting table it tips over at 50\u00b0.", "object_edits": 6}, {"i": 6, "t": 65.4, "action": "look", "summary": "Looked at the mug.", "object_edits": 6}], "agent_calls": [{"i": 1, "t": 20.0, "tool": "inspect", "args": {}}, {"i": 2, "t": 20.3, "tool": "last_interaction", "args": {"count": 3}}, {"i": 3, "t": 20.3, "tool": "source_photo", "args": {}}, {"i": 4, "t": 32.5, "tool": "set_scale", "args": {"factor": 1.4}}, {"i": 5, "t": 35.6, "tool": "set_shell", "args": {"part": "body", "thickness": 0.004}}, {"i": 6, "t": 39.1, "tool": "set_shell", "args": {"part": "body"}}, {"i": 7, "t": 40.2, "tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}, {"i": 8, "t": 41.9, "tool": "run_probe", "args": {"kind": "rest"}}, {"i": 9, "t": 43.3, "tool": "run_probe", "args": {"kind": "tip"}}, {"i": 10, "t": 55.3, "tool": "set_scale", "args": {"factor": 1.516}}, {"i": 11, "t": 56.8, "tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}, {"i": 12, "t": 60.1, "tool": "run_probe", "args": {"kind": "tip"}}], "agent_edits": [{"tool": "set_scale", "args": {"factor": 1.4}}, {"tool": "set_shell", "args": {"part": "body", "thickness": 0.004}}, {"tool": "set_shell", "args": {"part": "body"}}, {"tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}, {"tool": "set_scale", "args": {"factor": 1.516}}, {"tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}], "diff": "--- cad_mug.as_delivered\n+++ cad_mug.current\n@@ -1,6 +1,8 @@\n {\n- \"scale\": 1.0,\n- \"override\": null,\n+ \"scale\": 1.516,\n+ \"override\": {\n+ \"mass\": 0.3\n+ },\n \"parts\": [\n {\n \"name\": \"body\",\n@@ -12,4 +14,4 @@\n }\n ]\n }\n-<inertial pos=\"0.0025 -0.0000 0.0259\" mass=\"0.2033\" fullinertia=\"2.1454e-04 2.4361e-04 3.1080e-04 -5.9143e-09 -3.0714e-06 -2.0930e-09\"/>\n+<inertial pos=\"0.0038 -0.0000 0.0392\" mass=\"0.3000\" fullinertia=\"7.2757e-04 8.2615e-04 1.0540e-03 -2.0057e-08 -1.0416e-05 -7.0980e-09\"/>\n", "duration_s": 114.2, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/cad_mug", "version": 2, "metadata": {"object": "cad_mug", "kind": "mesh", "label": "mug", "passed": true, "acceptance": {"height": true, "mass": true, "cavity-open": true, "rests-upright": true}, "agent_edits": 6, "approval_note": "Looks and feels like the real one now."}}}
|
| 5 |
+
{"id": "contributor-cad-mug-r1", "task": "contributor-cad-mug", "object": "cad_mug", "model": "claude-sonnet-5-5", "contributor": "scripts/record_session.py, through the page in Chrome (recorded)", "video": "videos/cad_mug.mp4", "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "height", "result": true, "description": "height within 8.5-11.5 cm; got 9.4 cm"}, {"id": "mass", "result": true, "description": "mass within 0.25-0.45 kg for a real mug; got 0.300 kg"}, {"id": "cavity-open", "result": true, "description": "the opening holds dropped objects; 5 of 5 spheres inside"}, {"id": "rests-upright", "result": true, "description": "rests upright on a flat bench; tilt 0.0 deg, speed 0.0"}], "chat": [{"i": 1, "t": 115.0, "from": "contributor", "text": "This mug is tiny, like an espresso cup next to my hand. It should be a normal coffee mug."}, {"i": 2, "t": 124.9, "from": "agent", "text": "The mug is modelled at 6.2 cm tall and 11.6 \u00d7 9.0 cm across, including the handle. That's small, but the photo shows a squat, wide mug. I'd rather not guess the size, so I need two measurements from the real mug:\n\n1. How tall is it, rim to base, in cm?\n2. How wide is the cup body across the rim, not counting the handle?\n\nIf you also know roughly what it weighs empty, tell me. Scaling up grows the mass with the cube of the factor, so I'll check that it ends up at a believable weight for ceramic."}, {"i": 3, "t": 132.4, "from": "contributor", "text": "It's a wide ceramic coffee mug: about 9.4 cm tall and 12 cm across the rim, 16 cm including the handle. It weighs around 300 g."}, {"i": 4, "t": 149.1, "from": "agent", "text": "I scaled the mug up to a normal coffee-mug size, and it sits stable.\n\n- **Size:** I scaled it by 1.38. It now measures 8.6 cm tall, 12.4 cm across the cup body and 16.0 cm including the handle. The cup width and the overall width match yours. The height is about 0.8 cm short of 9.4 cm. The model is squatter than your mug, and I can only scale it uniformly. A bigger factor would get the height right but make it too wide.\n- **Weight:** Scaling alone would have made it 0.53 kg, which is too heavy for the 300 g you measured. I set the mass to 0.30 kg. The centre of mass is unchanged, at about 3.6 cm up.\n- **Probes:** It rests flat and stable. It holds on a tilt table up to 40\u00b0 and topples from about 50\u00b0, which is reasonable for a wide, low mug.\n\nLift it, look at it next to your hand, and drop it. Tell me if the size or weight still feels off. If you'd rather have the exact 9.4 cm height, I can use a larger scale, but the mug will end up wider than yours."}, {"i": 5, "t": 161.3, "from": "contributor", "text": "Still not right: it's 8.6 cm tall, and the real one is about 9.4 cm."}, {"i": 6, "t": 173.3, "from": "agent", "text": "I rescaled the mug so it is now 9.4 cm tall, matching your measurement.\n\n- **Size:** The scale is 1.516. The mug is 9.4 cm tall, 13.6 cm across the cup body and 17.6 cm including the handle.\n- **Width:** It is now wider than your mug, which is 12 cm across the rim and 16 cm with the handle. The model is squatter than the real mug, and I can only scale it uniformly. Height matches, but the rim and handle are about 1.5 cm too wide. A 1.38 scale fits the width but leaves it 0.8 cm too short.\n- **Weight:** I kept it at 0.30 kg, as you measured. The centre of mass is about 3.9 cm up.\n- **Probes:** The tilt probe shows it holds up to 45\u00b0 and topples from about 50\u00b0, so it is still stable.\n\nPlease lift it and compare it with the real mug. Which matters more to you, the 9.4 cm height or the 12 cm and 16 cm widths? I'll adjust the scale to whichever you pick. If you approve this one, I'll leave it as it is."}, {"i": 7, "t": 190.9, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 107.3, "action": "look", "summary": "Looked at the mug.", "object_edits": 0}, {"i": 2, "t": 111.0, "action": "lift", "summary": "It weighs 0.20 kg, about as heavy as an apple. It stands 6.2 cm tall and is 11.6 cm by 9.0 cm across.", "object_edits": 0}, {"i": 3, "t": 157.5, "action": "lift", "summary": "It weighs 0.30 kg, about as heavy as a can of soda. It stands 8.6 cm tall and is 16.0 cm by 12.4 cm across.", "object_edits": 2}, {"i": 4, "t": 179.9, "action": "lift", "summary": "It weighs 0.30 kg, about as heavy as a can of soda. It stands 9.4 cm tall and is 17.6 cm by 13.6 cm across.", "object_edits": 4}, {"i": 5, "t": 183.8, "action": "lean", "summary": "On a slowly tilting table it tips over at 50\u00b0.", "object_edits": 4}, {"i": 6, "t": 187.4, "action": "look", "summary": "Looked at the mug.", "object_edits": 4}], "agent_calls": [{"i": 1, "t": 118.5, "tool": "inspect", "args": {}}, {"i": 2, "t": 118.7, "tool": "last_interaction", "args": {"count": 5}}, {"i": 3, "t": 118.7, "tool": "source_photo", "args": {}}, {"i": 4, "t": 139.4, "tool": "set_scale", "args": {"factor": 1.38}}, {"i": 5, "t": 140.7, "tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}, {"i": 6, "t": 143.7, "tool": "run_probe", "args": {"kind": "rest"}}, {"i": 7, "t": 145.1, "tool": "run_probe", "args": {"kind": "tip"}}, {"i": 8, "t": 165.4, "tool": "set_scale", "args": {"factor": 1.516}}, {"i": 9, "t": 166.5, "tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}, {"i": 10, "t": 169.4, "tool": "run_probe", "args": {"kind": "tip"}}], "agent_edits": [{"tool": "set_scale", "args": {"factor": 1.38}}, {"tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}, {"tool": "set_scale", "args": {"factor": 1.516}}, {"tool": "set_inertial", "args": {"link": "body", "mass": 0.3}}], "diff": "--- cad_mug.as_delivered\n+++ cad_mug.current\n@@ -1,6 +1,8 @@\n {\n- \"scale\": 1.0,\n- \"override\": null,\n+ \"scale\": 1.516,\n+ \"override\": {\n+ \"mass\": 0.3\n+ },\n \"parts\": [\n {\n \"name\": \"body\",\n@@ -12,4 +14,4 @@\n }\n ]\n }\n-<inertial pos=\"0.0025 -0.0000 0.0259\" mass=\"0.2033\" fullinertia=\"2.1454e-04 2.4361e-04 3.1080e-04 -5.9143e-09 -3.0714e-06 -2.0930e-09\"/>\n+<inertial pos=\"0.0038 -0.0000 0.0392\" mass=\"0.3000\" fullinertia=\"7.2757e-04 8.2615e-04 1.0540e-03 -2.0057e-08 -1.0416e-05 -7.0980e-09\"/>\n", "duration_s": 194.6, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/cad_mug", "version": 3, "metadata": {"object": "cad_mug", "kind": "mesh", "label": "mug", "passed": true, "acceptance": {"height": true, "mass": true, "cavity-open": true, "rests-upright": true}, "agent_edits": 4, "approval_note": "Looks and feels like the real one now."}}}
|
| 6 |
+
{"id": "contributor-rcad-cupboard-c4", "task": "contributor-rcad-cupboard", "object": "rcad_cupboard", "model": "claude-sonnet-5-5", "contributor": "scripts/contributor.py, over the page's HTTP API", "video": null, "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "all-joints-move", "result": true, "description": "every door or drawer reaches 90% of its travel; stuck: none"}, {"id": "within-limits", "result": true, "description": "no joint overshoots its limit by more than 15%; overshooting: none"}], "chat": [{"i": 1, "t": 39.9, "from": "contributor", "text": "One of the lower doors on the kitchen cupboard won't open, and the one next to it sticks partway."}, {"i": 2, "t": 75.9, "from": "agent", "text": "Both doors now open fully. The cause was self-collision, so I switched it off. That is a blunt fix, and you should know what it costs.\n\n- **Cause:** the doors were colliding with each other. `doorWhole_1R` stalled at 75% and `doorWhole_2L` didn't move (it ended at -5%). They are the two lower doors that sit next to each other. The other six doors opened fully.\n- **Change:** I turned self-collision off for the object.\n- **Probe:** all 8 hinges now reach 100% of their target.\n- **Trade-off:** the doors can now pass through each other and the frame. I can only switch this on or off for the whole object. I can't exempt just those two doors.\n\nPlease try opening all the doors again. Then tell me whether the real doors swing clear of each other, or whether these two touch or overlap on the real cupboard. If they do touch, the stall may be a real overlap in the CAD boxes. In that case I'd rather turn self-collision back on and leave those two doors as they are."}, {"i": 3, "t": 88.9, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 31.5, "action": "look", "summary": "Looked at the kitchen cupboard.", "object_edits": 0}, {"i": 2, "t": 39.9, "action": "open", "summary": "6 of 8 doors and drawers open fully; doorWhole_1R_hinge gets only 75% of the way, doorWhole_2L_hinge gets only 0% of the way.", "object_edits": 0}, {"i": 3, "t": 83.1, "action": "open", "summary": "Every door and drawer (8) opens fully.", "object_edits": 1}, {"i": 4, "t": 88.9, "action": "look", "summary": "Looked at the kitchen cupboard.", "object_edits": 1}], "agent_calls": [{"i": 1, "t": 48.0, "tool": "inspect", "args": {}}, {"i": 2, "t": 48.0, "tool": "last_interaction", "args": {"count": 3}}, {"i": 3, "t": 55.1, "tool": "run_probe", "args": {"kind": "joints"}}, {"i": 4, "t": 62.3, "tool": "render", "args": {}}, {"i": 5, "t": 62.3, "tool": "set_self_collision", "args": {"enabled": false}}, {"i": 6, "t": 70.2, "tool": "run_probe", "args": {"kind": "joints"}}], "agent_edits": [{"tool": "set_self_collision", "args": {"enabled": false}}], "diff": "--- rcad_cupboard.as_delivered\n+++ rcad_cupboard.current\n@@ -1,5 +1,5 @@\n {\n \"damping\": {},\n \"frictionloss\": {},\n- \"self_collision\": true\n+ \"self_collision\": false\n }\n", "duration_s": 102.8, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/rcad_cupboard", "version": 1, "metadata": {"object": "rcad_cupboard", "kind": "urdf", "label": "kitchen cupboard", "passed": true, "acceptance": {"all-joints-move": true, "within-limits": true}, "agent_edits": 1, "approval_note": "Looks and feels like the real one now."}}}
|
| 7 |
+
{"id": "contributor-rcad-cupboard-r3", "task": "contributor-rcad-cupboard", "object": "rcad_cupboard", "model": "claude-sonnet-5-5", "contributor": "scripts/record_session.py, through the page in Chrome (recorded)", "video": "videos/rcad_cupboard.mp4", "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "all-joints-move", "result": true, "description": "every door or drawer reaches 90% of its travel; stuck: none"}, {"id": "within-limits", "result": true, "description": "no joint overshoots its limit by more than 15%; overshooting: none"}], "chat": [{"i": 1, "t": 100.8, "from": "contributor", "text": "One of the lower doors on the kitchen cupboard won't open, and the one next to it sticks partway."}, {"i": 2, "t": 146.6, "from": "agent", "text": "Both doors are fixed. With self-collision off, all 8 doors now open fully, so I'm confident about the cause.\n\n**Cause:** The doors were colliding with each other. `doorWhole_1R` and `doorWhole_2L` sit next to each other, and their collision boxes from the URDF overlap. They jam as they swing, so `2L` never moves and `1R` stops at 75%. I can't edit the collision boxes, and the joint limits, damping and friction are all fine.\n\n**Change:** I turned self-collision off for this object. Collisions with the world are unaffected. Before, 6 of 8 doors reached the target. Now all 8 reach 100%.\n\n**Side effect:** Doors can now pass through each other and the frame. For a real cupboard that's rarely visible, because the doors open outward in separate arcs.\n\n**Please try:**\n- Open all the doors again and check that the two lower doors swing fully.\n- Confirm the opening motion looks right to you.\n\nAlso, each door is set to 8 kg and the carcass to 70 kg, and 9 links still have placeholder inertia. If you know the real door weight, tell me and I'll set it. A door this size is usually a few kg."}, {"i": 3, "t": 172.4, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 86.4, "action": "look", "summary": "Looked at the kitchen cupboard.", "object_edits": 0}, {"i": 2, "t": 96.6, "action": "open", "summary": "6 of 8 doors and drawers open fully; doorWhole_1R_hinge gets only 75% of the way, doorWhole_2L_hinge gets only 0% of the way.", "object_edits": 0}, {"i": 3, "t": 159.9, "action": "open", "summary": "Every door and drawer (8) opens fully.", "object_edits": 1}, {"i": 4, "t": 168.9, "action": "look", "summary": "Looked at the kitchen cupboard.", "object_edits": 1}], "agent_calls": [{"i": 1, "t": 108.5, "tool": "inspect", "args": {}}, {"i": 2, "t": 108.6, "tool": "last_interaction", "args": {"count": 3}}, {"i": 3, "t": 116.0, "tool": "run_probe", "args": {"kind": "joints"}}, {"i": 4, "t": 124.3, "tool": "render", "args": {}}, {"i": 5, "t": 124.4, "tool": "set_self_collision", "args": {"enabled": false}}, {"i": 6, "t": 138.6, "tool": "run_probe", "args": {"kind": "joints"}}], "agent_edits": [{"tool": "set_self_collision", "args": {"enabled": false}}], "diff": "--- rcad_cupboard.as_delivered\n+++ rcad_cupboard.current\n@@ -1,5 +1,5 @@\n {\n \"damping\": {},\n \"frictionloss\": {},\n- \"self_collision\": true\n+ \"self_collision\": false\n }\n", "duration_s": 187.0, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/rcad_cupboard", "version": 2, "metadata": {"object": "rcad_cupboard", "kind": "urdf", "label": "kitchen cupboard", "passed": true, "acceptance": {"all-joints-move": true, "within-limits": true}, "agent_edits": 1, "approval_note": "Looks and feels like the real one now."}}}
|
| 8 |
+
{"id": "contributor-scan-mug-c5", "task": "contributor-scan-mug", "object": "scan_mug", "model": "claude-sonnet-5-5", "contributor": "scripts/contributor.py, over the page's HTTP API", "video": null, "status": "approved", "score": 1.0, "passed": true, "checks": [{"id": "mass", "result": true, "description": "mass within 0.3-0.45 kg for a real mug; got 0.338 kg"}, {"id": "cavity-open", "result": true, "description": "the opening holds dropped objects; 5 of 5 spheres inside"}, {"id": "rests-upright", "result": true, "description": "rests upright on a flat bench; tilt 0.64 deg, speed 0.0002"}, {"id": "not-top-heavy", "result": true, "description": "stays put on a tilt table up to 20 deg; first topple at 25"}], "chat": [{"i": 1, "t": 17.5, "from": "contributor", "text": "This mug weighs a ton when I lift it, like it's full of sand."}, {"i": 2, "t": 30.6, "from": "agent", "text": "The mug was too heavy because it was treated as solid water-density material. The loader had no mass data, so it filled every part with 1000 kg/m\u00b3, as if the mug were solid. That gave 1.25 kg.\n\nWhat I changed:\n- **Material:** I set the body to ceramic (2300 kg/m\u00b3).\n- **Wall:** I made the body a hollow shell with a 4 mm wall, which is typical for a mug. A solid ceramic body would have weighed 0.70 kg, which is still too heavy.\n- **Result:** The mug now weighs **0.34 kg**, and the centre of mass sits a bit lower and nearer the middle. It rests stably in the rest probe.\n\nTry lifting it again. A real 16 oz ceramic mug usually weighs about 300\u2013450 g. If yours is on a scale, tell me its weight and I'll adjust the wall thickness to match. Otherwise, let me know if it feels right and you're happy to approve it."}, {"i": 3, "t": 35.4, "from": "system", "text": "The contributor approved the object: Looks and feels like the real one now."}], "contributor_actions": [{"i": 1, "t": 17.0, "action": "look", "summary": "Looked at the mug.", "object_edits": 0}, {"i": 2, "t": 17.4, "action": "lift", "summary": "It weighs 1.25 kg, about as heavy as a 1 L carton of milk. It stands 13.4 cm tall and is 12.5 cm by 8.9 cm across.", "object_edits": 0}, {"i": 3, "t": 31.9, "action": "lift", "summary": "It weighs 0.34 kg, about as heavy as a can of soda. It stands 13.4 cm tall and is 12.5 cm by 8.9 cm across.", "object_edits": 2}, {"i": 4, "t": 33.3, "action": "lean", "summary": "On a slowly tilting table it tips over at 25\u00b0.", "object_edits": 2}, {"i": 5, "t": 35.0, "action": "fill", "summary": "5 of 5 marbles dropped into it stay inside.", "object_edits": 2}, {"i": 6, "t": 35.4, "action": "look", "summary": "Looked at the mug.", "object_edits": 2}], "agent_calls": [{"i": 1, "t": 20.0, "tool": "inspect", "args": {}}, {"i": 2, "t": 20.2, "tool": "last_interaction", "args": {"count": 1}}, {"i": 3, "t": 23.4, "tool": "set_material", "args": {"part": "body", "material": "ceramic"}}, {"i": 4, "t": 23.7, "tool": "set_shell", "args": {"part": "body", "thickness": 0.004}}, {"i": 5, "t": 25.6, "tool": "run_probe", "args": {"kind": "rest"}}], "agent_edits": [{"tool": "set_material", "args": {"part": "body", "material": "ceramic"}}, {"tool": "set_shell", "args": {"part": "body", "thickness": 0.004}}], "diff": "--- scan_mug.as_delivered\n+++ scan_mug.current\n@@ -1,18 +1,15 @@\n {\n \"scale\": 1.0,\n- \"override\": {\n- \"mass\": 1.2519,\n- \"source\": \"as loaded: no inertial in the file, density 1000 over every geom\"\n- },\n+ \"override\": null,\n \"parts\": [\n {\n \"name\": \"body\",\n- \"material\": \"unspecified\",\n- \"density\": 1000.0,\n- \"mode\": \"solid\",\n- \"thickness\": null,\n+ \"material\": \"ceramic\",\n+ \"density\": 2300.0,\n+ \"mode\": \"shell\",\n+ \"thickness\": 0.004,\n \"removed\": null\n }\n ]\n }\n-<inertial pos=\"-0.0123 -0.0004 0.0626\" mass=\"1.2519\" fullinertia=\"2.7726e-03 3.1121e-03 1.7421e-03 3.3449e-05 -1.5025e-04 2.4084e-05\"/>\n+<inertial pos=\"-0.0129 -0.0005 0.0671\" mass=\"0.3382\" fullinertia=\"7.6331e-04 8.5621e-04 5.1921e-04 -2.6496e-06 -1.7187e-05 1.6653e-06\"/>\n", "duration_s": 40.2, "sim_asset": {"id": "@local/genesis-workbench/sim-assets/scan_mug", "version": 1, "metadata": {"object": "scan_mug", "kind": "mesh", "label": "mug", "passed": true, "acceptance": {"mass": true, "cavity-open": true, "rests-upright": true, "not-top-heavy": true}, "agent_edits": 2, "approval_note": "Looks and feels like the real one now."}}}
|
videos/cad_milk_frother.mp4
ADDED
|
@@ -0,0 +1,3 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
version https://git-lfs.github.com/spec/v1
|
| 2 |
+
oid sha256:481608c9ca8a39f77f55c0bb466d2c173da0632e9dd05f29ba32dc2bea62b146
|
| 3 |
+
size 872522
|
videos/cad_mug.mp4
ADDED
|
@@ -0,0 +1,3 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
version https://git-lfs.github.com/spec/v1
|
| 2 |
+
oid sha256:714be366b634f08cf4a42cbe446326b8a52a6c2de8275348ec59d4506231f5a8
|
| 3 |
+
size 1432455
|
videos/rcad_cupboard.mp4
ADDED
|
@@ -0,0 +1,3 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
version https://git-lfs.github.com/spec/v1
|
| 2 |
+
oid sha256:2c9e34cb86e97667f564c5759660bcf7d8c523c0241fdfa0388ed7fe75e0f17d
|
| 3 |
+
size 1102173
|