Blame for v2/test.jsonl

{"intent": "apply ACL Edge_Security_Policy_24 to vlan 240 ingress", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "configure access-list Edge_Security_Policy_24 vlan Vlan-ID-240 ingress", "source": "corpus", "command_original": "configure access-list Edge_Security_Policy_24 vlan Vlan-ID-240 ingress"}
{"intent": "show IPv6 BGP peers with AS path regex", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "show ipv6 bgp peers addr ROUTE regexp as_paths [VRF_INST]", "source": "corpus", "command_original": "show ipv6 bgp peers addr ROUTE regexp as_paths [VRF_INST]"}
{"intent": "add static route 172.16.125.0/24 via 10.1.1.125", "vendor": "Nokia", "os": "srlinux", "category": "Routing", "command": "set network-instance default static-routes route 172.16.125.0/24 next-hop 10.1.1.125", "source": "corpus", "command_original": "set network-instance default static-routes route 172.16.125.0/24 next-hop 10.1.1.125"}
{"intent": "add swp13 to ospf area 0.0.0.0", "vendor": "NVIDIA", "os": "nvue", "category": "OSPF", "command": "nv set vrfs default router ospf area 0.0.0.0 member swp13", "source": "corpus", "command_original": "nv set vrfs default router ospf area 0.0.0.0 member swp13"}
{"intent": "enter ospf process 1 configuration", "vendor": "Aruba", "os": "aoscx", "category": "Protocols", "command": "router ospf 1", "source": "corpus", "command_original": "router ospf 1"}
{"intent": "set babel interface type", "vendor": "FRR", "os": "frr", "category": "System", "command": "babel <wired|wireless>", "source": "corpus", "command_original": "babel <wired|wireless>"}
{"intent": "enable dhcp on ethernet 1 ipv4", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"Ethernet 1\" -AddressFamily IPv4 -Dhcp Enabled", "source": "corpus", "command_original": "Set-NetIPInterface -InterfaceAlias \"Ethernet 1\" -AddressFamily IPv4 -Dhcp Enabled"}
{"intent": "enable ISIS LDP synchronization", "vendor": "VyOS", "os": "vyos", "category": "ISIS", "command": "set protocols isis ldp-sync", "source": "corpus", "command_original": "set protocols isis ldp-sync"}
{"intent": "add IP address to vlan-270 interface", "vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/ip address add address=192.168.27.1/24 interface=vlan-270 network=192.168.27.0", "source": "corpus", "command_original": "/ip address add address=192.168.27.1/24 interface=vlan-270 network=192.168.27.0"}
{"intent": "create network namespace netns_37", "vendor": "Linux", "os": "linux", "category": "System", "command": "ip netns add netns_37", "source": "corpus", "command_original": "ip netns add netns_37"}
{"intent": "configure VRRP group 4 with preempt on ge-0/0/4", "vendor": "Juniper", "os": "junos", "category": "HA", "command": "set interfaces ge-0/0/4 unit 0 family inet address 10.4.1.2/24 vrrp-group 4 preempt", "source": "corpus", "command_original": "set interfaces ge-0/0/4 unit 0 family inet address 10.4.1.2/24 vrrp-group 4 preempt"}
{"intent": "set hostname to Core", "vendor": "Cisco", "os": "ios", "category": "VLAN", "command": "hostname Core", "source": "corpus", "command_original": "hostname Core"}
{"intent": "enable DHCP server on subinterface", "vendor": "Nokia", "os": "srlinux", "category": "DHCP", "command": "set interface description subinterface type ipv4 admin-state dhcp-server admin-state", "source": "corpus", "command_original": "set interface description subinterface type ipv4 admin-state dhcp-server admin-state"}
{"intent": "enable DHCP on LAN 3 IPv4", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"LAN 3\" -AddressFamily IPv4 -Dhcp Enabled", "source": "corpus", "command_original": "Set-NetIPInterface -InterfaceAlias \"LAN 3\" -AddressFamily IPv4 -Dhcp Enabled"}
{"intent": "capture UDP port 67 on wlan1", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"udp port 67\"", "source": "corpus", "command_original": "tshark -i wlan1 -f \"udp port 67\""}
{"intent": "perform inservice software upgrade", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request system software inservice-upgrade (Maintenance)", "source": "corpus", "command_original": "request system software inservice-upgrade (Maintenance)"}
{"intent": "add static route 172.16.19.0/24", "vendor": "Huawei", "os": "vrp", "category": "Routing", "command": "ip route-static 172.16.19.0 255.255.255.0 10.255.1.19", "source": "corpus", "command_original": "ip route-static 172.16.19.0 255.255.255.0 10.255.1.19"}
{"intent": "set netflow transport responder port", "vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "collect transport responder port", "source": "corpus", "command_original": "collect transport responder port"}
{"intent": "clear ss7 sm statistics", "vendor": "Cisco", "os": "ios", "category": "Protocols", "command": "clear ss7 sm-stats", "source": "corpus", "command_original": "clear ss7 sm-stats"}
{"intent": "Configure MLAG peer 2 IP address", "vendor": "Extreme", "os": "exos", "category": "HA", "command": "configure mlag peer MLAG_Virtual_Peer_2 ipaddress 10.255.250.2", "source": "corpus", "command_original": "configure mlag peer MLAG_Virtual_Peer_2 ipaddress 10.255.250.2"}
{"intent": "configure ipv6 neighbor-discovery on subinterface", "vendor": "Nokia", "os": "srlinux", "category": "BGP", "command": "set interface description subinterface type ipv6 admin-state neighbor-discovery", "source": "corpus", "command_original": "set interface description subinterface type ipv6 admin-state neighbor-discovery"}
{"intent": "add IP 192.168.114.10/24 to eth2", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip addr add 192.168.114.10/24 dev eth2", "source": "corpus", "command_original": "ip addr add 192.168.114.10/24 dev eth2"}
{"intent": "create admin-5 user with administrator group", "vendor": "Aruba", "os": "aoscx", "category": "System", "command": "user admin-5 group administrators password plaintextpwd123", "source": "corpus", "command_original": "user admin-5 group administrators password plaintextpwd123"}
{"intent": "accept forward from 192.168.13.0/24 to 10.0.0.13", "vendor": "Linux", "os": "linux", "category": "Security", "command": "iptables -A FORWARD -s 192.168.13.0/24 -d 10.0.0.13 -j ACCEPT", "source": "corpus", "command_original": "iptables -A FORWARD -s 192.168.13.0/24 -d 10.0.0.13 -j ACCEPT"}
{"intent": "capture ARP packets on lo to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"arp\" -w /tmp/capture_lo_arp.pcapng", "source": "corpus", "command_original": "tshark -i lo -f \"arp\" -w /tmp/capture_lo_arp.pcapng"}
{"intent": "create user ro-viewer-read with read group", "vendor": "Mikrotik", "os": "routeros", "category": "System", "command": "/user add name=ro-viewer-read group=read password=plaintextpwd123", "source": "corpus", "command_original": "/user add name=ro-viewer-read group=read password=plaintextpwd123"}
{"intent": "capture arp on wlan1 to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"arp\" -w /tmp/capture_wlan1_arp.pcapng", "source": "corpus", "command_original": "tshark -i wlan1 -f \"arp\" -w /tmp/capture_wlan1_arp.pcapng"}
{"intent": "set vlan 510 description on default bridge", "vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain default vlan 510 description Vlan-Segment-ID-510", "source": "corpus", "command_original": "nv set bridge domain default vlan 510 description Vlan-Segment-ID-510"}
{"intent": "add static route for 172.16.83.0/24 via 10.255.1.83", "vendor": "Aruba", "os": "aoscx", "category": "Routing", "command": "ip route 172.16.83.0/24 10.255.1.83", "source": "corpus", "command_original": "ip route 172.16.83.0/24 10.255.1.83"}
{"intent": "show OSPF interface details", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ip ospf interface [INTERFACE] [json]", "source": "corpus", "command_original": "show ip ospf interface [INTERFACE] [json]"}
{"intent": "show last 10 lines of all messages log", "vendor": "Juniper", "os": "junos", "category": "Troubleshooting", "command": "show log all-messages | last 10", "source": "corpus", "command_original": "show log all-messages | last 10"}
{"intent": "create VLAN 153", "vendor": "Huawei", "os": "vrp", "category": "Interfaces", "command": "vlan 153", "source": "corpus", "command_original": "[Huawei] vlan 153"}
{"intent": "create DHCP scope for 192.168.38.0/24", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Add-DhcpServerv4Scope -Name \"Scope-Net-38\" -StartRange 192.168.38.100 -EndRange 192.168.38.200 -SubnetMask 255.255.255.0", "source": "corpus", "command_original": "Add-DhcpServerv4Scope -Name \"Scope-Net-38\" -StartRange 192.168.38.100 -EndRange 192.168.38.200 -SubnetMask 255.255.255.0"}
{"intent": "add swp44 as untagged member of VLAN 440", "vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain default vlan 440 untagged member interface swp44", "source": "corpus", "command_original": "nv set bridge domain default vlan 440 untagged member interface swp44"}
{"intent": "assign IP address 10.19.1.1/24 to swp19", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp19 ip address 10.19.1.1/24", "source": "corpus", "command_original": "nv set interface swp19 ip address 10.19.1.1/24"}
{"intent": "display IPv4 settings for LAN 3 interface", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPInterface -InterfaceAlias \"LAN 3\" -AddressFamily IPv4", "source": "corpus", "command_original": "Get-NetIPInterface -InterfaceAlias \"LAN 3\" -AddressFamily IPv4"}
{"intent": "capture dhcp traffic on loopback to pcap", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"port 67\" -w /tmp/capture_lo_port_67.pcapng", "source": "corpus", "command_original": "tshark -i lo -f \"port 67\" -w /tmp/capture_lo_port_67.pcapng"}
{"intent": "enter configuration mode with command", "vendor": "Juniper", "os": "junos", "category": "System", "command": "configure command:", "source": "corpus", "command_original": "configure command:"}
{"intent": "configure pki enrollment profile", "vendor": "Cisco", "os": "ios", "category": "Security", "command": "crypto pki profile enrollment", "source": "corpus", "command_original": "crypto pki profile enrollment"}
{"intent": "add forward chain filter to drop subnet", "vendor": "Mikrotik", "os": "routeros", "category": "ACL", "command": "/ip firewall filter add chain=forward action=drop src-address=192.168.140.0/24 comment=\"Filter rules for subnet 140\"", "source": "corpus", "command_original": "/ip firewall filter add chain=forward action=drop src-address=192.168.140.0/24 comment=\"Filter rules for subnet 140\""}
{"intent": "load and merge template from ftp", "vendor": "Juniper", "os": "junos", "category": "System", "command": "load merge ftp://user:password@server/junos/templates/common-template", "source": "corpus", "command_original": "load merge ftp://user:password@server/junos/templates/common-template"}
{"intent": "capture snmp trap traffic on wlan1", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"port 162\" -w /tmp/capture_wlan1_port_162.pcapng", "source": "corpus", "command_original": "tshark -i wlan1 -f \"port 162\" -w /tmp/capture_wlan1_port_162.pcapng"}
{"intent": "create dhcp pool 192.168.83.10-192.168.83.100", "vendor": "Mikrotik", "os": "routeros", "category": "DHCP", "command": "/ip pool add name=dhcp-pool-83 ranges=192.168.83.10-192.168.83.100", "source": "corpus", "command_original": "/ip pool add name=dhcp-pool-83 ranges=192.168.83.10-192.168.83.100"}
{"intent": "show DHCPv4 scopes for 192.168.15.0", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Get-DhcpServerv4Scope -ScopeId 192.168.15.0", "source": "corpus", "command_original": "Get-DhcpServerv4Scope -ScopeId 192.168.15.0"}
{"intent": "show ip addresses on Ethernet 76", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPAddress -InterfaceAlias \"Ethernet 76\"", "source": "corpus", "command_original": "Get-NetIPAddress -InterfaceAlias \"Ethernet 76\""}
{"intent": "create vlan 58 subinterface on eth0", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip link add link eth0 name eth0.58 type vlan id 58", "source": "corpus", "command_original": "ip link add link eth0 name eth0.58 type vlan id 58"}
{"intent": "add ip address to Ethernet 37 interface", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "New-NetIPAddress -InterfaceAlias \"Ethernet 37\" -IPAddress 192.168.37.10 -PrefixLength 24 -DefaultGateway 192.168.37.1", "source": "corpus", "command_original": "New-NetIPAddress -InterfaceAlias \"Ethernet 37\" -IPAddress 192.168.37.10 -PrefixLength 24 -DefaultGateway 192.168.37.1"}
{"intent": "show ip igmp joins", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ip igmp [vrf NAME] join [json]", "source": "corpus", "command_original": "show ip igmp [vrf NAME] join [json]"}
{"intent": "show specific vlan ids", "vendor": "Cisco", "os": "ios", "category": "VLAN", "command": "show vlan id 1-4,3,7,5-20", "source": "corpus", "command_original": "show vlan id 1-4,3,7,5-20"}
{"intent": "capture host 192.168.45.1 to pcap", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "tcpdump -i any -n -w /tmp/dump_45.pcap \"ip host 192.168.45.1\"", "source": "corpus", "command_original": "tcpdump -i any -n -w /tmp/dump_45.pcap \"ip host 192.168.45.1\""}
{"intent": "display UDP port 145", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "udp.port == 145", "source": "corpus", "command_original": "udp.port == 145"}
{"intent": "Show BGP for specific VRF", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "show ip bgp vrf [vrf_name | all | default]", "source": "corpus", "command_original": "show ip bgp vrf [vrf_name | all | default]"}
{"intent": "Capture HTTPS traffic on docker0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"port 443\"", "source": "corpus", "command_original": "tshark -i docker0 -f \"port 443\""}
{"intent": "Configure SNMP user add or delete", "vendor": "SONiC", "os": "sonic", "category": "SNMP", "command": "config snmp user add/del", "source": "corpus", "command_original": "config snmp user add/del"}
{"intent": "Force specific VRF context", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "force vrf <name>", "source": "corpus", "command_original": "force vrf <name>"}
{"intent": "show evpn ethernet-segment evi for specific vni", "vendor": "FRR", "os": "frr", "category": "EVPN", "command": "show evpn es-evi [vni (1-16777215)] [detail] [json]", "source": "corpus", "command_original": "show evpn es-evi [vni (1-16777215)] [detail] [json]"}
{"intent": "match invalid command in route map", "vendor": "Cisco", "os": "ios", "category": "Security", "command": "match invalid-command", "source": "corpus", "command_original": "match invalid-command"}
{"intent": "remove route to 10.0.107.0/24", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Remove-NetRoute -DestinationPrefix 10.0.107.0/24 -Confirm:$false", "source": "corpus", "command_original": "Remove-NetRoute -DestinationPrefix 10.0.107.0/24 -Confirm:$false"}
{"intent": "configure syslog server 192.168.10.15", "vendor": "PAN-OS", "os": "panos", "category": "Logging", "command": "set shared log-settings syslog Syslog_Profile server Syslog_Server15 server 192.168.10.15 port 514", "source": "corpus", "command_original": "set shared log-settings syslog Syslog_Profile server Syslog_Server15 server 192.168.10.15 port 514"}
{"intent": "add static route 172.16.12.0/24 via 10.255.0.2", "vendor": "NVIDIA", "os": "nvue", "category": "Routing", "command": "nv set vrfs default router static route 172.16.12.0/24 via 10.255.0.2", "source": "corpus", "command_original": "nv set vrfs default router static route 172.16.12.0/24 via 10.255.0.2"}
{"intent": "set policy term then metric to 50", "vendor": "Juniper", "os": "junos", "category": "BGP", "command": "set policy-options policy-statement EXPORT-BGP-POLICY-9 term Matchterm then metric 50", "source": "corpus", "command_original": "set policy-options policy-statement EXPORT-BGP-POLICY-9 term Matchterm then metric 50"}
{"intent": "set shell login banner message", "vendor": "Huawei", "os": "vrp", "category": "VLAN", "command": "header shell \"Unauthorized access is prohibited on Huawei router!\"", "source": "corpus", "command_original": "header shell \"Unauthorized access is prohibited on Huawei router!\""}
{"intent": "resolve dns name to A record", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Resolve-DnsName -Name \"domain-node28.internal.lan\" -Type A", "source": "corpus", "command_original": "Resolve-DnsName -Name \"domain-node28.internal.lan\" -Type A"}
{"intent": "set HAProxy check timeout in seconds", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set load-balancing haproxy timeout check <seconds>", "source": "corpus", "command_original": "set load-balancing haproxy timeout check <seconds>"}
{"intent": "capture DNS traffic on loopback", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"port 53\"", "source": "corpus", "command_original": "tshark -i lo -f \"port 53\""}
{"intent": "configure register checksum full", "vendor": "Arista", "os": "eos", "category": "Multicast", "command": "register checksum [full | header]", "source": "corpus", "command_original": "register checksum [full | header]"}
{"intent": "enable console port", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config console enable", "source": "corpus", "command_original": "config console enable"}
{"intent": "enable admin user", "vendor": "Nokia", "os": "sros", "category": "Misc", "command": "enable-admin", "source": "corpus", "command_original": "enable-admin"}
{"intent": "add port 1:14 to mlag peer", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure mlag peer MLAG_Virtual_Peer_14 member port 1:14", "source": "corpus", "command_original": "configure mlag peer MLAG_Virtual_Peer_14 member port 1:14"}
{"intent": "show rib ipv6 routes", "vendor": "Arista", "os": "eos", "category": "System", "command": "show rib route ipv6 [vrf vrf_name] [PREFIX][ROUTE TYPE]", "source": "corpus", "command_original": "show rib route ipv6 [vrf vrf_name] [PREFIX][ROUTE TYPE]"}
{"intent": "assign IP address 192.168.35.1/24 to VLAN 350", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface vlan350 ip address 192.168.35.1/24", "source": "corpus", "command_original": "nv set interface vlan350 ip address 192.168.35.1/24"}
{"intent": "ping 192.168.11.1 with 1472 byte packets", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ping -c 5 -i 0.2 -s 1472 192.168.11.1", "source": "corpus", "command_original": "ping -c 5 -i 0.2 -s 1472 192.168.11.1"}
{"intent": "enable TI-LFA SRLG strict fast reroute", "vendor": "Arista", "os": "eos", "category": "Routing", "command": "fast-reroute ti-lfa srlg [strict]", "source": "corpus", "command_original": "fast-reroute ti-lfa srlg [strict]"}
{"intent": "show IDP JIST package version", "vendor": "Juniper", "os": "junos", "category": "Firewall", "command": "show security idp jist-packageversion", "source": "corpus", "command_original": "show security idp jist-packageversion"}
{"intent": "enable DHCP on Wi-Fi interface", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"Wi-Fi 17\" -AddressFamily IPv4 -Dhcp Enabled", "source": "corpus", "command_original": "Set-NetIPInterface -InterfaceAlias \"Wi-Fi 17\" -AddressFamily IPv4 -Dhcp Enabled"}
{"intent": "delay execution by seconds", "vendor": "Arista", "os": "eos", "category": "System", "command": "delay seconds", "source": "corpus", "command_original": "delay seconds"}
{"intent": "show SNMP users", "vendor": "Arista", "os": "eos", "category": "SNMP", "command": "show snmp user [USER_LIST]", "source": "corpus", "command_original": "show snmp user [USER_LIST]"}
{"intent": "enter BGP router configuration", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "router bgp num", "source": "corpus", "command_original": "router bgp num"}
{"intent": "set port 5:3 to full duplex", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure ports 5:3 duplex full", "source": "corpus", "command_original": "configure ports 5:3 duplex full"}
{"intent": "show SNMP community configuration", "vendor": "SONiC", "os": "sonic", "category": "SNMP", "command": "show runningconfiguration snmp community", "source": "corpus", "command_original": "show runningconfiguration snmp community"}
{"intent": "Capture DHCP traffic on any interface to file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i any -f \"port 68\" -w /tmp/capture_any_port_68.pcapng", "source": "corpus", "command_original": "tshark -i any -f \"port 68\" -w /tmp/capture_any_port_68.pcapng"}
{"intent": "Enable IP routing on VLAN 460", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "enable iprouting vlan Vlan-ID-460", "source": "corpus", "command_original": "enable iprouting vlan Vlan-ID-460"}
{"intent": "Show SNMP agent listening addresses", "vendor": "SONiC", "os": "sonic", "category": "Troubleshooting", "command": "show snmpagentaddress", "source": "corpus", "command_original": "show snmpagentaddress"}
{"intent": "capture port 162 on bridge br0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i br0 -f \"port 162\" -w /tmp/capture_br0_port_162.pcapng", "source": "corpus", "command_original": "tshark -i br0 -f \"port 162\" -w /tmp/capture_br0_port_162.pcapng"}
{"intent": "delete ip rule for 192.168.52.0/24 table 152", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ip rule del from 192.168.52.0/24 table 152", "source": "corpus", "command_original": "ip rule del from 192.168.52.0/24 table 152"}
{"intent": "add forward chain rule for 192.168.76.0/24", "vendor": "Mikrotik", "os": "routeros", "category": "ACL", "command": "/ip firewall filter add chain=forward action=accept src-address=192.168.76.0/24 comment=\"Filter rules for subnet 76\"", "source": "corpus", "command_original": "/ip firewall filter add chain=forward action=accept src-address=192.168.76.0/24 comment=\"Filter rules for subnet 76\""}
{"intent": "create ip vrf vrf-cust-2", "vendor": "Nokia", "os": "srlinux", "category": "EVPN", "command": "set network-instance vrf-cust-2 type ip-vrf admin-state enable", "source": "corpus", "command_original": "set network-instance vrf-cust-2 type ip-vrf admin-state enable"}
{"intent": "capture DHCP traffic on en1 to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en1 -f \"port 67\" -w /tmp/capture_en1_port_67.pcapng", "source": "corpus", "command_original": "tshark -i en1 -f \"port 67\" -w /tmp/capture_en1_port_67.pcapng"}
{"intent": "create VLAN 460 on bridge-vlan-1", "vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/interface vlan add name=vlan-460 vlan-id=460 interface=bridge-vlan-1", "source": "corpus", "command_original": "/interface vlan add name=vlan-460 vlan-id=460 interface=bridge-vlan-1"}
{"intent": "show BGP routes for 10. 192.168 and 172.16", "vendor": "Juniper", "os": "junos", "category": "BGP", "command": "show route protocol bgp terse | match 10\\.| 192.168| 172.16.*.*/*", "source": "corpus", "command_original": "show route protocol bgp terse | match 10\\.| 192.168| 172.16.*.*/*"}
{"intent": "set Management 37 MTU to 6500", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetAdapter -Name \"Management 37\" -MtuSize 6500", "source": "corpus", "command_original": "Set-NetAdapter -Name \"Management 37\" -MtuSize 6500"}
{"intent": "grant superuser role to operator-20", "vendor": "PAN-OS", "os": "panos", "category": "System", "command": "set mgt-config users operator-20 permissions role-based superuser yes", "source": "corpus", "command_original": "set mgt-config users operator-20 permissions role-based superuser yes"}
{"intent": "add BGP connection to 10.0.0.2 remote-as 65002", "vendor": "Mikrotik", "os": "routeros", "category": "BGP", "command": "/routing bgp connection add name=peer1 as=65001 remote.address=10.0.0.2 remote.as=65002", "source": "curated", "command_original": "/routing bgp connection add name=peer1 as=65001 remote.address=10.0.0.2 remote.as=65002"}
{"intent": "configure OSPF network 10.0.0.0/24 in area 0", "vendor": "Arista", "os": "eos", "category": "OSPF", "command": "router ospf 1\n router-id 1.1.1.1\n network 10.0.0.0/24 area 0", "source": "curated", "command_original": "router ospf 1\n router-id 1.1.1.1\n network 10.0.0.0/24 area 0"}
{"intent": "configure OSPF network 10.0.0.0/24 in area 0", "vendor": "FRR", "os": "frr", "category": "OSPF", "command": "router ospf\n ospf router-id 1.1.1.1\n network 10.0.0.0/24 area 0", "source": "curated", "command_original": "router ospf\n ospf router-id 1.1.1.1\n network 10.0.0.0/24 area 0"}
{"intent": "add OSPF to vlan UNDERLAY in area 0", "vendor": "Extreme", "os": "exos", "category": "OSPF", "command": "enable ospf\nconfigure ospf routerid 1.1.1.1\nconfigure ospf add vlan UNDERLAY area 0.0.0.0", "source": "curated", "command_original": "enable ospf\nconfigure ospf routerid 1.1.1.1\nconfigure ospf add vlan UNDERLAY area 0.0.0.0"}
{"intent": "configure OSPF network 10.0.0.0/24 in area 0", "vendor": "SONiC", "os": "sonic", "category": "OSPF", "command": "router ospf\n ospf router-id 1.1.1.1\n network 10.0.0.0/24 area 0", "source": "curated", "command_original": "router ospf\n ospf router-id 1.1.1.1\n network 10.0.0.0/24 area 0"}
{"intent": "configure interface GigabitEthernet0/0/0 with IP 10.0.0.1/24", "vendor": "Huawei", "os": "vrp", "category": "Interfaces", "command": "interface GigabitEthernet0/0/0\n description UPLINK\n ip address 10.0.0.1 255.255.255.0\n undo shutdown", "source": "curated", "command_original": "interface GigabitEthernet0/0/0\n description UPLINK\n ip address 10.0.0.1 255.255.255.0\n undo shutdown"}
{"intent": "configure interface 1/1/1 with IP 10.0.0.1/24", "vendor": "Aruba", "os": "aoscx", "category": "Interfaces", "command": "interface 1/1/1\n description UPLINK\n no shutdown\n ip address 10.0.0.1/24", "source": "curated", "command_original": "interface 1/1/1\n description UPLINK\n no shutdown\n ip address 10.0.0.1/24"}
{"intent": "create VLAN 10 named USERS", "vendor": "Aruba", "os": "aoscx", "category": "VLAN", "command": "vlan 10\nvlan 10 name USERS", "source": "curated", "command_original": "vlan 10\nvlan 10 name USERS"}
{"intent": "create VLAN 10 with IP 10.10.10.1/24 on port1", "vendor": "FortiOS", "os": "fortios", "category": "VLAN", "command": "config system interface\n edit VLAN10\n  set vdom root\n  set interface port1\n  set type vlan\n  set vlanid 10\n  set ip 10.10.10.1 255.255.255.0\n next\nend", "source": "curated", "command_original": "config system interface\n edit VLAN10\n  set vdom root\n  set interface port1\n  set type vlan\n  set vlanid 10\n  set ip 10.10.10.1 255.255.255.0\n next\nend"}
{"intent": "create LACP lag 1 with description LAG-UPLINK", "vendor": "Aruba", "os": "aoscx", "category": "EtherChannel", "command": "interface lag 1\n description LAG-UPLINK\n no shutdown\n lacp mode active\ninterface 1/1/1\n lag 1", "source": "curated", "command_original": "interface lag 1\n description LAG-UPLINK\n no shutdown\n lacp mode active\ninterface 1/1/1\n lag 1"}
{"intent": "set bfd peer multiplier 3 and bgp neighbor bfd", "vendor": "VyOS", "os": "vyos", "category": "BFD", "command": "set protocols bfd peer 10.0.0.2 interval multiplier 3\nset protocols bgp 65001 neighbor 10.0.0.2 bfd", "source": "curated", "command_original": "set protocols bfd peer 10.0.0.2 interval multiplier 3\nset protocols bgp 65001 neighbor 10.0.0.2 bfd"}
{"intent": "enable bfd on ethernet-1/1.0 and bgp neighbor", "vendor": "Nokia", "os": "srlinux", "category": "BFD", "command": "set / bfd subinterface ethernet-1/1.0 admin-state enable\nset / network-instance default protocols bgp neighbor 10.0.0.2 failure-detection enable-bfd true", "source": "curated", "command_original": "set / bfd subinterface ethernet-1/1.0 admin-state enable\nset / network-instance default protocols bgp neighbor 10.0.0.2 failure-detection enable-bfd true"}
{"intent": "set rstp bridge-priority 4k and edge interface", "vendor": "Juniper", "os": "junos", "category": "Spanning-Tree", "command": "set protocols rstp bridge-priority 4k\nset protocols rstp interface ge-0/0/0 edge", "source": "curated", "command_original": "set protocols rstp bridge-priority 4k\nset protocols rstp interface ge-0/0/0 edge"}
{"intent": "enable rstp with priority 4096", "vendor": "Huawei", "os": "vrp", "category": "Spanning-Tree", "command": "stp enable\nstp mode rstp\nstp priority 4096", "source": "curated", "command_original": "stp enable\nstp mode rstp\nstp priority 4096"}
{"intent": "show IPv4 routing table", "vendor": "Microsoft", "os": "powershell", "category": "Troubleshooting", "command": "Get-NetRoute -AddressFamily IPv4 | Format-Table -AutoSize", "source": "curated", "command_original": "Get-NetRoute -AddressFamily IPv4 | Format-Table -AutoSize"}
{"intent": "show main routing table", "vendor": "Linux", "os": "linux", "category": "Troubleshooting", "command": "ip route show table main", "source": "curated", "command_original": "ip route show table main"}