| %% Parameters for Lithium-Ion Battery Pack cooling example | |
| % Battery cooling example setup and workspace variables | |
| % | |
| % Copyright 2020-2026 The MathWorks, Inc. | |
| % | |
| ambient=300; % Ambient temperature in K | |
| coolantTemp=300; % Coolant inlet temperature in K | |
| initialPackSOC=0.9; % Pack intial SOC (-) | |
| %% Module-to-Module Connections | |
| % Busbar resistances | |
| R12=2e-3; % Module1-to-module2 connection resistance | |
| R23=2e-3; % Module2-to-module3 connection resistance | |
| R34=2e-3; % Module3-to-module4 connection resistance | |
| R45=2e-3; % Module4-to-module5 connection resistance | |
| R56=2e-3; % Module5-to-module6 connection resistance | |
| R67=2e-3; % Module6-to-module7 connection resistance | |
| R78=2e-3; % Module7-to-module8 connection resistance | |
| % ------------------------------------------------------------------------- | |
| %% Lookup Table Points | |
| T_vec=[273.15, 298.15, 323.15]; % Temperature vector T [K] | |
| AH=20; % Cell capacity vector AH(T) [Ahr] | |
| SOC_vec=[0, .25, .75, 1]; % Cell state of charge vector SOC [-] | |
| Flowrate_vec=[0 0.01 0.02 0.03 0.04 0.05]; % Flowrate vector L [kg/s] | |
| lenF=size(Flowrate_vec,2);lenT=size(T_vec,2); % Temporary variables for size | |
| % ------------------------------------------------------------------------- | |
| %% Cell Electrical | |
| V0_mat=[3.2, 3.1, 3.14; 3.25, 3.27, 3.3; 3.28, 3.31, 3.34; 3.33, 3.5, 3.59]; % V0=f(SOC,T), cell OCV [V] | |
| R0_mat=3*[.03, .015, .002; .04, .017, .008; .039, .012, .006; .027, .013, .021]; % R0=f(SOC,T), cell Ohmic Resistance [Ohm] | |
| R1_mat=2*[.089, .076, .01; .042, .022, .099; .019, .007, .002; .051, .043, .029]; % R1=f(SOC,T), cell 1st RC pair Resistance [Ohm] | |
| Tau1_mat=[44, 148, 235; 93, 110, 1000; 19, 27, 133; .5, 22, 3]; % Tau1=f(SOC,T), cell 1st RC pair time constant [s] | |
| R2_mat=2*[.014, .382, .407; .028, .006, .007; .014, .007, .006; .333, .956, .912];% R2=f(SOC,T), cell 2nd RC pair Resistance [Ohm] | |
| Tau2_mat=[1, 44, 5644; 11, 24, 506; 2, 14, 330; 3310, 13419, 30216]; % Tau2=f(SOC,T), cell 2nd RC pair time constant [s] | |
| Ndisc=100;delV0=0;delR0=0;delR1=0;delR2=0;delAH0=0; % No change with cycling, not used in simulation | |
| % ------------------------------------------------------------------------- | |
| %% Cell Thermal | |
| MdotCp=500; % Cell thermal mass (mass times specific heat [J/K]) | |
| K_cell=0.8; % Cell thermal conductivity [W/(m*K)] | |
| h_cell=2; % Heat transfer coefficient to ambient [W/(m^2*K)] | |
| % ------------------------------------------------------------------------- | |
| %% Module Electrical | |
| cell_H=0.20; % Cell height [m] | |
| cell_W=0.12; % Cell width [m] | |
| cell_T=0.02; % Cell thickness [m] | |
| % ------------------------------------------------------------------------- | |
| %% Module 1-8 | |
| % Module 1 | |
| Ns1=12; % Module-1 Number of series connected strings | |
| Np1=3; % Module-1 Number of parallel cells per string | |
| Rext1=1e-3; % Module-1 Accessory total resistance | |
| Q1=5*ones(lenT,lenF,Ns1*Np1); % Module-1 Effective rate of coolant heat transfer from each cell | |
| extQ1=zeros(1,Ns1*Np1); % Module-1 Cell-to-Cell External Heat variation | |
| iniT1=ambient*ones(1,Ns1*Np1); % Module-1 Cell-to-Cell initial Temperature variation | |
| iniSOC1=initialPackSOC*ones(1,Ns1*Np1); % Module-1 Cell-to-Cell initial SOC variation | |
| iniR01=ones(1,Ns1*Np1); % Module-1 Cell-to-Cell Terminal Resistance variation | |
| iniAH1=ones(1,Ns1*Np1); % Module-1 Cell-to-Cell capacity variation vector | |
| % Module 2 - same as Module 1 | |
| Ns2=Ns1; % Module-2 Number of series connected strings | |
| Np2=Np1; % Module-2 Number of parallel cells per string | |
| Rext2=Rext1; % Module-2 Accessory total resistance | |
| Q2=Q1; % Module-2 Effective rate of coolant heat transfer from each cell | |
| extQ2=extQ1; % Module-2 Cell-to-Cell External Heat variation | |
| iniT2=iniT1; % Module-2 Cell-to-Cell initial Temperature variation | |
| iniSOC2=iniSOC1; % Module-2 Cell-to-Cell initial SOC variation | |
| iniR02=iniR01; % Module-2 Cell-to-Cell Terminal Resistance variation | |
| iniAH2=iniAH1; % Module-2 Cell-to-Cell capacity variation vector | |
| % Module 3 - same as Module 1 | |
| Ns3=Ns1; % Module-3 Number of series connected strings | |
| Np3=Np1; % Module-3 Number of parallel cells per string | |
| Rext3=Rext1; % Module-3 Accessory total resistance | |
| Q3=Q1; % Module-3 Effective rate of coolant heat transfer from each cell | |
| extQ3=extQ1; % Module-3 Cell-to-Cell External Heat variation | |
| iniT3=iniT1; % Module-3 Cell-to-Cell initial Temperature variation | |
| iniSOC3=iniSOC1; % Module-3 Cell-to-Cell initial SOC variation | |
| iniR03=iniR01; % Module-3 Cell-to-Cell Terminal Resistance variation | |
| iniAH3=iniAH1; % Module-3 Cell-to-Cell capacity variation vector | |
| % Module 4 | |
| Ns4=16; % Module-4 Number of series connected strings | |
| Np4=3; % Module-4 Number of parallel cells per string | |
| Rext4=1.3e-3; % Module-4 Accessory total resistance | |
| Q4=4.2*ones(lenT,lenF,Ns4*Np4); % Module-4 Effective rate of coolant heat transfer from each cell | |
| extQ4=zeros(1,Ns4*Np4); % Module-4 Cell-to-Cell External Heat variation | |
| iniT4=ambient*ones(1,Ns4*Np4); % Module-4 Cell-to-Cell initial Temperature variation | |
| iniSOC4=initialPackSOC*ones(1,Ns4*Np4); % Module-4 Cell-to-Cell initial SOC variation | |
| iniR04=ones(1,Ns4*Np4); % Module-4 Cell-to-Cell Terminal Resistance variation | |
| iniAH4=ones(1,Ns4*Np4); % Module-4 Cell-to-Cell capacity variation vector | |
| % Module 5 - same as Module 4 | |
| Ns5=Ns4; % Module-5 Number of series connected strings | |
| Np5=Np4; % Module-5 Number of parallel cells per string | |
| Rext5=Rext4; % Module-5 Accessory total resistance | |
| Q5=Q4; % Module-5 Effective rate of coolant heat transfer from each cell | |
| extQ5=extQ4; % Module-5 Cell-to-Cell External Heat variation | |
| iniT5=iniT4; % Module-5 Cell-to-Cell initial Temperature variation | |
| iniSOC5=iniSOC4; % Module-5 Cell-to-Cell initial SOC variation | |
| iniR05=iniR04; % Module-5 Cell-to-Cell Terminal Resistance variation | |
| iniAH5=iniAH4; % Module-5 Cell-to-Cell capacity variation vector | |
| % Module 6 - same as Module 1 | |
| Ns6=Ns1; % Module-6 Number of series connected strings | |
| Np6=Np1; % Module-6 Number of parallel cells per string | |
| Rext6=Rext1; % Module-6 Accessory total resistance | |
| Q6=Q1; % Module-6 Effective rate of coolant heat transfer from each cell | |
| extQ6=extQ1; % Module-6 Cell-to-Cell External Heat variation | |
| iniT6=iniT1; % Module-6 Cell-to-Cell initial Temperature variation | |
| iniSOC6=iniSOC1; % Module-6 Cell-to-Cell initial SOC variation | |
| iniR06=iniR01; % Module-6 Cell-to-Cell Terminal Resistance variation | |
| iniAH6=iniAH1; % Module-6 Cell-to-Cell capacity variation vector | |
| % Module 7 - same as Module 1 | |
| Ns7=Ns1; % Module-7 Number of series connected strings | |
| Np7=Np1; % Module-7 Number of parallel cells per string | |
| Rext7=Rext1; % Module-7 Accessory total resistance | |
| Q7=Q1; % Module-7 Effective rate of coolant heat transfer from each cell | |
| extQ7=extQ1; % Module-7 Cell-to-Cell External Heat variation | |
| iniT7=iniT1; % Module-7 Cell-to-Cell initial Temperature variation | |
| iniSOC7=iniSOC1; % Module-7 Cell-to-Cell initial SOC variation | |
| iniR07=iniR01; % Module-7 Cell-to-Cell Terminal Resistance variation | |
| iniAH7=iniAH1; % Module-7 Cell-to-Cell capacity variation vector | |
| % Module 8 - same as Module 1 | |
| Ns8=Ns1; % Module-8 Number of series connected strings | |
| Np8=Np1; % Module-8 Number of parallel cells per string | |
| Rext8=Rext1; % Module-8 Accessory total resistance | |
| Q8=Q1; % Module-8 Effective rate of coolant heat transfer from each cell | |
| extQ8=extQ1; % Module-8 Cell-to-Cell External Heat variation | |
| iniT8=iniT1; % Module-8 Cell-to-Cell initial Temperature variation | |
| iniSOC8=iniSOC1; % Module-8 Cell-to-Cell initial SOC variation | |
| iniR08=iniR01; % Module-8 Cell-to-Cell Terminal Resistance variation | |
| iniAH8=iniAH1; % Module-8 Cell-to-Cell capacity variation vector | |
| % ------------------------------------------------------------------------- | |
| % Cell-to-Cell variation in Cell-Terminal-Resistance R0, modeled assuming a | |
| % normal distribution (below) | |
| % % Data already stored in file (*.mat) | |
| % % num312Data = NORMINV(RAND(),1,0.09) - in MS-Excel | |
| % % Data generated saved in file 'num312Data.txt' | |
| % % | |
| sampleDistribution312=load('num312Data.txt'); | |
| totalCellsInFile=max(size(sampleDistribution312)); | |
| totalCells=Ns1*Np1+Ns2*Np2+Ns3*Np3+Ns4*Np4+Ns5*Np5+Ns6*Np6+Ns7*Np7+Ns8*Np8; | |
| cellCount=[Ns1*Np1, Ns2*Np2, Ns3*Np3, Ns4*Np4, Ns5*Np5, Ns6*Np6, Ns7*Np7, Ns8*Np8]; | |
| if totalCells == totalCellsInFile | |
| iniR01=sort(sampleDistribution312(1:Ns1*Np1)'); | |
| iniR02=sort(sampleDistribution312(Ns1*Np1+1:sum(cellCount(1:2)))'); | |
| iniR03=sort(sampleDistribution312(sum(cellCount(1:2))+1:sum(cellCount(1:3)))'); | |
| iniR04=sort(sampleDistribution312(sum(cellCount(1:3))+1:sum(cellCount(1:4)))'); | |
| iniR05=sort(sampleDistribution312(sum(cellCount(1:4))+1:sum(cellCount(1:5)))'); | |
| iniR06=sort(sampleDistribution312(sum(cellCount(1:5))+1:sum(cellCount(1:6)))'); | |
| iniR07=sort(sampleDistribution312(sum(cellCount(1:6))+1:sum(cellCount(1:7)))'); | |
| iniR08=sort(sampleDistribution312(sum(cellCount(1:7))+1:sum(cellCount(1:8)))'); | |
| end | |