Datasets:

introvoyz041
/

tinybasic

i/* 
 *  The Liligo T-Deck configuration
 *    supports the internal FFAT right now, SD not yet done
 */
/* these are the PIN definition from Lilygos utilities.h file */
#define BOARD_POWERON       10
#define BOARD_I2S_WS        5
#define BOARD_I2S_BCK       7
#define BOARD_I2S_DOUT      6
#define BOARD_I2C_SDA       18
#define BOARD_I2C_SCL       8
#define BOARD_BAT_ADC       4
#define BOARD_TOUCH_INT     16
#define BOARD_KEYBOARD_INT  46
#define BOARD_SDCARD_CS     39
#define BOARD_TFT_CS        12
#define RADIO_CS_PIN        9
#define BOARD_TFT_DC        11
#define BOARD_TFT_BACKLIGHT 42
#define BOARD_SPI_MOSI      41
#define BOARD_SPI_MISO      38
#define BOARD_SPI_SCK       40
#define BOARD_TBOX_G02      2
#define BOARD_TBOX_G01      3
#define BOARD_TBOX_G04      1
#define BOARD_TBOX_G03      15
#define BOARD_ES7210_MCLK   48
#define BOARD_ES7210_LRCK   21
#define BOARD_ES7210_SCK    47
#define BOARD_ES7210_DIN    14
#define RADIO_BUSY_PIN      13
#define RADIO_RST_PIN       17
#define RADIO_DIO1_PIN      45
#define BOARD_BOOT_PIN      0
#define BOARD_BL_PIN        42
#define BOARD_GPS_TX_PIN    43
#define BOARD_GPS_RX_PIN    44
#ifndef RADIO_FREQ
#define RADIO_FREQ           868.0
#endif
#ifndef RADIO_BANDWIDTH
#define RADIO_BANDWIDTH      125.0
#endif
#ifndef RADIO_SF
#define RADIO_SF             10
#endif
#ifndef RADIO_CR
#define RADIO_CR             6
#endif
#ifndef RADIO_TX_POWER
#define RADIO_TX_POWER       22
#endif
#define DEFAULT_OPA          100
/* and now the BASIC stuff begins */
/* either use the buildin FAT as a file system */
#undef ESP32FAT
/* or the SD card */
#define ARDUINOSD
#define SDPIN BOARD_SDCARD_CS
/* the display */
#define TFTESPI
#define DISPLAYCANSCROLL
/*the keyboard */
#define ARDUINOI2CKBD
#define SDA_PIN BOARD_I2C_SDA
#define SCL_PIN BOARD_I2C_SCL
#define I2CKBDADDR 0x55
/* can run standalone now */
#define STANDALONE

	i/*
	* The Liligo T-Deck configuration
	* supports the internal FFAT right now, SD not yet done
	*/
	/* these are the PIN definition from Lilygos utilities.h file */
	#define BOARD_POWERON 10
	#define BOARD_I2S_WS 5
	#define BOARD_I2S_BCK 7
	#define BOARD_I2S_DOUT 6
	#define BOARD_I2C_SDA 18
	#define BOARD_I2C_SCL 8
	#define BOARD_BAT_ADC 4
	#define BOARD_TOUCH_INT 16
	#define BOARD_KEYBOARD_INT 46
	#define BOARD_SDCARD_CS 39
	#define BOARD_TFT_CS 12
	#define RADIO_CS_PIN 9
	#define BOARD_TFT_DC 11
	#define BOARD_TFT_BACKLIGHT 42
	#define BOARD_SPI_MOSI 41
	#define BOARD_SPI_MISO 38
	#define BOARD_SPI_SCK 40
	#define BOARD_TBOX_G02 2
	#define BOARD_TBOX_G01 3
	#define BOARD_TBOX_G04 1
	#define BOARD_TBOX_G03 15
	#define BOARD_ES7210_MCLK 48
	#define BOARD_ES7210_LRCK 21
	#define BOARD_ES7210_SCK 47
	#define BOARD_ES7210_DIN 14
	#define RADIO_BUSY_PIN 13
	#define RADIO_RST_PIN 17
	#define RADIO_DIO1_PIN 45
	#define BOARD_BOOT_PIN 0
	#define BOARD_BL_PIN 42
	#define BOARD_GPS_TX_PIN 43
	#define BOARD_GPS_RX_PIN 44
	#ifndef RADIO_FREQ
	#define RADIO_FREQ 868.0
	#endif
	#ifndef RADIO_BANDWIDTH
	#define RADIO_BANDWIDTH 125.0
	#endif
	#ifndef RADIO_SF
	#define RADIO_SF 10
	#endif
	#ifndef RADIO_CR
	#define RADIO_CR 6
	#endif
	#ifndef RADIO_TX_POWER
	#define RADIO_TX_POWER 22
	#endif
	#define DEFAULT_OPA 100
	/* and now the BASIC stuff begins */
	/* either use the buildin FAT as a file system */
	#undef ESP32FAT
	/* or the SD card */
	#define ARDUINOSD
	#define SDPIN BOARD_SDCARD_CS
	/* the display */
	#define TFTESPI
	#define DISPLAYCANSCROLL
	/the keyboard /
	#define ARDUINOI2CKBD
	#define SDA_PIN BOARD_I2C_SDA
	#define SCL_PIN BOARD_I2C_SCL
	#define I2CKBDADDR 0x55
	/* can run standalone now */
	#define STANDALONE