Document Name stringclasses 11
values | URL stringclasses 11
values | page_number int64 1 1.26k | full_text stringlengths 65 18.2k |
|---|---|---|---|
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 209 | Mirroring of x and z axes.
xx0600002817
Mirroring of y and z axes.
Arm configurations
The arm configuration will not be mirrored, which means that after mirroring, it has
to be carefully checked by executing the path in manual mode. If the arm
configuration has to be changed, this must be done manually and the position... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 210 | Original position
A
Mirrored position
A_m
Object frame wobj3
B
Mirror plane
C
To perform this mirroring, the mirror frame must first be defined. To do this, create
a new work object and name it (e.g. mirror ). Then, use the three points, p1 to p3,
to define the object coordinate system by using the robot. This procedu... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 211 | xx0600002819
Robot 1
R1
Robot 2
R2
Virtual mirror plane
G
wobj1 = mirror frame
H
wobj1 for robot 2
J
Projection of p1 in xy-plane
K
Original position
p1
Mirrored position
p1_m
After the work object, wobj1, has been defined, all programming is done in this
frame. Then the program is mirrored using the same wobj1 frame a... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 212 | 9 Cybersecurity for IRC5 robot networks
9.1 Introduction
About this chapter
This chapter discusses security in a network installation with ABB IRC5 systems.
First, it gives an overview about IRC5 and other products typically deployed in a
network installation and the communications between them. A security analysis
ide... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 213 | Mitigating the risks through a comprehensive security policy and architecture
It is generally accepted that the security features of a product or system are only
one part in a successful protection strategy. It is equally important to define,
implement, and maintain an effective security policy, which covers (among oth... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 214 | 9.2 Network architecture and communication
About this section
This section gives an overview about typical components of an IRC5 installation,
which are attached to the network, and the communication between them.
Furthermore, this section serves as basis for the threat analysis ( Security analysis
on page216 ) and the... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 215 | Network with PickMaster
The Plant Control Network architecture details with the PickMaster product is
slightly different and has other security aspects as shown in the following figure.
In a PickMaster installation, the cameras are connected directly to the PC or via a
switch to the PC over a separate network than the ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 216 | Communication protocols between IRC5 related products
The following figure shows the communication protocols between the IRC5 related
products. For detailed information about the application protocols, see IRC5
application protocols on page 227 .
5512/UDP
NFS:
111/UDP, 2049/TCP
(S)FTP:
20,21,22/TCP
34981/UDP
239.255.1... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 217 | 9.3 Security analysis
Why do you need a security analysis?
Network architectures, in which the plant control network is attached to an office
network, which in turn is connected to the Internet, potentially expose the plant
control network to cyber attacks. Therefore, it is important to identify the critical
security t... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 218 | 9.4 IRC5 User Authorization System
About the User Authorization System
The User Authorization System (UAS) limits which individuals (with specific roles)
can perform which operations on the controller by defining the users and groups
that can access the controller and the functionality. Depending on which group a
user ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 219 | How to use the User Authorization System
For information about how to configure and use UAS, see Operating
manual - RobotStudio .
218
Operating manual - IRC5 Integrator's guide
3HAC050940-001 Revision: S
© Copyright 2025 ABB. All rights reserved.
9 Cybersecurity for IRC5 robot networks
9.4 IRC5 User Authorization Syst... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 220 | 9.5 Security policy
9.5.1 Introduction
Overview
Often vulnerabilities are introduced into industrial control systems due to the lack
of a well-defined, accurate, and enforced security policy. Therefore, the security
policy plays an essential role in the reduction of vulnerabilities and the defense
against and mitigatio... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 221 | 9.5.2 General security requirements
About general security requirements
This section only lists a number of things to consider in any computer network. It
is not a complete list.
Physical security
All operations shall be tracked and servers, backup media, and other associated
equipment shall be placed in locked machine... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 222 | •
Only controlled and protected computers are allowed to be connected to the
plant control network.
•
The definitions of authorized users, user groups, and access rights are
continuously maintained to reflect properly the current authorities.
•
Users lock the screen or log off before leaving the workplace.
•
A password... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 223 | Firewall
Firewalls that protect plant control networks shall provide stateful filtering and
preferably offer application level support for the forwarded protocols (e.g., deep
packet inspection). To protect plant control networks from flooding and
denial-of-service attacks, the firewalls shall offer rate-limiting functi... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 224 | Maintenance and audits
Perform maintenance of the ongoing responsibilities and actions to ensure that
the security policy is followed, kept up-to-date, and adapted to organizational
changes.
Periodic testing and reviews of the security policy are required.
Disposal
Before disposal of any storage equipment (anything fro... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 225 | 9.5.3 ABB Robotics IRC5 product specific requirements
Remote access/client
Remote access allows users to access company networks and systems from
computers that are located outside of the protected company. In the context of an
ABB robot control network, these are hosts running RobotStudio. Since the
computers running ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 226 | caused by systems in the plant office network is lower than that caused by remote
systems, tunneling may represents an acceptable alternative. It is still strongly
suggested to deny any unprotected communication between the plant office network
and the plant control network.
Clients in Plant Control network
The PickMas... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 227 | To improve security, RobAPI and Robot Web Services connections to IRC5 robot
controllers from outside the plant control network should be additionally protected
by an encrypted tunnel (VPN) between the client and the firewall (e.g., IPSec). Note
that the use of a protected terminal server (see Remote access/client on ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 228 | 9.6 IRC5 application protocols
Overview
The IRC5 services and application protocols are presented in separate sections
for default and configured/enabled protocols. The tables also define the network
connections that may be used for each service/application. For detailed information
about all network connections, see ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 229 | Usage/Comments
Network
connection
Transport
protocol
Port number
Service, or Application
Enabled by configuration.
WAN
TCP
44818
EtherNet/IP messaging
LAN
UDP
Enabled by configuration.
WAN
TCP
2222
EtherNet/IP I/O
LAN
UDP
Remote disk mounting with FTP.
WAN
TCP
20
FTP client
Enabled by configuration.
LAN
21
Requires opt... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 230 | Usage/Comments
Network
connection
Transport
protocol
Port number
Service, or Application
I/O signals, command, and response.
Required for conveyor tracking mod-
ule (CTM).
WAN
LAN
Service
TCP, UDP
239.255.189.43:18943
34981
RobICI
Enabled by configuration.
Requires option 1550-1 Conv.Tracking
unit Int. or 1551-1 Con... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 231 | For file transfers, RobAPI uses standard FTP.
FTP
RobAPI Network Protocol uses FTP internally for file transfer. The FTP server of
the IRC5 controller supports both active and passive FTP. However, if RobAPI is
acting as FTP client, it uses only passive mode.
FTP is also used independently of RobAPI, for file transfer ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 232 | 9.7 Network connections on the IRC5 main computer
Connections
The I/O network can be connected to one of the the Ethernet ports WAN, LAN 2,
or LAN 3 on the main computer.
The following figure illustrates where the Ethernet port connectors, are placed on
the main computer.
xx1500000391
Description
Label
Connector
Port t... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 233 | Intended use of WAN and LAN ports
The WAN port is a public network interface to the controller, typically connected
to the factory network with a public IP address provided by the network
administrator.
The LAN ports are intended for connecting network based process equipment to
the controller, for example industrial n... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 234 | EtherNet/IP on factory network
When the WAN port is used for connecting to an industrial network, the traffic
shares the same media as the factory network and will share bandwith with other
non industrial network traffic.
The following figure illustrates the network when connecting a scanner and an
adapter to the WAN p... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 235 | Factory Network
Robot I/O
I/O
Switch
Robot I/O
I/O
I/O
I/O
Switch
Sensor
Camera
WAN
LAN 2
LAN 3
Private
Robot Controller 1
LAN 1
Service
Public
WAN
LAN 2
LAN 3
Private
Robot Controller 2
LAN 1
Service
Public
PLC
EtherNet/IP
EtherNet/IP
xx1500000389
EtherNet/IP on dedicated industrial network
By connecting to the isolat... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 236 | Using Anybus adapter to connect two EtherNet/IP networks
EtherNet/IP on shared factory network and private network
To be able to use EtherNet/IP on both the public and the private network, an Anybus
adapter must be used. If the same factory network is used both for EtherNet/IP
communication and other communication, bot... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 237 | WAN
Factory Network
Private
Robot Controller 1
LAN 1
Service
PLC
Robot I/O
LAN 2
LAN 3
I/O
I/O
FBA
EtherNet/IP
WAN
Private
Robot Controller 1
LAN 1
Service
Robot I/O
LAN 2
LAN 3
I/O
I/O
Public
Public
EtherNet/IP
EtherNet/IP
Industrial Network
FBA
xx1500000392
236
Operating manual - IRC5 Integrator's guide
3HAC050940-00... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 238 | Index
3
3rd party software, 14
A
ABB menu, 24
Absolute Accuracy
data storage, 189
account management, 220
add-ins, 47
additional axes
activating, 97
deactivating, 97
advanced restart, 114
anti-virus, 221
application protocols, 227
approach points, 69
ArcLink, 227
B
backup, 222
default file path, 113
directory, 134
impo... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 239 | data types, 63
system parameters, 140
instructions
data types and declarations, 91
expressions, 90
IP address
fixed, 40
obtain automatically, 40
use no address, 39
IRC5 controller, 18
overview, 18
IRC5P, 214
J
joystick, 20
using, 21
jumper plug, 36
L
LAN unit, 110
licenses, 14
M
main computer, 231
main module, 51
Main ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 240 | reset system, 123
revert to last auto saved, 124
start boot application, 121
system, 118
restore
default file path, 113
system, 136
revert to last auto saved, 124
RNP, 227
RobAPI, 225, 229
RobICI, 229–230
robots
activating, 97
deactivating, 97
RobotStudio
overview, 26
RobotWare add-ins, 47
Robot Web Service, 227
Robot ... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 241 |
ABB AB
Robotics & Discrete Automation
S-721 68 VÄSTERÅS, Sweden
Telephone +46 10-732 50 00
ABB AS
Robotics & Discrete Automation
Nordlysvegen 7, N-4340 BRYNE, Norway
Box 265, N-4349 BRYNE, Norway
Telephone: +47 22 87 2000
ABB Engineering (Shanghai) Ltd.
Robotics & Discrete Automation
No. 4528 Kangxin Highway
PuDong... |
ABB_Operating_Manual_IRC5_Integrators_Guide | https://www.uzivatelskadokumentace.cz/Controllers/IRC5/en/3HAC050940-001.pdf | 242 |
ABB AB
Robotics & Discrete Automation
S-721 68 VÄSTERÅS, Sweden
Telephone +46 10-732 50 00
ABB AS
Robotics & Discrete Automation
Nordlysvegen 7, N-4340 BRYNE, Norway
Box 265, N-4349 BRYNE, Norway
Telephone: +47 22 87 2000
ABB Engineering (Shanghai) Ltd.
Robotics & Discrete Automation
No. 4528 Kangxin Highway
PuDong N... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 1 |
ROBOTICS
Product manual, spare parts
IRBP /D2009
![Image]
Trace back information:
Workspace 24B version a13
Checked in 2024-06-18
Skribenta version 5.5.019 |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 2 | ROBOTICS
Product manual, spare parts
IRBP /D2009
![Image]
Trace back information:
Workspace 24B version a13
Checked in 2024-06-18
Skribenta version 5.5.019
Product manual, spare parts
IRBP A -250/500/750
IRBP B -250/500/750
IRBP C -500/1000
IRBP D -300/600
IRBP K -300/600/1000
IRBP L -300/600/1000/2000/5000
IRBP R -3... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 3 | Trace back information:
Workspace 24B version a13
Checked in 2024-06-18
Skribenta version 5.5.019
Product manual, spare parts
IRBP A -250/500/750
IRBP B -250/500/750
IRBP C -500/1000
IRBP D -300/600
IRBP K -300/600/1000
IRBP L -300/600/1000/2000/5000
IRBP R -300/600/1000
Document ID: 3HAC038416-001
Revision: M
© Copyr... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 4 | Product manual, spare parts
IRBP A -250/500/750
IRBP B -250/500/750
IRBP C -500/1000
IRBP D -300/600
IRBP K -300/600/1000
IRBP L -300/600/1000/2000/5000
IRBP R -300/600/1000
Document ID: 3HAC038416-001
Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
Specifications subject to change without notice.
The info... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 5 | The information in this manual is subject to change without notice and should not
be construed as a commitment by ABB. ABB assumes no responsibility for any errors
that may appear in this manual.
Except as may be expressly stated anywhere in this manual, nothing herein shall be
construed as any kind of guarantee or war... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 6 | Table of contents
7
Overview of this manual ...................................................................................................................
9
1
Positioners
9
1.1
IRBP A ............................................................................................................
10
1.2
IRBP B ........... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 7 | This page is intentionally left blank
Overview of this manual
About this manual
This manual contains information on all the spare parts for positioner IRBP A, B,
C, D, K, R, and L presented in Product manual - Product.ProductName /D2009 .
Usage
This manual should be used as a complement to the product manual during:
... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 8 | Overview of this manual
About this manual
This manual contains information on all the spare parts for positioner IRBP A, B,
C, D, K, R, and L presented in Product manual - Product.ProductName /D2009 .
Usage
This manual should be used as a complement to the product manual during:
•
maintenance work
•
repair work.
Who s... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 9 | Description
Revision
This revision includes the following additions and/or changes:
•
Article number changed for grease in MTD 250, see Rotary units and
supports on page 19 .
•
Part number for Graphite white spare parts added.
C
This revision includes the following additions and/or changes:
•
Page 3, model designation... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 10 | 1 Positioners
1.1 IRBP A
Frame parts
2
3
1
1
xx1000000187
Spare part
Part
Pos
MTD 250, see MTD 250 on page 19
Gearbox
1
MTD 500/750, see MTD 500/750 on page 24
MTD 250, see MTD 250 on page 19
Rotary disc
2
MTD 500/750, see MTD 500/750 on page 24
MTD 250, see Motor units for MTD 250 on page 51
Motor unit
3
MTD 500/... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 11 | 1.2 IRBP B
Frame parts
1
1
4
3
1
2
2
5
xx1000000190
Continues on next page
10
Product manual, spare parts - IRBP /D2009
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
1 Positioners
1.2 IRBP B
Spare part
Part
Pos
MTD 200, see MTD 250 on page 19
Gearbox
1
MTD 500/750, see MTD 500/750 on pag... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 12 | Spare part
Part
Pos
MTD 200, see MTD 250 on page 19
Gearbox
1
MTD 500/750, see MTD 500/750 on page 24
MTD 200, see MTD 250 on page 19
Rotary disc
2
MTD 500/750, see MTD 500/750 on page 24
See Motor units on page 51
Motor units
3
See Stop lug on page 49
Stop lug
4
250 MID 1.1, see MID 1.1 on page 41
Rotary unit
5... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 13 | 1.3 IRBP C
Frame parts
1
2
xx1300000002
Spare part
Part
Pos
500, MID 1.1, see MID 1.1 on page 41
Rotary unit
1
1000, MID 2.1, see Motor unit for MID 2.1-2.2 on page 70
See Stop lug on page 49
Stop lug
2
Note
Lifting eyes are not delivered with the IRBP.
12
Product manual, spare parts - IRBP /D2009
3HAC038416-001 Rev... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 14 | 1.4 IRBP D
Frame parts
1
1
2
2
3
4
4
5
6
xx1000000185
Spare part
Part
Pos
MID 1.2, see MID 1.2 on page 43
Rotary unit
1
300, (MTD 250), see MTD 250 on page 19
Rotary unit
2
600, (MTD 500/750), See MTD 500/750 on page 24
MID 2.1-2.2, see MID 2.1 on page 45
Rotary unit
3
See Support collar on page 47
Support collar
... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 15 | 1.5 IRBP K
Frame parts
2
2
1
1
5
4
3
xx1000000184
Spare part
Part
Pos
300, (MTD 250), see MTD 250 on page 19
Rotary unit
1
600, (MTD 500/750), see MTD 500/750 on page 24
1000, (MTD 500/750), see MTD 500/750 on page 24
See Support collar on page 47
Support collar
2
MID 1.2, see MID 1.2 on page 43
Rotary unit
3
300,... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 16 | 1.6 IRBP L
Frame parts
2
1
3
xx1000000188
Spare part
Part
Pos
300, (MTD 250), see MTD 250 on page 19
Rotary unit
1
600, (MTD 500)/750), see MTD 500/750 on page 24
1000, (MTD 500)/750), see MTD 500/750 on page 24
2000, (MTD 20009, see MTD 2000 on page 29
5000, (MTD 5000), see MTD 5000 on page 34
See Support collar... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 17 | 1.7 IRBP R
Frame parts
3
4
1
2
5
xx1000000194
Spare part
Parts
Pos
300, (MTD 250), see MTD 250 on page 19
Rotary unit
1
600, (MTD 500/750), see MTD 500/750 on page 24
1000, (MTD 500/750), see MTD 500/750 on page 24
See Support collar on page 47
Support collar
2
See Stop lug on page 49
Stop lug
3
300, (MTD 250), se... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 18 | Note
Lifting eyes are not delivered with the IRBP.
Product manual, spare parts - IRBP /D2009
17
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
1 Positioners
1.7 IRBP R
Continued
This page is intentionally left blank
2 Rotary units and supports
2.1 MTD 250
Rotary unit MTD 250
6
7
8
10
18
18... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 19 | This page is intentionally left blank
2 Rotary units and supports
2.1 MTD 250
Rotary unit MTD 250
6
7
8
10
18
18
20
21
22
05
1
2
3
4
5
11
12
14
15
16
17
13
23
xx1000000160
Continues on next page
Product manual, spare parts - IRBP /D2009
19
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Ro... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 20 | 2 Rotary units and supports
2.1 MTD 250
Rotary unit MTD 250
6
7
8
10
18
18
20
21
22
05
1
2
3
4
5
11
12
14
15
16
17
13
23
xx1000000160
Continues on next page
Product manual, spare parts - IRBP /D2009
19
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.1 MTD 250
50... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 21 | 50
51
52
53
54
55
55
56
57
58
16
24
05
60
61
62
63
64
xx1000000161
Continues on next page
20
Product manual, spare parts - IRBP /D2009
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.1 MTD 250
Continued
30
40
41
43
42
44
45
xx1000000162
Components valid from the... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 22 | 30
40
41
43
42
44
45
xx1000000162
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Continues on next page
Product manual, spare parts - IRBP /D2009
21
3HAC038416-001 Revision... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 23 | Dimension
Material, type, etc.
Qty
Description
Component
Item
Graphite White
1
Gearbox MTD 250, incl motor
3HAC048683-001
1
ABB Orange
1
Gearbox MTD 250, incl motor
3HAC048683-002
1
Graphite White
1
Cover MTD 250
3HAC052131-001
6
ABB Orange
1
Cover MTD 250
3HAC034827-001
6
Components valid up to these serial numbers:
S... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 24 | Dimension
Material, type, etc.
Qty
Description
Component
Item
ABB Orange
1
Washer MTC
3HAC051738-001
17
Graphite White
Washer MTC
503857001
17
D=28
1
Blind Plug
3HAC029662-006
18
D=19
2
Blind Plug
3HAC029662-003
19
D=16
2
Blind Plug
3HAC029662-002
20
D=14
1
Blind Plug
3HAC029662-001
21
1
Insulated connection plate
3HAC... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 25 | 2.2 MTD 500/750
Rotary unit MTD 500/750
M16 12.9: 300 Nm
4
3
2
1
12
13
9
16
6
17
18
5
14
11 22
xx1000000164
Continues on next page
24
Product manual, spare parts - IRBP /D2009
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.2 MTD 500/750
30
40
44
42
43
45
xx1000... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 26 | 30
40
44
42
43
45
xx1000000165
Continues on next page
Product manual, spare parts - IRBP /D2009
25
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.2 MTD 500/750
Continued
50
52
53
56
57
58
54
55
53
24
05
60
62
63
64
xx1000000166
Components valid from these seria... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 27 | 50
52
53
56
57
58
54
55
53
24
05
60
62
63
64
xx1000000166
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Continues on next page
26
Product manual, spare parts - IRBP /D2009... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 28 | Dimension
Material, type, etc.
Qty
Description
Component
Item
ABB Orange
1
Gearbox MTD 500, incl motor
3HAC035436-003
1
Graphite White
1
Gearbox MTD 500, incl motor
3HAC076879-005
1
ABB Orange
1
Gearbox MTD 500, incl motor
3HAC076879-006
1
ABB Orange
1
Gearbox MTD 750, incl motor
3HAC035398-004
1
Graphite White
1
Gearb... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 29 | Dimension
Material, type, etc.
Qty
Description
Component
Item
1
Insulated connection plate
3HAC036336-001
17
D= 32X40/3
1
Shelter plug
504189010
18
D=28
2
Blind Plug
3HAC029662-006
19
D=16
4
Blind Plug
3HAC029662-002
20
D=14
1
Blind Plug
3HAC029662-001
21
5
Special grease type P 34
0501869002
22
1
Cable bracket MTD 500... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 30 | 2.3 MTD 2000
Rotary unit MTD 2000
22
20
04
2
3
4
5
6
8
23
7
24
xx1000000169
Continues on next page
Product manual, spare parts - IRBP /D2009
29
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.3 MTD 2000
40
42
43
44
45
30
04
xx1000000170
Continues on next page
30... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 31 | 40
42
43
44
45
30
04
xx1000000170
Continues on next page
30
Product manual, spare parts - IRBP /D2009
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.3 MTD 2000
Continued
50
52
53
54
55
56
57
58
70
54
25
52
60
62
63
64
xx1000000171
Components valid from these se... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 32 | 50
52
53
54
55
56
57
58
70
54
25
52
60
62
63
64
xx1000000171
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Dimension
Material, type, etc.
Qty
Description
Component
Item
Gr... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 33 | Dimension
Material, type, etc.
Qty
Description
Component
Item
ABB Orange
1
Cover MTD 2000
3HAC036975-001
13
Components valid up to these serial number:
SEROP: - POF-110000
CNAUS: - POF-510000
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Dimension
Material, type, ... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 34 | Dimension
Material, type, etc.
Qty
Description
Component
Item
1
ROTATING COUPLING
501728007
40
1
Nipple 1/4
503882001
41
1
Hose 1/4
504478001
42
D 13/7
1
HOSE CLAMP
193761002
43
1/4"
1
Hose Nipple
192200103
44
D4.25-4.4"
13/24
1
Washer
3HAC028304-004
45
3/8
2
Hose
504478002
50
2.2 m
1
SVIVELADAPTER MTC 2000
503873001
5... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 35 | 2.4 MTD 5000
Rotary unit MTD 5000
2
3
4
5
6
7
8
22
20
xx1000000172
Continues on next page
34
Product manual, spare parts - IRBP /D2009
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.4 MTD 5000
40
44
42
43
45
30
xx1000000173
Continues on next page
Product manual... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 36 | 40
44
42
43
45
30
xx1000000173
Continues on next page
Product manual, spare parts - IRBP /D2009
35
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.4 MTD 5000
Continued
50
52
53
54
55
56
57
58
70
54
24
06
60
62
63
64
xx1000000174
Components valid from these seria... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 37 | 50
52
53
54
55
56
57
58
70
54
24
06
60
62
63
64
xx1000000174
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Dimension
Material, type, etc.
Qty
Description
Component
Item
Gr... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 38 | Dimension
Material, type, etc.
Qty
Description
Component
Item
ABB Orange
1
Gearbox MTD 5000, incl motor
3HAC035444-006
1
Graphite White
1
Cover MTC 5000
3HAC050667-001
13
ABB Orange
1
Cover MTC 5000
503849880
13
Components valid up to these serial numbers:
SEROP: - POF-110000
CNAUS: - POF-510000
Note
Before ordering th... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 39 | Dimension
Material, type, etc.
Qty
Description
Component
Item
0.15m
1
Welding return cable 95mm 2
504504890
22
Type P 34
16
Special grease
3HAC036806-001
23
1
Cable bracket MTD 5000
3HAC036362-001
30
1
ROTATING COUPLING
501728007
40
1
NIPPEL 1/4
503882001
41
1.1 m
Hose 1/4
504478001
42
D 13/7
1
HOSE CLAMP
193761002
43
... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 40 | 2.5 MTE 500/750
Rotary unit MTE 500/750
![Image]
xx2300001184
Level
Note
Article number
Spare part
L2
3HAC088792-001
Turning disc
A
L2
3HAC089611-001
Turning disc adapter
B
L2
3HAC090531-001
Gearbox
C
L2
3HAC088946-001
Gearbox housing
D
L2
Type C
3HAC043166-005
Motor with pinion
E
Continues on next page
Product manual,... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 41 | Other parts
![Image]
xx2300001339
Level
Note
Article number
Spare part
L2
3HAC088870-001
Cable cover
A
L2
3HEA418554-002
Spring
B
L2
3HAC088861-001
Contact bar
C
L2
3HAC16721-1
Plug
D
L2
3HAC088865-001
Calibration mark
E
L2
3HAC088866-001
Calibration mark
F
L2
3HAC16721-1
Plug
G
40
Product manual, spare parts - IRBP /D... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 42 | 2.6 MID 1.1
Rotary unit MID 1.1
xx1300002584
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Dimension
Material, type, etc.
Qty
Description
Component
Item
Dark grey
1
Gearbo... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 43 | Components valid for all serial numbers
Note
These components are valid for all serial numbers of the positioner.
Dimension
Material, type, etc
Qty
Description
Component
Item
4
Distance
503827001
2
1
Limit Switch plate MIC 1
503940001
3
M6x90
Steel 8.8-A2F
4
Hex socket head cap screw
9ADA183-430
4
6.4x17x3
Steel-mZn12c... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 44 | 2.7 MID 1.2
Rotary unit MID 1.2
6
13
8
1
2
3
xx1000000176
Continues on next page
Product manual, spare parts - IRBP /D2009
43
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.7 MID 1.2
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 45 | Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Dimension
Material, type, etc.
Qty
Description
Component
Item
Graphite White
1
Gearbox MID 1.2, incl motor
3HAC035398-007
1
A... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 46 | 2.8 MID 2.1
Rotary unit MID 2.1
1
2
3
4
5
6
7
10
13
14
26
15
18
23
24
16
M20 12.9: 550 Nm
xx1000000175
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Dimension
Material, ty... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 47 | CNAUS: - POF-510000
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Dimension
Material, type, etc.
Qty
Description
Component
Item
ABB Orange
1
Gearbox MID 2.1, incl motor
3HAC035406-005
1
Components valid for all serial numbers
Note
These components are valid for al... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 48 | 2.9 Support collar
Support collar illustration
![Image]
1
xx1000000295
Support collar 250
Dimension
Material, type, etc
Qty
Description
Component
Item
1
SUPPORT BEARING MTC 250
504212880
1
1
Contact bar 250
3HAC037002-001
2
1
Plug
3HAC035520-001
3
Support collar 500/750
Dimension
Material, type, etc
Qty
Description
Com... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 49 | Dimension
Material, type, etc
Qty
Description
Component
Item
1
Plug
3HAC035520-001
3
48
Product manual, spare parts - IRBP /D2009
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.9 Support collar
Continued
2.10 Stop lug
Stop lug
xx1000000297
Dimension
Material, t... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 50 | 2.10 Stop lug
Stop lug
xx1000000297
Dimension
Material, type, etc.
Qty
Description
Component
Item
MID 1
1
Stop lug
505387-001
1
MID 2
1
Stop lug
505388-001
2
Product manual, spare parts - IRBP /D2009
49
3HAC038416-001 Revision: M
© Copyright 2010-2024 ABB. All rights reserved.
2 Rotary units and supports
2.10 Stop lug
... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 51 | This page is intentionally left blank
3 Motor units
3.1 Motor units for MTD 250
Motor units for MTD 250
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Note
Material, type,... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 52 | 3 Motor units
3.1 Motor units for MTD 250
Motor units for MTD 250
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Note
Material, type, etc.
Qty
Description
Component
Item
Co... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 53 | Note
Qty.
Description
Pos
Steel-A2F, 8.4x16x1.6
4
Plain washer
15
Steel 12.9 Gle 603+Geo500 /M8x25
4
Hex socket head cap screw
16
Spare part kit connection box, complete - Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that t... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 54 | Spare part kit connection box, complete - Valid for all serial numbers of the positioner:
![Image]
2
3
4
5
6
7
8
9
xx1400002555
The spare part kit connection box complete contains:
Note
Qty.
Description
Pos
1
Connection box
2
1
Cover
3
1
Connector bracket MP
4
1
Connector bracket 9p Dsub
5
Nitrile rubber, 150.0x2.0
1
O... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 55 | 3.2 Motor unit for MTD 500-750
Motor units for MTD 500-750
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Note
Material, type, etc.
Qty
Description
Component
Item
Complete
... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 56 | Spare part kit connection box, complete - Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Note
Qty.
Description
Spare part number
Graphite White
1
Spare part kit connection
... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 57 | Spare part kit connection box, complete - Valid for all serial numbers of the positioner:
![Image]
2
3
4
5
6
7
8
6
xx1400002556
The spare part kit connection box complete contains:
Note
Qty.
Description
Pos
1
Connection box FS130
2
1
Cover box FS130
3
1
Connector bracket MP
4
1
Connector bracket 9p Dsub
5
Nitrile Rubbe... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 58 | 3.3 Motor unit for MTE 500-750
Motor units for MTE 500-750
Motor unit, type C
Note
Before ordering these components, make sure that they match the serial number
of the IRBP.
Level
Note
Material, type, etc.
Qty
Article number
Component
Item
L2
Type C
Graphite White
1
3HAC043166-005
Motor with pinion
1
Spare part kit con... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 59 | Note
Qty.
Description
Pos
1
Cover box FS130
3
1
Connector bracket MP
4
1
Connector bracket 9p Dsub
5
Nitrile Rubber D119x3
2
O-ring
6
Steel 8.8-A2F M6x16
7
Torx pan head screw
7
Steel 8.8-A2F M5x12
4
Torx pan head screw
8
50 ml
Surface treatment, Graphite White
-
58
Product manual, spare parts - IRBP /D2009
3HAC038416-... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 60 | 3.4 Motor units for MTD 2000
Motor units for MTD 2000
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Note
Material, type, etc.
Qty
Description
Component
Item
Complete
Graph... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 61 | Note
Qty.
Description
Pos
4
Insulating material
14
4
Washer
15
Steel 12.9 Gle. 603+Geo500 /M8x30
4
Hex socket head cap screw
16
Spare part kit connection box, complete - Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that the... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 62 | Spare part kit connection box complete - Valid for all serial numbers of the positioner:
The spare part kit connection box complete, contains:
![Image]
2
3
4
5
6
7
8
6
xx1400002556
Note
Qty.
Description
Pos
1
Connection box FS130
1
1
Cover box FS130
2
1
Connector bracket MP
3
1
Connector bracket 9p Dsub
4
Nitrile Rubbe... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 63 | 3.5 Motor units for MTD 5000
Motor units for MTD 5000
Components valid from these serial numbers, onwards:
SEROP: POF-110001 -
CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Note
Material, type, etc.
Qty
Description
Component
Item
Complete
Graph... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 64 | CNAUS: POF-510001 -
Note
Before ordering these components, make sure that they match the serial number
of the positioner.
Note
Qty.
Description
Spare part number
Graphite White
1
Spare part kit connection
box, complete
3HAC038209-003
ABB Orange
1
Spare part kit connection
box, complete
3HAC038209-005
Spare part kit con... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 65 | Spare part kit connection box, complete - Valid for all serial numbers of the positioner:
![Image]
2
3
4
5
6
7
8
6
xx1400002556
The spare part kit connection box complete contains:
Note
Qty.
Description
Pos
1
Connection box FS130
2
1
Cover box FS130
3
1
Connector bracket MP
4
1
Connector bracket 9p Dsub
5
Nitrile Rubbe... |
ABB_Product_Manual_IRBP_D2009_Spare_Parts | https://www.uzivatelskadokumentace.cz/Application%20Equipment%20&%20Accessories/Workpiece%20Positioners/en/3HAC038416-001.pdf | 66 | Seal and isolation kit
Note
Qty.
Description
Spare part number
1
Seal and isolation kit
3HAC038215-002
The seal and isolation kit contains:
Note
These components are valid for all serial numbers of the positioner.
Note
Qty.
Description
Pos
4
Insulating tube
13
4
Insulating material
14
4
Washer
15
Steel 12.9 Gle603+Geo5... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.