_id
stringlengths
1
6
title
stringlengths
15
150
text
stringlengths
30
20.1k
instruction_seed
stringlengths
58
1.47k
__original_row_idx
int64
0
38.3k
_source
stringclasses
1 value
43668
How does the dressed Klein-Gordon propagator look in position space?
The free Klein-Gordon propagator in momentum space $\sim (p^2-m^2+i\epsilon)^{-1}$ has just a single pole at $p^2=m^2$. The passage to Fourier space is difficult but possible. The result is very illuminating in terms of how disturbances of a free scalar field propagate. In an interacting theory, with a dressed Klein-Go...
What is the position space representation of the dressed Klein-Gordon propagator given in momentum space as $$G\sim\frac{1}{p^2-m^2-\Sigma(p^2)+i\epsilon}$$, and how does this affect the propagation of disturbances in an interacting scalar field theory?
10,785
cqadupstack-physics
116884
Height of rebound of a projectile from a sphere
![enter image description here](http://i.stack.imgur.com/ss5ZM.png) My work here is: First, I use conservation of energy: (taking the plane as zero potential) $$\frac{1}{2}m(\frac{2ga}{5})+2amg=\frac{1}{2}mv^2+a(1+\cosθ)mg$$ $$\frac{1}{5}ga+2ga=\frac{1}{2}v^2+ga(1+\cosθ)$$ $$v^2=(\frac{12}{5}-2\cosθ)ga \tag1$$ Now reso...
What is the maximum height \( h \) that the object reaches after rebounding, if the angle of incidence \( \theta \) is such that \( \cos \theta = \frac{4}{5} \) and \( \sin \theta = \frac{3}{5} \)? Given that the velocities before and after the bounce are related by the coefficient of restitution \( e = \frac{5}{9} \),...
26,071
cqadupstack-physics
98323
Accelerating cavity in synchotron- how does it actually work?
I wanted to know how a radio frequency accelerating cavity actually works. I know that an electric field is used to accelerate the charged particles. However, is this done by using metal plates with opposite polarities or are there tubes (like in the linac) within the accelerating cavity which have fields in between th...
How do the electric fields in a radio frequency accelerating cavity accelerate charged particles, and what is the role of the cavity's structure, such as metal plates or tubes, in creating these fields?
28,643
cqadupstack-physics
56504
A formal procedure for thermodynamic relations
This is my third time taking a thermodynamics course (two in undergrad, one in grad), and I've finally become frustrated enough about something to post on here. A lot of thermodynamic questions want you to find some quantity, given something else. Typically, the problem will be to relate volume, temperature, or pressur...
Given an equation of state for an ideal gas, \( PV = nRT \), derive an expression for the difference in heat capacities, \( C_p - C_v \), in terms of pressure and temperature using the definitions of enthalpy and internal energy. Evaluate this expression at standard temperature and pressure conditions for one mole of t...
15,960
cqadupstack-physics
72350
Path of Orbital Bodies
I am trying to figure out how to parametrize the path of a body under the influence of gravity from another body, but I am stuck. I have looked at the Wikipedia page on Kepler orbits, but it is rather hard to follow, and doesn't seem to ever actually give the final formula for the position WRT time. (It should somewher...
What is the parametrization of the position vector \(\overset{\rightharpoonup}{r}(t)\) of a body in an elliptical orbit under the influence of gravity, expressed in terms of time \(t\), the semi-latus rectum \(l\), and the eccentricity \(e\)?
22,102
cqadupstack-physics
17481
Hidden observers in Double Slit experiments - Do they matter?
I'm still struggling a bit with some ideas around double slit experiments. One that keeps cropping up for me is the role of observers. Imagine a classic double slit experiment with a hidden observer who has arraigned an apparatus to detect which slit the electron's are passing through. This person and their measurement...
In a double slit experiment, if a hidden observer uses an apparatus that detects which slit electrons pass through, will an interference pattern be observed by an external observer who is unaware of the hidden observer's measurements? If no interference pattern is observed, can this effect be solely attributed to the d...
20,178
cqadupstack-physics
77529
Ergodicity Breaking in Supercooled Liquids
What is a ergodic system? What is Onset temperature of ergodicity breaking in super cooled liquids when we go towards lower temperature?
What is the onset temperature of ergodicity breaking in supercooled liquids, and how does this temperature vary with different substances?
17,879
cqadupstack-physics
31433
Is the Higgs mechanism a fundamental interaction?
Is the Higgs mechanism a fundamental interaction of the same standing as the strong, weak and electromagnetic interactions? If not, is it mediated by the weak interaction? It seems that all the massive particles participate in the weak interaction, and the massless ones do not, but this might just be a coincidence.
What is the role of the Higgs mechanism in the context of particle interactions, and how does it compare in significance to the strong, weak, and electromagnetic interactions? Specifically, which particles acquire mass through the Higgs mechanism, and how does this relate to their participation in the weak interaction?
31,371
cqadupstack-physics
110627
Internal Inspection other than X-ray
I'm looking for the contactless methods to collect the information of the body construction especially skeletal structure to calculate in the computer model . Are there physical methods to inspect internal side of the body other than X-ray and no any exposure of radiation ? For example, echo , MRI and so on .
What are the key non-invasive imaging techniques used to visualize and analyze skeletal structures in the human body, and how do they differ in terms of resolution and usability compared to traditional X-ray imaging?
22,831
cqadupstack-physics
35476
If quantum mechanics is ultimately deterministic, would Shor's factorization algorithm still work for large integers?
Victor Stenger argues that the apparent randomness in quantum mechanics is a result of the randomness in the macroscopic detectors (similar to the randomness in the laws of thermodynamics) and is not something that is inherent to quantum mechanics (this is my interpretation of Stenger). This would imply that QM is ulti...
If quantum mechanics is ultimately deterministic, as suggested by Victor Stenger, what implications would this have for the effectiveness of Shor's factorization algorithm on large integers, and how might it impact the overall development of scalable quantum computing?
34,626
cqadupstack-physics
83714
Sign Paradox in Berry's Phase
Suppose we have normalized states $| n(\vec{R})\rangle$ indexed by continuous variable $\vec{R}$. Then fixing our choice of gauge and ignoring dynamic phase, the phase difference between two states is the Berry's Phase: $$\tag{1} \langle n(\vec{R}_0)| n(\vec{R}_0 +\Delta \vec{r} ) \rangle ~=~ e^{i\gamma}$$ where, if $C...
What is the expression for the Berry's phase \( \gamma \) given a small displacement \( \Delta \vec{r} \) for a normalized state \( | n(\vec{R}) \rangle \), and how does it relate to the inner product \( \langle n(\vec{R}_0)| n(\vec{R}_0 +\Delta \vec{r} ) \rangle \) as \( \Delta \vec{r} \) approaches zero? Additionally...
28,840
cqadupstack-physics
2386
Will an air-filled tire normally gravitate toward being nitrogen-filled just by refilling with air?
A big argument by the nitrogen-in-the-tire crowd is that: > _Nitrogen atoms are bigger and thus less likely to escape the tire, bringing > stability to your tire pressure._ If Earth's atmosphere is %78.084 percent nitrogen, then the non-Nitrogen composition is ~22%. If this 22% is more likely to seep out of the tire, a...
If a tire is filled with regular air (which is approximately 78% nitrogen) 10 times throughout its life and assuming that a portion of the non-nitrogen gases escapes each time, what would be the percentage of nitrogen in the tire after the 10th refill, given that the non-nitrogen gases escape completely with each fill,...
26,074
cqadupstack-physics
25735
Does the dark matter halo rotate with the galaxy?
If the dark matter halo is stationary related to the arms of the galaxy then tidal effects should slow the galaxy rotation. If it rotates with the normal matter in the galaxy then shouldn't it flatten out into a disk?
If the dark matter halo is stationary with respect to the galaxy's arms, calculate the expected reduction in rotational velocity of the galaxy due to tidal effects. Additionally, if dark matter were to co-rotate with normal matter, what would be the implications for the galaxy's shape and density distribution?
10,697
cqadupstack-physics
16852
Is 4-velocity normalized to -1 even for non-geodesic timelike curves?
In Hartle's General Relativity book ("Gravity"), one of the problems (chapter 8 problem 6) is to prove that $g_{\mu\nu}u^\mu u^\nu$ is conserved along geodesics (really not hard to show), where $u^\mu$ is the 4-velocity. My question is: Isn't it true that $g_{\mu\nu}u^\mu u^\nu$ is equal to $-1$ for _any_ timelike curv...
In the context of General Relativity, can you explain why the expression \( g_{\mu\nu} u^\mu u^\nu \) is equal to \(-1\) for any timelike curve, not just geodesics? Specifically, derive the relationship and discuss the significance of the geodesic equation in this proof.
22,168
cqadupstack-physics
14013
Stress and strain
Let us consider a rod having a young's modulus $Y$. Let it be of length $l$, and suppose it is suspended from a point P. Let us pull the rod with a force $F$ at a point Q which is at a distance $2/3l$ from the point P. Next let us apply the same force at the other end point of the rod. Is the length of the rod in both ...
If a rod with a Young's modulus \( Y \) and length \( l \) is suspended from a point \( P \), and a force \( F \) is applied at a distance of \( \frac{2}{3}l \) from point \( P \), how does the elongation of the rod compare to the elongation when the same force \( F \) is applied at the other end of the rod? Calculate ...
22,307
cqadupstack-physics
30031
Enhance a home build spectrometer
I would like to build a home made spectrometer like it's describing here: http://coolcosmos.ipac.caltech.edu/cosmic_games/spectra/makeGrating.htm How can I improve this spectrometer? A prism from an old binocular? How would I enhance this spectrometer to improve accuracy and clarity?
What design modifications can I make to a homemade spectrometer using a diffraction grating and an old binocular prism to enhance its accuracy and clarity, and what quantitative measurements can I take to evaluate these improvements?
34,175
cqadupstack-physics
963
Why do we define such a thing as singularity?
According to general relativity, an observer not in the close proximity of a black hole, observing a mass fall into that black hole, will never see that mass cross event horizon(it will gradually fade but never actually pass through the event horizon) as it requires an infinite amount of time to do so. So, effectively,...
In the context of general relativity, if an observer at a safe distance from a black hole can never witness an object crossing the event horizon, how does the mass of the falling object affect the gravitational field outside the black hole as it approaches the event horizon, and what implications does this have for the...
11,420
cqadupstack-physics
91103
How to show that a general Galilean transformation in three dimensions is a conformal transformation?
Suppose two particles with equal mass move and then collide. We can easily show that the angle of collision is ninety degree if we choose our frame of reference moving with velocity equal to one of the particles velocity. How can we prove that any inertial frame of reference preserve the angle of collision? In other wo...
Given two particles with equal mass that collide at an angle of ninety degrees in a frame of reference moving at the velocity of one of the particles, how do we mathematically prove that the angle of collision remains ninety degrees in any inertial frame of reference? Specifically, what equations or transformations sho...
6,165
cqadupstack-physics
40900
How far does typical view of clouds/atmosphere extend?
The specific "sub questions" I'm asking are: 1. When you are looking at clouds just on the horizon, how far away would they be? 2. How wide (in km) is that total field of vision at roughly cloud height. * Let's assume that the clouds being viewed are of the high family form which range from 5-12.2km (16,500 to ...
Given a person who is 1.7 meters tall standing on flat ground at sea level, how far away can they see clouds that are between 5 km and 12.2 km in altitude, and what is the approximate width of their field of vision at that cloud height?
19,181
cqadupstack-physics
119739
What is an intuitive explantion for the fact that the Maxwell-Boltzmann distribution of energies is independent of mass?
If you take the Maxwell-Boltzmann distribution of velocities (which depends on the mass) and substitute $v=\sqrt{\frac{2E}{m}}$ you get the distribution for the energies, which turns out to be independent of mass. What physical reality does this reflect? Why is the velocity distribution mass dependent, whereas the ener...
What is the relationship between the mass of a particle and its velocity as described by the Maxwell-Boltzmann distribution, and how does this relationship lead to an energy distribution that is independent of mass? Additionally, can you derive the expression for the energy distribution from the velocity distribution?
25,546
cqadupstack-physics
82929
Do primordial background neutrinos orbit in dark matter halos?
According to Wikipedia, neutrinos separated from other matter seconds after the Big Bang and formed a separate background radiation field which now fills space at a temperature ~2 K. Supposing neutrinos have a rest mass of 2 eV/c2, they should be traveling at an average speed $$v_\nu = c \sqrt{2 \cdot k \cdot \frac{2\m...
If neutrinos have a rest mass of 2 eV/c² and fill space at an average speed of approximately \(4 \times 10^6 \, \text{m/s}\), how would their current rest mass energy compare to their energy when they were in thermal equilibrium with the other particles in the early universe, given that their original energy was 2.5 Me...
23,955
cqadupstack-physics
134210
What knowns conflict with this spacetime curvature concept?
A 1-d line can be curved and made infinite by being on a 2d plane, and having the 2d plane wrap. We can do this for a 2d sheet in 3d as well. The hypothesis is that somehow 3d (4d spacetime) may be wrapped and infinite. The consequences of this would be that if you kept traveling through space (accounting for curvature...
If the universe is modeled as a curved 3D space where points eventually meet at "opposite" sides due to this curvature, calculate the amount of expansion that would need to occur from the Big Bang to reach a maximum expansion point before stars begin to converge toward the opposite side. What would be the implications ...
14,774
cqadupstack-physics
98025
Have the values of constants ever changed before?
Example sub-questions: * Was the speed of light always that value? * Was the acceleration due to gravity always been 9.8m/s/s? * Etc By "change" I mean both actual change in the physical world because of multiple factors and "change" in the numerical value (because the initial value discovered was not precise or ...
What is the historical variation of the speed of light as measured by different scientists over time, and how has the precision of its value changed with advancements in technology?
2,698
cqadupstack-physics
1544
Nonlinear optics as gauge theory
the widely used approach to nonlinear optics is a **Taylor expansion** of the dielectric displacement field $\mathbf{D} = \epsilon_0\cdot\mathbf{E} + \mathbf{P}$ in a Fourier representation of the polarization $\mathbf{P}$ in terms of the dielectric susceptibility $\mathcal{X}$: $\mathbf{P} = \epsilon_0\cdot(\mathcal{X...
Given the Lagrangian density for the Born-Infeld model, \(\mathcal{L} = b^2\cdot \left[ \sqrt{-\det (g_{\mu \nu})} - \sqrt{-\det(g_{\mu \nu} + F_{\mu \nu}/b)} \right]\), derive the expression for the maximum energy density of the system. Assuming a specific value for \(b\) and a constant electromagnetic field strength ...
25,105
cqadupstack-physics
88933
The eigenspinors for the spin operator in the $x$-direction?
$$S_x= \frac{\hbar}{2}\quad\begin{pmatrix}0&1\\\1&0\end{pmatrix}\quad$$ $$S_x{X_+}^{(x)}=\frac{\hbar}{2}{X_+}^{(x)}$$ How can I find the eigenvalue of $S_x$? My book says $$ \left| \begin{array}{cc} -\lambda & \frac{\hbar}{2} \\\ \frac{\hbar}{2} & -\lambda\\\\\end{array} \right|=0 $$ So $\lambda=\frac{\hbar}{2} or \fra...
Can you explain the significance of setting the determinant to zero in the process of finding the eigenvalues of the matrix representation of \( S_x \)? Additionally, what does the \( -\lambda \) term in the diagonal of the characteristic polynomial represent?
29,522
cqadupstack-physics
23250
Is energy applied by the muscle when it holds a body in the air?
> **Possible Duplicate:** > Why does holding something up cost energy while no work is being done? We all know the following Newtonian formulas: PotentialGravitationEnergy=m*g*h Kinetic Energy = 0.5m * v^2 W = F * distance Therefore, if I put an apple on a table, it will not gain nor lose [potential] ener...
When holding an object, like an apple, in the air, how much energy does a person expend in terms of calories if they hold it for 10 minutes, assuming the weight of the apple is 0.1 kg and the muscle efficiency is around 20%?
23,705
cqadupstack-physics
96426
Would not gravity negate entropy?
Back in high school, I asked my teacher gave us a quick explanation of relativity. Specifically, he told us what $E=mc^2$ meant. He explained that, at least as far as we needed to be concerned, matter is simply condensed energy. This, to me, was amazing. Obviously, it's not exactly that simple. Condensation isn't somet...
After the heat death of the universe, when entropy is maximized and the universe reaches thermal equilibrium, why wouldn't gravity cause matter and energy to coalesce into new structures despite the reality of high entropy?
19,163
cqadupstack-physics
48192
Banach Space representations of physical systems
I think most physicists mostly model physical systems as some kind of Hilbert space. Hilbert spaces are a strict subset of Banach spaces. **Questions:** * Can physical systems really have non-compact topologies, as a Banach space has? * Does anyone have an example of physics which requires a physical space which is...
Can you provide an example of a physical system that is best represented by a Banach space rather than a Hilbert space, and explain why this representation is necessary?
960
cqadupstack-physics
63674
Is there a closed form solution to the Esdale river problem?
This is probably not well known problem but it looks like open problem. What kind of methods there are to find a closed form solution to the physical situation? * * * Can you solve this problem? You're passively flowing downstream in the middle of a river that has its fastest flow in the middle. Most places along the r...
If you are drifting in a river with a flow speed \( V \) in the middle and your swimming speed is a constant \( v \), and you want to reach a point on the bank that is \( y \) meters away from your current position, at what angle \( \theta \) relative to the shore should you swim as a function of your distance from the...
26,696
cqadupstack-physics
27968
How is it possible that we see light from shortly after the big bang?
How can astronomers see light from shortly after the big bang? How did we get "here" before the light that emanated from our "creation"?
What is the redshift factor of light from the cosmic microwave background radiation that allows astronomers to observe light from shortly after the Big Bang, and how does this relate to the expansion of the universe?
23,020
cqadupstack-physics
81105
Why can't batteries be charged quickly?
Charging of laptops, cell phones take so much time. Why can't we make such batteries easily/commercially which are charged more quickly? What's the thing behind this limiting?
What are the underlying electrochemical principles that limit the charging speed of lithium-ion batteries in devices like laptops and cell phones, and what potential advancements could allow for faster charging solutions?
2,270
cqadupstack-physics
70189
History of the elementary particles
The current model for the elementary particles is the standard model. I understand its basics It is for me however, difficult to wrap my mind around it without having some kind of knowledge of the predecessors of this model. Just like first KLMN shells are taught first instead of SPDL, I feel the need of following this...
What are the key historical models of elementary particles leading up to the Standard Model, and how do they differ in framework and predictions?
6,904
cqadupstack-physics
45785
Why isn't temperature measured in units of energy?
Temperature is the average of the kinetic energies of all molecules of a body. Then, why do we consider it a different fundamental physical quantity altogether [K], and not an alternate form of energy, with a dimensional formula derived from three initial fundamental quantities, length [L], mass [M] and time [T]?
Given the relationship between temperature and the average kinetic energy of molecules, derive the dimensional formula for temperature using the fundamental quantities of length [L], mass [M], and time [T]. Then explain why temperature is treated as a separate fundamental quantity rather than a form of energy.
16,136
cqadupstack-physics
81906
Should particles in Smoothed Particle Hydrodynamics (SPH) always move during a simulation?
Or can they just be used as an interpolation points and use some other "transported property" which are just evolved and propagated from boundary conditions like for eg. heat conduction through a solid metal bar. It seems to be possible, but isn't clearly elaborated. The force computation step is always used for fluid ...
What are the relevant equations and principles that govern heat transfer by conduction in a solid, especially in relation to discretization methods, aside from the heat diffusion equation?
19,375
cqadupstack-physics
7487
Iodine-131 half-life and reality
Iodine is a chemical element with symbol I and atomic number 53. There is currently a lot of discussions regarding radioactivity in Japan, and iodine-131. Iodine-131 has a half-life of 9 days. Does it mean that people drinking radioactive water (with iodine-131) will lose half of it within 9 days? And thus the health...
If a person drinks water contaminated with iodine-131, which has a half-life of 9 days, how much of the original amount of iodine-131 will remain in their body after 27 days?
34,114
cqadupstack-physics
62896
Elementary question on pion-proton scattering cross-section
![enter image description here](http://i.stack.imgur.com/5zrh3.jpg) Is $E_k$ the energy of the outgoing or incoming pion? The first peak is supposed to be a delta baryon. What does the graph tell us, experimentally? A pion of kinetic energy x comes in, then we look at the graph and find the cross-section, so then we ha...
In an experiment measuring pion collisions, a graph is plotted showing the cross-section as a function of the kinetic energy of the incoming pions. If the first peak in the graph corresponds to the resonance of a delta baryon, what does the area under this peak represent in terms of probabilities, and how can it be rel...
4,777
cqadupstack-physics
130618
simplification of Green's intergral for diffusion
\begin{eqnarray} I_1 = \int^{\infty}_{0} \frac{1}{\tau}d\tau \int^{+\infty}_{-\infty} \exp\left[-\frac{p}{2\tau}(x-x')^2 + (z-z' + \tau)^2\right]dx' \end{eqnarray} where, $p$, $x$ $z$ and $\tau$ are dimensionless. Integral arises in determining shape of steady state surface in solidification process. Lecture notes says...
How can we demonstrate that the integral \( I_1 = \int^{\infty}_{0} \frac{1}{\tau}d\tau \int^{+\infty}_{-\infty} \exp\left[-\frac{p}{2\tau}(x-x')^2 + (z-z' + \tau)^2\right]dx' \) becomes a function of the parameter \( p \) only, when substituting \( z = -\frac{x^2}{2} \) and applying the transformations \( x' = x + y \...
22,823
cqadupstack-physics
132397
The Effect of Tortoise Coordinates
Referring particularly to http://arxiv.org/abs/hep-th/9909056 in regard to the wave equation for Schwarzschild-AdS black holes (p.4), I'm trying to understand tortoise coordinates. So starting with the 4-dimensionalSchwarzschild-AdS metric in the general form $$ds^2=-f(r )dt^2+\frac{dr^2}{f(r )}+r^2(d\theta^2+sin^2 \th...
What is the expression for the potential \( V(r) \) in original coordinates for the wave equation describing perturbations around a Schwarzschild-AdS black hole, and how does it relate to the Schrödinger-like form obtained using tortoise coordinates?
30,272
cqadupstack-physics
69265
Aggregating daily readings with units of parts per million
I have a series of daily readings (NOx emissions) measured in parts per million. I need to aggregate the daily readings into a monthly measure. Clearly a sum operation will be incorrect (parts per million is a ratio). Am I correct that aggregating samples in parts per million can be achieved with a simple mean operatio...
What is the correct method to calculate the average NOx emissions in parts per million (ppm) for a month, if I have daily readings of 100 ppm and 500 ppm over two days?
35,359
cqadupstack-physics
63303
Where does one find pair-correlation functions for various materials?
What is the canonical source for finding pair-correlation functions for atoms in various materials? I am interested in both numeric computations and experimental measurements (like might be obtained from neutron scattering). Is a free source available?
What is the pair-correlation function for atoms in crystalline silicon, and how can it be experimentally measured using neutron scattering techniques?
23,872
cqadupstack-physics
81375
Non-uniqueness of solutions in Newtonian mechanics
In _The Variational Principles of Mechanics_ by Lanczos, in section 1 of Chapter 1, Lanczos states that for a complicated situation, the Newtonian approach fails to give a unique answer to the problem, in contrast to the analytical mechanics approach. Can anyone provide an example where the Newtonian approach cannot gi...
Can you provide an example of a mechanics problem in which the Newtonian approach leads to multiple possible solutions, specifically in a context that illustrates its limitations compared to analytical mechanics?
27,679
cqadupstack-physics
3636
Why is stringless supergravity not considered by many to be a candidate theory of quantum gravity?
This paper seems to show that $d=4, N=8$ supergravity is finite. Yet the paper only has three citations in spires, and I certainly haven't heard talk of a new candidate theory of gravity. Why isn't perturbative supergravity with some supersymmetry breaking principle, coupled with the standard model considered a possibl...
What are the implications of $d=4, N=8$ supergravity being finite for our understanding of gravity, and how does it compare to the standard model in terms of coupling to matter?
35,806
cqadupstack-physics
2228
What is the definition of colour (the quantum state)?
I heard somewhere that quarks have a property called 'colour' - what does this mean?
What are the different types of 'color charge' that quarks can possess, and how do these properties affect their interactions in particle physics?
27,808
cqadupstack-physics
65811
Can convection cells evolve in stably stratified fluid?
Assume stably stratified fluid but not in equilibrium, e.g. with non-constant temperature gradient for example. Can convection cells be present? Typical example of convection cells is Rayleigh–Bénard convection. But this is example of unstably stratified fluid. In stably stratified fluid which is not in equilibrium is ...
In a stably stratified fluid with a non-constant temperature gradient, can you quantify the minimum heat flux required to induce convection cells, and what factors influence the onset of instability in this scenario?
36,483
cqadupstack-physics
43308
How to publish scientific papers on the internet for free?
I have written some scientific papers and I want to publish them for free so peoples can take benefit from it and I also want to make it safe so no one can steal it. PS: I am very young and I don't have the necessary amount of money.
What are the most effective open-access platforms for young authors to publish scientific papers without any fees, while ensuring their work is protected from intellectual property theft?
27,864
cqadupstack-physics
33639
On Bell's Inequality (Classical Intuition) and Quantum Mechanical Counter Intuition
This posting is directly related to the issue in The System and the Measuring Gadget. The QM expectation is given by: $$\langle\sigma_{1}.\vec{a}{\;}\sigma_{2}.\vec b\rangle=-\vec a.\vec b$$ In the above relation we are considering _the measured value_ of spin which is the outcome between the value of some property of ...
What implications does Bell's Inequality have for the relationship between hidden variables and quantum measurements, specifically in relation to the formulated expectation value \( \langle \sigma_{1} \cdot \vec{a} \, \sigma_{2} \cdot \vec{b} \rangle = -\vec{a} \cdot \vec{b} \) and the use of the probability distributi...
34,821
cqadupstack-physics
112239
How to calculate the energy freed in the reaction: $^{10}_5Be +\space ^2_1H \rightarrow \space^{11}_5B + \space ^1_1H$?
I have the following reaction: $^{10}_5\mathrm{Be} +\space ^2_1\mathrm{H} \rightarrow \space^{11}_5\mathrm{B} + \space ^1_1\mathrm{H}$ And I know that I have to use the formula: $E = \Delta m\cdot c^2 = \Delta m \cdot \frac{931,5MeV}{u}$. So I just need $\Delta m$ which is equal to: $\Delta m = m_b - m_a$ where $m_b$ r...
Given the nuclear reaction \(^{10}_5\mathrm{Be} + ^2_1\mathrm{H} \rightarrow ^{11}_5\mathrm{B} + ^1_1\mathrm{H}\), and using the information provided about the masses \(m(^1_1\mathrm{H}) = 1.00783 \, u\) and \(m(^2_1\mathrm{H}) = 2.01410 \, u\), can you calculate the mass difference \(\Delta m\) and the energy released...
21,760
cqadupstack-physics
32830
Is it theoretically possible to reach 0 kelvin?
I'm having a discussion with someone. I said that it is -even theoretically- impossible to reach 0K, because that would imply that all molecules in the substance would stand perfectly still. He said that this isn't true, because my theory violates energy-time uncertainty principle. He also told me to look up the Schrod...
Is it theoretically possible to reach absolute zero (0 K) in a physical system, and how does the energy-time uncertainty principle relate to the ground state energy of a quantum harmonic oscillator as described by the Schrödinger equation? What is the lowest possible energy state of a quantum harmonic oscillator?
2,913
cqadupstack-physics
94183
Why does tossing a coin in a train and on a train differ?
Suppose that I am inside of a moving train. I have a coin in my hand and I am standing still. If I toss this coin straight up, it will fall back into my hand. Now, suppose that I am on that moving train's roof. Now if I toss the coin straight up, the coin will not land in my hand, rather it will fall toward the place w...
When I toss a coin straight up while standing on a moving train, what will be its horizontal displacement relative to the train when it falls back down, assuming the train is moving at a constant velocity? Calculate this displacement if the train is traveling at 30 m/s and the coin is in the air for 0.5 seconds.
951
cqadupstack-physics
66779
Is everything in the physical world composite?
In philosophy there is a principle that anything composite cannot have existed eternally, since it is preceded by its parts and whatever forces assembled it. Is everything in the physical world composite in one sense or another or is there something not composite?
Is there any fundamental particle in physics that is not composite, and if so, what is it?
554
cqadupstack-physics
111324
Is there any significance of atomic orbitals?
We have been taught that the atomic orbitals we read about are probability density region of finding electrons of particular energies which are designated by the various quantum numbers. Since, there is high degree of uncertainty when we talk about the position of merely the detection of an electron as well as the ener...
What experimental evidence supports the existence of atomic orbitals as defined by quantum mechanics, and how can we confirm that electrons occupy specific orbitals, such as the 2p_x orbital?
26,894
cqadupstack-physics
135222
Why can't electrons fall into the nucleus?
I read a book on pop sci book on quantum mechanics and the author said that electrons do not fall into the nucleus due to quantum mechanics- which principles suggest this (I think it was Heisenberg's Uncertainty and Pauli's Exclusion Principle) and why? Also, I've heard that if Bohr's planetary model were correct, then...
Explain how Heisenberg's Uncertainty Principle and the Pauli Exclusion Principle prevent electrons from spiraling into the nucleus of an atom, and discuss how the implications of Bohr's planetary model would lead to electron energy loss.
11,184
cqadupstack-physics
133718
Gravity in spacetime
Can the effect of gravity in spacetime be thought of as if nearby particles have a tendency to "align" their four velocity direction? I.e. "to point in the same direction".
In a region of spacetime where gravity is significant, how does the alignment of the four-velocity vectors of nearby particles affect their relative motion, and what mathematical framework can be used to describe this phenomenon?
3,038
cqadupstack-physics
54451
How does earth carry moon with it, if it can not force moon to touch it by gravitational force?
earth's gravitational force is acting on its moon in such a way that it forces moon to rotate round its orbit by centripetal force and carries it while rotating round the sun by gravitational force. I don't understand why in this condition moon doesn't come to the earth while earth is carrying it through gravitational ...
What is the balance of gravitational forces and centripetal acceleration that keeps the Moon in orbit around the Earth while both the Earth and Moon travel around the Sun, and how does this interaction prevent the Moon from spiraling into the Earth?
4,731
cqadupstack-physics
34564
How does the inner core relieve stress as the Earth's rotation slows?
One of the surprises for me in working out the answer to this question: Why is the Earth so fat? , is that the core is more elliptical than the surface, the extra ellipticity builds up gradually to about 10% (this is false, I miscalculated the ellipticity, it is actually less elliptical by a factor of 1.47, so 47 perce...
How does the ellipticity of the Earth's core compare to its surface, and what is the impact of the Earth's rotation slowing on the core's shape and stability? Quantitatively, by how much does the core's ellipticity differ due to changes in rotational speed, and what is the time scale for any potential adjustments?
17,925
cqadupstack-physics
24448
Hydrogen radial wave function infinity at r=0
When trying to solve the Schrödinger equation for hydrogen, one usually splits up the wave function into two parts: $\psi(r,\phi,\theta)= R(r)Y_{l,m}(\phi,\theta)$ I understand that the radial part usually has a singularity for the 1s state at $r=0$ and this is why you remove it by writing: $R(r) = \frac{U(r)}{r}$ But ...
What is the physical interpretation of the wave function behavior at the origin, specifically why does the radial part \( R(r) \) approach infinity as \( r \) approaches zero for the 1s state in a hydrogen atom, and how does this relate to the spatial distribution of the electron cloud?
25,297
cqadupstack-physics
34357
Tips on teaching Dimensional Analysis?
What's a good way to explain dimensional analysis to a student? Here's a simple question which this method would be useful: Let's say a truck is moving with a speed of 18 m/s to a new speed of 13 m/s over a distance of 48 meters. How long did it take for the truck to break to its new speed, and what was the acceleratio...
A truck is moving with an initial speed of 18 m/s and decelerates to a final speed of 13 m/s over a distance of 48 meters. How long does it take for the truck to decelerate to its new speed, and what is the acceleration of the truck? Show your calculations using dimensional analysis.
11,633
cqadupstack-physics
91907
A draft makes people feel cold. How can that be measured?
On some days our office feels very cold to the point at which we find it difficult to type because our hands have gone numb. But our facilities manager insists it is the same temperature as always. We have discovered the reason for feeling cold is that the air conditioning causes a draft of cold air. Whoever is in the ...
How can we quantitatively measure the difference in temperature experienced by a person in a cold air draft compared to a person not in the draft, and what specific tools or methods would be best for accurately demonstrating this thermal sensation discrepancy?
19,140
cqadupstack-physics
91301
Advice on beginning self learning physics from scratch
I am pursuing masters degree in computer applications. I have no formal Mathematics and Physics background but for masters degree entrance examination I have studied senior high school level Mathematics with some introductory college level Mathematics like multi-variable calculus, advance linear algebra etc but that wa...
What are the total number of chapters in "Introduction to Linear Algebra" by Gilbert Strang, "Trigonometry" by Charles P. McKeague and Mark D. Turner, and "Fundamentals of Physics Extended" by David Halliday, Robert Resnick, and Jearl Walker combined?
22,769
cqadupstack-physics
47641
Using wavepackets instead of photons in quantum computer
Why does a photonic quantum computer require photons? Why wouldn't wave packets work just as well, better in fact since it would get away from the use of fragile single photons? (Article)
What are the advantages of using single photons in a photonic quantum computer compared to using wave packets, in terms of their ability to create and manipulate quantum states?
27,510
cqadupstack-physics
99137
Can a full image be made in mirror if we change the distance between object and mirror?
To see the full height of man, the height of mirror should be half of the height of the man. What happens when we decrease the distance between mirror and man?
If a man is 180 cm tall, what should be the minimum height of a mirror for him to see his full reflection, and how will the angle of reflection change if the distance between the mirror and the man is reduced to half of its initial value?
17,085
cqadupstack-physics
3104
Where can I find a good classification for phase transitions?
I'm having a hard time to find a good (and modern) classification scheme for phase transitions and related universality classes. Can someone recommend a paper/book/site? Detailed mathematical aspects are very much welcome.
What are the distinct universality classes associated with first-order and second-order phase transitions, and how do these classifications differ in terms of critical phenomena? Provide examples of each class along with relevant mathematical descriptions.
22,849
cqadupstack-physics
51576
Does electric potential have a temperature?
When I took my first thermo class a tucked away chapter introduced Exergy in terms of electrical energy, meaning that the amount of electrical energy you could get from something is functionally its exergy. Wikipedia doesn't go so far, but this has bothered me for years. > Forms of energy such as macroscopic kinetic en...
What is the theoretical maximum amount of work that can be extracted from a system with a potential of 1 Volt, and how does this relate to the concept of exergy in electrical energy?
7,073
cqadupstack-physics
71048
Can anyons emerge from momentum-space other than spatial dimensions?
So far in condensed matter physics, I only know anyons(abelian or nonabelian) can emerge as quasiparticles in 2D _real-space_. But is there any possibility to construct anyons in _momentum-space_ ? And what about the braiding, fusion rules in _momentum-space_ ? I mean do anyons always live in _real-space_ rather than i...
Can anyons, which are quasiparticles that can be either abelian or nonabelian, be constructed in momentum-space, and if so, how do their braiding and fusion rules compare to those in real-space?
25,377
cqadupstack-physics
28146
matter wave and wave function
Is there any mathematical relationship between matter wave (or de Broglie wave) and wave function? Also, does each type of particle (e.g. photon, electron, positron etc.) have its own unique wave function?
What is the mathematical relationship between the de Broglie wavelength of a particle and its wave function, and do different types of particles (such as photons, electrons, and positrons) possess distinct wave functions characterized by specific properties?
6,609
cqadupstack-physics
83154
What's the timescale until the Medium Crunch?
The future of the universe seems to be: * clusters of galaxies drift apart due to space expansion until they all pass out of each other's cosmic event horizon. Gravitationally bound clusters overcome the space expansion, but they keep moving away - and once beyond Event Horizon of our cluster they cease to exist for ...
What is the estimated timescale for our local galaxy cluster to undergo a "Medium Crunch," where all its mass concentrates into a single point, given current models of gravitational attraction and space expansion rates?
430
cqadupstack-physics
98352
Qubit in Type 1.5 superconductor?
I'm interested in Type 1.5 superconductors, first proposed by Egor Babaev in 2002 and found in the laboratory in 2009 (magnesium dibromide). Such conductors favor small bundles of vortices. The most stable number of vortices in the bundle varies depending on conditions but is typically from 2 to 12. The vortices have f...
If a bundle of three vortices in a Type 1.5 superconductor could each be characterized as anyons, how many possible quantum states could this bundle represent as a qubit?
9,374
cqadupstack-physics
92633
Example of Torque, Center of Precession
So here's the set up, we have a fence of length $2L$, and a support strut a distance $l$ from the axis (think of a railroad crossing gate). We need to find the best position for the support rod, so that the pivot takes minimum wear. We analyze the forces on the gate, and find that there are three vertical forces (we ar...
Given a railroad crossing gate modeled as a uniform beam of length \( 2L \) and weight \( W = Mg \), with a support strut located at a distance \( l \) from the pivot point, derive an expression for the minimum wear on the pivot in terms of the distances \( L \) and \( l \), as well as the weight of the gate. Specifica...
1,329
cqadupstack-physics
82746
Why Don't the Ladder Operators Commute?
I have two problems with ladder operators. The first is that I feel they should somehow result in measurable things. The asymmetry of applying the plus operator versus the minus operator is very strange to me. Second, I don't understand why applying the raising operator and then the lowering operator is different from ...
In a quantum harmonic oscillator, if you apply the raising operator followed by the lowering operator, the final state is not the same as if you apply the lowering operator followed by the raising operator. Can you explain the difference in the resulting states and why this asymmetry occurs in terms of energy levels? A...
31,151
cqadupstack-physics
46157
Why cant one see tidal effects in a glass of water?
Why cant one see the tidal effect in a glass of water like in an ocean?
What factors contribute to the visibility of tidal effects in large bodies of water, like oceans, compared to smaller volumes of water, such as in a glass? Please provide a quantitative explanation of how these factors differ in magnitude.
10,103
cqadupstack-physics
95585
Work done by an expanding gas
Today in an engineering thermodynamics lecture, the professor gave an example of a gas doing work. We had a cylinder full of helium at a pressure of something like 200 kPa absolute and the valve was opened so that the gas would flow out against the atmospheric pressure until the pressures were equal. Also the cylinder ...
In the scenario described, a cylinder of helium is pressurized at 200 kPa and releases gas until it reaches atmospheric pressure. Given that the helium's pressure decreases as it expands, what is the correct expression for the work done by the gas during this expansion? Additionally, can you explain whether this proces...
12,560
cqadupstack-physics
22611
advantage of string theory over other theory-of-everything candidates
I am getting curious over why string theory, especially M-theory, is the most popular candidate for the theory of everything. It seems that all candidates of the theory of everything lack substantial experimental supports, so why is string theory so special? Thanks.
What is the value of the energy scale at which string theory predictions begin to deviate from those of the Standard Model, and how does this energy scale compare with current experimental limits?
21,742
cqadupstack-physics
73605
Why does nonlinearity in quantum mechanics lead to superluminal signaling?
I recently came across two nice papers on the foundations of quantum mechancis, Aaronson 2004 and Hardy 2001. Aaronson makes the statement, which was new to me, that nonlinearity in QM leads to superluminal signaling (as well as the solvability of hard problems in computer science by a nonlinear quantum computer). Can ...
What would be the implications for causality in quantum mechanics if nonlinearity were introduced, and how could one quantitatively assess the degree of superluminal signaling that might arise from even a small amount of nonlinearity?
28,378
cqadupstack-physics
41501
Before the Big Bang
I've heard this saying before I don't know about anyone else. It says, "What ever was before the big bang is _something physics can't explain..!_ Is this saying true (accurate)?
What is the scientific understanding of the conditions or properties of the universe before the Big Bang, and is it possible to quantify any physical theories regarding that state?
6,437
cqadupstack-physics
96551
Why does dark energy produce positive space-time curvature?
My understanding is that dark energy, or equivalently a positive cosmological constant, is accelerating the expansion of the universe and I have read that this gives empty space-time positive curvature, ie de Sitter geometry. I also understand that parallel geodesics converge when curvature is positive and diverge when...
How does dark energy, or a positive cosmological constant, lead to positive curvature in space-time, and can you explain the relationship between accelerating expansion and the behavior of parallel geodesics in a positively curved geometry?
7,806
cqadupstack-physics
31260
Is there an analytical solution for fluid flow in a square duct?
I couldn't find one but assumed it must exist. Tried to find it on the back of an envelope, but got to an ugly differential equation I can't solve. I'm assuming a square duct of infinite length, incompressible fluid, constant pressure gradient. The flow is steady. I'm also assuming there's only flow down the duct (z di...
Determine the velocity profile \( v_z(x,y) \) for steady, incompressible flow of a fluid in a square duct of infinite length under a constant pressure gradient \( \Delta P \). Given the parameters of the system, what boundary conditions should be applied to solve the differential equation $$ \frac{\partial^2 v_z(x,y)}{...
20,269
cqadupstack-physics
134695
Recombination time for ionized atoms in a low pressure gas?
I am looking into some new physics and had the following question come up: You have a neutral gas of let's say, CO atoms at 1 nanoTorr. An electron(s) comes passing through the gas ionizing only 1% of the gas atoms. How long does it take for the gas to come back to neutrality? In other words, what is the recombination ...
Given a neutral gas of CO atoms at a pressure of 1 nanoTorr, if an electron passes through and ionizes 1% of the gas atoms, what is the expected recombination time for the gas to return to neutrality? Please provide a detailed explanation of the factors that influence recombination time and the calculations involved in...
30,359
cqadupstack-physics
63892
Underlying physical basis of an exponential distribution
My data set of upper atmospheric cloud occurrences $N$ versus their thickness (or optical brightness, say $B$) show an exponential variation over more than two orders of magnitude - that is $N$ varies as $\mathrm{e}^{-cB}$. The quantity $c$ can vary from location to location. More than one first-principle model shows t...
What are the potential physical principles or environmental factors that could lead to an exponential relationship between the occurrence of upper atmospheric clouds ($N$) and their thickness or optical brightness ($B$), as described by the equation $N \propto \mathrm{e}^{-cB}$?
36,656
cqadupstack-physics
65651
Hexadecapole potential using point particles?
We can get monopole $1/r$, dipole $1/r^2$, quadrupole $1/r^3$ and octupole $1/r^4$ potential falloff by placing opposite point charges at the corners of a point, line, square and cube, respectively. My book cryptically says "and so on", how does one get a $1/r^5$ and higher potential falloff with a finite number of poi...
How can a finite arrangement of point charges in three dimensions be configured to produce a potential that falls off with a rate of \(1/r^5\) or higher? Please provide an example of such a configuration.
15,632
cqadupstack-physics
66010
How does an atom look like in momentum space?
I am reading an article in a popular science magazine about atoms in extremely low temperature (condensation?). It's interesting and I've got few questions regarding this phenomenon. 1) In the article, the author show an figure of how the atom looks like in momentum space (like the top figure here). I'm pretty confused...
How can the momentum distribution of atoms at absolute zero temperature be described, and what is the significance of the width of this distribution in relation to zero-point energy and quantum uncertainty? Additionally, why is a Gaussian distribution often used to represent the momentum distribution of condensates, de...
3,640
cqadupstack-physics
7731
Distance in cosmology
How can we calculate the change in distance over time between (say) two galaxies that they are at rest in respect to each other? In other words, how do we modify the "classical" equation: $$ \ddot{\mathbf{r}} = -G\frac{\mu}{|r|^2}\hat{\mathbf{r}} $$ to take into account expansion, G changes over time, etc?
What is the modified form of the equation $$ \ddot{\mathbf{r}} = -G\frac{\mu}{|r|^2}\hat{\mathbf{r}} $$ that accounts for the expansion of the universe and how do changes in the gravitational constant \( G \) over time affect the calculation of distance between two galaxies at rest with respect to each other?
5,803
cqadupstack-physics
123044
Power required to keep a freezer at constant temperature
Alright, I'm completely stuck on this and so is everyone else I've asked. A freezer has a temperature Tc = -23℃. The air in the kitchen has a temperature Th = 27℃. The freezer in not perfectly insulated and heat leaks through the walls of the freezer at a rate of 50 W. Find the power of the motor that is needed to main...
A freezer maintains a temperature of -23℃ while the kitchen air temperature is 27℃. If the rate of heat leakage into the freezer is 50 W and the motor operates at a power output of 10 W to remove heat, how much heat is effectively accumulated in the freezer per second, and what will be the net heat flow into the freeze...
11,688
cqadupstack-physics
24295
Relationship between the "angle of the floor" and the angular velocity in a banked turn?
Wel, imagine that you're in a carousel, and the floor is, let's say at $\theta=0$ so it's totally horizontal, if $\theta=90$ the floor would be vertically. The object put above the floordoesn't move until the carousel starts. My question is: > With what _angular velocity_ ($\omega$) an object would have to go to stay >...
Given a carousel with a radius of \( r = 1 \) m, and an angle of the floor \( \theta \), derive the expression for the angular velocity \( \omega \) needed for an object to remain stationary above the floor, under the influence of gravity \( g = 9.8 \, \text{m/s}^2 \). Additionally, determine whether the mass of the ob...
25,666
cqadupstack-physics
86292
Zener diodes - how do they work?
I was going through some of the theory behind Zener diodes. I know what they're used to work at constant voltage, but I don't know how they work. Actually, I kind of get that too, I know that voltage is constant until breakdown occurs (avalanche breakdown), but I don't get why a minimum current is needed to maintain a ...
What is the minimum current required to maintain a constant voltage across a Zener diode in the reverse breakdown region, and how does this current relate to the diode's dynamic resistance?
14,061
cqadupstack-physics
36141
Acceleration of table tennis racket
I can't find any numbers about table tennis. What accelerations occur during a forehand smash for example? Thanks in advance & kind regards, Hans
What is the typical acceleration of a table tennis ball during a forehand smash, and how does it compare to the acceleration of the paddle used to strike it?
1,804
cqadupstack-physics
5979
Why do space crafts take off with rockets instead of just ascending like an aircraft until they reach space?
I guess it's not a very educated question, but I never quite understood why spacecrafts have to shoot up and can't just reach space by simply continuing an upwards ascent like an airplane.
What is the minimum velocity required for a spacecraft to escape Earth's gravitational pull, and how does this compare to the speeds achieved by commercial airplanes?
19,579
cqadupstack-physics
90335
Conservation of Mathematical Constraints when deriving Energy and Momentum from $F=ma$
**Background:** * Starting from $F = ma$, integrating with respect to time, and using basic calc, one can derive $\int Fdt = m (v_f - v_i)$ * Starting from $F = ma$, integrating with respect to distance, and substituting $a\ ds = v\ dv$ (from calculus), one can derive $\int Fdx = KE_f - KE_i$ (Obviously I care abou...
What type of ordinary differential equation (ODE) is represented by the expression $\int \vec{F}\cdot d\vec{s} = \frac{1}{2}m(\dot{x}_f^2 +\dot{y}_f^2 +\dot{z}_f^2 ) - KE_i$? Is it a single first-order ODE, a 'triple' first-order ODE with three dependent variables, or something else entirely? Also, how do the conservat...
27,953
cqadupstack-physics
67938
Solitonic nature of RR sources
In the famous paper by Polchinski where he shows that D-branes are sourcing RR fields, he says (before we known the result) that RR sources must be objects with tension going like $1/g_s$ (page two of the paper). How do we know that? I understand that it must be non-perturbative in $g_s$ (essentially because strings ar...
How can we derive that the tension of RR sources in string theory is proportional to \( 1/g_s \), considering that these sources must be non-perturbative in the string coupling constant \( g_s \)?
29,614
cqadupstack-physics
76442
Simulating a 1-dimensional wave on (a segment of) an infinite line
I'm trying to numerically simulate a 1-dimensional with a chain of linked harmonic oscillators as described here (the result can be seen here). The simulation behaves like a wave on a finite line segment with fixed or free boundaries (depending on the boundary conditions you set): when the wave reaches the border it bo...
What modifications can be made to a 1-dimensional chain of linked harmonic oscillators to allow energy to flow out of the system without reflecting back, effectively simulating an infinite queue of oscillators? Provide specific examples of boundary conditions or damping techniques that could achieve this.
25,472
cqadupstack-physics
31894
How does one quantize the phase-space semiclassically?
Often, when people give talks about semiclassical theories they are very shady about how quantization actually works. Usually they start with talking about a partition of $\hbar$-cells then end up with something like the WKB-wavefunction and shortly thereafter talk about the limit $\hbar\rightarrow 0$. The quantity tha...
In semiclassical theories, the quantization of the action is expressed as the integral \(\oint p \, \mathrm{d}q\), which is related to the concept of $\hbar$ and periodic orbits. Can you explain how the path of integration relates to the dynamics of a system, and what the implications are when considering the limit as ...
16,974
cqadupstack-physics
17754
Has Chandra Varma explained cuprate superconductivity?
Chandra Varma is a theoretical physicist at University of California, Riverside. A couple years ago, he gave a talk at my institution purporting to explain superconductivity in the cuprates. It all sounded so great and convincing, and I want to know what the status is with that. Here (link) (arxiv version link) is a 20...
What experimental evidence supports the theory of spontaneous breaking of time-reversal symmetry in cuprate superconductors, and how do these findings contribute to our understanding of superconductivity?
14,457
cqadupstack-physics
82443
Energy band diagram of a metal-silicon-metal device, bias voltage applied
I have an intrinsic silicon layer sandwiched in between two aluminum contacts. I'm trying to figure out the band diagram of the entire device when a positive bias (much larger than the work function of the aluminium) is applied to one of the contacts. Intuitively, I would expect the i-layer part to be tilted (like in a...
What is the expected shape of the energy band diagram for an intrinsic silicon layer sandwiched between two aluminum contacts when a positive bias significantly larger than the work function of aluminum is applied to one of the contacts? Please include an explanation of the band bending at the metal-semiconductor inter...
16,243
cqadupstack-physics
130349
Didn't we mess up with the temperature?
The following passage has been extracted from the book "The Feynman Lectures on Physics-Vol l": > The mean kinetic energy is a property only of the "temperature." Being a > property of the "temperature," and _not of the gas_ , we can use it as a > definition of the temperature. The mean kinetic energy of a molecule is ...
At absolute zero, what is the mean kinetic energy of a molecule calculated using the equation given, and how does this relate to the uncertainty principle that states atoms cannot have zero motion?
31,532
cqadupstack-physics
63645
Null vector fields given Bondi metric
I'm trying to understand how to compute the null future-directed vector fields if I have a given (Bondi) metric $g=-e^{2\nu}du^{2}-2e^{\nu+\lambda}dudr+r^{2}d\Omega$ with $d\Omega$-standard metric on the unit sphere. I was reading this paper http://www.jstor.org/stable/2118619 and there came the statement (no proof) th...
Given the Bondi metric \( g = -e^{2\nu} du^{2} - 2e^{\nu+\lambda} dudr + r^{2} d\Omega \), derive the expressions for the null future-directed vector fields \( n \) and \( l \) defined by \( n = 2e^{-\nu} \frac{\partial}{\partial u} - e^{-\lambda} \frac{\partial}{\partial r} \) and \( l = e^{-\lambda} \frac{\partial}{\...
15,748
cqadupstack-physics
1638
What is required to create water droplets of a consistent size and shape over a distance of 3 to 10 feet?
What would I need to do to create water droplets of a consistent size and shape over a distance of 3 to 10 feet? Are there any special requirements for the nozzle? Can I use pure water or should I have some kind of additive? Any special requirements on the valve, etc, that is produced?
What nozzle specifications and additives would be necessary to produce water droplets of consistent size (e.g., 0.5 mm) and shape while projecting them over a distance of 3 to 10 feet, considering factors such as pressure and valve type?
11,555
cqadupstack-physics
78643
Distribution of point charges on a line of finite length
How will $N$ freely moving charges confined to a line with length $L$ be distributed? What are their equilibrium positions?
If $N$ identical, freely moving charges are confined to a one-dimensional line of length $L$ and are repelling each other due to their like charges, what are their equilibrium positions along the line, and how are these positions mathematically expressed as a function of the number of charges $N$ and the length $L$?
11,283
cqadupstack-physics
103266
Quantum Philosophy a la John Bell
I recently discovered this website http://www.quantumphil.org/ and wondering whether Quantum Philosophy is an actual field, or just an aspect of QM? Apologies if this is in the wrong place.
What is the difference between Quantum Philosophy and Quantum Mechanics, and how can each be quantitatively distinguished in terms of their focus and contributions to the field of physics?
30,513
cqadupstack-physics
7856
Noether theorem with semigroup of symmetry instead of group
Suppose You have semigroup instead of typical group construction in Noether theorem. Is this interesting? In fact there is no time-reversal symmetry in the nature, right? At least not in the same meaning as with other symmetries ( rotation, translation etc). So why we construct energy as invariant of such kind of symme...
Can you explain the implications of using a semigroup instead of a group in the context of Noether's theorem, particularly regarding energy conservation, and provide references for any existing theories or introductory texts related to Noether's theorem and Lie semigroups?
31,518
cqadupstack-physics
22895
Are Colors Emitted at Specific Temperatures?
There are quite a few nagging questions I have been having over the years, I do not require a full explanation, just some guidance in my assumptions and pointers if I am very wrong. My basic knowledge of a lightbulb, is that the power dissipated by the tungsten filament heats it up to around 2,700–3,300K (inefficient!)...
What is the relationship between temperature and the color of light emitted by different materials, and how does this relate to concepts such as blackbody radiation and color temperature? Additionally, could you explain why flames can appear blue and what factors influence this coloration?
9,897
cqadupstack-physics
54532
How can a satellite's speed decrease without its orbital angular momentum changing?
I have no idea what the answer is. I'm supposed to answer it within 3-4 sentences.
What is the molar mass of glucose (C6H12O6), and how would you calculate it using the atomic masses of carbon, hydrogen, and oxygen?
36,578
cqadupstack-physics