_id
stringlengths
1
6
title
stringlengths
15
150
text
stringlengths
30
20.1k
instruction_seed
stringlengths
58
1.47k
__original_row_idx
int64
0
38.3k
_source
stringclasses
1 value
60337
How to determine R charge?
Ref. 1, page 15, equation (23) defines the $U(1)_V$ and $U(1)_A$ actions as $$e^{i\alpha F_V}: \Phi(x,\theta^{\pm},\bar{\theta}^{\pm}) \rightarrow e^{i\alpha q_V}: \Phi(x,e^{-i\alpha }\theta^{\pm},e^{i\alpha }\bar{\theta}^{\pm}) $$ The superfield can be written as $$\Phi(x,\theta^{\pm},\bar{\theta}^{\pm}) =x+\theta^+ \...
What are the $U(1)_V$ charges of the fields $\psi_+$, $\psi_-$, $\bar{\psi}_+$, and $\bar{\psi}_-$ in the context of the superfield representation given in the text, and how do these charges compare to those shown in Table 2 on page 17 of the reference?
21,841
cqadupstack-physics
30910
Are there any known potentially useful nontrivial irreducible representations of the Lorentz Group $O(3,1)$ of dimension bigger than 4? Examples?
Are there any known potentially useful, nontrivial, irreducible representations of the Lorentz Group $O(3,1)$ of dimension more than $4$? Examples? A $5$-dimensional representation? EDIT: Is there some deep reason why higher-dimensional representations (other than infinite-dimensional representations) are less useful?
What are the known finite-dimensional, irreducible representations of the Lorentz Group \( O(3,1) \) with dimensions greater than 4, and can you provide an example of a 5-dimensional representation? Additionally, what reasons might explain the perceived reduced utility of higher-dimensional representations?
786
cqadupstack-physics
21346
Equipartition theorem for flowing gas
If an ideal gas is flowing with a velocity $v$, how is the equipartition theorem applied. Normally, we can say that $\frac{1}{2}mv_{x,rms}^2=\frac{1}{2}k_BT$. We can do the same thing for $v_y$ &c. But, when a gas is flowing in the x direction, I don't think that $v_{x,rms}=v_{y,rms}$. I'm not too sure of this, the dis...
How does the equipartition theorem apply to a flowing ideal gas with velocity \( v \) in the x-direction, and what are the expressions for the root mean square velocities \( v_{x, rms} \) and \( v_{y, rms} \) if the gas is also constrained to move in the y-direction, assuming it follows a Maxwell-Boltzmann distribution...
27,855
cqadupstack-physics
9246
The Interactions of Light and Matter
So basically, I was trying to find a good answer to the question of how light interacts matter. Namely on the quantum level what causes matter to appear transparent, reflective, opaque, etc I came upon the answer with respect to transparency here, but I feel that the concept isn't fully explored here and that something...
What factors determine the degree of reflectivity in materials, and how does the electron distribution within a material influence its ability to reflect light with precision, as seen in mirrors compared to less reflective surfaces?
30,139
cqadupstack-physics
90858
What is the aperture in the hydraulic analogy of Ohm's law
Note: My question is duplicate of Why doesn't water come out of tap/faucet at high pressure when I turn it on?. None of the answers given there explains how the continuity equation fits properly. That's why I am asking this question. * * * I do not understand the _Hydraulic analogy_ explained on wikipedea. > I asked my...
In the context of fluid dynamics, how does the tap mechanism illustrate the principle of the continuity equation when adjusting the aperture area with a knob compared to partially covering it with a thumb? Can you quantify the flow rate changes in both scenarios, assuming the same inlet pressure and pipe diameter?
24,008
cqadupstack-physics
19449
Simple (but wrong) argument for the generality of positive beta-functions
In the introduction (page 5) of _Supersymmetry and String Theory: Beyond the Standard Model_ by Michael Dine (Amazon, Google), he says > (Traditionally it was known that) the interactions of particles typically > became stronger as the energies and momentum transfers grew. This is the > case, for example, in quantum el...
What is the simple argument, based on unitarity and relativity, that suggests particle interactions become stronger at higher energies, and what are the key reasons why this argument is considered incorrect?
16,371
cqadupstack-physics
90906
What is this vector problem asking to find, the magnitude of the force F or the component of it that goes along the ramp?
A shopper pushes a 7.5-kg shopping cart up a 13 (degree)incline. Find the magnitude of the horizontal force, F, needed to give the cart an acceleration of 1.41 m/s$^2$. I ask this because the solution to this problem is $7.5[1.41 + 9.81\sin(13)] = 27.1$, which describes the component of the force along the direction of...
What is the magnitude of the horizontal force needed to accelerate a 7.5-kg shopping cart up a 13-degree incline at 1.41 m/s², taking into account the gravitational force acting on the cart along the incline?
33,447
cqadupstack-physics
60790
Solar Catastrophe
Consider all of sudden the sun vanishes. What would happen to planetary motion. Will it continue to move in elliptical path or move in a tangential to the orbit immediately after sun vanishes or move in elliptical orbit for some time after the vanishing of sun or any other cases? If so, please explain...
If the Sun were to suddenly vanish, how would the planetary orbits be affected in terms of their motion? Specifically, what path would the planets take immediately after the disappearance of the Sun: would they continue in their elliptical paths, move tangentially to their orbits, or follow another type of trajectory? ...
3,240
cqadupstack-physics
41702
Doppler cooling limit vs recoil limit
I was discussing laser cooling in class today and I understood that the main principle of the process is to tune a laser to a frequency lower than the absorbtion frequency of the atom and so only the atoms with a certain velocity will absorb the photons. These atoms then re-emit a photon in a random direction thus on a...
What is the difference between the Doppler cooling limit and the recoil limit in laser cooling, and how does each limit affect the cooling efficiency of atoms?
17,160
cqadupstack-physics
8663
Why is the contribution of a path in Feynmans path integral formalism $\sim e^{(i/\hbar)S[x(t)]}$
In Feynman's book "Quantum Mechanics and Path Integrals" Feynman states that > the probability $P(b,a)$ to go from point $x_a$ at time $t_a$ to the point > $x_b$ at the time $t_b$ is $P(b,a) = \|K(b,a)\|^2$ of an amplitude $K(b,a)$ > to go from $a$ to $b$. This amplitude is the sum of contributions > $\phi[x(t)]$ from ...
Why is the contribution of a path in the path integral formulation of quantum mechanics expressed as $\phi[x(t)] \sim e^{(i/\hbar)S[x(t)]}$, and what are the implications if it were expressed in a different form, such as $\sim \frac{S}{\hbar}$ or $\sim \cos(S/\hbar)$?
26,486
cqadupstack-physics
118638
Problem about thermodynamic relations
We know that for constant pressure thermodynamic processes, $dH=dQ_p$. My question is, does it implies that only reversible work is possible in this processes so that $dw=0$ because $dv$ is zero? In addition, does $Q_v$ necessarily be reversible heat transfer in this case? What if the heat transfer is irreversible? Sim...
In a constant pressure thermodynamic process involving an ideal gas, if the process is irreversible, how would you characterize the relationship between the change in enthalpy \( dH \), the heat transfer \( dQ_p \), and the work done \( dw \)? Specifically, can \( dQ_p \) be seen as equal to \( dH \) when heat transfer...
7,324
cqadupstack-physics
103074
Which types of particles are affected by the wave-particle duality?
If we take the double slit experiment as a way of demonstrating the wave- particle duality, which types of particles would show an interference pattern? For example, I know that electrons show such a pattern. But do protons, too? What about atoms? Where is the boundary between "wavey particles" and "classical particles...
Which types of particles, such as electrons, protons, and atoms, can exhibit an interference pattern in a double slit experiment, and what is the threshold in terms of mass or scale at which particles transition from exhibiting wave-like behavior to behaving more like classical particles?
3,357
cqadupstack-physics
18340
Can you magnetize iron with a hammer?
We know that a piece of ferromagnet, such as iron, can be magnetized by putting in a strong magnetic field to get domains parallel to the field grow. I also remember from pop. culture and MacGyver old tv series that you can magnetize a piece of iron by hitting it hard, with a hammer say, along the same direction. 1-Is ...
How does the process of striking a piece of iron with a hammer lead to its magnetization, and what is the underlying physical principle? Additionally, what is the effect of this process on nonferromagnetic materials?
16,773
cqadupstack-physics
32363
Why do we consider the evolution (usually in time) of a wave function?
Why do we consider evolution of a wave function and why is the evolution parameter taken as time, in QM. If we look at a simple wave function $\psi(x,t) = e^{kx - \omega t}$, $x$ is a point in configuration space and $t$ is the evolution parameter, they both look the same in the equation, then why consider one as an ev...
Given the wave function \(\psi(x,t) = e^{kx - \omega t}\), where \(x\) is a point in configuration space and \(t\) is time, derive the probability density \(|\psi(x,t)|^2\) and show how it changes with respect to time \(t\) for fixed positions \(x\). Additionally, explain the physical significance of this time dependen...
25,422
cqadupstack-physics
76751
How would one show that a nonabelian field strength tensor transforms in a certain way under a local gauge transformation?
How would one show that the nonabelian ${F_{\mu\nu}}$ field strength tensor transforms as ${F_{\mu\nu}\to F_{\mu\nu}^{\prime}=UF_{\mu\nu}U^{-1}}$ under a local gauge transformation? Rather than going through this in a very manual manner (i.e., gauge transform ${A_{\mu}\to A_{nu}^{\prime}}$ and use the explicit expressi...
How can you demonstrate that the nonabelian field strength tensor \( F_{\mu\nu} \) transforms as \( F_{\mu\nu}' = U F_{\mu\nu} U^{-1} \) under a local gauge transformation by first showing the transformation \( D_{\mu}' = U D_{\mu} U^{-1} \) and then applying it to the commutator relation \( [D_{\mu}, D_{\nu}] \)?
5,540
cqadupstack-physics
57232
Zeolite-based oxygen concentrators
I wonder, what is content of output of zeolite-based pressure swing adsorption oxygen concentrators (both oxygen output, and exhaust output)? Yes, they can produce 95% oxygen. But what's the remaining 5%? Is it just argon and other noble gases, or some air contaminants could also be concentrated (like CO2, NO2, CO)? An...
What are the typical percentages of gases present in the exhaust output from a zeolite-based pressure swing adsorption oxygen concentrator, specifically focusing on the composition of the remaining 5% when 95% oxygen is produced? Could you provide quantitative data or references to studies that analyze the gas composit...
29,212
cqadupstack-physics
92286
Loss of atmosphere to a vacuum
I'm working to craft a space-horror themed RPG a la Dungeons & Dragons and I've run into a situation I can't resolve on my own. At what rate is atmosphere lost to space through various sized apertures? I'm looking generally at these sizes(in diameter) 10' 5' 30" 15" 7" 3" 1" Trying to determine how quickly the cabins/h...
What is the rate of atmospheric loss to space through apertures of varying diameters (10 feet, 5 feet, 30 inches, 15 inches, 7 inches, 3 inches, and 1 inch) under standard conditions, and how would this affect the decompression time of a sealed cabin in deep space?
5,438
cqadupstack-physics
15427
What happens if you x-ray an x-ray?
The title largely sums up my question, what does happen if you either x-ray an x-ray, or point two x-ray generators at each other?
What are the physical effects or interactions that occur when two X-ray beams intersect, and how does this compare to the effect of directing an X-ray beam at another X-ray source?
12,467
cqadupstack-physics
44178
Are there any electro-optic crystals that are also pyroelectric but not birefringent?
As the title says, a crystal that is electr-optic and pyroelectric can it be non-birefrigent?
Is it possible for a crystal to exhibit both electro-optic and pyroelectric properties while also being non-birefringent, and if so, provide examples of such crystals?
25,935
cqadupstack-physics
127115
Electrodynamic multipole expansion
I am reading Jackson, Classical Electrodynamics, and I have a question regarding the electrodynamic multipole expansion (with page numbers I refer to the 3rd edition). So on page 409, he gives in equation 9.9 the general formula for the expansion of the vector potential: $$\lim_{kr \rightarrow \infty} \mathbf A (\mathb...
What are the expressions for the electric octupole moment and the magnetic quadrupole tensor in the context of the electrodynamic multipole expansion, and is there any published research that details the decomposition of the vector potential at these orders or higher?
16,529
cqadupstack-physics
117325
Hyper surface orthogonal vector in Boyer-Lindquist coordinate
The Boyer-Lindquist coordinate coordinate of the Kerr Solution is $$ ds^2=\left(1-\frac{2Mr}{\Sigma}\right)dt^2+\frac{4Mar\sin^2\theta}{\Sigma}dtd\phi - \frac{\Sigma}{\Delta}dr^2-\Sigma d\theta^2-\left(r^2+a^2+\frac{2Ma^2r\sin^2\theta}{\Sigma}\right)\sin^2\theta d\phi^2 $$ Let $$ K=\frac{\partial}{\partial t}=(1,0,0,0)...
In the context of the Boyer-Lindquist coordinates of the Kerr Solution, determine under what conditions the vector field \( K = \frac{\partial}{\partial t} \) can be hypersurface orthogonal. Specifically, what condition must be satisfied for the cross term \( g_{t\phi} \) in the metric to vanish, and why does this impl...
28,486
cqadupstack-physics
34921
Quantum mechanics on Cantor set?
Has quantum mechanics been studied on highly singular and/or discrete spaces? The particular space that I have in mind is (usual) Cantor set. What is the right way to formulate QM of a particle on a Cantor set? I can only guess that: i) There will be no momentum operator. ii) Hilbert space will be spanned by position v...
What would be the Hamiltonian operator for a quantum particle confined to the Cantor set, and how would it differ from the standard Hamiltonian in conventional quantum mechanics?
25,875
cqadupstack-physics
123063
Is space-time a Kantian concept - just a concept of the working mind?
1. Is space time a Kantian concept – that is, just a concept of the mind at work? That is that there is no ‘out there’ – it’s in the ‘mind’? 2. Relativity might work but it certainly requires a stretch of the imagination to accept for example that the speed of light is constant. Think about that, that if we rode on a...
What is the significance of the speed of light in Einstein's theory of relativity, and how does it challenge our understanding of time and space? Specifically, can you explain the implications of light's constant speed on our perception of past and future events?
10,292
cqadupstack-physics
52144
Relationship between Mars and Earth rotation
Is it by pure random chance that Mars and the Earth have nearly the same day duration (Mars day is barely 40 minutes longer, which is just 3% difference), or there is some causal relationship between the two?
What is the percentage difference in the length of a day between Mars and Earth, and what factors might contribute to similarities in day duration among the terrestrial planets?
37,687
cqadupstack-physics
97913
Twin paradox with two intertial frames in general relativity
I assume the twin paradox from special relativity is well known. I wish to focus on the apparent symmetry of the problem: both observer seems to move away from each other, and then come back. Yet, the outcome is asymmetrical. That paradox is resolved because the travelling twin has to turn around at some point. Then he...
In a scenario where one twin travels past a strong gravitational field created by a couple of stars, both twins remain in their own inertial frames without any acceleration. If the traveling twin moves away from the stationary twin and then returns, how do their ages compare when they reunite, and what is the underlyin...
33,540
cqadupstack-physics
111302
Changing Coordinate Systems in Two-Loop Integrals
Suppose we have the two-loop integral $\int \mathrm{d} ^ 4 k _ {2} \int \mathrm{d} ^ 4 k _ {1} \, f(k _ {1}, k _ {2})$, where $k _ {1}$ and $k _ {2}$ are four-dimensional vectors in Euclidean space. In the first integration with respect to $k _ {1}$, I take $k _ {2}$ to be the z-axis. Then $k _ {2} = k _ {1} \cos \omeg...
Is it valid to change the coordinate system from using one four-dimensional vector $k_2$ aligned with the z-axis to a spherical coordinate system for the second integration, and can the spherical volume element for the second integration be expressed as $2 \pi^2 |k_2|^3 \, d|k_2|$?
37,804
cqadupstack-physics
21200
How to test whether galaxies are moving away from each other in a static background or whether space is being created beween them?
Observations show that galaxies are moving away from one another on the macroscopic scale. Now, scientists interpret this by saying this happens not because galaxies are really moving away from each other in a static background but because more and more space is created between galaxies. Now how scientists can distingu...
How can scientists use the redshift of light from distant galaxies to differentiate between galaxies moving through static space versus the expansion of space itself, and what quantitative data supports the latter interpretation?
27,444
cqadupstack-physics
24520
Neutrino Oscillation and their gravitational implications
As I understand neutrinos, there are three different flavors, all with different masses. Although the masses of these neutrinos have not been directly measured, their mass differences have been. Current experiments, KATRIN and Project8 are going to measure neutrino masses and we shall know soon enough. Regardless, thei...
How would you quantify the difference in gravitational wave intensity at a point in space if a constant stream of oscillating neutrinos passes by, compared to a stream of neutrinos that do not oscillate?
9,321
cqadupstack-physics
37788
What is the fundamental reason for noise?
I have read that noise is a result of there being "no such thing as a perfect one-way valve". That energy transfer is never perfectly one-way; there will always (at some level) a finite flow of energy from output to input. I understand this much, but what is the fundamental reason for this? Does it have its roots in th...
What is the relationship between thermodynamics and measurement noise, specifically in terms of the energy transfer between two systems?
34,517
cqadupstack-physics
25319
What's the best way to start out with astrophotography on a tight budget?
I'm new to astronomy and I don't have a great deal of cash to spend. I currently have a 3" reflector telescope which I've had great fun with. I also have a Pentax DSLR which I've been using to take long exposure photos of various constellations (+ brighter deep sky objects such as the Orion nebula). I've managed to tak...
What are the advantages and disadvantages of using a DSLR camera mounted on a 3" reflector telescope versus a webcam eyepiece attachment for astrophotography, particularly in terms of image quality and ease of use?
2,173
cqadupstack-physics
25365
AGN accretion disk vs. torus
The torus is the donut of dust encircling the Active Galactic nucleus. The accretion disk is inside the torus. Is there a boundary between the two? At what point does a torus become an accretion disk? What are their differences?
What is the typical distance from an Active Galactic nucleus at which the torus of dust ends and the accretion disk begins, and how does this distance vary depending on the mass of the central supermassive black hole?
38,295
cqadupstack-physics
31702
transformations with commutators and anticommutators that generate displacements
is well known that composition of point reflections generate pure displacements. This implies that the commutator of two point reflections will be a pure displacement. Are there similar elemental transformation operations which can generate pure displacements from their **anticommutators**?
What are the conditions under which the anticommutator of two elemental transformations in a Euclidean space results in a pure displacement, and can you provide a mathematical example to illustrate this?
35,314
cqadupstack-physics
13620
Importance of Kohn anomaly?
What is practical importance of Kohn anomaly for experimentalists and/or theorists?
How does the presence of a Kohn anomaly in a material's electronic structure affect its thermal and electronic conductivity, and what quantitative measurements can experimentalists use to validate these effects?
5,732
cqadupstack-physics
48110
How can the surface of a liquid exist if there are no attracting molecules above it?
Okay this is probably a stupid question but here goes: We know that molecules in a liquid are attracted from all the molecules around it so there is no net attraction. Well, then how do the molecules at the surface exist because there are only molecules below it and not above it? Won't they accelerate downwards? Also, ...
How does the imbalance of forces experienced by molecules at the surface of a liquid contribute to the phenomenon of surface tension, and what is the quantitative relationship between surface tension and the properties of the liquid, such as temperature and molecular interactions?
14,562
cqadupstack-physics
102082
Does limit $\hbar \rightarrow 0$ in Quantum Mechanics mean anything?
Assuming that I learn Quantum Mechanics first, and then I approach Classical Mechanics as a special case of Quantum Mechanics, I will definitely find the relationship between Quantum Mechanics and Classical Mechanics very confusing. I don't know how to make sense of what happens when $\hbar \rightarrow 0$. For one, you...
What happens to the Schrödinger equation in the limit as \(\hbar \rightarrow 0\), and how does this limit help us understand the relationship between Quantum Mechanics and Classical Mechanics?
26,210
cqadupstack-physics
130542
Toy models of asymptotic safety?
Are there some toy model QFTs where the asymptotic safety scenario is realized?
In the context of toy model quantum field theories (QFTs), can you provide two specific examples where the asymptotic safety scenario is realized?
19,427
cqadupstack-physics
12284
What's the definition of the time ordering operator for more than two particles?
For two particles, $\langle {\mathcal T} a(t_1) a^\dagger (t_2) \rangle = \langle a(t_1) a^\dagger (t_2)\rangle \theta (t_1-t_2) + \xi \langle a^\dagger (t_2)a(t_1) \rangle \theta (t_2-t_1)$ with $\xi$ is a plus sign for bosons and a minus sign for fermions. How would I write, for example, $\langle {\mathcal T} a(t_1) ...
How can you express the time-ordered expectation value $\langle {\mathcal T} a(t_1) a^\dagger (t_2) a(t_3) a^\dagger (t_4) \rangle$ for two fermions and two bosons, including the appropriate signs and conditions based on the temporal order of the operators?
10,527
cqadupstack-physics
112994
Polarization vectors in scattering amplitudes
The annihilation ($e^+ e^-\rightarrow 2\gamma$) diagrams are ![Annihilation \(time goes upwards\)](http://i.stack.imgur.com/3nUwx.png) I'm just wondering if the amplitudes should be $$(-ie)^2\left[\bar v(p_2)\gamma^b\epsilon_b^*\frac{-i(-(\gamma^\mu p_{1\mu}-\gamma^\nu p_{3\nu})+m)}{(p_1-p_3)^2+m^2-i\epsilon}\gamma^a\e...
In the context of the annihilation process \(e^+ e^- \rightarrow 2\gamma\), how does the transformation of the polarization vector \(\epsilon^a \rightarrow \epsilon^a + \alpha k^a\) (where \(\alpha\) is a constant and \(k^a\) is a four-momentum vector) result in an unchanged amplitude? What is the physical significance...
4,539
cqadupstack-physics
51604
Is the time of collapse of the wave function empirical?
Is the time of the collapse of the wave function empirical? Suppose there is a very long von Neumann chain of observations of a quantum system. Suppose also practically irreversible decoherence happens very early along the chain. We can have an entire class of models parameterized by the point along the chain past the ...
Given a quantum system with a von Neumann chain of observations that experiences irreversible decoherence, how can we quantitatively measure or distinguish between different models of wave function collapse based on the timing of observed outcomes? Specifically, if the decoherence occurs at a certain point, can we dete...
4,001
cqadupstack-physics
5398
converting force from spherical to Cartesian coords
So I am working on my assignment, and have a question about converting coordinates. I dont know whether I should ask here or the math SE, so lets give it a try here. The force in question is $$\vec{F} = -k\,r^{-n}\,\hat{r}$$ I know the conversion equations but I have no idea how to do it. I need to split the $\hat{r}$ ...
Given the force field defined by the equation \(\vec{F} = -k\,r^{-n}\,\hat{r}\), where \(k\) is a constant, \(n\) is a positive integer, and \(\hat{r}\) is the unit vector in the radial direction in spherical coordinates, express \(\hat{r}\) in terms of Cartesian coordinates \( \hat{i}, \hat{j}, \hat{k} \), and then ca...
33,432
cqadupstack-physics
13155
How to know the time a disc takes to stop from rotating and the numbers of revolutions
Assuming I rotate a disk, I want to know how long it takes to completely stop, and the number of revolutions it made since I removed my fingers off the disk. Lets say a DVD I rotate with my fingers. I only know the radians per second (velocity) of the last moment I touched the disc. Can you guys tell me where to start?...
Given a DVD that I rotate with my fingers, if I know the initial angular velocity in radians per second (ω₀) at the moment I stop applying force, and the frictional torque (τ) acting on the disk is constant, how can I determine the time (t) it takes for the disk to come to a complete stop and the total number of revolu...
27,065
cqadupstack-physics
134274
Can resistance be directional?
When we think of resistance, we always think of a scalar value associated with a piece of a material. After all, resistance is but resistivity times surface geometry. But can resistance be directional meaning that it is stronger in one direction but weaker in another?
Is it possible for a material to exhibit anisotropic electrical resistance, meaning that its resistance has different values when measured along different axes, and if so, how can the directional resistance be quantified in terms of resistivity and geometry?
28,039
cqadupstack-physics
2347
Best (most realistic) physics game?
Inspired by a similar post, I wanted to know what video games, past or present, most accurately employ the laws of physics. I believe this is an appropriate question for this site, since the users are far more qualified to answer it than anyone on typical gaming sites, who think they know a lot more about physics than ...
What is the average coefficient of restitution observed in a popular video game that claims to employ realistic physics, and how does it compare to the typical value of 0.5 for inelastic collisions in real-world scenarios?
13,779
cqadupstack-physics
22896
Why is compressible flow near the choke point so efficient?
Imagine a steady state, one-dimensional, compressible flow in a horizontal pipe of constant cross sectional area. This flow can be isothermal, adiabatic (Fanno), or diabatic (Rayleigh). As an example, the relevant macroscopic energy balance for Fanno flow is: $$\Delta h=-\Delta (KE)$$ In other words, Fanno flow conve...
In a one-dimensional, steady-state Fanno flow of a compressible gas, if the flow approaches choke conditions at Mach 1, what is the relationship between the change in kinetic energy and the change in enthalpy, and how does this affect the entropy generation in the flow? Quantify the efficiency of enthalpy conversion to...
31,875
cqadupstack-physics
104839
Solve Eigenvalues for Particles enclosed in a hard surface?
Is there a way to calculate the energy eigenvalues for a particle enclosed in an impenetrable enclosing surface? I tried evaluating the Fourier transformation of the Laplacian operator \begin{align} \int_V e^{-i\bar{k}\cdot \bar{x}} \nabla^2 \psi \ dV \end{align} to use the surface integrals to reveal the momentum eige...
What are the energy eigenvalues for a particle of mass \( m \) confined in a three-dimensional cubic box of side length \( L \) with impenetrable walls?
7,618
cqadupstack-physics
41423
What happens to the Lagrangian of the Dirac theory under charge conjugation?
Consider a charge conjugation operator which acts on the Dirac field($\psi$) as $$\psi_{C} \equiv \mathcal{C}\psi\mathcal{C}^{-1} = C\gamma_{0}^{T}\psi^{*}$$ Just as we can operate the parity operator on the Lagrangian, and we say that a theory has a symmetry if $$\mathcal{P}\mathcal{L}(t,x^{i})\mathcal{P}^{-1} = \ma...
What is the condition for the Dirac Lagrangian to remain invariant under the charge conjugation operator, and how does the transformation of the Dirac field, expressed as $\psi_{C} = C\gamma_{0}^{T}\psi^{*}$, affect the Dirac equation?
38,104
cqadupstack-physics
24105
Would this model of a boat move according to Newtons 3rd Law?
If i have a small toy boat with a sail, and i attach a fan onto it, FACING THE SAIL, which runs by solar. Once the fan turns on will the boat move or will it remain at rest. Apparently it wont because according to Newtons third law the sail will give an equal force back on to the air pushed by the fan. But that doesnt ...
If a toy boat with a sail has a fan attached to it that faces the sail, and this fan is powered by solar energy, will the boat move when the fan is turned on? Explain the reasoning behind your answer in terms of Newton's third law of motion and the mechanics of wind-powered boats.
17,894
cqadupstack-physics
70327
Do celestial objects experience drag from the near vacuum of space?
For instance do the planets around the sun experience drag from the near vacuum of space? Or do the (hydrogen) atoms in interplanetary have a mean velocity near orbital speeds? And if so would (small) celestial objects orbiting the sun in the opposite direction (not sure if these would all me comets, or also might be a...
What is the expected drag force experienced by a small celestial object, such as an asteroid, orbiting the Sun at a distance of 1 astronomical unit, when accounting for the mean atomic density and velocity of hydrogen atoms in interplanetary space? Calculate the resulting change in orbital energy over a time period of ...
13,494
cqadupstack-physics
107050
What is the smallest particle exhibiting gravitational properties?
I've long been taught that all matter having mass, possesses attractive forces somewhat akin to gravity. As such, imagine we can 'teleport' a gravitonic detection device that can accurately measure the gravitational forces regardless of strength present at each location, it can detect all gravitational forces ordered b...
What is the relationship between gravity and pressure at the Earth's center, given that gravitational forces are theoretically nullified at that point, and how does this impact our understanding of matter density?
18,041
cqadupstack-physics
44971
What is the physical meaning of retarded time?
Consider this figure ![A charge $e$ moves with certain velocity $\\mathbf v_e$](http://i.stack.imgur.com/epLm6.jpg) Now, when I measure a field produced by the charge $e$ at the point $\mathbf r$, at the time $t=t_1$, it means that the charge sent the signal field at the time $t=t_r$, where $t_1$ and $t_r$ are related ...
In the context of electromagnetism, how does the time \( t_r \) relate to the observation of the electric field produced by a moving charge \( e \) at the position \( \mathbf{r} \), and what does it physically represent in terms of the signal propagation from the charge to the point of observation? Specifically, can yo...
37,997
cqadupstack-physics
52959
Radiance equation
I am trying to understand the equation of the radiance, but there is one thing i don't understand: $L_r = \frac{d^2\Phi}{d\omega \space dA\cos{\theta}}$ Why is that second exponent there in the numerator? Thanks ahead!
What is the physical significance of the term \( d^2\Phi \) in the equation for radiance \( L_r = \frac{d^2\Phi}{d\omega \space dA\cos{\theta}} \), and how does it relate to the energy flow in a specified direction?
18,208
cqadupstack-physics
54812
Vanishing of photon one-point function in QED
I would like to know why the photon one-point function vanishes in QED. I am aware that any $n$-point functions vanishes for odd $n$ because of 'charge- conjugate" argument, this does not apply to $n=1$ case. Here I want to know how to see the quantity $$ \int \frac{d^4x}{(2\pi)^4}tr\left[ \gamma^a(\frac{1}{-k+m})\righ...
Why does the integral $$ \int \frac{d^4x}{(2\pi)^4} \text{tr}\left[ \gamma^a\left(\frac{1}{-k+m}\right)\right] $$ vanish in Quantum Electrodynamics (QED), and what is the significance of the trace over gamma matrices in this context?
11,865
cqadupstack-physics
71664
Origin of crossing relations in relativistic scattering amplitudes
What is the origin of crossing relations in relativistic scattering amplitudes? At first I thought it was CPT, but then it turned out that was not correct. That is, what is the formal reason that the same function $A(s,t)$ describing the process $A+B\rightarrow C+D$ can also be used to describe the crossed- reaction $A...
What is the mathematical relationship between the Mandelstam variables $s$ and $t$ in relativistic scattering amplitudes, specifically in the context of the crossing symmetry, and how are these variables transformed when describing the scattering process $A+B\rightarrow C+D$ compared to the crossed reaction $A+\overlin...
32,219
cqadupstack-physics
11860
Accidental benefits of seeking perpetual motion? (Science history)
Newton spent much of his life in the fruitless pursuit of alchemy, but along the way discovered and worked-out much else that was real, practical science. And I was thinking about why it is that we can safely dismiss anyone who claims to have invented a perpetual motion machine, but then I thought: even when we fail to...
Can you provide an example of a significant scientific discovery or innovation that resulted from a failed attempt to create a perpetual motion machine or another similarly impossible invention?
8,636
cqadupstack-physics
112761
Why doesn't Lenz's law predict the behavior of a rod on springs in a magnetic field?
This comes from one of the free response questions from the AP Physics B 2014 exam. > ![diagram of rod suspended by springs in magnetic > field](http://i.stack.imgur.com/i3Qo2.png) > > 5\. (15 points) A conducting rod of mass $m$ and length $L$ hangs at rest > from two identical conducting springs, each with spring con...
A conducting rod of mass \( m \) and length \( L \) hangs at rest from two identical springs with spring constant \( k \). When a battery is connected, a current \( I \) flows through the rod in a uniform magnetic field \( \mathbf{B} \) directed into the page. If the rod is displaced downward and reaches a new equilibr...
11,900
cqadupstack-physics
49887
What are the resulting forms of energy after thermal equalization
When two bodies of matter are placed together, one hotter than the other, where does the energy go when the two temperatures equalize? Is there any energy in thermal difference at all? If not, how else does the thermoelectric effect work?
If two bodies of matter with different temperatures are brought into thermal contact and allowed to reach thermal equilibrium, what is the change in internal energy of the system, and how can this be quantified in terms of heat transfer?
7,684
cqadupstack-physics
108475
Looking for the name of a physical phenomenon in fluids' mechanics
I have not even an idea about how I would search for that on Google, that is why I'm trying my chance here. As electrical engineer I have no clue about fluid mechanics. We all now that when water is pumped very fast into firefighters tube, it gets very rigid and tends to be straight. What is this effect called, I'm int...
What is the phenomenon called when a fire hose becomes rigid and straight when water is pumped quickly through it, and what are the forces involved in its transition from a folded to a straight position?
20,859
cqadupstack-physics
126596
Pressures in multiple hydraulic drive system circuits when driving common drive shaft
Assume that there are two 'idealised' and identical hydraulic drive system circuits each consisting of a connected positive displacement pump and hydraulic motor where both motors (from each independent circuit) are connected to the same drive shaft. Thus, the motor RPMs are mechanically synchronized. Assume that there...
In an idealized hydraulic drive system with two identical circuits connected to the same drive shaft, if both pumps provide equal flow, will the pressures in each circuit always remain equal, or can one circuit develop a higher pressure than the other while supplying different amounts of torque? What factors might lead...
29,860
cqadupstack-physics
105153
Is it possible that Cauchy stress be asymmetric?
According to conservation of linear momentum and angular momentum, one can derive that Cauchy stress tensor is symmetric and hence has only 6 independent components. Is it possible that, when breaking one or both of conditions, Cauchy stress tensor is not symmetric?
If the conditions of conservation of linear momentum and angular momentum are not satisfied in a given system, what is the maximum number of independent components that the Cauchy stress tensor could have?
20,079
cqadupstack-physics
43691
Spinors Under Spatial Reflection
![enter image description here](http://i.stack.imgur.com/GkwGl.jpg) How eq(4.4) is a solution of eq(4.3)
Demonstrate that the solution \( y = e^{kx} \) satisfies the differential equation \( \frac{dy}{dx} = ky \) for a constant \( k \). What conditions must be met for this relationship to hold true?
28,256
cqadupstack-physics
129232
How can I describe an equation for multiple objects over time?
Lets say i have $n$ different objects that effects each other only by the classic gravity force. I have their initial locations, masses and velocity's: $$ x_1(0),\cdots,x_n(0) $$ $$ m_1,\cdots,m_n $$ $$ v_1(0),\cdots,v_n(0) $$ Is it possible to describe each object location with an equation? $$ x_i(t)= ? $$ I tried doi...
Given $n$ different objects with initial positions $x_i(0)$, masses $m_i$, and initial velocities $v_i(0)$ under the influence of classical gravity, derive the equations of motion for each object $x_i(t)$ as a function of time, expressing the gravitational interactions between them. Can you provide an effective method ...
24,882
cqadupstack-physics
133839
Is negative mass for a bound system of two particles forbidden?
Is there any theorem that forbids the bound system of two massive particles to have negative mass?
What implications does the concept of negative mass have on the stability and behavior of a bound system composed of two massive particles, and is there a mathematical theorem that addresses this scenario?
3,784
cqadupstack-physics
127619
How does it seem to be that space/time always equals c?
Given the way objects move, they seem to be going all the same "velocity" so to speak, that velocity being the speed of light. Except, velocity is displacement/time, so if something goes faster, the displacement is equally balanced by the reciprocally changing time factor so that it always balances out to 299,792,458 m...
Given the equation \( E = \frac{mc^2}{\sqrt{1-\frac{v^2}{c^2}}} \), where \( c \) is the speed of light in a vacuum (approximately \( 299,792,458 \) m/s), how would the relativistic mass of an object change as its velocity approaches \( c \)? Specifically, calculate the relativistic mass of an object with a rest mass o...
24,628
cqadupstack-physics
30080
How important are constrained Hamiltonian dynamics and BRST transformation as a formalism?
I am to study BRST transformations, for which I'm currently trying to understand constrained Hamiltonian dynamics to treat systems with singular Lagrangians. The crude recipe followed is Lagrangian -> Hamiltonian -> Dirac brackets and their quantization. I have been told that these techniques are used in QFT, string th...
What is the role of BRST transformations in modern theoretical physics, specifically in the context of constrained Hamiltonian dynamics and quantum field theory, and how do they compare to traditional Lagrangian methods?
34,054
cqadupstack-physics
1251
Why is it hopeless to view differential geometry as the limit of a discrete geometry?
This is a follow-up question to Introductions to discrete space-time: Why is this line of thought hopeless? > Classical mechanics can be understood as the limit of relativistic mechanics > $RM_c$ for $c \rightarrow \infty$. > > Classical mechanics can be understood as the limit of quantum mechanics > $QM_h$ for $h \rig...
As the parameter \(\lambda\) approaches 0 in a discrete geometry \(\Gamma_\lambda\), what quantitative characteristics of classical mechanics emerge, and how can these be mathematically expressed or verified in terms of classical mechanics' equations of motion?
18,408
cqadupstack-physics
81638
Electron motion in a wire
For my introductory course to electromagnetism (I'm an undergraduate student, so ELI5), I'm trying to get the right conceptual model of electron movement in a thin wire (with constant but non-zero cross section, like a cylinder) due to a constant current. It seems to me, that there are several contributing factors, and...
What are the dominant factors influencing electron motion in a typical copper wire carrying a constant DC current, and how do these factors compare in terms of their effects on the order of electron flow? Please provide a quantitative analysis or model, if possible.
11,516
cqadupstack-physics
125976
Is it possible to overload a lightning rod?
A couple of weeks ago we had a big storm roll through the Chicago area. I watched as the city's skyscrapers were struck multiple times by lightning throughout the night and told my coworker about it the next morning. That got us both thinking, is there a maximum load that a lightning rod/lightning dissipation system ca...
What is the maximum current a typical lightning rod can safely handle during a lightning strike, and what would be the minimum duration or intensity of a lightning strike required to potentially damage or overload a lightning rod installed on a skyscraper like the Sears Tower?
36,342
cqadupstack-physics
66738
Is Brownian motion a deterministic system?
Is Brownian motion a deterministic system? I.e the motion of all particles are completely determined or is there an innate indeterminism like quantum systems?
Can you explain how Brownian motion differs from quantum systems in terms of determinism and indeterminism?
12,553
cqadupstack-physics
114160
Latent heat of condensation
Regarding atmospheric processes, I understand that energy is required to evaporate water by moving molecules further apart i.e. a phase change from liquid to gas. The air then ascends into the atmosphere before cooling and releasing latent heat as the water molecules condense. This is often stated to be an important he...
How is latent heat released to the surrounding air during the condensation of water vapor in the atmosphere, considering that gas is a poor conductor of heat?
20,033
cqadupstack-physics
83435
Is information propagated across a medium in any other way than waves?
Is information propagated in any other way than waves? Please distinguish "propagation across a medium" from information "storage within stable states of matter", which might difuse or interact chemically. Information might be stored in stable configurations of matter, which might diffuse, or interact chemically (odor,...
What are the key differences in propagation characteristics between wave-based information transfer (such as sound and electromagnetic waves) and non-wave-based mechanisms (such as chemical diffusion or stable configurations of matter), specifically in terms of range and energy dissipation?
1,089
cqadupstack-physics
23876
Coulomb potential energy functional derivative
I'm having problem understanding how to compute a functional derivative when it's involved more than one integral, such as the coulomb potential energy functional: $$ J[\rho] = \frac 12\int \frac{\rho(r)\rho(r')}{|r - r'|} drdr' $$ According to the functional derivative formula I should do something on these lines: $$ ...
How do you correctly compute the functional derivative of the Coulomb potential energy functional given by $$ J[\rho] = \frac{1}{2} \int \frac{\rho(r) \rho(r')}{|r - r'|} dr dr', $$ with respect to the charge density $\rho(r)$? Specifically, can you show the step-by-step process that leads to the correct result, in...
35,853
cqadupstack-physics
79773
The relation between electric field and magnetic potential
In every electrodynamics book there is one chapter on special relativity which includes one section about" covariant formulation of electrodynamics" which uses tensor to describe the two fields and the four potential and lorentz force etc. and unifies maxwell's equation in a simple way. The problem encountered is the r...
Given the two formulations of the electric field \( \vec{E}=\frac{\partial \vec{A}}{\partial t} - \nabla V \) and \( \vec{E}=-\frac{\partial \vec{A}}{\partial t} - \nabla V \), identify which of these correctly describes the electric field in terms of the vector potential \( \vec{A} \) and the scalar potential \( V \) ...
5,716
cqadupstack-physics
55308
What if Felix Baumgartner went the other way?
How much harder would it have been for Felix to use some powered sled and head for the ISS when he stepped out of his capsule? He was already above most of the atmosphere. BTW, Is that capsule still up there? Why don't more missions use balloons for the first stage?
What is the approximate altitude of the International Space Station (ISS) above Earth's surface, and how does this altitude compare to the Kármán line, which is commonly recognized as the boundary of space, located at 100 kilometers?
31,953
cqadupstack-physics
22224
How to find replacement function of a mass?
![enter image description here](http://i.stack.imgur.com/8OAWc.png) I wonder how I can find the replacement function of the center of the blue mass? The center of mass of the blue mass is $(0,0)$ and the blue mass is homogeneous. The masses do not move at t=0 in the system (Their initial speeds are zero). There is no f...
Given a homogeneous blue mass with a center of mass at \((0,0)\) and a red point mass initially positioned at an angle \(\alpha_0\) with respect to the y-axis, derive the equations of motion for the red mass and the blue mass in the absence of friction. Additionally, find the expressions for \(X_b(t)\) and \(Y_b(t)\), ...
12,708
cqadupstack-physics
52069
Can I see the light from 10 million km away?
If **light** is switched ON, only for a second, and the distance between the observer and the light source is 10 million kilometers, can I still see the light spark? For example, let's assume that the source is the Sun and the observer is a human eye.
If a light source emits a pulse of light for 1 second and is located 10 million kilometers away, how long will it take for the light to reach an observer on Earth, and would the observer see the light?
16,739
cqadupstack-physics
56173
friction on atomic scale
I am getting into friction on an atomic scale. For instance, take two rigid layers of atoms of the kind A that are placed on top of each other, just like putting two boards of wood on top of each other. Then place some atoms or molecules of the kind B between those two rigid layers, i.e. put some pebbles between the tw...
What are the factors that influence the coefficient of friction between two atomic layers of material A when interspersed with atoms or molecules of material B, and how could these factors be quantified in a computational model?
32,871
cqadupstack-physics
21987
What do the dimensions of circulation mean, and how is circulation related to action?
The dimensions of circulation $\int_C \vec{v}\cdot d\vec{r}$ seem strange, but if you include (even a constant) density $\rho$, then $\int_C \rho\vec{v}\cdot d\vec{r}$ has dimensions the same as action/volume. Is there any significance to that? Is there any heuristic way to think about circulation which helps understan...
What are the dimensions of the circulation integral $\int_C \vec{v}\cdot d\vec{r}$, and how do they compare to the dimensions of the integral $\int_C \rho\vec{v}\cdot d\vec{r}$ when considering the density $\rho$? Additionally, what insight can you provide into the significance of these dimensions in the context of flu...
22,300
cqadupstack-physics
41436
What is nonlocal resistance?
We are first taught to calculate local resistance, where current and voltage are on the same part of the material. But many experiments measure nonlocal resistance, where current and voltage are measured on different parts of the material. 1. What is nonlocal resistance? 2. What is the advantage of measuring nonloc...
What is the formula for calculating nonlocal resistance in a conductor, and how does it differ from the formula for local resistance?
15,775
cqadupstack-physics
103720
EPR paradox: instantaneous vs very fast?
An EPR quantum experiment can be explained by instantaneous collapse of the wave function regardless of the distance separating a pair of entangled particles. But do we have the certainty that the process is really instantaneous? If not, what is the current experimental limit on how fast is the process?
What is the experimental limit on the maximum speed of the wave function collapse in an EPR quantum experiment, and how does this limit relate to the concept of instantaneous effects in quantum entanglement?
35,685
cqadupstack-physics
97824
How to determine the order of indications of a clock?
Given the description of a clock $\mathcal A$, as * (1) a set $A$ of all (more than 2) distinct indications of this clock, **in no particular order** (where the individual indications contained in set $A$ are denoted below as "$A_J$", "$A_Q$", "$A_V$" etc.), together with * (2) a function $t_{\mathcal A} : A \rig...
Given a set of three distinct time indications from a clock, represented as \( A_J \), \( A_Q \), and \( A_V \), where the function \( t_{\mathcal A} \) assigns real numbers to these indications, how can you determine the chronological order of these indications based solely on their respective time values without assu...
2,102
cqadupstack-physics
27602
Krauss operators for random unitary
Suppose I have a density matrix $\rho$ and I act on it with a unitary matrix that is chosen randomly, and with even probability, from $S = \\{ H_1, H_2 \ldots H_N \\}$. I want to write the operation on the density matrix in Krauss form: $ \rho^{\prime} = \sum_i O_i \rho O^{\dagger}_i $ Since the operator is chosen even...
If I randomly choose a unitary matrix $H_i$ from the set $S = \{ H_1, H_2, \ldots, H_N \}$ with uniform probability, how can I express the Krauss operators $O_i$ in terms of the chosen $H_i$ when transforming the density matrix $\rho$ using the relation $\rho' = \sum_i O_i \rho O_i^\dagger$? What specific form or repre...
38,241
cqadupstack-physics
3906
Physics of a skateboard ollie
Does anyone have a good explanation of the physics and vectors of force involved in the skateboarding trick the ollie (where the skater jumps and causes the skateboard to rise off the ground with him)?
What are the key physics principles and vector forces involved in performing an ollie on a skateboard, and how would you calculate the necessary vertical force a skater needs to apply to successfully execute the trick, given a skateboard mass of 2 kg and a skater mass of 70 kg?
10,976
cqadupstack-physics
94172
What force creates ions out of neutral atoms?
Consider the reaction between Na and Cl to form NaCl. Na loses an electron and "gives" it to Cl because this makes both atoms more stable. But what forces "pulls" the electron from Na to Cl? Both atoms are electrically neutral at the beginning, so the electron that is going to be transferred isn't acted on by electrost...
What specific interactions or forces, other than electrostatic attraction, contribute to the transfer of an electron from sodium (Na) to chlorine (Cl) in the formation of sodium chloride (NaCl), considering that both atoms are initially neutral?
17,028
cqadupstack-physics
114354
Which Force would help find the mass?
A and B are connected to a rope. A constant upward force 86.0N is applied to box A. Starting from rest, box B descends 12.1m in 4.70s . The tension in the rope connecting the two boxes is 32.0N. What is the mass of B? What is the mass of A? ![enter image description here](http://i.stack.imgur.com/g90hu.jpg) * * * ## My...
Given that box B descends 12.1 m in 4.70 s while a constant upward force of 86.0 N is applied to box A, and the tension in the rope connecting the two boxes is 32.0 N, calculate the mass of box B and the mass of box A.
567
cqadupstack-physics
131947
Possible Error in deriving conformal generator
My professor gave me the following derivation for the full generator of the Lorentz transformations. The starting point is to consider a subgroup of the conformal group that leaves the origin fixed (as done so in Di Francesco, for example). Denote by $J_{\mu \nu}$ the full generator and so $J_{\mu \nu}\Phi(0) = S_{\mu ...
In the context of the commutation relation derived in the passage, why does the term involving the commutator $[J_{\mu \nu}, x^{\sigma}]$ vanish? What are the physical interpretations or conditions that lead to this result?
14,168
cqadupstack-physics
86369
How do you derive the Lagrangian for the Standard Model?
Is there a way to derive the Lagrangian for the Standard Model just like one would for Einstein's field equations for instance? Also, how do you derive the Laganrigans for QCD and QED? Is it possible to do so from first principles? In addition, what are these Lagrangians for these quantum field theories describing? An ...
What are the Lagrangians for Quantum Electrodynamics (QED) and Quantum Chromodynamics (QCD), and how can they be derived from first principles? Please explain their physical significance and what quantities they describe.
21,870
cqadupstack-physics
99954
Generator of local symmetries
Let us only consider classical field theories in this discussion. Noether's theorem states that for every global symmetry, there exists a conserved current and a conserved charge. The charge is the generator of the symmetry transformation. Concretely, if $\phi \to \phi + \varepsilon^a\delta_a \phi$ is a symmetry of the...
Is there a formalism or framework in classical field theories that allows us to construct a quantity \( Q_{\varepsilon} \) such that \( \{ Q_{\varepsilon}, \phi \} = [ \varepsilon^a \delta_a] \phi \) for gauge transformations, even though \( Q_{\varepsilon} \) need not be conserved? If so, can you provide an example of...
32,144
cqadupstack-physics
12030
Equation of motion for explicit time dependent potential
What is the equation of motion for a single scalar field, which has a Lagrangian density in which the potential explicitly depends on time? For example: $$U(\phi,t)=\frac{1}{2}\phi^2 - \frac{1}{3} e^{t/T}\phi^3 + \frac{1}{8}\phi^4$$ where $T$ is a constant.
What is the equation of motion for a scalar field with the given time-dependent Lagrangian density \( \mathcal{L}(\phi, \partial_\mu \phi) = \frac{1}{2} \partial_\mu \phi \partial^\mu \phi - U(\phi, t) \), where the potential is defined as \( U(\phi,t)=\frac{1}{2}\phi^2 - \frac{1}{3} e^{t/T}\phi^3 + \frac{1}{8}\phi^4 \...
4,433
cqadupstack-physics
123
How does one measure the mass of a galaxy? And other such large quantities
Trained as a pure mathematician, I see claims about the mass of a galaxy and other such huge measurements that are arrived at experimentally, and I just have to scratch my head. I know this is a bit of a vague question--but does anyone have a good resource for something like "measurement in astrophysics" or an introduc...
What are the primary methods used to measure the mass of a galaxy, and how have these techniques evolved over time in astrophysics?
22,008
cqadupstack-physics
20026
How Is It Possible To Measure Extreme Temperatures? (>2M Deg)
Linked Article: Fusion: X-ray laser zaps solid to 2 million degrees > The quest to create nuclear fusion may have come a step closer when > scientists heated solid matter to two million degrees with the world's most > powerful X-ray laser, a study reported on Wednesday. I don't see how is it possible that these scienti...
What methods or instruments can scientists use to accurately measure temperatures as high as two million degrees Celsius without the measuring device itself melting or being damaged?
10,456
cqadupstack-physics
50122
If there was no Earth, what would be the acceleration of gravity from here from the Sun?
Suppose there were no Earth to pull us back and we're hanging in the solar system. Assuming no other force of gravity from other bodies, what would be the $g$ from the Sun?
If we were in space, far away from Earth and other gravitational influences, what would be the acceleration due to gravity experienced by an object at a distance of 1 astronomical unit (AU) from the Sun? Calculate the value of \( g \) at this distance.
35,028
cqadupstack-physics
31211
Rotation of parabola
I'm designing a parabolic solar concentrator and am doing ray-tracing on Matlab from scratch. I'm beginning to look into compound concentrators and would need to have an equation for a parabola rotated by x degrees centered at a specific (non origin) point. The equation I am using for my parabolas is $ a*(x-X)^2 - Y $....
What is the parametric equation for a parabola rotated by an angle \( \theta \) around a point \((X,Y)\)?
14,776
cqadupstack-physics
74916
Time diffeomorphisms breaking in inflation
I am currently working on the topic of inflation. It seems that at the stage of inflation, the universe can be described as a de Sitter space. In such a space, all spacetime diffeomorphisms are preserved. (That is something I don't really understand but I keep reading that so I admit it for now.) Now, I read that, in o...
What is the relationship between the Goldstone boson associated with the spontaneous breaking of time translational symmetry during inflation and the fluctuations in the inflaton field represented by $\delta \phi$?
36,132
cqadupstack-physics
43622
How does the weight force distribute in roughly kite like kinematic to determine torques
I have a kinematic model like the simplified following image. Assume that all points are fixed. I'm interested in how the force $\vec{m}$ distributes across $a_2$ and $b_2$ up to $a_1$ and $b_1$. Finally I'm interested in the torques that result in $A_1$ and $B_1$. ![enter image description here](http://i.stack.imgur.c...
Given the kinematic model described, if a force \( \vec{m} \) of magnitude 100 N is applied at point \( A_2 \), determine the distribution of this force across points \( a_1 \) and \( b_1 \). Additionally, calculate the resulting torques about points \( A_1 \) and \( B_1 \) if the distances \( \overline{A_1A_2} = 1.5 \...
37,129
cqadupstack-physics
132711
Inductor Charging and Discharging
Why does the inductor discharges in the same path ( same direction of current ) as that of its charging unlike a capacitor which discharges in the direction opposite to its charging(current direction is reversed in discharging).? What could be its physical reason (for Lenz's Law)
What is the mathematical expression for the induced electromotive force (emf) in an inductor when the current through it is changing, and how does this relate to Lenz's Law in terms of the direction of the induced current?
22,940
cqadupstack-physics
113539
What is the phenomenological logic behind Fermi liquid theory
I am a super beginner when it comes to Solid State Physics and when wanting to learn more on the subject, I end up reading on Landau's Fermi liquid theory that supposedly justifies the quasi-free electron model I was taught at the undergraduate level. I have spanned now few .pdf lectures that I could find online and fi...
In Landau's Fermi liquid theory, how are excitations defined in relation to the equilibrium state of a Fermi gas, and how do these excitations relate to the statistical behavior of electrons in metals compared to traditional methods like cluster expansions used in soft matter physics?
22,886
cqadupstack-physics
125932
Special relativity and electromagnets
This Veritasium video explains how electromagnets can be explained by special relativity, and how the magnetic field surrounding a current-carrying wire can also be viewed as an electric field, if your frame of reference is moving with respect to the wire. The example they use is a positively-charged cat, moving along ...
In the rest frame of a moving positively-charged cat near a current-carrying wire, how does the charge density of the wire change as perceived by the cat, and what is the resulting electromagnetic force experienced by the cat? Additionally, how does this contrast with the perspective of an observer at rest relative to ...
34,753
cqadupstack-physics
131708
Is there an absolute center of mass exist in the universe?
By the "absolute center of mass" I mean the center of all the matter that exists in a given moment. My friend asserted that today and it intrigued us very much but since we only have a CS degree and not very well versed in modern physics we couldn't be sure about that claim. It is based on the observation that; the tot...
What is the principle of conservation of momentum, and how does it apply to the movement of an astronaut in space, specifically regarding the center of mass of the system?
6,536
cqadupstack-physics
126106
Creating a 3-D object from 2-D objects
I'm reading a book, 'Warped Passges' by Lisa Randall. In it she mentions how we can envision higher dimensions by explaning how higher dimension ojects can be created from lower dimension objects. So she says > "This book is three-dimensional. However, its pages have only two > dimensions. The union of the two-dimensio...
Is it possible to create a true three-dimensional object from two-dimensional pages that have zero thickness, and if so, how does this relate to the concept of dimensions in physics?
31,047
cqadupstack-physics
26588
Advice sought on choosing a camera for a Meade LX10
I have a Meade LX10 and have never done any astrophotography (except with some computerised SBIG ST9s on my university's LX200s). I would like to get started at home, but could do with some advice on which low budget camera would be suitable, obtainable in the UK and preferably under £100. Do I need a DSLR? I've seen p...
What are some recommended low-budget cameras under £100 suitable for astrophotography that can capture targets like stars, nebulae, and galaxies, and how can they be attached to a Meade LX10 telescope?
35,583
cqadupstack-physics