Prompt stringlengths 96 2.17k | Code stringlengths 27 249k | 3d_glb stringlengths 24 24 |
|---|---|---|
Create a Vertical Paint Rack designed to hold paint bottles in a grid. The main body is a rectangular plate composed of a 6-column by 4-row grid of bottle slots. Each individual slot measures 34mm in width and 38mm in height.
Arrange these slots with a left padding of 2mm and a right padding of 2mm. Add a top padding... | RACK_SIZE_X=6;
RACK_SIZE_Y=4;
LOWER_NOTCH=true;
PADDING_TOP=4;
PADDING_LEFT=2;
PADDING_RIGHT=2;
PADDING_BOTTOM=0;
NOTCH_STL="hanger-notch-fixed.stl";
SLOT_STL="base-slot-v2.stl";
SLOT_SIZE_X=34;
SLOT_SIZE_Y=38;
module slot(rack_x, rack_y) {
translate([
(rack_x * SLOT_SIZE_X) + (SLOT_SIZE_X / 2) + PADDING_L... | glb/cad_11c8022c1311.glb |
Create a fan knob by starting with a main cylinder that has a diameter of 40mm and a height of 15mm. Around the top outer edge of this cylinder, place 12 spheres, each with a diameter of 13mm. These spheres should be evenly spaced every 30 degrees around the perimeter, with their centers positioned 17mm from the centra... | diameter = 40;
height = 15;
shaft_diameter = 6;
shaft_relief = 6 - 4.25;
shaft_height = 7.25;
grap_number = 12;
tolerance = 0.2;
module knob()
{
cylinder(d=diameter, h=height, $fn=80);
for(a = [0:360/grap_number:360])
{
rotate([0, 0, a])
{
translate([diameter/2-3, 0, height-3... | glb/cad_d6d1afe902f3.glb |
Create a utility knife blade with a thickness of 0.6mm. The main body is a flat plate defined by a trapezoidal profile: the bottom edge is 30mm wide, and the top edge is 60mm wide, with a height of 18.6mm.
Within this profile, remove two symmetrical vertical slots. Each slot consists of a 3.5mm wide rectangle with a ... | long_side = 60;
short_side = 30;
height = 18.6;
gap_diameter = 3.5;
gap_depth = 4.5;
gap_distance = 3;
thickness = 0.6;
edge = 2;
module utility_knife_blade_two_dimensions()
{
difference()
{
polygon([[-long_side/2, height], [- short_side/2, 0], [short_side/2, 0], [long_side/2, height]]);
for... | glb/cad_e4aab4006215.glb |
Create a shelf foot sleeve with a total length of 73mm and a total width of 17mm. The main body is a solid rectangular block with rounded corners of 6mm radius. The walls and the bottom base both have a thickness of 1.5mm.
Hollow out the center of the block to create a sleeve with an internal length of 70mm and an in... | height = 10;
gap = 0.5;
thickness = 1.5;
height_spacer = 0;
screw = true;
screw_hole_diameter = 2.5;
screw_head_diameter = 5;
label = true;
version_number = "v1.1";
font_type = "";
text_size = 6;
text_depth = 0.28;
length = 70;
width = 14;
corner_diameter = 6;
$fa = 1;
$fs = 0.01;
module shape(length, w... | glb/cad_bb9e007fdaf3.glb |
Create a bottle dryer stand consisting of a central tower and a wide base plate. Start by constructing the base plate as a cylinder with a diameter of 80mm and a height of 10mm. Remove a cylindrical section from the center of this plate, starting 2mm from the bottom, with a diameter of 66mm (the sum of the tower bottom... | height_of_tower = 40;
diameter_of_tower_top = 48;
diameter_of_tower_bottom = 56;
height_of_plate = 10;
diameter_of_plate = 80;
rill_width = 10;
height_of_floor = 2;
show_the_tower = true;
show_the_plate = true;
assert(diameter_of_tower_top < diameter_of_tower_bottom);
assert(diameter_of_tower_bottom + rill_width... | glb/cad_3488ec8ad8c8.glb |
Create a rectangular open-top box with outer dimensions of 119mm in length, 66mm in width, and 30mm in height. The box should have a uniform wall thickness of 2mm on all four sides. To achieve the hollow interior, remove a central rectangular volume starting 2mm from each outer side wall and 1mm from the bottom surface... | $fn=100;
difference(){
cube([119,66,30]);
translate([2,2,1])
cube([115,62,62]);
} | glb/cad_fd8523f7682b.glb |
Create a rectangular tray with a hollow center. Start by forming a solid outer block that is 71mm wide, 66mm deep, and 26mm tall. From this block, remove a central rectangular volume to create the interior cavity, leaving walls that are 2mm thick. This cavity should be 67mm wide and 62mm deep, starting from a height of... | $fn=100;
difference(){
translate([3,3,0])
cube([65,60,16]);
translate([5,5,-1])
cube([61,56,23]);
}
translate([0,0,16])
difference(){
cube([71,66,10]);
translate([2,2,2])
cube([67,62,62]);
rotate([-15,0,0])
translate([-2,56,18])
cube([80,2,20]);
} | glb/cad_0985bf416d7d.glb |
Create a rectangular box with outer dimensions of 99mm in width, 66mm in depth, and 68mm in height. Hollow out the interior by removing a smaller rectangular block measuring 95mm by 62mm, positioned 2mm from the front and side walls and starting 1mm from the base. Finally, remove a semi-cylindrical volume from the top ... | $fn=100;
difference(){
cube([99,66,68]);
translate([2,2,1])
cube([95,62,100]);
translate([48.5,200,68])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_9e2364ff6019.glb |
Create a Cubitos Insert organizer by starting with a solid rectangular block measuring 219mm in length, 73mm in width, and 16mm in height.
Carve out the interior of the block by removing two rectangular volumes. First, remove a block measuring 115mm by 40mm by 20mm, positioned 2mm from the front and side edges and 1m... | $fn=100;
difference(){
cube([219,73,16]);
translate([2,2,1])
cube([115,40,20]);
translate([58.5,40,18])
rotate([90,0,0])
cylinder(h=100, r=17, center=false);
translate([2,44,1])
cube([115,27,20]);
translate([119,2,1])
cube([98,69,20]);
} | glb/cad_d1a2f4f7aa48.glb |
Create a Cubitos Insert organizer by starting with a solid rectangular block measuring 219mm in width, 109.5mm in depth, and 37mm in height.
From this block, carve out two large rectangular voids to create the main compartments. Position the first void at coordinates (2, 2, 2) and the second at (111, 2, 2), both meas... | $fn=50;
difference(){
cube([219,109.5,37]);
translate([2,2,2])
cube([106,105.5,45]);
translate([111,2,2])
cube([106,105.5,45]);
translate([55,200,50])
rotate([90,0,0])
cylinder(h=400, r=45, center=false);
translate([164,200,50])
rotate([90,0,0])
cylinder(h=400, r=45, center=false);
translate([2,55,50])
rotate([0,... | glb/cad_2b61f1a996f6.glb |
Create a rectangular open-top box with external dimensions of 39.6mm in width, 66mm in length, and 16.5mm in height. To form the interior cavity, remove a smaller rectangular block from the center, leaving a wall thickness of 1mm on all four sides and a base thickness of 1mm at the bottom. The resulting internal void s... | $fn=100;
difference(){
cube([39.6,66,16.5]);
translate([1,1,1])
cube([37.6,64,62]);
} | glb/cad_6b609c529e32.glb |
Create a Cubitos Insert organizer by starting with a solid rectangular block measuring 99mm in width, 66mm in depth, and 68mm in height.
From this block, remove eight long rectangular slots to create a series of channels. Each slot must be 95mm wide, 6.75mm high, and 100mm deep, positioned starting at coordinates (2,... | $fn=100;
difference(){
cube([99,66,68]);
translate([2,1.75,1])
for(i = [0:7]){
translate([0,(i*8),0])
cube([95,6.75,100]);
}
translate([48.5,200,68])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_a1d79890647f.glb |
Create a rectangular organizer block with overall dimensions of 219mm in length, 73mm in width, and 16mm in height. Within this block, carve out three identical open-top compartments. Each compartment should be a rounded-corner rectangular void measuring 49mm by 49mm in base dimensions and 23mm in depth.
Position the... | $fn=100;
difference(){
cube([219,73,16]);
translate([12.5,0,0])
for (i = [0:2]){
translate([i*72.5,12,11])
minkowski(){
cube([49,49,23]);
sphere(r=10);
}
}
} | glb/cad_588b55c9d86c.glb |
Create a rectangular organizer block with overall dimensions of 33mm wide, 286mm long, and 62mm high. Hollow out the interior to create three distinct storage compartments. The first two compartments are identical rectangular wells, each measuring 30mm wide, 93.5mm long, and 70mm deep, positioned with a 1.5mm wall thic... | $fn=50;
difference(){
cube([33,286,62]);
translate([1.5,1.5,8])
cube([30,93.5,70]);
translate([1.5,96.5,8])
cube([30,93.5,70]);
translate([1.5,191.5,8])
cube([14,93,70]);
translate([17,191.5,8])
cube([14,93,70]);
translate([-10,48.5,62])
rotate([0,90,0])
cylinder(h=400, r=25, center=false);
translate([-10,143,62... | glb/cad_870cf996d61a.glb |
Create a rectangular organizer tray for game components. Start with a solid outer block measuring 71mm in width, 98mm in length, and 18mm in height.
Carve out a central rectangular recess to create the main storage area; this cavity should be 68mm wide and 95mm long, positioned 1.5mm from the side and front walls, an... | $fn=100;
difference(){
cube([71,98,18]);
translate([1.5,1.5,1])
cube([68,95,23]);
translate([0,49,-1])
rotate([0,0,90])
cylinder(h=400, r=10, center=false);
translate([71,49,-1])
rotate([0,0,90])
cylinder(h=400, r=10, center=false);
} | glb/cad_11ddab783aaf.glb |
Create a rectangular organizer tray for a board game insert with overall exterior dimensions of 254mm in length, 56mm in width, and 35mm in height. The tray is constructed by removing two large rectangular volumes from the interior to create two side-by-side open compartments. Each interior cutout measures 124.75mm in ... | $fn=50;
difference(){
cube([254,56,35]);
translate([1.5,1.5,1])
cube([124.75,53,62]);
translate([127.75,1.5,1])
cube([124.75,53,62]);
} | glb/cad_8548a7d1c23e.glb |
Create a rectangular organizer tray with outer dimensions of 71mm width, 98mm length, and 18mm height. Inside this volume, carve out two distinct recessed compartments. First, create a large card recess measuring 68mm by 95mm with a depth of 23mm, positioned 1.5mm from the left and front edges. Second, create a manta r... | $fn=100;
difference(){
cube([71,98,18]);
translate([11.5,4,1])
cube([48,90,23]);
translate([1.5,1.5,8])
cube([68,95,23]);
translate([0,49,12])
sphere(10);
translate([-1,39,12])
cube([5,20,20]);
translate([71,49,12])
sphere(10);
translate([68,39,12])
cube([5,20,20]);
} | glb/cad_0484f2d04881.glb |
Create a rectangular organizer box for game components with overall exterior dimensions of 56mm in width, 33mm in depth, and 55mm in height. The box should have a wall thickness of 1.5mm on the sides and a base thickness of 3mm. Hollow out the interior to create a main storage cavity measuring 53mm by 30mm. From the to... | $fn=50;
difference(){
cube([56,33,55]);
translate([1.5,1.5,3])
cube([53,30,60]);
translate([28,40,55])
rotate([90,0,0])
cylinder(h=50, r=18, center=false);
} | glb/cad_d363b051fb8a.glb |
Create a rectangular block measuring 33mm wide, 286mm long, and 62mm high. From this block, remove six rectangular voids to create three separate storage compartments. Each void must measure 14mm by 93mm with a depth of 70mm, though they are limited by the block's overall height. Position the first two voids side-by-si... | $fn=50;
difference(){
cube([33,286,62]);
translate([1.5,1.5,8])
cube([14,93,70]);
translate([17,1.5,8])
cube([14,93,70]);
translate([1.5,96.5,8])
cube([14,93,70]);
translate([17,96.5,8])
cube([14,93,70]);
translate([1.5,191.5,8])
cube([14,93,70]);
translate([17,191.5,8])
cube([14,93,70]);
translate([-10,48.5,62... | glb/cad_62c1bda037da.glb |
Create a rectangular organizer tray for a board game insert with overall exterior dimensions of 254mm in length, 56mm in width, and 35mm in height. The tray is constructed by removing three identical rectangular volumes from the top to create three open compartments. Each compartment must measure 82.5mm in length, 53mm... | $fn=50;
difference(){
cube([254,56,35]);
translate([1.625,1.5,1])
cube([82.5,53,62]);
translate([85.75,1.5,1])
cube([82.5,53,62]);
translate([169.875,1.5,1])
cube([82.5,53,62]);
} | glb/cad_b2762253081a.glb |
Create a rectangular storage box for a game insert. Start with a solid outer cube measuring 98mm in width, 92.5mm in depth, and 61mm in height. From this solid volume, remove a smaller rectangular block to create a hollow interior cavity. This interior cutout should start 1.5mm from the front and 1.5mm from the side, w... | $fn=100;
difference(){
cube([98,92.5,61]);
translate([1.5,1.5,1])
cube([95,89.5,100]);
} | glb/cad_83feca172bfc.glb |
Create a rectangular organizer block with overall dimensions of 98mm in width, 159mm in length, and 61mm in height. From this solid block, remove three rectangular card slots, each measuring 95mm by 51mm with a depth of 100mm. Position the first slot starting at coordinates (1.5, 1.5, 1), the second at (1.5, 54, 1), an... | $fn=100;
difference(){
cube([98,159,61]);
translate([1.5,1.5,1])
cube([95,51,100]);
translate([1.5,54,1])
cube([95,51,100]);
translate([1.5,106.5,1])
cube([95,51,100]);
translate([49.5,200,62])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_59199eb1f2ba.glb |
Create a Steampunk Rally Fusion Insert organizer by starting with a solid cube measuring 140mm in width, 140mm in depth, and 30mm in height. Hollow out the center of this cube by removing a smaller cube measuring 137mm by 137mm with a height of 50mm, positioned 1.5mm from the front and side edges and raised 1mm from th... | $fn=50;
difference(){
cube([140,140,30]);
translate([1.5,1.5,1])
cube([137,137,50]);
translate([70,200,51])
rotate([90,0,0])
cylinder(h=400, r=50, center=false);
translate([-1,70,51])
rotate([0,90,0])
cylinder(h=400, r=50, center=false);
} | glb/cad_ee1f566bf9f3.glb |
Create a Steampunk Rally Fusion organizer insert by starting with a solid rectangular block measuring 98mm in width, 127.5mm in depth, and 61mm in height.
Carve out four identical rectangular card slots from the top face. Each slot must measure 95mm in width and 30mm in depth, with a depth of 100mm. Position the firs... | $fn=100;
difference(){
cube([98,127.5,61]);
translate([1.5,1.5,1])
cube([95,30,100]);
translate([1.5,33,1])
cube([95,30,100]);
translate([1.5,64.5,1])
cube([95,30,100]);
translate([1.5,96,1])
cube([95,30,100]);
translate([49.5,200,62])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_d20fe26fd841.glb |
Create a rectangular organizer block with overall dimensions of 98mm in width, 129mm in length, and 61mm in height. From this solid base, remove five rectangular sections to create open storage slots. The first slot is 95mm wide, 51mm long, and 100mm deep, positioned 1.5mm from the side and 1.5mm from the front edge, s... | $fn=100;
difference(){
cube([98,129,61]);
translate([1.5,1.5,1])
cube([95,51,100]);
translate([1.5,54,1])
cube([95,42,100]);
translate([1.5,97.5,1])
cube([95,13,100]);
translate([1.5,112,1])
cube([95,7,100]);
translate([1.5,120.5,1])
cube([95,7,100]);
translate([49.5,200,62])
rotate([90,0,0])
cylinder(h=400, r=... | glb/cad_ca282dd7b8b9.glb |
Create a Steampunk Rally Fusion Insert organizer by starting with a solid rectangular base measuring 168mm in width, 190mm in depth, and 13mm in height. Hollow out the center of this base by removing a rectangular block measuring 165mm by 187mm, starting from a height of 7mm and extending upwards, which leaves a 1.5mm ... | $fn=100;
difference(){
cube([168,190,13]);
translate([1.5,1.5,7])
cube([165,187,30]);
for(i = [0:4]){
for (j = [0:3]){
translate([(i*30)+12,(j*48)+3,5])
cube([23,40,30]);
translate([(i*30)+11,(j*48)+3,1])
cube([25,9,30]);
}
}
} | glb/cad_64466e624d31.glb |
Create a rectangular organizer tray for game components with overall outer dimensions of 50mm in width, 140mm in length, and 14mm in height. Hollow out the interior to create two separate storage compartments. The first compartment should be a rectangular void measuring 47mm by 67.5mm with a depth of 30mm, positioned 1... | $fn=100;
difference(){
cube([50,140,14]);
translate([1.5,1.5,1])
cube([47,67.5,30]);
translate([1.5,71,1])
cube([47,67.5,30]);
} | glb/cad_028f9c72bea6.glb |
Create a rectangular tray for a game organizer with overall outer dimensions of 190mm in length, 120mm in width, and 11mm in height. Hollow out the center of the tray to create a storage compartment that is 187mm long, 117mm wide, and 50mm deep, leaving a wall thickness of 1.5mm on all sides. The floor of this interior... | difference(){
cube([190,120,11]);
translate([1.5,1.5,2])
cube([187,117,50]);
translate([95,0,-1])
rotate([0,0,0])
cylinder(h=400, d=25, center=false);
translate([95,120,-1])
rotate([0,0,0])
cylinder(h=400, d=25, center=false);
} | glb/cad_58a3f5babd40.glb |
Create a Steampunk Rally Fusion organizer insert by starting with a solid rectangular block measuring 190mm in width, 148mm in depth, and 30mm in height.
Carve out a large primary compartment and three smaller secondary compartments, all with rounded interior corners. The primary compartment is positioned at the fron... | $fn=50;
difference(){
cube([190,148,30]);
translate([12.5,12.5,11])
minkowski(){
cube([39,123,23]);
sphere(r=10);
}
for (i = [0:2]){
translate([74,(i*48.5)+12.5,11])
minkowski(){
cube([103,26,23]);
sphere(r=10);
}
}
} | glb/cad_ab3f1a668e99.glb |
Create a Steampunk Rally Fusion organizer insert by starting with a solid rectangular block measuring 144mm in length, 98mm in width, and 16mm in height. From the top surface of this block, remove a series of cylindrical voids to create storage wells. The first void is a cylinder with a diameter of 78mm, centered at co... | $fn=100;
difference(){
cube([144,98,16]);
translate([41.5,49,1])
rotate([0,0,0])
cylinder(h=400, d=78, center=false);
for(i = [1:4]){
translate([(i*29.1)+41.5,49,1])
rotate([0,0,0])
cylinder(h=400, d=78, center=false);
}
} | glb/cad_b4f5da235ce8.glb |
Create a Steampunk Rally Fusion organizer insert by starting with a solid rectangular block measuring 190mm in width, 144mm in depth, and 21mm in height.
Carve out two large rectangular cavities to create the main storage bins. Position the first cavity 2mm from the left and front edges, with dimensions of 92mm wide,... | $fn=100;
difference(){
cube([190,144,21]);
translate([2,2,1.5])
cube([92,140,45]);
translate([96,2,1.5])
cube([92,140,45]);
translate([48,200,50])
rotate([90,0,0])
cylinder(h=400, r=45, center=false);
translate([142,200,50])
rotate([90,0,0])
cylinder(h=400, r=45, center=false);
translate([-1,72,50])
rotate([0,90,... | glb/cad_7b117c81e4ae.glb |
Create a rectangular block with dimensions 98mm in width, 68mm in depth, and 61mm in height. From this main volume, remove four rectangular slots to create card trays. Each slot should be 95mm wide and 1mm above the base. Position the first slot at x=1.5, y=1.5 with a depth of 25mm. Position the second slot at x=1.5, y... | $fn=100;
difference(){
cube([98,68,61]);
translate([1.5,1.5,1])
cube([95,25,100]);
translate([1.5,28,1])
cube([95,13,100]);
translate([1.5,42.5,1])
cube([95,7,100]);
translate([1.5,51,1])
cube([95,7,100]);
translate([1.5,59.5,1])
cube([95,7,100]);
translate([49.5,200,62])
rotate([90,0,0])
cylinder(h=400, r=27.5... | glb/cad_42d7610ae5b3.glb |
Create a rectangular organizer tray with overall dimensions of 190mm in length, 120mm in width, and 15mm in height. Within this base, carve out five distinct compartments with rounded corners, each featuring a corner radius of 10mm.
Position the first square compartment at coordinates (11.5, 11.5, 11), with internal ... | $fn=100;
difference(){
cube([190,120,15]);
translate([11.5,11.5,11])
minkowski(){
cube([50,50,23]);
sphere(r=10);
}
translate([11.5,84,11])
minkowski(){
cube([50,24,23]);
sphere(r=10);
}
translate([84,11.5,11])
minkowski(){
cube([50,50,23]);
sphere(r=10);
}
translate([84,84,11])
minkowski(){
cube([50,24,23]);
sphe... | glb/cad_cca1eb7ace6c.glb |
Create a Steampunk Rally Fusion organizer insert by starting with a solid rectangular block measuring 50mm wide, 140mm long, and 16mm high. From this base, carve out several specific voids to create storage compartments.
First, center a circular hole with a 31mm diameter and a depth of 30mm (extending through the bott... | $fn=100;
difference(){
cube([50,140,16]);
translate([25,16,1])
cylinder(d=31,h=30);
translate([25,0,1])
cylinder(r=8,h=30);
translate([12,44,11])
minkowski(){
cube([26,27,23]);
sphere(r=10);
}
translate([12,94,16])
minkowski(){
cube([26,7,23]);
sphere(r=10);
}
translate([12,124,11])
minkowski(){
cube([26,4,23]);
... | glb/cad_a4fa6ef4c76e.glb |
Create a rectangular tray for board game components with overall dimensions of 116.5mm in length, 62mm in width, and 18mm in height. The outer walls should have rounded corners with a radius of 3mm.
Hollow out the interior to create three separate compartments. To do this, remove a large central volume from the top, ... | $fn=100;
difference(){
roundedCube(116.5,62,18);
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([0,0,0]){
translate([12,1.5,1])
cube([25,59,62]);
translate([38.5,1.5,1])
cube([35,59,62]);
transla... | glb/cad_9007a6527394.glb |
Create a rectangular tray for board game components with overall outer dimensions of 116.5mm in length, 62mm in width, and 18mm in height.
Carve out the interior to create three separate compartments. First, remove two vertical cylinders with a diameter of 21.5mm, centered at the left and right edges of the tray alon... | $fn=100;
difference(){
cube([116.5,62,18]);
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([0,0,0]){
translate([12,1.5,1])
cube([25,59,62]);
translate([38.5,1.5,1])
cube([35,59,62]);
translate([7... | glb/cad_0ddbc8289ce4.glb |
Create a rectangular tray for board game components. Start with a solid rectangular block measuring 116.5mm in length, 62mm in width, and 10mm in height.
From this block, remove a large central rectangular volume to create a hollow well. This interior cutout should start 12mm from the front edge, 1.5mm from the side ... | $fn=100;
difference(){
cube([116.5,62,10]);
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([0,0,0]){
translate([12,1.5,1])
cube([92.5,59,62]);
}
} | glb/cad_b8424a08f090.glb |
Create a rectangular organizer box for game components with overall exterior dimensions of 110mm in length, 50mm in width, and 73mm in height. Hollow out the interior to create two distinct card slots. The first slot is a rectangular void measuring 95mm by 20mm, positioned 7.5mm from the front wall and 1.5mm from the s... | $fn=100;
difference(){
cube([110,50,73]);
translate([7.5,1.5,5])
cube([95,20,69]);
translate([7.5,23,5])
cube([95,25.5,69]);
translate([55,200,73])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_cb16f8d08a6c.glb |
Create a rectangular tray for board game organization with overall outer dimensions of 116.5mm in length, 62mm in width, and 10mm in height. The outer walls should have rounded corners with a radius of 3mm.
Carve out a central rectangular void to create the main storage compartment, leaving a wall thickness of 1.5mm ... | $fn=100;
difference(){
roundedCube(116.5,62,10);
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([0,0,0]){
translate([12,1.5,1])
cube([92.5,59,62]);
}
}
module roundedCube(x,y,z)
{
r=3;
translate(... | glb/cad_35214dbe4341.glb |
Create a rectangular tray for board game components with overall exterior dimensions of 116.5mm in length, 62mm in width, and 15mm in height. Hollow out the interior to create two main compartments by removing material from the top.
First, create two vertical cylindrical holes with a diameter of 21.5mm, centered at e... | $fn=100;
difference(){
cube([116.5,62,15]);
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([6,0,0]){
translate([12,1.5,2])
cube([41,59,62]);
translate([54.5,1.5,2])
cube([37,59,62]);
}
translate(... | glb/cad_86325e546e0f.glb |
Create a rectangular tray for board game components with overall dimensions of 116.5mm in length, 62mm in width, and 15mm in height. The outer walls should have rounded corners with a radius of 3mm.
Hollow out the interior to create two main compartments. To do this, remove two vertical cylinders, each with a diamete... | $fn=100;
difference(){
roundedCube(116.5,62,15);
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([6,0,0]){
translate([12,1.5,2])
cube([41,59,62]);
translate([54.5,1.5,2])
cube([37,59,62]);
}
trans... | glb/cad_47425aa5e9b3.glb |
Create a rectangular tray for board game components with overall dimensions of 116.5mm in length, 62mm in width, and 13mm in height. The outer shell should have rounded corners with a radius of 3mm.
Hollow out the main body by removing a central rectangular block starting 1mm from the bottom, measuring 92.5mm long, 5... | $fn=100;
difference(){
roundedCube(116.5,62,13);
translate([12,2.5,1])
for(i = [0:6]){
translate([(i*13.5),0,0])
cube([11.5,57,62]);
}
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([12,2.5,8])
cub... | glb/cad_323c9b5d889f.glb |
Create a colony organizer tray by starting with a rounded rectangular block that is 175mm wide, 116.5mm deep, and 66mm high, with all exterior corners rounded by a 5mm radius. Hollow out the center to create a walls-and-floor structure with a 5mm wall thickness.
Inside this shell, carve out three distinct storage com... | $fn=100;
difference(){
translate([5,5,0])
minkowski(){
cube([165,106.5,33]);
sphere(r=5);
}
translate([-1,-1,28])
cube([180,120,28]);
translate([-1,-1,-28])
cube([180,120,28]);
translate([1.5,6.75,1.5])
cube([60,103,62]);
translate([0,58.25,-1])
rotate([0,0,0])
cylinder(h=400, d=30, center=false);
translate([73.5... | glb/cad_bc0d78136973.glb |
Create a rectangular tray for board game components with overall dimensions of 116.5mm in length, 62mm in width, and 13mm in height.
Hollow out the center of the block to create a main compartment that is 92.5mm long, 57mm wide, and 12mm deep, leaving a wall thickness of 12mm on the left side, 2.5mm on the front and ... | $fn=100;
difference(){
cube([116.5,62,13]);
translate([12,2.5,1])
for(i = [0:6]){
translate([(i*13.5),0,0])
cube([11.5,57,62]);
}
translate([0,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([116.5,30,-1])
rotate([0,0,0])
cylinder(h=400, d=21.5, center=false);
translate([12,2.5,8])
cube([92... | glb/cad_0c81f3aae01e.glb |
Create a game organizer insert by starting with a base rounded rectangular block measuring 141mm x 91mm x 15mm with a corner radius of 3mm. From this base, carve out several specific compartments.
First, create a rounded rectangular cutout for phase tiles measuring 50mm x 50mm x 13mm, positioned at (29, 2, 1). In this... | $fn=50;
difference(){
roundedCube(141,91,15);
translate([29,2,1])
roundedCube(50,50,15);
translate([54,0,-1])
rotate([0,0,0])
cylinder(h=400, d=25, center=false);
translate([50,72,1])
phex(41,0.5,15);
translate([50,91,-1])
rotate([0,0,0])
cylinder(h=400, d=20, center=false);
translate([93,72,1])
phex(41,0.5,15);
... | glb/cad_7e16f79e2140.glb |
Create a rectangular organizer tray for the Terraforming Mars: Ares Expedition game. Start with a solid outer block measuring 98mm wide, 180mm deep, and 70mm high. Hollow out the center by removing a rectangular volume of 95mm by 142mm with a height of 100mm, positioned 1.5mm from the side wall and 36mm from the front ... | $fn=100;
difference(){
cube([98,180,70]);
translate([1.5,36,2])
cube([95,142,100]);
translate([1.5,2,2])
rotate([-25,0,0])
cube([95,100,78]);
translate([49.5,250,70])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
}
cube([98,180,2]); | glb/cad_c3cdb6635f39.glb |
Create a rectangular tray for the Terraforming Mars: Ares Expedition game with overall outer dimensions of 141mm in length, 91mm in width, and 13mm in height. The outer walls should have a corner radius of 3mm.
Inside this main body, carve out two separate rectangular compartments with rounded bottoms. The first comp... | $fn=50;
difference(){
roundedCube(141,91,13);
translate([12,12,11])
minkowski(){
cube([60,67,23]);
sphere(r=10);
}
translate([95,12,11])
minkowski(){
cube([34,67,23]);
sphere(r=10);
}
}
module roundedCube(x,y,z)
{
r=3;
translate([r,r,0])
minkowski()
{
cube([x-(2*r), y-(2*r), z-r]);
cylinder(r,r,r);
}
} | glb/cad_f15dcea78db5.glb |
Create a rectangular block with dimensions 98mm wide, 91mm deep, and 70mm high. From this solid base, carve out three rectangular slots and one semi-cylindrical finger notch to create an organizer.
Position the first slot 1.5mm from the front and side edges, starting 2mm from the bottom, with dimensions 95mm wide, 20... | $fn=100;
difference(){
cube([98,91,70]);
translate([1.5,1.5,2])
cube([95,20,100]);
translate([1.5,23,2])
cube([95,45,100]);
translate([1.5,69.5,2])
cube([95,20,100]);
translate([49.5,250,70])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_ef22ad361ac7.glb |
Create a rectangular organizer tray for the Terraforming Mars: Ares Expedition game. Start with a solid base block measuring 141mm in length, 91mm in width, and 12mm in height. Apply a 3mm fillet to the vertical edges of this base to round the corners.
Within this base, carve out four identical rectangular compartment... | $fn=50;
difference(){
roundedCube(141,91,12);
translate([12,0,0])
for (i = [0:1]){
translate([i*70,12,11])
minkowski(){
cube([47,22,23]);
sphere(r=10);
}
}
translate([12,45,0])
for (i = [0:1]){
translate([i*70,12,11])
minkowski(){
cube([47,22,23]);
sphere(r=10);
}
}
}
module roundedCube(x,y,z)
{
r=3;
translate([r,... | glb/cad_63331de50756.glb |
Create a rectangular storage box for the Terraforming Mars: Ares Expedition game. Start with a solid outer block measuring 98mm in width, 59mm in depth, and 70mm in height. Hollow out the center by removing a smaller rectangular block measuring 95mm by 56mm, starting from a position 1.5mm from the front and side walls ... | $fn=100;
difference(){
cube([98,59,70]);
translate([1.5,1.5,2])
cube([95,56,100]);
translate([49.5,250,70])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_19387a1bfc73.glb |
Create a rectangular tray with overall dimensions of 141mm in length, 91mm in width, and 15mm in height. The outer edges of this base should be rounded with a radius of 3mm.
Inside this base, carve out three separate rectangular compartments with rounded interior corners (10mm radius). The first compartment on the le... | $fn=50;
difference(){
roundedCube(141,91,15);
translate([12,12,11])
minkowski(){
cube([20,67,23]);
sphere(r=10);
}
translate([55,12,11])
minkowski(){
cube([15,67,23]);
sphere(r=10);
}
translate([93,12,11])
minkowski(){
cube([36,67,23]);
sphere(r=10);
}
}
module roundedCube(x,y,z)
{
r=3;
translate([r,r,0])
minkows... | glb/cad_552c81b1b401.glb |
Create a rectangular organizer tray for the Fantastic Factories board game. Start with a solid rounded cube measuring 137mm in length, 70mm in width, and 22mm in height, using a corner radius of 3mm.
Hollow out the center of this block to create a storage compartment. The interior cavity should be 104mm long and 67mm... | $fn=100;
difference(){
roundedCube(137,70,22);
translate([15,0,0]){
translate([1.5,1.5,1.5])
roundedCube(104,67,100);
}
translate([0,35,-1])
rotate([0,0,0])
cylinder(h=400, d=29, center=false);
translate([137,35,-1])
rotate([0,0,0])
cylinder(h=400, d=29, center=false);
}
module roundedCube(x,y,z)
{
r=3;
transla... | glb/cad_929c200dbb03.glb |
Create a rectangular organizer block for a board game insert with overall dimensions of 102mm in width, 13mm in depth, and 65mm in height.
Carve two distinct rectangular slots into the top surface. The first slot, intended for a player marker, should be 37mm wide, 11.4mm deep, and 100mm long, positioned starting at x... | $fn=100;
difference(){
cube([102,13,65]);
translate([15,0.8,31])
cube([37,11.4,100]);
translate([33.5,250,65])
rotate([90,0,0])
cylinder(h=400, d=25, center=false);
translate([55,2,33])
cube([32,9,100]);
translate([71,250,65])
rotate([90,0,0])
cylinder(h=400, d=25, center=false);
} | glb/cad_0309055f60eb.glb |
Create a rectangular organizer box for the Fantastic Factories board game. Start by creating a solid outer rectangular prism with dimensions of 70mm in width, 50mm in depth, and 65mm in height. From this solid, remove a smaller rectangular volume to create a hollow interior. This interior cutout should be 67mm wide and... | $fn=100;
difference(){
cube([70,50,65]);
translate([1.5,1.5,1])
cube([67,47,100]);
} | glb/cad_06364ba7f9b7.glb |
Create a game organizer tray by starting with a base rectangular block measuring 177mm in length, 102mm in width, and 22mm in height, with the corners rounded to a 3mm radius. Carve out several compartments from the top surface to create storage areas.
Along the bottom edge, create two identical side-by-side slots, e... | $fn=50;
difference(){
roundedCube(177,102,22);
translate([12,0,0])
for (i = [0:1]){
translate([i*72,12,11])
minkowski(){
cube([50,8,23]);
sphere(r=10);
}
}
translate([12,30,0])
for (i = [0:0]){
translate([i*72,12,11])
minkowski(){
cube([50,18,23]);
sphere(r=10);
}
}
translate([12,30,0])
for (i = [1:1]){
translate([... | glb/cad_5cdae8f8b10e.glb |
Create a game organizer insert for Fantastic Factories with an overall outer dimension of 95mm width, 85mm depth, and 65mm height. Hollow out the interior to create three distinct rectangular compartments, each with a base thickness of 1mm. The first compartment for base game cards should be 92mm wide, 38mm deep, and 1... | $fn=100;
difference(){
cube([95,85,65]);
translate([1.5,1.5,1])
cube([92,38,100]);
translate([1.5,41,1])
cube([92,26,100]);
translate([1.5,68.5,1])
cube([92,15,100]);
translate([47.5,250,65])
rotate([90,0,0])
cylinder(h=400, r=27.5, center=false);
} | glb/cad_f0519b037210.glb |
Create a resource tray for a board game organizer by starting with a rounded rectangular block measuring 137mm in length, 70mm in width, and 26mm in height, with corner radii of 3mm. Hollow out the center of this block to create a storage compartment that is 104mm long, 60mm wide, and 100mm deep, positioned 15mm from t... | $fn=100;
difference(){
roundedCube(137,70,26);
translate([15,0,0]){
translate([1.5,5,2])
cube([104,60,100]);
translate([53.5,70,-1])
rotate([0,0,0])
cylinder(h=400, d=25, center=false);
translate([53.5,0,-1])
rotate([0,0,0])
cylinder(h=400, d=25, center=false);
}
translate([0,35,-1])
rotate([0,0,0])
cylinder(h=4... | glb/cad_2ce846e075cf.glb |
Create a game organizer insert by starting with a solid rectangular block measuring 95mm wide, 85mm deep, and 65mm high. From this block, remove several rectangular sections to create open storage compartments, all starting from a base height of 1mm. Carve out three narrow slots, each 92mm wide and 14mm deep, positione... | $fn=100;
difference(){
cube([95,85,65]);
translate([1.5,1.5,1])
cube([92,14,100]);
translate([1.5,17,1])
cube([92,14,100]);
translate([1.5,32.5,1])
cube([92,14,100]);
translate([1.5,48,1])
cube([92,26,100]);
translate([1.5,75.5,1])
cube([92,8,100]);
translate([47.5,250,65])
rotate([90,0,0])
cylinder(h=400, r=27... | glb/cad_0a823e36fa22.glb |
Create a dice tray organizer by starting with a rectangular block measuring 137mm in length, 70mm in width, and 17mm in height, ensuring all vertical edges are rounded with a 3mm radius.
Carve five parallel dice channels into the top surface. Each channel should be 17mm wide and 63mm long, spaced 18.5mm apart startin... | $fn=100;
difference(){
roundedCube(137,70,17);
translate([16,0,0]){
translate([7,3.5,1])
for(i = [0:4]){
translate([(i*18.5),0,0])
cube([17,63,62]);
}
translate([7,3.5,12])
cube([90.5,63,62]);
translate([15.5,1.5,1])
for(i = [0:4]){
translate([(i*18.5),75,12])
rotate([90,0,0])
cylinder(h=400, d=15, center=false);
... | glb/cad_65b5ba2a4b0e.glb |
Create a dice tray for the Fantastic Factories board game by starting with a rectangular block measuring 137mm in length, 70mm in width, and 17mm in height, ensuring all vertical edges are rounded with a 3mm radius.
Carve five parallel dice channels into the top surface. Each channel should be 18mm wide, 64.5mm long,... | $fn=100;
difference(){
roundedCube(137,70,17);
translate([13.5,0,0]){
translate([7,2.75,1])
for(i = [0:4]){
translate([(i*19.5),0,0])
cube([18,64.5,62]);
}
translate([7,2.75,12])
cube([95.5,64.5,62]);
translate([16,1.5,1])
for(i = [0:4]){
translate([(i*19.5),75,12])
rotate([90,0,0])
cylinder(h=400, d=15, center=fal... | glb/cad_f4d2ae0acbbb.glb |
Create a board game organizer tray by starting with a rounded rectangular base that measures 156mm in length, 38mm in width, and 6mm in height, with corner radii of 1mm. Within this base, carve out two rectangular slots. The first slot is a vertical cutout measuring 2.5mm by 25mm by 6mm, positioned 4.25mm from the left... | $fn=100;
roundedCube(156,38,2);
translate([4.25,6.5,0])
cube([2.5,25,6]);
translate([149.25,6.5,0])
cube([2.5,25,6]);
module roundedCube(x,y,z)
{
r=1;
translate([r,r,0])
minkowski()
{
cube([x-(2*r), y-(2*r), z-r]);
cylinder(r,r,r);
}
} | glb/cad_fd472fb3e7d1.glb |
Create a board game organizer tray with a base measuring 144mm in length, 70mm in width, and 30mm in height. From this solid base, carve out a large central rectangular void starting 1mm from the bottom, with dimensions of 141mm by 57.4mm, leaving a wall thickness of 1.5mm on the sides and 6.3mm on the ends.
Within th... | $fn=100;
difference(){
cube([144,70,30]);
translate([1.5,6.3,1])
cube([141,57.4,100]);
translate([5,1.5,1])
for (i = [0:2]){
translate([i*43.5,0,0])
cube([27,3.3,100]);
translate([3.5,2.5,0])
translate([i*43.5,0,0])
cube([20,3.3,100]);
}
translate([25.5,65.2,1])
for (i = [0:2]){
translate([i*43.5,0,0])
cube([27,3... | glb/cad_f173b755e459.glb |
Create a board game organizer tray by starting with a solid rectangular base measuring 144mm in length, 70mm in width, and 8.5mm in height. From this base, carve out two identical rectangular voids to create two open compartments. Each void should measure 69.75mm in length, 67mm in width, and 15mm in depth. Position th... | $fn=100;
difference(){
cube([144,70,8.5]);
translate([1.5,1.5,-1])
cube([69.75,67,15]);
translate([72.75,1.5,-1])
cube([69.75,67,15]);
} | glb/cad_8bddce13a14e.glb |
Create a board game organizer tray by starting with a rounded rectangular base measuring 156mm in length, 38mm in width, and 15mm in height.
Within this base, carve out a series of cylindrical holes, each with a diameter of 18mm and a depth of 20mm, arranged in two parallel rows. The first row of holes is centered al... | $fn=100;
difference(){
roundedCube(156,38,15);
translate([8,2,0]){
translate([11.5,7,1])
cylinder(h=20, d=18, center=false);
translate([11.5,-6,-1])
cylinder(h=20, d=18, center=false);
translate([31,7,3])
cylinder(h=20, d=18, center=false);
translate([31,-6,-1])
cylinder(h=20, d=18, center=false);
translate([50.... | glb/cad_8d2c7bd996a1.glb |
Create a board game organizer tray by starting with a base rounded rectangular block measuring 156mm in length, 103mm in width, and 17.5mm in height, with corner radii of 3mm.
Carve out five distinct rectangular compartments with rounded internal corners (10mm radius) to create storage slots. Position the first two s... | $fn=50;
difference(){
roundedCube(156,103,17.5);
translate([12,0,0]){
translate([16,12,17])
minkowski(){
cube([39,35,23]);
sphere(r=10);
}
translate([77,12,17])
minkowski(){
cube([39,35,23]);
sphere(r=10);
}
translate([12,69,11])
minkowski(){
cube([35,22,23]);
sphere(r=10);
}
translate([69,69,11])
minkowski(){
cu... | glb/cad_3f06750503dd.glb |
Create a board game organizer tray by starting with a solid rectangular block measuring 141mm in width, 42mm in depth, and 66mm in height.
Carve out two large rectangular voids to create side compartments. Position the first void 1.5mm from the left edge and 1.5mm from the front face, with dimensions of 67mm wide, 39... | $fn=50;
difference(){
cube([141,42,66]);
translate([1.5,1.5,1])
cube([67,39,80]);
translate([72.5,1.5,1])
cube([67,39,80]);
translate([34.25,70,66])
rotate([90,0,0])
cylinder(h=80, r=20, center=false);
translate([105.5,70,66])
rotate([90,0,0])
cylinder(h=80, r=20, center=false);
} | glb/cad_634c19f575ea.glb |
Create a board game organizer tray by starting with a solid rectangular block measuring 141mm in width, 42mm in depth, and 65mm in height.
Carve out two long, parallel rectangular channels to create storage rows. The first channel begins 1.5mm from the left edge and 1.5mm from the front edge, measuring 67mm wide, 6mm... | $fn=50;
difference(){
cube([141,42,65]);
translate([1.5,1.5,1])
cube([67,6,80]);
translate([1.5,9,1])
cube([67,6,80]);
translate([1.5,16.5,1])
cube([67,6,80]);
translate([1.5,24,1])
cube([67,16.5,80]);
translate([72.5,1.5,1])
cube([67,6,80]);
translate([72.5,9,1])
cube([67,6,80]);
translate([72.5,16.5,1])
cube([67,... | glb/cad_d93394ac849d.glb |
Create a board game organizer tray by starting with a base rounded rectangular block measuring 156mm in width, 141mm in depth, and 23.5mm in height, with corner radii of 3mm.
Carve out several storage compartments from this base. First, create a large rectangular void for the wall tray measuring 65mm by 57mm, positio... | $fn=50;
difference(){
roundedCube(156,141,23.5);
translate([0,0,0]){
translate([2,82,9.5])
roundedCube(65,57,80);
translate([34.5,150,33])
rotate([90,0,0])
cylinder(h=20, d=47, center=false);
translate([40.5,0,0]){
translate([99,127,1])
rotate([0,0,0])
cylinder(h=400, d=26, center=false);
translate([99,148,1])
ro... | glb/cad_4bbc95080e49.glb |
Create a board game organizer tray with a rectangular base measuring 144mm by 70mm and a height of 8mm. The base consists of a solid slab 2mm thick, positioned 6mm above the origin.
Within this base, carve out two large vertical cylindrical holes, each 35mm in diameter, centered at the left and right edges of the tra... | $fn=100;
translate([5.2,1.5,1])
for (i = [0:2]){
translate([i*43.5,0,0])
cube([26.5,3.1,5]);
translate([3.5,2.5,0])
translate([i*43.5,0,0])
cube([19.5,3.1,5]);
}
translate([25.7,65.2,1])
for (i = [0:2]){
translate([i*43.5,0,0])
cube([26.5,3.1,5]);
translate([3.5,-2.5,0])
translate([i*43.5,0,0])
cube([19.5,3.1,5]);
... | glb/cad_104b9e7da137.glb |
Create a Lost Expedition game organizer tray by starting with a base rectangular block measuring 124.5mm in length, 64.5mm in width, and 12mm in height, ensuring all exterior corners are rounded with a 3mm radius. Carve out four distinct storage compartments from the top surface, each starting 1mm from the base. First,... | $fn=100;
difference(){
roundedCube(124.5,64.5,12);
translate([20.5,32.25,1])
cylinder(d=37,h=20);
translate([0,32.25,1])
cylinder(d=20,h=20);
translate([42,2,1])
roundedCube(21,60.5,23);
translate([52.5,67,15])
rotate([90,0,0])
cylinder(d=22,h=70);
translate([76,12,11])
minkowski(){
cube([36.5,40.5,23]);
sphere(r... | glb/cad_a9c3af1a71fa.glb |
Create a Lost Expedition Insert organizer with an overall footprint of 85.5mm wide, 150mm long, and 29mm high. The main body is a solid block with rounded corners of 3mm radius.
Carve out three distinct storage compartments from this block. The first is a long, narrow rectangular tray measuring 82.5mm wide and 22.5mm... | $fn=50;
difference(){
roundedCube(85.5,150,29);
translate([1.5,25.5,1])
roundedCube(82.5,123,29);
translate([1.5,1.5,1])
roundedCube(82.5,22.5,29);
translate([42.75,150,-1])
cylinder(d=25,h=32);
translate([12.5,35.5,-1])
roundedCube(60,95,29);
}
difference(){
translate([84,0,0])
roundedCube(126,85.5,29);
transl... | glb/cad_14e0a39e9b77.glb |
Create a Lost Expedition organizer tray by starting with a solid rectangular block measuring 124.5mm in length, 64.5mm in width, and 17mm in height, ensuring all exterior vertical edges are rounded with a 3mm radius. Carve three distinct open-top compartments into the top surface of this block, each featuring interior ... | $fn=100;
difference(){
roundedCube(124.5,64.5,17);
translate([12,12,11])
minkowski(){
cube([45,40.5,23]);
sphere(r=10);
}
translate([79,12,11])
minkowski(){
cube([1,40.5,23]);
sphere(r=10);
}
translate([102,12,11])
minkowski(){
cube([10.5,40.5,23]);
sphere(r=10);
}
}
module roundedCube(x,y,z)
{
r=3;
translate([r,... | glb/cad_99a4c13dac6e.glb |
Create a board game organizer insert by starting with a solid rectangular block measuring 153mm wide, 191.5mm deep, and 54mm high. Hollow out the center of this block by removing a smaller rectangular volume that is 149mm wide, 187.5mm deep, and 65mm high, positioned 2mm from the front, left, and bottom edges. To creat... | $fn=50;
difference(){
cube([153,191.5,54]);
translate([2,2,2])
cube([149,187.5,65]);
translate([74.5,200,70])
rotate([90,0,0])
cylinder(h=400, r=59, center=false);
translate([-1,95.75,70])
rotate([0,90,0])
cylinder(h=400, r=59, center=false);
} | glb/cad_aff55ec10192.glb |
Create a board game organizer insert by starting with a solid rectangular block measuring 133mm wide, 191.5mm deep, and 16mm high. From this base, carve out two primary rectangular voids to create trays. The first void is positioned 1.5mm from the front and side edges, measuring 130mm wide, 62mm deep, and 20mm high. Th... | $fn=50;
difference(){
cube([133,191.5,16]);
translate([1.5,1.5,1])
cube([130,62,20]);
translate([9.5,9.5,-1])
cube([114,46,20]);
translate([1.5,65,1])
cube([130,125,20]);
translate([18.5,85,-1])
cube([96,85,20]);
translate([66.5,70,16])
rotate([90,90,0])
cylinder(h=20, d=30, center=false);
}
modu... | glb/cad_f9c77b1aefef.glb |
Create a board game organizer tray by starting with a solid rectangular block measuring 133mm wide, 191.5mm deep, and 38mm high. Hollow out the center of this block by removing a smaller rectangular volume that is 129mm wide, 187.5mm deep, and 63mm high, positioned 2mm from the front, left, and bottom edges. To create ... | $fn=50;
difference(){
cube([133,191.5,38]);
translate([2,2,2])
cube([129,187.5,65]);
translate([66.5,200,70])
rotate([90,0,0])
cylinder(h=400, r=59, center=false);
translate([-1,95.75,70])
rotate([0,90,0])
cylinder(h=400, r=59, center=false);
} | glb/cad_fd816c1e970a.glb |
Create a board game organizer insert by starting with a solid rectangular block measuring 73mm wide, 94.5mm deep, and 54mm high. From this block, carve out a series of rectangular slots and a large cylindrical void.
The rectangular slots are all 70mm wide and 100mm long, positioned 1.5mm from the front edge. Create th... | $fn=100;
difference(){
cube([73,94.5,54]);
translate([1.5,1.5,6])
cube([70,6,100]);
translate([1.5,9,6])
cube([70,10,100]);
translate([1.5,20.5,6])
cube([70,8,100]);
translate([1.5,30,6])
cube([70,10,100]);
translate([1.5,41.5,6])
cube([70,6,100]);
translate([1.5,49,6])
cube([70,12,100]);
translate([1.5,62.5,6])
cub... | glb/cad_ffac5750bb5b.glb |
Create a board game organizer insert by starting with a rounded rectangular block measuring 113.5mm in width, 94.5mm in depth, and 24mm in height, with corner radii of 3mm.
Carve out two identical rectangular wells, each with a base of 15mm by 24mm and a depth of 23mm, featuring rounded internal corners with a 10mm r... | $fn=50;
difference(){
roundedCube(113.5,94.5,24);
translate([29.5,0,0])
for (i = [0:1]){
translate([i*37,12,18])
minkowski(){
cube([15,24,23]);
sphere(r=10);
}
}
translate([29.5,46.5,0])
for (i = [0:1]){
translate([i*37,12,18])
minkowski(){
cube([15,24,23]);
sphere(r=10);
}
}
translate([29.5,0,0])
translate([64,2,6... | glb/cad_43a22ac6dcba.glb |
Create a board game organizer tray by starting with a base rectangular block measuring 213mm in length, 94.5mm in width, and 15mm in height, ensuring the corners are rounded with a 3mm radius. Within this base, carve out several recessed compartments. Create two identical small rectangular wells, each 44mm wide, 34mm d... | $fn=50;
difference(){
roundedCube(213,94.5,15);
translate([29.5,0,0])
for (i = [0:1]){
translate([i*56,12,11])
minkowski(){
cube([34,24,23]);
sphere(r=10);
}
}
translate([29.5,46.5,0])
for (i = [0:1]){
translate([i*56,12,11])
minkowski(){
cube([34,24,23]);
sphere(r=10);
}
}
translate([29.5,34.5,0])
translate([112,1... | glb/cad_6680669b4c3a.glb |
Create a rectangular organizer block with dimensions 99.5mm in width, 94.5mm in depth, and 24mm in height. Round the vertical edges of this block with a 3mm radius.
Within this block, carve out four identical rectangular compartments. Each compartment should have a base dimension of 18.5mm by 24mm and a depth of 23mm... | $fn=50;
difference(){
roundedCube(99.5,94.5,24);
translate([28.5,0,0])
for (i = [0:1]){
translate([i*40.5,12,11])
minkowski(){
cube([18.5,24,23]);
sphere(r=10);
}
}
translate([28.5,46.5,0])
for (i = [0:1]){
translate([i*40.5,12,11])
minkowski(){
cube([18.5,24,23]);
sphere(r=10);
}
}
translate([0,47.25,-1])
rotate([... | glb/cad_0f9c81fce9b9.glb |
Create a Tapestry game organizer tray by starting with a solid rectangular block measuring 106mm wide, 102.5mm deep, and 40.5mm high. From this block, remove a large L-shaped volume defined by a polygon with vertices at [0,0], [60,0], [60,45.5], [85,45.5], [85,59.3], and [120,59.3], extending 60mm deep to create the pr... | $fn=50;
difference(){
cube([106,102.5,40.5]);
translate([-14,0,0]){
translate([0,0,0])
linear_extrude(height=60)
polygon(points=[[60,0],[60,45.5],[85,45.5],[85,59.3],[120,59.3],[120,0]]);
}
translate([22.5,25.5,1])
rotate([0,0,30])
phex(47,0.5,60);
translate([0,25.5,-1])
rotate([0,0,0])
cylinder(h=60, d=25, center=... | glb/cad_8131f822d215.glb |
Create a Tapestry organizer tray by starting with a solid rectangular block measuring 186mm in length, 36mm in width, and 30.5mm in height.
From this block, remove a large rectangular section to create a hollow player tray. This cutout should start 1.5mm from the front and side edges, measuring 160.5mm long, 33mm wid... | $fn=100;
difference(){
cube([186,36,30.5]);
translate([1.5,1.5,1])
cube([160.5,33,100]);
translate([163.5,0,20.5])
cube([23.5,36,100]);
translate([163.5,1.5,1])
cube([21,33,100]);
translate([174,200,20.5])
rotate([90,0,0])
cylinder(h=400, r=10.5, center=false);
} | glb/cad_449c116ac08f.glb |
Create a Tapestry game insert tray by starting with a solid rectangular block measuring 136.5mm in width, 98mm in depth, and 42.5mm in height. From this block, carve out four distinct storage compartments.
First, create the Fusion Reactor slot by removing a rectangular volume of 43mm by 8mm by 45mm, positioned 1.5mm f... | $fn=50;
difference(){
cube([136.5,98,42.5]);
translate([0,0,0]){
translate([1.5,1.5,1])
cube([43,8,45]);
translate([1.5,9.5,3])
linear_extrude(height=50)
polygon(points=[[5,0],[5,8],[7,8],[7,30],[0,49],[9,68],[27,68],[36,49],[32,31],[26,31],[26,16],[38,5],[38,0]]);
translate([23,-1,42.5])
rotate([270,0,0])
cylinder... | glb/cad_9de2fcfef93d.glb |
Create a Tapestry organizer tray by starting with a solid rectangular block measuring 186mm in length, 82mm in width, and 42.5mm in height. From this block, carve out several custom-shaped compartments to hold game miniatures and components.
First, create a rectangular slot for the Comm Tower at position (1.5, 1.5, 1)... | $fn=50;
difference(){
cube([186,82,42.5]);
translate([1.5,1.5,1])
cube([29,6,45]);
translate([1.5,7.5,4])
cube([29,16,45]);
translate([16,23.5,20])
rotate([270,0,0])
cylinder(h=46.5, d=18, center=false);
translate([7,23.5,19])
cube([18,46.5,45]);
translate([16,-1,42.5])
rotate([270,0,0])
cylinder(h=5, d=25, center=f... | glb/cad_4aeacf45a559.glb |
Create a rectangular tray for a game insert with outer dimensions of 120mm in length, 89mm in width, and 12.5mm in height. Hollow out the center of the tray by removing a rectangular block that is 117mm long, 86mm wide, and 60mm deep. This interior cutout should be centered within the outer walls, leaving a base thickn... | $fn=50;
difference(){
cube([120,89,12.5]);
translate([1.5,1.5,1])
cube([117,86,60]);
} | glb/cad_0c59b65e9d7c.glb |
Create a rectangular tray for a board game insert with outer dimensions of 121.5mm in width, 180mm in length, and 20mm in height. Hollow out the center of the tray to create a storage compartment that is 118.5mm wide, 177mm long, and 100mm deep, leaving a wall thickness of 1.5mm on the sides and a base thickness of 1.5... | $fn=100;
difference(){
cube([121.5,180,20]);
translate([1.5,1.5,1.5])
cube([118.5,177,100]);
translate([0,90,-1])
rotate([0,0,0])
cylinder(h=400, r=15, center=false);
} | glb/cad_ffe275925f77.glb |
Create a Tapestry game organizer by starting with a solid rectangular block measuring 98mm wide, 147.5mm deep, and 63mm high. From this block, remove several rectangular sections to create storage slots, all starting from a base height of 1mm.
First, carve out a slot for Tapestry Cards at position (1.5, 1.5) with dime... | $fn=100;
difference(){
cube([98,147.5,63]);
translate([1.5,1.5,1])
cube([95,53.5,100]);
translate([1.5,56.5,1])
cube([95,27.5,100]);
translate([1.5,85.5,1])
cube([95,7.5,100]);
translate([1.5,94.5,1])
cube([95,7.5,100]);
translate([1.5,103.5,1])
cube([95,26,100]);
translate([18,131,1])
cube([62,15,100]);
trans... | glb/cad_cd929a64faab.glb |
Create a rectangular tray for game mats with overall outer dimensions of 163.5mm in width, 180mm in depth, and 10mm in height. Inside this volume, carve out a central rectangular cavity starting 1.5mm from the left and front edges, measuring 160.5mm wide and 177mm deep, with a depth of 100mm (effectively creating a wal... | $fn=100;
difference(){
cube([163.5,180,10]);
translate([1.5,1.5,1.5])
cube([160.5,177,100]);
translate([0,90,-1])
rotate([0,0,0])
cylinder(h=400, r=15, center=false);
} | glb/cad_d05bbcc04d36.glb |
Create a Tapestry organizer tray by starting with a solid rectangular block measuring 120mm wide, 99mm deep, and 42.5mm high. From this block, remove several geometric volumes to create custom storage compartments.
First, carve out two intersecting rectangular voids for the Rubber Works: one measuring 57mm by 29mm and... | $fn=50;
difference(){
cube([120,99,42.5]);
translate([0,0,0]){
translate([1.5,1.5,3])
cube([57,29,45]);
translate([1.5,1.5,3])
cube([29,57,45]);
}
translate([60,1.5,1])
cube([43,8.5,45]);
translate([69,8.5,6])
linear_extrude(height=50)
polygon(points=[[-1,0],[-1,25],[6,32],[13,26],[29,26],[29,0]]);
translate([81.... | glb/cad_7fcd734b893f.glb |
Create a Tapestry game insert tray by starting with a solid rectangular block measuring 120mm wide, 97mm deep, and 42.5mm high. From this block, remove the following geometric volumes to create storage compartments:
First, carve out two intersecting rectangular prisms at the front-left corner, each measuring 57mm by 2... | $fn=50;
difference(){
cube([120,97,42.5]);
translate([0,0,0]){
translate([1.5,1.5,3])
cube([57,29,45]);
translate([1.5,1.5,3])
cube([29,57,45]);
}
rotate([0,0,180])
translate([-112,-97,0]){
translate([60,1.5,1])
cube([43,8.5,45]);
translate([69,8.5,6])
linear_extrude(height=50)
polygon(points=[[-1,0],[-1,25],[6,32... | glb/cad_a4d0e5a9210e.glb |
Create a Tapestry game organizer insert by starting with a solid rectangular block measuring 98mm wide, 149.5mm deep, and 63mm high. From this main volume, carve out several rectangular voids to create storage compartments, all starting from a base height of 1mm.
First, create a large void for Tapestry Cards measuring... | $fn=100;
difference(){
cube([98,149.5,63]);
translate([1.5,1.5,1])
cube([95,54,100]);
translate([1.5,57,1])
cube([95,28,100]);
translate([1.5,86.5,1])
cube([95,8,100]);
translate([1.5,96,1])
cube([95,8,100]);
translate([1.5,105.5,1])
cube([95,26,100]);
translate([18,133,1])
cube([62,15,100]);
translate([49.5,2... | glb/cad_f7fd5d630505.glb |
Create a Tapestry game organizer tray by starting with a solid rectangular block measuring 136.5mm in length, 98mm in width, and 21.5mm in height. From this base, remove several geometric volumes to create storage compartments.
First, remove a rectangular section measuring 30.5mm by 98mm with a height of 50mm, positio... | $fn=50;
difference(){
cube([136.5,98,21.5]);
translate([106,0,9.5])
cube([30.5,98,50]);
translate([33,69.5,1])
phex(62,0.5,30);
translate([33,98,-1])
rotate([0,0,0])
cylinder(h=30, d=25, center=false);
translate([73.5,28.5,1])
phex(62,0.5,30);
translate([73.5,0,-1])
rotate([0,0,0])
cylinder(h=30, d=25, center=fal... | glb/cad_14756ff8f160.glb |
Create a rectangular tray for a board game insert with overall outer dimensions of 238.8mm in length, 106mm in width, and 8mm in height.
Inside this outer shell, carve out a large rectangular recessed area starting 15.3mm from the left edge and 4.5mm from the front edge, measuring 222mm long, 97mm wide, and 100mm dee... | $fn=100;
difference(){
cube([238.8,106,8]);
cube([13.8,35,8]);
translate([15.3,4.5,1])
cube([222,97,100]);
translate([0,83,-1])
rotate([0,0,0])
cylinder(h=400, d=28, center=false);
translate([238.8,53,-1])
rotate([0,0,0])
cylinder(h=400, d=28, center=false);
} | glb/cad_4d8c1177dfb1.glb |
Create a rectangular block measuring 120mm in width, 89mm in depth, and 70.5mm in height. From this solid volume, remove the following geometric shapes to create hollows:
First, carve out a complex polygonal void starting at position (61.5, 1.5, 12.5) with a height of 60mm. The footprint of this void is defined by the... | $fn=50;
difference(){
cube([120,89,70.5]);
translate([0,0,0]){
translate([61.5,1.5,12.5])
linear_extrude(height=60)
polygon(points=[[13,0],[13,13],[0,13],[0,42],[25,42],[25,56],[43,56],[43,43],[57,43],[57,0]]);
}
translate([0,0,0]){
translate([1.5,1.5,1])
cube([8,57,60]);
translate([39.5,31.5,1])
rotate([0,0,0])
cy... | glb/cad_2cc886d770cd.glb |
Create a rectangular tray for a game organizer with outer dimensions of 120.5mm in width, 180mm in length, and 20mm in height. Hollow out the center of the tray to create a storage compartment that is 117.5mm wide, 177mm long, and 100mm deep, leaving a wall thickness of 1.5mm on the sides and a base thickness of 1.5mm.... | $fn=100;
difference(){
cube([120.5,180,20]);
translate([1.5,1.5,1.5])
cube([117.5,177,100]);
translate([0,90,-1])
rotate([0,0,0])
cylinder(h=400, r=15, center=false);
} | glb/cad_260942fac823.glb |
Create a rectangular tray for game cards and tokens with overall dimensions of 136.5mm in length, 98mm in width, and 11mm in height.
Inside this block, carve out four rounded rectangular compartments. Each compartment should be 114mm long, 23mm wide, and 20mm deep. Position these compartments starting at coordinates ... | $fn=50;
difference(){
cube([136.5,98,11]);
translate([1.5,1.5,1])
for (i = [0:3]){
translate([0,i*24,0])
roundedCube(114,23,20);
translate([-1.5,(i*24)+12,-2])
rotate([0,0,0])
cylinder(h=20, d=15, center=false);
}
translate([136.5,49,-1])
rotate([0,0,0])
cylinder(h=20, d=35, center=false);
}
module roundedCube(x,y... | glb/cad_fb2aee3b6817.glb |
Create a Tapestry game insert tray by starting with a solid rectangular block measuring 106mm wide, 83.5mm deep, and 32.5mm high. From this block, carve out five distinct storage compartments and a side finger-hole.
First, create four rectangular slots for miniatures. Position the first at [1.5, 1.5, 2] with dimension... | $fn=50;
difference(){
cube([106,83.5,32.5]);
translate([0,0,0]){
translate([1.5,1.5,2])
cube([29.5,8,45]);
translate([1.5,9.5,5])
linear_extrude(height=50)
polygon(points=[[2,0],[7,25],[4,39],[16,52],[29,39],[26,26],[28,0]]);
translate([16.25,-1,32.5])
rotate([270,0,0])
cylinder(h=5, d=25, center=false);
}
transla... | glb/cad_cc23c8a75ca5.glb |
Create a Tapestry organizer tray by starting with a solid rectangular block measuring 188mm x 82mm x 42.5mm. From this base, carve out several specific compartments for game miniatures and components:
First, create a slot for the Comm Tower at (1.5, 1.5, 1) with dimensions 29mm x 6mm x 45mm, and a larger adjacent slot... | $fn=50;
difference(){
cube([188,82,42.5]);
translate([1.5,1.5,1])
cube([29,6,45]);
translate([1.5,7.5,4])
cube([29,16,45]);
translate([16,23.5,20])
rotate([270,0,0])
cylinder(h=46.5, d=18, center=false);
translate([7,23.5,19])
cube([18,46.5,45]);
translate([16,-1,42.5])
rotate([270,0,0])
cylinder(h=5, d=25, center=f... | glb/cad_8d36c3c841e2.glb |
Create a Tapestry game organizer tray by starting with a solid rectangular block measuring 188mm in length, 84mm in width, and 42.5mm in height. From this block, carve out several custom-shaped voids to house game miniatures.
First, create a void for the Skyscraper at the right end, starting at x=88mm, with a rectangu... | $fn=50;
difference(){
cube([188,84,42.5]);
translate([88,0,0]){
translate([1.5,74.5,1])
cube([43,8,45]);
translate([9.5,74.5,8])
mirror([0,1,0])
linear_extrude(height=50)
polygon(points=[[-1,0],[-1,16],[1,16],[1,37],[24,37],[26,37],[26,16],[28,16],[28,0]]);
translate([9.5,74.5,12])
mirror([0,1,0])
linear_extrude(hei... | glb/cad_97f848788d8e.glb |
Create a Tapestry game organizer tray by starting with a solid rectangular block measuring 186mm wide, 82mm deep, and 42.5mm high. From this block, carve out several custom-shaped voids to house miniatures.
First, create a void for the Skyscraper at [88, -2, 0] using a rectangular cutout of 43mm by 8mm by 45mm, and ad... | $fn=50;
difference(){
cube([186,82,42.5]);
translate([88,-2,0]){
translate([1.5,74.5,1])
cube([43,8,45]);
translate([9.5,74.5,8])
mirror([0,1,0])
linear_extrude(height=50)
polygon(points=[[0,0],[0,16],[1,16],[1,37],[24,37],[26,37],[26,16],[27,16],[27,0]]);
translate([9.5,74.5,12])
mirror([0,1,0])
linear_extrude(heig... | glb/cad_d0f1e96c6e1c.glb |
Create a Tapestry organizer tray by starting with a solid rectangular block measuring 106mm wide, 104.5mm deep, and 40.5mm high.
From this block, remove a large L-shaped volume to create the main cavity. This void is formed by a polygon with vertices at [0,0], [60,0], [60,45.5], [85,45.5], [85,59.3], and [120,59.3], ... | $fn=50;
difference(){
cube([106,104.5,40.5]);
translate([-14,0,0]){
translate([0,0,0])
linear_extrude(height=60)
polygon(points=[[60,0],[60,45.5],[85,45.5],[85,59.3],[120,59.3],[120,0]]);
}
translate([22.5,25.5,1])
rotate([0,0,30])
phex(47,0.5,60);
translate([0,25.5,-1])
rotate([0,0,0])
cylinder(h=60, d=25, center=... | glb/cad_ffd06945f64f.glb |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.