renderfy commited on
Commit
dd127d6
·
verified ·
1 Parent(s): 08d47ca

LongHaul-Bench v0/v1 canonical releases and dataset card

Browse files
README.md ADDED
@@ -0,0 +1,128 @@
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1
+ ---
2
+ license: mit
3
+ language:
4
+ - en
5
+ pretty_name: LongHaul-Bench
6
+ size_categories:
7
+ - 1K<n<10K
8
+ task_categories:
9
+ - text-generation
10
+ - question-answering
11
+ tags:
12
+ - agents
13
+ - llm-agents
14
+ - agent-memory
15
+ - benchmark
16
+ - long-horizon
17
+ - industrial
18
+ - fault-diagnosis
19
+ - edge-ai
20
+ - synthetic
21
+ configs:
22
+ - config_name: v0-standard
23
+ default: true
24
+ data_files:
25
+ - split: test
26
+ path: longhaul-v0-standard/episodes.jsonl
27
+ - config_name: v0-hard
28
+ data_files:
29
+ - split: test
30
+ path: longhaul-v0-hard/episodes.jsonl
31
+ - config_name: v1-standard
32
+ data_files:
33
+ - split: test
34
+ path: longhaul-v1-standard/episodes.jsonl
35
+ ---
36
+
37
+ # LongHaul-Bench
38
+
39
+ **Does a self-improving LLM agent get better or slowly rot over ~1,000 sequential tasks?**
40
+ LongHaul-Bench is a seed-reproducible synthetic industrial fault-diagnosis environment for measuring the
41
+ long-horizon reliability of agents that learn from their own experience, under edge constraints
42
+ (quantized small model, hard memory budget, offline).
43
+
44
+ - **Paper (preprint):** [doi:10.5281/zenodo.23624799](https://doi.org/10.5281/zenodo.23624799)
45
+ - **Code, harness, run logs, analysis scripts:** [github.com/vahit19/longhaul-bench](https://github.com/vahit19/longhaul-bench)
46
+
47
+ ## Dataset structure
48
+
49
+ Each release is one synthetic plant (five machine types, 15 component types, 16 failure modes) plus a stream
50
+ of 1,000 diagnostic episodes, generated from seed 42.
51
+
52
+ | Config | Episodes | Difficulty | Notes |
53
+ |---|---|---|---|
54
+ | `v0-standard` (default) | 1,000 | log dropout 0.3, symptom dropout 0.3 | all paper results use this tier |
55
+ | `v0-hard` | 1,000 | log dropout 0.7, symptom dropout 0.5 | |
56
+ | `v1-standard` | 1,000 | standard knobs | fault frequencies calibrated to the AI4I 2020 dataset |
57
+
58
+ An LLM-free 91-line heuristic scores 99.9% / 86.3% / 73.3% exact accuracy on the easy / standard / hard tiers.
59
+
60
+ **`episodes.jsonl`** (loaded by the configs above), one episode per line:
61
+
62
+ | Field | Description |
63
+ |---|---|
64
+ | `episode_id` | e.g. `E00001`; episodes are meant to be run **in order** |
65
+ | `machine_id` | machine the fault occurs on |
66
+ | `alarms` | list of `{code, message}` |
67
+ | `log_excerpt` | HMI/PLC-style log lines (subject to dropout) |
68
+ | `operator_note` | free-text note |
69
+ | `ground_truth` | `{component, failure_mode, repair}`: **for scoring only, never show it to the agent** |
70
+
71
+ **`world.json`** (per release, not loaded by the configs): the agent's tool corpus, with the alarm-code table,
72
+ per-machine troubleshooting manual excerpts (the retrieval corpus), and maintenance history.
73
+ The three releases share the same world file.
74
+
75
+ ```python
76
+ from datasets import load_dataset
77
+ from huggingface_hub import hf_hub_download
78
+ import json
79
+
80
+ episodes = load_dataset("renderfy/longhaul-bench", "v0-standard", split="test")
81
+ world = json.load(open(hf_hub_download("renderfy/longhaul-bench", "longhaul-v0-standard/world.json",
82
+ repo_type="dataset")))
83
+ ```
84
+
85
+ File integrity: `SHA256SUMS` matches the canonical files in the GitHub repository.
86
+
87
+ ## Protocol
88
+
89
+ The agent sees alarms, the log excerpt, and the operator note; it may call `alarm_lookup`, `manual_search`,
90
+ and `maintenance_history` over `world.json`, and must output a JSON diagnosis (component + failure mode),
91
+ scored by exact match. After each episode the environment returns outcome feedback that an improvement
92
+ operator may write into a bounded experience memory (100 records in the paper). Feedback can be corrupted
93
+ with plausible wrong diagnoses to test knowledge rot. The full harness is in the GitHub repository.
94
+
95
+ ## Reference results (paper, Qwen2.5-3B-Instruct Q4_K_M, five worlds)
96
+
97
+ | Arm | Exact accuracy (mean over 5 worlds) |
98
+ |---|---|
99
+ | frozen (no learning) | 58.2% |
100
+ | append memory | 62.0% |
101
+ | reflect memory | 61.3% |
102
+ | reflect + 40% plausible corrupted feedback | 55.3% |
103
+ | same, with manual-consistency gates | 61.3% |
104
+ | manual oracle (correct manual row given) | 76.8% |
105
+
106
+ Memory helps only when recall surfaces the correct precedent often enough: in the paper's recall-precision
107
+ decomposition the break-even recall precision is about 0.7, and plausible corruption causes rot mainly by
108
+ lowering that precision (0.81 → 0.72 → 0.65 at 0/20/40% corruption).
109
+
110
+ ## Limitations
111
+
112
+ The environment is template-generated: fault frequencies can be calibrated to public data (v1), but symptom
113
+ and log text are synthetic, and on the standard tier the LLM-free heuristic floor exceeds the 3B agent's
114
+ oracle ceiling. Results characterize memory dynamics, not absolute diagnostic competence. No proprietary or
115
+ employer data is used.
116
+
117
+ ## Citation
118
+
119
+ ```bibtex
120
+ @misc{feryad2026longhaul,
121
+ title = {LongHaul-Bench: A Reproducible Benchmark for Long-Horizon Reliability of Self-Improving LLM Agents Under Industrial Edge Constraints},
122
+ author = {Feryad, Vahit},
123
+ year = {2026},
124
+ publisher = {Zenodo},
125
+ doi = {10.5281/zenodo.23624799},
126
+ url = {https://doi.org/10.5281/zenodo.23624799}
127
+ }
128
+ ```
SHA256SUMS ADDED
@@ -0,0 +1,6 @@
 
 
 
 
 
 
 
1
+ a0194fb448a947614b3e1eff4b84a65cab441781a47a82d8fcb0d9232b18062b longhaul-v0-hard/episodes.jsonl
2
+ 1323d7425fe55fc5870fcf795c007e2a07003a41dd12a4dc071dbd45d70fb578 longhaul-v0-hard/world.json
3
+ 098ea0383f7c8b1298314e529b49326aa919119715167d7534ee7f2258489563 longhaul-v0-standard/episodes.jsonl
4
+ 1323d7425fe55fc5870fcf795c007e2a07003a41dd12a4dc071dbd45d70fb578 longhaul-v0-standard/world.json
5
+ 1bd42202794158c51174bd2048d4c652575cff91919364d6ea0b4b59d49c52e8 longhaul-v1-standard/episodes.jsonl
6
+ 1323d7425fe55fc5870fcf795c007e2a07003a41dd12a4dc071dbd45d70fb578 longhaul-v1-standard/world.json
longhaul-v0-hard/episodes.jsonl ADDED
The diff for this file is too large to render. See raw diff
 
longhaul-v0-hard/world.json ADDED
@@ -0,0 +1,699 @@
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1
+ {
2
+ "seed": 42,
3
+ "machines": [
4
+ {
5
+ "machine_id": "M01",
6
+ "machine_type": "hydraulic_pump",
7
+ "components": [
8
+ "electric_motor",
9
+ "bearing",
10
+ "hydraulic_valve",
11
+ "pressure_sensor",
12
+ "filter"
13
+ ],
14
+ "installed_year": 2011
15
+ },
16
+ {
17
+ "machine_id": "M02",
18
+ "machine_type": "air_compressor",
19
+ "components": [
20
+ "electric_motor",
21
+ "bearing",
22
+ "belt",
23
+ "temperature_sensor",
24
+ "filter"
25
+ ],
26
+ "installed_year": 2008
27
+ },
28
+ {
29
+ "machine_id": "M03",
30
+ "machine_type": "conveyor",
31
+ "components": [
32
+ "electric_motor",
33
+ "gearbox",
34
+ "belt",
35
+ "speed_sensor"
36
+ ],
37
+ "installed_year": 2016
38
+ },
39
+ {
40
+ "machine_id": "M04",
41
+ "machine_type": "cnc_mill",
42
+ "components": [
43
+ "spindle",
44
+ "bearing",
45
+ "coolant_pump",
46
+ "temperature_sensor"
47
+ ],
48
+ "installed_year": 2015
49
+ },
50
+ {
51
+ "machine_id": "M05",
52
+ "machine_type": "packaging_robot",
53
+ "components": [
54
+ "servo_motor",
55
+ "gearbox",
56
+ "proximity_sensor",
57
+ "pneumatic_valve"
58
+ ],
59
+ "installed_year": 2015
60
+ }
61
+ ],
62
+ "alarm_table": [
63
+ {
64
+ "code": "M01-A100",
65
+ "machine_id": "M01",
66
+ "symptom": "flow_low",
67
+ "message": "Flow rate below nominal"
68
+ },
69
+ {
70
+ "code": "M01-A101",
71
+ "machine_id": "M01",
72
+ "symptom": "noise",
73
+ "message": "Abnormal noise reported by operator"
74
+ },
75
+ {
76
+ "code": "M01-A102",
77
+ "machine_id": "M01",
78
+ "symptom": "overcurrent",
79
+ "message": "Motor overcurrent protection triggered"
80
+ },
81
+ {
82
+ "code": "M01-A103",
83
+ "machine_id": "M01",
84
+ "symptom": "pressure_drop",
85
+ "message": "Supply pressure below nominal"
86
+ },
87
+ {
88
+ "code": "M01-A104",
89
+ "machine_id": "M01",
90
+ "symptom": "pressure_oscillation",
91
+ "message": "Hydraulic pressure unstable"
92
+ },
93
+ {
94
+ "code": "M01-A105",
95
+ "machine_id": "M01",
96
+ "symptom": "reading_implausible",
97
+ "message": "Sensor plausibility check failed"
98
+ },
99
+ {
100
+ "code": "M01-A106",
101
+ "machine_id": "M01",
102
+ "symptom": "temperature_high",
103
+ "message": "Temperature above warning threshold"
104
+ },
105
+ {
106
+ "code": "M01-A107",
107
+ "machine_id": "M01",
108
+ "symptom": "vibration_high",
109
+ "message": "Vibration level above ISO 10816 zone B"
110
+ },
111
+ {
112
+ "code": "M02-A108",
113
+ "machine_id": "M02",
114
+ "symptom": "flow_low",
115
+ "message": "Flow rate below nominal"
116
+ },
117
+ {
118
+ "code": "M02-A109",
119
+ "machine_id": "M02",
120
+ "symptom": "noise",
121
+ "message": "Abnormal noise reported by operator"
122
+ },
123
+ {
124
+ "code": "M02-A110",
125
+ "machine_id": "M02",
126
+ "symptom": "overcurrent",
127
+ "message": "Motor overcurrent protection triggered"
128
+ },
129
+ {
130
+ "code": "M02-A111",
131
+ "machine_id": "M02",
132
+ "symptom": "pressure_drop",
133
+ "message": "Supply pressure below nominal"
134
+ },
135
+ {
136
+ "code": "M02-A112",
137
+ "machine_id": "M02",
138
+ "symptom": "reading_implausible",
139
+ "message": "Sensor plausibility check failed"
140
+ },
141
+ {
142
+ "code": "M02-A113",
143
+ "machine_id": "M02",
144
+ "symptom": "speed_unstable",
145
+ "message": "Output speed unstable"
146
+ },
147
+ {
148
+ "code": "M02-A114",
149
+ "machine_id": "M02",
150
+ "symptom": "temperature_high",
151
+ "message": "Temperature above warning threshold"
152
+ },
153
+ {
154
+ "code": "M02-A115",
155
+ "machine_id": "M02",
156
+ "symptom": "vibration_high",
157
+ "message": "Vibration level above ISO 10816 zone B"
158
+ },
159
+ {
160
+ "code": "M03-A116",
161
+ "machine_id": "M03",
162
+ "symptom": "noise",
163
+ "message": "Abnormal noise reported by operator"
164
+ },
165
+ {
166
+ "code": "M03-A117",
167
+ "machine_id": "M03",
168
+ "symptom": "overcurrent",
169
+ "message": "Motor overcurrent protection triggered"
170
+ },
171
+ {
172
+ "code": "M03-A118",
173
+ "machine_id": "M03",
174
+ "symptom": "signal_dropout",
175
+ "message": "Sensor signal intermittent"
176
+ },
177
+ {
178
+ "code": "M03-A119",
179
+ "machine_id": "M03",
180
+ "symptom": "speed_unstable",
181
+ "message": "Output speed unstable"
182
+ },
183
+ {
184
+ "code": "M03-A120",
185
+ "machine_id": "M03",
186
+ "symptom": "temperature_high",
187
+ "message": "Temperature above warning threshold"
188
+ },
189
+ {
190
+ "code": "M03-A121",
191
+ "machine_id": "M03",
192
+ "symptom": "vibration_high",
193
+ "message": "Vibration level above ISO 10816 zone B"
194
+ },
195
+ {
196
+ "code": "M04-A122",
197
+ "machine_id": "M04",
198
+ "symptom": "flow_low",
199
+ "message": "Flow rate below nominal"
200
+ },
201
+ {
202
+ "code": "M04-A123",
203
+ "machine_id": "M04",
204
+ "symptom": "noise",
205
+ "message": "Abnormal noise reported by operator"
206
+ },
207
+ {
208
+ "code": "M04-A124",
209
+ "machine_id": "M04",
210
+ "symptom": "reading_implausible",
211
+ "message": "Sensor plausibility check failed"
212
+ },
213
+ {
214
+ "code": "M04-A125",
215
+ "machine_id": "M04",
216
+ "symptom": "surface_finish_poor",
217
+ "message": "Quality check: surface finish out of spec"
218
+ },
219
+ {
220
+ "code": "M04-A126",
221
+ "machine_id": "M04",
222
+ "symptom": "temperature_high",
223
+ "message": "Temperature above warning threshold"
224
+ },
225
+ {
226
+ "code": "M04-A127",
227
+ "machine_id": "M04",
228
+ "symptom": "vibration_high",
229
+ "message": "Vibration level above ISO 10816 zone B"
230
+ },
231
+ {
232
+ "code": "M05-A128",
233
+ "machine_id": "M05",
234
+ "symptom": "cycle_slow",
235
+ "message": "Cycle time above nominal"
236
+ },
237
+ {
238
+ "code": "M05-A129",
239
+ "machine_id": "M05",
240
+ "symptom": "missed_detection",
241
+ "message": "Part detection failure"
242
+ },
243
+ {
244
+ "code": "M05-A130",
245
+ "machine_id": "M05",
246
+ "symptom": "noise",
247
+ "message": "Abnormal noise reported by operator"
248
+ },
249
+ {
250
+ "code": "M05-A131",
251
+ "machine_id": "M05",
252
+ "symptom": "position_error",
253
+ "message": "Servo following error"
254
+ },
255
+ {
256
+ "code": "M05-A132",
257
+ "machine_id": "M05",
258
+ "symptom": "pressure_drop",
259
+ "message": "Supply pressure below nominal"
260
+ },
261
+ {
262
+ "code": "M05-A133",
263
+ "machine_id": "M05",
264
+ "symptom": "vibration_high",
265
+ "message": "Vibration level above ISO 10816 zone B"
266
+ }
267
+ ],
268
+ "manuals": [
269
+ {
270
+ "machine_id": "M01",
271
+ "title": "Hydraulic Pump \u2014 Service Manual (excerpt)",
272
+ "sections": [
273
+ {
274
+ "heading": "Troubleshooting",
275
+ "rows": [
276
+ {
277
+ "symptom": "flow_low",
278
+ "possible_causes": [
279
+ "filter (clogging)"
280
+ ],
281
+ "note": "Confirm with logs before replacement."
282
+ },
283
+ {
284
+ "symptom": "noise",
285
+ "possible_causes": [
286
+ "bearing (lubrication_loss)"
287
+ ],
288
+ "note": "Confirm with logs before replacement."
289
+ },
290
+ {
291
+ "symptom": "overcurrent",
292
+ "possible_causes": [
293
+ "electric_motor (winding_fault)"
294
+ ],
295
+ "note": "Confirm with logs before replacement."
296
+ },
297
+ {
298
+ "symptom": "pressure_drop",
299
+ "possible_causes": [
300
+ "filter (clogging)"
301
+ ],
302
+ "note": "Confirm with logs before replacement."
303
+ },
304
+ {
305
+ "symptom": "pressure_oscillation",
306
+ "possible_causes": [
307
+ "hydraulic_valve (stiction)"
308
+ ],
309
+ "note": "Confirm with logs before replacement."
310
+ },
311
+ {
312
+ "symptom": "reading_implausible",
313
+ "possible_causes": [
314
+ "pressure_sensor (drift)"
315
+ ],
316
+ "note": "Confirm with logs before replacement."
317
+ },
318
+ {
319
+ "symptom": "temperature_high",
320
+ "possible_causes": [
321
+ "electric_motor (winding_fault)",
322
+ "bearing (wear)",
323
+ "bearing (lubrication_loss)",
324
+ "filter (clogging)"
325
+ ],
326
+ "note": "Confirm with logs before replacement."
327
+ },
328
+ {
329
+ "symptom": "vibration_high",
330
+ "possible_causes": [
331
+ "electric_motor (misalignment)",
332
+ "bearing (wear)"
333
+ ],
334
+ "note": "Confirm with logs before replacement."
335
+ }
336
+ ]
337
+ }
338
+ ]
339
+ },
340
+ {
341
+ "machine_id": "M02",
342
+ "title": "Air Compressor \u2014 Service Manual (excerpt)",
343
+ "sections": [
344
+ {
345
+ "heading": "Troubleshooting",
346
+ "rows": [
347
+ {
348
+ "symptom": "flow_low",
349
+ "possible_causes": [
350
+ "filter (clogging)"
351
+ ],
352
+ "note": "Confirm with logs before replacement."
353
+ },
354
+ {
355
+ "symptom": "noise",
356
+ "possible_causes": [
357
+ "bearing (lubrication_loss)",
358
+ "belt (slippage)"
359
+ ],
360
+ "note": "Confirm with logs before replacement."
361
+ },
362
+ {
363
+ "symptom": "overcurrent",
364
+ "possible_causes": [
365
+ "electric_motor (winding_fault)"
366
+ ],
367
+ "note": "Confirm with logs before replacement."
368
+ },
369
+ {
370
+ "symptom": "pressure_drop",
371
+ "possible_causes": [
372
+ "filter (clogging)"
373
+ ],
374
+ "note": "Confirm with logs before replacement."
375
+ },
376
+ {
377
+ "symptom": "reading_implausible",
378
+ "possible_causes": [
379
+ "temperature_sensor (drift)"
380
+ ],
381
+ "note": "Confirm with logs before replacement."
382
+ },
383
+ {
384
+ "symptom": "speed_unstable",
385
+ "possible_causes": [
386
+ "belt (slippage)"
387
+ ],
388
+ "note": "Confirm with logs before replacement."
389
+ },
390
+ {
391
+ "symptom": "temperature_high",
392
+ "possible_causes": [
393
+ "electric_motor (winding_fault)",
394
+ "bearing (wear)",
395
+ "bearing (lubrication_loss)",
396
+ "filter (clogging)"
397
+ ],
398
+ "note": "Confirm with logs before replacement."
399
+ },
400
+ {
401
+ "symptom": "vibration_high",
402
+ "possible_causes": [
403
+ "electric_motor (misalignment)",
404
+ "bearing (wear)"
405
+ ],
406
+ "note": "Confirm with logs before replacement."
407
+ }
408
+ ]
409
+ }
410
+ ]
411
+ },
412
+ {
413
+ "machine_id": "M03",
414
+ "title": "Conveyor \u2014 Service Manual (excerpt)",
415
+ "sections": [
416
+ {
417
+ "heading": "Troubleshooting",
418
+ "rows": [
419
+ {
420
+ "symptom": "noise",
421
+ "possible_causes": [
422
+ "gearbox (tooth_wear)",
423
+ "belt (slippage)"
424
+ ],
425
+ "note": "Confirm with logs before replacement."
426
+ },
427
+ {
428
+ "symptom": "overcurrent",
429
+ "possible_causes": [
430
+ "electric_motor (winding_fault)"
431
+ ],
432
+ "note": "Confirm with logs before replacement."
433
+ },
434
+ {
435
+ "symptom": "signal_dropout",
436
+ "possible_causes": [
437
+ "speed_sensor (intermittent)"
438
+ ],
439
+ "note": "Confirm with logs before replacement."
440
+ },
441
+ {
442
+ "symptom": "speed_unstable",
443
+ "possible_causes": [
444
+ "belt (slippage)"
445
+ ],
446
+ "note": "Confirm with logs before replacement."
447
+ },
448
+ {
449
+ "symptom": "temperature_high",
450
+ "possible_causes": [
451
+ "electric_motor (winding_fault)"
452
+ ],
453
+ "note": "Confirm with logs before replacement."
454
+ },
455
+ {
456
+ "symptom": "vibration_high",
457
+ "possible_causes": [
458
+ "electric_motor (misalignment)",
459
+ "gearbox (tooth_wear)"
460
+ ],
461
+ "note": "Confirm with logs before replacement."
462
+ }
463
+ ]
464
+ }
465
+ ]
466
+ },
467
+ {
468
+ "machine_id": "M04",
469
+ "title": "Cnc Mill \u2014 Service Manual (excerpt)",
470
+ "sections": [
471
+ {
472
+ "heading": "Troubleshooting",
473
+ "rows": [
474
+ {
475
+ "symptom": "flow_low",
476
+ "possible_causes": [
477
+ "coolant_pump (cavitation)"
478
+ ],
479
+ "note": "Confirm with logs before replacement."
480
+ },
481
+ {
482
+ "symptom": "noise",
483
+ "possible_causes": [
484
+ "bearing (lubrication_loss)",
485
+ "coolant_pump (cavitation)"
486
+ ],
487
+ "note": "Confirm with logs before replacement."
488
+ },
489
+ {
490
+ "symptom": "reading_implausible",
491
+ "possible_causes": [
492
+ "temperature_sensor (drift)"
493
+ ],
494
+ "note": "Confirm with logs before replacement."
495
+ },
496
+ {
497
+ "symptom": "surface_finish_poor",
498
+ "possible_causes": [
499
+ "spindle (imbalance)"
500
+ ],
501
+ "note": "Confirm with logs before replacement."
502
+ },
503
+ {
504
+ "symptom": "temperature_high",
505
+ "possible_causes": [
506
+ "bearing (wear)",
507
+ "bearing (lubrication_loss)"
508
+ ],
509
+ "note": "Confirm with logs before replacement."
510
+ },
511
+ {
512
+ "symptom": "vibration_high",
513
+ "possible_causes": [
514
+ "spindle (imbalance)",
515
+ "bearing (wear)"
516
+ ],
517
+ "note": "Confirm with logs before replacement."
518
+ }
519
+ ]
520
+ }
521
+ ]
522
+ },
523
+ {
524
+ "machine_id": "M05",
525
+ "title": "Packaging Robot \u2014 Service Manual (excerpt)",
526
+ "sections": [
527
+ {
528
+ "heading": "Troubleshooting",
529
+ "rows": [
530
+ {
531
+ "symptom": "cycle_slow",
532
+ "possible_causes": [
533
+ "pneumatic_valve (leak)"
534
+ ],
535
+ "note": "Confirm with logs before replacement."
536
+ },
537
+ {
538
+ "symptom": "missed_detection",
539
+ "possible_causes": [
540
+ "proximity_sensor (misadjustment)"
541
+ ],
542
+ "note": "Confirm with logs before replacement."
543
+ },
544
+ {
545
+ "symptom": "noise",
546
+ "possible_causes": [
547
+ "gearbox (tooth_wear)"
548
+ ],
549
+ "note": "Confirm with logs before replacement."
550
+ },
551
+ {
552
+ "symptom": "position_error",
553
+ "possible_causes": [
554
+ "servo_motor (encoder_fault)"
555
+ ],
556
+ "note": "Confirm with logs before replacement."
557
+ },
558
+ {
559
+ "symptom": "pressure_drop",
560
+ "possible_causes": [
561
+ "pneumatic_valve (leak)"
562
+ ],
563
+ "note": "Confirm with logs before replacement."
564
+ },
565
+ {
566
+ "symptom": "vibration_high",
567
+ "possible_causes": [
568
+ "gearbox (tooth_wear)"
569
+ ],
570
+ "note": "Confirm with logs before replacement."
571
+ }
572
+ ]
573
+ }
574
+ ]
575
+ }
576
+ ],
577
+ "maintenance_history": [
578
+ {
579
+ "machine_id": "M01",
580
+ "date": "2023-01-03",
581
+ "component": "electric_motor",
582
+ "action": "realign motor-load coupling"
583
+ },
584
+ {
585
+ "machine_id": "M01",
586
+ "date": "2025-10-01",
587
+ "component": "bearing",
588
+ "action": "replace bearing"
589
+ },
590
+ {
591
+ "machine_id": "M01",
592
+ "date": "2025-11-23",
593
+ "component": "filter",
594
+ "action": "replace filter element"
595
+ },
596
+ {
597
+ "machine_id": "M01",
598
+ "date": "2025-12-18",
599
+ "component": "bearing",
600
+ "action": "replace bearing"
601
+ },
602
+ {
603
+ "machine_id": "M02",
604
+ "date": "2023-04-25",
605
+ "component": "belt",
606
+ "action": "retension or replace belt"
607
+ },
608
+ {
609
+ "machine_id": "M02",
610
+ "date": "2023-07-04",
611
+ "component": "belt",
612
+ "action": "retension or replace belt"
613
+ },
614
+ {
615
+ "machine_id": "M02",
616
+ "date": "2023-08-19",
617
+ "component": "filter",
618
+ "action": "replace filter element"
619
+ },
620
+ {
621
+ "machine_id": "M02",
622
+ "date": "2023-12-14",
623
+ "component": "belt",
624
+ "action": "retension or replace belt"
625
+ },
626
+ {
627
+ "machine_id": "M03",
628
+ "date": "2025-02-02",
629
+ "component": "belt",
630
+ "action": "retension or replace belt"
631
+ },
632
+ {
633
+ "machine_id": "M03",
634
+ "date": "2025-02-13",
635
+ "component": "electric_motor",
636
+ "action": "realign motor-load coupling"
637
+ },
638
+ {
639
+ "machine_id": "M03",
640
+ "date": "2025-05-26",
641
+ "component": "belt",
642
+ "action": "retension or replace belt"
643
+ },
644
+ {
645
+ "machine_id": "M03",
646
+ "date": "2025-10-28",
647
+ "component": "electric_motor",
648
+ "action": "realign motor-load coupling"
649
+ },
650
+ {
651
+ "machine_id": "M04",
652
+ "date": "2023-04-28",
653
+ "component": "bearing",
654
+ "action": "relubricate and inspect seals"
655
+ },
656
+ {
657
+ "machine_id": "M04",
658
+ "date": "2024-06-07",
659
+ "component": "coolant_pump",
660
+ "action": "clear suction line, check coolant level"
661
+ },
662
+ {
663
+ "machine_id": "M04",
664
+ "date": "2024-08-21",
665
+ "component": "spindle",
666
+ "action": "balance spindle, check tool holder"
667
+ },
668
+ {
669
+ "machine_id": "M04",
670
+ "date": "2025-11-06",
671
+ "component": "coolant_pump",
672
+ "action": "clear suction line, check coolant level"
673
+ },
674
+ {
675
+ "machine_id": "M05",
676
+ "date": "2023-04-27",
677
+ "component": "gearbox",
678
+ "action": "inspect gears, replace worn stage"
679
+ },
680
+ {
681
+ "machine_id": "M05",
682
+ "date": "2023-11-16",
683
+ "component": "gearbox",
684
+ "action": "inspect gears, replace worn stage"
685
+ },
686
+ {
687
+ "machine_id": "M05",
688
+ "date": "2024-05-03",
689
+ "component": "servo_motor",
690
+ "action": "replace encoder"
691
+ },
692
+ {
693
+ "machine_id": "M05",
694
+ "date": "2024-07-09",
695
+ "component": "gearbox",
696
+ "action": "inspect gears, replace worn stage"
697
+ }
698
+ ]
699
+ }
longhaul-v0-standard/episodes.jsonl ADDED
The diff for this file is too large to render. See raw diff
 
longhaul-v0-standard/world.json ADDED
@@ -0,0 +1,699 @@
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1
+ {
2
+ "seed": 42,
3
+ "machines": [
4
+ {
5
+ "machine_id": "M01",
6
+ "machine_type": "hydraulic_pump",
7
+ "components": [
8
+ "electric_motor",
9
+ "bearing",
10
+ "hydraulic_valve",
11
+ "pressure_sensor",
12
+ "filter"
13
+ ],
14
+ "installed_year": 2011
15
+ },
16
+ {
17
+ "machine_id": "M02",
18
+ "machine_type": "air_compressor",
19
+ "components": [
20
+ "electric_motor",
21
+ "bearing",
22
+ "belt",
23
+ "temperature_sensor",
24
+ "filter"
25
+ ],
26
+ "installed_year": 2008
27
+ },
28
+ {
29
+ "machine_id": "M03",
30
+ "machine_type": "conveyor",
31
+ "components": [
32
+ "electric_motor",
33
+ "gearbox",
34
+ "belt",
35
+ "speed_sensor"
36
+ ],
37
+ "installed_year": 2016
38
+ },
39
+ {
40
+ "machine_id": "M04",
41
+ "machine_type": "cnc_mill",
42
+ "components": [
43
+ "spindle",
44
+ "bearing",
45
+ "coolant_pump",
46
+ "temperature_sensor"
47
+ ],
48
+ "installed_year": 2015
49
+ },
50
+ {
51
+ "machine_id": "M05",
52
+ "machine_type": "packaging_robot",
53
+ "components": [
54
+ "servo_motor",
55
+ "gearbox",
56
+ "proximity_sensor",
57
+ "pneumatic_valve"
58
+ ],
59
+ "installed_year": 2015
60
+ }
61
+ ],
62
+ "alarm_table": [
63
+ {
64
+ "code": "M01-A100",
65
+ "machine_id": "M01",
66
+ "symptom": "flow_low",
67
+ "message": "Flow rate below nominal"
68
+ },
69
+ {
70
+ "code": "M01-A101",
71
+ "machine_id": "M01",
72
+ "symptom": "noise",
73
+ "message": "Abnormal noise reported by operator"
74
+ },
75
+ {
76
+ "code": "M01-A102",
77
+ "machine_id": "M01",
78
+ "symptom": "overcurrent",
79
+ "message": "Motor overcurrent protection triggered"
80
+ },
81
+ {
82
+ "code": "M01-A103",
83
+ "machine_id": "M01",
84
+ "symptom": "pressure_drop",
85
+ "message": "Supply pressure below nominal"
86
+ },
87
+ {
88
+ "code": "M01-A104",
89
+ "machine_id": "M01",
90
+ "symptom": "pressure_oscillation",
91
+ "message": "Hydraulic pressure unstable"
92
+ },
93
+ {
94
+ "code": "M01-A105",
95
+ "machine_id": "M01",
96
+ "symptom": "reading_implausible",
97
+ "message": "Sensor plausibility check failed"
98
+ },
99
+ {
100
+ "code": "M01-A106",
101
+ "machine_id": "M01",
102
+ "symptom": "temperature_high",
103
+ "message": "Temperature above warning threshold"
104
+ },
105
+ {
106
+ "code": "M01-A107",
107
+ "machine_id": "M01",
108
+ "symptom": "vibration_high",
109
+ "message": "Vibration level above ISO 10816 zone B"
110
+ },
111
+ {
112
+ "code": "M02-A108",
113
+ "machine_id": "M02",
114
+ "symptom": "flow_low",
115
+ "message": "Flow rate below nominal"
116
+ },
117
+ {
118
+ "code": "M02-A109",
119
+ "machine_id": "M02",
120
+ "symptom": "noise",
121
+ "message": "Abnormal noise reported by operator"
122
+ },
123
+ {
124
+ "code": "M02-A110",
125
+ "machine_id": "M02",
126
+ "symptom": "overcurrent",
127
+ "message": "Motor overcurrent protection triggered"
128
+ },
129
+ {
130
+ "code": "M02-A111",
131
+ "machine_id": "M02",
132
+ "symptom": "pressure_drop",
133
+ "message": "Supply pressure below nominal"
134
+ },
135
+ {
136
+ "code": "M02-A112",
137
+ "machine_id": "M02",
138
+ "symptom": "reading_implausible",
139
+ "message": "Sensor plausibility check failed"
140
+ },
141
+ {
142
+ "code": "M02-A113",
143
+ "machine_id": "M02",
144
+ "symptom": "speed_unstable",
145
+ "message": "Output speed unstable"
146
+ },
147
+ {
148
+ "code": "M02-A114",
149
+ "machine_id": "M02",
150
+ "symptom": "temperature_high",
151
+ "message": "Temperature above warning threshold"
152
+ },
153
+ {
154
+ "code": "M02-A115",
155
+ "machine_id": "M02",
156
+ "symptom": "vibration_high",
157
+ "message": "Vibration level above ISO 10816 zone B"
158
+ },
159
+ {
160
+ "code": "M03-A116",
161
+ "machine_id": "M03",
162
+ "symptom": "noise",
163
+ "message": "Abnormal noise reported by operator"
164
+ },
165
+ {
166
+ "code": "M03-A117",
167
+ "machine_id": "M03",
168
+ "symptom": "overcurrent",
169
+ "message": "Motor overcurrent protection triggered"
170
+ },
171
+ {
172
+ "code": "M03-A118",
173
+ "machine_id": "M03",
174
+ "symptom": "signal_dropout",
175
+ "message": "Sensor signal intermittent"
176
+ },
177
+ {
178
+ "code": "M03-A119",
179
+ "machine_id": "M03",
180
+ "symptom": "speed_unstable",
181
+ "message": "Output speed unstable"
182
+ },
183
+ {
184
+ "code": "M03-A120",
185
+ "machine_id": "M03",
186
+ "symptom": "temperature_high",
187
+ "message": "Temperature above warning threshold"
188
+ },
189
+ {
190
+ "code": "M03-A121",
191
+ "machine_id": "M03",
192
+ "symptom": "vibration_high",
193
+ "message": "Vibration level above ISO 10816 zone B"
194
+ },
195
+ {
196
+ "code": "M04-A122",
197
+ "machine_id": "M04",
198
+ "symptom": "flow_low",
199
+ "message": "Flow rate below nominal"
200
+ },
201
+ {
202
+ "code": "M04-A123",
203
+ "machine_id": "M04",
204
+ "symptom": "noise",
205
+ "message": "Abnormal noise reported by operator"
206
+ },
207
+ {
208
+ "code": "M04-A124",
209
+ "machine_id": "M04",
210
+ "symptom": "reading_implausible",
211
+ "message": "Sensor plausibility check failed"
212
+ },
213
+ {
214
+ "code": "M04-A125",
215
+ "machine_id": "M04",
216
+ "symptom": "surface_finish_poor",
217
+ "message": "Quality check: surface finish out of spec"
218
+ },
219
+ {
220
+ "code": "M04-A126",
221
+ "machine_id": "M04",
222
+ "symptom": "temperature_high",
223
+ "message": "Temperature above warning threshold"
224
+ },
225
+ {
226
+ "code": "M04-A127",
227
+ "machine_id": "M04",
228
+ "symptom": "vibration_high",
229
+ "message": "Vibration level above ISO 10816 zone B"
230
+ },
231
+ {
232
+ "code": "M05-A128",
233
+ "machine_id": "M05",
234
+ "symptom": "cycle_slow",
235
+ "message": "Cycle time above nominal"
236
+ },
237
+ {
238
+ "code": "M05-A129",
239
+ "machine_id": "M05",
240
+ "symptom": "missed_detection",
241
+ "message": "Part detection failure"
242
+ },
243
+ {
244
+ "code": "M05-A130",
245
+ "machine_id": "M05",
246
+ "symptom": "noise",
247
+ "message": "Abnormal noise reported by operator"
248
+ },
249
+ {
250
+ "code": "M05-A131",
251
+ "machine_id": "M05",
252
+ "symptom": "position_error",
253
+ "message": "Servo following error"
254
+ },
255
+ {
256
+ "code": "M05-A132",
257
+ "machine_id": "M05",
258
+ "symptom": "pressure_drop",
259
+ "message": "Supply pressure below nominal"
260
+ },
261
+ {
262
+ "code": "M05-A133",
263
+ "machine_id": "M05",
264
+ "symptom": "vibration_high",
265
+ "message": "Vibration level above ISO 10816 zone B"
266
+ }
267
+ ],
268
+ "manuals": [
269
+ {
270
+ "machine_id": "M01",
271
+ "title": "Hydraulic Pump \u2014 Service Manual (excerpt)",
272
+ "sections": [
273
+ {
274
+ "heading": "Troubleshooting",
275
+ "rows": [
276
+ {
277
+ "symptom": "flow_low",
278
+ "possible_causes": [
279
+ "filter (clogging)"
280
+ ],
281
+ "note": "Confirm with logs before replacement."
282
+ },
283
+ {
284
+ "symptom": "noise",
285
+ "possible_causes": [
286
+ "bearing (lubrication_loss)"
287
+ ],
288
+ "note": "Confirm with logs before replacement."
289
+ },
290
+ {
291
+ "symptom": "overcurrent",
292
+ "possible_causes": [
293
+ "electric_motor (winding_fault)"
294
+ ],
295
+ "note": "Confirm with logs before replacement."
296
+ },
297
+ {
298
+ "symptom": "pressure_drop",
299
+ "possible_causes": [
300
+ "filter (clogging)"
301
+ ],
302
+ "note": "Confirm with logs before replacement."
303
+ },
304
+ {
305
+ "symptom": "pressure_oscillation",
306
+ "possible_causes": [
307
+ "hydraulic_valve (stiction)"
308
+ ],
309
+ "note": "Confirm with logs before replacement."
310
+ },
311
+ {
312
+ "symptom": "reading_implausible",
313
+ "possible_causes": [
314
+ "pressure_sensor (drift)"
315
+ ],
316
+ "note": "Confirm with logs before replacement."
317
+ },
318
+ {
319
+ "symptom": "temperature_high",
320
+ "possible_causes": [
321
+ "electric_motor (winding_fault)",
322
+ "bearing (wear)",
323
+ "bearing (lubrication_loss)",
324
+ "filter (clogging)"
325
+ ],
326
+ "note": "Confirm with logs before replacement."
327
+ },
328
+ {
329
+ "symptom": "vibration_high",
330
+ "possible_causes": [
331
+ "electric_motor (misalignment)",
332
+ "bearing (wear)"
333
+ ],
334
+ "note": "Confirm with logs before replacement."
335
+ }
336
+ ]
337
+ }
338
+ ]
339
+ },
340
+ {
341
+ "machine_id": "M02",
342
+ "title": "Air Compressor \u2014 Service Manual (excerpt)",
343
+ "sections": [
344
+ {
345
+ "heading": "Troubleshooting",
346
+ "rows": [
347
+ {
348
+ "symptom": "flow_low",
349
+ "possible_causes": [
350
+ "filter (clogging)"
351
+ ],
352
+ "note": "Confirm with logs before replacement."
353
+ },
354
+ {
355
+ "symptom": "noise",
356
+ "possible_causes": [
357
+ "bearing (lubrication_loss)",
358
+ "belt (slippage)"
359
+ ],
360
+ "note": "Confirm with logs before replacement."
361
+ },
362
+ {
363
+ "symptom": "overcurrent",
364
+ "possible_causes": [
365
+ "electric_motor (winding_fault)"
366
+ ],
367
+ "note": "Confirm with logs before replacement."
368
+ },
369
+ {
370
+ "symptom": "pressure_drop",
371
+ "possible_causes": [
372
+ "filter (clogging)"
373
+ ],
374
+ "note": "Confirm with logs before replacement."
375
+ },
376
+ {
377
+ "symptom": "reading_implausible",
378
+ "possible_causes": [
379
+ "temperature_sensor (drift)"
380
+ ],
381
+ "note": "Confirm with logs before replacement."
382
+ },
383
+ {
384
+ "symptom": "speed_unstable",
385
+ "possible_causes": [
386
+ "belt (slippage)"
387
+ ],
388
+ "note": "Confirm with logs before replacement."
389
+ },
390
+ {
391
+ "symptom": "temperature_high",
392
+ "possible_causes": [
393
+ "electric_motor (winding_fault)",
394
+ "bearing (wear)",
395
+ "bearing (lubrication_loss)",
396
+ "filter (clogging)"
397
+ ],
398
+ "note": "Confirm with logs before replacement."
399
+ },
400
+ {
401
+ "symptom": "vibration_high",
402
+ "possible_causes": [
403
+ "electric_motor (misalignment)",
404
+ "bearing (wear)"
405
+ ],
406
+ "note": "Confirm with logs before replacement."
407
+ }
408
+ ]
409
+ }
410
+ ]
411
+ },
412
+ {
413
+ "machine_id": "M03",
414
+ "title": "Conveyor \u2014 Service Manual (excerpt)",
415
+ "sections": [
416
+ {
417
+ "heading": "Troubleshooting",
418
+ "rows": [
419
+ {
420
+ "symptom": "noise",
421
+ "possible_causes": [
422
+ "gearbox (tooth_wear)",
423
+ "belt (slippage)"
424
+ ],
425
+ "note": "Confirm with logs before replacement."
426
+ },
427
+ {
428
+ "symptom": "overcurrent",
429
+ "possible_causes": [
430
+ "electric_motor (winding_fault)"
431
+ ],
432
+ "note": "Confirm with logs before replacement."
433
+ },
434
+ {
435
+ "symptom": "signal_dropout",
436
+ "possible_causes": [
437
+ "speed_sensor (intermittent)"
438
+ ],
439
+ "note": "Confirm with logs before replacement."
440
+ },
441
+ {
442
+ "symptom": "speed_unstable",
443
+ "possible_causes": [
444
+ "belt (slippage)"
445
+ ],
446
+ "note": "Confirm with logs before replacement."
447
+ },
448
+ {
449
+ "symptom": "temperature_high",
450
+ "possible_causes": [
451
+ "electric_motor (winding_fault)"
452
+ ],
453
+ "note": "Confirm with logs before replacement."
454
+ },
455
+ {
456
+ "symptom": "vibration_high",
457
+ "possible_causes": [
458
+ "electric_motor (misalignment)",
459
+ "gearbox (tooth_wear)"
460
+ ],
461
+ "note": "Confirm with logs before replacement."
462
+ }
463
+ ]
464
+ }
465
+ ]
466
+ },
467
+ {
468
+ "machine_id": "M04",
469
+ "title": "Cnc Mill \u2014 Service Manual (excerpt)",
470
+ "sections": [
471
+ {
472
+ "heading": "Troubleshooting",
473
+ "rows": [
474
+ {
475
+ "symptom": "flow_low",
476
+ "possible_causes": [
477
+ "coolant_pump (cavitation)"
478
+ ],
479
+ "note": "Confirm with logs before replacement."
480
+ },
481
+ {
482
+ "symptom": "noise",
483
+ "possible_causes": [
484
+ "bearing (lubrication_loss)",
485
+ "coolant_pump (cavitation)"
486
+ ],
487
+ "note": "Confirm with logs before replacement."
488
+ },
489
+ {
490
+ "symptom": "reading_implausible",
491
+ "possible_causes": [
492
+ "temperature_sensor (drift)"
493
+ ],
494
+ "note": "Confirm with logs before replacement."
495
+ },
496
+ {
497
+ "symptom": "surface_finish_poor",
498
+ "possible_causes": [
499
+ "spindle (imbalance)"
500
+ ],
501
+ "note": "Confirm with logs before replacement."
502
+ },
503
+ {
504
+ "symptom": "temperature_high",
505
+ "possible_causes": [
506
+ "bearing (wear)",
507
+ "bearing (lubrication_loss)"
508
+ ],
509
+ "note": "Confirm with logs before replacement."
510
+ },
511
+ {
512
+ "symptom": "vibration_high",
513
+ "possible_causes": [
514
+ "spindle (imbalance)",
515
+ "bearing (wear)"
516
+ ],
517
+ "note": "Confirm with logs before replacement."
518
+ }
519
+ ]
520
+ }
521
+ ]
522
+ },
523
+ {
524
+ "machine_id": "M05",
525
+ "title": "Packaging Robot \u2014 Service Manual (excerpt)",
526
+ "sections": [
527
+ {
528
+ "heading": "Troubleshooting",
529
+ "rows": [
530
+ {
531
+ "symptom": "cycle_slow",
532
+ "possible_causes": [
533
+ "pneumatic_valve (leak)"
534
+ ],
535
+ "note": "Confirm with logs before replacement."
536
+ },
537
+ {
538
+ "symptom": "missed_detection",
539
+ "possible_causes": [
540
+ "proximity_sensor (misadjustment)"
541
+ ],
542
+ "note": "Confirm with logs before replacement."
543
+ },
544
+ {
545
+ "symptom": "noise",
546
+ "possible_causes": [
547
+ "gearbox (tooth_wear)"
548
+ ],
549
+ "note": "Confirm with logs before replacement."
550
+ },
551
+ {
552
+ "symptom": "position_error",
553
+ "possible_causes": [
554
+ "servo_motor (encoder_fault)"
555
+ ],
556
+ "note": "Confirm with logs before replacement."
557
+ },
558
+ {
559
+ "symptom": "pressure_drop",
560
+ "possible_causes": [
561
+ "pneumatic_valve (leak)"
562
+ ],
563
+ "note": "Confirm with logs before replacement."
564
+ },
565
+ {
566
+ "symptom": "vibration_high",
567
+ "possible_causes": [
568
+ "gearbox (tooth_wear)"
569
+ ],
570
+ "note": "Confirm with logs before replacement."
571
+ }
572
+ ]
573
+ }
574
+ ]
575
+ }
576
+ ],
577
+ "maintenance_history": [
578
+ {
579
+ "machine_id": "M01",
580
+ "date": "2023-01-03",
581
+ "component": "electric_motor",
582
+ "action": "realign motor-load coupling"
583
+ },
584
+ {
585
+ "machine_id": "M01",
586
+ "date": "2025-10-01",
587
+ "component": "bearing",
588
+ "action": "replace bearing"
589
+ },
590
+ {
591
+ "machine_id": "M01",
592
+ "date": "2025-11-23",
593
+ "component": "filter",
594
+ "action": "replace filter element"
595
+ },
596
+ {
597
+ "machine_id": "M01",
598
+ "date": "2025-12-18",
599
+ "component": "bearing",
600
+ "action": "replace bearing"
601
+ },
602
+ {
603
+ "machine_id": "M02",
604
+ "date": "2023-04-25",
605
+ "component": "belt",
606
+ "action": "retension or replace belt"
607
+ },
608
+ {
609
+ "machine_id": "M02",
610
+ "date": "2023-07-04",
611
+ "component": "belt",
612
+ "action": "retension or replace belt"
613
+ },
614
+ {
615
+ "machine_id": "M02",
616
+ "date": "2023-08-19",
617
+ "component": "filter",
618
+ "action": "replace filter element"
619
+ },
620
+ {
621
+ "machine_id": "M02",
622
+ "date": "2023-12-14",
623
+ "component": "belt",
624
+ "action": "retension or replace belt"
625
+ },
626
+ {
627
+ "machine_id": "M03",
628
+ "date": "2025-02-02",
629
+ "component": "belt",
630
+ "action": "retension or replace belt"
631
+ },
632
+ {
633
+ "machine_id": "M03",
634
+ "date": "2025-02-13",
635
+ "component": "electric_motor",
636
+ "action": "realign motor-load coupling"
637
+ },
638
+ {
639
+ "machine_id": "M03",
640
+ "date": "2025-05-26",
641
+ "component": "belt",
642
+ "action": "retension or replace belt"
643
+ },
644
+ {
645
+ "machine_id": "M03",
646
+ "date": "2025-10-28",
647
+ "component": "electric_motor",
648
+ "action": "realign motor-load coupling"
649
+ },
650
+ {
651
+ "machine_id": "M04",
652
+ "date": "2023-04-28",
653
+ "component": "bearing",
654
+ "action": "relubricate and inspect seals"
655
+ },
656
+ {
657
+ "machine_id": "M04",
658
+ "date": "2024-06-07",
659
+ "component": "coolant_pump",
660
+ "action": "clear suction line, check coolant level"
661
+ },
662
+ {
663
+ "machine_id": "M04",
664
+ "date": "2024-08-21",
665
+ "component": "spindle",
666
+ "action": "balance spindle, check tool holder"
667
+ },
668
+ {
669
+ "machine_id": "M04",
670
+ "date": "2025-11-06",
671
+ "component": "coolant_pump",
672
+ "action": "clear suction line, check coolant level"
673
+ },
674
+ {
675
+ "machine_id": "M05",
676
+ "date": "2023-04-27",
677
+ "component": "gearbox",
678
+ "action": "inspect gears, replace worn stage"
679
+ },
680
+ {
681
+ "machine_id": "M05",
682
+ "date": "2023-11-16",
683
+ "component": "gearbox",
684
+ "action": "inspect gears, replace worn stage"
685
+ },
686
+ {
687
+ "machine_id": "M05",
688
+ "date": "2024-05-03",
689
+ "component": "servo_motor",
690
+ "action": "replace encoder"
691
+ },
692
+ {
693
+ "machine_id": "M05",
694
+ "date": "2024-07-09",
695
+ "component": "gearbox",
696
+ "action": "inspect gears, replace worn stage"
697
+ }
698
+ ]
699
+ }
longhaul-v1-standard/episodes.jsonl ADDED
The diff for this file is too large to render. See raw diff
 
longhaul-v1-standard/world.json ADDED
@@ -0,0 +1,699 @@
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1
+ {
2
+ "seed": 42,
3
+ "machines": [
4
+ {
5
+ "machine_id": "M01",
6
+ "machine_type": "hydraulic_pump",
7
+ "components": [
8
+ "electric_motor",
9
+ "bearing",
10
+ "hydraulic_valve",
11
+ "pressure_sensor",
12
+ "filter"
13
+ ],
14
+ "installed_year": 2011
15
+ },
16
+ {
17
+ "machine_id": "M02",
18
+ "machine_type": "air_compressor",
19
+ "components": [
20
+ "electric_motor",
21
+ "bearing",
22
+ "belt",
23
+ "temperature_sensor",
24
+ "filter"
25
+ ],
26
+ "installed_year": 2008
27
+ },
28
+ {
29
+ "machine_id": "M03",
30
+ "machine_type": "conveyor",
31
+ "components": [
32
+ "electric_motor",
33
+ "gearbox",
34
+ "belt",
35
+ "speed_sensor"
36
+ ],
37
+ "installed_year": 2016
38
+ },
39
+ {
40
+ "machine_id": "M04",
41
+ "machine_type": "cnc_mill",
42
+ "components": [
43
+ "spindle",
44
+ "bearing",
45
+ "coolant_pump",
46
+ "temperature_sensor"
47
+ ],
48
+ "installed_year": 2015
49
+ },
50
+ {
51
+ "machine_id": "M05",
52
+ "machine_type": "packaging_robot",
53
+ "components": [
54
+ "servo_motor",
55
+ "gearbox",
56
+ "proximity_sensor",
57
+ "pneumatic_valve"
58
+ ],
59
+ "installed_year": 2015
60
+ }
61
+ ],
62
+ "alarm_table": [
63
+ {
64
+ "code": "M01-A100",
65
+ "machine_id": "M01",
66
+ "symptom": "flow_low",
67
+ "message": "Flow rate below nominal"
68
+ },
69
+ {
70
+ "code": "M01-A101",
71
+ "machine_id": "M01",
72
+ "symptom": "noise",
73
+ "message": "Abnormal noise reported by operator"
74
+ },
75
+ {
76
+ "code": "M01-A102",
77
+ "machine_id": "M01",
78
+ "symptom": "overcurrent",
79
+ "message": "Motor overcurrent protection triggered"
80
+ },
81
+ {
82
+ "code": "M01-A103",
83
+ "machine_id": "M01",
84
+ "symptom": "pressure_drop",
85
+ "message": "Supply pressure below nominal"
86
+ },
87
+ {
88
+ "code": "M01-A104",
89
+ "machine_id": "M01",
90
+ "symptom": "pressure_oscillation",
91
+ "message": "Hydraulic pressure unstable"
92
+ },
93
+ {
94
+ "code": "M01-A105",
95
+ "machine_id": "M01",
96
+ "symptom": "reading_implausible",
97
+ "message": "Sensor plausibility check failed"
98
+ },
99
+ {
100
+ "code": "M01-A106",
101
+ "machine_id": "M01",
102
+ "symptom": "temperature_high",
103
+ "message": "Temperature above warning threshold"
104
+ },
105
+ {
106
+ "code": "M01-A107",
107
+ "machine_id": "M01",
108
+ "symptom": "vibration_high",
109
+ "message": "Vibration level above ISO 10816 zone B"
110
+ },
111
+ {
112
+ "code": "M02-A108",
113
+ "machine_id": "M02",
114
+ "symptom": "flow_low",
115
+ "message": "Flow rate below nominal"
116
+ },
117
+ {
118
+ "code": "M02-A109",
119
+ "machine_id": "M02",
120
+ "symptom": "noise",
121
+ "message": "Abnormal noise reported by operator"
122
+ },
123
+ {
124
+ "code": "M02-A110",
125
+ "machine_id": "M02",
126
+ "symptom": "overcurrent",
127
+ "message": "Motor overcurrent protection triggered"
128
+ },
129
+ {
130
+ "code": "M02-A111",
131
+ "machine_id": "M02",
132
+ "symptom": "pressure_drop",
133
+ "message": "Supply pressure below nominal"
134
+ },
135
+ {
136
+ "code": "M02-A112",
137
+ "machine_id": "M02",
138
+ "symptom": "reading_implausible",
139
+ "message": "Sensor plausibility check failed"
140
+ },
141
+ {
142
+ "code": "M02-A113",
143
+ "machine_id": "M02",
144
+ "symptom": "speed_unstable",
145
+ "message": "Output speed unstable"
146
+ },
147
+ {
148
+ "code": "M02-A114",
149
+ "machine_id": "M02",
150
+ "symptom": "temperature_high",
151
+ "message": "Temperature above warning threshold"
152
+ },
153
+ {
154
+ "code": "M02-A115",
155
+ "machine_id": "M02",
156
+ "symptom": "vibration_high",
157
+ "message": "Vibration level above ISO 10816 zone B"
158
+ },
159
+ {
160
+ "code": "M03-A116",
161
+ "machine_id": "M03",
162
+ "symptom": "noise",
163
+ "message": "Abnormal noise reported by operator"
164
+ },
165
+ {
166
+ "code": "M03-A117",
167
+ "machine_id": "M03",
168
+ "symptom": "overcurrent",
169
+ "message": "Motor overcurrent protection triggered"
170
+ },
171
+ {
172
+ "code": "M03-A118",
173
+ "machine_id": "M03",
174
+ "symptom": "signal_dropout",
175
+ "message": "Sensor signal intermittent"
176
+ },
177
+ {
178
+ "code": "M03-A119",
179
+ "machine_id": "M03",
180
+ "symptom": "speed_unstable",
181
+ "message": "Output speed unstable"
182
+ },
183
+ {
184
+ "code": "M03-A120",
185
+ "machine_id": "M03",
186
+ "symptom": "temperature_high",
187
+ "message": "Temperature above warning threshold"
188
+ },
189
+ {
190
+ "code": "M03-A121",
191
+ "machine_id": "M03",
192
+ "symptom": "vibration_high",
193
+ "message": "Vibration level above ISO 10816 zone B"
194
+ },
195
+ {
196
+ "code": "M04-A122",
197
+ "machine_id": "M04",
198
+ "symptom": "flow_low",
199
+ "message": "Flow rate below nominal"
200
+ },
201
+ {
202
+ "code": "M04-A123",
203
+ "machine_id": "M04",
204
+ "symptom": "noise",
205
+ "message": "Abnormal noise reported by operator"
206
+ },
207
+ {
208
+ "code": "M04-A124",
209
+ "machine_id": "M04",
210
+ "symptom": "reading_implausible",
211
+ "message": "Sensor plausibility check failed"
212
+ },
213
+ {
214
+ "code": "M04-A125",
215
+ "machine_id": "M04",
216
+ "symptom": "surface_finish_poor",
217
+ "message": "Quality check: surface finish out of spec"
218
+ },
219
+ {
220
+ "code": "M04-A126",
221
+ "machine_id": "M04",
222
+ "symptom": "temperature_high",
223
+ "message": "Temperature above warning threshold"
224
+ },
225
+ {
226
+ "code": "M04-A127",
227
+ "machine_id": "M04",
228
+ "symptom": "vibration_high",
229
+ "message": "Vibration level above ISO 10816 zone B"
230
+ },
231
+ {
232
+ "code": "M05-A128",
233
+ "machine_id": "M05",
234
+ "symptom": "cycle_slow",
235
+ "message": "Cycle time above nominal"
236
+ },
237
+ {
238
+ "code": "M05-A129",
239
+ "machine_id": "M05",
240
+ "symptom": "missed_detection",
241
+ "message": "Part detection failure"
242
+ },
243
+ {
244
+ "code": "M05-A130",
245
+ "machine_id": "M05",
246
+ "symptom": "noise",
247
+ "message": "Abnormal noise reported by operator"
248
+ },
249
+ {
250
+ "code": "M05-A131",
251
+ "machine_id": "M05",
252
+ "symptom": "position_error",
253
+ "message": "Servo following error"
254
+ },
255
+ {
256
+ "code": "M05-A132",
257
+ "machine_id": "M05",
258
+ "symptom": "pressure_drop",
259
+ "message": "Supply pressure below nominal"
260
+ },
261
+ {
262
+ "code": "M05-A133",
263
+ "machine_id": "M05",
264
+ "symptom": "vibration_high",
265
+ "message": "Vibration level above ISO 10816 zone B"
266
+ }
267
+ ],
268
+ "manuals": [
269
+ {
270
+ "machine_id": "M01",
271
+ "title": "Hydraulic Pump \u2014 Service Manual (excerpt)",
272
+ "sections": [
273
+ {
274
+ "heading": "Troubleshooting",
275
+ "rows": [
276
+ {
277
+ "symptom": "flow_low",
278
+ "possible_causes": [
279
+ "filter (clogging)"
280
+ ],
281
+ "note": "Confirm with logs before replacement."
282
+ },
283
+ {
284
+ "symptom": "noise",
285
+ "possible_causes": [
286
+ "bearing (lubrication_loss)"
287
+ ],
288
+ "note": "Confirm with logs before replacement."
289
+ },
290
+ {
291
+ "symptom": "overcurrent",
292
+ "possible_causes": [
293
+ "electric_motor (winding_fault)"
294
+ ],
295
+ "note": "Confirm with logs before replacement."
296
+ },
297
+ {
298
+ "symptom": "pressure_drop",
299
+ "possible_causes": [
300
+ "filter (clogging)"
301
+ ],
302
+ "note": "Confirm with logs before replacement."
303
+ },
304
+ {
305
+ "symptom": "pressure_oscillation",
306
+ "possible_causes": [
307
+ "hydraulic_valve (stiction)"
308
+ ],
309
+ "note": "Confirm with logs before replacement."
310
+ },
311
+ {
312
+ "symptom": "reading_implausible",
313
+ "possible_causes": [
314
+ "pressure_sensor (drift)"
315
+ ],
316
+ "note": "Confirm with logs before replacement."
317
+ },
318
+ {
319
+ "symptom": "temperature_high",
320
+ "possible_causes": [
321
+ "electric_motor (winding_fault)",
322
+ "bearing (wear)",
323
+ "bearing (lubrication_loss)",
324
+ "filter (clogging)"
325
+ ],
326
+ "note": "Confirm with logs before replacement."
327
+ },
328
+ {
329
+ "symptom": "vibration_high",
330
+ "possible_causes": [
331
+ "electric_motor (misalignment)",
332
+ "bearing (wear)"
333
+ ],
334
+ "note": "Confirm with logs before replacement."
335
+ }
336
+ ]
337
+ }
338
+ ]
339
+ },
340
+ {
341
+ "machine_id": "M02",
342
+ "title": "Air Compressor \u2014 Service Manual (excerpt)",
343
+ "sections": [
344
+ {
345
+ "heading": "Troubleshooting",
346
+ "rows": [
347
+ {
348
+ "symptom": "flow_low",
349
+ "possible_causes": [
350
+ "filter (clogging)"
351
+ ],
352
+ "note": "Confirm with logs before replacement."
353
+ },
354
+ {
355
+ "symptom": "noise",
356
+ "possible_causes": [
357
+ "bearing (lubrication_loss)",
358
+ "belt (slippage)"
359
+ ],
360
+ "note": "Confirm with logs before replacement."
361
+ },
362
+ {
363
+ "symptom": "overcurrent",
364
+ "possible_causes": [
365
+ "electric_motor (winding_fault)"
366
+ ],
367
+ "note": "Confirm with logs before replacement."
368
+ },
369
+ {
370
+ "symptom": "pressure_drop",
371
+ "possible_causes": [
372
+ "filter (clogging)"
373
+ ],
374
+ "note": "Confirm with logs before replacement."
375
+ },
376
+ {
377
+ "symptom": "reading_implausible",
378
+ "possible_causes": [
379
+ "temperature_sensor (drift)"
380
+ ],
381
+ "note": "Confirm with logs before replacement."
382
+ },
383
+ {
384
+ "symptom": "speed_unstable",
385
+ "possible_causes": [
386
+ "belt (slippage)"
387
+ ],
388
+ "note": "Confirm with logs before replacement."
389
+ },
390
+ {
391
+ "symptom": "temperature_high",
392
+ "possible_causes": [
393
+ "electric_motor (winding_fault)",
394
+ "bearing (wear)",
395
+ "bearing (lubrication_loss)",
396
+ "filter (clogging)"
397
+ ],
398
+ "note": "Confirm with logs before replacement."
399
+ },
400
+ {
401
+ "symptom": "vibration_high",
402
+ "possible_causes": [
403
+ "electric_motor (misalignment)",
404
+ "bearing (wear)"
405
+ ],
406
+ "note": "Confirm with logs before replacement."
407
+ }
408
+ ]
409
+ }
410
+ ]
411
+ },
412
+ {
413
+ "machine_id": "M03",
414
+ "title": "Conveyor \u2014 Service Manual (excerpt)",
415
+ "sections": [
416
+ {
417
+ "heading": "Troubleshooting",
418
+ "rows": [
419
+ {
420
+ "symptom": "noise",
421
+ "possible_causes": [
422
+ "gearbox (tooth_wear)",
423
+ "belt (slippage)"
424
+ ],
425
+ "note": "Confirm with logs before replacement."
426
+ },
427
+ {
428
+ "symptom": "overcurrent",
429
+ "possible_causes": [
430
+ "electric_motor (winding_fault)"
431
+ ],
432
+ "note": "Confirm with logs before replacement."
433
+ },
434
+ {
435
+ "symptom": "signal_dropout",
436
+ "possible_causes": [
437
+ "speed_sensor (intermittent)"
438
+ ],
439
+ "note": "Confirm with logs before replacement."
440
+ },
441
+ {
442
+ "symptom": "speed_unstable",
443
+ "possible_causes": [
444
+ "belt (slippage)"
445
+ ],
446
+ "note": "Confirm with logs before replacement."
447
+ },
448
+ {
449
+ "symptom": "temperature_high",
450
+ "possible_causes": [
451
+ "electric_motor (winding_fault)"
452
+ ],
453
+ "note": "Confirm with logs before replacement."
454
+ },
455
+ {
456
+ "symptom": "vibration_high",
457
+ "possible_causes": [
458
+ "electric_motor (misalignment)",
459
+ "gearbox (tooth_wear)"
460
+ ],
461
+ "note": "Confirm with logs before replacement."
462
+ }
463
+ ]
464
+ }
465
+ ]
466
+ },
467
+ {
468
+ "machine_id": "M04",
469
+ "title": "Cnc Mill \u2014 Service Manual (excerpt)",
470
+ "sections": [
471
+ {
472
+ "heading": "Troubleshooting",
473
+ "rows": [
474
+ {
475
+ "symptom": "flow_low",
476
+ "possible_causes": [
477
+ "coolant_pump (cavitation)"
478
+ ],
479
+ "note": "Confirm with logs before replacement."
480
+ },
481
+ {
482
+ "symptom": "noise",
483
+ "possible_causes": [
484
+ "bearing (lubrication_loss)",
485
+ "coolant_pump (cavitation)"
486
+ ],
487
+ "note": "Confirm with logs before replacement."
488
+ },
489
+ {
490
+ "symptom": "reading_implausible",
491
+ "possible_causes": [
492
+ "temperature_sensor (drift)"
493
+ ],
494
+ "note": "Confirm with logs before replacement."
495
+ },
496
+ {
497
+ "symptom": "surface_finish_poor",
498
+ "possible_causes": [
499
+ "spindle (imbalance)"
500
+ ],
501
+ "note": "Confirm with logs before replacement."
502
+ },
503
+ {
504
+ "symptom": "temperature_high",
505
+ "possible_causes": [
506
+ "bearing (wear)",
507
+ "bearing (lubrication_loss)"
508
+ ],
509
+ "note": "Confirm with logs before replacement."
510
+ },
511
+ {
512
+ "symptom": "vibration_high",
513
+ "possible_causes": [
514
+ "spindle (imbalance)",
515
+ "bearing (wear)"
516
+ ],
517
+ "note": "Confirm with logs before replacement."
518
+ }
519
+ ]
520
+ }
521
+ ]
522
+ },
523
+ {
524
+ "machine_id": "M05",
525
+ "title": "Packaging Robot \u2014 Service Manual (excerpt)",
526
+ "sections": [
527
+ {
528
+ "heading": "Troubleshooting",
529
+ "rows": [
530
+ {
531
+ "symptom": "cycle_slow",
532
+ "possible_causes": [
533
+ "pneumatic_valve (leak)"
534
+ ],
535
+ "note": "Confirm with logs before replacement."
536
+ },
537
+ {
538
+ "symptom": "missed_detection",
539
+ "possible_causes": [
540
+ "proximity_sensor (misadjustment)"
541
+ ],
542
+ "note": "Confirm with logs before replacement."
543
+ },
544
+ {
545
+ "symptom": "noise",
546
+ "possible_causes": [
547
+ "gearbox (tooth_wear)"
548
+ ],
549
+ "note": "Confirm with logs before replacement."
550
+ },
551
+ {
552
+ "symptom": "position_error",
553
+ "possible_causes": [
554
+ "servo_motor (encoder_fault)"
555
+ ],
556
+ "note": "Confirm with logs before replacement."
557
+ },
558
+ {
559
+ "symptom": "pressure_drop",
560
+ "possible_causes": [
561
+ "pneumatic_valve (leak)"
562
+ ],
563
+ "note": "Confirm with logs before replacement."
564
+ },
565
+ {
566
+ "symptom": "vibration_high",
567
+ "possible_causes": [
568
+ "gearbox (tooth_wear)"
569
+ ],
570
+ "note": "Confirm with logs before replacement."
571
+ }
572
+ ]
573
+ }
574
+ ]
575
+ }
576
+ ],
577
+ "maintenance_history": [
578
+ {
579
+ "machine_id": "M01",
580
+ "date": "2023-01-03",
581
+ "component": "electric_motor",
582
+ "action": "realign motor-load coupling"
583
+ },
584
+ {
585
+ "machine_id": "M01",
586
+ "date": "2025-10-01",
587
+ "component": "bearing",
588
+ "action": "replace bearing"
589
+ },
590
+ {
591
+ "machine_id": "M01",
592
+ "date": "2025-11-23",
593
+ "component": "filter",
594
+ "action": "replace filter element"
595
+ },
596
+ {
597
+ "machine_id": "M01",
598
+ "date": "2025-12-18",
599
+ "component": "bearing",
600
+ "action": "replace bearing"
601
+ },
602
+ {
603
+ "machine_id": "M02",
604
+ "date": "2023-04-25",
605
+ "component": "belt",
606
+ "action": "retension or replace belt"
607
+ },
608
+ {
609
+ "machine_id": "M02",
610
+ "date": "2023-07-04",
611
+ "component": "belt",
612
+ "action": "retension or replace belt"
613
+ },
614
+ {
615
+ "machine_id": "M02",
616
+ "date": "2023-08-19",
617
+ "component": "filter",
618
+ "action": "replace filter element"
619
+ },
620
+ {
621
+ "machine_id": "M02",
622
+ "date": "2023-12-14",
623
+ "component": "belt",
624
+ "action": "retension or replace belt"
625
+ },
626
+ {
627
+ "machine_id": "M03",
628
+ "date": "2025-02-02",
629
+ "component": "belt",
630
+ "action": "retension or replace belt"
631
+ },
632
+ {
633
+ "machine_id": "M03",
634
+ "date": "2025-02-13",
635
+ "component": "electric_motor",
636
+ "action": "realign motor-load coupling"
637
+ },
638
+ {
639
+ "machine_id": "M03",
640
+ "date": "2025-05-26",
641
+ "component": "belt",
642
+ "action": "retension or replace belt"
643
+ },
644
+ {
645
+ "machine_id": "M03",
646
+ "date": "2025-10-28",
647
+ "component": "electric_motor",
648
+ "action": "realign motor-load coupling"
649
+ },
650
+ {
651
+ "machine_id": "M04",
652
+ "date": "2023-04-28",
653
+ "component": "bearing",
654
+ "action": "relubricate and inspect seals"
655
+ },
656
+ {
657
+ "machine_id": "M04",
658
+ "date": "2024-06-07",
659
+ "component": "coolant_pump",
660
+ "action": "clear suction line, check coolant level"
661
+ },
662
+ {
663
+ "machine_id": "M04",
664
+ "date": "2024-08-21",
665
+ "component": "spindle",
666
+ "action": "balance spindle, check tool holder"
667
+ },
668
+ {
669
+ "machine_id": "M04",
670
+ "date": "2025-11-06",
671
+ "component": "coolant_pump",
672
+ "action": "clear suction line, check coolant level"
673
+ },
674
+ {
675
+ "machine_id": "M05",
676
+ "date": "2023-04-27",
677
+ "component": "gearbox",
678
+ "action": "inspect gears, replace worn stage"
679
+ },
680
+ {
681
+ "machine_id": "M05",
682
+ "date": "2023-11-16",
683
+ "component": "gearbox",
684
+ "action": "inspect gears, replace worn stage"
685
+ },
686
+ {
687
+ "machine_id": "M05",
688
+ "date": "2024-05-03",
689
+ "component": "servo_motor",
690
+ "action": "replace encoder"
691
+ },
692
+ {
693
+ "machine_id": "M05",
694
+ "date": "2024-07-09",
695
+ "component": "gearbox",
696
+ "action": "inspect gears, replace worn stage"
697
+ }
698
+ ]
699
+ }