id stringlengths 40 40 | instruction stringlengths 68 308 | input stringlengths 17 33.4k | output stringlengths 100 30k |
|---|---|---|---|
d616d3680264beb9a9d2c4fc681064b06f447eeb | Analyze and fix the following issue in the Linux kernel code: wifi: mt76: mt7921: do not support one stream on secondary antenna only | Problem Details:
mt7921 support following antenna combiantions only.
* primary + secondary (2x2)
* primary only (1x1)
Since we cannot work on secondary antenna only, return error if the
antenna bitmap is 0x2 in .set_antenna().
For example:
iw phy0 set antenna 3 3 /* valid */
iw phy0 set antenna 1 1 /* valid */... | ```diff
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 3b6adb29cbef..0e3ada1e008c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -1363,7 +1363,7 @@ mt7921_set_antenna(struct i... |
f39d499345dddb8382986fd5a2a0e84a63b1a6d5 | Analyze and fix the following issue in the Linux kernel code: wifi: mt76: mt7915: rework tx bytes counting when WED is active | Problem Details:
Concurrent binding/non-binding skbs could be handled anywhere which leads
to mixed byte counting, so switch to use PPDU TxS reporting regardless Tx
paths when WED is active.
Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com... | ```diff
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
index f6346a458978..3501f0503118 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mac.c
@@ -521,8 +521,6 @@ void mt76_con... |
161a7528e4074d104305fc109c16134b4990070e | Analyze and fix the following issue in the Linux kernel code: wifi: mt76: mt7915: rework tx packets counting when WED is active | Problem Details:
PPDU TxS can only report MPDU count whereas mac80211 requires MSDU scale
(NL80211_STA_INFO_TX_PACKETS), so switch to get MSDU counts from WA
statistic.
Note that mt7915 WA firmware only counts tx_packet for WED path, so driver
needs to take care of host path additionally.
Fixes: 43eaa3689507 ("wifi: ... | ```diff
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 6b07b8fafec2..0e9f4197213a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -277,7 +277,7 @@ struct mt76_sta_stats {
u64 tx_mcs[16]; /* mcs idx */
... |
9a3994077d170ec9ac75e800932b5671d9940cd2 | Analyze and fix the following issue in the Linux kernel code: wifi: mt76: mt7915: fix background radar event being blocked | Problem Details:
The background radar uses MT_RX_SEL2 as its band indication, so fix it.
Fixes: 7a53eecd5c87 (wifi: mt76: mt7915: check the correctness of event data)
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name... | ```diff
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 9fcb22fa1f97..088a065e37d5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -274,7 +274,7 @@ mt7915_mcu_rx_radar_detected(stru... |
c55b4e788f1dd6ca89cc97cf291d2a03b0b96de1 | Analyze and fix the following issue in the Linux kernel code: wifi: mt76: mt7996: fix header translation logic | Problem Details:
When header translation failure is indicated, the hardware will insert
an extra 2-byte field containing the data length after the protocol
type field. This happens either when the LLC-SNAP pattern did not match,
or if a VLAN header was detected.
The previous commit accidentally breaks the logic, so re... | ```diff
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
index 9b0f6053e0fa..25c5deb15d21 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mac.c
@@ -836,14 +836,19 @@ mt7996_mac_fill_rx(struct mt799... |
98c4d0abf5c478db1ad126ff0c187dbb84c0803c | Analyze and fix the following issue in the Linux kernel code: mt76: mt7921: don't assume adequate headroom for SDIO headers | Problem Details:
mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and
mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that
adequate headroom will be available in the passed skb. This assumption
typically is satisfied when the skb was allocated in the net core for
transmission via the mt79... | ```diff
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
index 1675bf520481..a671c601c583 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
@@ -1180,6 +1180,10 @@ int mt7921_usb_sdio_tx_prepare... |
39b1320e5dc2b707dfb5c25b0298ce9d4fc05aea | Analyze and fix the following issue in the Linux kernel code: drm/fb-helper: Remove unused inline function drm_fb_helper_defio_init() | Problem Details:
Since commit 8e86dee02253 ("drm/fb-helper: Remove drm_fb_helper_defio_init() and update docs")
this inline helper not used anymore.
Fixes: 8e86dee02253 ("drm/fb-helper: Remove drm_fb_helper_defio_init() and update docs")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Thomas Zimmermann ... | ```diff
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 4863b0f8299e..375737fd6c36 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -368,11 +368,6 @@ static inline void drm_fb_helper_deferred_io(struct fb_info *info,
{
}
-static inline int drm_fb_helper_defi... |
748c5ea8b8796ae8ee80b8d3a3d940570b588d59 | Analyze and fix the following issue in the Linux kernel code: serial: 8250_dw: Preserve original value of DLF register | Problem Details:
Preserve the original value of the Divisor Latch Fraction (DLF) register.
When the DLF register is modified without preservation, it can disrupt
the baudrate settings established by firmware or bootloader, leading to
data corruption and the generation of unreadable or distorted characters.
Fixes: 701c... | ```diff
diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
index 75f32f054ebb..84843e204a5e 100644
--- a/drivers/tty/serial/8250/8250_dwlib.c
+++ b/drivers/tty/serial/8250/8250_dwlib.c
@@ -244,7 +244,7 @@ void dw8250_setup_port(struct uart_port *p)
struct dw8250_port_data *pd = p... |
57c984f6fe20ebb9306d6e8c09b4f67fe63298c6 | Analyze and fix the following issue in the Linux kernel code: tty: serial: sh-sci: Fix sleeping in atomic context | Problem Details:
Fix sleeping in atomic context warning as reported by the Smatch static
checker tool by replacing disable_irq->disable_irq_nosync.
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 8749061be196 ("tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support")
Cc: stable@kernel.org
Signed-off-by: Bi... | ```diff
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7c9457962a3d..8b7a42e05d6d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -590,7 +590,7 @@ static void sci_start_tx(struct uart_port *port)
dma_submit_error(s->cookie_tx)) {
if (s->cfg->regtype =... |
9b8fef6345d5487137d4193bb0a0eae2203c284e | Analyze and fix the following issue in the Linux kernel code: serial: sifive: Fix sifive_serial_console_setup() section | Problem Details:
This function is called indirectly from the platform driver probe
function. Even if the driver is built in, it may be probed after
free_initmem() due to deferral or unbinding/binding via sysfs.
Thus the function cannot be marked as __init.
Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive U... | ```diff
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 1f565a216e74..a19db49327e2 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -811,7 +811,7 @@ static void sifive_serial_console_write(struct console *co, const char *s,
local_irq_restore(flags);
}
-stat... |
2bdfe84fbd57a4ed9fd65a67210442559ce078f0 | Analyze and fix the following issue in the Linux kernel code: arm64: dts: rockchip: Enable SATA on Radxa E25 | Problem Details:
The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
Enable sata1 node to fix use of SATA drives on the M.2 slot.
Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20230724145213.3833099-1-jo... | ```diff
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
index f0e4884438e3..72ad74c38a2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
@@ -99,6 +99,10 @@
};
};
+&combphy1 {
+ ... |
a87852e37f782257ebc57cc44a0d3fbf806471f6 | Analyze and fix the following issue in the Linux kernel code: arm64: dts: rockchip: Fix PCIe regulators on Radxa E25 | Problem Details:
Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
seen on page 8 of the schematic [1].
pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
vcc3v3_minipcie regulator is instead related to pcie30x1... | ```diff
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
index 63c4bd873188..f0e4884438e3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
@@ -47,6 +47,9 @@
vin-supply = <&vcc5v0_sy... |
18536cc8fab81f7bc010f782e06d34a1546d0648 | Analyze and fix the following issue in the Linux kernel code: serial: qcom-geni: clean up clock-rate debug printk | Problem Details:
Make the clock-rate debug printk more readable by using an equal sign
instead of a dash as separator between names and values and adding some
spaces:
qcom_geni_serial 988000.serial: desired_rate = 1843200, clk_rate = 7372800, clk_div = 4
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed... | ```diff
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 295dfba43904..f96fc8a8e67f 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1245,7 +1245,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport,
go... |
8ece7b754bc34ffd7fcc8269ccb9128e72ca76d8 | Analyze and fix the following issue in the Linux kernel code: serial: qcom-geni: fix opp vote on shutdown | Problem Details:
The operating-performance-point vote needs to be dropped when shutting
down the port to avoid wasting power by keeping resources like power
domains in an unnecessarily high performance state (e.g. when a UART
connected Bluetooth controller is not in use).
Fixes: a5819b548af0 ("tty: serial: qcom_geni_s... | ```diff
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index a1c8dcd781da..295dfba43904 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -125,6 +125,7 @@ struct qcom_geni_serial_port {
dma_addr_t rx_dma_addr;
bool setup;
... |
2554e6ba28a25f00cf1258d984a695e7ae391af2 | Analyze and fix the following issue in the Linux kernel code: 8250_men_mcb: Read num ports from register data. | Problem Details:
The IP Core Z025 and Z057 have a register where the amount of UART
ports is specified. Such register is located at offset 0x40.
This patch fixes the way the UART ports is calculated by reading
the actual register. Additionally a refactor was needed to achieve
this so we can keep track of the UART line... | ```diff
diff --git a/drivers/tty/serial/8250/8250_men_mcb.c b/drivers/tty/serial/8250/8250_men_mcb.c
index a2cdaeb61e00..d6cfebb3ee8f 100644
--- a/drivers/tty/serial/8250/8250_men_mcb.c
+++ b/drivers/tty/serial/8250/8250_men_mcb.c
@@ -12,11 +12,42 @@
#define MEN_UART_ID_Z057 0x39
#define MEN_UART_ID_Z125 0x7d
-#def... |
ad4484afe7de7869248b7c7a8e9722a62cb72bd0 | Analyze and fix the following issue in the Linux kernel code: serial: tegra: Don't print error on probe deferral | Problem Details:
If the Tegra serial driver is probe before clocks are available then the
following error is seen on boot:
serial-tegra 3100000.serial: Couldn't get the clock
This has been observed on Jetson AGX Orin. Fix this by calling
dev_err_probe() instead of dev_err() to avoid printing an error on probe
deferr... | ```diff
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 056ed1f957ab..f7f0841d60c9 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1589,10 +1589,8 @@ static int tegra_uart_probe(struct platform_device *pdev)
return PTR_ERR(u->membase... |
cfb81f2243b25a0d79accc6510ad66c5c5ad99ba | Analyze and fix the following issue in the Linux kernel code: spi: spi-qcom-qspi: Call dma_wmb() after setting up descriptors | Problem Details:
After setting up dma descriptors and before initiaiting dma transfer, call
dma_wmb() to ensure all writes go through.
This doesn't fix any reported problem but is added for safety.
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode... | ```diff
diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
index 67c101792a74..75fcb9145d91 100644
--- a/drivers/spi/spi-qcom-qspi.c
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -443,8 +443,10 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
ret = qcom_qspi_setup_dma_desc(ctrl, xfer);
... |
f7ba36d399c4558f36886adff9400be591b245f6 | Analyze and fix the following issue in the Linux kernel code: spi: spi-qcom-qspi: Use GFP_ATOMIC flag while allocating for descriptor | Problem Details:
While allocating for DMA descriptor, GFP_KERNEL flag is being used and
this allocation happens within critical section with spinlock acquired.
This generates a static checker warning.
Use GFP_ATOMIC to prevent sleeping; and since this increases chances of
allocation failure, add handling accordingly.
... | ```diff
diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
index 21a13605d3b0..67c101792a74 100644
--- a/drivers/spi/spi-qcom-qspi.c
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -308,9 +308,11 @@ static int qcom_qspi_alloc_desc(struct qcom_qspi *ctrl, dma_addr_t dma_ptr,
dma_addr_t dma_cmd_desc;
/* al... |
17aaf9ea07b656016316dc37716e987742b3e296 | Analyze and fix the following issue in the Linux kernel code: spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr | Problem Details:
During FIFO/DMA modes dynamic switching, only corresponding interrupts are
enabled. However its possible that FIFO related interrupt status registers
get set during DMA mode. For example WR_FIFO_EMPTY bit is set during DMA
TX.
Ignore such status bits so that they don't trip unwanted operations.
Sugge... | ```diff
diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
index a8a683d6145c..21a13605d3b0 100644
--- a/drivers/spi/spi-qcom-qspi.c
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -603,6 +603,9 @@ static irqreturn_t qcom_qspi_irq(int irq, void *dev_id)
int_status = readl(ctrl->base + MSTR_INT_STATUS);
wri... |
fc8e55f378cf11f3abe25ec5cd67b6fc5e915a96 | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: Use seq_puts() instead of seq_printf() | Problem Details:
For a constant format without additional arguments, use seq_puts()
instead of seq_printf(). Also, it fixes the following warning.
WARNING: Prefer seq_puts to seq_printf
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Block comments should align the * on each ... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
index ebeddc9a37e9..6aa3b1d845ab 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
@@ -62,7 +62,7 @@
* Returns 0 on success, error on failure.
*/
int amdgpu_ib_get(str... |
a0cc8e1512ad72c9f97cdcb76d42715730adaf62 | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: Update min() to min_t() in 'amdgpu_info_ioctl' | Problem Details:
Fixes the following:
WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));
And other style fixes:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations
Cc: Ch... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index 12f3c7ad7d04..631c5ab3f7dc 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -557,6 +557,7 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct ... |
ce83aa7bad8327830a1b907b4544e302ef09c2cf | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: Remove else after return in 'is_fru_eeprom_supported' | Problem Details:
Expressions under 'else' branch under case 'CHIP_SIENNA_CICHLID' in
function 'is_fru_eeprom_supported' are executed whenever the expression
in 'if' is False. Otherwise, return from case occurs. Therefore, there
is no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is not g... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
index c9f16eab0f3d..8c3ee042556a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fru_eeprom.c
@@ -83,11 +83,12 @@ static bool is_fru_eeprom_supported(s... |
53e1db06775ab433d9e66993b683274dd36e63d0 | Analyze and fix the following issue in the Linux kernel code: drm/amd/display: Remove else after return in 'dm_vblank_get_counter' & 'amdgpu_dm_backlight_get_level' | Problem Details:
Expressions under 'else' branch in function 'dm_vblank_get_counter' &
'amdgpu_dm_backlight_get_level' are executed whenever the expression in
'if' is False. Otherwise, return from function occurs. Therefore, there is
no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is no... | ```diff
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 70fd0a2e8bdb..d96b6eda3320 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -245,19 +245,20 @@ is_timing_unchanged_for... |
9bc12db4e2f62fe257ce02a8d4aa20e9c47fbe0e | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: fix the indexing issue during rlcg access ctrl init | Problem Details:
In case that the GET_INST() is used for looping, only loops for the
times of actual num of xcc, otherwise GET_INST() will return the invalid
index, a.k.a -1
And also remove the redundant mask checking in case of GET_INST()
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
index 9053435488c5..86a84a0970f0 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
@@ -1075,12 +1075,11 @@ static void gfx_v9_4_3_xcc_unset_safe_mode(struct amdgpu_devi... |
818c158fd4e43d07f29cb7eb1a6d0c06a881844f | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: add VISIBLE info in amdgpu_bo_print_info | Problem Details:
This allows tools to distinguish between VRAM and visible VRAM.
Use the opportunity to fix locking before accessing bo.
v2: squash in unused variable fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
index f7905bce0de1..88419927570a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
@@ -1575,23 +1575,31 @@ u64 amdgpu_bo_print_info(int id, struct amdgpu_bo... |
8923137dbe4b24863694c35284df51d036b5dd5e | Analyze and fix the following issue in the Linux kernel code: drm/amdkfd: avoid svm dump when dynamic debug disabled | Problem Details:
Set dynamic_svm_range_dump macro to avoid iterating over SVM lists
from svm_range_debug_dump when dynamic debug is disabled. Otherwise,
it could drop performance, specially with big number of SVM ranges.
Make sure both svm_range_set_attr and svm_range_debug_dump functions
are dynamically enabled to pri... | ```diff
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
index 479c4f66afa7..1b50eae051a4 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
@@ -46,6 +46,8 @@
* page table is updated.
*/
#define AMDGPU_SVM_RANGE_RETRY_FAULT_PENDING (... |
abbd6cfb1d5a95e8fd07d2fdaa0fe328c2948a52 | Analyze and fix the following issue in the Linux kernel code: drm/radeon: ERROR: "foo * bar" should be "foo *bar" | Problem Details:
Fix two occurrences of the checkpatch.pl error:
ERROR: "foo * bar" should be "foo *bar"
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | ```diff
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index 11a1940bb26d..93acb0e42bd6 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -68,8 +68,8 @@ typedef struct {
} atom_exec_context;
int atom_debug = 0;
-static int atom_execute_table_locked(struct ... |
de84de1eda9a10044bd4fe8245e1d7a2bbf52362 | Analyze and fix the following issue in the Linux kernel code: drm/amd: open brace '{' following struct go on the same line | Problem Details:
Fix the checkpatch error as open brace '{' following struct should
go on the same line.
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | ```diff
diff --git a/drivers/gpu/drm/amd/include/yellow_carp_offset.h b/drivers/gpu/drm/amd/include/yellow_carp_offset.h
index 0fea6a746611..a2c8dca2425e 100644
--- a/drivers/gpu/drm/amd/include/yellow_carp_offset.h
+++ b/drivers/gpu/drm/amd/include/yellow_carp_offset.h
@@ -7,13 +7,11 @@
#define MAX_SEGMENT ... |
8214b5b6f049235e7821d7a5918e29623da8b21d | Analyze and fix the following issue in the Linux kernel code: drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event() | Problem Details:
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: bb4fa525f327 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> | ```diff
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 1abdec14344e..943959012d04 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -7... |
8549655acbc7d295c7a3940afa8f60c575600f5a | Analyze and fix the following issue in the Linux kernel code: drm/amd/display: 3.2.244 | Problem Details:
This version brings along following fixes:
- Fix underflow issue on 175hz timing
- Add interface to modify DMUB panel power options
- Remove check for default eDP panel_mode
- Add new sequence for 4-lane HBR3 on vendor specific retimers
- Update DPG test pattern programming
- Correct unit conversion fo... | ```diff
diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h
index 41e68d694c17..eadb53853131 100644
--- a/drivers/gpu/drm/amd/display/dc/dc.h
+++ b/drivers/gpu/drm/amd/display/dc/dc.h
@@ -47,7 +47,7 @@ struct aux_payload;
struct set_config_cmd_payload;
struct dmub_notification;
-#... |
735688eb905db529efea0c78466fccc1461c3fde | Analyze and fix the following issue in the Linux kernel code: drm/amd/display: Fix underflow issue on 175hz timing | Problem Details:
[Why]
Screen underflows happen on 175hz timing for 3 plane overlay case.
[How]
Based on dst y prefetch value clamp to equ or oto for bandwidth
calculation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by:... | ```diff
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
index 890797ecf0f9..ecea008f19d3 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/display_mode_vba_util_32.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/... |
30953c4d000b6742eeb9cb248e737ecacf3a3b96 | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: Fix style issues in amdgpu_gem.c | Problem Details:
Fixes the following to align to linux coding style:
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations
ERROR: space prohibited before that close parenthesis ')'
WARNING: unnecessary whitespace before a quoted newline
WARNING: %LX is non-... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
index 74055cba3dc9..992dfd3de49c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -181,11 +181,10 @@ static int amdgpu_gem_object_open(struct drm_gem_object *obj,
... |
cbd0606e6a776bf2ba10d4a6957bb7628c0da947 | Analyze and fix the following issue in the Linux kernel code: drm/radeon: Prefer dev_* variant over printk | Problem Details:
Changed from pr_err/info to dev_* variants so that
we get better debug info when there are multiple GPUs
in the system.
Fixes: 09edeb4c1680 ("drm/radeon: Prefer pr_err/_info over printk")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deu... | ```diff
diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
index 595354e3ce0b..fb4d931fdf18 100644
--- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c
+++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c
@@ -94,6 +94,8 @@ static union acpi_object *radeon_atpx_call(acpi... |
8eb94c9b51412dab881211535afeda44d70d6136 | Analyze and fix the following issue in the Linux kernel code: drm/radeon: Fix style issues in radeon _encoders.c & _gart.c | Problem Details:
Conform to Linux kernel coding style.
Fixes the following & other checks in radeon_encoders.c & radeon_gart.c:
WARNING: Missing a blank line after declarations
WARNING: Block comments use * on subsequent lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessa... | ```diff
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index b3518a8f95a0..9cb6401fe97e 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -58,6 +58,7 @@ static uint32_t radeon_encoder_clones(struct drm_encoder *encod... |
93125cb704919f572c01e02ef64923caff1c3164 | Analyze and fix the following issue in the Linux kernel code: drm/amd/amdgpu: Fix warnings in amdgpu/amdgpu_display.c | Problem Details:
Fixes the below checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: suspect code indent for conditional statements (8, 12)
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index b702f499f5fb..d20dd3f852fc 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -124,7 +124,7 @@ static void amdgpu_display_flip_work_func(struct ... |
803d411b31f2b55268bce2f8463563ba9405baee | Analyze and fix the following issue in the Linux kernel code: drm/radeon: Avoid externs & do not initialize globals to 0 in radeon_drv.c | Problem Details:
Fixes the following:
- WARNING: externs should be avoided in .c files
- ERROR: do not initialise globals to 0
- WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivas... | ```diff
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index e4374814f0ef..aa02697e5ea3 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -113,59 +113,32 @@
#define KMS_DRIVER_MAJOR 2
#define KMS_DRIVER_MINOR 50
#define KMS_DRIVER_PA... |
88dd0b188e21d5cc303516b1d63217077a2d1120 | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: Fix do not add new typedefs in amdgpu_fw_attestation.c | Problem Details:
Fixes the following to align to coding style:
WARNING: do not add new typedefs
+typedef struct FW_ATT_DB_HEADER
WARNING: do not add new typedefs
+typedef struct FW_ATT_RECORD
WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
+ ... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c
index 2ca3c329de6d..2d4b67175b55 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fw_attestation.c
@@ -32,17 +32,15 @@
#include "soc15_comm... |
b25b3599264eec4f0af879f7e3b22c1cf38d0562 | Analyze and fix the following issue in the Linux kernel code: drm/amdgpu: Prefer #if IS_ENABLED over #if defined in amdgpu_drv.c | Problem Details:
Adhere to linux coding style
Fixes the following:
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || ... | ```diff
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index ae1369c01029..d944e4aa17c8 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -584,7 +584,7 @@ module_param_named(timeout_period, amdgpu_watchdog_timer.period, ... |
e29c3f81eb8904edb762ea450aa78f52e5044b31 | Analyze and fix the following issue in the Linux kernel code: Documentation: devices.txt: reconcile serial/ucc_uart minor numers | Problem Details:
Reconcile devices.txt with serial/ucc_uart.c regarding device number
assignments. ucc_uart.c supports 4 ports and uses minor devnums
46-49, so update devices.txt with that info.
Then update ucc_uart.c's reference to the location of the devices.txt
list in the kernel source tree.
Fixes: d7584ed2b994 ("... | ```diff
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 06c525e01ea5..b1b57f638b94 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -2691,7 +2691,7 @@
45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
46 = ... |
9b9c8195f3f0d74a826077fc1c01b9ee74907239 | Analyze and fix the following issue in the Linux kernel code: tty: n_gsm: fix UAF in gsm_cleanup_mux | Problem Details:
In gsm_cleanup_mux() the 'gsm->dlci' pointer was not cleaned properly,
leaving it a dangling pointer after gsm_dlci_release.
This leads to use-after-free where 'gsm->dlci[0]' are freed and accessed
by the subsequent gsm_cleanup_mux().
Such is the case in the following call trace:
<TASK>
__dump_stac... | ```diff
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index b411a26cc092..1cdefac4dd1b 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -3070,8 +3070,10 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
gsm->has_devices = false;
}
for (i = NUM_DLCI - 1; i >= 0; i--)
- if (gsm-... |
8362bf82fb5441613aac7c6c9dbb6b83def6ad3b | Analyze and fix the following issue in the Linux kernel code: Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe() | Problem Details:
Clang warns (or errors with CONFIG_WERROR=y):
drivers/input/keyboard/mcs_touchkey.c:149:49: error: variable 'error' is uninitialized when used here [-Werror,-Wuninitialized]
149 | dev_err(&client->dev, "i2c read error[%d]\n", error);
| ... | ```diff
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index f25e2b20e271..2410f676c7f9 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -146,7 +146,7 @@ static int mcs_touchkey_probe(struct i2c_client *client)
fw_ver = i2c... |
5bdeb6f5c7b94f653183f08eca8a08022b2efac6 | Analyze and fix the following issue in the Linux kernel code: Documentation: core-api: Drop :export: for int_log.h | Problem Details:
The :export: keyword makes sense only for C-files, where EXPORT_SYMBOL()
might appear. Otherwise kernel-doc may not produce anything out of this
file.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f97fa3dcb2db ("lib/math: Move dvb_math.c into lib/math/int_log.c")
Signed-off-by: Andy Shev... | ```diff
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index a526fbe06f86..ae92a2571388 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -166,7 +166,6 @@ Integer log and power Functions
-------------------------------
.. ke... |
7611c8ff152fe58585fc51bcf452ad4c089dc751 | Analyze and fix the following issue in the Linux kernel code: selftests:prctl: Fix make clean override warning | Problem Details:
Remove clean target in Makefile to fix the following warning
and use the one in common lib.mk
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:160: warning: ignoring old recipe for target 'clean'
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> | ```diff
diff --git a/tools/testing/selftests/prctl/Makefile b/tools/testing/selftests/prctl/Makefile
index cfc35d29fc2e..01dc90fbb509 100644
--- a/tools/testing/selftests/prctl/Makefile
+++ b/tools/testing/selftests/prctl/Makefile
@@ -10,7 +10,5 @@ all: $(TEST_PROGS)
include ../lib.mk
-clean:
- rm -fr $(TEST_PROGS... |
5eda42aebb7668b4dcff025cd3ccb0d3d7c53da6 | Analyze and fix the following issue in the Linux kernel code: usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host() | Problem Details:
The function mxs_phy_is_otg_host() will return true if OTG_ID_VALUE is
0 at USBPHY_CTRL register. However, OTG_ID_VALUE will not reflect the real
state if the ID pin is float, such as Host-only or Type-C cases. The value
of OTG_ID_VALUE is always 1 which means device mode.
This patch will fix the issue... | ```diff
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 50cf0003384a..6572b91702a5 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -388,14 +388,8 @@ static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
static bool mxs_phy_i... |
0497d34625167c0841d4828a28a26a10a2e9edde | Analyze and fix the following issue in the Linux kernel code: dt-bindings: usb: qcom,dwc3: correct SDM660 clocks | Problem Details:
SDM660 SoC has two instances of DWC3 USB controller: one supporting USB
3.0 and one supporting only up to USB 2.0. The latter one does not use
iface clock, so allow such variant to fix dtbs_check warnings:
sda660-inforce-ifc6560.dtb: usb@c2f8800: clocks: [[37, 48], [37, 88], [37, 89], [37, 90]] is ... | ```diff
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 33f299f0685d..67591057f234 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -283,15 +283,23 @@ allOf:
... |
36668515d56bf73f06765c71e08c8f7465f1e5c4 | Analyze and fix the following issue in the Linux kernel code: usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0 | Problem Details:
In current driver, the value of tuning parameter will not take effect
if samsung,picophy-* is assigned as 0. Because 0 is also a valid value
acccording to the description of USB_PHY_CFG1 register, this will improve
the logic to let it work.
Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung pic... | ```diff
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index aa2aebed8e2d..c251a4f34879 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -176,10 +176,12 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
if (of_... |
3eab3304ceea5857f5fff08d6e379c3177800ace | Analyze and fix the following issue in the Linux kernel code: usb: musb: Use read_poll_timeout() | Problem Details:
Use read_poll_timeout() instead of open coding it.
In the same time, fix the typo in the error message.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230710094645.42111-1-andriy.shevchenko@linu... | ```diff
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index cbc707fe570f..461587629bf2 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -21,6 +21,7 @@
#include <linux/usb.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/... |
1e4ab7b4c881cf26c1c72b3f56519e03475486fb | Analyze and fix the following issue in the Linux kernel code: dm cache policy smq: ensure IO doesn't prevent cleaner policy progress | Problem Details:
When using the cleaner policy to decommission the cache, there is
never any writeback started from the cache as it is constantly delayed
due to normal I/O keeping the device busy. Meaning @idle=false was
always being passed to clean_target_met()
Fix this by adding a specific 'cleaner' flag that is set... | ```diff
diff --git a/drivers/md/dm-cache-policy-smq.c b/drivers/md/dm-cache-policy-smq.c
index 493a8715dc8f..8bd2ad743d9a 100644
--- a/drivers/md/dm-cache-policy-smq.c
+++ b/drivers/md/dm-cache-policy-smq.c
@@ -857,7 +857,13 @@ struct smq_policy {
struct background_tracker *bg_work;
- bool migrations_allowed;
+ b... |
7d5fff8982a2199d49ec067818af7d84d4f95ca0 | Analyze and fix the following issue in the Linux kernel code: dm raid: protect md_stop() with 'reconfig_mutex' | Problem Details:
__md_stop_writes() and __md_stop() will modify many fields that are
protected by 'reconfig_mutex', and all the callers will grab
'reconfig_mutex' except for md_stop().
Also, update md_stop() to make certain 'reconfig_mutex' is held using
lockdep_assert_held().
Fixes: 9d09e663d550 ("dm: raid456 basic ... | ```diff
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 845b68c3fd5f..becdb689190e 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3298,8 +3298,8 @@ size_check:
return 0;
bad_unlock:
- mddev_unlock(&rs->md);
md_stop(&rs->md);
+ mddev_unlock(&rs->md);
bad:
raid_set_free(rs);
@... |
e74c874eabe2e9173a8fbdad616cd89c70eb8ffd | Analyze and fix the following issue in the Linux kernel code: dm raid: clean up four equivalent goto tags in raid_ctr() | Problem Details:
There are four equivalent goto tags in raid_ctr(), clean them up to
use just one.
There is no functional change and this is preparation to fix
raid_ctr()'s unprotected md_stop().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org> | ```diff
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 3d7366b912bf..845b68c3fd5f 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3251,8 +3251,7 @@ size_check:
r = md_start(&rs->md);
if (r) {
ti->error = "Failed to start raid array";
- mddev_unlock(&rs->md);
- goto bad_md_start... |
bae3028799dc4f1109acc4df37c8ff06f2d8f1a0 | Analyze and fix the following issue in the Linux kernel code: dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths | Problem Details:
In the error paths 'bad_stripe_cache' and 'bad_check_reshape',
'reconfig_mutex' is still held after raid_ctr() returns.
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org> | ```diff
diff --git a/drivers/md/dm-raid.c b/drivers/md/dm-raid.c
index 8846bf510a35..3d7366b912bf 100644
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -3271,15 +3271,19 @@ size_check:
/* Try to adjust the raid4/5/6 stripe cache size to the stripe size */
if (rs_is_raid456(rs)) {
r = rs_set_raid456_str... |
d4a3806bea61c8ef6e0103d0f39786e00586522e | Analyze and fix the following issue in the Linux kernel code: dm integrity: fix double free on memory allocation failure | Problem Details:
If the statement "recalc_tags = kvmalloc(recalc_tags_size, GFP_NOIO);"
fails, we call "vfree(recalc_buffer)" and we jump to the label "oom".
If the condition "recalc_sectors >= 1U << ic->sb->log2_sectors_per_block"
is false, we jump to the label "free_ret" and call "vfree(recalc_buffer)"
again, on an ... | ```diff
diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c
index 3d5c56e0a062..97a8d5fc9ebb 100644
--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -2676,6 +2676,7 @@ oom:
recalc_tags = kvmalloc(recalc_tags_size, GFP_NOIO);
if (!recalc_tags) {
vfree(recalc_buffer);
+ recalc_buf... |
2319b9c87fe243327285f2fefd7374ffd75a65fc | Analyze and fix the following issue in the Linux kernel code: usb: cdns3: Put the cdns set active part outside the spin lock | Problem Details:
The device may be scheduled during the resume process,
so this cannot appear in atomic operations. Since
pm_runtime_set_active will resume suppliers, put set
active outside the spin lock, which is only used to
protect the struct cdns data structure, otherwise the
kernel will report the following warnin... | ```diff
diff --git a/drivers/usb/cdns3/cdns3-plat.c b/drivers/usb/cdns3/cdns3-plat.c
index 884e2301237f..1168dbeed2ce 100644
--- a/drivers/usb/cdns3/cdns3-plat.c
+++ b/drivers/usb/cdns3/cdns3-plat.c
@@ -255,9 +255,10 @@ static int cdns3_controller_resume(struct device *dev, pm_message_t msg)
cdns3_set_platform_suspen... |
2627335a1329a0d39d8d277994678571c4f21800 | Analyze and fix the following issue in the Linux kernel code: usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config | Problem Details:
Previously, the cdns3_gadget_check_config() function in the cdns3 driver
mistakenly calculated the ep_buf_size by considering only one
configuration's endpoint information because "claimed" will be clear after
call usb_gadget_check_config().
The fix involves checking the private flags EP_CLAIMED inste... | ```diff
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index ea19253fd2d0..aa0111b365bb 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -3015,12 +3015,14 @@ static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
static int cdns3_gadget_chec... |
f4fc01af5b640bc39bd9403b5fd855345a2ad5f8 | Analyze and fix the following issue in the Linux kernel code: usb: gadget: call usb_gadget_check_config() to verify UDC capability | Problem Details:
The legacy gadget driver omitted calling usb_gadget_check_config()
to ensure that the USB device controller (UDC) has adequate resources,
including sufficient endpoint numbers and types, to support the given
configuration.
Previously, usb_add_config() was solely invoked by the legacy gadget
driver. Ad... | ```diff
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 1b3489149e5e..dd9b90481b4c 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1125,6 +1125,10 @@ int usb_add_config(struct usb_composite_dev *cdev,
goto done;
status = bind(config);
+
+ if... |
609fded3f91972ada551c141c5d04a71704f8967 | Analyze and fix the following issue in the Linux kernel code: usb: typec: Use sysfs_emit_at when concatenating the string | Problem Details:
The buffer address used in sysfs_emit should be aligned to PAGE_SIZE.
Use sysfs_emit_at instead to offset the buffer.
Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus ... | ```diff
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index e7312295f8c9..9c1dbf3c00e0 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1288,9 +1288,9 @@ static ssize_t select_usb_power_delivery_show(struct device *dev,
for (i = 0; pds[i]; i++) {
if (pds[i] == port-... |
4b642dc9829507e4afabc03d32a18abbdb192c5e | Analyze and fix the following issue in the Linux kernel code: usb: typec: Iterate pds array when showing the pd list | Problem Details:
The pointers of each usb_power_delivery handles are stored in "pds"
array returned from the pd_get ops but not in the adjacent memory
calculated from "pd". Get the handles from "pds" array directly instead
of deriving them from "pd".
Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for por... | ```diff
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index 3b30948bf4b0..e7312295f8c9 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1277,8 +1277,7 @@ static ssize_t select_usb_power_delivery_show(struct device *dev,
{
struct typec_port *port = to_typec_port(dev);
... |
b33ebb2415e7e0a55ee3d049c2890d3a3e3805b6 | Analyze and fix the following issue in the Linux kernel code: usb: typec: Set port->pd before adding device for typec_port | Problem Details:
When calling device_add in the registration of typec_port, it will do
the NULL check on usb_power_delivery handle in typec_port for the
visibility of the device attributes. It is always NULL because port->pd
is set in typec_port_set_usb_power_delivery which is later than the
device_add call.
Set port-... | ```diff
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index faa184ae3dac..3b30948bf4b0 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -2288,6 +2288,8 @@ struct typec_port *typec_register_port(struct device *parent,
return ERR_PTR(ret);
}
+ port->pd = cap->pd;
+
r... |
da6d91ed77062960107e2eddacd932abecfd0592 | Analyze and fix the following issue in the Linux kernel code: usb: typec: qcom: fix return value check in qcom_pmic_typec_probe() | Problem Details:
device_get_named_child_node() returns NULL, if it fails, replace
IS_ERR() with NULL pointer check.
Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Bryan O'Don... | ```diff
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
index a905160dd860..9b467a346114 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
@@ -209,8 +209,8 @@ static int qcom_pmic_typec_probe(struct p... |
a8291be6b5dd465c22af229483dbac543a91e24e | Analyze and fix the following issue in the Linux kernel code: Revert "usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()" | Problem Details:
This reverts commit f08aa7c80dac27ee00fa6827f447597d2fba5465.
The reverted commit was based on static analysis and a misunderstanding
of how PTR_ERR() and NULLs are supposed to work. When a function
returns both pointer errors and NULL then normally the NULL means
"continue operating without a featur... | ```diff
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index 83eaa65ddde3..df6028f7b273 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3718,15 +3718,15 @@ static int tegra_xudc_powerdomain_init(struct tegra_xudc *xudc)
int err;
... |
288b4fa1798e3637a9304c6e90a93d900e02369c | Analyze and fix the following issue in the Linux kernel code: Revert "usb: xhci: tegra: Fix error check" | Problem Details:
This reverts commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f.
The reverted commit was based on static analysis and a misunderstanding
of how PTR_ERR() and NULLs are supposed to work. When a function
returns both pointer errors and NULL then normally the NULL means
"continue operating without a featur... | ```diff
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 6ca8a37e53e1..4693d83351c6 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1145,15 +1145,15 @@ static int tegra_xusb_powerdomain_init(struct device *dev,
int err;
tegra->genpd_dev_host = dev... |
83e30f2bf86ef7c38fbd476ed81a88522b620628 | Analyze and fix the following issue in the Linux kernel code: USB: gadget: Fix the memory leak in raw_gadget driver | Problem Details:
Currently, increasing raw_dev->count happens before invoke the
raw_queue_event(), if the raw_queue_event() return error, invoke
raw_release() will not trigger the dev_free() to be called.
[ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event
[ 268.912053][ T5067] udc dummy_udc.0: failed... | ```diff
diff --git a/drivers/usb/gadget/legacy/raw_gadget.c b/drivers/usb/gadget/legacy/raw_gadget.c
index 2acece16b890..e549022642e5 100644
--- a/drivers/usb/gadget/legacy/raw_gadget.c
+++ b/drivers/usb/gadget/legacy/raw_gadget.c
@@ -310,13 +310,15 @@ static int gadget_bind(struct usb_gadget *gadget,
dev->eps_num = ... |
6237390644fb92b81f5262877fe545d0d2c7b5d7 | Analyze and fix the following issue in the Linux kernel code: usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activate | Problem Details:
Commit 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race")
introduced one extra mutex_unlock of connect_lock in the usb_gadget_active function.
Fixes: 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael... | ```diff
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 59188ea065e0..cd58f2a4e7f3 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -878,7 +878,6 @@ int usb_gadget_activate(struct usb_gadget *gadget)
*/
if (gadget->connected)
ret = usb_gadget_con... |
734ae15ab95a18d3d425fc9cb38b7a627d786f08 | Analyze and fix the following issue in the Linux kernel code: Revert "usb: dwc3: core: Enable AutoRetry feature in the controller" | Problem Details:
This reverts commit b138e23d3dff90c0494925b4c1874227b81bddf7.
AutoRetry has been found to sometimes cause controller freezes when
communicating with buggy USB devices.
This controller feature allows the controller in host mode to send
non-terminating/burst retry ACKs instead of terminating retry ACKs... | ```diff
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index e719e772f926..9c6bf054f15d 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1209,22 +1209,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
}
- if (dwc->dr_mode == USB_DR_MO... |
5bef4b3cb95a5b883dfec8b3ffc0d671323d55bb | Analyze and fix the following issue in the Linux kernel code: Revert "xhci: add quirk for host controllers that don't update endpoint DCS" | Problem Details:
This reverts commit 5255660b208aebfdb71d574f3952cf48392f4306.
This quirk breaks at least the following hardware:
0b:00.0 0c03: 1106:3483 (rev 01) (prog-if 30 [XHCI])
Subsystem: 1106:3483
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisIN... | ```diff
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c6742bae41c0..b9ae5c2a2527 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -479,10 +479,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == 0x3432)
xhci->quir... |
9dc162e22387080e2d06de708b89920c0e158c9a | Analyze and fix the following issue in the Linux kernel code: USB: quirks: add quirk for Focusrite Scarlett | Problem Details:
The Focusrite Scarlett audio device does not behave correctly during
resumes. Below is what happens during every resume (captured with
Beagle 5000):
<Suspend>
<Resume>
<Reset>/<Chirp J>/<Tiny J>
<Reset/Target disconnected>
<High Speed>
The Scarlett disconnects and is enumerated again.
However from t... | ```diff
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 934b3d997702..15e9bd180a1d 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -436,6 +436,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* novation SoundControl XL */
{ USB_DEVICE(0x1235, 0x0061), ... |
9fd10829a9eb482e192a845675ecc5480e0bfa10 | Analyze and fix the following issue in the Linux kernel code: usb: xhci-mtk: set the dma max_seg_size | Problem Details:
Allow devices to have dma operations beyond 64K, and avoid warnings such
as:
DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536]
Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Cc: stable <stable@kernel.org>
Tested-b... | ```diff
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 51d9d4d4f6a5..bbdf1b0b7be1 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -586,6 +586,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
}
device_init_wakeup(dev, true);
+ dma_set_max_seg_... |
e835c0a4e23c38531dcee5ef77e8d1cf462658c7 | Analyze and fix the following issue in the Linux kernel code: usb: dwc3: don't reset device side if dwc3 was configured as host-only | Problem Details:
Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on
system_suspend in host mode") replaces check for HOST only dr_mode with
current_dr_role. But during booting, the current_dr_role isn't
initialized, thus the device side reset is always issued even if dwc3
was configured as host-only. What's ... | ```diff
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f6689b731718..e719e772f926 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -277,9 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
/*
* We're resetting only the device side because, if we're in host mode,
* XH... |
71c47ad8920ef19d6545202191252a50c03aca30 | Analyze and fix the following issue in the Linux kernel code: usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ucsi_unregister_partner() | Problem Details:
It's better to set TYPEC_STATE_SAFE mode from ucsi_unregister_partner()
instead of ucsi_partner_change(), ucsi_unregister_partner() is always
when the partner disconnects.
Fixes: 25a2bc21c863 ("usb: typec: ucsi: call typec_set_mode on non-altmode partner change")
Suggested-by: Heikki Krogerus <heikki.... | ```diff
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 9b6d6b14431f..f6901319639d 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -785,6 +785,8 @@ static void ucsi_unregister_partner(struct ucsi_connector *con)
if (!con->partner)
return;
+ typec... |
c55afcbeaa7a6f4fffdbc999a9bf3f0b29a5186f | Analyze and fix the following issue in the Linux kernel code: usb: ohci-at91: Fix the unhandle interrupt when resume | Problem Details:
The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when
suspend which will let the ohci_irq() skip the interrupt after resume. And
nobody to handle this interrupt.
According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset
when resume from suspend(MEM) to fix by setti... | ```diff
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b9ce8d80f20b..b805c4b52ac3 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -672,7 +672,13 @@ ohci_hcd_at91_drv_resume(struct device *dev)
else
at91_start_clock(ohci_at91);
- ohci_resume(hcd, fal... |
0d8f7cc8057890db08c54fe610d8a94af59da082 | Analyze and fix the following issue in the Linux kernel code: xenbus: check xen_domain in xenbus_probe_initcall | Problem Details:
The same way we already do in xenbus_init.
Fixes the following warning:
[ 352.175563] Trying to free already-free IRQ 0
[ 352.177355] WARNING: CPU: 1 PID: 88 at kernel/irq/manage.c:1893 free_irq+0xbf/0x350
[...]
[ 352.213951] Call Trace:
[ 352.214390] <TASK>
[ 352.214717] ? __warn+0x81/0x170
[ ... | ```diff
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 58b732dcbfb8..639bf628389b 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -811,6 +811,9 @@ static int xenbus_probe_thread(void *unused)
static int __init xenbus_probe_initcall(v... |
dcce94b80a954a8968ff29fafcfb066d6197fa9a | Analyze and fix the following issue in the Linux kernel code: wifi: mwifiex: fix fortify warning | Problem Details:
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3,
inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless... | ```diff
diff --git a/drivers/net/wireless/marvell/mwifiex/tdls.c b/drivers/net/wireless/marvell/mwifiex/tdls.c
index 97bb87c3676b..6c60621b6ccc 100644
--- a/drivers/net/wireless/marvell/mwifiex/tdls.c
+++ b/drivers/net/wireless/marvell/mwifiex/tdls.c
@@ -735,6 +735,7 @@ mwifiex_construct_tdls_action_frame(struct mwifie... |
0bd66784274a287beada2933c2c0fa3a0ddae0d7 | Analyze and fix the following issue in the Linux kernel code: hwmon: (pmbus_core) Fix NULL pointer dereference | Problem Details:
Pass i2c_client to _pmbus_is_enabled to drop the assumption
that a regulator device is passed in.
This will fix the issue of a NULL pointer dereference when called from
_pmbus_get_flags.
Fixes: df5f6b6af01c ("hwmon: (pmbus/core) Generalise pmbus get status")
Cc: stable@vger.kernel.org # v6.4
Signed-o... | ```diff
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 42fb7286805b..30aeb59062a5 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2745,9 +2745,8 @@ static const struct pmbus_status_category __maybe_unused pmbus_status_flag_map[]
},
};
... |
55aab08f1856894d7d47d0ee23abbb4bc4854345 | Analyze and fix the following issue in the Linux kernel code: hwmon: (pmbus_core) Fix pmbus_is_enabled() | Problem Details:
Refactor pmbus_is_enabled() to return the status without any additional
processing as it is already done in _pmbus_is_enabled().
Fixes: df5f6b6af01c ("hwmon: (pmbus/core) Generalise pmbus get status")
Cc: stable@vger.kernel.org # v6.4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Sign... | ```diff
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index fa06325f5a7c..42fb7286805b 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2768,7 +2768,7 @@ static int __maybe_unused pmbus_is_enabled(struct device *dev, u8 page)
ret = _pmbus_is_e... |
f4123975cf341fd12121e1631c4b172a190f48d4 | Analyze and fix the following issue in the Linux kernel code: selftests/resctrl: Improve parameter consistency in fill_buf | Problem Details:
fill_buf's arguments can be improved in multiple ways:
- Multiple functions in fill_buf have start_ptr as one of their
argument which is a bit long and the extra "start" is pretty
obvious when it comes to pointers.
- Some of the functions take end_ptr and others size_t to indicate
the... | ```diff
diff --git a/tools/testing/selftests/resctrl/fill_buf.c b/tools/testing/selftests/resctrl/fill_buf.c
index a5ec9c82a960..5f16c4f5dfbf 100644
--- a/tools/testing/selftests/resctrl/fill_buf.c
+++ b/tools/testing/selftests/resctrl/fill_buf.c
@@ -38,32 +38,32 @@ static void cl_flush(void *p)
#endif
}
-static vo... |
326baed260e2e4f2df18d42d41b261740c6b8c04 | Analyze and fix the following issue in the Linux kernel code: selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf() | Problem Details:
run_fill_buf()'s malloc_and_init_memory parameter is always 1. There's
also duplicated memory init code for malloc_and_init_memory == 0 case
in fill_buf() which is unused.
Remove the malloc_and_init_memory parameter and the duplicated mem init
code.
While at it, fix also a typo in run_fill_buf() prot... | ```diff
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
index 53df66814cd6..63b551c44f1d 100644
--- a/tools/testing/selftests/resctrl/cache.c
+++ b/tools/testing/selftests/resctrl/cache.c
@@ -210,7 +210,7 @@ int measure_cache_vals(struct resctrl_val_param *param, int bm_pi... |
caddc0fbe4958a84b0dcd257439e9090c8fbfb8e | Analyze and fix the following issue in the Linux kernel code: selftests/resctrl: Move resctrl FS mount/umount to higher level | Problem Details:
A few places currently lack umounting resctrl FS on error paths:
- cmt_resctrl_val() has multiple error paths with direct return.
- cat_perf_miss_val() has multiple error paths with direct return.
In addition, validate_resctrl_feature_request() is called by
run_mbm_test() and run_mba_test(). Neithe... | ```diff
diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
index fb1443f888c4..e1c071dec1b0 100644
--- a/tools/testing/selftests/resctrl/cat_test.c
+++ b/tools/testing/selftests/resctrl/cat_test.c
@@ -106,10 +106,6 @@ int cat_perf_miss_val(int cpu_no, int n, char *cache... |
51a0c3b7f028169e40db930575dd01fe81c3e765 | Analyze and fix the following issue in the Linux kernel code: selftests/resctrl: Close perf value read fd on errors | Problem Details:
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error.
Close fd_lm only in cat_val() to make it easier to track it is always
closed.
Fixes: 790bf585b0ee ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
T... | ```diff
diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
index 8a4fe8693be6..289b619116fe 100644
--- a/tools/testing/selftests/resctrl/cache.c
+++ b/tools/testing/selftests/resctrl/cache.c
@@ -87,21 +87,19 @@ static int reset_enable_llc_perf(pid_t pid, int cpu_no)
static i... |
f99e413eb54652e2436cc56d081176bc9a34cd8d | Analyze and fix the following issue in the Linux kernel code: selftests/resctrl: Unmount resctrl FS if child fails to run benchmark | Problem Details:
A child calls PARENT_EXIT() when it fails to run a benchmark to kill
the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and
the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
Fixes: 591a6e8588fc ("selftests/resctrl: A... | ```diff
diff --git a/tools/testing/selftests/resctrl/resctrl.h b/tools/testing/selftests/resctrl/resctrl.h
index 87e39456dee0..f455f0b7e314 100644
--- a/tools/testing/selftests/resctrl/resctrl.h
+++ b/tools/testing/selftests/resctrl/resctrl.h
@@ -43,6 +43,7 @@
do { \
perror(err_msg); \
kill(ppid, SIGKILL);... |
2d320b1029ee7329ee0638181be967789775b962 | Analyze and fix the following issue in the Linux kernel code: selftests/resctrl: Don't leak buffer in fill_cache() | Problem Details:
The error path in fill_cache() does return before the allocated buffer
is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors
in commit c7b607fa9325 ("selftests/resctrl: Fix null pointer
dereference on open failed"), before that both fill functions always
... | ```diff
diff --git a/tools/testing/selftests/resctrl/fill_buf.c b/tools/testing/selftests/resctrl/fill_buf.c
index 341cc93ca84c..3b328c844896 100644
--- a/tools/testing/selftests/resctrl/fill_buf.c
+++ b/tools/testing/selftests/resctrl/fill_buf.c
@@ -177,12 +177,13 @@ fill_cache(unsigned long long buf_size, int malloc_... |
8e289f4542890168705219e54f0231dccfabddbe | Analyze and fix the following issue in the Linux kernel code: selftests/resctrl: Add resctrl.h into build deps | Problem Details:
Makefile only lists *.c as build dependencies for the resctrl_tests
executable which excludes resctrl.h.
Add *.h to wildcard() to include resctrl.h.
Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com... | ```diff
diff --git a/tools/testing/selftests/resctrl/Makefile b/tools/testing/selftests/resctrl/Makefile
index 73d53257df42..5073dbc96125 100644
--- a/tools/testing/selftests/resctrl/Makefile
+++ b/tools/testing/selftests/resctrl/Makefile
@@ -7,4 +7,4 @@ TEST_GEN_PROGS := resctrl_tests
include ../lib.mk
-$(OUTPUT)... |
2d59478308685f95346e2289c2dc519d8d8ecc48 | Analyze and fix the following issue in the Linux kernel code: wifi: zd1211rw: fix typo "tranmits" | Problem Details:
Spell "transmits" properly.
Found by searching for keyword "tranm".
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230622012627.15050-4-shamrocklee@posteo.net | ```diff
diff --git a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
index 850c26bc9524..8505d84eeed6 100644
--- a/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zydas/zd1211rw/zd_usb.c
@@ -1006,7 +1006,7 @@ resubmit:
* @usb: the zd1211rw-private US... |
59b4cc439f184c5eaa34161ec67af1e16ffabed4 | Analyze and fix the following issue in the Linux kernel code: wifi: rtw89: debug: Fix error handling in rtw89_debug_priv_btc_manual_set() | Problem Details:
If there is a failure during kstrtobool_from_user()
rtw89_debug_priv_btc_manual_set should return a negative error code
instead of returning the count directly.
Fix this bug by returning an error code instead of a count after
a failed call of the function "kstrtobool_from_user". Moreover
I omitted the... | ```diff
diff --git a/drivers/net/wireless/realtek/rtw89/debug.c b/drivers/net/wireless/realtek/rtw89/debug.c
index a4bbac916e22..ce5a9ac08145 100644
--- a/drivers/net/wireless/realtek/rtw89/debug.c
+++ b/drivers/net/wireless/realtek/rtw89/debug.c
@@ -3193,12 +3193,14 @@ static ssize_t rtw89_debug_priv_btc_manual_set(st... |
634fcbcaa4062db39aeb5ac6ed1bc1feb8dd5216 | Analyze and fix the following issue in the Linux kernel code: wifi: rtw88: delete timer and free skb queue when unloading | Problem Details:
Fix possible crash and memory leak on driver unload by deleting
TX purge timer and freeing C2H queue in 'rtw_core_deinit()',
shrink critical section in the latter by freeing COEX queue
out of TX report lock scope.
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Dmitry Antipov <dmantipov@... | ```diff
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index c853e2f2d448..c2ddb4d382af 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -2183,10 +2183,12 @@ void rtw_core_deinit(struct rtw_dev *rtwdev)
relea... |
c21733754cd6ecbca346f2adf9b17d4cfa50504f | Analyze and fix the following issue in the Linux kernel code: platform/x86: huawei-wmi: Silence ambient light sensor | Problem Details:
Currently huawei-wmi causes a lot of spam in dmesg on my
Huawei MateBook X Pro 2022:
...
[36409.328463] input input9: Unknown key pressed, code: 0x02c1
[36411.335104] input input9: Unknown key pressed, code: 0x02c1
[36412.338674] input input9: Unknown key pressed, code: 0x02c1
[36414.848564]... | ```diff
diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c
index 70e5c4c0574d..0ef1c46b617b 100644
--- a/drivers/platform/x86/huawei-wmi.c
+++ b/drivers/platform/x86/huawei-wmi.c
@@ -85,6 +85,8 @@ static const struct key_entry huawei_wmi_keymap[] = {
{ KE_IGNORE, 0x293, { KEY_KBDILLUMT... |
ad084a6d99bc182bf109c190c808e2ea073ec57b | Analyze and fix the following issue in the Linux kernel code: platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100 | Problem Details:
Only the HW rfkill state is toggled on laptops with quirks->ec_read_only
(so far only MSI Wind U90/U100). There are, however, a few issues with
the implementation:
1. The initial HW state is always unblocked, regardless of the actual
state on boot, because msi_init_rfkill only sets the SW state,
... | ```diff
diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c
index 6b18ec543ac3..f4c6c36e05a5 100644
--- a/drivers/platform/x86/msi-laptop.c
+++ b/drivers/platform/x86/msi-laptop.c
@@ -208,7 +208,7 @@ static ssize_t set_device_state(const char *buf, size_t count, u8 mask)
return -EINVAL... |
061115fbfb2ce5870c9a004d68dc63138c07c782 | Analyze and fix the following issue in the Linux kernel code: wifi: ath9k: fix printk specifier | Problem Details:
Smatch reports:
ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer
ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer
Fix it by modifying %lx to %p in the printk format string.
Note that with this change, the pointer address will be printed as a
hashed value b... | ```diff
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 9cd12b20b18d..9bfaadfa6c00 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -132,8 +132,8 @@ static int ath_ahb_probe(struct platform_device *pdev)
ah = sc->sc_ah;
... |
810e41cebb6c6e394f2068f839e1a3fc745a5dcc | Analyze and fix the following issue in the Linux kernel code: wifi: ath9k: fix fortify warnings | Problem Details:
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4,
inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./inc... | ```diff
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index af44b33814dd..f03d792732da 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -115,8 +115,10 @@ struct ath_tx_status {
u8 qid;
u16 desc_id;
u8 tid;
- u32 ba_low;
- u3... |
ec6beb82587c73cff52730567016cbc6c17822a8 | Analyze and fix the following issue in the Linux kernel code: phy: starfive: make phys depend on HAS_IOMEM | Problem Details:
the startfive phy drivers use devm_platform_ioremap_resource() which on
some archs (s390) is not present. So make the drivers depend on HAS_IOMEM
Fixes: f8aa660841bc ("phy: starfive: Add mipi dphy rx support")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all... | ```diff
diff --git a/drivers/phy/starfive/Kconfig b/drivers/phy/starfive/Kconfig
index a560533a674e..0508f9b123e0 100644
--- a/drivers/phy/starfive/Kconfig
+++ b/drivers/phy/starfive/Kconfig
@@ -5,6 +5,7 @@
config PHY_STARFIVE_JH7110_DPHY_RX
tristate "StarFive JH7110 D-PHY RX support"
+ depends on HAS_IOMEM
sele... |
6a758a3e831ce1a84c9c209ac6dc755f4c8ce77a | Analyze and fix the following issue in the Linux kernel code: platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops | Problem Details:
This patch fixes setting the cmd values to 0xb3 and 0xb4.
This is necessary on some TUF laptops in order to set the RGB mode.
Closes: https://lore.kernel.org/platform-driver-x86/443078148.491022.1677576298133@nm83.abv.bg
Signed-off-by: Kristian Angelov <kristiana2000@abv.bg>
Reviewed-by: Luke D. Jones... | ```diff
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 1038dfdcdd32..8bef66a2f0ce 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -738,13 +738,23 @@ static ssize_t kbd_rgb_mode_store(struct device *dev,
struct device_attribute *attr,
... |
3da435063777f8d861ba5a165344e3f75f839357 | Analyze and fix the following issue in the Linux kernel code: ALSA: usb-audio: Add quirk for Microsoft Modern Wireless Headset | Problem Details:
Microsoft Modern Wireless Headset (appearing on the host as "Microsoft
USB Link") has a playback and a capture mixer volume/switch, but they
are fairly broken. The descriptor reports wrong dB ranges for
playback, and the capture volume/switch don't influence on the actual
recording at all. Moreover, ... | ```diff
diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c
index f4bd1e8ae4b6..23260aa1919d 100644
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -374,6 +374,15 @@ static const struct usbmix_name_map corsair_virtuoso_map[] = {
{ 0 }
};
+/* Microsoft USB Link headset */
+/* a guess work: raw... |
b573bf35ef3f113c1717fa22cefdfdfbb83aec70 | Analyze and fix the following issue in the Linux kernel code: arm64: dts: ti: k3-am62-main: Remove power-domains from crypto node | Problem Details:
Only SYSFW has control of SA3UL power.
From SYSFW 08.04.00.002, for security reasons, device ID for power
management of SA3UL has been removed.
"power-domains" property in crypto node tries to access
the SA3UL, for which it gets NACK and hence, SA3UL driver doesn't
probe properly.
Fixes: 8af893654c02... | ```diff
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 5cea46be40f5..33b6aadc9083 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -174,7 +174,6 @@
crypto: crypto@40900000 {
compatible = "ti,am62-sa3ul";
... |
e1f7d17a734c5c617d05c3d188939d5032d3d5a2 | Analyze and fix the following issue in the Linux kernel code: dt-bindings: crypto: ti,sa2ul: make power-domains conditional | Problem Details:
Devices specific to compatible ti,am62-sa3ul don't have control over
power of SA3UL from main domain.
"power-domains" property in crypto node tries to access
the SA3UL power, for which it gets NACK and hence, driver doesn't
probe properly for those particular devices.
Make "power-domains" property as... | ```diff
diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
index 77ec8bc70bf7..f0ef7685550a 100644
--- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
+++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -66,10 +66,22 @@ patte... |
8717c76ff38d8a6fa99cce4cccf7892288108ec8 | Analyze and fix the following issue in the Linux kernel code: arm64: dts: ti: k3-j721e-som-p0: Remove Duplicated wkup_i2c0 node | Problem Details:
wkup_i2c0 and associated eeprom device node were duplicated,
This patch fixes the node duplication.
Fixes: 4af0332876f9 ("arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230721082344.1534094-1-u-kumar1@ti.co... | ```diff
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 38ae13cc3aa3..e90e43202546 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -201,19 +201,6 @@
};
};
-&wkup_i2c0 {
- status = "okay";
- pi... |
ac20a73d765c0374f5e7b5d0f2f43c4598d69c66 | Analyze and fix the following issue in the Linux kernel code: ASoC: codecs: ES8326: Fix power-up sequence | Problem Details:
Old power-up sequence causes large pop noise during start-up.
Using a new sequence instead.
Also, the registers are now reset to default value in suspend
function.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://lore.kernel.org/r/20230717033223.42506-3-zhuning0077@gmail.com
Signed-off-b... | ```diff
diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c
index 9f4408dcf3af..ffb61a3cbfe4 100644
--- a/sound/soc/codecs/es8326.c
+++ b/sound/soc/codecs/es8326.c
@@ -638,40 +638,77 @@ out:
static int es8326_resume(struct snd_soc_component *component)
{
struct es8326_priv *es8326 = snd_soc_component... |
f85739c0b2b0d98a32f5ca4fcc5501d2b76df4f6 | Analyze and fix the following issue in the Linux kernel code: ASoC: atmel: Fix the 8K sample parameter in I2SC master | Problem Details:
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work
because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2
series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
Signed-off-by: Guiting Shen <aarongt.shen... | ```diff
diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c
index 49930baf5e4d..69a88dc65165 100644
--- a/sound/soc/atmel/atmel-i2s.c
+++ b/sound/soc/atmel/atmel-i2s.c
@@ -163,11 +163,14 @@ struct atmel_i2s_gck_param {
#define I2S_MCK_12M288 12288000UL
#define I2S_MCK_11M2896 11289600UL
+#defin... |
23adeb7056acd4fd866969f4afb91441776cc4f5 | Analyze and fix the following issue in the Linux kernel code: ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0 | Problem Details:
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Rep... | ```diff
diff --git a/sound/soc/codecs/rt711-sdca-sdw.c b/sound/soc/codecs/rt711-sdca-sdw.c
index 119e1f9605d7..23f23f714b39 100644
--- a/sound/soc/codecs/rt711-sdca-sdw.c
+++ b/sound/soc/codecs/rt711-sdca-sdw.c
@@ -438,8 +438,16 @@ static int __maybe_unused rt711_sdca_dev_resume(struct device *dev)
if (!rt711->first_... |
b69de265bd0e877015a00fbba453ef72af162e0f | Analyze and fix the following issue in the Linux kernel code: ASoC: rt711: fix for JD event handling in ClockStop Mode0 | Problem Details:
When the system suspends, peripheral Imp-defined interrupt is disabled.
When system level resume is invoked, the peripheral Imp-defined interrupts
should be enabled to handle JD events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reported-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: htt... | ```diff
diff --git a/sound/soc/codecs/rt711-sdw.c b/sound/soc/codecs/rt711-sdw.c
index 87dafcb4545d..33dced388f9e 100644
--- a/sound/soc/codecs/rt711-sdw.c
+++ b/sound/soc/codecs/rt711-sdw.c
@@ -538,8 +538,15 @@ static int __maybe_unused rt711_dev_resume(struct device *dev)
if (!rt711->first_hw_init)
return 0;
-... |
a0b7c59ac1a9bae015a9b90dfda28158586006c8 | Analyze and fix the following issue in the Linux kernel code: ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0 | Problem Details:
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Rep... | ```diff
diff --git a/sound/soc/codecs/rt722-sdca-sdw.c b/sound/soc/codecs/rt722-sdca-sdw.c
index cc57e4e27805..e9103ffb3f50 100644
--- a/sound/soc/codecs/rt722-sdca-sdw.c
+++ b/sound/soc/codecs/rt722-sdca-sdw.c
@@ -463,8 +463,16 @@ static int __maybe_unused rt722_sdca_dev_resume(struct device *dev)
if (!rt722->first_... |
7a8735c1551e489351172d0da96128f6f8b52b2d | Analyze and fix the following issue in the Linux kernel code: ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0 | Problem Details:
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Rep... | ```diff
diff --git a/sound/soc/codecs/rt712-sdca-sdw.c b/sound/soc/codecs/rt712-sdca-sdw.c
index ad06267b0ea0..6bc50396a0f6 100644
--- a/sound/soc/codecs/rt712-sdca-sdw.c
+++ b/sound/soc/codecs/rt712-sdca-sdw.c
@@ -438,8 +438,16 @@ static int __maybe_unused rt712_sdca_dev_resume(struct device *dev)
if (!rt712->first_... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.