id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-03000 | architecture | I need a low-poly high perimeter wall segment. | Asset: High stone perimeter wall
Triangle budget: 400
Brief: Tall straight wall running along X with flat front face +Z, squared coping cap overhanging the top, and a slightly wider pier at each end rising just above the coping. Iron-grey stone with an oak coping.
Required named parts: wall_segment, coping_cap, pier_le... |
stage1-train-03001 | architecture | Build a low-poly high-rise apartment building. | Asset: Slate high-rise apartment block
Triangle budget: 850
Brief: A tall rectangular tower, roughly 3x wider than deep, with a flat roof; front and back facades carry three stacked bands of repeated window panes recessed into the wall, plus a small stair penthouse and parapet on the roof. A shallow entrance canopy pro... |
stage1-train-03002 | vehicle | Build a low-poly high-speed train. | Asset: Sleek high-speed train
Triangle budget: 750
Brief: Single streamlined rail car facing +Z: rounded tapered nose, long slab-sided body with a continuous ivory window band, low skirt, two bogies with four wheels each, and a small pantograph folded on the roof. Ivory body with navy accent nose and iron undercarriage... |
stage1-train-03003 | vehicle | Build a low-poly high-wing plane. | Asset: High-wing plane
Triangle budget: 800
Brief: Small single-prop plane facing +Z: rounded fuselage with a tapered nose and a single wing mounted high across the top, small cockpit canopy, tail fin plus horizontal stabilizer at the rear, two strutted landing legs with small wheels under the body, and a two-blade pro... |
stage1-train-03004 | tool or gear | I need a low-poly highlighter pen. | Asset: Yellow highlighter
Triangle budget: 250
Brief: Highlighter lying along Z: long hexagonal barrel in flat yellow, black end cap, ivory chisel tip at the front (+Z) with a small angled wedge, thin clip on the cap. Slightly flattened tip taper.
Required named parts: barrel, cap, tip, clip
```javascript
function bui... |
stage1-train-03005 | architecture | Build a low-poly hill monastery. | Asset: Hilltop monastery
Triangle budget: 900
Brief: A squat stone hill mound rising from the ground with a small monastery on its summit: ivory-walled main hall with a darkWood pitched roof, a slender bell tower at one end holding a brass bell under a small pyramidal cap, and an arched door facing +Z. Stone mound in i... |
stage1-train-03006 | architecture | Build a low-poly hill temple. | Asset: Hilltop shrine
Triangle budget: 750
Brief: Small hillside temple facing +Z: ivory stone body behind a front portico of two slim columns, a broad stone step below, triangular pediment above, and a shallow hipped navy roof with a brass finial. Compact and toy-like, all parts connected.
Required named parts: step, ... |
stage1-train-03007 | architecture | Build a low-poly hillfort gate. | Asset: Hillfort gate
Triangle budget: 900
Brief: Standing timber gateway: two thick square oak posts, a heavy dark-wood lintel beam spanning them, two gate leaves filling the opening, each leaf braced with a diagonal iron band. Small angled brace struts lean from the outer faces of the posts to the ground. Symmetrical ... |
stage1-train-03008 | animal | I need a low-poly Himalayan cat. | Asset: Fluffy Himalayan cat
Triangle budget: 650
Brief: Sitting upright Himalayan: rounded fluffy ivory body tapering to a flat-faced head, small dark triangular ears, dark mask on the face, short front paws planted forward, thick dark tail curled around one side. Ivory coat with darkWood points and navy eyes.
Required... |
stage1-train-03009 | architecture | Build a low-poly Himalayan wooden house. | Asset: Snow-worn Himalayan house
Triangle budget: 900
Brief: Upright house facing +Z: a squat stone ground floor in iron-grey, a wider timber upper storey in oak overhanging it, a shallow darkWood gabled roof with deep eaves, and a small ivory-paned window pair plus door on the front. A simple balcony rail runs across ... |
stage1-train-03010 | architecture | Build a low-poly Hindu temple shrine. | Asset: Weathered temple shrine
Triangle budget: 900
Brief: Faces +Z: stepped square plinth, small porch with two ivory pillars framing a dark doorway into the cube sanctum, above which rises a tapering curvilinear shikhara tower topped by a ribbed amalaka disc and a brass finial. Ivory stone body with oak accents and b... |
stage1-train-03011 | prop | I need a low-poly hockey glove prop. | Asset: Rust hockey glove
Triangle budget: 500
Brief: Ice-hockey gauntlet lying palm-down on the ground, cuff at the back (-Z), four stubby segmented fingers pointing forward (+Z), thumb splayed out to the left (-X). Flared rust leather backhand pad with a navy flared cuff, ivory lacing strip across the back, black fing... |
stage1-train-03012 | prop | I need a low-poly hockey puck. | Asset: Hockey puck
Triangle budget: 200
Brief: Single flat black rubber puck: short wide cylinder with slightly chamfered top and bottom edges, lying flat on the ground, axis vertical. Simple knurled side band of flat facets for a deliberate planar look.
Required named parts: puck_body, puck_rim
```javascript
function... |
stage1-train-03013 | animal | I need a low-poly hognose snake. | Asset: Coiled hognose snake
Triangle budget: 550
Brief: Resting hognose snake lying in a loose flat S-coil on the ground, thick body tapering to a thin tail, blunt head raised slightly at the front (+Z) with the signature upturned snout scale. Rust body with oak blotches and darkWood underside; small black eyes.
Requir... |
stage1-train-03014 | tool or gear | I need a low-poly blacksmith's holdfast. | Asset: Blacksmith's holdfast
Triangle budget: 300
Brief: L-shaped iron holdfast: stout vertical shank standing at the origin, a thick bend at its top, then a horizontal arm reaching forward (+Z) that ends in a small flat downturned pad. A brass collar ring sits near the top of the shank; iron is faceted, six-sided bar ... |
stage1-train-03015 | tool or gear | I need a low-poly hole punch. | Asset: Brass desk hole punch
Triangle budget: 350
Brief: Office hole punch sitting on its flat base: chunky rectangular body with a shallow paper slot at the front (+Z), a hinged lever arm angled up and back (-Z), and two small punch pins under the lever tip. Iron body with a brass lever.
Required named parts: base, bo... |
stage1-train-03016 | tool or gear | I need a low-poly hole saw bit. | Asset: Hole saw
Triangle budget: 550
Brief: Hole saw standing upright on its toothed rim: short wide iron cup with a ring of square teeth at the bottom edge, flat circular arbor plate closing the top, small nut in the centre, and a hex shank rising from it. A thin pilot drill bit pokes down inside the cup below the tee... |
stage1-train-03017 | prop | Build a low-poly holiday doormat. | Asset: Holiday doormat
Triangle budget: 250
Brief: Flat rectangular doormat lying on the ground at y=0, mat body in sage with a raised ivory border rim; a simple flat pine-tree motif in navy sits centred on the mat, slightly proud of the surface. Long axis along X, front faces +Z.
Required named parts: mat_body, border... |
stage1-train-03018 | prop | I need a low-poly holiday pillow. | Asset: Holiday holly pillow
Triangle budget: 400
Brief: Upright cushion, squarish with rounded corners and a slightly puffed ivory front face; a small sage holly sprig with three rust berries appliqued at the centre front, plus a brass corner tuft at each of the four corners. Front faces +Z.
Required named parts: pillo... |
stage1-train-03019 | plant or nature | Build a low-poly hollow tree stump. | Asset: Hollow oak stump
Triangle budget: 400
Brief: Cut tree stump: squat 8-sided trunk with an open top and dark hollow cavity inside, a slightly raised dark rim around the opening, and three splayed roots gripping the ground at the base. Oak bark with darkWood interior and rim.
Required named parts: stump_body, hollo... |
stage1-train-03020 | prop | I need a low-poly holly wreath. | Asset: Holly wreath
Triangle budget: 550
Brief: Upright wreath facing +Z in the XY plane, ring bottom near y=0: a thin sage-green ring base wrapped with flat pointed holly leaves in clusters around the ring, small rust berry clusters, and a rust bow at the bottom. Flat-shaded, every leaf and berry touching the ring.
Re... |
stage1-train-03021 | fantasy or game | Build a low-poly holo projector disc. | Asset: Holo projector disc
Triangle budget: 400
Brief: Flat squat iron disc base with a brass rim ring and three small brass clamps evenly around the edge; a domed ivory lens sits in the centre, and a low sage-green light cone rises from the lens, narrow at the apex where it meets the dome. Sits flat, top faces +Y.
Req... |
stage1-train-03022 | fantasy or game | I need a low-poly hologram sign for a fantasy game. | Asset: Flickering hologram sign
Triangle budget: 550
Brief: Small brass-and-iron projector pedestal on the ground: stepped base, short fluted post, angled emitter head with a glass lens aimed upward. Above it a thin beam column supports a floating translucent panel with a rectangular navy border, faintly curved, glowin... |
stage1-train-03023 | tool or gear | Build a low-poly holy mace. | Asset: Holy mace
Triangle budget: 500
Brief: Upright ceremonial mace standing vertical: slim oak shaft with iron bands, brass cross-guard below the head, a bulbous brass head ringed by four flat radiating flanges tipped with ivory, small brass pommel at the bottom. Held head-up, flanges facing front/back/left/right.
Re... |
stage1-train-03024 | vehicle | Build a low-poly homebuilt airplane. | Asset: Homebuilt light aircraft
Triangle budget: 800
Brief: Small single-engine high-wing homebuilt: tapered ivory fuselage with nose at +Z, flat wing mounted above the cabin, bubble canopy over the cockpit, tail fin and tailplane at -Z, two-blade iron propeller on the nose, two main wheels on short struts under the fu... |
stage1-train-03025 | animal | Build a low-poly honey badger. | Asset: Honey badger
Triangle budget: 700
Brief: Stocky low-slung badger standing square: broad flattened body, blunt wedge head held low, tiny round ears, four short sturdy legs with flat feet, short bushy tail. Black fur with an ivory dorsal stripe running from crown to tail base, rust nose tip. Faces +Z.
Required nam... |
stage1-train-03026 | container or food | I need a low-poly honey dipper. | Asset: Honey dipper
Triangle budget: 300
Brief: Honey dipper standing upright: slender round handle at the top, thin shaft below it, and a fat barrel-shaped dipper head at the bottom with three raised crosswise ridge rings; the head's lowest point sits just at ground level. Handle and shaft in oak, head and ridge rings... |
stage1-train-03027 | tool or gear | Build a low-poly honing guide. | Asset: Brass-roller honing guide
Triangle budget: 450
Brief: Sharpening honing guide: a flat iron body block with a raised jaw plate on top gripping a blade slot, a brass roller on a short axle slung under the front (+Z), and a black thumbscrew standing on top at the back. Front faces +Z, roller resting at y=0.
Require... |
stage1-train-03028 | container or food | I need a low-poly honing steel. | Asset: Honing steel
Triangle budget: 300
Brief: Sharpening steel standing upright on its handle butt at ground level: an oval turned-wood handle, a brass ferrule and a small guard above it, then a long slender iron rod tapering to a rounded tip pointing up.
Required named parts: handle, ferrule, guard, rod, tip
```jav... |
stage1-train-03029 | plant or nature | Build a low-poly hoodoo rock spire. | Asset: Weathered hoodoo spire
Triangle budget: 500
Brief: Upright eroded sandstone spire: a broad flared base tapering into a thick lower column, a narrow pinched neck, then a slightly wider upper column, topped by an oversized flat cap rock that overhangs on all sides. Faceted rust and oak strata bands with an ivory b... |
stage1-train-03030 | plant or nature | Build a low-poly hop cone. | Asset: Hop cone
Triangle budget: 400
Brief: Single hop cone standing upright on a short stem, tapering teardrop shape made of overlapping sage-green bracts in three staggered whorls around a slimmer central core, tips pinched at the top, hanging-tip at the top pointing up +Y. A few ivory seed hints peeking between brac... |
stage1-train-03031 | architecture | Build a low-poly hop kiln. | Asset: Weathered hop kiln
Triangle budget: 700
Brief: Oast-house kiln: squat round tower of ivory-rendered wall with a steep conical dark-iron cowl roof on top, a small white finial at the peak, a low arched darkWood door on the +Z face, and a couple of small iron vent slots high up. Ratio about 2:3 walls to roof.
Requ... |
stage1-train-03032 | architecture | Build a low-poly Hopi stone house. | Asset: Stepped adobe stone house
Triangle budget: 700
Brief: Pueblo house sitting on the ground, front facing +Z: a wide flat-roofed clay lower block with a smaller upper storey set back in a step, round roof beams (vigas) protruding from each roof, a small dark door and two square ivory-framed windows on the front, an... |
stage1-train-03033 | animal | I need a low-poly hopping dinosaur. | Asset: Sprightly hopping dinosaur
Triangle budget: 600
Brief: Small bipedal hopper caught mid-crouch: rounded teardrop body leaning forward, blunt-snouted head, long tapering tail counterbalancing behind, two thick hind legs with big flat feet, tiny arms tucked to the chest. Sage body with ivory belly and snout.
Requir... |
stage1-train-03034 | tool or gear | I need a low-poly hori hori knife. | Asset: Field-worn hori hori knife
Triangle budget: 250
Brief: Hori hori lying flat on the ground along the Z axis, blade tip forward (+Z) and handle back, thin enough to read clearly from above. Tapered scoop blade with a concave edge and pointed tip in iron, a short brass ferrule, and a rounded oak grip with a slight ... |
stage1-train-03035 | vehicle | Build a low-poly horizontal directional drill rig. | Asset: Compact directional drill rig
Triangle budget: 800
Brief: Tracked drilling rig facing +Z: two low black crawler tracks under a blocky iron chassis, a navy operator cab on the left rear and a rust engine housing on the right, and an angled iron drill mast sloping down toward the front carrying a brass drill head ... |
stage1-train-03036 | fantasy or game | I need a low-poly drinking horn cup. | Asset: Brass-rimmed horn cup
Triangle budget: 350
Brief: Drinking horn standing upright: tapered curved horn body widest at the top opening, narrow tip resting on a small round ivory foot, brass rim band around the mouth and a brass band near the tip. Ivory horn, brass fittings.
Required named parts: horn_body, rim, ba... |
stage1-train-03037 | plant or nature | Build a low-poly hornbeam tree. | Asset: Hornbeam tree
Triangle budget: 500
Brief: Sturdy hornbeam: short thick fluted trunk with a slight lean, flaring root flare at the ground, and a dense egg-shaped crown built from three overlapping faceted cluster blobs, tallest centred. Grey fluted trunk, sage foliage with one darker navy-tinted cluster for depth... |
stage1-train-03038 | animal | Build a low-poly bull. | Asset: Horned bull
Triangle budget: 700
Brief: Standing bull facing +Z: heavy barrel body, low broad head with two short ivory horns curving up and out, four sturdy legs with black hooves flat on the ground, thin tail at the rear. Rust-brown coat with darkWood shading on the head.
Required named parts: body, head, horn... |
stage1-train-03039 | animal | Build a low-poly horned dinosaur toy. | Asset: Horned dinosaur
Triangle budget: 900
Brief: Chunky quadruped facing +Z: barrel body held on four short stout legs, low-slung head with a beak, a broad neck frill fanning behind the head, two long brow horns and one short nose horn. Sage body with ivory horns and beak, darkWood hooves.
Required named parts: body,... |
stage1-train-03040 | animal | Build a low-poly horned dinosaur. | Asset: Horned frilled dinosaur
Triangle budget: 900
Brief: Triceratops-like quadruped standing square with head facing +Z: heavy barrel body, low slung head with a broad upright bony frill behind it, two long brow horns plus a short nose horn, stout four-column legs and a thick tapering tail. Sage body with ivory horns... |
stage1-train-03041 | animal | Build a low-poly horned frog. | Asset: Horned frog
Triangle budget: 500
Brief: Squat wide horned frog sitting flat and wide, facing +Z: a broad rounded body almost as wide as long, a huge mouth seam across the front, two fleshy horn points above the eyes, and four short splayed legs tucked at the corners. Sage green body with rust-brown horn tips and... |
stage1-train-03042 | animal | I need a low-poly horned goat. | Asset: Horned goat
Triangle budget: 700
Brief: Standing goat facing +Z: lean barrel body on four straight legs, blocky head raised with two ivory horns swept back over the neck, short pointed beard under the chin, small upright tail. Ivory coat with darkWood hooves and horns tipped ivory.
Required named parts: body, he... |
stage1-train-03043 | fantasy or game | Build a low-poly horned helmet. | Asset: Horned helm
Triangle budget: 550
Brief: Iron war helm: rounded dome with a flared brow rim, narrow nose guard down the front (+Z), and two ivory horns curving up and outward from the temples. Brass rivets along the rim.
Required named parts: dome, brow_rim, nose_guard, horn_left, horn_right, rivets
```javascrip... |
stage1-train-03044 | tool or gear | I need a low-poly horned helmet. | Asset: Horned iron helmet
Triangle budget: 500
Brief: Iron war helm resting rim-down: rounded dome (8-sided), a thick rim band around the base, a short nose guard dropping at the front (+Z), and two curved horns sweeping up and out from the sides. Iron body and rim, brass rivets and horn tips, ivory horn cores.
Require... |
stage1-train-03045 | bird, sea creature or bug | I need a low-poly hornet. | Asset: Banded hornet
Triangle budget: 700
Brief: Hornet facing +Z: rounded black head with two short antennae, compact thorax with two pairs of flat ivory wings swept back, long tapered abdomen with rust bands, six thin black legs splayed to the ground. Body held above the ground, legs connected to thorax.
Required nam... |
stage1-train-03046 | animal | Build a low-poly rhino without a horn. | Asset: Hornless rhino
Triangle budget: 700
Brief: Standing hornless rhino facing +Z: heavy barrel body, broad low-slung head with a blunt square muzzle, small rounded ears, four stout columnar legs, thin tail at the back. Flat iron-grey hide.
Required named parts: body, head, muzzle, ear_left, ear_right, leg_front_left... |
stage1-train-03047 | plant or nature | I need a low-poly horseradish root. | Asset: Fresh horseradish root
Triangle budget: 450
Brief: A pale tapered horseradish root standing upright, slightly tilted, with two small side rootlets and a short crown from which a few sage-green leaf stalks rise. Ivory root coloring with oak shading at the crown.
Required named parts: main_root, rootlet_1, rootlet... |
stage1-train-03048 | bird, sea creature or bug | Build a low-poly horseshoe crab. | Asset: Horseshoe crab
Triangle budget: 550
Brief: Horseshoe crab resting on sand: domed horseshoe-shaped shell widest at the front (+Z), slight ridge down the middle, a hinged rear segment, and a long straight telson spine trailing back (-Z) slightly raised. Six stubby legs splayed under the rim, two small dark eyes on... |
stage1-train-03049 | bird, sea creature or bug | I need a low-poly horseshoe crab shell. | Asset: Horseshoe crab shell
Triangle budget: 400
Brief: Empty horseshoe crab shell resting dome-up: broad horseshoe carapace with a ridged midline, a hinged smaller abdominal plate behind it, and a long straight telson spike tapering back (-Z). Front is the rounded head edge facing +Z, with two small eye bumps on top. ... |
stage1-train-03050 | prop | I need a low-poly horseshoe pit. | Asset: Horseshoe pit
Triangle budget: 400
Brief: Shallow rectangular pit sunk to ground level with a darkWood plank border frame, flat rust-coloured clay bed inside, a single iron stake standing upright in the centre, and one horseshoe leaning against the stake. Front faces +Z.
Required named parts: frame, clay_bed, st... |
stage1-train-03051 | tool or gear | I need a low-poly garden hose nozzle. | Asset: Brass hose nozzle
Triangle budget: 350
Brief: Handheld hose nozzle lying level, tip pointing +Z, resting on the ground: tapered brass body, ribbed connector collar at the back, short narrow spout at the front, a black lever handle pivoting on a small iron pin above the body.
Required named parts: body, connector... |
stage1-train-03052 | tool or gear | I need a low-poly hose reel. | Asset: Garden hose reel
Triangle budget: 600
Brief: Cart-style hose reel facing +Z: two upright side frames joined by a crossbar and standing on flat feet, a horizontal drum between them wrapped with a chunky coiled hose, a brass crank handle on the right side and a short nozzle resting at the front. Oak frame, iron dr... |
stage1-train-03053 | architecture | Build a low-poly hospital building. | Asset: Small hospital building
Triangle budget: 900
Brief: Boxy two-storey ward block facing +Z with a flat roof and slight roof overhang, ivory walls with sage trim. A projecting entrance canopy centred on the front shelters a door, with a rust cross emblem on the wall above and two horizontal bands of ivory-dark wind... |
stage1-train-03054 | vehicle | I need a low-poly hospital car. | Asset: Hospital runabout
Triangle budget: 850
Brief: Compact boxy hospital van facing +Z, ivory body with navy window band and a rust-red cross panel on each side; four black wheels with iron hubs, a small red light bar on the roof, brass door handles. Chunky toy proportions, all parts touching.
Required named parts: b... |
stage1-train-03055 | architecture | Build a low-poly hospital hall. | Asset: Small hospital hall
Triangle budget: 950
Brief: Single-storey hospital hall facing +Z: a wide rectangular ivory block, shallow gabled iron roof, a recessed entrance bay under a flat canopy held by two sage columns, a pair of dark doors, and a rust cross emblem above the doors. Symmetric rows of small windows on ... |
stage1-train-03056 | tool or gear | Build a low-poly hot glue gun. | Asset: Hot glue gun
Triangle budget: 400
Brief: Pistol-shaped glue gun resting level: blocky tapered body with a brass nozzle at the front (+Z), a rounded handle dropping below at the rear, a trigger loop under the body ahead of the handle, and a glue stick poking out the back (-Z). Iron body, black handle and trigger,... |
stage1-train-03057 | furniture | I need a low-poly hot plate. | Asset: Electric hot plate
Triangle budget: 350
Brief: Portable single-burner hot plate: squat rectangular iron body with a recessed round burner on top, a flat spiral coil inside the recess ring, and one brass control knob on the front face; four tiny stub feet underneath lift the body just off the ground.
Required nam... |
stage1-train-03058 | container or food | I need a low-poly hot sauce bottle. | Asset: Hot sauce bottle
Triangle budget: 300
Brief: Upright squat bottle: rounded shoulder body filled with rust-red sauce, short neck, small brass screw cap on top, ivory wrap label band on the front (+Z). Glass body, brass cap.
Required named parts: body, neck, cap, label
```javascript
function buildAsset(THREE) {
... |
stage1-train-03059 | plant or nature | Build a low-poly hot spring cone. | Asset: Mineral hot spring cone
Triangle budget: 600
Brief: Stepped mineral cone rising from the ground, wide at the base and tapering to a small steaming pool at the top; three or four terraced lip rings around a hollow basin, with a rust-stained outer crust and a pale ivory-rimmed water surface set just below the rim.... |
stage1-train-03060 | architecture | Build a low-poly hotel skyscraper. | Asset: Boutique hotel tower
Triangle budget: 700
Brief: Tall rectangular hotel tower standing on y=0, front facade +Z with stacked horizontal window bands and a protruding ground-floor entrance canopy, flat roof with a small setback penthouse block and a thin parapet. Ivory body, navy window bands, brass canopy trim.
R... |
stage1-train-03061 | container or food | Build a low-poly hotel chafing dish. | Asset: Hotel steam pan
Triangle budget: 700
Brief: Rectangular chafing dish: iron stand with four short legs, a water pan on top, a shallower food pan inset, and a domed lid resting over it with a brass knob. Two brass loop handles on the left and right ends. Iron body, brass fittings, ground at y=0.
Required named par... |
stage1-train-03062 | fantasy or game | Build a low-poly fantasy hourglass. | Asset: Enchanted hourglass
Triangle budget: 700
Brief: Upright hourglass standing on a flat oak base disc with a matching top disc, joined by two slim iron side pillars; between them a waist-pinched glass body, upper bulb half-filled with ivory sand and lower bulb holding a low mound, brass collar rings at waist.
Requi... |
stage1-train-03063 | bird, sea creature or bug | I need a low-poly house martin. | Asset: House martin
Triangle budget: 400
Brief: Small perched songbird facing +Z: compact oval body with white underparts and dark navy back, small round head, short black beak, folded wings flat along the flanks, short forked tail behind (-Z), two thin legs on the ground. Ivory-white rump patch at the tail base.
Requi... |
stage1-train-03064 | animal | Build a low-poly house mouse. | Asset: House mouse
Triangle budget: 400
Brief: Crouched mouse facing +Z: low rounded haunch-heavy body with a pointed snout, two big round ears set high on the head, small front feet under the chest, and a long thin tail trailing back along the ground (-Z). Iron-grey body with ivory snout and belly, black bead eyes.
Re... |
stage1-train-03065 | animal | Build a low-poly house spider. | Asset: Dusky house spider
Triangle budget: 700
Brief: Low crouching spider facing +Z: small rounded cephalothorax in front, larger egg-shaped abdomen behind and raised, eight thin bent legs (four per side) splayed outward with tips on the ground. Body navy, legs black with darkWood joints.
Required named parts: cephalo... |
stage1-train-03066 | fantasy or game | Build a low-poly fantasy hover pallet. | Asset: Hover pallet
Triangle budget: 700
Brief: Floating cargo pallet hovering clear of the ground: a flat slatted oak deck in an iron frame with raised side rails, four brass corner brackets, and two iron hover pods slung underneath with flat sage underside discs; a low grip bar across the front edge. Nothing touches ... |
stage1-train-03067 | vehicle | Build a low-poly hoverboard. | Asset: Hoverboard
Triangle budget: 400
Brief: Flat rounded deck board lying level at low height, with two ivory grip pads on top, and two iron hover discs/rings beneath (front and rear) touching the deck underside; front faces +Z with a slight brass-trimmed nose rise.
Required named parts: deck, pad_left, pad_right, ho... |
stage1-train-03068 | animal | Build a low-poly howler monkey. | Asset: Howler monkey
Triangle budget: 700
Brief: Sitting howler monkey: compact hunched body with a broad mane-widened head, short snout muzzle, long curled prehensile tail behind, bent arms hanging forward, folded legs with feet gripping ground. Dark wood-brown fur, lighter muzzle.
Required named parts: body, head, mu... |
stage1-train-03069 | animal | Build a low-poly howling wolf. | Asset: Howling wolf
Triangle budget: 750
Brief: Wolf seated on its haunches, chest up, head tipped back with muzzle pointing skyward and jaw open in a howl, long tail flat behind, front legs straight down. Grey coat with ivory muzzle and belly, black nose and ear tips. Facing +Z.
Required named parts: body, chest, head... |
stage1-train-03070 | prop | Build a low-poly hula hoop prop. | Asset: Striped hula hoop
Triangle budget: 400
Brief: A single flat-shaded ring standing roughly upright with a slight lean, its lowest point touching the ground at y=0, ring plane facing +Z. Twelve-segment tube in sage with alternating ivory band segments and a small brass connector collar closing the hoop.
Required na... |
stage1-train-03071 | bird, sea creature or bug | I need a low-poly hummingbird feeder. | Asset: Hanging hummingbird feeder
Triangle budget: 400
Brief: Hanging feeder centred on the Y axis: a curved iron hook at the top, a small brass cap, a bulbous rust-red reservoir tapering to a narrow waist, a brass perch ring encircling the lower body, and three short black feeding ports spaced evenly around the base.
... |
stage1-train-03072 | animal | Build a low-poly hump-backed dinosaur. | Asset: Hump-backed dinosaur
Triangle budget: 800
Brief: Sturdy quadruped facing +Z: barrel body with a large rounded hump rising over the shoulders, short thick neck lifting to a small blunt head, heavy tapering tail sweeping back and down (-Z), four short column legs with flat feet on the ground. Sage body with ivory ... |
stage1-train-03073 | tool or gear | Build a low-poly hunting bow. | Asset: Recurve hunting bow
Triangle budget: 450
Brief: Upright recurve bow standing vertically: a curved oak stave split into upper and lower limbs with tips bending away from the archer, a thick iron-wrapped grip at the centre with a small brass arrow rest, and an ivory string running straight between the tips on the ... |
stage1-train-03074 | plant or nature | Build a low-poly corn cob with the husk peeled back. | Asset: Husked corn cob
Triangle budget: 400
Brief: Corn cob standing upright, tapered at the top, kernel surface as faceted brass column; four sage husk leaves peeled down and splayed outward around the lower half, tips resting near the ground; a few short ivory silk threads at the crown.
Required named parts: cob, hus... |
stage1-train-03075 | bird, sea creature or bug | I need a low-poly hydra. | Asset: Little marsh hydra
Triangle budget: 900
Brief: Squat four-legged marsh hydra facing +Z: barrel body low to the ground, three splayed necks rising from the shoulders, each ending in a small blunt-jawed head, stumpy legs and a short tapering tail. Sage-green hide with rust belly, ivory eyes.
Required named parts: ... |
stage1-train-03076 | tool or gear | I need a low-poly hydration bladder. | Asset: Trail hydration bladder
Triangle budget: 400
Brief: Soft water reservoir standing slightly slumped upright: rounded pillow-shaped bag with a screw cap on the top edge, a slim hose leaving the lower side and arcing up to a bite valve. Navy bag, black cap and hose, iron valve.
Required named parts: bladder, cap, h... |
stage1-train-03077 | tool or gear | Build a low-poly hydraulic floor jack. | Asset: Hydraulic floor jack
Triangle budget: 750
Brief: Low-slung shop jack facing +Z: flat iron chassis on two rear casters and one front wheel pair, a lifting arm angled up from the chassis to a small round saddle pad, a short hydraulic ram beneath it, and a long handle socket leaning back with the handle lever tilte... |
stage1-train-03078 | vehicle | Build a low-poly ice bunker reefer railcar. | Asset: Ice bunker reefer
Triangle budget: 900
Brief: Refrigerated boxcar seen from its long door side (+Z), length running along X. Tall slab-sided body with a shallow peaked roof, a wide sliding door centred on the +Z face, and one raised ice hatch cover on the roof at each end (left/right along X). Dark underframe wi... |
stage1-train-03079 | container or food | I need a low-poly ice cream scoop in a bowl. | Asset: Scoop of ice cream
Triangle budget: 450
Brief: A single rounded ice cream scoop sitting in a shallow low-sided bowl, slightly peaked on top with a rust berry drizzle over the crown and a small berry on top. Scoop is ivory, bowl dark iron with a brass rim. Front faces +Z.
Required named parts: bowl, bowl_rim, sco... |
stage1-train-03080 | vehicle | Build a low-poly ice cream van. | Asset: Ice cream van
Triangle budget: 900
Brief: Boxy toy ice cream van facing +Z: tall ivory body with a flat roof, smaller rounded cab nose at the front, four black wheels with iron hubs, a wide serving hatch cut into the right side with a brass counter lip, and a small roof sign box on top. Navy skirt stripe along t... |
stage1-train-03081 | fantasy or game | Build a low-poly ice drake. | Asset: Ice drake
Triangle budget: 900
Brief: Crouching quadruped drake facing +Z, chest low, long tail sweeping back, half-folded wings held along the flanks, swept-back horns and a short snout. Pale icy blue body, navy wing membranes and spine ridge, ivory horns and claws.
Required named parts: body, neck, head, horns... |
stage1-train-03082 | fantasy or game | Build a low-poly ice elemental. | Asset: Frostbound ice elemental
Triangle budget: 900
Brief: Hulking ice elemental with a tapered clustered crystal lower body rooted at the ground, faceted torso, small angular head with a glowing core in the chest, two chunky arms hanging forward, and jagged shoulder and back spikes. Pale ice blue and ivory planes wit... |
stage1-train-03083 | vehicle | Build a low-poly ice harvester vehicle. | Asset: Ice harvester
Triangle budget: 850
Brief: Tracked ice-cutting rig facing +Z: a boxy navy hull on two low iron track units, a small boxy cab with ivory window panes set at the back, and a big circular iron saw blade mounted on a forward-angled arm at the front, with a short brass exhaust stack and a rust chute be... |
stage1-train-03084 | vehicle | Build a low-poly ice hauler. | Asset: Ice hauler sled
Triangle budget: 550
Brief: Low flat wooden sled for hauling ice: shallow oak tray on two iron runners, a darkWood tow bar at the front (+Z), and two stacked blocky ivory ice chunks lashed in the tray with a brass strap.
Required named parts: tray, runner_left, runner_right, tow_bar, ice_block_1,... |
stage1-train-03085 | architecture | I need a low-poly ice house. | Asset: Weathered ice house
Triangle budget: 550
Brief: Squat rectangular ice house, about twice as wide as tall with thick walls, a shallow gabled roof and a single centered door on the +Z front; small stone step at the threshold. Ivory walls, darkWood door, sage roof, oak lintel.
Required named parts: body, roof, door... |
stage1-train-03086 | animal | Build a low-poly ice narwhal. | Asset: Pale ice narwhal
Triangle budget: 550
Brief: A small narwhal resting belly-down on the ground facing +Z: tapered rounded body widest at the shoulders, blunt head, a long ivory spiral tusk projecting forward from the snout, two small side flippers, and a horizontal tail fluke at the back. Pale ice-blue body with ... |
stage1-train-03087 | bird, sea creature or bug | Build a low-poly ice penguin. | Asset: Ice penguin
Triangle budget: 600
Brief: Upright penguin standing on flat webbed feet: egg-shaped body tapering to a rounded head, pale ivory belly patch on the front, short brass beak, two flat flippers angled out from the sides, tail nub at the back. Navy back and head, ivory front.
Required named parts: body, ... |
stage1-train-03088 | fantasy or game | I need a low-poly ice rune for a fantasy game. | Asset: Glowing ice rune
Triangle budget: 400
Brief: A jagged pale-blue crystal shard standing upright with a flat front face, a carved angular rune glyph glowing on that face (+Z), and two smaller crystal shards leaning against its base on either side, all fused together. Flat-shaded faceted planes, no text.
Required n... |
stage1-train-03089 | prop | I need a low-poly ice skate. | Asset: Single ice skate
Triangle budget: 400
Brief: One upright skate facing +Z: navy boot with a pale cuff and laced tongue, a flat dark sole under it, two short posts on a blade holder, and a thin iron blade running front to back with a slight upward curl at the toe.
Required named parts: boot, cuff, tongue, sole, bl... |
stage1-train-03090 | bird, sea creature or bug | Build a low-poly ice swan. | Asset: Carved ice swan
Triangle budget: 550
Brief: Ice-sculpture swan facing +Z: rounded breast and body low to the ground, an S-curved neck rising in two segments to a small head turned forward with a short rust beak and black eye; folded wings swept back over the flanks, a pointed tail, and two webbed feet flat at y=... |
stage1-train-03091 | fantasy or game | Build a low-poly ice troll. | Asset: Hunched ice troll
Triangle budget: 1000
Brief: Hulking hunched troll standing with oversized sloping shoulders and a small head thrust forward, long arms with heavy fists hanging near the ground, short thick legs. Pale ice-blue skin, ivory tusks, navy hide loincloth. Flat-shaded, chunky faceted planes; all limbs... |
stage1-train-03092 | plant or nature | Build a low-poly iceberg chunk. | Asset: Drifting iceberg block
Triangle budget: 500
Brief: A single ice chunk: broad angular berg body with a flat waterline band, two or three tilted peak shards rising from the top, a wider submerged mass tapering below, and a small shelf ledge jutting off one side. Pale ivory and cool blue-grey faceted planes, front ... |
stage1-train-03093 | vehicle | Build a low-poly icebreaker ship. | Asset: Sturdy icebreaker
Triangle budget: 850
Brief: Compact icebreaker resting on the ground, bow pointing +Z: heavy iron hull with a sloped reinforced bow, flat deck, boxy bridge superstructure set back, single funnel and a short mast. Iron hull, navy hull stripe, ivory deck and bridge trim, rust accents.
Required na... |
stage1-train-03094 | architecture | Build a low-poly turf house. | Asset: Icelandic turf house
Triangle budget: 800
Brief: Small turf farmhouse facing +Z: a wooden gabled front wall with a door and one small window, and a thick rounded turf-and-earth roof mound sweeping down over the low side walls, sitting flush on the ground. Dark wood front, sage turf.
Required named parts: front_g... |
stage1-train-03095 | prop | I need a set of low-poly icicle lights. | Asset: Icicle lights
Triangle budget: 500
Brief: Hanging string of icicle lights: a slightly sagging cord stretched between two small wall clips, with five downward strands of graduated lengths (longest in the middle), each strand ending in a small tapered icicle tip that glows ivory. Cord and clips in darkWood, icicle... |
stage1-train-03096 | prop | I need a low-poly icicle ornament. | Asset: Hanging icicle ornament
Triangle budget: 300
Brief: A single tapering icicle hanging point-down, tip near the ground: a brass eyelet loop at the top, a short ivory ferrule cap, then a faceted pale-blue shaft that narrows to a sharp point, with two smaller drip spikes fused to its sides. Hangs vertically, with th... |
stage1-train-03097 | container or food | I need a low-poly tub of icing. | Asset: Icing tub with spoon
Triangle budget: 450
Brief: Squat round tub with a slightly tapered rim, swirled ivory icing mounded above the rim, and a short wooden spoon resting in it with its handle leaning out over the edge. Sage tub body, ivory icing, oak spoon.
Required named parts: tub, icing_swirl, spoon, rim
```... |
stage1-train-03098 | vehicle | I need a low-poly idler rail car. | Asset: Small idler rail car
Triangle budget: 700
Brief: Unpowered flatbed rail trolley facing +Z: low plank deck on a wooden chassis, four iron flange wheels on two axles, short stake posts at the four corners, small coupler bar at each end. Oak deck and stakes, darkWood chassis, iron wheels.
Required named parts: deck... |
stage1-train-03099 | fantasy or game | I need a low-poly idol of fortune. | Asset: Gilded fortune idol
Triangle budget: 550
Brief: Squat carved idol seated cross-legged facing +Z: thick pedestal slab, round-bellied torso, blank ivory-faced head with a small brass crown, two stubby arms cupping a brass orb at its belly. Oak body with darkWood pedestal and brass accents.
Required named parts: pe... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.