id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-04200 | furniture | I need a low-poly pouf ottoman. | Asset: Tufted pouf
Triangle budget: 400
Brief: Round upholstered pouf: squat cylinder body with a slightly domed top, a small brass button at the top centre, and four short dark wood feet. Sage fabric.
Required named parts: body, top_dome, button, foot_1, foot_2, foot_3, foot_4
```javascript
function buildAsset(THREE)... |
stage1-train-04201 | vehicle | Build a low-poly poultry rail car. | Asset: Poultry car
Triangle budget: 750
Brief: Short four-wheeled stock car for hauling chickens: boxy darkWood body with ivory roof, row of slatted vents along the upper side, sliding door on the +Z face, oak underframe on four iron wheels; sits at ground level with wheels touching y=0.
Required named parts: underfram... |
stage1-train-04202 | container or food | I need a low-poly pound cake. | Asset: Pound cake loaf
Triangle budget: 350
Brief: A rectangular loaf cake sitting flat, front face +Z: ivory crumb body, gently domed oak-brown top crust, a shallow lengthwise crack along the crown, and one cut slice leaning against the front-right side. Pan-baked toy proportions, slightly wider than tall.
Required na... |
stage1-train-04203 | prop | Build a low-poly powder horn. | Asset: Weathered powder horn
Triangle budget: 400
Brief: Curved tapering horn lying horizontally along Z, wide flat base cap at the back (-Z) and a small brass spout cap at the narrow front (+Z), with a thin cord strap looping from base to spout. Ivory horn body, oak base cap, brass spout.
Required named parts: horn_bo... |
stage1-train-04204 | prop | Build a low-poly powder keg. | Asset: Powder keg
Triangle budget: 500
Brief: Squat staved barrel standing upright: bulging oak body with a flat ivory-stoppered lid, two dark iron hoops around the belly and a small brass bung on the front face. Slight barrel taper, hoops proud of the staves.
Required named parts: keg_body, hoop_top, hoop_bottom, lid,... |
stage1-train-04205 | architecture | Build a low-poly powder magazine. | Asset: Powder magazine
Triangle budget: 550
Brief: Small squat octagonal masonry storehouse: thick ivory stone walls, a steep navy pyramidal roof, and a single heavy darkWood door with iron bands facing +Z; a small brass vent finial caps the roof apex.
Required named parts: walls, roof, door, door_bands, vent_finial
`... |
stage1-train-04206 | prop | I need a small low-poly powder scoop. | Asset: Brass powder scoop
Triangle budget: 250
Brief: A small measuring scoop lying at a slight tilt: shallow rounded bowl open at the top-front, a short tapering handle rising back (-Z) and upward, joined by a narrow collar band. Brass bowl and collar, oak handle.
Required named parts: scoop_bowl, handle, collar
```j... |
stage1-train-04207 | tool or gear | I need a low-poly power bank. | Asset: Pocket power bank
Triangle budget: 400
Brief: Compact power bank lying flat: a chamfered rectangular slab (roughly 4:2:1) in navy, with an iron end panel on the +Z face carrying a wide USB-A socket and a smaller USB-C slot. A small brass button and three ivory LED dots sit in a row on the top face; all parts flu... |
stage1-train-04208 | vehicle | Build a low-poly toy power car. | Asset: Toy power car
Triangle budget: 700
Brief: Chunky battery-powered toy car facing +Z: low rounded navy body, a squat ivory-glazed cabin set mid-body, four small iron wheels tucked under the sills, and a boxy power pack with two brass terminal knobs on the rear deck. Everything sits flat, wheels touching y=0.
Requi... |
stage1-train-04209 | fantasy or game | I need a low-poly fantasy power converter prop. | Asset: Crackling power converter
Triangle budget: 600
Brief: Squat hexagonal iron housing on a sage base plate, its top open to a faceted pale-teal crystal core gripped by four brass cage ribs; a brass dial on the front face and a short brass output bolt on the right side. Iron body with brass trim, crystal glowing fla... |
stage1-train-04210 | furniture | I need a low-poly power extension reel. | Asset: Extension cable reel
Triangle budget: 700
Brief: Cable reel standing upright: rectangular iron frame on four small feet, a drum between two round side flanges, thick cable coil wound on the core, a brass crank handle on the right flange, a socket panel with two ivory sockets on the front, and a carry handle over... |
stage1-train-04211 | architecture | Build a low-poly power plant building. | Asset: Twin-tower power plant
Triangle budget: 850
Brief: Compact power plant: a long boxy turbine hall facing +Z with a flat iron roof and a darkWood door on the front, two tapered octagonal cooling towers rising behind the hall on either side, and one rust-red chimney with a brass band standing on the roof. Sage wall... |
stage1-train-04212 | architecture | Build a low-poly power pylon. | Asset: Lattice power pylon
Triangle budget: 700
Brief: Tall tapering steel lattice pylon: four splayed corner legs converging toward the top, braced by thin cross-members, two horizontal crossarms near the top with small hanging insulators. Flat iron colour with darker bracing.
Required named parts: leg_front_left, leg... |
stage1-train-04213 | fantasy or game | I need a low-poly power rune for a fantasy game. | Asset: Cracked power rune
Triangle budget: 400
Brief: Standing rune monolith: a tall angular iron-grey slab with chiselled planar facets, leaning slightly back, seated in a low wedge of dark rock at the ground. A diamond-shaped brass core crystal is set into a recessed notch mid-slab and glows, with two small angular s... |
stage1-train-04214 | animal | Build a low-poly prairie dog standing on guard. | Asset: Prairie dog sentinel
Triangle budget: 500
Brief: Sentinel prairie dog upright on its hind legs, body tapered and slightly leaning back, small round ears, muzzle forward, both front paws tucked against the chest, short tail flat on the ground behind. Sandy tan coat from oak lightened, ivory belly and muzzle, dark... |
stage1-train-04215 | plant or nature | Build a low-poly prairie mima mound. | Asset: Grassy mima mound
Triangle budget: 400
Brief: A wide, low earth dome with faceted slopes that meet the ground at y=0, roughly twice as broad as it is tall, one side slightly steeper. Dark-wood earth with three sage grass tufts sprouting near the crown and two small iron stones nestled at the foot.
Required named... |
stage1-train-04216 | fantasy or game | I need a low-poly set of prayer beads. | Asset: Prayer beads
Triangle budget: 400
Brief: A closed loop of ten evenly spaced round beads hanging in the XY plane, front facing +Z, with one larger pendant bead at the bottom of the loop and a small tassel hanging straight down from it, the tassel tip near ground level. Brass beads, rust tassel.
Required named par... |
stage1-train-04217 | plant or nature | Build a low-poly potted prayer plant. | Asset: Prayer plant
Triangle budget: 500
Brief: Potted Maranta: squat tapered rust pot with an ivory rim and dark soil disc, thin sage stems arcing outward and up, oval leaves held flat-to-slightly-raised with pale ivory veins and a darker sage blotch down the centre. Upright, front +Z.
Required named parts: pot, soil,... |
stage1-train-04218 | vehicle | Build a low-poly precision seeder implement. | Asset: Precision row seeder
Triangle budget: 1000
Brief: Compact trailed seeder facing +Z: A-frame hitch at front, horizontal toolbar frame, boxy seed hopper with brass lid latch sitting on top, small seed-meter drum under the hopper feeding three seed tubes down to three disc row units with press wheels. Two large iro... |
stage1-train-04219 | architecture | Build a low-poly prefab apartment tower. | Asset: Prefab apartment tower
Triangle budget: 650
Brief: Compact slab tower standing on the ground, front facing +Z: rectangular ivory body with a flat iron parapet cap, three recessed navy window bands stacked evenly up the facade, and a centered dark entrance doorway at the base with a small flat canopy above it. Fl... |
stage1-train-04220 | animal | Build a low-poly prehensile-tailed skink. | Asset: Prehensile-tailed skink
Triangle budget: 650
Brief: Stout skink lying low: thick cylindrical body along Z, blunt rounded head facing +Z, four short splayed legs, and a long tail curling upward in a spiral behind (-Z). Sage green with darker banding.
Required named parts: body, head, tail, leg_front_left, leg_fro... |
stage1-train-04221 | animal | Build a low-poly prehistoric bird egg. | Asset: Speckled prehistoric bird egg
Triangle budget: 350
Brief: Large upright egg, wider at the bottom and tapering to a slightly pointed top, resting on the ground at y=0. Ivory shell with a shallow crack seam running down one side and a few flat rust speckle patches.
Required named parts: egg_shell, crack_seam, spec... |
stage1-train-04222 | animal | Build a low-poly prehistoric camel. | Asset: Long-legged prehistoric camel
Triangle budget: 700
Brief: Standing Camelops facing +Z: heavy barrel body with one tall rounded hump, long neck sloping up to a small head with short ears, four long straight legs with dark hooves, thin tail at the back. Oak coat, darkWood hooves and muzzle, black eyes.
Required na... |
stage1-train-04223 | animal | I need a low-poly prehistoric crab. | Asset: Prehistoric crab
Triangle budget: 700
Brief: Broad flat domed carapace with a spiked rear rim, two chunky front claws raised forward (+Z), three pairs of jointed walking legs splayed to the sides, two short eye stalks on the front. Rust shell, iron legs, black eyes.
Required named parts: carapace, claw_left, cla... |
stage1-train-04224 | animal | Build a low-poly prehistoric crocodile. | Asset: Prehistoric crocodile
Triangle budget: 700
Brief: Low sprawling stance, belly near the ground, long flat snout facing +Z, thick tail tapering back to -Z, four short splayed legs, a row of dorsal scutes along back and tail. Sage body with darkWood scutes and a few ivory teeth.
Required named parts: body, snout_he... |
stage1-train-04225 | animal | I need a low-poly prehistoric dolphin. | Asset: Prehistoric dolphin
Triangle budget: 700
Brief: Streamlined archaic dolphin swimming forward along +Z, long tapering snout, low dorsal fin, horizontal tail flukes, small pectoral flippers angled down from the flanks. Slate-blue back with ivory underside, black eye dots.
Required named parts: body, snout, dorsal_... |
stage1-train-04226 | animal | I need a low-poly prehistoric lizard. | Asset: Sail-backed prehistoric lizard
Triangle budget: 700
Brief: Stout four-legged lizard standing splayed on the ground, head forward at +Z with a blunt snout, long tail sweeping back and slightly up, and a rust-coloured dorsal sail of triangular spines along the spine. Sage green body, darker sage legs, small black ... |
stage1-train-04227 | animal | I need a low-poly prehistoric manatee. | Asset: Prehistoric manatee
Triangle budget: 650
Brief: Plump sea-cow resting low with its belly just above the ground, long barrel body tapering to a flat rounded paddle tail, blunt downturned snout with two small ivory tusks, two small paddle flippers angled out from the shoulders. Sage-green hide with an ivory unders... |
stage1-train-04228 | animal | Build a low-poly prehistoric penguin. | Asset: Prehistoric penguin
Triangle budget: 550
Brief: Upright spear-beaked penguin standing on two flat webbed feet, tall tapered body with a slim ivory belly front, small round head with a long straight pointed beak projecting +Z, short stubby tail behind, two flat flippers angled down at the sides. Body and head bla... |
stage1-train-04229 | animal | I need a low-poly prehistoric rodent. | Asset: Prehistoric giant rodent
Triangle budget: 650
Brief: Stumpy crouching rodent with a heavy barrel body, short neck and blunt head, two small rounded ears, a pair of prominent ivory incisors, four splayed clawed legs flat on the ground, and a thick tapering tail curving back (-Z). Fur is darkWood with an oak back;... |
stage1-train-04230 | animal | Build a low-poly prehistoric seal. | Asset: Prehistoric seal
Triangle budget: 550
Brief: Long-bodied sea mammal resting on its belly: tapering body, blunt rounded head facing +Z with two short ivory tusks, a pair of small front flippers splayed to the sides, a fan tail with two hind flippers resting flat. Navy body, darkWood shading, ivory tusks.
Required... |
stage1-train-04231 | animal | I need a low-poly prehistoric shark. | Asset: Ancient shark
Triangle budget: 800
Brief: Prehistoric shark in a gentle swimming pose: long tapered body, blunt rounded snout, tall triangular dorsal fin, asymmetric heterocercal tail with a long upper lobe, broad swept pectoral fins, small pelvic fins underneath. Navy body, iron fins, ivory teeth and belly. Fac... |
stage1-train-04232 | animal | Build a low-poly prehistoric squid. | Asset: Prehistoric squid
Triangle budget: 700
Brief: Torpedo-shaped squid resting on splayed arms: tapering mantle pointing back (-Z), small triangular fins at the mantle tip, bulbous head with two large eyes facing forward, a ring of short arms plus two longer tentacles reaching down to the ground at +Z. Rust body, iv... |
stage1-train-04233 | animal | Build a low-poly prehistoric starfish. | Asset: Prehistoric starfish
Triangle budget: 400
Brief: Flat on the ground, pentaradial: a low domed central disc with five thick tapered arms radiating outward, one arm pointing +Z, arms slightly raised at their tips. Rust body with darkWood bumps along each arm and a small raised central knob.
Required named parts: d... |
stage1-train-04234 | animal | Build a low-poly prehistoric wolf. | Asset: Prehistoric dire wolf
Triangle budget: 900
Brief: Dire wolf standing on four legs, facing +Z: heavy chest and low-slung body, thick neck with a broad blunt head, short pricked ears, long muzzle, bushy tail hanging low behind. Iron-grey coat with black markings, ivory fangs.
Required named parts: body, chest, nec... |
stage1-train-04235 | furniture | Build a low-poly pressure cooker. | Asset: Cast-iron pressure cooker
Triangle budget: 400
Brief: Stout cylindrical pot sitting on its flat base, slightly domed lid clamped on top, two short side handles, and a small brass pressure weight on the lid's vent stub. Iron body with brass handles and weight.
Required named parts: pot_body, lid, handle_left, han... |
stage1-train-04236 | fantasy or game | Build a low-poly pressure plate trap. | Asset: Ancient pressure plate
Triangle budget: 300
Brief: Flat stone plate set flush in a shallow square stone frame, with a slightly raised iron-banded centre pad that sits a hair above the rim, hinting it can be pressed down. Weathered iron frame with a brass inlay ring at the centre. Sits at ground level, faces +Z.
... |
stage1-train-04237 | tool or gear | I need a low-poly pressure sprayer. | Asset: Garden pressure sprayer
Triangle budget: 550
Brief: Upright cylindrical pump sprayer standing on the ground: sage tank with a iron screw cap, a pump rod rising from the cap to a small T-handle, and a thin hose looping from the cap to a forward (+Z) angled wand ending in a brass nozzle. Everything connected.
Requ... |
stage1-train-04238 | tool or gear | I need a low-poly pressure washer. | Asset: Compact pressure washer
Triangle budget: 550
Brief: Upright cart-style washer facing +Z: boxy motor housing on a low frame, two wheels at the rear sides, a slim push handle rising at the back (-Z), and a lance clipped along the side with a coiled hose behind it.
Required named parts: frame, wheel_left, wheel_rig... |
stage1-train-04239 | plant or nature | Build a low-poly prickly pear in a pot. | Asset: Potted prickly pear
Triangle budget: 550
Brief: Terracotta pot with a rim, dark soil, and a prickly pear cactus of flat oval pads: one upright main pad, two tilted side pads branching low, one small pad above, with a single rust fruit on top. Terracotta rust, sage green pads.
Required named parts: pot, soil, pad... |
stage1-train-04240 | plant or nature | Build a low-poly prickly poppy. | Asset: Prickly poppy
Triangle budget: 500
Brief: Upright sage stem with three jagged lobed leaves low down, small dark prickles along the stem, and one open bloom at the top: four crumpled ivory petals fanned around a brass seed centre. Faces +Z, base at ground.
Required named parts: stem, leaf_1, leaf_2, leaf_3, prick... |
stage1-train-04241 | architecture | Build a low-poly priory building. | Asset: Small stone priory
Triangle budget: 1000
Brief: Modest priory chapel: long nave with ivory stone walls and a steep navy pitched roof, a square tower at the front (+Z) with a tall spire, arched darkWood door and two arched windows. Everything sits on the ground at y=0.
Required named parts: nave, roof, tower, spi... |
stage1-train-04242 | architecture | Build a low-poly prison tower for a hilltop keep. | Asset: Stone prison tower
Triangle budget: 700
Brief: Round stone tower, slightly tapered, with a wider crenellated top, a small barred window high on the front face, and a dark iron-bound oak door at ground level facing +Z. Flat-shaded grey stone with darkWood door, iron bars, black window recess.
Required named parts... |
stage1-train-04243 | vehicle | Build a low-poly prison transport van. | Asset: Prison transport van
Triangle budget: 850
Brief: Boxy paddy wagon facing +Z: tall slab-sided cargo box behind a shorter sloped-nose cab, four chunky dark wheels tucked in arch notches, small barred window high on each side and one on the rear door, a single navy roof beacon. Navy body slots over a darkWood chass... |
stage1-train-04244 | vehicle | Build a low-poly private jet. | Asset: Ivory private jet
Triangle budget: 900
Brief: Small business jet resting on tricycle landing gear, nose facing +Z: slim pointed fuselage with a cockpit taper, low swept wings, two rear-mounted pod engines, a swept T-tail with fin and tailplanes. Ivory hull, navy wingtips and fin accent, iron engine pods, black t... |
stage1-train-04245 | container or food | I need a low-poly produce duffel sack. | Asset: Produce duffel sack
Triangle budget: 500
Brief: Burlap duffel standing upright: soft rounded sack body (10-sided, slightly bulged), cinched neck with a folded collar, a cord tie just below the opening, and two carrot tops plus a leafy green poking out of the mouth. Sack in ivory, cord and carrot in rust, leaves ... |
stage1-train-04246 | container or food | Build a low-poly profiterole. | Asset: Chocolate profiterole
Triangle budget: 400
Brief: Single stacked profiterole: a flattened choux bun base, a squashed ivory cream layer sandwiched above it, a smaller oak choux bun on top, and a chocolate cap drizzling down over the top bun in a few flat drips. Symmetric round stack, face +Z.
Required named parts... |
stage1-train-04247 | furniture | Build a low-poly projection screen stand. | Asset: Portable projection screen stand
Triangle budget: 500
Brief: Tripod screen: three splayed iron legs meeting a collar, a vertical mast rising to a horizontal ivory screen housing, with a flat ivory screen hanging slightly unfurled below it and a small pull handle at its bottom edge. Screen faces +Z, brass collar ... |
stage1-train-04248 | prop | Build a low-poly projector unit. | Asset: Compact film projector
Triangle budget: 500
Brief: Small boxy projector: rectangular navy body sitting on four short feet, a cylindrical lens barrel protruding from the front, two film reels mounted upright on top on a small bracket, iron trim on the lens ring. Lens faces +Z.
Required named parts: body, foot_1, ... |
stage1-train-04249 | architecture | Build a low-poly propylon gateway. | Asset: Weathered propylon gateway
Triangle budget: 900
Brief: Monumental open gateway facing +Z: a wide stone step platform with two thick rectangular piers flanking a central passage, a flat lintel spanning them, and a slightly projecting cornice with brass trim on top. Ivory stone with brass edging.
Required named pa... |
stage1-train-04250 | prop | Build a low-poly prosthetic hook hand. | Asset: Prosthetic hook
Triangle budget: 400
Brief: Stands upright: a tapered navy socket cuff at the bottom, a short iron wrist shaft above it, and a heavy iron hook curving forward (+Z) and up from the shaft, its point turning back toward the body. Brass buckle strap on the cuff.
Required named parts: cuff, shaft, hoo... |
stage1-train-04251 | fantasy or game | Build a low-poly protection talisman. | Asset: Warding talisman
Triangle budget: 550
Brief: Flat ten-sided oak medallion standing upright, ringed by a thin iron rim, with a raised brass emblem on the front face; an iron suspension ring sits on top with a twisted sage cord loop, and three small ivory charms dangle beneath on short cords. Front faces +Z.
Requi... |
stage1-train-04252 | tool or gear | I need a low-poly pruning knife. | Asset: Pruning knife
Triangle budget: 300
Brief: Curved pruning knife lying flat, handle toward -Z, hooked dark-iron blade forward +Z with the cutting edge along the underside, small brass bolster and a lanyard ring at the pommel; oak handle scales.
Required named parts: blade, handle, bolster, lanyard_ring
```javascr... |
stage1-train-04253 | tool or gear | I need a low-poly pruning saw. | Asset: Pruning saw
Triangle budget: 350
Brief: Small pruning saw lying flat on the ground with blade pointing +Z: bulbous dark oak grip at the back, a brass ferrule where the blade enters, then a slender tapering iron blade with a row of chunky triangular teeth along its left edge. Flat and thin, all parts joined.
Requ... |
stage1-train-04254 | tool or gear | I need a low-poly pair of pruning shears. | Asset: Pruning shears
Triangle budget: 350
Brief: Bypass pruners lying flat with blades pointing +Z: two curved steel blades meeting at a brass pivot bolt, two short handles extending back (-Z) with dark wood grips, small spring coil between them. Iron blades, oak grips.
Required named parts: blade_left, blade_right, p... |
stage1-train-04255 | animal | Build a low-poly ptarmigan. | Asset: Plump ptarmigan
Triangle budget: 500
Brief: Plump ground bird standing: rounded egg-shaped body tilted slightly up at the breast, small round head with stubby black beak, short fan tail angled up and back (-Z), folded wings flat along the flanks, two short feathered legs. Ivory plumage with iron-grey mottling on... |
stage1-train-04256 | animal | I need a low-poly pterosaur. | Asset: Perched pterosaur
Triangle budget: 700
Brief: Pterosaur standing on the ground with wings folded up against its sides: slim body angled slightly forward, long beak head with a backward crest, two large triangular folded wings, two small clawed feet, short stiff tail. Sage body with rust crest and ivory beak. Fac... |
stage1-train-04257 | container or food | I need a low-poly pudding cup. | Asset: Vanilla pudding cup
Triangle budget: 350
Brief: Tapered open cup (wider at the rim, narrow base) sitting on the ground at y=0, filled with a rounded ivory pudding dome mounded just above the rim; a small brass spoon leans in from the right edge of the cup.
Required named parts: cup, rim, pudding, spoon
```javas... |
stage1-train-04258 | architecture | Build a low-poly pueblo adobe house. | Asset: Sunbaked pueblo house
Triangle budget: 700
Brief: Stepped adobe dwelling: broad low ground-floor block with a smaller upper tier set back toward -Z, flat roofs with slight parapet lips; a dark doorway centred on the front face and one small window; a row of cylindrical viga beam ends protruding under the upper r... |
stage1-train-04259 | animal | Build a low-poly pug. | Asset: Sitting pug
Triangle budget: 700
Brief: Sitting pug: compact barrel body with chest upright, big round head held high, short flat muzzle with a dark mask, two small folded ears, stubby front legs straight, hind legs tucked, and a tight curled tail over the rump. Fawn oak body, darkWood muzzle, ears and tail tip.... |
stage1-train-04260 | furniture | Build a low-poly pull-down faucet. | Asset: Pull-down kitchen faucet
Triangle budget: 450
Brief: Kitchen faucet standing on a small round deck base, a tall arched gooseneck spout rising and curving forward (+Z), with a cylindrical pull-down spray head hanging from the spout end just above the base, and a single lever handle on the side. Iron body, brass b... |
stage1-train-04261 | furniture | Build a low-poly pull-out trash can cabinet. | Asset: Pull-out trash bin cabinet
Triangle budget: 550
Brief: Compact under-counter waste bin: open-front oak cabinet box with a partially pulled-out drawer (+Z) holding an open iron bin with a slight rim; a brass pull handle on the drawer front, two thin wooden slides connecting drawer to cabinet sides. Front faces +Z... |
stage1-train-04262 | prop | Build a low-poly pulley block. | Asset: Weathered pulley block
Triangle budget: 400
Brief: Double-cheek pulley: two flat oak side plates sandwiching a grooved iron sheave on a brass axle, with a short iron loop and hook at the top. Hangs vertically, sheave facing +X so the rope groove shows from the side.
Required named parts: cheek_left, cheek_right,... |
stage1-train-04263 | plant or nature | Build a low-poly pumice stone. | Asset: Rough pumice chunk
Triangle budget: 300
Brief: An irregular lumpy rock resting on the ground, wider than tall with a flat-ish underside and chunky faceted faces; three smaller angular lobes fused onto its sides for a porous, broken silhouette. Pale grey-iron body with a couple of darker facets; no hollow holes c... |
stage1-train-04264 | container or food | Build a low-poly syrup dispenser with a pump head. | Asset: Pump-head syrup dispenser
Triangle budget: 500
Brief: Upright syrup dispenser: squat cylindrical glass jar body with a slight shoulder, a collar lid on top, a narrow pump stem rising to a rounded plunger cap, and a short spout curving down from the collar front (+Z). Ivory jar, brass collar and spout, dark iron ... |
stage1-train-04265 | architecture | I need a low-poly pump-out station for a dock. | Asset: Dock pump-out station
Triangle budget: 700
Brief: Small dockside pump-out station: a squat iron cabinet on a short pedestal foot, a brass control panel on the front face, a round hose reel mounted on the right side with a coiled ivory hose, and a nozzle clipped into a holster on the left. Faces +Z, everything co... |
stage1-train-04266 | prop | I need a low-poly punching bag. | Asset: Free-standing punching bag
Triangle budget: 500
Brief: Hanging heavy bag on a compact free-standing frame: round weighted base, upright post, short horizontal arm at the top, and a pair of straps dropping to a fat cylindrical bag hanging with a small ground clearance. Navy bag with iron frame and brass strap fit... |
stage1-train-04267 | animal | I need a low-poly golden retriever puppy. | Asset: Golden retriever puppy
Triangle budget: 700
Brief: Sitting puppy facing +Z: plump rounded body on haunches, oversized round head with a short blunt ivory muzzle and small dark nose, two floppy ears hanging beside the cheeks, thick tail curled up behind, front legs straight down and two broad hind paws flat on th... |
stage1-train-04268 | plant or nature | I need a low-poly amethyst geode. | Asset: Cracked amethyst geode
Triangle budget: 500
Brief: Geode split open and standing with the cavity facing +Z: a rough grey stone shell with a jagged broken rim, and a cluster of pointed flat purple crystals rising out of the hollow interior. Outer shell iron grey, crystals flat violet with a few pale tips.
Require... |
stage1-train-04269 | plant or nature | I need a low-poly purple carrot. | Asset: Purple carrot
Triangle budget: 300
Brief: Upright carrot standing on its pointed tip at y=0: tapered deep-purple root with a rounded shoulder, short sage-green crown, and five flat strap leaves fanned up and out. Single flat purple for the root, sage for foliage; surface gently faceted, no rings of texture.
Requ... |
stage1-train-04270 | plant or nature | I need a low-poly eggplant. | Asset: Glossy eggplant
Triangle budget: 300
Brief: Ripe eggplant standing upright, bulbous at the bottom and tapering to the top, leaning very slightly; deep purple flat-shaded body with a sage star-shaped calyx cap and a short darkWood stalk. Sits on the ground at y=0.
Required named parts: fruit_body, calyx, stem
``... |
stage1-train-04271 | plant or nature | Build a low-poly purple kohlrabi. | Asset: Purple kohlrabi
Triangle budget: 450
Brief: A whole kohlrabi standing on its round bulb: squashed globe of violet-purple bulb resting on the ground, a short pale cut stem stub on top, and three pale sage-green leaf stalks arcing up and outward from the stem, each ending in a simple flat leaf blade. Slightly irre... |
stage1-train-04272 | plant or nature | I need a low-poly plum with a stem and leaf. | Asset: Purple plum on stem
Triangle budget: 300
Brief: Single ripe plum: slightly squashed round body with a shallow vertical crease on the front, a short woody stem rising from the top dimple, one small leaf angled off the stem. Deep purple body, oak stem, sage leaf.
Required named parts: plum_body, stem, leaf
```jav... |
stage1-train-04273 | plant or nature | I need a low-poly purple prickly pear cactus. | Asset: Purple prickly pear
Triangle budget: 450
Brief: Purple prickly pear: flat oval pads thin in Z facing the viewer, one tall main pad rising from the ground with two smaller pads branching left and right at mid-height, each pad edged with small spine tufts, and one egg-shaped fruit perched on the main pad's top edg... |
stage1-train-04274 | tool or gear | I need a low-poly push block for a woodshop set. | Asset: Wooden push block
Triangle budget: 300
Brief: Joiner's push block: a chunky rectangular oak block with a slightly tapered heel at the back (-Z), and a raised darkWood grip handle spanning the top on two short risers. Long axis along Z, front face +Z.
Required named parts: block_body, handle, riser_front, riser_b... |
stage1-train-04275 | vehicle | Build a low-poly push-pull railway coach. | Asset: Push-pull coach
Triangle budget: 900
Brief: Single railway coach with a driving cab at the +Z end, sitting on two visible bogies at ground level. Long sage-green body with a continuous ivory window band and a cab front carrying two windows; navy roof with a slight overhang, iron wheels, brass trim on the cab fro... |
stage1-train-04276 | tool or gear | I need a low-poly push stick. | Asset: Wooden push stick
Triangle budget: 250
Brief: Upright push stick: cylindrical oak handle at top, flat tapered darkWood body, and a notched hook foot at the bottom jutting toward +Z. Slight forward lean; handle and hook physically connected to the body.
Required named parts: handle, body, hook
```javascript
func... |
stage1-train-04277 | vehicle | Build a low-poly pusher plane. | Asset: Pusher plane
Triangle budget: 900
Brief: Small pusher-prop aircraft: cigar fuselage with cockpit canopy at the front, straight wings mid-body, engine pod mounted behind the cockpit with a propeller disc at the rear, twin tail booms and fin, three small wheels. Ivory fuselage with iron wings and brass propeller.
... |
stage1-train-04278 | vehicle | Build a low-poly pusher tug boat. | Asset: Low pusher tug
Triangle budget: 800
Brief: Stubby pusher tug floating with waterline at y=0: wide navy hull with a blunt squared bow, raised ivory wheelhouse set aft with dark window band, short iron funnel behind it, and a pair of dark wooden push knees on the front (+Z) face of the hull. Flat-decked, no scener... |
stage1-train-04279 | tool or gear | I need a low-poly pushpin. | Asset: Brass pushpin
Triangle budget: 250
Brief: Thumbtack standing spike-down: a shallow domed round head with a small flared rim, and a single tapered pin spike pointing straight down from the head's centre. Brass head, iron pin. Front faces +Z, spike tip at ground level.
Required named parts: head, pin
```javascrip... |
stage1-train-04280 | tool or gear | I need a low-poly putty knife. | Asset: Putty knife
Triangle budget: 200
Brief: Flexible putty knife lying flat: thin tapered iron blade pointing +Z with a slightly flared tip, a narrow brass ferrule, and a short rounded oak handle at the back (-Z). Blade nearly flush with the ground, handle thicker for grip.
Required named parts: blade, ferrule, hand... |
stage1-train-04281 | animal | I need a low-poly pygmy hippo. | Asset: Rounded pygmy hippo
Triangle budget: 650
Brief: Standing pygmy hippo facing +Z: barrel-shaped body held low on four short stubby legs, a broad heavy head slung forward with a wide rounded muzzle, two tiny round ears, and a short tapered tail. Body in iron grey, muzzle and inner ears in dark wood brown.
Required ... |
stage1-train-04282 | architecture | Build a low-poly pyramid skyscraper. | Asset: Stepped pyramid tower
Triangle budget: 700
Brief: Square tower rising in four stepped setbacks to a narrow crown, with a brass spire on top; each setback is a flat-shaded box, the upper ones smaller, iron window bands inset on all four faces. Sits on the ground at y=0, front face +Z.
Required named parts: base_t... |
stage1-train-04283 | vehicle | Build a low-poly quadricycle. | Asset: Four-wheeled quadricycle
Triangle budget: 850
Brief: Small four-wheel pedal quadricycle facing +Z: boxy open chassis with a bench seat, four chunky wheels on stub axles at the corners, upright steering column with a handlebar at the front, thin brass foot pedals between the front wheels. Iron frame, oak seat, na... |
stage1-train-04284 | fantasy or game | Build a low-poly four-legged scout robot. | Asset: Quadruped scout robot
Triangle budget: 850
Brief: Compact quadruped drone: boxy iron chassis with a slight forward lean, a low wedge head at the front with a single round ivory sensor lens, four thin navy legs in a wide stance — upper segment angled out, lower segment going straight down to flat brass foot pads.... |
stage1-train-04285 | architecture | Build a low-poly quail house. | Asset: Little quail house
Triangle budget: 400
Brief: Small coop standing at ground level: boxy oak body with a sloped darkWood gable roof, a round entrance hole in the front face with a small perch bar below it. Ivory trim board along the roof edge.
Required named parts: body, roof, entrance_hole, perch
```javascript... |
stage1-train-04286 | bird, sea creature or bug | Build a low-poly quaker parrot. | Asset: Quaker parrot
Triangle budget: 500
Brief: Stocky perched parrot standing upright, facing +Z: plump sage-green body, rounded head with a pale grey face patch and small hooked beak, folded wings along both flanks, long navy tail angling down behind, two iron feet gripping forward. Sage green body, iron-grey face, ... |
stage1-train-04287 | plant or nature | Build a low-poly quaking aspen tree. | Asset: Slender quaking aspen
Triangle budget: 650
Brief: Tall, slim aspen: one pale ivory trunk tapering upward with a few dark bark scar patches, two short upward branches near the crown, and a loose rounded canopy of three stacked flat-shaded sage clumps. Upright, facing +Z.
Required named parts: trunk, scar_patch_1,... |
stage1-train-04288 | architecture | Build a low-poly quarry crusher house. | Asset: Weathered crusher house
Triangle budget: 900
Brief: Squat industrial building: rectangular stone-walled shell with a steep gabled roof, a tall chute tower rising at one side, an open dark doorway on the front (+Z) and a hopper box on the roof peak feeding down. Sage-grey stone, darkWood timber, iron roof.
Requir... |
stage1-train-04289 | tool or gear | Build a low-poly quartz dilatometer. | Asset: Bench quartz dilatometer
Triangle budget: 650
Brief: Bench instrument facing +Z: a flat iron base plate, a short upright stand holding a horizontal quartz tube forward along Z, a slim push rod through the tube to a round ivory dial gauge mounted on the stand, plus a small brass sample collar at the tube's front ... |
stage1-train-04290 | fantasy or game | Build a low-poly quartz crystal point. | Asset: Pale quartz cluster
Triangle budget: 400
Brief: Quartz cluster growing upright: a tall six-sided prism with a pyramidal point, flanked by two shorter tilted crystals of the same shape, all fused into a small dark rock matrix at the ground so nothing floats. Ivory crystal faces with a faint sage-grey matrix.
Requ... |
stage1-train-04291 | plant or nature | I need a low-poly quartz-veined boulder. | Asset: Quartz-veined boulder
Triangle budget: 400
Brief: Angular faceted boulder, wider than tall, resting flat on the ground with two smaller chunks fused to its flanks. Thin ivory quartz veins run proud across the front face and up over the top, branching once. Iron-grey stone with ivory veins.
Required named parts: ... |
stage1-train-04292 | plant or nature | Build a low-poly quartzite boulder. | Asset: Angular quartzite boulder
Triangle budget: 400
Brief: Squat irregular boulder, wider than tall, with 6-8 flat angular facets and a chipped upper corner; two smaller rock fragments resting against its base. Ivory stone with iron-grey shadowed planes.
Required named parts: boulder_main, boulder_chip_1, boulder_chi... |
stage1-train-04293 | architecture | I need a low-poly quay wall segment. | Asset: Weathered quay wall
Triangle budget: 700
Brief: A short stone quay wall block facing +Z, built from chunky flat-shaded courses with a slightly overhanging ivory-grey coping stone along the top; two dark iron bollards stand on the coping with a brass mooring ring hanging from one, and a rusted iron ladder rung pa... |
stage1-train-04294 | plant or nature | Build a low-poly queen palm tree. | Asset: Queen palm
Triangle budget: 700
Brief: Upright palm: a slender trunk of stacked ringed segments, slightly bowed, topped by a crown of six long flat arching fronds radiating outward and drooping; a small cluster of dark round nuts sits under the crown. Sage fronds, oak trunk with darkWood rings.
Required named pa... |
stage1-train-04295 | architecture | Build a low-poly quenching tower. | Asset: Timber quenching tower
Triangle budget: 650
Brief: Small square timber tower: four splayed oak legs braced by crossed dark-wood struts, a squat iron-hooped water tank on top, and a brass spout pouring forward (+Z) into a shallow trough at the front. Front faces +Z, legs on ground.
Required named parts: leg_1, le... |
stage1-train-04296 | prop | I need a low-poly queue barrier. | Asset: Retractable queue barrier
Triangle budget: 350
Brief: Belt stanchion: round weighted base, slender iron post with a drum housing at the top, a flat belt extending back (-Z) from the drum to a small clip. Iron post and base, brass top drum, navy belt.
Required named parts: base, post, belt_housing, belt, belt_cli... |
stage1-train-04297 | container or food | Build a low-poly quiche in its pan. | Asset: Quiche pan with baked quiche
Triangle budget: 350
Brief: Round shallow quiche pan seen slightly from above, a fluted ivory-pastry crust ring nestled inside the iron rim, and a flat golden filling disc set just below the crust edge. Pan sits flat with the rim facing +Y; no handles.
Required named parts: pan_base,... |
stage1-train-04298 | tool or gear | I need a low-poly quick bar clamp. | Asset: Quick bar clamp
Triangle budget: 400
Brief: Trigger-style bar clamp laid flat with the bar running along Z: a long iron bar, a fixed jaw at the front, a sliding jaw with a lever handle beneath it, and two flat ivory pressure pads facing each other across the gap. Front jaw faces +Z.
Required named parts: bar, ja... |
stage1-train-04299 | tool or gear | Build a low-poly quick-release bar clamp. | Asset: Quick-release clamp
Triangle budget: 450
Brief: Trigger-release bar clamp lying flat: long iron bar, fixed jaw with ivory pad at the front (+Z), sliding jaw with a rust-coloured release trigger and a darkWood grip handle underneath, all parts touching the bar.
Required named parts: bar, jaw_fixed, jaw_sliding, p... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.