id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-04500 | plant or nature | Build a low-poly romanesco broccoli. | Asset: Romanesco head
Triangle budget: 700
Brief: Upright romanesco head: short ivory stalk at the base, then a stepped conical dome built from three concentric tiers of small pointed florets spiralling inward, topped by a single apex floret. Sage-green florets with ivory tips at each point.
Required named parts: stalk... |
stage1-train-04501 | architecture | Build a low-poly Romanesque church. | Asset: Romanesque chapel
Triangle budget: 900
Brief: Small stone chapel facing +Z: boxy nave with a steep gable roof, a semicircular apse at the rear, a square bell tower rising beside the front with a pyramidal cap, one arched ivory door and a few small arched windows. Grey-stone body with darkWood roof and tower cap,... |
stage1-train-04502 | architecture | I need a low-poly rooftop parking deck. | Asset: Rooftop parking deck
Triangle budget: 800
Brief: Elevated open-air deck: flat ivory slab held up on four stout columns, low iron parapet along the back and both sides leaving the front open, a short entry ramp meeting the front edge, and a square stair core box at the rear corner. Front faces +Z; deck sits well ... |
stage1-train-04503 | architecture | Build a low-poly rooftop terrace pavilion. | Asset: Rooftop terrace pavilion
Triangle budget: 900
Brief: Small square open pavilion: raised plank deck, four corner posts, a shallow hipped roof with overhanging eaves, and a low railing on the back and side edges leaving the front (+Z) open. Oak structure with darkWood roof.
Required named parts: deck, post_front_l... |
stage1-train-04504 | architecture | Build a low-poly rooftop water tank. | Asset: Wooden rooftop water tank
Triangle budget: 700
Brief: Stave-built wooden water tank: squat cylinder of vertical oak staves with two darkWood hoop bands, a shallow conical roof on top, four short splayed support legs beneath, and a small brass outlet pipe at the base front. Sits with legs on ground at y=0.
Requir... |
stage1-train-04505 | furniture | I need a low-poly folding room divider. | Asset: Folding room divider
Triangle budget: 700
Brief: Three-panel folding screen standing in a zigzag so it self-supports, each panel a rectangular oak frame with an inset flat sage panel; small brass hinges join the panels at the vertical stiles. Panels roughly waist-to-shoulder height, facing +Z.
Required named par... |
stage1-train-04506 | plant or nature | Build a low-poly root ball with exposed roots. | Asset: Uprooted root ball
Triangle budget: 350
Brief: A rounded clump of dark soil sitting on the ground, four chunky oak root fingers curling outward and down around its lower half, and a short splintered trunk stub rising from the top. No foliage; ball sits directly at y=0.
Required named parts: root_ball, trunk_stub... |
stage1-train-04507 | plant or nature | Build a low-poly rock with roots growing over it. | Asset: Root-covered boulder
Triangle budget: 400
Brief: Angular boulder sitting on the ground, broad and slightly tilted, with three gnarled roots creeping over its top and down the front, plus a sage moss patch on one shoulder. Iron-grey stone, darkWood roots.
Required named parts: rock, root_1, root_2, root_3, moss
... |
stage1-train-04508 | tool or gear | I need a low-poly root extractor tool. | Asset: Weathered root extractor
Triangle budget: 400
Brief: Upright weeding tool standing on its claw: a T-handle of oak with an iron crossbar through the grip's top, a straight iron shaft running down, a brass ferrule at the collar, and three short splayed iron prongs curving down to touch the ground. Slight lean is f... |
stage1-train-04509 | plant or nature | Build a low-poly knot of roots. | Asset: Gnarled root tangle
Triangle budget: 500
Brief: A low twist of exposed roots surfacing from the ground: three thick arcs arching up and knuckling over each other, one short broken stub, and a top knot where the arcs cross. Oak wood with darker bark ridges.
Required named parts: root_arc_1, root_arc_2, root_arc_3... |
stage1-train-04510 | plant or nature | Build a low-poly fallen log with roots. | Asset: Mossy rooted log
Triangle budget: 500
Brief: Fallen log lying along X: a thick eight-sided trunk with a raised root flare at one end, two or three flat root fins splaying outward, and a couple of short broken stub branches on top. Oak bark with a sage moss patch along the upper side.
Required named parts: trunk,... |
stage1-train-04511 | plant or nature | Build a low-poly rooted stump. | Asset: Rooted oak stump
Triangle budget: 400
Brief: Chopped oak stump standing on ground, slightly wider at the base, with four thick gnarled roots splaying outward along the ground and a pale ivory cut face on top showing rings. A sage moss patch clings to one side; darkWood bark tones.
Required named parts: stump_bod... |
stage1-train-04512 | prop | I need a low-poly rope fender. | Asset: Coiled rope fender
Triangle budget: 400
Brief: Hanging rope fender standing on the ground: fat vertical barrel-shaped coil of rope, slightly tapered at top and bottom, a rope loop rising from the top, two brass binding bands wrapping the coil. Ivory rope with brass bands.
Required named parts: loop_top, coil, ba... |
stage1-train-04513 | furniture | I need a low-poly rope hammock. | Asset: Rope hammock on a stand
Triangle budget: 750
Brief: Hammock slung in a wooden stand: two arched A-frame posts on ground rails, spreader bars at each end, a sagging rope bed between them, hanging ropes from bed ends to the posts. Oak frame, ivory ropes.
Required named parts: frame_base_left, frame_base_right, pos... |
stage1-train-04514 | prop | I need a low-poly rope swing. | Asset: Rope swing
Triangle budget: 350
Brief: Hanging swing: horizontal oak plank seat, two dark rope strands rising from its ends to a short top crossbar that holds them together. Straight-on, seat level, ropes vertical.
Required named parts: seat, rope_left, rope_right, crossbar
```javascript
function buildAsset(THR... |
stage1-train-04515 | furniture | Build a low-poly rope swing seat. | Asset: Rope swing seat
Triangle budget: 400
Brief: Hanging swing: a flat oak plank seat with slightly rounded ends, two twisted ropes rising from holes near each end, each rope ending in a small looped iron ring at the top. Seat level, ropes straight up, front faces +Z.
Required named parts: seat_plank, rope_left, rope... |
stage1-train-04516 | plant or nature | I need a low-poly rose hip on a stem. | Asset: Ripe rose hip
Triangle budget: 300
Brief: A single upright rose hip sprig rising from the ground: a thin sage stem with two small thorns, one oval rust-red hip hanging to the side near the top, and two sage leaves angled out lower down. A tiny darkWood calyx tuft caps the hip.
Required named parts: stem, hip, le... |
stage1-train-04517 | plant or nature | Build a low-poly rose quartz crystal cluster. | Asset: Rose quartz chunk
Triangle budget: 350
Brief: A faceted rose quartz cluster: one large upright hexagonal prism crystal with a pointed tip, tilted slightly, with two smaller angled crystals leaning against its base and small angular rubble shards. Soft pink faces with a paler ivory-tinted tip.
Required named part... |
stage1-train-04518 | bird, sea creature or bug | I need a low-poly spoonbill. | Asset: Roseate spoonbill
Triangle budget: 650
Brief: Standing wading bird facing +Z: egg-shaped body held high on two long thin legs, long S-curved neck rising to a small head, long flat spatula bill tilted down at the tip, folded wing panels on each flank, short tail at -Z. Soft pink body with darker pink wings, ivory... |
stage1-train-04519 | tool or gear | Build a low-poly rotary cutter. | Asset: Rotary cutter
Triangle budget: 350
Brief: Fabric rotary cutter held upright: short oak handle rising from a brass pivot collar, a flat iron disc blade vertical and facing +Z, and a curved iron finger guard hugging the blade's top edge. Everything joins at the central axle.
Required named parts: handle, blade, gu... |
stage1-train-04520 | tool or gear | Build a low-poly rotary sprinkler. | Asset: Rotary lawn sprinkler
Triangle budget: 350
Brief: Garden rotary sprinkler: flat iron base plate with a short upright brass body, two horizontal sprinkler arms spinning from the top hub, each ending in an angled nozzle, and a small brass cap on top. Front faces +Z, everything stacked and connected.
Required named... |
stage1-train-04521 | tool or gear | Build a low-poly rotary tool. | Asset: Corded rotary tool
Triangle budget: 350
Brief: Handheld rotary tool lying horizontally, nose pointing +Z: cylindrical navy body with ribbed grip band, iron nose collar, small brass bit protruding, short cord stub curling from the back (-Z).
Required named parts: body, grip_band, nose_collar, bit, cord
```javasc... |
stage1-train-04522 | tool or gear | I need a low-poly rotational viscometer for a lab bench. | Asset: Bench rotational viscometer
Triangle budget: 500
Brief: Benchtop rotational viscometer facing +Z: flat heavy base, short upright column at the back, boxy head housing on top carrying a downward spindle with a small disc rotor, plus a front display panel and one control knob. Iron body, ivory panel, brass spindle... |
stage1-train-04523 | vehicle | Build a low-poly helicopter. | Asset: Little rotorcraft
Triangle budget: 750
Brief: Small helicopter facing +Z: rounded teardrop fuselage with an ivory canopy at the nose, a thin tail boom stretching back (-Z) to a small vertical tail fin with a side-mounted tail rotor, a short mast carrying two flat main rotor blades, and two iron skids joined by c... |
stage1-train-04524 | plant or nature | Build a low-poly fallen log. | Asset: Mossy rotting log
Triangle budget: 500
Brief: Fallen log lying along the X axis, thick oak trunk with a snapped hollow end on the right, a few flat bark ridge plates, a sage moss patch on top, and two small ivory mushrooms sprouting from the side.
Required named parts: log_body, hollow_end, bark_ridge_1, bark_ri... |
stage1-train-04525 | plant or nature | Build a low-poly rotting stump. | Asset: Rotting stump
Triangle budget: 500
Brief: Decayed tree stump: short wide trunk tapering slightly upward, jagged split top with a shallow hollow, three buttress roots spreading to the ground, a sage moss patch on one shoulder and a rust-hued soft rot notch on the front. Dark wood body.
Required named parts: stump... |
stage1-train-04526 | animal | Build a low-poly rottweiler. | Asset: Rottweiler
Triangle budget: 700
Brief: Standing stocky dog facing +Z: broad deep chest and blocky body, heavy head with short blunt muzzle, small folded ears, four straight sturdy legs, short docked tail. Black coat with rust muzzle, chest and lower legs.
Required named parts: body, head, muzzle, ear_left, ear_r... |
stage1-train-04527 | plant or nature | Build a low-poly gemstone cluster. | Asset: Rough gemstone cluster
Triangle budget: 400
Brief: Loose cluster of angular crystals sprouting from a common centre at ground level: one tall upright shard, two medium shards leaning outward left and right, and three small stubby shards at the front. Faceted flat planes, sage and iron tones with brass glints.
Re... |
stage1-train-04528 | tool or gear | Build a low-poly woodturning roughing gouge. | Asset: Roughing gouge
Triangle budget: 350
Brief: Woodturning gouge lying flat on the ground pointing +Z: chunky oak handle at the back, a brass ferrule, then a short iron shaft ending in a wide U-shaped fluted cutting tip. Handle is the fattest part, shaft tapering and slightly narrower.
Required named parts: handle, ... |
stage1-train-04529 | architecture | Build a low-poly round amazon hut. | Asset: Thatched round hut
Triangle budget: 750
Brief: Round hut with a cylindrical ivory-plastered wall drum on the ground, a tall conical thatch roof in oak overhanging the wall, and a darkWood door panel set into the front (+Z) wall. A short darkWood finial caps the roof peak.
Required named parts: wall, roof, door, ... |
stage1-train-04530 | vehicle | I need a low-poly round baler. | Asset: Round baler
Triangle budget: 750
Brief: Towed round baler: big barrel-like bale chamber lying across the width, hinged tailgate at the back (-Z), low pickup reel with tines at the front bottom and a drawbar tongue running forward +Z, two tall wheels flanking the chamber, small jack stand under the tongue. Navy a... |
stage1-train-04531 | architecture | Build a low-poly round barn. | Asset: Round barn
Triangle budget: 900
Brief: Circular barn: low stone base ring, ten-sided oak wall drum with vertical plank feel, tall conical darkWood roof, small square ivory cupola on top, arched door facing +Z, two small windows flanking it. Brass door hardware.
Required named parts: base, wall, roof, cupola, doo... |
stage1-train-04532 | architecture | Build a low-poly round bastion tower. | Asset: Round stone bastion
Triangle budget: 900
Brief: Cylindrical stone tower (10-12 sides) rising from a slightly wider splayed footing, flat crenellated parapet at the top with a ring of merlons around the rim, a dark arched doorway at the base facing +Z and two narrow arrow slits above it. Weathered grey stone with... |
stage1-train-04533 | fantasy or game | I need a low-poly round-bottom potion flask. | Asset: Wizard's round-bottom flask
Triangle budget: 500
Brief: A spherical glass flask cradled in a darkWood three-legged ring stand so it stands upright, narrow neck rising from the top of the bulb, tapered cork stopper plugging it. Sage-green potion fills the lower half of the bulb, glass panes left clear ivory.
Requ... |
stage1-train-04534 | architecture | I need a low-poly round church. | Asset: Round church
Triangle budget: 900
Brief: A cylindrical chapel: ivory drum-shaped nave walls with a tall navy conical roof, an oak arched door and small porch projecting at the front (+Z), and a brass finial with a small lantern cupola at the apex. Everything stacked and connected down to the ground.
Required nam... |
stage1-train-04535 | architecture | Build a low-poly round gasometer. | Asset: Riveted gasometer
Triangle budget: 900
Brief: Upright cylindrical gas holder: wide iron tank drum sitting on the ground, a narrower telescoping upper section capped by a shallow domed roof, four vertical guide-frame columns rising past the drum joined by a ring band, a slim ladder up one side and an inlet pipe c... |
stage1-train-04536 | bird, sea creature or bug | Build a low-poly round goby. | Asset: Round goby
Triangle budget: 500
Brief: Bottom-dwelling fish resting belly-down on the ground, front +Z: bulbous rounded head tapering to a slim tail, two separate dorsal fins along the back, wide fan pectoral fins splayed to the sides, blunt fanned tail fin. Olive-tan body with darker mottled patches, pale belly... |
stage1-train-04537 | plant or nature | I need a low-poly round stone. | Asset: Rounded marble stone
Triangle budget: 250
Brief: Smooth rounded boulder flattened slightly at the bottom, sitting on the ground at y=0. Faceted low-poly surface with a subtle pale marble band; mostly ivory-grey with a darker iron-toned seam. No plinth.
Required named parts: stone_body, stone_seam
```javascript
... |
stage1-train-04538 | container or food | I need a low-poly round mesh bag of potatoes. | Asset: Bulging potato sack
Triangle budget: 400
Brief: A plump onion-shaped burlap sack of potatoes, widest near the base and gathered into a narrow tied neck at the top, with two potatoes poking out of the open mouth. Ivory sack with darkWood tie; potatoes in oak and rust shades.
Required named parts: sack_body, neck_... |
stage1-train-04539 | furniture | Build a low-poly round mirror. | Asset: Round vanity mirror
Triangle budget: 400
Brief: Tabletop mirror: circular oak frame ring of 12 flat segments, a recessed navy reflective disc set inside it, a small brass finial at the top of the frame, and a short footed stand. Mirror face angled toward +Z.
Required named parts: frame, glass, finial, stand
```... |
stage1-train-04540 | architecture | Build a low-poly round mud hut. | Asset: Round mud hut
Triangle budget: 500
Brief: Circular mud-walled hut: squat cylinder of clay walls, wide conical thatch roof overhanging the walls, dark rectangular doorway recess facing +Z. Warm clay walls, straw-toned roof.
Required named parts: wall, roof, doorway
```javascript
function buildAsset(THREE) {
co... |
stage1-train-04541 | furniture | Build a low-poly round pouf. | Asset: Round pouf
Triangle budget: 400
Brief: Squat upholstered pouf: 10-sided drum body with a gently domed top, a flat seam band around the middle, small ivory button at the top centre, and three stubby oak feet underneath lifting it just off the ground. Sage fabric.
Required named parts: body, top_cushion, seam_band... |
stage1-train-04542 | plant or nature | Build a low-poly round stone planter. | Asset: Round stone planter
Triangle budget: 400
Brief: Squat cylindrical planter of stacked stone segments, slightly tapered with a thick rolled rim, filled with dark soil and a small clumped sage shrub. Front faces +Z, sitting on the ground.
Required named parts: planter_body, rim, soil, shrub
```javascript
function ... |
stage1-train-04543 | architecture | Build a low-poly round tower. | Asset: Mossy round tower
Triangle budget: 700
Brief: Upright cylindrical stone tower on a slightly wider battered base, tapering to a conical roof with a corbel ring beneath it. Arched oak door faces +Z, two narrow slit windows above; iron stone, rust roof, oak door.
Required named parts: base, shaft, corbel_ring, roof... |
stage1-train-04544 | architecture | Build a low-poly round turret. | Asset: Round stone turret
Triangle budget: 700
Brief: Cylindrical ivory stone tower with a steep navy conical roof and a small brass finial on top; three narrow slit windows spaced around the shaft and a dark wood arched door facing +Z; a shallow corbel ring flares slightly below the roof eaves.
Required named parts: t... |
stage1-train-04545 | plant or nature | I need a low-poly river stone. | Asset: Smooth river stone
Triangle budget: 200
Brief: A single flattened oval river stone resting flat on the ground, long axis along X, softly faceted from a low-poly sphere squashed vertically, with a smaller companion pebble tucked against its left side. Cool grey-blue iron tones, slightly darker on the lower half.
... |
stage1-train-04546 | tool or gear | I need a low-poly router bit. | Asset: Carbide router bit
Triangle budget: 350
Brief: Upright router bit standing on its shank: a slim iron cylinder at the base, a brass collar ring, then a wider fluted cutting head on top with three straight carbide flutes spaced around it and a small bearing nub at the tip. Front faces +Z, all parts stacked and tou... |
stage1-train-04547 | tool or gear | I need a low-poly hand router plane. | Asset: Old router plane
Triangle budget: 350
Brief: Hand router plane resting on its flat sole: a chunky darkWood body slab with two curved handles rising at the sides, a vertical iron post at the centre front holding a small flat iron cutter, and a brass adjuster knob on top. Sits flat on the ground, handles symmetric... |
stage1-train-04548 | furniture | I need a low-poly shelf for a wifi router. | Asset: Wall-mounted router shelf
Triangle budget: 350
Brief: Small wall shelf facing +Z: flat rectangular shelf board, upright back panel flush at -Z against the wall, two triangular side cheeks joining board to back panel, and a low front lip along the board's front edge to stop the router sliding off. Oak board with ... |
stage1-train-04549 | tool or gear | Build a low-poly row cover hoop. | Asset: Row cover hoop
Triangle budget: 250
Brief: Garden row-cover hoop: a single bent iron pipe arching over the row in the X–Y plane, its two straight ends driven into the ground at y=0, plus one thin cross-tie bar low across the arch for rigidity. Weathered dark iron with brass collars where the ties meet the pipe.
... |
stage1-train-04550 | architecture | Build a low-poly row of terraced houses. | Asset: Row house block
Triangle budget: 900
Brief: Three adjoining townhouses in a single street-facing block, front facing +Z: shared flat facade with stepped roofline variations, three front doors at ground level, evenly spaced windows in two rows, simple chimney stacks. Oak and ivory walls, navy roofs, darkWood door... |
stage1-train-04551 | plant or nature | I need a low-poly rowan tree. | Asset: Rowan tree
Triangle budget: 700
Brief: Slender rowan: upright tapered trunk with two short forked branches, three clustered flat-shaded foliage blobs above, and two small rust-red berry clusters hanging beneath the canopy. Oak trunk, sage leaves, rust berries.
Required named parts: trunk, branch_left, branch_rig... |
stage1-train-04552 | vehicle | Build a low-poly royal coach. | Asset: Royal coach
Triangle budget: 900
Brief: Ornate four-wheeled carriage facing +Z: boxy navy cabin with brass trim rails and a domed darkWood roof, small front wheels and larger rear wheels on two axles, an elevated driver's seat at the front, and a small step below the door. Wheels darkWood with brass hubs.
Requir... |
stage1-train-04553 | plant or nature | I need a low-poly royal palm tree. | Asset: Royal palm
Triangle budget: 850
Brief: Tall royal palm: slender tapered trunk with a smooth green crownshaft at the top, and 6 arching fronds radiating out and drooping at the tips, each a simple tapered blade. Trunk darkWood with a sage crownshaft and sage fronds. Grows straight up, no base plinth.
Required nam... |
stage1-train-04554 | tool or gear | Build a low-poly rubber air hose. | Asset: Coiled air hose
Triangle budget: 500
Brief: Coiled workshop air hose lying flat: a stack of flat torus loops in rubber black, one brass quick-release coupling at each free end, short iron fitting sleeves. Coil sits on the ground at y=0.
Required named parts: hose_coil, hose_end_1, hose_end_2, coupling_1, couplin... |
stage1-train-04555 | tool or gear | I need a low-poly rubber band ball. | Asset: Rubber band ball
Triangle budget: 400
Brief: A chunky faceted sphere built from layered rubber bands, slightly irregular rather than perfectly round, with a few raised band loops wrapping across the surface in different axes. Mostly rust and navy bands with a couple of sage and brass ones; sits on the ground.
Re... |
stage1-train-04556 | vehicle | Build a low-poly rubber-band plane. | Asset: Rubber-band toy plane
Triangle budget: 500
Brief: Simple balsa-and-paper toy plane facing +Z: slim stick fuselage with a long single main wing across the top, small tailplane and upright fin at the back, two-blade propeller at the nose with a visible rubber band loop running back along the fuselage. Ivory wings ... |
stage1-train-04557 | tool or gear | I need a low-poly rubber stamp. | Asset: Rubber stamp
Triangle budget: 300
Brief: Upright hand stamp: a turned wooden knob-handle with a narrow waist on top of a square wooden block, and a thin dark rubber pad fixed under the block's bottom face. Handle oak, block darkWood, pad iron; front faces +Z.
Required named parts: handle, handle_waist, block, ru... |
stage1-train-04558 | plant or nature | Build a low-poly rubber tree houseplant. | Asset: Potted rubber tree
Triangle budget: 550
Brief: Houseplant in a tapered pot: short upright dark trunk with a few stubby branches, broad glossy oval leaves fanning out and up in tiers, largest near the base. Rust pot, ivory soil rim, darkWood trunk, sage leaves.
Required named parts: pot, soil, trunk, branch_1, br... |
stage1-train-04559 | plant or nature | Build a low-poly rubber tree plant. | Asset: Potted rubber tree
Triangle budget: 550
Brief: Upright potted rubber tree: tapered rust pot at ground, slender darkWood trunk rising straight, a few short branches, and broad oval sage leaves fanning out with the largest near the top. Front faces +Z, leaves spread evenly around the stem.
Required named parts: po... |
stage1-train-04560 | tool or gear | I need a low-poly wheel chock. | Asset: Rubber wheel chock
Triangle budget: 300
Brief: Wedge-shaped rubber chock: a squat triangular prism rising toward the back (+Z) with a sloped face down to the ground at the front, plus two raised grip ribs on the slope and a small rope loop at the back. Black rubber with a rust stripe token.
Required named parts:... |
stage1-train-04561 | prop | I need a low-poly rugby ball prop. | Asset: Rugby ball
Triangle budget: 400
Brief: Oval rugby ball lying on the ground, long axis along X, four seam ridges running lengthwise; a stitched lace panel on top, slightly raised. Ivory body with darkWood seams and laces.
Required named parts: ball_body, seam_1, seam_2, seam_3, seam_4, lace_panel
```javascript
f... |
stage1-train-04562 | architecture | Build a low-poly ruined castle keep. | Asset: Ruined castle keep
Triangle budget: 900
Brief: Square stone keep with a jagged broken crown of uneven merlons at the top, one taller corner turret with a fallen-in rim, an arched dark doorway on the front (+Z) and two deep window slots. Cool grey stone with a few dark cracks and a small sage moss patch.
Required... |
stage1-train-04563 | architecture | Build a low-poly ruined cathedral. | Asset: Ruined cathedral
Triangle budget: 1100
Brief: Roofless ruined cathedral with a jagged broken nave, one surviving pointed arch between two piers, a tall hollow tower stub at the back with a brass bell, and a few low rubble blocks. Flat stone grey-iron walls.
Required named parts: nave_wall_left, nave_wall_right, ... |
stage1-train-04564 | architecture | I need a low-poly ruined chapel. | Asset: Ruined woodland chapel
Triangle budget: 700
Brief: A small abandoned chapel facing +Z: a front gable wall with a broken gothic doorway, a tall left side wall with an empty arched window, a lower crumbled right wall, and a back wall reduced to a stub, all rising from the ground; a jagged dark-wood roof fragment c... |
stage1-train-04565 | architecture | Build a low-poly ruined city wall section. | Asset: Crumbling city wall
Triangle budget: 650
Brief: A short section of thick stone city wall, straight run along X facing +Z, with a jagged broken top edge, one surviving taller tower stub at the left end, and a low rubble heap at the base. Sage-grey stone with darkWood beam stubs; broken, chipped silhouette.
Requir... |
stage1-train-04566 | architecture | Build a low-poly ruined gatehouse. | Asset: Ruined gatehouse
Triangle budget: 1000
Brief: Two broken stone towers flanking a gaping archway, passage running through along Z, jagged uneven tops with only a few crenellations left, a fallen lintel and rubble heap at the front base. Iron-grey stone with darkWood beam stubs and a scatter of ivory fallen blocks... |
stage1-train-04567 | architecture | Build a low-poly ruined mausoleum. | Asset: Crumbled mausoleum
Triangle budget: 900
Brief: A small stone tomb facing +Z: rectangular floor slab on the ground, four corner columns of uneven broken heights, two still carrying a jagged roof fragment at the front, a dark recessed doorway block at the back with a fallen lintel chunk leaning across it. Ivory st... |
stage1-train-04568 | architecture | Build a low-poly ruined mosque. | Asset: Ruined mosque
Triangle budget: 950
Brief: A small abandoned mosque: three ivory stone walls forming an open-fronted hall with a broken pointed arch in the +Z facade, a half-collapsed sage dome sitting on the walls, and a stubby minaret stump at the back corner. Loose rust and darkWood rubble chunks lean against ... |
stage1-train-04569 | architecture | Build a low-poly ruined stone barn. | Asset: Ruined stone barn
Triangle budget: 950
Brief: Small rectangular barn with thick stone walls, the long front wall (+Z) broken down to a jagged low parapet with a gaping doorway, a taller surviving corner and one gable end rising higher; roof mostly gone except a few charred beams leaning across the top. Cold sage... |
stage1-train-04570 | architecture | Build a low-poly ruined stone keep. | Asset: Ruined stone keep
Triangle budget: 1000
Brief: Square keep footprint with four thick stone walls at uneven broken heights, jagged stepped tops, a taller round corner tower at the front-left snapped off at a slant, and an arched doorway in the front wall. Flat grey stone with sage moss patches and a small rubble ... |
stage1-train-04571 | architecture | Build a low-poly ruined turret. | Asset: Ruined turret
Triangle budget: 900
Brief: Squat round stone turret with a jagged broken crown, sitting on a wider rubble footing at y=0. A dark wooden door on the front face (+Z), two tall slit windows, a broken stub of curtain wall attached at the back-left, and a ragged gallery rim partway up. Stone in iron gr... |
stage1-train-04572 | prop | I need a low-poly rum bottle. | Asset: Squat rum bottle
Triangle budget: 350
Brief: Stout bottle standing upright: rounded squarish body tapering to a short neck, small oak cork on top, a plain ivory label band wrapped around the belly and a thin brass neck ring. Glass in dark amber-brown, base flat at y=0, faces +Z.
Required named parts: body, neck,... |
stage1-train-04573 | prop | Build a low-poly rum keg prop. | Asset: Rum keg
Triangle budget: 500
Brief: Squat wooden keg standing upright: bulging staved barrel (oak) with three iron hoops (top, middle, bottom), a small brass tap on the front lower face, and a dark wooden bung on the top lid.
Required named parts: body, hoop_top, hoop_middle, hoop_bottom, tap, bung
```javascrip... |
stage1-train-04574 | vehicle | Build a low-poly runabout car. | Asset: Little runabout
Triangle budget: 900
Brief: Small open two-seater runabout facing +Z: rounded low body with a scooped cockpit opening, four wheels sunk into arches, a short sloped hood at the front, a small curved windshield and a stubby rear deck. Navy body with ivory seats and darkWood wheel spokes, iron bumpe... |
stage1-train-04575 | fantasy or game | I need a pair of low-poly rune dice for a fantasy game. | Asset: Carved rune dice
Triangle budget: 450
Brief: Two bone dice: one resting flat, the second tipped up and leaning against its neighbour, both cubes with chamfered edges. Shallow dark rune glyphs are carved into the top and front faces of each die, with a small brass inlay dot at each rune's centre. Ivory bodies, da... |
stage1-train-04576 | tool or gear | Build a low-poly rune-etched blade. | Asset: Rune-etched blade
Triangle budget: 500
Brief: Standing dagger, pommel on the ground at y=0, blade tip up and flat faces toward +Z: a tapered flat blade with a narrow lighter cutting edge along one side, a short brass crossguard, a wrapped dark-wood grip and a small pommel. Three small ivory rune marks sit inset ... |
stage1-train-04577 | fantasy or game | Build a low-poly runic dagger. | Asset: Runic dagger
Triangle budget: 450
Brief: Short fantasy dagger held blade-up: flat leaf-shaped blade with a central fuller, a small ivory rune inlay on the blade face, short crossguard, wrapped grip, rounded pommel. Blade and pommel iron, guard and rune brass/ivory, grip dark wood.
Required named parts: blade, fu... |
stage1-train-04578 | tool or gear | I need a low-poly runic hammer. | Asset: Rune-carved hammer
Triangle budget: 400
Brief: Ritual hammer standing upright: handle vertical with a flared darkwood pommel, blocky iron head across the top with a slightly flared striking face on each side, two thin brass bands pinning the handle under the head. Shallow carved angular grooves (simple chevron b... |
stage1-train-04579 | plant or nature | Build a low-poly runner bean pod. | Asset: Runner bean pod
Triangle budget: 250
Brief: One long slender runner bean pod lying on the ground at a slight curve, gently swelling over the beans inside and tapering to a pointed tip; a short dry stem stub at the other end. Sage green body, darkWood stem.
Required named parts: pod, stem_stub, pod_tip
```javasc... |
stage1-train-04580 | animal | Build a low-poly running hare. | Asset: Running hare
Triangle budget: 700
Brief: Mid-gallop hare: long body stretched nearly horizontal, head thrust forward (+Z), both ears swept back flat along the spine, hind legs extended far behind at full stretch, front legs reaching forward, short upright tail. Oak coat with darkWood ear tips and an ivory tail.
... |
stage1-train-04581 | prop | Build a low-poly running shoe. | Asset: Running shoe
Triangle budget: 500
Brief: Single trainer seen from the side, toe pointing +Z, flat sole on the ground with a slight toe upturn. Chunky ivory sole, rounded navy upper, rust heel counter, sage tongue, and a few short lace bars across the instep. Collar opening at the back top.
Required named parts: ... |
stage1-train-04582 | fantasy or game | Build a low-poly runway beacon for a fantasy game. | Asset: Runway beacon
Triangle budget: 500
Brief: A short iron tripod stand with three splayed legs on the ground, a slender post rising from a small base ring, topped by a brass cage lantern holding a glowing ivory crystal; a small dark cap crowns the lantern and tilts slightly. Faces +Z, all parts connected.
Required ... |
stage1-train-04583 | plant or nature | I need a low-poly potato. | Asset: Russet potato
Triangle budget: 300
Brief: A single oval potato lying on its side, lumpy and slightly flattened, longest axis along X, with a few shallow eye dimples at scattered points and one small sprouting bud at the shoulder. Earthy brown skin shading darker at the eyes.
Required named parts: body, eye_1, ey... |
stage1-train-04584 | fantasy or game | I need a low-poly rust monster for a fantasy game. | Asset: Rust monster
Triangle budget: 850
Brief: Hunched vermin-like creature, front-facing +Z: a segmented rust-red carapace arcing over a low-slung head with two feathery antennae thrust forward and two small black eyes. Six short banded iron legs under the body, and a long tail curling back (-Z) ending in a flanged c... |
stage1-train-04585 | fantasy or game | Build a low-poly rusted brazier. | Asset: Rusted brazier
Triangle budget: 450
Brief: Fantasy camp brazier: wide shallow iron bowl with a thick rim, three short splayed legs, a ring of glowing rust-orange coals heaped inside the bowl. Iron body, rust rim and coals.
Required named parts: bowl, rim, leg_1, leg_2, leg_3, coals
```javascript
function buildA... |
stage1-train-04586 | tool or gear | I need a low-poly rusted dirk. | Asset: Rusted dirk
Triangle budget: 350
Brief: Short single-edged dirk lying point-forward along +Z: flat tapered blade with a chipped edge in rust, small brass crossguard, darkwood grip, brass pommel cap. Slight patina, no sheath.
Required named parts: blade, guard, grip, pommel
```javascript
function buildAsset(THRE... |
stage1-train-04587 | tool or gear | I need a rusted low-poly helmet. | Asset: Rusted iron helmet
Triangle budget: 500
Brief: Old iron helmet sitting upright, brim at ground level: rounded domed crown, slightly flared brim, a narrow nose guard descending at the front (+Z), and three brass rivets spaced along the brim. Weathered rust body with dark iron trim.
Required named parts: dome, bri... |
stage1-train-04588 | tool or gear | I need a low-poly rusted longsword. | Asset: Rusted longsword
Triangle budget: 400
Brief: Display longsword standing point-down: long tapered blade with a central fuller ridge, tip resting on the ground, wide straight crossguard, wrapped grip, round pommel on top. Rust-coloured blade with darker pitting, iron guard and pommel, darkWood grip.
Required named... |
stage1-train-04589 | container or food | Build a low-poly rustic clay plate. | Asset: Rustic clay plate
Triangle budget: 300
Brief: Shallow round plate of twelve segments with a gently raised rim and a small foot ring underneath; terracotta body with a worn ivory glaze disc in the centre. Sits flat on the ground, top face up.
Required named parts: plate_bowl, rim, foot_ring
```javascript
functio... |
stage1-train-04590 | furniture | Build a low-poly rustic cupboard. | Asset: Rustic cupboard
Triangle budget: 550
Brief: Two-door cupboard stood upright facing +Z: boxy carcass with a slightly overhanging top, two panelled doors meeting at the centre with small brass knobs, low feet at the base. Oak body, darkWood trim, brass hardware.
Required named parts: carcass, top, door_left, door_... |
stage1-train-04591 | furniture | I need a low-poly rustic floor lamp. | Asset: Rustic floor lamp
Triangle budget: 300
Brief: Wooden floor lamp standing on a round flat foot: a straight oak pole rising with a small brass collar joint, topped by a tapered ivory shade (open trapezoid, wide at the bottom). Front faces +Z.
Required named parts: base, pole, collar, shade
```javascript
function ... |
stage1-train-04592 | furniture | I need a low-poly rustic sideboard. | Asset: Rustic sideboard
Triangle budget: 700
Brief: Two-door sideboard facing +Z: boxy oak carcass with a slightly overhanging flat top, two panel doors with brass knobs, four short square legs at the corners. Dark wood trim.
Required named parts: body, top, door_left, door_right, knob_left, knob_right, leg_1, leg_2, l... |
stage1-train-04593 | prop | I need a low-poly anchor. | Asset: Rusty admiralty anchor
Triangle budget: 550
Brief: Admiralty anchor standing upright, shank vertical, crown at the bottom with two curved arms ending in flat triangular flukes, horizontal stock crossing near the top of the shank, iron ring at the very top. Rust-brown with darker iron parts.
Required named parts:... |
stage1-train-04594 | vehicle | Build a low-poly rusty bicycle. | Asset: Rusty bicycle
Triangle budget: 700
Brief: Bicycle standing upright on both wheels, facing +Z, wheels as thin faceted discs with iron rims, axles along X. Rust-coloured tubular frame (triangle plus top tube), front fork, curved handlebar, darkWood saddle on a short seat post, small crank with two pedals between t... |
stage1-train-04595 | vehicle | Build a low-poly rusty cargo shuttle. | Asset: Rusty cargo shuttle
Triangle budget: 850
Brief: Blocky shuttle resting on ground: long boxy hull with a sloped ivory cockpit window at the front (+Z), a wider cargo pod slung on top, two stubby side engines with brass nozzles, and short landing skids underneath so it sits at y=0. Rust with iron and darkWood deta... |
stage1-train-04596 | architecture | Build a low-poly dockside crane with a bit of rust on it. | Asset: Rusty dockside crane
Triangle budget: 900
Brief: Small dockside crane: square iron base block, tall lattice-style mast (a few crossed struts), a jib boom angled up and forward (+Z) with a short counter-jib behind (-Z), a boxy cab on the mast side, and a hanging hook line. Weathered iron with rust patches, darkWo... |
stage1-train-04597 | vehicle | I need a low-poly rusty farm truck. | Asset: Rusty farm truck
Triangle budget: 1000
Brief: Old flatbed pickup facing +Z: boxy cab with a slanted windscreen, short hood in front, open flatbed behind with low side rails, four chunky wheels on simple axles. Body rust-orange with navy cab roof and ivory windscreen panes.
Required named parts: cab, hood, bed, r... |
stage1-train-04598 | vehicle | I need a low-poly rusty freighter. | Asset: Rusty freighter
Triangle budget: 950
Brief: Small cargo freighter floating level, bow toward +Z: long blunt hull with raised bow stem, flat deck with three boxy cargo hatches down the centreline, a boxy bridge cabin and a single funnel aft, thin mast at the bow. Rust-streaked navy hull with iron deck fittings.
R... |
stage1-train-04599 | fantasy or game | Build a low-poly rusty iron key. | Asset: Rusty iron key
Triangle budget: 400
Brief: Upright key standing on the tip of its shaft: an octagonal ring bow at the top, a slim vertical shaft with a raised collar band, and a notched bit stepping out at the bottom, just clearing the ground. Iron with rust-worn edges.
Required named parts: bow, shaft, collar, ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.