id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-05700 | container or food | I need a low-poly tuna can. | Asset: Tuna can
Triangle budget: 400
Brief: Sealed short tuna can standing upright: squat 12-sided cylinder with rolled rims top and bottom, a slightly recessed flat lid, a small pull-ring tab on the lid, and a paper label band wrapping the side. Iron metal with ivory label and a rust accent stripe.
Required named part... |
stage1-train-05701 | bird, sea creature or bug | I need a low-poly tunicate colony prop. | Asset: Bumpy tunicate colony
Triangle budget: 500
Brief: A mounded cluster of three plump bulbous sacs fused at the base, tallest lobe at the back, each lobe topped by a short raised siphon rim angled upward and forward (+Z). Rust and ivory lobes with sage siphon rims; no plinth, lobes sit flat on the ground.
Required ... |
stage1-train-05702 | bird, sea creature or bug | I need a low-poly turban shell. | Asset: Banded turban shell
Triangle budget: 500
Brief: Turban snail shell resting on its side: a chunky conical spire of stacked whorls tapering upward and back (-Z), a rounded body whorl in front (+Z) with a D-shaped aperture opening facing +Z and slightly down, a thickened ivory lip around the aperture. Rust shell wi... |
stage1-train-05703 | architecture | Build a low-poly turbine hall. | Asset: Turbine hall
Triangle budget: 1200
Brief: Long rectangular iron-framed hall with a row of sawtooth roof lights along the top, tall arched window bays down each long side, and two cylindrical turbine housings sitting on low plinths inside the open front bay. Navy-iron walls, ivory glazing, brass trim on the turbi... |
stage1-train-05704 | vehicle | I need a low-poly turboprop plane. | Asset: Little turboprop plane
Triangle budget: 900
Brief: Small single-engine turboprop: tapered fuselage with rounded nose, one straight low wing spanning both sides, single vertical tail fin with small horizontal stabilisers, four-blade propeller on the nose, tricycle landing gear with nose wheel and two main wheels.... |
stage1-train-05705 | architecture | Build a low-poly turf-roofed longhouse. | Asset: Turf-roofed longhouse
Triangle budget: 800
Brief: Viking longhouse: long rectangular oak-plank wall block, low-pitched turf roof with rounded grass-green edges overhanging the walls, dark wood corner posts and ridge beam, one centred front door. Front faces +Z.
Required named parts: walls, roof_turf, ridge_beam,... |
stage1-train-05706 | architecture | Build a low-poly turkey coop. | Asset: Raised turkey coop
Triangle budget: 700
Brief: Small slatted coop raised on four short legs, gable roof, open doorway on the +Z front with a hinged ramp running down to the ground, and a perch rail across the front. Oak and darkWood body with an iron latch and sage ramp rails.
Required named parts: body, roof, r... |
stage1-train-05707 | animal | I need a low-poly Turkish Angora cat. | Asset: White Turkish Angora
Triangle budget: 700
Brief: Standing long-haired cat, side-on with the wedge head turned forward (+Z): slim body, plumed tail raised and curling up behind, four straight legs with small paws, large upright pointed ears. Ivory coat with a faint sage-tinted tail and iron nose and eyes.
Require... |
stage1-train-05708 | animal | Build a low-poly Turkish Van cat. | Asset: Turkish Van cat
Triangle budget: 550
Brief: Sitting cat, upright chest, head facing +Z with pointed ears, front legs straight down to the ground, tail curled up behind along the back. Ivory coat with rust patches on the head and a rust-ringed tail.
Required named parts: body, head, ear_left, ear_right, leg_front... |
stage1-train-05709 | plant or nature | I need a low-poly turmeric root. | Asset: Turmeric root
Triangle budget: 400
Brief: A knobby turmeric rhizome lying horizontally: one thick curved main body with three shorter finger offshoots branching off at varying angles, each capped with a small rounded node bud. Matte ochre-orange skin with a slightly darker orange at the joints.
Required named pa... |
stage1-train-05710 | tool or gear | Build a low-poly turn coordinator instrument. | Asset: Brass-bezeled turn coordinator
Triangle budget: 400
Brief: Round aviation turn coordinator standing upright, face toward +Z and tilted slightly back on a short rear strut: iron cylindrical can, brass bezel ring, black dial face, a small ivory airplane silhouette on the dial's upper half, and a curved glass tube ... |
stage1-train-05711 | container or food | I need a low-poly turnover pastry. | Asset: Golden baked turnover
Triangle budget: 350
Brief: Half-moon folded turnover lying flat, domed top up and the crimped seam facing +Z. Golden crust with a darker toasted rim, two short vent slits cut into the dome, a small ivory filling ooze at the seam. Ground at y=0.
Required named parts: turnover_body, crimp_ed... |
stage1-train-05712 | prop | Build a low-poly turnstile. | Asset: Iron turnstile
Triangle budget: 400
Brief: Tripod turnstile: round stepped base, a short cylindrical housing at hip height, and three straight arms radiating out horizontally at 120 degrees from the housing hub, all above ground. Iron body with brass hub and arm tips; front faces +Z.
Required named parts: base, ... |
stage1-train-05713 | prop | I need a low-poly turntable deck. | Asset: Turntable deck
Triangle budget: 500
Brief: Sitting square-plinth record player, front +Z: flat darkWood plinth on the ground, round iron platter set into the top left with a black record and small brass spindle, brass tonearm arcing from the back-right corner over the record with an iron pivot, and a rust pitch ... |
stage1-train-05714 | plant or nature | Build a low-poly turquoise stone. | Asset: Turquoise stone
Triangle budget: 300
Brief: A single chunky turquoise stone resting on the ground, a squat irregular polyhedron with wide flat angled facets and a slightly domed top, flanked by two small companion pebbles. Flat-shaded turquoise with a hint of paler green on the upper facets.
Required named parts... |
stage1-train-05715 | animal | I need a low-poly tusked mastodon. | Asset: Tusked mastodon
Triangle budget: 900
Brief: Heavy quadruped facing +Z: tall domed head with a steep sloping back, short thick trunk hanging forward, two long ivory tusks curving up and out from the jaw, small rounded ears, four stout columnar legs and a short tail. Shaggy darkWood hide with oak highlights, ivory... |
stage1-train-05716 | animal | Build a low-poly tusked whale. | Asset: Tusked whale
Triangle budget: 500
Brief: Narwhal-style whale lying level with head facing +Z, body resting just above the ground, tapering to an upturned tail fluke. Single long ivory tusk projecting forward from the snout, two small side flippers angled down. Navy body, darkWood fluke, ivory tusk.
Required name... |
stage1-train-05717 | animal | I need a low-poly tuxedo cat. | Asset: Sitting tuxedo cat
Triangle budget: 650
Brief: American shorthair sitting upright and compact, front legs straight, tail curled around the haunch; rounded head with two triangular ears and a white muzzle. Black #242a29 coat, ivory #ead9b7 chest bib, muzzle and paw tips; brass eyes.
Required named parts: body, he... |
stage1-train-05718 | furniture | I need a low-poly TV stand. | Asset: Low TV stand
Triangle budget: 400
Brief: Wide low media cabinet: rectangular open frame with a thick top slab, a lower shelf, side panels, and four short square legs. Oak body with darkWood top edging.
Required named parts: top, shelf, side_left, side_right, leg_1, leg_2, leg_3, leg_4
```javascript
function bui... |
stage1-train-05719 | tool or gear | I need a low-poly pair of tweezers. | Asset: Fine tweezers
Triangle budget: 250
Brief: Small precision tweezers lying flat: a bent closed loop at the back joining two flat tapered arms that flare apart slightly then converge to fine tips at +Z. Iron with brass tips.
Required named parts: back_bend, arm_left, arm_right, tip_left, tip_right
```javascript
fu... |
stage1-train-05720 | fantasy or game | Build a low-poly twig broom for a fantasy game. | Asset: Witch's twig broom
Triangle budget: 400
Brief: Upright broom leaning slightly, standing on its twig tips: a slender oak handle running up +Y, a brass binding collar, and a splayed fan of gnarled darkWood twigs below it spreading to the ground. No bristles, twigs only.
Required named parts: handle, binding, twig_... |
stage1-train-05721 | bird, sea creature or bug | Build a low-poly twig nest. | Asset: Woven twig nest
Triangle budget: 450
Brief: Shallow open bowl of interlocking twigs, wider at the rim than the base, irregular rim heights, hollow inside with a soft ivory lining barely visible at the bottom. Twigs in oak and darkWood, a couple of pale twig tips for contrast. Sits flat at y=0, opening up, front ... |
stage1-train-05722 | vehicle | Build a low-poly twin-boom plane. | Asset: Twin-boom plane
Triangle budget: 900
Brief: Twin-boom aircraft with a stubby central nacelle facing +Z, propeller at the nose, one straight wing spanning both booms, two parallel booms trailing back (-Z) to a shared tailplane with a vertical fin at each boom's end. Ivory fuselage with navy booms and sage accents... |
stage1-train-05723 | architecture | Build a low-poly pair of twin chimneys. | Asset: Twin brick chimneys
Triangle budget: 500
Brief: Two square tapering brick stacks rising side by side from a shared low brick footing that joins them at the bottom, each topped with a wider flat iron cap; face +Z. Rust brick with ivory mortar bands and iron caps.
Required named parts: footing, stack_left, stack_r... |
stage1-train-05724 | vehicle | Build a low-poly twin-engine airliner. | Asset: Twin-engine airliner
Triangle budget: 1000
Brief: Small airliner facing +Z: long cylindrical ivory fuselage, swept navy wings spanning left and right, two iron nacelles slung under the wings, single navy tail fin plus small horizontal stabilizers at the rear, short black landing gear under nose and belly, dark c... |
stage1-train-05725 | prop | I need a low-poly twin street lamp. | Asset: Twin street lamp
Triangle budget: 650
Brief: Iron lamp post with a stepped base and tall post, capped by a vertical finial; two symmetric curved bracket arms reach left and right, each hanging a four-sided lantern head with ivory panes. Iron with brass trim.
Required named parts: base, post, finial, bracket_left... |
stage1-train-05726 | architecture | Build a low-poly twin tower block. | Asset: Twin tower block
Triangle budget: 700
Brief: Two slim rectangular towers standing side by side on the ground, the left slightly taller, joined by a short horizontal skybridge at mid height; flat roof caps and ivory window bands on navy facades. Faces +Z.
Required named parts: tower_left, tower_right, skybridge, ... |
stage1-train-05727 | tool or gear | I need a low-poly drill bit. | Asset: Twist drill bit
Triangle budget: 400
Brief: Twist drill standing upright: short plain cylindrical shank at the bottom, above it a fluted body with two helical grooves twisting around a central core, tapering to a sharp conical point at the top. Iron for the body and shank, black in the flute grooves for contrast... |
stage1-train-05728 | prop | Build a low-poly twist puzzle cube. | Asset: Twist puzzle cube
Triangle budget: 500
Brief: Solved 3x3 puzzle cube: chamfered body with slightly inset dark groove lines dividing each face into nine, six flat colour panels — ivory top, rust front, navy right, sage back, brass left, iron bottom. Front face +Z, resting on the ground.
Required named parts: body... |
stage1-train-05729 | plant or nature | Build a low-poly twisted log. | Asset: Twisted fallen log
Triangle budget: 400
Brief: A short gnarled log lying along the X axis on the ground, gently crooked rather than straight, with faceted bark ridges running lengthwise, one broken branch stub poking up, and a pale cut end face at the +X end. Dark wood bark, oak cut face.
Required named parts: l... |
stage1-train-05730 | plant or nature | Build a low-poly twisted olive tree. | Asset: Twisted olive tree
Triangle budget: 700
Brief: Gnarled olive: trunk leaning and kinking in two sharp elbow bends, flared root buttress at ground, splitting into two main limbs; four sage foliage clumps sit as flat-faceted clusters on the branch tips, one lower on the trunk. Oak wood, sage leaves.
Required named ... |
stage1-train-05731 | fantasy or game | Build a low-poly twisted root. | Asset: Gnarled twisted root
Triangle budget: 650
Brief: A gnarled root clump: short upright trunk stub at the top splitting into three twisted root limbs that curl out and press into the ground, one limb arching up over the others. Dark wood with an oak-toned knot bulge; a hollow knot hole on the front.
Required named ... |
stage1-train-05732 | vehicle | I need a low-poly two-door coupe car. | Asset: Sporty two-door coupe
Triangle budget: 900
Brief: Low two-door coupe facing +Z: wedge-shaped body with a tapered cabin set back over the rear axle, sloped windshield, four wheels tucked partly into the arches with dark tyres and brass hubs. Navy body, black tyres, ivory headlights.
Required named parts: body, ca... |
stage1-train-05733 | furniture | I need a low-poly filing cabinet. | Asset: Two-drawer filing cabinet
Triangle budget: 400
Brief: Upright two-drawer filing cabinet facing +Z: boxy iron carcass with a slim recessed plinth, two stacked drawer fronts with slight inset gaps, each with a brass bar handle centred. Flat sides, squared top.
Required named parts: carcass, plinth, drawer_top, dra... |
stage1-train-05734 | furniture | Build a low-poly two-drawer nightstand. | Asset: Oak two-drawer nightstand
Triangle budget: 700
Brief: Compact nightstand standing with its two drawer fronts facing +Z: a boxy oak carcass with a slightly overhanging top slab, four short square tapered legs, and two stacked drawers split by a thin darkWood rail, each with a single brass knob centred on the face... |
stage1-train-05735 | tool or gear | I need a low-poly two-handed claymore. | Asset: Two-handed claymore
Triangle budget: 450
Brief: Greatsword standing upright, tip up: long broad flat blade with a slight taper and a shallow tip, short ricasso above a wide crossguard whose two quillons slope down toward the blade, long two-hand grip below, and a round pommel at the bottom near the ground. Iron ... |
stage1-train-05736 | fantasy or game | I need a low-poly two-headed ettin. | Asset: Two-headed ettin
Triangle budget: 800
Brief: Squat hulking humanoid facing +Z: broad barrel torso on two short thick legs, two arms hanging wide, and two separate heads on short necks side by side above the shoulders, each with a jutting jaw. Sage-green skin, darkWood belt and a heavy darkWood club gripped in th... |
stage1-train-05737 | animal | I need a low-poly two-legged predator. | Asset: Raptor-like predator
Triangle budget: 700
Brief: Bipedal theropod: hunched oval body tilted forward, long stiff tail out the back (-Z) for balance, short neck to a wedge head with a blunt snout, two strong legs with feet flat on the ground, two small clawed forearms held close to the chest. Rust body with darkWo... |
stage1-train-05738 | furniture | I need a low-poly two-seat loveseat. | Asset: Two-seat loveseat
Triangle budget: 700
Brief: Compact loveseat facing +Z: boxy upholstered frame with two seat cushions, a low back with two back cushions, and two flat arms; four short stubby legs. Sage upholstery with oak legs.
Required named parts: frame, seat_cushion_left, seat_cushion_right, back, arm_left,... |
stage1-train-05739 | prop | I need a low-poly bike rack. | Asset: U-shaped bike rack
Triangle budget: 300
Brief: Inverted-U bike rack: two vertical iron tubes rising from round base flanges seated on the ground, joined by a single horizontal crossbar with rounded bends. Flat iron finish, front faces +Z.
Required named parts: upright_left, upright_right, crossbar, flange_left, ... |
stage1-train-05740 | bird, sea creature or bug | I need a low-poly uaru cichlid fish. | Asset: Uaru cichlid
Triangle budget: 550
Brief: Deep oval-bodied cichlid facing +Z, tall flat sides, slightly downturned snout, fan tail fin, long dorsal and anal fins running the body length, two small pectoral fins on the flanks, round eyes. Dark iron-navy body with black blotches, brass eye rings.
Required named par... |
stage1-train-05741 | prop | Build a low-poly set of uilleann pipes. | Asset: Uilleann pipes
Triangle budget: 700
Brief: A set of uilleann pipes resting upright: dark wood chanter hanging down the front, three drones rising back over the top, a regulator laid across the front with brass keys, black leather bag beneath and bellows folded at the left. Ivory mounts on the pipe ends.
Required... |
stage1-train-05742 | vehicle | Build a low-poly ultralight plane. | Asset: Open-frame ultralight plane
Triangle budget: 850
Brief: Nose faces +Z: stubby pod fuselage with an exposed seat, a single high wing on two short struts above it, a slim tail boom running back (-Z) to a small horizontal stabilizer and upright fin, and a two-blade propeller disc at the nose. Tricycle gear: two mai... |
stage1-train-05743 | tool or gear | I need a low-poly ultrasonic cleaner. | Asset: Compact ultrasonic cleaner
Triangle budget: 400
Brief: Bench-top ultrasonic cleaner: boxy iron tank body with a flat lid on top and a small ivory lid handle, front navy control panel carrying a round brass dial and two small buttons, four short black feet at the corners. Front faces +Z, feet on ground.
Required ... |
stage1-train-05744 | plant or nature | Build a low-poly umbrella thorn acacia. | Asset: Flat-topped acacia
Triangle budget: 450
Brief: Savanna acacia: short leaning oak trunk that splits into two or three branches, spreading into a wide flat-topped disc of sage-green foliage; the canopy sits high and shallow, wider than it is tall. Front faces +Z.
Required named parts: trunk, branch_1, branch_2, br... |
stage1-train-05745 | vehicle | Build a low-poly umiak. | Asset: Skin umiak
Triangle budget: 700
Brief: Open skin-on-frame boat, long axis along Z with the pointed bow at +Z, sitting level at y=0. Ivory stretched-skin hull with a hollow open top, two darkWood gunwale rails along the rim, three darkWood cross ribs inside, one thwart seat near the stern. Slight upward curve at ... |
stage1-train-05746 | furniture | I need a low-poly under-counter freezer. | Asset: Under-counter chest freezer
Triangle budget: 400
Brief: Low chest freezer sitting at counter height: a boxy ivory cabinet with a slightly overhanging flat lid on top, hinges at the back, a slim brass pull handle across the lid's front edge, four short black feet. Front faces +Z.
Required named parts: cabinet, li... |
stage1-train-05747 | furniture | I need a low-poly under-desk storage box. | Asset: Sage storage box
Triangle budget: 400
Brief: Shallow open-top storage box, wider than tall, sides slightly tapered inward at the bottom, front facing +Z; a thin oak rim runs around the open top and two brass grip plates sit on the left and right ends, with two dark wood skid rails underneath so it slides out.
Re... |
stage1-train-05748 | furniture | I need a low-poly under-sink cabinet. | Asset: Under-sink cabinet
Triangle budget: 500
Brief: Kitchen base cabinet, front facing +Z: rectangular oak carcass with a shallow ivory countertop slab, open recess at the back top where the sink drops in, two sage doors side by side with brass knobs, and a recessed darkWood plinth at the floor. Doors sit slightly pr... |
stage1-train-05749 | furniture | I need a low-poly undermount sink. | Asset: Undermount sink
Triangle budget: 500
Brief: Undermount sink: a shallow rectangular basin with slightly tapered walls, a thin flat rim flange around the top edge, a brass faucet centred at the back with a curved spout and two lever handles, and a small round iron drain in the basin floor. Open top, faces +Z.
Requ... |
stage1-train-05750 | fantasy or game | I need a low-poly unicorn horn. | Asset: Polished unicorn horn
Triangle budget: 400
Brief: Upright tapered horn standing on a brass collar at the ground, rising in three stacked sections each twisted slightly about Y to read as a spiral ridge, ending in a sharp ivory tip. Ivory shaft, brass collar.
Required named parts: base_collar, shaft_lower, shaft_... |
stage1-train-05751 | architecture | Build a low-poly university building. | Asset: Compact university hall
Triangle budget: 800
Brief: Small classical campus hall facing +Z: rectangular ivory main block with a hipped navy roof, centred entrance with two columns, a triangular pediment, and a short flight of steps. Symmetrical rows of small windows across the front and sides.
Required named part... |
stage1-train-05752 | vehicle | I need a low-poly unmarked police car. | Asset: Unmarked police car
Triangle budget: 800
Brief: Plain dark-navy sedan facing +Z: low slab body with a slightly tapered cabin, four chunky black wheels, ivory glazing band around the cabin, and a small low-profile beacon puck on the roof centre — no lettering. Iron trim bumpers.
Required named parts: body, cabin,... |
stage1-train-05753 | prop | Build a low-poly upright piano. | Asset: Upright piano
Triangle budget: 450
Brief: Compact upright piano facing +Z: tall rectangular dark oak case, recessed ivory keyboard shelf with a black key strip, small brass pedals at the base, two short front legs, hinged flat top lid.
Required named parts: case, keyboard, key_strip, top_lid, leg_left, leg_right... |
stage1-train-05754 | prop | I need a low-poly USB flash drive. | Asset: Pocket USB flash drive
Triangle budget: 300
Brief: Lying flat, long axis along Z with the connector pointing +Z: a slim rectangular navy body with a chamfered top edge, a short brass collar ring, and a flat iron USB-A tongue with a small black contact block. No separate cap.
Required named parts: body, collar, c... |
stage1-train-05755 | prop | I need a low-poly utility box. | Asset: Roadside utility cabinet
Triangle budget: 400
Brief: Street utility cabinet standing upright: tall sage-green body, slightly overhanging flat iron lid, inset front door with a small brass handle and two louvred vent slots near the top. Four short dark-wood stub feet, everything connected, front +Z.
Required name... |
stage1-train-05756 | tool or gear | I need a low-poly utility box cutter. | Asset: Pocket box cutter
Triangle budget: 300
Brief: Retractable box cutter: flat rectangular iron handle body with a rounded rear lanyard hole, a black slider tab on top, and a short trapezoid blade extending from the front slot, ivory bright edge. Slight brass rivet at the rear. Long axis along Z, blade pointing +Z.
... |
stage1-train-05757 | tool or gear | I need a low-poly utility duffel bag. | Asset: Canvas utility duffel
Triangle budget: 500
Brief: Duffel resting on the ground, long axis along X, front facing +Z: a fat sage canvas cylinder with faceted round end caps, a top zipper flap of ivory piping, two darkWood strap bands wrapping the body with brass buckles, and two arched darkWood carry handles meeti... |
stage1-train-05758 | vehicle | Build a low-poly utility helicopter. | Asset: Utility helicopter
Triangle budget: 900
Brief: Compact utility helicopter facing +Z: rounded cabin fuselage with a sloped ivory-tinted canopy at the nose, two flat landing skids resting at y=0, a tall rotor mast with two crossed main blades above, and a tapered tail boom running back (-Z) into a fin with a small... |
stage1-train-05759 | tool or gear | I need a low-poly utility knife. | Asset: Folding utility knife
Triangle budget: 300
Brief: Folding pocket knife, open and lying flat, blade pointing +Z: flat rectangular darkWood handle scales over an iron frame, a single beveled iron blade angling forward from the pivot, small brass pivot pin at the joint. Thin and flat, resting on the ground plane.
R... |
stage1-train-05760 | prop | Build a low-poly utility pole. | Asset: Weathered utility pole
Triangle budget: 400
Brief: Tall darkWood pole standing vertical, a single horizontal oak crossarm near the top with two angled braces below it, four small ivory insulators spaced along the crossarm top. No wires, parts physically joined.
Required named parts: pole, crossarm, brace_left, b... |
stage1-train-05761 | architecture | Build a low-poly utility substation building. | Asset: Compact utility substation
Triangle budget: 700
Brief: Squat rectangular flat-roofed substation: iron-grey concrete main block with a slightly overhanging roof slab, a rust steel double door centred on the front (+Z), two louvered vent panels on the side walls, and a small transformer box on a concrete pad at th... |
stage1-train-05762 | vehicle | Build a low-poly utility van. | Asset: Boxy utility van
Triangle budget: 800
Brief: Small panel van facing +Z: tall boxy cargo body with a slightly sloped front hood and windshield, flat roof, four wheels on short axles, side door recess. Navy body with ivory bumpers and iron wheels.
Required named parts: body, cab_front, wheel_front_left, wheel_fron... |
stage1-train-05763 | vehicle | Build a low-poly utility vehicle. | Asset: Compact utility truck
Triangle budget: 800
Brief: Small flatbed utility truck facing +Z: boxy cab with sloped windscreen and open flat bed behind it, four chunky wheels on short axles, front bumper and two round headlights. Sage body with navy cab roof, iron wheels, black tyres, brass headlights.
Required named ... |
stage1-train-05764 | fantasy or game | Build a low-poly vacuum bot. | Asset: Enchanted vacuum bot
Triangle budget: 450
Brief: Squat round disc bot: a low cylindrical hull on a dark brush skirt, a domed top lid with a glowing brass rune ring, one round sensor eye facing +Z, and two stubby side vents. Iron hull, brass trim, ivory dome.
Required named parts: hull, brush_skirt, dome_lid, run... |
stage1-train-05765 | container or food | I need a low-poly vacuum seal bag. | Asset: Vacuum-sealed food bag
Triangle budget: 350
Brief: Flat vacuum-sealed pouch lying horizontally: a rounded slab of clear-ivory film, slightly puffed around the contents, with a crimped double seal band across the top edge and a small tear notch. Inside, one low sage lump pressed flat against the film; front face ... |
stage1-train-05766 | tool or gear | I need a low-poly thermos flask. | Asset: Camping thermos
Triangle budget: 450
Brief: Upright vacuum thermos standing on the ground: squat cylindrical body with a short tapered shoulder, a brass collar ring at the neck, a screw-on ivory cup cap, and a dark base ring; small loop handle on the back (-Z). Sage body, front faces +Z.
Required named parts: bo... |
stage1-train-05767 | furniture | Build a low-poly valet stand. | Asset: Valet stand
Triangle budget: 450
Brief: Suit valet: flat cross foot at the ground, slender tapered post rising to a sloped shoulder bar for hanging a jacket, a small tray jutting forward on the post at waist height, and a short brass tie rail below the tray. Oak with darkWood post and brass accents.
Required nam... |
stage1-train-05768 | fantasy or game | I need a low-poly vampire bat. | Asset: Vampire bat
Triangle budget: 550
Brief: Hovering vampire bat with wings spread wide and small clawed feet trailing down to ground level. Egg-shaped charcoal body, blunt head with big pointed ears, ivory fangs, rust inner ears and eyes; wing membranes as flat scalloped planes with a visible arm spar along the lea... |
stage1-train-05769 | plant or nature | Build a low-poly vanilla orchid vine. | Asset: Vanilla orchid vine
Triangle budget: 500
Brief: A slender oak stake rises from the ground with a sage vine winding up it in a loose spiral, three flat oval leaves alternating along the vine, and two ivory orchid blooms near the top with a small brass lip. All parts touch the stake or vine.
Required named parts: ... |
stage1-train-05770 | plant or nature | Build a low-poly vanilla vine with pods. | Asset: Vanilla pod vine
Triangle budget: 400
Brief: Upright vanilla vine: a slender sage stem rising from the ground with a gentle curve, three broad pointed leaves branching off at staggered heights, and three long slender tapered pods hanging straight down from the stem, darkWood with black tips. Stem, leaves and pod... |
stage1-train-05771 | furniture | Make a low-poly vanity countertop. | Asset: Compact vanity countertop
Triangle budget: 650
Brief: Freestanding vanity: a squared darkWood cabinet on four short legs, a broad oak countertop slab with slight overhang, an inset ivory basin centred under a brass faucet at the back, and two drawer fronts with brass pulls facing +Z.
Required named parts: counte... |
stage1-train-05772 | furniture | I need a low-poly vanity drawer unit. | Asset: Cosy vanity drawer unit
Triangle budget: 550
Brief: Compact upright drawer unit facing +Z: three flush stacked drawer fronts with small brass knobs, a plain oak carcass and slightly overhanging top, standing on four short darkWood tapered legs at the corners. All parts touch; ground at y=0.
Required named parts:... |
stage1-train-05773 | furniture | Build a low-poly vanity light fixture. | Asset: Twin-shade vanity light
Triangle budget: 400
Brief: Wall vanity light facing +Z: a flat oval backplate against the wall (-Z), a short stem, a horizontal brass bar, and two ivory cone shades angled forward and slightly down from the bar ends. Brass and ivory with dark iron accents.
Required named parts: backplate... |
stage1-train-05774 | furniture | I need a low-poly vanity mirror. | Asset: Tabletop vanity mirror
Triangle budget: 400
Brief: Tabletop vanity mirror facing +Z: flat oval frame held between two small curving pivot arms on a low oval foot, ivory mirror face recessed slightly in the frame. Frame oak with brass pivot pins.
Required named parts: base, frame, mirror_glass, pivot_arm_left, pi... |
stage1-train-05775 | furniture | I need a low-poly vanity tray. | Asset: Brass vanity tray
Triangle budget: 300
Brief: Shallow oval tray with a low raised rim and two small loop handles on the short ends, sitting flat on the ground plane. Flat brass body with a slightly darker iron rim edge, no contents.
Required named parts: tray_base, rim, handle_left, handle_right
```javascript
f... |
stage1-train-05776 | container or food | I need a low-poly vegetable case. | Asset: Market vegetable case
Triangle budget: 500
Brief: Open shallow wooden crate with slightly slatted sides, open top facing up, split by two cross dividers into three compartments holding simple produce: a round sage cabbage, a rust carrot, an ivory onion. Oak and darkWood with flat produce colours.
Required named ... |
stage1-train-05777 | container or food | I need a low-poly vegetable peeler. | Asset: Swivel vegetable peeler
Triangle budget: 350
Brief: Hand peeler lying flat along Z: an oak handle at the back (-Z), a short brass ferrule, then two iron yoke arms that hold a flat rectangular blade head at the front (+Z) with a slot opening and a visible cutting edge. Everything joined; handle slightly thicker t... |
stage1-train-05778 | container or food | I need a low-poly veggie burger. | Asset: Stacked veggie burger
Triangle budget: 500
Brief: Round stacked burger sitting flat: domed top bun over a ruffled lettuce layer, a thick dark bean patty, a tomato-coloured slice, and a flat bottom bun. Layers slightly offset for a hand-built look.
Required named parts: bun_top, lettuce, patty, tomato_slice, bun_... |
stage1-train-05779 | tool or gear | Build a low-poly mechanical odometer. | Asset: Brass-drive odometer
Triangle budget: 650
Brief: Compact counter unit resting upright: rectangular iron housing with a recessed ivory window on the front (+Z) showing three ribbed cylindrical digit drums side by side, a brass drive gear on the right side riding a short cross-shaft, and two mounting tabs at the b... |
stage1-train-05780 | vehicle | Build a low-poly velomobile. | Asset: Streamlined velomobile
Triangle budget: 800
Brief: Tadpole velomobile facing +Z: low rounded aerodynamic shell tapering to a tail, two front wheels under the nose fairing and one rear wheel, open cockpit with a small ivory canopy hump, dark wheel arches. Sage shell, black wheels, iron trim.
Required named parts:... |
stage1-train-05781 | furniture | I need a low-poly velvet loveseat. | Asset: Velvet loveseat
Triangle budget: 800
Brief: Two-seat loveseat facing +Z: boxy navy velvet back rising behind, low base, two rounded square arms flanking, two seat cushions split down the middle, four short oak legs at the corners. Plush but planar, flat-shaded.
Required named parts: back, base, arm_left, arm_rig... |
stage1-train-05782 | fantasy or game | I need a low-poly vengeful revenant for a fantasy game. | Asset: Vengeful revenant
Triangle budget: 700
Brief: Hunched forward-facing undead figure standing on two feet, wrapped in a tattered navy cloak with a ragged hem, pale ivory gaunt head sunk in a pointed hood, thin arms hanging low with one rusted iron blade in the right hand. Deliberately planar, no floating parts.
Re... |
stage1-train-05783 | architecture | Build a low-poly rooftop vent stack. | Asset: Weathered vent stack
Triangle budget: 500
Brief: Industrial vent stack: wide bolted flange base, tall tapered pipe rising from it, a short 90-degree elbow near the top turning +Z, and a slanted rain hood over the outlet. Rust iron pipe with brass bolts on the base.
Required named parts: base_flange, stack_pipe, ... |
stage1-train-05784 | plant or nature | Build a low-poly ventifact stone. | Asset: Wind-carved ventifact stone
Triangle budget: 250
Brief: Wind-polished desert boulder: a squat wedge-shaped rock tilted so its sharp keel ridge faces +Z, with two or three broad flat facets meeting at crisp edges, plus a small chipped pebble lodged against its base. Muted stone grey with a darker iron-toned shado... |
stage1-train-05785 | bird, sea creature or bug | I need a low-poly venus clam shell. | Asset: Venus clam shell
Triangle budget: 350
Brief: Single open half-shell resting with its hinge at the back: fan-shaped ridged valve with radiating ribs, scalloped rim, slightly cupped bowl. Ivory with sage interior shading.
Required named parts: valve, hinge, ribs
```javascript
function buildAsset(THREE) {
const ... |
stage1-train-05786 | tool or gear | Build a low-poly vernier caliper. | Asset: Brass vernier caliper
Triangle budget: 450
Brief: Lying flat, long axis along X, jaws opening toward +X: a flat iron scale beam with engraved-looking ivory scale strip on top, fixed L-shaped jaw at the +X end, a sliding jaw block riding the beam with a small thumb wheel and lock screw, and a thin depth rod exten... |
stage1-train-05787 | tool or gear | I need a low-poly vertical speed indicator gauge. | Asset: Panel vertical speed indicator
Triangle budget: 350
Brief: Aircraft VSI: cylindrical iron casing facing +Z, inset ivory dial face, thin black pointer from centre angled to the upper right, brass bezel ring around the face, small threaded brass connector stub at the back (-Z). Compact, flat-shaded.
Required named... |
stage1-train-05788 | furniture | I need a low-poly vessel sink. | Asset: Vessel sink
Triangle budget: 500
Brief: Round vessel basin sitting proud of a thin square counter slab, with a rolled rim, recessed drain at the bowl floor, and a slender gooseneck faucet rising behind on the slab. Ivory basin, brass faucet and drain.
Required named parts: basin, rim, drain, faucet, counter_slab... |
stage1-train-05789 | vehicle | Build a low-poly Victoria carriage. | Asset: Open Victoria carriage
Triangle budget: 900
Brief: Light open four-wheeled carriage facing +Z: a curved swept-side coach body with a raised driver bench at the front and a folded calash hood behind the rear passenger seat. Four spoked wheels sit on two axles (large rear, smaller front), with two shafts projectin... |
stage1-train-05790 | architecture | Build a low-poly victory column monument. | Asset: Victory column
Triangle budget: 700
Brief: A tall commemorative column standing upright: a stepped square pedestal, then a slender tapered shaft, a flared capital, topped by a small standing figure. Pedestal and shaft in ivory stone tones with iron accents, capital and statue in brass. Symmetric, faces +Z.
Requi... |
stage1-train-05791 | animal | I need a low-poly vicuña. | Asset: Slender vicuña
Triangle budget: 700
Brief: Standing vicuña facing +Z: small compact body on four long thin legs, a long slender neck rising to a small head with two tall pointed ears, short tufted tail. Tawny oak coat with ivory chest and muzzle underside, black hooves and nose.
Required named parts: body, neck,... |
stage1-train-05792 | prop | I need a low-poly video doorbell. | Asset: Video doorbell
Triangle budget: 300
Brief: Wall-mounted video doorbell, vertical rounded slab facing +Z: navy body with an iron bezel frame, round black camera lens near the top, brass push button near the bottom, and a thin dark mounting plate flat behind it against the wall.
Required named parts: mounting_plat... |
stage1-train-05793 | architecture | Build a low-poly village church. | Asset: Village church
Triangle budget: 900
Brief: Small parish church: long nave with gabled roof, square bell tower at the front (+Z) rising above the ridge, pointed spire on the tower, arched door at the tower base and small windows along the nave. Ivory walls, darkWood roof and door, brass spire tip.
Required named ... |
stage1-train-05794 | architecture | Build a low-poly village pound. | Asset: Village pound
Triangle budget: 900
Brief: Small stone enclosure open to the sky: four low dry-stone walls (ivory blocks with a slightly uneven top course), leaving a doorway gap at the +Z front. A darkWood plank gate hinged on one front post swings shut across the gap, with iron strap hinges and a brass latch. R... |
stage1-train-05795 | fantasy or game | Build a low-poly vine blight creature. | Asset: Rootbound vine blight
Triangle budget: 800
Brief: Hunched plant humanoid leaning forward: broad gnarled trunk torso, small sunken head with two ivory eyes, leaf crest on top, long dangling arms ending in root fingers, short bowed legs on root feet, sage-green bark over darkWood with a couple of rust thorn vines ... |
stage1-train-05796 | animal | Build a low-poly vine snake. | Asset: Slender vine snake
Triangle budget: 500
Brief: Posed on the ground in a loose S-coil, body tapering to a thin tail at the back and rising to a raised head facing +Z. Slender sage-green body with a pale ivory belly stripe, small black eyes, narrow wedge head.
Required named parts: body_coil, head, tail_tip, eye_l... |
stage1-train-05797 | container or food | I need a low-poly vinegar cruet. | Asset: Little vinegar cruet
Triangle budget: 400
Brief: Small cruet standing upright: bulbous faceted glass body tapering to a slim neck, a brass collar ring at the neck, a short oak cork stopper on top, and a small looped glass handle on the right side. Glass tinted sage, brass and oak accents, front faces +Z.
Require... |
stage1-train-05798 | container or food | I need a low-poly vinegar dispenser bottle. | Asset: Vinegar dispenser bottle
Triangle budget: 350
Brief: Squat square-shouldered bottle standing upright, short neck with a small brass pour spout cap, a slim ivory label band across the front. Navy glass body with dark shadows.
Required named parts: body, neck, spout_cap, label
```javascript
function buildAsset(TH... |
stage1-train-05799 | vehicle | Build a low-poly vintage bicycle. | Asset: Vintage bicycle
Triangle budget: 900
Brief: Classic roadster facing +Z: two large spoked-look wheels (front at +Z, rear at -Z), a slender diamond frame in sage, curved handlebars with iron grips, a darkWood sprung saddle, and a small brass crank with pedals at the bottom bracket.
Required named parts: wheel_fron... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.