id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-06100 | furniture | Build a low-poly wooden wine rack. | Asset: Freestanding wine rack
Triangle budget: 500
Brief: Freestanding rack standing on the ground: two vertical side panels (slab-sided, slightly tapered outward at the base), three horizontal shelves spanning between them to make two rows of cubbies, and a thin dark back rail behind each row holding bottles. Oak pane... |
stage1-train-06101 | tool or gear | Build a low-poly wooden workbench. | Asset: Sturdy workbench
Triangle budget: 550
Brief: Workbench facing +Z: thick oak top slab with slight overhang, four square darkWood legs set in from the corners, a flat lower shelf joining the legs, and a small iron vise clamped to the front-left edge of the top. Everything sits on the ground at y=0.
Required named ... |
stage1-train-06102 | prop | I need a low-poly wooden xylophone. | Asset: Wooden xylophone
Triangle budget: 500
Brief: Xylophone lying flat: two oak side rails with raised ends, six graduated darkWood bars spanning between them shortest to longest left to right, and two mallets resting angled across the rails. Brass pin accents at bar ends.
Required named parts: rail_left, rail_right,... |
stage1-train-06103 | prop | I need a low-poly wooden yo-yo. | Asset: Wooden yo-yo
Triangle budget: 250
Brief: Two shallow cylindrical discs of equal size stacked on a vertical axis with a narrow gap between them, joined by a thin central axle; a short string loop rises from the gap. Oak discs, darkWood axle, ivory string.
Required named parts: disc_left, disc_right, axle, string
... |
stage1-train-06104 | bird, sea creature or bug | Build a low-poly woodlark bird. | Asset: Perched woodlark
Triangle budget: 450
Brief: Small songbird standing on two thin legs, plump teardrop body tilted slightly up, round head with a short fine beak, folded wings flat on either side, and a notched tail angled down behind. Oak-brown back and wings, ivory breast and belly, darkWood beak and legs.
Requ... |
stage1-train-06105 | bird, sea creature or bug | Build a low-poly woodlouse. | Asset: Curled woodlouse
Triangle budget: 550
Brief: Pill bug seen from above: three overlapping domed shell segments tapering to the rear, a small rounded head plate at +Z, two short angled antennae, and six visible legs (three per side) tucked under the shell. Dark wood-toned shell, black legs.
Required named parts: s... |
stage1-train-06106 | tool or gear | Build a low-poly woodworking vise. | Asset: Bench woodworking vise
Triangle budget: 500
Brief: Iron bench vise: a fixed rear jaw with a flat mounting flange, a sliding front jaw facing it across a small gap, two horizontal guide rods and a central screw between them, and a T-handle with two ball knobs at the front. Jaws clamp along Z, handle toward +Z; da... |
stage1-train-06107 | animal | I need a low-poly woolly mammoth. | Asset: Woolly mammoth
Triangle budget: 1000
Brief: Standing mammoth in profile facing +Z: massive rounded body with a raised shoulder hump, domed head with a long trunk curling down and forward, two curved ivory tusks, small flat ears, four columnar legs, short tufted tail. Shaggy coat in oak with darkWood fur skirt, t... |
stage1-train-06108 | animal | Build a low-poly woolly mammoth calf. | Asset: Woolly mammoth calf
Triangle budget: 850
Brief: Plump calf facing +Z: high-domed head with short curling trunk and two small upward tusks, rounded shaggy body, four stubby legs standing, small flap ears, thin tail. Rust-brown shaggy coat with darkWood shag skirt, ivory tusks.
Required named parts: body, head, tr... |
stage1-train-06109 | animal | I need a low-poly woolly rhinoceros. | Asset: Woolly rhinoceros
Triangle budget: 1000
Brief: Standing woolly rhino, heavy hunched body with a shoulder hump, low-slung head dipped to +Z, long curved ivory front horn plus a shorter second horn behind it, four stubby legs, small ears, thin tail. Shaggy darkWood coat with oak fur fringes along the belly and sho... |
stage1-train-06110 | animal | I need a low-poly woolly sheep. | Asset: Woolly sheep
Triangle budget: 600
Brief: Plump sheep standing on four short thin legs, body built from a few clustered rounded wool lumps in ivory, small dark head facing +Z with two drooping ears, stubby tail at the back. Face and legs darkWood.
Required named parts: body, wool_lump_1, wool_lump_2, head, ear_le... |
stage1-train-06111 | container or food | I need a low-poly Worcestershire sauce bottle. | Asset: Worcestershire sauce bottle
Triangle budget: 350
Brief: Upright squat glass bottle: rounded rectangular body tapering to a short neck, brass screw cap on top, ivory wrap-around label on the front face. Dark amber-brown glass.
Required named parts: bottle_body, neck, cap, label
```javascript
function buildAsset(... |
stage1-train-06112 | fantasy or game | Build a low-poly fantasy work light. | Asset: Caged work light
Triangle budget: 500
Brief: Portable work light standing on a small round iron base: short stout post, a boxy lamp head on top tilted slightly forward (+Z) with ivory panes, wrapped in a brass cage of vertical ribs, and a curved carry handle over the top. Iron frame, brass trim.
Required named p... |
stage1-train-06113 | bird, sea creature or bug | Build a low-poly worker termite. | Asset: Worker termite
Triangle budget: 500
Brief: Pale worker termite standing on six short legs: bead-like segmented abdomen tapering back (-Z), small thorax, large rounded head forward (+Z) with two short beaded antennae and a pair of small dark mandibles. Cream-ivory body with oak mandibles, flat shaded.
Required na... |
stage1-train-06114 | prop | I need a low-poly worn leather boxing glove. | Asset: Worn boxing glove
Triangle budget: 500
Brief: Lone boxing glove lying upright, fist end up and cuff toward -Z with the thumb on its left side (+X). Bulbous rounded mitt, short thick thumb, flared wrist cuff, a few brass eyelets and a lace ridge along the back. Rust leather with darkWood cuff and ivory wear accen... |
stage1-train-06115 | bird, sea creature or bug | I need a low-poly woven nest. | Asset: Woven twig nest
Triangle budget: 450
Brief: Open bowl-shaped nest sitting on the ground: thick rough outer shell with a hollow inner cavity, a chunky uneven rim ring, and a few stray twigs poking out at the sides. Dry oak and darkWood tones.
Required named parts: outer_bowl, inner_bowl, rim, twig_1, twig_2, twig... |
stage1-train-06116 | plant or nature | Build a low-poly woven seagrass planter with a small plant. | Asset: Woven seagrass planter
Triangle budget: 450
Brief: Slightly tapered woven basket pot with a visible weave band and a thick rolled rim, filled with a dark soil disc; three broad sage leaves rise from the centre, one taller than the rest. Warm oak weave with darkWood banding.
Required named parts: pot_body, weave_... |
stage1-train-06117 | fantasy or game | Build a low-poly hanging tapestry for a fantasy game. | Asset: Woven tapestry
Triangle budget: 500
Brief: Wall tapestry hanging from a horizontal oak rod with brass finials, the ivory cloth falling in gentle planar waves to a fringed hem; a rust-and-navy woven band and a simple sage emblem sit across the middle, with small loops connecting cloth to rod. Front faces +Z.
Requ... |
stage1-train-06118 | prop | I need a low-poly roll of wrapping paper. | Asset: Wrapping paper roll
Triangle budget: 400
Brief: Standing paper roll: hollow ivory cylinder with visible dark core hole at the top, one short unrolled flap of printed paper hanging off the side, thin brass edge trim at the rims. Upright, core axis along Y.
Required named parts: roll_body, core_hole, paper_flap, r... |
stage1-train-06119 | bird, sea creature or bug | I need a low-poly wrestling halfbeak fish. | Asset: Wrestling halfbeak
Triangle budget: 400
Brief: Slender surface-dwelling fish held horizontal, floating just above the ground line with the long needle-like lower jaw thrust forward (+Z) and a short upper jaw above it; forked tail fin at -Z, small dorsal fin set far back, two small pectoral fins at the sides. Fla... |
stage1-train-06120 | furniture | I need a low-poly wrist rest pad. | Asset: Cloth wrist rest pad
Triangle budget: 350
Brief: Elongated rounded foam pad, wedge-shaped so the front edge is low and the back is gently raised, sitting flat on the ground with its long axis along X. Soft navy fabric body on a thin darkWood base strip with two small black rubber feet underneath.
Required named ... |
stage1-train-06121 | prop | I need a pair of low-poly wrist weights. | Asset: Wrist weights
Triangle budget: 400
Brief: Two padded fabric wrist bands lying side by side, each a thick cylinder with a rounded seam, plus a small buckle strap wrapped across the top. Navy fabric with brass buckle hardware.
Required named parts: band_1, band_2, strap_1, strap_2, buckle_1, buckle_2
```javascrip... |
stage1-train-06122 | architecture | Build a low-poly wrought iron gate. | Asset: Wrought iron garden gate
Triangle budget: 700
Brief: Single gate leaf standing between two square stone-free iron posts: rectangular frame of flat rails with a row of evenly spaced vertical bars, spear finials on top of the bars, hinge plates on the left post and a simple latch on the right. Dark iron with brass... |
stage1-train-06123 | animal | Build a low-poly yak. | Asset: Shaggy yak
Triangle budget: 700
Brief: Bulky shaggy yak standing on the ground: heavy barrel body with a raised shoulder hump, low-slung head facing +Z with short curved ivory horns, four sturdy short legs, and a bushy tail hanging at the back. Dark brown coat with a paler muzzle.
Required named parts: body, hum... |
stage1-train-06124 | plant or nature | Build a low-poly yardang rock ridge. | Asset: Wind-carved yardang ridge
Triangle budget: 500
Brief: An elongated wind-sculpted rock ridge sitting on the ground, blunt rounded nose facing +Z and a long tapered tail trailing back to -Z. Body in iron grey, three parallel flute ridges running nose-to-tail in darkWood, a low rust base outcrop beneath, small sage... |
stage1-train-06125 | tool or gear | I need a low-poly yardstick. | Asset: Wooden yardstick
Triangle budget: 250
Brief: A long flat wooden rule lying along Z on the ground, one end toward +Z: thin rectangular oak blade, brass cap bands on both short ends, a small brass hanging ring at the +Z end, and a strip of raised tick marks down one edge. Flat-shaded, no lettering.
Required named ... |
stage1-train-06126 | tool or gear | I need a low-poly ball of yarn. | Asset: Ball of yarn
Triangle budget: 350
Brief: Squat faceted sphere of wound yarn, with two raised wrapping bands crossing over it to read as strands, and a short loose thread end curling off the side toward +Z. Rust yarn, thread end slightly darker.
Required named parts: body, band_1, band_2, thread_end
```javascrip... |
stage1-train-06127 | animal | Build a low-poly poison dart frog. | Asset: Yellow-banded poison frog
Triangle budget: 500
Brief: Crouched frog facing +Z: low rounded body with a raised back hump, wide flat head, two bulging eyes on top, four splayed legs with toe pads flat on the ground. Bright yellow ground colour with black bands across the back and legs.
Required named parts: body, ... |
stage1-train-06128 | bird, sea creature or bug | Build a low-poly yellow boxfish. | Asset: Yellow boxfish
Triangle budget: 450
Brief: Boxy yellow fish: a chunky rounded-cube body with faint darker spots, tiny pursed mouth and small black eyes at the front (+Z), a fan tail fin at the back, small dorsal and anal fins, and two stubby pectoral fins on the sides. Bright yellow where identity needs it, blac... |
stage1-train-06129 | bird, sea creature or bug | Build a low-poly yellow perch. | Asset: Yellow perch
Triangle budget: 450
Brief: Perch with head facing +Z: slender oval body, spiky two-part dorsal fin along the back, forked tail fin at -Z, small paired pectoral fins low on the sides, jaw slightly open. Flat ochre-yellow body with dark olive back and vertical bar stripes; ivory belly.
Required named... |
stage1-train-06130 | plant or nature | I need a low-poly rutabaga. | Asset: Yellow rutabaga
Triangle budget: 350
Brief: Rutabaga/swede: squat bulbous root body, wider than tall, with a slightly pointed taproot tip at the bottom and a flat purple-tinged crown at the top. Three short leaf stems rise from the crown, each ending in a simple flat green leaf blade. Pale yellow body with purpl... |
stage1-train-06131 | vehicle | Build a low-poly school bus. | Asset: Yellow school bus
Triangle budget: 900
Brief: Classic school bus facing +Z: long flat-sided yellow body with rounded roof, short protruding hood at the front, dark window band along the sides, a door just behind the front wheel, four black wheels with iron hubs, dark bumpers front and rear. Cheerful yellow body,... |
stage1-train-06132 | plant or nature | I need a low-poly yellow squash. | Asset: Yellow squash
Triangle budget: 350
Brief: Upright squash resting on the ground: bulbous bell-shaped body widest at the bottom, tapering into a short neck, with a small sage stem on top and an ivory blossom scar on the underside. Body flat sunflower-yellow, five soft planar lobes.
Required named parts: body, neck... |
stage1-train-06133 | vehicle | Build a low-poly yellow taxi cab. | Asset: Yellow taxi cab
Triangle budget: 700
Brief: Chunky toy sedan taxi facing +Z: boxy yellow body with a slab cabin and dark window band, four iron wheels on visible axles, black bumpers front and back, small ivory roof sign box with a brass cap.
Required named parts: body, cabin, window_band, wheel_front_left, whee... |
stage1-train-06134 | plant or nature | Build a low-poly yew tree. | Asset: Dense yew tree
Triangle budget: 500
Brief: Upright yew: short flared reddish-brown trunk, a broad dense rounded crown of dark sage-green stacked clumps tapering to a soft point, lowest clump widest and nearly touching the ground. Slight asymmetry, planar facets.
Required named parts: trunk, root_flare, crown_low... |
stage1-train-06135 | prop | I need a low-poly yield sign. | Asset: Yield sign
Triangle budget: 350
Brief: Roadside yield sign: downward-pointing flat triangular plate with a rust-red border and ivory centre, mounted on a slender iron post with a small square foot flange at ground level. Plate faces +Z, apex pointing down.
Required named parts: post, sign_plate, sign_border, foo... |
stage1-train-06136 | prop | I need a low-poly yoga mat. | Asset: Rolled yoga mat
Triangle budget: 350
Brief: Yoga mat rolled into a cylinder lying along the X axis at ground level, sage, with slightly recessed spiral end caps hinting at the layers; one loose flap unrolls forward toward +Z, and a thin strap band wraps the middle. Brass strap, ivory flap underside.
Required nam... |
stage1-train-06137 | container or food | Build a low-poly yogurt drink bottle. | Asset: Yogurt drink bottle
Triangle budget: 350
Brief: Ayran-style bottle: tapered cylindrical body widest at the base, short shoulder rising to a narrow neck, screw cap on top, a wrapping label band around the lower body. Ivory bottle, navy cap, sage label, all parts stacked and connected, upright with ground at y=0.
... |
stage1-train-06138 | container or food | I need a low-poly yogurt tub. | Asset: Yogurt tub
Triangle budget: 350
Brief: Small yogurt pot standing upright: tapered round body wider at the top, a slight shoulder taper, a flat snap-on lid with a raised rim, and a narrow wrap band around the middle. Ivory tub, navy lid, sage band.
Required named parts: tub_body, lid, lid_rim, label_band
```java... |
stage1-train-06139 | animal | Build a low-poly Yorkshire terrier. | Asset: Yorkshire terrier
Triangle budget: 750
Brief: Standing small terrier facing +Z: compact body with a long silky coat falling to the ground, upright V-shaped ears, short muzzle with a black nose, four short straight legs, short upright tail. Dark steel-blue body coat with tan head, ears and chest.
Required named p... |
stage1-train-06140 | animal | Build a low-poly young badger. | Asset: Young badger
Triangle budget: 650
Brief: Cub sitting low and stout: long rounded body close to the ground, wedge-shaped head facing +Z with black-and-ivory face stripes, two small rounded ears, four short stubby legs, short tail at the back. Dark charcoal body with ivory blaze and pale grey underside; ears and m... |
stage1-train-06141 | animal | Build a low-poly young beaver for a woodland set. | Asset: Small beaver kit
Triangle budget: 650
Brief: Compact sitting beaver kit facing +Z: chunky rounded body with a broad flat paddle tail laid behind on the ground (-Z), upright head with two small round ears and ivory incisors, four short stubby legs. Warm oak fur, darkWood tail, black nose and eyes.
Required named ... |
stage1-train-06142 | animal | I need a low-poly young buck. | Asset: Young buck
Triangle budget: 700
Brief: Standing young male deer facing +Z: slim body with raised chest, upright neck and narrow head, short two-point antlers, two ears, four slender legs with dark hooves, short tail. Oak coat with darkWood hooves and antlers.
Required named parts: body, neck, head, ear_left, ear... |
stage1-train-06143 | plant or nature | Build a low-poly young carrot. | Asset: Young carrot
Triangle budget: 300
Brief: Upright young carrot standing on its tapered root tip, slightly leaning: a short fat rust-orange root with a few tiny side rootlets, topped by a small crown and a tuft of five sage-green leaves fanning up and out. Face +Z.
Required named parts: root, crown, leaf_1, leaf_2... |
stage1-train-06144 | plant or nature | Build a low-poly young coconut on the palm. | Asset: Young green coconut
Triangle budget: 350
Brief: A young green coconut hanging from a short palm stalk: rounded husk body tapering to a pointed base, a stubby cut stem rising at the top, and two small drooping frond sprays attached at the stem. Sage-green husk, oak stalk, ivory cut top.
Required named parts: husk... |
stage1-train-06145 | plant or nature | Build a low-poly young fern. | Asset: Young fern
Triangle budget: 500
Brief: Young fern: a tight cluster of five arching fronds radiating from a small central crown, each frond a tapered flat blade with shallow pinnae notches, tips tallest in the middle. Sage green with darkWood crown.
Required named parts: crown, frond_1, frond_2, frond_3, frond_4,... |
stage1-train-06146 | animal | Build a low-poly young mammoth. | Asset: Young mammoth
Triangle budget: 850
Brief: Juvenile mammoth standing four-square facing +Z: rounded bulky body, domed head with a short downward-curving trunk, a pair of small ivory tusks, two broad fan ears, stubby legs and a short tufted tail; shaggy rust-brown coat with a darker skirt of fur along the belly.
R... |
stage1-train-06147 | plant or nature | Build a low-poly sapling tree. | Asset: Young sapling
Triangle budget: 350
Brief: Slender young tree: thin tapered trunk (darkWood) rising from ground, two or three short angled branches near the top, each tipped with a small flat sage-green leaf cluster; crown open and sparse, not a solid blob. Front faces +Z.
Required named parts: trunk, branch_lowe... |
stage1-train-06148 | animal | I need a low-poly young triceratops. | Asset: Young triceratops
Triangle budget: 750
Brief: Chunky calf triceratops standing on four stocky legs, facing +Z: barrel body, short neck into a blunt beaked head with a broad ivory-edged frill fanning back over the shoulders, small nose horn and two short brow horns. Sage body, ivory horns and frill rim, black hoo... |
stage1-train-06149 | plant or nature | I need a low-poly yucca flower stalk. | Asset: Flowering yucca stalk
Triangle budget: 450
Brief: Yucca in bloom: low rosette of stiff spiky leaves splayed at ground level, a single tall stalk rising from the centre, topped with a conical cluster of ivory bell flowers. Sage leaves, oak stalk.
Required named parts: leaf_1, leaf_2, leaf_3, leaf_4, leaf_5, leaf_... |
stage1-train-06150 | plant or nature | Build a low-poly yucca plant. | Asset: Spiky yucca
Triangle budget: 450
Brief: Yucca: short rough trunk topped by two tiers of stiff sword-shaped leaves radiating outward and upward, plus a single tall ivory flower stalk with a small clustered bloom head. Grey-green leaves, darkWood trunk.
Required named parts: trunk, leaves_lower, leaves_upper, flow... |
stage1-train-06151 | prop | I need a low-poly yule log prop. | Asset: Festive yule log
Triangle budget: 450
Brief: A horizontal oak log lying along the X axis with pale ivory end caps, three short ivory candles sunk into its top, and a sprig of sage holly leaves with rust berries at one end. Flat-shaded, resting on the ground.
Required named parts: log, end_cap_left, end_cap_right... |
stage1-train-06152 | bird, sea creature or bug | Build a low-poly zebra danio fish. | Asset: Zebra danio
Triangle budget: 400
Brief: Small slender fish swimming +Z, side-facing body with flat horizontal zebra stripes, tapering to a forked tail fin; small dorsal fin on top, paired pectoral fins at the sides. Ivory body with navy stripes, iron fins.
Required named parts: body, tail_fin, dorsal_fin, pector... |
stage1-train-06153 | bird, sea creature or bug | I need a low-poly zebra mbuna fish. | Asset: Zebra mbuna
Triangle budget: 500
Brief: Small cichlid seen side-on, body horizontal along Z with the head at +Z, deep-bodied and slightly flattened. Navy body with three black vertical bars, forked tail fin and a long dorsal fin along the back, small pectoral fins, black eyes. Fins navy-black.
Required named par... |
stage1-train-06154 | vehicle | I need a low-poly zeppelin airship. | Asset: Vintage zeppelin
Triangle budget: 900
Brief: Airship floating level with nose facing +Z: faceted elongated ivory envelope, a brass nose cap, four flat tail fins in a cross at the rear, a small navy gondola slung underneath, and a single propeller disc behind the tail. No ground contact needed beyond the model si... |
stage1-train-06155 | plant or nature | Build a low-poly zinc ore chunk. | Asset: Zinc ore chunk
Triangle budget: 350
Brief: Irregular faceted rock resting on the ground, widest at the base and tapering upward, with two angular crystal-like protrusions leaning out on one side. Iron-blue zinc grey body with rust-stained edges and thin brass flecks along a seam.
Required named parts: ore_body, ... |
stage1-train-06156 | prop | I need a low-poly zip line prop. | Asset: Woodland zip line
Triangle budget: 500
Brief: Two upright posts of unequal height, one taller with a small cross-braced anchor top, a taut iron cable sloping down from the high post to the low one, and a hanging iron trolley with a T-handle at mid-cable. Posts darkWood, cable and trolley iron, brass anchor fitti... |
stage1-train-06157 | container or food | Build a low-poly zip lunch tote. | Asset: Zip lunch tote
Triangle budget: 400
Brief: Soft-sided lunch bag standing upright: rounded box body with slightly domed top, a zip seam running along the top front edge with a small brass pull tab, two arched carry handles on the sides. Sage body, brass zipper, darkWood pull cord.
Required named parts: body, zip_... |
stage1-train-06158 | container or food | I need a low-poly zip-top freezer bag. | Asset: Zip-top freezer bag
Triangle budget: 300
Brief: Clear freezer bag standing upright: slightly tapered flat-front pouch body with softly bulged sides, a horizontal zip seal strip across the top, a small slider tab at one end, and a pinched bottom gusset resting on the ground. Pale ivory plastic with an iron-grey s... |
stage1-train-06159 | bird, sea creature or bug | Build a low-poly zoanthid colony. | Asset: Sunburst zoanthid colony
Triangle budget: 900
Brief: A tight cluster of five short cylindrical polyps of uneven height, all rising from one low encrusting mat at y=0, each topped by a flat oral disc ringed with small stubby triangular tentacles. Rust and brass polyps with ivory discs and sage mat.
Required named... |
stage1-train-06160 | plant or nature | I need a low-poly zoisite crystal. | Asset: Green zoisite crystal cluster
Triangle budget: 300
Brief: Upright crystal cluster: one tall six-sided prism with a faceted pyramidal tip, leaning slightly forward (+Z), flanked by two shorter prisms tilted outward; all rise from a low angular dark rock mass at ground level. Sage green crystals with iron-dark roc... |
stage1-train-06161 | fantasy or game | Build a low-poly zombie shambler. | Asset: Shambling zombie
Triangle budget: 700
Brief: Hunched forward with one shoulder dropped, both arms reaching out toward +Z, one leg trailing behind in a limp. Sage-green skin, navy tattered shirt, rust torn trousers, darkWood belt; face +Z at y=0.
Required named parts: torso, head, arm_left, arm_right, leg_front, ... |
stage1-train-06162 | plant or nature | Build a low-poly zucchini still on the vine. | Asset: Zucchini on vine
Triangle budget: 350
Brief: A single elongated zucchini lying at a slight angle, dark green with a paler tip, attached by a short woody stem to a trailing vine that loops to one side, with one broad flat sage leaf and a curled tendril beside it. Vine and leaf rest at ground level, squash slightl... |
stage1-train-06163 | architecture | Build a low-poly Zulu beehive hut. | Asset: Zulu beehive hut
Triangle budget: 500
Brief: Round thatched beehive hut: a domed grass shell sitting on a low cylindrical woven drum wall, a small recessed arched doorway facing +Z, and two horizontal binding ropes banding the dome. Ivory thatch dome, oak drum wall, darkWood doorway recess and ropes.
Required na... |
stage1-train-06164 | furniture | Build a low-poly accent cabinet. | Asset: Two-door accent cabinet
Triangle budget: 500
Brief: Compact accent cabinet: rectangular body with a flat overhanging top, two front doors with a slim vertical gap, small round brass knobs, four short tapered legs. Oak carcass with darker wood doors, face +Z.
Required named parts: carcass, top, door_left, door_ri... |
stage1-train-06165 | furniture | I need a low-poly two-seater loveseat. | Asset: Sage accent loveseat
Triangle budget: 700
Brief: Compact accent loveseat facing +Z: a chunky upholstered seat block with one thick cushion, a slightly reclined backrest with a separate back cushion, low rolled arms on each side, and four short tapered oak legs at the corners. Sage upholstery with oak feet and a ... |
stage1-train-06166 | fantasy or game | Build a low-poly round Greek shield for a hero. | Asset: Bronze Achilles shield
Triangle budget: 550
Brief: Round aspis shield standing upright, face toward +Z: shallow domed disc with a raised brass rim, three concentric engraved bands, and a central domed iron boss. Back has a forearm strap and a hand grip so it reads as carried, not decorative.
Required named parts... |
stage1-train-06167 | fantasy or game | I need a low-poly acid pool for a dungeon. | Asset: Bubbling acid pool
Triangle budget: 500
Brief: Shallow circular pit: a low irregular rim of dark stone blocks ringing a sunken acid surface at ground level, with a few clustered bubble domes rising from it. Acid is a flat sickly green; rim in iron-grey stone.
Required named parts: rim, pool_surface, bubble_1, bu... |
stage1-train-06168 | bird, sea creature or bug | I need a low-poly acorn worm. | Asset: Burrowing acorn worm
Triangle budget: 450
Brief: Acorn worm resting on the ground: a rounded acorn-shaped proboscis at the front (+Z), a raised ivory collar ring behind it, and a long trunk tapering back into a curled tail tip. Rust body with oak segment ridges along the trunk.
Required named parts: proboscis, c... |
stage1-train-06169 | furniture | I need a low-poly Adirondack loveseat. | Asset: Adirondack loveseat
Triangle budget: 750
Brief: Wide two-seat Adirondack chair facing +Z: low reclined slatted fan back, deep flat seat, broad horizontal armrests on the sides, four splayed plank legs. Oak seat and back with darkWood arms and legs.
Required named parts: seat, back, arm_left, arm_right, leg_front... |
stage1-train-06170 | furniture | Build a low-poly adjustable desk lamp. | Asset: Adjustable desk lamp
Triangle budget: 450
Brief: Angled-arm task lamp: round weighted base, short riser with a pivot knuckle, straight lower arm tilted up/forward, second knuckle, forward-leaning upper arm ending in a conical shade aimed down at +Z. Iron body, brass knuckles, ivory shade interior.
Required named... |
stage1-train-06171 | vehicle | I need a low-poly adjustable roller skate. | Asset: Adjustable roller skate
Triangle budget: 700
Brief: One skate facing +Z: a navy high-top boot with ivory cuff sitting on a two-piece telescoping iron chassis — front part carries the toe stop and front axle, rear part carries the heel axle — joined by a brass adjuster lever; four black wheels in two axles, all a... |
stage1-train-06172 | vehicle | Build a low-poly aerial refueling tanker plane. | Asset: Slate aerial tanker
Triangle budget: 1000
Brief: Chunky toy tanker aircraft facing +Z, fuselage a long tapered box with a stepped cockpit nose, swept-ish slab wings mid-mounted, single tail fin with low tailplanes, two underslung engine pods, and a straight refueling boom trailing back and down (-Z) from the rea... |
stage1-train-06173 | vehicle | I need a low-poly stunt plane. | Asset: Aerobatic stunt plane
Triangle budget: 900
Brief: Single-seat aerobatic biplane-ish monoplane: tapered fuselage nose to +Z with a rounded cowling and spinning two-blade propeller, low straight wing, tailplane with upright fin, fixed two-wheel gear under the nose. Ivory fuselage with rust wing and navy tail accen... |
stage1-train-06174 | vehicle | I need a low-poly biplane. | Asset: Little biplane
Triangle budget: 900
Brief: Toy biplane facing +Z: tapered fuselage with rounded nose, two stacked wings (upper longer, lower shorter) joined by four vertical struts, tailplane and small vertical fin at the back, propeller disc at the nose, two wheels on a strut undercarriage. Navy fuselage and wi... |
stage1-train-06175 | animal | Build a low-poly African elephant. | Asset: African elephant
Triangle budget: 900
Brief: Standing elephant facing +Z: heavy barrel body on four thick columnar legs, broad head with two large fan ears, a long trunk curving down to the ground, two short forward tusks, thin tail behind. Warm grey hide with ivory tusks.
Required named parts: body, head, ear_l... |
stage1-train-06176 | plant or nature | Build a low-poly potted African violet. | Asset: African violet in pot
Triangle budget: 550
Brief: Small houseplant: tapered cylindrical terracotta pot with a rim, dark soil disc sunk just below the rim, a flat rosette of broad rounded leaves arching outward and down, and a small cluster of violet flowers on short stems lifted above the centre. Front faces +Z.... |
stage1-train-06177 | prop | Build a low-poly set of agility poles. | Asset: Weave agility poles
Triangle budget: 450
Brief: Three slender upright weave poles in a row along the X axis, each with a small flat round foot at ground level, linked by a thin low rope so the toy assembly stays connected. Oak poles, darkWood feet, navy rope; front faces +Z.
Required named parts: pole_1, pole_2,... |
stage1-train-06178 | fantasy or game | Build a low-poly AI core artifact for a fantasy game. | Asset: Ancient AI core
Triangle budget: 550
Brief: A faceted sage-glowing orb seated in a brass ring cradle, held off the ground by three splayed iron legs meeting the ring; small brass clasp prongs grip the orb, and a short iron finial caps the top of the ring. Symmetric tripod stance, front leg toward +Z.
Required na... |
stage1-train-06179 | prop | I need a low-poly air hockey puck. | Asset: Air hockey puck
Triangle budget: 250
Brief: Flat cylindrical puck lying on the ground, slightly domed top, a thin recessed rim groove around the side, and a small raised centre boss. Navy body with an ivory top face.
Required named parts: puck_body, top_face, centre_boss
```javascript
function buildAsset(THREE)... |
stage1-train-06180 | animal | I need a low-poly Airedale terrier. | Asset: Airedale terrier
Triangle budget: 700
Brief: Standing square and alert, front legs straight, head high and facing +Z, tail carried erect. Rust-tan body, legs and face with a black saddle over the back, folded V ears, and a squarish tan beard-muzzle jutting forward under a black nose.
Required named parts: body, ... |
stage1-train-06181 | vehicle | Build a low-poly airport baggage tug. | Asset: Airport tug
Triangle budget: 700
Brief: Compact baggage tractor facing +Z: low boxy chassis with a small open cab at the rear, four chunky wheels (larger at the rear), a tow hitch pin at the back, and a small roof beacon. Navy body with iron wheels and brass hitch.
Required named parts: chassis, cab, wheel_front... |
stage1-train-06182 | container or food | Build a low-poly airtight canister. | Asset: Airtight canister
Triangle budget: 400
Brief: Kitchen storage canister: squat 10-sided cylindrical jar body, a shallow domed lid seated on top, a wire clamp bail over the lid hinged at the sides, and a small brass latch tab at the front. Ivory body, iron lid and bail, brass latch. Front faces +Z.
Required named ... |
stage1-train-06183 | bird, sea creature or bug | Build a low-poly albatross. | Asset: Wandering albatross
Triangle budget: 550
Brief: Standing seabird facing +Z: plump ivory body on short iron-grey legs, rounded head with a long brass hooked beak, two very long narrow wings folded back along the flanks and angled slightly outward, short ivory tail fan behind. Dark charcoal wingtips.
Required name... |
stage1-train-06184 | fantasy or game | I need a low-poly alchemist flask. | Asset: Bubbling alchemist flask
Triangle budget: 500
Brief: Round-bottom glass flask standing upright: spherical body, short tapered neck, brass collar band at the neck, cork stopper on top, glowing sage-green liquid filling the lower half of the sphere. Only two or three parts read at a glance.
Required named parts: f... |
stage1-train-06185 | animal | Build a low-poly alligator lizard. | Asset: Banded alligator lizard
Triangle budget: 500
Brief: Long low lizard crouched flat on the ground, head at +Z on a short thick neck, tapering tail sweeping back (-Z), four splayed legs with splayed toes, a raised ridge of small dorsal scales along the back. Sage body with rust bands on the tail.
Required named par... |
stage1-train-06186 | architecture | Build a low-poly aluminum smelter. | Asset: Potline smelter
Triangle budget: 1100
Brief: Reduction plant: long rectangular hall (long axis along X) with a shallow gabled roof and a low ridge vent, three squat reduction pots projecting along the front face, and a tall rust-red chimney stack rising at the right end with a short duct linking it to the roof. ... |
stage1-train-06187 | fantasy or game | I need a low-poly amber energy crystal. | Asset: Glowing amber crystal
Triangle budget: 350
Brief: Upright faceted amber crystal shard cluster: one tall central prism tapering to a point, two shorter shards leaning outward at its base, all sharing a small dark rock footing. Flat amber faces with brass-tinted highlight facets; no glow meshes.
Required named par... |
stage1-train-06188 | furniture | I need a low-poly amber glass lamp. | Asset: Amber glass table lamp
Triangle budget: 400
Brief: Upright table lamp facing +Z: a wide round darkWood base, a slender brass stem rising from it, a tapered amber glass shade ballooning over the stem, and a small brass finial capping the shade. Warm amber glass is the one non-palette colour, with brass trim.
Requ... |
stage1-train-06189 | bird, sea creature or bug | Build a low-poly amberjack fish. | Asset: Amberjack fish
Triangle budget: 500
Brief: Amberjack: streamlined torpedo body tapering to a narrow caudal peduncle, forked tail fin, two dorsal fins (spiny front, soft rear), pair of pectoral fins, small anal fin. Brassy amber back fading to ivory belly, dark eye.
Required named parts: body, tail_fin, dorsal_fi... |
stage1-train-06190 | animal | Build a low-poly beaver. | Asset: American beaver
Triangle budget: 700
Brief: Stocky beaver sitting low: rounded barrel body on short splayed hind legs, small forepaws tucked under the chest, blunt round head with tiny ears, and a broad flat paddle tail lying behind on the ground (-Z). Warm brown fur with a darker tail.
Required named parts: bod... |
stage1-train-06191 | plant or nature | I need a low-poly amethyst crystal cluster. | Asset: Amethyst crystal cluster
Triangle budget: 400
Brief: Upright cluster growing from a small dark rock base (iron) at y=0: one tall dominant hexagonal prism with a faceted pyramidal tip, plus two shorter prisms tilted outward left and right, all sharing the base. Flat violet amethyst tones with lighter tip facets.
... |
stage1-train-06192 | tool or gear | I need a low-poly analog ammeter. | Asset: Bench ammeter
Triangle budget: 400
Brief: Bench ammeter facing +Z: boxy ivory case with a dark iron bezel framing a round flat dial face, a thin black needle pivoting at the dial's base, two brass terminal posts on the bottom front. Sits flat on the ground.
Required named parts: case, bezel, dial_face, needle, t... |
stage1-train-06193 | fantasy or game | I need a low-poly amulet. | Asset: Warded brass amulet
Triangle budget: 400
Brief: Small hanging amulet facing +Z: a brass ring loop at top, a short iron link, and a flat octagonal brass pendant frame holding an inset navy gem with a small rust drop bead hanging below. Everything connected and centred on the loop.
Required named parts: ring_loop,... |
stage1-train-06194 | prop | Build a low-poly analog alarm clock. | Asset: Twin-bell alarm clock
Triangle budget: 450
Brief: Upright round alarm clock facing +Z: squat iron casing with an inset ivory dial, two brass bells on short stalks atop the case, small splayed legs at the bottom, and two flat hands on the dial. A brass winding knob sits on the right side.
Required named parts: bo... |
stage1-train-06195 | animal | Build a low-poly anchiceratops. | Asset: Anchiceratops
Triangle budget: 950
Brief: Standing quadruped facing +Z: heavy barrel body on four sturdy legs, thick tail dipping behind (-Z), blocky head with a toothless ivory beak, one short nose horn, two small brow horns, and a large rectangular frill sweeping up and back over the neck with notched edges. S... |
stage1-train-06196 | plant or nature | Build a low-poly ancient olive tree. | Asset: Gnarled old olive tree
Triangle budget: 900
Brief: A short, thick, twisted trunk splitting into two or three angular limbs, topped by a loose wide canopy of flat sage-green foliage clumps; trunk leans slightly with a hollow split at the base. Bark oak and darkWood, foliage sage with a few lighter ivory-tipped pl... |
stage1-train-06197 | fantasy or game | Build a low-poly ancient rune tablet. | Asset: Mossy rune tablet
Triangle budget: 400
Brief: A slab of bluish-grey stone (iron) standing slightly tilted back, its lower edge sunk into a chunky rough-hewn footing rock so it stands unaided; two shallow horizontal bands of abstract geometric rune grooves are incised across the face, with a sage moss patch creep... |
stage1-train-06198 | fantasy or game | I need a low-poly ancient spell tome for a fantasy game. | Asset: Ancient spell tome
Triangle budget: 650
Brief: A thick tome standing upright on its bottom edge, front cover facing +Z, spine to the left. Deep navy cover boards with rust-red corner caps, ivory page block with visible stacked leaves, a brass clasp band wrapping the fore-edge, and a small brass-framed gem set in... |
stage1-train-06199 | bird, sea creature or bug | I need a low-poly ant pupa. | Asset: Pale ant pupa
Triangle budget: 250
Brief: Ant pupa cocoon lying horizontally along +Z: a plump oval capsule with tapered rounded ends, faint segment grooves ringing the body, pale ivory shell with slightly darker seams. No head or legs; smooth and closed.
Required named parts: pupa_body, tip_front, tip_back, sea... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.