angioflow_fix_batch2: UPF_P0277.00_ID1_cut1

.gitattributes

@@ -303,3 +303,10 @@ angioflow_fix_batch2/UPF_P0272.00_ID1_cut1/merged_reconstruction.ply filter=lfs
 angioflow_fix_batch2/UPF_P0272.00_ID1_cut1/mesh.msh filter=lfs diff=lfs merge=lfs -text
 angioflow_fix_batch2/UPF_P0272.00_ID1_cut1/mesh.vtu filter=lfs diff=lfs merge=lfs -text
 angioflow_fix_batch2/UPF_P0272.00_ID1_cut1/reconstruction.ply filter=lfs diff=lfs merge=lfs -text
+angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/clipped_reconstruction.ply filter=lfs diff=lfs merge=lfs -text
+angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/clipped_reconstruction_fallback.ply filter=lfs diff=lfs merge=lfs -text
+angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/dome.ply filter=lfs diff=lfs merge=lfs -text
+angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/merged_reconstruction.ply filter=lfs diff=lfs merge=lfs -text
+angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/mesh.msh filter=lfs diff=lfs merge=lfs -text
+angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/mesh.vtu filter=lfs diff=lfs merge=lfs -text
+angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/reconstruction.ply filter=lfs diff=lfs merge=lfs -text

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/branch_ranking.npy

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:28d4b63fdadd72ed19f8fad1638746569959d59ee50d3e10d67810fced9dc78f
+size 136

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/branch_ranking_fallback.npy

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:28d4b63fdadd72ed19f8fad1638746569959d59ee50d3e10d67810fced9dc78f
+size 136

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/clipped_centerline.npy

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:fa1eecc97446fb0c1240ec3ce353f49fde4ddcf6c1f40b95d5e97f744ab6652d
+size 22493

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/clipped_reconstruction.ply

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:9792797464076f5d23f7b09fabd3c533e1977242f447b0ab2aa8a2b2270a6b31
+size 367789

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/clipped_reconstruction_fallback.ply

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:76d85ea85fd917ea8485735ad1cc85baa3dcd862dee8b0fd4c635e901c056b29
+size 382466

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/dome.ply

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:8432d1d77301a4a76b43e0970df33d287613bec7d6a0a71a132b95a6422c81ee
+size 354160

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/done.txt

@@ -0,0 +1 @@
+done

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/endpoints_manual.npy

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:804ea7a55f14c19d1cb45bf8cb1d3faa6a1fd6f4b1faeca9ee8d6c9eb94d1d4d
+size 612

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/forward_fusion_info.npz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:97f5ec5c4632d4a251239542850c69e46d9125af76435704a1e1d36ec42f979a
+size 7014

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/forward_fusion_info_fallback.npz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:768f7f29572951884231296f9f7711c6f571c024a5ae6ee5858508d1584f5e80
+size 29804

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/fusion_info_extruded.npz

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:1f1850e1db20e63c6ca48e3614fa66eb46ba3931f74164872b533bcd6254822f
+size 7158

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/jnl_transient

@@ -0,0 +1,24 @@
+/file/read-case mesh.msh
+/mesh/scale 0.001 0.001 0.001
+/define/models/unsteady-2nd-order? yes
+/define/models/viscous/laminar yes
+/define/materials/change-create air blood yes constant 1050 no no yes carreau shear-rate-dependent 3.313 0.3568 0.056 0.00345 no no no yes
+/define/boundary-conditions/zone-type 4 velocity-inlet
+/define/boundary-conditions/zone-type 5 pressure-outlet
+/define/user-defined/use-built-in-compiler? yes
+/define/user-defined/compiled-functions compile libudf yes parabolic_vinlet_udf_full.c "" ""
+/define/user-defined/compiled-functions load libudf
+/define/boundary-conditions/set/velocity-inlet surface4 () vmag yes yes udf inlet_x_velocity_transient::libudf quit
+/solve/set/p-v-coupling 24
+/solve/set/p-v-controls 2000000 0.5 0.5
+/solve/monitors/residual/convergence-criteria 0.0001 0.0001 0.0001 0.0001
+/solve/initialize/compute-defaults velocity-inlet surface4
+/solve/initialize/initialize-flow
+/file/transient-export/ensight-gold-transient ensight_files () * () absolute-pressure dynamic-pressure x-velocity y-velocity z-velocity wall-shear x-wall-shear y-wall-shear z-wall-shear dx-velocity-dx dy-velocity-dy dz-velocity-dz dx-velocity-dy dy-velocity-dx dx-velocity-dz dz-velocity-dx dy-velocity-dz dz-velocity-dy dp-dx dp-dy dp-dz dp-dt viscosity-lam x-coordinate y-coordinate z-coordinate quit no yes export-1 time-step 10 yes
+/file/autosave/data-frequency 10
+/solve/set/time-step 0.001
+/solve/dual-time-iterate 1600 100
+/file/write-case mesh_new.cas yes
+/file/write-data mesh_new.dat yes
+exit
+yes

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/merged_centerline.npy

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:f52a92e1bc043989fe5c5334bcf89cbdeb31ec6885728d27a1e118bec00027f2
+size 16001

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/merged_reconstruction.ply

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:413dbd2ee17e4d8b7a8768c8a048833f6dcd3e33451291f0ed1db1c4a6d127b6
+size 345999

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/mesh.msh

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:c5cec7ec4ace26c9ac6f9811be30b55ca14fa8af8d28e5da02de78f74d4e5d20
+size 234121740

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/mesh.vtu

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:356e477956a19d6ed69f3b9bc99d5c5848048d36eab8c449d46591692df388fc
+size 51162787

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/mesh_params.json

@@ -0,0 +1,17 @@
+{
+  "preset": "legacy",
+  "params": {
+    "base_edge": 0.13,
+    "ref_volume": 320.0,
+    "ref_area": 320.0,
+    "vol_exponent": 0.3,
+    "area_exponent": 0.5,
+    "max_edge": 1.0
+  },
+  "inflation": true,
+  "surface": "ghd_surface.vtp",
+  "volume": 25.11591069701418,
+  "area": 291.4658378391009,
+  "edge": 0.13,
+  "n_volume_cells": 3014110
+}

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/parabolic_vinlet_udf_full.c

@@ -0,0 +1,200 @@
+/*
+vprofile_transient_parabolic.c
+UDF for specifying steady-state velocity profile boundary condition
+
+AUTHOR	Wenhao Ding
+DATE	22.03.2024
+
+Instruction:
+define VINREF, the maximum velocity at the center
+define FIXED_TIME_STEP and make sure MAX_PCD_SIZE is larger than int(total_time/FIXED_TIME_STEP)
+define filename (txt for the waveform, this txt file must be in the same directory as this script)
+*/
+
+#include "udf.h"
+#include <math.h>
+#include <stdio.h>
+
+#define PI 3.14159265358979323846
+#define VINREF	1.3158	/* ref inlet v  */
+#define VIN	0	/* ref inlet v  */
+#define MAX_PCD_SIZE 400001  /* Least PCD number the waveform file has cannot exceed point number in txt 574578 41160*/
+#define MAX_LOG_SIZE 600
+#define FIXED_TIME_STEP 0.00001  /* Fixed time step during transient simulation*/
+#define MAX_POINTS 6000 /* Maximum point number on the inlet*/
+#define ND_ND 3
+/* static double* Q_array[MAX_PCD_SIZE]; */
+
+
+typedef struct {
+    double x;
+    double y;
+    double z;
+} Vector3D;
+
+double dot_product(Vector3D v1, Vector3D v2) {
+    return v1.x * v2.x + v1.y * v2.y + v1.z * v2.z;
+}
+
+Vector3D cross_product(Vector3D v1, Vector3D v2) {
+    Vector3D cross_v;
+
+    cross_v.x = v1.y * v2.z - v1.z * v2.y;
+    cross_v.y = v1.z * v2.x - v1.x * v2.z;
+    cross_v.z = v1.x * v2.y - v1.y * v2.x;
+
+    return cross_v;
+}
+
+double get_norm(Vector3D result) {
+    return sqrt(pow(result.x, 2) + pow(result.y, 2) + pow(result.z, 2));
+}
+
+double getDegAngle(Vector3D v1, Vector3D v2) {
+    Vector3D v_cross = cross_product(v1, v2);
+    double radian_angle = atan2(get_norm(v_cross), dot_product(v1, v2));
+    if (v_cross.z < 0) {
+        radian_angle = 2 * PI - radian_angle;
+    }
+    return radian_angle;
+}
+
+
+
+DEFINE_PROFILE(inlet_x_velocity_transient, thread, position)
+{   
+    /*Domain* d;*/
+    /*d = Get_Domain(1);*/
+    /*Thread* tr = Lookup_Thread(d, 5);*/
+    real x[ND_ND]; /* ND_ND=3 for 3D */
+    real curr_x, curr_y, curr_z;
+    face_t f;
+    /* real current_time;  */
+    FILE* rfile; /* declare a FILE pointer */
+    rfile = fopen("udf_waveform_5cycles.txt", "r+");
+    double Q_array[MAX_PCD_SIZE];
+    int i = 0;
+    for (i = 0; i < MAX_PCD_SIZE; i++) {
+        fscanf(rfile, "%lf", &Q_array[i]); /* that supposes one value per line */
+    }fclose(rfile);
+    /* load from csv file */
+    double centroids[MAX_POINTS][ND_ND];
+    int num_points_inlet = 0;
+    FILE* file;
+    char line[256];
+    file = fopen("inlet_centroids.csv", "r");
+    if (file == NULL)
+    {
+        Message("Error: Cannot open file %s\n", "inlet_centroids.csv");
+        return;
+    }
+    fgets(line, sizeof(line), file);
+    num_points_inlet = 0;
+    while (fgets(line, sizeof(line), file) && num_points_inlet < MAX_POINTS)
+    {
+        sscanf(line, "%lf,%lf,%lf", &centroids[num_points_inlet][0], &centroids[num_points_inlet][1], &centroids[num_points_inlet][2]);
+        num_points_inlet++;
+    }
+    fclose(file);
+    /* record average coordinates on the inlet (center) */
+    double center_x = 0.0, center_y = 0.0, center_z = 0.0;
+    for (i = 0; i < num_points_inlet; i++)
+    {
+        center_x += centroids[i][0];
+        center_y += centroids[i][1];
+        center_z += centroids[i][2];
+    }
+
+    if (num_points_inlet > 0)
+    {
+        center_x /= num_points_inlet;
+        center_y /= num_points_inlet;
+        center_z /= num_points_inlet;
+    }
+    /*Message("Average centroid coordinates: x=%lf, y=%lf, z=%lf\n", center_x, center_y, center_z);*/
+    /* get 12 clock tick */
+    double tick_x = 0.0, tick_y = 0.0, tick_z = 0.0;
+    double tick_radius = 0.0;
+    double tick_radius_record = 0.0;
+    for (i = 0; i < num_points_inlet; i++)
+    {
+        tick_radius = sqrt(pow((centroids[i][0] - center_x), 2) + pow((centroids[i][1] - center_y), 2) + pow((centroids[i][2] - center_z), 2));
+        if (tick_radius > tick_radius_record) {
+            tick_x = x[0];
+            tick_y = x[1];
+            tick_z = x[2];
+        }
+        tick_radius_record = tick_radius;
+    }
+
+    /* start spinning and record maximum radius for every sector */
+    int num_sector = 30;
+    double angle = 0.0;
+    int id_sector = 0;
+    double current_radius = 0.0;
+    /* tick & tock vector for cross and dot production */
+    Vector3D v_tick;
+    v_tick.x = tick_x - center_x;
+    v_tick.y = tick_y - center_y;
+    v_tick.z = tick_z - center_z;
+    Vector3D v_tock;
+    double radius_list[num_sector];
+    for (i = 0; i < num_sector; ++i) {
+        radius_list[i] = 0.0;
+    }
+    /* loop and fill radius_list */
+    for (i = 0; i < num_points_inlet; i++)
+    {
+        v_tock.x = centroids[i][0] - center_x;
+        v_tock.y = centroids[i][1] - center_y;
+        v_tock.z = centroids[i][2] - center_z;
+        angle = getDegAngle(v_tick, v_tock);
+        id_sector = floor((angle + PI) / (2 * PI / num_sector));
+        if (id_sector < 0) {
+            id_sector = 0;
+        }
+        if (id_sector >= num_sector) {
+            id_sector = num_sector - 1;
+        }
+        current_radius = sqrt(pow(v_tock.x, 2) + pow(v_tock.y, 2) + pow(v_tock.z, 2));
+        if (current_radius > radius_list[id_sector]) {
+            radius_list[id_sector] = current_radius;
+        }
+    }
+
+        /* clean radius list and check (sometimes there are no nodes in the sector) */
+        for (i = 0; i < num_sector; ++i) {
+            if (radius_list[i] == 0.0) {
+                radius_list[i] = tick_radius_record;
+            }
+        }
+
+    /* assign parabolic profile */
+    begin_f_loop(f, thread)
+    {
+        F_CENTROID(x, f, thread);
+        /* current_time = CURRENT_TIME */
+        int current_time_id = (int)floor(CURRENT_TIME / FIXED_TIME_STEP);
+        double current_Q_ratio = Q_array[current_time_id];
+        curr_x = x[0]; /* x[0] is x coordinate */
+        curr_y = x[1]; /* x[1] is y coordinate */
+        curr_z = x[2]; /* x[2] is z coordinate */
+
+        v_tock.x = x[0] - center_x;
+        v_tock.y = x[1] - center_y;
+        v_tock.z = x[2] - center_z;
+        angle = getDegAngle(v_tick, v_tock);
+        id_sector = floor((angle + PI) / (2 * PI / num_sector));
+        if (id_sector < 0) {
+            id_sector = 0;
+        }
+        if (id_sector >= num_sector) {
+            id_sector = num_sector - 1;
+        }
+        current_radius = radius_list[id_sector];
+
+        /* write inlet velocity profile - need to centre the x,y,z coords and divide by Rref^2 */
+        F_PROFILE(f, thread, position) = current_Q_ratio * VINREF * (1 + VIN) * (1 - (pow((curr_x - center_x), 2) + pow((curr_y - center_y), 2) + pow((curr_z - center_z), 2)) / (current_radius * current_radius));
+    }
+    end_f_loop(f, thread)
+}

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/preprocess_log.txt

@@ -0,0 +1,88 @@
+
+============================================================
+  Session started: 2026-04-22 11:18:35
+============================================================
+
+════════════════════════════════════════════════════════════
+  Processing: UPF_P0277.00_ID1_cut1
+════════════════════════════════════════════════════════════
+
+── Step 1: Centerline extraction ──
+Reading PLY surface file.
+Cleaning surface.
+Triangulating surface.
+Computing centerlines.
+Computing centerlines...
+Centerlines [accept / redo / skip] (default=accept): 
+── Step 2: Vessel clipping ──
+
+Current cut distances (how far from aneurysm to cut each branch):
+  Branch 0 (downstream): 4.0 mm  (branch total: 62.2 mm)
+  Branch 1 (downstream): 4.0 mm  (branch total: 13.1 mm)
+Accept these cut distances? (Y/n):   Dome protection: dome_sac.ply, 1854 vertices protected (dist < 0.50 mm)
+  Clipping: 69496 vertices removed, 1854 dome-protected
+
+  ────────────────────────────────────────────────────────
+  Cut cross-section equivalent diameters (2 openings):
+  ────────────────────────────────────────────────────────
+    Opening 0: D_eq = 2.894 mm  ←  outlet (branch 1)
+    Opening 1: D_eq = 3.340 mm  ←  inlet  (branch 0)
+  ────────────────────────────────────────────────────────
+  Suggested extension length: ~4× diameter for single outlet.
+  ────────────────────────────────────────────────────────
+
+Accept clipping? (Y/n): 
+── Step 3: Vessel extension ──
+
+  Extension modes:
+    centerline           = use original centerline only
+    straight             = straight extension from opening
+    centerline+straight  = original centerline a mm + straight b mm
+
+  Branch 0 (upstream, CL=58.1mm) mode [centerline]:     centerline part a [2.0mm]:     straight part b [2.0mm]:   Branch 1 (downstream, CL=9.0mm) mode [centerline]:     centerline part a [2.0mm]:     straight part b [2.0mm]:   Branch 0: centerline+straight, centerline=5.91 mm, straight=5.00 mm
+  Branch 1: centerline+straight, centerline=3.90 mm, straight=6.00 mm
+Accept vessel extension? (Y/n):   Saved: F:\NUS\labwork\paper3\aneux\PostTr\AneuX\UPF_P0277.00_ID1_cut1\merged_reconstruction.ply
+  Saved: branch_ranking.npy → [0, 1]
+
+── Step 4: Fallback clipping (side-wall sac isolation) ──
+  Clipping the ORIGINAL reconstruction mesh at the parent vessel.
+
+  Parent centerline: upstream branch 0 → neck → downstream branch 1
+  Upstream arc (neck → inlet): 62.2 mm
+  Downstream arc (neck → outlet): 13.1 mm
+
+  Keep upstream (toward inlet) [6.0 mm]:   Keep downstream (toward outlet) [6.0 mm]:   Single centerline: 757 pts, neck at index 624, upstream=0, downstream=1
+  Upstream cut: index 563, arc from neck = 6.1 mm
+  Downstream cut: index 685, arc from neck = 6.1 mm
+  Dome protection: dome_sac.ply, 1854 vertices protected (dist < 0.50 mm)
+  After scalar clip: 15422 vertices
+  Kept component 0 (closest to centroid), removed 1 disconnected parts
+  Saved fallback-clipped mesh → F:\NUS\labwork\paper3\aneux\PostTr\AneuX\UPF_P0277.00_ID1_cut1\clipped_reconstruction_fallback.ply
+Accept fallback clipping? (Y/n): 
+  Fallback clipping rejected.
+  Choose next action:
+    1 = re-try Step 4 with different keep lengths
+    2 = go back to Step 3 (re-do extension)
+  Action [1/2, default=1]: 
+  Parent centerline: upstream branch 0 → neck → downstream branch 1
+  Upstream arc (neck → inlet): 62.2 mm
+  Downstream arc (neck → outlet): 13.1 mm
+
+  Keep upstream (toward inlet) [6.0 mm]:   Keep downstream (toward outlet) [6.0 mm]:   Single centerline: 757 pts, neck at index 624, upstream=0, downstream=1
+  Upstream cut: index 583, arc from neck = 4.1 mm
+  Downstream cut: index 665, arc from neck = 4.1 mm
+  Dome protection: dome_sac.ply, 1854 vertices protected (dist < 0.50 mm)
+  After scalar clip: 11337 vertices
+  Kept component 0 (closest to centroid), removed 2 disconnected parts
+  Saved fallback-clipped mesh → F:\NUS\labwork\paper3\aneux\PostTr\AneuX\UPF_P0277.00_ID1_cut1\clipped_reconstruction_fallback.ply
+Accept fallback clipping? (Y/n):   Fallback clipping accepted → clipped_reconstruction_fallback.ply
+  Saved: forward_fusion_info_fallback.npz (2 branches)
+  Saved: branch_ranking_fallback.npy → [0, 1]
+
+── Step 5: Final review ──
+Accept final mesh? (Y/n): Accept final mesh? (Y/n): 
+  Branch ordering (2 branches):
+    Branch 0 = inlet (upstream)
+    Branch 1 = outlet
+  (Inlet = endpoint 0 from registration, auto-detected as upstream)
+  ✓ UPF_P0277.00_ID1_cut1 complete.

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/reconstruction.ply

@@ -0,0 +1,3 @@
+version https://git-lfs.github.com/spec/v1
+oid sha256:5b431ed862724b49c0b048f0918a42961b49de3ec2435053f891db0c202c9655
+size 3885210

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/reg_mesh_regularization.json

@@ -0,0 +1,122 @@
+{
+  "input": "/media/yaplab2/wd8tb/wenhao/angioflow/cfd/angioflow_fix/UPF_P0277.00_ID1_cut1/merged_reconstruction_remeshed.obj",
+  "tolerance": 0.25,
+  "mode": "millimetre",
+  "dome_sac_mm": null,
+  "stopping": null,
+  "snap_levels": null,
+  "assessment": {
+    "needs_regularization": true,
+    "worst_target_excess_sd": 1.0894317379190415,
+    "tolerance_sd": 0.25,
+    "signed_excess_sd": {
+      "0.3": 1.0894317379190415,
+      "0.5": -0.9752637942223337,
+      "0.8": -1.5629855537504942,
+      "1.0": -1.4290091128005769,
+      "1.2": -1.2392302441729637,
+      "1.6": -0.9633708910385598
+    },
+    "verdict": "rougher_than_reference",
+    "guard_scale": 1.6,
+    "guard_below_band": 1.0334388527014824,
+    "target_scales": [
+      0.3,
+      0.5,
+      0.8,
+      1.0,
+      1.2
+    ],
+    "measured_at_edge": 0.13194732076851365,
+    "edge_after_measurement_remesh": 0.11000302956631224,
+    "remesher": "auto",
+    "n_seeds": 4000,
+    "elapsed_s": 165.47
+  },
+  "forward": {
+    "status": "overshoot_limited",
+    "converged": false,
+    "guard_scale_below_reference_at_input": true,
+    "smoother": "mcf",
+    "remesher": "auto",
+    "sigma_step_mm": 0.08,
+    "tolerance_sd": 0.25,
+    "time_budget_s": null,
+    "overshoot_limit_sd": -1.0,
+    "guard_tolerance_sd": 1.0,
+    "target_scales": [
+      0.3,
+      0.5,
+      0.8,
+      1.0,
+      1.2
+    ],
+    "guard_scale": 1.6,
+    "rounds": 0,
+    "total_sigma_mm": 0.0,
+    "target_edge": 0.13194732076851365,
+    "export_edge": null,
+    "metrics_measured_at_edge": 0.13194732076851365,
+    "n_vertices_in": 20846,
+    "n_vertices_out": 28428,
+    "n_seeds_used": 4000,
+    "elapsed_s": 193.43,
+    "edge_out": 0.11000302956631224,
+    "quality_out": 0.98297565784025,
+    "smoothing_displacement_mm": 0.0,
+    "surface_deviation_vs_original_max_mm": 4.7693635827235235e-06,
+    "surface_deviation_vs_original_mean_mm": 9.186015303761688e-07,
+    "patch_truncation_fraction": {
+      "0.3": 0.0,
+      "0.5": 0.0,
+      "0.8": 0.0,
+      "1.0": 0.0,
+      "1.2": 0.0,
+      "1.6": 0.0
+    },
+    "signed_excess_before": {
+      "0.3": 1.0894317379190415,
+      "0.5": -0.9752637942223337,
+      "0.8": -1.5629855537504942,
+      "1.0": -1.4290091128005769,
+      "1.2": -1.2392302441729637,
+      "1.6": -0.9633708910385598
+    },
+    "signed_excess_after": {
+      "0.3": 1.0894317379190415,
+      "0.5": -0.9752637942223337,
+      "0.8": -1.5629855537504942,
+      "1.0": -1.4290091128005769,
+      "1.2": -1.2392302441729637,
+      "1.6": -0.9633708910385598
+    },
+    "below_band_after": {
+      "0.3": 0.0,
+      "0.5": 0.47726680266375116,
+      "0.8": 1.1385447567317815,
+      "1.0": 1.1022178415680706,
+      "1.2": 1.0489656637518365,
+      "1.6": 1.0334388527014824
+    },
+    "input_inspection": {
+      "n_vertices": 20846,
+      "n_faces": 41537,
+      "bbox_diagonal": 23.616643161800553,
+      "watertight": false,
+      "n_components": 1,
+      "n_degenerate_faces": 0,
+      "edge_mean": 0.12963148696368162,
+      "edge_cv": 0.11776580510024089,
+      "n_boundary_vertices": 155,
+      "warnings": []
+    },
+    "reference_cases": 315
+  },
+  "cap_shift_mm": [
+    0.009602338835445113,
+    0.027267772147317654
+  ],
+  "action": "rejected",
+  "surface_used": "/media/yaplab2/wd8tb/wenhao/angioflow/cfd/angioflow_fix/UPF_P0277.00_ID1_cut1/merged_reconstruction_remeshed.obj",
+  "reason": "regularized surface not used: no smoothing round completed (regularizer status overshoot_limited)"
+}

angioflow_fix_batch2/UPF_P0277.00_ID1_cut1/remesh_info.json

@@ -0,0 +1,12 @@
+{
+ "source": "merged_reconstruction.ply",
+ "method": "mesh_regularizer.remesh(backend='pymeshlab', calibrate=True)",
+ "target_edge_mm": 0.132,
+ "edge_median_mm": 0.12971342758168639,
+ "edge_max_mm": 0.23438854186230854,
+ "area_before": 296.82277927410576,
+ "area_after": 296.6241512782593,
+ "openings": 2,
+ "opening_centroid_shift_mm": 0.03794611565132498,
+ "made_by": "angioflow/debugging/remesh_aneux_merged.py"
+}