ei-cpp-export/edge-impulse-sdk/tensorflow/lite/micro/micro_string.cc

/* Copyright 2018 The TensorFlow Authors. All Rights Reserved.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
==============================================================================*/

// Implements debug logging for numbers by converting them into strings and then
// calling the main DebugLog(char*) function. These are separated into a
// different file so that platforms can just implement the string output version
// of DebugLog() and then get the numerical variations without requiring any
// more code.

#include "edge-impulse-sdk/tensorflow/lite/micro/micro_string.h"

#include <cstdarg>
#include <cstdint>
#include <cstring>

namespace {

// Int formats can need up to 10 bytes for the value plus a single byte for the
// sign.
constexpr int kMaxIntCharsNeeded = 10 + 1;
// Hex formats can need up to 8 bytes for the value plus two bytes for the "0x".
constexpr int kMaxHexCharsNeeded = 8 + 2;

// Float formats can need up to 7 bytes for the fraction plus 3 bytes for "x2^"
// plus 3 bytes for the exponent and a single sign bit.
constexpr float kMaxFloatCharsNeeded = 7 + 3 + 3 + 1;

// All input buffers to the number conversion functions must be this long.
const int kFastToBufferSize = 48;

// Reverses a zero-terminated string in-place.
char* ReverseStringInPlace(char* start, char* end) {
  char* p1 = start;
  char* p2 = end - 1;
  while (p1 < p2) {
    char tmp = *p1;
    *p1++ = *p2;
    *p2-- = tmp;
  }
  return start;
}

// Appends a string to a string, in-place. You need to pass in the maximum
// string length as the second argument.
char* StrCatStr(char* main, int main_max_length, const char* to_append) {
  char* current = main;
  while (*current != 0) {
    ++current;
  }
  char* current_end = main + (main_max_length - 1);
  while ((*to_append != 0) && (current < current_end)) {
    *current = *to_append;
    ++current;
    ++to_append;
  }
  *current = 0;
  return current;
}

// Populates the provided buffer with an ASCII representation of the number.
char* FastUInt32ToBufferLeft(uint32_t i, char* buffer, int base) {
  char* start = buffer;
  do {
    int32_t digit = i % base;
    char character;
    if (digit < 10) {
      character = '0' + digit;
    } else {
      character = 'a' + (digit - 10);
    }
    *buffer++ = character;
    i /= base;
  } while (i > 0);
  *buffer = 0;
  ReverseStringInPlace(start, buffer);
  return buffer;
}

// Populates the provided buffer with an ASCII representation of the number.
char* FastInt32ToBufferLeft(int32_t i, char* buffer) {
  uint32_t u = i;
  if (i < 0) {
    *buffer++ = '-';
    u = -u;
  }
  return FastUInt32ToBufferLeft(u, buffer, 10);
}

// Converts a number to a string and appends it to another.
char* StrCatInt32(char* main, int main_max_length, int32_t number) {
  char number_string[kFastToBufferSize];
  FastInt32ToBufferLeft(number, number_string);
  return StrCatStr(main, main_max_length, number_string);
}

// Converts a number to a string and appends it to another.
char* StrCatUInt32(char* main, int main_max_length, uint32_t number, int base) {
  char number_string[kFastToBufferSize];
  FastUInt32ToBufferLeft(number, number_string, base);
  return StrCatStr(main, main_max_length, number_string);
}

// Populates the provided buffer with ASCII representation of the float number.
// Avoids the use of any floating point instructions (since these aren't
// supported on many microcontrollers) and as a consequence prints values with
// power-of-two exponents.
char* FastFloatToBufferLeft(float f, char* buffer) {
  char* current = buffer;
  char* current_end = buffer + (kFastToBufferSize - 1);
  // Access the bit fields of the floating point value to avoid requiring any
  // float instructions. These constants are derived from IEEE 754.
  const uint32_t sign_mask = 0x80000000;
  const uint32_t exponent_mask = 0x7f800000;
  const int32_t exponent_shift = 23;
  const int32_t exponent_bias = 127;
  const uint32_t fraction_mask = 0x007fffff;
  uint32_t u;
  memcpy(&u, &f, sizeof(int32_t));
  const int32_t exponent =
      ((u & exponent_mask) >> exponent_shift) - exponent_bias;
  const uint32_t fraction = (u & fraction_mask);
  // Expect ~0x2B1B9D3 for fraction.
  if (u & sign_mask) {
    *current = '-';
    current += 1;
  }
  *current = 0;
  // These are special cases for infinities and not-a-numbers.
  if (exponent == 128) {
    if (fraction == 0) {
      current = StrCatStr(current, (current_end - current), "Inf");
      return current;
    } else {
      current = StrCatStr(current, (current_end - current), "NaN");
      return current;
    }
  }
  // 0x007fffff (8388607) represents 0.99... for the fraction, so to print the
  // correct decimal digits we need to scale our value before passing it to the
  // conversion function. This scale should be 10000000/8388608 = 1.1920928955.
  // We can approximate this using multiply-adds and right-shifts using the
  // values in this array. The 1. portion of the number string is printed out
  // in a fixed way before the fraction, below.
  const int32_t scale_shifts_size = 13;
  const int8_t scale_shifts[13] = {3,  4,  8,  11, 13, 14, 17,
                                   18, 19, 20, 21, 22, 23};
  uint32_t scaled_fraction = fraction;
  for (int i = 0; i < scale_shifts_size; ++i) {
    scaled_fraction += (fraction >> scale_shifts[i]);
  }
  *current = '1';
  current += 1;
  *current = '.';
  current += 1;
  *current = 0;

  // Prepend leading zeros to fill in all 7 bytes of the fraction. Truncate
  // zeros off the end of the fraction. Every fractional value takes 7 bytes.
  // For example, 2500 would be written into the buffer as 0002500 since it
  // represents .00025.
  constexpr int kMaxFractionalDigits = 7;

  // Abort early if there is not enough space in the buffer.
  if (current_end - current <= kMaxFractionalDigits) {
    return current;
  }

  // Pre-fill buffer with zeros to ensure zero-truncation works properly.
  for (int i = 1; i < kMaxFractionalDigits; i++) {
    *(current + i) = '0';
  }

  // Track how large the fraction is to add leading zeros.
  char* previous = current;
  current = StrCatUInt32(current, (current_end - current), scaled_fraction, 10);
  int fraction_digits = current - previous;
  int leading_zeros = kMaxFractionalDigits - fraction_digits;

  // Overwrite the null terminator from StrCatUInt32 to ensure zero-trunctaion
  // works properly.
  *current = '0';

  // Shift fraction values and prepend zeros if necessary.
  if (leading_zeros != 0) {
    for (int i = 0; i < fraction_digits; i++) {
      current--;
      *(current + leading_zeros) = *current;
      *current = '0';
    }
    current += kMaxFractionalDigits;
  }

  // Truncate trailing zeros for cleaner logs. Ensure we leave at least one
  // fractional character for the case when scaled_fraction is 0.
  while (*(current - 1) == '0' && (current - 1) > previous) {
    current--;
  }
  *current = 0;
  current = StrCatStr(current, (current_end - current), "*2^");
  current = StrCatInt32(current, (current_end - current), exponent);
  return current;
}

int FormatInt32(char* output, int32_t i) {
  return static_cast<int>(FastInt32ToBufferLeft(i, output) - output);
}

int FormatUInt32(char* output, uint32_t i) {
  return static_cast<int>(FastUInt32ToBufferLeft(i, output, 10) - output);
}

int FormatHex(char* output, uint32_t i) {
  return static_cast<int>(FastUInt32ToBufferLeft(i, output, 16) - output);
}

int FormatFloat(char* output, float i) {
  return static_cast<int>(FastFloatToBufferLeft(i, output) - output);
}

}  // namespace

extern "C" int MicroVsnprintf(char* output, int len, const char* format,
                              va_list args) {
  int output_index = 0;
  const char* current = format;
  // One extra character must be left for the null terminator.
  const int usable_length = len - 1;
  while (*current != '\0' && output_index < usable_length) {
    if (*current == '%') {
      current++;
      switch (*current) {
        case 'd':
          // Cut off log message if format could exceed log buffer length.
          if (usable_length - output_index < kMaxIntCharsNeeded) {
            output[output_index++] = '\0';
            return output_index;
          }
          output_index +=
              FormatInt32(&output[output_index], va_arg(args, int32_t));
          current++;
          break;
        case 'u':
          if (usable_length - output_index < kMaxIntCharsNeeded) {
            output[output_index++] = '\0';
            return output_index;
          }
          output_index +=
              FormatUInt32(&output[output_index], va_arg(args, uint32_t));
          current++;
          break;
        case 'x':
          if (usable_length - output_index < kMaxHexCharsNeeded) {
            output[output_index++] = '\0';
            return output_index;
          }
          output[output_index++] = '0';
          output[output_index++] = 'x';
          output_index +=
              FormatHex(&output[output_index], va_arg(args, uint32_t));
          current++;
          break;
        case 'f':
          if (usable_length - output_index < kMaxFloatCharsNeeded) {
            output[output_index++] = '\0';
            return output_index;
          }
          output_index +=
              FormatFloat(&output[output_index], va_arg(args, double));
          current++;
          break;
        case '%':
          output[output_index++] = *current++;
          break;
        case 's':
          char* string = va_arg(args, char*);
          int string_idx = 0;
          while (string_idx + output_index < usable_length &&
                 string[string_idx] != '\0') {
            output[output_index++] = string[string_idx++];
          }
          current++;
      }
    } else {
      output[output_index++] = *current++;
    }
  }
  output[output_index++] = '\0';
  return output_index;
}

extern "C" int MicroSnprintf(char* output, int len, const char* format, ...) {
  va_list args;
  va_start(args, format);
  int bytes_written = MicroVsnprintf(output, len, format, args);
  va_end(args);
  return bytes_written;
}