Daily Papers

Large Language Model (LLM) inference is hard. The autoregressive Decode phase of the underlying Transformer model makes LLM inference fundamentally different from training. Exacerbated by recent AI trends, the primary challenges are memory and interconnect rather than compute. To address these challenges, we highlight four architecture research opportunities: High Bandwidth Flash for 10X memory capacity with HBM-like bandwidth; Processing-Near-Memory and 3D memory-logic stacking for high memory bandwidth; and low-latency interconnect to speedup communication. While our focus is datacenter AI, we also review their applicability for mobile devices.

Over the last three decades, innovations in the memory subsystem were primarily targeted at overcoming the data movement bottleneck. In this paper, we focus on a specific market trend in memory technology: 3D-stacked memory and caches. We investigate the impact of extending the on-chip memory capabilities in future HPC-focused processors, particularly by 3D-stacked SRAM. First, we propose a method oblivious to the memory subsystem to gauge the upper-bound in performance improvements when data movement costs are eliminated. Then, using the gem5 simulator, we model two variants of LARC, a processor fabricated in 1.5 nm and enriched with high-capacity 3D-stacked cache. With a volume of experiments involving a board set of proxy-applications and benchmarks, we aim to reveal where HPC CPU performance could be circa 2028, and conclude an average boost of 9.77x for cache-sensitive HPC applications, on a per-chip basis. Additionally, we exhaustively document our methodological exploration to motivate HPC centers to drive their own technological agenda through enhanced co-design.

Speculative decoding (SD) has attracted a significant amount of research attention due to the substantial speedup it can achieve for LLM inference. However, despite the high speedups they offer, speculative decoding methods often achieve optimal performance on high-end devices or with a substantial GPU memory overhead. Given limited memory and the necessity of quantization, a high-performing model on a high-end GPU can slow down by up to 7 times. To this end, we propose Skippy Simultaneous Speculative Decoding (or S3D), a cost-effective self-speculative SD method based on simultaneous multi-token decoding and mid-layer skipping. When compared against recent effective open-source SD systems, our method has achieved one of the top performance-memory ratios while requiring minimal architecture changes and training data. Leveraging our memory efficiency, we created a smaller yet more effective SD model based on Phi-3. It is 1.4 to 2 times faster than the quantized EAGLE model and operates in half-precision while using less VRAM.

Constructing compact and informative 3D scene representations is essential for effective embodied exploration and reasoning, especially in complex environments over extended periods. Existing representations, such as object-centric 3D scene graphs, oversimplify spatial relationships by modeling scenes as isolated objects with restrictive textual relationships, making it difficult to address queries requiring nuanced spatial understanding. Moreover, these representations lack natural mechanisms for active exploration and memory management, hindering their application to lifelong autonomy. In this work, we propose 3D-Mem, a novel 3D scene memory framework for embodied agents. 3D-Mem employs informative multi-view images, termed Memory Snapshots, to represent the scene and capture rich visual information of explored regions. It further integrates frontier-based exploration by introducing Frontier Snapshots-glimpses of unexplored areas-enabling agents to make informed decisions by considering both known and potential new information. To support lifelong memory in active exploration settings, we present an incremental construction pipeline for 3D-Mem, as well as a memory retrieval technique for memory management. Experimental results on three benchmarks demonstrate that 3D-Mem significantly enhances agents' exploration and reasoning capabilities in 3D environments, highlighting its potential for advancing applications in embodied AI.

Recent advances in AI agents have increasingly internalized native capabilities into their underlying foundation models, giving rise to multimodal foundation models and large reasoning models. However, agent memory is still primarily implemented through external modules, leaving the native memory capability largely unexplored. In this paper, we take a first step toward this direction by introducing memory foundation models, which empower foundation models with native memory capabilities. We formalize native memory from two perspectives: a persistent and dynamically evolving memory state within the backbone, and native memory procedures that autonomously store and utilize information through model computation. We show that native memory offers advantages in architecture, end-to-end optimization, and efficiency. Based on this formulation, we propose Metis, the first prototype of memory foundation models. Metis introduces a new architecture that equips a foundation model with a native memory state, allowing historical information to be compressed into the model and accessed through memory attention. We construct large-scale memory-specific training data and introduce multiple optimization objectives to acquire these native memory procedures through mid-training. The online memory maintenance of Metis is gradient-free, and the memory update requires only a forward pass. At inference time, all learned model weights remain frozen, while the native memory states are autonomously transformed through standard forward computation. Through extensive experiments, we show that Metis exhibits native memory capabilities and further provide a detailed analysis of its strengths, limitations, and behaviors. To facilitate future research on memory foundation models, we release our project and model checkpoints.

Vision-Language Models (VLMs) exhibit emerging spatial reasoning capabilities, yet they remain unreliable on tasks requiring precise spatial understanding, such as viewpoint reasoning, directional comparison, and distance estimation. In multi-view images and monocular videos, relevant spatial cues are often sparse and distributed across redundant observations, making them difficult to organize and exploit. Reconstruction-based Vision Foundation Models (VFMs) offer a natural way to aggregate such observations into explicit spatial memory, such as point clouds. However, simply exposing reconstruction models as free-form tools is brittle, VLMs may invoke tools incorrectly, skip required spatial transformations, or misuse intermediate results. We propose Reasmory, a framework that formulates spatial reasoning as structured program execution over reconstructed spatial memory. Reasmory constructs explicit 3D memory, augments it with semantically grounded 3D object instances, and introduces a lightweight Domain-Specific Language (DSL) that constrains how VLMs query objects and cameras, transform viewpoints, and render observations during reasoning. Generated programs are parsed and validated before execution, enabling more reliable interaction with spatial memory than unconstrained tool use. Experiments on multi-view image and video spatial reasoning benchmarks show consistent gains of 6--18\% over strong baselines, including GPT-5-mini and Gemini-3-flash, indicating that explicit 3D memory is most useful when accessed through constrained, validated operations rather than free-form tool calls.

Existing GPU libraries often struggle to fully exploit the parallel resources and on-chip memory (SRAM) of GPUs when chaining multiple GPU functions as individual kernels. While Kernel Fusion (KF) techniques like Horizontal Fusion (HF) and Vertical Fusion (VF) can mitigate this, current library implementations often require library developers to manually create fused kernels. Hence, library users rely on limited sets of pre-compiled or template-based fused kernels. This limits the use cases that can benefit from HF and VF and increases development costs. In order to solve these issues, we present a novel methodology for building GPU libraries that enables automatic on-demand HF and VF for arbitrary combinations of GPU library functions. Our methodology defines reusable, fusionable components that users combine via high-level programming interfaces. Leveraging C++17 metaprogramming features available in compilers like nvcc, our methodology generates a single and optimized fused kernel tailored to the user's specific sequence of operations at compile time, without needing a custom compiler or manual development and pre-compilation of kernel combinations. This approach abstracts low-level GPU complexities while maximizing GPU resource utilization and keeping intermediate data in SRAM. We provide an open-source implementation demonstrating significant speedups compared to traditional libraries in various benchmarks, validating the effectiveness of this methodology for improving GPU performance in the range of 2x to more than 1000x, while preserving high-level programmability.

Despite remarkable progress in video generation, maintaining long-term scene consistency upon revisiting previously explored areas remains challenging. Existing solutions rely either on explicitly constructing 3D geometry, which suffers from error accumulation and scale ambiguity, or on naive camera Field-of-View (FoV) retrieval, which typically fails under complex occlusions. To overcome these limitations, we propose I3DM, a novel implicit 3D-aware memory mechanism for consistent video scene generation that bypasses explicit 3D reconstruction. At the core of our approach is a 3D-aware memory retrieval strategy, which leverages the intermediate features of a pre-trained Feed-Forward Novel View Synthesis (FF-NVS) model to score view relevance, enabling robust retrieval even in highly occluded scenarios. Furthermore, to fully utilize the retrieved historical frames, we introduce a 3D-aligned memory injection module. This module implicitly warps historical content to the target view and adaptively conditions the generation on reliable warping regions, leading to improved revisit consistency and accurate camera control. Extensive experiments demonstrate that our method outperforms state-of-the-art approaches, achieving superior revisit consistency, generation fidelity, and camera control precision.

The growing demand for efficient long-sequence modeling on edge devices has propelled widespread adoption of State Space Models (SSMs) like Mamba, due to their superior computational efficiency and scalability. As its autoregressive generation process remains memory-bound, speculative decoding has been proposed that incorporates draft model generation and target model verification. However, directly applying speculative decoding to SSMs faces three key challenges: (1) hidden state backtracking difficulties, (2) tree-based parallel verification incompatibility, and (3) hardware workload mismatch. To address these challenges, we propose SpecMamba, the first FPGA-based accelerator for Mamba with speculative decoding, which features system, algorithm, and hardware co-design. At the system level, we present a memory-aware hybrid backtracking strategy to coordinate both models. At the algorithm level, we propose first-in-first-out (FIFO)-based tree verification with tiling to minimize memory access. At the hardware level, we customize a dataflow that computes linear layers in parallel and SSM layers in series to enable maximal overlapping. Implemented on AMD FPGA platforms (VHK158 and VCK190), SpecMamba achieves a 2.27x speedup over GPU baselines and a 2.85x improvement compared to prior FPGA solutions, while demonstrating 5.41x and 1.26x higher energy efficiency, respectively.

Driven by the development of persistent, self-adapting autonomous agents, equipping these systems with high-fidelity memory access for long-horizon reasoning has emerged as a critical requirement. However, prevalent retrieval-based memory frameworks often follow an incremental processing paradigm that continuously extracts and updates conversational memories into vector databases, relying on semantic retrieval when queried. While this approach is fast, it inherently relies on lossy abstraction, frequently missing contextually critical information and struggling to resolve queries that rely on fine-grained contextual understanding. To address this, we introduce D-Mem, a dual-process memory system. It retains lightweight vector retrieval for routine queries while establishing an exhaustive Full Deliberation module as a high-fidelity fallback. To achieve cognitive economy without sacrificing accuracy, D-Mem employs a Multi-dimensional Quality Gating policy to dynamically bridge these two processes. Experiments on the LoCoMo and RealTalk benchmarks using GPT-4o-mini and Qwen3-235B-Instruct demonstrate the efficacy of our approach. Notably, our Multi-dimensional Quality Gating policy achieves an F1 score of 53.5 on LoCoMo with GPT-4o-mini. This outperforms our static retrieval baseline, Mem0^ast (51.2), and recovers 96.7\% of the Full Deliberation's performance (55.3), while incurring significantly lower computational costs.

3D spatial reasoning is the ability to analyze and interpret the positions, orientations, and spatial relationships of objects within the 3D space. This allows models to develop a comprehensive understanding of the 3D scene, enabling their applicability to a broader range of areas, such as autonomous navigation, robotics, and AR/VR. While large multi-modal models (LMMs) have achieved remarkable progress in a wide range of image and video understanding tasks, their capabilities to perform 3D spatial reasoning on diverse natural images are less studied. In this work we present the first comprehensive 3D spatial reasoning benchmark, 3DSRBench, with 2,772 manually annotated visual question-answer pairs across 12 question types. We conduct robust and thorough evaluation of 3D spatial reasoning capabilities by balancing the data distribution and adopting a novel FlipEval strategy. To further study the robustness of 3D spatial reasoning w.r.t. camera 3D viewpoints, our 3DSRBench includes two subsets with 3D spatial reasoning questions on paired images with common and uncommon viewpoints. We benchmark a wide range of open-sourced and proprietary LMMs, uncovering their limitations in various aspects of 3D awareness, such as height, orientation, location, and multi-object reasoning, as well as their degraded performance on images with uncommon camera viewpoints. Our 3DSRBench provide valuable findings and insights about the future development of LMMs with strong 3D reasoning capabilities. Our project page and dataset is available https://3dsrbench.github.io.

Large vision-language models (VLMs) still struggle with reliable 3D spatial reasoning, a core capability for embodied and physical AI systems. This limitation arises from their inability to capture fine-grained 3D geometry and spatial relationships. While recent efforts have introduced multi-view geometry transformers into VLMs, they typically fuse only the deep-layer features from vision and geometry encoders, discarding rich hierarchical signals and creating a fundamental bottleneck for spatial understanding. To overcome this, we propose SpatialStack, a general hierarchical fusion framework that progressively aligns vision, geometry, and language representations across the model hierarchy. Moving beyond conventional late-stage vision-geometry fusion, SpatialStack stacks and synchronizes multi-level geometric features with the language backbone, enabling the model to capture both local geometric precision and global contextual semantics. Building upon this framework, we develop VLM-SpatialStack, a model that achieves state-of-the-art performance on multiple 3D spatial reasoning benchmarks. Extensive experiments and ablations demonstrate that our multi-level fusion strategy consistently enhances 3D understanding and generalizes robustly across diverse spatial reasoning tasks, establishing SpatialStack as an effective and extensible design paradigm for vision-language-geometry integration in next-generation multimodal physical AI systems.

Owing to the huge success of generative artificial intelligence (AI), large language models (LLMs) have emerged as a core subclass, underpinning applications such as question answering, text generation, and code completion. While fine-tuning these models on domain-specific data can yield significant performance gains, it also poses daunting computational challenges, especially for researchers and small organizations with limited hardware resources. Although SSD offloading (i.e., ZeRO-Infinity) has emerged as a viable strategy to overcome the GPU memory barrier via leveraging both system memory (i.e., CPU DRAM) and storage space (i.e., solid-state devices, SSDs), its design primarily targets model-centric performance issues. As a result, key system-level issues, including system memory fragmentation, inefficient pinned buffer allocation, peak CPU usage spikes, and file system overhead, remain unaddressed, stifling scalability and inflating costs. Such an observation motivates this paper to introduce MemAscend, a framework that systematically tackles the underexplored system memory bottlenecks in SSD-offloaded LLM training, with a focus on resource-constrained environments. By streamlining pinned-memory allocation, eradicating fragmentation, and mitigating peak overhead, MemAscend reclaims a substantial system memory budget, enabling larger models, longer context windows, and higher batch sizes without exceeding modest hardware limits. Across diverse LLM benchmarks, MemAscend reduces peak system-memory consumption by an average of 55.7% compared with standard SSD offloading techniques, lowering the hardware barrier for fine-tuning and unlocking new possibilities for cost-effective large-scale training on limited-resource machines.

Frame-wise action-controlled image-to-video generation is a promising paradigm for interactive world simulation, where each control signal should elicit an immediate visual response. However, maintaining visual fidelity and 3D consistency over long autoregressive rollouts remains challenging. Existing 3D-aware methods often suffer from catastrophic drift due to two impediments: information loss from Latent--RGB Cycling, where generated latents are repeatedly decoded to RGB and re-encoded for future conditioning, and the training--inference gap induced by the error-free hypothesis, where clean training memory fails to match prediction-corrupted inference memory. To address these challenges, we present Robust Dreamer, a memory-augmented framework built around how to design 3D memory and how to use it robustly. First, we introduce Latent Gaussian Memory, which anchors diffusion latents inherited from the generation process to Gaussian primitives and recalls them via latent-space Gaussian splatting. This provides dense, geometry-aware, view-aligned conditioning while avoiding accumulated degradation from repeated VAE conversion. Second, we propose Deviation Learning with Dynamic Deviation Archive, which synthesizes rollout-induced latent deviations through a one-step approximation, stores them by autoregressive stage and denoising timestamp, and injects them into historical memory during training. This exposes the generator to realistic corrupted memory states and teaches internal correction before inference. Experiments on ScanNet, DL3DV, and OmniWorldGame demonstrate state-of-the-art long-horizon performance.

3D Gaussian Splatting (3DGS) has emerged as a dominant novel-view synthesis technique, but its high memory consumption severely limits its applicability on edge devices. A growing number of 3DGS compression methods have been proposed to make 3DGS more efficient, yet most only focus on storage compression and fail to address the critical bottleneck of rendering memory. To address this problem, we introduce MEGS^{2}, a novel memory-efficient framework that tackles this challenge by jointly optimizing two key factors: the total primitive number and the parameters per primitive, achieving unprecedented memory compression. Specifically, we replace the memory-intensive spherical harmonics with lightweight, arbitrarily oriented spherical Gaussian lobes as our color representations. More importantly, we propose a unified soft pruning framework that models primitive-number and lobe-number pruning as a single constrained optimization problem. Experiments show that MEGS^{2} achieves a 50% static VRAM reduction and a 40% rendering VRAM reduction compared to existing methods, while maintaining comparable rendering quality. Project page: https://megs-2.github.io/

Memory is a fundamental component of AI systems, underpinning large language models (LLMs) based agents. While prior surveys have focused on memory applications with LLMs, they often overlook the atomic operations that underlie memory dynamics. In this survey, we first categorize memory representations into parametric, contextual structured, and contextual unstructured and then introduce six fundamental memory operations: Consolidation, Updating, Indexing, Forgetting, Retrieval, and Compression. We systematically map these operations to the most relevant research topics across long-term, long-context, parametric modification, and multi-source memory. By reframing memory systems through the lens of atomic operations and representation types, this survey provides a structured and dynamic perspective on research, benchmark datasets, and tools related to memory in AI, clarifying the functional interplay in LLMs based agents while outlining promising directions for future researchThe paper list, datasets, methods and tools are available at \href{https://github.com/Elvin-Yiming-Du/Survey_Memory_in_AI{https://github.com/Elvin-Yiming-Du/Survey\_Memory\_in\_AI}.}.

Modern large language models (LLMs) increasingly depends on efficient long-context processing and generation mechanisms, including sparse attention, retrieval-augmented generation (RAG), and compressed contextual memory, to support complex reasoning. We show that these optimizations can be unified into a four-step memory processing pipeline: Prepare Memory, Compute Relevancy, Retrieval, and Apply to Inference. Through systematic profiling, we identify a 22%-97% memory processing overhead in LLM inference and strong heterogeneity in its computational characteristics. Motivated by this insight, we argue that heterogeneous systems are well-suited to accelerate memory processing and thus end-to-end inference. We demonstrate this approach on a GPU-FPGA system by offloading sparse, irregular, and memory-bounded operations to FPGAs while retaining compute-intensive operations on GPUs. Evaluated on an AMD MI210 GPU and an Alveo U55C FPGA, our system is 1.04sim2.2times faster and requires 1.11sim4.7times less energy across multiple LLM inference optimizations than the GPU baseline (similar results hold on NVIDIA A100). These results establish heterogeneous systems as a practical direction for efficient LLM memory processing and inform future heterogeneous hardware design.

Monolithic large language models (LLMs) like GPT-4 have paved the way for modern generative AI applications. Training, serving, and maintaining monolithic LLMs at scale, however, remains prohibitively expensive and challenging. The disproportionate increase in compute-to-memory ratio of modern AI accelerators have created a memory wall, necessitating new methods to deploy AI. Composition of Experts (CoE) is an alternative modular approach that lowers the cost and complexity of training and serving. However, this approach presents two key challenges when using conventional hardware: (1) without fused operations, smaller models have lower operational intensity, which makes high utilization more challenging to achieve; and (2) hosting a large number of models can be either prohibitively expensive or slow when dynamically switching between them. In this paper, we describe how combining CoE, streaming dataflow, and a three-tier memory system scales the AI memory wall. We describe Samba-CoE, a CoE system with 150 experts and a trillion total parameters. We deploy Samba-CoE on the SambaNova SN40L Reconfigurable Dataflow Unit (RDU) - a commercial dataflow accelerator architecture that has been co-designed for enterprise inference and training applications. The chip introduces a new three-tier memory system with on-chip distributed SRAM, on-package HBM, and off-package DDR DRAM. A dedicated inter-RDU network enables scaling up and out over multiple sockets. We demonstrate speedups ranging from 2x to 13x on various benchmarks running on eight RDU sockets compared with an unfused baseline. We show that for CoE inference deployments, the 8-socket RDU Node reduces machine footprint by up to 19x, speeds up model switching time by 15x to 31x, and achieves an overall speedup of 3.7x over a DGX H100 and 6.6x over a DGX A100.

The challenge of mapping AI architectures to GPU hardware is creating a critical bottleneck in AI progress. Despite substantial efforts, hand-written custom kernels fail to meet their theoretical performance thresholds, even on well-established operations like linear attention. The diverse hardware capabilities of GPUs might suggest that we need a wide variety of techniques to achieve high performance. However, our work explores whether a small number of key abstractions can drastically simplify the process. We present ThunderKittens (TK), a framework for writing performant AI kernels while remaining easy to use and maintain. Our abstractions map to the three levels of the GPU hierarchy: (1) at the warp-level, we provide 16x16 matrix tiles as basic data structures and PyTorch-like parallel compute operations over tiles, (2) at the thread-block level, we provide a template for overlapping asynchronous operations across parallel warps, and (3) at the grid-level, we provide support to help hide the block launch and tear-down, and memory costs. We show the value of TK by providing kernels that match or outperform prior kernels for a range of AI operations. We match CuBLAS and FlashAttention-3 on GEMM and attention inference performance and outperform the strongest baselines by 10-40% on attention backwards, 8times on state space models, and 14times on linear attention.

Large language models (LLMs) are central to modern natural language processing, delivering exceptional performance in various tasks. However, their intensive computational and memory requirements present challenges, especially for devices with limited DRAM capacity. This paper tackles the challenge of efficiently running LLMs that exceed the available DRAM capacity by storing the model parameters on flash memory but bringing them on demand to DRAM. Our method involves constructing an inference cost model that harmonizes with the flash memory behavior, guiding us to optimize in two critical areas: reducing the volume of data transferred from flash and reading data in larger, more contiguous chunks. Within this flash memory-informed framework, we introduce two principal techniques. First, "windowing'" strategically reduces data transfer by reusing previously activated neurons, and second, "row-column bundling", tailored to the sequential data access strengths of flash memory, increases the size of data chunks read from flash memory. These methods collectively enable running models up to twice the size of the available DRAM, with a 4-5x and 20-25x increase in inference speed compared to naive loading approaches in CPU and GPU, respectively. Our integration of sparsity awareness, context-adaptive loading, and a hardware-oriented design paves the way for effective inference of LLMs on devices with limited memory.

Large language models (LLMs) have emerged due to their capability to generate high-quality content across diverse contexts. To reduce their explosively increasing demands for computing resources, a mixture of experts (MoE) has emerged. The MoE layer enables exploiting a huge number of parameters with less computation. Applying state-of-the-art continuous batching increases throughput; however, it leads to frequent DRAM access in the MoE and attention layers. We observe that conventional computing devices have limitations when processing the MoE and attention layers, which dominate the total execution time and exhibit low arithmetic intensity (Op/B). Processing MoE layers only with devices targeting low-Op/B such as processing-in-memory (PIM) architectures is challenging due to the fluctuating Op/B in the MoE layer caused by continuous batching. To address these challenges, we propose Duplex, which comprises xPU tailored for high-Op/B and Logic-PIM to effectively perform low-Op/B operation within a single device. Duplex selects the most suitable processor based on the Op/B of each layer within LLMs. As the Op/B of the MoE layer is at least 1 and that of the attention layer has a value of 4-8 for grouped query attention, prior PIM architectures are not efficient, which place processing units inside DRAM dies and only target extremely low-Op/B (under one) operations. Based on recent trends, Logic-PIM adds more through-silicon vias (TSVs) to enable high-bandwidth communication between the DRAM die and the logic die and place powerful processing units on the logic die, which is best suited for handling low-Op/B operations ranging from few to a few dozens. To maximally utilize the xPU and Logic-PIM, we propose expert and attention co-processing.

We address the challenge of knowledge composition in Vision-Language Models (VLMs), where accumulating expertise across multiple domains or tasks typically leads to catastrophic forgetting. We introduce GeoStack (Geometric Stacking), a modular framework that allows independently trained domain experts to be composed into a unified model. By imposing geometric and structural constraints on the adapter manifold, GeoStack ensures the foundational knowledge of the base model is preserved. Furthermore, we mathematically demonstrate a weight-folding property that achieves constant-time inference complexity (O(1)), regardless of the number of integrated experts. Experimental results across multi-domain adaptation and class-incremental learning show that GeoStack provides an efficient mechanism for long-term knowledge composition while significantly mitigating catastrophic forgetting. Code is available at https://github.com/QuantitativeImagingLaboratory/GeoStack.

AI coding agents operate in a paradox: they possess vast parametric knowledge yet cannot remember a conversation from an hour ago. Existing memory systems store text in vector databases with single-channel retrieval, require cloud LLMs for core operations, and implement none of the cognitive processes that make human memory effective. We present SuperLocalMemory V3.3 ("The Living Brain"), a local-first agent memory system implementing the full cognitive memory taxonomy with mathematical lifecycle dynamics. Building on the information-geometric foundations of V3.2 (arXiv:2603.14588), we introduce five contributions: (1) Fisher-Rao Quantization-Aware Distance (FRQAD) -- a new metric on the Gaussian statistical manifold achieving 100% precision at preferring high-fidelity embeddings over quantized ones (vs 85.6% for cosine), with zero prior art; (2) Ebbinghaus Adaptive Forgetting with lifecycle-aware quantization -- the first mathematical forgetting curve in local agent memory coupled to progressive embedding compression, achieving 6.7x discriminative power; (3) 7-channel cognitive retrieval spanning semantic, keyword, entity graph, temporal, spreading activation, consolidation, and Hopfield associative channels, achieving 70.4% on LoCoMo in zero-LLM Mode A; (4) memory parameterization implementing Long-Term Implicit memory via soft prompts; (5) zero-friction auto-cognitive pipeline automating the complete memory lifecycle. On LoCoMo, V3.3 achieves 70.4% in Mode A (zero-LLM), with +23.8pp on multi-hop and +12.7pp on adversarial. V3.2 achieved 74.8% Mode A and 87.7% Mode C; the 4.4pp gap reflects a deliberate architectural trade-off. SLM V3.3 is open source under the Elastic License 2.0, runs entirely on CPU, with over 5,000 monthly downloads.

This work presents a novel monolithic 3D (M3D) FPGA architecture that leverages stackable back-end-of-line (BEOL) transistors to implement configuration memory and pass gates, significantly improving area, latency, and power efficiency. By integrating n-type (W-doped In_2O_3) and p-type (SnO) amorphous oxide semiconductor (AOS) transistors in the BEOL, Si SRAM configuration bits are substituted with a less leaky equivalent that can be programmed at logic-compatible voltages. BEOL-compatible AOS transistors are currently under extensive research and development in the device community, with investment by leading foundries, from which reported data is used to develop robust physics-based models in TCAD that enable circuit design. The use of AOS pass gates reduces the overhead of reconfigurable circuits by mapping FPGA switch block (SB) and connection block (CB) matrices above configurable logic blocks (CLBs), thereby increasing the proximity of logic elements and reducing latency. By interfacing with the latest Verilog-to-Routing (VTR) suite, an AOS-based M3D FPGA design implemented in 7 nm technology is demonstrated with 3.4x lower area-time squared product (AT^2), 27% lower critical path latency, and 26% lower reconfigurable routing block power on benchmarks including hyperdimensional computing and large language models (LLMs).

High-Level Synthesis leverages loop unrolling and array partitioning, but scheduling concurrent accesses is challenging when indices contain non-affine arithmetic. Conventional polyhedral frameworks systematically over-approximate these non-linear transformations, forcing conservative serialization that degrades performance. To minimize this bottleneck, we present a spatial verification framework operating at the LLVM Intermediate Representation (IR) level. By extracting flat arithmetic expressions from "getelementptr" instructions, it models memory banks as polymorphic spatial predicates to handle non-affine terms. Structural safety is enforced via a Conflict-Free Unrolling condition using Separation Logic's separating conjunction; concurrent operations targeting the same bank trigger an automatic spatial contradiction. This disjointness requirement is reduced to a matrix of pairwise inequalities over immutable Static Single Assignment (SSA) variables for a Satisfiability Modulo Theories (SMT) oracle. To guarantee safety against undecidable non-linear arithmetic, we implement a deterministic sequential fallback. Finally, a theorem of soundness bridges algebraic SMT verification with Register Transfer Level trace safety, ensuring physical hardware immune to structural memory collisions.

Recent advancements in multi-view scene reconstruction have been significant, yet existing methods face limitations when processing streams of input images. These methods either rely on time-consuming offline optimization or are restricted to shorter sequences, hindering their applicability in real-time scenarios. In this work, we propose LONG3R (LOng sequence streaming 3D Reconstruction), a novel model designed for streaming multi-view 3D scene reconstruction over longer sequences. Our model achieves real-time processing by operating recurrently, maintaining and updating memory with each new observation. We first employ a memory gating mechanism to filter relevant memory, which, together with a new observation, is fed into a dual-source refined decoder for coarse-to-fine interaction. To effectively capture long-sequence memory, we propose a 3D spatio-temporal memory that dynamically prunes redundant spatial information while adaptively adjusting resolution along the scene. To enhance our model's performance on long sequences while maintaining training efficiency, we employ a two-stage curriculum training strategy, each stage targeting specific capabilities. Experiments demonstrate that LONG3R outperforms state-of-the-art streaming methods, particularly for longer sequences, while maintaining real-time inference speed. Project page: https://zgchen33.github.io/LONG3R/.

The deployment of Large Language Models (LLMs) on edge devices is fundamentally constrained by the "Memory Wall" the bottleneck where data movement latency outstrips arithmetic throughput. Standard inference runtimes often incur significant overhead through high-level abstractions, dynamic dispatch, and unaligned memory access patterns. In this work, we present a novel "Virtual Tensor Core" architecture implemented in software, optimized specifically for ARM64 microarchitectures (Apple Silicon). By bypassing standard library containers in favor of direct memory mapping (mmap) and implementing hand-tuned NEON SIMD kernels, we achieve a form of "Software-Defined Direct Memory Access (DMA)." Our proposed Tensor Virtualization Layout (TVL) guarantees 100% cache line utilization for weight matrices, while our zero-copy loader eliminates initialization latency. Experimental results on a 110M parameter model demonstrate a stable throughput of >60 tokens/second on M2 hardware. While proprietary hardware accelerators (e.g., Apple AMX) can achieve higher peak throughput, our architecture provides a fully open, portable, and deterministic reference implementation for studying the memory bottleneck on general-purpose ARM silicon, meeting the 200ms psycholinguistic latency threshold without opaque dependencies.

Memory has evolved into a foundational architectural dimension in large language models (LLMs), shifting from an implicit byproduct of computation to a spectrum of explicit, controllable mechanisms. While recent advances introduce diverse strategies---spanning transient attention, recurrent state dynamics, parameter-efficient adaptations, and scalable lookup storage---this rapid evolution has led to a highly fragmented research landscape. In this survey, we present a systematic, architecture-centric taxonomy of memory in LLMs. Our framework characterizes memory along three orthogonal axes: representation (implicit versus explicit), update dynamics (offline versus online), and persistence (short-term versus long-term). We further formalize the granular mechanisms dictating memory writing, routing, state transitions, and consolidation. This unified perspective elucidates the conceptual boundaries between computation-coupled and independently addressable memory, effectively bridging disparate architectural paradigms. Additionally, we critically analyze hybrid memory architectures, system-level efficiency trade-offs, and multi-dimensional evaluation methodologies. By consolidating these scattered advancements into a cohesive framework, this survey charts the trajectory of memory-centric LLM design and provides a principled foundation for future innovations in scalable and adaptive language modeling.

Graph structures are increasingly used in dialog memory systems, but empirical findings on their effectiveness remain inconsistent, making it unclear which design choices truly matter. We present an experimental, system-oriented analysis of long-term dialog memory architectures. We introduce a unified framework that decomposes dialog memory systems into core components and supports both graph-based and non-graph approaches. Under this framework, we conduct controlled, stage-wise experiments on LongMemEval and HaluMem, comparing common design choices in memory representation, organization, maintenance, and retrieval. Our results show that many performance differences are driven by foundational system settings rather than specific architectural innovations. Based on these findings, we identify stable and reliable strong baselines for future dialog memory research.

Existing Vision Language Models (VLMs) architecturally rooted in "flatland" perception, fundamentally struggle to comprehend real-world 3D spatial intelligence. This failure stems from a dual-bottleneck: input-stage conflict between computationally exorbitant geometric-aware encoders and superficial 2D-only features, and output-stage misalignment where discrete tokenizers are structurally incapable of producing precise, continuous numerical values. To break this impasse, we introduce GEODE (Geometric-Output and Decoupled-Input Engine), a novel architecture that resolves this dual-bottleneck by decoupling 3D reasoning from numerical generation. GEODE augments main VLM with two specialized, plug-and-play modules: Decoupled Rationale Module (DRM) that acts as spatial co-processor, aligning explicit 3D data with 2D visual features via cross-attention and distilling spatial Chain-of-Thought (CoT) logic into injectable Rationale Tokens; and Direct Regression Head (DRH), an "Embedding-as-Value" paradigm which routes specialized control tokens to a lightweight MLP for precise, continuous regression of scalars and 3D bounding boxes. The synergy of these modules allows our 1.5B parameter model to function as a high-level semantic dispatcher, achieving state-of-the-art spatial reasoning performance that rivals 7B+ models.

We present 3D Spatial MultiModal Memory (M3), a multimodal memory system designed to retain information about medium-sized static scenes through video sources for visual perception. By integrating 3D Gaussian Splatting techniques with foundation models, M3 builds a multimodal memory capable of rendering feature representations across granularities, encompassing a wide range of knowledge. In our exploration, we identify two key challenges in previous works on feature splatting: (1) computational constraints in storing high-dimensional features for each Gaussian primitive, and (2) misalignment or information loss between distilled features and foundation model features. To address these challenges, we propose M3 with key components of principal scene components and Gaussian memory attention, enabling efficient training and inference. To validate M3, we conduct comprehensive quantitative evaluations of feature similarity and downstream tasks, as well as qualitative visualizations to highlight the pixel trace of Gaussian memory attention. Our approach encompasses a diverse range of foundation models, including vision-language models (VLMs), perception models, and large multimodal and language models (LMMs/LLMs). Furthermore, to demonstrate real-world applicability, we deploy M3's feature field in indoor scenes on a quadruped robot. Notably, we claim that M3 is the first work to address the core compression challenges in 3D feature distillation.

Training large language models (LLMs) is known to be challenging because of the huge computational and memory capacity requirements. To address these issues, it is common to use a cluster of GPUs with 3D parallelism, which splits a model along the data batch, pipeline stage, and intra-layer tensor dimensions. However, the use of 3D parallelism produces the additional challenge of finding the optimal number of ways on each dimension and mapping the split models onto the GPUs. Several previous studies have attempted to automatically find the optimal configuration, but many of these lacked several important aspects. For instance, the heterogeneous nature of the interconnect speeds is often ignored. While the peak bandwidths for the interconnects are usually made equal, the actual attained bandwidth varies per link in real-world clusters. Combined with the critical path modeling that does not properly consider the communication, they easily fall into sub-optimal configurations. In addition, they often fail to consider the memory requirement per GPU, often recommending solutions that could not be executed. To address these challenges, we propose Pipette, which is an automatic fine-grained LLM training configurator for real-world clusters. By devising better performance models along with the memory estimator and fine-grained individual GPU assignment, Pipette achieves faster configurations that satisfy the memory constraints. We evaluated Pipette on large clusters to show that it provides a significant speedup over the prior art. The implementation of Pipette is available at https://github.com/yimjinkyu1/date2024_pipette.

We propose a novel memory mechanism to build video generators that can explore environments interactively. Similar results have previously been achieved by out-painting 2D views of the scene while incrementally reconstructing its 3D geometry, which quickly accumulates errors, or by video generators with a short context window, which struggle to maintain scene coherence over the long term. To address these limitations, we introduce Surfel-Indexed View Memory (VMem), a mechanism that remembers past views by indexing them geometrically based on the 3D surface elements (surfels) they have observed. VMem enables the efficient retrieval of the most relevant past views when generating new ones. By focusing only on these relevant views, our method produces consistent explorations of imagined environments at a fraction of the computational cost of using all past views as context. We evaluate our approach on challenging long-term scene synthesis benchmarks and demonstrate superior performance compared to existing methods in maintaining scene coherence and camera control.

Designing realistic and functional 3D indoor rooms is essential for a wide range of applications, including interior design, virtual reality, gaming, and embodied AI. While recent MLLM-based approaches have shown great potential for 3D room synthesis from textual descriptions or reference images, text-based methods struggle to capture precise spatial information, and existing image-conditioned agents suffer from instability and infinite looping when tasked with holistic room generation from top-down views. To address these limitations, we propose Code-as-Room, an MLLM-based agentic framework equipped with a structured execution harness, which represents 3D rooms with Blender codes. Given a top-down room image, the framework parses the reference image to extract scene elements and their spatial relationships, and synthesizes executable Blender code for geometry, materials, and lighting in a principled, multi-stage pipeline. A cross-stage memory module is maintained throughout to mitigate context forgetting inherent to existing agent-based frameworks. We further introduce a dedicated benchmark for code-based 3D room synthesis, encompassing various evaluation protocols. Based on our benchmark, comprehensive comparisons against existing agent-based methods are conducted to validate the effectiveness of our proposed execution harness.

Memory plays a key role in enhancing LLMs' performance when deployed to real-world applications. Existing solutions face trade-offs: explicit memory designs based on external storage require complex management and incur storage overhead, while implicit memory designs that store information via parameters struggle with reliable retrieval. In this paper, we propose R^3Mem, a memory network that optimizes both information Retention and Retrieval through Reversible context compression. Specifically, R^3Mem employs virtual memory tokens to compress and encode infinitely long histories, further enhanced by a hierarchical compression strategy that refines information from document- to entity-level for improved assimilation across granularities. For retrieval, R^3Mem employs a reversible architecture, reconstructing raw data by invoking the model backward with compressed information. Implemented via parameter-efficient fine-tuning, it can integrate seamlessly with any Transformer-based model. Experiments demonstrate that our memory design achieves state-of-the-art performance in long-context language modeling and retrieval-augmented generation tasks. It also significantly outperforms conventional memory modules in long-horizon interaction tasks like conversational agents, showcasing its potential for next-generation retrieval systems.

State-of-the-art video object detection methods maintain a memory structure, either a sliding window or a memory queue, to enhance the current frame using attention mechanisms. However, we argue that these memory structures are not efficient or sufficient because of two implied operations: (1) concatenating all features in memory for enhancement, leading to a heavy computational cost; (2) frame-wise memory updating, preventing the memory from capturing more temporal information. In this paper, we propose a multi-level aggregation architecture via memory bank called MAMBA. Specifically, our memory bank employs two novel operations to eliminate the disadvantages of existing methods: (1) light-weight key-set construction which can significantly reduce the computational cost; (2) fine-grained feature-wise updating strategy which enables our method to utilize knowledge from the whole video. To better enhance features from complementary levels, i.e., feature maps and proposals, we further propose a generalized enhancement operation (GEO) to aggregate multi-level features in a unified manner. We conduct extensive evaluations on the challenging ImageNetVID dataset. Compared with existing state-of-the-art methods, our method achieves superior performance in terms of both speed and accuracy. More remarkably, MAMBA achieves mAP of 83.7/84.6% at 12.6/9.1 FPS with ResNet-101. Code is available at https://github.com/guanxiongsun/video_feature_enhancement.

We describe a family of architectures to support transductive inference by allowing memory to grow to a finite but a-priori unknown bound while making efficient use of finite resources for inference. Current architectures use such resources to represent data either eidetically over a finite span ("context" in Transformers), or fading over an infinite span (in State Space Models, or SSMs). Recent hybrid architectures have combined eidetic and fading memory, but with limitations that do not allow the designer or the learning process to seamlessly modulate the two, nor to extend the eidetic memory span. We leverage ideas from Stochastic Realization Theory to develop a class of models called B'MOJO to seamlessly combine eidetic and fading memory within an elementary composable module. The overall architecture can be used to implement models that can access short-term eidetic memory "in-context," permanent structural memory "in-weights," fading memory "in-state," and long-term eidetic memory "in-storage" by natively incorporating retrieval from an asynchronously updated memory. We show that Transformers, existing SSMs such as Mamba, and hybrid architectures such as Jamba are special cases of B'MOJO and describe a basic implementation, to be open sourced, that can be stacked and scaled efficiently in hardware. We test B'MOJO on transductive inference tasks, such as associative recall, where it outperforms existing SSMs and Hybrid models; as a baseline, we test ordinary language modeling where B'MOJO achieves perplexity comparable to similarly-sized Transformers and SSMs up to 1.4B parameters, while being up to 10% faster to train. Finally, we show that B'MOJO's ability to modulate eidetic and fading memory results in better inference on longer sequences tested up to 32K tokens, four-fold the length of the longest sequences seen during training.

Layer fusion techniques are critical to improving the inference efficiency of deep neural networks (DNN) for deployment. Fusion aims to lower inference costs by reducing data transactions between an accelerator's on-chip buffer and DRAM. This is accomplished by grouped execution of multiple operations like convolution and activations together into single execution units - fusion groups. However, on-chip buffer capacity limits fusion group size and optimizing fusion on whole DNNs requires partitioning into multiple fusion groups. Finding the optimal groups is a complex problem where the presence of invalid solutions hampers traditional search algorithms and demands robust approaches. In this paper we incorporate Explainable AI, specifically Graph Explanation Techniques (GET), into layer fusion. Given an invalid fusion group, we identify the operations most responsible for group invalidity, then use this knowledge to recursively split the original fusion group via a greedy tree-based algorithm to minimize DRAM access. We pair our scheme with common algorithms and optimize DNNs on two types of layer fusion: Line-Buffer Depth First (LBDF) and Branch Requirement Reduction (BRR). Experiments demonstrate the efficacy of our scheme on several popular and classical convolutional neural networks like ResNets and MobileNets. Our scheme achieves over 20% DRAM Access reduction on EfficientNet-B3.

Mixture-of-Experts (MoE) models have become the dominant architecture for large-scale language models, yet on-premises serving remains fundamentally memory-bound as batching turns sparse per-token compute into dense memory activation. Memory-centric architectures (PIM, NMP) improve bandwidth but leave compute underutilized under MoE's low arithmetic intensity at high batch sizes. Speculative decoding (SD) trades idle compute for fewer target invocations, yet verification must load experts even for rejected tokens, severely limiting its benefit in MoE especially at low batch sizes. We propose ELMoE-3D, a hybrid-bonding (HB)-based HW-SW co-designed framework that unifies cache-based acceleration and speculative decoding to offer overall speedup across batch sizes. We identify two intrinsic elasticity axes of MoE-expert and bit-and jointly scale them to construct Elastic Self-Speculative Decoding (Elastic-SD), which serves as both an expert cache and a strongly aligned self-draft model accelerated by high HB bandwidth. Our LSB-augmented bit-sliced architecture exploits inherent redundancy in bit-slice representations to natively support bit-nested execution. On our 3D-stacked hardware, ELMoE-3D achieves an average 6.6times speedup and 4.4times energy efficiency gain over naive MoE serving on xPU across batch sizes 1-16, and delivers 2.2times speedup and 1.4times energy efficiency gain over the best-performing prior accelerator baseline.

Unlocking spatial reasoning in Large Multimodal Models (LMMs) is crucial for enabling intelligent interaction with 3D environments. While prior efforts often rely on explicit 3D inputs or specialized model architectures, we ask: can LMMs reason about 3D space using only structured 2D representations derived from perception? We introduce Struct2D, a perception-guided prompting framework that combines bird's-eye-view (BEV) images with object marks and object-centric metadata, optionally incorporating egocentric keyframes when needed. Using Struct2D, we conduct an in-depth zero-shot analysis of closed-source LMMs (e.g., GPT-o3) and find that they exhibit surprisingly strong spatial reasoning abilities when provided with structured 2D inputs, effectively handling tasks such as relative direction estimation and route planning. Building on these insights, we construct Struct2D-Set, a large-scale instruction tuning dataset with 200K fine-grained QA pairs across eight spatial reasoning categories, generated automatically from 3D indoor scenes. We fine-tune an open-source LMM (Qwen2.5VL) on Struct2D-Set, achieving competitive performance on multiple benchmarks, including 3D question answering, dense captioning, and object grounding. Our approach demonstrates that structured 2D inputs can effectively bridge perception and language reasoning in LMMs-without requiring explicit 3D representations as input. We will release both our code and dataset to support future research.

While Chain-of-thought (CoT) reasoning enables LLMs to solve challenging reasoning problems, as KV cache grows linearly with the number of generated tokens, CoT reasoning faces scaling issues in terms of speed and memory usage. In this work, we propose MemoSight (Memory-Foresight-based reasoning), a unified framework that integrates both context compression and multi-token prediction to mitigate the efficiency issues while maintaining CoT reasoning performance. Our framework adopts the same minimalist design for both context compression and multi-token prediction via special tokens and their corresponding position layout tailored to each token type. Comprehensive experiments on four reasoning benchmarks demonstrate that MemoSight reduces the KV cache footprint by up to 66% and accelerates inference by 1.56x, while outperforming existing CoT compression methods.

Transformers and large language models~(LLMs) have seen rapid adoption in all domains. Their sizes have exploded to hundreds of billions of parameters and keep increasing. Under these circumstances, the training of transformers is very expensive and often hits a ``memory wall'', i.e., even when using 3D parallelism (pipeline, tensor, data) and aggregating the memory of many GPUs, it is still not enough to hold the necessary data structures (model parameters, optimizer state, gradients, activations) in GPU memory. To compensate, state-of-the-art approaches offload the optimizer state, at least partially, to the host memory and perform hybrid CPU-GPU computations. However, the management of the combined host-GPU memory is often suboptimal and results in poor overlapping between data movements and computations. This leads to missed opportunities to simultaneously leverage the interconnect bandwidth and computational capabilities of CPUs and GPUs. In this paper, we leverage a key observation that the interleaving of the forward, backward and update phases generate fluctuations in the GPU memory utilization, which can be exploited to dynamically move a part of the optimizer state between the host and the GPU memory at each iteration. To this end, we design and implement \proj, a novel technique to split the LLM into subgroups, whose update phase is scheduled on either the CPU or the GPU based on our proposed performance model that addresses the trade-off between data movement cost, acceleration on the GPUs vs the CPUs, and competition for shared resources. We integrate our approach with DeepSpeed and demonstrate 2.5times faster iterations over state-of-the-art approaches using extensive experiments.

Despite a century of empirical memory research, existing AI agent memory systems rely on system-engineering metaphors (virtual-memory paging, flat LLM storage, Zettelkasten notes), none integrating principles of consolidation, forgetting, and reconsolidation. We present ZenBrain, a multi-layer memory architecture integrating fifteen neuroscience models. It implements seven memory layers (working, short-term, episodic, semantic, procedural, core, cross-context) orchestrated by nine foundational algorithms (Two-Factor Synaptic Model, vmPFC-coupled FSRS, Simulation-Selection sleep, Bayesian confidence, and five more) plus six new Predictive Memory Architecture (PMA) components: a four-channel NeuromodulatorEngine, prediction-error-gated ReconsolidationEngine, TripleCopyMemory with divergent decay, four-dimensional PriorityMap with amygdala fast-path, StabilityProtector (NogoA/HDAC3 analogue), and MetacognitiveMonitor for bias detection. The 15-algorithm ablation reveals a cooperative survival network: under stress, 9 of 15 algorithms become individually critical (delta-Q up to -93.7%, Wilcoxon, 10 seeds, alpha=0.005). Simulation-Selection sleep achieves 37% stability improvement (p<0.005) with 47.4% storage reduction. TripleCopyMemory retains S(t)=0.912 at 30 days; PriorityMap reaches NDCG@10=0.997. Multi-layer routing beats a flat single-layer baseline by 20.7% F1 on LoCoMo (p<0.005) and 19.5% on MemoryArena (p=0.015). On LongMemEval-500, ZenBrain holds the highest mean rank on all 12 system-judge cells (4 systems x 3 LLM judges), three-judge mean J=0.545 vs letta=0.485, a-mem=0.414, mem0=0.394; all 9 pair-wise contrasts clear Bonferroni (alpha=0.05/18, min p=6.2e-31, d in [0.18, 0.52]). Under LongMemEval's binary judge, ZenBrain reaches 91.3% of oracle accuracy at 1/106th the per-query token budget. Open-source with 11,589 automated test cases.

Robotic manipulation policies have made rapid progress in recent years, yet most existing approaches give limited consideration to memory capabilities. Consequently, they struggle to solve tasks that require reasoning over historical observations and maintaining task-relevant information over time, which are common requirements in real-world manipulation scenarios. Although several memory-aware policies have been proposed, systematic evaluation of memory-dependent manipulation remains underexplored, and the relationship between architectural design choices and memory performance is still not well understood. To address this gap, we introduce RMBench, a simulation benchmark comprising 9 manipulation tasks that span multiple levels of memory complexity, enabling systematic evaluation of policy memory capabilities. We further propose Mem-0, a modular manipulation policy with explicit memory components designed to support controlled ablation studies. Through extensive simulation and real-world experiments, we identify memory-related limitations in existing policies and provide empirical insights into how architectural design choices influence memory performance. The website is available at https://rmbench.github.io/.

LLM agents need memory to act consistently over long interactions, yet many systems use additional LLM calls to operate that memory. Generating intermediate records and mediating their retrieval adds recurring token and time costs, while omitted or merged details can obscure the original evidence. We ask whether structured memory access requires generation at all. Zero-Mem introduces zero-token memory operations: no step outside final question answering invokes an LLM or consumes LLM input or output tokens; encoder computation is accounted for separately. Zero-Mem preserves original interaction traces as its source of record. It organizes the traces in two complementary ways. An entity--context graph exposes connections across interactions, while a temporal hierarchy preserves conversational locality and session state. For each query, Zero-Mem weighs the two views, retrieves from both, and follows their structure to recover supporting relations or surrounding context. Deterministic calibration first discards conflicting evidence and then keeps the reader's answer grounded in the retrieved traces. Only the final-QA reader invokes an LLM. Across long-memory and long-context question-answering benchmarks, Zero-Mem achieves competitive performance while eliminating LLM calls and LLM-token consumption from memory operations. With the same final-QA reader and context budget, it reduces memory-operation time cost by 57.6\% relative to the fastest compared baseline. Ablations support the contribution of the two views and their query-dependent coordination. Overall, the results show that structured agent memory need not generate an intermediate representation of the past. After peer review, the code and implementation details will be available at blue{https://github.com/TheMoon0815/Zero-mem}.

Despite rapid progress in large-scale language and vision models, AI agents still suffer from a fundamental limitation: they cannot remember. Without reliable memory, agents catastrophically forget past experiences, struggle with long-horizon reasoning, and fail to operate coherently in multimodal or interactive environments. We introduce MemVerse, a model-agnostic, plug-and-play memory framework that bridges fast parametric recall with hierarchical retrieval-based memory, enabling scalable and adaptive multimodal intelligence. MemVerse maintains short-term memory for recent context while transforming raw multimodal experiences into structured long-term memories organized as hierarchical knowledge graphs. This design supports continual consolidation, adaptive forgetting, and bounded memory growth. To handle real-time demands, MemVerse introduces a periodic distillation mechanism that compresses essential knowledge from long-term memory into the parametric model, allowing fast, differentiable recall while preserving interpretability. Extensive experiments demonstrate that MemVerse significantly improves multimodal reasoning and continual learning efficiency, empowering agents to remember, adapt, and reason coherently across extended interactions.

Video world models that maintain 3D spatial consistency across generated frames typically rely on explicit point cloud memory constructed in RGB space. This design is both computationally expensive, requiring repeated rendering and VAE encoding, and inherently lossy, as the round trip through pixel space discards rich features of the learned latent representation. In this paper, we introduce latent spatial memory for video world models, a persistent 3D cache that stores scene information directly in the diffusion latent space, avoiding pixel-space reconstruction. Building on this, we propose Mirage, a latent-space spatial memory framework that constructs the memory by lifting latent tokens into 3D via depth-guided back-projection and queries it by synthesizing novel views through direct latent-space warping. This unified formulation eliminates both the information loss of pixel-space reconstruction and the computational burden of repeated encoding and rendering. Experiments show that latent spatial memory achieves up to 10.57times faster end-to-end video generation and 55times reduction in memory footprint relative to explicit 3D baselines. Leveraging the geometric prior of the diffusion model, Mirage attains state-of-the-art performance on WorldScore and strong reconstruction quality on RealEstate10K.

3D field-programmable gate arrays (FPGAs) promise higher performance through vertical integration. However, existing placement tools, largely inherited from 2D frameworks, fail to capture the unique delay characteristics and optimization dynamics of 3D fabrics. We introduce a 3D FPGA placement flow that integrates partitioning-based initialization, adaptive cost scheduling, refined delay estimation, and a simulated annealing move set -- all targeted at 3D FPGA architecture. Together, these enhancements improve timing estimates and the exploration of layer assignments during placement. Compared to Verilog-To-Routing (VTR), our experiments show geometric-mean (max) critical-path delay reductions of ~3% (~7%), ~2% (~4%), ~3% (~8%), and ~6% (~18%) for four 3D architectures: 3D CB, 3D CB-O, 3D CB-I, and 3D SB, respectively. We also achieve geometric-mean (max) routed wirelength reductions of ~1% (~3%), ~2% (~8%), < 1% (~5%), and ~5% (~10%), respectively. Our work will be permissively open-sourced on GitHub.

Memory-augmented Large Language Models (LLMs) have demonstrated remarkable consistency during prolonged dialogues by storing relevant memories and incorporating them as context. Such memory-based personalization is also key in on-device settings that allow users to keep their conversations and data private. However, memory-augmented systems typically rely on LLMs that are too costly for local on-device deployment. Even though Small Language Models (SLMs) are more suitable for on-device inference than LLMs, they cannot achieve sufficient performance. Additionally, these LLM-based systems lack native visual capabilities, limiting their applicability in multimodal contexts. In this paper, we introduce (i) MemLoRA, a novel memory system that enables local deployment by equipping SLMs with specialized memory adapters, and (ii) its vision extension MemLoRA-V, which integrates small Vision-Language Models (SVLMs) to memory systems, enabling native visual understanding. Following knowledge distillation principles, each adapter is trained separately for specific memory operationsx2013knowledge extraction, memory update, and memory-augmented generation. Equipped with memory adapters, small models enable accurate on-device memory operations without cloud dependency. On text-only operations, MemLoRA outperforms 10times larger baseline models (e.g., Gemma2-27B) and achieves performance comparable to 60times larger models (e.g., GPT-OSS-120B) on the LoCoMo benchmark. To evaluate visual understanding operations instead, we extend LoCoMo with challenging Visual Question Answering tasks that require direct visual reasoning. On this, our VLM-integrated MemLoRA-V shows massive improvements over caption-based approaches (81.3 vs. 23.7 accuracy) while keeping strong performance in text-based tasks, demonstrating the efficacy of our method in multimodal contexts.

Nowadays, Large Language Models (LLMs) have been trained using extended context lengths to foster more creative applications. However, long context training poses great challenges considering the constraint of GPU memory. It not only leads to substantial activation memory consumption during training, but also incurs considerable memory fragmentation. To facilitate long context training, existing frameworks have adopted strategies such as recomputation and various forms of parallelisms. Nevertheless, these techniques rely on redundant computation or extensive communication, resulting in low Model FLOPS Utilization (MFU). In this paper, we propose MEMO, a novel LLM training framework designed for fine-grained activation memory management. Given the quadratic scaling of computation and linear scaling of memory with sequence lengths when using FlashAttention, we offload memory-consuming activations to CPU memory after each layer's forward pass and fetch them during the backward pass. To maximize the swapping of activations without hindering computation, and to avoid exhausting limited CPU memory, we implement a token-wise activation recomputation and swapping mechanism. Furthermore, we tackle the memory fragmentation issue by employing a bi-level Mixed Integer Programming (MIP) approach, optimizing the reuse of memory across transformer layers. Empirical results demonstrate that MEMO achieves an average of 2.42x and 2.26x MFU compared to Megatron-LM and DeepSpeed, respectively. This improvement is attributed to MEMO's ability to minimize memory fragmentation, reduce recomputation and intensive communication, and circumvent the delays associated with the memory reorganization process due to fragmentation. By leveraging fine-grained activation memory management, MEMO facilitates efficient training of 7B LLM with 1 million sequence length on just 8 A800 GPUs, achieving an MFU of 52.30%.

Encoder-free architectures have been preliminarily explored in the 2D visual domain, yet it remains an open question whether they can be effectively applied to 3D understanding scenarios. In this paper, we present the first comprehensive investigation into the potential of encoder-free architectures to overcome the challenges of encoder-based 3D Large Multimodal Models (LMMs). These challenges include the failure to adapt to varying point cloud resolutions and the point features from the encoder not meeting the semantic needs of Large Language Models (LLMs). We identify key aspects for 3D LMMs to remove the encoder and enable the LLM to assume the role of the 3D encoder: 1) We propose the LLM-embedded Semantic Encoding strategy in the pre-training stage, exploring the effects of various point cloud self-supervised losses. And we present the Hybrid Semantic Loss to extract high-level semantics. 2) We introduce the Hierarchical Geometry Aggregation strategy in the instruction tuning stage. This incorporates inductive bias into the LLM early layers to focus on the local details of the point clouds. To the end, we present the first Encoder-free 3D LMM, ENEL. Our 7B model rivals the current state-of-the-art model, ShapeLLM-13B, achieving 55.0%, 50.92%, and 42.7% on the classification, captioning, and VQA tasks, respectively. Our results demonstrate that the encoder-free architecture is highly promising for replacing encoder-based architectures in the field of 3D understanding. The code is released at https://github.com/Ivan-Tang-3D/ENEL

Memory remains a critical bottleneck for long-horizon robotic manipulation, as standard Vision-Language-Action (VLA) policies often fail when task-relevant cues become occluded or unobservable over time. While existing memory-augmented methods utilize historical context, they either suffer from severe information bottlenecks, incur high latency via decoupled dual systems, or rely on unselective buffers that accumulate massive visual redundancies. To address these limitations, we introduce EventVLA, an end-to-end framework founded on the concept of sparse visual evidence memory that comprises two core components: foundational visual anchors to retain initial and short-term contexts, and a dynamic Keyframe Evidence Memory (KEM) module. Specifically, KEM directly predicts future keyframe probabilities from the VLA's latent embeddings to autonomously capture and store sparse, task-critical visual events. This foresight-driven mechanism empowers the policy to dynamically evaluate the future causal utility of current observations, preserving transient visual evidence before it becomes unobservable. Furthermore, we propose RoboTwin-MeM, a diagnostic benchmark specifically designed to evaluate non-Markovian manipulation tasks with interactive visual evidence. Extensive evaluations show that across 17 memory-requiring simulation tasks and 4 real-world bimanual tasks, EventVLA achieves an average success rate improvement of +40% over state-of-the-art memory-augmented VLAs.

Large language models (LLMs) have demonstrated remarkable success across diverse artificial intelligence tasks, driven by scaling laws that correlate model size and training data with performance improvements. However, this scaling paradigm incurs substantial memory overhead, creating significant challenges for both training and inference. While existing research has primarily addressed parameter and optimizer state memory reduction, activation memory-particularly from feed-forward networks (FFNs)-has become the critical bottleneck, especially when FlashAttention is implemented. In this work, we conduct a detailed memory profiling of LLMs and identify FFN activations as the predominant source to activation memory overhead. Motivated by this, we introduce Mixture-of-Channels (MoC), a novel FFN architecture that selectively activates only the Top-K most relevant channels per token determined by SwiGLU's native gating mechanism. MoC substantially reduces activation memory during pre-training and improves inference efficiency by reducing memory access through partial weight loading into GPU SRAM. Extensive experiments validate that MoC delivers significant memory savings and throughput gains while maintaining competitive model performance.

The recent surge in high-quality visual instruction tuning samples from closed-source vision-language models (VLMs) such as GPT-4V has accelerated the release of open-source VLMs across various model sizes. However, scaling VLMs to improve performance using larger models brings significant computational challenges, especially for deployment on resource-constrained devices like mobile platforms and robots. To address this, we propose VLsI: Verbalized Layers-to-Interactions, a new VLM family in 2B and 7B model sizes, which prioritizes efficiency without compromising accuracy. VLsI leverages a unique, layer-wise distillation process, introducing intermediate "verbalizers" that map features from each layer to natural language space, allowing smaller VLMs to flexibly align with the reasoning processes of larger VLMs. This approach mitigates the training instability often encountered in output imitation and goes beyond typical final-layer tuning by aligning the small VLMs' layer-wise progression with that of the large ones. We validate VLsI across ten challenging vision-language benchmarks, achieving notable performance gains (11.0% for 2B and 17.4% for 7B) over GPT-4V without the need for model scaling, merging, or architectural changes.

Large Language Models (LLMs) are fundamentally constrained by the quadratic computational cost of self-attention and the "Lost in the Middle" phenomenon, where reasoning capabilities degrade as context windows expand. Existing solutions, primarily "Flat RAG" architectures relying on vector databases, treat memory as an unstructured bag of embeddings, failing to capture the hierarchical and temporal structure of long-horizon interactions. This paper presents Aeon, a Neuro-Symbolic Cognitive Operating System that redefines memory as a managed OS resource. Aeon structures memory into a Memory Palace (a spatial index implemented via Atlas, a SIMD-accelerated Page-Clustered Vector Index) and a Trace (a neuro-symbolic episodic graph). This architecture introduces three advances: (1) Symmetric INT8 Scalar Quantization, achieving 3.1x spatial compression and 5.6x math acceleration via NEON SDOT intrinsics; (2) a decoupled Write-Ahead Log (WAL) ensuring crash-recoverability with statistically negligible overhead (<1%); and (3) a Sidecar Blob Arena eliminating the prior 440-character text ceiling via an append-only mmap-backed blob file with generational garbage collection. The Semantic Lookaside Buffer (SLB) exploits conversational locality to achieve sub-5us retrieval latencies, with INT8 vectors dequantized to FP32 on cache insertion to preserve L1-resident lookup performance. Benchmarks on Apple M4 Max demonstrate that the combined architecture achieves 4.70ns INT8 dot product latency, 3.09us tree traversal at 100K nodes (3.4x over FP32), and P99 read latency of 750ns under hostile 16-thread contention via epoch-based reclamation.

Machine learning is a prevalent approach to tame the complexity of design space exploration for domain-specific architectures. Using ML for design space exploration poses challenges. First, it's not straightforward to identify the suitable algorithm from an increasing pool of ML methods. Second, assessing the trade-offs between performance and sample efficiency across these methods is inconclusive. Finally, lack of a holistic framework for fair, reproducible, and objective comparison across these methods hinders progress of adopting ML-aided architecture design space exploration and impedes creating repeatable artifacts. To mitigate these challenges, we introduce ArchGym, an open-source gym and easy-to-extend framework that connects diverse search algorithms to architecture simulators. To demonstrate utility, we evaluate ArchGym across multiple vanilla and domain-specific search algorithms in designing custom memory controller, deep neural network accelerators, and custom SoC for AR/VR workloads, encompassing over 21K experiments. Results suggest that with unlimited samples, ML algorithms are equally favorable to meet user-defined target specification if hyperparameters are tuned; no solution is necessarily better than another (e.g., reinforcement learning vs. Bayesian methods). We coin the term hyperparameter lottery to describe the chance for a search algorithm to find an optimal design provided meticulously selected hyperparameters. The ease of data collection and aggregation in ArchGym facilitates research in ML-aided architecture design space exploration. As a case study, we show this advantage by developing a proxy cost model with an RMSE of 0.61% that offers a 2,000-fold reduction in simulation time. Code and data for ArchGym is available at https://bit.ly/ArchGym.

Pipeline parallelism has been widely explored, but most existing schedules lack a systematic methodology. In this paper, we propose a framework to decompose pipeline schedules as repeating a building block and we show that the lifespan of the building block decides the peak activation memory of the pipeline schedule. Guided by the observations, we find that almost all existing pipeline schedules, to the best of our knowledge, are memory inefficient. To address this, we introduce a family of memory efficient building blocks with controllable activation memory, which can reduce the peak activation memory to 1/2 of 1F1B without sacrificing efficiency, and even to 1/3 with comparable throughput. We can also achieve almost zero pipeline bubbles while maintaining the same activation memory as 1F1B. Our evaluations demonstrate that in pure pipeline parallelism settings, our methods outperform 1F1B by from 7% to 55% in terms of throughput. When employing a grid search over hybrid parallelism hyperparameters in practical scenarios, our proposed methods demonstrate a 16% throughput improvement over the 1F1B baseline for large language models.

Chain-of-Thought (CoT) reasoning has been widely adopted to enhance Large Language Models (LLMs) by decomposing complex tasks into simpler, sequential subtasks. However, extending CoT to vision-language reasoning tasks remains challenging, as it often requires interpreting transitions of visual states to support reasoning. Existing methods often struggle with this due to limited capacity of modeling visual state transitions or incoherent visual trajectories caused by fragmented architectures. To overcome these limitations, we propose Uni-CoT, a Unified Chain-of-Thought framework that enables coherent and grounded multimodal reasoning within a single unified model. The key idea is to leverage a model capable of both image understanding and generation to reason over visual content and model evolving visual states. However, empowering a unified model to achieve that is non-trivial, given the high computational cost and the burden of training. To address this, Uni-CoT introduces a novel two-level reasoning paradigm: A Macro-Level CoT for high-level task planning and A Micro-Level CoT for subtask execution. This design significantly reduces the computational overhead. Furthermore, we introduce a structured training paradigm that combines interleaved image-text supervision for macro-level CoT with multi-task objectives for micro-level CoT. Together, these innovations allow Uni-CoT to perform scalable and coherent multi-modal reasoning. Furthermore, thanks to our design, all experiments can be efficiently completed using only 8 A100 GPUs with 80GB VRAM each. Experimental results on reasoning-driven image generation benchmark (WISE) and editing benchmarks (RISE and KRIS) indicates that Uni-CoT demonstrates SOTA performance and strong generalization, establishing Uni-CoT as a promising solution for multi-modal reasoning. Project Page and Code: https://sais-fuxi.github.io/projects/uni-cot/

Training 3D Gaussian Splatting (3DGS) at billion-primitive scale is fundamentally memory-bound: each Gaussian primitive carries a large attribute vector, and the aggregate parameter table quickly exceeds GPU capacity, limiting prior systems to tens of millions of Gaussians on commodity single-GPU hardware. We observe that 3DGS training is inherently sparse and trajectory-conditioned: each iteration activates only the Gaussians visible from the current camera batch, so GPU memory can serve as a working-set cache rather than a persistent parameter store. Building on this insight, we introduce TideGS, an out-of-core training framework that manages parameters across an SSD-CPU-GPU hierarchy via three synergistic techniques: block-virtualized geometry for SSD-aligned spatial locality, a hierarchical asynchronous pipeline to overlap I/O with computation, and trajectory-adaptive differential streaming that transfers only incremental working-set deltas between iterations. Experiments show that TideGS enables training with over one billion Gaussians on a single 24 GB GPU while achieving the best reconstruction quality among evaluated single-GPU baselines on large-scale scenes, scaling beyond prior out-of-core baselines (e.g., approximately 100M Gaussians) and standard in-memory training (e.g., approximately 11M Gaussians).

While 4-bit quantization has emerged as a memory-optimal choice for non-reasoning models and zero-shot tasks across scales, we show that this universal prescription fails for reasoning models, where the KV cache rather than model size can dominate memory. Through systematic experiments across 1,700 inference scenarios on AIME25 and GPQA-Diamond, we find a scale-dependent trade-off: models with an effective size below 8-bit 4B parameters achieve better accuracy by allocating memory to more weights rather than longer generation, while larger models achieve better accuracy by allocating memory to longer generations. This scale threshold also determines when parallel scaling becomes memory-efficient and whether KV cache eviction outperforms KV quantization. Our findings show that memory optimization for LLMs cannot be scale-agnostic, while providing principled guidelines: for small reasoning models, prioritize model capacity over test-time compute, while for larger ones, maximize test-time compute. Our results suggest that optimizing reasoning models for deployment requires fundamentally different strategies from those established for non-reasoning models.

We report on the first large-scale mixture-of-experts (MoE) pretraining study on pure AMD hardware, utilizing both MI300X GPUs with Pollara interconnect. We distill practical guidance for both systems and model design. On the systems side, we deliver a comprehensive cluster and networking characterization: microbenchmarks for all core collectives (all-reduce, reduce-scatter, all-gather, broadcast) across message sizes and GPU counts on Pollara. To our knowledge, this is the first at this scale. We further provide MI300X microbenchmarks on kernel sizing and memory bandwidth to inform model design. On the modeling side, we introduce and apply MI300X-aware transformer sizing rules for attention and MLP blocks and justify MoE widths that jointly optimize training throughput and inference latency. We describe our training stack in depth, including often-ignored utilities such as fault-tolerance and checkpoint-reshaping, as well as detailed information on our training recipe. We also provide a preview of our model architecture and base model - ZAYA1 (760M active, 8.3B total parameters MoE) - which will be further improved upon in forthcoming papers. ZAYA1-base achieves performance comparable to leading base models such as Qwen3-4B and Gemma3-12B at its scale and larger, and outperforms models including Llama-3-8B and OLMoE across reasoning, mathematics, and coding benchmarks. Together, these results demonstrate that the AMD hardware, network, and software stack are mature and optimized enough for competitive large-scale pretraining.

Reconstructing dense geometry for dynamic scenes from a monocular video is a critical yet challenging task. Recent memory-based methods enable efficient online reconstruction, but they fundamentally suffer from a Memory Demand Dilemma: The memory representation faces an inherent conflict between the long-term stability required for static structures and the rapid, high-fidelity detail retention needed for dynamic motion. This conflict forces existing methods into a compromise, leading to either geometric drift in static structures or blurred, inaccurate reconstructions of dynamic objects. To address this dilemma, we propose Mem4D, a novel framework that decouples the modeling of static geometry and dynamic motion. Guided by this insight, we design a dual-memory architecture: 1) The Transient Dynamics Memory (TDM) focuses on capturing high-frequency motion details from recent frames, enabling accurate and fine-grained modeling of dynamic content; 2) The Persistent Structure Memory (PSM) compresses and preserves long-term spatial information, ensuring global consistency and drift-free reconstruction for static elements. By alternating queries to these specialized memories, Mem4D simultaneously maintains static geometry with global consistency and reconstructs dynamic elements with high fidelity. Experiments on challenging benchmarks demonstrate that our method achieves state-of-the-art or competitive performance while maintaining high efficiency. Codes will be publicly available.

Despite recent advances in multimodal content generation enabled by vision-language models (VLMs), their ability to reason about and generate structured 3D scenes remains largely underexplored. This limitation constrains their utility in spatially grounded tasks such as embodied AI, immersive simulations, and interactive 3D applications. We introduce a new paradigm that enables VLMs to generate, understand, and edit complex 3D environments by injecting a continually evolving spatial context. Constructed from multimodal input, this context consists of three components: a scene portrait that provides a high-level semantic blueprint, a semantically labeled point cloud capturing object-level geometry, and a scene hypergraph that encodes rich spatial relationships, including unary, binary, and higher-order constraints. Together, these components provide the VLM with a structured, geometry-aware working memory that integrates its inherent multimodal reasoning capabilities with structured 3D understanding for effective spatial reasoning. Building on this foundation, we develop an agentic 3D scene generation pipeline in which the VLM iteratively reads from and updates the spatial context. The pipeline features high-quality asset generation with geometric restoration, environment setup with automatic verification, and ergonomic adjustment guided by the scene hypergraph. Experiments show that our framework can handle diverse and challenging inputs, achieving a level of generalization not observed in prior work. Further results demonstrate that injecting spatial context enables VLMs to perform downstream tasks such as interactive scene editing and path planning, suggesting strong potential for spatially intelligent systems in computer graphics, 3D vision, and embodied applications.

Recent advances in large language models have brought immense value to the world, with their superior capabilities stemming from the massive number of parameters they utilize. However, even the GPUs with the highest memory capacities, currently peaking at 80GB, are far from sufficient to accommodate these vast parameters and their associated optimizer states when conducting stochastic gradient descent-based optimization. One approach to hosting such huge models is to aggregate device memory from many GPUs. However, this approach introduces prohibitive costs for most academic researchers, who always have a limited budget for many high-end GPU servers. In this paper, we focus on huge model fine-tuning on a single, even low-end, GPU in a commodity server, which is accessible to most AI researchers. In such a scenario, the state-of-the-art work ZeRO-Infinity suffers from two severe issues when running in a commodity server: 1) low GPU utilization due to inefficient swapping, and 2) limited trainable model size due to CPU memory capacity. The underlying reason is that ZeRO-Infinity is optimized for running on high-end GPU servers. To this end, we present Fuyou, a low-cost training framework that enables efficient 100B huge model fine-tuning on a low-end server with a low-end GPU and limited CPU memory capacity. The key idea is to add the SSD-CPU communication as an optimization dimension and thus carefully co-optimize computation and data swapping from a systematic approach to maximize GPU utilization. The experimental results show that 1) Fuyou is able to fine-tune 175B GPT-3 on a consumer GPU RTX 4090 with high GPU utilization, while ZeRO-Infinity fails to fine-tune; and 2) when training a small GPT-3 13B model, Fuyou achieves 156 TFLOPS on an RTX 4090 GPU while ZeRO-Infinity only achieves 45 TFLOPS.

Recent advances in generalizable 3D Gaussian Splatting (3DGS) have enabled rapid 3D scene reconstruction within seconds, eliminating the need for per-scene optimization. However, existing methods primarily follow an offline reconstruction paradigm, lacking the capacity for continuous reconstruction, which limits their applicability to online scenarios such as robotics and VR/AR. In this paper, we introduce OnlineX, a feed-forward framework that reconstructs both 3D visual appearance and language fields in an online manner using only streaming images. A key challenge in online formulation is the cumulative drift issue, which is rooted in the fundamental conflict between two opposing roles of the memory state: an active role that constantly refreshes to capture high-frequency local geometry, and a stable role that conservatively accumulates and preserves the long-term global structure. To address this, we introduce a decoupled active-to-stable state evolution paradigm. Our framework decouples the memory state into a dedicated active state and a persistent stable state, and then cohesively fuses the information from the former into the latter to achieve both fidelity and stability. Moreover, we jointly model visual appearance and language fields and incorporate an implicit Gaussian fusion module to enhance reconstruction quality. Experiments on mainstream datasets demonstrate that our method consistently outperforms prior work in novel view synthesis and semantic understanding, showcasing robust performance across input sequences of varying lengths with real-time inference speed.

Multi-view Stereo (MVS) with known camera parameters is essentially a 1D search problem within a valid depth range. Recent deep learning-based MVS methods typically densely sample depth hypotheses in the depth range, and then construct prohibitively memory-consuming 3D cost volumes for depth prediction. Although coarse-to-fine sampling strategies alleviate this overhead issue to a certain extent, the efficiency of MVS is still an open challenge. In this work, we propose a novel method for highly efficient MVS that remarkably decreases the memory footprint, meanwhile clearly advancing state-of-the-art depth prediction performance. We investigate what a search strategy can be reasonably optimal for MVS taking into account of both efficiency and effectiveness. We first formulate MVS as a binary search problem, and accordingly propose a generalized binary search network for MVS. Specifically, in each step, the depth range is split into 2 bins with extra 1 error tolerance bin on both sides. A classification is performed to identify which bin contains the true depth. We also design three mechanisms to respectively handle classification errors, deal with out-of-range samples and decrease the training memory. The new formulation makes our method only sample a very small number of depth hypotheses in each step, which is highly memory efficient, and also greatly facilitates quick training convergence. Experiments on competitive benchmarks show that our method achieves state-of-the-art accuracy with much less memory. Particularly, our method obtains an overall score of 0.289 on DTU dataset and tops the first place on challenging Tanks and Temples advanced dataset among all the learning-based methods. The trained models and code will be released at https://github.com/MiZhenxing/GBi-Net.

Memory-augmented robotic policies are essential in handling memory-dependent tasks. However, existing approaches typically rely on simply extending the observation window, struggling to simultaneously achieve precise task-state tracking and robust long-horizon retention. To overcome these challenges, inspired by the Atkinson--Shiffrin memory model, we propose MemoAct, a hierarchical memory-augmented policy that leverages distinct memory tiers to tackle specific bottlenecks. Specifically, sensory memory filters immediate perceptual inputs, lossless short-term memory supports precise task-state tracking, and compressed long-term memory facilitates robust long-horizon retention. To enrich the evaluation landscape, we construct MemoryRTBench based on RoboTwin 2.0, comprising 6 manipulation tasks that systematically evaluate policy memory capabilities across three dimensions: sequential, spatial, and episodic memory. Extensive experiments across simulated and real-world scenarios demonstrate that MemoAct achieves superior performance compared to both existing Markovian baselines and history-aware policies. The project page is available at https://tlf-tlf.github.io/MemoActPage/.

Large Language Models (LLMs) have emerged as foundational infrastructure in the pursuit of Artificial General Intelligence (AGI). Despite their remarkable capabilities in language perception and generation, current LLMs fundamentally lack a unified and structured architecture for handling memory. They primarily rely on parametric memory (knowledge encoded in model weights) and ephemeral activation memory (context-limited runtime states). While emerging methods like Retrieval-Augmented Generation (RAG) incorporate plaintext memory, they lack lifecycle management and multi-modal integration, limiting their capacity for long-term knowledge evolution. To address this, we introduce MemOS, a memory operating system designed for LLMs that, for the first time, elevates memory to a first-class operational resource. It builds unified mechanisms for representation, organization, and governance across three core memory types: parametric, activation, and plaintext. At its core is the MemCube, a standardized memory abstraction that enables tracking, fusion, and migration of heterogeneous memory, while offering structured, traceable access across tasks and contexts. MemOS establishes a memory-centric execution framework with strong controllability, adaptability, and evolvability. It fills a critical gap in current LLM infrastructure and lays the groundwork for continual adaptation, personalized intelligence, and cross-platform coordination in next-generation intelligent systems.

While memory systems are essential for agent architectures, pervasive architectural fragmentation restricts systematic research. Existing implementations typically couple different stages of the memory lifecycle, entangle evaluation logic with specific datasets, and provide limited support for the management of heterogeneous memory types. We introduce MemTools, an interoperability research framework that decouples memory system components from their underlying deployment environments. MemTools standardizes the memory lifecycle through declarative data contracts, enabling the interchangeable assembly of components across different systems. It orthogonally separates benchmark datasets from execution protocols to facilitate controlled assessments. Furthermore, MemTools provides a unified computational interface for coordinating symbolic, neural, and multimodal memory representations within a shared runtime. Empirical evaluations on cross-system component integration, evaluation protocol reconfiguration, and heterogeneous memory coordination demonstrate that MemTools enables systematic isolation and analysis of memory design variables. These findings suggest that MemTools provides a practical and extensible infrastructure for advancing principled research on agent memory.

Memory systems are key components that enable AI systems such as LLMs and AI agents to achieve long-term learning and sustained interaction. However, during memory storage and retrieval, these systems frequently exhibit memory hallucinations, including fabrication, errors, conflicts, and omissions. Existing evaluations of memory hallucinations are primarily end-to-end question answering, which makes it difficult to localize the operational stage within the memory system where hallucinations arise. To address this, we introduce the Hallucination in Memory Benchmark (HaluMem), the first operation level hallucination evaluation benchmark tailored to memory systems. HaluMem defines three evaluation tasks (memory extraction, memory updating, and memory question answering) to comprehensively reveal hallucination behaviors across different operational stages of interaction. To support evaluation, we construct user-centric, multi-turn human-AI interaction datasets, HaluMem-Medium and HaluMem-Long. Both include about 15k memory points and 3.5k multi-type questions. The average dialogue length per user reaches 1.5k and 2.6k turns, with context lengths exceeding 1M tokens, enabling evaluation of hallucinations across different context scales and task complexities. Empirical studies based on HaluMem show that existing memory systems tend to generate and accumulate hallucinations during the extraction and updating stages, which subsequently propagate errors to the question answering stage. Future research should focus on developing interpretable and constrained memory operation mechanisms that systematically suppress hallucinations and improve memory reliability.

Spatial reasoning is a critical capability for intelligent robots, yet current vision-language models (VLMs) still fall short of human-level performance in video-based spatial reasoning. This gap mainly stems from two challenges: a semantic-geometric misalignment that prevents consistent 3D understanding, and the absence of persistent memory to retain 3D representation and understanding over time. To address these limitations, we present VLM^2, a Vision-Language Model with persistent Memory for spatial reasoning with a view-consistent, 3D-aware representation purely from 2D video. Specifically, to enhance long-horizon reasoning, we incorporate a dual-memory module, consisting of a working memory that operates as a sliding window to focus on immediate context, and an episodic memory that consolidates and stores critical long-term information. This design enables efficient and long-horizon spatial reasoning with a fixed computational cost. Extensive experiments on multiple benchmarks show that VLM^2 achieves state-of-the-art performance among video-only models, significantly advancing the frontier of visual-spatial intelligence.

Episodic memory allows LLM agents to accumulate and retrieve experience, but current methods treat each memory independently, i.e., evaluating retrieval quality in isolation without accounting for the dependency chains through which memories enable the creation of future memories. We introduce MemQ, which applies TD(λ) eligibility traces to memory Q-values, propagating credit backward through a provenance DAG that records which memories were retrieved when each new memory was created. Credit weight decays as (γλ)^d with DAG depth d, replacing temporal distance with structural proximity. We formalize the setting as an Exogenous-Context MDP, whose factored transition decouples the exogenous task stream from the endogenous memory store. Across six benchmarks, spanning OS interaction, function calling, code generation, multimodal reasoning, embodied reasoning, and expert-level QA, MemQ achieves the highest success rate on all six in generalization evaluation and runtime learning, with gains largest on multi-step tasks that produce deep and relevant provenance chains (up to +5.7~pp) and smallest on single-step classification (+0.77~pp) where single-step updates already suffice. We further study how γ and λ interact with the EC-MDP structure, providing principled guidance for parameter selection and future research. Code is available at https://github.com/jwliao-ai/MemQ.

While inference-time scaling enables LLMs to carry out increasingly long and capable reasoning traces, the patterns and insights uncovered during these traces are immediately discarded once the context window is reset for a new query. External memory is a natural way to persist these discoveries, and recent work has shown clear benefits for reasoning-intensive tasks. We see an opportunity to make such memories more broadly reusable and scalable by moving beyond instance-based memory entries (e.g. exact query/response pairs, or summaries tightly coupled with the original problem context) toward concept-level memory: reusable, modular abstractions distilled from solution traces and stored in natural language. For future queries, relevant concepts are selectively retrieved and integrated into the prompt, enabling test-time continual learning without weight updates. Our design introduces new strategies for abstracting takeaways from rollouts and retrieving entries for new queries, promoting reuse and allowing memory to expand with additional experiences. We evaluate on ARC-AGI, a benchmark that stresses compositional generalization and abstract reasoning, making it a natural fit for concept memory. Our method yields a 7.5% relative gain over a strong no-memory baseline with performance continuing to scale with inference compute. We find abstract concepts to be the most consistent memory design, outscoring the baseline at all tested inference compute scales. Moreover, dynamically updating memory during test-time outperforms fixed settings, supporting the hypothesis that accumulating and abstracting patterns enables further solutions in a form of self-improvement. Code is available at https://github.com/matt-seb-ho/arc_memo.

Recent memory agents improve LLMs by extracting experiences and conversation history into an external storage. This enables low-overhead context assembly and online memory update without expensive LLM training. However, existing solutions remain passive and reactive; memory growth is bounded by information that happens to be available, while memory agents seldom seek external inputs in uncertainties. We propose autonomous memory agents that actively acquire, validate, and curate knowledge at a minimum cost. U-Mem materializes this idea via (i) a cost-aware knowledge-extraction cascade that escalates from cheap self/teacher signals to tool-verified research and, only when needed, expert feedback, and (ii) semantic-aware Thompson sampling to balance exploration and exploitation over memories and mitigate cold-start bias. On both verifiable and non-verifiable benchmarks, U-Mem consistently beats prior memory baselines and can surpass RL-based optimization, improving HotpotQA (Qwen2.5-7B) by 14.6 points and AIME25 (Gemini-2.5-flash) by 7.33 points.

As multi-modal models advance towards long-form video understanding, memory emerges as a critical capability. Despite substantial efforts in developing video datasets and benchmarks, existing works primarily focus on perception and reasoning, without systematically evaluating memory: what models retain, how faithfully information is preserved, and how robust memory remains under interference. To address this gap, we introduce M^3Eval, the first comprehensive evaluation framework and benchmark for probing different memory dimensions in multi-modal models. Grounded in cognitive psychology, our design features carefully constructed tasks that isolate key aspects of memory. Leveraging M^3Eval, we conduct extensive experiments across representative multi-modal models, revealing consistent weaknesses and distinctive behaviors. We find that models struggle to maintain disentangled representations when processing parallel video streams, exhibit interference patterns differing substantially from those observed in human memory, ground memory sources more reliably in the spatial domain than the temporal domain, and demonstrate limited symbolic memory. Collectively, our benchmark provides a valuable resource for future research, while our findings highlight memory as a fundamental yet underexplored capability and offer insights for designing more effective memory mechanisms in multi-modal models. Our code and dataset are available at https://pku-value-lab.github.io/m3eval-homepage.

Multi-modal large language models (MLLMs) have shown incredible capabilities in a variety of 2D vision and language tasks. We extend MLLMs' perceptual capabilities to ground and reason about images in 3-dimensional space. To that end, we first develop a large-scale pre-training dataset for 2D and 3D called LV3D by combining multiple existing 2D and 3D recognition datasets under a common task formulation: as multi-turn question-answering. Next, we introduce a new MLLM named Cube-LLM and pre-train it on LV3D. We show that pure data scaling makes a strong 3D perception capability without 3D specific architectural design or training objective. Cube-LLM exhibits intriguing properties similar to LLMs: (1) Cube-LLM can apply chain-of-thought prompting to improve 3D understanding from 2D context information. (2) Cube-LLM can follow complex and diverse instructions and adapt to versatile input and output formats. (3) Cube-LLM can be visually prompted such as 2D box or a set of candidate 3D boxes from specialists. Our experiments on outdoor benchmarks demonstrate that Cube-LLM significantly outperforms existing baselines by 21.3 points of AP-BEV on the Talk2Car dataset for 3D grounded reasoning and 17.7 points on the DriveLM dataset for complex reasoning about driving scenarios, respectively. Cube-LLM also shows competitive results in general MLLM benchmarks such as refCOCO for 2D grounding with (87.0) average score, as well as visual question answering benchmarks such as VQAv2, GQA, SQA, POPE, etc. for complex reasoning. Our project is available at https://janghyuncho.github.io/Cube-LLM.

Long-term conversational agents need memory systems that capture relationships between events, not merely isolated facts, to support temporal reasoning and multi-hop question answering. Current approaches face a fundamental trade-off: flat memory is efficient but fails to model relational structure, while graph-based memory enables structured reasoning at the cost of expensive and fragile construction. To address these issues, we propose StructMem, a structure-enriched hierarchical memory framework that preserves event-level bindings and induces cross-event connections. By temporally anchoring dual perspectives and performing periodic semantic consolidation, StructMem improves temporal reasoning and multi-hop performance on LoCoMo, while substantially reducing token usage, API calls, and runtime compared to prior memory systems, see https://github.com/zjunlp/LightMem .

In this paper, we claim that 3D visual grounding is the cornerstone of spatial reasoning and introduce the Grounded-Spatial Reasoner (GS-Reasoner) to explore the effective spatial representations that bridge the gap between them. Existing 3D LLMs suffer from the absence of a unified 3D representation capable of jointly capturing semantic and geometric information. This deficiency is manifested either in poor performance on grounding or in an excessive reliance on external modules, ultimately hindering the seamless integration of grounding and spatial reasoning. To address this, we propose a simple yet effective dual-path pooling mechanism that tightly aligns geometric features with both semantic and positional cues, constructing a unified image patch-based 3D representation that encapsulates all essential information without increasing the number of input tokens. Leveraging this holistic representation, GS-Reasoner is the first 3D LLM that achieves autoregressive grounding entirely without external modules while delivering performance comparable to state-of-the-art models, establishing a unified and self-contained framework for 3D spatial reasoning. To further bridge grounding and spatial reasoning, we introduce the Grounded Chain-of-Thought (GCoT) dataset. This dataset is meticulously curated to include both 3D bounding box annotations for objects referenced in reasoning questions and step-by-step reasoning paths that integrate grounding as a core component of the problem-solving process. Extensive experiments demonstrate that GS-Reasoner achieves impressive results on 3D visual grounding, which in turn significantly enhances its spatial reasoning capabilities, leading to state-of-the-art performance.

Vision-and-Language Navigation (VLN) in large-scale urban environments requires embodied agents to ground linguistic instructions in complex scenes and recall relevant experiences over extended time horizons. Prior modular pipelines offer interpretability but lack unified memory, while end-to-end (M)LLM agents excel at fusing vision and language yet remain constrained by fixed context windows and implicit spatial reasoning. We introduce Mem4Nav, a hierarchical spatial-cognition long-short memory system that can augment any VLN backbone. Mem4Nav fuses a sparse octree for fine-grained voxel indexing with a semantic topology graph for high-level landmark connectivity, storing both in trainable memory tokens embedded via a reversible Transformer. Long-term memory (LTM) compresses and retains historical observations at both octree and graph nodes, while short-term memory (STM) caches recent multimodal entries in relative coordinates for real-time obstacle avoidance and local planning. At each step, STM retrieval sharply prunes dynamic context, and, when deeper history is needed, LTM tokens are decoded losslessly to reconstruct past embeddings. Evaluated on Touchdown and Map2Seq across three backbones (modular, state-of-the-art VLN with prompt-based LLM, and state-of-the-art VLN with strided-attention MLLM), Mem4Nav yields 7-13 pp gains in Task Completion, sufficient SPD reduction, and >10 pp nDTW improvement. Ablations confirm the indispensability of both the hierarchical map and dual memory modules. Our codes are open-sourced via https://github.com/tsinghua-fib-lab/Mem4Nav.

Interactive world models continually generate video by responding to a user's actions, enabling open-ended generation capabilities. However, existing models typically lack a 3D representation of the environment, meaning 3D consistency must be implicitly learned from data, and spatial memory is restricted to limited temporal context windows. This results in an unrealistic user experience and presents significant obstacles to down-stream tasks such as training agents. To address this, we present PERSIST, a new paradigm of world model which simulates the evolution of a latent 3D scene: environment, camera, and renderer. This allows us to synthesize new frames with persistent spatial memory and consistent geometry. Both quantitative metrics and a qualitative user study show substantial improvements in spatial memory, 3D consistency, and long-horizon stability over existing methods, enabling coherent, evolving 3D worlds. We further demonstrate novel capabilities, including synthesising diverse 3D environments from a single image, as well as enabling fine-grained, geometry-aware control over generated experiences by supporting environment editing and specification directly in 3D space. Project page: https://francelico.github.io/persist.github.io

This paper provides a novel approach to reconciling complex low-level memory model features, such as pointer--integer casts, with desired refinements that are needed to justify the correctness of program transformations. The idea is to use a "two-phased" memory model, one with and unbounded memory and corresponding unbounded integer type, and one with a finite memory; the connection between the two levels is made explicit by our notion of refinement that handles out-of-memory behaviors. This approach allows for more optimizations to be performed and establishes a clear boundary between the idealized semantics of a program and the implementation of that program on finite hardware. To demonstrate the utility of this idea in practice, we instantiate the two-phase memory model in the context of Zakowski et al.'s VIR semantics, yielding infinite and finite memory models of LLVM IR, including low-level features like undef and bitcast. Both the infinite and finite models, which act as specifications, can provably be refined to executable reference interpreters. The semantics justify optimizations, such as dead-alloca-elimination, that were previously impossible or difficult to prove correct.

Modern Recurrent Neural Networks have become a competitive architecture for 3D reconstruction due to their linear-time complexity. However, their performance degrades significantly when applied beyond the training context length, revealing limited length generalization. In this work, we revisit the 3D reconstruction foundation models from a Test-Time Training perspective, framing their designs as an online learning problem. Building on this perspective, we leverage the alignment confidence between the memory state and incoming observations to derive a closed-form learning rate for memory updates, to balance between retaining historical information and adapting to new observations. This training-free intervention, termed TTT3R, substantially improves length generalization, achieving a 2times improvement in global pose estimation over baselines, while operating at 20 FPS with just 6 GB of GPU memory to process thousands of images. Code available in https://rover-xingyu.github.io/TTT3R

3D Gaussian Splatting (3DGS) achieves fast and high-quality renderings by using numerous small Gaussians, which leads to significant memory consumption. This reliance on a large number of Gaussians restricts the application of 3DGS-based models on low-cost devices due to memory limitations. However, simply reducing the number of Gaussians to accommodate devices with less memory capacity leads to inferior quality compared to the quality that can be achieved on high-end hardware. To address this lack of scalability, we propose integrating a Flexible Level of Detail (FLoD) to 3DGS, to allow a scene to be rendered at varying levels of detail according to hardware capabilities. While existing 3DGSs with LoD focus on detailed reconstruction, our method provides reconstructions using a small number of Gaussians for reduced memory requirements, and a larger number of Gaussians for greater detail. Experiments demonstrate our various rendering options with tradeoffs between rendering quality and memory usage, thereby allowing real-time rendering across different memory constraints. Furthermore, we show that our method generalizes to different 3DGS frameworks, indicating its potential for integration into future state-of-the-art developments. Project page: https://3dgs-flod.github.io/flod.github.io/

Contemporary 3D research, particularly in reconstruction and generation, heavily relies on 2D images for inputs or supervision. However, current designs for these 2D-3D mapping are memory-intensive, posing a significant bottleneck for existing methods and hindering new applications. In response, we propose a pair of highly scalable components for 3D neural fields: Lightplane Render and Splatter, which significantly reduce memory usage in 2D-3D mapping. These innovations enable the processing of vastly more and higher resolution images with small memory and computational costs. We demonstrate their utility in various applications, from benefiting single-scene optimization with image-level losses to realizing a versatile pipeline for dramatically scaling 3D reconstruction and generation. Code: https://github.com/facebookresearch/lightplane.

World models serve as essential building blocks toward Artificial General Intelligence (AGI), enabling intelligent agents to predict future states and plan actions by simulating complex physical interactions. However, existing interactive models primarily predict visual observations, thereby neglecting crucial hidden states like geometric structures and spatial coherence. This leads to rapid error accumulation and temporal inconsistency. To address these limitations, we introduce DeepVerse, a novel 4D interactive world model explicitly incorporating geometric predictions from previous timesteps into current predictions conditioned on actions. Experiments demonstrate that by incorporating explicit geometric constraints, DeepVerse captures richer spatio-temporal relationships and underlying physical dynamics. This capability significantly reduces drift and enhances temporal consistency, enabling the model to reliably generate extended future sequences and achieve substantial improvements in prediction accuracy, visual realism, and scene rationality. Furthermore, our method provides an effective solution for geometry-aware memory retrieval, effectively preserving long-term spatial consistency. We validate the effectiveness of DeepVerse across diverse scenarios, establishing its capacity for high-fidelity, long-horizon predictions grounded in geometry-aware dynamics.

The field of efficient Large Language Model (LLM) inference is rapidly evolving, presenting a unique blend of opportunities and challenges. Although the field has expanded and is vibrant, there hasn't been a concise framework that analyzes the various methods of LLM Inference to provide a clear understanding of this domain. Our survey stands out from traditional literature reviews by not only summarizing the current state of research but also by introducing a framework based on roofline model for systematic analysis of LLM inference techniques. This framework identifies the bottlenecks when deploying LLMs on hardware devices and provides a clear understanding of practical problems, such as why LLMs are memory-bound, how much memory and computation they need, and how to choose the right hardware. We systematically collate the latest advancements in efficient LLM inference, covering crucial areas such as model compression (e.g., Knowledge Distillation and Quantization), algorithm improvements (e.g., Early Exit and Mixture-of-Expert), and both hardware and system-level enhancements. Our survey stands out by analyzing these methods with roofline model, helping us understand their impact on memory access and computation. This distinctive approach not only showcases the current research landscape but also delivers valuable insights for practical implementation, positioning our work as an indispensable resource for researchers new to the field as well as for those seeking to deepen their understanding of efficient LLM deployment. The analyze tool, LLM-Viewer, is open-sourced.

Recent advancements in 3D Large Language Models (3DLLMs) have highlighted their potential in building general-purpose agents in the 3D real world, yet challenges remain due to the lack of high-quality robust instruction-following data, leading to limited discriminative power and generalization of 3DLLMs. In this paper, we introduce Robin3D, a powerful 3DLLM trained on large-scale instruction-following data generated by our novel data engine, Robust Instruction Generation (RIG) engine. RIG generates two key instruction data: 1) the Adversarial Instruction-following data, which features mixed negative and positive samples to enhance the model's discriminative understanding. 2) the Diverse Instruction-following data, which contains various instruction styles to enhance model's generalization. As a result, we construct 1 million instruction-following data, consisting of 344K Adversarial samples, 508K Diverse samples, and 165K benchmark training set samples. To better handle these complex instructions, Robin3D first incorporates Relation-Augmented Projector to enhance spatial understanding, and then strengthens the object referring and grounding ability through ID-Feature Bonding. Robin3D consistently outperforms previous methods across five widely-used 3D multimodal learning benchmarks, without the need for task-specific fine-tuning. Notably, we achieve a 7.8\% improvement in the grounding task (Multi3DRefer) and a 6.9\% improvement in the captioning task (Scan2Cap).

Current 3D spatial reasoning methods face a fundamental trade-off: neuro-symbolic 3D (NS3D) concept learners achieve interpretable reasoning through compositional programs but are constrained to closed-set concept vocabularies and simple programs; end-to-end 3D multi-modal LLMs (3D MLLMs) could handle complex natural language and open-vocabulary concepts but suffer from black-box reasoning without explicit spatial verification. We introduce APEIRIA, a neuro-symbolic 3D MLLM to bridge two paradigms by distilling symbolic reasoning patterns into MLLMs with natural language chain-of-thought. Our three-stage curriculum progressively builds reasoning capabilities: a) 3D perception alignment grounds object visual-geometric features to the LLM, b) CoT-SFT teaches query decomposition and stepwise verification from symbolic program traces, and c) CoT-RL extends reasoning patterns to open-set concepts and deeply nested instructions. By transferring reasoning patterns rather than concept-specific knowledge, APEIRIA preserves key NS3D virtues: transparent reasoning and modular interchangeability of planning and perception components. Evaluations on grounding, question answering, and captioning show that APEIRIA surpasses prior NS3D methods and matches state-of-the-art 3D MLLMs on 3D spatial reasoning datasets, unifying symbolic methods' systematic reasoning with MLLMs' flexibility. Code is available at https://github.com/oceanflowlab/APEIRIA.

Memory is a critical component of robotic intelligence, as robots must rely on past observations and actions to accomplish long-horizon tasks in partially observable environments. However, existing robotic memory benchmarks still lack multimodal annotations for memory formation, provide limited task coverage and structural complexity, and remain restricted to simulation without real-world evaluation. We address this gap with RoboMemArena, a large-scale benchmark of 26 tasks, with average trajectory lengths exceeding 1,000 steps per task and 68.9% of subtasks being memory-dependent. The generation pipeline leverages a vision-language model (VLM) to design and compose subtasks, generates full trajectories through atomic functions, and provides memory-related annotations, including subtask instructions and native keyframe annotations, while paired real-world memory tasks support physical evaluation. We further design PrediMem, a dual-system VLA in which a high-level VLM planner manages a memory bank with recent and keyframe buffers and uses a predictive coding head to improve sensitivity to task dynamics. Extensive experiments on RoboMemArena show that PrediMem outperforms all baselines and provides insights into memory management, model architecture, and scaling laws for complex memory systems.

The growing demand for controllable outputs in text-to-image generation has driven significant advancements in multi-instance generation (MIG), enabling users to define both instance layouts and attributes. Currently, the state-of-the-art methods in MIG are primarily adapter-based. However, these methods necessitate retraining a new adapter each time a more advanced model is released, resulting in significant resource consumption. A methodology named Depth-Driven Decoupled Instance Synthesis (3DIS) has been introduced, which decouples MIG into two distinct phases: 1) depth-based scene construction and 2) detail rendering with widely pre-trained depth control models. The 3DIS method requires adapter training solely during the scene construction phase, while enabling various models to perform training-free detail rendering. Initially, 3DIS focused on rendering techniques utilizing U-Net architectures such as SD1.5, SD2, and SDXL, without exploring the potential of recent DiT-based models like FLUX. In this paper, we present 3DIS-FLUX, an extension of the 3DIS framework that integrates the FLUX model for enhanced rendering capabilities. Specifically, we employ the FLUX.1-Depth-dev model for depth map controlled image generation and introduce a detail renderer that manipulates the Attention Mask in FLUX's Joint Attention mechanism based on layout information. This approach allows for the precise rendering of fine-grained attributes of each instance. Our experimental results indicate that 3DIS-FLUX, leveraging the FLUX model, outperforms the original 3DIS method, which utilized SD2 and SDXL, and surpasses current state-of-the-art adapter-based methods in terms of both performance and image quality. Project Page: https://limuloo.github.io/3DIS/.

Agentic LLM frameworks that rely on prompted orchestration, where the model itself determines workflow transitions, often suffer from hallucinated routing, infinite loops, and non-reproducible execution. We introduce GraphBit, an engine-orchestrated framework that defines workflows explicitly and deterministically as a directed acyclic graph (DAG). Unlike prompted orchestration, agents in GraphBit operate as typed functions, while a Rust-based engine governs routing, state transitions, and tool invocation, ensuring reproducibility and auditability. The engine supports parallel branch execution, conditional control flow over structured state predicates, and configurable error recovery. A three-tier memory architecture consisting of ephemeral scratch space, structured state, and external connectors isolates context across stages, preventing cascading context bloat that degrades reasoning in long-running pipelines. Across GAIA benchmark tasks spanning zero-tool, document-augmented, and web-enabled workflows, GraphBit outperforms six existing frameworks, achieving the highest accuracy (67.6 percent), zero framework-induced hallucinations, the lowest latency (11.9 ms overhead), and the highest throughput. Ablation studies demonstrate that each memory tier contributes measurably to performance, with deterministic execution providing the greatest gains on tool-intensive tasks representative of real-world deployments.

While deep neural net inference was considered a task for servers only, latest advances in technology allow the task of inference to be moved to mobile and embedded devices, desired for various reasons ranging from latency to privacy. These devices are not only limited by their compute power and battery, but also by their inferior physical memory and cache, and thus, an efficient memory manager becomes a crucial component for deep neural net inference at the edge. We explore various strategies to smartly share memory buffers among intermediate tensors in deep neural nets. Employing these can result in up to 11% smaller memory footprint than the state of the art.

Long contexts challenge transformers: attention scores dilute across thousands of tokens, critical information is often lost in the middle, and models struggle to adapt to novel patterns at inference time. Recent work on test-time adaptation addresses this by maintaining a form of working memory -- transient parameters updated on the current context -- but existing approaches rely on uniform write policies that waste computation on low-utility regions and suffer from high gradient variance across semantically heterogeneous contexts. In this work, we reframe test-time adaptation as a budget-constrained memory consolidation problem, focusing on which parts of the context should be consolidated into working memory under limited computation. We propose Gdwm (Gated Differentiable Working Memory), a framework that introduces a write controller to gate the consolidation process. The controller estimates Contextual Utility, an information-theoretic measure of long-range contextual dependence, and allocates gradient steps accordingly while maintaining global coverage. Experiments on ZeroSCROLLS and LongBench v2 demonstrate that Gdwm achieves comparable or superior performance with 4times fewer gradient steps than uniform baselines, establishing a new efficiency-performance Pareto frontier for test-time adaptation.

Large Multimodal Models (LMMs) have become a pivotal research focus in deep learning, demonstrating remarkable capabilities in 3D scene understanding. However, current 3D LMMs employing thousands of spatial tokens for multimodal reasoning suffer from critical inefficiencies: excessive computational overhead and redundant information flows. Unlike 2D VLMs processing single images, 3D LMMs exhibit inherent architectural redundancy due to the heterogeneous mechanisms between spatial tokens and visual tokens. To address this challenge, we propose AdaToken-3D, an adaptive spatial token optimization framework that dynamically prunes redundant tokens through spatial contribution analysis. Our method automatically tailors pruning strategies to different 3D LMM architectures by quantifying token-level information flows via attention pattern mining. Extensive experiments on LLaVA-3D (a 7B parameter 3D-LMM) demonstrate that AdaToken-3D achieves 21\% faster inference speed and 63\% FLOPs reduction while maintaining original task accuracy. Beyond efficiency gains, this work systematically investigates redundancy patterns in multimodal spatial information flows through quantitative token interaction analysis. Our findings reveal that over 60\% of spatial tokens contribute minimally (<5\%) to the final predictions, establishing theoretical foundations for efficient 3D multimodal learning.

Consistent video generation under editing operations requires persistence: when edits modify scene appearance or layout, subsequent generations should remain coherent across time and viewpoints. However, existing memory designs struggle to maintain long-term consistency after such modifications, as stored contexts may become outdated or invalid. To address this, we propose PermaVid, a novel framework built upon a multi-modal context memory that disentangles spatial context into semantic appearance and geometric structure, together with an edit-aware memory update and retrieval strategy that keeps memory evolution aligned with subsequent observations. Specifically, we develop two complementary memory banks: an RGB context memory that captures appearance-aware observations while implicitly encoding geometry, and a depth context memory that preserves geometry-only structure disentangled from semantics. Building on this design, we introduce a memory-guided video generation model that performs multi-modal feature fusion under reference conditions drawn from mixed-modality memory contexts. Experiments demonstrate that our method maintains strong long-term semantic and structural consistency after edits, significantly outperforming state-of-the-art methods.

While Large Language Models (LLMs) excel at generalized reasoning, standard retrieval-augmented approaches fail to address the disconnected nature of long-term agentic memory. To bridge this gap, we introduce Synapse (Synergistic Associative Processing Semantic Encoding), a unified memory architecture that transcends static vector similarity. Drawing from cognitive science, Synapse models memory as a dynamic graph where relevance emerges from spreading activation rather than pre-computed links. By integrating lateral inhibition and temporal decay, the system dynamically highlights relevant sub-graphs while filtering interference. We implement a Triple Hybrid Retrieval strategy that fuses geometric embeddings with activation-based graph traversal. Comprehensive evaluations on the LoCoMo benchmark show that Synapse significantly outperforms state-of-the-art methods in complex temporal and multi-hop reasoning tasks, offering a robust solution to the "Contextual Tunneling" problem. Our code and data will be made publicly available upon acceptance.

Modern AI systems rely on vector embeddings stored and searched using floating-point arithmetic. While effective for approximate similarity search, this design introduces fundamental non-determinism: identical models, inputs, and code can produce different memory states and retrieval results across hardware architectures (e.g., x86 vs. ARM). This prevents replayability and safe deployment, leading to silent data divergence that prevents post-hoc verification and compromises audit trails in regulated sectors. We present Valori, a deterministic AI memory substrate that replaces floating-point memory operations with fixed-point arithmetic (Q16.16) and models memory as a replayable state machine. Valori guarantees bit-identical memory states, snapshots, and search results across platforms. We demonstrate that non-determinism arises before indexing or retrieval and show how Valori enforces determinism at the memory boundary. Our results suggest that deterministic memory is a necessary primitive for trustworthy AI systems. The reference implementation is open-source and available at https://github.com/varshith-Git/Valori-Kernel (archived at https://zenodo.org/records/18022660).

Advancements in LLMs have recently unveiled challenges tied to computational efficiency and continual scalability due to their requirements of huge parameters, making the applications and evolution of these models on devices with limited computation resources and scenarios requiring various abilities increasingly cumbersome. Inspired by modularity within the human brain, there is a growing tendency to decompose LLMs into numerous functional modules, allowing for inference with part of modules and dynamic assembly of modules to tackle complex tasks, such as mixture-of-experts. To highlight the inherent efficiency and composability of the modular approach, we coin the term brick to represent each functional module, designating the modularized structure as configurable foundation models. In this paper, we offer a comprehensive overview and investigation of the construction, utilization, and limitation of configurable foundation models. We first formalize modules into emergent bricks - functional neuron partitions that emerge during the pre-training phase, and customized bricks - bricks constructed via additional post-training to improve the capabilities and knowledge of LLMs. Based on diverse functional bricks, we further present four brick-oriented operations: retrieval and routing, merging, updating, and growing. These operations allow for dynamic configuration of LLMs based on instructions to handle complex tasks. To verify our perspective, we conduct an empirical analysis on widely-used LLMs. We find that the FFN layers follow modular patterns with functional specialization of neurons and functional neuron partitions. Finally, we highlight several open issues and directions for future research. Overall, this paper aims to offer a fresh modular perspective on existing LLM research and inspire the future creation of more efficient and scalable foundational models.

Maintaining spatial world consistency over long horizons remains a central challenge for camera-controllable video generation. Existing memory-based approaches often condition generation on globally reconstructed 3D scenes by rendering anchor videos from the reconstructed geometry in the history. However, reconstructing a global 3D scene from multiple views inevitably introduces cross-view misalignment, as pose and depth estimation errors cause the same surfaces to be reconstructed at slightly different 3D locations across views. When fused, these inconsistencies accumulate into noisy geometry that contaminates the conditioning signals and degrades generation quality. We introduce AnchorWeave, a memory-augmented video generation framework that replaces a single misaligned global memory with multiple clean local geometric memories and learns to reconcile their cross-view inconsistencies. To this end, AnchorWeave performs coverage-driven local memory retrieval aligned with the target trajectory and integrates the selected local memories through a multi-anchor weaving controller during generation. Extensive experiments demonstrate that AnchorWeave significantly improves long-term scene consistency while maintaining strong visual quality, with ablation and analysis studies further validating the effectiveness of local geometric conditioning, multi-anchor control, and coverage-driven retrieval.

Constructing memory from users' long-term conversations overcomes LLMs' contextual limitations and enables personalized interactions. Recent studies focus on hierarchical memory to model users' multi-granular behavioral patterns via clustering and aggregating historical conversations. However, conversational noise and memory hallucinations can be amplified during clustering, causing locally aggregated memories to misalign with the user's global persona. To mitigate this issue, we propose Bi-Mem, an agentic framework ensuring hierarchical memory fidelity through bidirectional construction. Specifically, we deploy an inductive agent to form the hierarchical memory: it extracts factual information from raw conversations to form fact-level memory, aggregates them into thematic scenes (i.e., local scene-level memory) using graph clustering, and infers users' profiles as global persona-level memory. Simultaneously, a reflective agent is designed to calibrate local scene-level memories using global constraints derived from the persona-level memory, thereby enforcing global-local alignment. For coherent memory recall, we propose an associative retrieval mechanism: beyond initial hierarchical search, a spreading activation process allows facts to evoke contextual scenes, while scene-level matches retrieve salient supporting factual information. Empirical evaluations demonstrate that Bi-Mem achieves significant improvements in question answering performance on long-term personalized conversational tasks.

Dynamic 3D scene representation and novel view synthesis are crucial for enabling immersive experiences required by AR/VR and metaverse applications. It is a challenging task due to the complexity of unconstrained real-world scenes and their temporal dynamics. In this paper, we reformulate the reconstruction of a time-varying 3D scene as approximating its underlying spatiotemporal 4D volume by optimizing a collection of native 4D primitives, i.e., 4D Gaussians, with explicit geometry and appearance modeling. Equipped with a tailored rendering pipeline, our representation can be end-to-end optimized using only photometric supervision while free viewpoint viewing at interactive frame rate, making it suitable for representing real world scene with complex dynamic. This approach has been the first solution to achieve real-time rendering of high-resolution, photorealistic novel views for complex dynamic scenes. To facilitate real-world applications, we derive several compact variants that effectively reduce the memory footprint to address its storage bottleneck. Extensive experiments validate the superiority of 4DGS in terms of visual quality and efficiency across a range of dynamic scene-related tasks (e.g., novel view synthesis, 4D generation, scene understanding) and scenarios (e.g., single object, indoor scenes, driving environments, synthetic and real data).

Video world models aim to simulate controllable visual environments, but long-horizon rollouts depend on what the model remembers after observations leave its native context window. Explicit memories retain frames or online 3D reconstructions, which can suffer from heuristic retrieval errors, redundant appearance storage, or reconstruction artifacts. Implicit memories compress history into a compact state, but existing designs are not explicitly constrained to encode cross-view scene geometry. We propose GIM-World, a geometry-aware implicit memory framework for video world models. A lightweight transformer encoder compresses variable-length history into fixed-size memory tokens, a camera-queryable geometry head distills 3D scene structure from a frozen foundation model into the memory during training, and an information-guided pruning rule keeps encoding cost bounded as history grows. The geometry teacher is discarded at inference, leaving a lightweight memory module. Experiments on MIND show that GIM-World better preserves long-horizon geometric and visual consistency than both explicit- and implicit-memory baselines.

The rapid advancement of Large Multimodal Models (LMMs) for 2D images and videos has motivated extending these models to understand 3D scenes, aiming for human-like visual-spatial intelligence. Nevertheless, achieving deep spatial understanding comparable to human capabilities poses significant challenges in model encoding and data acquisition. Existing methods frequently depend on external depth sensors for geometry capture or utilize off-the-shelf algorithms for pre-constructing 3D maps, thereby limiting their scalability, especially with prevalent monocular video inputs and for time-sensitive applications. In this work, we introduce VLM-3R, a unified framework for Vision-Language Models (VLMs) that incorporates 3D Reconstructive instruction tuning. VLM-3R processes monocular video frames by employing a geometry encoder to derive implicit 3D tokens that represent spatial understanding. Leveraging our Spatial-Visual-View Fusion and over 200K curated 3D reconstructive instruction tuning question-answer (QA) pairs, VLM-3R effectively aligns real-world spatial context with language instructions. This enables monocular 3D spatial assistance and embodied reasoning. To facilitate the evaluation of temporal reasoning, we introduce the Vision-Spatial-Temporal Intelligence benchmark, featuring over 138.6K QA pairs across five distinct tasks focused on evolving spatial relationships. Extensive experiments demonstrate that our model, VLM-3R, not only facilitates robust visual-spatial reasoning but also enables the understanding of temporal 3D context changes, excelling in both accuracy and scalability.

Memory is critical for long-horizon and history-dependent robotic manipulation. Such tasks often involve counting repeated actions or manipulating objects that become temporarily occluded. Recent vision-language-action (VLA) models have begun to incorporate memory mechanisms; however, their evaluations remain confined to narrow, non-standardized settings. This limits their systematic understanding, comparison, and progress measurement. To address these challenges, we introduce RoboMME: a large-scale standardized benchmark for evaluating and advancing VLA models in long-horizon, history-dependent scenarios. Our benchmark comprises 16 manipulation tasks constructed under a carefully designed taxonomy that evaluates temporal, spatial, object, and procedural memory. We further develop a suite of 14 memory-augmented VLA variants built on the π0.5 backbone to systematically explore different memory representations across multiple integration strategies. Experimental results show that the effectiveness of memory representations is highly task-dependent, with each design offering distinct advantages and limitations across different tasks. Videos and code can be found at our website https://robomme.github.io.

The grand vision of enabling persistent, large-scale 3D visual geometry understanding is shackled by the irreconcilable demands of scalability and long-term stability. While offline models like VGGT achieve inspiring geometry capability, their batch-based nature renders them irrelevant for live systems. Streaming architectures, though the intended solution for live operation, have proven inadequate. Existing methods either fail to support truly infinite-horizon inputs or suffer from catastrophic drift over long sequences. We shatter this long-standing dilemma with InfiniteVGGT, a causal visual geometry transformer that operationalizes the concept of a rolling memory through a bounded yet adaptive and perpetually expressive KV cache. Capitalizing on this, we devise a training-free, attention-agnostic pruning strategy that intelligently discards obsolete information, effectively ``rolling'' the memory forward with each new frame. Fully compatible with FlashAttention, InfiniteVGGT finally alleviates the compromise, enabling infinite-horizon streaming while outperforming existing streaming methods in long-term stability. The ultimate test for such a system is its performance over a truly infinite horizon, a capability that has been impossible to rigorously validate due to the lack of extremely long-term, continuous benchmarks. To address this critical gap, we introduce the Long3D benchmark, which, for the first time, enables a rigorous evaluation of continuous 3D geometry estimation on sequences about 10,000 frames. This provides the definitive evaluation platform for future research in long-term 3D geometry understanding. Code is available at: https://github.com/AutoLab-SAI-SJTU/InfiniteVGGT

With the rapid advancement of artificial intelligence technologies such as ChatGPT, AI agents, and video generation, contemporary mobile systems have begun integrating these AI capabilities on local devices to enhance privacy and reduce response latency. To meet the computational demands of AI tasks, current mobile SoCs are equipped with diverse AI accelerators, including GPUs and Neural Processing Units (NPUs). However, there has not been a comprehensive characterization of these heterogeneous processors, and existing designs typically only leverage a single AI accelerator for LLM inference, leading to suboptimal use of computational resources and memory bandwidth. In this paper, we first summarize key performance characteristics of heterogeneous processors, SoC memory bandwidth, etc. Drawing on these observations, we propose different heterogeneous parallel mechanisms to fully exploit both GPU and NPU computational power and memory bandwidth. We further design a fast synchronization mechanism between heterogeneous processors that leverages the unified memory architecture. By employing these techniques, we present HeteroInfer, the fastest LLM inference engine in mobile devices which supports GPU-NPU heterogeneous execution. Evaluation shows that HeteroInfer delivers a 1.34x to 6.02x end-to-end speedup over state-of-the-art GPU-only and NPU-only LLM engines, while maintaining negligible interference with other applications.

Attention for transformers is a critical workload that has recently received significant "attention" as a target for custom acceleration. Yet, while prior work succeeds in reducing attention's memory-bandwidth requirements, it creates load imbalance between attention operators (resulting in severe compute under-utilization) and requires on-chip memory that scales with sequence length (which is expected to grow over time). This paper ameliorates these issues, enabling attention with nearly 100% compute utilization, no off-chip memory traffic bottlenecks, and on-chip buffer size requirements that are independent of sequence length. The main conceptual contribution is to use a recently proposed abstraction -- the cascade of Einsums -- to describe, formalize and taxonomize the space of attention algorithms that appear in the literature. In particular, we show how Einsum cascades can be used to infer non-trivial lower bounds on the number of passes a kernel must take through its input data, which has implications for either required on-chip buffer capacity or memory traffic. We show how this notion can be used to meaningfully divide the space of attention algorithms into several categories and use these categories to inform our design process. Based on the above characterization, we propose FuseMax -- a novel mapping of attention onto a spatial array-style architecture. On attention, in an iso-area comparison, FuseMax achieves an average 6.7times speedup over the prior state-of-the-art FLAT while using 79% of the energy. Similarly, on the full end-to-end transformer inference, FuseMax achieves an average 5.3times speedup over FLAT using 83% of the energy.

Visual Geometry Grounded Transformers (VGGT) have set new benchmarks in high-fidelity 3D scene reconstruction. However, as the sequence length increases, these models suffer from catastrophic geometric forgetting and accumulation drift, primarily due to the quadratic complexity of global attention which necessitates truncated temporal windows. To overcome the resulting geometric drift, we present Mamba-VGGT, an enhanced VGGT framework capable of persistent long-range reasoning. Our key contribution is a Sliding Window Mamba (SWM) memory module that maintains an explicit external memory token across temporal windows. This module leverages selective state-space modeling to distill and propagate global geometric priors, effectively bypassing the memory constraints of traditional transformers. To integrate these long-term temporal cues without disrupting the highly optimized spatial features of the pre-trained VGGT, we propose a Zero-Init Spatial Memory Injector. Utilizing zero-convolutional layers, this injector adaptively fuses persistent memory into the patch token stream, ensuring structural stability and seamless feature alignment. Extensive experiments demonstrate that our approach significantly outperforms existing VGGT-based methods in maintaining spatial consistency and reducing trajectory accumulation errors. Our work provides a scalable, linear-complexity solution for geometry-grounded world modeling in extensive 3D environments.

The demand for inference on extremely large scale LLMs has seen enormous growth in the recent months. It made evident the colossal shortage of dedicated hardware capable of efficient and fast processing of the involved compute and memory movement. The problem is aggravated by the exploding raise in the lengths of the sequences being processed, since those require efficient on-chip storage of the KV-cache of size proportional to the sequence length. To make the required compute feasible and fit the involved data into available memory, numerous quantization techniques have been proposed that allow accurate quantization for both weights and activations. One of the main recent breakthroughs in this direction was introduction of the family of Block Floating Point (BFP) formats characterized by a block of mantissas with a shared scale factor. These enable memory- power-, and compute- efficient hardware support of the tensor operations and provide extremely good quantization accuracy. The main issues preventing widespread application of block formats is caused by the presence of outliers in weights and activations since those affect the accuracy of the other values in the same block. In this paper, we focus on the most critical problem of limited KV-cache storage. We propose a novel approach enabling usage of low precision BFP formats without compromising the resulting model accuracy. We exploit the common channel-wise patterns exhibited by the outliers to rearrange them in such a way, that their quantization quality is significantly improved. The methodology yields 2x savings in the memory footprint without significant degradation of the model's accuracy. Importantly, the rearrangement of channels happens at the compile time and thus has no impact on the inference latency.

Memory-augmented Large Language Models (LLMs) are essential for developing capable, long-term AI agents. Recently, applying Reinforcement Learning (RL) to optimize memory operations, such as extraction, updating, and retrieval, has emerged as a highly promising research direction. However, existing implementations remain highly fragmented and task-specific, lacking a unified infrastructure to streamline the integration, training, and evaluation of these complex pipelines. To address this gap, we present MemFactory, the first unified, highly modular training and inference framework specifically designed for memory-augmented agents. Inspired by the success of unified fine-tuning frameworks like LLaMA-Factory, MemFactory abstracts the memory lifecycle into atomic, plug-and-play components, enabling researchers to seamlessly construct custom memory agents via a "Lego-like" architecture. Furthermore, the framework natively integrates Group Relative Policy Optimization (GRPO) to fine-tune internal memory management policies driven by multi-dimensional environmental rewards. MemFactory provides out-of-the-box support for recent cutting-edge paradigms, including Memory-R1, RMM, and MemAgent. We empirically validate MemFactory on the open-source MemAgent architecture using its publicly available training and evaluation data. Across the evaluation sets, MemFactory improves performance over the corresponding base models on average, with relative gains of up to 14.8%. By providing a standardized, extensible, and easy-to-use infrastructure, MemFactory significantly lowers the barrier to entry, paving the way for future innovations in memory-driven AI agents.

Memory-augmented large language models extend reasoning beyond a fixed context window by maintaining long-term memory across interactions. However, existing memory systems often collapse stable user facts, episodic events, and behavioral rules into a shared space, allowing functionally distinct memories to be retrieved and used as interchangeable evidence. We identify this failure mode as heterogeneous memory contamination, where context-specific events become overgeneralized claims, or semantically relevant but functionally incompatible memories mislead generation. To this end, we introduce MemGuard, a type-aware memory framework that preserves functional memory boundaries during memory construction and retrieval. It assigns each memory an explicit functional role at write time, maintains relations across type-isolated memories, and selectively composes evidence only from necessary memory types, reducing contamination from irrelevant or functionally incompatible evidence. Across hallucination and long-horizon conversation benchmarks, MemGuard improves memory reliability by up to 28.27% while retrieving up to 5.8x fewer memory tokens than prior methods. These results suggest that reliable long-term reasoning depends on principled organization and selective use of heterogeneous memory.

Despite encouraging progress in 3D scene understanding, it remains challenging to develop an effective Large Multi-modal Model (LMM) that is capable of understanding and reasoning in complex 3D environments. Most previous methods typically encode 3D point and 2D image features separately, neglecting interactions between 2D semantics and 3D object properties, as well as the spatial relationships within the 3D environment. This limitation not only hinders comprehensive representations of 3D scene, but also compromises training and inference efficiency. To address these challenges, we propose a unified Instance-aware 3D Large Multi-modal Model (Inst3D-LMM) to deal with multiple 3D scene understanding tasks simultaneously. To obtain the fine-grained instance-level visual tokens, we first introduce a novel Multi-view Cross-Modal Fusion (MCMF) module to inject the multi-view 2D semantics into their corresponding 3D geometric features. For scene-level relation-aware tokens, we further present a 3D Instance Spatial Relation (3D-ISR) module to capture the intricate pairwise spatial relationships among objects. Additionally, we perform end-to-end multi-task instruction tuning simultaneously without the subsequent task-specific fine-tuning. Extensive experiments demonstrate that our approach outperforms the state-of-the-art methods across 3D scene understanding, reasoning and grounding tasks. Source code is available at https://github.com/hanxunyu/Inst3D-LMM

Memory is crucial for enabling agents to tackle complex tasks with temporal and spatial dependencies. While many reinforcement learning (RL) algorithms incorporate memory, the field lacks a universal benchmark to assess an agent's memory capabilities across diverse scenarios. This gap is particularly evident in tabletop robotic manipulation, where memory is essential for solving tasks with partial observability and ensuring robust performance, yet no standardized benchmarks exist. To address this, we introduce MIKASA (Memory-Intensive Skills Assessment Suite for Agents), a comprehensive benchmark for memory RL, with three key contributions: (1) we propose a comprehensive classification framework for memory-intensive RL tasks, (2) we collect MIKASA-Base - a unified benchmark that enables systematic evaluation of memory-enhanced agents across diverse scenarios, and (3) we develop MIKASA-Robo - a novel benchmark of 32 carefully designed memory-intensive tasks that assess memory capabilities in tabletop robotic manipulation. Our contributions establish a unified framework for advancing memory RL research, driving the development of more reliable systems for real-world applications. The code is available at https://sites.google.com/view/memorybenchrobots/.

Standard mixed-precision training of neural networks requires many bytes of accelerator memory for each model parameter. These bytes reflect not just the parameter itself, but also its gradient and one or more optimizer state variables. With each of these values typically requiring 4 bytes, training even a 7 billion parameter model can be impractical for researchers with less than 100GB of accelerator memory. We introduce FlashOptim, a suite of optimizations that reduces per-parameter memory by over 50% while preserving model quality and API compatibility. Our approach introduces two key techniques. First, we improve master weight splitting by finding and exploiting a tight bound on its quantization error. Second, we design companding functions that greatly reduce the error in 8-bit optimizer state quantization. Together with 16-bit gradients, these techniques reduce AdamW memory from 16 bytes to 7 bytes per parameter, or 5 bytes with gradient release. They also cut model checkpoint sizes by more than half. Experiments with FlashOptim applied to SGD, AdamW, and Lion show no measurable quality degradation on any task from a collection of standard vision and language benchmarks, including Llama-3.1-8B finetuning.

Mixture-of-Experts (MoE) architectures power the majority of frontier large language models, but their inference is bottlenecked by irregular memory access patterns and expert routing overhead. Existing optimized MoE kernels (Megablocks, Tutel, FasterMoE) are implemented in CUDA and locked to NVIDIA hardware. We present TritonMoE, a fused MoE dispatch kernel written entirely in OpenAI Triton that performs the complete forward pass -- router scoring, token permutation, expert GEMMs, and weighted output combination -- using only portable Triton primitives. Our key optimization is a fused gate+up GEMM kernel that computes both SwiGLU projections from shared L2-cached input tiles with in-register SiLU activation, eliminating 35% of global memory traffic. On an NVIDIA A100, TritonMoE achieves 89-131% of the throughput of the CUDA-optimized Megablocks at inference batch sizes (<= 512 tokens) across Mixtral-8x7B, DeepSeek-V3, and Qwen2-MoE configurations. All 162 correctness tests pass on both NVIDIA A100 and AMD MI300X with zero code changes, validating cross-platform portability. We additionally characterize sensitivity to routing imbalance under Zipfian-skewed expert assignments and identify the regime -- 64+ experts under extreme skew -- where our fixed-tile scheduling underperforms Megablocks' block-sparse layout, motivating dynamic block-to-expert assignment as future work. Code is available at https://github.com/bassrehab/triton-kernels.

Feedforward geometric foundation models achieve strong short-window reconstruction, yet scaling them to minutes-long videos is bottlenecked by quadratic attention complexity or limited effective memory in recurrent designs. We present LoGeR (Long-context Geometric Reconstruction), a novel architecture that scales dense 3D reconstruction to extremely long sequences without post-optimization. LoGeR processes video streams in chunks, leveraging strong bidirectional priors for high-fidelity intra-chunk reasoning. To manage the critical challenge of coherence across chunk boundaries, we propose a learning-based hybrid memory module. This dual-component system combines a parametric Test-Time Training (TTT) memory to anchor the global coordinate frame and prevent scale drift, alongside a non-parametric Sliding Window Attention (SWA) mechanism to preserve uncompressed context for high-precision adjacent alignment. Remarkably, this memory architecture enables LoGeR to be trained on sequences of 128 frames, and generalize up to thousands of frames during inference. Evaluated across standard benchmarks and a newly repurposed VBR dataset with sequences of up to 19k frames, LoGeR substantially outperforms prior state-of-the-art feedforward methods--reducing ATE on KITTI by over 74%--and achieves robust, globally consistent reconstruction over unprecedented horizons.

Memory agents, which depart from predefined memory-processing pipelines by endogenously managing the processing, storage, and retrieval of memories, have garnered increasing attention for their autonomy and adaptability. However, existing training paradigms remain constrained: agents often traverse long-horizon sequences of memory operations before receiving sparse and delayed rewards, which hinders truly end-to-end optimization of memory management policies. To address this limitation, we introduce Mem-T, an autonomous memory agent that interfaces with a lightweight hierarchical memory database to perform dynamic updates and multi-turn retrieval over streaming inputs. To effectively train long-horizon memory management capabilities, we further propose MoT-GRPO, a tree-guided reinforcement learning framework that transforms sparse terminal feedback into dense, step-wise supervision via memory operation tree backpropagation and hindsight credit assignment, thereby enabling the joint optimization of memory construction and retrieval. Extensive experiments demonstrate that Mem-T is (1) high-performing, surpassing frameworks such as A-Mem and Mem0 by up to 14.92%, and (2) economical, operating on a favorable accuracy-efficiency Pareto frontier and reducing inference tokens per query by sim24.45% relative to GAM without sacrificing performance.

Driven by the appealing properties of neural fields for storing and communicating 3D data, the problem of directly processing them to address tasks such as classification and part segmentation has emerged and has been investigated in recent works. Early approaches employ neural fields parameterized by shared networks trained on the whole dataset, achieving good task performance but sacrificing reconstruction quality. To improve the latter, later methods focus on individual neural fields parameterized as large Multi-Layer Perceptrons (MLPs), which are, however, challenging to process due to the high dimensionality of the weight space, intrinsic weight space symmetries, and sensitivity to random initialization. Hence, results turn out significantly inferior to those achieved by processing explicit representations, e.g., point clouds or meshes. In the meantime, hybrid representations, in particular based on tri-planes, have emerged as a more effective and efficient alternative to realize neural fields, but their direct processing has not been investigated yet. In this paper, we show that the tri-plane discrete data structure encodes rich information, which can be effectively processed by standard deep-learning machinery. We define an extensive benchmark covering a diverse set of fields such as occupancy, signed/unsigned distance, and, for the first time, radiance fields. While processing a field with the same reconstruction quality, we achieve task performance far superior to frameworks that process large MLPs and, for the first time, almost on par with architectures handling explicit representations.

Diffusion Large Language Models (dLLMs) have emerged as a promising alternative to Autoregressive Models (ARMs), utilizing parallel decoding to overcome sequential bottlenecks. However, existing research focuses primarily on kernel-level optimizations, lacking a holistic serving framework that addresses the unique memory dynamics of diffusion processes in production. We identify a critical "memory footprint crisis" specific to dLLMs, driven by monolithic logit tensors and the severe resource oscillation between compute-bound "Refresh" phases and bandwidth-bound "Reuse" phases. To bridge this gap, we present dLLM-Serve, an efficient dLLM serving system that co-optimizes memory footprint, computational scheduling, and generation quality. dLLM-Serve introduces Logit-Aware Activation Budgeting to decompose transient tensor peaks, a Phase-Multiplexed Scheduler to interleave heterogeneous request phases, and Head-Centric Sparse Attention to decouple logical sparsity from physical storage. We evaluate dLLM-Serve on diverse workloads (LiveBench, Burst, OSC) and GPUs (RTX 4090, L40S). Relative to the state-of-the-art baseline, dLLM-Serve improves throughput by 1.61times-1.81times on the consumer-grade RTX 4090 and 1.60times-1.74times on the server-grade NVIDIA L40S, while reducing tail latency by nearly 4times under heavy contention. dLLM-Serve establishes the first blueprint for scalable dLLM inference, converting theoretical algorithmic sparsity into tangible wall-clock acceleration across heterogeneous hardware.

Autoregressive sequence modeling stands as the cornerstone of modern Generative AI, powering results across diverse modalities ranging from text generation to image generation. However, a fundamental limitation of this paradigm is the rigid structural coupling of model capacity to computational cost: expanding a model's parametric memory -- its repository of factual knowledge or visual patterns -- traditionally requires deepening or widening the network, which incurs a proportional rise in active FLOPs. In this work, we introduce MoVE (Mixture of Value Embeddings), a mechanism that breaks this coupling and establishes a new axis for scaling capacity. MoVE decouples memory from compute by introducing a global bank of learnable value embeddings shared across all attention layers. For every step in the sequence, the model employs a differentiable soft gating mechanism to dynamically mix retrieved concepts from this bank into the standard value projection. This architecture allows parametric memory to be scaled independently of network depth by simply increasing the number of embedding slots. We validate MoVE through strictly controlled experiments on two representative applications of autoregressive modeling: Text Generation and Image Generation. In both domains, MoVE yields consistent performance improvements over standard and layer-wise memory baselines, enabling the construction of "memory-dense" models that achieve lower perplexity and higher fidelity than their dense counterparts at comparable compute budgets.