Daily Papers

In the last three years, the largest dense deep learning models have grown over 1000x to reach hundreds of billions of parameters, while the GPU memory has only grown by 5x (16 GB to 80 GB). Therefore, the growth in model scale has been supported primarily though system innovations that allow large models to fit in the aggregate GPU memory of multiple GPUs. However, we are getting close to the GPU memory wall. It requires 800 NVIDIA V100 GPUs just to fit a trillion parameter model for training, and such clusters are simply out of reach for most data scientists. In addition, training models at that scale requires complex combinations of parallelism techniques that puts a big burden on the data scientists to refactor their model. In this paper we present ZeRO-Infinity, a novel heterogeneous system technology that leverages GPU, CPU, and NVMe memory to allow for unprecedented model scale on limited resources without requiring model code refactoring. At the same time it achieves excellent training throughput and scalability, unencumbered by the limited CPU or NVMe bandwidth. ZeRO-Infinity can fit models with tens and even hundreds of trillions of parameters for training on current generation GPU clusters. It can be used to fine-tune trillion parameter models on a single NVIDIA DGX-2 node, making large models more accessible. In terms of training throughput and scalability, it sustains over 25 petaflops on 512 NVIDIA V100 GPUs(40% of peak), while also demonstrating super linear scalability. An open source implementation of ZeRO-Infinity is available through DeepSpeed, a deep learning optimization library that makes distributed training easy, efficient, and effective.

Large-scale model training has been a playing ground for a limited few requiring complex model refactoring and access to prohibitively expensive GPU clusters. ZeRO-Offload changes the large model training landscape by making large model training accessible to nearly everyone. It can train models with over 13 billion parameters on a single GPU, a 10x increase in size compared to popular framework such as PyTorch, and it does so without requiring any model change from the data scientists or sacrificing computational efficiency. ZeRO-Offload enables large model training by offloading data and compute to CPU. To preserve compute efficiency, it is designed to minimize the data movement to/from GPU, and reduce CPU compute time while maximizing memory savings on GPU. As a result, ZeRO-Offload can achieve 40 TFlops/GPU on a single NVIDIA V100 GPU for 10B parameter model compared to 30TF using PyTorch alone for a 1.4B parameter model, the largest that can be trained without running out of memory. ZeRO-Offload is also designed to scale on multiple-GPUs when available, offering near linear speedup on up to 128 GPUs. Additionally, it can work together with model parallelism to train models with over 70 billion parameters on a single DGX-2 box, a 4.5x increase in model size compared to using model parallelism alone. By combining compute and memory efficiency with ease-of-use, ZeRO-Offload democratizes large-scale model training making it accessible to even data scientists with access to just a single GPU.

AlphaFold predicts protein structures from the amino acid sequence at or near experimental resolution, solving the 50-year-old protein folding challenge, leading to progress by transforming large-scale genomics data into protein structures. AlphaFold will also greatly change the scientific research model from low-throughput to high-throughput manner. The AlphaFold framework is a mixture of two types of workloads: MSA construction based on CPUs and model inference on GPUs. The first CPU stage dominates the overall runtime, taking hours for a single protein due to the large database sizes and I/O bottlenecks. However, GPUs in this CPU stage remain idle, resulting in low GPU utilization and restricting the capacity of large-scale structure predictions. Therefore, we proposed ParaFold, an open-source parallel version of AlphaFold for high throughput protein structure predictions. ParaFold separates the CPU and GPU parts to enable large-scale structure predictions. ParaFold also effectively reduces the CPU and GPU runtime with two optimizations without compromising the quality of prediction results: using multi-threaded parallelism on CPUs and using optimized JAX compilation on GPUs. We evaluated ParaFold with three datasets of different size and protein lengths. We evaluated the accuracy and efficiency of optimizations on CPUs and GPUs, and showed the large-scale prediction capability by running ParaFold inferences of 19,704 small proteins in five hours on one NVIDIA DGX-2. Using the JAX compile optimization, ParaFold attained a 13.8X average speedup over AlphaFold. ParaFold offers a rapid and effective approach for high-throughput structure predictions, leveraging the predictive power by running on supercomputers, with shorter time, and at a lower cost. The development of ParaFold will greatly speed up high-throughput studies and render the protein "structure-omics" feasible.

We present a systematic study of fine-tuning OpenAI's Whisper large-v3 for Swiss German ASR, using 1,367 hours of broadcast speech paired with Standard German subtitles as weak supervision. Through 16 iterative training runs on an NVIDIA DGX Spark (Grace Blackwell, 128 GB unified memory, up to 1 PFLOP FP4), we compare LoRA and full fine-tuning of the 1.55B-parameter model, investigate hallucination root causes, and quantify the effect of data quality, subtitle alignment, and training strategy. Our best model achieves 25.6% measured WER on the All Swiss German Dialects Test Set (ASGDTS) in an honest evaluation on strictly disjoint data. A harmonized error analysis separating genuine errors from valid stylistic variation (tense, word order, Swiss orthography) yields a content WER (cWER) of 13.8%, counting only actual recognition failures. Bias-corrected estimation reduces this to 8.5%, suggesting the true error rate is roughly one third of measured WER. We demonstrate that published state-of-the-art Swiss German ASR results (17.1-17.5% WER) are inflated by benchmark contamination: a vanilla Whisper model self-trained on the ASGDTS test set with zero Swiss German data achieves 13.88% WER, surpassing all published systems. Experiments with Phi-4-multimodal show an even stronger memorization effect (3.9% WER), revealing that the benchmark primarily measures convention matching rather than dialectal comprehension. We release two models, a LoRA adapter (25.32% WER, 13.9% cWER) and a full fine-tuned model (25.60% WER, 13.8% cWER), among the few publicly available, honestly evaluated Whisper models for Swiss German, under Apache 2.0 with full reproducibility, requiring no institutional data agreements.

NVIDIA's 2:4 Sparse Tensor Cores deliver 2x throughput but demand strict 50% pruning -- a ratio that collapses LLM reasoning accuracy (Qwen3: 54% to 15%). Milder (2N-2):2N patterns (e.g., 6:8, 25% pruning) preserve accuracy yet receive no hardware support, falling back to dense execution without any benefit from sparsity. We present SlideSparse, the first system to unlock Sparse Tensor Core acceleration for the (2N-2):2N model family on commodity GPUs. Our Sliding Window Decomposition reconstructs any (2N-2):2N weight block into N-1 overlapping 2:4-compliant windows without any accuracy loss; Activation Lifting fuses the corresponding activation rearrangement into per-token quantization at near-zero cost. Integrated into vLLM, SlideSparse is evaluated across various GPUs (A100, H100, B200, RTX 4090, RTX 5080, DGX-spark), precisions (FP4, INT8, FP8, BF16, FP16), and model families (Llama, Qwen, BitNet). On compute-bound workloads, the measured speedup ratio (1.33x) approaches the theoretical upper-bound N/(N-1)=4/3 at 6:8 weight sparsity in Qwen2.5-7B, establishing (2N-2):2N as a practical path to accuracy-preserving LLM acceleration. Code available at https://github.com/bcacdwk/vllmbench.

Mainstream LLM serving systems reuse prefix work mainly through paged or radix key-value (KV) caches. This is highly effective for high-throughput, high-concurrency serving, but it manages only one positional fragment of execution state: the KV cache. We study the opposite regime: low-latency, small-batch, on-device physical-AI serving, where interactive LLM agents, speech systems, and robot policies repeatedly branch, reset, interrupt, and re-enter under tight responsiveness budgets. We introduce execution-state capsules, a graph-bound checkpoint and restore mechanism for the complete restorable state at a committed boundary. FlashRT is a white-box, backend-facing kernel runtime whose evaluated NVIDIA CUDA backend runs captured graph plans over contiguous static buffers with no block-table indirection. Because the live state is a closed set of named buffers, a capsule can snapshot, restore, fork, or roll back the whole execution boundary, including KV, recurrent state, convolution state, MTP state, and metadata. This moves reuse from token-addressed KV fragments to graph-bound execution-state boundaries. On an RTX 5090, capsule restore is byte-exact at the stored-state level and token-identical under greedy decode. A KV-only ablation diverges, showing that recurrent state is load-bearing. GPU-resident snapshot and restore are sub-millisecond, and TTFT speedup over cold prefill grows from 3.9x at 2k tokens to 27x at 16k tokens. On Jetson AGX Thor and DGX Spark, the same correctness and structural properties hold. Capsules are not a replacement for high-throughput KV-cache serving; they define a complementary latency-first serving point for explicit execution-state reuse.

TiledAttention is a scaled dot-product attention (SDPA) forward operator for SDPA research on NVIDIA GPUs. Implemented in cuTile Python (TileIR) and exposed as a PyTorch-callable function, it is easier to modify than low-level CUDA templates while retaining realistic behavior via online softmax and tiled K,V streaming. Algorithmically, TiledAttention follows the established FlashAttention-style online-softmax formulation; our novelty is the cuTile/TileIR implementation strategy, schedule-level modifiability, and reproducible benchmarking/profiling workflow. The approach is both performant and directly editable at the schedule level from Python (tile shapes, staging, shared-memory layout), enabling rapid, reproducible kernel research without template-heavy CUDA/CUTLASS rewrites. We benchmark TiledAttention on an NVIDIA DGX GB10 node with a reproducible harness and compare against PyTorch SDPA (auto-dispatch), explicit unfused baselines (torch_sdpa_math, standard eager attention), and forced backend probes (FlashAttention2, EffecientAttention, CuDNN Attention) across sequence length, head dimension, and precision (FP16/BF16). While production fused baselines remain stronger overall, TiledAttention delivers large speedups over standard eager attention paths and is available for direct use within PyTorch workflows, providing a practical balance between performance and customizability.

While accelerated computing has transformed many domains of computing, its impact on logical reasoning, specifically Boolean satisfiability (SAT), remains limited. State-of-the-art SAT solvers rely heavily on inherently sequential conflict-driven search algorithms that offer powerful heuristics but limit the amount of parallelism that could otherwise enable significantly more scalable SAT solving. Inspired by neural network training, we formulate the SAT problem as a binarized matrix-matrix multiplication layer that could be optimized using a differentiable objective function. Enabled by this encoding, we combine the strengths of parallel differentiable optimization and sequential search to accelerate SAT on a hybrid GPU-CPU system. In this system, the GPUs leverage parallel differentiable solving to rapidly evaluate SAT clauses and use gradients to stochastically explore the solution space and optimize variable assignments. Promising partial assignments generated by the GPUs are post-processed on many CPU threads which exploit conflict-driven sequential search to further traverse the solution subspaces and identify complete assignments. Prototyping the hybrid solver on an NVIDIA DGX GB200 node, our solver achieves runtime speedups up to over 200x when compared to a state-of-the-art CPU-based solver on public satisfiable benchmark problems from the SAT Competition.

We present an openly documented methodology for fine-tuning language models to detect temporal attack patterns in multi-agent AI workflows using OpenTelemetry trace analysis. We curate a dataset of 80,851 examples from 18 public cybersecurity sources and 35,026 synthetic OpenTelemetry traces. We apply iterative QLoRA fine-tuning on resource-constrained ARM64 hardware (NVIDIA DGX Spark) through three training iterations with strategic augmentation. Our custom benchmark accuracy improves from 42.86% to 74.29%, a statistically significant 31.4-point gain. Targeted examples addressing specific knowledge gaps outperform indiscriminate scaling. Key contributions include: (1) synthetic trace generation methodology for multi-agent coordination attacks and regulatory violations, (2) empirical evidence that training data composition fundamentally determines behavior, and (3) complete open release of datasets, training scripts, and evaluation benchmarks on HuggingFace. While practical deployment requires human oversight due to false positive rates, this work establishes the first reproducible framework enabling practitioners to build custom agentic security models adapted to their threat landscapes.

In this report, we introduce Eddy-VL 1.9B, a compressed multimodal embedding model built on Qwen3-VL-Embedding-2B for offline, edge-deployable vision-language retrieval. Eddy-VL targets air-gapped forensic and investigative settings where cloud APIs are unavailable and low latency is essential. Compression combines (i) probe-driven structural pruning that removes four redundant text-decoder layers (28 to 24) ranked by adjacent-layer linear CKA, and (ii) layered knowledge distillation with hole-covering teacher-student mappings, mid-layer attention-map 1-CKA, and final-layer MSE and cosine losses with Matryoshka dimensions {128, 256, 512, 1024, 2048}. The released model contains 1,926,188,032 parameters (3.85 GB bf16), representing approximately 9.5% fewer parameters than the 2.13B teacher model. Empirical evaluations on MMEB-V2 (78 tasks, VLM2Vec protocol) show that Eddy-VL achieves an overall score of 63.2 compared with 68.9 for the teacher, retaining 91.7% of the teacher's performance while recovering 6.4 of the 12.1 points lost through pruning alone (56.8). Compositional reasoning performance remains close to the teacher on SugarCrepe (86.1 vs. 86.4), MR2-Bench (24.5 vs. 24.7), and ARO (59.5 vs. 60.4), while Winoground group performance (6.8 vs. 8.5) remains the primary limitation. Depth pruning also reduces forward latency by approximately 10% (150.0 to 136.4 ms per image on NVIDIA DGX Spark using FlashAttention-2). We present the architecture, compression methodology, training procedures, and evaluation results, demonstrating the effectiveness of Eddy-VL for multimodal retrieval under constrained edge deployment. Model weights and inference code are publicly available on Hugging Face.

The rapid progress in Deep Learning (DL) and Large Language Models (LLMs) has exponentially increased demands of computational power and bandwidth. This, combined with the high costs of faster computing chips and interconnects, has significantly inflated High Performance Computing (HPC) construction costs. To address these challenges, we introduce the Fire-Flyer AI-HPC architecture, a synergistic hardware-software co-design framework and its best practices. For DL training, we deployed the Fire-Flyer 2 with 10,000 PCIe A100 GPUs, achieved performance approximating the DGX-A100 while reducing costs by half and energy consumption by 40%. We specifically engineered HFReduce to accelerate allreduce communication and implemented numerous measures to keep our Computation-Storage Integrated Network congestion-free. Through our software stack, including HaiScale, 3FS, and HAI-Platform, we achieved substantial scalability by overlapping computation and communication. Our system-oriented experience from DL training provides valuable insights to drive future advancements in AI-HPC.

Monolithic large language models (LLMs) like GPT-4 have paved the way for modern generative AI applications. Training, serving, and maintaining monolithic LLMs at scale, however, remains prohibitively expensive and challenging. The disproportionate increase in compute-to-memory ratio of modern AI accelerators have created a memory wall, necessitating new methods to deploy AI. Composition of Experts (CoE) is an alternative modular approach that lowers the cost and complexity of training and serving. However, this approach presents two key challenges when using conventional hardware: (1) without fused operations, smaller models have lower operational intensity, which makes high utilization more challenging to achieve; and (2) hosting a large number of models can be either prohibitively expensive or slow when dynamically switching between them. In this paper, we describe how combining CoE, streaming dataflow, and a three-tier memory system scales the AI memory wall. We describe Samba-CoE, a CoE system with 150 experts and a trillion total parameters. We deploy Samba-CoE on the SambaNova SN40L Reconfigurable Dataflow Unit (RDU) - a commercial dataflow accelerator architecture that has been co-designed for enterprise inference and training applications. The chip introduces a new three-tier memory system with on-chip distributed SRAM, on-package HBM, and off-package DDR DRAM. A dedicated inter-RDU network enables scaling up and out over multiple sockets. We demonstrate speedups ranging from 2x to 13x on various benchmarks running on eight RDU sockets compared with an unfused baseline. We show that for CoE inference deployments, the 8-socket RDU Node reduces machine footprint by up to 19x, speeds up model switching time by 15x to 31x, and achieves an overall speedup of 3.7x over a DGX H100 and 6.6x over a DGX A100.

In this paper, we present a novel method that reduces model inference latency during distributed deployment of Large Language Models (LLMs). Our contribution is an optimized inference deployment scheme that address the current limitations of state-of-the-art quantization kernels when used in conjunction with Tensor Parallel (TP). Our method preserves data locality in GPU memory access patterns and exploits a priori knowledge of TP to reduce global communication. We demonstrate an up to 1.81x speedup over existing methods for Llama-70B and up to 1.78x speedup for IBM WatsonX's Granite-20B MLP layer problem sizes on A100 and H100 NVIDIA DGX Systems for a variety of TP settings.

Machine learning models are increasingly embedded in everyday software, and most of their runtime is spent in a small set of compute kernels such as matrix multiplication, convolution, and normalization. Optimizing these kernels is one of the most direct ways to reduce latency and cost, but it has traditionally required expert engineers to hand-write low-level GPU code. Agentic systems built on large language models (LLMs) can now generate and optimize kernels with far less human effort, yet existing tools are largely evaluated on randomly generated tensors and isolated kernels, emit standalone CUDA code that developers must manually reintegrate, mostly target only LLM PyTorch models, and offer limited support for inspecting and debugging results. We present Kernel Forge, an open-source, end-to-end agentic harness that accepts any unmodified PyTorch model in place. Kernel Forge supports vision, diffusion, and LLM workloads, uses Monte Carlo Tree Search (MCTS) to explore multiple optimization paths rather than a single linear refinement chain, and ships with a graphical user interface for monitoring progress, inspecting candidate kernels, and debugging failures. We evaluate Kernel Forge on four PyTorch models spanning vision, diffusion, and LLM workloads on an NVIDIA DGX Spark with GB10 GPU. With only 50 optimization iterations per kernel, it optimizes 14 kernels to outperform PyTorch eager mode, reaching 1.52times on adaptive\_avgpool2d in ResNet-50, 1.70times on group\_norm in Stable Diffusion 3.5 Medium, 2.83times on softmax in Gemma 4 E2B, and 1.54times on softmax in Qwen 3.5 35B-A3B.

There has been significant progress in developing reinforcement learning (RL) training systems. Past works such as IMPALA, Apex, Seed RL, Sample Factory, and others, aim to improve the system's overall throughput. In this paper, we aim to address a common bottleneck in the RL training system, i.e., parallel environment execution, which is often the slowest part of the whole system but receives little attention. With a curated design for paralleling RL environments, we have improved the RL environment simulation speed across different hardware setups, ranging from a laptop and a modest workstation, to a high-end machine such as NVIDIA DGX-A100. On a high-end machine, EnvPool achieves one million frames per second for the environment execution on Atari environments and three million frames per second on MuJoCo environments. When running EnvPool on a laptop, the speed is 2.8x that of the Python subprocess. Moreover, great compatibility with existing RL training libraries has been demonstrated in the open-sourced community, including CleanRL, rl_games, DeepMind Acme, etc. Finally, EnvPool allows researchers to iterate their ideas at a much faster pace and has great potential to become the de facto RL environment execution engine. Example runs show that it only takes five minutes to train agents to play Atari Pong and MuJoCo Ant on a laptop. EnvPool is open-sourced at https://github.com/sail-sg/envpool.

Given the popularity of generative AI, Large Language Models (LLMs) often consume hundreds or thousands of GPUs for parallelizing and accelerating the training process. Communication overhead becomes more pronounced when training LLMs at scale. To eliminate communication overhead in distributed LLM training, we propose Domino, which provides a generic scheme to hide communication behind computation. By breaking data dependency of a single batch training into smaller independent pieces, Domino pipelines these independent pieces training and provides generic strategy of fine-grained communication and computation overlapping. Extensive results show that, comparing with Megatron-LM, Domino achieves up to 1.3x speedup for LLM training on Nvidia DGX-H100 GPUs.

We present Nautile-370M, a 371-million-parameter small language model designed for efficient reasoning under strict parameter and inference budgets. Nautile-370M uses a hybrid backbone in which two SeqCond Attention (SCA) layers, a linear-time spectral sequence operator inspired by SeqCondenser, alternate with one transformer layer. This design aims to retain the long-context efficiency and state-tracking benefits of structured sequential models while preserving the expressive token-to-token routing of attention. The model was trained on a single Cloud TPU v4-64 pod slice provided through the Google TPU Research Cloud (TRC) program; the subsequent reinforcement learning stage was carried out on a single NVIDIA DGX Spark. We prove that the SCA readout mechanism can exactly retrieve any individual token from the prefix summary and can reproduce any output of softmax attention as a special case, establishing that SCA is at least as expressive as full self-attention in the continuous limit. We also describe the training data pipeline and outline a reinforcement learning stage specialized for reasoning, verification, and response quality.

We release the Nemotron-4 340B model family, including Nemotron-4-340B-Base, Nemotron-4-340B-Instruct, and Nemotron-4-340B-Reward. Our models are open access under the NVIDIA Open Model License Agreement, a permissive model license that allows distribution, modification, and use of the models and its outputs. These models perform competitively to open access models on a wide range of evaluation benchmarks, and were sized to fit on a single DGX H100 with 8 GPUs when deployed in FP8 precision. We believe that the community can benefit from these models in various research studies and commercial applications, especially for generating synthetic data to train smaller language models. Notably, over 98% of data used in our model alignment process is synthetically generated, showcasing the effectiveness of these models in generating synthetic data. To further support open research and facilitate model development, we are also open-sourcing the synthetic data generation pipeline used in our model alignment process.

Hash tables are ubiquitous. Properties such as an amortized constant time complexity for insertion and querying as well as a compact memory layout make them versatile associative data structures with manifold applications. The rapidly growing amount of data emerging in many fields motivated the need for accelerated hash tables designed for modern parallel architectures. In this work, we exploit the fast memory interface of modern GPUs together with a parallel hashing scheme tailored to improve global memory access patterns, to design WarpCore -- a versatile library of hash table data structures. Unique device-sided operations allow for building high performance data processing pipelines entirely on the GPU. Our implementation achieves up to 1.6 billion inserts and up to 4.3 billion retrievals per second on a single GV100 GPU thereby outperforming the state-of-the-art solutions cuDPP, SlabHash, and NVIDIA RAPIDS cuDF. This performance advantage becomes even more pronounced for high load factors of over 90%. To overcome the memory limitation of a single GPU, we scale our approach over a dense NVLink topology which gives us close-to-optimal weak scaling on DGX servers. We further show how WarpCore can be used for accelerating a real world bioinformatics application (metagenomic classification) with speedups of over two orders-of-magnitude against state-of-the-art CPU-based solutions. WC is written in C++/CUDA-C and is openly available at https://github.com/sleeepyjack/warpcore.

Converting time domain waveforms to frequency domain spectrograms is typically considered to be a prepossessing step done before model training. This approach, however, has several drawbacks. First, it takes a lot of hard disk space to store different frequency domain representations. This is especially true during the model development and tuning process, when exploring various types of spectrograms for optimal performance. Second, if another dataset is used, one must process all the audio clips again before the network can be retrained. In this paper, we integrate the time domain to frequency domain conversion as part of the model structure, and propose a neural network based toolbox, nnAudio, which leverages 1D convolutional neural networks to perform time domain to frequency domain conversion during feed-forward. It allows on-the-fly spectrogram generation without the need to store any spectrograms on the disk. This approach also allows back-propagation on the waveforms-to-spectrograms transformation layer, which implies that this transformation process can be made trainable, and hence further optimized by gradient descent. nnAudio reduces the waveforms-to-spectrograms conversion time for 1,770 waveforms (from the MAPS dataset) from 10.64 seconds with librosa to only 0.001 seconds for Short-Time Fourier Transform (STFT), 18.3 seconds to 0.015 seconds for Mel spectrogram, 103.4 seconds to 0.258 for constant-Q transform (CQT), when using GPU on our DGX work station with CPU: Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz Tesla v100 32Gb GPUs. (Only 1 GPU is being used for all the experiments.) We also further optimize the existing CQT algorithm, so that the CQT spectrogram can be obtained without aliasing in a much faster computation time (from 0.258 seconds to only 0.001 seconds).