new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Oct 30

"I May Not Have Articulated Myself Clearly": Diagnosing Dynamic Instability in LLM Reasoning at Inference Time

Reasoning failures in large language models (LLMs) are typically measured only at the end of a generation, yet many failures manifest as a process-level breakdown: the model "loses the thread" mid-reasoning. We study whether such breakdowns are detectable from inference-time observables available in standard APIs (token log probabilities), without any training or fine-tuning. We define a simple instability signal that combines consecutive-step distributional shift (JSD) and uncertainty (entropy), summarize each trace by its peak instability strength, and show that this signal reliably predicts failure. Across GSM8K and HotpotQA, instability strength predicts wrong answers with above-chance AUC and yields monotonic bucket-level accuracy decline at scale across model sizes. Crucially, we show that instability is not uniformly harmful: early instability can reflect subsequent stabilization and a correct final answer (corrective instability), whereas late instability is more often followed by failure (destructive instability), even at comparable peak magnitudes, indicating that recoverability depends not only on how strongly the distribution changes but also on when such changes occur relative to the remaining decoding horizon. The method is model-agnostic, training-free, and reproducible, and is presented as a diagnostic lens rather than a corrective or control mechanism.

  • 4 authors
·
Feb 2 3

A Survey of Large Language Models for Data Challenges in Graphs

Graphs are a widely used paradigm for representing non-Euclidean data, with applications ranging from social network analysis to biomolecular prediction. While graph learning has achieved remarkable progress, real-world graph data presents a number of challenges that significantly hinder the learning process. In this survey, we focus on four fundamental data-centric challenges: (1) Incompleteness, real-world graphs have missing nodes, edges, or attributes; (2) Imbalance, the distribution of the labels of nodes or edges and their structures for real-world graphs are highly skewed; (3) Cross-domain Heterogeneity, graphs from different domains exhibit incompatible feature spaces or structural patterns; and (4) Dynamic Instability, graphs evolve over time in unpredictable ways. Recently, Large Language Models (LLMs) offer the potential to tackle these challenges by leveraging rich semantic reasoning and external knowledge. This survey focuses on how LLMs can address four fundamental data-centric challenges in graph-structured data, thereby improving the effectiveness of graph learning. For each challenge, we review both traditional solutions and modern LLM-driven approaches, highlighting how LLMs contribute unique advantages. Finally, we discuss open research questions and promising future directions in this emerging interdisciplinary field. To support further exploration, we have curated a repository of recent advances on graph learning challenges: https://github.com/limengran98/Awesome-Literature-Graph-Learning-Challenges.

  • 14 authors
·
Sep 17, 2025

DVAO: Dynamic Variance-adaptive Advantage Optimization for Multi-reward Reinforcement Learning

Reinforcement Learning has become a standard paradigm for aligning Large Language Models with human intent and task requirements. While Group Relative Policy Optimization offers an efficient, value-model-free alternative to Proximal Policy Optimization, adapting it to real-world multi-reward settings remains challenging. Standard scalarization practices, such as Reward Combination and Advantage Combination, suffer from significant drawbacks: Reward Combination frequently generates advantages with excessively large squared magnitudes that lead to training instability, while Advantage Combination relies on static hyperparameters and ignores cross-objective correlations. To address these limitations, we propose Dynamic Variance-adaptive Advantage Optimization (DVAO), which dynamically adjusts combination weights based on the empirical reward variance of each objective within a rollout group, effectively up-weighting objectives with a stronger learning signal while suppressing noisy ones. We mathematically prove that DVAO maintains bounded advantage magnitudes for stable training and introduces a self-adaptive cross-objective regularization mechanism. Extensive experiments on mathematical reasoning and tool-use benchmarks using Qwen3 and Qwen2.5 models demonstrate that DVAO significantly outperforms baseline methods, achieving a superior multi-objective Pareto frontier and robust training stability.

  • 6 authors
·
May 24 4

Geometric and Dynamic Scaling in Deep Transformers

Despite their empirical success, pushing Transformer architectures to extreme depth often leads to a paradoxical failure: representations become increasingly redundant, lose rank, and ultimately collapse. Existing explanations largely attribute this phenomenon to optimization instability or vanishing gradients, yet such accounts fail to explain why collapse persists even under modern normalization and initialization schemes. In this paper, we argue that the collapse of deep Transformers is fundamentally a geometric problem. Standard residual updates implicitly assume that feature accumulation is always beneficial, but offer no mechanism to constrain update directions or to erase outdated information. As depth increases, this leads to systematic drift off the semantic manifold and monotonic feature accumulation, causing representational degeneracy. We propose a unified geometric framework that addresses these failures through two orthogonal principles. First, manifold-constrained hyper-connections restrict residual updates to valid local tangent directions, preventing uncontrolled manifold drift. Second, deep delta learning introduces data-dependent, non-monotonic updates that enable reflection and erasure of redundant features rather than their unconditional accumulation. Together, these mechanisms decouple the direction and sign of feature updates, yielding a stable geometric evolution across depth. We term the resulting architecture the Manifold-Geometric Transformer (MGT). Our analysis predicts that enforcing geometric validity while allowing dynamic erasure is essential for avoiding rank collapse in ultra-deep networks. We outline an evaluation protocol for Transformers exceeding 100 layers to test the hypothesis that geometry, rather than depth itself, is the key limiting factor in deep representation learning.

  • 2 authors
·
Jan 2

HPNet: Dynamic Trajectory Forecasting with Historical Prediction Attention

Predicting the trajectories of road agents is essential for autonomous driving systems. The recent mainstream methods follow a static paradigm, which predicts the future trajectory by using a fixed duration of historical frames. These methods make the predictions independently even at adjacent time steps, which leads to potential instability and temporal inconsistency. As successive time steps have largely overlapping historical frames, their forecasting should have intrinsic correlation, such as overlapping predicted trajectories should be consistent, or be different but share the same motion goal depending on the road situation. Motivated by this, in this work, we introduce HPNet, a novel dynamic trajectory forecasting method. Aiming for stable and accurate trajectory forecasting, our method leverages not only historical frames including maps and agent states, but also historical predictions. Specifically, we newly design a Historical Prediction Attention module to automatically encode the dynamic relationship between successive predictions. Besides, it also extends the attention range beyond the currently visible window benefitting from the use of historical predictions. The proposed Historical Prediction Attention together with the Agent Attention and Mode Attention is further formulated as the Triple Factorized Attention module, serving as the core design of HPNet.Experiments on the Argoverse and INTERACTION datasets show that HPNet achieves state-of-the-art performance, and generates accurate and stable future trajectories. Our code are available at https://github.com/XiaolongTang23/HPNet.

  • 6 authors
·
Apr 9, 2024

SeeDNorm: Self-Rescaled Dynamic Normalization

Normalization layer constitutes an essential component in neural networks. In transformers, the predominantly used RMSNorm constrains vectors to a unit hypersphere, followed by dimension-wise rescaling through a learnable scaling coefficient γ to maintain the representational capacity of the model. However, RMSNorm discards the input norm information in forward pass and a static scaling factor γ may be insufficient to accommodate the wide variability of input data and distributional shifts, thereby limiting further performance improvements, particularly in zero-shot scenarios that large language models routinely encounter. To address this limitation, we propose SeeDNorm, which enhances the representational capability of the model by dynamically adjusting the scaling coefficient based on the current input, thereby preserving the input norm information and enabling data-dependent, self-rescaled dynamic normalization. During backpropagation, SeeDNorm retains the ability of RMSNorm to dynamically adjust gradient according to the input norm. We provide a detailed analysis of the training optimization for SeedNorm and proposed corresponding solutions to address potential instability issues that may arise when applying SeeDNorm. We validate the effectiveness of SeeDNorm across models of varying sizes in large language model pre-training as well as supervised and unsupervised computer vision tasks. By introducing a minimal number of parameters and with neglligible impact on model efficiency, SeeDNorm achieves consistently superior performance compared to previously commonly used normalization layers such as RMSNorm and LayerNorm, as well as element-wise activation alternatives to normalization layers like DyT.

  • 4 authors
·
Oct 26, 2025

LEAD: Length-Efficient Adaptive and Dynamic Reasoning for Large Language Models

Large reasoning models, such as OpenAI o1 and DeepSeek-R1, tend to become increasingly verbose as their reasoning capabilities improve. These inflated Chain-of-Thought (CoT) trajectories often exceed what the underlying problems require, wasting compute, latency, and context budgets. While introducing length-based efficiency rewards during reinforcement learning offers a natural remedy, existing methods struggle with two fundamental challenges: the optimal balance between correctness and efficiency is non-stationary throughout training, and intrinsic reasoning budgets vary drastically across problems. Relying on static reward weights and global length constraints inevitably forces a compromise between degraded accuracy and unrealized compression. To overcome these limitations, we propose LEAD (Length-Efficient Adaptive and Dynamic reasoning), a method that replaces static heuristics with online, self-adaptive mechanisms. LEAD dynamically calibrates the correctness-efficiency trade-off at each step using a Potential-Scaled Instability, directing optimization capacity to the most informative learning signal. Furthermore, it estimates an adaptive per-problem target length online based on the model's own correct rollouts, applying a symmetric efficiency reward that penalizes both overthinking and over-compression. Evaluated on five mathematical reasoning benchmarks, LEAD achieves the highest accuracy and Accuracy-Efficiency Score among RL-trained efficient-reasoning methods while producing substantially shorter outputs than the base model.

Orchestrating Tokens and Sequences: Dynamic Hybrid Policy Optimization for RLVR

Reinforcement Learning with Verifiable Rewards (RLVR) offers a promising framework for optimizing large language models in reasoning tasks. However, existing RLVR algorithms focus on different granularities, and each has complementary strengths and limitations. Group Relative Policy Optimization (GRPO) updates the policy with token-level importance ratios, which preserves fine-grained credit assignment but often suffers from high variance and instability. In contrast, Group Sequence Policy Optimization (GSPO) applies single sequence-level importance ratios across all tokens in a response that better matches sequence-level rewards, but sacrifices token-wise credit assignment. In this paper, we propose Dynamic Hybrid Policy Optimization (DHPO) to bridge GRPO and GSPO within a single clipped surrogate objective. DHPO combines token-level and sequence-level importance ratios using weighting mechanisms. We explore two variants of the mixing mechanism, including an averaged mixing and an entropy-guided mixing. To further stabilize training, we employ a branch-specific clipping strategy that constrains token-level and sequence-level ratios within separate trust regions before mixing, preventing outliers in either branch from dominating the update. Across seven challenging mathematical reasoning benchmarks, experiments on both dense and MoE models from the Qwen3 series show that DHPO consistently outperforms GRPO and GSPO. We will release our code upon acceptance of this paper.

  • 7 authors
·
Jan 9

ADORA: Training Reasoning Models with Dynamic Advantage Estimation on Reinforcement Learning

Reinforcement learning has become a cornerstone technique for developing reasoning models in complex tasks, ranging from mathematical problem-solving to imaginary reasoning. The optimization of these models typically relies on policy gradient methods, whose efficacy hinges on the accurate estimation of an advantage function. However, prevailing methods typically employ static advantage estimation, a practice that leads to inefficient credit assignment by neglecting the dynamic utility of training samples over time. This limitation results in suboptimal policy updates, which in turn manifest as slower convergence rates and increased learning instability, as models fail to adapt to evolving sample utilities effectively. To address this problem, we introduce ADORA (Advantage Dynamics via Online Rollout Adaptation), a novel framework for policy optimization. ADORA dynamically adjusts the advantage function's weighting by adaptively categorizing training data into temporarily advantageous and disadvantageous samples, based on their evolving utility during online model rollouts. This tailored data differentiation strategy allows ADORA to be seamlessly integrated into existing policy optimization algorithms without significant architectural modifications, enabling the policy to prioritize learning from more informative experiences and thereby achieve more efficient policy updates. Extensive evaluations across diverse model families and varying data scales demonstrate that ADORA is a robust and efficient framework. It significantly enhances long reasoning in both geometric and mathematical tasks, consistently achieving notable performance gains without requiring sensitive hyperparameter tuning.

  • 7 authors
·
Feb 10

A Kiloparsec-Scale Stellar Cavity in the Center of Abell402-BCG May be Caused by Dynamic Interactions with an Ultramassive Black Hole

We present new observations from JWST NIRCam that reveal a striking kpc-wide cavity in the stellar distribution of the central galaxy in the cluster Abell402. Supporting data from HST allow us to rule out extinction due to dust as an explanation and, instead, suggest that this is a localized depression in the stellar density field corresponding to ~2x10^9 Msun in missing stars within a volume of 0.5kpc^3. On larger scales, both the JWST and HST data show evidence for a 2.2kpc flattened core in the stellar distribution (on which the smaller-scale cavity is superimposed), which implies the presence of a central ultra-massive black hole with M_BH = 6 +/- 4 x10^10 Msun. We report evidence for a mid-IR-bright point source at one edge of the cavity, suggesting that this black hole is actively accreting. MUSE spectroscopy reveal that this source is a LINER AGN and that there is a second candidate AGN on the opposite side of the cavity with a relative velocity of 370km/s -- if real, this implies the presence of a kpc-separation dual AGN with a total binary mass of 6 +/- 2 x10^10 Msun, which would make this the most massive binary black hole system discovered to date. We propose that this unique stellar cavity is the result of a short-lived dynamical interaction between at least one supermassive black hole and the background stellar density field, caused either by three-body scattering during binary hardening or the induction of a dipole instability in the stellar density field.

  • 21 authors
·
Mar 10

StableWorld: Towards Stable and Consistent Long Interactive Video Generation

In this paper, we explore the overlooked challenge of stability and temporal consistency in interactive video generation, which synthesizes dynamic and controllable video worlds through interactive behaviors such as camera movements and text prompts. Despite remarkable progress in world modeling, current methods still suffer from severe instability and temporal degradation, often leading to spatial drift and scene collapse during long-horizon interactions. To better understand this issue, we initially investigate the underlying causes of instability and identify that the major source of error accumulation originates from the same scene, where generated frames gradually deviate from the initial clean state and propagate errors to subsequent frames. Building upon this observation, we propose a simple yet effective method, StableWorld, a Dynamic Frame Eviction Mechanism. By continuously filtering out degraded frames while retaining geometrically consistent ones, StableWorld effectively prevents cumulative drift at its source, leading to more stable and temporal consistency of interactive generation. Promising results on multiple interactive video models, \eg, Matrix-Game, Open-Oasis, and Hunyuan-GameCraft, demonstrate that StableWorld is model-agnostic and can be applied to different interactive video generation frameworks to substantially improve stability, temporal consistency, and generalization across diverse interactive scenarios.

  • 9 authors
·
Jan 21

Anchored Supervised Fine-Tuning

Post-training of large language models involves a fundamental trade-off between supervised fine-tuning (SFT), which efficiently mimics demonstrations but tends to memorize, and reinforcement learning (RL), which achieves better generalization at higher computational cost. Dynamic Fine-Tuning (DFT) recently emerged as a promising middle ground, reweighting SFT objectives with token probabilities and achieving improvements in certain reasoning domains, though it exhibits instability in other tasks. We provide a analysis of DFT through the reward-weighted regression (RWR) framework, revealing that it corresponds to a specific auxiliary distribution choice that yields provably tighter RL bounds than standard SFT. However, our analysis also uncovers a critical limitation: this construction lacks distributional anchoring, leading to progressive drift that undermines training stability. To address this, we propose Anchored Supervised Fine-Tuning (ASFT), which augments DFT's reweighting with lightweight KL regularization to preserve tightness while ensuring stability. Empirically, ASFT consistently outperforms both SFT and DFT across mathematical reasoning, medical knowledge grounding, and code generation, achieving substantial improvements with minimal computational overhead. Our RWR framework provides a systematic lens for understanding post-training methods and demonstrates that principled theoretical analysis leads to both stronger guarantees and practical gains.

  • 7 authors
·
Sep 28, 2025

StableVQ: Practical Guidelines for Stable Vector-Quantized Tokenizer Training

Vector Quantization (VQ) is fundamental to discrete visual tokenizers that power modern autoregressive and masked image generation models. While recent shared-projection codebook methods have substantially advanced codebook utilization, training stability remains a critical and underexplored challenge. We argue that the root cause lies in the entanglement of the Encoder--Decoder and Codebook training: because neither module can reliably fulfill its own responsibility in isolation, the system can only function when the two subsystems happen to cooperate---a fragile condition that breaks down precisely when training is most stressed. We propose StableVQ, which revisits the proper learning objective of each module and resolves the problems that arise when each is trained to fulfill its own role independently. Concretely, (1) Dynamic STE corrects the instability in the Encoder's learning objective, enabling it to robustly optimize the reconstruction space under discrete regularization even when codebook utilization is low. (2) Region VQ Loss reconceives the Codebook's learning objective so that it can independently guarantee full tracking of the encoder output distribution, without relying on encoder oscillations to drive activation. (3) Decoupled Schedule recognizes that the distinct responsibilities of the Encoder--Decoder and the Codebook demand distinct optimization dynamics, and assigns each an independent learning rate schedule to ensure robust system-level behavior. Built on top of shared-projection codebooks, StableVQ is lightweight and introduces no learnable parameters. Experiments on ImageNet demonstrate consistent improvements in training stability, codebook utilization, and reconstruction quality across diverse codebook sizes and initialization settings.

HybriMoE: Hybrid CPU-GPU Scheduling and Cache Management for Efficient MoE Inference

The Mixture of Experts (MoE) architecture has demonstrated significant advantages as it enables to increase the model capacity without a proportional increase in computation. However, the large MoE model size still introduces substantial memory demands, which usually requires expert offloading on resource-constrained platforms and incurs significant overhead. Hybrid CPU-GPU inference has been proposed to leverage CPU computation to reduce expert loading overhead but faces major challenges: on one hand, the expert activation patterns of MoE models are highly unstable, rendering the fixed mapping strategies in existing works inefficient; on the other hand, the hybrid CPU-GPU schedule for MoE is inherently complex due to the diverse expert sizes, structures, uneven workload distribution, etc. To address these challenges, in this paper, we propose HybriMoE, a hybrid CPU-GPU inference framework that improves resource utilization through a novel CPU-GPU scheduling and cache management system. HybriMoE introduces (i) a dynamic intra-layer scheduling strategy to balance workloads across CPU and GPU, (ii) an impact-driven inter-layer prefetching algorithm, and (iii) a score-based caching algorithm to mitigate expert activation instability. We implement HybriMoE on top of the kTransformers framework and evaluate it on three widely used MoE-based LLMs. Experimental results demonstrate that HybriMoE achieves an average speedup of 1.33times in the prefill stage and 1.70times in the decode stage compared to state-of-the-art hybrid MoE inference framework. Our code is available at: https://github.com/PKU-SEC-Lab/HybriMoE.

  • 6 authors
·
Apr 8, 2025 2

ARISE: An Adaptive Resolution-Aware Metric for Test-Time Scaling Evaluation in Large Reasoning Models

Test-time scaling has emerged as a transformative paradigm for enhancing the performance of large reasoning models, enabling dynamic allocation of computational resources during inference. However, as the landscape of reasoning models rapidly expands, a critical question remains: how can we systematically compare and evaluate the test-time scaling capabilities across different models? In this paper, we introduce ARISE (Adaptive Resolution-aware Scaling Evaluation), a novel metric specifically designed to assess the test-time scaling effectiveness of large reasoning models. Unlike existing evaluation approaches, ARISE incorporates two key innovations: (1) sample-level awareness that effectively penalizes negative scaling behaviors where increased computation leads to performance degradation, and (2) a dynamic sampling mechanism that mitigates the impact of accuracy fluctuations and token count instability on the final assessment. We conduct comprehensive experiments evaluating state-of-the-art reasoning models across diverse domains including mathematical reasoning, code generation, and agentic tasks. Our results demonstrate that ARISE provides a reliable and fine-grained measurement of test-time scaling capabilities, revealing significant variations in scaling efficiency across models. Notably, our evaluation identifies Claude Opus as exhibiting superior scaling characteristics compared to other contemporary reasoning models.

  • 7 authors
·
Oct 7, 2025

OPDSearch+: On-Policy Distillation with RL Refinement for Search-Augmented Reasoning

Search-augmented reasoning remains difficult for small language models. On-policy distillation (OPD) from trained teachers offers a promising direction, but suffers from two issues: (1) high-quality multi-turn search trajectories depend on dynamic retriever responses, making SFT data prohibitively expensive to collect at scale; (2) task-specifically trained teachers incur substantial training cost, while directly applying OPD with an off-the-shelf teacher without task-specific fine-tuning constrains the student to the teacher's performance ceiling and suffers from severe training instability. We propose OPDSearch+, the first distillation paradigm that requires no teacher fine-tuning for search-augmented reasoning. We investigate the role of a frozen off-the-shelf instruct model as the teacher in on-policy distillation, and reveal a key insight: the teacher reshapes the student's policy distribution so that subsequent RL converges to a superior solution that RL alone cannot reach. In stage one, the student interacts with a live search engine and is distilled via a per-position forward KL objective, transferring reasoning decomposition and evidence integration skills without any task-specific teacher training. In stage two, RL refines the distilled student from a richer behavioral foundation, achieving performance that RL alone cannot reach from scratch. Across seven QA benchmarks, OPDSearch+ with a 3B model consistently outperforms all prior 3B RL baselines, achieving gains of 13.1% on HotpotQA and 8.5% on 2WikiMultihopQA.

  • 9 authors
·
Aug 24

DyFraNet: Forecasting and Backcasting Dynamic Fracture Mechanics in Space and Time Using a 2D-to-3D Deep Neural Network

The dynamics of materials failure is one of the most critical phenomena in a range of scientific and engineering fields, from healthcare to structural materials to transportation. In this paper we propose a specially designed deep neural network, DyFraNet, which can predict dynamic fracture behaviors by identifying a complete history of fracture propagation - from cracking onset, as a crack grows through the material, modeled as a series of frames evolving over time and dependent on each other. Furthermore, this model can not only forecast future fracture processes but also backcast to elucidate the past fracture history. In this scenario, once provided with the outcome of a fracture event, the model will elucidate past events that led to this state and will predict the future evolution of the failure process. By comparing the predicted results with atomistic-level simulations and theory, we show that DyFraNet can capture dynamic fracture mechanics by accurately predicting how cracks develop over time, including measures such as the crack speed, as well as when cracks become unstable. We use GradCAM to interpret how DyFraNet perceives the relationship between geometric conditions and fracture dynamics and we find DyFraNet pays special attention to the areas around crack tips, which have a critical influence in the early stage of fracture propagation. In later stages, the model pays increased attention to the existing or newly formed damage distribution in the material. The proposed approach offers significant potential to accelerate the exploration of the dynamics in material design against fracture failures and can be beneficially adapted for all kinds of dynamical engineering problems.

  • 2 authors
·
Nov 15, 2022

A Cumulative Framework for Solid Deformation

A cumulative variational framework for solid deformation is proposed. Its central organizing principle is the recursive combination of three structural components of one material body: a compatible Cosserat component, a distributed-incompatibility component, and a defect-source component. At any prescribed external condition these components constitute a combined material state. They are governed under common physical boundary and initial conditions and are coupled through one cumulative energy and the associated field equations. They are not separate boundary-value problems and need not appear in a prescribed temporal sequence. The cumulative character of the framework concerns the response of the combined state to variation of externally prescribed conditions. For the special case of an initially perfect body, loss of stability may produce successive branches with defect and then source participation. Such a sequence is a bifurcation property of the selected initial state and constitutive energy, rather than a defining hierarchy of the framework. A one-dimensional specialization illustrates structural bifurcation, residual deformation and residual stress produced by retained structure, dependence on the initial combined state, directional memory under reverse loading, parametric cumulative hysteresis, and changes of observable tangent stiffness associated with structural stabilization. A spatial extension introduces defect and source gradient terms and yields a size-dependent structural stability operator. For the stable quartic energy considered, the gradient terms regularize nonuniform perturbations but do not by themselves generate a finite-wavelength localization instability on an already stable three-component branch. The examples thereby distinguish consequences of the cumulative structure and energy from phenomena requiring additional constitutive evolution laws.

  • 1 authors
·
Sep 16

Energy-barrier characterization of secured basins in coupled oscillators with inertia

The second-order Kuramoto model captures rotor dynamics relevant to synchronization in power grids. In actual power grids, violation of angle-stability limits can trigger protective actions that are not included in the model, restricting its validity to trajectories that remain within these limits. We therefore define the secured basin as the region of disturbance space comprising disturbances whose trajectories remain within the angle-stability limits throughout the transient. We then characterize the secured basin through energy barriers, quantifying their characteristic energy scale and heterogeneity across perturbation directions. Across seven power-grid models, this characterization revealed angle-stability vulnerabilities overlooked when stability is assessed solely by the final synchronization state. It also showed that the two energy-barrier measures characterizing the secured basin exhibit distinct associations with structural connectivity and dynamical parameters. This characterization further offers practical advantages, as energy thresholds derived from state-space perturbations remain effective in distinguishing secured and unsecured outcomes under short-duration power disturbances and can be estimated efficiently by concentrating simulations near the secured-basin boundary. Overall, the secured-basin framework provides a useful basis for distinguishing node-level structural and dynamical influences on transient stability in oscillator networks with synchronization constraints.

  • 6 authors
·
Oct 7

Droplet-triggered Faraday waves in a vertically forced bath

Repeated impacts of a droplet on a vertically forced bath can produce a growing Faraday-wave response under forcing conditions for which the corresponding initially undisturbed bath remains linearly stable. We investigate this mechanism using axisymmetric two-phase direct numerical simulations over a wide range of Reynolds and Weber numbers. The resulting phenomenological regime map identifies quasi-periodic, decaying, faint, and unstable-bath responses. Along the parameter path considered here, the transition to the unstable-bath regime occurs over a narrow range of Weber numbers and varies only weakly with Reynolds number. In the unstable regime, the bath develops a coherent subharmonic response at half the forcing frequency, while disturbances in the decaying regime remain broadband and weaken between successive rebounds. Bath-only simulations show that a finite-amplitude perturbation representative of droplet impact can seed the confined radial mode susceptible to parametric forcing, initiating a growing subharmonic response below the linear instability threshold of the initially flat bath. A reduced capillary-dominated model provides a scaling estimate for the impact-equivalent perturbation amplitude, and bath-only simulations initialized with these perturbations reproduce the bounded-to-growing transition observed in the coupled simulations. Floquet analysis of the finite cylindrical bath identifies the first axisymmetric Neumann mode as having the lowest subharmonic instability threshold. A time-resolved Bessel decomposition independently shows that the growing bath response is dominated by the same radial mode, while the droplet-induced subharmonic response projects predominantly onto this structure. These results identify a finite-amplitude route by which localized droplet impacts can access Faraday-wave dynamics below the linear onset threshold of an initially undisturbed bath.

  • 2 authors
·
Oct 3

Resource supply dynamics control stability and chaos in complex ecosystems

Ecological interactions are often mediated by feedbacks between organisms and their resource environments. Yet, how resource supply dynamics dictate collective dynamical phases of an ecosystem remains unclear. Here, we analyse a generalised consumer--resource model with non-reciprocal interactions to demonstrate that self-renewing versus externally-supplied resources yield fundamentally different dynamical phase diagrams. As interactions become increasingly non-reciprocal, ecosystems relying on self-renewing resources transition from stable dynamics to chaos and ultimately to infeasibility. By contrast, ecosystems with externally-supplied resources remain stable over a broader parameter range and transition to infeasibility without experiencing an intervening chaotic phase. Using the cavity method, we derive a unified stability condition applicable to a broad class of resource supply functions, explaining why externally-supplied resources can expand the stable region. We show that stability hinges crucially on the susceptibility of resources to perturbations, which depends strongly on their supply. Further, we show that external resource supply suppresses chaos in the unstable region by drastically reducing the susceptibility of resources closest to extinction. Our findings demonstrate that resource dynamics fundamentally reshape the accessible dynamical behaviours of an ecosystem, with implications for interpreting microbial community experiments.

  • 3 authors
·
Aug 30

Simply Stabilizing the Loop via Fully Looped Transformer

Scaling model performance typically requires increasing model size. Looped Transformer offers a compelling alternative by iteratively reusing the same Transformer blocks, trading additional computation for improved performance without increasing parameter count or context length. Because the number of loop iterations can be adjusted at inference, it also provides a natural mechanism for balancing performance and test-time compute. However, Looped Transformer still suffers from training instability when the number of loop iterations increases. Our analysis reveals that this instability stems from two sources: gradient oscillation and residual explosion. To address these two problems, we propose the Fully Looped Transformer, which introduces two parameter-free modifications: (1) Fully Looped Architecture, which distributes inter-loop signals across all layers to mitigate residual explosion; (2) Attention Injection, which reuses the existing attention block to suppress gradient oscillation. These modifications stabilize training dynamics, enabling the Fully Looped Transformer to be trained stably up to 12 loop iterations, whereas other baseline looped models collapse in this regime. In milder settings where Looped Transformer does not collapse, Fully Looped Transformer still improves average downstream-task performance by up to 13.2\%. Overall, our experiments demonstrate that Fully Looped Transformer improves training stability, enhances downstream performance, and provides preliminary adaptability under different test-time compute budgets by varying loop iterations at inference.

  • 7 authors
·
May 24

DDoS-UNet: Incorporating temporal information using Dynamic Dual-channel UNet for enhancing super-resolution of dynamic MRI

Magnetic resonance imaging (MRI) provides high spatial resolution and excellent soft-tissue contrast without using harmful ionising radiation. Dynamic MRI is an essential tool for interventions to visualise movements or changes of the target organ. However, such MRI acquisition with high temporal resolution suffers from limited spatial resolution - also known as the spatio-temporal trade-off of dynamic MRI. Several approaches, including deep learning based super-resolution approaches, have been proposed to mitigate this trade-off. Nevertheless, such an approach typically aims to super-resolve each time-point separately, treating them as individual volumes. This research addresses the problem by creating a deep learning model which attempts to learn both spatial and temporal relationships. A modified 3D UNet model, DDoS-UNet, is proposed - which takes the low-resolution volume of the current time-point along with a prior image volume. Initially, the network is supplied with a static high-resolution planning scan as the prior image along with the low-resolution input to super-resolve the first time-point. Then it continues step-wise by using the super-resolved time-points as the prior image while super-resolving the subsequent time-points. The model performance was tested with 3D dynamic data that was undersampled to different in-plane levels. The proposed network achieved an average SSIM value of 0.951pm0.017 while reconstructing the lowest resolution data (i.e. only 4\% of the k-space acquired) - which could result in a theoretical acceleration factor of 25. The proposed approach can be used to reduce the required scan-time while achieving high spatial resolution.

  • 5 authors
·
Feb 10, 2022

Transition from decaying to decayless kink oscillations of solar coronal loops

The transition of an impulsively excited kink oscillation of a solar coronal loop to an oscillation with a stationary amplitude, i.e., the damping pattern, is determined using the low-dimensional self-oscillation model. In the model, the decayless kink oscillations are sustained by the interaction of the oscillating loop with an external quasi-steady flow. The analytical solution is based on the assumption that the combined effect of the effective dissipation, for example, by resonant absorption, and interaction with an external flow, is weak. The effect is characterised by a dimensionless coupling parameter. The damping pattern is found to depend upon the initial amplitude and the coupling parameter. The approximate expression shows a good agreement with a numerical solution of the self-oscillation equation. The plausibility of the established damping pattern is demonstrated by an observational example. Notably, the damping pattern is not exponential, and the characteristic decay time is different from the time determined by the traditionally used exponential damping fit. Implications of this finding for seismology of the solar coronal plasmas are discussed. In particular, it is suggested that a very rapid, in less than the oscillation period, decay of the oscillation to the stationary level, achieved for larger values of the coupling parameter, can explain the relative rareness of the kink oscillation events.

  • 3 authors
·
Jun 10, 2024

Delayed Repression and Emergent Instability in Adaptive Multi-Agent Systems

Regulatory institutions (from content moderation platforms to financial supervisors) observe, deliberate, and intervene only after a characteristic delay. We ask whether this processing lag alone can destabilize a multi-agent system that would otherwise remain stable, without exogenous shocks, coordination among agents, or malicious actors. We study this question in two stages. First, we analyze a delayed replicator equation in which autonomous agents receive a benefit from radical behavior but face punishment based on a lagged institutional alarm signal. We derive a closed-form critical delay threshold beyond which the unique interior equilibrium loses stability through a Hopf bifurcation, and prove via center manifold reduction that the bifurcation is supercritical (producing bounded oscillations, not explosive growth) for the entire sigmoid response-function family. Second, we embed N=240 agents on a network and equip them with reinforcement learning (tabular Q-learning), comparing three decision architectures in a factorial design: non-reactive agents (fixed policy), reactive agents (threshold heuristic without memory), and Q-learning agents (adaptive with cumulative value estimates). The results reveal a hierarchy opposite to the naive expectation that learning amplifies instability: non-reactive agents are immune to delay (0% runaway across all tested values), reactive agents collapse catastrophically (96% runaway by delay geq 8 steps), and Q-learning agents achieve partial resilience (66% runaway at delay = 20). The destabilizing ingredient is reactivity to delayed signals: agents that immediately exploit low-alarm windows trigger oscillatory feedback loops. Learning buffers this through implicit punishment memory encoded in Q-values

  • 1 authors
·
May 27

The Predicted-Updates Dynamic Model: Offline, Incremental, and Decremental to Fully Dynamic Transformations

We formulate the predicted-updates dynamic model, one of the first beyond-worst-case models for dynamic algorithms, which generalizes a large set of well-studied dynamic models including the offline dynamic, incremental, and decremental models to the fully dynamic setting when given predictions about the update times of the elements. In the most basic form of our model, we receive a set of predicted update times for all of the updates that occur over the event horizon. We give a novel framework that "lifts" offline divide-and-conquer algorithms into the fully dynamic setting with little overhead. Using this, we are able to interpolate between the offline and fully dynamic settings; when the ell_1 error of the prediction is linear in the number of updates, we achieve the offline runtime of the algorithm (up to poly log n factors). Provided a fully dynamic backstop algorithm, our algorithm will never do worse than the backstop algorithm regardless of the prediction error. Furthermore, our framework achieves a smooth linear trade-off between ell_1 error in the predictions and runtime. These correspond to the desiderata of consistency, robustness, and graceful degradation of the algorithms-with-predictions literature. We further extend our techniques to incremental and decremental settings, transforming algorithms in these settings when given predictions of only the deletion and insertion times, respectively. Our framework is general, and we apply it to obtain improved efficiency bounds over the state-of-the-art dynamic algorithms for a variety of problems including triconnectivity, planar digraph all pairs shortest paths, k-edge connectivity, and others, for prediction error of reasonable magnitude.

  • 2 authors
·
Jul 17, 2023

An Idealized Delay-Differential Model of Scuba Diver Porpoising and Runaway Ascent

A scuba diver holding constant depth balances on an unstable equilibrium: the gas carried in the suit and buoyancy compensator compresses with depth, so the buoyant force falls as the diver sinks and rises as the diver ascends. We represent the diver as a proportional-derivative controller that regulates this compressible-buoyancy saddle after a finite reaction delay, and we derive the governing delay differential equation from the vertical force balance and the isothermal gas law, reducing it to a damping ratio, two control gains, and a dimensionless delay. The characteristic spectrum, obtained by pseudospectral collocation of the semigroup generator and checked against a direct Newton solution of the characteristic equation, locates the Hopf boundary that separates stable hovering from sustained porpoising; for the baseline diver the critical reaction delay is 3.36 s and the onset period is 28.8 s. The bifurcation is supercritical, and because the saturating force is the quadratic hydrodynamic drag, the limit-cycle amplitude grows in proportion to the delay excess rather than as its square root. The safe-operating envelope shows that runaway ascent is triggered by saturation of the compensator, not by loss of linear stability, so a stable and an unstable diver can share the same escape threshold. As onset is approached, the lag-one autocorrelation and variance rise while the fitted recovery rate falls and matches the spectral abscissa, giving an eigenvalue-exact early warning of the transition.

  • 8 authors
·
Aug 14

Small-scale proxies for large-scale Transformer training instabilities

Teams that have trained large Transformer-based models have reported training instabilities at large scale that did not appear when training with the same hyperparameters at smaller scales. Although the causes of such instabilities are of scientific interest, the amount of resources required to reproduce them has made investigation difficult. In this work, we seek ways to reproduce and study training stability and instability at smaller scales. First, we focus on two sources of training instability described in previous work: the growth of logits in attention layers (Dehghani et al., 2023) and divergence of the output logits from the log probabilities (Chowdhery et al., 2022). By measuring the relationship between learning rate and loss across scales, we show that these instabilities also appear in small models when training at high learning rates, and that mitigations previously employed at large scales are equally effective in this regime. This prompts us to investigate the extent to which other known optimizer and model interventions influence the sensitivity of the final loss to changes in the learning rate. To this end, we study methods such as warm-up, weight decay, and the muParam (Yang et al., 2022), and combine techniques to train small models that achieve similar losses across orders of magnitude of learning rate variation. Finally, to conclude our exploration we study two cases where instabilities can be predicted before they emerge by examining the scaling behavior of model activation and gradient norms.

  • 16 authors
·
Sep 25, 2023 2

Generalized Teacher Forcing for Learning Chaotic Dynamics

Chaotic dynamical systems (DS) are ubiquitous in nature and society. Often we are interested in reconstructing such systems from observed time series for prediction or mechanistic insight, where by reconstruction we mean learning geometrical and invariant temporal properties of the system in question (like attractors). However, training reconstruction algorithms like recurrent neural networks (RNNs) on such systems by gradient-descent based techniques faces severe challenges. This is mainly due to exploding gradients caused by the exponential divergence of trajectories in chaotic systems. Moreover, for (scientific) interpretability we wish to have as low dimensional reconstructions as possible, preferably in a model which is mathematically tractable. Here we report that a surprisingly simple modification of teacher forcing leads to provably strictly all-time bounded gradients in training on chaotic systems, and, when paired with a simple architectural rearrangement of a tractable RNN design, piecewise-linear RNNs (PLRNNs), allows for faithful reconstruction in spaces of at most the dimensionality of the observed system. We show on several DS that with these amendments we can reconstruct DS better than current SOTA algorithms, in much lower dimensions. Performance differences were particularly compelling on real world data with which most other methods severely struggled. This work thus led to a simple yet powerful DS reconstruction algorithm which is highly interpretable at the same time.

  • 4 authors
·
Jun 7, 2023

Feature Lottery? A Bifurcation Theory of Concept Emergence

Neural networks acquire structured representations at specific moments during training, yet identifying these transitions typically relies on retrospective, label-dependent metrics. We introduce a bifurcation theory of representation dynamics to detect these moments in real time. Analyzing a passive GMM probe attached to the evolving encoder, we show the onset of structure corresponds to a supercritical pitchfork bifurcation driven by the loss Hessian. The system exhibits a theoretically predictable zero-crossing (β_c) that, compared to the network's current state (β), yields a dynamic ratio β(t)/β_c(t): a universal, label-free phase coordinate for representation dynamics, computable entirely from hidden states. We empirically validate four distinct transition regimes predicted by this coordinate across diverse settings: SAEs on language models (Pythia), SSL (CIFAR), and grokking (modular arithmetic). Crucially, under finite dissipation, macroscopic symmetry-breaking can lag the initial zero-crossing by orders of magnitude, which providing a rigorous dynamical account of the delayed escape observed in grokking. Microscopically, the bifurcation creates a shared unstable subspace, forcing collective symmetry breaking. We term this the "feature lottery" in SAE training: a feature's terminal interpretability becomes predictable remarkably early. By only 5% of training, early atom purity robustly predicts final convergence purity, with top-decile early atoms achieving over 12x the baseline purity at convergence. Beyond explaining concept emergence, β/β_c provides a practical early-warning indicator for training health, detecting the onset of usable structure, the crystallization of feature identity, and representational collapse epochs before downstream metrics react.

  • 1 authors
·
May 21

Dynamics around non-spherical symmetric bodies - III. The case of a spherical body with a crater

Motivated by the peculiar features of the trans-Neptunian object (TNO) Máni and the discovery of ring systems around Centaurs and trans-Neptunian bodies, we investigate the stability of particles around a small irregular body hosting a deep equatorial crater. This study is the third contribution in a sequence devoted to the dynamics around non-spherically symmetric bodies. Using Máni as a reference model, whose crater depth exceeds 10% of its radius, we map the system stability through complementary methods: Poincaré surfaces of section (PSS), survival maps, and the finite-time Lyapunov exponent (FTLE). In the nominal case, the 1!:!1, 2!:!1, 3!:!1, and 4!:!1 spin-orbit resonances (SORs) are consistently identified by all techniques. The prominent 3!:!1 SOR exhibits a bifurcated structure at high eccentricities, matching structural transitions observed at lower Jacobi constant values in the PSSs. Increasing the rotation rate (λ) and crater mass ratio (μ) enlarges resonance widths and promotes overlap, making the 2!:!1 and 4!:!1 SORs progressively dominant. Lower rotation rates allow stable trajectories to persist at higher eccentricities, whereas the 1!:!1 SOR is highly sensitive to stronger perturbations and disappears in the most extreme cases. In contrast to mass-anomaly models, which can clear the region interior to the 2!:!1 SOR, the crater configuration considered here preserves stable regions in this vicinity, suggesting alternative scenarios for the formation and maintenance of debris structures around irregular minor bodies.

  • 5 authors
·
Oct 4

Stabilizing Temporal Inference Dynamics for Online Surgical Phase Recognition

Online Surgical Phase Recognition (SPR) models can reach high frame-wise accuracy, yet their predictions often lack temporal stability, fragmenting workflow understanding and reducing the reliability of downstream assistance. We show that this instability is not random noise but arises from two mechanisms: early misclassifications corrupt temporal feature states and propagate forward to form error cascades, and phase transitions follow evidence-accumulation dynamics whereas most online SPR systems rely on memoryless frame-wise decisions, making them sensitive to transient confidence fluctuations. We propose a unified Train-Inference-Evaluation framework that explicitly stabilizes temporal inference dynamics using model-agnostic, plug-and-play components. For training, the Temporal Error-Cascade (TEC) loss suppresses error onset and mitigates forward error propagation by stabilizing temporal feature evolution. For inference, the Evidence-Gated Transition Predictor (EGTP) enforces evidence-driven state transitions, allowing phase changes only when accumulated evidence exceeds a confidence boundary. For evaluation, we introduce the Temporal Fragmentation Index (TFI), a reliability-aware metric that quantifies instability-induced temporal disagreement beyond conventional frame-wise and token-based measures. Experiments on Cholec80 and AutoLaparo across three representative backbones show that the proposed framework substantially improves temporal stability and reduces prediction fragmentation, while maintaining or modestly improving frame-wise performance.

Forecasting Thermoacoustic Instabilities in Liquid Propellant Rocket Engines Using Multimodal Bayesian Deep Learning

The 100 MW cryogenic liquid oxygen/hydrogen multi-injector combustor BKD operated by the DLR Institute of Space Propulsion is a research platform that allows the study of thermoacoustic instabilities under realistic conditions, representative of small upper stage rocket engines. We use data from BKD experimental campaigns in which the static chamber pressure and fuel-oxidizer ratio are varied such that the first tangential mode of the combustor is excited under some conditions. We train an autoregressive Bayesian neural network model to forecast the amplitude of the dynamic pressure time series, inputting multiple sensor measurements (injector pressure/ temperature measurements, static chamber pressure, high-frequency dynamic pressure measurements, high-frequency OH* chemiluminescence measurements) and future flow rate control signals. The Bayesian nature of our algorithms allows us to work with a dataset whose size is restricted by the expense of each experimental run, without making overconfident extrapolations. We find that the networks are able to accurately forecast the evolution of the pressure amplitude and anticipate instability events on unseen experimental runs 500 milliseconds in advance. We compare the predictive accuracy of multiple models using different combinations of sensor inputs. We find that the high-frequency dynamic pressure signal is particularly informative. We also use the technique of integrated gradients to interpret the influence of different sensor inputs on the model prediction. The negative log-likelihood of data points in the test dataset indicates that predictive uncertainties are well-characterized by our Bayesian model and simulating a sensor failure event results as expected in a dramatic increase in the epistemic component of the uncertainty.

  • 5 authors
·
Jul 1, 2021

Almost-Linear RNNs Yield Highly Interpretable Symbolic Codes in Dynamical Systems Reconstruction

Dynamical systems (DS) theory is fundamental for many areas of science and engineering. It can provide deep insights into the behavior of systems evolving in time, as typically described by differential or recursive equations. A common approach to facilitate mathematical tractability and interpretability of DS models involves decomposing nonlinear DS into multiple linear DS separated by switching manifolds, i.e. piecewise linear (PWL) systems. PWL models are popular in engineering and a frequent choice in mathematics for analyzing the topological properties of DS. However, hand-crafting such models is tedious and only possible for very low-dimensional scenarios, while inferring them from data usually gives rise to unnecessarily complex representations with very many linear subregions. Here we introduce Almost-Linear Recurrent Neural Networks (AL-RNNs) which automatically and robustly produce most parsimonious PWL representations of DS from time series data, using as few PWL nonlinearities as possible. AL-RNNs can be efficiently trained with any SOTA algorithm for dynamical systems reconstruction (DSR), and naturally give rise to a symbolic encoding of the underlying DS that provably preserves important topological properties. We show that for the Lorenz and R\"ossler systems, AL-RNNs discover, in a purely data-driven way, the known topologically minimal PWL representations of the corresponding chaotic attractors. We further illustrate on two challenging empirical datasets that interpretable symbolic encodings of the dynamics can be achieved, tremendously facilitating mathematical and computational analysis of the underlying systems.

  • 4 authors
·
Oct 18, 2024

SimpleTIR: End-to-End Reinforcement Learning for Multi-Turn Tool-Integrated Reasoning

Large Language Models (LLMs) can significantly improve their reasoning capabilities by interacting with external tools, a paradigm known as Tool-Integrated Reasoning (TIR). However, extending TIR to multi-turn scenarios using Reinforcement Learning (RL) is often hindered by training instability and performance collapse. We identify that such instability is primarily caused by a distributional drift from external tool feedback, leading to the generation of low-probability tokens. This issue compounds over successive turns, causing catastrophic gradient norm explosions that derail the training process. To address this challenge, we introduce SimpleTIR , a plug-and-play algorithm that stabilizes multi-turn TIR training. Its core strategy is to identify and filter out trajectories containing void turns, i.e., turns that yield neither a code block nor a final answer. By removing these problematic trajectories from the policy update, SimpleTIR effectively blocks the harmful, high-magnitude gradients, thus stabilizing the learning dynamics. Extensive experiments show that SimpleTIR achieves state-of-the-art performance on challenging math reasoning benchmarks, notably elevating the AIME24 score from a text-only baseline of 22.1 to 50.5 when starting from the Qwen2.5-7B base model. Furthermore, by avoiding the constraints of supervised fine-tuning, SimpleTIR encourages the model to discover diverse and sophisticated reasoning patterns, such as self-correction and cross-validation.

  • 7 authors
·
Sep 2, 2025 2

JAWS: Enhancing Long-term Rollout of Neural Operators via Spatially-Adaptive Jacobian Regularization

Data-driven surrogate models improve the efficiency of simulating continuous dynamical systems, yet their autoregressive rollouts are often limited by instability and spectral blow-up. While global regularization techniques can enforce contractive dynamics, they uniformly damp high-frequency features, introducing a contraction-dissipation dilemma. Furthermore, long-horizon trajectory optimization methods that explicitly correct drift are bottlenecked by memory constraints. In this work, we propose Jacobian-Adaptive Weighting for Stability (JAWS), a probabilistic regularization strategy designed to mitigate these limitations. By framing operator learning as Maximum A Posteriori (MAP) estimation with spatially heteroscedastic uncertainty, JAWS dynamically modulates the regularization strength based on local physical complexity. This allows the model to enforce contraction in smooth regions to suppress noise, while relaxing constraints near singular features to preserve gradients, effectively realizing a behavior similar to numerical shock-capturing schemes. Experiments demonstrate that this spatially-adaptive prior serves as an effective spectral pre-conditioner, which reduces the base operator's burden of handling high-frequency instabilities. This reduction enables memory-efficient, short-horizon trajectory optimization to match or exceed the long-term accuracy of long-horizon baselines. Evaluated on the 1D viscous Burgers' equation, our hybrid approach improves long-term stability, shock fidelity, and out-of-distribution generalization while reducing training computational costs.

  • 2 authors
·
Mar 4

Solving robust MDPs as a sequence of static RL problems

Designing control policies whose performance level is guaranteed to remain above a given threshold in a span of environments is a critical feature for the adoption of reinforcement learning (RL) in real-world applications. The search for such robust policies is a notoriously difficult problem, related to the so-called dynamic model of transition function uncertainty, where the environment dynamics are allowed to change at each time step. But in practical cases, one is rather interested in robustness to a span of static transition models throughout interaction episodes. The static model is known to be harder to solve than the dynamic one, and seminal algorithms, such as robust value iteration, as well as most recent works on deep robust RL, build upon the dynamic model. In this work, we propose to revisit the static model. We suggest an analysis of why solving the static model under some mild hypotheses is a reasonable endeavor, based on an equivalence with the dynamic model, and formalize the general intuition that robust MDPs can be solved by tackling a series of static problems. We introduce a generic meta-algorithm called IWOCS, which incrementally identifies worst-case transition models so as to guide the search for a robust policy. Discussion on IWOCS sheds light on new ways to decouple policy optimization and adversarial transition functions and opens new perspectives for analysis. We derive a deep RL version of IWOCS and demonstrate it is competitive with state-of-the-art algorithms on classical benchmarks.

  • 3 authors
·
Oct 8, 2024

Explanation of Dynamic Physical Field Predictions using WassersteinGrad: Application to Autoregressive Weather Forecasting

As the demand to integrate Artificial Intelligence into high-stakes environments continues to grow, explaining the reasoning behind neural-network predictions has shifted from a theoretical curiosity to a strict operational requirement. Our work is motivated by the explanations of autoregressive neural predictions on dynamic physical fields, as in weather forecasting. Gradient-based feature attribution methods are widely used to explain the predictions on such data, in particular due to their scalability to high-dimensional inputs. It is also interesting to remark that gradient-based techniques such as SmoothGrad are now standard on images to robustify the explanations using pointwise averages of the attribution maps obtained from several noised inputs. Our goal is to efficiently adapt this aggregation strategy to dynamic physical fields. To do so, our first contribution is to identify a fundamental failure mode when averaging perturbed attribution maps on dynamic physical fields: stochastic input perturbations do not induce stationary amplitude noise in attribution maps, but instead cause a geometric displacement of the attributions. Consequently, pointwise averaging blurs these spatially misaligned features. To tackle this issue, we introduce WassersteinGrad, which extracts a geometric consensus of perturbed attribution maps by computing their entropic Wasserstein barycenter. The results, obtained on regional weather data and a meteorologist-validated neural model, demonstrate promising explainability properties of WassersteinGrad over gradient-based baselines across both single-step and autoregressive forecasting settings.

  • 4 authors
·
Apr 23

Nonlinear dynamics of a chemically-active drop: from steady to chaotic self-propulsion

Individual chemically active drops suspended in a surfactant solution were observed to self-propel spontaneously with straight, helical, or chaotic trajectories. To elucidate how these drops can exhibit such strikingly different dynamics and `decide' what to do, we propose a minimal axisymmetric model of a spherical active drop, and show that simple and linear interface properties can lead to both steady self-propulsion of the droplet as well as chaotic behavior. The model includes two different mobility mechanisms, namely, diffusiophoresis and the Marangoni effect, that convert self-generated gradients of surfactant concentration into the flow at the droplet surface. In turn, surface-driven flow initiates surfactant advection that is the only nonlinear mechanism and, thus, the only source of dynamical complexity in our model. Numerical investigation of the fully-coupled hydrodynamic and advection diffusion problems reveals that strong advection (e.g., large droplet size) may destabilize a steadily self-propelling drop; once destabilized, the droplet spontaneously stops and a symmetric extensile flow emerges. If advection is strengthened even further in comparison with molecular diffusion, the droplet may perform chaotic oscillations. Our results indicate that the thresholds of these instabilities depend heavily on the balance between diffusiophoresis and the Marangoni effect. Using linear stability analysis, we demonstrate that diffusiophoresis promotes the onset of high-order modes of monotonic instability of the motionless drop. We argue that diffusiophoresis has a similar effect on the instabilities of a moving drop.

  • 2 authors
·
Jan 8, 2019

Curl Descent: Non-Gradient Learning Dynamics with Sign-Diverse Plasticity

Gradient-based algorithms are a cornerstone of artificial neural network training, yet it remains unclear whether biological neural networks use similar gradient-based strategies during learning. Experiments often discover a diversity of synaptic plasticity rules, but whether these amount to an approximation to gradient descent is unclear. Here we investigate a previously overlooked possibility: that learning dynamics may include fundamentally non-gradient "curl"-like components while still being able to effectively optimize a loss function. Curl terms naturally emerge in networks with inhibitory-excitatory connectivity or Hebbian/anti-Hebbian plasticity, resulting in learning dynamics that cannot be framed as gradient descent on any objective. To investigate the impact of these curl terms, we analyze feedforward networks within an analytically tractable student-teacher framework, systematically introducing non-gradient dynamics through neurons exhibiting rule-flipped plasticity. Small curl terms preserve the stability of the original solution manifold, resulting in learning dynamics similar to gradient descent. Beyond a critical value, strong curl terms destabilize the solution manifold. Depending on the network architecture, this loss of stability can lead to chaotic learning dynamics that destroy performance. In other cases, the curl terms can counterintuitively speed learning compared to gradient descent by allowing the weight dynamics to escape saddles by temporarily ascending the loss. Our results identify specific architectures capable of supporting robust learning via diverse learning rules, providing an important counterpoint to normative theories of gradient-based learning in neural networks.

  • 3 authors
·
Oct 3, 2025

From Syntax to Semantics: Geometric Stability as the Missing Axis of Perturbation Biology

The capacity to precisely edit genomes has outpaced our ability to predict the consequences. A cell can be genetically perfect and therapeutically useless: edited exactly as intended, yet unstable, drifting toward unintended fates, or selected for properties that compromise safety. This paradox reflects a deeper gap in how we evaluate biological intervention. Current frameworks excel at measuring what was done to a cell but remain blind to what the cell has become. We argue that this blindness stems from treating cells as collections of independent variables rather than as dynamical systems occupying positions on high-dimensional state manifolds. Drawing on Waddington's epigenetic landscape, we propose geometric stability as a missing axis of evaluation: the directional coherence of cellular responses to perturbation. This metric distinguishes interventions that guide cells coherently toward stable states from those that scatter them across the state manifold. Validation across diverse perturbation datasets reveals that geometric stability captures regulatory architecture invisible to conventional metrics, discriminating pleiotropic master regulators from lineage-specific factors without prior biological annotation. As precision medicine increasingly relies on cellular reprogramming, the question shifts from ``did the intervention occur?'' to ``is the resulting state stable?'' Geometric stability provides a framework for answering.

  • 1 authors
·
Apr 24

Normal-Field Evolution and the Breakdown of Classical Tearing in Current Sheets

Classical resistive tearing theory assumes a prescribed current-sheet equilibrium, but a finite normal magnetic field can evolve the background on the tearing timescale. For a transversely pressure-balanced Harris profile of initial half-thickness a and asymptotic reconnecting-field magnitude B_0, threaded by uniform B_n (ξ=B_n/B_0), we derive an exact evolution in ideal magnetohydrodynamics: counter-propagating Alfvenic fronts broaden the neutral layer and generate a central sheet-parallel flow with shear at its flanks. Inner-layer estimates recover ξ_{crit}sim S^{-3/4} for breakdown of the classical resistive balance, where S is the Lundquist number based on a. Numerical frozen-profile calculations show loss of central resistive dominance and decreasing tearing growth as the neutral layer expands. Eigenfunction comparisons at fixed wavenumber and predominantly Doppler-shifted propagation support a normal-field-modified continuation of classical tearing. The normal field supplies no net perturbation energy. Energy extraction from the reconnecting-field gradient weakens as the sheet broadens. The velocity-gradient contribution becomes comparable when the neutral-layer width approaches the initial sheet thickness, without reversing the decline in growth. For S=10^6, Pr_m=0, and ξ=10^{-4}, the maximum growth rate falls by a factor of about ten from its initial value at neutral-layer half-width wsimeq1.59a, where the growth and broadening times become equal. Only about 0.18 additional upper-envelope e-folds are estimated between this crossing and w/a=2, where the growth rate is about 25 times smaller than its initial value. These results support dynamical suppression of further linear amplification over the sampled evolution, even though the instantaneous spectrum remains unstable.

  • 2 authors
·
Sep 29

Real-Time Structural Deflection Estimation in Hydraulically Actuated Systems Using 3D Flexible Multibody Simulation and DNNs

The precision, stability, and performance of lightweight high-strength steel structures in heavy machinery is affected by their highly nonlinear dynamics. This, in turn, makes control more difficult, simulation more computationally intensive, and achieving real-time autonomy, using standard approaches, impossible. Machine learning through data-driven, physics-informed and physics-inspired networks, however, promises more computationally efficient and accurate solutions to nonlinear dynamic problems. This study proposes a novel framework that has been developed to estimate real-time structural deflection in hydraulically actuated three-dimensional systems. It is based on SLIDE, a machine-learning-based method to estimate dynamic responses of mechanical systems subjected to forced excitations.~Further, an algorithm is introduced for the data acquisition from a hydraulically actuated system using randomized initial configurations and hydraulic pressures.~The new framework was tested on a hydraulically actuated flexible boom with various sensor combinations and lifting various payloads. The neural network was successfully trained in less time using standard parameters from PyTorch, ADAM optimizer, the various sensor inputs, and minimal output data. The SLIDE-trained neural network accelerated deflection estimation solutions by a factor of 10^7 in reference to flexible multibody simulation batches and provided reasonable accuracy. These results support the studies goal of providing robust, real-time solutions for control, robotic manipulators, structural health monitoring, and automation problems.

  • 6 authors
·
Mar 10, 2025

Dynamic Modeling and Vibration Analysis of Large Deployable Mesh Reflectors

Large deployable mesh reflectors are essential for space applications, providing precise reflecting surfaces for high-gain antennas used in satellite communications, Earth observation, and deep-space missions. During on-orbit missions, active shape adjustment and attitude control are crucial for maintaining surface accuracy and proper orientation for these reflectors, ensuring optimal performance. Preventing resonance through thorough dynamic modeling and vibration analysis is vital to avoid structural damage and ensure stability and reliability. Existing dynamic modeling approaches, such as wave and finite element methods, often fail to accurately predict dynamic responses due to the limited capability of handling three-dimensional reflectors or the oversimplification of cable members of a reflector. This paper proposes the Cartesian spatial discretization method for dynamic modeling and vibration analysis of cable-network structures in large deployable mesh reflectors. This method defines cable member positions as a summation of internal and boundary-induced terms within a global Cartesian coordinate system. Numerical simulation on a two-dimensional cable-network structure and a center-feed mesh reflector demonstrates the superiority of the proposed method over traditional approaches, highlighting its accuracy and versatility, and establishing it as a robust tool for analyzing three-dimensional complex reflector configurations.

  • 5 authors
·
Oct 23, 2024

Metronome: Bound the Cache, Keep the Beat for Real-Time Interaction Model Serving

Real-time interaction models -- Moshi, MiniCPM-o, Qwen-Omni -- turn serving into a periodic real-time task: on every frame a session ingests streaming audio and must respond by a recurring wall-clock deadline, while its KV cache grows monotonically and stays pinned for the whole conversation. This regime hides a dangerous failure mode. On a real full-duplex stack, sustained load does not degrade serving gracefully: it falls off a cliff, jumping in one step from milliseconds per frame to a stalled engine when accumulated session state exhausts the KV pool. The collapse is metastable -- identical five-minute runs collapse or survive on run-to-run variance -- and silent: latency and deadline-miss metrics read healthy throughout. We show one move restores both stability and observability: bound each session's resident state, and latency starts telling the truth. Metronome's in-engine KV window eliminates the collapse (0/20 vs. 14/20 runs across two batches) and turns per-frame latency into a monotone load signal, on which an online admission controller discovers the schedulable concurrency; without the window, the identical controller over-admits into the wall. A first-order model predicts the collapse time within a few percent on the headline model, and a quality probe validates the bound's design by ablation: the window alone is quality-free in turn-based decoding, and its few pinned attention-sink tokens are what keep free-running generation healthy. Everything is measured end-to-end on real audio, across four interaction models on one GPU.

  • 2 authors
·
Jul 1

Emergent Transfer of a Physics Foundation Model from Simulation to Laboratory Turbulence

Whether physics foundation models can be usefully deployed on laboratory experiments remains an open question for scientific machine learning (ML). We test this question on the Rayleigh-Taylor instability (RTI), a ubiquitous and demanding fluid instability seen from tabletop flows to supernova explosions, in which small perturbations at a density interface grow into chaotic, multiscale mixing as a lighter fluid accelerates into a heavier one. Standard ML models struggle with RTI, and despite over a century of theoretical, numerical, and experimental work, it carries an unresolved discrepancy between simulation and experiment: the late-time mixing growth rate, α, measured in most laboratory experiments (sim 0.06-0.07), is roughly three times the value from idealized direct numerical simulations (DNS, sim 0.02). The gap's origin remains debated. These properties make RTI a stringent test for a question that matters well beyond RTI: can foundation models trained only on simulations generalise to sparse, messy, and noisy laboratory settings? We finetune Walrus, a foundation model for continuum dynamics, on three or fewer DNS realizations and recover key RTI physics over long rollouts. Applied zero-shot to sliding-barrier laboratory data, the finetuned model leaves the DNS-like regime and enters the observed growth band, having never seen a single experimental sample. These results provide independent, data-driven evidence that initial conditions play a crucial role in the longstanding sim-experiment gap in α. The model also generalises zero-shot to stable stratification, a buoyancy regime absent from training, correctly slowing mixing-layer growth. Together, our results show that foundation models can generalise well beyond their training data, predicting laboratory behavior and unseen physical regimes, opening new ways to probe longstanding simulation-experiment gaps.

polymathic-ai Polymathic AI
·
May 30

Unstable Features, Reproducible Subspaces: Understanding Seed Dependence in Sparse Autoencoders

Sparse autoencoders (SAEs) are widely used to interpret neural network representations, but their utility depends on whether the learned features are reproducible across training runs. We study this question through feature stability: for each SAE feature, we estimate the probability that a similar feature reappears in an independently trained SAE. This yields a scalable per-feature signal that separates stable from unstable features. In a large-scale study across seeds, models, layers, dictionary sizes, and SAE variants, we find a pronounced functional asymmetry: stable features carry most of the reconstruction- and prediction-relevant signal, while unstable features have weak marginal impact and are dominated by low-frequency surface-form triggers in both activation statistics and automatic explanations. Geometrically, unstable features are individually non-reproducible but concentrate in reproducible lower-rank subspaces, suggesting that seed dependence often reflects basis ambiguity within a shared region of activation space rather than pure noise. A controlled synthetic model makes this mechanism explicit, showing that low-rank ground-truth features can be recovered at the subspace level while remaining non-identifiable as individual SAE latents across seeds. Finally, by pooling unique cross-seed features, we construct more stable SAEs while preserving explained variance in this setting. Together, these results show that unstable features are not merely failed or noisy latents: they have weak individual functional impact, but reflect reproducible low-dimensional structure that standard SAEs resolve differently across seeds.

t-tech T-Tech
·
Jun 9 2

Parcae: Scaling Laws For Stable Looped Language Models

Traditional fixed-depth architectures scale quality by increasing training FLOPs, typically through increased parameterization, at the expense of a higher memory footprint, or data. A potential alternative is looped architectures, which instead increase FLOPs by sending activations through a block of layers in a loop. While promising, existing recipes for training looped architectures can be unstable, suffering from residual explosion and loss spikes. We address these challenges by recasting looping as a nonlinear time-variant dynamical system over the residual stream. Via a linear approximation to this system, we find that instability occurs in existing looped architectures as a result of large spectral norms in their injection parameters. To address these instability issues, we propose Parcae, a novel stable, looped architecture that constrains the spectral norm of the injection parameters via discretization of a negative diagonal parameterization. As a result, Parcae achieves up to 6.3% lower validation perplexity over prior large-scale looped models. Using our stable looped architecture, we investigate the scaling properties of looping as a medium to improve quality by increasing FLOPs in training and test-time. For training, we derive predictable power laws to scale FLOPs while keeping parameter count fixed. Our initial scaling laws suggest that looping and data should be increased in tandem, given a fixed FLOP budget. At test-time, we find that Parcae can use looping to scale compute, following a predictable, saturating exponential decay. When scaled up to 1.3B parameters, we find that Parcae improves CORE and Core-Extended quality by 2.99 and 1.18 points when compared to strong Transformer baselines under a fixed parameter and data budget, achieving a relative quality of up to 87.5% a Transformer twice the size.

Shape it Up! Restoring LLM Safety during Finetuning

Finetuning large language models (LLMs) enables user-specific customization but introduces critical safety risks: even a few harmful examples can compromise safety alignment. A common mitigation strategy is to update the model more strongly on examples deemed safe, while downweighting or excluding those flagged as unsafe. However, because safety context can shift within a single example, updating the model equally on both harmful and harmless parts of a response is suboptimal-a coarse treatment we term static safety shaping. In contrast, we propose dynamic safety shaping (DSS), a framework that uses fine-grained safety signals to reinforce learning from safe segments of a response while suppressing unsafe content. To enable such fine-grained control during finetuning, we introduce a key insight: guardrail models, traditionally used for filtering, can be repurposed to evaluate partial responses, tracking how safety risk evolves throughout the response, segment by segment. This leads to the Safety Trajectory Assessment of Response (STAR), a token-level signal that enables shaping to operate dynamically over the training sequence. Building on this, we present STAR-DSS, guided by STAR scores, that robustly mitigates finetuning risks and delivers substantial safety improvements across diverse threats, datasets, and model families-all without compromising capability on intended tasks. We encourage future safety research to build on dynamic shaping principles for stronger mitigation against evolving finetuning risks.

  • 5 authors
·
May 22, 2025

When Self-Reference Fails to Close: Matrix-Level Dynamics in Large Language Models

We investigate how self-referential inputs alter the internal matrix dynamics of large language models. Measuring 106 scalar metrics across up to 7 analysis passes on four models from three architecture families -- Qwen3-VL-8B, Llama-3.2-11B, Llama-3.3-70B, and Gemma-2-9B -- over 300 prompts in a 14-level hierarchy at three temperatures (T in {0.0, 0.3, 0.7}), we find that self-reference alone is not destabilizing: grounded self-referential statements and meta-cognitive prompts are markedly more stable than paradoxical self-reference on key collapse-related metrics, and on several such metrics can be as stable as factual controls. Instability concentrates in prompts inducing non-closing truth recursion (NCTR) -- truth-value computations with no finite-depth resolution. NCTR prompts produce anomalously elevated attention effective rank -- indicating attention reorganization with global dispersion rather than simple concentration collapse -- and key metrics reach Cohen's d = 3.14 (attention effective rank) to 3.52 (variance kurtosis) vs. stable self-reference in the 70B model; 281/397 metric-model combinations differentiate NCTR from stable self-reference after FDR correction (q < 0.05), 198 with |d| > 0.8. Per-layer SVD confirms disruption at every sampled layer (d > +1.0 in all three models analyzed), ruling out aggregation artifacts. A classifier achieves AUC 0.81-0.90; 30 minimal pairs yield 42/387 significant combinations; 43/106 metrics replicate across all four models. We connect these observations to three classical matrix-semigroup problems and propose, as a conjecture, that NCTR forces finite-depth transformers toward dynamical regimes where these problems concentrate. NCTR prompts also produce elevated contradictory output (+34-56 percentage points vs. controls), suggesting practical relevance for understanding self-referential failure modes.

  • 1 authors
·
Apr 12

Analysis of grid instabilities in particle-in-cell codes based on a meshfree approach

A new method of analyzing grid, or aliasing, instabilities is described, in particle-in-cell (PIC) codes for plasma kinetic theory. It starts with a meshfree approach with N_{p} macroparticles, with N_{p}<infty. Linearization of these equations is done about a uniform density non-drifting equilibrium prescribed by macroparticles on a uniform lattice. Macroparticle positions perturbations are induced about this lattice. The resulting linear equations are analyzed for stability and dispersion relations. The linearized equations are then discretized on a grid of N_{g} points with N_{g} le N_{p}, in both momentum conserving (MCP) and energy conserving (ECP) formulations. For a cold stationary plasma, this leads a dynamical matrix. For ECP, the matrix is symmetric and positive definite (SPD) and immediately shows stability. For MCP, the dynamical matrix is neither symmetric nor positive definite, preventing immediate conclusions on stability. For both MCP and ECP and for a cold stationary plasma, the resulting matrix elements vary relative to the meshfree value, a result of aliasing. This deviation is periodic in the displacement of the particle lattice relative to the grid. In the MCP discretization, eigenvalues occur in complex conjugate pairs for general placement of the particle lattice relative to the grid. These conjugate pairs indicate nonnegative growth rates. The nature of the aliasing is studied and shown to be related to the trapezoidal rule error over the grid. The scaling of the linear growth rates with respect to N_{g} and especially with respect to N_{ppc} is studied. These analytical results are compared with PIC simulations and found to be in excellent agreement. The connection with a cold drifting beam is discussed briefly, specifically, grid-induced instabilities for both the MCP and ECP.

  • 2 authors
·
Sep 30

WDL-OPD: Weak-Driven On-Policy Distillation via Mixture-Constrained Co-Training

On-policy distillation (OPD) aligns a student with a teacher on trajectories sampled from the student itself, reducing the train-test state mismatch of offline distillation. The same feedback loop can nevertheless be unstable: each update changes both the policy and the states on which the next update is computed. We introduce WDL-OPD, a mixture-constrained co-training method with two trainable policies. An anchor policy generates every rollout, an auxiliary policy evaluates the same visited states, and a geometric mixture of their token distributions is matched to a frozen teacher by reverse KL. Both policies receive gradient. We show that freezing the auxiliary recovers an anchor-plus-contrast proxy target closely related to OPD^2 and W2S-OPD, whereas joint training creates branch-level degrees of freedom that a static delta cannot express. In recorded Qwen3 experiments at 1.7B and 4B scale, WDL-OPD produces the strongest student checkpoint in each of four scale-domain settings. It raises MATH500 accuracy from 0.630 to 0.685 at 4B and from 0.521 to 0.585 at 1.7B. In code generation, seven single-policy OPD configurations exhibit entropy growth or trajectory degradation, while co-training reaches independently re-evaluated development scores of 0.637 and 0.375. Because several comparisons differ in curriculum or initialization, these results support a stabilization hypothesis rather than a universal causal claim. We provide the exact training algorithm, failure evidence, and the controlled comparison matrix needed to test that hypothesis.

  • 12 authors
·
Sep 2

On the Dynamics of Acceleration in First order Gradient Methods

Ever since the original algorithm by Nesterov (1983), the true nature of the acceleration phenomenon has remained elusive, with various interpretations of why the method is actually faster. The diagnosis of the algorithm through the lens of Ordinary Differential Equations (ODEs) and the corresponding dynamical system formulation to explain the underlying dynamics has a rich history. In the literature, the ODEs that explain algorithms are typically derived by considering the limiting case of the algorithm maps themselves, that is, an ODE formulation follows the development of an algorithm. This obfuscates the underlying higher order principles and thus provides little evidence of the working of the algorithm. Such has been the case with Nesterov algorithm and the various analogies used to describe the acceleration phenomena, viz, momentum associated with the rolling of a Heavy-Ball down a slope, Hessian damping etc. The main focus of our work is to ideate the genesis of the Nesterov algorithm from the viewpoint of dynamical systems leading to demystifying the mathematical rigour behind the algorithm. Instead of reverse engineering ODEs from discrete algorithms, this work explores tools from the recently developed control paradigm titled Passivity and Immersion approach and the Geometric Singular Perturbation theory which are applied to arrive at the formulation of a dynamical system that explains and models the acceleration phenomena. This perspective helps to gain insights into the various terms present and the sequence of steps used in Nesterovs accelerated algorithm for the smooth strongly convex and the convex case. The framework can also be extended to derive the acceleration achieved using the triple momentum method and provides justifications for the non-convergence to the optimal solution in the Heavy-Ball method.

  • 5 authors
·
Sep 22, 2025