Daily Papers

4-bit quantization significantly reduces the memory footprint and accelerates the inference of large language models (LLMs). However, its limited bit-width representation struggles to faithfully capture both dense common values (inliers) and rare large-magnitude values (outliers), causing substantial accuracy degradation. Existing mixed-precision methods mitigate this by retaining outliers in high precision, but at the cost of breaking the uniformity of low-bit execution, introducing precision conversion and extra data movement that undermine practical speedup. We propose MosaicQuant, a unified 4-bit LLM quantization paradigm built on a novel principle of inlier--outlier disaggregation. Rather than elevating outlier precision, MosaicQuant quantizes the full weight matrix into a dense 4-bit base component, where inliers are captured faithfully while outlier are inevitably quantized. A sparse 4-bit residual component is then introduced to compensate for these quantization errors, selectively targeting the most error-critical weight blocks where output distortion is shown to be concentrated. However, a unified representation alone is insufficient, as naïvely executing the sparse residual as a separate kernel still breaks the unified low-bit inference pipeline. To bridge this gap, we introduce ZipperEngine, which fuses sparse block computation into the dense 4-bit GEMM kernel via an overlapped pipeline, unifying not only the representation but also the execution into a single coherent low-bit inference pipeline. Extensive experiments on LLaMA3 and Qwen3 demonstrate that MosaicQuant preserves near-FP16 accuracy while achieving up to 1.24times speedup over the W16A16 baseline.

We compare two strategies for compressing the KV cache in transformer inference: rank reduction (discard dimensions) and quantization (keep all dimensions, reduce precision). At matched storage budgets across five models (124M-14B, MHA and GQA), we find that quantization consistently outperforms rank reduction by 4-364 PPL depending on model and compression level. The gap persists even when rank reduction is combined with quantization in hybrid baselines, and it grows with GQA aggressiveness. On LAMBADA, INT4 matches FP16 accuracy (+0.23 PPL on Mistral 7B, +0.58 on GPT-2) while rank-32 at identical storage collapses to 0.4%. We trace this gap to a structural asymmetry: under softmax attention routing, removing a dimension can flip which token is attended (a discrete failure), while quantization noise is bounded and typically preserves score ordering. We formalize this via a perturbation result showing projection damage exceeds quantization damage by 3 x 2^(2b) per direction under the softmax Fisher metric. A basis ablation confirms the finding is basis-independent (spread <0.4 PPL), establishing that the advantage comes from preserving dimensions, not from a better coordinate system. Joint K+V INT4 quantization achieves 75% total KV reduction at only +0.18 PPL on Mistral 7B.

Large Language Models (LLMs) demonstrate exceptional performance but entail significant memory and computational costs, restricting their practical deployment. While existing INT4/INT8 quantization reduces these costs, they often degrade accuracy or lack optimal efficiency. INT6 quantization offers a superior trade-off between model accuracy and inference efficiency, but lacks hardware support in modern GPUs, forcing emulation via higher-precision arithmetic units that limit acceleration. In this paper, we propose FlexQ, a novel post-training INT6 quantization framework combining algorithmic innovation with system-level optimizations. FlexQ employs uniform 6-bit weight quantization across all layers, with adaptive retention of 8-bit activations in layers identified through layer-wise sensitivity analysis. To maximize hardware efficiency, we develop a specialized high-performance GPU kernel supporting matrix multiplication for W6A6 and W6A8 representations via Binary Tensor Core (BTC) equivalents, effectively bypassing the lack of native INT6 tensor cores. Evaluations on LLaMA models show FlexQ maintains near-FP16 accuracy, with perplexity increases of no more than 0.05. The proposed kernel achieves an average 1.39times speedup over ABQ-LLM on LLaMA-2-70B linear layers. End-to-end, FlexQ delivers 1.33times inference acceleration and 1.21times memory savings over SmoothQuant. Code is released at https://github.com/FlyFoxPlayer/FlexQ.

Although LLM inference has emerged as a critical workload for many downstream applications, efficiently inferring LLMs is challenging due to the substantial memory footprint and bandwidth requirements. In parallel, compute capabilities have steadily outpaced both memory capacity and bandwidth over the last few decades, a trend that remains evident in modern GPU hardware and exacerbates the challenge of LLM inference. As such, new algorithms are emerging that trade increased computation for reduced memory operations. To that end, we present XQuant, which takes advantage of this trend, enabling an order-of-magnitude reduction in memory consumption through low-bit quantization with substantial accuracy benefits relative to state-of-the-art KV cache quantization methods. We accomplish this by quantizing and caching the layer input activations X, instead of using standard KV caching, and then rematerializing the Keys and Values on-the-fly during inference. This results in an immediate 2times memory savings compared to KV caching. By applying XQuant, we achieve up to sim 7.7times memory savings with <0.1 perplexity degradation compared to the FP16 baseline. Furthermore, our approach leverages the fact that X values are similar across layers. Building on this observation, we introduce XQuant-CL, which exploits the cross-layer similarity in the X embeddings for extreme compression. Across different models, XQuant-CL attains up to 10times memory savings relative to the FP16 baseline with only 0.01 perplexity degradation, and 12.5times memory savings with only 0.1 perplexity degradation. XQuant exploits the rapidly increasing compute capabilities of hardware platforms to eliminate the memory bottleneck, while surpassing state-of-the-art KV cache quantization methods and achieving near-FP16 accuracy across a wide range of models.

Low-bit floating-point formats and semi-structured sparsity are increasingly supported by modern accelerators, yet combining them for LLM activation compression remains challenging: activations contain input-dependent outliers that dominate block scales in FP4 quantization, and directly applying N:M sparsity masks discards moderate values, coupling sparsification loss with quantization error. We introduce SharQ, a training-free inference method that bridges activation sparsity and FP4 quantization through an online sparse--dense decomposition. For each activation tensor, SharQ generates an input-adaptive N:M mask to extract an outlier-dominated sparse backbone, quantizes it to FP4, and defines a dense residual relative to the quantized sparse backbone rather than the unquantized sparse values. A sparse FP4 GEMM processes the backbone while a dense FP4 GEMM compensates for both mask-induced activation loss and sparse-path quantization error. The two paths share a single FP4 weight payload with path-specific scale views, and a fused preparation kernel absorbs mask generation, residual construction, and layer normalization into one operator. SharQ requires no calibration data, retraining, or model-specific tuning. Evaluated on Llama-3.1-8B, Qwen2.5-7B, Qwen3-30B-A3B, and Qwen3-VL-8B, SharQ recovers 43--63% of the NVFP4-to-FP16 accuracy gap across language and vision-language tasks, and generalizes across NVFP4, HiF4, and MXFP4 formats. On an RTX 5090, SharQ delivers 2.2--2.4times latency reduction over FP16 and 1.2--1.4times throughput improvement over FP8 in language model serving, and up to 1.58times speedup on Wan2.2-T2V-A14B video generation when combined with SageAttention. Our code is available at https://github.com/actypedef/SharQ.

Huawei's openPangu-Embedded-1B and openPangu-Embedded-7B are variants of the openPangu large language model, designed for efficient deployment on Ascend NPUs. The 7B variant supports three distinct Chain-of-Thought (CoT) reasoning paradigms, namely slow_think, auto_think, and no_think, while the 1B variant operates exclusively in the no_think mode, which employs condensed reasoning for higher efficiency. Although CoT reasoning enhances capability, the generation of extended reasoning traces introduces substantial memory and latency overheads, posing challenges for practical deployment on Ascend NPUs. This paper addresses these computational constraints by leveraging low-bit quantization, which transforms FP16 computations into more efficient integer arithmetic. We introduce a unified low-bit inference framework, supporting INT8 (W8A8) and W4A8 quantization, specifically optimized for openPangu-Embedded models on the Atlas A2. Our comprehensive evaluation on code generation benchmarks (HumanEval and MBPP) demonstrates the efficacy of this approach. INT8 quantization consistently preserves over 90\% of the FP16 baseline accuracy and achieves a 1.5x prefill speedup on the Atlas A2. Furthermore, W4A8 quantization significantly reduces memory consumption, albeit with a moderate trade-off in accuracy. These findings collectively indicate that low-bit quantization effectively facilitates efficient CoT reasoning on Ascend NPUs, maintaining high model fidelity.

Quantization emerges as one of the most promising compression technologies for deploying efficient large models for various real time application in recent years. Considering that the storage and IO of weights take up the vast majority of the overhead inside a large model, weight only quantization can lead to large gains. However, existing quantization schemes suffer from significant accuracy degradation at very low bits, or require some additional computational overhead when deployed, making it difficult to be applied to large-scale applications in industry. In this paper, we propose decoupleQ, achieving a substantial increase in model accuracy, especially at very low bits. decoupleQ abandons the traditional heuristic quantization paradigm and decouples the model parameters into integer and floating-point parts, thus transforming the quantization problem into a traditional mathematical optimization problem with constraints, which is then solved alternatively by off-the-shelf optimization methods. Quantization via decoupleQ is linear and uniform, making it hardware-friendlier than non-uniform counterpart, and enabling the idea to be migrated to high-bit quantization to enhance its robustness. Our method has achieved well on-line accuracy near fp16/bf16 on the 2-bit quantization of large speech models in ByteDance. The code is available at https://github.com/bytedance/decoupleQ

Lower numerical precision reduces storage and memory traffic but raises the perturbation floor. We study rank compensation: reinvesting saved memory in a larger approximation rank. For matrices, the singular-value error identity yields a directly testable sufficient condition requiring the additional singular component to offset the perturbation from storing the rank-augmented approximation in lower precision. On ten SuiteSparse matrices, all 100 truncation-dominated configurations (50 FP32 and 50 FP16) are certified non-increases and strict accuracy wins, with mean error ratio 0.963 and storage ratios 58.8% and 29.4% relative to the FP64 baseline. FP16 failures occur only in tail-rank stress tests near the perturbation floor. At the largest resident matrix-application batch, compensated FP32 and FP16 achieve geometric-mean A100 speedups of 1.28times and 2.12times; neither accelerates the smallest batch. For Tensor-Train (TT) approximation, we give a conditional a posteriori extension based on the measured truncation gain and rounded-core perturbation. Across three-way and six-way synthetic tests, FP32 and FP16 achieve combined accuracy-memory wins in 10 of 20 and 14 of 20 trials. On public hyperspectral tensors and FROSTT top-active subtensors, the corresponding counts are 44 of 60 and 54 of 60; four FP16 Salinas-A tail-stress cases fail. No certified TT case exceeds the FP64 error beyond numerical tolerance. Reconstruction of six public tensors yields geometric-mean compensated speedups of 1.38times (FP32) and 1.94times (FP16). Timings cover resident downstream kernels, not factorization, transfers, or end-to-end acceleration.

Pretraining transformers are generally time-consuming. Fully quantized training (FQT) is a promising approach to speed up pretraining. However, most FQT methods adopt a quantize-compute-dequantize procedure, which often leads to suboptimal speedup and significant performance degradation when used in transformers due to the high memory access overheads and low-precision computations. In this work, we propose Jetfire, an efficient and accurate INT8 training method specific to transformers. Our method features an INT8 data flow to optimize memory access and a per-block quantization method to maintain the accuracy of pretrained transformers. Extensive experiments demonstrate that our INT8 FQT method achieves comparable accuracy to the FP16 training baseline and outperforms the existing INT8 training works for transformers. Moreover, for a standard transformer block, our method offers an end-to-end training speedup of 1.42x and a 1.49x memory reduction compared to the FP16 baseline.

Reinforcement learning (RL) fine-tuning of large language models (LLMs) often suffers from instability due to the numerical mismatch between the training and inference policies. While prior work has attempted to mitigate this issue through algorithmic corrections or engineering alignments, we show that its root cause lies in the floating point precision itself. The widely adopted BF16, despite its large dynamic range, introduces large rounding errors that breaks the consistency between training and inference. In this work, we demonstrate that simply reverting to FP16 effectively eliminates this mismatch. The change is simple, fully supported by modern frameworks with only a few lines of code change, and requires no modification to the model architecture or learning algorithm. Our results suggest that using FP16 uniformly yields more stable optimization, faster convergence, and stronger performance across diverse tasks, algorithms and frameworks. We hope these findings motivate a broader reconsideration of precision trade-offs in RL fine-tuning.

The massive computational costs associated with large language model (LLM) pretraining have spurred great interest in reduced-precision floating-point representations to accelerate the process. As a result, the BrainFloat16 (BF16) precision has become the de facto standard for LLM training, with hardware support included in recent accelerators. This trend has gone even further in the latest processors, where FP8 has recently been introduced. However, prior experience with FP16, which was found to be less stable than BF16, raises concerns as to whether FP8, with even fewer bits than FP16, can be a cost-effective option for LLM training. We argue that reduced-precision training schemes must have similar training stability and hyperparameter sensitivities to their higher-precision counterparts in order to be cost-effective. However, we find that currently available methods for FP8 training are not robust enough to allow their use as economical replacements. This prompts us to investigate the stability of reduced-precision LLM training in terms of robustness across random seeds and learning rates. To this end, we propose new evaluation techniques and a new metric for quantifying loss landscape sharpness in autoregressive language models. By simulating incremental bit reductions in floating-point representations, we analyze the relationship between representational power and training stability with the intent of aiding future research into the field.

State-of-the-art generic low-precision training algorithms use a mix of 16-bit and 32-bit precision, creating the folklore that 16-bit hardware compute units alone are not enough to maximize model accuracy. As a result, deep learning accelerators are forced to support both 16-bit and 32-bit floating-point units (FPUs), which is more costly than only using 16-bit FPUs for hardware design. We ask: can we train deep learning models only with 16-bit floating-point units, while still matching the model accuracy attained by 32-bit training? Towards this end, we study 16-bit-FPU training on the widely adopted BFloat16 unit. While these units conventionally use nearest rounding to cast output to 16-bit precision, we show that nearest rounding for model weight updates often cancels small updates, which degrades the convergence and model accuracy. Motivated by this, we study two simple techniques well-established in numerical analysis, stochastic rounding and Kahan summation, to remedy the model accuracy degradation in 16-bit-FPU training. We demonstrate that these two techniques can enable up to 7% absolute validation accuracy gain in 16-bit-FPU training. This leads to 0.1% lower to 0.2% higher validation accuracy compared to 32-bit training across seven deep learning applications.

This paper presents the first comprehensive empirical study demonstrating the efficacy of the Brain Floating Point (BFLOAT16) half-precision format for Deep Learning training across image classification, speech recognition, language modeling, generative networks and industrial recommendation systems. BFLOAT16 is attractive for Deep Learning training for two reasons: the range of values it can represent is the same as that of IEEE 754 floating-point format (FP32) and conversion to/from FP32 is simple. Maintaining the same range as FP32 is important to ensure that no hyper-parameter tuning is required for convergence; e.g., IEEE 754 compliant half-precision floating point (FP16) requires hyper-parameter tuning. In this paper, we discuss the flow of tensors and various key operations in mixed precision training, and delve into details of operations, such as the rounding modes for converting FP32 tensors to BFLOAT16. We have implemented a method to emulate BFLOAT16 operations in Tensorflow, Caffe2, IntelCaffe, and Neon for our experiments. Our results show that deep learning training using BFLOAT16 tensors achieves the same state-of-the-art (SOTA) results across domains as FP32 tensors in the same number of iterations and with no changes to hyper-parameters.

We present unit scaling, a paradigm for designing deep learning models that simplifies the use of low-precision number formats. Training in FP16 or the recently proposed FP8 formats offers substantial efficiency gains, but can lack sufficient range for out-of-the-box training. Unit scaling addresses this by introducing a principled approach to model numerics: seeking unit variance of all weights, activations and gradients at initialisation. Unlike alternative methods, this approach neither requires multiple training runs to find a suitable scale nor has significant computational overhead. We demonstrate the efficacy of unit scaling across a range of models and optimisers. We further show that existing models can be adapted to be unit-scaled, training BERT-Large in FP16 and then FP8 with no degradation in accuracy.

The burgeoning computational demands for training large language models (LLMs) necessitate efficient methods, including quantized training, which leverages low-bit arithmetic operations to reduce costs. While FP8 precision has shown potential, leveraging FP4 remains challenging due to inherent quantization errors and limited representation capability. Based on the Transformer architecture, we present an FP4 training scheme for LLMs, overcoming these obstacles through mixed-precision quantization strategies tailed for different modules and training stages. This allows us to apply the precision level suitable to distinct components within the model, ensuring that multi-head attention and linear layers are handled appropriately. Our pretraining recipe ensures stability in backpropagation by incorporating fine-grained quantization methods with a target precision training schedule. Experimental results demonstrate that our FP4 training scheme achieves accuracy comparable to BF16 and FP8, with smaller theoretical computational cost. With the advent of next-generation hardware supporting FP4, our method sets the foundation for efficient ultra-low precision training.

This study examines 4-bit quantization methods like GPTQ in large language models (LLMs), highlighting GPTQ's overfitting and limited enhancement in Zero-Shot tasks. While prior works merely focusing on zero-shot measurement, we extend task scope to more generative categories such as code generation and abstractive summarization, in which we found that INT4 quantization can significantly underperform. However, simply shifting to higher precision formats like FP6 has been particularly challenging, thus overlooked, due to poor performance caused by the lack of sophisticated integration and system acceleration strategies on current AI hardware. Our results show that FP6, even with a coarse-grain quantization scheme, performs robustly across various algorithms and tasks, demonstrating its superiority in accuracy and versatility. Notably, with the FP6 quantization, \codestar-15B model performs comparably to its FP16 counterpart in code generation, and for smaller models like the 406M it closely matches their baselines in summarization. Neither can be achieved by INT4. To better accommodate various AI hardware and achieve the best system performance, we propose a novel 4+2 design for FP6 to achieve similar latency to the state-of-the-art INT4 fine-grain quantization. With our design, FP6 can become a promising solution to the current 4-bit quantization methods used in LLMs.

The growing computational demands of training large language models (LLMs) necessitate more efficient methods. Quantized training presents a promising solution by enabling low-bit arithmetic operations to reduce these costs. While FP8 precision has demonstrated feasibility, leveraging FP4 remains a challenge due to significant quantization errors and limited representational capacity. This work introduces the first FP4 training framework for LLMs, addressing these challenges with two key innovations: a differentiable quantization estimator for precise weight updates and an outlier clamping and compensation strategy to prevent activation collapse. To ensure stability, the framework integrates a mixed-precision training scheme and vector-wise quantization. Experimental results demonstrate that our FP4 framework achieves accuracy comparable to BF16 and FP8, with minimal degradation, scaling effectively to 13B-parameter LLMs trained on up to 100B tokens. With the emergence of next-generation hardware supporting FP4, our framework sets a foundation for efficient ultra-low precision training.

The state-of-the-art (SOTA) for mixed precision training is dominated by variants of low precision floating point operations, and in particular, FP16 accumulating into FP32 Micikevicius et al. (2017). On the other hand, while a lot of research has also happened in the domain of low and mixed-precision Integer training, these works either present results for non-SOTA networks (for instance only AlexNet for ImageNet-1K), or relatively small datasets (like CIFAR-10). In this work, we train state-of-the-art visual understanding neural networks on the ImageNet-1K dataset, with Integer operations on General Purpose (GP) hardware. In particular, we focus on Integer Fused-Multiply-and-Accumulate (FMA) operations which take two pairs of INT16 operands and accumulate results into an INT32 output.We propose a shared exponent representation of tensors and develop a Dynamic Fixed Point (DFP) scheme suitable for common neural network operations. The nuances of developing an efficient integer convolution kernel is examined, including methods to handle overflow of the INT32 accumulator. We implement CNN training for ResNet-50, GoogLeNet-v1, VGG-16 and AlexNet; and these networks achieve or exceed SOTA accuracy within the same number of iterations as their FP32 counterparts without any change in hyper-parameters and with a 1.8X improvement in end-to-end training throughput. To the best of our knowledge these results represent the first INT16 training results on GP hardware for ImageNet-1K dataset using SOTA CNNs and achieve highest reported accuracy using half-precision

We train, for the first time, large language models using FP8 precision on datasets up to 2 trillion tokens -- a 20-fold increase over previous limits. Through these extended training runs, we uncover critical instabilities in FP8 training that were not observable in earlier works with shorter durations. We trace these instabilities to outlier amplification by the SwiGLU activation function. Interestingly, we show, both analytically and empirically, that this amplification happens only over prolonged training periods, and link it to a SwiGLU weight alignment process. To address this newly identified issue, we introduce Smooth-SwiGLU, a novel modification that ensures stable FP8 training without altering function behavior. We also demonstrate, for the first time, FP8 quantization of both Adam optimizer moments. Combining these innovations, we successfully train a 7B parameter model using FP8 precision on 256 Intel Gaudi2 accelerators, achieving on-par results with the BF16 baseline while delivering up to a sim 34 % throughput improvement.

We demonstrate, for the first time, fully quantized training (FQT) of large language models (LLMs) using predominantly 4-bit floating-point (FP4) precision for weights, activations, and gradients on datasets up to 200 billion tokens. We extensively investigate key design choices for FP4, including block sizes, scaling formats, and rounding methods. Our analysis shows that the NVFP4 format, where each block of 16 FP4 values (E2M1) shares a scale represented in E4M3, provides optimal results. We use stochastic rounding for backward and update passes and round-to-nearest for the forward pass to enhance stability. Additionally, we identify a theoretical and empirical threshold for effective quantized training: when the gradient norm falls below approximately 3 times the quantization noise, quantized training becomes less effective. Leveraging these insights, we successfully train a 7-billion-parameter model on 256 Intel Gaudi2 accelerators. The resulting FP4-trained model achieves downstream task performance comparable to a standard BF16 baseline, confirming that FP4 training is a practical and highly efficient approach for large-scale LLM training. A reference implementation is supplied in https://github.com/Anonymous1252022/fp4-all-the-way .

Ever-growing scale of large language models (LLMs) is pushing for improved efficiency, favoring fully quantized training (FQT) over BF16. While FQT accelerates training, it faces consistency challenges and requires searching over an exponential number of cases, each needing over 200B tokens to ensure stability. Pseudo-quantization training (PQT) addresses the issues of FQT, although it is not well-studied. We explore the practical implications of PQT in detail and propose a noise distribution R that is floating-point (FP)-friendly, with ideal properties including stochastic precision annealing. As a result, the proposed method serves as an effective theoretical foundation for low-precision FP parameters through PQT, utilizing efficient fake quantization via an addition and subsequent FP casting. We demonstrate that Gaussian weight sampling is (1) scalable: supports low-precision FP parameters down to FP6 and high-precision noise up to 9-bit with BF16 operator. The proposed method is (2) efficient: incurring computational overhead as low as 1.40\% on the A100 GPU in terms of Llama2 training tokens per second, and requiring 2 bytes per parameter in GPU memory. We demonstrate that PQT with Gaussian weight sampling is (3) stable: closely following or even surpassing performance of the BF16 baseline while pre-training GPT2 and Llama2 models with up to 1B parameters and 300B tokens.

Low precision (LP) datatypes such as MXFP4 can accelerate matrix multiplications (GEMMs) and reduce training costs. However, directly using MXFP4 instead of BF16 during training significantly degrades model quality. In this work, we present the first near-lossless training recipe that uses MXFP4 GEMMs, which are 2times faster than FP8 on supported hardware. Our key insight is to compute unbiased gradient estimates with stochastic rounding (SR), resulting in more accurate model updates. However, directly applying SR to MXFP4 can result in high variance from block-level outliers, harming convergence. To overcome this, we use the random Hadamard tranform to theoretically bound the variance of SR. We train GPT models up to 6.7B parameters and find that our method induces minimal degradation over mixed-precision BF16 training. Our recipe computes >1/2 the training FLOPs in MXFP4, enabling an estimated speedup of >1.3times over FP8 and >1.7times over BF16 during backpropagation.

Reinforcement learning (RL) is essential for enhancing the complex reasoning capabilities of large language models (LLMs). However, existing RL training pipelines are computationally inefficient and resource-intensive, with the rollout phase accounting for over 70% of total training time. Quantized RL training, particularly using FP8 precision, offers a promising approach to mitigating this bottleneck. A commonly adopted strategy applies FP8 precision during rollout while retaining BF16 precision for training. In this work, we present the first comprehensive study of FP8 RL training and demonstrate that the widely used BF16-training + FP8-rollout strategy suffers from severe training instability and catastrophic accuracy collapse under long-horizon rollouts and challenging tasks. Our analysis shows that these failures stem from the off-policy nature of the approach, which introduces substantial numerical mismatch between training and inference. Motivated by these observations, we propose Jet-RL, an FP8 RL training framework that enables robust and stable RL optimization. The key idea is to adopt a unified FP8 precision flow for both training and rollout, thereby minimizing numerical discrepancies and eliminating the need for inefficient inter-step calibration. Extensive experiments validate the effectiveness of Jet-RL: our method achieves up to 33% speedup in the rollout phase, up to 41% speedup in the training phase, and a 16% end-to-end speedup over BF16 training, while maintaining stable convergence across all settings and incurring negligible accuracy degradation.

The immense computational cost of training Large Language Models (LLMs) presents a major barrier to innovation. While FP8 training offers a promising solution with significant theoretical efficiency gains, its widespread adoption has been hindered by the lack of a comprehensive, open-source training recipe. To bridge this gap, we introduce an end-to-end FP8 training recipe that seamlessly integrates continual pre-training and supervised fine-tuning. Our methodology employs a fine-grained, hybrid-granularity quantization strategy to maintain numerical fidelity while maximizing computational efficiency. Through extensive experiments, including the continue pre-training of models on a 160B-token corpus, we demonstrate that our recipe is not only remarkably stable but also essentially lossless, achieving performance on par with the BF16 baseline across a suite of reasoning benchmarks. Crucially, this is achieved with substantial efficiency improvements, including up to a 22% reduction in training time, a 14% decrease in peak memory usage, and a 19% increase in throughput. Our results establish FP8 as a practical and robust alternative to BF16, and we will release the accompanying code to further democratize large-scale model training.

Large Language Models (LLMs) have attracted significant attention due to their human-like language understanding and generation capabilities, as well as their applicability across various domains. These models, characterized by their massive scale and extensive training data, continue to push the boundaries of what is possible in natural language processing. The Llama 3 series, for instance, exemplifies this trend with its flagship model boasting 405 billion parameters trained on 15.6 trillion tokens. The immense computational demands associated with training such models have spurred ongoing research into optimizing the efficiency of the training process, particularly through the use of lower-precision formats. NVIDIA's H100 GPU, which introduces support for FP8 in addition to the more conventional FP16 and BF16 formats, has emerged as a focal point in this optimization effort. Preliminary studies suggest that FP8 could offer substantial reductions in training time without sacrificing model performance when compared to BF16, making it a promising candidate for large-scale model training. However, the broader implications of adopting FP8, particularly in terms of training stability and downstream task performance, have yet to be fully understood. In this study, we delve into the practical trade-offs involved in adopting FP8 over BF16 for training LLMs.

Large Language Models (LLMs) are now integral across various domains and have demonstrated impressive performance. Progress, however, rests on the premise that benchmark scores are both accurate and reproducible. We demonstrate that the reproducibility of LLM performance is fragile: changing system configuration such as evaluation batch size, GPU count, and GPU version can introduce significant difference in the generated responses. This issue is especially pronounced in reasoning models, where minor rounding differences in early tokens can cascade into divergent chains of thought, ultimately affecting accuracy. For instance, under bfloat16 precision with greedy decoding, a reasoning model like DeepSeek-R1-Distill-Qwen-7B can exhibit up to 9% variation in accuracy and 9,000 tokens difference in response length due to differences in GPU count, type, and evaluation batch size. We trace the root cause of this variability to the non-associative nature of floating-point arithmetic under limited numerical precision. This work presents the first systematic investigation into how numerical precision affects reproducibility in LLM inference. Through carefully controlled experiments across various hardware, software, and precision settings, we quantify when and how model outputs diverge. Our analysis reveals that floating-point precision -- while critical for reproducibility -- is often neglected in evaluation practices. Inspired by this, we develop a lightweight inference pipeline, dubbed LayerCast, that stores weights in 16-bit precision but performs all computations in FP32, balancing memory efficiency with numerical stability. Code is available at https://github.com/nanomaoli/llm_reproducibility.

Winograd convolution is the standard algorithm for efficient inference, reducing arithmetic complexity by 2.25x for 3x3 kernels. However, it faces a critical barrier in the modern era of low precision computing: numerical instability. As tiles scale to maximize efficiency (e.g., F(6,3), F(8,3)), the condition numbers of standard integer based transforms explode, reaching kappa = 2 x 10^5 for F(8,3), rendering them unusable in FP16 or Int8. We introduce NOVA (Numerical Optimization of Vandermonde Arithmetic), a discovery framework that breaks the decades old convention of integer interpolation. Treating Winograd point selection as a continuous optimization problem, NOVA searches the manifold R^n-1 via Evolution Strategy, snaps candidates to simple rationals, and guarantees correctness via symbolic verification. This process uncovers a hidden landscape of stable, fractional configurations such as {+-5/6, +-7/6, +-3/5} that defy traditional vocabulary constraints. The impact is transformative: NOVA improves the conditioning of F(8,3) by 415x in 1D, which squares to a 172,484x improvement for 2D convolution. In real world FP16 ImageNet inference, where standard transforms collapse to random chance (e.g., 4.7 percent accuracy on VGG16), NOVA's points restore full accuracy (75 to 78 percent), recovering over 70 percentage points without retraining, calibration, or learned parameters. These discovered transforms act as drop in replacements, effectively unlocking the efficiency of large tile Winograd convolution for next generation hardware.

W4A4 quantization promises full utilization of INT4 Tensor Cores, yet group dequantization overhead on CUDA Cores has driven existing systems to mixed-precision fallbacks. We present the first systematic study of how intra-SM compute balance governs this bottleneck. Through controlled benchmarks across four GPUs from Ampere and Ada architectures, we identify the Tensor Cores to CUDA Cores throughput ratio (ρ) as the primary hardware indicator: the W4A4-g128 kernel yields 2.0--2.5times speedup on RTX~3090 (ρ=16) yet degrades to 0.43--0.47times on A100 (ρ=64) in compute-bond scenarios, establishing W4A4 viability as platform-dependent rather than universally infeasible. Guided by this finding, we build APEX4, which co-designs pure INT4 GEMM kernels with ρ-aware granularity adaptation to mitigate the CUDA Cores dequantization bottleneck. APEX4 achieves perplexity within 0.63 of FP16 on LLaMA-2-70B and outperforms W4Ax Atom-g128 by 4.0\%--4.4\% in zero-shot accuracy. Deployed as a drop-in replacement in unmodified vLLM, it delivers up to 1.66times end-to-end speedup on L40S (ρ=8), and 1.78times on RTX~3090 (ρ=16), 2.09times on A40 (ρ=16), while recovering A100 (ρ=64) to 1.20--1.40times via the mixed-granularity mode. Our code is available at https://github.com/APEX4-W4A4/APEX4-W4A4.

Large language models with billions of parameters are often over-provisioned: many layers contribute little unique information yet dominate the memory and energy footprint during inference. We present LieQ, a metric-driven post-training quantization framework that addresses the critical challenge of maintaining accuracy in sub-7B models under extreme low-bit compression. Our method introduces three complementary layer-wise diagnostics-Perplexity Drop, Representational Compactness, and Top-k Energy Gain -that reveal a canonical division of labour across layers, enabling automatic bit-width allocation without gradient updates. Unlike existing approaches that suffer severe accuracy degradation at 2-3 bits precision, LieQ achieves state-of-the-art compression-accuracy trade-offs: on Qwen3-4B, it recovers 95.9% of FP16 baseline performance at 2.05-bit quantization, outperforming GPTQ by 19.7% and AWQ by 18.1% on average across seven zero-shot reasoning tasks. Applied to LLaMA3.2-3B, LieQ maintains 98.2% of baseline accuracy at 2.07-bit precision while enabling 4x memory reduction, establishing new paradigms for deploying small language models on resource-constrained edge devices.

ModeSwitch-LLM is a lightweight request-boundary controller for improving single-GPU large language model inference efficiency by routing each request to an appropriate fixed inference mode. Instead of relying on one static serving configuration, the system selects among FP16, quantized modes, speculative decoding, and hybrid modes such as GPTQ plus prefix caching and INT8 plus continuous batching using cheap workload-level features. We evaluate ModeSwitch-LLM on Meta-Llama-3.1-8B-Instruct served on a single NVIDIA A100 GPU. On deployment-style synthetic workloads, the online controller achieves a 2.10x mean latency speedup over FP16 and a 0.48x mean energy ratio, corresponding to 51.7% lower energy per token. On automatic benchmarks used as a quality gate, accuracy remains close to FP16 with a mean delta of +0.17 percentage points. We also evaluate lightweight learned routers, but find that they do not clearly outperform the rule-based controller because they add routing overhead and more often select modes that violate quality, energy, or memory constraints. These results show that simple request-aware routing can recover substantial efficiency from existing inference modes without retraining the model or changing its architecture.

Large Language Models (LLMs) have achieved remarkable progress across reasoning, generation, and decision-making tasks, yet deploying them on mobile, embedded, and edge devices remains particularly challenging. On-device LLM inference is heavily constrained by the memory and bandwidth overhead of the key-value (KV) cache, which grows linearly with context length and often dominates decoding cost. Existing KV-cache quantization schemes typically rely on fixed precision or hand-crafted heuristics, thereby wasting bits on low-impact tokens while over-compressing informative ones, leading to avoidable accuracy degradation. Inspired by Huffman coding's principle of variable-length allocation, we propose adaptive KV-cache quantization, a learned policy that assigns bit-width proportional to token importance, minimizing expected memory and latency without sacrificing competitive accuracy. Our framework extracts lightweight token-level features, including token frequency, quality score, attention variance, and entropy-based uncertainty, and feeds them into a compact data-driven controller that dynamically selects KV precision from {2-bit, 4-bit, 8-bit, FP16} during decoding. This adaptive precision policy reduces KV memory footprint and latency while improving accuracy compared to static KV quantization and rule-based baselines, and maintaining competitive accuracy close to FP16 inference across standard LLM benchmarks. Extensive experiments across multiple commonsense reasoning benchmarks using SmolLM-135M, SmolLM-360M, and SmolLM-1.7B demonstrate that our controller consistently improves the accuracy-latency trade-off. For instance, with SmolLM-360M on HellaSwag, our method reduces decoding latency (ms/token) by 17.75% relative to static KV quantization, improves accuracy by 7.60 points, and remains within only 0.30 points of FP16 inference.

The recent hardware-accelerated microscaling 4-bit floating-point formats such as MXFP4 and NVFP4, supported on NVIDIA and AMD GPUs, promise to revolutionize large language model (LLM) inference. Yet, their practical benefits remain unproven. We present the first comprehensive study of MXFP4 and NVFP4 for post-training quantization, revealing gaps between their promise and real-world performance. Our analysis shows that state-of-the-art methods struggle with FP4, due to two key issues: (1) NVFP4's small group size provably neutralizes traditional outlier mitigation techniques; (2) MXFP4's power-of-two scale quantization severely degrades accuracy due to high induced error. To bridge this gap, we introduce Micro-Rotated-GPTQ (MR-GPTQ), a variant of the classic GPTQ quantization algorithm that tailors the quantization process to FP4's unique properties, by using block-wise Hadamard transforms and format-specific optimizations. We support our proposal with a set of high-performance GPU kernels that enable the MR-GPTQ format with negligible overhead, by rotation fusion into the weights, and fast online computation of the activations. This leads to speedups vs. FP16 of up to 3.6x layer-wise, and 2.2x end-to-end on NVIDIA B200, and of 6x layer-wise and 4x end-to-end on RTX5090. Our extensive empirical evaluation demonstrates that MR-GPTQ matches or outperforms state-of-the-art accuracy, significantly boosting MXFP4, to the point where it nears that of NVFP4. We conclude that, while FP4 is not an automatic upgrade over INT4, format-specialized methods like MR-GPTQ can unlock a new frontier of accuracy-performance trade-offs.

Quantization has been widely used to compress and accelerate inference of large language models (LLMs). Existing methods focus on exploring the per-token dynamic calibration to ensure both inference acceleration and model accuracy under 4-bit quantization. However, in autoregressive generation inference of long sequences, the overhead of repeated dynamic quantization and dequantization steps becomes considerably expensive. In this work, we propose MergeQuant, an accurate and efficient per-channel static quantization framework. MergeQuant integrates the per-channel quantization steps with the corresponding scalings and linear mappings through a Quantization Step Migration (QSM) method, thereby eliminating the quantization overheads before and after matrix multiplication. Furthermore, in view of the significant differences between the different channel ranges, we propose dimensional reconstruction and adaptive clipping to address the non-uniformity of quantization scale factors and redistribute the channel variations to the subsequent modules to balance the parameter distribution under QSM. Within the static quantization setting of W4A4, MergeQuant reduces the accuracy gap on zero-shot tasks compared to FP16 baseline to 1.3 points on Llama-2-70B model. On Llama-2-7B model, MergeQuant achieves up to 1.77x speedup in decoding, and up to 2.06x speedup in end-to-end compared to FP16 baseline.

The rapid advancement of large language models (LLMs) has been paralleled by unprecedented increases in computational demands, with training costs for state-of-the-art models doubling every few months. Training models directly in low-precision arithmetic offers a solution, by improving both computational throughput and energy efficiency. Specifically, NVIDIA's recent Blackwell architecture facilitates extremely low-precision operations, specifically FP4 variants, promising substantial efficiency gains. Yet, current algorithms for training LLMs in FP4 precision face significant accuracy degradation and often rely on mixed-precision fallbacks. In this paper, we systematically investigate hardware-supported FP4 training and introduce Quartet, a new approach enabling accurate, end-to-end FP4 training with all the major computations (in e.g. linear layers) being performed in low precision. Through extensive evaluations on Llama-type models, we reveal a new low-precision scaling law that quantifies performance trade-offs across varying bit-widths and allows us to identify a "near-optimal" low-precision training technique in terms of accuracy-vs-computation, called Quartet. We implement Quartet using optimized CUDA kernels tailored for NVIDIA Blackwell GPUs, and show that it can achieve state-of-the-art accuracy for FP4 precision, successfully training billion-scale models. Our method demonstrates that fully FP4-based training is a competitive alternative to standard-precision and FP8 training. Our code is available at https://github.com/IST-DASLab/Quartet.

The NVFP4 lower-precision format, supported in hardware by NVIDIA Blackwell GPUs, promises to allow, for the first time, end-to-end fully-quantized pre-training of massive models such as LLMs. Yet, existing quantized training methods still sacrifice some of the representation capacity of this format in favor of more accurate unbiased quantized gradient estimation by stochastic rounding (SR), losing noticeable accuracy relative to standard FP16 and FP8 training. In this paper, improve the state of the art for quantized training in NVFP4 via a novel unbiased quantization routine for micro-scaled formats, called MS-EDEN, that has more than 2x lower quantization error than SR. We integrate it into a novel fully-NVFP4 quantization scheme for linear layers, called Quartet II. We show analytically that Quartet II achieves consistently better gradient estimation across all major matrix multiplications, both on the forward and on the backward passes. In addition, our proposal synergizes well with recent training improvements aimed specifically at NVFP4. We further validate Quartet II on end-to-end LLM training with up to 1.9B parameters on 38B tokens. We provide kernels for execution on NVIDIA Blackwell GPUs with up to 4.2x speedup over BF16. Our code is available at https://github.com/IST-DASLab/Quartet-II .

One approach to reducing the massive costs of large language models (LLMs) is the use of quantized or sparse representations for training or deployment. While post-training compression methods are very popular, the question of obtaining even more accurate compressed models by directly training over such representations, i.e., Quantization-Aware Training (QAT), is still open: for example, a recent study (arXiv:2411.04330v2) put the "optimal" bit-width at which models can be trained using QAT, while staying accuracy-competitive with standard FP16/BF16 precision, at 8-bits weights and activations. We advance this state-of-the-art via a new method called QuEST, which is Pareto-competitive with FP16, i.e., it provides better accuracy at lower model size, while training models with weights and activations in 4-bits or less. Moreover, QuEST allows stable training with 1-bit weights and activations. QuEST achieves this by improving two key aspects of QAT methods: (1) accurate and fast quantization of the (continuous) distributions of weights and activations via Hadamard normalization and MSE-optimal fitting; (2) a new trust gradient estimator based on the idea of explicitly minimizing the error between the noisy gradient computed over quantized states and the "true" (but unknown) full-precision gradient. Experiments on Llama-type architectures show that QuEST induces stable scaling laws across the entire range of hardware-supported precisions, and can be extended to sparse representations. We provide GPU kernel support showing that models produced by QuEST can be executed efficiently. Our code is available at https://github.com/IST-DASLab/QuEST.

Prior research works have evaluated quantized LLMs using limited metrics such as perplexity or a few basic knowledge tasks and old datasets. Additionally, recent large-scale models such as Llama 3.1 with up to 405B have not been thoroughly examined. This paper evaluates the performance of instruction-tuned LLMs across various quantization methods (GPTQ, AWQ, SmoothQuant, and FP8) on models ranging from 7B to 405B. Using 13 benchmarks, we assess performance across six task types: commonsense Q\&A, knowledge and language understanding, instruction following, hallucination detection, mathematics, and dialogue. Our key findings reveal that (1) quantizing a larger LLM to a similar size as a smaller FP16 LLM generally performs better across most benchmarks, except for hallucination detection and instruction following; (2) performance varies significantly with different quantization methods, model size, and bit-width, with weight-only methods often yielding better results in larger models; (3) task difficulty does not significantly impact accuracy degradation due to quantization; and (4) the MT-Bench evaluation method has limited discriminatory power among recent high-performing LLMs.

We present VibeVoice-ASR-BitNet, a compressed variant of VibeVoice-ASR optimized for real-time inference on edge CPUs. We apply heterogeneous quantization tailored to the computational characteristics of each stage: the VAE acoustic tokenizer uses full-pipeline INT8 quantization (I8_S) with kernel fusion and SIMD optimization, while the autoregressive language model adopts BitNet-style ternary weights (I2_S). To preserve accuracy under aggressive compression, we employ a progressive quantization-aware training strategy. For inference, we implement custom SIMD kernels and fused operators within the ggml framework targeting both ARM and x86 platforms, achieving real-time recognition with RTF < 1 using as few as 3 CPU threads. VibeVoice-ASR-BitNet is 1.6-2.3x faster than Whisper.cpp at comparable model sizes (~1.6 GB), with only modest accuracy degradation compared to the FP16 baseline.

Large Language Models (LLMs) have transformed natural language processing, but face significant challenges in widespread deployment due to their high runtime cost. In this paper, we introduce SeedLM, a novel post-training compression method that uses seeds of pseudo-random generators to encode and compress model weights. Specifically, for each block of weights, we find a seed that is fed into a Linear Feedback Shift Register (LFSR) during inference to efficiently generate a random matrix. This matrix is then linearly combined with compressed coefficients to reconstruct the weight block. SeedLM reduces memory access and leverages idle compute cycles during inference, effectively speeding up memory-bound tasks by trading compute for fewer memory accesses. Unlike state-of-the-art compression methods that rely on calibration data, our approach is data-free and generalizes well across diverse tasks. Our experiments with Llama 3 70B, which is particularly challenging to compress, show that SeedLM achieves significantly better zero-shot accuracy retention at 4- and 3-bit than state-of-the-art techniques, while maintaining performance comparable to FP16 baselines. Additionally, FPGA-based tests demonstrate that 4-bit SeedLM, as model size increases to 70B, approaches a 4x speed-up over an FP16 Llama 2/3 baseline.

Large language models (LLMs) have shown remarkable capabilities in various tasks. However their huge model size and the consequent demand for computational and memory resources also pose challenges to model deployment. Currently, 4-bit post-training quantization (PTQ) has achieved some success in LLMs, reducing the memory footprint by approximately 75% compared to FP16 models, albeit with some accuracy loss. In this paper, we propose SmoothQuant+, an accurate and efficient 4-bit weight-only PTQ that requires no additional training, which enables lossless in accuracy for LLMs for the first time. Based on the fact that the loss of weight quantization is amplified by the activation outliers, SmoothQuant+ smoothes the activation outliers by channel before quantization, while adjusting the corresponding weights for mathematical equivalence, and then performs group-wise 4-bit weight quantization for linear layers. We have integrated SmoothQuant+ into the vLLM framework, an advanced high-throughput inference engine specially developed for LLMs, and equipped it with an efficient W4A16 CUDA kernels, so that vLLM can seamlessly support SmoothQuant+ 4-bit weight quantization. Our results show that, with SmoothQuant+, the Code Llama-34B model can be quantized and deployed on a A100 40GB GPU, achieving lossless accuracy and a throughput increase of 1.9 to 4.0 times compared to the FP16 model deployed on two A100 40GB GPUs. Moreover, the latency per token is only 68% of the FP16 model deployed on two A100 40GB GPUs. This is the state-of-the-art 4-bit weight quantization for LLMs as we know.

Fine-tuning large language models (LLMs) with parameter-efficient techniques such as LoRA and QLoRA has enabled adaptation of foundation models on modest hardware. Yet the efficiency of such training on consumer-grade GPUs, especially under strict 8 GB VRAM limits, remains underexplored. We present a controlled profiling study of LoRA/QLoRA fine-tuning using the Qwen2.5-1.5B-Instruct model on a single NVIDIA RTX 4060. Across three representative configurations, we systematically vary batch size, sequence length, optimizer choice (AdamW vs. PagedAdamW), and precision (fp16 vs. bf16). We report throughput (tokens/s), time per 10k tokens, and VRAM footprint, alongside energy estimates derived from GPU board power limits. Our results show that paged optimizers improve throughput by up to 25% (628 tok/s vs. 500 tok/s baseline), while bf16 degrades efficiency relative to fp16. Despite 8 GB constraints, sequence lengths up to 2048 tokens were feasible using parameter-efficient strategies. To our knowledge, this is the first systematic case study of LLM fine- tuning efficiency on consumer GPUs, providing reproducible benchmarks and practical guidelines for resource-constrained researchers and practitioners.

Low-precision data types are essential in modern neural networks during both training and inference as they enhance throughput and computational capacity by better exploiting available hardware resources. Despite the incorporation of FP8 in commercially available neural network accelerators, a comprehensive exposition of its underlying mechanisms, along with rigorous performance and accuracy evaluations, is still lacking. In this work, we contribute in three significant ways. First, we analyze the implementation details and quantization options associated with FP8 for inference on the Intel Gaudi AI accelerator. Second, we empirically quantify the throughput improvements afforded by the use of FP8 at both the operator level and in end-to-end scenarios. Third, we assess the accuracy impact of various FP8 quantization methods. Our experimental results indicate that the Intel Gaudi 2 accelerator consistently achieves high computational unit utilization, frequently exceeding 90% MFU, while incurring an accuracy degradation of less than 1%.

We introduce the Formally Verified Automated Programming Progress Standards, or FVAPPS, a benchmark of 4715 samples for writing programs and proving their correctness, the largest formal verification benchmark, including 1083 curated and quality controlled samples. Previously, APPS provided a benchmark and dataset for programming puzzles to be completed in Python and checked against unit tests, of the kind seen in technical assessments in the software engineering industry. Building upon recent approaches for benchmarks in interactive theorem proving, we generalize the unit tests to Lean 4 theorems given without proof (i.e., using Lean's "sorry" keyword). On the 406 theorems of 100 randomly selected samples, Sonnet correctly proves 30% and Gemini correctly proves 18%. We challenge the machine learning and program synthesis communities to solve both each general purpose programming problem and its associated correctness specifications. The benchmark is available at https://huggingface.co/datasets/quinn-dougherty/fvapps.

In this paper, we explore FP8 low-bit data formats for efficient training of large language models (LLMs). Our key insight is that most variables, such as gradients and optimizer states, in LLM training can employ low-precision data formats without compromising model accuracy and requiring no changes to hyper-parameters. Specifically, we propose a new FP8 automatic mixed-precision framework for training LLMs. This framework offers three levels of FP8 utilization to streamline mixed-precision and distributed parallel training for LLMs. It gradually incorporates 8-bit gradients, optimizer states, and distributed learning in an incremental manner. Experiment results show that, during the training of GPT-175B model on H100 GPU platform, our FP8 mixed-precision training framework not only achieved a remarkable 42% reduction in real memory usage but also ran 64% faster than the widely adopted BF16 framework (i.e., Megatron-LM), surpassing the speed of Nvidia Transformer Engine by 17%. This largely reduces the training costs for large foundation models. Furthermore, our FP8 mixed-precision training methodology is generic. It can be seamlessly applied to other tasks such as LLM instruction tuning and reinforcement learning with human feedback, offering savings in fine-tuning expenses. Our FP8 low-precision training framework is open-sourced at {https://github.com/Azure/MS-AMP}{aka.ms/MS.AMP}.

Recently, the idea of using FP8 as a number format for neural network training has been floating around the deep learning world. Given that most training is currently conducted with entire networks in FP32, or sometimes FP16 with mixed-precision, the step to having some parts of a network run in FP8 with 8-bit weights is an appealing potential speed-up for the generally costly and time-intensive training procedures in deep learning. A natural question arises regarding what this development means for efficient inference on edge devices. In the efficient inference device world, workloads are frequently executed in INT8. Sometimes going even as low as INT4 when efficiency calls for it. In this whitepaper, we compare the performance for both the FP8 and INT formats for efficient on-device inference. We theoretically show the difference between the INT and FP formats for neural networks and present a plethora of post-training quantization and quantization-aware-training results to show how this theory translates to practice. We also provide a hardware analysis showing that the FP formats are somewhere between 50-180% less efficient in terms of compute in dedicated hardware than the INT format. Based on our research and a read of the research field, we conclude that although the proposed FP8 format could be good for training, the results for inference do not warrant a dedicated implementation of FP8 in favor of INT8 for efficient inference. We show that our results are mostly consistent with previous findings but that important comparisons between the formats have thus far been lacking. Finally, we discuss what happens when FP8-trained networks are converted to INT8 and conclude with a brief discussion on the most efficient way for on-device deployment and an extensive suite of INT8 results for many models.

Achieving reliable 4-bit attention is a prerequisite for end-to-end FP4 computation on emerging FP4-capable GPUs, yet attention remains the main obstacle due to FP4's tiny dynamic range and attention's heavy-tailed activations. This paper presents the first systematic study of 4-bit quantization-aware training (QAT) for attention. We find that "drop-in" QAT, which naively combines an FP4 forward pass with a high-precision Flash Attention (FA)-style backward pass, leads to training instability. We identify two key principles for stable FP4 attention: (1) matching low-precision recomputation of attention scores in the backward pass, and (2) resolving implicit precision assumptions in FA's gradient calculation. Based on these insights, we propose Attn-QAT and implement fused Triton kernels for training as well as FP4 inference kernels. Across diffusion and language models, Attn-QAT recovers the quality drop from FP4 attention without explicit outlier-mitigation heuristics used in prior FP4 attention, and delivers up to a 1.5x speedup on an RTX 5090. Video demos can be found at https://drive.google.com/drive/folders/190F6xbBDUF2kGQYIcXBt3ehSYij5jlim?usp=sharing.

Recent advances in deep learning methods such as LLMs and Diffusion models have created a need for improved quantization methods that can meet the computational demands of these modern architectures while maintaining accuracy. Towards this goal, we study the advantages of FP8 data formats for post-training quantization across 75 unique network architectures covering a wide range of tasks, including machine translation, language modeling, text generation, image classification, generation, and segmentation. We examine three different FP8 representations (E5M2, E4M3, and E3M4) to study the effects of varying degrees of trade-off between dynamic range and precision on model accuracy. Based on our extensive study, we developed a quantization workflow that generalizes across different network architectures. Our empirical results show that FP8 formats outperform INT8 in multiple aspects, including workload coverage (92.64% vs. 65.87%), model accuracy and suitability for a broader range of operations. Furthermore, our findings suggest that E4M3 is better suited for NLP models, whereas E3M4 performs marginally better than E4M3 on computer vision tasks. The code is publicly available on Intel Neural Compressor: https://github.com/intel/neural-compressor.

Reinforcement-Learning-based post-training has recently emerged as a promising paradigm for aligning text-to-image diffusion models with human preferences. In recent studies, increasing the rollout group size yields pronounced performance improvements, indicating substantial room for further alignment gains. However, scaling rollouts on large-scale foundational diffusion models (e.g., FLUX.1-12B) imposes a heavy computational burden. To alleviate this bottleneck, we explore the integration of FP4 quantization into Diffusion RL rollouts. Yet, we identify that naive quantized pipelines inherently introduce risks of performance degradation. To overcome this dilemma between efficiency and training integrity, we propose Sol-RL (Speed-of-light RL), a novel FP4-empowered Two-stage Reinforcement Learning framework. First, we utilize high-throughput NVFP4 rollouts to generate a massive candidate pool and extract a highly contrastive subset. Second, we regenerate these selected samples in BF16 precision and optimize the policy exclusively on them. By decoupling candidate exploration from policy optimization, Sol-RL integrates the algorithmic mechanisms of rollout scaling with the system-level throughput gains of NVFP4. This synergistic algorithm-hardware design effectively accelerates the rollout phase while reserving high-fidelity samples for optimization. We empirically demonstrate that our framework maintains the training integrity of BF16 precision pipeline while fully exploiting the throughput gains enabled by FP4 arithmetic. Extensive experiments across SANA, FLUX.1, and SD3.5-L substantiate that our approach delivers superior alignment performance across multiple metrics while accelerating training convergence by up to 4.64times, unlocking the power of massive rollout scaling at a fraction of the cost.

FP8 is a natural progression for accelerating deep learning training inference beyond the 16-bit formats common in modern processors. In this paper we propose an 8-bit floating point (FP8) binary interchange format consisting of two encodings - E4M3 (4-bit exponent and 3-bit mantissa) and E5M2 (5-bit exponent and 2-bit mantissa). While E5M2 follows IEEE 754 conventions for representatio of special values, E4M3's dynamic range is extended by not representing infinities and having only one mantissa bit-pattern for NaNs. We demonstrate the efficacy of the FP8 format on a variety of image and language tasks, effectively matching the result quality achieved by 16-bit training sessions. Our study covers the main modern neural network architectures - CNNs, RNNs, and Transformer-based models, leaving all the hyperparameters unchanged from the 16-bit baseline training sessions. Our training experiments include large, up to 175B parameter, language models. We also examine FP8 post-training-quantization of language models trained using 16-bit formats that resisted fixed point int8 quantization.

Despite the significant potential of FP8 data formats for large language model (LLM) pre-training, their adoption has been limited due to challenges in maintaining stability at scale. Existing approaches often rely on suboptimal fine-grained FP8 kernels or fall back to higher-precision matrix multiplications (GEMMs) in sensitive components, such as attention projections, compromising potential throughput gains. We introduce a new class of LLM architectures that, for the first time, support FP8 computation for all GEMMs within transformer blocks during both forward and backward passes. This enables unprecedented throughput gains, particularly at scale, while matching the downstream performance of standard BF16 training. Our architecture design reduces large outlier activations, promoting stable long-term FP8 training. In addition, we identify key metrics to monitor low-precision training and predict potential future divergences.

Efficient attention algorithms are critical to mitigate the quadratic cost of attention in long-context workloads. Prior work utilises block-scaled quantisation techniques on Blackwell GPUs to move attention computation to 4-bit precision to accelerate inference. However, these techniques result in significant quality degradation in long-context settings. We show that the output impact of quantisation error is highly non-uniform and increases with the importance of each query-key interaction, concentrating functionally relevant error in a small number of attention blocks that contain the most important tokens. We propose ThriftAttention, a low-bit attention variant that delivers near-FP16 long-context quality at FP4 inference efficiency. This approach proceeds in two stages. First, a heuristic rapidly selects a small number of important query-key block pairs for FP16 precision. Second, the selected blocks are computed in FP16 and the remaining blocks in FP4, with both paths merged via online softmax into a single output. We demonstrate across long-context benchmarks and model families that by computing only 5% of query-key blocks in FP16, ThriftAttention recovers on average 89.1% of the FP4-to-FP16 performance gap. We show ThriftAttention's advantage grows with sequence length, mitigating the systematic FP4 quality degradation observed at longer contexts. The code is available at https://github.com/joesharratt1229/ThriftAttention.

The sampling temperature, a critical hyperparameter in large language models (LLMs), modifies the logits before the softmax layer, thereby reshaping the distribution of output tokens. Recent studies have challenged the Stochastic Parrots analogy by demonstrating that LLMs are capable of understanding semantics rather than merely memorizing data and that randomness, modulated by sampling temperature, plays a crucial role in model inference. In this study, we systematically evaluated the impact of temperature in the range of 0 to 2 on data sets designed to assess six different capabilities, conducting statistical analyses on open source models of three different sizes: small (1B--4B), medium (6B--13B), and large (40B--80B). Our findings reveal distinct skill-specific effects of temperature on model performance, highlighting the complexity of optimal temperature selection in practical applications. To address this challenge, we propose a BERT-based temperature selector that takes advantage of these observed effects to identify the optimal temperature for a given prompt. We demonstrate that this approach can significantly improve the performance of small and medium models in the SuperGLUE datasets. Furthermore, our study extends to FP16 precision inference, revealing that temperature effects are consistent with those observed in 4-bit quantized models. By evaluating temperature effects up to 4.0 in three quantized models, we find that the Mutation Temperature -- the point at which significant performance changes occur -- increases with model size.

In the complex domain of large language models (LLMs), striking a balance between computational efficiency and maintaining model quality is a formidable challenge. Navigating the inherent limitations of uniform quantization, particularly when dealing with outliers, and motivated by the launch of NVIDIA's H100 hardware, this study delves into the viability of floating-point (FP) quantization, particularly focusing on FP8 and FP4, as a potential solution. Our comprehensive investigation reveals that for LLMs, FP8 activation consistently outshines its integer (INT8) equivalent, with the performance edge becoming more noticeable in models possessing parameters beyond one billion. For weight quantization, our findings indicate that FP4 exhibits comparable, if not superior, performance to INT4, simplifying deployment on FP-supported hardware like H100. To mitigate the overhead from precision alignment caused by the disparity between weights and activations, we propose two scaling constraints for weight quantization that negligibly impact the performance compared to the standard W4A8 model. We additionally enhance our quantization methods by integrating the Low Rank Compensation (LoRC) strategy, yielding improvements especially in smaller models. The results of our investigation emphasize the immense potential of FP quantization for LLMs, paving the way for high-efficiency deployment in resource-limited settings.

Large foundation models have become central to modern machine learning, with performance scaling predictably with model size and data. However, training and deploying such models incur substantial computational and memory costs, motivating the development of low-precision training techniques. Recent work has demonstrated that 4-bit floating-point (FP4) formats--such as MXFP4 and NVFP4--can be successfully applied to linear GEMM operations in large language models (LLMs), achieving up to 4x improvements in compute throughput and memory efficiency compared to higher-precision baselines. In this work, we investigate the recently proposed HiFloat4 FP4 format for Huawei Ascend NPUs and systematically compare it with MXFP4 in large-scale training settings. All experiments are conducted on Ascend NPU clusters, with linear and expert GEMM operations performed entirely in FP4 precision. We evaluate both dense architectures (e.g., Pangu and LLaMA-style models) and mixture-of-experts (MoE) models, where both standard linear layers and expert-specific GEMMs operate in FP4. Furthermore, we explore stabilization techniques tailored to FP4 training that significantly reduce numerical degradation, maintaining relative error within 1% of full-precision baselines while preserving the efficiency benefits of 4-bit computation. Our results provide a comprehensive empirical study of FP4 training on NPUs and highlight the practical trade-offs between FP4 formats in large-scale dense and MoE models.

Objective: We investigate whether deep learning techniques for natural language processing (NLP) can be used efficiently for patient phenotyping. Patient phenotyping is a classification task for determining whether a patient has a medical condition, and is a crucial part of secondary analysis of healthcare data. We assess the performance of deep learning algorithms and compare them with classical NLP approaches. Materials and Methods: We compare convolutional neural networks (CNNs), n-gram models, and approaches based on cTAKES that extract pre-defined medical concepts from clinical notes and use them to predict patient phenotypes. The performance is tested on 10 different phenotyping tasks using 1,610 discharge summaries extracted from the MIMIC-III database. Results: CNNs outperform other phenotyping algorithms in all 10 tasks. The average F1-score of our model is 76 (PPV of 83, and sensitivity of 71) with our model having an F1-score up to 37 points higher than alternative approaches. We additionally assess the interpretability of our model by presenting a method that extracts the most salient phrases for a particular prediction. Conclusion: We show that NLP methods based on deep learning improve the performance of patient phenotyping. Our CNN-based algorithm automatically learns the phrases associated with each patient phenotype. As such, it reduces the annotation complexity for clinical domain experts, who are normally required to develop task-specific annotation rules and identify relevant phrases. Our method performs well in terms of both performance and interpretability, which indicates that deep learning is an effective approach to patient phenotyping based on clinicians' notes.

The rapid adaptation of data driven AI models, such as deep learning inference, training, Vision Transformers (ViTs), and other HPC applications, drives a strong need for runtime precision configurable different non linear activation functions (AF) hardware support. Existing solutions support diverse precision or runtime AF reconfigurability but fail to address both simultaneously. This work proposes a flexible and SIMD multiprecision processing element (FlexPE), which supports diverse runtime configurable AFs, including sigmoid, tanh, ReLU and softmax, and MAC operation. The proposed design achieves an improved throughput of up to 16X FxP4, 8X FxP8, 4X FxP16 and 1X FxP32 in pipeline mode with 100% time multiplexed hardware. This work proposes an area efficient multiprecision iterative mode in the SIMD systolic arrays for edge AI use cases. The design delivers superior performance with up to 62X and 371X reductions in DMA reads for input feature maps and weight filters in VGG16, with an energy efficiency of 8.42 GOPS / W within the accuracy loss of 2%. The proposed architecture supports emerging 4-bit computations for DL inference while enhancing throughput in FxP8/16 modes for transformers and other HPC applications. The proposed approach enables future energy-efficient AI accelerators in edge and cloud environments.

We present APQ for efficient deep learning inference on resource-constrained hardware. Unlike previous methods that separately search the neural architecture, pruning policy, and quantization policy, we optimize them in a joint manner. To deal with the larger design space it brings, a promising approach is to train a quantization-aware accuracy predictor to quickly get the accuracy of the quantized model and feed it to the search engine to select the best fit. However, training this quantization-aware accuracy predictor requires collecting a large number of quantized <model, accuracy> pairs, which involves quantization-aware finetuning and thus is highly time-consuming. To tackle this challenge, we propose to transfer the knowledge from a full-precision (i.e., fp32) accuracy predictor to the quantization-aware (i.e., int8) accuracy predictor, which greatly improves the sample efficiency. Besides, collecting the dataset for the fp32 accuracy predictor only requires to evaluate neural networks without any training cost by sampling from a pretrained once-for-all network, which is highly efficient. Extensive experiments on ImageNet demonstrate the benefits of our joint optimization approach. With the same accuracy, APQ reduces the latency/energy by 2x/1.3x over MobileNetV2+HAQ. Compared to the separate optimization approach (ProxylessNAS+AMC+HAQ), APQ achieves 2.3% higher ImageNet accuracy while reducing orders of magnitude GPU hours and CO2 emission, pushing the frontier for green AI that is environmental-friendly. The code and video are publicly available.

Quantization addresses the high resource demand for large language models (LLMs) by alleviating memory pressure and bandwidth congestion and providing significantly scaled compute power with a tolerable impact on accuracy. Four-bit floating point (FP4), the lowest-precision format that preserves essential numerical properties such as exponent and sign, has begun to be adopted in cutting-edge architectures, including Blackwell and AMD CDNA, to support LLM quantization and reduce deployment costs. Although aggressive quantization can yield efficiency gains, the quantization sensitivity of within-transformer layers and whether these sensitivities generalize across existing FP4 formats and model scales remain underexplored. To elucidate quantization sensitivity, this study conducts a systematic analysis of two FP4 formats, MXFP4 and NVFP4, across three Qwen2.5 model scales (0.5B, 7B, and 14B), using controlled component-wise and block-wise isolation methodologies. We observe that MLP up- and down-projection layers consistently dominate in terms of sensitivity, while gate and attention projections are moderately and substantially less sensitive to FP4 quantization, respectively. We further find that sensitivity does not universally localize to the final blocks, but early blocks can be highly sensitive, particularly under MXFP4. Our results provide a diagnostic characterization of the inference behavior of FP4 across components, depths, and FP4 formats.

Modern AI hardware, such as Nvidia's Blackwell architecture, is increasingly embracing low-precision floating-point (FP) formats to handle the pervasive activation outliers in Large Language Models (LLMs). Despite this industry trend, a unified comparison of FP and integer (INT) quantization across varying granularities has been missing, leaving algorithm and hardware co-design without clear guidance. This paper fills that gap by systematically investigating the trade-offs between FP and INT formats. We reveal a critical performance crossover: while FP excels in coarse-grained quantization, the comparison at fine-grained (block-wise) levels is more nuanced. Our comprehensive comparison demonstrates that for popular 8-bit fine-grained formats (e.g., MX with block size 32), MXINT8 is superior to its FP counterpart in both algorithmic accuracy and hardware efficiency. However, for 4-bit formats, FP (e.g., MXFP4, NVFP4) often holds an accuracy advantage , though we show that NVINT4 can surpass NVFP4 when outlier-mitigation techniques like Hadamard rotation are applied. We also introduce a symmetric clipping method that resolves gradient bias in fine-grained low-bit INT training, enabling nearly lossless performance for MXINT8 training. These findings challenge the current hardware trajectory, demonstrating that a one-size-fits-all FP approach is suboptimal and advocating that fine-grained INT formats, particularly MXINT8, offer a better balance of accuracy, power, and efficiency for future AI accelerators.

Large language models (LLMs) are rapidly increasing in size, with the number of parameters becoming a key factor in the success of many commercial models, such as ChatGPT, Claude, and Bard. Even the recently released publicly accessible models for commercial usage, such as Falcon and Llama2, come equipped with billions of parameters. This significant increase in the number of parameters makes deployment and operation very costly. The remarkable progress in the field of quantization for large neural networks in general and LLMs in particular, has made these models more accessible by enabling them to be deployed on consumer-grade GPUs. Quantized models generally demonstrate comparable performance levels to their unquantized base counterparts. Nonetheless, there exists a notable gap in our comprehensive understanding of how these quantized models respond to hyperparameters, such as temperature, max new tokens, and topk, particularly for next word prediction. The present analysis reveals that nf4 and fp4 are equally proficient 4-bit quantization techniques, characterized by similar attributes such as inference speed, memory consumption, and the quality of generated content. the study identifies nf4 as displaying greater resilience to temperature variations in the case of the llama2 series of models at lower temperature, while fp4 and fp4-dq proves to be a more suitable choice for falcon series of models. It is noteworthy that, in general, 4-bit quantized models of varying sizes exhibit higher sensitivity to temperature in the range of 0.5 to 0.8, unlike their unquantized counterparts. Additionally, int8 quantization is associated with significantly slower inference speeds, whereas unquantized bfloat16 models consistently yield the fastest inference speeds across models of all sizes.

Extreme edge platforms, such as in-vehicle smart devices, require efficient deployment of quantized deep neural networks (DNNs) to enable intelligent applications with limited amounts of energy, memory, and computing resources. However, many edge devices struggle to boost inference throughput of various quantized DNNs due to the varying quantization levels, and these devices lack floating-point (FP) support for on-device learning, which prevents them from improving model accuracy while ensuring data privacy. To tackle the challenges above, we propose a precision-scalable RISC-V DNN processor with on-device learning capability. It facilitates diverse precision levels of fixed-point DNN inference, spanning from 2-bit to 16-bit, and enhances on-device learning through improved support with FP16 operations. Moreover, we employ multiple methods such as FP16 multiplier reuse and multi-precision integer multiplier reuse, along with balanced mapping of FPGA resources, to significantly improve hardware resource utilization. Experimental results on the Xilinx ZCU102 FPGA show that our processor significantly improves inference throughput by 1.6sim14.6times and energy efficiency by 1.1sim14.6times across various DNNs, compared to the prior art, XpulpNN. Additionally, our processor achieves a 16.5times higher FP throughput for on-device learning.

Large Language Model training with 8-bit floating point (FP8) formats promises significant efficiency improvements, but reduced numerical precision makes training challenging. It is currently possible to train in FP8 only if one is willing to tune various hyperparameters, reduce model scale, or accept the overhead of computing dynamic scale factors. We demonstrate simple, scalable FP8 training that requires no dynamic scaling factors or special hyperparameters, even at large model sizes. Our method, munit Scaling (muS), also enables simple hyperparameter transfer across model widths, matched numerics across training and inference, and other desirable properties. munit Scaling is straightforward to implement, consisting of a set of minimal interventions based on a first-principles analysis of common transformer operations. We validate our method by training models from 1B to 13B parameters, performing all hidden linear layer computations in FP8. We achieve quality equal to higher precision baselines while also training up to 33% faster.

The impact of software vulnerabilities on everyday software systems is significant. Despite deep learning models being proposed for vulnerability detection, their reliability is questionable. Prior evaluations show high recall/F1 scores of up to 99%, but these models underperform in practical scenarios, particularly when assessed on entire codebases rather than just the fixing commit. This paper introduces Real-Vul, a comprehensive dataset representing real-world scenarios for evaluating vulnerability detection models. Evaluating DeepWukong, LineVul, ReVeal, and IVDetect shows a significant drop in performance, with precision decreasing by up to 95 percentage points and F1 scores by up to 91 points. Furthermore, Model performance fluctuates based on vulnerability characteristics, with better F1 scores for information leaks or code injection than for path resolution or predictable return values. The results highlight a significant performance gap that needs addressing before deploying deep learning-based vulnerability detection in practical settings. Overfitting is identified as a key issue, and an augmentation technique is proposed, potentially improving performance by up to 30%. Contributions include a dataset creation approach for better model evaluation, Real-Vul dataset, and empirical evidence of deep learning models struggling in real-world settings.

Large language models (LLMs) have significantly advanced natural language processing, but their massive parameter counts create substantial computational and memory challenges during deployment. Post-training quantization (PTQ) has emerged as a promising approach to mitigate these challenges with minimal overhead. While existing PTQ methods can effectively quantize LLMs, they experience substantial accuracy loss at extremely low bit-widths, primarily due to high-impact parameters that significantly influence quantization performance. Several approaches address these issues by identifying and retaining the high-impact parameters in FP16 format. However, they apply fixed ratios of high-impact parameters across all layers, overlooking layer-wise sensitivity variations. In this paper, we propose a quadratic optimization framework that determines layer-specific ratios of high-impact parameters while considering inter-layer dependencies. We quantize high-impact parameters to moderate bit-widths, which often result in negligible performance degradation in quantized LLMs, while the remaining parameters can be quantized to extremely low bit-widths. Under the same resource-constrained budget, this allows for preserving more high-impact parameters than methods that keep selecting a few in FP16 format. Additionally, the proposed framework allows us to leverage an advanced quantization method that often requires extensive learnable parameters solely for high-impact parameters, while applying a computationally efficient method to the rest. Our approach achieves an effective balance between computational efficiency and model accuracy while maintaining high performance compared to state-of-the-art methods.

While large language models (LLMs) have proven to be effective on a large variety of tasks, they are also known to hallucinate information. To measure whether an LLM prefers factually consistent continuations of its input, we propose a new benchmark called FIB(Factual Inconsistency Benchmark) that focuses on the task of summarization. Specifically, our benchmark involves comparing the scores an LLM assigns to a factually consistent versus a factually inconsistent summary for an input news article. For factually consistent summaries, we use human-written reference summaries that we manually verify as factually consistent. To generate summaries that are factually inconsistent, we generate summaries from a suite of summarization models that we have manually annotated as factually inconsistent. A model's factual consistency is then measured according to its accuracy, i.e.\ the proportion of documents where it assigns a higher score to the factually consistent summary. To validate the usefulness of FIB, we evaluate 23 large language models ranging from 1B to 176B parameters from six different model families including BLOOM and OPT. We find that existing LLMs generally assign a higher score to factually consistent summaries than to factually inconsistent summaries. However, if the factually inconsistent summaries occur verbatim in the document, then LLMs assign a higher score to these factually inconsistent summaries than factually consistent summaries. We validate design choices in our benchmark including the scoring method and source of distractor summaries. Our code and benchmark data can be found at https://github.com/r-three/fib.

We present a hardware-oriented description of GoldenFloat (GF), a static-split floating-point family generated by a single closed rule, and three concrete artefacts: (i) an open multi-width RTL generator covering GF4-GF256 with a continuous-integration differential sweep against a correctly-rounded reference; (ii) an integer-backed Lucas-exact accumulator path verified at 500-digit precision for n = 1, ..., 256; and (iii) a GF16 FPGA codec passing a 35-of-35 testbench at 323 MHz on Artix-7 (Xilinx XC7A35T). For each total width N >= 4, the exponent width is e = round((N-1)/phi^2) with fraction f = N-1-e and phi = (1+sqrt(5))/2. The rule reproduces the realised exponent widths of nine formats (9/9) and extends consistently to GF128, GF512, GF1024. The rule is positioned alongside posit, takum, OCP-MX, and the IEEE P3109 multi-width float draft. We make no per-rung accuracy or superiority claim against any of them. The breadth/toolchain-coherence framing is recorded as an open conjecture with a pre-registered falsification path. A falsification ledger (FL-002) records open questions and the experiments that would settle them. An RTL-correctness erratum dated 2026-05-31 is reported; the fabricated TTSKY26b dies carry the defective multiplier portfolio, and the corrected generator is the regeneration baseline.

MIDOG 2025 Track 1 requires mitosis detection in whole-slideimages (WSIs) containing non-tumor, inflamed, and necrotic re-gions. Due to the complicated and heterogeneous context, aswell as possible artifacts, there are often false positives and falsenegatives, thus degrading the detection F1-score. To addressthis problem, we propose a two-stage framework. Firstly, an im-proved YOLO11x, integrated with EMA attention and LSConv,is employed to generate mitosis candidates. We use a low confi-dence threshold to generate as many proposals as possible, en-suring the detection recall. Then, a ConvNeXt-Tiny classifieris employed to filter out the false positives, ensuring the detec-tion precision. Consequently, the proposed two-stage frame-work can generate a high detection F1-score. Evaluated on afused dataset comprising MIDOG++, MITOS_WSI_CCMCT,and MITOS_WSI_CMC, our framework achieves an F1-scoreof 0.882, which is 0.035 higher than the single-stage YOLO11xbaseline. This performance gain is produced by a significantprecision improvement, from 0.762 to 0.839, and a comparablerecall. On the MIDOG 2025 Track 1 preliminary test set, thealgorithm scores an F1 score of 0.7587. The code is available athttps://github.com/xxiao0304/MIDOG-2025-Track-1-of-SZTU.

Current language model evaluations measure what models know under ideal conditions but not how robustly they know it under realistic stress. Static benchmarks like MMLU and TruthfulQA cannot distinguish a model that lacks knowledge from one whose verification mechanisms collapse when information degrades or adversaries probe for weaknesses. We introduce the Drill-Down and Fabricate Test (DDFT), a protocol that measures epistemic robustness: a model's ability to maintain factual accuracy under progressive semantic compression and adversarial fabrication. We propose a two-system cognitive model comprising a Semantic System that generates fluent text and an Epistemic Verifier that validates factual accuracy. Our findings, based on evaluating 9 frontier models across 8 knowledge domains at 5 compression levels (1,800 turn-level evaluations), reveal that epistemic robustness is orthogonal to conventional design paradigms. Neither parameter count (r=0.083, p=0.832) nor architectural type (r=0.153, p=0.695) significantly predicts robustness, suggesting it emerges from training methodology and verification mechanisms distinct from current approaches. Error detection capability strongly predicts overall robustness (rho=-0.817, p=0.007), indicating this is the critical bottleneck. We find that flagship models exhibit brittleness despite their scale, while smaller models can achieve robust performance, challenging assumptions about the relationship between model size and reliability. The DDFT framework provides both theoretical foundation and practical tools for assessing epistemic robustness before deployment in critical applications.

Large Language Models (LLMs) today are powerful problem solvers across many domains, and they continue to get stronger as they scale in model size, training set size, and training set quality, as shown by extensive research and experimentation across the industry. Training a frontier model today requires on the order of tens to hundreds of yottaflops, which is a massive investment of time, compute, and energy. Improving pretraining efficiency is therefore essential to enable the next generation of even more capable LLMs. While 8-bit floating point (FP8) training is now widely adopted, transitioning to even narrower precision, such as 4-bit floating point (FP4), could unlock additional improvements in computational speed and resource utilization. However, quantization at this level poses challenges to training stability, convergence, and implementation, notably for large-scale models trained on long token horizons. In this study, we introduce a novel approach for stable and accurate training of large language models (LLMs) using the NVFP4 format. Our method integrates Random Hadamard transforms (RHT) to bound block-level outliers, employs a two-dimensional quantization scheme for consistent representations across both the forward and backward passes, utilizes stochastic rounding for unbiased gradient estimation, and incorporates selective high-precision layers. We validate our approach by training a 12-billion-parameter model on 10 trillion tokens -- the longest publicly documented training run in 4-bit precision to date. Our results show that the model trained with our NVFP4-based pretraining technique achieves training loss and downstream task accuracies comparable to an FP8 baseline. These findings highlight that NVFP4, when combined with our training approach, represents a major step forward in narrow-precision LLM training algorithms.

As AI-generated images proliferate across digital platforms, reliable detection methods have become critical for combating misinformation and maintaining content authenticity. While numerous deepfake detection methods have been proposed, existing benchmarks predominantly evaluate fine-tuned models, leaving a critical gap in understanding out-of-the-box performance -- the most common deployment scenario for practitioners. We present the first comprehensive zero-shot evaluation of 16 state-of-the-art detection methods, comprising 23 pretrained detector variants (due to multiple released versions of certain detectors), across 12 diverse datasets, comprising 2.6~million image samples spanning 291 unique generators including modern diffusion models. Our systematic analysis reveals striking findings: (1)~no universal winner exists, with detector rankings exhibiting substantial instability (Spearman~ρ: 0.01 -- 0.87 across dataset pairs); (2)~a 37~percentage-point performance gap separates the best detector (75.0\% mean accuracy) from the worst (37.5\%); (3)~training data alignment critically impacts generalization, causing up to 20--60\% performance variance within architecturally identical detector families; (4)~modern commercial generators (Flux~Dev, Firefly~v4, Midjourney~v7) defeat most detectors, achieving only 18--30\% average accuracy; and (5)~we identify three systematic failure patterns affecting cross-dataset generalization. Statistical analysis confirms significant performance differences between detectors (Friedman test: χ^2=121.01, p<10^{-16}, Kendall~W=0.524). Our findings challenge the ``one-size-fits-all'' detector paradigm and provide actionable deployment guidelines, demonstrating that practitioners must carefully select detectors based on their specific threat landscape rather than relying on published benchmark performance.

This paper presents a comprehensive overview of the Ultralytics YOLO(You Only Look Once) family of object detectors, focusing the architectural evolution, benchmarking, deployment perspectives, and future challenges. The review begins with the most recent release, YOLO26 (YOLOv26), which introduces key innovations including Distribution Focal Loss (DFL) removal, native NMS-free inference, Progressive Loss Balancing (ProgLoss), Small-Target-Aware Label Assignment (STAL), and the MuSGD optimizer for stable training. The progression is then traced through YOLO11, with its hybrid task assignment and efficiency-focused modules; YOLOv8, which advanced with a decoupled detection head and anchor-free predictions; and YOLOv5, which established the modular PyTorch foundation that enabled modern YOLO development. Benchmarking on the MS COCO dataset provides a detailed quantitative comparison of YOLOv5, YOLOv8, YOLO11, and YOLO26, alongside cross-comparisons with YOLOv12, YOLOv13, RT-DETR, and DEIM. Metrics including precision, recall, F1 score, mean Average Precision, and inference speed are analyzed to highlight trade-offs between accuracy and efficiency. Deployment and application perspectives are further discussed, covering export formats, quantization strategies, and real-world use in robotics, agriculture, surveillance, and manufacturing. Finally, the paper identifies challenges and future directions, including dense-scene limitations, hybrid CNN-Transformer integration, open-vocabulary detection, and edge-aware training approaches.

Measuring the accuracy of face recognition (FR) systems is essential for improving performance and ensuring responsible use. Accuracy is typically estimated using large annotated datasets, which are costly and difficult to obtain. We propose a novel method for 1:1 face verification that benchmarks FR systems quickly and without manual annotation, starting from approximate labels (e.g., from web search results). Unlike previous methods for training set label cleaning, ours leverages the embedding representation of the models being evaluated, achieving high accuracy in smaller-sized test datasets. Our approach reliably estimates FR accuracy and ranking, significantly reducing the time and cost of manual labeling. We also introduce the first public benchmark of five FR cloud services, revealing demographic biases, particularly lower accuracy for Asian women. Our rapid test method can democratize FR testing, promoting scrutiny and responsible use of the technology. Our method is provided as a publicly accessible tool at https://github.com/caltechvisionlab/frt-rapid-test

The emergence of large language models (LLMs) like GPT-4 has revolutionized natural language processing (NLP), enabling diverse, complex tasks. However, extensive token counts lead to high computational and financial burdens. To address this, we propose Efficient and Flexible Prompt Compression (EFPC), a novel method unifying task-aware and task-agnostic compression for a favorable accuracy-efficiency trade-off. EFPC uses GPT-4 to generate compressed prompts and integrates them with original prompts for training. During training and inference, we selectively prepend user instructions and compress prompts based on predicted probabilities. EFPC is highly data-efficient, achieving significant performance with minimal data. Compared to the state-of-the-art method LLMLingua-2, EFPC achieves a 4.8% relative improvement in F1-score with 1% additional data at a 4x compression rate, and an 11.4% gain with 10% additional data on the LongBench single-doc QA benchmark. EFPC's unified framework supports broad applicability and enhances performance across various models, tasks, and domains, offering a practical advancement in NLP.

We propose LLM-FP4 for quantizing both weights and activations in large language models (LLMs) down to 4-bit floating-point values, in a post-training manner. Existing post-training quantization (PTQ) solutions are primarily integer-based and struggle with bit widths below 8 bits. Compared to integer quantization, floating-point (FP) quantization is more flexible and can better handle long-tail or bell-shaped distributions, and it has emerged as a default choice in many hardware platforms. One characteristic of FP quantization is that its performance largely depends on the choice of exponent bits and clipping range. In this regard, we construct a strong FP-PTQ baseline by searching for the optimal quantization parameters. Furthermore, we observe a high inter-channel variance and low intra-channel variance pattern in activation distributions, which adds activation quantization difficulty. We recognize this pattern to be consistent across a spectrum of transformer models designed for diverse tasks, such as LLMs, BERT, and Vision Transformer models. To tackle this, we propose per-channel activation quantization and show that these additional scaling factors can be reparameterized as exponential biases of weights, incurring a negligible cost. Our method, for the first time, can quantize both weights and activations in the LLaMA-13B to only 4-bit and achieves an average score of 63.1 on the common sense zero-shot reasoning tasks, which is only 5.8 lower than the full-precision model, significantly outperforming the previous state-of-the-art by 12.7 points. Code is available at: https://github.com/nbasyl/LLM-FP4.

How much do large language models actually hallucinate when answering questions grounded in provided documents? Despite the critical importance of this question for enterprise AI deployments, reliable measurement has been hampered by benchmarks that rely on static datasets vulnerable to contamination, LLM-based judges with documented biases, or evaluation scales too small for statistical confidence. We address this gap using RIKER, a ground-truth-first evaluation methodology that enables deterministic scoring without human annotation. Across 35 open-weight models, three context lengths (32K, 128K, and 200K tokens), four temperature settings, and three hardware platforms (NVIDIA H200, AMD MI300X, and Intel Gaudi 3), we conducted over 172 billion tokens of evaluation - an order of magnitude beyond prior work. Our findings reveal that: (1) even the best-performing models fabricate answers at a non-trivial rate - 1.19% at best at 32K, with top-tier models at 5 - 7% - and fabrication rises steeply with context length, nearly tripling at 128K and exceeding 10% for all models at 200K; (2) model selection dominates all other factors, with overall accuracy spanning a 72-percentage-point range and model family predicting fabrication resistance better than model size; (3) temperature effects are nuanced - T=0.0 yields the best overall accuracy in roughly 60% of cases, but higher temperatures reduce fabrication for the majority of models and dramatically reduce coherence loss (infinite generation loops), which can reach 48x higher rates at T=0.0 versus T=1.0; (4) grounding ability and fabrication resistance are distinct capabilities - models that excel at finding facts may still fabricate facts that do not exist; and (5) results are consistent across hardware platforms, confirming that deployment decisions need not be hardware-dependent.

Noise plagues many numerical datasets, where the recorded values in the data may fail to match the true underlying values due to reasons including: erroneous sensors, data entry/processing mistakes, or imperfect human estimates. We consider general regression settings with covariates and a potentially corrupted response whose observed values may contain errors. By accounting for various uncertainties, we introduced veracity scores that distinguish between genuine errors and natural data fluctuations, conditioned on the available covariate information in the dataset. We propose a simple yet efficient filtering procedure for eliminating potential errors, and establish theoretical guarantees for our method. We also contribute a new error detection benchmark involving 5 regression datasets with real-world numerical errors (for which the true values are also known). In this benchmark and additional simulation studies, our method identifies incorrect values with better precision/recall than other approaches.

FP4 training promises substantial reductions in memory and computation cost for LLM pretraining, yet current FP4 hardware paths and recipes, including NVIDIA Blackwell/Rubin-class systems and AMD MI350-series GPUs, remain centered on E2M1 data elements. In this study, we identify a fundamental limitation of that choice: non-uniform formats such as E2M1 inherently suffer from Shrinkage Bias, a systematic negative rounding error caused by the geometric asymmetry of their representable bins. We show that this bias accumulates multiplicatively across layers and is amplified by the Random Hadamard Transform (RHT), providing a unified explanation for the training instability observed in existing E2M1-based FP4 recipes. In contrast, uniform grids (E1M2/INT4) bypass this grid-geometry error and better convert the improved bucket utilization from RHT into higher quantization quality. Based on this finding, we propose UFP4, a uniform 4-bit training recipe that applies RHT to all three training GEMMs while restricting stochastic rounding to dY alone. On Dense 1.5B, MoE 7.9B, and MoE 124B long-run pretraining, UFP4 consistently achieves lower BF16-relative loss degradation than strong E2M1-based baselines, supported by scaling-law analysis and ablation studies. Our results suggest that future accelerators should support E1M2/INT4-style uniform 4-bit grids as first-class training primitives alongside E2M1.

Recent advances in optical flow estimation have prioritized accuracy at the cost of growing GPU memory consumption, particularly for high-resolution (FullHD) inputs. We introduce MEMFOF, a memory-efficient multi-frame optical flow method that identifies a favorable trade-off between multi-frame estimation and GPU memory usage. Notably, MEMFOF requires only 2.09 GB of GPU memory at runtime for 1080p inputs, and 28.5 GB during training, which uniquely positions our method to be trained at native 1080p without the need for cropping or downsampling. We systematically revisit design choices from RAFT-like architectures, integrating reduced correlation volumes and high-resolution training protocols alongside multi-frame estimation, to achieve state-of-the-art performance across multiple benchmarks while substantially reducing memory overhead. Our method outperforms more resource-intensive alternatives in both accuracy and runtime efficiency, validating its robustness for flow estimation at high resolutions. At the time of submission, our method ranks first on the Spring benchmark with a 1-pixel (1px) outlier rate of 3.289, leads Sintel (clean) with an endpoint error (EPE) of 0.963, and achieves the best Fl-all error on KITTI-2015 at 2.94%. The code is available at https://github.com/msu-video-group/memfof.

Single-prompt accuracy is the dominant way to benchmark language models, but it can miss reliability failures that matter. We evaluate a 15-model open-weight corpus, with the main reliability analyses focused on 10 instruct models across five classification and reasoning benchmarks under five prompt variants each, measuring accuracy, token-probability calibration, verbal-confidence calibration, verbal parse rate, and prompt-perturbation spread for every (model x dataset x variant) cell. We find three broad results. First, evaluation design can materially change the conclusion. Switching Expected Calibration Error (ECE) token from a raw to a label-set-normalised definition changes per-cell calibration by a mean absolute 0.149. More strikingly, pairing a chain-of-thought prompt with a first-character evaluator on ARC-Challenge reduces apparent accuracy by 72-88% across all five primary models; two independent repair procedures recover 93.8% and 102.7% of the lost performance, indicating an evaluator-side rather than model-side failure. Second, confidence signals are fragile. On MMLU-Pro, every primary model verbally reports confidence substantially above both its accuracy and its token-probability confidence on the same rows, and verbal parse rate can collapse for a single model on a single prompt variant. Third, prompt robustness does not track parameter count reliably. Across 10 instruct models, the correlation between model size and prompt-perturbation spread ranges from -0.244 to 0.474 across benchmarks. Taken together, these results show that reliability conclusions for small language models depend not only on the model being evaluated, but also on the evaluation pipeline used to measure it. We argue that calibration definitions, evaluator logic, verbal parseability, and prompt robustness should be reported explicitly when making reliability claims.

The demand for inference on extremely large scale LLMs has seen enormous growth in the recent months. It made evident the colossal shortage of dedicated hardware capable of efficient and fast processing of the involved compute and memory movement. The problem is aggravated by the exploding raise in the lengths of the sequences being processed, since those require efficient on-chip storage of the KV-cache of size proportional to the sequence length. To make the required compute feasible and fit the involved data into available memory, numerous quantization techniques have been proposed that allow accurate quantization for both weights and activations. One of the main recent breakthroughs in this direction was introduction of the family of Block Floating Point (BFP) formats characterized by a block of mantissas with a shared scale factor. These enable memory- power-, and compute- efficient hardware support of the tensor operations and provide extremely good quantization accuracy. The main issues preventing widespread application of block formats is caused by the presence of outliers in weights and activations since those affect the accuracy of the other values in the same block. In this paper, we focus on the most critical problem of limited KV-cache storage. We propose a novel approach enabling usage of low precision BFP formats without compromising the resulting model accuracy. We exploit the common channel-wise patterns exhibited by the outliers to rearrange them in such a way, that their quantization quality is significantly improved. The methodology yields 2x savings in the memory footprint without significant degradation of the model's accuracy. Importantly, the rearrangement of channels happens at the compile time and thus has no impact on the inference latency.

Enabling On-Device Learning (ODL) for Ultra-Low-Power Micro-Controller Units (MCUs) is a key step for post-deployment adaptation and fine-tuning of Deep Neural Network (DNN) models in future TinyML applications. This paper tackles this challenge by introducing a novel reduced precision optimization technique for ODL primitives on MCU-class devices, leveraging the State-of-Art advancements in RISC-V RV32 architectures with support for vectorized 16-bit floating-point (FP16) Single-Instruction Multiple-Data (SIMD) operations. Our approach for the Forward and Backward steps of the Back-Propagation training algorithm is composed of specialized shape transform operators and Matrix Multiplication (MM) kernels, accelerated with parallelization and loop unrolling. When evaluated on a single training step of a 2D Convolution layer, the SIMD-optimized FP16 primitives result up to 1.72times faster than the FP32 baseline on a RISC-V-based 8+1-core MCU. An average computing efficiency of 3.11 Multiply and Accumulate operations per clock cycle (MAC/clk) and 0.81 MAC/clk is measured for the end-to-end training tasks of a ResNet8 and a DS-CNN for Image Classification and Keyword Spotting, respectively -- requiring 17.1 ms and 6.4 ms on the target platform to compute a training step on a single sample. Overall, our approach results more than two orders of magnitude faster than existing ODL software frameworks for single-core MCUs and outperforms by 1.6 times previous FP32 parallel implementations on a Continual Learning setup.

The increasing computational demands of foundation models have spurred research into low-precision training, with 4-bit floating-point (FP4) formats emerging as a frontier for maximizing hardware throughput. While numerous techniques have been proposed to stabilize FP4 training, they often present isolated solutions with varying, and not always clear, computational overheads. This paper aims to provide a unified view of the design space of FP4 training. We introduce a comprehensive, quantisation gradient-based framework for microscaling quantization that allows for a theoretical analysis of the computational costs associated with different stabilization methods on both the forward and backward passes. Using a simulator built on this framework, we conduct an extensive empirical study across a wide range of machine learning tasks, including regression, image classification, diffusion models, and language models. By systematically evaluating thousands of combinations of techniques, such as novel gradient approximations, rounding strategies, and scaling methods, we identify which configurations offer the most favourable performance-to-overhead trade-off. We find that the techniques enabling the best trade-off involve carefully combining Hadamard transformations, tensor scaling and stochastic rounding. We further find that using UE5M3 as a scaling factor potentially offers a good compromise between range and precision with manageable computational overhead.

As large language models have grown larger, interest has grown in low-precision numerical formats such as NVFP4 as a way to improve speed and reduce memory usage. However, quantizing models to NVFP4 remains difficult as the lack of precision generally degrades model performance. In this work, we address this issue with Four Over Six (4/6), a modification to the block-scaled NVFP4 quantization algorithm that yields reduced quantization error. Unlike integer formats, floating point formats have non-uniform step sizes which create larger quantization error on larger values. 4/6 takes advantage of this by adaptively scaling some blocks to smaller FP4 values, making the distribution of representable values more uniform and reducing quantization error for near-maximal values. We show that 4/6 can be implemented efficiently on NVIDIA Blackwell GPUs, resulting in performance gains during both pre-training and inference with minimal computational overhead. In pre-training experiments with the Nemotron 3 Nano 30B-A3B model architecture, we find that 4/6 brings training loss closer to BF16 compared to models trained with current state-of-the-art NVFP4 training recipes. Our code is available at http://github.com/mit-han-lab/fouroversix.

Despite the popularity of large language model (LLM) quantization for inference acceleration, significant uncertainty remains regarding the accuracy-performance trade-offs associated with various quantization formats. We present a comprehensive empirical study of quantized accuracy, evaluating popular quantization formats (FP8, INT8, INT4) across academic benchmarks and real-world tasks, on the entire Llama-3.1 model family. Additionally, our study examines the difference in text generated by quantized models versus their uncompressed counterparts. Beyond benchmarks, we also present a couple of quantization improvements which allowed us to obtain state-of-the-art accuracy recovery results. Our investigation, encompassing over 500,000 individual evaluations, yields several key findings: (1) FP8 weight and activation quantization (W8A8-FP) is lossless across all model scales, (2) INT8 weight and activation quantization (W8A8-INT), when properly tuned, incurs surprisingly low 1-3% accuracy degradation, and (3) INT4 weight-only quantization (W4A16-INT) is competitive with 8-bit integer weight and activation quantization. To address the question of the "best" format for a given deployment environment, we conduct inference performance analysis using the popular open-source vLLM framework on various GPU architectures. We find that W4A16 offers the best cost-efficiency for synchronous deployments, and for asynchronous deployment on mid-tier GPUs. At the same time, W8A8 formats excel in asynchronous "continuous batching" deployment of mid- and large-size models on high-end GPUs. Our results provide a set of practical guidelines for deploying quantized LLMs across scales and performance requirements.

Ask a pretrained biomedical language model whether "cortisol 28 ug/dL" and "stock-market volatility" are related, and it returns a cosine similarity of 0.83 on a scale where 1.0 means identical. The two share no mechanism. This is not a corner case: every off-the-shelf biomedical encoder we tested (BioBERT, PubMedBERT, BioM-ELECTRA) scores unrelated cross-domain pairs between 0.76 and 0.92 when the answer should be near zero. Accuracy on cross-domain discrimination is 0%. Retrieval systems survive this, because a language model downstream filters the noise. A Large Behavioural Model (LBM), a foundation model whose subject is a person rather than a sentence, does not: it reasons over a graph of a user's life and treats embedding proximity as evidence that two events are causally linked. False proximity writes a false causal edge, and everything downstream inherits the error. Here, embedding geometry is not a tuning knob; it is correctness. We report the fix. A contrastive pass over 72,034 pairs raises PubMedBERT BIOSSES correlation from 0.633 to 0.828 and within-vs-across-domain separation from 1.05x to 1.63x. A second pass, BODHI, mines hard negatives from edges absent in a biomedical knowledge graph and lifts separation to 2.30x and the discrimination gap to +0.392, at a 4.5% BIOSSES cost. On an Intel Xeon 6737P with AMX, OpenVINO cuts single-query latency from 1367 ms to 10 ms (133x) and reaches 555 sentences/sec. One finding contradicts standard advice: FP16 beats INT8 on this silicon at every serving batch size, and we explain why. The same model on a no-AMX Ice Lake instance runs 13-27x slower. We release the benchmark suite, training corpora, the BODHI generator, and the OpenVINO scripts.

Accurate translation from Natural Language to First-Order Logic (NL-to-FOL) underpins neurosymbolic AI systems and Natural Language Inference (NLI), making the quality of NL-to-FOL benchmarks essential -- yet these datasets have never been rigorously audited. Our first contribution is to present a systematic human inspection of the validation split of FOLIO and a subset of MALLS test instances, finding that approximately 39% and 36% of entries, respectively, contain incorrect FOL formalizations (i.e., ground truth labels), with additional rates of ambiguous NL sentences (16.4% and 48%) and incorrect NLI labels in FOLIO (8.4%). Our second contribution is to develop and release corrected ground truths for such datasets, showing that annotation errors distort model evaluation on a reference benchmark task: testing three state-of-the-art LLMs (Gemma~4 31B-it, Qwen3-30B-A3B, and GPT-4o-mini) with the corrected ground truths yields accuracy gains from +9 to +22 percentage points. Motivated by these findings, we propose an LLM-based framework to support humans in manual reviewing NL-to-FOL datasets. By directing reviewers toward the most error-prone instances, we empirically show that it is possible to achieve 90% dataset accuracy after reviewing fewer than 24% of instances, compared to over 70% required by unguided review. We release all human-verified annotations and the code for our framework.

FP8 training has emerged as a promising method for improving training efficiency. Existing frameworks accelerate training by applying FP8 computation to linear layers while leaving optimizer states and activations in higher precision, which fails to fully optimize memory usage. This paper introduces COAT (Compressing Optimizer States and Activations for FP8 Training), a novel FP8 training framework designed to significantly reduce memory footprint when training large models. COAT addresses current limitations through two key innovations: (1) Dynamic Range Expansion, which aligns optimizer state distributions more closely with the FP8 representation range, thereby reducing quantization error, and (2) Mixed-Granularity Activation Quantization, which optimizes activation memory using a combination of per-tensor and per-group quantization strategies. Experiments demonstrate that COAT effectively reduces end-to-end training memory footprint by 1.54x compared to BF16 while achieving nearly lossless performance across various tasks, such as Large Language Model pretraining and fine-tuning and Vision Language Model training. COAT also achieves a 1.43x end-to-end training speedup compared to BF16, performing on par with or surpassing TransformerEngine's speedup. COAT enables efficient full-parameter training of large models on fewer GPUs, and facilitates doubling the batch size in distributed training settings, providing a practical solution for scaling large-scale model training. The code is available at https://github.com/NVlabs/COAT.

As of today, the best accuracy in line segment detection (LSD) is achieved by algorithms based on convolutional neural networks - CNNs. Unfortunately, these methods utilize deep, heavy networks and are slower than traditional model-based detectors. In this paper we build an accurate yet fast CNN- based detector, LSDNet, by incorporating a lightweight CNN into a classical LSD detector. Specifically, we replace the first step of the original LSD algorithm - construction of line segments heatmap and tangent field from raw image gradients - with a lightweight CNN, which is able to calculate more complex and rich features. The second part of the LSD algorithm is used with only minor modifications. Compared with several modern line segment detectors on standard Wireframe dataset, the proposed LSDNet provides the highest speed (among CNN-based detectors) of 214 FPS with a competitive accuracy of 78 Fh . Although the best-reported accuracy is 83 Fh at 33 FPS, we speculate that the observed accuracy gap is caused by errors in annotations and the actual gap is significantly lower. We point out systematic inconsistencies in the annotations of popular line detection benchmarks - Wireframe and York Urban, carefully reannotate a subset of images and show that (i) existing detectors have improved quality on updated annotations without retraining, suggesting that new annotations correlate better with the notion of correct line segment detection; (ii) the gap between accuracies of our detector and others diminishes to negligible 0.2 Fh , with our method being the fastest.

While there are numerous benchmarks comparing the performance of modern language models (LMs), end-task evaluations often conflate notions of *factual accuracy* ("truth") and *reasoning ability* ("rationality", or "honesty" in the sense of correctly reporting implications of beliefs). Our goal is a dataset that clearly distinguishes these two notions. Our approach is to leverage and extend a collection of human-annotated *entailment trees*, engineered to express both good and bad chains of reasoning, and using a mixture of true and false facts, in particular including counterfactual examples, to avoid belief bias (also known as the "content effect"). The resulting dataset, called BaRDa, contains 3000 entailments (1787 valid, 1213 invalid), using 6681 true and 2319 false statements. Testing on four GPT-series models, GPT3(curie)/GPT3(davinici)/3.5/4, we find factual accuracy (truth) scores of 74.1/80.6/82.6/87.1 and reasoning accuracy scores of 63.1/78.0/71.8/79.2. This shows the clear progression of models towards improved factual accuracy and entailment reasoning, and the dataset provides a new benchmark that more cleanly separates and quantifies these two notions.

A well-calibrated model should express confidence that matches its actual accuracy -- when it claims 80\% confidence, it should be correct 80\% of the time. While large language models (LLMs) have achieved remarkable performance across diverse tasks, their epistemic calibration remains poorly understood. We introduce KalshiBench, a benchmark of 300 prediction market questions from Kalshi, a CFTC-regulated exchange, with verifiable real-world outcomes occurring after model training cutoffs. Unlike traditional benchmarks measuring accuracy on static knowledge, KalshiBench evaluates whether models can appropriately quantify uncertainty about genuinely unknown future events. We evaluate five frontier models -- Claude Opus 4.5, GPT-5.2, DeepSeek-V3.2, Qwen3-235B, and Kimi-K2 -- and find systematic overconfidence across all models. Even the best-calibrated model (Claude Opus 4.5, ECE=0.120) shows substantial calibration errors, while reasoning-enhanced models like GPT-5.2-XHigh exhibit worse calibration (ECE=0.395) despite comparable accuracy. Critically, only one model achieves a positive Brier Skill Score, indicating most models perform worse than simply predicting base rates. Our findings suggest that scaling and enhanced reasoning do not automatically confer calibration benefits, highlighting epistemic calibration as a distinct capability requiring targeted development.

In this paper, we describe a feedforward artificial neural network trained on the ImageNet 2012 contest dataset [7] with the new method of [5] to an accuracy rate of 98.3% with a 99.69 Top-1 rate, and an average of 285.9 labels that are perfectly classified over the 10 batch partitions of the dataset. The best performing model uses 322,430,160 parameters, with 4 decimal places precision. We conjecture that the reason our model does not achieve a 100% accuracy rate is due to a double-labeling problem, by which there are duplicate images in the dataset with different labels.

Fact verification aims to verify a claim using evidence from a trustworthy knowledge base. To address this challenge, algorithms must produce features for every claim that are both semantically meaningful, and compact enough to find a semantic alignment with the source information. In contrast to previous work, which tackled the alignment problem by learning over annotated corpora of claims and their corresponding labels, we propose SFAVEL (Self-supervised Fact Verification via Language Model Distillation), a novel unsupervised pretraining framework that leverages pre-trained language models to distil self-supervised features into high-quality claim-fact alignments without the need for annotations. This is enabled by a novel contrastive loss function that encourages features to attain high-quality claim and evidence alignments whilst preserving the semantic relationships across the corpora. Notably, we present results that achieve a new state-of-the-art on FB15k-237 (+5.3% Hits@1) and FEVER (+8% accuracy) with linear evaluation.

As recently demonstrated, Deep Neural Networks (DNN), usually trained using single precision IEEE 754 floating point numbers (binary32), can also work using lower precision. Therefore, 16-bit and 8-bit compressed format have attracted considerable attention. In this paper, we focused on two families of formats that have already achieved interesting results in compressing binary32 numbers in machine learning applications, without sensible degradation of the accuracy: bfloat and posit. Even if 16-bit and 8-bit bfloat/posit are routinely used for reducing the storage of the weights/biases of trained DNNs, the inference still often happens on the 32-bit FPU of the CPU (especially if GPUs are not available). In this paper we propose a way to decompress a tensor of bfloat/posits just before computations, i.e., after the compressed operands have been loaded within the vector registers of a vector capable CPU, in order to save bandwidth usage and increase cache efficiency. Finally, we show the architectural parameters and considerations under which this solution is advantageous with respect to the uncompressed one.

Automated fact checking with large language models (LLMs) offers a scalable alternative to manual verification. Evaluating fact checking is challenging as existing benchmark datasets often include post claim analysis and annotator cues, which are absent in real world scenarios where claims are fact checked immediately after being made. This limits the realism of current evaluations. We present Politi Fact Only (PFO), a 5 class benchmark dataset of 2,982 political claims from politifact.com, where all post claim analysis and annotator cues have been removed manually. This ensures that models are evaluated using only the information that would have been available prior to the claim's verification. Evaluating LLMs on PFO, we see an average performance drop of 22% in terms of macro f1 compared to PFO's unfiltered version. Based on the identified challenges of the existing LLM based fact checking system, we propose RAV (Recon Answer Verify), an agentic framework with three agents: question generator, answer generator, and label generator. Our pipeline iteratively generates and answers sub questions to verify different aspects of the claim before finally generating the label. RAV generalizes across domains and label granularities, and it outperforms state of the art approaches on well known baselines RAWFC (fact checking, 3 class) by 25.28%, and on HOVER (encyclopedia, 2 class) by 1.54% on 2 hop, 4.94% on 3 hop, and 1.78% on 4 hop, sub categories respectively. RAV shows the least performance drop compared to baselines of 16.3% in macro f1 when we compare PFO with its unfiltered version.

Devising indicative evaluation metrics for the image generation task remains an open problem. The most widely used metric for measuring the similarity between real and generated images has been the Fr\'echet Inception Distance (FID) score. Because it does not differentiate the fidelity and diversity aspects of the generated images, recent papers have introduced variants of precision and recall metrics to diagnose those properties separately. In this paper, we show that even the latest version of the precision and recall metrics are not reliable yet. For example, they fail to detect the match between two identical distributions, they are not robust against outliers, and the evaluation hyperparameters are selected arbitrarily. We propose density and coverage metrics that solve the above issues. We analytically and experimentally show that density and coverage provide more interpretable and reliable signals for practitioners than the existing metrics. Code: https://github.com/clovaai/generative-evaluation-prdc.

BigCloneBench is a well-known and widely used large-scale dataset for the evaluation of recall of clone detection tools. It has been beneficial for research on clone detection and has become a standard in evaluating the performance of clone detection tools. More recently, it has also been widely used as a dataset to evaluate machine learning approaches to semantic clone detection or code similarity detection for functional or semantic similarity. This paper demonstrates that BigCloneBench is problematic to use as ground truth for learning or evaluating semantic code similarity, and highlights the aspects of BigCloneBench that affect the ground truth quality. A manual investigation of a statistically significant random sample of 406 Weak Type-3/Type-4 clone pairs revealed that 93% of them do not have a similar functionality and are therefore mislabelled. In a literature review of 179 papers that use BigCloneBench as a dataset, we found 139 papers that used BigCloneBench to evaluate semantic clone detection and where the results are threatened in their validity by the mislabelling. As such, these papers often report high F1 scores (e.g., above 0.9), which indicates overfitting to dataset-specific artefacts rather than genuine semantic similarity detection. We emphasise that using BigCloneBench remains valid for the intended purpose of evaluating syntactic or textual clone detection of Type-1, Type-2, and Type-3 clones. We acknowledge the important contributions of BigCloneBench to two decades of traditional clone detection research. However, the usage of BigCloneBench beyond the intended purpose without careful consideration of its limitations has led to misleading results and conclusions, and potentially harmed the field of semantic clone detection.

The YOLO community has been in high spirits since our first two releases! By the advent of Chinese New Year 2023, which sees the Year of the Rabbit, we refurnish YOLOv6 with numerous novel enhancements on the network architecture and the training scheme. This release is identified as YOLOv6 v3.0. For a glimpse of performance, our YOLOv6-N hits 37.5% AP on the COCO dataset at a throughput of 1187 FPS tested with an NVIDIA Tesla T4 GPU. YOLOv6-S strikes 45.0% AP at 484 FPS, outperforming other mainstream detectors at the same scale (YOLOv5-S, YOLOv8-S, YOLOX-S and PPYOLOE-S). Whereas, YOLOv6-M/L also achieve better accuracy performance (50.0%/52.8% respectively) than other detectors at a similar inference speed. Additionally, with an extended backbone and neck design, our YOLOv6-L6 achieves the state-of-the-art accuracy in real-time. Extensive experiments are carefully conducted to validate the effectiveness of each improving component. Our code is made available at https://github.com/meituan/YOLOv6.

Post-training quantization (PTQ) is crucial for deploying efficient object detection models, like YOLO, on resource-constrained devices. However, the impact of reduced precision on model robustness to real-world input degradations such as noise, blur, and compression artifacts is a significant concern. This paper presents a comprehensive empirical study evaluating the robustness of YOLO models (nano to extra-large scales) across multiple precision formats: FP32, FP16 (TensorRT), Dynamic UINT8 (ONNX), and Static INT8 (TensorRT). We introduce and evaluate a degradation-aware calibration strategy for Static INT8 PTQ, where the TensorRT calibration process is exposed to a mix of clean and synthetically degraded images. Models were benchmarked on the COCO dataset under seven distinct degradation conditions (including various types and levels of noise, blur, low contrast, and JPEG compression) and a mixed-degradation scenario. Results indicate that while Static INT8 TensorRT engines offer substantial speedups (~1.5-3.3x) with a moderate accuracy drop (~3-7% mAP50-95) on clean data, the proposed degradation-aware calibration did not yield consistent, broad improvements in robustness over standard clean-data calibration across most models and degradations. A notable exception was observed for larger model scales under specific noise conditions, suggesting model capacity may influence the efficacy of this calibration approach. These findings highlight the challenges in enhancing PTQ robustness and provide insights for deploying quantized detectors in uncontrolled environments. All code and evaluation tables are available at https://github.com/AllanK24/QRID.

Benchmarks like MMLU suggest flagship language models approach factuality saturation above 90\%. LLMpedia shows this picture is incomplete. We materialize {sim}1.3M encyclopedia articles entirely from parametric memory across three model families, then audit every claim against Wikipedia and curated web evidence. For gpt-5-mini, the verifiable true rate is 68.4\% on Wikipedia-covered subjects - more than 21\,pp below MMLU - and the gap is driven by unverifiability (30.5\%), not refutation (1.2\%). Beyond Wikipedia, frontier articles audited against curated web evidence reach 57.6\%; Wikipedia covers only 56.7\% of model-surfaced subjects, and three model families overlap in just 7.3\% of subject choices. In a retrieval-trap benchmark inspired by prior analysis of Grokipedia, LLMpedia is more factual at roughly half the textual similarity to Wikipedia. Every prompt, article, and verdict is released. Data, code, interface: https://llmpedia.net.

The remarkable advancements in Multimodal Large Language Models (MLLMs) have not rendered them immune to challenges, particularly in the context of handling deceptive information in prompts, thus producing hallucinated responses under such conditions. To quantitatively assess this vulnerability, we present MAD-Bench, a carefully curated benchmark that contains 850 test samples divided into 6 categories, such as non-existent objects, count of objects, spatial relationship, and visual confusion. We provide a comprehensive analysis of popular MLLMs, ranging from GPT-4V, Gemini-Pro, to open-sourced models, such as LLaVA-1.5 and CogVLM. Empirically, we observe significant performance gaps between GPT-4V and other models; and previous robust instruction-tuned models, such as LRV-Instruction and LLaVA-RLHF, are not effective on this new benchmark. While GPT-4V achieves 75.02% accuracy on MAD-Bench, the accuracy of any other model in our experiments ranges from 5% to 35%. We further propose a remedy that adds an additional paragraph to the deceptive prompts to encourage models to think twice before answering the question. Surprisingly, this simple method can even double the accuracy; however, the absolute numbers are still too low to be satisfactory. We hope MAD-Bench can serve as a valuable benchmark to stimulate further research to enhance models' resilience against deceptive prompts.

Synthetic data generated by large language models has become integral to modern NLP training pipelines, from bootstrapping reasoning capabilities to augmenting instruction-following datasets. While recent work demonstrates successful applications maintaining high external data ratios, systematic understanding of how synthetic data proportion affects model behavior across different scales remains limited. This paper presents a controlled empirical study examining model performance, calibration, and output characteristics when trained on varying synthetic-to-external data ratios. Using the Pythia model suite (410M-12B parameters) across five diverse tasks, we evaluate models after one to three training iterations with synthetic data proportions ranging from 0-50\%. Our key findings include: models maintain stable performance with up to 20\% synthetic data, but degradation accelerates beyond 30\%; larger models (6.9B-12B) show greater robustness to synthetic data than smaller models (410M-1.4B); calibration degradation precedes accuracy loss, providing an early warning signal; and task characteristics matter, with reasoning tasks degrading faster than retrieval tasks under synthetic data training. Importantly, we find that current best practices, such as those employed in STaR and Self-Instruct systems that maintain greater than 80\% external data, operate well within safe regimes identified by our experiments. We provide practical guidance for practitioners on synthetic data budgets based on model scale and task requirements, alongside detailed comparison with concurrent work including Shumailov et al.'s model collapse findings.

Understanding how language model capabilities transfer from pretraining to supervised fine-tuning (SFT) is fundamental to efficient model development and data curation. In this work, we investigate four core questions: RQ1. To what extent do accuracy and confidence rankings established during pretraining persist after SFT? RQ2. Which benchmarks serve as robust cross-stage predictors and which are unreliable? RQ3. How do transfer dynamics shift with model scale? RQ4. How well does model confidence align with accuracy, as a measure of calibration quality? Does this alignment pattern transfer across training stages? We address these questions through a suite of correlation protocols applied to accuracy and confidence metrics across diverse data mixtures and model scales. Our experiments reveal that transfer reliability varies dramatically across capability categories, benchmarks, and scales -- with accuracy and confidence exhibiting distinct, sometimes opposing, scaling dynamics. These findings shed light on the complex interplay between pretraining decisions and downstream outcomes, providing actionable guidance for benchmark selection, data curation, and efficient model development.

This study presents a systematic comparison between hybrid quantum-classical neural networks and purely classical models across three benchmark datasets (MNIST, CIFAR100, and STL10) to evaluate their performance, efficiency, and robustness. The hybrid models integrate parameterized quantum circuits with classical deep learning architectures, while the classical counterparts use conventional convolutional neural networks (CNNs). Experiments were conducted over 50 training epochs for each dataset, with evaluations on validation accuracy, test accuracy, training time, computational resource usage, and adversarial robustness (tested with epsilon=0.1 perturbations).Key findings demonstrate that hybrid models consistently outperform classical models in final accuracy, achieving {99.38\% (MNIST), 41.69\% (CIFAR100), and 74.05\% (STL10) validation accuracy, compared to classical benchmarks of 98.21\%, 32.25\%, and 63.76\%, respectively. Notably, the hybrid advantage scales with dataset complexity, showing the most significant gains on CIFAR100 (+9.44\%) and STL10 (+10.29\%). Hybrid models also train 5--12times faster (e.g., 21.23s vs. 108.44s per epoch on MNIST) and use 6--32\% fewer parameters} while maintaining superior generalization to unseen test data.Adversarial robustness tests reveal that hybrid models are significantly more resilient on simpler datasets (e.g., 45.27\% robust accuracy on MNIST vs. 10.80\% for classical) but show comparable fragility on complex datasets like CIFAR100 (sim1\% robustness for both). Resource efficiency analyses indicate that hybrid models consume less memory (4--5GB vs. 5--6GB for classical) and lower CPU utilization (9.5\% vs. 23.2\% on average).These results suggest that hybrid quantum-classical architectures offer compelling advantages in accuracy, training efficiency, and parameter scalability, particularly for complex vision tasks.

Large language models deliver strong reasoning and tool-use skills, yet their computational demands make them impractical for edge or cost-sensitive deployments. We present Xmodel-2.5, a 1.3-billion-parameter small language model designed as a drop-in agent core. Training with maximal-update parameterization (μP) allows hyper-parameters tuned on a 20M-parameter proxy to transfer directly to the full model, even under the parameter-tied tie-word-embedding architecture. A 1.4T-token Warmup--Stable--Decay curriculum is used, and we further show that switching from AdamW to Muon during the decay phase improves the 13-task reasoning average by 4.58\,\% while keeping every other hyper-parameter fixed, verifying that early AdamW stability can be paired with late Muon sharpening for better downstream performance. FP8-mixed-precision training balances accuracy and throughput. All checkpoints, recipes, and evaluation code are released under the Apache-2.0 license.https://huggingface.co/XiaoduoAILab/Xmodel-2.5 and https://huggingface.co/XiaoduoAILab/Xmodel-2.5-history (training checkpoints). Training code and evaluation harness: https://github.com/XiaoduoAILab/Xmodel-2.5.

We have tried to reproduce the results of the paper "Natural Language Inference over Interaction Space" submitted to ICLR 2018 conference as part of the ICLR 2018 Reproducibility Challenge. Initially, we were not aware that the code was available, so we started to implement the network from scratch. We have evaluated our version of the model on Stanford NLI dataset and reached 86.38% accuracy on the test set, while the paper claims 88.0% accuracy. The main difference, as we understand it, comes from the optimizers and the way model selection is performed.

Large models training is plagued by the intense compute cost and limited hardware memory. A practical solution is low-precision representation but is troubled by loss in numerical accuracy and unstable training rendering the model less useful. We argue that low-precision floating points can perform well provided the error is properly compensated at the critical locations in the training process. We propose Collage which utilizes multi-component float representation in low-precision to accurately perform operations with numerical errors accounted. To understand the impact of imprecision to training, we propose a simple and novel metric which tracks the lost information during training as well as differentiates various precision strategies. Our method works with commonly used low-precision such as half-precision (16-bit floating points) and can be naturally extended to work with even lower precision such as 8-bit. Experimental results show that pre-training using Collage removes the requirement of using 32-bit floating-point copies of the model and attains similar/better training performance compared to (16, 32)-bit mixed-precision strategy, with up to 3.7times speedup and sim 15% to 23% less memory usage in practice.

We investigate large language model performance across five orders of magnitude of compute scaling in eleven recent model architectures. We show that average benchmark performance, aggregating over many individual tasks and evaluations as in the commonly-used BIG-Bench dataset, is decently predictable as a function of training compute scale. Specifically, when extrapolating BIG-Bench Hard performance across one order of magnitude in compute, we observe average absolute errors of 6 percentage points (pp). By contrast, extrapolation for individual BIG-Bench tasks across an order of magnitude in compute yields higher average errors of 18pp. Nonetheless, individual task performance remains significantly more predictable than chance. Overall, our work suggests compute scaling provides a promising basis to forecast AI capabilities in diverse benchmarks, though predicting performance in specific tasks poses challenges.

Six-bit quantization (FP6) can effectively reduce the size of large language models (LLMs) and preserve the model quality consistently across varied applications. However, existing systems do not provide Tensor Core support for FP6 quantization and struggle to achieve practical performance improvements during LLM inference. It is challenging to support FP6 quantization on GPUs due to (1) unfriendly memory access of model weights with irregular bit-width and (2) high runtime overhead of weight de-quantization. To address these problems, we propose TC-FPx, the first full-stack GPU kernel design scheme with unified Tensor Core support of float-point weights for various quantization bit-width. We integrate TC-FPx kernel into an existing inference system, providing new end-to-end support (called FP6-LLM) for quantized LLM inference, where better trade-offs between inference cost and model quality are achieved. Experiments show that FP6-LLM enables the inference of LLaMA-70b using only a single GPU, achieving 1.69x-2.65x higher normalized inference throughput than the FP16 baseline. The source code will be publicly available soon.

Existing evaluation benchmarks of language models of code (code LMs) focus almost exclusively on whether the LMs can generate functionally-correct code. In real-world software engineering, developers think beyond functional correctness. They have requirements on "how" a functionality should be implemented to meet overall system design objectives like efficiency, security, and maintainability. They would also trust the code LMs more if the LMs demonstrate robust understanding of requirements and code semantics. We propose a new benchmark NoFunEval to evaluate code LMs on non-functional requirements and simple classification instances for both functional and non-functional requirements. We propose a prompting method, Coding Concepts (CoCo), as a way for a developer to communicate the domain knowledge to the LMs. We conduct an extensive evaluation of twenty-two code LMs. Our finding is that they generally falter when tested on our benchmark, hinting at fundamental blindspots in their training setups. Surprisingly, even the classification accuracy on functional-correctness instances derived from the popular HumanEval benchmark is low, calling in question the depth of their comprehension and the source of their success in generating functionally-correct code in the first place. We will release our benchmark and evaluation scripts publicly at https://aka.ms/NoFunEval.

In this study, we present a novel dataset for training machine learning models translating between OpenMP Fortran and C++ code. To ensure reliability and applicability, the dataset is created from a range of representative open-source OpenMP benchmarks. It is also refined using a meticulous code similarity test. The effectiveness of our dataset is assessed using both quantitative (CodeBLEU) and qualitative (human evaluation) methods. We showcase how this dataset significantly elevates the translation competencies of large language models (LLMs). Specifically, models without prior coding knowledge experienced a boost of times~5.1 in their CodeBLEU scores, while models with some coding familiarity saw an impressive times~9.9-fold increase. The best fine-tuned model using our dataset outperforms GPT-4. It is also reaching human-level accuracy. This work underscores the immense potential of our dataset in propelling advancements in the domain of code translation for high-performance computing. The dataset is accessible at https://github.com/bin123apple/Fortran-CPP-HPC-code-translation-dataset{OpenMP-Fortran-CPP-Translation}.

Large language models (LLMs) have achieved impressive success on many benchmarks for mathematical reasoning. However, there is growing concern that some of this performance actually reflects dataset contamination, where data closely resembling benchmark questions leaks into the training data, instead of true reasoning ability. To investigate this claim rigorously, we commission Grade School Math 1000 (GSM1k). GSM1k is designed to mirror the style and complexity of the established GSM8k benchmark, the gold standard for measuring elementary mathematical reasoning. We ensure that the two benchmarks are comparable across important metrics such as human solve rates, number of steps in solution, answer magnitude, and more. When evaluating leading open- and closed-source LLMs on GSM1k, we observe accuracy drops of up to 13%, with several families of models (e.g., Phi and Mistral) showing evidence of systematic overfitting across almost all model sizes. At the same time, many models, especially those on the frontier, (e.g., Gemini/GPT/Claude) show minimal signs of overfitting. Further analysis suggests a positive relationship (Spearman's r^2=0.32) between a model's probability of generating an example from GSM8k and its performance gap between GSM8k and GSM1k, suggesting that many models may have partially memorized GSM8k.

Standard accuracy benchmarks are designed to test how closely large language models (LLMs) approach correct answers, but are not suitable for testing whether LLMs stick with a correct answer when that answer is challenged by a plausible counter-argument. We introduce a controlled protocol for evaluating answer stability: after a model answers a multiple-choice question correctly, we challenge the model's answer with a coherent argument for an incorrect option and measure whether the model flips. The setup a) isolates argumentative content from overt social pressure and b) varies argument length, self-attribution, and cross-model source. Across seven frontier models and 57 MMLU subjects, flip rates range from 17.5% to 97.3%, revealing large differences in stability that are not captured by accuracy metrics alone. We find that self-attribution consistently increases flip rates (mean +7.1pp, up to +18.7pp). Also, pooling wrong-answer arguments across models and selecting the most effective one per question yields stronger adversarial challenges than relying on any single source model. We further construct MaxFlip, a curated challenge set that amplifies flips by up to +23.6pp over standard self-generated challenges. We release the protocol, challenge records, and MaxFlip to support stability evaluation alongside standard accuracy benchmarks. Materials are available at https://github.com/nafisenik/WhoFlips and https://hf.co/datasets/nafisehNik/WhoFlips.

We build four new test sets for the Stanford Question Answering Dataset (SQuAD) and evaluate the ability of question-answering systems to generalize to new data. Our first test set is from the original Wikipedia domain and measures the extent to which existing systems overfit the original test set. Despite several years of heavy test set re-use, we find no evidence of adaptive overfitting. The remaining three test sets are constructed from New York Times articles, Reddit posts, and Amazon product reviews and measure robustness to natural distribution shifts. Across a broad range of models, we observe average performance drops of 3.8, 14.0, and 17.4 F1 points, respectively. In contrast, a strong human baseline matches or exceeds the performance of SQuAD models on the original domain and exhibits little to no drop in new domains. Taken together, our results confirm the surprising resilience of the holdout method and emphasize the need to move towards evaluation metrics that incorporate robustness to natural distribution shifts.

Recent research has generated hope that inference scaling could allow weaker language models to match or exceed the accuracy of stronger models, such as by repeatedly sampling solutions to a coding problem until it passes unit tests. The central thesis of this paper is that there is no free lunch for inference scaling: indefinite accuracy improvement through resampling can only be realized if the "verifier" (in this case, a set of unit tests) is perfect. When the verifier is imperfect, as it almost always is in domains such as reasoning or coding (for example, unit tests have imperfect coverage), there is a nonzero probability of false positives: incorrect solutions that pass the verifier. Resampling cannot decrease this probability, so it imposes an upper bound to the accuracy of resampling-based inference scaling even with an infinite compute budget. We find that there is a very strong correlation between the model's single-sample accuracy (i.e. accuracy without unit tests) and its false positive rate on coding benchmarks HumanEval and MBPP, whose unit tests have limited coverage. Therefore, no amount of inference scaling of weaker models can enable them to match the single-sample accuracy of a sufficiently strong model (Fig. 1a). When we consider that false positives have a negative utility compared to abstaining from producing a solution, it bends the inference scaling curve further downward. Empirically, we find that the optimal number of samples can be less than 10 under realistic assumptions (Fig. 1b). Finally, we show that beyond accuracy, false positives may have other undesirable qualities, such as poor adherence to coding style conventions.

Almost every paper on LLM jailbreaks and prompt injection reports an attack-success rate (ASR), and that number is assigned not by people but by an automated judge: either a safety classifier trained for the task, or a general chat model prompted to grade. The judge is rarely checked. We check it. Using 596 human-labeled completions from the HarmBench classifier validation set, we compare the two judge families against human majority votes and then attack them. The two families fail in opposite ways. The dedicated classifier over-flags (precision 0.835, recall 0.974); three different LLM-as-judges keep high precision (0.81 to 0.94) but show erratic recall (0.06 to 0.65), so the same responses produce very different ASR depending on which judge scores them. The two families also differ sharply in robustness. Wrappers that leave the harmful text untouched and only add benign framing flip every LLM-judge between 57% and 100% of the time, and a single prepended refusal sentence accounts for much of this (39% to 88%). The dedicated classifier resists these surface attacks (at most 6.7%), but a white-box GCG attack on its open weights flips 70% of confident true positives (21 of 30; 95% CI 54 to 86%) even at a small optimization budget. A two-annotator audit confirms the attacks leave the harm intact: every one of 80 sampled flips still contained the harmful content. Because a large and growing share of reported ASR comes from LLM-judges, many such numbers are unreliable both on average and under deliberate pressure. We recommend that papers report judge precision and recall on a human-labeled slice, report ASR corrected for judge precision, and include an adversarial check of the judge. Our code is released.

Objective: To enhance automated de-identification of radiology reports by scaling transformer-based models through extensive training datasets and benchmarking performance against commercial cloud vendor systems for protected health information (PHI) detection. Materials and Methods: In this retrospective study, we built upon a state-of-the-art, transformer-based, PHI de-identification pipeline by fine-tuning on two large annotated radiology corpora from Stanford University, encompassing chest X-ray, chest CT, abdomen/pelvis CT, and brain MR reports and introducing an additional PHI category (AGE) into the architecture. Model performance was evaluated on test sets from Stanford and the University of Pennsylvania (Penn) for token-level PHI detection. We further assessed (1) the stability of synthetic PHI generation using a "hide-in-plain-sight" method and (2) performance against commercial systems. Precision, recall, and F1 scores were computed across all PHI categories. Results: Our model achieved overall F1 scores of 0.973 on the Penn dataset and 0.996 on the Stanford dataset, outperforming or maintaining the previous state-of-the-art model performance. Synthetic PHI evaluation showed consistent detectability (overall F1: 0.959 [0.958-0.960]) across 50 independently de-identified Penn datasets. Our model outperformed all vendor systems on synthetic Penn reports (overall F1: 0.960 vs. 0.632-0.754). Discussion: Large-scale, multimodal training improved cross-institutional generalization and robustness. Synthetic PHI generation preserved data utility while ensuring privacy. Conclusion: A transformer-based de-identification model trained on diverse radiology datasets outperforms prior academic and commercial systems in PHI detection and establishes a new benchmark for secure clinical text processing.

Language models are increasingly used in Brazil, but most evaluation remains English-centric. This paper presents Alvorada-Bench, a 4,515-question, text-only benchmark drawn from five Brazilian university entrance examinations. Evaluating twenty models under zero-shot, role-playing, and chain-of-thought prompting, producing 270,900 responses with structured self-reports of confidence, perceived difficulty, and Bloom level. The top models exceed 94% accuracy overall, but accuracy declines on Mathematics and on the engineering oriented IME and ITA exams, indicating persistent weaknesses in multi-step reasoning. Confidence is well calibrated and correlates with perceived difficulty, revealing that models can accurately assess their own certainty capabilities. A cost accuracy analysis shows that high accuracy is achievable at under $2 per 1K tokens. On ENEM 2024 the top model (O3) achieved perfect scores in Languages subject questions while even the weakest system (GPT-4.1 Nano) only underperforms humans in Mathematics. Through exams that distill decades of Brazilian educational priorities and assess millions of students yearly, Alvorada-Bench establishes whether language models can navigate the intersection of language, culture, and reasoning that defines academic readiness in Brazil.

Best-of-N (BoN) Average Displacement Error (ADE)/ Final Displacement Error (FDE) is the most used metric for evaluating trajectory prediction models. Yet, the BoN does not quantify the whole generated samples, resulting in an incomplete view of the model's prediction quality and performance. We propose a new metric, Average Mahalanobis Distance (AMD) to tackle this issue. AMD is a metric that quantifies how close the whole generated samples are to the ground truth. We also introduce the Average Maximum Eigenvalue (AMV) metric that quantifies the overall spread of the predictions. Our metrics are validated empirically by showing that the ADE/FDE is not sensitive to distribution shifts, giving a biased sense of accuracy, unlike the AMD/AMV metrics. We introduce the usage of Implicit Maximum Likelihood Estimation (IMLE) as a replacement for traditional generative models to train our model, Social-Implicit. IMLE training mechanism aligns with AMD/AMV objective of predicting trajectories that are close to the ground truth with a tight spread. Social-Implicit is a memory efficient deep model with only 5.8K parameters that runs in real time of about 580Hz and achieves competitive results. Interactive demo of the problem can be seen at https://www.abduallahmohamed.com/social-implicit-amdamv-adefde-demo . Code is available at https://github.com/abduallahmohamed/Social-Implicit .

We propose a deep-learning system -- for the SQuAD2.0 task -- that finds, or indicates the lack of, a correct answer to a question in a context paragraph. Our goal is to learn an ensemble of heterogeneous SQuAD2.0 models that, when blended properly, outperforms the best model in the ensemble per se. We created a stacking ensemble that combines top-N predictions from two models, based on ALBERT and RoBERTa, into a multiclass classification task to pick the best answer out of their predictions. We explored various ensemble configurations, input representations, and model architectures. For evaluation, we examined test-set EM and F1 scores; our best-performing ensemble incorporated a CNN-based meta-model and scored 87.117 and 90.306, respectively -- a relative improvement of 0.55% for EM and 0.61% for F1 scores, compared to the baseline performance of the best model in the ensemble, an ALBERT-based model, at 86.644 for EM and 89.760 for F1.

With the increasing computational costs associated with deep learning, automated hyperparameter optimization methods, strongly relying on black-box Bayesian optimization (BO), face limitations. Freeze-thaw BO offers a promising grey-box alternative, strategically allocating scarce resources incrementally to different configurations. However, the frequent surrogate model updates inherent to this approach pose challenges for existing methods, requiring retraining or fine-tuning their neural network surrogates online, introducing overhead, instability, and hyper-hyperparameters. In this work, we propose FT-PFN, a novel surrogate for Freeze-thaw style BO. FT-PFN is a prior-data fitted network (PFN) that leverages the transformers' in-context learning ability to efficiently and reliably do Bayesian learning curve extrapolation in a single forward pass. Our empirical analysis across three benchmark suites shows that the predictions made by FT-PFN are more accurate and 10-100 times faster than those of the deep Gaussian process and deep ensemble surrogates used in previous work. Furthermore, we show that, when combined with our novel acquisition mechanism (MFPI-random), the resulting in-context freeze-thaw BO method (ifBO), yields new state-of-the-art performance in the same three families of deep learning HPO benchmarks considered in prior work.