Daily Papers

Multi-head attention in Vision Transformers (ViTs) allows independent attention patterns across heads, but without explicit regularization, heads may learn redundant patterns rather than complementary roles. Correlation-based penalties encourage head disentanglement, yet apply uniform regularization across all training samples. In face recognition (FR), hard samples whose embeddings lie close to competing identities are critical for optimization and generalization. Motivated by this, we propose ViT-HarDis, which conditions attention head disentanglement on sample difficulty: samples with high cosine similarity to negative class centers receive stronger head decorrelation, enforcing specialization where identity ambiguity is highest. Experiments show improvements over both the baseline and uniform disentanglement on most benchmarks. Our analysis shows that ViT-HarDis reduces the similarity of hard samples to competing class centers while decreasing inter-head attention similarity, and that applying disentanglement only to the final transformer layers outperforms regularizing the entire network. Trained on WebFace4M, ViT-HarDis achieves SOTA results among ViT-based methods on IJB-B, IJB-C, and TinyFace Rank-1, while achieving the best IJB-B and TinyFace results when trained on MS1MV3, improving FR without architectural modifications or additional inference cost. Code: https://github.com/TaharChettaoui/Hard-Sample-Conditioned-Attention-for-FR.

Vision Transformers (ViTs) perform strongly in face recognition (FR), yet their fixed-depth inference limits deployment in resource-constrained settings. We propose SD-ViT, a training framework that gives a usable exit at every block depth by making every depth produce discriminative embeddings, for budget-selected fixed-depth exits. Standard ViTs supervise intermediate layers only through backpropagation, so their intermediate representations are not directly optimized to form usable identity embeddings. SD-ViT adds a stochastic auxiliary signal: at each iteration a randomly selected intermediate block is passed through the same embedding head as the final layer and trained with a weighted margin-penalty softmax loss. The objective is thus stochastically sampled deep supervision through a shared classifier. Because both loss terms share that head and classifier, intermediate tokens are trained to map into the same embedding space as final-layer tokens. This matters for FR, where matching is by similarity: a probe processed at an early exit can be compared directly against full-depth gallery embeddings, with no gallery recomputation or adaptation layers. On established benchmarks, SD-ViT stays within 0.4 IJB-C points of the same backbone trained conventionally at full depth, while its early-exit probes recover over 96% of their own full-depth performance at 50% of the computational cost without modifying the reference gallery. A single verification threshold calibrated at full depth remains usable from quarter depth onward.

Deep face recognition has achieved great success due to large-scale training databases and rapidly developing loss functions. The existing algorithms devote to realizing an ideal idea: minimizing the intra-class distance and maximizing the inter-class distance. However, they may neglect that there are also low quality training images which should not be optimized in this strict way. Considering the imperfection of training databases, we propose that intra-class and inter-class objectives can be optimized in a moderate way to mitigate overfitting problem, and further propose a novel loss function, named sigmoid-constrained hypersphere loss (SFace). Specifically, SFace imposes intra-class and inter-class constraints on a hypersphere manifold, which are controlled by two sigmoid gradient re-scale functions respectively. The sigmoid curves precisely re-scale the intra-class and inter-class gradients so that training samples can be optimized to some degree. Therefore, SFace can make a better balance between decreasing the intra-class distances for clean examples and preventing overfitting to the label noise, and contributes more robust deep face recognition models. Extensive experiments of models trained on CASIA-WebFace, VGGFace2, and MS-Celeb-1M databases, and evaluated on several face recognition benchmarks, such as LFW, MegaFace and IJB-C databases, have demonstrated the superiority of SFace.

This paper presents a summary of the Competition on Adapting Foundation Models for Face Recognition Using Synthetic Training Data (AFMFR), held at the 2026 International Joint Conference on Biometrics (IJCB 2026). The competition received a total of eight valid submissions from four distinct teams across two complementary tracks: a Full Data Track, in which participants adapt the CLIP ViT-L/14 foundation model using large-scale synthetic identity data, and a Limited Data Track, designed to reflect more resource-constrained adaptation regimes. All training data was generated exclusively using IDPERTURB. Submitted solutions are ranked based on verification and identification performance across a diverse suite of benchmarks, including LFW, CFP-FP, AgeDB-30, CALFW, CPLFW, IJB-B, IJB-C, and TinyFace, using the Borda count method. Fairness evaluation is additionally conducted on the RFW dataset across four demographic groups. The results demonstrate that adaptation of the CLIP foundation model with synthetic training data substantially improves over the off-the-shelf model and, in several cases, surpasses the baseline. Notably, full fine-tuning with Sub-Center ArcFace (DMSTI-Neurotechnology) leads the Full Data Track, while rank-stabilized LoRA adaptation (Idiap-BSP) proves most effective under limited-data conditions.

In this paper, we introduce a new large-scale face dataset named VGGFace2. The dataset contains 3.31 million images of 9131 subjects, with an average of 362.6 images for each subject. Images are downloaded from Google Image Search and have large variations in pose, age, illumination, ethnicity and profession (e.g. actors, athletes, politicians). The dataset was collected with three goals in mind: (i) to have both a large number of identities and also a large number of images for each identity; (ii) to cover a large range of pose, age and ethnicity; and (iii) to minimize the label noise. We describe how the dataset was collected, in particular the automated and manual filtering stages to ensure a high accuracy for the images of each identity. To assess face recognition performance using the new dataset, we train ResNet-50 (with and without Squeeze-and-Excitation blocks) Convolutional Neural Networks on VGGFace2, on MS- Celeb-1M, and on their union, and show that training on VGGFace2 leads to improved recognition performance over pose and age. Finally, using the models trained on these datasets, we demonstrate state-of-the-art performance on all the IARPA Janus face recognition benchmarks, e.g. IJB-A, IJB-B and IJB-C, exceeding the previous state-of-the-art by a large margin. Datasets and models are publicly available.

Since the beginning of world-wide COVID-19 pandemic, facial masks have been recommended to limit the spread of the disease. However, these masks hide certain facial attributes. Hence, it has become difficult for existing face recognition systems to perform identity verification on masked faces. In this context, it is necessary to develop masked Face Recognition (MFR) for contactless biometric recognition systems. Thus, in this paper, we propose Complementary Attention Learning and Multi-Focal Spatial Attention that precisely removes masked region by training complementary spatial attention to focus on two distinct regions: masked regions and backgrounds. In our method, standard spatial attention and networks focus on unmasked regions, and extract mask-invariant features while minimizing the loss of the conventional Face Recognition (FR) performance. For conventional FR, we evaluate the performance on the IJB-C, Age-DB, CALFW, and CPLFW datasets. We evaluate the MFR performance on the ICCV2021-MFR/Insightface track, and demonstrate the improved performance on the both MFR and FR datasets. Additionally, we empirically verify that spatial attention of proposed method is more precisely activated in unmasked regions.

Recent advances in Vision Transformers (ViTs) for face recognition (FR) have moved beyond the standard CLS-token paradigm. In this paradigm, a special classification token (CLS) is prepended to the patch embeddings and used as a representation of the input for downstream tasks. An alternative approach, Concatenated Patch Embeddings (CPE), instead leverages all patch tokens by concatenating them into a single vector, which is then projected into a compact face representation. CPE has been shown to improve recognition performance in comparison to CLS-based ones, but our qualitative analysis of attention maps showed the presence of artifacts that limit their interpretability. To address this issue, we incorporate register tokens, learnable tokens concatenated to the initial patch embeddings, and processed jointly through the ViT encoder blocks. This mechanism has been shown to produce more structured and interpretable attention maps compared to baseline ViT. We empirically demonstrate that these artifacts consistently appear across various ViT backbones, including small and large models, and that introducing register tokens effectively mitigates them. Adding four or eight registers significantly enhances interpretability, with eight registers providing the highest verification accuracies and smoothest attention structures. Our resulting model, ViT-8R, corresponds to a CPE-based ViT-B architecture augmented with eight register tokens achieves state-of-the-art performance among ViT-based FR models on large-scale IJB-B and IJB-C benchmarks. Also, ViT-8R produces substantially clearer attention maps compared with the baseline model, which offer deeper insight into the model's attention behavior (https://github.com/TaharChettaoui/ViT-FR-Registers)

Vision Transformers (ViTs) have gained significant attention in computer vision and shown strong potential for face recognition (FR). However, their high computational cost makes deployment on resource-constrained devices challenging, motivating the need for methods that balance efficiency and accuracy. In this work, we investigate early exiting in pretrained ViTs as a simple yet effective training-free strategy for efficient FR inference. Leveraging the uniform feature dimensionality across transformer encoder blocks, we introduce ViT-FREE, a multi-exit framework that enables face verification directly from intermediate representations without modifying or retraining the backbone model, and thus, reducing inference cost. Empirically, we show that patch embeddings and attention maps evolve progressively across depth, exhibiting high similarity between consecutive ViT blocks and increasing alignment with the final representation. This indicates gradual feature refinement and attention convergence, suggesting that intermediate layers already provide stable and discriminative representations suitable for early exiting. Through extensive experiments on multiple FR benchmarks, we systematically analyze the accuracy-efficiency trade-off across exit depths. Our results demonstrate that later exits achieve a highly favorable balance, with exiting at layer 10 yielding up to a 20% speedup while incurring only a 1.5 drop in verification performance on benchmarks such as IJB-C. Also, we propose ViT-FREE_FT, a lightweight exit-specific fine-tuning strategy that adapts only the projection layers using a small synthetic dataset while keeping the transformer backbone frozen. This approach improves the performance of shallow exits while preserving the efficiency benefits and leaving deeper exits largely unaffected.

This paper introduces FaceLiVT, a lightweight yet powerful face recognition model that integrates a hybrid Convolution Neural Network (CNN)-Transformer architecture with an innovative and lightweight Multi-Head Linear Attention (MHLA) mechanism. By combining MHLA alongside a reparameterized token mixer, FaceLiVT effectively reduces computational complexity while preserving competitive accuracy. Extensive evaluations on challenging benchmarks; including LFW, CFP-FP, AgeDB-30, IJB-B, and IJB-C; highlight its superior performance compared to state-of-the-art lightweight models. MHLA notably improves inference speed, allowing FaceLiVT to deliver high accuracy with lower latency on mobile devices. Specifically, FaceLiVT is 8.6 faster than EdgeFace, a recent hybrid CNN-Transformer model optimized for edge devices, and 21.2 faster than a pure ViT-Based model. With its balanced design, FaceLiVT offers an efficient and practical solution for real-time face recognition on resource-constrained platforms.

In this paper, we present EdgeFace, a lightweight and efficient face recognition network inspired by the hybrid architecture of EdgeNeXt. By effectively combining the strengths of both CNN and Transformer models, and a low rank linear layer, EdgeFace achieves excellent face recognition performance optimized for edge devices. The proposed EdgeFace network not only maintains low computational costs and compact storage, but also achieves high face recognition accuracy, making it suitable for deployment on edge devices. Extensive experiments on challenging benchmark face datasets demonstrate the effectiveness and efficiency of EdgeFace in comparison to state-of-the-art lightweight models and deep face recognition models. Our EdgeFace model with 1.77M parameters achieves state of the art results on LFW (99.73%), IJB-B (92.67%), and IJB-C (94.85%), outperforming other efficient models with larger computational complexities. The code to replicate the experiments will be made available publicly.

Face Image Quality Assessment (FIQA) is essential for reliable face recognition systems. Current approaches primarily exploit only final-layer representations, while training-free methods require multiple forward passes or backpropagation. We propose ViTNT-FIQA, a training-free approach that measures the stability of patch embedding evolution across intermediate Vision Transformer (ViT) blocks. We demonstrate that high-quality face images exhibit stable feature refinement trajectories across blocks, while degraded images show erratic transformations. Our method computes Euclidean distances between L2-normalized patch embeddings from consecutive transformer blocks and aggregates them into image-level quality scores. We empirically validate this correlation on a quality-labeled synthetic dataset with controlled degradation levels. Unlike existing training-free approaches, ViTNT-FIQA requires only a single forward pass without backpropagation or architectural modifications. Through extensive evaluation on eight benchmarks (LFW, AgeDB-30, CFP-FP, CALFW, Adience, CPLFW, XQLFW, IJB-C), we show that ViTNT-FIQA achieves competitive performance with state-of-the-art methods while maintaining computational efficiency and immediate applicability to any pre-trained ViT-based face recognition model.

In this paper, we contribute a new million-scale face benchmark containing noisy 4M identities/260M faces (WebFace260M) and cleaned 2M identities/42M faces (WebFace42M) training data, as well as an elaborately designed time-constrained evaluation protocol. Firstly, we collect 4M name list and download 260M faces from the Internet. Then, a Cleaning Automatically utilizing Self-Training (CAST) pipeline is devised to purify the tremendous WebFace260M, which is efficient and scalable. To the best of our knowledge, the cleaned WebFace42M is the largest public face recognition training set and we expect to close the data gap between academia and industry. Referring to practical scenarios, Face Recognition Under Inference Time conStraint (FRUITS) protocol and a test set are constructed to comprehensively evaluate face matchers. Equipped with this benchmark, we delve into million-scale face recognition problems. A distributed framework is developed to train face recognition models efficiently without tampering with the performance. Empowered by WebFace42M, we reduce relative 40% failure rate on the challenging IJB-C set, and ranks the 3rd among 430 entries on NIST-FRVT. Even 10% data (WebFace4M) shows superior performance compared with public training set. Furthermore, comprehensive baselines are established on our rich-attribute test set under FRUITS-100ms/500ms/1000ms protocol, including MobileNet, EfficientNet, AttentionNet, ResNet, SENet, ResNeXt and RegNet families. Benchmark website is https://www.face-benchmark.org.

Though tremendous strides have been made in uncontrolled face detection, accurate and efficient face localisation in the wild remains an open challenge. This paper presents a robust single-stage face detector, named RetinaFace, which performs pixel-wise face localisation on various scales of faces by taking advantages of joint extra-supervised and self-supervised multi-task learning. Specifically, We make contributions in the following five aspects: (1) We manually annotate five facial landmarks on the WIDER FACE dataset and observe significant improvement in hard face detection with the assistance of this extra supervision signal. (2) We further add a self-supervised mesh decoder branch for predicting a pixel-wise 3D shape face information in parallel with the existing supervised branches. (3) On the WIDER FACE hard test set, RetinaFace outperforms the state of the art average precision (AP) by 1.1% (achieving AP equal to 91.4%). (4) On the IJB-C test set, RetinaFace enables state of the art methods (ArcFace) to improve their results in face verification (TAR=89.59% for FAR=1e-6). (5) By employing light-weight backbone networks, RetinaFace can run real-time on a single CPU core for a VGA-resolution image. Extra annotations and code have been made available at: https://github.com/deepinsight/insightface/tree/master/RetinaFace.

Aiming to enhance Face Recognition (FR) on Low-Quality (LQ) inputs, recent studies suggest incorporating synthetic LQ samples into training. Although promising, the quality factors that are considered in these works are general rather than FR-specific, \eg, atmospheric turbulence, resolution, \etc. Motivated by the observation of the vulnerability of current FR models to even small Face Alignment Errors (FAE) in LQ images, we present a simple yet effective method that considers FAE as another quality factor that is tailored to FR. We seek to improve LQ FR by enhancing FR models' robustness to FAE. To this aim, we formalize the problem as a combination of differentiable spatial transformations and adversarial data augmentation in FR. We perturb the alignment of the training samples using a controllable spatial transformation and enrich the training with samples expressing FAE. We demonstrate the benefits of the proposed method by conducting evaluations on IJB-B, IJB-C, IJB-S (+4.3\% Rank1), and TinyFace (+2.63\%). https://github.com/msed-Ebrahimi/ARoFace{https://github.com/msed-Ebrahimi/ARoFace}

Recognition in low quality face datasets is challenging because facial attributes are obscured and degraded. Advances in margin-based loss functions have resulted in enhanced discriminability of faces in the embedding space. Further, previous studies have studied the effect of adaptive losses to assign more importance to misclassified (hard) examples. In this work, we introduce another aspect of adaptiveness in the loss function, namely the image quality. We argue that the strategy to emphasize misclassified samples should be adjusted according to their image quality. Specifically, the relative importance of easy or hard samples should be based on the sample's image quality. We propose a new loss function that emphasizes samples of different difficulties based on their image quality. Our method achieves this in the form of an adaptive margin function by approximating the image quality with feature norms. Extensive experiments show that our method, AdaFace, improves the face recognition performance over the state-of-the-art (SoTA) on four datasets (IJB-B, IJB-C, IJB-S and TinyFace). Code and models are released in https://github.com/mk-minchul/AdaFace.

Feature fusion plays a crucial role in unconstrained face recognition where inputs (probes) comprise of a set of N low quality images whose individual qualities vary. Advances in attention and recurrent modules have led to feature fusion that can model the relationship among the images in the input set. However, attention mechanisms cannot scale to large N due to their quadratic complexity and recurrent modules suffer from input order sensitivity. We propose a two-stage feature fusion paradigm, Cluster and Aggregate, that can both scale to large N and maintain the ability to perform sequential inference with order invariance. Specifically, Cluster stage is a linear assignment of N inputs to M global cluster centers, and Aggregation stage is a fusion over M clustered features. The clustered features play an integral role when the inputs are sequential as they can serve as a summarization of past features. By leveraging the order-invariance of incremental averaging operation, we design an update rule that achieves batch-order invariance, which guarantees that the contributions of early image in the sequence do not diminish as time steps increase. Experiments on IJB-B and IJB-S benchmark datasets show the superiority of the proposed two-stage paradigm in unconstrained face recognition. Code and pretrained models are available in https://github.com/mk-minchul/caface