Daily Papers

Recent advances in block diffusion language models have demonstrated competitive performance and strong scalability on reasoning tasks. However, existing BDLMs have limited exploration under the test-time scaling setting and face more severe decoding challenges in long Chain-of-Thought reasoning, particularly in balancing the decoding speed and effectiveness. In this work, we propose a unified framework for test-time scaling in BDLMs that introduces adaptivity in both decoding and block-wise generation. At the decoding level, we propose Bounded Adaptive Confidence Decoding (BACD), a difficulty-aware sampling strategy that dynamically adjusts denoising based on model confidence, accelerating inference while controlling error accumulation. Beyond step-wise adaptivity, we introduce Think Coarse, Critic Fine (TCCF), a test-time scaling paradigm that allocates large block sizes to exploratory reasoning and smaller block sizes to refinement, achieving an effective efficiency-effectiveness balance. To enable efficient and effective decoding with a large block size, we adopt Progressive Block Size Extension, which mitigates performance degradation when scaling block sizes. Extensive experiments show that applying BACD and TCCF to TDAR-8B yields significant improvements over strong baselines such as TraDo-8B (2.26x speedup, +11.2 points on AIME24). These results mark an important step toward unlocking the potential of BDLMs for test-time scaling in complex reasoning tasks.

Progressive Learning (PL) reduces pre-training computational overhead by gradually increasing model scale. While prior work has extensively explored depth expansion, width expansion remains significantly understudied, with the few existing methods limited to the early stages of training. However, expanding width during the mid-stage is essential for maximizing computational savings, yet it remains a formidable challenge due to severe training instabilities. Empirically, we show that naive initialization at this stage disrupts activation statistics, triggering loss spikes, while copy-based initialization introduces gradient symmetry that hinders feature diversity. To address these issues, we propose SPARKLING (balancing {S}ignal {P}reservation {A}nd symmet{R}y brea{K}ing for width-progressive {L}earn{ING}), a novel framework for mid-stage width expansion. Our method achieves signal preservation via RMS-scale consistency, stabilizing activation statistics during expansion. Symmetry breaking is ensured through asymmetric optimizer state resetting and learning rate re-warmup. Extensive experiments on Mixture-of-Experts (MoE) models demonstrate that, across multiple width axes and optimizer families, SPARKLING consistently outperforms training from scratch and reduces training cost by up to 35% under 2times width expansion.

Diffusion language models (DLMs) have strong theoretical efficiency but are limited by fixed-length decoding and incompatibility with key-value (KV) caches. Block diffusion mitigates these issues, yet still enforces a fixed block size and requires expensive training. We introduce Next Sequence Prediction (NSP), which unifies next-token and next-block prediction, enabling the model to adaptively determine the generation length at each step. When the length is fixed to 1, NSP reduces to standard next-token prediction. Building on NSP, we propose Sequential Diffusion Language Model (SDLM), which can retrofit pre-trained autoregressive language models (ALMs) at minimal cost. Specifically, SDLM performs diffusion inference within fixed-size mask blocks, but dynamically decodes consecutive subsequences based on model confidence, thereby preserving KV-cache compatibility and improving robustness to varying uncertainty and semantics across the sequence. Experiments show that SDLM matches or surpasses strong autoregressive baselines using only 3.5M training samples, while achieving 2.1 higher throughput than Qwen-2.5. Notably, the SDLM-32B model delivers even more pronounced efficiency gains, demonstrating the strong scalability potential of our modeling paradigm. Project page and codes: https://github.com/OpenGVLab/SDLM

Block Diffusion Models (BDMs) support parallel generation, flexible-length output, and KV caching, making them promising for efficient document parsing. However, existing BDMs bind denoising and cache commitment to fixed block boundaries: parallelism shrinks during intra-block denoising, while generated tokens cannot be cached until the whole block is completed. Moreover, intra-block bidirectional denoising conflicts with inter-block autoregression, creating inconsistent information flow that can challenge structure-sensitive recognition. We propose the Prefix-Adaptive Block Diffusion Model (PA-BDM), which replaces intra-block bidirectional denoising with causal denoising from prefix to suffix and treats the block size as a maximum candidate range rather than a fixed commitment unit. PA-BDM uses Confidence-gated Structural Loss (CSL) to build low-entropy prefixes before extending training to longer continuations. During inference, Progressive Prefix Commitment (PPC) then dynamically commits the longest reliable prefix into the KV cache and resets the next candidate range from the updated prefix, restoring a large parallel decoding space at each step. Experiments show that the 3B PA-BDM achieves higher recognition scores on several benchmarks and improves inference throughput by 71.6\% over the 2.5B MinerU-Diffusion.

This paper presents LLaDA2.0 -- a tuple of discrete diffusion large language models (dLLM) scaling up to 100B total parameters through systematic conversion from auto-regressive (AR) models -- establishing a new paradigm for frontier-scale deployment. Instead of costly training from scratch, LLaDA2.0 upholds knowledge inheritance, progressive adaption and efficiency-aware design principle, and seamless converts a pre-trained AR model into dLLM with a novel 3-phase block-level WSD based training scheme: progressive increasing block-size in block diffusion (warm-up), large-scale full-sequence diffusion (stable) and reverting back to compact-size block diffusion (decay). Along with post-training alignment with SFT and DPO, we obtain LLaDA2.0-mini (16B) and LLaDA2.0-flash (100B), two instruction-tuned Mixture-of-Experts (MoE) variants optimized for practical deployment. By preserving the advantages of parallel decoding, these models deliver superior performance and efficiency at the frontier scale. Both models were open-sourced.

Is the uniform-state diffusion framework a more powerful paradigm for discrete diffusion? Recent studies indicate that this may be the case. In combination with predictor-corrector samplers, uniform-state diffusion models (USDMs) produce samples of higher-quality than masked diffusion models (MDMs), and USDMs equal or outperform MDMs in downstream tasks, even though they exhibit greater perplexity. Two issues remain unresolved. First, existing work compares uniform and masked diffusion with un-informed correctors that re-inject noise at random positions, rather than targeting tokens most likely to be wrong. Second, prior work compares full-sequence diffusion models, so we do not know whether the same conclusion holds when tokens are generated block by block. To address these issues, we introduce BlockGen, a blockwise sequence model that we instantiate with both masked and uniform diffusion. BlockGen trains on a mixture of block sizes and its likelihood interpolates between AR and pure diffusion more finely than models with a fixed block size. BlockGen enables AR-informed predictor-corrector sampling (ARPC), which combines AR and diffusion predictions to re-generate unlikely tokens without an auxiliary verifier. Under ancestral sampling, uniform outperforms masked in the block-by-block setting, especially in the few-step regime. Under ARPC, the gap closes and reverses at high NFE. With block size 16 on GSM8K, MDMs reach slightly higher accuracy than USDMs, and we observe a similar trend in Generative Perplexity on OpenWebText. Find our code at https://github.com/jdeschena/blockgen.

Block Diffusion Language Models (BD-LMs) improve diffusion-based text generation with KV caching and flexible-length generation. A natural next step is to extend them from Single-Block Diffusion (SingleBD) to Multi-Block Diffusion (MultiBD), where a running-set of consecutive blocks is decoded concurrently for inter-block parallelism. However, existing BD-LMs are mostly trained under teacher forcing, where the model observes only one noisy block conditioned on a clean prefix. While the recent diffusion forcing strategy introduces visibility among multiple noisy blocks, its training states still differ from MultiBD inference, where decoding operates on a bounded running-set with heterogeneous slot-wise noise patterns. To bridge this gap, we propose Multi-Block Diffusion Language Models (MBD-LMs), obtained by post-training BD-LMs with Multi-block Teacher Forcing (MultiTF). MultiTF integrates teacher forcing and diffusion forcing by training on bounded noise-groups conditioned on clean prefixes, with randomized noise-schedulers that better match MultiBD inference states. To make MultiBD practically executable, we further introduce an optimized decoding algorithm based on the Block Buffer mechanism that preserves prefix-cache reuse, keeps input shapes static, and translates increased decoding parallelism into wall-clock acceleration. Empirically, MBD-LLaDA2-Mini increases average Tokens Per Forward pass (TPF) from 3.47 to 6.19 and improves average accuracy from 79.95% to 81.03%; when combined with DMax, MBD-LLaDA2-Mini-DMax reaches an average TPF of 9.34 with only a 1.02% accuracy drop on math and code benchmarks.

Diffusion language models (DLMs) have recently emerged as a promising alternative to autoregressive models, primarily due to their ability to enable parallel decoding. Despite this advantage, most existing DLMs rely on a fixed generation length specified prior to decoding, which restricts their flexibility in real-world applications. While a few recent works attempt to support flexible-length generation, they typically suffer from notable limitations: some require costly retraining to accommodate variable-length outputs, while others depend solely on local confidence signals during decoding. Such local criteria fail to capture the evolving structure of the sequence, often resulting in suboptimal generation quality. In this paper, we propose a training-free, Bayesian structured decoding framework that formulates flexible-length generation as a dynamic structural inference problem. Our approach formulates flexible-length generation as a dynamic structural inference problem, jointly computing the expansion length, the block boundaries, and the decoding schedule. At each window expansion step, the method integrates local uncertainty with structural signals via a unified mechanism that supports dynamic structured generation, including both flexible block expansion and block organization, while maintaining coherence. Extensive experiments across multiple benchmarks demonstrate that our approach significantly improves generation quality and flexibility over existing fixed-length and flexible-length baselines. These results highlight the advantage of Bayesian structured decoding for diffusion language model, providing a principled and efficient solution for structured text generation.

With the latest advances in deep learning, there has been a lot of focus on the online learning paradigm due to its relevance in practical settings. Although many methods have been investigated for optimal learning settings in scenarios where the data stream is continuous over time, sparse networks training in such settings have often been overlooked. In this paper, we explore the problem of training a neural network with a target sparsity in a particular case of online learning: the anytime learning at macroscale paradigm (ALMA). We propose a novel way of progressive pruning, referred to as Anytime Progressive Pruning (APP); the proposed approach significantly outperforms the baseline dense and Anytime OSP models across multiple architectures and datasets under short, moderate, and long-sequence training. Our method, for example, shows an improvement in accuracy of approx 7% and a reduction in the generalization gap by approx 22%, while being approx 1/3 rd the size of the dense baseline model in few-shot restricted imagenet training. We further observe interesting nonmonotonic transitions in the generalization gap in the high number of megabatches-based ALMA. The code and experiment dashboards can be accessed at https://github.com/landskape-ai/Progressive-Pruning and https://wandb.ai/landskape/APP, respectively.

Recent surge in large-scale generative models has spurred the development of vast fields in computer vision. In particular, text-to-image diffusion models have garnered widespread adoption across diverse domain due to their potential for high-fidelity image generation. Nonetheless, existing large-scale diffusion models are confined to generate images of up to 1K resolution, which is far from meeting the demands of contemporary commercial applications. Directly sampling higher-resolution images often yields results marred by artifacts such as object repetition and distorted shapes. Addressing the aforementioned issues typically necessitates training or fine-tuning models on higher resolution datasets. However, this undertaking poses a formidable challenge due to the difficulty in collecting large-scale high-resolution contents and substantial computational resources. While several preceding works have proposed alternatives, they often fail to produce convincing results. In this work, we probe the generative ability of diffusion models at higher resolution beyond its original capability and propose a novel progressive approach that fully utilizes generated low-resolution image to guide the generation of higher resolution image. Our method obviates the need for additional training or fine-tuning which significantly lowers the burden of computational costs. Extensive experiments and results validate the efficiency and efficacy of our method. Project page: https://yhyun225.github.io/DiffuseHigh/

Diffusion-based large language models (dLLMs) are gaining attention for their inherent capacity for parallel decoding, offering a compelling alternative to autoregressive LLMs. Among various decoding strategies, blockwise semi-autoregressive (semi-AR) approaches are widely adopted due to their natural support for KV caching and their favorable accuracy-speed trade-off. However, this paper identifies two fundamental limitations in the conventional semi-AR decoding approach that applies a fixed block size: i) late decoding overhead, where the unmasking of high-confidence tokens outside the current block is unnecessarily delayed, and ii) premature decoding error, where low-confidence tokens inside the current block are committed too early, leading to incorrect tokens. This paper presents the first systematic investigation challenging the fixed block size assumption in semi-AR decoding. Through a statistical analysis of confidence dynamics during the denoising process, we identify a volatility band (VB) region during dLLM decoding, which encodes local semantic structure and can be used to guide adaptive block sizing. Leveraging these insights, we introduce AdaBlock-dLLM, a training-free, plug-and-play scheduler that adaptively aligns block boundaries with semantic steps by adjusting block size during runtime. Extensive experiments across diverse benchmarks show that AdaBlock-dLLM achieves up to 5.3% accuracy improvement under the same throughput budget. Beyond inference-time optimization, we hope our semantics-aware adaptive scheduling approach and confidence-based analysis will inspire future training strategies for dLLMs.

This paper introduces long-context Granite code models that support effective context windows of up to 128K tokens. Our solution for scaling context length of Granite 3B/8B code models from 2K/4K to 128K consists of a light-weight continual pretraining by gradually increasing its RoPE base frequency with repository-level file packing and length-upsampled long-context data. Additionally, we also release instruction-tuned models with long-context support which are derived by further finetuning the long context base models on a mix of permissively licensed short and long-context instruction-response pairs. While comparing to the original short-context Granite code models, our long-context models achieve significant improvements on long-context tasks without any noticeable performance degradation on regular code completion benchmarks (e.g., HumanEval). We release all our long-context Granite code models under an Apache 2.0 license for both research and commercial use.

We present T^star, a simple TraceRL-based training curriculum for progressive block-size scaling in masked diffusion language models (MDMs). Starting from an AR-initialized small-block MDM, T^star transitions smoothly to larger blocks, enabling higher-parallelism decoding with minimal performance degradation on math reasoning benchmarks. Moreover, further analysis suggests that T^star may actually converge to an alternative decoding schedule that achieves comparable performance.

Speculative decoding accelerates inference by using a lightweight draft model to generate candidate tokens in parallel, and are then verified by the target model, enabling lossless acceleration. Recently, diffusion-based speculative decoding further improves parallelism by generating multiple tokens per forward pass via block-level diffusion, achieving state-of-the-art (SOTA) performance. However, existing methods adopt a fixed inference block size and assume a uniform optimal decoding strategy across all inputs. In this paper, we show that this assumption is suboptimal, as the optimal block size varies across samples and plays a critical role in speculative decoding performance. Moreover, these values exhibit a clear local structure, concentrating around the training block size, which reduces the problem to a low-dimensional and structured decision space. Based on these insights, we propose BlockPilot, a sample-adaptive policy that predicts the optimal block size from the prefilling representation. Specifically, we formulate block size selection as a lightweight policy learning problem and propose an instance-adaptive decision mechanism that predicts the optimal block size based on the representation of the prefilling stage. The prediction is performed only once after prefilling, allowing for seamless integration. Extensive experiments demonstrate that our method is plug-and-play, introduces minimal overhead, and consistently improves efficiency, achieving an acceptance length of 5.92 and a 4.20times speedup on Qwen3-4B under temperature T=1.

We present BlockFusion, a diffusion-based model that generates 3D scenes as unit blocks and seamlessly incorporates new blocks to extend the scene. BlockFusion is trained using datasets of 3D blocks that are randomly cropped from complete 3D scene meshes. Through per-block fitting, all training blocks are converted into the hybrid neural fields: with a tri-plane containing the geometry features, followed by a Multi-layer Perceptron (MLP) for decoding the signed distance values. A variational auto-encoder is employed to compress the tri-planes into the latent tri-plane space, on which the denoising diffusion process is performed. Diffusion applied to the latent representations allows for high-quality and diverse 3D scene generation. To expand a scene during generation, one needs only to append empty blocks to overlap with the current scene and extrapolate existing latent tri-planes to populate new blocks. The extrapolation is done by conditioning the generation process with the feature samples from the overlapping tri-planes during the denoising iterations. Latent tri-plane extrapolation produces semantically and geometrically meaningful transitions that harmoniously blend with the existing scene. A 2D layout conditioning mechanism is used to control the placement and arrangement of scene elements. Experimental results indicate that BlockFusion is capable of generating diverse, geometrically consistent and unbounded large 3D scenes with unprecedented high-quality shapes in both indoor and outdoor scenarios.

Discrete diffusion models have steadily improved in quality relative to autoregressive (AR) models. However, these models are normally constrained to fixed-length generation and do not support key-value (KV) caching. Block diffusion partially bridges diffusion and AR by generating token blocks left-to-right, but its fixed-size sequential blocks limit decoding flexibility and parallelism. Here, we present a new class of language models, set diffusion, comprised of (i) a likelihood parameterization that factorizes over flexible-position, flexible-length token sets and (ii) a set-causal diffusion architecture that supports KV cache updates after every inference step. By factorizing over token sets instead of fixed-size blocks, tokens can be decoded in arbitrarily-ordered sets, including sliding-window sets, enabling faster inference and support for any-order decoding. Set diffusion achieves better speed-quality tradeoffs on mathematical reasoning, summarization, and unconditional generation compared to prior diffusion language models while offering stronger infilling performance than block diffusion. We provide the code, along with the model weights and blog post on the project page: https://m-arriola.com/setdlms/

Stable diffusion, a generative model used in text-to-image synthesis, frequently encounters resolution-induced composition problems when generating images of varying sizes. This issue primarily stems from the model being trained on pairs of single-scale images and their corresponding text descriptions. Moreover, direct training on images of unlimited sizes is unfeasible, as it would require an immense number of text-image pairs and entail substantial computational expenses. To overcome these challenges, we propose a two-stage pipeline named Any-Size-Diffusion (ASD), designed to efficiently generate well-composed images of any size, while minimizing the need for high-memory GPU resources. Specifically, the initial stage, dubbed Any Ratio Adaptability Diffusion (ARAD), leverages a selected set of images with a restricted range of ratios to optimize the text-conditional diffusion model, thereby improving its ability to adjust composition to accommodate diverse image sizes. To support the creation of images at any desired size, we further introduce a technique called Fast Seamless Tiled Diffusion (FSTD) at the subsequent stage. This method allows for the rapid enlargement of the ASD output to any high-resolution size, avoiding seaming artifacts or memory overloads. Experimental results on the LAION-COCO and MM-CelebA-HQ benchmarks demonstrate that ASD can produce well-structured images of arbitrary sizes, cutting down the inference time by 2x compared to the traditional tiled algorithm.

We present a hardware-oriented description of GoldenFloat (GF), a static-split floating-point family generated by a single closed rule, and three concrete artefacts: (i) an open multi-width RTL generator covering GF4-GF256 with a continuous-integration differential sweep against a correctly-rounded reference; (ii) an integer-backed Lucas-exact accumulator path verified at 500-digit precision for n = 1, ..., 256; and (iii) a GF16 FPGA codec passing a 35-of-35 testbench at 323 MHz on Artix-7 (Xilinx XC7A35T). For each total width N >= 4, the exponent width is e = round((N-1)/phi^2) with fraction f = N-1-e and phi = (1+sqrt(5))/2. The rule reproduces the realised exponent widths of nine formats (9/9) and extends consistently to GF128, GF512, GF1024. The rule is positioned alongside posit, takum, OCP-MX, and the IEEE P3109 multi-width float draft. We make no per-rung accuracy or superiority claim against any of them. The breadth/toolchain-coherence framing is recorded as an open conjecture with a pre-registered falsification path. A falsification ledger (FL-002) records open questions and the experiments that would settle them. An RTL-correctness erratum dated 2026-05-31 is reported; the fabricated TTSKY26b dies carry the defective multiplier portfolio, and the corrected generator is the regeneration baseline.

Generating minute-long videos is a critical step toward developing world models, providing a foundation for realistic extended scenes and advanced AI simulators. The emerging semi-autoregressive (block diffusion) paradigm integrates the strengths of diffusion and autoregressive models, enabling arbitrary-length video generation and improving inference efficiency through KV caching and parallel sampling. However, it yet faces two enduring challenges: (i) KV-cache-induced long-horizon error accumulation, and (ii) the lack of fine-grained long-video benchmarks and coherence-aware metrics. To overcome these limitations, we propose BlockVid, a novel block diffusion framework equipped with semantic-aware sparse KV cache, an effective training strategy called Block Forcing, and dedicated chunk-wise noise scheduling and shuffling to reduce error propagation and enhance temporal consistency. We further introduce LV-Bench, a fine-grained benchmark for minute-long videos, complete with new metrics evaluating long-range coherence. Extensive experiments on VBench and LV-Bench demonstrate that BlockVid consistently outperforms existing methods in generating high-quality, coherent minute-long videos. In particular, it achieves a 22.2% improvement on VDE Subject and a 19.4% improvement on VDE Clarity in LV-Bench over the state of the art approaches. Project website: https://ziplab.co/BlockVid. Inferix (Code): https://github.com/alibaba-damo-academy/Inferix.

Mixed-precision quantization is a promising approach for compressing large language models under tight memory budgets. However, existing mixed-precision methods typically suffer from one of two limitations: they either rely on expensive discrete optimization to determine precision allocation, or introduce hardware inefficiencies due to irregular memory layouts. We propose SFMP, a search-free and hardware-friendly mixed-precision quantization framework for large language models. The framework is built upon four novel ideas: Fractional bit-width, which extends integer bit-width for weight matrix to fractional value and transforms discrete precision allocation as a continuous problem; 2)Block-wise mixed-precision, enabling fine-grained precision within weight matrices while remaining hardware-friendly; 3)Row-column weight reordering, which aggregates salient weights via row and column reordering, incurring only a small activation reordering overhead during inference; 4)Unified GEMM kernel, which supports mixed-precision GEMM at arbitrary average bit-width. Extensive experiments demonstrate that SFMP outperforms state-of-the-art layer-wise mixed-precision methods under the same memory constraints, while significantly reducing quantization cost and improving inference efficiency. Code is available at https://github.com/Nkniexin/SFMP

In practical federated learning scenarios, the participating devices may have different bitwidths for computation and memory storage by design. However, despite the progress made in device-heterogeneous federated learning scenarios, the heterogeneity in the bitwidth specifications in the hardware has been mostly overlooked. We introduce a pragmatic FL scenario with bitwidth heterogeneity across the participating devices, dubbed as Bitwidth Heterogeneous Federated Learning (BHFL). BHFL brings in a new challenge, that the aggregation of model parameters with different bitwidths could result in severe performance degeneration, especially for high-bitwidth models. To tackle this problem, we propose ProWD framework, which has a trainable weight dequantizer at the central server that progressively reconstructs the low-bitwidth weights into higher bitwidth weights, and finally into full-precision weights. ProWD further selectively aggregates the model parameters to maximize the compatibility across bit-heterogeneous weights. We validate ProWD against relevant FL baselines on the benchmark datasets, using clients with varying bitwidths. Our ProWD largely outperforms the baseline FL algorithms as well as naive approaches (e.g. grouped averaging) under the proposed BHFL scenario.