Daily Papers

Standard-Model warm inflation (SMWI) makes QCD the microscopic origin of inflationary dissipation, so the real-time response of the gauge plasma enters the cosmological prediction. We show that a slowly relaxing gauge-helicity response cannot, in general, be absorbed into an effective friction coefficient and must instead remain dynamical. We therefore evolve the quark axial densities and a matched hard-helicity mode, with QCD sphalerons and an effective 2leftrightarrow3 channel generating both charge transfer and correlated stochastic sources in the full perturbation covariance system. The resulting backreaction is substantial but mainly indirect: gauge-helicity screening can reduce the warm dissipation ratio by an order-one fraction on the strong branch, while the 2leftrightarrow3 channel contributes only 0.2%-0.7% of the zero-density sphaleron friction directly, shifting the amplitude-normalized trajectory in both n_s and r_{rm vac}. The relevant trajectories, however, lack a parametrically broad hard-soft hierarchy and extend beyond strict linear response. The predictions should therefore be understood within the stated local Gaussian transport closure; a parameter-free Standard-Model (SM) result requires finite-affinity real-time SU(3) drift, susceptibility, and noise kernels.

The Princeton Axion Search (PXS) targets the mass window 0.8--2.1~μeV (corresponding to frequencies 200--500~MHz) at DFSZ sensitivity. The experiment, a haloscope, will use a cylindrical copper-plated aluminum cavity of 700~mm diameter and 1022~mm height, immersed in a 5~T solenoidal magnetic field. A 152~mm diameter tuning rod spanning the height of the cavity rotates to tune the primary mode resonance from 390--480~MHz, the frequency range for initial operations. We deduce the electric and magnetic field mode patterns using a combination of dielectric and metallic bead perturbations on the empty cavity. The measured mode frequencies and the TM_{010} field profile, as a function of tuning rod position, are in excellent agreement with simulations. We describe the effect of fabrication and assembly imperfections, including the bowing of end plates and tilt of the tuning rod. The welded seams and end-cap joints are demonstrated to not significantly degrade Q. We combine measurement and simulation to assess an uncertainty on form factor across the full tuning range. Our results validate PXS's cavity architecture and inform future searches for sub-μeV axions, in which large-volume high-Q structures are required to reach QCD sensitivity.

Scientific foundation models hold great promise for advancing nuclear and particle physics by improving analysis precision and accelerating discovery. Yet, progress in this field is often limited by the lack of openly available large scale datasets, as well as standardized evaluation tasks and metrics. Furthermore, the specialized knowledge and software typically required to process particle physics data pose significant barriers to interdisciplinary collaboration with the broader machine learning community. This work introduces a large, openly accessible dataset of 10 million simulated proton-proton collisions, designed to support self-supervised training of foundation models. To facilitate ease of use, the dataset is provided in a common NumPy format. In addition, it includes 70,000 labeled examples spanning three well defined downstream tasks: track finding, particle identification, and noise tagging, to enable systematic evaluation of the foundation model's adaptability. The simulated data are generated using the Pythia Monte Carlo event generator at a center of mass energy of sqrt(s) = 200 GeV and processed with Geant4 to include realistic detector conditions and signal emulation in the sPHENIX Time Projection Chamber at the Relativistic Heavy Ion Collider, located at Brookhaven National Laboratory. This dataset resource establishes a common ground for interdisciplinary research, enabling machine learning scientists and physicists alike to explore scaling behaviors, assess transferability, and accelerate progress toward foundation models in nuclear and high energy physics. The complete simulation and reconstruction chain is reproducible with the sPHENIX software stack. All data and code locations are provided under Data Accessibility.

Energy-energy correlators are constructed by averaging the number of charged particle pairs within jets, weighted by the product of their transverse momenta, as a function of the angular separation of the particles within a pair. They are sensitive to a multitude of perturbative and nonperturbative quantum chromodynamics phenomena in high-energy particle collisions. Using lead-lead data recorded with the CMS detector, energy-energy correlators inside high transverse momentum jets are measured in heavy ion collisions for the first time. The data are obtained at a nucleon-nucleon center-of-mass energy of 5.02 TeV and correspond to an integrated luminosity of 1.70 nb^{-1}. A similar analysis is done for proton-proton collisions at the same center-of-mass energy to establish a reference. The ratio of lead-lead to proton-proton energy-energy correlators reveals significant jet substructure modifications in the quark-gluon plasma. The results are compared to different models that incorporate either color coherence or medium response effects, where the two effects predict similar substructure modifications.

Detector simulation and event reconstruction will be computationally expensive for future e^+e^- collider programs and are currently critical bottlenecks for accurate feasibility studies. To address this challenge, we build a Parnassus model for the CLD detector concept. Parnassus is a framework for automatically tuning a surrogate model, in our case, a conditional flow matching neural network, to emulate a full detector simulation and reconstruction. We train on e^+e^-to Zto qbar q events at s=91.2 GeV processed through a Geant4 simulation of the CLD detector concept and the Pandora particle-flow reconstruction and reproduce single-particle kinematics, particle-IDs, and impact-parameter distributions. We also examine jet- and event-level features, inclusively and split by flavor, and find excellent fidelity, significantly better than the parameterized program Delphes. Furthermore, we train a transformer-based flavor tagger on the reconstructed particle-flow constituents and show that the surrogate preserves the b/c/s/q discrimination of the full CLD reconstruction. The Parnassus CLD model achieves a generation cost of about 1.2 ms (40 ms) per event on a single GPU (CPU), over three (two) orders of magnitude faster than full simulation and reconstruction. Our model is publicly available for feasibility and design studies.

A fully differential calculation in perturbative quantum chromodynamics is presented for the production of massive photon pairs at hadron colliders. All next-to-leading order perturbative contributions from quark-antiquark, gluon-(anti)quark, and gluon-gluon subprocesses are included, as well as all-orders resummation of initial-state gluon radiation valid at next-to-next-to-leading logarithmic accuracy. The region of phase space is specified in which the calculation is most reliable. Good agreement is demonstrated with data from the Fermilab Tevatron, and predictions are made for more detailed tests with CDF and DO data. Predictions are shown for distributions of diphoton pairs produced at the energy of the Large Hadron Collider (LHC). Distributions of the diphoton pairs from the decay of a Higgs boson are contrasted with those produced from QCD processes at the LHC, showing that enhanced sensitivity to the signal can be obtained with judicious selection of events.

Riemannian diffusion models draw inspiration from standard Euclidean space diffusion models to learn distributions on general manifolds. Unfortunately, the additional geometric complexity renders the diffusion transition term inexpressible in closed form, so prior methods resort to imprecise approximations of the score matching training objective that degrade performance and preclude applications in high dimensions. In this work, we reexamine these approximations and propose several practical improvements. Our key observation is that most relevant manifolds are symmetric spaces, which are much more amenable to computation. By leveraging and combining various ans\"{a}tze, we can quickly compute relevant quantities to high precision. On low dimensional datasets, our correction produces a noticeable improvement, allowing diffusion to compete with other methods. Additionally, we show that our method enables us to scale to high dimensional tasks on nontrivial manifolds. In particular, we model QCD densities on SU(n) lattices and contrastively learned embeddings on high dimensional hyperspheres.

A persistent and fascinating problem at the high energy colliders are jets. Often trying to observe physics underlying the hard interactions at colliders requires experimental cuts in phase space, defining several jet or beam regions. QCD being a gauge theory that readily decays into infra-red modes, correlations between jet regions is almost inevitable, spoiling the predictivity of fixed order QCD calculations. One is faced with the task of calculating the evolution of a reduced density matrix, where successively less energetic (jet) regions are integrated out, to gain control of the calculation. I relate the decay rates governing the flow into the IR to an effective field theory expansion in soft jets, allowing a systematic and resummed calculation of these rates, while further relating them to physically observable features of the QCD cascade. To demonstrate the utility of the soft jet expansion, I present a factorization theorem for a soft subjet collinearly splitting in and out of a parent fat jet. Using the resummation properties of this factorization theorem, I elucidate the structure of the subleading non-global logs (encoding the jet correlations) in the hemisphere jet mass distribution, as well as give a collinear improvement of the leading order resummation equation, the BMS equation. I compare to other approaches to subleading resummation of NGLs, and find the collinear improvement of the leading order equation removes the need for kinematic-dependent corrections in the IR averaging procedure of the reduced density matrix, so that no further large logs can be generated in the IR. Finally I end with speculation about connections with collinear improvements of the NLO B-JIMWLK hierarchy for small-x resummation.

A pronounced pyramid-shaped enhancement in the axion density power spectrum induced by the QCD phase transition is identified. The enhancement occurs near the horizon scale at the transition, with a characteristic comoving length scale comparable to the size of the Solar System, and amplifies the axion density perturbation by factors exceeding 3.5 times 10^{13} relative to the CDM case. Under the hilltop initial condition, coupling to radiation triggers this enhancement. The initial condition is related to the axion mass, suggesting that observation of the axion pyramid in cosmology may constrain the QCD axion mass.

Constituent quarks in a nucleon are the essential elements in the standard ``quark model" associated with the electric charge, spin, mass, and baryon number of a nucleon. Quantum Chromodynamics (QCD) describes nucleon as a composite object containing current quarks (valence quarks and sea (anti-)quarks) and gluons. These subatomic elements and their interactions are known to contribute in complex ways to the overall nucleon spin and mass. In the early development of QCD theory in the 1970s, an alternative hypothesis postulated that the baryon number might manifest itself through a non-perturbative configuration of gluon fields forming a Y-shaped topology known as the gluon junction. In this work, we propose to test such hypothesis by measuring (i) the Regge intercept of the net-baryon distributions for e+(p)Au collisions, (ii) baryon and charge transport in the isobaric ratio between e+Ru and e+Zr collisions, and (iii) target flavor dependence of proton and antiproton yields at large rapidity, transported from the hydrogen and deuterium targets in e+p(d) collisions. Our study indicates that these measurements at the EIC can help determine what carries the baryon number.

The total charm-quark production cross section per unit of rapidity dσ({rm cc})/dy, and the fragmentation fractions of charm quarks to different charm-hadron species f(crm h_{c}), are measured for the first time in p-Pb collisions at s_mathrm{NN} = 5.02 TeV at midrapidity (-0.96<y<0.04 in the centre-of-mass frame) using data collected by ALICE at the CERN LHC. The results are obtained based on all the available measurements of prompt production of ground-state charm-hadron species: D^{0}, D^{+}, D_s^{+}, and J/ψ mesons, and Λ_c^{+} and Ξ_{rm c}^{0} baryons. The resulting cross section is dσ({rm cc})/dy =219.6 pm 6.3;(stat.) {;}_{-11.8}^{+10.5};(syst.) {;}_{-2.9}^{+8.3};(extr.)pm 5.4;(BR)pm 4.6;(lumi.) pm 19.5;(rapidity shape)+15.0;(Ω_{rm c}^{0}) mb, which is consistent with a binary scaling of pQCD calculations from pp collisions. The measured fragmentation fractions are compatible with those measured in pp collisions at s = 5.02 and 13 TeV, showing an increase in the relative production rates of charm baryons with respect to charm mesons in pp and p-Pb collisions compared with e^{+e^{-}} and e^{-p} collisions. The p_T-integrated nuclear modification factor of charm quarks, R_pPb({rm cc})= 0.91 pm 0.04;{rm (stat.)}{}^{+0.08}_{-0.09};{rm (syst.)}{}^{+0.05}_{-0.03};{rm (extr.)}{}pm 0.03;{rm (lumi.)}, is found to be consistent with unity and with theoretical predictions including nuclear modifications of the parton distribution functions.

Rapid advancement of machine learning solutions has often coincided with the production of a test public data set. Such datasets reduce the largest barrier to entry for tackling a problem -- procuring data -- while also providing a benchmark to compare different solutions. Furthermore, large datasets have been used to train high-performing feature finders which are then used in new approaches to problems beyond that initially defined. In order to encourage the rapid development in the analysis of data collected using liquid argon time projection chambers, a class of particle detectors used in high energy physics experiments, we have produced the PILArNet, first 2D and 3D open dataset to be used for a couple of key analysis tasks. The initial dataset presented in this paper contains 300,000 samples simulated and recorded in three different volume sizes. The dataset is stored efficiently in sparse 2D and 3D matrix format with auxiliary information about simulated particles in the volume, and is made available for public research use. In this paper we describe the dataset, tasks, and the method used to procure the sample.

The last decade has seen a marked shift in how the internal structure of hadrons is understood. Modern experimental facilities, new theoretical techniques for the continuum bound-state problem and progress with lattice-regularised QCD have provided strong indications that soft quark+quark (diquark) correlations play a crucial role in hadron physics. For example, theory indicates that the appearance of such correlations is a necessary consequence of dynamical chiral symmetry breaking, viz. a corollary of emergent hadronic mass that is responsible for almost all visible mass in the universe; experiment has uncovered signals for such correlations in the flavour-separation of the proton's electromagnetic form factors; and phenomenology suggests that diquark correlations might be critical to the formation of exotic tetra- and penta-quark hadrons. A broad spectrum of such information is evaluated herein, with a view to consolidating the facts and therefrom moving toward a coherent, unified picture of hadron structure and the role that diquark correlations might play.

The decays of pseudoscalar mesons to real and virtual photons as well as neutrino-antineutrino pairs are considered in the framework of the dispersive method based on Anomaly Sum Rules. The contribution of singlet channel involving the new non-perturbative gluon form factor of virtual photon B(q^2) is systematically taken into account. The detailed analysis of its dependence on photon virtuality q^2 relying on the available data for meson transition fomfactors is performed. It is shown that B has quite a nontrivial structure at q^2 sim 1 GeV^2 which may be a signal of the existence of pseudoscalar glueball with a mass about 1.5-2 GeV. The calculation of the decay to νbar ν pairs leads to the compatibility with the result of Arnellos, Marciano and Parsa of 1982, when pion decay is considered neglecting the mixing effects. The account for these effects results, however, in the enhancement of pion branching ratio by a factor of 3, while that for eta decay is larger by several orders of magnitude. It is stressed, that dependence on the pair invariant mass is entirely defined by QCD and coincides with that of the meson transition form factor. The role of obtained results for the physics at HHaS detector at HIAF is discussed.

We present the RODEM Jet Datasets, a comprehensive collection of simulated large-radius jets designed to support the development and evaluation of machine-learning algorithms in particle physics. These datasets encompass a diverse range of jet sources, including quark/gluon jets, jets from the decay of W bosons, top quarks, and heavy new-physics particles. The datasets provide detailed substructure information, including jet kinematics, constituent kinematics, and track displacement details, enabling a wide range of applications in jet tagging, anomaly detection, and generative modelling.

The conventional grid-based approach used for storing and evaluating ordinary parton distribution functions (PDFs), as implemented for example in LHAPDF, becomes much more demanding for double parton distributions (DPDs). While a collinear PDF depends on one longitudinal momentum fraction and one factorization scale, an unequal-scale DPD depends on two momentum fractions and two independent factorization scales for every parton-flavor combination. Direct tabulation of this four-dimensional dependence therefore requires considerably more disk space and runtime memory. In this work, we develop a hybrid neural-network method for compact storage and fast evaluation of y-independent unequal-scale DPDs. The network compresses the reference grid by reproducing most of its values, while the original values are stored only at points where the neural prediction does not reach the required accuracy. In this way, the neural model captures the bulk of the grid, with a sparse table covering the remaining difficult points. For the GS09-based dense grid studied here, only 0.694% of the active flavor values need to be stored in the sparse table. Compared with the compressed dense grid, the hybrid method reduces the disk footprint by a factor of 10.6, peak memory use by a factor of 31.6, and initialization time by about a factor of 10.6. At the same time, its evaluation throughput reaches about 85% of the dense-grid rate. The method is implemented natively in C++ within PDFxTMDLib and requires neither Python nor PyTorch at runtime. The hybrid scheme therefore offers much lower memory and startup costs, with only a modest reduction in evaluation speed.

Exotic hadrons are a new class of hadronic states whose properties do not allow them to be classified as conventional quark-antiquark mesons or three quark baryons. Finding new and understanding established exotic states is the most important topic in today's hadron spectroscopy and a promising avenue to advance our knowledge on Quantum Chromodynamics in the non-perturbative regime. While several high-quality reviews on the topic exist, they are all at an advanced level. The present article aims to address new-comers to the field with a simple introduction to exotic hadrons with an emphasis on the experimental studies.

We generalize the Hamiltonian Monte Carlo algorithm with a stack of neural network layers and evaluate its ability to sample from different topologies in a two dimensional lattice gauge theory. We demonstrate that our model is able to successfully mix between modes of different topologies, significantly reducing the computational cost required to generated independent gauge field configurations. Our implementation is available at https://github.com/saforem2/l2hmc-qcd .

We give an overview of the light-front holographic approach to strongly coupled QCD, whereby a confining gauge theory, quantized on the light front, is mapped to a higher-dimensional anti de Sitter (AdS) space. The framework is guided by the AdS/CFT correspondence incorporating a gravitational background asymptotic to AdS space which encodes the salient properties of QCD, such as the ultraviolet conformal limit at the AdS boundary at z to 0, as well as modifications of the geometry in the large z infrared region to describe confinement and linear Regge behavior. There are two equivalent procedures for deriving the AdS/QCD equations of motion: one can start from the Hamiltonian equation of motion in physical space time by studying the off-shell dynamics of the bound state wavefunctions as a function of the invariant mass of the constituents. To a first semiclassical approximation, where quantum loops and quark masses are not included, this leads to a light-front Hamiltonian equation which describes the bound state dynamics of light hadrons in terms of an invariant impact variable ζ which measures the separation of the partons within the hadron at equal light-front time. Alternatively, one can start from the gravity side by studying the propagation of hadronic modes in a fixed effective gravitational background. Both approaches are equivalent in the semiclassical approximation. This allows us to identify the holographic variable z in AdS space with the impact variable ζ. Light-front holography thus allows a precise mapping of transition amplitudes from AdS to physical space-time. The internal structure of hadrons is explicitly introduced and the angular momentum of the constituents plays a key role.

This search targets the resonant production of lepton-enriched semivisible jets (SVJs) from a strongly coupled dark sector, using 138 fb^{-1} of proton-proton collision data collected with the CMS detector at the CERN LHC at s = 13 TeV. Two scenarios are investigated: jets enriched in all lepton flavors (SVJell signature) and jets predominantly enriched in tau leptons (SVJτ signature). The analysis focuses on final states in which the missing transverse momentum is aligned with jets containing nonisolated leptons. A dual machine-learning strategy is employed, using a graph neural network for jet identification and a fully connected neural network that combines jet- and event-level information to enhance signal sensitivity and background estimation. The signal models assume a heavy Z' mediator with a benchmark coupling of 0.25 to standard model quarks, together with prompt decays of unstable dark hadrons. In the SVJell scenario, mediator masses up to 4.7 TeV are excluded at 95% confidence level, while masses between 1.8 and 3.5 TeV are excluded in the SVJτ scenario. These results provide the first experimental constraints on lepton-enriched semivisible jets.

Very recently, the two-photon decay width of the η_b meson was computed with lattice QCD methods. This decay has not yet been measured. The knowledge of this width allows for the calculation of the η_b production cross section through photon-photon interactions in ultra-peripheral PbPb collisions. In this work we present this calculation, which is the first application of the lattice result. Since UPCs are gaining an increasing attention of the heavy ion community, we take the opportunity to perform a comprehensive study of the different ways of defining ultra-peripheral collisions and of the different ways to treat the equivalent photon flux.

The rapid data surge from the high-luminosity Large Hadron Collider introduces critical computational challenges requiring novel approaches for efficient data processing in particle physics. Quantum machine learning, with its capability to leverage the extensive Hilbert space of quantum hardware, offers a promising solution. However, current quantum graph neural networks (GNNs) lack robustness to noise and are often constrained by fixed symmetry groups, limiting adaptability in complex particle interaction modeling. This paper demonstrates that replacing the Lorentz Group Equivariant Block modules in LorentzNet with a dressed quantum circuit significantly enhances performance despite using nearly 5.5 times fewer parameters. Additionally, quantum circuits effectively replace MLPs by inherently preserving symmetries, with Lorentz symmetry integration ensuring robust handling of relativistic invariance. Our Lorentz-Equivariant Quantum Graph Neural Network (Lorentz-EQGNN) achieved 74.00% test accuracy and an AUC of 87.38% on the Quark-Gluon jet tagging dataset, outperforming the classical and quantum GNNs with a reduced architecture using only 4 qubits. On the Electron-Photon dataset, Lorentz-EQGNN reached 67.00% test accuracy and an AUC of 68.20%, demonstrating competitive results with just 800 training samples. Evaluation of our model on generic MNIST and FashionMNIST datasets confirmed Lorentz-EQGNN's efficiency, achieving 88.10% and 74.80% test accuracy, respectively. Ablation studies validated the impact of quantum components on performance, with notable improvements in background rejection rates over classical counterparts. These results highlight Lorentz-EQGNN's potential for immediate applications in noise-resilient jet tagging, event classification, and broader data-scarce HEP tasks.

The measure of indirect CP violation in the neutral kaon system, ε_K, is an important precision test of the Standard Model. A first-principles Standard Model prediction of ε_K requires evaluating the long-distance contribution in which the ΔS = 2 process proceeds via two ΔS = 1 operators. The non-perturbative nature of QCD in the relevant energy regimes requires a lattice QCD simulation. In this paper we present the two-loop, O(α_s) RI/SMOM - text{MS} matching factors required to renormalize a lattice QCD calculation of the long-distance contribution to ε_K.

We present a holographic model of QCD to study the strong coupling constant α_s from the low-energy region to the high-energy regime. The approach uses a double-dilaton background, which breaks conformal and chiral symmetries, while large-N_c corrections are incorporated to connect the holographic description with perturbative QCD. The model leads to an infrared fixed point and provides a smooth transition to the pQCD running. The resulting background also produces linear Regge trajectories for scalar, vector, and tensor states in reasonable agreement with experimental data.

We study the production of QCD axion dark matter (DM) via vacuum and kinetic misalignment mechanisms during an extended reheating period after the end of slow-roll inflation. With pre-inflationary Peccei-Quinn breaking and considering a monomial inflaton potential during reheating, we classify our study into three different perturbative reheating scenarios in which the inflaton decays into (i) a pair of Standard Model (SM)-like bosons, (ii) a pair of SM-like fermions, or (iii) exclusively into a pair of heavy right-handed neutrinos, which eventually decays into the SM final states after dominating the energy density of the Universe for an intermediate epoch. For each of these reheating scenarios, we study the details of QCD axion relic separately via vacuum and kinetic misalignment mechanisms. For different combinations of reheating, monomial inflaton potential and misalignment mechanisms, we identify the parameter space consistent with the observed DM relic density while satisfying other cosmological and laboratory constraints. We also check the scope of probing the currently allowed parameter space at axion-detection and gravitational wave (GW) experiments.

In high energy physics, self-supervised learning (SSL) methods have the potential to aid in the creation of machine learning models without the need for labeled datasets for a variety of tasks, including those related to jets -- narrow sprays of particles produced by quarks and gluons in high energy particle collisions. This study introduces an approach to learning jet representations without hand-crafted augmentations using a jet-based joint embedding predictive architecture (J-JEPA), which aims to predict various physical targets from an informative context. As our method does not require hand-crafted augmentation like other common SSL techniques, J-JEPA avoids introducing biases that could harm downstream tasks. Since different tasks generally require invariance under different augmentations, this training without hand-crafted augmentation enables versatile applications, offering a pathway toward a cross-task foundation model. We finetune the representations learned by J-JEPA for jet tagging and benchmark them against task-specific representations.

Neural scaling laws describe how model performance improves as a power law in compute, model size, and dataset size. While well-established for large language models, these relationships are emerging for large models in particle physics. As with language, empirical studies show that the performance scales as a power law. However, unlike natural language or image domains, fundamental physics has high-fidelity simulators that produce synthetic data cheaply. This favors scaling regimes where additional data is cheaper than additional parameters, and allows the pretraining dataset itself to be engineered to influence the scaling. For the task of classifying hadronic jets produced in collisions of high-energy particle beams, we show that the scaling behavior can be engineered towards requiring more data rather than larger models by inclusion of pretraining data which is more diverse and better aligned with the downstream classification task.

We describe an analysis comparing the pp elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in pp collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of s = 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the pp cross section. The two data sets disagree at the 3.4σ level and thus provide evidence for the t-channel exchange of a colorless, C-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same C-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in pp scattering. The combined significance of these results is larger than 5σ and is interpreted as the first observation of the exchange of a colorless, C-odd gluonic compound.

It is anticipated that the Large Hadron Collider (LHC) will collect data from oxygen-oxygen (O+O) collisions at a center-of-mass energy of s_{mathrm{NN}} = 7 TeV to explore the effects observed in high multiplicity proton-proton (p+p) and proton-lead (p+pb) collisions that closely related to lead-lead (Pb+Pb) collisions. These effects include azimuthal asymmetries in particle production, as well as variations in the abundances and momentum distributions across different hadron species, which are indicative of collective particle production mechanisms induced by the interactions in the presence of a QGP. The upcoming data on O+O collisions at the LHC are expected to constrain the model parameters and refine our understanding of theoretical models. In this work, the predicted transverse momentum (p_T) spectra, rapidity density distributions (dN/dy), particle yield ratios, and p_T-differential ratios of (multi)strange hadrons produced in O+O collisions at s_{mathrm{NN}} = 7 TeV using AMPT and EPOS4 models are presented. AMPT focuses on preformed hadronic interactions, while EPOS4 incorporates a QGP phase. Stronger radial flow in EPOS4 as compared to AMPT is also observed. AMPT incorporates some flow effects, but the implementation of full hydrodynamic flow in EPOS4 appears to be significantly more effective in reproducing the existing experimental data. Both models predict the final state multiplicity overlap with p+p, p+pb, and Pb+Pb collisions.

An amplitude analysis of B^-rightarrow D^- D^0 K_S^0 decays is performed using proton-proton collision data, corresponding to an integrated luminosity of 9,fb^{-1}, collected with the LHCb detector at center-of-mass energies of 7, 8, and 13,Tekern -0.1em V. A resonant structure of spin-parity 0^+ is observed in the D^0 K_S^0 invariant-mass spectrum with a significance of 5.3,sigma. The mass and width of the state, modeled with a Breit-Wigner lineshape, are determined to be 2883pm11pm6,Mekern -0.1em V!/c^2 and 87_{-47}^{+22}pm6,Mekern -0.1em V respectively, where the first uncertainties are statistical and the second systematic. These properties and the quark content are consistent with those of the open-charm tetraquark state T_{cs 0}^{*}(2870)^0 observed previously in the D^+ K^- final state of the B^-rightarrow D^- D^+ K^- decay. This result confirms the existence of the T_{cs 0}^{*}(2870)^0 state in a new decay mode. The T_{cs1}^{*}(2900)^0 state, reported in the B^-rightarrow D^- D^+ K^- decay, is also searched for in the D^0 K_S^0 invariant-mass spectrum of the B^- rightarrow D^- D^0 K_S^0 decay, without finding evidence for it.

The perturbative QCD corrections to the hadronic decay width of the W boson are currently known up to next-to-next-to-next-to-next-to-leading order (N^4LO), whereas the exact N^5LO correction remains unavailable owing to its formidable computational complexity. In this work, we estimate the N^5LO contributions by adopting Bayesian analysis (BA). Before performing the estimation, the Principle of Maximum Conformality (PMC) is employed to improve the precision of the initial scale-dependent perturbative series. Through recursive application of the renormalization group equation, non-conformal terms are absorbed into the strong running coupling, yielding a scheme-independent, scale-invariant perturbative series with improved convergence. The PMC procedure determines an effective coupling α_s(Q_*), with the PMC scale fixed as Q_* = 100.102~GeV at next-to-next-to-leading logarithmic accuracy. Based on the improved and more precise series, the 95.5% BA credible interval yields an uncertainty of Δδ_QCD|_{PMC, BA}^{N^5LO} = pm 1.0times 10^{-5}. The resulting hadronic branching ratio is B(Wto hadrons)|_PMC = (65.84pm 1.54)%, which is consistent with experimental data within reasonable errors.

In this work we estimate the first unknown QCD correction to the decay of the Higgs boson into gluons, Hto gg, in the heavy-top limit using Padé approximants built to the perturbative series and to its Borel transform. In the process, we also obtain estimates for the first unknown coefficients of the QCD β function, of the QCD decoupling relation, and of the gluonium correlator. We also provide an updated prediction for the first unknown coefficient of Γ(Hto bb). We determine the polynomial dependence of the perturbative coefficients on the number of quark flavors, n_f. We point out that the large-n_f result for Hto gg can be obtained from results for the gluonium correlator already available in the literature. The coefficient of the highest power of n_f is then imposed as a constraint and is also used as a new test to discard unreliable approximants. The method is validated through the postdiction of the last known coefficient of the series. Our model-independent estimate for the yet unknown coefficient of order α_s^7 of Γ(Hto gg) is -312pm 15 (in the mathrm{MS} scheme with μ=m_H, where m_H is the Higgs mass). With our estimate the residual renormalization-scale dependence of Γ(Hto gg) is reduced by a factor of almost 1.5.

Baryons in the holographic Witten-Sakai-Sugimoto model are described by instanton solutions on the flavor branes. A commonly used approximation for dense baryonic matter replaces the many-instanton solution by a simpler, spatially homogeneous, ansatz, which requires a discontinuity in the holographic direction of the non-abelian gauge field in order to account for topological baryon number. We point out that the simplest configuration with a single jump - often used in previous studies - results in matter at saturation density that is much stiffer than real-world nuclear matter. This is improved, although not completely remedied, by adding a second jump. We present a systematic discussion of all possible configurations up to four jumps, dynamically computing locations of and behavior at the discontinuities. We find solutions that continuously connect to those based on pointlike baryons, thus, for the first time, establishing a concrete link between the instantonic and homogeneous pictures. This is supported by translating the multi-jump profiles of the gauge field into gauge invariant multi-layer charge distributions. The most important of our novel configurations has a block-like structure in the bulk, becomes pointlike at low density and/or large coupling, and is energetically preferred over all previously studied configurations. Therefore, our work lays the ground for improved predictions from holography for dense nuclear matter in neutron stars.

Jet taggers built on the Lund declustering tree encode QCD radiation structure in the inputs and process it with graph networks. We ask whether the tree itself can also constrain the computation, and what becomes accessible when it does. For this, we construct a novel quantum-inspired Tree Tensor Network (TTN), where a single tensor core is shared among the internal nodes of the Cambridge/Aachen declustering tree, employing Lund coordinates, and with no particle-identification or detector-level information. The construction is based on a strong prior on the radiation history rather than on the constituents, complementary to compact equivariant taggers. Because the same learned map acts identically at every node, the trained model can be evaluated on truncated trees and its latent space compared across recursions, and used to localise where on the Lund jet plane the Pythia and Herwig jet representations diverge, showing the regions of generator-dependent concentration. The χ=8 model has 4014 trainable parameters against approximately 391,000 for LundNet. We evaluate boosted top tagging and quark/gluon discrimination at particle level on Pythia and Herwig samples, in both native (PythiatoPythia) and transfer (PythiatoHerwig) configurations. Despite differing in capacity by two orders of magnitude, the TTN reaches native performance close to LundNet in quark/gluon discrimination, slightly underperforming in top tagging, with a similar Pythia-to-Herwig transfer behavior in both tasks. Finally, we show the behavior of the network as a function of the bond dimension, and as a function of the perturbative scale.

We study various machine learning based algorithms for performing accurate jet flavor classification on field-programmable gate arrays and demonstrate how latency and resource consumption scale with the input size and choice of algorithm. These architectures provide an initial design for models that could be used for tagging at the CERN LHC during its high-luminosity phase. The high-luminosity upgrade will lead to a five-fold increase in its instantaneous luminosity for proton-proton collisions and, in turn, higher data volume and complexity, such as the availability of jet constituents. Through quantization-aware training and efficient hardware implementations, we show that O(100) ns inference of complex architectures such as deep sets and interaction networks is feasible at a low computational resource cost.

Foundation Models are neural networks that are capable of simultaneously solving many problems. Large Language Foundation Models like ChatGPT have revolutionized many aspects of daily life, but their impact for science is not yet clear. In this paper, we use a new Foundation Model for hadronic jets to solve three key challenges in collider physics. In particular, we show how experiments can (1) save significant computing power when developing reconstruction algorithms, (2) perform a complete uncertainty quantification for high-dimensional measurements, and (3) search for new physics with model agnostic methods using low-level inputs. In each case, there are significant computational or methodological challenges with current methods that limit the science potential of deep learning algorithms. By solving each problem, we take jet Foundation Models beyond proof-of-principle studies and into the toolkit of practitioners.

We consider classes of translationally invariant black hole solutions whose equations of state closely resemble that of QCD at zero chemical potential. We use these backgrounds to compute the ratio zeta/s of bulk viscosity to entropy density. For a class of black holes that exhibits a first order transition, we observe a sharp rise in zeta/s near T_c. For constructions that exhibit a smooth cross-over, like QCD does, the rise in zeta/s is more modest. We conjecture that divergences in zeta/s for black hole horizons are related to extrema of the entropy density as a function of temperature.

Beauty-hadron production in proton-nucleus collisions is a particularly powerful probe of cold nuclear matter (CNM) effects: thanks to the large beauty-quark mass, the production is initiated in early hard scatterings and is calculable in perturbative QCD, while the modifications observed in nuclear collisions directly constrain the nuclear parton distribution functions (nPDFs) in a kinematic region complementary to that accessed by charm. Precisely quantifying these effects is a prerequisite for isolating possible signatures of quark-gluon plasma formation in heavy-ion collisions. In this work, the production of open beauty hadrons in p-Pb collisions at s_{mathrm{NN}} = 5.02 and 8.16~TeV is studied via a data-driven Bayesian unfolding of ALICE and LHCb measurements of non-prompt D^{0} and J/ψ mesons. The unfolded p_{T}- and y-differential cross sections are mutually consistent across decay channels and compatible with directly reconstructed beauty-hadron measurements. The nuclear modification factor R_{pPb} is reported as a function of transverse momentum and rapidity, providing the first unfolding-based result spanning -4.0 < y < 4.0 of beauty-hadron R_{pPb} covering the full rapidity range, with a precision comparable to or better than that of existing data. The results are compared with calculations based on nPDFs and can provide valuable constraints for future global nPDF fits. The total inclusive B hadron production cross section in p-Pb collisions is also reported. A weaker CNM suppression is observed for beauty hadrons than for charm hadrons, consistent with the expected mass hierarchy of cold-nuclear-matter effects.

In this work, we present a new approach for fast tracking on multiwire proportional chambers with neural networks. The tracking networks are developed and adapted for the first-level trigger at hadron collider experiments. We use Monte Carlo samples generated by Geant4 with a custom muon chamber, which resembles part of the thin gap chambers from the ATLAS experiment, for training and performance evaluations. The chamber has a total of seven gas gaps, where the first and last gas gaps are displaced by ~1.5 m. Each gas gap has 50 channels with a size of 18-20 mm. Two neural network models are developed and presented: a convolutional neural network and a neural network optimized for the detector configuration of this study. In the latter network, a convolution layer is provided for each of three groups formed from 2-3 gas gaps of the chamber, and the outputs are fed into multilayer perceptrons in sequence. Both networks are transformed into hardware description language and implemented in Virtex UltraScale+ FPGA. The angular resolution is 2 mrad, which is comparable to the maximum resolution of the detector estimated by the minimum chi2 method. The latency achieved by the implemented firmware is less than 100 ns, and the throughput rate is 160 MHz.

The superfluid phase transition dynamics and associated spontaneous vortex formation with the crossing of the critical temperature in a disk geometry is studied in the framework of the AdS/CFT correspondence by solving the Einstein-Abelian-Higgs model in an AdS_4 black hole. For a slow quench, the vortex density admits a universal scaling law with the cooling rate as predicted by the Kibble-Zurek mechanism (KZM), while for fast quenches, the density shows a universal scaling behavior as a function of the final temperature, that lies beyond the KZM prediction. The vortex number distribution in both the power-law and saturation regimes can be approximated by a normal distribution. However, the study of the universal scaling of the cumulants reveals non-normal features and indicates that vortex statistics in the newborn superfluid is best described by the Poisson binomial distribution, previously predicted in the KZM regime [Phys. Rev. Lett. 124, 240602 (2020)]. This is confirmed by studying the cumulant scalings as a function of the quench time and the quench depth. Our work supports the existence of a universal defect number distribution that accommodates the KZM scaling, its breakdown at fast quenches, and the additional universal scaling laws as a function of the final value of the control parameter.

About 90% of the computing resources available to the LHCb experiment has been spent to produce simulated data samples for Run 2 of the Large Hadron Collider at CERN. The upgraded LHCb detector will be able to collect larger data samples, requiring many more simulated events to analyze the data to be collected in Run 3. Simulation is a key necessity of analysis to interpret signal, reject background and measure efficiencies. The needed simulation will far exceed the pledged resources, requiring an evolution in technologies and techniques to produce these simulated data samples. In this contribution, we discuss Lamarr, a Gaudi-based framework to speed-up the simulation production parameterizing both the detector response and the reconstruction algorithms of the LHCb experiment. Deep Generative Models powered by several algorithms and strategies are employed to effectively parameterize the high-level response of the single components of the LHCb detector, encoding within neural networks the experimental errors and uncertainties introduced in the detection and reconstruction phases. Where possible, models are trained directly on real data, statistically subtracting any background components by applying appropriate reweighing procedures. Embedding Lamarr in the general LHCb Gauss Simulation framework allows to combine its execution with any of the available generators in a seamless way. The resulting software package enables a simulation process independent of the detailed simulation used to date.

The J-PARC Hadron Experimental Facility was constructed with an aim to explore the origin and evolution of matter in the universe through the experiments with intense particle beams. In the past decade, many results on particle and nuclear physics have been obtained at the present facility. To expand the physics programs to unexplored regions never achieved, the extension project of the Hadron Experimental Facility has been extensively discussed. This white paper presents the physics of the extension of the Hadron Experimental Facility for resolving the issues in the fields of the strangeness nuclear physics, hadron physics, and flavor physics.

Quantum liquids are characterized by the distinctive properties such as the low temperature behavior of heat capacity and the spectrum of low-energy quasiparticle excitations. In particular, at low temperature, Fermi liquids exhibit the zero sound, predicted by L. D. Landau in 1957 and subsequently observed in liquid He-3. In this paper, we ask a question whether such a characteristic behavior is present in theories with holographically dual description. We consider a class of gauge theories with fundamental matter fields whose holographic dual in the appropriate limit is given in terms of the Dirac-Born-Infeld action in AdS_{p+1} space. An example of such a system is the N=4 SU(N_c) supersymmetric Yang-Mills theory with N_f massless N=2 hypermultiplets at strong coupling, finite baryon number density, and low temperature. We find that these systems exhibit a zero sound mode despite having a non-Fermi liquid type behavior of the specific heat. These properties suggest that holography identifies a new type of quantum liquids.

We perform a lattice QCD calculation of the hadronic light-by-light contribution to (g-2)_μ at the SU(3) flavor-symmetric point m_π=m_Ksimeq 420,MeV. The representation used is based on coordinate-space perturbation theory, with all QED elements of the relevant Feynman diagrams implemented in continuum, infinite Euclidean space. As a consequence, the effect of using finite lattices to evaluate the QCD four-point function of the electromagnetic current is exponentially suppressed. Thanks to the SU(3)-flavor symmetry, only two topologies of diagrams contribute, the fully connected and the leading disconnected. We show the equivalence in the continuum limit of two methods of computing the connected contribution, and introduce a sparse-grid technique for computing the disconnected contribution. Thanks to our previous calculation of the pion transition form factor, we are able to correct for the residual finite-size effects and extend the tail of the integrand. We test our understanding of finite-size effects by using gauge ensembles differing only by their volume. After a continuum extrapolation based on four lattice spacings, we obtain a_μ^{rm hlbl} = (65.4pm 4.9 pm 6.6)times 10^{-11}, where the first error results from the uncertainties on the individual gauge ensembles and the second is the systematic error of the continuum extrapolation. Finally, we estimate how this value will change as the light-quark masses are lowered to their physical values.

The production of a top-quark pair, the heaviest known elementary particle, in association with a light jet is a key process for studying the properties of the Standard Model of Particle Physics. Due to its significance as a signal process with considerable sensitivity to the top-quark mass and as a background process for new physics searches, it is crucial to predict differential cross sections with high precision. In this article, we present, for the first time, predictions for various kinematical observables at next-to-next-to-leading order in Quantum Chromodynamics. The perturbative behavior is analyzed, and uncertainties arising from missing higher-order contributions are substantially reduced. The necessary two-loop amplitudes have been evaluated in the leading-color approximation, and we provide estimates for the impact of the missing contributions.

We present a trainable framework for efficiently generating gauge configurations, and discuss ongoing work in this direction. In particular, we consider the problem of sampling configurations from a 4D SU(3) lattice gauge theory, and consider a generalized leapfrog integrator in the molecular dynamics update that can be trained to improve sampling efficiency. Code is available online at https://github.com/saforem2/l2hmc-qcd.

We present a transformer architecture-based foundation model for tasks at high-energy particle colliders such as the Large Hadron Collider. We train the model to classify jets using a self-supervised strategy inspired by the Joint Embedding Predictive Architecture. We use the JetClass dataset containing 100M jets of various known particles to pre-train the model with a data-centric approach -- the model uses a fraction of the jet constituents as the context to predict the embeddings of the unseen target constituents. Our pre-trained model fares well with other datasets for standard classification benchmark tasks. We test our model on two additional downstream tasks: top tagging and differentiating light-quark jets from gluon jets. We also evaluate our model with task-specific metrics and baselines and compare it with state-of-the-art models in high-energy physics. Project site: https://hep-jepa.github.io/

According to the generally accepted phase diagram of QCD, at low temperature and high baryon number density the chiral phase transition of QCD is of first order and the co-existence of the Nambu-Goldstone phase and the Wigner phase should appear. This is in conflict with the usual claim that the quark gap equation has no Wigner solution in the case of nonzero current quark mass. In this paper we analyze the reason why the Wigner solution does not exist in the usual treatment and try to propose a new approach to discuss this question. As a first step, we adopt a modified Nambu-Jona-Lasinio (NJL) model to study the Wigner solution at finite current quark mass. We then generalize this approach to the case of finite chemical potential and discuss partial restoration of chiral symmetry at finite chemical potential and compare our results with those in the normal NJL model.

Training multi-billion to trillion-parameter language models efficiently on GPU clusters requires leveraging multiple parallelism strategies. We present Galvatron, a novel open-source framework (dubbed 'Optimus-Megatron' in the implementation) that dynamically combines data parallelism, tensor model parallelism, and pipeline parallelism to optimize training throughput. Built atop PyTorch and integrating NVIDIA's Megatron-LM and Microsoft's DeepSpeed, Galvatron automatically selects and adjusts parallelism strategies in real time based on model architecture, hardware, and training dynamics. This paper details Galvatron's key features -- automatic hybrid parallelism selection, layer-wise and phase-wise strategy optimization, and runtime adaptation -- and contrasts them with existing static frameworks. We describe the system's technical stack, including its use of DeepSpeed's ZeRO and NCCL communication, and provide an in-depth implementation overview of its core modules (profilers, strategy selector, parallelism manager). We then illustrate how Galvatron can be seamlessly integrated into existing training pipelines with minimal code modifications, providing companies a plug-and-play solution for efficient large-model training. Finally, we situate Galvatron in context with related efforts (NVIDIA Megatron-LM, Microsoft DeepSpeed, Google GShard, Meta FairScale, etc.), highlighting how it advances the state of the art in distributed deep learning. References to the GitHub repository and relevant literature are provided throughout.

The presence of strong electron clouds in the quadrupole magnetic field regions of the Large Hadron Collider (LHC) leads to considerable heating that poses challenges for the cryogenic cooling system, and under certain conditions to proton beam quality deterioration. Research is being conducted on laser-treated inner beam screen surfaces for the upgraded High-Luminosity LHC to mitigate this issue. Laser-induced surface structuring, a technique that effectively roughens surfaces, has been shown to reduce secondary electron emission; an essential factor in controlling electron cloud formation. Conversely, the resulting surface roughening also alters the material's surface impedance, potentially impacting beam stability and increasing beam-induced resistive wall heating. Different laser treatment patterns have been applied to LHC beam screens to estimate this potential impact and assessed for their microwave responses.

Detailed detector simulation is the major consumer of CPU resources at LHCb, having used more than 90% of the total computing budget during Run 2 of the Large Hadron Collider at CERN. As data is collected by the upgraded LHCb detector during Run 3 of the LHC, larger requests for simulated data samples are necessary, and will far exceed the pledged resources of the experiment, even with existing fast simulation options. An evolution of technologies and techniques to produce simulated samples is mandatory to meet the upcoming needs of analysis to interpret signal versus background and measure efficiencies. In this context, we propose Lamarr, a Gaudi-based framework designed to offer the fastest solution for the simulation of the LHCb detector. Lamarr consists of a pipeline of modules parameterizing both the detector response and the reconstruction algorithms of the LHCb experiment. Most of the parameterizations are made of Deep Generative Models and Gradient Boosted Decision Trees trained on simulated samples or alternatively, where possible, on real data. Embedding Lamarr in the general LHCb Gauss Simulation framework allows combining its execution with any of the available generators in a seamless way. Lamarr has been validated by comparing key reconstructed quantities with Detailed Simulation. Good agreement of the simulated distributions is obtained with two-order-of-magnitude speed-up of the simulation phase.

For decades, researchers have developed task-specific models to address scientific challenges across diverse disciplines. Recently, large language models (LLMs) have shown enormous capabilities in handling general tasks; however, these models encounter difficulties in addressing real-world scientific problems, particularly in domains involving large-scale numerical data analysis, such as experimental high energy physics. This limitation is primarily due to BPE tokenization's inefficacy with numerical data. In this paper, we propose a task-agnostic architecture, BBT-Neutron, which employs a binary tokenization method to facilitate pretraining on a mixture of textual and large-scale numerical experimental data. We demonstrate the application of BBT-Neutron to Jet Origin Identification (JoI), a critical categorization challenge in high-energy physics that distinguishes jets originating from various quarks or gluons. Our results indicate that BBT-Neutron achieves comparable performance to state-of-the-art task-specific JoI models. Furthermore, we examine the scaling behavior of BBT-Neutron's performance with increasing data volume, suggesting the potential for BBT-Neutron to serve as a foundational model for particle physics data analysis, with possible extensions to a broad spectrum of scientific computing applications for Big Science experiments, industrial manufacturing and spacial computing. The project code is available at https://github.com/supersymmetry-technologies/bbt-neutron.

Machine learning has emerged as a powerful solution to the modern challenges in accelerator physics. However, the limited availability of beam time, the computational cost of simulations, and the high-dimensionality of optimisation problems pose significant challenges in generating the required data for training state-of-the-art machine learning models. In this work, we introduce Cheetah, a PyTorch-based high-speed differentiable linear-beam dynamics code. Cheetah enables the fast collection of large data sets by reducing computation times by multiple orders of magnitude and facilitates efficient gradient-based optimisation for accelerator tuning and system identification. This positions Cheetah as a user-friendly, readily extensible tool that integrates seamlessly with widely adopted machine learning tools. We showcase the utility of Cheetah through five examples, including reinforcement learning training, gradient-based beamline tuning, gradient-based system identification, physics-informed Bayesian optimisation priors, and modular neural network surrogate modelling of space charge effects. The use of such a high-speed differentiable simulation code will simplify the development of machine learning-based methods for particle accelerators and fast-track their integration into everyday operations of accelerator facilities.

Jet tagging at the Large Hadron Collider increasingly relies on deep learning models trained on massive simulated datasets, leading to high computational costs and limited robustness to detector mismodeling. We introduce JetParticle-JEPA (JP-JEPA), a self-supervised Joint-Embedding Predictive Architecture that learns physically meaningful jet representations directly from continuous particle clouds without tokenization or reconstruction of raw inputs. Built on a Particle Transformer backbone, JP-JEPA predicts latent representations of masked particles while preserving fine-grained kinematic correlations. On the JetClass benchmark, JP-JEPA achieves performance comparable to fully supervised state-of-the-art methods on the full dataset, surpasses supervised baselines in low-label regimes, and significantly outperforms existing SSL approaches. On Top Quark and Quark-Gluon Tagging benchmarks, it remains on par with supervised methods. The learned representations also exhibit strong robustness to missing detector information and improved uncertainty behavior, highlighting JP-JEPA as a promising foundation-model framework for robust and data-efficient jet physics at the LHC.

We introduce LeapfrogLayers, an invertible neural network architecture that can be trained to efficiently sample the topology of a 2D U(1) lattice gauge theory. We show an improvement in the integrated autocorrelation time of the topological charge when compared with traditional HMC, and look at how different quantities transform under our model. Our implementation is open source, and is publicly available on github at https://github.com/saforem2/l2hmc-qcd.

Future collider experiments require unprecedented precision in measurements of Higgs, electroweak, and flavour observables, placing stringent demands on event reconstruction. The achievable precision on Higgs couplings scales directly with the resolution on visible final state particles and their invariant masses. Current particle flow algorithms rely on detector specific clustering, limiting flexibility during detector design. Here we present an end-to-end global event reconstruction approach that maps charged particle tracks and calorimeter and muon hits directly to particle level objects. The method combines geometric algebra transformer networks with object condensation based clustering, followed by dedicated networks for particle identification and energy regression. Our approach is benchmarked on fully simulated electron positron collisions at FCC-ee using the CLD detector concept. It outperforms the state-of-the-art rule-based algorithm by 10--20\% in relative reconstruction efficiency, achieves up to two orders of magnitude reduction in fake-particle rates for charged hadrons, and improves visible energy and invariant mass resolution by 22\%. By decoupling reconstruction performance from detector-specific tuning, this framework enables rapid iteration during the detector design phase of future collider experiments.

Longitudinally hollow bunches provide one means to mitigate the impact of transverse space charge. The hollow distributions are created via dipolar parametric excitation during acceleration in CERN's Proton Synchrotron Booster. We present simulation work and beam measurements. Particular emphasis is given to the alleviation of space charge effects on the long injection plateau of the downstream Proton Synchrotron machine, which is the main goal of this study.