Daily Papers

Fault-tolerant quantum computing (FTQC) introduces substantial systems-level complexity through quantum error correction (QEC), making debugging FTQC programs challenging. Existing quantum debugging approaches primarily target logical-level circuits and do not naturally support debugging within realistic FTQC execution flows. We present SynDebug, the first systems-level debugging framework for FTQC programs. SynDebug introduces lightweight assertion-based debugging primitives that operate directly within encoded FTQC infrastructures while avoiding additional logical surface area and minimizing temporal overhead. We evaluate SynDebug across multiple QEC code families, code distances, and encoded workloads, including state preparation, entanglement validation, and Shor-style programs. Our results demonstrate that SynDebug enables practical FTQC debugging with an average 1.8% additional circuit depth overhead (0% in most cases) and no measurable increase in the logical error rate, showing that systems-level debugging for large-scale FTQC applications is both feasible and practical.

We review thirteen generative systems and five supporting datasets for quantum circuit and quantum code generation, identified through a structured scoping review of Hugging Face, arXiv, and provenance tracing (January-February 2026). We organize the field along two axes: artifact type (Qiskit code, OpenQASM programs, circuit graphs); crossed with training regime (supervised fine-tuning, verifier-in-the-loop RL, diffusion/graph generation, agentic optimization); and systematically apply a three-layer evaluation framework covering syntactic validity, semantic correctness, and hardware executability. The central finding is that while all reviewed systems address syntax and most address semantics to some degree, none reports end-to-end evaluation on quantum hardware (Layer 3b), leaving a significant gap between generated circuits and practical deployment. Scope note: quantum code refers throughout to quantum program artifacts (QASM, Qiskit); we do not cover generation of quantum error-correcting codes (QEC).

Large Language Models (LLMs) trained on code are revolutionizing the software development process. Increasingly, code LLMs are being integrated into software development environments to improve the productivity of human programmers, and LLM-based agents are beginning to show promise for handling complex tasks autonomously. Realizing the full potential of code LLMs requires a wide range of capabilities, including code generation, fixing bugs, explaining and documenting code, maintaining repositories, and more. In this work, we introduce the Granite series of decoder-only code models for code generative tasks, trained with code written in 116 programming languages. The Granite Code models family consists of models ranging in size from 3 to 34 billion parameters, suitable for applications ranging from complex application modernization tasks to on-device memory-constrained use cases. Evaluation on a comprehensive set of tasks demonstrates that Granite Code models consistently reaches state-of-the-art performance among available open-source code LLMs. The Granite Code model family was optimized for enterprise software development workflows and performs well across a range of coding tasks (e.g. code generation, fixing and explanation), making it a versatile all around code model. We release all our Granite Code models under an Apache 2.0 license for both research and commercial use.

Agent skill libraries are becoming routable software assets: a retrieved skill can contribute instructions, scripts, resource bindings, and execution assumptions to an agent. This makes retrieval failures more specific than broad irrelevance. A system can find the right capability family yet expose the wrong same-capability representative. We study this failure as same-capability risk-exposure retrieval. Each benchmark unit pairs a helpful skill with a query-specific risky sibling that shares the capability family but differs on an execution-controlling contract, such as the required resource, precondition, procedure, or artifact. We introduce SameCapRisk-Bench, an auditable benchmark with 1,190 skill-risk units and 1,686 evaluation query cases: 694 marked-sibling units under public library pressure and 496 hard role-flip units where the same two skills swap helpful/risky roles across paired queries. The release records admission evidence, cue/leakage checks, source hashes, family relations, and fixed candidate pools. The benchmark reports helpful ranking together with harmful sibling rate (HSR@K), the top-K exposure of the marked risky sibling. On this benchmark, public SkillRouter, SkillRet, and R3-Skill retrieve helpful skills at high Recall@3 (0.848--0.888) but also expose marked risky siblings frequently (HSR@3 0.346--0.372). A fully public score-and-cluster pipeline lowers HSR@3 to 0.128--0.182, with Recall@3 of 0.713--0.776. Under a benchmark-trained reference scorer, public text-cluster and controlled resolvers reach HSR@3 0.012 and 0.007; the latter attains Recall@3 0.833. Skill retrieval should therefore report both capability matching and same-family risk exposure, with HSR serving as a targeted exposure certificate for fixed skill libraries.

The surface code family is a promising approach to implementing fault-tolerant quantum computations. Universal fault-tolerance requires error-corrected non-Clifford operations, in addition to Clifford gates, and for the former, it is imperative to experimentally demonstrate additional resources known as magic states. Another challenge is to efficiently embed surface codes into quantum hardware with connectivity constraints. This work simultaneously addresses both challenges by employing a qubit-efficient rotated heavy-hexagonal surface code for IBM quantum processors (ibm\_fez) and implementing the magic state injection protocol. Our work reports error thresholds for both logical bit- and phase-flip errors, of approx0.37% and approx0.31%, respectively, which are higher than the threshold values previously reported with traditional embedding. The post-selection-based preparation of logical magic states |H_Lrangle and |T_Lrangle achieve fidelities of 0.8806pm0.0002 and 0.8665pm0.0003, respectively, which are both above the magic state distillation threshold. Additionally, we report the minimum fidelity among injected arbitrary single logical qubit states as 0.8356pm0.0003. Our work demonstrates the potential for realising non-Clifford logical gates by producing high-fidelity logical magic states on IBM quantum devices.

QSE is emerging as a critical discipline to make quantum computing accessible to a broader developer community; however, most quantum development environments still require developers to engage with low-level details across the software stack - including problem encoding, circuit construction, algorithm configuration, hardware selection, and result interpretation - making them difficult for classical software engineers to use. To bridge this gap, we present C2|Q>, a hardware-agnostic quantum software development framework that translates specific types of classical specifications into quantum-executable programs while preserving methodological rigor. The framework applies modular SE principles by classifying the workflow into three core modules: an encoder that classifies problems, produces Quantum-Compatible Formats, and constructs quantum circuits, a deployment module that generates circuits and recommends hardware based on fidelity, runtime, and cost, and a decoder that interprets quantum outputs into classical solutions. In evaluation, the encoder module achieved a 93.8% completion rate, the hardware recommendation module consistently selected the appropriate quantum devices for workloads scaling up to 56 qubits. End-to-end experiments on 434 Python programs and 100 JSON problem instances show that the full C2|Q> workflow executes reliably on simulators and can be deployed successfully on representative real quantum hardware, with empirical runs limited to small- and medium-sized instances consistent with current NISQ capabilities. These results indicate that C2|Q> lowers the entry barrier to quantum software development by providing a reproducible, extensible toolchain that connects classical specifications to quantum execution. The open-source implementation of C2|Q> is available at https://github.com/C2-Q/C2Q and as a Python package at https://pypi.org/project/c2q-framework/.

We introduce CRPE (Code Reasoning Process Enhancer), an innovative three-stage framework for data synthesis and model training that advances the development of sophisticated code reasoning capabilities in large language models (LLMs). Building upon existing system-1 models, CRPE addresses the fundamental challenge of enhancing LLMs' analytical and logical processing in code generation tasks. Our framework presents a methodologically rigorous yet implementable approach to cultivating advanced code reasoning abilities in language models. Through the implementation of CRPE, we successfully develop an enhanced COT-Coder that demonstrates marked improvements in code generation tasks. Evaluation results on LiveCodeBench (20240701-20240901) demonstrate that our COT-Coder-7B-StepDPO, derived from Qwen2.5-Coder-7B-Base, with a pass@1 accuracy of 21.88, exceeds all models with similar or even larger sizes. Furthermore, our COT-Coder-32B-StepDPO, based on Qwen2.5-Coder-32B-Base, exhibits superior performance with a pass@1 accuracy of 35.08, outperforming GPT4O on the benchmark. Overall, CRPE represents a comprehensive, open-source method that encompasses the complete pipeline from instruction data acquisition through expert code reasoning data synthesis, culminating in an autonomous reasoning enhancement mechanism.

Large language models are increasingly used to generate SystemVerilog Assertions from natural-language specifica- tions and register-transfer-level designs. Existing datasets and benchmarks support important goals such as large- scale training, formal evaluation, specification-to-assertion generation, and mutation-based testing. A complemen- tary need is to study whether a generated assertion cap- tures externally observable behavior or depends on inci- dental details of one RTL implementation. We present EquivSVA, a formally verified dataset organized around behavior families. Each family contains four structurally distinct RTL implementations of the same externally ob- servable behavior, shared interface-level gold properties, three controlled mutants, and formal-validation evidence. EquivSVA contains 120 behavior families across 12 cat- egories, 480 reference RTL implementations, 914 gold properties, and 360 mutants. Every final family passes a fixed 17-job validation suite covering RTL equivalence, gold-property proofs, property reachability, mutant dis- tinguishability, and gold-property checks on mutants. We also provide fixed family-safe train, development, and test splits. As a small demonstration of the analyses en- abled by the dataset, we evaluate the publicly released, Apache-2.0-licensed Qwen2.5-Coder-7B-Instruct model on the held-out test split. Of 293 interface-only generated properties, 93 are formally sound, and the number of sound properties varies across equivalent implementations for 14 of 24 test families. These results illustrate how behavior-family organization can support controlled stud- ies of assertion-generation robustness without requiring changes in intended functionality. The dataset, generators, validation scripts, and case-study artifacts are publicly released at https://github.com/aditigupta96/EquivSVA.

With the increasing code reasoning capabilities of existing large language models (LLMs) and breakthroughs in reasoning models like OpenAI o1 and o3, there is a growing need to develop more challenging and comprehensive benchmarks that effectively test their sophisticated competition-level coding abilities. Existing benchmarks, like LiveCodeBench and USACO, fall short due to the unavailability of private test cases, lack of support for special judges, and misaligned execution environments. To bridge this gap, we introduce CodeElo, a standardized competition-level code generation benchmark that effectively addresses all these challenges for the first time. CodeElo benchmark is mainly based on the official CodeForces platform and tries to align with the platform as much as possible. We compile the recent six months of contest problems on CodeForces with detailed information such as contest divisions, problem difficulty ratings, and problem algorithm tags. We introduce a unique judging method in which problems are submitted directly to the platform and develop a reliable Elo rating calculation system that aligns with the platform and is comparable with human participants but has lower variance. By testing on our CodeElo, we provide the Elo ratings of 30 existing popular open-source and 3 proprietary LLMs for the first time. The results show that o1-mini and QwQ-32B-Preview stand out significantly, achieving Elo ratings of 1578 and 1261, respectively, while other models struggle even with the easiest problems, placing in the lowest 20 percent among all human participants. Detailed analysis experiments are also conducted to provide insights into performance across algorithms and comparisons between using C++ and Python, which can suggest directions for future studies.

Large language models that enhance software development tasks, such as code generation, code completion, and code question answering (QA), have been extensively studied in both academia and the industry. The models are integrated into popular intelligent IDEs like JetBrains and Cursor. Current benchmarks for evaluating models' code comprehension capabilities primarily focus on code generation or completion, often neglecting QA, which is a crucial aspect of understanding code. Existing code QA benchmarks are derived from code comments with predefined patterns (e.g., CodeQA) or focus on specific domains, such as education (e.g., CS1QA). These benchmarks fail to capture the real-world complexity of software engineering and user requirements for understanding code repositories. To address this gap, we introduce CoReQA, a benchmark for Code Repository-level question answering, constructed from GitHub issues and comments from 176 popular repositories across four programming languages. Since questions and answers may include both natural language and code snippets, traditional evaluation metrics such as BLEU are inadequate for assessing repository-level QA performance. Thus, we provide an LLM-as-a-judge framework to evaluate QA performance from five aspects. Based on CoReQA, we evaluate the performance of three baselines, including two short-context models using generic retrieval strategies and one long-context model that utilizes the entire repository context. Evaluation results show that state-of-the-art proprietary and long-context models struggle to address repository-level questions effectively. Our analysis highlights the limitations of language models in assisting developers in understanding repositories and suggests future directions for improving repository comprehension systems through effective context retrieval methodologies.

Code large language models (codeLLMs) have made significant strides in code generation. Most previous code-related benchmarks, which consist of various programming exercises along with the corresponding test cases, are used as a common measure to evaluate the performance and capabilities of code LLMs. However, the current code LLMs focus on synthesizing the correct code snippet, ignoring the alignment with human preferences, where the query should be sampled from the practical application scenarios and the model-generated responses should satisfy the human preference. To bridge the gap between the model-generated response and human preference, we present a rigorous human-curated benchmark CodeArena to emulate the complexity and diversity of real-world coding tasks, where 397 high-quality samples spanning 40 categories and 44 programming languages, carefully curated from user queries. Further, we propose a diverse synthetic instruction corpus SynCode-Instruct (nearly 20B tokens) by scaling instructions from the website to verify the effectiveness of the large-scale synthetic instruction fine-tuning, where Qwen2.5-SynCoder totally trained on synthetic instruction data can achieve top-tier performance of open-source code LLMs. The results find performance differences between execution-based benchmarks and CodeArena. Our systematic experiments of CodeArena on 40+ LLMs reveal a notable performance gap between open SOTA code LLMs (e.g. Qwen2.5-Coder) and proprietary LLMs (e.g., OpenAI o1), underscoring the importance of the human preference alignment.\url{https://codearenaeval.github.io/ }

Software engineering activities frequently involve edits to existing code. However, contemporary code language models (LMs) lack the ability to handle diverse types of code-edit requirements. In this work, we attempt to overcome this shortcoming through (1) a novel synthetic data generation pipeline and (2) a robust model adaptation algorithm. Starting with seed code examples and diverse editing criteria, our pipeline generates high-quality samples comprising original and modified code, along with natural language instructions in different styles and verbosity. Today's code LMs come bundled with strong abilities, such as code generation and instruction following, which should not be lost due to fine-tuning. To ensure this, we propose a novel adaptation algorithm, SeleKT, that (a) leverages a dense gradient-based step to identify the weights that are most important for code editing, and (b) does a sparse projection onto the base model to avoid overfitting. Using our approach, we obtain a new series of models NextCoder (adapted from QwenCoder-2.5) that achieves strong results on five code-editing benchmarks, outperforming comparable size models and even several larger ones. We show the generality of our approach on two model families (DeepSeekCoder and QwenCoder), compare against other fine-tuning approaches, and demonstrate robustness by showing retention of code generation abilities post adaptation.

Solving NP-hard problems traditionally relies on heuristics, yet manually designing effective heuristics for complex problems remains a significant challenge. While recent advancements like FunSearch have shown that large language models (LLMs) can be integrated into evolutionary algorithms (EAs) for heuristic design, their potential is hindered by limitations in balancing exploitation and exploration. We introduce Quality-Uncertainty Balanced Evolution (QUBE), a novel approach that enhances LLM+EA methods by redefining the priority criterion within the FunSearch framework. QUBE employs the Quality-Uncertainty Trade-off Criterion (QUTC), based on our proposed Uncertainty-Inclusive Quality metric, to evaluate and guide the evolutionary process. Through extensive experiments on challenging NP-complete problems, QUBE demonstrates significant performance improvements over FunSearch and baseline methods. Our code are available at https://github.com/zzjchen/QUBE\_code.

In this report, we introduce the IQuest-Coder-V1 series-(7B/14B/40B/40B-Loop), a new family of code large language models (LLMs). Moving beyond static code representations, we propose the code-flow multi-stage training paradigm, which captures the dynamic evolution of software logic through different phases of the pipeline. Our models are developed through the evolutionary pipeline, starting with the initial pre-training consisting of code facts, repository, and completion data. Following that, we implement a specialized mid-training stage that integrates reasoning and agentic trajectories in 32k-context and repository-scale in 128k-context to forge deep logical foundations. The models are then finalized with post-training of specialized coding capabilities, which is bifurcated into two specialized paths: the thinking path (utilizing reasoning-driven RL) and the instruct path (optimized for general assistance). IQuest-Coder-V1 achieves state-of-the-art performance among competitive models across critical dimensions of code intelligence: agentic software engineering, competitive programming, and complex tool use. To address deployment constraints, the IQuest-Coder-V1-Loop variant introduces a recurrent mechanism designed to optimize the trade-off between model capacity and deployment footprint, offering an architecturally enhanced path for efficacy-efficiency trade-off. We believe the release of the IQuest-Coder-V1 series, including the complete white-box chain of checkpoints from pre-training bases to the final thinking and instruction models, will advance research in autonomous code intelligence and real-world agentic systems.

Large Language Models for code generation frequently produce hallucinations in Fill-in-the-Middle (FIM) tasks -- plausible but incorrect completions such as invented API methods, invalid parameters, undefined variables, or non-existent imports. These failures pass superficial review yet introduce runtime errors. We introduce Delulu, a verified multi-lingual benchmark of 1,951 FIM samples across 7 languages and 4 hallucination types. Samples are curated through an adversarial pipeline: a frontier LLM generates plausible hallucinations, four diverse judge models evaluate them, embedding-based clustering mines progressively harder examples, self-contained Docker containers verify that golden completions compile while hallucinated variants produce the expected runtime error, and a final human-expert review removes any remaining biased or trivially decidable samples. We evaluate 11 open-weight FIM models from five families spanning 0.5B-32B parameters: a six-point Qwen2.5-Coder scaling slate, plus a cross-family slate (CodeLlama, DeepSeek-Coder-V2, StarCoder2). The strongest model reaches only 84.5% pass@1, no family exceeds 0.77 Edit Similarity, and every family produces hallucination-aligned completions on a non-trivial share of samples, confirming that the difficulty exposed by Delulu is task-intrinsic rather than family-specific. We release the benchmark, containers, and evaluation framework at https://github.com/microsoft/delulu.

Code Large Language Models (Code LLMs) have emerged as powerful tools, revolutionizing the software development landscape by automating the coding process and reducing time and effort required to build applications. This paper focuses on training Code LLMs to specialize in the field of quantum computing. We begin by discussing the unique needs of quantum computing programming, which differ significantly from classical programming approaches or languages. A Code LLM specializing in quantum computing requires a foundational understanding of quantum computing and quantum information theory. However, the scarcity of available quantum code examples and the rapidly evolving field, which necessitates continuous dataset updates, present significant challenges. Moreover, we discuss our work on training Code LLMs to produce high-quality quantum code using the Qiskit library. This work includes an examination of the various aspects of the LLMs used for training and the specific training conditions, as well as the results obtained with our current models. To evaluate our models, we have developed a custom benchmark, similar to HumanEval, which includes a set of tests specifically designed for the field of quantum computing programming using Qiskit. Our findings indicate that our model outperforms existing state-of-the-art models in quantum computing tasks. We also provide examples of code suggestions, comparing our model to other relevant code LLMs. Finally, we introduce a discussion on the potential benefits of Code LLMs for quantum computing computational scientists, researchers, and practitioners. We also explore various features and future work that could be relevant in this context.

We study low-precision computation of C=AB with both factors quantized. We derive an exact finite-dimensional identity for the expected squared product error under independent, zero-mean entrywise errors with known variance fields; it holds exactly for non-overloading subtractive dither and for independent stochastic rounding, and we empirically assess deterministic round-to-nearest (RTN). Using the product-preserving equivalence AB=(AT)(T^{-1}B), we formulate contraction-gauge preconditioning: jointly choosing a factor representation and its sharing pattern before quantization. Preconditioning can reduce product error but may require extra transformed, quantized copies of the opposite operand: a shared transform needs one copy, a block-specific transform up to one per block. Within the bounded family of positive diagonal gauges (folds), a geometric program computes a globally optimal shared fold and a linear program decides whether the identity fold is already optimal. For other families we derive computable selection statistics -- tail index for scaling, profile spread for partitioning, coherence and weighted-Gram energy for rotations, slice-energy covariance for hierarchy depth -- with upper bounds for ranking heuristic candidates. Across twelve linear products from a trained three-block image classifier, median within-product rank correlations between dither-model predictions and deterministic-RTN errors are 0.937 at 8 bits and 0.918 at 4 bits. The GP fold cuts held-out product error over the identity fold by 18.0% (8-bit) and 20.5% (4-bit) in geometric mean, beats a SmoothQuant-style grid baseline at both precisions and on ten of twelve products, and lowers composed logit MSE by 15.4% and 26.4%. We thus provide exact stochastic product-error accounting, certified selection within the diagonal family, and a common objective for evaluating reusable transform candidates under RTN.

The dominant industry response to AI-generated code quality problems is to deploy AI reviewers. This paper argues that this response is structurally circular when executable specifications are absent: without an external reference, both the generating agent and the reviewing agent reason from the same artefact, share the same training distribution, and exhibit correlated failures. The review checks code against itself, not against intent. Three hypotheses are developed. First, that correlated errors in homogeneous LLM pipelines echo rather than cancel, a claim supported by convergent empirical evidence from multiple 2025-2026 studies and by three small contrived experiments reported here. The first two experiments are same-family (Claude reviewing Claude-generated code); the third extends to a cross-family panel of four models from three families. All use a planted bug corpus rather than a natural defect sample; they are directional evidence, not a controlled demonstration. Second, that executable specifications perform a domain transition in the Cynefin sense, converting enabling constraints into governing constraints and moving the problem from the complex domain to the complicated domain, a transition that AI makes economically viable at scale. Third, that the defect classes lying outside the reach of executable specifications form a well-defined residual, which is the legitimate and bounded target for AI review. The combined argument implies an architecture: specifications first, deterministic verification pipeline second, AI review only for the structural and architectural residual. This is not a claim that AI review is valueless. It is a claim about what it is actually for, and about what happens when it is deployed without the foundation that makes it non-circular.

Quantitative chemistry is central to modern chemical research, yet the ability of large language models (LLMs) to perform its rigorous, step-by-step calculations remains underexplored. To fill this blank, we propose QCBench, a Quantitative Chemistry oriented benchmark comprising 350 computational chemistry problems across 7 chemistry subfields, which contains analytical chemistry, bio/organic chemistry, general chemistry, inorganic chemistry, physical chemistry, polymer chemistry and quantum chemistry. To systematically evaluate the mathematical reasoning abilities of large language models (LLMs), they are categorized into three tiers: easy, medium, and difficult. Each problem, rooted in realistic chemical scenarios, is structured to prevent heuristic shortcuts and demand explicit numerical reasoning. QCBench enables fine-grained diagnosis of computational weaknesses, reveals model-specific limitations across difficulty levels, and lays the groundwork for future improvements such as domain-adaptive fine-tuning or multi-modal integration. Evaluations on 24 LLMs demonstrate a consistent performance degradation with increasing task complexity, highlighting the current gap between language fluency and scientific computation accuracy. Code for QCBench is available at https://github.com/jiaqingxie/QCBench.

Competition-level code generation tasks pose significant challenges for current state-of-the-art large language models (LLMs). For example, on the LiveCodeBench-Hard dataset, models such as O1-Mini and O1-Preview achieve pass@1 rates of only 0.366 and 0.143, respectively. While tree search techniques have proven effective in domains like mathematics and general coding, their potential in competition-level code generation remains under-explored. In this work, we propose a novel token-level tree search method specifically designed for code generation. Leveraging Qwen2.5-Coder-32B-Instruct, our approach achieves a pass rate of 0.305 on LiveCodeBench-Hard, surpassing the pass@100 performance of GPT4o-0513 (0.245). Furthermore, by integrating Chain-of-Thought (CoT) prompting, we improve our method's performance to 0.351, approaching O1-Mini's pass@1 rate. To ensure reproducibility, we report the average number of generations required per problem by our tree search method on the test set. Our findings underscore the potential of tree search to significantly enhance performance on competition-level code generation tasks. This opens up new possibilities for large-scale synthesis of challenging code problems supervised fine-tuning (SFT) data, advancing competition-level code generation tasks.

A paraphrase-quality audit of MathCheck (ICLR 2025) detected 4 semantically incorrect paraphrases in 129 groups (3.1%); removing them drops GPT-4o from rank 2 to rank 4 and elevates Claude Haiku and DeepSeek V3 above it; these ranking changes are invisible to any single-model evaluation. Cross-model unanimity found these errors automatically (>= 3/4 models for MathCheck; >= 6/9 for our primary evaluation) for under $10; in our own dataset the same protocol found that 47% of auto-generated connective-variation paraphrases were semantically incorrect. That flaw compounds a deeper measurement gap: Claude Haiku 4.5 achieves 86% accuracy yet SCR=50%, meaning half its theorems are answered differently under semantically equivalent restatements, while aggregate accuracy across 9 models spans only 86-96% yet Semantic Consistency Rates (SCR) span 50-82% -- a 32-point gap invisible to standard benchmarks. Formally, for any target ranking over 9 frontier models there exists a weighting over paraphrase families that realizes it (No-Free-Benchmark corollary), because no model Pareto-dominates all families -- so benchmark designers who select families are implicitly choosing which model wins. FormInv supplies the audit protocol (replicated on external benchmarks at 100% recall), SCR and per-theorem Cochran's Q as primary invariance measures evaluated on 9 models across 366-811 items (on Lean4-verified theorems), and FormInvSelector for regime-aware model selection.

Quality Estimation (QE) is essential for assessing machine translation quality in reference-less settings, particularly for domain-specific and low-resource language scenarios. In this paper, we investigate sentence-level QE for English to Indic machine translation across four domains (Healthcare, Legal, Tourism, and General) and five language pairs. We systematically compare zero-shot, few-shot, and guideline-anchored prompting across selected closed-weight and open-weight LLMs. Findings indicate that while closed-weight models achieve strong performance via prompting alone, prompt-only approaches remain fragile for open-weight models, especially in high-risk domains. To address this, we adopt ALOPE, a framework for LLM-based QE that uses Low-Rank Adaptation with regression heads attached to selected intermediate Transformer layers. We also extend ALOPE with recently proposed Low-Rank Multiplicative Adaptation (LoRMA). Our results show that intermediate-layer adaptation consistently improves QE performance, with gains in semantically complex domains, indicating a path toward more robust QE in practical scenarios. We release code and domain-specific QE datasets publicly to support further research.

Code completion has become an essential tool for daily software development. Existing evaluation benchmarks often employ static methods that do not fully capture the dynamic nature of real-world coding environments and face significant challenges, including limited context length, reliance on superficial evaluation metrics, and potential overfitting to training datasets. In this work, we introduce a novel framework for enhancing code completion in software development through the creation of a repository-level benchmark ExecRepoBench and the instruction corpora Repo-Instruct, aim at improving the functionality of open-source large language models (LLMs) in real-world coding scenarios that involve complex interdependencies across multiple files. ExecRepoBench includes 1.2K samples from active Python repositories. Plus, we present a multi-level grammar-based completion methodology conditioned on the abstract syntax tree to mask code fragments at various logical units (e.g. statements, expressions, and functions). Then, we fine-tune the open-source LLM with 7B parameters on Repo-Instruct to produce a strong code completion baseline model Qwen2.5-Coder-Instruct-C based on the open-source model. Qwen2.5-Coder-Instruct-C is rigorously evaluated against existing benchmarks, including MultiPL-E and ExecRepoBench, which consistently outperforms prior baselines across all programming languages. The deployment of can be used as a high-performance, local service for programming development\url{https://execrepobench.github.io/}.

We present OPENHARMONY BENCH, an app-level coding benchmark for evaluating LLM-based coding agents on OpenHarmony ArkTS applications. Unlike function-level benchmarks, it evaluates complete app-level changes: each task requires an agent to modify a buildable ArkTS project so that a requested behavior works end to end, involving UI state, data persistence, build configuration, and platform APIs. The benchmark installs and drives the delivered application on a device to check whether the behavior is observable. It covers three input sources: natural-language feature requests (new-feature), structured scenario specifications (spec-driven), and bug descriptions (bug-fix). The benchmark contains 153 top-level tasks and 242 Feature points (F-points), where an F-point is one executable behavior check. The snapshot includes 32 new-feature tasks, 50 spec-driven tasks with 139 F-points, and 71 bug-fix tasks. The main leaderboard is scored over top-level tasks rather than independently weighted F-points. We describe the benchmark construction, statistics, and build-and-test evaluation pipeline, and evaluate DevEco Code with eight LLMs across three independent full-suite runs per configuration. Three findings emerge. First, newer generations complete more tasks than their predecessors within evaluated model-family pairs. Second, buildability is close to saturated while behavioral correctness is not: mean Final Build Success Rate is 94.77% to 100.00%, whereas mean Task Completion is 48.36% to 58.39%. Third, spec-driven tasks have the lowest Task Completion under all-checks task scoring, with no configuration exceeding 35%. The code, data, tasks, reference solutions, tests, evaluation scripts, and leaderboard are released through the official OPENHARMONY BENCH website at https://bench.matrix.openharmony.cn/.

Code generation is a core capability of large language models (LLMs), yet mainstream benchmarks (e.g., APPs and LiveCodeBench) contain questions with medium-level difficulty and pose no challenge to advanced LLMs. To better reflected the advanced reasoning and code generation ability, We introduce Humanity's Last Code Exam (HLCE), comprising 235 most challenging problems from the International Collegiate Programming Contest (ICPC World Finals) and the International Olympiad in Informatics (IOI) spanning 2010 - 2024. As part of HLCE, we design a harmonized online-offline sandbox that guarantees fully reproducible evaluation. Through our comprehensive evaluation, we observe that even the strongest reasoning LLMs: o4-mini(high) and Gemini-2.5 Pro, achieve pass@1 rates of only 15.9% and 11.4%, respectively. Meanwhile, we propose a novel "self-recognition" task to measure LLMs' awareness of their own capabilities. Results indicate that LLMs' self-recognition abilities are not proportionally correlated with their code generation performance. Finally, our empirical validation of test-time scaling laws reveals that current advanced LLMs have substantial room for improvement on complex programming tasks. We expect HLCE to become a milestone challenge for code generation and to catalyze advances in high-performance reasoning and human-AI collaborative programming. Our code and dataset are also public available(https://github.com/Humanity-s-Last-Code-Exam/HLCE).

Indic quality estimation (QE) and automatic post-editing (APE) data is spread across separate releases, so no single resource supports training and evaluation across tasks and language pairs on one footing. We consolidate the WMT 2020--2024 shared-task lineage with an extended English--Malayalam resource into \indicqe: 126{,}754 instances over nine directional pairs, with up to four label types aligned on the same segment, a direct assessment, a human post-edit, word-level OK/BAD tags and an error explanation, and a test set stratified over four difficulty axes. On it, we benchmark six prompted LLMs and three COMET metrics on segment-level QE, and three systems on APE. Two of the axes are defined partly on the direct assessment and select a compressed slice of it, so each axis is compared against a control drawn from the same language pair with the same score distribution. Only one survives that control: segments whose holistic and token-level quality signals conflict are ranked worse than equally-scored segments of the same language, for all nine systems and all seven pairs that carry the axis. Annotator disagreement, which looks second-hardest without the control, has no effect with it. Few-shot prompting costs every model leq 3.4B both correlation and output-format compliance. Within-language accuracy does not make scores comparable across pairs: of the three trained metrics, the one with the best within-language correlation loses most when the pairs are pooled. The benchmark and code will be released.

Low-bit post-training quantization (PTQ) is a practical route to deploy reasoning-capable LLMs under tight memory and latency budgets, yet it can markedly impair mathematical reasoning (drops up to 69.81% in our harder settings). We address two deployment-critical questions with process-level precision: Where along a step-structured solution does degradation first arise? How to mitigate it while staying in the low-bit regime? Across widely used PTQ methods (AWQ, GPTQ, SmoothQuant), open-source model families (Qwen, LLaMA; 0.5--7B), and math reasoning benchmarks (GSM8K, MATH, AIME), we perform format-aligned chain-of-thought with step-aligned attribution and uncover two robust regularities: (i) PTQ disproportionately elevates method and execution errors relative to high-level conceptual mistakes; and (ii) failures emerge early, with the first vulnerable step flipping and cascading to the final answer. These regularities suggest a general intervention principle: restore local token-level margins exactly at the earliest failure frontier. We instantiate this principle as a lightweight measurerightarrowlocaterightarrowrestore loop that operates directly on the quantized model: detect the first faulty step, construct our "Silver Bullet" datasets, and apply small-scale supervised/preference tuning. In our settings, as few as 332 curated examples and 3--5 minutes of compute on a single GPU recover 4-bit weight math reasoning toward the full-precision baseline while preserving PTQ efficiency. Our framework is quantizer- and architecture-agnostic within the evaluated regimes, and turns low-bit degradation from a global accuracy problem into a local, reproducible process intervention.

Fault-tolerant quantum computing will require error rates far below those achievable with physical qubits. Quantum error correction (QEC) bridges this gap, but depends on decoders being simultaneously fast, accurate, and scalable. This combination of requirements remains unmet by a machine-learning decoder, nor by any decoder for promising resource-efficient codes such as the color code. Here we introduce AlphaQubit 2, a neural-network decoder that achieves near-optimal logical error rates for both surface and color codes at scale under realistic noise. For the color code, it is orders of magnitude faster than other high-accuracy decoders. We demonstrate real-time decoding faster than 1μs per cycle on commercial accelerators: for the surface code to distance 11, with better accuracy than leading real-time decoders; and the first real-time decoding of the color code to distance 9. These results support the practical application of a wider class of promising QEC codes, and establish a credible path towards high-accuracy, real-time neural decoding at the scales required for fault-tolerant quantum computation.

We release Code Llama, a family of large language models for code based on Llama 2 providing state-of-the-art performance among open models, infilling capabilities, support for large input contexts, and zero-shot instruction following ability for programming tasks. We provide multiple flavors to cover a wide range of applications: foundation models (Code Llama), Python specializations (Code Llama - Python), and instruction-following models (Code Llama - Instruct) with 7B, 13B and 34B parameters each. All models are trained on sequences of 16k tokens and show improvements on inputs with up to 100k tokens. 7B and 13B Code Llama and Code Llama - Instruct variants support infilling based on surrounding content. Code Llama reaches state-of-the-art performance among open models on several code benchmarks, with scores of up to 53% and 55% on HumanEval and MBPP, respectively. Notably, Code Llama - Python 7B outperforms Llama 2 70B on HumanEval and MBPP, and all our models outperform every other publicly available model on MultiPL-E. We release Code Llama under a permissive license that allows for both research and commercial use.

Advancing code reasoning in large language models (LLMs) is fundamentally limited by the scarcity of high-difficulty datasets, especially those with verifiable input-output test cases necessary for rigorous solution validation at scale. We introduce rStar-Coder, which significantly improves LLM code reasoning capabilities by constructing a large-scale, verified dataset of 418K competition-level code problems, 580K long-reasoning solutions along with rich test cases of varying difficulty. This is achieved through three core contributions: (1) we curate competitive programming code problems and oracle solutions to synthesize new, solvable problems; (2) we introduce a reliable input-output test case synthesis pipeline that decouples the generation into a three-step input generation method and a mutual verification mechanism for effective output labeling; (3) we augment problems with high-quality, test-case-verified long-reasoning solutions. Extensive experiments on Qwen models (1.5B-14B) across various code reasoning benchmarks demonstrate the superiority of rStar-Coder dataset, achieving leading performance comparable to frontier reasoning LLMs with much smaller model sizes. On LiveCodeBench, rStar-Coder improves Qwen2.5-7B from 17.4% to an impressive 57.3%, and Qwen2.5-14B from 23.3% to 62.5%, surpassing o3-mini (low) by3.1%. On the more challenging USA Computing Olympiad, our 7B model achieves an average pass@1 accuracy of 16.15%, outperforming the frontier-level QWQ-32B. Code and the dataset will be released at https://github.com/microsoft/rStar.

LLMs have long demonstrated remarkable effectiveness in automatic program repair (APR), with OpenAI's ChatGPT being one of the most widely used models in this domain. Through continuous iterations and upgrades of GPT-family models, their performance in fixing bugs has already reached state-of-the-art levels. However, there are few works comparing the effectiveness and variations of different versions of GPT-family models on APR. In this work, inspired by the recent public release of the GPT-o1 models, we conduct the first study to compare the effectiveness of different versions of the GPT-family models in APR. We evaluate the performance of the latest version of the GPT-family models (i.e., O1-preview and O1-mini), GPT-4o, and the historical version of ChatGPT on APR. We conduct an empirical study of the four GPT-family models against other LLMs and APR techniques on the QuixBugs benchmark from multiple evaluation perspectives, including repair success rate, repair cost, response length, and behavior patterns. The results demonstrate that O1's repair capability exceeds that of prior GPT-family models, successfully fixing all 40 bugs in the benchmark. Our work can serve as a foundation for further in-depth exploration of the applications of GPT-family models in APR.

SciCode is the standard measure of the scientific-coding ability of language models: research-level problems that demand both frontier scientific theory and its implementation as working numerical code. It is a component of the Artificial Analysis Intelligence Index and a standing evaluation in government and national-laboratory suites. Yet its scores have recently plateaued: the strongest 2026 models cluster tightly around 60\% subproblem accuracy, and a successor model ties its predecessor. We trace this stagnation to defects in the benchmark itself. A per-problem, domain-expert audit of all 65 test problems uncovers 263 defects; 192 of them, spread across 91\% of the main problems, cause correct, instruction-following solutions to be wrongly rejected---through non-reproducible gold answers, over-tight tolerances, or self-contradictory specifications. Critically, 78\% of these score-suppressing defects require specialized physics or mathematics knowledge to detect, not mere clerical proofreading. We corrected every confirmable defect to produce SciCode-Verified. The corrections add only the specifications a well-posed problem requires, repair grading, and tighten the tests that were too lenient; every change is recorded with its justification and independently re-checked by a second domain expert. We re-evaluate twelve frontier model snapshots on the corrected benchmark and find a substantial recovery: subproblem accuracy rises from 45--60\% to 84--98\%, and main-problem accuracy from 9--27\% to 69--92\%. State-of-the-art models are far more proficient in scientific coding than SciCode has suggested---the bottleneck was not model capability, but the quality of the evaluation instrument. We release SciCode-Verified with its complete audit trail as the corrected public standard.

Embodied coding agents can combine modular robot skills with frozen end-to-end policies, yet effective composition requires anticipating which policy family will succeed in the current physical state. We present RoboAware, which builds on coding agents' skill orchestration by learning only a state-conditioned responsibility coordinator from counterfactual outcomes. Inspired by the success of REPL, we propose the P^5 schema and formulate a hierarchical MDP based on it. P^5 organizes skills uniformly into five semantic stages, defining where responsibility can be compared. To address the lack of counterfactual branch outcomes in existing work, we introduce State-Locked Counterfactual Branching (SCB), which restores the same training state to generate and execute a code block from each admissible family, exposing outcomes that selected-branch experience leaves unobserved. Building on this, we propose Execution-Aware Learning (EAL), which combines Monte Carlo tree search with Q-learning to distill these outcomes into family-conditioned values. At deployment, the coordinator selects the policy family according to observable context, and the frozen coding agent generates the next local code block. Comprehensive single-episode evaluations on 100 tasks show that RoboAware reaches a 77.0% overall success rate, with SOTA averages of 90.0% on RoboSuite, 73.8% on diverse LIBERO-Pro task clusters, and 90.0% on challenging RoboTwin bimanual tasks, outperforming existing code-as-policy and VLA-harness baselines.

In this report, we introduce the Qwen2.5-Coder series, a significant upgrade from its predecessor, CodeQwen1.5. This series includes two models: Qwen2.5-Coder-1.5B and Qwen2.5-Coder-7B. As a code-specific model, Qwen2.5-Coder is built upon the Qwen2.5 architecture and continues pretrained on a vast corpus of over 5.5 trillion tokens. Through meticulous data cleaning, scalable synthetic data generation, and balanced data mixing, Qwen2.5-Coder demonstrates impressive code generation capabilities while retaining general versatility. The model has been evaluated on a wide range of code-related tasks, achieving state-of-the-art (SOTA) performance across more than 10 benchmarks, including code generation, completion, reasoning, and repair, consistently outperforming larger models of the same model size. We believe that the release of the Qwen2.5-Coder series will not only push the boundaries of research in code intelligence but also, through its permissive licensing, encourage broader adoption by developers in real-world applications.

Code generation models have increasingly become integral to aiding software development, offering assistance in tasks such as code completion, debugging, and code translation. Although current research has thoroughly examined the correctness of code produced by code generation models, a vital aspect, i.e., the efficiency of the generated code, has often been neglected. This paper presents EffiBench, a benchmark with 1,000 efficiency-critical coding problems for assessing the efficiency of code generated by code generation models. EffiBench contains a diverse set of LeetCode coding problems. Each problem is paired with an executable human-written canonical solution. With EffiBench, we empirically examine the capability of 21 Large Language Models (13 open-sourced and 8 closed-sourced) in generating efficient code. The results demonstrate that GPT-4-turbo generates the most efficient code, significantly outperforming Palm-2-chat-bison, Claude-instant-1, Gemini-pro, GPT-4, and GPT-3.5. Nevertheless, its code efficiency is still worse than the efficiency of human-written canonical solutions. In particular, the average and worst execution time of GPT-4-turbo generated code is 1.69 and 45.49 times that of the canonical solutions.

Current coding-agent benchmarks usually pro- vide the full task specification upfront. Real research coding often does not: the intended system is progressively disclosed through in- teraction, requiring the agent to track durable design commitments across a long session. We introduce a benchmark for this setting and study faithfulne Ss Loss U nder eM ergent s Pecification (SLUMP), defined as the reduc- tion in final implementation faithfulness un- der emergent specification relative to a single- shot specification control. The benchmark con- tains 20 recent ML papers (10 ICML 2025, 10 NeurIPS 2025), 371 atomic verifiable compo- nents, and interaction scripts of approximately 60 coding requests that progressively disclose the target design without revealing the paper itself. Final repositories are scored with a five-level component-faithfulness rubric and accompanied by an exposure audit to verify that scored components are recoverable from the visible interaction. Evaluated on Claude Code and Codex, the single-shot specification control achieves higher overall implementation fidelity on 16/20 and 14/20 papers, respectively. Structural integration degrades under emergent specification on both platforms, while seman- tic faithfulness loss is substantial on Claude Code and small on Codex. As a mitigation case study, we introduce ProjectGuard, an exter- nal project-state layer for specification tracking. On Claude Code, ProjectGuard recovers 90% of the faithfulness gap, increases fully faith- ful components from 118 to 181, and reduces severe failures from 72 to 49. These results identify specification tracking as a distinct eval- uation target for long-horizon coding agents.

Weight quantization for large-language-model inference must balance adaptive reconstruction levels with representations regular enough for efficient GPU execution. Uniform integers constrain each group to a linear grid. Low-bit floating-point formats use a fixed exponent-mantissa structure, while learned codebooks gain flexibility at the cost of irregular decoding and additional metadata. We introduce CubicQuant, a parametric non-uniform scalar format that preserves a dense integer code stream while adapting reconstruction levels within each weight group. A monotonic cubic curve, specified by two shape parameters and one scale, maps uniformly spaced magnitude codes to non-uniform levels. The family spans 1-8-bit weight payloads, contains symmetric uniform integer quantization as an exact special case, and has effective width B + 64/G bits per weight for payload width B and group size G. We derive population distortion under Uniform, Gaussian, and Laplace distributions, formulate continuous and Dynamic-A8-carrier-aware fitting objectives, and describe direct packed-weight GPU execution. For finite groups of G=128 with 15,360 samples per distribution, W4 CubicQuant reduced reconstruction RMSE relative to optimally clipped four-bit uniform integer quantization by 3.90% on Uniform, 13.49% on Gaussian, and 28.14% on Laplace samples. Relative to the best enumerated four-bit finite floating-point format, the reductions were 3.90%, 9.44%, and 6.27%. Preliminary H200 kernel measurements show a workload-dependent crossover: model-dtype execution is faster for narrow GEMV, while Dynamic A8 becomes favorable as row count grows. The results establish the format's representational promise and direct executability; downstream model quality and cross-device end-to-end performance remain open evaluation questions.

Code completion has become a central task, gaining significant attention with the rise of large language model (LLM)-based tools in software engineering. Although recent advances have greatly improved LLMs' code completion abilities, evaluation methods have not advanced equally. Most current benchmarks focus solely on functional correctness of code completions based on given context, overlooking models' ability to follow user instructions during completion-a common scenario in LLM-assisted programming. To address this limitation, we present the first instruction-guided code completion benchmark, Controllable Code Completion Benchmark (C3-Bench), comprising 2,195 carefully designed completion tasks. Through comprehensive evaluation of over 40 mainstream LLMs across C3-Bench and conventional benchmarks, we reveal substantial gaps in instruction-following capabilities between open-source and advanced proprietary models during code completion tasks. Moreover, we develop a straightforward data synthesis pipeline that leverages Qwen2.5-Coder to generate high-quality instruction-completion pairs for supervised fine-tuning (SFT). The resulting model, Qwen2.5-Coder-C3, achieves state-of-the-art performance on C3-Bench. Our findings provide valuable insights for enhancing LLMs' code completion and instruction-following capabilities, establishing new directions for future research in code LLMs. To facilitate reproducibility and foster further research in code LLMs, we open-source all code, datasets, and models.

We introduce Stable Code, the first in our new-generation of code language models series, which serves as a general-purpose base code language model targeting code completion, reasoning, math, and other software engineering-based tasks. Additionally, we introduce an instruction variant named Stable Code Instruct that allows conversing with the model in a natural chat interface for performing question-answering and instruction-based tasks. In this technical report, we detail the data and training procedure leading to both models. Their weights are available via Hugging Face for anyone to download and use at https://huggingface.co/stabilityai/stable-code-3b and https://huggingface.co/stabilityai/stable-code-instruct-3b. This report contains thorough evaluations of the models, including multilingual programming benchmarks, and the MT benchmark focusing on multi-turn dialogues. At the time of its release, Stable Code is the state-of-the-art open model under 3B parameters and even performs comparably to larger models of sizes 7 billion and 15 billion parameters on the popular Multi-PL benchmark. Stable Code Instruct also exhibits state-of-the-art performance on the MT-Bench coding tasks and on Multi-PL completion compared to other instruction tuned models. Given its appealing small size, we also provide throughput measurements on a number of edge devices. In addition, we open source several quantized checkpoints and provide their performance metrics compared to the original model.

Existing code reasoning methods primarily supervise final code outputs, ignoring intermediate states, often leading to reward hacking where correct answers are obtained through inconsistent reasoning. We propose StepCodeReasoner, a framework that introduces explicit intermediate execution-state supervision. By automatically inserting structured print-based execution-trace anchors into code, the model is trained to predict runtime states at each step, transforming code reasoning into a verifiable, stepwise execution modeling problem. Building on this execution-aware method, we introduce Bi-Level GRPO, a reinforcement learning algorithm for structured credit assignment at two levels: inter-trajectory, comparing alternative execution paths, and intra-trajectory, rewarding intermediate accuracy based on its impact on downstream correctness. Extensive experiments demonstrate that StepCodeReasoner achieves SOTA performance in code reasoning. In particular, our 7B model achieves 91.1\% on CRUXEval and 86.5\% on LiveCodeBench, outperforming the CodeReasoner-7B baseline (86.0\% and 77.7\%) and GPT-4o (85.6\% and 75.1\%). Furthermore, on the execution-trace benchmark REval, our model scores 82.9\%, outperforming baseline CodeReasoner-7B (72.3\%), its 14B counterpart (81.1\%), and GPT-4o (77.3\%). Additionally, our approach also improves code generation performance, demonstrating that explicit execution modeling enhances both code reasoning and code generation.