new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

RestoreKV: Recovering Full-Cache Behavior Under Aggressive Query-Agnostic KV Cache Eviction

Query-agnostic KV cache eviction compresses a context once and reuses the resulting cache for arbitrary future queries, but performance can collapse under tight budgets. Existing methods primarily improve which original KV pairs are retained. We introduce RestoreKV, which complements this selection-based formulation with learned restoration under the same total KV budget. Our key insight is that, although the information lost through eviction is context-specific, the mechanism for generating its compact complement can be shared across contexts. After context prefill, a few restore tokens attend to the full KV cache in a single LoRA-adapted pass, generating a compact, context-conditioned restore cache. The base importance scorer and eviction rule remain unchanged, and the adapters are disabled for all subsequent queries and decoding. RestoreKV is trained through parameter-efficient self-distillation from the frozen full-cache model, optimizing only 0.4% of the parameters and requiring no task-specific tuning. Across four backbones and four long-context benchmarks, RestoreKV substantially reduces compression-induced degradation. On Qwen3-4B, it improves 59 of 60 paired, budget-matched settings across five base eviction methods; at a 5% budget, it raises KVzip from 38.2 to 73.2 on RULER-4K. Applied to KVzip+, RestoreKV reaches 86.4 RULER accuracy at 16times compression on the KVPress Benchmark, while adding less than 0.5% one-time cache-construction overhead in a 32K-context evaluation. Our project page is available at https://paper.pnu-cvsp.com/RestoreKV/

  • 3 authors
·
Aug 1 2

Stratified Sparse Attention: Reducing the Sparse-to-Dense Gap at Extreme Sparsity

Large Language Model inference over long contexts is increasingly bottlenecked by the cost of attending to a growing Key-Value (KV) cache. Sparse attention reduces this cost by accessing only a fraction of the cache, but existing methods face a trade-off between deterministic retrieval, which captures high-scoring tokens but discards residual attention mass, and sampling, which improves coverage at the cost of higher variance. Hybrid methods combine top-k retrieval with uniform sampling, yet still exhibit a substantial gap from dense attention at aggressive sparsity. We introduce Stratified Sparse Attention (SSA), a unified framework combining deterministic retrieval with score-guided sampling. SSA deterministically attends to high-scoring tokens while sampling the residual using proxy attention scores and correcting for their inclusion probabilities, thereby recovering attention mass beyond the retrieval set. SSA encompasses top-k, top-p, and hybrid top-k+sampling as special cases. Across RULER, LongBench, LOFT, and AIME, and five models ranging from 3B to 27B parameters, SSA consistently improves over the baselines at matched sparsity. On RULER-HARD with Ministral-3-8B, SSA improves accuracy over the strongest practical baseline from 81.8\% to 84.2\% at 32K and from 63.8\% to 69.3\% at 128K under 50times attention sparsity, recovering 94\% and 85\% of dense-attention performance, respectively. With optimized CUDA kernels, SSA achieves up to 2.96times decode speedup over FlashInfer at 1M context, demonstrating that its accuracy gains translate into practical long-context inference acceleration. We open-source our code at https://github.com/skylight-org/SSA-Paper-Code.

Skylight1 Skylight
·
Oct 19 2

Can Language Models Learn While They Think? Testing Gradient Adaptation Across Architectures

Letting a language model take gradient steps on the text it is reading, known as dynamic evaluation, lowers its loss on the rest of the document. Its behaviour on hybrid linear-attention architectures, on diffusion language models, and on standard long-context benchmarks has not been measured. We measure it. With one SGD step per 128-token chunk on the MLP output projections of the last quarter of blocks, no training, and a 2k-token window, softmax-attention models (Qwen3-1.7B, Qwen3-4B, Gemma-4-E4B) lose 5-8% of their next-token loss over a document and outperform the same frozen model given the full 32k-token context. Hybrid Gated-DeltaNet models (Qwen3.5-4B, Qwen3.8-27B) gain under 1% at every learning rate: the linear-attention blocks already perform the adaptation. The mechanism transfers to masked-diffusion models with a larger effect, 8% on Nemotron-Diffusion-8B and 17-20% on DiffusionGemma-26B, once the rate is lowered and updates are clipped. Across RULER, BABILong, LongBench-v2, SCOTUS, HotpotQA, MuSiQue, ContractNLI and citation completion, at 100 or more items on two model sizes, weights updated on the full document recover none of the accuracy lost to context truncation: the adaptation is style and vocabulary, not retrieval. Writing facts with the next-token loss stores the prompt format rather than the fact (30% recall under chat prompting against 80% in context) and costs 36-38 GSM8K points at every dose. Writing a conclusion as behaviour instead, by distilling the model's own conclusion-conditioned judgments into a low-rank adapter, reaches the in-context ceiling (0.83 and 0.88 against 0.84 and 0.88 on 100 games) with GSM8K unchanged, and the conclusion can come from an inquiry loop that found it by asking information-gain questions.

  • 1 authors
·
Oct 9

Multi-layer Indexer: Overlapping Selection and Attention in DeepSeek Sparse Attention

Sparse attention cuts the cost of long-context inference by making the attention matrix sparse: each query attends only a subset of the sequence, chosen by a fixed pattern or, in recent production LLMs, learned per query. In DeepSeek Sparse Attention (DSA), the attention of DeepSeek-V3.2 and the GLM-5 family, every layer is preceded by a lightning indexer that scores the whole cache and keeps the k=2048 highest-scoring tokens for the layer to attend. At long context this indexer scan, not the sparse attention it feeds, is where the decode time goes. But adjacent layers select nearly the same tokens, so a layer can attend the selection of the previous indexer layer instead of its own. This removes the dependency: each indexer then runs concurrently with the attention of its layer. The resulting Multi-layer Indexer (MLI) needs no retraining and no new weights. Its default realization changes no kernel, running inside SGLang's production decode graph; an optional fused decode kernel accelerates it further on DeepSeek-V3.2. MLI composes with IndexCache (the cross-layer reuse GLM-5.2 ships as IndexShare): IndexCache drops the indexer from some layers, and MLI hides the scan on the rest. We serve DeepSeek-V3.2 and GLM-5 under IndexCache's protocol at retentions 1/2 to 1/32 (the fraction of layers that keep an indexer) and contexts 10K to 195K. At equal retention the composition decodes faster than IndexCache: up to 14.5% faster on DeepSeek-V3.2 and 9.8% on GLM-5 at 1/2, and 7.9% and 5.1% at 1/4, largest where IndexCache keeps the most indexers and growing with context. At retention 1/r it is faster still than IndexCache at 1/(2r) while keeping twice the fresh selections: at 128K it reaches 1.32x the unmodified model's decode throughput at 1/4, above IndexCache's 1.28x at 1/8. Its LongBench, RULER and LongBench v2 accuracy stays within a few percentage points of IndexCache's.

Writer Writer
·
Nov 1 3

xKV: Cross-Layer SVD for KV-Cache Compression

Large Language Models (LLMs) with long context windows enable powerful applications but come at the cost of high memory consumption to store the Key and Value states (KV-Cache). Recent studies attempted to merge KV-cache from multiple layers into shared representations, yet these approaches either require expensive pretraining or rely on assumptions of high per-token cosine similarity across layers which generally does not hold in practice. We find that the dominant singular vectors are remarkably well-aligned across multiple layers of the KV-Cache. Exploiting this insight, we propose xKV, a simple post-training method that applies Singular Value Decomposition (SVD) on the KV-Cache of grouped layers. xKV consolidates the KV-Cache of multiple layers into a shared low-rank subspace, significantly reducing KV-Cache sizes. Through extensive evaluations on the RULER long-context benchmark with widely-used LLMs (e.g., Llama-3.1 and Qwen2.5), xKV achieves up to 6.8x higher compression rates than state-of-the-art inter-layer technique while improving accuracy by 2.7%. Moreover, xKV is compatible with the emerging Multi-Head Latent Attention (MLA) (e.g., DeepSeek-Coder-V2), yielding a notable 3x compression rates on coding tasks without performance degradation. These results highlight xKV's strong capability and versatility in addressing memory bottlenecks for long-context LLM inference. Our code is publicly available at: https://github.com/abdelfattah-lab/xKV.

  • 7 authors
·
Mar 24, 2025 1

FocuSFT: Bilevel Optimization for Dilution-Aware Long-Context Fine-Tuning

Large language models can now process increasingly long inputs, yet their ability to effectively use information spread across long contexts remains limited. We trace this gap to how attention budget is spent during supervised fine-tuning (SFT) on long sequences: positional biases and attention sinks cause the model to allocate most of its attention to positionally privileged tokens rather than semantically relevant content. This training-time attention dilution (the starvation of content tokens in the attention distribution) weakens the gradient signal, limiting the model's ability to learn robust long-context capabilities. We introduce FocuSFT, a bilevel optimization framework that addresses this problem at training time. An inner loop adapts lightweight fast-weight parameters on the training context to form a parametric memory that concentrates attention on relevant content, and the outer loop performs SFT conditioned on this sharpened representation. Both loops apply bidirectional attention over context tokens while preserving causal masking for responses, reducing the causal asymmetry that gives rise to attention sinks and aligning inner-outer behavior. On BABILong, FocuSFT improves accuracy by up to +14pp across 4K--32K context lengths; on RULER, it raises CWE aggregation from 72.9\% to 81.1\% at 16K; and on GPQA with agentic tool use, it yields a 24\% relative gain in pass@1. Attention analysis shows that FocuSFT reduces attention sink mass by 529times and triples context engagement during training. Code: https://github.com/JarvisPei/FocuSFT

  • 6 authors
·
May 10 1

CompactAttention: Accelerating Chunked Prefill with Block-Union KV Selection

Chunked prefill has become a widely adopted serving strategy for long-context large language models, but efficient attention computation in this regime remains challenging. Existing sparse attention methods are primarily designed for one-shot prefill and do not translate efficiently to chunked prefill: block-sparse kernels lose efficiency when the query length is limited by the chunk size, while fine-grained pattern search becomes costly when repeated over the accumulated KV cache at every chunk. QUOKA, a recent method that directly targets chunked prefill, avoids sparse-kernel overhead but relies on query-subsampled, token-level KV selection, which can miss query-specific KV entries and introduce explicit KV-copy overhead. To address these limitations, we propose CompactAttention, a chunked-prefill attention mechanism based on Block-Union KV Selection. CompactAttention treats 2D block-sparse masks as KV-selection signals rather than direct sparse-kernel execution plans, and converts them into GQA-aware per-group KV block tables through Q-block union and intra-group union. This construction produces the minimal block tables that preserve all KV blocks selected by the input masks under paged execution constraints, enabling selected KV blocks to be accessed in place without explicit KV compaction. On LLaMA-3.1-8B-Instruct, CompactAttention maintains accuracy close to dense attention on the RULER benchmark while delivering up to 2.72times attention speedup at 128K context length under chunked prefill.

ShadowKV: KV Cache in Shadows for High-Throughput Long-Context LLM Inference

With the widespread deployment of long-context large language models (LLMs), there has been a growing demand for efficient support of high-throughput inference. However, as the key-value (KV) cache expands with the sequence length, the increasing memory footprint and the need to access it for each token generation both result in low throughput when serving long-context LLMs. While various dynamic sparse attention methods have been proposed to speed up inference while maintaining generation quality, they either fail to sufficiently reduce GPU memory consumption or introduce significant decoding latency by offloading the KV cache to the CPU. We present ShadowKV, a high-throughput long-context LLM inference system that stores the low-rank key cache and offloads the value cache to reduce the memory footprint for larger batch sizes and longer sequences. To minimize decoding latency, ShadowKV employs an accurate KV selection strategy that reconstructs minimal sparse KV pairs on-the-fly. By evaluating ShadowKV on a broad range of benchmarks, including RULER, LongBench, and Needle In A Haystack, and models like Llama-3.1-8B, Llama-3-8B-1M, GLM-4-9B-1M, Yi-9B-200K, Phi-3-Mini-128K, and Qwen2-7B-128K, we demonstrate that it can support up to 6times larger batch sizes and boost throughput by up to 3.04times on an A100 GPU without sacrificing accuracy, even surpassing the performance achievable with infinite batch size under the assumption of infinite GPU memory. The code is available at https://github.com/bytedance/ShadowKV.

ByteDance-Seed ByteDance Seed
·
Oct 28, 2024 2

ProphetKV: User-Query-Driven Selective Recomputation for Efficient KV Cache Reuse in Retrieval-Augmented Generation

The prefill stage of long-context Retrieval-Augmented Generation (RAG) is severely bottlenecked by computational overhead. To mitigate this, recent methods assemble pre-calculated KV caches of retrieved RAG documents (by a user query) and reprocess selected tokens to recover cross-attention between these pre-calculated KV caches. However, we identify a fundamental "crowding-out effect" in current token selection criteria: globally salient but user-query-irrelevant tokens saturate the limited recomputation budget, displacing the tokens truly essential for answering the user query and degrading inference accuracy. We propose ProphetKV, a user-query-driven KV Cache reuse method for RAG scenarios. ProphetKV dynamically prioritizes tokens based on their semantic relevance to the user query and employs a dual-stage recomputation pipeline to fuse layer-wise attention metrics into a high-utility set. By ensuring the recomputation budget is dedicated to bridging the informational gap between retrieved context and the user query, ProphetKV achieves high-fidelity attention recovery with minimal overhead. Our extensive evaluation results show that ProphetKV retains 96%-101% of full-prefill accuracy with only a 20% recomputation ratio, while achieving accuracy improvements of 8.8%-24.9% on RULER and 18.6%-50.9% on LongBench over the state-of-the-art approaches (e.g., CacheBlend, EPIC, and KVShare).

  • 10 authors
·
Feb 4

Jet-Long: Efficient Long-Context Extension with Dynamic Bifocal RoPE

Modern LLMs are increasingly deployed in long-context applications such as retrieval-augmented generation, repository-level coding, and agentic workflows whose accumulated reasoning and tool traces routinely push the input an order of magnitude past the pretraining window, making zero-shot context extension the dominant deployment path for open-weight checkpoints. Most existing zero-shot methods fix a single rescaling factor up front, so an aggressive factor sacrifices short-context fidelity while a conservative one breaks down at long contexts. We propose Jet-Long, a tuning-free zero-shot method that pairs a local RoPE-faithful window with a long-range window whose rescaling factor adapts dynamically to the current sequence length, recovering the base model exactly at short inputs while extrapolating cleanly at long ones. An inclusion-exclusion attention merge and an on-the-fly RoPE correction rotation make the bifocal construction essentially free at inference; fused into a single CuTe kernel, long-context prefill reaches up to 1.39times FA2 throughput on H100 (approaching the Hopper-only FA4), and single-batch generation incurs le 4% overhead at every length. On Qwen3-1.7B/4B/8B up to 128K context, Jet-Long leads RULER by +4.79/+2.18/+2.03~pp over the strongest baseline at 1.7B/4B/8B, achieves the best overall accuracy on HELMET-RAG (a benchmark identified by HELMET as the most efficient predictor of downstream long-context performance) and attains the lowest PG-19 perplexity. Jet-Long also generalizes to hybrid attention architectures such as Jet-Nemotron for further long-context improvement without retraining, and remains hyperparameter-resilient for ease of deployment.

nvidia NVIDIA
·
Jul 7 2

CARVE: Content-Aware Recurrent with Value Efficiency for Chunk-Parallel Linear Attention

Recurrent delta-rule models keep a fixed-size state matrix S (d_v x d_k) that compresses all past context. The state of the art (GDN-2) gates this update with element-wise matrix erase/write masks. This is powerful but has two defects. First, both gates are computed from the incoming token alone, making the model memory-blind: it decides what to erase without seeing what it has stored. Second, value-axis coupling in the erase gate blocks the WY-form triangular chunk solver that drives efficient training -- the intra-chunk system splits into d_v independent solves, collapsing throughput to serial-recurrence cost. We introduce CARVE (Content-Aware Recurrent with Value Efficiency), which fixes both and, via a single-launch "megakernel" scheduling of the same WY-form math, trains faster than the matrix-gated baseline it replaces. The key idea is architectural: restricting all gating to the key axis makes the intra-chunk coupling independent of the value index, restoring one unmodified WY-form solve. Within this constraint, CARVE conditions both gates on a content signal read once per chunk from the chunk-boundary state and folded algebraically into each gate's low-rank projection (by associativity, U(Sq)=(US)q), giving memory-aware gating at negligible extra traffic. At init the content projections are zero, so CARVE is bit-identical to the baseline; we prove the one-chunk staleness perturbs gates by only O(1/sqrt(L)), matching a measured 0.18% deviation flat up to L=128. At 1.3B parameters / 100B FineWeb-Edu tokens on H100 (three seeds), CARVE improves every axis: WikiText perplexity 15.72 vs 15.90 (hybrid 15.41 vs 15.62), +0.63 pp average common-sense accuracy, and state-of-the-art RULER and real-world recall -- while training +1.4% faster at matched depth and +19.3% at iso-quality depth, at +13% peak memory. Backed by six formal guarantees.

  • 1 authors
·
Jul 5

History Replays Itself: Unleashing Long-Context Capability in Linear Attention

Linear attention promises the efficiency needed for long-context language modelling, yet its fixed-size recurrent state must simultaneously support ongoing computation and preserve information from an ever-growing history. This coupling has reinforced a prevailing view that the state's memory capacity defines the model's long-context capability. We challenge this presumed ceiling: recurrent computation need not bear the full burden of long-term storage. We introduce NoteBank, a sparse episodic memory that archives selected text before future queries are known, uses the backbone's native features for writing and addressing, and reads retrieved evidence through its native forward computation via replay. This training-free, plug-and-play interface requires no external embedding model, separately trained retriever, or separate neural reader. At one million tokens, it raises Gated DeltaNet's mean accuracy across six RULER retrieval tasks from 1.7% to 70.3%, with no observed significant retrieval degradation from 4K to 1M tokens. This recovery adds leqslant0.025% to analytical FLOPs, with persistent context storage approximately 1/2,600 that of a Transformer's full MHA KV cache at matched width, depth, and precision. Experiments extend from three 1.3B recurrent backbones to Mamba-2-8B and post-trained Qwen3.5-9B, demonstrating gains on LongBench v1/v2 and MemoryAgentBench. Together, these results show that sparse evidence storage and native replay can substantially expand the long-context capability of pretrained linear attention models while retaining the efficiency of recurrent computation.

MInference 1.0: Accelerating Pre-filling for Long-Context LLMs via Dynamic Sparse Attention

The computational challenges of Large Language Model (LLM) inference remain a significant barrier to their widespread deployment, especially as prompt lengths continue to increase. Due to the quadratic complexity of the attention computation, it takes 30 minutes for an 8B LLM to process a prompt of 1M tokens (i.e., the pre-filling stage) on a single A100 GPU. Existing methods for speeding up prefilling often fail to maintain acceptable accuracy or efficiency when applied to long-context LLMs. To address this gap, we introduce MInference (Milliontokens Inference), a sparse calculation method designed to accelerate pre-filling of long-sequence processing. Specifically, we identify three unique patterns in long-context attention matrices-the A-shape, Vertical-Slash, and Block-Sparsethat can be leveraged for efficient sparse computation on GPUs. We determine the optimal pattern for each attention head offline and dynamically build sparse indices based on the assigned pattern during inference. With the pattern and sparse indices, we perform efficient sparse attention calculations via our optimized GPU kernels to significantly reduce the latency in the pre-filling stage of long-context LLMs. Our proposed technique can be directly applied to existing LLMs without any modifications to the pre-training setup or additional fine-tuning. By evaluating on a wide range of downstream tasks, including InfiniteBench, RULER, PG-19, and Needle In A Haystack, and models including LLaMA-3-1M, GLM4-1M, Yi-200K, Phi-3-128K, and Qwen2-128K, we demonstrate that MInference effectively reduces inference latency by up to 10x for pre-filling on an A100, while maintaining accuracy. Our code is available at https://aka.ms/MInference.

  • 12 authors
·
Jul 2, 2024 4

MTraining: Distributed Dynamic Sparse Attention for Efficient Ultra-Long Context Training

The adoption of long context windows has become a standard feature in Large Language Models (LLMs), as extended contexts significantly enhance their capacity for complex reasoning and broaden their applicability across diverse scenarios. Dynamic sparse attention is a promising approach for reducing the computational cost of long-context. However, efficiently training LLMs with dynamic sparse attention on ultra-long contexts-especially in distributed settings-remains a significant challenge, due in large part to worker- and step-level imbalance. This paper introduces MTraining, a novel distributed methodology leveraging dynamic sparse attention to enable efficient training for LLMs with ultra-long contexts. Specifically, MTraining integrates three key components: a dynamic sparse training pattern, balanced sparse ring attention, and hierarchical sparse ring attention. These components are designed to synergistically address the computational imbalance and communication overheads inherent in dynamic sparse attention mechanisms during the training of models with extensive context lengths. We demonstrate the efficacy of MTraining by training Qwen2.5-3B, successfully expanding its context window from 32K to 512K tokens on a cluster of 32 A100 GPUs. Our evaluations on a comprehensive suite of downstream tasks, including RULER, PG-19, InfiniteBench, and Needle In A Haystack, reveal that MTraining achieves up to a 6x higher training throughput while preserving model accuracy. Our code is available at https://github.com/microsoft/MInference/tree/main/MTraining.

  • 6 authors
·
Oct 21, 2025

FlashMemory-DeepSeek-V4: Lightning Index Ultra-Long Context via Lookahead Sparse Attention

Conventional LLMs keep the full KV cache loaded during decoding, causing a severe GPU memory bottleneck for ultra-long context serving. In this report, we propose Lookahead Sparse Attention (LSA), a novel inference paradigm powered by a Neural Memory Indexer built upon the DeepSeek-V4 architecture. Rather than passively attending to all historical tokens, LSA proactively predicts future context demands and preserves only the query-critical KV chunks in the GPU memory. Crucially, we instantiate this architecture via a backbone-free decoupled training strategy. By formulating the indexer as a standard dual-encoder architecture, we train it independently using standard retrieval training frameworks without ever loading the massive backbone model into GPU memory. We demonstrate that this "less is more" paradigm significantly maximizes serving efficiency while acting as an effective attention denoiser in tasks that rely on long-term global memory. Across primary long-context evaluation suites (e.g., LongBench-v2, LongMemEval, and RULER), FM-DS-V4 compresses the average physical KV cache footprint down to merely 13.5% of the full-context baseline, while consistently preserving or slightly elevating downstream accuracy (+0.6% absolute margin on average). Crucially, at extreme 500K scales, FlashMemory suppresses the physical KV cache overhead by over 90% without destabilizing the backbone's core reasoning capacities.

tencent Tencent
·
Jun 7 5

SketchSSM: Write to the Full State, Read from a Compact Sketch

Hybrid-attention models replace most softmax attention layers with linear attention, reducing KV-cache growth and enabling larger decode batches where recurrent-state access becomes a major bottleneck. ReplaySSM amortizes state updates by buffering keys and values, but each new query still requires a full-state read even though the state remains unchanged between state updates. We observe that low-rank state-weighted query approximation accurately preserves state-read outputs. Although future queries are unknown, the basis vectors used to approximate them can be fixed offline. Based on this observation, we introduce SketchSSM, which preserves full-state updates while approximating reads. At each state update, SketchSSM reads the full state once to precompute outputs for these basis vectors, storing them in a compact sketch. Each subsequent decode step combines the sketch vectors with query-dependent coefficients to reconstruct the output without a full-state read. Across four Mamba-2-, GDN-, and KDA-based models, SketchSSM at a mean sketch rank of 8 reduces state-access traffic by approximately 10times while matching the average accuracy of the FP32 full-state baseline across four decode benchmarks, and preserves recall on four RULER retrieval tasks. At this rank on one NVIDIA B300, linear-attention kernel speedups over the Standard vLLM baseline reach 7.30times, 5.02times, and 5.24times for Mamba-2, GDN, and KDA, respectively, with up to 2.77times higher decode throughput on Nemotron 3 Super.

  • 6 authors
·
Oct 5

RulerNet: Learning Perspective-Invariant Ruler Representations for Robust Image Scale Estimation

Accurately converting pixel measurements into absolute real-world dimensions remains a fundamental challenge in computer vision, limiting progress in applications such as biomedicine, forensics, nutritional analysis, and e-commerce. We introduce RulerNet, a deep learning framework that robustly infers scale in the wild by reformulating ruler reading as a unified keypoint detection problem and representing rulers with geometric progression parameters that compactly approximate the non-uniform spacing induced by perspective transformations. Unlike traditional methods that rely on handcrafted thresholds or rigid, ruler-specific pipelines, RulerNet directly localizes centimeter markings using a mark-visibility-based annotation and training strategy that remains valid under mark-preserving transformations, enabling strong generalization across diverse ruler types and imaging conditions while mitigating data scarcity. Additionally, we introduce a scalable synthetic data generation pipeline that combines graphics-based ruler creation with ControlNet-enhanced realism, significantly expanding training diversity and improving model performance. Extensive experiments on both our datasets and public benchmarks demonstrate that RulerNet achieves accurate, consistent, and efficient scale estimation under challenging real-world conditions. Integration into a medical analysis pipeline further demonstrates its practical utility for scale-aware measurement. These results suggest that RulerNet can serve as a generalizable measurement component and be readily integrated with other vision modules, such as segmentation, monocular depth estimation, and diagnostic workflows, for automated analysis in medical and other domains. An online demo is provided. The project page is at https://github.com/ymp5078/RulerNet.

  • 6 authors
·
Aug 11

Ruler: A Model-Agnostic Method to Control Generated Length for Large Language Models

The instruction-following ability of large language models enables humans to interact with AI agents in a natural way. However, when required to generate responses of a specific length, large language models often struggle to meet users' needs due to their inherent difficulty in accurately perceiving numerical constraints. To explore the ability of large language models to control the length of generated responses, we propose the Target Length Generation Task (TLG) and design two metrics, Precise Match (PM) and Flexible Match (FM) to evaluate the model's performance in adhering to specified response lengths. Furthermore, we introduce a novel, model-agnostic approach called Ruler, which employs Meta Length Tokens (MLTs) to enhance the instruction-following ability of large language models under length-constrained instructions. Specifically, Ruler equips LLMs with the ability to generate responses of a specified length based on length constraints within the instructions. Moreover, Ruler can automatically generate appropriate MLT when length constraints are not explicitly provided, demonstrating excellent versatility and generalization. Comprehensive experiments show the effectiveness of Ruler across different LLMs on Target Length Generation Task, e.g., at All Level 27.97 average gain on PM, 29.57 average gain on FM. In addition, we conduct extensive ablation experiments to further substantiate the efficacy and generalization of Ruler. Our code and data is available at https://github.com/Geaming2002/Ruler.

  • 8 authors
·
Sep 27, 2024 2

StemBind: When MLLMs Get Lost Between Rules and Instances in Abstract Visual Reasoning

Multimodal large language models (MLLMs) often know the rule but pick the wrong answer: on abstract visual reasoning (AVR) tasks, a model can describe what it sees and name the underlying pattern, yet still fail to choose the matching candidate. Existing AVR benchmarks cannot detect this because they collapse perception, rule induction, and answer selection into a single right-or-wrong signal. We introduce StemBind, a shared-stem diagnostic benchmark that probes the same visual stem with three aligned questions: Perception (what is in the image), Rule (what pattern governs it), and Full (which option completes it), so a final-answer error can be attributed to a specific sub-step on the same evidence. StemBind contains 2,298 curated knowledge-light stems across nine auditable visual operations, totaling 19,533 P/R/F tasks, with each full item annotated by Sternberg's four reasoning stages (S1 Encode, S2 Infer, S3 Map, S4 Apply). Evaluating 24 frontier MLLM configurations yields four findings. (i) The R-F chasm: rule accuracy exceeds full-item accuracy on 22 of 24 models, so most failures happen after the rule is identified. (ii) A persistent binding gap: even when P and R are both correct on the same stem, models still answer F incorrectly 51.2% of the time. (iii) The bottleneck is S3: process diagnostics and Stage-wise Stimulus Augmentation localize the dominant failure to rule-to-instance mapping. (iv) Scaling and thinking do not help: neither larger models nor explicit thinking mode reliably closes the gap, and thinking even lowers rule and full-item accuracy. StemBind reframes AVR evaluation from final-answer ranking to locating where abstract visual reasoning breaks down, identifying rule-to-instance binding as a concrete next target for vision-grounded reasoning.

  • 7 authors
·
May 28

Instruct-Tuning Pretrained Causal Language Models for Ancient Greek Papyrology and Epigraphy

This article presents an experiment in fine-tuning a pretrained causal language model (Meta's Llama 3.1 8B Instruct) for aiding in three fundamental tasks of philological research: chronological and geographic attribution as well as text restoration in ancient Greek inscriptions and documentary papyri. Using a prompt-based instruct approach, the fine-tuned models surpass the state of the art in key metrics. For inscriptions, the models achieve a lower average character error rate (CER) of 22.5% (vs. 26.3%), while closely matching top-1 accuracy (60.9% vs. 61.8%) and top-20 accuracy (77.5% vs. 78.3%) for sequences up to 10 characters. They also provide a practical advantage by ignoring spaces during reconstruction, aligning better with the scriptio continua typically used in ancient written artifacts. In geographic attribution, the model outperforms previous benchmarks with a top-1 accuracy of 75.0% (vs. 70.8%) and a top-3 accuracy of 83.7% (vs. 82.1%). For dating, it achieves an average deviation of 26.2 years (vs. 29.3) and a median deviation of 1 year (vs. 3) from the actual date range. The models also set new baselines for documentary papyri, with a CER of 16.3%, a top-1 accuracy of 71.3%, and top-20 of 85.0% in text reconstruction; a top-1 accuracy of 66.4% and top-3 of 79.9% in geographic attribution; and, in chronological attribution, a deviation of 21.7 years from the actual termini post/ante quem, with a median deviation of 0 years.

  • 1 authors
·
Sep 20, 2024

Time Present and Time Past: Benchmarking Large Language Models on Temporally Evolving Document Understanding

Evolving documents, such as laws, tax codes, and software documentation, are amended, replaced, and sometimes reverted over time, so a question has different correct answers at different dates. In contrast to encyclopedic knowledge, where an old fact is simply overwritten, an amendment is itself an official text that states what it replaces and when it takes effect, and the earlier version stays correct for its validity period. The central challenge is therefore version resolution, that is, identifying the version in force on the queried date. Existing temporal QA datasets treat time only as an annotation, so version resolution stays untested. We present TIDE, an expert-verified benchmark of 3,050 QA pairs over 644 official customs instruments issued between 1969 and 2025 by the Government of Bangladesh, covering eight task types over deeply code-mixed documents that are heterogeneous in layout and dated in two calendars. In addition, we evaluate nine recent LLMs under a single protocol across parametric, gold-context, and retrieval access, scored by a three-judge LLM council with a hard date gate separating correct meaning from correct time. The best macro-averaged accuracy is only 68.5%. Resolving a version from an implicit date reaches 59.7%, and detecting that the supplied version does not govern the query reaches only 26.7%. Models are more likely to find correct versions than to reject incorrect ones, and they tend to follow a confident parametric answer over the supplied authoritative text. All code and data are available at https://github.com/icsetepa44/TIDE

  • 7 authors
·
Aug 8

FormInv: A Measurement Protocol for Semantic Invariance in Mathematical Reasoning Benchmarks

A paraphrase-quality audit of MathCheck (ICLR 2025) detected 4 semantically incorrect paraphrases in 129 groups (3.1%); removing them drops GPT-4o from rank 2 to rank 4 and elevates Claude Haiku and DeepSeek V3 above it; these ranking changes are invisible to any single-model evaluation. Cross-model unanimity found these errors automatically (>= 3/4 models for MathCheck; >= 6/9 for our primary evaluation) for under $10; in our own dataset the same protocol found that 47% of auto-generated connective-variation paraphrases were semantically incorrect. That flaw compounds a deeper measurement gap: Claude Haiku 4.5 achieves 86% accuracy yet SCR=50%, meaning half its theorems are answered differently under semantically equivalent restatements, while aggregate accuracy across 9 models spans only 86-96% yet Semantic Consistency Rates (SCR) span 50-82% -- a 32-point gap invisible to standard benchmarks. Formally, for any target ranking over 9 frontier models there exists a weighting over paraphrase families that realizes it (No-Free-Benchmark corollary), because no model Pareto-dominates all families -- so benchmark designers who select families are implicitly choosing which model wins. FormInv supplies the audit protocol (replicated on external benchmarks at 100% recall), SCR and per-theorem Cochran's Q as primary invariance measures evaluated on 9 models across 366-811 items (on Lean4-verified theorems), and FormInvSelector for regime-aware model selection.

  • 2 authors
·
May 26

Same Simulation, Different Evidence: Where Retrieved Tool Output Costs LLM Agents Accuracy

LLM agents that compute the right answer can still answer wrongly. Agent harnesses increasingly keep long tool outputs out of the context window, saving them to files that the agent searches or reads on demand. We ask where this costs accuracy with a real scientific tool: PHREEQC, a widely used geochemistry simulator from the USGS, whose reports reach 846.8k characters and whose determinism lets every printed value be traced. Agents use it to answer 158 execution-verified multiple-choice items. When agents read the simulator's report through a section index rather than in context, GPT-5.1 and GPT-5.2 lose 11.3 and 7.9 points of accuracy, while Claude Opus 4.6 and Claude Sonnet 4.6 show no detectable cost. Re-running all 11,007 logged simulator calls shows that both GPT models compute the keyed value about as often as before; what changes is the evidence they answer from. Under retrieval they often skip the report, answer from their own higher-precision output files, and misround to a neighboring option, a failure we call evidence substitution. With the simulation held fixed, retrieval still costs GPT-5.2 9.4 points. For GPT-5.4, more frequent correct simulations mask an evidence-use loss of about ten points, leaving a net change indistinguishable from zero. Naming the authoritative output raises accuracy by 6.3-7.9 points over plain retrieval for the three GPT models; for GPT-5.1 and GPT-5.2, inlining outputs that fit works as well, while asking for correct rounding does not. Context-management choices in agent harnesses should be judged by where accuracy is lost, not only by final accuracy.

ucriverside UC Riverside
·
Oct 18 2

GDP.pdf: Benchmarking Grounded Multimodal Reasoning over Professional PDF Documents

A large share of day-to-day work in professional domains happens inside PDF files: benefits packets, leases, datasheets, clinical guidelines, construction plans. Benchmarks for document AI have generally measured the required capabilities in isolation: OCR, layout analysis, chart reasoning, table QA, document VQA. A high score on any one of them does not necessarily reveal whether a model can answer a realistic question that someone in the field would actually ask about a specific PDF. GDP_pdf is a benchmark built to measure this directly. It consists of question-document pairs authored by working professionals in ten fields, and a candidate question was kept only when at least two frontier multimodal models failed it in a way that mattered: a wrong answer, missed decisive evidence, or a fabricated claim, rather than a superficial difference such as style. Each item comes with a rubric of atomic criteria, so we can report a graded rubric score as well as a strict task-level pass rate, and each item is tagged against a taxonomy of eleven capabilities in three tiers, spanning text extraction and grounding, table and chart comprehension, cross-referencing, spatial reasoning, and abstention on unsupported queries. We report results for seventeen frontier models on the 100-item benchmark: the best model passes only 30.7% of the items and the worst passes 2%. Most errors trace back to a small set of recurring loss patterns: misaligned tables, misread charts, skipped footnotes and exclusions, miscounted floor-plan symbols, scan noise, and amendments that supersede earlier text.

  • 4 authors
·
Jul 14

RULERS: Locked Rubrics and Evidence-Anchored Scoring for Robust LLM Evaluation

The LLM-as-a-Judge paradigm promises scalable rubric-based evaluation, yet aligning frozen black-box models with human standards remains a challenge due to inherent generation stochasticity. We reframe judge alignment as a criteria transfer problem and isolate three recurrent failure modes: rubric instability caused by prompt sensitivity, unverifiable reasoning that lacks auditable evidence, and scale misalignment with human grading boundaries. To address these issues, we introduce RULERS (Rubric Unification, Locking, and Evidence-anchored Robust Scoring), a compiler-executor framework that transforms natural language rubrics into executable specifications. RULERS operates by compiling criteria into versioned immutable bundles, enforcing structured decoding with deterministic evidence verification, and applying lightweight Wasserstein-based post-hoc calibration, all without updating model parameters. Extensive experiments on essay and summarization benchmarks demonstrate that RULERS significantly outperforms representative baselines in human agreement, maintains strong stability against adversarial rubric perturbations, and enables smaller models to rival larger proprietary judges. Overall, our results suggest that reliable LLM judging requires executable rubrics, verifiable evidence, and calibrated scales rather than prompt phrasing alone. Code is available at https://github.com/LabRAI/Rulers.git.

  • 6 authors
·
Jan 12

Measuring Calibration in Deep Learning

Overconfidence and underconfidence in machine learning classifiers is measured by calibration: the degree to which the probabilities predicted for each class match the accuracy of the classifier on that prediction. How one measures calibration remains a challenge: expected calibration error, the most popular metric, has numerous flaws which we outline, and there is no clear empirical understanding of how its choices affect conclusions in practice, and what recommendations there are to counteract its flaws. In this paper, we perform a comprehensive empirical study of choices in calibration measures including measuring all probabilities rather than just the maximum prediction, thresholding probability values, class conditionality, number of bins, bins that are adaptive to the datapoint density, and the norm used to compare accuracies to confidences. To analyze the sensitivity of calibration measures, we study the impact of optimizing directly for each variant with recalibration techniques. Across MNIST, Fashion MNIST, CIFAR-10/100, and ImageNet, we find that conclusions on the rank ordering of recalibration methods is drastically impacted by the choice of calibration measure. We find that conditioning on the class leads to more effective calibration evaluations, and that using the L2 norm rather than the L1 norm improves both optimization for calibration metrics and the rank correlation measuring metric consistency. Adaptive binning schemes lead to more stablity of metric rank ordering when the number of bins vary, and is also recommended. We open source a library for the use of our calibration measures.

  • 7 authors
·
Aug 6, 2020

Precision Is Not Faithfulness: Coverage-Aware Evaluation of Grounded Generation with a Complete Oracle

Reference-free faithfulness metrics verify each atomic claim a model makes against ground truth, and are increasingly used to evaluate grounded generation. We show they share a blind spot: they measure only precision -- are the stated claims supported? -- and therefore reward abstention, since a model can score near-perfect faithfulness by saying almost nothing. We make this measurable using Formula 1 telemetry, a domain where strategic ground truth is derived deterministically and, crucially, completely: for each decision we know the full set of facts that mattered. This completeness -- absent in open-domain faithfulness benchmarks -- lets us measure recall (coverage of the relevant facts) exactly, alongside precision. On a multilingual (EN/ES/PT) benchmark of 7,253 decision instances spanning 150 races, the most precise frontier model covers under half of the relevant facts and ranks last by F1, so requiring coverage reorders the systems; the same effect reappears in a second complete-oracle domain (NOAA weather forecasts). A prompt ablation shows the low coverage is not an under-prompting artifact: explicitly asking models to be thorough does not close the gap. We pair faithfulness with coverage into a single score, validate the metric (controlled perturbation; agreement across a model-free regex extractor and a cross-family LLM extractor, system-level Spearman 1.0), and give a verifier-guided generation method that improves precision and recall without references. We release the benchmark, structured annotations, metric, baselines, and an interactive demo.

  • 1 authors
·
Jun 7 6

Safety-Flag: A Unified Benchmark for the Reliability and Calibration of LLM Content Moderators

Large language models are increasingly used for content moderation, but most evaluations still report aggregate accuracy on individual benchmarks. We introduce Safety-Flag, which places seven widely used safety benchmarks (BeaverTails, XSTest, Ethics, WildGuard, Aegis, ToxiChat, and ToxiGen) into a single balanced flag / do-not-flag protocol. We release item-level decisions and confidence scores for six general-purpose LLMs and four dedicated guards, together with three reference models, evaluated on the same items. Safety-Flag measures three dimensions of moderator reliability: error direction, probability calibration, and confidence-based error ranking for human review. They often disagree. Aggregate accuracy does not reveal error direction: one model flags 85% of benign content, whereas another misses 54% of harmful content. All six general-purpose models are overconfident; fitting one temperature per model reduces calibration error by 2.8--6.0times without changing predicted labels or confidence ordering. Confidence-based abstention lowers selective risk for every model, although the gains depend on how well confidence ranks errors. Dedicated guards produce fewer false alarms and are better calibrated, but several have higher miss rates outside their documented coverage. We release the benchmark, fixed item lists, evaluation code, per-item model outputs, and leaderboard at: https://github.com/yibo-hu-lab/safety-flag-benchmark.

  • 1 authors
·
Aug 5

SciPredict: Can LLMs Predict the Outcomes of Scientific Experiments in Natural Sciences?

Accelerating scientific discovery requires the identification of which experiments would yield the best outcomes before committing resources to costly physical validation. While existing benchmarks evaluate LLMs on scientific knowledge and reasoning, their ability to predict experimental outcomes - a task where AI could significantly exceed human capabilities - remains largely underexplored. We introduce SciPredict, a benchmark comprising 405 tasks derived from recent empirical studies in 33 specialized sub-fields of physics, biology, and chemistry. SciPredict addresses two critical questions: (a) can LLMs predict the outcome of scientific experiments with sufficient accuracy? and (b) can such predictions be reliably used in the scientific research process? Evaluations reveal fundamental limitations on both fronts. Model accuracies are 14-26% and human expert performance is approx20%. Although some frontier models exceed human performance model accuracy is still far below what would enable reliable experimental guidance. Even within the limited performance, models fail to distinguish reliable predictions from unreliable ones, achieving only approx20% accuracy regardless of their confidence or whether they judge outcomes as predictable without physical experimentation. Human experts, in contrast, demonstrate strong calibration: their accuracy increases from approx5% to approx80% as they deem outcomes more predictable without conducting the experiment. SciPredict establishes a rigorous framework demonstrating that superhuman performance in experimental science requires not just better predictions, but better awareness of prediction reliability. For reproducibility all our data and code are provided at https://github.com/scaleapi/scipredict

ScaleAI Scale AI
·
Apr 11 1

SciΠvot: Benchmarking Principal-Investigator Judgment at Pivotal Moments of Scientific AutoResearch Agents

Large language model (LLM) agents can keep scientific experiments running for months with little human supervision, but reliable autonomous research also requires scientific judgment. Evaluating scientific judgment is difficult because research decisions are open-ended and depend on project context. We construct SciΠvot, a 248-case benchmark of scientific judgment based on human corrections. The benchmark draws on records from six months of research in which senior researchers ran LLM agents on 26 projects across six scientific fields and repeatedly intervened to correct the agents' research judgments. In each case, an agent chooses between the original LLM plan and the human-corrected alternative, using only the project record available before the correction as context. We compare LLM and human performance and examine the effects of reasoning effort, access to the project record, and reconsideration. At medium reasoning effort with the project record, models systematically prefer the original LLM plan over the human-corrected alternative. Four of five frontier models perform below chance on the selected cases. The highest accuracy in the project condition across the tested models and reasoning effort settings is 63.5%, compared with 73.4% for fresh researchers. At medium effort, every model achieves lower accuracy with the project record than without it, and reconsideration does not consistently improve overall accuracy. Even with a human-corrected alternative available, frontier models struggle with the selected research decisions, while SciΠvot supports systematic evaluation of scientific judgment for LLM agents.

  • 18 authors
·
Oct 14 2

Do We Need Frontier Models to Verify Mathematical Proofs?

Advances in training, post-training, and inference-time methods have enabled frontier reasoning models to win gold medals in math competitions and settle challenging open problems. Gaining trust in the responses of these models requires that natural language proofs be checked for errors. LLM judges are increasingly being adopted to meet the growing demand for evaluating such proofs. While verification is considered easier than generation, what model capability does reliable verification actually require? We systematically evaluate four open-source and two frontier LLMs on datasets of human-graded natural language proofs of competition-level problems. We consider two key metrics: verifier accuracy and self-consistency (the rate of agreement across repeated judgments on the same proof). We observe that smaller open-source models are only up to ~10% behind frontier models in accuracy but they are up to ~25% more inconsistent. Furthermore, we see that verifier accuracy is sensitive to prompt choice across all models. We then demonstrate that the smaller models, in fact, do possess the mathematical capabilities to verify proofs at the level of frontier models, but they struggle to reliably elicit these capabilities with general judging prompts. Through an LLM-guided prompt search, we synthesize an ensemble of specialized prompts that overcome the specific failure modes of smaller models, boosting their performance by up to 9.1% in accuracy and 15.9% in self-consistency. These gains are realized across models and datasets, allowing models like Qwen3.5-35B to perform on par with frontier models such as Gemini 3.1 Pro for proof verification.

  • 4 authors
·
Apr 1

TypedBench: A Benchmark for Calibration, Framing Sensitivity, and Cost in System One Decision Models

System One models output calibrated probabilities over typed answers such as categorical choices, ordinal levels, or binary outcomes, via a non-generative interface. Software can act on these probabilities through thresholds, cost-weighted choices, and escalation rules. Consequently, if these probabilities are miscalibrated or wording-sensitive, the software ma take unintended actions leaving human operators with no textual rationale to inspect. Current evaluations largely report accuracy and calibration on public classification datasets without a clear reference. We present TypedBench, a benchmark for typed decision models like Jev built from seven policy-labelled generators and nine evaluation suites. We report accuracy as median and range across paraphrases, and calibration error relative to the finite-sample noise floor of a matched, perfectly calibrated predictor. We assess probability quality through selective prediction, ordinal proper scoring rules, and realised cost under asymmetric cost matrices. We evaluate a hosted model, an open encoder, and a family of open decoders spanning 0.8B-9B parameters on identical items. The hosted model follows the stated policy but is wording-sensitive and systematically underconfident; under asymmetric costs, using its probabilities can be worse than taking its top answer. Decoders route exactly and are slow as options or questions are added. The decoder is least accurate on policy questions and degrades with more options. Overall, typed decision models must be evaluated jointly on policy adherence, wording robustness, probability quality, and induced decision outcomes.

  • 4 authors
·
Oct 8

Effectiveness of Hidden-State Probes for Localizing Reasoning Failures

Verifying the final answer of a long reasoning trace may show that the trace is wrong but it does not distinguish three cases. The problem may lie beyond the model's capability, another attempt would succeed, or one step in an otherwise recoverable trace made the trace fail. Standard hidden-state probes are trained on final-answer correctness, a label that conflates these cases. Monte Carlo rollouts distinguish the cases and locate the failing step at additional inference cost. We test the hidden states of 4B and 8B reasoning models for the failure type and the failing step and compare each probe with the strongest baseline that uses no hidden states. On incorrect 8B traces, the confidence probe, a calibrated correctness probe at a midpoint cutoff, misses 81% of cases in which a single step makes the trace unrecoverable and 47% of cases in which another attempt would succeed. A probe with a different training design over the same states reverses the ordering of these two kinds of failure, so either ordering can be read from those states. At both scales, no single tested probe locates the failing step more accurately than a rule based only on trace length, and at 4B a probe trained to predict that step fails to outperform this rule in any of 10 runs on identical traces. The confidence probe therefore indicates that an answer is wrong, but its failure-type ordering depends on its training design.

  • 5 authors
·
Oct 14

Laya as a Typed Probabilistic Assessor: An Independent Reproduction and a Preregistered Study of Calibration and Selective Escalation

The shipped Laya Typed-Decisions checkpoint, a 421M-parameter ModernBERT-large assessor that answers typed choice/noul/score questions over workflow state, is uniformly under-confident. The signed confidence-accuracy gap is -0.214, every occupied reliability bin's accuracy exceeds its confidence, and that sign uniformity collapses every binned ECE variant to the same value, 0.214. The card frames the risk as over-confidence; the measured direction is the opposite, and the direction decides which way a confidence-gated cascade fails. A single disjointly fitted temperature (T=0.469, sharpening) removes most of the miscalibration (held-out ECE 0.204 to 0.037) and outperforms the shipped per-option-count table. The frozen selection rule instead chose isotonic regression, which overfit and failed its held-out NLL contrast on both tracks, so hypothesis H2 is not supported. Re-running the released checkpoint on its full official test split reproduces the card's headline accuracy (0.767 vs. 0.766). The retrospective E1 reproduction preceded the analysis freeze; E2-E8 were prospectively preregistered, and 20 of 22 executed confirmatory tests reject under Benjamini-Hochberg FDR at q=0.05 (two descoped). The frozen gate beats random escalation but misses its 10% accepted-set error target on both tracks, an exploratory out-of-distribution probe finds no zero-shot transfer (accuracy 0.617), and every score measures agreement with a synthetic teacher whose self-agreement ceiling (0.735) the specialist exceeds. Per-decision predictions, run manifests, and the frozen preregistration are in the ancillary files. The author has no affiliation with the model's publisher, the dataset's publisher, or TypeSafe.

  • 1 authors
·
Sep 26

When Should a Failing Robot Ask? Initiating Corrective Human-Robot Dialogue from Audited Sensor Evidence

A robot that fails at a task faces the first decision in corrective dialogue: act on its own diagnosis, consult another onboard sensor, or interrupt a person. Choosing well requires knowing how much the robot's sensors reveal about the cause and how reliable the robot's own diagnosis is. We build a simulated benchmark in which every failure's true cause is known, because we injected it, and measure what each sensor reveals, with explicit checks against data leakage. Some failures are diagnosable from camera images; others only from the robot's force data (0.99 from force data, no image method above 0.55). We then test six open vision-language models. Their behavior tracks the surface of the prompt, not the evidence: moving the refusal option from last to first in the answer list collapses refusal rates from 78-100% to 0-6% in three of the six swept model-and-family pairs. Accuracy from frames stays at or below a majority-class baseline under every prompt variant, with or without worked examples, and stated confidence carries no information about correctness. Handing the same models the force data as ten lines of text produces the first above-baseline diagnoses, in four of the six models: much of the failure reflects missing sensor data, not missing ability. We pose the choice as a three-action decision problem, act, consult your own sensors, or ask a human, whose optimal policy follows from measured accuracy. The models do not follow it, and their ask rates ignore a fourfold change in question cost. One question to a human still lifts them from that baseline to roughly the answerer's own reliability (0.70-0.81 when they ask). The decision to ask should be tied to measured accuracy and stated costs, not to the model's confidence.

  • 2 authors
·
Sep 17

Excess Separability: Nuisance-Controlled Residual-Stream Probing for Benchmark Contamination Detection

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

  • 1 authors
·
Aug 15

RULER: Instance-aware Rubric Rewards for SVG Generation

Generating Scalable Vector Graphics (SVG) code from natural-language instructions is an open-ended task without absolute visual ground truth, leaving both evaluation and policy optimization without a faithful signal. Scalar metrics (CLIP, Aesthetic) calibrated on natural images transfer poorly to stylized vector content, and reusing them as RL rewards triggers reward hacking. We address both limitations with rubric-based scoring. We first establish empirically that prompting a vision-language judge with a multi-axis rubric correlates with human judgments far better than scalar metrics, both across samples and within instructions. Building on this finding, we introduce RULER (Instance-aware Rubric Rewards for Reinforcement Learning), which converts each instruction into an instance-aware rubric of six items spanning semantic, visual, and stylistic axes; a judge VLM scores rendered rollouts item-by-item, and the weighted satisfactions form a fine-grained reward optimized via Group Relative Policy Optimization. Because the rubric is derived from text alone, RULER requires neither paired SVG ground truth nor human preference labels. On MMSVG-Illustration and MMSVG-Icon, RULER lifts the rubric score from 0.432/0.395 to 0.693/0.683, surpassing dedicated SVG specialists and matching the substantially larger DeepSeek-V3, with ablations identifying rubric design as the active lever for RL on open-ended SVG generation. The project page is available at https://hangyuran.github.io/RULER/.

inclusionAI inclusionAI
·
Sep 20 4

Evaluating the Factual Consistency of Large Language Models Through News Summarization

While large language models (LLMs) have proven to be effective on a large variety of tasks, they are also known to hallucinate information. To measure whether an LLM prefers factually consistent continuations of its input, we propose a new benchmark called FIB(Factual Inconsistency Benchmark) that focuses on the task of summarization. Specifically, our benchmark involves comparing the scores an LLM assigns to a factually consistent versus a factually inconsistent summary for an input news article. For factually consistent summaries, we use human-written reference summaries that we manually verify as factually consistent. To generate summaries that are factually inconsistent, we generate summaries from a suite of summarization models that we have manually annotated as factually inconsistent. A model's factual consistency is then measured according to its accuracy, i.e.\ the proportion of documents where it assigns a higher score to the factually consistent summary. To validate the usefulness of FIB, we evaluate 23 large language models ranging from 1B to 176B parameters from six different model families including BLOOM and OPT. We find that existing LLMs generally assign a higher score to factually consistent summaries than to factually inconsistent summaries. However, if the factually inconsistent summaries occur verbatim in the document, then LLMs assign a higher score to these factually inconsistent summaries than factually consistent summaries. We validate design choices in our benchmark including the scoring method and source of distractor summaries. Our code and benchmark data can be found at https://github.com/r-three/fib.

  • 6 authors
·
Nov 15, 2022

R_{rm e}, or not R_{rm e}: Developing R_5equiv R_{-2} as a scale radius for galaxy sizes, masses, and mass-to-light ratios

The effective half-light radius R_{rm e} marks an arbitrary 50-per-cent light boundary, and scaling relations involving such {\it effective} radii and their associated surface brightnesses, μ_{rm e}, systematically (and undesirably) vary as the percentage changes. Here, the projected radius R_5equiv R_{-2}, where the logarithmic slope of the surface-brightness and intensity profile equals 5.00,mag,dex^{-1} and -2, respectively, and where the luminosity contributed per logarithmic radial interval is maximal, is developed as an alternative. It can be measured non-parametrically or with a parametrized fit. For the Sérsic R^{1/n} family, the exact relation R_5=(2n/b_n)^n,R_{rm e} is derived, with R_5/R_{rm e}rm e^{1/6}approx1.181 as nrightarrowinfty. Reparameterizing the (now b_n-free) R^{1/n} model in terms of the observable pair (R_5,μ_5) removes the non-linear R_{rm e}--n coupling, and because the local slope is 5,mag,dex^{-1} at R_5, correlated measurement errors in R_5 and μ_5 largely cancel when deriving the inferred total magnitude. Additionally, an exact single-integral identity is provided to relate any projected light fraction to the fraction within a sphere of the same radius. The directly observable R_5 is shown to be connected, through a weakly n-dependent factor to the anisotropy-insensitive intrinsic radius r_{-3}, yielding a refined n-dependent Wolf-type mass estimator M_{-3} and spatial mass-to-light ratio (M_{rm dyn}/L)_{-3}. Specifically, M_{-3}approx4,G^{-1}langleσ_{rm los}^2rangle,R_{-2}approx4.72,G^{-1}langleσ_{rm los}^2rangle,R_{rm e}. Past half-light substitutions in dynamical mass estimators introduce systematic Sérsic-dependent offsets of 12--18 per~cent in enclosed mass and offsets spanning >20 per~cent in the mass-to-light ratio.

  • 1 authors
·
Aug 21

Do System One Decisions Add Up? A Study of Probabilistic Coherence

A decision model can give probabilities that sum to one for every question yet disagree with itself when the same decision is broken into smaller steps. We study this form of probabilistic coherence in Jev and the English Laya checkpoint, using 2,500 matched examples per system across TREC, CLINC150, and MASSIVE. Across 72,000 classification questions, we compare direct fine-label predictions with broad-category probabilities and predictions reconstructed through those categories. Both systems show substantial disagreement: mean category-level total variation ranges from 0.219 to 0.349 for Jev and from 0.424 to 0.689 for Laya, on a scale where zero means exact agreement. The consequences differ sharply. On CLINC150, reconstruction reduces Jev's accuracy by 22.9 percentage points (paired 95% bootstrap interval: [-24.9, -20.9]) and improves Laya's by 21.3 points ([18.0, 24.5]). The same directions hold across all three datasets, with all six unadjusted accuracy-change intervals excluding zero. Improved accuracy can also accompany less reliable confidence: on MASSIVE, Laya gains 9.2 accuracy points while its expected calibration error rises from 0.046 to 0.124. Error analysis identifies both broad-category mistakes and within-category confusions. These findings show why decision systems need joint evaluation of accuracy, confidence calibration, and probability coherence in the workflow used by an application.

  • 1 authors
·
Sep 26

Modelling & Steady State Compliance Testing of an Improved Time Synchronized Phasor Measurement Unit Based on IEEE Standard C37.118.1

Synchrophasor technology is an emerging and developing technology for monitoring and control of wide area measurement systems (WAMS). In an elementary WAMS, two identical phasors measured at two different locations have difference in the phase angles measured since their reference waveforms are not synchronized with each other. Phasor measurement units (PMUs) measure input phasors with respect to a common reference wave based on the atomic clock pulses received from global positioning system (GPS) satellites, eliminating variation in the measured phase angles due to distant locations of the measurement nodes. This has found tremendous applications in quick fault detection, fault location analysis, accurate current, voltage, frequency and phase angle measurements in WAMS. Commercially available PMU models are often proven to be expensive for research and development as well as for grid integration projects. This research article proposes an economic PMU model optimized for accurate steadystate performance based on recursive discrete Fourier transform (DFT) and provides results and detailed analysis of the proposed PMU model as per the steady state compliance specifications of IEEE standard C37.118.1. Results accurate up to 13 digits after decimal point are obtained through the developed PMU model for both nominal and off-nominal frequency inputs in steady state.

  • 1 authors
·
Apr 14, 2025

Non-Uniform Spatial Alignment Errors in sUAS Imagery From Wide-Area Disasters

This work presents the first quantitative study of alignment errors between small uncrewed aerial systems (sUAS) geospatial imagery and a priori building polygons and finds that alignment errors are non-uniform and irregular. The work also introduces a publicly available dataset of imagery, building polygons, and human-generated and curated adjustments that can be used to evaluate existing strategies for aligning building polygons with sUAS imagery. There are no efforts that have aligned pre-existing spatial data with sUAS imagery, and thus, there is no clear state of practice. However, this effort and analysis show that the translational alignment errors present in this type of data, averaging 82px and an intersection over the union of 0.65, which would induce further errors and biases in downstream machine learning systems unless addressed. This study identifies and analyzes the translational alignment errors of 21,619 building polygons in fifty-one orthomosaic images, covering 16787.2 Acres (26.23 square miles), constructed from sUAS raw imagery from nine wide-area disasters (Hurricane Ian, Hurricane Harvey, Hurricane Michael, Hurricane Ida, Hurricane Idalia, Hurricane Laura, the Mayfield Tornado, the Musset Bayou Fire, and the Kilauea Eruption). The analysis finds no uniformity among the angle and distance metrics of the building polygon alignments as they present an average degree variance of 0.4 and an average pixel distance variance of 0.45. This work alerts the sUAS community to the problem of spatial alignment and that a simple linear transform, often used to align satellite imagery, will not be sufficient to align spatial data in sUAS orthomosaic imagery.

  • 6 authors
·
May 10, 2024

LLMs Don't Know What They Know: Benchmarking Temporal Self-Knowledge for Financial Backtesting

Financial backtests of large language models (LLMs) are meaningful only if the model did not already know the outcomes it is asked to predict. Practitioners guard against this by trusting a vendor's stated knowledge cutoff, by asking the model what it knows, or by instructing it to answer as of a past date. To verify whether any of these safeguards can be trusted, we introduce FinDendro, a benchmark of 2,226 dated U.S. facts from 1999 to 2026, covering monthly macroeconomic series, month-end stock prices and Federal Reserve decisions. Each fact yields four prompts: a value question, Recall and Predict questions that pair each candidate value with a claim of knowing or guessing without a declared date, and a Predict question with a historical declared date. Controls for persistence and dominant outcomes keep chance accuracy near 0.27. Results show that for most frontier models, self-reports understate knowledge. GPT-5 answers 76% of controlled facts correctly but claims to know 38%, and answers 61% of the facts it says it does not know. Knowledge claims can persist beyond the measured knowledge boundary, by up to seven quarters, and a declared date removes most of the claims of prior knowledge while leaving accuracy unchanged. Backtests inside a model's training window therefore cannot be certified leak-free by self-report, instruction or stated cutoff. These findings motivate behavioral measurement of temporal knowledge boundaries, and FinDendro provides a benchmark and procedure for selecting backtest periods based on demonstrated factual knowledge.

TheFinAI The Fin AI
·
Nov 3 3

Data Annotation as Measurement

Modern AI systems depend on annotated data, but annotation is rarely treated as the act of measurement that it is. Instead, annotation quality is commonly reduced to agreement: if multiple annotators assign the same annotation to a data instance, the annotations are taken to be high-quality. Yet agreement does not establish whether annotations validly capture the underlying concept they are meant to represent. In this paper, we argue that data annotation should be understood as a measurement problem. Like other forms of measurement, annotation requires defining a concept, operationalizing it through an instrument, applying that instrument, and evaluating the reliability and validity of the resulting measurements. Drawing on a literature review of annotation quality research (N=132) and semi-structured interviews with annotation team members (N=10), we develop a framework for diagnosing and correcting annotation issues. First, we map key decision points across annotation processes - including task design, annotator management, quality assessment, quality improvement, and adjudication - that shape annotation outcomes. Second, we identify five distinct sources of annotation issues: error, ambiguity, impossibility, subjectivity, and annotator identity. Annotation problems that appear similar at the level of outcomes often require different process-level interventions based on their sources. Finally, we translate measurement theory into practical guidance for annotation teams, showing how assessments of reliability and validity can move beyond agreement alone. By reframing annotation as measurement, we offer a conceptual foundation for improving the quality of annotated data used in AI research and practice.

  • 3 authors
·
Aug 6

More efficient manual review of automatically transcribed tabular data

Machine learning methods have proven useful in transcribing historical data. However, results from even highly accurate methods require manual verification and correction. Such manual review can be time-consuming and expensive, therefore the objective of this paper was to make it more efficient. Previously, we used machine learning to transcribe 2.3 million handwritten occupation codes from the Norwegian 1950 census with high accuracy (97%). We manually reviewed the 90,000 (3%) codes with the lowest model confidence. We allocated those 90,000 codes to human reviewers, who used our annotation tool to review the codes. To assess reviewer agreement, some codes were assigned to multiple reviewers. We then analyzed the review results to understand the relationship between accuracy improvements and effort. Additionally, we interviewed the reviewers to improve the workflow. The reviewers corrected 62.8% of the labels and agreed with the model label in 31.9% of cases. About 0.2% of the images could not be assigned a label, while for 5.1% the reviewers were uncertain, or they assigned an invalid label. 9,000 images were independently reviewed by multiple reviewers, resulting in an agreement of 86.43% and disagreement of 8.96%. We learned that our automatic transcription is biased towards the most frequent codes, with a higher degree of misclassification for the lowest frequency codes. Our interview findings show that the reviewers did internal quality control and found our custom tool well-suited. So, only one reviewer is needed, but they should report uncertainty.

  • 5 authors
·
Jun 28, 2023

K-Bench: measuring model performance on real scientific agent requests

Benchmarks for scientific artificial intelligence are mostly written to be scored: multiple-choice questions, curated agent tasks with reference solutions, or simulators with a known generative structure. Real scientific requests arrive differently. They are underspecified, they carry attachments, and lack ground truth. We report K-Bench 01, an evaluation built from first-turn requests sampled from live user traffic on K-Dense Web and run end to end by nine frontier models in identical sandboxes, yielding 1,602 completed agent runs. Three blinded language-model judges scored every run against an eight-dimension rubric. On a rubric whose 8-anchor instructs judges that a domain scientist would accept the work with minor edits, no model clears the line under all three judges. gpt-5.6-sol has the highest pooled mean, 8.04, but its 95% interval [7.80, 8.23] spans the threshold, and two of the three judges rank claude-opus-5 first instead. We therefore report the ordering of systems as the reproducible quantity, the absolute level as an attribute of the instrument, and the top of the table as unresolved. Across all 39,934 scored judgments -- the eight dimension scores plus a holistic overall for each assessment, excluding not-applicable cells -- 47.6% fall below the 8-point threshold. Difficulty is not uniform across the rubric: scientific accuracy averages 6.22 against 7.33 for communication, on identical denominators and in the same direction within every one of the nine models. The single leading failure tag is overclaiming, on 31.4% of assessments. We argue that the informative quantity for scientific agents is not a leaderboard position but the joint distribution of what was delivered, what was claimed, and what artifacts were produced.

  • 4 authors
·
Aug 20

DecisionPivot: A Diagnostic Benchmark for Decision Models in LLM Systems

Decision models support routing, guardrails, and output verification in LLM systems. However, item accuracy alone cannot establish whether models make correct decisions across controlled variations or assign reliable confidence to their predictions. We introduce DecisionPivot, a diagnostic benchmark comprising 48 tasks and 40,033 items across seven decision roles. Its core track contains 7,800 items from 13 generated task families, organized into contrast groups with computed answers verified by independently implemented solvers. The complementary reference track contains 32,233 items from 35 public test sets, preserving their original evaluation metrics. We evaluate 40 decision models and 14 general models using documented, model-specific protocols, assessing item and contrast-group accuracy, probability ordering, calibration, and empirical selective coverage. Our results reveal substantial differences obscured by aggregate scores: two 27B models separated by only 2.6 points on the reference track achieve contrast-group accuracies of 70.1% and 44.2%. Across 2,400 binary contrast pairs, Perplexity Decider correctly ranks the positive member above the negative member in 92.3% of pairs but answers both members correctly in only 74.1%, exposing a gap between probability ordering and decision correctness. Models with similar item accuracy also differ in the reliability of their high-confidence predictions. On a separate 1,296-item subset, GLM-5.3 achieves 93.5\% contrast-group accuracy at a higher reasoning setting, compared with 81.5% at its lowest effort. By linking errors to pivotal details and difficulty levels, DecisionPivot provides fine-grained diagnostics of decision failures that aggregate evaluation alone cannot reveal.

startlux-models StartLux
·
Oct 19 3