Daily Papers

Teleoperated robotic manipulators enable the collection of demonstration data, which can be used to train control policies through imitation learning. However, such methods can require significant amounts of training data to develop robust policies or adapt them to new and unseen tasks. While expert feedback can significantly enhance policy performance, providing continuous feedback can be cognitively demanding and time-consuming for experts. To address this challenge, we propose to use a cable-driven teleoperation system which can provide spatial corrections with 6 degree of freedom to the trajectories generated by a policy model. Specifically, we propose a correction method termed Decaying Relative Correction (DRC) which is based upon the spatial offset vector provided by the expert and exists temporarily, and which reduces the intervention steps required by an expert. Our results demonstrate that DRC reduces the required expert intervention rate by 30\% compared to a standard absolute corrective method. Furthermore, we show that integrating DRC within an online imitation learning framework rapidly increases the success rate of manipulation tasks such as raspberry harvesting and cloth wiping.

Handheld data collection systems, such as the Universal Manipulation Interface (UMI), enable scalable data collection across diverse environments but only capture observed actions rather than the desired actions executed by a robot controller. In contrast, teleoperation captures desired actions directly, but is prohibitively time-consuming to collect. We revisit this trade-off through the lens of action validity across task phases. We observe that handheld trajectories provide valid supervision in tolerant, free-space phases, but lack dynamic feasibility in contact-sensitive phases, where tracking observed trajectories at high stiffness produces large, unsafe contact forces. We study the interaction between these two supervision types for contact-rich manipulation and find that training policies that combine handheld data with a small number of targeted teleoperated demonstrations provide an efficient hybrid strategy. Specifically, rather than teleoperating the entire task, we only collect partial teleoperated demonstrations for task segments where base handheld policies fail. However, naively mixing handheld and teleoperated phase-specific data yields worse performance than training on handheld data alone. To address this mismatch between observed and desired supervision, we propose Bi-modal Routing for Imitation Data via Gated Experts (BRIDGE), a mixture of diffusion policy experts that routes between specialist task phase heads conditioned on the current robot state. Notably, our approach enables task-phase specific use of desired actions during contact sensitive segments and improves success rates over handheld-only baselines by up to 36.7% across three contact-rich manipulation tasks.

When dealing with the haptic teleoperation of multi-limbed mobile manipulators, the problem of mitigating the destabilizing effects arising from the communication link between the haptic device and the remote robot has not been properly addressed. In this work, we propose a passive control architecture to haptically teleoperate a legged mobile manipulator, while remaining stable in the presence of time delays and frequency mismatches in the master and slave controllers. At the master side, a discrete-time energy modulation of the control input is proposed. At the slave side, passivity constraints are included in an optimization-based whole-body controller to satisfy the energy limitations. A hybrid teleoperation scheme allows the human operator to remotely operate the robot's end-effector while in stance mode, and its base velocity in locomotion mode. The resulting control architecture is demonstrated on a quadrupedal robot with an artificial delay added to the network.

Retargeting human motion to robot poses is a practical approach for teleoperating bimanual humanoid robot arms, but existing methods can be suboptimal and slow, often causing undesirable motion or latency. This is due to optimizing to match robot end-effector to human hand position and orientation, which can also limit the robot's workspace to that of the human. Instead, this paper reframes retargeting as an orientation alignment problem, enabling a closed-form, geometric solution algorithm with an optimality guarantee. The key idea is to align a robot arm to a human's upper and lower arm orientations, as identified from shoulder, elbow, and wrist (SEW) keypoints; hence, the method is called SEW-Mimic. The method has fast inference (3 kHz) on standard commercial CPUs, leaving computational overhead for downstream applications; an example in this paper is a safety filter to avoid bimanual self-collision. The method suits most 7-degree-of-freedom robot arms and humanoids, and is agnostic to input keypoint source. Experiments show that SEW-Mimic outperforms other retargeting methods in computation time and accuracy. A pilot user study suggests that the method improves teleoperation task success. Preliminary analysis indicates that data collected with SEW-Mimic improves policy learning due to being smoother. SEW-Mimic is also shown to be a drop-in way to accelerate full-body humanoid retargeting. Finally, hardware demonstrations illustrate SEW-Mimic's practicality. The results emphasize the utility of SEW-Mimic as a fundamental building block for bimanual robot manipulation and humanoid robot teleoperation.

Teleoperation of robotic systems for precise and delicate object grasping requires high-fidelity haptic feedback to obtain comprehensive real-time information about the grasp. In such cases, the most common approach is to use kinesthetic feedback. However, a single contact point information is insufficient to detect the dynamically changing shape of soft objects. This paper proposes a novel telemanipulation system that provides kinesthetic and cutaneous stimuli to the user's hand to achieve accurate liquid dispensing by dexterously manipulating the deformable object (i.e., pipette). The experimental results revealed that the proposed approach to provide the user with multimodal haptic feedback considerably improves the quality of dosing with a remote pipette. Compared with pure visual feedback, the relative dosing error decreased by 66\% and task execution time decreased by 18\% when users manipulated the deformable pipette with a multimodal haptic interface in combination with visual feedback. The proposed technology can be potentially implemented in delicate dosing procedures during the antibody tests for COVID-19, chemical experiments, operation with organic materials, and telesurgery.

This paper presents KUKAloha, a general, low-cost, and shared-control teleoperation framework designed for construction robot arms. The proposed system employs a leader-follower paradigm in which a lightweight leading arm enables intuitive human guidance for coarse robot motion, while an autonomous perception module based on AprilTag detection performs precise alignment and grasp execution. By explicitly decoupling human control from fine manipulation, KUKAloha improves safety and repeatability when operating large-scale manipulators. We implement the framework on a KUKA robot arm and conduct a usability study with representative construction manipulation tasks. Experimental results demonstrate that KUKAloha reduces operator workload, improves task completion efficiency, and provides a practical solution for scalable demonstration collection and shared human-robot control in construction environments.

Learning from demonstrations has shown to be an effective approach to robotic manipulation, especially with the recently collected large-scale robot data with teleoperation systems. Building an efficient teleoperation system across diverse robot platforms has become more crucial than ever. However, there is a notable lack of cost-effective and user-friendly teleoperation systems for different end-effectors, e.g., anthropomorphic robot hands and grippers, that can operate across multiple platforms. To address this issue, we develop ACE, a cross-platform visual-exoskeleton system for low-cost dexterous teleoperation. Our system utilizes a hand-facing camera to capture 3D hand poses and an exoskeleton mounted on a portable base, enabling accurate real-time capture of both finger and wrist poses. Compared to previous systems, which often require hardware customization according to different robots, our single system can generalize to humanoid hands, arm-hands, arm-gripper, and quadruped-gripper systems with high-precision teleoperation. This enables imitation learning for complex manipulation tasks on diverse platforms.

We propose U-Arm, a low-cost and rapidly adaptable leader-follower teleoperation framework designed to interface with most of commercially available robotic arms. Our system supports teleoperation through three structurally distinct 3D-printed leader arms that share consistent control logic, enabling seamless compatibility with diverse commercial robot configurations. Compared with previous open-source leader-follower interfaces, we further optimized both the mechanical design and servo selection, achieving a bill of materials (BOM) cost of only \50.5 for the 6-DoF leader arm and 56.8 for the 7-DoF version. To enhance usability, we mitigate the common challenge in controlling redundant degrees of freedom by %engineering methods mechanical and control optimizations. Experimental results demonstrate that U-Arm achieves 39\% higher data collection efficiency and comparable task success rates across multiple manipulation scenarios compared with Joycon, another low-cost teleoperation interface. We have open-sourced all CAD models of three configs and also provided simulation support for validating teleoperation workflows. We also open-sourced real-world manipulation data collected with U-Arm. The project website is https://github.com/MINT-SJTU/LeRobot-Anything-U-Arm.

Teleoperation is a key approach for collecting high-quality, physically consistent demonstrations for robotic manipulation. However, teleoperation for dexterous manipulation remains constrained by: (i) inaccurate hand-robot motion mapping, which limits teleoperated dexterity, and (ii) limited tactile feedback that forces vision-dominated interaction and hinders perception of contact geometry and force variation. To address these challenges, we present TAG, a low-cost glove system that integrates precise hand motion capture with high-resolution tactile feedback, enabling effective tactile-in-the-loop dexterous teleoperation. For motion capture, TAG employs a non-contact magnetic sensing design that provides drift-free, electromagnetically robust 21-DoF joint tracking with joint angle estimation errors below 1 degree. Meanwhile, to restore tactile sensation, TAG equips each finger with a 32-actuator tactile array within a compact 2 cm^2 module, allowing operators to directly feel physical interactions at the robot end-effector through spatial activation patterns. Through real-world teleoperation experiments and user studies, we show that TAG enables reliable real-time perception of contact geometry and dynamic force, improves success rates in contact-rich teleoperation tasks, and increases the reliability of demonstration data collection for learning-based manipulation.

Vision-based teleoperation offers the possibility to endow robots with human-level intelligence to physically interact with the environment, while only requiring low-cost camera sensors. However, current vision-based teleoperation systems are designed and engineered towards a particular robot model and deploy environment, which scales poorly as the pool of the robot models expands and the variety of the operating environment increases. In this paper, we propose AnyTeleop, a unified and general teleoperation system to support multiple different arms, hands, realities, and camera configurations within a single system. Although being designed to provide great flexibility to the choice of simulators and real hardware, our system can still achieve great performance. For real-world experiments, AnyTeleop can outperform a previous system that was designed for a specific robot hardware with a higher success rate, using the same robot. For teleoperation in simulation, AnyTeleop leads to better imitation learning performance, compared with a previous system that is particularly designed for that simulator. Project page: http://anyteleop.com/.

While humans can use parts of their arms other than the hands for manipulations like gathering and supporting, whether robots can effectively learn and perform the same type of operations remains relatively unexplored. As these manipulations require joint-level control to regulate the complete poses of the robots, we develop AirExo, a low-cost, adaptable, and portable dual-arm exoskeleton, for teleoperation and demonstration collection. As collecting teleoperated data is expensive and time-consuming, we further leverage AirExo to collect cheap in-the-wild demonstrations at scale. Under our in-the-wild learning framework, we show that with only 3 minutes of the teleoperated demonstrations, augmented by diverse and extensive in-the-wild data collected by AirExo, robots can learn a policy that is comparable to or even better than one learned from teleoperated demonstrations lasting over 20 minutes. Experiments demonstrate that our approach enables the model to learn a more general and robust policy across the various stages of the task, enhancing the success rates in task completion even with the presence of disturbances. Project website: https://airexo.github.io/

Whole-body teleoperation requires users to coordinate perception, manipulation, posture, and mobility across multiple robot components. This coordination is difficult because users must simultaneously control the robot's head, arms, torso, and base while maintaining task awareness and avoiding kinematic or environmental constraints. In this paper, we propose coupled egocentric control, a body-following teleoperation approach in which the robot's torso and base automatically respond to the operator's head and arm motions. Rather than requiring explicit touchpad commands for every torso or base adjustment, the system lets users focus on gaze and hand control: head pitch adjusts torso height, head yaw drives base rotation, end-effector height adjusts torso motion, and end-effector workspace boundaries trigger base translation. We evaluate this approach in a user study on whole-body teleoperation of a TIAGo mobile manipulator for home-care-inspired tasks. Compared with a baseline hybrid interface, coupled egocentric control improves object manipulation efficiency, reduces button-based control effort and arm singularities, lowers mental demand and overall workload, and increases ease of use, ease of learning, confidence, and user preference for torso and base control.

Teleoperation serves as a powerful method for collecting on-robot data essential for robot learning from demonstrations. The intuitiveness and ease of use of the teleoperation system are crucial for ensuring high-quality, diverse, and scalable data. To achieve this, we propose an immersive teleoperation system Open-TeleVision that allows operators to actively perceive the robot's surroundings in a stereoscopic manner. Additionally, the system mirrors the operator's arm and hand movements on the robot, creating an immersive experience as if the operator's mind is transmitted to a robot embodiment. We validate the effectiveness of our system by collecting data and training imitation learning policies on four long-horizon, precise tasks (Can Sorting, Can Insertion, Folding, and Unloading) for 2 different humanoid robots and deploy them in the real world. The system is open-sourced at: https://robot-tv.github.io/

Humanoid robots can extend human presence to remote, constrained, or hazardous environments, but existing teleoperation interfaces often require physically demanding motion tracking or cognitively demanding low-level control. This paper presents an immersive teleoperation framework that integrates voice-controlled locomotion, VR-based manipulation, and bidirectional social interaction for whole-body humanoid control. Using Apple Vision Pro, the operator receives egocentric visual feedback, issues natural-language locomotion commands, and teleoperates the robot's arms and dexterous hands through wrist and finger tracking. An LLM-assisted voice-control module converts spoken instructions into high-level locomotion commands, while the manipulation module retargets human hand motions to the robot through inverse kinematics and PD control. The system also records multimodal data, including egocentric RGB observations, voice/text commands, joint states, hand motions, and eye-gaze signals, supporting future imitation learning and autonomy. We evaluate the framework on a Unitree H1 humanoid equipped with dexterous hands in manipulation and social interaction tasks. Results show that novice users can successfully operate the system after brief familiarization, achieving 80\% success in object manipulation and 70\% success in a social cube-passing task. These results demonstrate the potential of immersive, language-assisted teleoperation as an accessible interface for humanoid interaction, remote assistance, and multimodal data collection.

Industrial automation is at a pivotal moment, as Physical AI is driving a transition from rigid, hand-engineered automation systems toward more flexible and adaptive systems. This shift has created a growing demand for large-scale, real-world robot demonstration data, making teleoperation an increasingly important mechanism for data collection. However, high-quality teleoperated demonstrations remain difficult to obtain in practice, as novice operators often produce episodes that are task-successful but suboptimal for downstream use due to inefficient motion, repeated corrections, or operation near robot joint limits. We present a Data Quality Assessment and Feedback (DQAF) framework that closes the loop in teleoperation by providing immediate post-episode feedback grounded in semantic task progress and robot telemetry. The framework extracts quality relevant signals such as sub-task progress, motion smoothness, stalls, kinematic limits and converts them into structured quality assessments and actionable natural-language feedback. Unlike binary success or failure feedback, the proposed system explains why an episode is suboptimal and highlights specific behaviors to correct in the next trial. We evaluate the framework through a diagnostic validation study and a pilot user study. In the validation study, the system is compared with a human reviewer during dataset curation, producing rejection reasons and actionable feedback for improvement. In the pilot study with three novice operators across two manipulation tasks, the operator who received the systems immediate, automated post-episode feedback improved faster than those who did not, producing higher-quality demonstrations sooner.

Recent advances in robot learning have generated significant interest in capable platforms that may eventually approach human-level competence. This interest, combined with the commoditization of actuators, has propelled growth in low-cost robotic platforms. However, the optimal form factor for mobile manipulation, especially on a budget, remains an open question. We introduce YOR, an open-source, low-cost mobile manipulator that integrates an omnidirectional base, a telescopic vertical lift, and two arms with grippers to achieve whole-body mobility and manipulation. Our design emphasizes modularity, ease of assembly using off-the-shelf components, and affordability, with a bill-of-materials cost under 10,000 USD. We demonstrate YOR's capability by completing tasks that require coordinated whole-body control, bimanual manipulation, and autonomous navigation. Overall, YOR offers competitive functionality for mobile manipulation research at a fraction of the cost of existing platforms. Project website: https://www.yourownrobot.ai/

Humans routinely wield tools, swap grasps, and reposition objects within a single hand, seamlessly orchestrating contact transitions that span translation, reorientation, and finger gaiting. Endowing robot dexterous hands with this level of in-hand dexterity through teleoperation requires precise control of object motion via dynamic hand-object contact, yet current teleoperation systems remain far from this capability. To bridge this gap, we take a major step towards human-level dexterous teleoperation by introducing TeleDexter, a hand-object co-tracking controller that maps operator intent into learned, low-level contact execution. The controller is trained on consecutive co-tracking subgoals derived from human reference motions, utilizing a hybrid reward that couples sparse subgoal objectives with dense tracking rewards to enable learning across diverse interaction modalities rather than frame-wise trajectory imitation. The entire pipeline requires only single-stage RL and, with random action masking and domain randomization, transfers zero-shot to the real robot. We evaluate TeleDexter on seven challenging dexterous teleoperation tasks spanning object reorientation and long-horizon tool use across two dexterous hands, achieving a 75% average success rate where all baselines consistently fail. Furthermore, the collected demonstrations successfully train autonomous policies via behavioral cloning, marking a concrete step towards human-level dexterous teleoperation.

Robotics manipulation research increasingly focuses on two-finger parallel grippers for their effectiveness, affordability, and ease of teleoperation. Grippers are nonetheless limited by their form factor, often requiring bimanual setups even for simple reorientation tasks. Anthropomorphic hands are a more natural platform for dexterous robot learning -- closer to the human hand, and capable of learning from human video -- yet they remain hard to use in learning research: even where open and accessible hand hardware exists, the software for control, simulation, teleoperation, and retargeting is scattered in one-off code bases, and largely disconnected from the robot-learning ecosystem. In this work, we introduce the \orca~learning stack, an open-source research stack for dexterity as a first-class robot learning domain. Our \orca~stack unifies low-level control, simulation, teleoperation from a range of consumer platforms, and hand retargeting, behind a single interface, and integrates natively with popular robot-learning frameworks such as \lerobot, so dexterous hand researchers can leverage the same data, training, and evaluation pipelines used for non-dexterous robot learning. We demonstrate a complete end-to-end workflow, collecting expert demonstrations of an in-hand reorientation task by teleoperation with a consumer-grade VR headset, training an autonomous policy with \lerobot, and evaluating the learned policy in a fully reproducible and observable setup. We open-source the entire stack as a shared, reproducible foundation for dexterous-manipulation research.

The teleoperation of robotic systems in medical applications requires stable and convenient visual feedback for the operator. The most accessible approach to delivering visual information from the remote area is using cameras to transmit a video stream from the environment. However, such systems are sensitive to the camera resolution, limited viewpoints, and cluttered environment bringing additional mental demands to the human operator. The paper proposes a novel system of teleoperation based on an augmented virtual environment (VE). The region-based convolutional neural network (R-CNN) is applied to detect the laboratory instrument and estimate its position in the remote environment to display further its digital twin in the VE, which is necessary for dexterous telemanipulation. The experimental results revealed that the developed system allows users to operate the robot smoother, which leads to a decrease in task execution time when manipulating test tubes. In addition, the participants evaluated the developed system as less mentally demanding (by 11%) and requiring less effort (by 16%) to accomplish the task than the camera-based teleoperation approach and highly assessed their performance in the augmented VE. The proposed technology can be potentially applied for conducting laboratory tests in remote areas when operating with infectious and poisonous reagents.

When adapting Vision Language Action (VLA) models to downstream tasks, multiple rounds of post-training are often required to progressively address policy weaknesses. In this report, we focus on maximizing human efficiency during this iterative process, measured by policy improvement and task throughput per unit of human labor and time. We propose HELP, a Human-Efficient Large-scale robot Post-training pipeline in which two specialized operators supervise twelve robots concurrently. A trained Teleoperator provides high-value remote interventions and recovery demonstrations, while a Floor Operator monitors the robot fleet, triggers takeovers, and performs physical resets. This role specialization improves human efficiency by reducing task switching, lowering operator training costs, and expanding robot interaction coverage. Beyond increasing rollout volume, concurrent supervision also broadens the range of policy behaviors observed by the human team, making recurring failure modes easier to identify and enabling more targeted takeovers, resets, and recovery demonstrations. To efficiently utilize the large and mixed-quality rollout data, HELP incorporates \vlac, an automatic rollout segmentation critic specifically designed for this setting. It separates autonomous trajectories into progress-making, idle, failure-inducing, and recovery segments. Useful rollout segments are retained and combined with Human-in-the-Loop data for the next post-training round. Across four real-world manipulation tasks, HELP achieves 80\%--95\% success rates and improves task throughput by 1.7times--4.2times over the base model. Under matched HITL recovery budgets, VLAC-CUT further amplifies throughput gains by 1.20times--3.43times and success-rate gains by 1.50times--3.00times over HITL-only updates.

Teleoperating humanoid robots in a whole-body manner marks a fundamental step toward developing general-purpose robotic intelligence, with human motion providing an ideal interface for controlling all degrees of freedom. Yet, most current humanoid teleoperation systems fall short of enabling coordinated whole-body behavior, typically limiting themselves to isolated locomotion or manipulation tasks. We present the Teleoperated Whole-Body Imitation System (TWIST), a system for humanoid teleoperation through whole-body motion imitation. We first generate reference motion clips by retargeting human motion capture data to the humanoid robot. We then develop a robust, adaptive, and responsive whole-body controller using a combination of reinforcement learning and behavior cloning (RL+BC). Through systematic analysis, we demonstrate how incorporating privileged future motion frames and real-world motion capture (MoCap) data improves tracking accuracy. TWIST enables real-world humanoid robots to achieve unprecedented, versatile, and coordinated whole-body motor skills--spanning whole-body manipulation, legged manipulation, locomotion, and expressive movement--using a single unified neural network controller. Our project website: https://humanoid-teleop.github.io

Existing teleoperation systems are often tailored to specific robot hardware and task domains, limiting their scalability and adaptability. We present ModPack, a modular and extensible teleoperation system designed to support diverse robot embodiments and task requirements within a unified framework. At the core of ModPack is a self-contained wearable "backpack" that integrates onboard computation, power, communication, and data storage. Built on top of this shared interface, the system supports plug-and-play capability modules including joint-level teleoperation with haptic feedback, mobile manipulation, and active perception. Experiments across two distinct robot platforms and real-world mobile manipulation tasks demonstrate that ModPack provides a flexible and reusable framework for data collection and policy learning. To support future research, we open-source the complete hardware design and software stack. Project website: https://modpack-robotics.github.io/

Replicating human--level dexterity remains a fundamental robotics challenge, requiring integrated solutions from mechatronic design to the control of high degree--of--freedom (DoF) robotic hands. While imitation learning shows promise in transferring human dexterity to robots, the efficacy of trained policies relies on the quality of human demonstration data. We bridge this gap with a hand--arm teleoperation system featuring: (1) a 20--DoF linkage--driven anthropomorphic robotic hand for biomimetic dexterity, and (2) an optimization--based motion retargeting for real--time, high--fidelity reproduction of intricate human hand motions and seamless hand--arm coordination. We validate the system via extensive empirical evaluations, including dexterous in-hand manipulation tasks and a long--horizon task requiring the organization of a cluttered makeup table randomly populated with nine objects. Experimental results demonstrate its intuitive teleoperation interface with real--time control and the ability to generate high--quality demonstration data. Please refer to the accompanying video for further details.

Exploiting the promise of recent advances in imitation learning for mobile manipulation will require the collection of large numbers of human-guided demonstrations. This paper proposes an open-source design for an inexpensive, robust, and flexible mobile manipulator that can support arbitrary arms, enabling a wide range of real-world household mobile manipulation tasks. Crucially, our design uses powered casters to enable the mobile base to be fully holonomic, able to control all planar degrees of freedom independently and simultaneously. This feature makes the base more maneuverable and simplifies many mobile manipulation tasks, eliminating the kinematic constraints that create complex and time-consuming motions in nonholonomic bases. We equip our robot with an intuitive mobile phone teleoperation interface to enable easy data acquisition for imitation learning. In our experiments, we use this interface to collect data and show that the resulting learned policies can successfully perform a variety of common household mobile manipulation tasks.

Telerobotics is a key foundation in autonomous Industrial Cyber-Physical Systems (ICPS), enabling remote operations across various domains. However, conventional cloud-based telerobotics suffers from latency, reliability, scalability, and resilience issues, hindering real-time performance in critical applications. Cloud-Fog Telerobotics (CFTel) builds on the Cloud-Fog Automation (CFA) paradigm to address these limitations by leveraging a distributed Cloud-Edge-Robotics computing architecture, enabling deterministic connectivity, deterministic connected intelligence, and deterministic networked computing. This paper synthesizes recent advancements in CFTel, aiming to highlight its role in facilitating scalable, low-latency, autonomous, and AI-driven telerobotics. We analyze architectural frameworks and technologies that enable them, including 5G Ultra-Reliable Low-Latency Communication, Edge Intelligence, Embodied AI, and Digital Twins. The study demonstrates that CFTel has the potential to enhance real-time control, scalability, and autonomy while supporting service-oriented solutions. We also discuss practical challenges, including latency constraints, cybersecurity risks, interoperability issues, and standardization efforts. This work serves as a foundational reference for researchers, stakeholders, and industry practitioners in future telerobotics research.

Large-scale data has driven breakthroughs in robotics, from language models to vision-language-action models in bimanual manipulation. However, humanoid robotics lacks equally effective data collection frameworks. Existing humanoid teleoperation systems either use decoupled control or depend on expensive motion capture setups. We introduce TWIST2, a portable, mocap-free humanoid teleoperation and data collection system that preserves full whole-body control while advancing scalability. Our system leverages PICO4U VR for obtaining real-time whole-body human motions, with a custom 2-DoF robot neck (cost around $250) for egocentric vision, enabling holistic human-to-humanoid control. We demonstrate long-horizon dexterous and mobile humanoid skills and we can collect 100 demonstrations in 15 minutes with an almost 100% success rate. Building on this pipeline, we propose a hierarchical visuomotor policy framework that autonomously controls the full humanoid body based on egocentric vision. Our visuomotor policy successfully demonstrates whole-body dexterous manipulation and dynamic kicking tasks. The entire system is fully reproducible and open-sourced at https://yanjieze.com/TWIST2 . Our collected dataset is also open-sourced at https://twist-data.github.io .

Expert demonstrations are widely assumed to be the gold standard for robot imitation learning. Yet for fine-grained manipulation such as insertion, stacking, and alignment, we uncover a counterintuitive failure mode: fluent demonstrations can be poor teachers. A skilled teleoperator compresses the decisive moments of alignment and recovery into a brief temporal window, leaving the policy flooded with redundant free-space motion and starved of supervision exactly where precision determines success. We address this bottleneck at two levels. At the data level, slowing down near alignment and resampling critical segments both help, yet the gain comes mainly from broadening the coverage of recovery states the policy must learn, not from reweighting frames it already has. Such data-side fixes, however, leave the policy's per-frame view untouched: a single image still maps directly to an action, and the local motion that governs correction stays implicit. We therefore turn to the representation level and introduce STAIR (Spatio-Temporal feature As an Interface for Robot learning), a compact dynamic feature that bridges the vision-language model and the action expert, distilling the short-horizon motion already recorded in each trajectory into dense, motion-aware supervision. Trained on fluent data alone, STAIR recovers most of the deliberate-demonstration gain (50.0 to 62.2% overall, approaching the 64.4% of deliberate demonstrations). These results call for a more pedagogical view of robot data, optimized for machine learnability rather than human efficiency alone.

Humanoid teleoperation plays a vital role in demonstrating and collecting data for complex humanoid-scene interactions. However, current teleoperation systems face critical limitations: they decouple upper- and lower-body control to maintain stability, restricting natural coordination, and operate open-loop without real-time position feedback, leading to accumulated drift. The fundamental challenge is achieving precise, coordinated whole-body teleoperation over extended durations while maintaining accurate global positioning. Here we show that an MoE-based teleoperation system, CLONE, with closed-loop error correction enables unprecedented whole-body teleoperation fidelity, maintaining minimal positional drift over long-range trajectories using only head and hand tracking from an MR headset. Unlike previous methods that either sacrifice coordination for stability or suffer from unbounded drift, CLONE learns diverse motion skills while preventing tracking error accumulation through real-time feedback, enabling complex coordinated movements such as ``picking up objects from the ground.'' These results establish a new milestone for whole-body humanoid teleoperation for long-horizon humanoid-scene interaction tasks.

Teleoperation systems are essential for efficiently collecting diverse and high-quality robot demonstration data, especially for complex, contact-rich tasks. However, current teleoperation platforms typically lack integrated force feedback, cross-embodiment generalization, and portable, user-friendly designs, limiting their practical deployment. To address these limitations, we introduce ACE-F, a cross embodiment foldable teleoperation system with integrated force feedback. Our approach leverages inverse kinematics (IK) combined with a carefully designed human-robot interface (HRI), enabling users to capture precise and high-quality demonstrations effortlessly. We further propose a generalized soft-controller pipeline integrating PD control and inverse dynamics to ensure robot safety and precise motion control across diverse robotic embodiments. Critically, to achieve cross-embodiment generalization of force feedback without additional sensors, we innovatively interpret end-effector positional deviations as virtual force signals, which enhance data collection and enable applications in imitation learning. Extensive teleoperation experiments confirm that ACE-F significantly simplifies the control of various robot embodiments, making dexterous manipulation tasks as intuitive as operating a computer mouse. The system is open-sourced at: https://acefoldable.github.io/

Networked teleoperation with haptic feedback is a prime example for the emerging Tactile Internet, which requires a careful orchestration of haptic communication and control. One major challenge in this context is how to maximize the user's quality-of-experience (QoE) while ensuring at the same time the stability of the global control loop in the presence of communication delay. In this paper, we propose a dynamic control scheme switching strategy for teleoperation systems, which maximizes the QoE for time-varying communication delay. In order to validate the feasibility of the proposed approach, we perform a dedicated case study for a virtual teleoperation environment consisting of a one-dimensional spring-damper system, and conduct extensive subjective tests under various delay conditions for two control schemes: (1) teleoperation with the time-domain passivity approach (TDPA), which is highly delay-sensitive but supports highly dynamic interaction between the operator and a potentially quickly changing remote environment; (2) model-mediated teleoperation (MMT), which is tolerable to relatively larger communication delays, but unsuitable for quickly changing, highly dynamic remote environments. For both schemes, we use recently proposed extensions, which incorporate perceptual data reduction to reduce the required packet rate between the operator and the teleoperator. One key contribution of this paper lies in the exploration of the intrinsic relationship among QoE, communication delay and the control schemes which provides a fundamental guidance, not only to this research, but also to the future joint optimization of communication and control for time-delayed teleoperation systems.

Achieving human-like dexterous manipulation remains a major challenge for general-purpose robots. While Vision-Language-Action (VLA) models show potential in learning skills from demonstrations, their scalability is limited by scarce high-quality training data. Existing data collection methods face inherent constraints: manual teleoperation overloads human operators, while automated planning often produces unnatural motions. We propose a Shared Autonomy framework that divides control between macro and micro motions. A human operator guides the robot's arm pose through intuitive VR teleoperation, while an autonomous DexGrasp-VLA policy handles fine-grained hand control using real-time tactile and visual feedback. This division significantly reduces cognitive load and enables efficient collection of high-quality coordinated arm-hand demonstrations. Using this data, we train an end-to-end VLA policy enhanced with our novel Arm-Hand Feature Enhancement module, which captures both distinct and shared representations of macro and micro movements for more natural coordination. Our Corrective Teleoperation system enables continuous policy improvement through human-in-the-loop failure recovery. Experiments demonstrate that our framework generates high-quality data with minimal manpower and achieves a 90% success rate across diverse objects, including unseen instances. Comprehensive evaluations validate the system's effectiveness in developing dexterous manipulation capabilities.

Robotic manipulators are increasingly used to assist individuals with mobility impairments in object retrieval. However, the predominant joystick-based control interfaces can be challenging due to high precision requirements and unintuitive reference frames. Recent advances in human-robot interaction have explored alternative modalities, yet many solutions still rely on external screens or restrictive control schemes, limiting their intuitiveness and accessibility. To address these challenges, we present an egocentric, gaze-guided robotic manipulation interface that leverages a wearable Mixed Reality (MR) headset. Our system enables users to interact seamlessly with real-world objects using natural gaze fixation from a first-person perspective, while providing augmented visual cues to confirm intent and leveraging a pretrained vision model and robotic arm for intent recognition and object manipulation. Experimental results demonstrate that our approach significantly improves manipulation accuracy, reduces system latency, and achieves single-pass intention and object recognition accuracy greater than 88% across multiple real-world scenarios. These results demonstrate the system's effectiveness in enhancing intuitiveness and accessibility, underscoring its practical significance for assistive robotics applications.

Vision-Language-Action (VLA) models have recently become a central direction in embodied AI, but current systems are restricted to either dual-gripper control or single-arm dexterous hand manipulation. While low-dimensional gripper control can often be handled with simpler methods, high-dimensional dexterous hand control benefits greatly from full end-to-end VLA learning. In this work, we introduce Dexora, the first open-source VLA system that natively targets dual-arm, dual-hand high-DoF manipulation. We design a hybrid teleoperation pipeline that decouples gross arm kinematics (captured with a custom exoskeleton backpack) from fine finger motion (markerless hand tracking via Apple Vision Pro), and that drives both a physical dual-arm dual-hand platform and an identical MuJoCo digital twin. Using that interface, we assemble a large training corpus: an embodiment-matched synthetic corpus (100K simulated trajectories, 6.5M frames) and a real-world dataset of 10K teleoperated episodes (2.92M frames). To mitigate noisy teleoperation demonstrations, we propose a data-quality-aware training recipe: an offline discriminator provides clip-level weights for diffusion-transformer policy training, down-weighting low-quality demonstrations. Empirically, Dexora outperforms competitive VLA baselines on both basic and dexterous benchmarks (e.g., average dexterous success 66.7% vs. 51.7%), attains 90% success on basic tasks, and shows robust out-of-distribution and cross-embodiment generalization. Ablations confirm the importance of real data and the discriminator for dexterity.

Embodied foundation models are expected to benefit from data scaling like large language models, but face a much tighter data bottleneck. Teleoperated real-robot trajectories remain the dominant pretraining source due to their precise action supervision and embodiment alignment, yet their scalability is limited by high collection cost, acquisition difficulty, and low behavioral and environmental diversity. These limitations have sparked interest in egocentric human video as a scalable, substantially lower-cost, and more diverse alternative for embodied model pretraining. However, its effectiveness compared to teleoperated real-robot data remains underexplored. To address this question, we conduct a systematic study comparing egocentric human video and teleoperated real-robot trajectories as pretraining data sources for embodied foundation models, under fixed post-training and validation protocols. Surprisingly, we find that egocentric data, when processed through a carefully designed filtering and labeling pipeline, is not merely a viable substitute for model pretraining but can lead to superior performance. With the same amount of pretraining data, models pretrained on egocentric data achieve a 24% lower validation loss on real-robot action prediction, as well as 52.5% and 90% higher success rates on in-distribution and out-of-distribution real-robot task execution, respectively. This finding verifies a scalable paradigm for embodied foundation models: pretrain on egocentric human video to learn diverse world representations, then adapt with a small amount of labeled real-robot data for action-space alignment. We hope this study encourages broader exploration of egocentric data and offers guidance for data quality assessment before costly robot data collection.

Imitation Learning has empowered recent advances in learning robotic manipulation tasks by addressing shortcomings of Reinforcement Learning such as exploration and reward specification. However, research in this area has been limited to modest-sized datasets due to the difficulty of collecting large quantities of task demonstrations through existing mechanisms. This work introduces RoboTurk to address this challenge. RoboTurk is a crowdsourcing platform for high quality 6-DoF trajectory based teleoperation through the use of widely available mobile devices (e.g. iPhone). We evaluate RoboTurk on three manipulation tasks of varying timescales (15-120s) and observe that our user interface is statistically similar to special purpose hardware such as virtual reality controllers in terms of task completion times. Furthermore, we observe that poor network conditions, such as low bandwidth and high delay links, do not substantially affect the remote users' ability to perform task demonstrations successfully on RoboTurk. Lastly, we demonstrate the efficacy of RoboTurk through the collection of a pilot dataset; using RoboTurk, we collected 137.5 hours of manipulation data from remote workers, amounting to over 2200 successful task demonstrations in 22 hours of total system usage. We show that the data obtained through RoboTurk enables policy learning on multi-step manipulation tasks with sparse rewards and that using larger quantities of demonstrations during policy learning provides benefits in terms of both learning consistency and final performance. For additional results, videos, and to download our pilot dataset, visit http://roboturk.stanford.edu/{roboturk.stanford.edu}

Robotic manipulation is essential for the widespread adoption of robots in industrial and home settings and has long been a focus within the robotics community. Advances in artificial intelligence have introduced promising learning-based methods to address this challenge, with imitation learning emerging as particularly effective. However, efficiently acquiring high-quality demonstrations remains a challenge. In this work, we introduce an immersive VR-based teleoperation setup designed to collect demonstrations from a remote human user. We also propose an imitation learning framework called Haptic Action Chunking with Transformers (Haptic-ACT). To evaluate the platform, we conducted a pick-and-place task and collected 50 demonstration episodes. Results indicate that the immersive VR platform significantly reduces demonstrator fingertip forces compared to systems without haptic feedback, enabling more delicate manipulation. Additionally, evaluations of the Haptic-ACT framework in both the MuJoCo simulator and on a real robot demonstrate its effectiveness in teaching robots more compliant manipulation compared to the original ACT. Additional materials are available at https://sites.google.com/view/hapticact.

Imitation learning provides a promising approach to dexterous hand manipulation, but its effectiveness is limited by the lack of large-scale, high-fidelity data. Existing data-collection pipelines suffer from inaccurate motion retargeting, low data-collection efficiency, and missing high-resolution fingertip tactile sensing. We address this gap with MILE, a mechanically isomorphic teleoperation and data-collection system co-designed from human hand to exoskeleton to robotic hand. The exoskeleton is anthropometrically derived from the human hand, and the robotic hand preserves one-to-one joint-position isomorphism, eliminating nonlinear retargeting and enabling precise, natural control. The exoskeleton achieves a multi-joint mean absolute angular error below one degree, while the robotic hand integrates compact fingertip visuotactile modules that provide high-resolution tactile observations. Built on this retargeting-free interface, we teleoperate complex, contact-rich in-hand manipulation and efficiently collect a multimodal dataset comprising high-resolution fingertip visuotactile signals, RGB-D images, and joint positions. The teleoperation pipeline achieves a mean success rate improvement of 64%. Incorporating fingertip tactile observations further increases the success rate by an average of 25% over the vision-only baseline, validating the fidelity and utility of the dataset. Further details are available at: https://sites.google.com/view/mile-system.

Teaching robots dexterous manipulation skills, such as tool use, presents a significant challenge. Current approaches can be broadly categorized into two strategies: human teleoperation (for imitation learning) and sim-to-real reinforcement learning. The first approach is difficult as it is hard for humans to produce safe and dexterous motions on a different embodiment without touch feedback. The second RL-based approach struggles with the domain gap and involves highly task-specific reward engineering on complex tasks. Our key insight is that RL is effective at learning low-level motion primitives, while humans excel at providing coarse motion commands for complex, long-horizon tasks. Therefore, the optimal solution might be a combination of both approaches. In this paper, we introduce DexterityGen (DexGen), which uses RL to pretrain large-scale dexterous motion primitives, such as in-hand rotation or translation. We then leverage this learned dataset to train a dexterous foundational controller. In the real world, we use human teleoperation as a prompt to the controller to produce highly dexterous behavior. We evaluate the effectiveness of DexGen in both simulation and real world, demonstrating that it is a general-purpose controller that can realize input dexterous manipulation commands and significantly improves stability by 10-100x measured as duration of holding objects across diverse tasks. Notably, with DexGen we demonstrate unprecedented dexterous skills including diverse object reorientation and dexterous tool use such as pen, syringe, and screwdriver for the first time.

Dexterous manipulation remains a critical bottleneck in industrial automation; tasks such as cable routing, connector insertion, and precision assembly still rely heavily on manual labor despite decades of robotics research. This work presents a progression from classical, modular robotics pipelines toward an end-to-end multimodal imitation-learning framework for industrial dexterous manipulation. As a part of this work, we introduce three key contributions: a set of Industrial Dexterity Benchmark (IDB) boards aimed to mimic datacenter cable management, automotive cable harnesses, and gearbox assembly tasks; a scalable imitation learning framework (DAG-ROS); and a multimodal diffusion-based policy framework (AG-iDP3) that creates models fusing RGB images, point clouds, joint positions, and wrist-frame wrench data. Focusing on the datacenter cable manipulation board, we evaluate the performance of a task involving cleaning a single cable over variations of an end-to-end AI policy using 48 trials per configuration. The best performing configuration, a multimodal expansion Diffusion Policy (DP), includes a multi-view RGB image source passed through an R3M encoder and reaches a 78% grasp and insert combined task success rate. This performance marks a significant improvement over the 36% observed from the single-camera RGB DP baseline. Each of the tested configurations requires only approximately 100 teleoperated demonstrations per task phase. These results indicate that the correct learned policy can outperform classical vision and control robotic methods in robustness, generalization, and deployment efficiency, justifying a shift toward scalable robotic automation for high up-time industrial environments.

In this work, we present a PICO-based robot remote operating framework that enables low-cost, real-time acquisition of hand motion and pose data, outperforming mainstream visual tracking and motion capture solutions in terms of cost-effectiveness. The framework is natively compatible with the RealMirror ecosystem, offering ready-to-use functionality for stable and precise robotic trajectory recording within the Isaac simulation environment, thereby facilitating the construction of Vision-Language-Action (VLA) datasets. Additionally, the system supports real-time teleoperation of a variety of end-effector-equipped robots, including dexterous hands and robotic grippers. This work aims to lower the technical barriers in the study of upper-limb robotic manipulation, thereby accelerating advancements in VLA-related research.

Dexterous hand teleoperation plays a pivotal role in enabling robots to achieve human-level manipulation dexterity. However, current teleoperation systems often rely on expensive equipment and lack multi-modal sensory feedback, restricting human operators' ability to perceive object properties and perform complex manipulation tasks. To address these limitations, we present DOGlove, a low-cost, precise, and haptic force feedback glove system for teleoperation and manipulation. DoGlove can be assembled in hours at a cost under 600 USD. It features a customized joint structure for 21-DoF motion capture, a compact cable-driven torque transmission mechanism for 5-DoF multidirectional force feedback, and a linear resonate actuator for 5-DoF fingertip haptic feedback. Leveraging action and haptic force retargeting, DOGlove enables precise and immersive teleoperation of dexterous robotic hands, achieving high success rates in complex, contact-rich tasks. We further evaluate DOGlove in scenarios without visual feedback, demonstrating the critical role of haptic force feedback in task performance. In addition, we utilize the collected demonstrations to train imitation learning policies, highlighting the potential and effectiveness of DOGlove. DOGlove's hardware and software system will be fully open-sourced at https://do-glove.github.io/.

Imitation learning has demonstrated significant potential in performing high-precision manipulation tasks using visual feedback. However, it is common practice in imitation learning for cameras to be fixed in place, resulting in issues like occlusion and limited field of view. Furthermore, cameras are often placed in broad, general locations, without an effective viewpoint specific to the robot's task. In this work, we investigate the utility of active vision (AV) for imitation learning and manipulation, in which, in addition to the manipulation policy, the robot learns an AV policy from human demonstrations to dynamically change the robot's camera viewpoint to obtain better information about its environment and the given task. We introduce AV-ALOHA, a new bimanual teleoperation robot system with AV, an extension of the ALOHA 2 robot system, incorporating an additional 7-DoF robot arm that only carries a stereo camera and is solely tasked with finding the best viewpoint. This camera streams stereo video to an operator wearing a virtual reality (VR) headset, allowing the operator to control the camera pose using head and body movements. The system provides an immersive teleoperation experience, with bimanual first-person control, enabling the operator to dynamically explore and search the scene and simultaneously interact with the environment. We conduct imitation learning experiments of our system both in real-world and in simulation, across a variety of tasks that emphasize viewpoint planning. Our results demonstrate the effectiveness of human-guided AV for imitation learning, showing significant improvements over fixed cameras in tasks with limited visibility. Project website: https://soltanilara.github.io/av-aloha/

Advances in learning-based robotic manipulation, such as Vision-Language-Action (VLA) models and Video Action Models (VAMs), heavily rely on high-quality teleoperation data. Their capabilities are strictly upper-bounded by the quality of the underlying human demonstrations. Current gradient-based retargeting algorithms often converge to different local minima, resulting in jitter that affects data quality and teleoperation experience. To address this, we introduce the Sampling-Based Retargeter (SBR), a novel gradient-free retargeting method drawn from the rich literature of sampling-based control and explicitly designed for low-jitter, real-time kinematic retargeting. We evaluate SBR both in simulation and through a rigorous real-world user study involving 18 participants performing 3 complex manipulation tasks. Compared to gradient-based baselines, SBR achieved the highest overall task success rate (54.1%) while significantly reducing operator cognitive fatigue, recording the lowest NASA-TLX workload score (36.4 out of 100). Ultimately, we establish SBR as a highly effective, intuitive retargeter for dexterous manipulation, providing the community with a rigorous benchmarking methodology to guide future retargeting research.

We describe a mobile manipulation hardware and software system capable of autonomously performing complex human-level tasks in real homes, after being taught the task with a single demonstration from a person in virtual reality. This is enabled by a highly capable mobile manipulation robot, whole-body task space hybrid position/force control, teaching of parameterized primitives linked to a robust learned dense visual embeddings representation of the scene, and a task graph of the taught behaviors. We demonstrate the robustness of the approach by presenting results for performing a variety of tasks, under different environmental conditions, in multiple real homes. Our approach achieves 85% overall success rate on three tasks that consist of an average of 45 behaviors each.

Human demonstrations offer a scalable data source for dexterous manipulation, but transferring them to robot actions remains challenging due to the embodiment gap. Today's retargeting is mostly kinematic, yet manipulation is decided by force, which governs how the hand interacts with the object and how the object moves. In this paper, we present ReForce, a Force-aware Retargeting method that turns human motion and forces into robot actions that reproduce the intended contact. ReForce predicts a residual on the kinematically retargeted action to reach the desired force, using a general force tracker trained on large-scale simulation interactions. It supports both online force-aware teleoperation and offline data translation. In simulation and on real hardware, ReForce achieves lower force-tracking error and stronger multi-finger contact engagement on contact-rich tasks such as paper-cup grasping and tongs manipulation.

Teleoperation remains the default way to collect robot demonstrations, but every episode costs robot and operator time, and every new task starts from scratch. We ask whether a coding agent can take over the teleoperator's job. In our DataFarm, the agent receives a data request and one calibration episode of the robot in the target scene and rebuilds the task in simulation: it writes the scene, an expert controller, and a success judge. The simulator supplies exact actions, and a video model conditioned on real images renders each rollout as photographic video, generating all camera views together consistently. The output is real-ready data: synchronized camera views labelled with the robot's actions, on which a policy can be trained directly and deployed on the real robot. Independent judges certify the expert and every rendered episode before admission. On five real-robot tasks, policies trained only on farm data match policies trained on as many teleoperated episodes (93 vs. 84 successes in 100 trials), and under an unseen tablecloth and coloured light they keep 87 successes where the teleoperation-trained policies fall to 46. Adapting a task is fully automatic and costs \21 of API usage on average, paid once per task, plus 5 for a render contract; every further episode costs \0.80 on average for simulation, rendering, and review, with no robot or operator. One hour of three-view data for a task costs 107 on average, these costs included, slightly below a quote of \117 for teleoperation in China and below 290 in labour alone in North America.

Dexterous manipulation is a critical aspect of human capability, enabling interaction with a wide variety of objects. Recent advancements in learning from human demonstrations and teleoperation have enabled progress for robots in such ability. However, these approaches either require complex data collection such as costly human effort for eye-robot contact, or suffer from poor generalization when faced with novel scenarios. To solve both challenges, we propose a framework, DexH2R, that combines human hand motion retargeting with a task-oriented residual action policy, improving task performance by bridging the embodiment gap between human and robotic dexterous hands. Specifically, DexH2R learns the residual policy directly from retargeted primitive actions and task-oriented rewards, eliminating the need for labor-intensive teleoperation systems. Moreover, we incorporate test-time guidance for novel scenarios by taking in desired trajectories of human hands and objects, allowing the dexterous hand to acquire new skills with high generalizability. Extensive experiments in both simulation and real-world environments demonstrate the effectiveness of our work, outperforming prior state-of-the-arts by 40% across various settings.

Scaling robot learning requires massive, diverse trajectory data, yet collection is currently bottlenecked by physical teleoperation, where every demonstration binds operator time to specific hardware and workspaces. We introduce digital teleoperation, a paradigm that decouples data collection from physical constraints by replacing the real robot with a generative world model. In this framework, an operator's hand-pose stream drives a robot-centric generative world model to synthesize high-fidelity egocentric videos from a single reference image. The recorded pose stream serves as an embodiment-agnostic action label transferable to any target robot via standard retargeting, yielding complete state-action trajectories for imitation learning independent of physical hardware. We instantiate this paradigm in RynnWorld-Teleop, a system that integrates depth-aware skeletal conditioning, progressive human-to-robot training on a video Diffusion Transformer, and streaming autoregressive distillation. This pipeline compresses the generative process into a single-pass inference, enabling 40+ FPS, real-time interactive generation on a single H100 GPU. Policies trained exclusively on RynnWorld-Teleop-generated data achieve effective zero-shot Sim2Real transfer across dexterous and diverse bimanual tasks. Moreover, augmenting real-world datasets with our digitally teleoperated data consistently improves success rates, demonstrating that RynnWorld-Teleop serves as a high-fidelity, scalable data engine for the next generation of robotic agents.

Many contact-rich tasks humans perform, such as box pickup or rolling dough, rely on force feedback for reliable execution. However, this force information, which is readily available in most robot arms, is not commonly used in teleoperation and policy learning. Consequently, robot behavior is often limited to quasi-static kinematic tasks that do not require intricate force-feedback. In this paper, we first present a low-cost, intuitive, bilateral teleoperation setup that relays external forces of the follower arm back to the teacher arm, facilitating data collection for complex, contact-rich tasks. We then introduce FACTR, a policy learning method that employs a curriculum which corrupts the visual input with decreasing intensity throughout training. The curriculum prevents our transformer-based policy from over-fitting to the visual input and guides the policy to properly attend to the force modality. We demonstrate that by fully utilizing the force information, our method significantly improves generalization to unseen objects by 43\% compared to baseline approaches without a curriculum. Video results, codebases, and instructions at https://jasonjzliu.com/factr/

Vision-language-action (VLA) models across robot embodiments require high-quality observation--action supervision to learn deployable action distributions, yet scaling such robot data remains difficult, especially for high-DoF humanoids. Teleoperation provides controller-aligned supervision, while human egocentric videos capture diverse bimanual manipulation but do not directly provide executable robot actions. We introduce Human-as-Humanoid, a human-to-humanoid supervision framework that enables near-real-time human-centric action generation, making human demonstrations usable for high-DoF humanoid VLA training by jointly aligning the robot embodiment, the sensing setup, and the action-label interface. Built on PrimeU, a human-aligned 60-DoF upper-body humanoid, Human-as-Humanoid uses synchronized ego-exo videos to pair deployment-aligned egocentric observations with exocentric motion recovery, retargets the recovered human motion through staged Inverse Kinematics (IK) into controller-aligned 60-DoF action chunks, and trains the VLA model with Forward Kinematics (FK)-aware supervision to preserve wrist and fingertip task-space geometry. This converts large-scale human demonstrations from visual observations into executable observation--action supervision for the target humanoid. Experiments validate the conversion chain at the motion-recovery, robot-action-space, and real-robot deployment levels. Human-as-Humanoid yields a 4.8--7.2x raw demonstration-throughput gain over humanoid teleoperation in our data-collection analysis, and on several downstream tasks, policies post-trained only with the converted human labels generalize to real-robot deployment without target-task robot demonstrations. The official project website is available at https://zgc-embodyai.github.io/Human-as-Humanoid.

This paper introduces ByteWrist, a novel highly-flexible and anthropomorphic parallel wrist for robotic manipulation. ByteWrist addresses the critical limitations of existing serial and parallel wrists in narrow-space operations through a compact three-stage parallel drive mechanism integrated with arc-shaped end linkages. The design achieves precise RPY (Roll-Pitch-Yaw) motion while maintaining exceptional compactness, making it particularly suitable for complex unstructured environments such as home services, medical assistance, and precision assembly. The key innovations include: (1) a nested three-stage motor-driven linkages that minimize volume while enabling independent multi-DOF control, (2) arc-shaped end linkages that optimize force transmission and expand motion range, and (3) a central supporting ball functioning as a spherical joint that enhances structural stiffness without compromising flexibility. Meanwhile, we present comprehensive kinematic modeling including forward / inverse kinematics and a numerical Jacobian solution for precise control. Empirically, we observe ByteWrist demonstrates strong performance in narrow-space maneuverability and dual-arm cooperative manipulation tasks, outperforming Kinova-based systems. Results indicate significant improvements in compactness, efficiency, and stiffness compared to traditional designs, establishing ByteWrist as a promising solution for next-generation robotic manipulation in constrained environments.

We introduce ABC, a fully open-source stack for manipulation with behavior cloning. At its core is ABC-130K: the largest open-source teleoperation dataset to date, featuring 3,500 hours of data spanning over 130K episodes across 195 diverse tasks. Furthermore, we open-source our accessible hardware setup, training infrastructure, and simulation pipeline. We also release 400 hours of sim-teleop data and provide a co-training recipe that produces correlated simulation and real-world evaluation, offering a reliable proxy for ablating model-design and training decisions before costly real-world evaluation. We explore various training recipes and compare common architectural choices for Diffusion Transformers (DiT) and Vision-Language-Action (VLA) models, grounding our findings in real-world evaluations. The resulting policies successfully execute dexterous tasks such as box folding and extracting credit cards from wallets. By providing a reproducible toolkit, we aim to place researchers on an equal footing, establishing the necessary foundation to learn the ABCs of Behavior Cloning together as a community.

We explore whether surgical manipulation tasks can be learned on the da Vinci robot via imitation learning. However, the da Vinci system presents unique challenges which hinder straight-forward implementation of imitation learning. Notably, its forward kinematics is inconsistent due to imprecise joint measurements, and naively training a policy using such approximate kinematics data often leads to task failure. To overcome this limitation, we introduce a relative action formulation which enables successful policy training and deployment using its approximate kinematics data. A promising outcome of this approach is that the large repository of clinical data, which contains approximate kinematics, may be directly utilized for robot learning without further corrections. We demonstrate our findings through successful execution of three fundamental surgical tasks, including tissue manipulation, needle handling, and knot-tying.

This paper describes the Inria team's integrated robotics system used in the 1st euROBIN coopetition, during which service robots performed voice-activated household tasks in a kitchen setting.The team developed a modified Tiago++ platform that leverages a whole-body control stack for autonomous and teleoperated modes, and an LLM-based pipeline for instruction understanding and task planning. The key contributions (opens-sourced) are the integration of these components and the design of custom teleoperation devices, addressing practical challenges in the deployment of service robots.

Eye-in-hand cameras have shown promise in enabling greater sample efficiency and generalization in vision-based robotic manipulation. However, for robotic imitation, it is still expensive to have a human teleoperator collect large amounts of expert demonstrations with a real robot. Videos of humans performing tasks, on the other hand, are much cheaper to collect since they eliminate the need for expertise in robotic teleoperation and can be quickly captured in a wide range of scenarios. Therefore, human video demonstrations are a promising data source for learning generalizable robotic manipulation policies at scale. In this work, we augment narrow robotic imitation datasets with broad unlabeled human video demonstrations to greatly enhance the generalization of eye-in-hand visuomotor policies. Although a clear visual domain gap exists between human and robot data, our framework does not need to employ any explicit domain adaptation method, as we leverage the partial observability of eye-in-hand cameras as well as a simple fixed image masking scheme. On a suite of eight real-world tasks involving both 3-DoF and 6-DoF robot arm control, our method improves the success rates of eye-in-hand manipulation policies by 58% (absolute) on average, enabling robots to generalize to both new environment configurations and new tasks that are unseen in the robot demonstration data. See video results at https://giving-robots-a-hand.github.io/ .

Generalizable humanoid loco-manipulation poses significant challenges, requiring coordinated whole-body control and precise, contact-rich object manipulation. To address this, this paper introduces HOMIE, a semi-autonomous teleoperation system that combines a reinforcement learning policy for body control mapped to a pedal, an isomorphic exoskeleton arm for arm control, and motion-sensing gloves for hand control, forming a unified cockpit to freely operate humanoids and establish a data flywheel. The policy incorporates novel designs, including an upper-body pose curriculum, a height-tracking reward, and symmetry utilization. These features enable the system to perform walking and squatting to specific heights while seamlessly adapting to arbitrary upper-body poses. The exoskeleton, by eliminating the reliance on inverse dynamics, delivers faster and more precise arm control. The gloves utilize Hall sensors instead of servos, allowing even compact devices to achieve 15 or more degrees of freedom and freely adapt to any model of dexterous hands. Compared to previous teleoperation systems, HOMIE stands out for its exceptional efficiency, completing tasks in half the time; its expanded working range, allowing users to freely reach high and low areas as well as interact with any objects; and its affordability, with a price of just $500. The system is fully open-source, demos and code can be found in our https://homietele.github.io/.

Robust embodied robots should be able to recover from failures and retry tasks in order to operate reliably in unstructured and noisy real-world environments. Achieving this capability requires training policies on data that captures recovery behaviors. However, collecting such data through robot teleoperation is difficult to scale, as it is time-consuming to induce diverse failure states, perform corrective actions, and reset the environment. This challenge is further exacerbated by the high diversity of failure modes, which demands substantially more recovery data than success demonstrations. In this work, we show that egocentric human data capturing failure recovery processes provides a scalable alternative. By efficiently arranging task-level failure configurations and recording short recovery segments, human operators can generate more than 10x as much valid recovery data per hour compared to robot teleoperation under our protocol. To address the embodiment gap between human and robot, we propose EgoRecovery, a co-training framework for learning recovery behavior, where human recovery demonstrations are aligned to a compact corrective-intent space shared with robot data, which captures the timing and magnitude of correction. Only a small number of robot recovery demonstrations are required to connect this intent to executable robot actions. At deployment, a learned recovery gate predicts when correction is needed from robot observations and activates the corrective intent only in recovery states. Experiments on real-world recovery tasks show that EgoRecovery improves success from failure starts over robot-only recovery, direct co-training with human recovery data, and direct intent-transfer baselines.

Learning robust dexterous grasping requires real-world data that records the physical outcomes of grasp attempts. Such data is hard to obtain at scale: teleoperation yields valid physical outcomes but is slow and operator-biased, while simulation-based generation is cheap and scalable but cannot certify contact validity. A natural solution is to generate candidate grasps and verify them on real hardware, but this scales only if the entire collection loop (perception, execution, labeling, and reset) runs without human intervention. We present AutoDex, an automated real-world data-collection system that closes this loop: for each candidate from a replaceable generator, it localizes the object under severe hand-object occlusion with dense 20-camera perception, executes collision-monitored robot motions, labels lift-and-hold success or failure, and actively resets the object between trials to expose additional candidates across stable poses. The result is a reusable database of physically labeled grasp trials that downstream systems can query by retrieval and feasibility filtering. Using AutoDex, we collect 3,593 grasp trials across Allegro and Inspire hands on 100 diverse objects, with synchronized multi-view observations and robot-state logs. For a matched 500-trajectory collection, AutoDex requires 10.3 h versus 49.4 h for teleoperation, yielding a 4.8x throughput improvement, and grasps retrieved from the AutoDex-validated database succeed 76% versus 34% for simulation-only validation. Code and data will be publicly released.

We consider how to most efficiently leverage teleoperator time to collect data for learning robust image-based value functions and policies for sparse reward robotic tasks. To accomplish this goal, we modify the process of data collection to include more than just successful demonstrations of the desired task. Instead we develop a novel protocol that we call Visual Backtracking Teleoperation (VBT), which deliberately collects a dataset of visually similar failures, recoveries, and successes. VBT data collection is particularly useful for efficiently learning accurate value functions from small datasets of image-based observations. We demonstrate VBT on a real robot to perform continuous control from image observations for the deformable manipulation task of T-shirt grasping. We find that by adjusting the data collection process we improve the quality of both the learned value functions and policies over a variety of baseline methods for data collection. Specifically, we find that offline reinforcement learning on VBT data outperforms standard behavior cloning on successful demonstration data by 13% when both methods are given equal-sized datasets of 60 minutes of data from the real robot.

Imitation learning from human demonstrations is a powerful framework to teach robots new skills. However, the performance of the learned policies is bottlenecked by the quality, scale, and variety of the demonstration data. In this paper, we aim to lower the barrier to collecting large and high-quality human demonstration data by proposing GELLO, a general framework for building low-cost and intuitive teleoperation systems for robotic manipulation. Given a target robot arm, we build a GELLO controller that has the same kinematic structure as the target arm, leveraging 3D-printed parts and off-the-shelf motors. GELLO is easy to build and intuitive to use. Through an extensive user study, we show that GELLO enables more reliable and efficient demonstration collection compared to commonly used teleoperation devices in the imitation learning literature such as VR controllers and 3D spacemouses. We further demonstrate the capabilities of GELLO for performing complex bi-manual and contact-rich manipulation tasks. To make GELLO accessible to everyone, we have designed and built GELLO systems for 3 commonly used robotic arms: Franka, UR5, and xArm. All software and hardware are open-sourced and can be found on our website: https://wuphilipp.github.io/gello/.

High-quality, long-horizon demonstrations are essential for embodied AI, yet acquiring such data for tightly coupled wheeled mobile manipulators remains a fundamental bottleneck. Unlike fixed-base systems, mobile manipulators require continuous coordination between SE(2) locomotion and precise manipulation, exposing limitations in existing teleoperation and wearable interfaces. We present SuperSuit, a bimodal data acquisition framework that supports both robot-in-the-loop teleoperation and active demonstration under a shared kinematic interface. Both modalities produce structurally identical joint-space trajectories, enabling direct data mixing without modifying downstream policies. For locomotion, SuperSuit maps natural human stepping to continuous planar base velocities, eliminating discrete command switches. For manipulation, it employs a strictly isomorphic wearable arm in both modes, while policy training is formulated in a shift-invariant delta-joint representation to mitigate calibration offsets and structural compliance without inverse kinematics. Real-world experiments on long-horizon mobile manipulation tasks show 2.6times higher demonstration throughput in active mode compared to a teleoperation baseline, comparable policy performance when substituting teleoperation data with active demonstrations at fixed dataset size, and monotonic performance improvement as active data volume increases. These results indicate that consistent kinematic representations across collection modalities enable scalable data acquisition for long-horizon mobile manipulation.

Teaching robots dexterous manipulation skills often requires collecting hundreds of demonstrations using wearables or teleoperation, a process that is challenging to scale. Videos of human-object interactions are easier to collect and scale, but leveraging them directly for robot learning is difficult due to the lack of explicit action labels from videos and morphological differences between robot and human hands. We propose Human2Sim2Robot, a novel real-to-sim-to-real framework for training dexterous manipulation policies using only one RGB-D video of a human demonstrating a task. Our method utilizes reinforcement learning (RL) in simulation to cross the human-robot embodiment gap without relying on wearables, teleoperation, or large-scale data collection typically necessary for imitation learning methods. From the demonstration, we extract two task-specific components: (1) the object pose trajectory to define an object-centric, embodiment-agnostic reward function, and (2) the pre-manipulation hand pose to initialize and guide exploration during RL training. We found that these two components are highly effective for learning the desired task, eliminating the need for task-specific reward shaping and tuning. We demonstrate that Human2Sim2Robot outperforms object-aware open-loop trajectory replay by 55% and imitation learning with data augmentation by 68% across grasping, non-prehensile manipulation, and multi-step tasks. Project Site: https://human2sim2robot.github.io

Quadrupedal robots have demonstrated impressive locomotion capabilities in complex environments, but equipping them with autonomous versatile manipulation skills in a scalable way remains a significant challenge. In this work, we introduce a cross-embodiment imitation learning system for quadrupedal manipulation, leveraging data collected from both humans and LocoMan, a quadruped equipped with multiple manipulation modes. Specifically, we develop a teleoperation and data collection pipeline, which unifies and modularizes the observation and action spaces of the human and the robot. To effectively leverage the collected data, we propose an efficient modularized architecture that supports co-training and pretraining on structured modality-aligned data across different embodiments. Additionally, we construct the first manipulation dataset for the LocoMan robot, covering various household tasks in both unimanual and bimanual modes, supplemented by a corresponding human dataset. We validate our system on six real-world manipulation tasks, where it achieves an average success rate improvement of 41.9% overall and 79.7% under out-of-distribution (OOD) settings compared to the baseline. Pretraining with human data contributes a 38.6% success rate improvement overall and 82.7% under OOD settings, enabling consistently better performance with only half the amount of robot data. Our code, hardware, and data are open-sourced at: https://human2bots.github.io.

Effective collaboration of dual-arm robots and their tool use capabilities are increasingly important areas in the advancement of robotics. These skills play a significant role in expanding robots' ability to operate in diverse real-world environments. However, progress is impeded by the scarcity of specialized training data. This paper introduces RoboTwin, a novel benchmark dataset combining real-world teleoperated data with synthetic data from digital twins, designed for dual-arm robotic scenarios. Using the COBOT Magic platform, we have collected diverse data on tool usage and human-robot interaction. We present a innovative approach to creating digital twins using AI-generated content, transforming 2D images into detailed 3D models. Furthermore, we utilize large language models to generate expert-level training data and task-specific pose sequences oriented toward functionality. Our key contributions are: 1) the RoboTwin benchmark dataset, 2) an efficient real-to-simulation pipeline, and 3) the use of language models for automatic expert-level data generation. These advancements are designed to address the shortage of robotic training data, potentially accelerating the development of more capable and versatile robotic systems for a wide range of real-world applications. The project page is available at https://robotwin-benchmark.github.io/early-version/

Imitation learning from human demonstrations has shown impressive performance in robotics. However, most results focus on table-top manipulation, lacking the mobility and dexterity necessary for generally useful tasks. In this work, we develop a system for imitating mobile manipulation tasks that are bimanual and require whole-body control. We first present Mobile ALOHA, a low-cost and whole-body teleoperation system for data collection. It augments the ALOHA system with a mobile base, and a whole-body teleoperation interface. Using data collected with Mobile ALOHA, we then perform supervised behavior cloning and find that co-training with existing static ALOHA datasets boosts performance on mobile manipulation tasks. With 50 demonstrations for each task, co-training can increase success rates by up to 90%, allowing Mobile ALOHA to autonomously complete complex mobile manipulation tasks such as sauteing and serving a piece of shrimp, opening a two-door wall cabinet to store heavy cooking pots, calling and entering an elevator, and lightly rinsing a used pan using a kitchen faucet. Project website: https://mobile-aloha.github.io

Robot foundation models have shown remarkable performance in robot control, yet adapting them to a new task still relies heavily on teleoperated demonstrations. Egocentric human videos offer a scalable substitute, but overlaying rendered robots on human videos or retargeting human poses into robot actions leaves significant visual or action gaps for high-DoF robot embodiments. To address this limitation, we propose RoboTryOn, which treats human-to-robot translation as virtual try-on: try-on keeps the person and swaps the garment, RoboTryOn keeps the demonstrated motion and swaps the human for the robot. Specifically, RoboTryOn converts a human video into a video of the target robot specified by a reference image, while preserving the original task, objects, and background. To maintain visual consistency, we translate selected keyframes autoregressively and use them to guide video synthesis with motion conditioned on the human hand skeleton. Additionally, we use an inverse dynamics model (IDM) that incorporates depth features to infer action labels from synthesized videos for policy learning. Our experiments across multiple humanoid embodiments show that policies trained with our synthetic data improve the average success rate on novel tasks, including challenging bimanual manipulation, from 2% to 60%, without any real robot demonstration of those tasks. Moreover, training with our synthetic data matches the performance of policies trained solely on teleoperated demonstrations at approximately a third of the collection cost, demonstrating the cost efficiency of our approach.

Scaling mobile manipulation imitation learning is bottlenecked by expensive mobile robot teleoperation. We present Egocentric Mobile MAnipulation (EMMA), an end-to-end framework training mobile manipulation policies from human mobile manipulation data with static robot data, sidestepping mobile teleoperation. To accomplish this, we co-train human full-body motion data with static robot data. In our experiments across three real-world tasks, EMMA demonstrates comparable performance to baselines trained on teleoperated mobile robot data (Mobile ALOHA), achieving higher or equivalent task performance in full task success. We find that EMMA is able to generalize to new spatial configurations and scenes, and we observe positive performance scaling as we increase the hours of human data, opening new avenues for scalable robotic learning in real-world environments. Details of this project can be found at https://ego-moma.github.io/.

A generalist robot should not only perform diverse tasks but also improve through experience, turning what it learns during execution into capabilities that later tasks can reuse. Robot agents that act through code can already repair programs from execution feedback, yet it remains a central challenge to organize this experience around the task structure that gives it meaning, so that each repair is attributed to the responsible capability, supported by execution evidence, and validated before it is reused. We introduce RoboRSI, a robot self-improvement system built on Top-Down Skill Refinement (TSR). TSR decomposes tasks into compound, atomic, and base skills with scoped responsibilities and explicit input--output contracts, attributes each execution outcome to the responsible branch, and confines revision to that branch. Building upon this structure, a Manager, Planner, Engineer, and Reviewer coordinate planning, execution, diagnosis, and the validated release of new skills, while people steer the process through objectives and corrections; stable skill sequences are further consolidated into reusable compound skills. On a mobile manipulator, RoboRSI develops multi-object household cleanup over 104 rounds. In simulation, it achieves the highest success rate on LIBERO, LIBERO-PRO, LIBERO-Plus, and RoboTwin, exceeding the strongest baseline by 2.7 to 11.0 percentage points.

Scaling robotics data collection is critical to advancing general-purpose robots. Current approaches often rely on teleoperated demonstrations which are difficult to scale. We propose a novel data collection method that eliminates the need for robotics hardware by leveraging human video demonstrations. By training imitation learning policies on this human data, our approach enables zero-shot deployment on robots without collecting any robot-specific data. To bridge the embodiment gap between human and robot appearances, we utilize a data editing approach on the input observations that aligns the image distributions between training data on humans and test data on robots. Our method significantly reduces the cost of diverse data collection by allowing anyone with an RGBD camera to contribute. We demonstrate that our approach works in diverse, unseen environments and on varied tasks.

Continuum robots offer strong potential for manipulation tasks due to their high degrees of freedom, compliant structures, and operational safety. However, their adoption in both research and practical applications has been hindered by reproducibility issues arising from complex fabrication and assembly processes, challenging kinematic modeling, and a lack of intuitive control interfaces. To address these challenges, we present a novel open-source continuum robot design. The platform features a simplified fabrication pipeline enabled by multi-material 3D printing, allowing the arm to be fabricated as a monolithic compliant structure with minimal assembly. Control is achieved through an isomorphic teleoperation interface that establishes a direct actuator-level mapping, eliminating the need for explicit kinematic modeling and providing a singularity-free mapping. Building on this hardware design, the platform further supports imitation-learning-based autonomous control. The proposed system is evaluated through hardware characterization and a set of manipulation tasks. Experimental results demonstrate that the platform provides a reproducible, learning-ready continuum robot system, accelerating algorithmic development and systematic benchmarking for the continuum robotics community.

Recent works in robotic manipulation through reinforcement learning (RL) or imitation learning (IL) have shown potential for tackling a range of tasks e.g., opening a drawer or a cupboard. However, these techniques generalize poorly to unseen objects. We conjecture that this is due to the high-dimensional action space for joint control. In this paper, we take an alternative approach and separate the task of learning 'what to do' from 'how to do it' i.e., whole-body control. We pose the RL problem as one of determining the skill dynamics for a disembodied virtual manipulator interacting with articulated objects. The whole-body robotic kinematic control is optimized to execute the high-dimensional joint motion to reach the goals in the workspace. It does so by solving a quadratic programming (QP) model with robotic singularity and kinematic constraints. Our experiments on manipulating complex articulated objects show that the proposed approach is more generalizable to unseen objects with large intra-class variations, outperforming previous approaches. The evaluation results indicate that our approach generates more compliant robotic motion and outperforms the pure RL and IL baselines in task success rates. Additional information and videos are available at https://kl-research.github.io/decoupskill

Building a low-latency humanoid teleoperation system is essential for collecting diverse reactive and dynamic demonstrations. However, end-to-end latencies in existing approaches consistently hover around 200ms, roughly equal to human reaction time, that severely limits responsiveness and prevents tasks requiring rapid feedback. We identify position-only PD control as the root cause of this latency floor and propose ExtremControl, a low-latency whole-body control framework that: (1) incorporates scaled velocity feedforward in low-level control, reducing tracking delay by approximately 70ms with a provably optimal feedforward ratio; (2) operates directly on SE(3) poses of selected rigid links, primarily humanoid extremities, to avoid joint-space retargeting in the control loop. To minimize retargeting time, we derive a closed-form Cartesian-space mapping that uses a single anthropomorphic calibration step to translate human motion into humanoid link targets, accommodating operators with varying body proportions. Furthermore, we provide a theoretical framework for selecting control hyperparameters, and validate the effectiveness of velocity feedforward control in the reinforcement learning for locomotion setting through experiments in both simulation and the real world. Building on ExtremControl, we implement a teleoperation system supporting both optical motion capture and VR-based tracking, achieving end-to-end latency as low as 50ms --- well beneath the threshold at which system delay adds a full human reaction cycle to the control loop. This enables a qualitatively new class of reactive behaviors, including ping-pong ball balancing, juggling, and real-time return, that are beyond the capability of existing teleoperation systems.

It is challenging for humans -- particularly those living with physical disabilities -- to control high-dimensional, dexterous robots. Prior work explores learning embedding functions that map a human's low-dimensional inputs (e.g., via a joystick) to complex, high-dimensional robot actions for assistive teleoperation; however, a central problem is that there are many more high-dimensional actions than available low-dimensional inputs. To extract the correct action and maximally assist their human controller, robots must reason over their context: for example, pressing a joystick down when interacting with a coffee cup indicates a different action than when interacting with knife. In this work, we develop assistive robots that condition their latent embeddings on visual inputs. We explore a spectrum of visual encoders and show that incorporating object detectors pretrained on small amounts of cheap, easy-to-collect structured data enables i) accurately and robustly recognizing the current context and ii) generalizing control embeddings to new objects and tasks. In user studies with a high-dimensional physical robot arm, participants leverage this approach to perform new tasks with unseen objects. Our results indicate that structured visual representations improve few-shot performance and are subjectively preferred by users.

Collecting demonstrations enriched with fine-grained tactile information is critical for dexterous manipulation, particularly in contact-rich tasks that require precise force control and physical interaction. While prior works primarily focus on teleoperation or video-based retargeting, they often suffer from kinematic mismatches and the absence of real-time tactile feedback, hindering the acquisition of high-fidelity tactile data. To mitigate this issue, we propose KineDex, a hand-over-hand kinesthetic teaching paradigm in which the operator's motion is directly transferred to the dexterous hand, enabling the collection of physically grounded demonstrations enriched with accurate tactile feedback. To resolve occlusions from human hand, we apply inpainting technique to preprocess the visual observations. Based on these demonstrations, we then train a visuomotor policy using tactile-augmented inputs and implement force control during deployment for precise contact-rich manipulation. We evaluate KineDex on a suite of challenging contact-rich manipulation tasks, including particularly difficult scenarios such as squeezing toothpaste onto a toothbrush, which require precise multi-finger coordination and stable force regulation. Across these tasks, KineDex achieves an average success rate of 74.4%, representing a 57.7% improvement over the variant without force control. Comparative experiments with teleoperation and user studies further validate the advantages of KineDex in data collection efficiency and operability. Specifically, KineDex collects data over twice as fast as teleoperation across two tasks of varying difficulty, while maintaining a near-100% success rate, compared to under 50% for teleoperation.

Real-world robotic manipulation in homes and factories demands reliability, efficiency, and robustness that approach or surpass skilled human operators. We present RL-100, a real-world reinforcement learning training framework built on diffusion visuomotor policies trained bu supervised learning. RL-100 introduces a three-stage pipeline. First, imitation learning leverages human priors. Second, iterative offline reinforcement learning uses an Offline Policy Evaluation procedure, abbreviated OPE, to gate PPO-style updates that are applied in the denoising process for conservative and reliable improvement. Third, online reinforcement learning eliminates residual failure modes. An additional lightweight consistency distillation head compresses the multi-step sampling process in diffusion into a single-step policy, enabling high-frequency control with an order-of-magnitude reduction in latency while preserving task performance. The framework is task-, embodiment-, and representation-agnostic and supports both 3D point clouds and 2D RGB inputs, a variety of robot platforms, and both single-step and action-chunk policies. We evaluate RL-100 on seven real-robot tasks spanning dynamic rigid-body control, such as Push-T and Agile Bowling, fluids and granular pouring, deformable cloth folding, precise dexterous unscrewing, and multi-stage orange juicing. RL-100 attains 100\% success across evaluated trials for a total of 900 out of 900 episodes, including up to 250 out of 250 consecutive trials on one task. The method achieves near-human teleoperation or better time efficiency and demonstrates multi-hour robustness with uninterrupted operation lasting up to two hours.

Vision-language-action (VLA) models have enabled language-conditioned, long-horizon robot manipulation, but most existing systems are limited to grippers. Scaling VLA policies to bimanual robots with high degree-of-freedom (DoF) dexterous hands remains challenging due to the expanded action space, frequent hand-object occlusions, and the cost of collecting real-robot data. We present GR-Dexter, a holistic hardware-model-data framework for VLA-based generalist manipulation on a bimanual dexterous-hand robot. Our approach combines the design of a compact 21-DoF robotic hand, an intuitive bimanual teleoperation system for real-robot data collection, and a training recipe that leverages teleoperated robot trajectories together with large-scale vision-language and carefully curated cross-embodiment datasets. Across real-world evaluations spanning long-horizon everyday manipulation and generalizable pick-and-place, GR-Dexter achieves strong in-domain performance and improved robustness to unseen objects and unseen instructions. We hope GR-Dexter serves as a practical step toward generalist dexterous-hand robotic manipulation.

Research on autonomous surgery has largely focused on simple task automation in controlled environments. However, real-world surgical applications demand dexterous manipulation over extended durations and generalization to the inherent variability of human tissue. These challenges remain difficult to address using existing logic-based or conventional end-to-end learning approaches. To address this gap, we propose a hierarchical framework for performing dexterous, long-horizon surgical steps. Our approach utilizes a high-level policy for task planning and a low-level policy for generating robot trajectories. The high-level planner plans in language space, generating task-level or corrective instructions that guide the robot through the long-horizon steps and correct for the low-level policy's errors. We validate our framework through ex vivo experiments on cholecystectomy, a commonly-practiced minimally invasive procedure, and conduct ablation studies to evaluate key components of the system. Our method achieves a 100\% success rate across eight unseen ex vivo gallbladders, operating fully autonomously without human intervention. This work demonstrates step-level autonomy in a surgical procedure, marking a milestone toward clinical deployment of autonomous surgical systems.

Achieving successful robotic manipulation is an essential step towards robots being widely used in industry and home settings. Recently, many learning-based methods have been proposed to tackle this challenge, with imitation learning showing great promise. However, imperfect demonstrations and a lack of feedback from teleoperation systems may lead to poor or even unsafe results. In this work we explore the effect of demonstrator force feedback on imitation learning, using a feedback glove and a robot arm to render fingertip-level and palm-level forces, respectively. 10 participants recorded 5 demonstrations of a pick-and-place task with 3 grippers, under conditions with no force feedback, fingertip force feedback, and fingertip and palm force feedback. Results show that force feedback significantly reduces demonstrator fingertip and palm forces, leads to a lower variation in demonstrator forces, and recorded trajectories that a quicker to execute. Using behavioral cloning, we find that agents trained to imitate these trajectories mirror these benefits, even though agents have no force data shown to them during training. We conclude that immersive demonstrations, achieved with force feedback, may be the key to unlocking safer, quicker to execute dexterous manipulation policies.

Recent progress in robot manipulation has been largely driven by learning from large-scale demonstrations. For humanoid robot loco-manipulation tasks, however, existing data sources force an unsatisfying tradeoff between trajectory quality and scalability. Real-world teleoperation provides the highest-quality trajectories but requires dedicated physical space and time-consuming scene resets. Simulation offers an alternative way out of this dilemma: it can produce clean, embodiment-aligned data at scale without any physical hardware. In this paper, we propose OASIS, a simulation-data-driven framework for humanoid loco-manipulation. OASIS automatically reconstructs realistic object assets from real-world images using a 3D generative model. Based on these assets, trajectories are first collected through teleoperation in simulation, and then augmented under diverse domain randomizations in a post-processing stage. With the resulting simulation data, we further design a hierarchical visuomotor policy for humanoid loco-manipulation. Extensive experiments on the real humanoid robot show that, under zero-shot deployment, the policy trained on our simulation data achieves higher success rates on most tasks than that trained on real-robot teleoperation data, owing largely to the broad lighting and environmental variations covered by our simulation rendering, which real-robot data fails to capture. The project page is available at https://oasis-humanoid.github.io/.

Injury to the cervical spinal cord can cause quadriplegia, impairing muscle function in all four limbs. People with impaired hand function and mobility encounter significant difficulties in carrying out essential self-care and household tasks. Despite the impairment of their neural drive, their volitional myoelectric activity is often partially preserved. High-density electromyography (HDEMG) can detect this myoelectric activity, which can serve as control inputs to assistive devices. Previous HDEMG-controlled robotic interfaces have primarily been limited to controlling table-mounted robot arms. These have constrained reach capabilities. Instead, the ability to control mobile manipulators, which have no such workspace constraints, could allow individuals with quadriplegia to perform a greater variety of assistive tasks, thus restoring independence and reducing caregiver workload. In this study, we introduce a non-invasive wearable HDEMG interface with real-time myoelectric hand gesture recognition, enabling both coarse and fine control over the intricate mobility and manipulation functionalities of an 8 degree-of-freedom mobile manipulator. Our evaluation, involving 13 participants engaging in challenging self-care and household activities, demonstrates the potential of our wearable HDEMG system to profoundly enhance user independence by enabling non-invasive control of a mobile manipulator.

Humans can accomplish complex contact-rich tasks using vision and touch, with highly reactive capabilities such as quick adjustments to environmental changes and adaptive control of contact forces; however, this remains challenging for robots. Existing visual imitation learning (IL) approaches rely on action chunking to model complex behaviors, which lacks the ability to respond instantly to real-time tactile feedback during the chunk execution. Furthermore, most teleoperation systems struggle to provide fine-grained tactile / force feedback, which limits the range of tasks that can be performed. To address these challenges, we introduce TactAR, a low-cost teleoperation system that provides real-time tactile feedback through Augmented Reality (AR), along with Reactive Diffusion Policy (RDP), a novel slow-fast visual-tactile imitation learning algorithm for learning contact-rich manipulation skills. RDP employs a two-level hierarchy: (1) a slow latent diffusion policy for predicting high-level action chunks in latent space at low frequency, (2) a fast asymmetric tokenizer for closed-loop tactile feedback control at high frequency. This design enables both complex trajectory modeling and quick reactive behavior within a unified framework. Through extensive evaluation across three challenging contact-rich tasks, RDP significantly improves performance compared to state-of-the-art visual IL baselines through rapid response to tactile / force feedback. Furthermore, experiments show that RDP is applicable across different tactile / force sensors. Code and videos are available on https://reactive-diffusion-policy.github.io.

This paper investigates humanoid whole-body dexterous manipulation, where the efficient collection of high-quality demonstration data remains a central bottleneck. Existing teleoperation systems often suffer from limited portability, occlusion, or insufficient precision, which hinders their applicability to complex whole-body tasks. To address these challenges, we introduce HumDex, a portable teleoperation system designed for humanoid whole-body dexterous manipulation. Our system leverages IMU-based motion tracking to address the portability-precision trade-off, enabling accurate full-body tracking while remaining easy to deploy. For dexterous hand control, we further introduce a learning-based retargeting method that generates smooth and natural hand motions without manual parameter tuning. Beyond teleoperation, HumDex enables efficient collection of human motion data. Building on this capability, we propose a two-stage imitation learning framework that first pre-trains on diverse human motion data to learn generalizable priors, and then fine-tunes on robot data to bridge the embodiment gap for precise execution. We demonstrate that this approach significantly improves generalization to new configurations, objects, and backgrounds with minimal data acquisition costs. The entire system is fully reproducible and open-sourced at https://github.com/physical-superintelligence-lab/humdex.

Whole-body loco-manipulation for quadruped robots with arms remains a challenging problem, particularly in achieving multi-task control. To address this, we propose MLM, a reinforcement learning framework driven by both real-world and simulation data. It enables a six-DoF robotic arm-equipped quadruped robot to perform whole-body loco-manipulation for multiple tasks autonomously or under human teleoperation. To address the problem of balancing multiple tasks during the learning of loco-manipulation, we introduce a trajectory library with an adaptive, curriculum-based sampling mechanism. This approach allows the policy to efficiently leverage real-world collected trajectories for learning multi-task loco-manipulation. To address deployment scenarios with only historical observations and to enhance the performance of policy execution across tasks with different spatial ranges, we propose a Trajectory-Velocity Prediction policy network. It predicts unobservable future trajectories and velocities. By leveraging extensive simulation data and curriculum-based rewards, our controller achieves whole-body behaviors in simulation and zero-shot transfer to real-world deployment. Ablation studies in simulation verify the necessity and effectiveness of our approach, while real-world experiments on a Go2 robot with an Airbot robotic arm demonstrate the policy's good performance in multi-task execution.

Autonomous manipulation in robot arms is a complex and evolving field of study in robotics. This paper proposes work stands at the intersection of two innovative approaches in the field of robotics and machine learning. Inspired by the Action Chunking with Transformer (ACT) model, which employs joint location and image data to predict future movements, our work integrates principles of Bilateral Control-Based Imitation Learning to enhance robotic control. Our objective is to synergize these techniques, thereby creating a more robust and efficient control mechanism. In our approach, the data collected from the environment are images from the gripper and overhead cameras, along with the joint angles, angular velocities, and forces of the follower robot using bilateral control. The model is designed to predict the subsequent steps for the joint angles, angular velocities, and forces of the leader robot. This predictive capability is crucial for implementing effective bilateral control in the follower robot, allowing for more nuanced and responsive maneuvering.

Despite the importance of tactile sensing for reliable manipulation, most existing Vision-Language-Action (VLA) datasets remain vision-only, and those that do incorporate tactile information typically lack the joint combination of task diversity, language conditioning, and action trajectories. Furthermore, existing teleoperation pipelines rarely provide haptic feedback to the operator, despite its established role in demonstration quality and manipulation stability. In this work, we present HapTile, a contact-grounded visuotactile manipulation dataset that advances beyond vision-only trajectory datasets by embedding physical interaction sensing at two levels: fingertip tactile feedback at the robot end-effector, and haptic-informed demonstrations at the teleoperator side. The data collection platform integrates haptic feedback directly into the teleoperation controller, enabling the operator to perceive contact interactions in real time. It is built around a standard and reproducible robotic system equipped with custom-designed fingertip tactile sensors. The dataset comprises everyday manipulation tasks spanning a broad range of contact-rich skills, including pick-and-place, folding, pressing, stacking, and other routine activities. Each task is paired with language instructions that condition the policy on the manipulation objective, together with synchronized visuotactile observations and action trajectories. In addition, we provide a benchmarking study on contact-rich policy learning using two baseline models to evaluate the effectiveness of the proposed contact-grounded dataset. The dataset and additional details are available on our website: haptile-dataset.github.io.

Bimanual robotic manipulation is a long-standing challenge of embodied intelligence due to its characteristics of dual-arm spatial-temporal coordination and high-dimensional action spaces. Previous studies rely on pre-defined action taxonomies or direct teleoperation to alleviate or circumvent these issues, often making them lack simplicity, versatility and scalability. Differently, we believe that the most effective and efficient way for teaching bimanual manipulation is learning from human demonstrated videos, where rich features such as spatial-temporal positions, dynamic postures, interaction states and dexterous transitions are available almost for free. In this work, we propose the YOTO (You Only Teach Once), which can extract and then inject patterns of bimanual actions from as few as a single binocular observation of hand movements, and teach dual robot arms various complex tasks. Furthermore, based on keyframes-based motion trajectories, we devise a subtle solution for rapidly generating training demonstrations with diverse variations of manipulated objects and their locations. These data can then be used to learn a customized bimanual diffusion policy (BiDP) across diverse scenes. In experiments, YOTO achieves impressive performance in mimicking 5 intricate long-horizon bimanual tasks, possesses strong generalization under different visual and spatial conditions, and outperforms existing visuomotor imitation learning methods in accuracy and efficiency. Our project link is https://hnuzhy.github.io/projects/YOTO.

Development of dexterous manipulation hardware has primarily focused on hands and grippers. However, these end-effectors are often paired with bulky and highly stiff wrists that limit performance in human environments. More designs have adopted backdrivable actuation, but are still difficult to model and control due to coupled kinematics or high mechanical inertia from heavy links. We present DexWrist, a robotic wrist that advances manipulation in highly constrained environments and enables dynamic, contact-rich tasks. We achieve this by combining quasi-direct drive actuation with a decoupled parallel kinematic mechanism in a compact design. It delivers 3.75 +/- 0.05 Nm rated torque, 0.33 +/- 0.06 Nm backdrive torque, 10.15 +/- 1.34 Hz torque bandwidth, +/- 40 degrees ROM in both DOFs, and a one-to-one motor-to-DOF mapping in a 0.97 kg package. In practice, these properties increase workspace in cluttered environments and stabilize contact without the need for finely tuned admittance control. We evaluate DexWrist as a drop-in wrist upgrade in simulation and on two robot arms performing representative constrained and contact-rich tasks. In learned policy evaluations, DexWrist achieved 50-76% relative improvements in success rate, and reduced autonomous task completion times by 3-5x. More details about DexWrist can be found at https://dexwrist.csail.mit.edu.

High-quality teleoperation datasets are costly to collect, particularly for hard tasks. We observe that many tasks exhibit directional asymmetry: completing the forward hard task is difficult, whereas reversing it by relaxing or disrupting the environment is comparatively easy. This suggests that reversed easy-task trajectories can serve as a scalable supervision signal for the hard task, reducing the cost of manual demonstration collection. However, reversed data can be noisy, and directly training on it may yield suboptimal policies. To enable largely automated acquisition and effective use of reversed data, we propose a teleoperation-cost effective framework for hard policy learning via temporal reversal of easy tasks, consisting of three key components: a closed-loop data collection pipeline that alternates between hard-task and easy-task policies to autonomously reset the environment and generate diverse trajectories; a hierarchical data refinement pipeline that temporally inverts easy-task rollouts and filters low-quality motion using kinematic priors and a critic-guided advantage filter; and an iterative policy learning method that trains the hard-task policy using both initial reversed easy-task demonstrations and the filtered reversed data in a continuous online learning loop. By combining automated collection, hierarchical refinement, and iterative learning, our method enables scalable, reliable training of complex, high-precision manipulation tasks. Across two simulated benchmarks and real-robot experiments, we demonstrate that our method improves hard-task success rates with higher data efficiency and more stable training compared to reversal-based and reinforcement-learning baselines, without requiring extensive hard-task teleoperation.

There are a variety of mechanisms (i.e., input types) for real-time human interaction that can facilitate effective human-robot teaming. For example, previous works have shown how teleoperation, corrective, and discrete (i.e., preference over a small number of choices) input can enable robots to complete complex tasks. However, few previous works have looked at combining different methods, and in particular, opportunities for a robot to estimate and elicit the most effective form of assistance given its understanding of a task. In this paper, we propose a method for estimating the value of different human assistance mechanisms based on the action uncertainty of a robot policy. Our key idea is to construct mathematical expressions for the expected post-interaction differential entropy (i.e., uncertainty) of a stochastic robot policy to compare the expected value of different interactions. As each type of human input imposes a different requirement for human involvement, we demonstrate how differential entropy estimates can be combined with a likelihood penalization approach to effectively balance feedback informational needs with the level of required input. We demonstrate evidence of how our approach interfaces with emergent learning models (e.g., a diffusion model) to produce accurate assistance value estimates through both simulation and a robot user study. Our user study results indicate that the proposed approach can enable task completion with minimal human feedback for uncertain robot behaviors.

Robotic manipulation remains a core challenge in robotics, particularly for contact-rich tasks such as industrial assembly and disassembly. Existing datasets have significantly advanced learning in manipulation but are primarily focused on simpler tasks like object rearrangement, falling short of capturing the complexity and physical dynamics involved in assembly and disassembly. To bridge this gap, we present REASSEMBLE (Robotic assEmbly disASSEMBLy datasEt), a new dataset designed specifically for contact-rich manipulation tasks. Built around the NIST Assembly Task Board 1 benchmark, REASSEMBLE includes four actions (pick, insert, remove, and place) involving 17 objects. The dataset contains 4,551 demonstrations, of which 4,035 were successful, spanning a total of 781 minutes. Our dataset features multi-modal sensor data, including event cameras, force-torque sensors, microphones, and multi-view RGB cameras. This diverse dataset supports research in areas such as learning contact-rich manipulation, task condition identification, action segmentation, and task inversion learning. The REASSEMBLE will be a valuable resource for advancing robotic manipulation in complex, real-world scenarios. The dataset is publicly available on our project website: https://tuwien-asl.github.io/REASSEMBLE_page/.

The use of datasets is getting more relevance in surgical robotics since they can be used to recognise and automate tasks. Also, this allows to use common datasets to compare different algorithms and methods. The objective of this work is to provide a complete dataset of three common training surgical tasks that surgeons perform to improve their skills. For this purpose, 12 subjects teleoperated the da Vinci Research Kit to perform these tasks. The obtained dataset includes all the kinematics and dynamics information provided by the da Vinci robot (both master and slave side) together with the associated video from the camera. All the information has been carefully timestamped and provided in a readable csv format. A MATLAB interface integrated with ROS for using and replicating the data is also provided.

Robotics is undergoing a significant transformation powered by advances in high-level control techniques based on machine learning, giving rise to the field of robot learning. Recent progress in robot learning has been accelerated by the increasing availability of affordable teleoperation systems, large-scale openly available datasets, and scalable learning-based methods. However, development in the field of robot learning is often slowed by fragmented, closed-source tools designed to only address specific sub-components within the robotics stack. In this paper, we present lerobot, an open-source library that integrates across the entire robot learning stack, from low-level middleware communication for motor controls to large-scale dataset collection, storage and streaming. The library is designed with a strong focus on real-world robotics, supporting accessible hardware platforms while remaining extensible to new embodiments. It also supports efficient implementations for various state-of-the-art robot learning algorithms from multiple prominent paradigms, as well as a generalized asynchronous inference stack. Unlike traditional pipelines which heavily rely on hand-crafted techniques, lerobot emphasizes scalable learning approaches that improve directly with more data and compute. Designed for accessibility, scalability, and openness, lerobot lowers the barrier to entry for researchers and practitioners to robotics while providing a platform for reproducible, state-of-the-art robot learning.

Large-scale, diverse robot datasets have emerged as a promising path toward enabling dexterous manipulation policies to generalize to novel environments, but acquiring such datasets presents many challenges. While teleoperation provides high-fidelity datasets, its high cost limits its scalability. Instead, what if people could use their own hands, just as they do in everyday life, to collect data? In DexWild, a diverse team of data collectors uses their hands to collect hours of interactions across a multitude of environments and objects. To record this data, we create DexWild-System, a low-cost, mobile, and easy-to-use device. The DexWild learning framework co-trains on both human and robot demonstrations, leading to improved performance compared to training on each dataset individually. This combination results in robust robot policies capable of generalizing to novel environments, tasks, and embodiments with minimal additional robot-specific data. Experimental results demonstrate that DexWild significantly improves performance, achieving a 68.5% success rate in unseen environments-nearly four times higher than policies trained with robot data only-and offering 5.8x better cross-embodiment generalization. Video results, codebases, and instructions at https://dexwild.github.io

Foundation-model policies for robotic manipulation are advancing rapidly on task success, but rigorous evaluation of whether they succeed safely is still lacking. We introduce ManiGuard, a specification-grounded framework for evaluating and improving the safety of foundation-model manipulation, comprising the ManiGuard-Bench task suite and a paired safety-annotated trajectory-generation pipeline. ManiGuard-Bench organizes six contact-rich household task families into 200 locked base tasks along a skill times constraint taxonomy, with safety specified independently of task success. Each task is evaluated under one in-distribution and four single-axis out-of-distribution perturbations that hold the safety specification fixed, giving 1,000 locked scenarios. Every rollout is runtime-checked by LTL_f-grounded automaton monitors over physics-grounded predicates rather than learned classifiers or LLM judges, in simulation and on a physical Franka platform. The pipeline pairs an automated motion-planning generator with human teleoperation, annotated by the same per-step monitor, and directly supports safety-aware fine-tuning; we release 8,000 safety-annotated demonstrations, 40 per base task. Benchmarking zero-shot and fine-tuned VLAs across more than 23,000 rollouts, we find: (i) safety must be evaluated independently of task success, as 6-21% of successful rollouts violate the specification; (ii) fine-tuning on our suite raises safe task completion from near zero to 7.5-29.8% and engaged-and-safe behavior from 16-40% to 51-72%; but (iii) a gap remains that scaling demonstrations does not close, with 21-42% of engaged rollouts still violating, two of six families below 2% safe success for every policy, and these failures persisting under distribution shift and on hardware.

This paper introduces RoboDexVLM, an innovative framework for robot task planning and grasp detection tailored for a collaborative manipulator equipped with a dexterous hand. Previous methods focus on simplified and limited manipulation tasks, which often neglect the complexities associated with grasping a diverse array of objects in a long-horizon manner. In contrast, our proposed framework utilizes a dexterous hand capable of grasping objects of varying shapes and sizes while executing tasks based on natural language commands. The proposed approach has the following core components: First, a robust task planner with a task-level recovery mechanism that leverages vision-language models (VLMs) is designed, which enables the system to interpret and execute open-vocabulary commands for long sequence tasks. Second, a language-guided dexterous grasp perception algorithm is presented based on robot kinematics and formal methods, tailored for zero-shot dexterous manipulation with diverse objects and commands. Comprehensive experimental results validate the effectiveness, adaptability, and robustness of RoboDexVLM in handling long-horizon scenarios and performing dexterous grasping. These results highlight the framework's ability to operate in complex environments, showcasing its potential for open-vocabulary dexterous manipulation. Our open-source project page can be found at https://henryhcliu.github.io/robodexvlm.

Bimanual manipulation with dexterous hands has attracted growing attention in research on robotic action models. However, few studies have developed benchmarks specifically tailored for dexterous manipulation, leaving the dexterous manipulation capabilities of existing models insufficiently characterized. In this paper, we present BiDex-100, a simulation benchmark for bimanual dexterous manipulation that combines broad task coverage, multi-dimensional evaluation, and high-DoF hand embodiments. Concretely, the benchmark comprises 106 tasks organized along five capability axes: generalization, instruction following, limited demonstrations, long horizon, and memory. Each task is paired with an out-of-domain variant featuring controlled visual and spatial changes, allowing systematic assessment of robustness. In addition, the benchmark supports two embodiments and provides 8,080 success-validated teleoperated demonstrations, totaling 6.25 million frames. We evaluate seven recent Vision-Language-Action models under a unified protocol, establishing baselines for capability-specific performance, robustness, and data efficiency. The website is available at https://BiDex-100.github.io/BiDex-100/.

We introduce a novel system for human-to-robot trajectory transfer that enables robots to manipulate objects by learning from human demonstration videos. The system consists of four modules. The first module is a data collection module that is designed to collect human demonstration videos from the point of view of a robot using an AR headset. The second module is a video understanding module that detects objects and extracts 3D human-hand trajectories from demonstration videos. The third module transfers a human-hand trajectory into a reference trajectory of a robot end-effector in 3D space. The last module utilizes a trajectory optimization algorithm to solve a trajectory in the robot configuration space that can follow the end-effector trajectory transferred from the human demonstration. Consequently, these modules enable a robot to watch a human demonstration video once and then repeat the same mobile manipulation task in different environments, even when objects are placed differently from the demonstrations. Experiments of different manipulation tasks are conducted on a mobile manipulator to verify the effectiveness of our system

Real-world household tasks present significant challenges for mobile manipulation robots. An analysis of existing robotics benchmarks reveals that successful task performance hinges on three key whole-body control capabilities: bimanual coordination, stable and precise navigation, and extensive end-effector reachability. Achieving these capabilities requires careful hardware design, but the resulting system complexity further complicates visuomotor policy learning. To address these challenges, we introduce the BEHAVIOR Robot Suite (BRS), a comprehensive framework for whole-body manipulation in diverse household tasks. Built on a bimanual, wheeled robot with a 4-DoF torso, BRS integrates a cost-effective whole-body teleoperation interface for data collection and a novel algorithm for learning whole-body visuomotor policies. We evaluate BRS on five challenging household tasks that not only emphasize the three core capabilities but also introduce additional complexities, such as long-range navigation, interaction with articulated and deformable objects, and manipulation in confined spaces. We believe that BRS's integrated robotic embodiment, data collection interface, and learning framework mark a significant step toward enabling real-world whole-body manipulation for everyday household tasks. BRS is open-sourced at https://behavior-robot-suite.github.io/

Learning dexterous manipulation requires demonstrations that preserve fine hand-object interactions while remaining executable at deployment. Existing pipelines either lose deployable dexterity through retargeting or embodiment conversion, or rely on robot-specific teleoperation that is costly to scale and often lacks intuitive, contact-aware control for dexterous data collection. We present RealDexUMI, a wearable universal manipulation interface built around a shared dexterous end-effector module that integrates a lightweight dexterous hand, in-hand vision, and fingertip tactile sensing. A palm-side isomorphic teleoperation glove maps human finger inputs to robot-hand joint commands, enabling real-time, retargeting-free, intuitive, and precise hand control. The shared hand and sensing modules yield zero-gap end-effector data, with matched in-hand observations, tactile signals, contacts, and hand actions between collection and deployment. Across eight real-robot tasks spanning fine-grained, contact-rich, long-horizon, and bimanual manipulation, policies trained on RealDexUMI data achieve an average success rate of 88.75%, generalize to unseen initial poses, and transfer across three embodiments. Website: https://research.beingbeyond.com/realdexumi

Recent robot learning methods commonly rely on imitation learning from massive robotic dataset collected with teleoperation. When facing a new task, such methods generally require collecting a set of new teleoperation data and finetuning the policy. Furthermore, the teleoperation data collection pipeline is also tedious and expensive. Instead, human is able to efficiently learn new tasks by just watching others do. In this paper, we introduce a novel two-stage framework that utilizes human demonstrations to learn a generalizable robot policy. Such policy can directly take human demonstration video as a prompt and perform new tasks without any new teleoperation data and model finetuning at all. In the first stage, we train video generation model that captures a joint representation for both the human and robot demonstration video data using cross-prediction. In the second stage, we fuse the learned representation with a shared action space between human and robot using a novel prototypical contrastive loss. Empirical evaluations on real-world dexterous manipulation tasks show the effectiveness and generalization capabilities of our proposed method.

Data-driven robotic manipulation learning depends on large-scale, high-quality expert demonstration datasets. However, existing datasets, which primarily rely on human teleoperated robot collection, are limited in terms of scalability, trajectory smoothness, and applicability across different robotic embodiments in real-world environments. In this paper, we present FastUMI-100K, a large-scale UMI-style multimodal demonstration dataset, designed to overcome these limitations and meet the growing complexity of real-world manipulation tasks. Collected by FastUMI, a novel robotic system featuring a modular, hardware-decoupled mechanical design and an integrated lightweight tracking system, FastUMI-100K offers a more scalable, flexible, and adaptable solution to fulfill the diverse requirements of real-world robot demonstration data. Specifically, FastUMI-100K contains over 100K+ demonstration trajectories collected across representative household environments, covering 54 tasks and hundreds of object types. Our dataset integrates multimodal streams, including end-effector states, multi-view wrist-mounted fisheye images and textual annotations. Each trajectory has a length ranging from 120 to 500 frames. Experimental results demonstrate that FastUMI-100K enables high policy success rates across various baseline algorithms, confirming its robustness, adaptability, and real-world applicability for solving complex, dynamic manipulation challenges. The source code and dataset will be released in this link https://github.com/MrKeee/FastUMI-100K.

Instructing a robot to complete an everyday task within our homes has been a long-standing challenge for robotics. While recent progress in language-conditioned imitation learning and offline reinforcement learning has demonstrated impressive performance across a wide range of tasks, they are typically limited to short-horizon tasks -- not reflective of those a home robot would be expected to complete. While existing architectures have the potential to learn these desired behaviours, the lack of the necessary long-horizon, multi-step datasets for real robotic systems poses a significant challenge. To this end, we present the Long-Horizon Manipulation (LHManip) dataset comprising 200 episodes, demonstrating 20 different manipulation tasks via real robot teleoperation. The tasks entail multiple sub-tasks, including grasping, pushing, stacking and throwing objects in highly cluttered environments. Each task is paired with a natural language instruction and multi-camera viewpoints for point-cloud or NeRF reconstruction. In total, the dataset comprises 176,278 observation-action pairs which form part of the Open X-Embodiment dataset. The full LHManip dataset is made publicly available at https://github.com/fedeceola/LHManip.

Humanoid whole-body teleoperation translates human motion into stable robot behavior in real time. Existing systems typically rely on online motion retargeting to bridge human--robot morphological differences, but this process adds latency and can produce physically infeasible targets. Meanwhile, diverse, noisy, and partial human-motion observations often fall outside the training distribution, potentially causing unstable robot behavior. We propose a retargeting-free policy that maps raw human motion directly to robot joint commands in a single forward pass, eliminating online kinematic adaptation. To improve robustness, we learn a codebook of full-body motion primitives that projects out-of-distribution observations onto plausible motion prototypes and recovers full-body motion from partial inputs. Experiments on a Unitree~G1 in simulation and on hardware, using virtual reality, optical mocap, text-to-motion generation, and monocular video inputs, show that our method outperforms baselines in latency and robustness.

Learning-based controllers, such as diffusion policies and vision-language action models, often generate low-frequency or discontinuous robot state changes. Achieving smooth reference tracking requires a low-level controller that converts high-level targets commands into joint torques, enabling compliant behavior during contact interactions. We present CRISP, a lightweight C++ implementation of compliant Cartesian and joint-space controllers for the ROS2 control standard, designed for seamless integration with high-level learning-based policies as well as teleoperation. The controllers are compatible with any manipulator that exposes a joint-torque interface. Through our Python and Gymnasium interfaces, CRISP provides a unified pipeline for recording data from hardware and simulation and deploying high-level learning-based policies seamlessly, facilitating rapid experimentation. The system has been validated on hardware with the Franka Robotics FR3 and in simulation with the Kuka IIWA14 and Kinova Gen3. Designed for rapid integration, flexible deployment, and real-time performance, our implementation provides a unified pipeline for data collection and policy execution, lowering the barrier to applying learning-based methods on ROS2-compatible manipulators. Detailed documentation is available at the project website - https://utiasDSL.github.io/crisp_controllers.

In this work, we study how to build a robotic system that can solve multiple 3D manipulation tasks given language instructions. To be useful in industrial and household domains, such a system should be capable of learning new tasks with few demonstrations and solving them precisely. Prior works, like PerAct and RVT, have studied this problem, however, they often struggle with tasks requiring high precision. We study how to make them more effective, precise, and fast. Using a combination of architectural and system-level improvements, we propose RVT-2, a multitask 3D manipulation model that is 6X faster in training and 2X faster in inference than its predecessor RVT. RVT-2 achieves a new state-of-the-art on RLBench, improving the success rate from 65% to 82%. RVT-2 is also effective in the real world, where it can learn tasks requiring high precision, like picking up and inserting plugs, with just 10 demonstrations. Visual results, code, and trained model are provided at: https://robotic-view-transformer-2.github.io/.

We hand the community HAND, a simple and time-efficient method for teaching robots new manipulation tasks through human hand demonstrations. Instead of relying on task-specific robot demonstrations collected via teleoperation, HAND uses easy-to-provide hand demonstrations to retrieve relevant behaviors from task-agnostic robot play data. Using a visual tracking pipeline, HAND extracts the motion of the human hand from the hand demonstration and retrieves robot sub-trajectories in two stages: first filtering by visual similarity, then retrieving trajectories with similar behaviors to the hand. Fine-tuning a policy on the retrieved data enables real-time learning of tasks in under four minutes, without requiring calibrated cameras or detailed hand pose estimation. Experiments also show that HAND outperforms retrieval baselines by over 2x in average task success rates on real robots. Videos can be found at our project website: https://liralab.usc.edu/handretrieval/.

Recent advancements in imitation learning have shown promising results in robotic manipulation, driven by the availability of high-quality training data. To improve data collection efficiency, some approaches focus on developing specialized teleoperation devices for robot control, while others directly use human hand demonstrations to obtain training data. However, the former requires both a robotic system and a skilled operator, limiting scalability, while the latter faces challenges in aligning the visual gap between human hand demonstrations and the deployed robot observations. To address this, we propose a human hand data collection system combined with our hand-to-gripper generative model, which translates human hand demonstrations into robot gripper demonstrations, effectively bridging the observation gap. Specifically, a GoPro fisheye camera is mounted on the human wrist to capture human hand demonstrations. We then train a generative model on a self-collected dataset of paired human hand and UMI gripper demonstrations, which have been processed using a tailored data pre-processing strategy to ensure alignment in both timestamps and observations. Therefore, given only human hand demonstrations, we are able to automatically extract the corresponding SE(3) actions and integrate them with high-quality generated robot demonstrations through our generation pipeline for training robotic policy model. In experiments, the robust manipulation performance demonstrates not only the quality of the generated robot demonstrations but also the efficiency and practicality of our data collection method. More demonstrations can be found at: https://rwor.github.io/

Developing robust and general-purpose robotic manipulation policies is a key goal in the field of robotics. To achieve effective generalization, it is essential to construct comprehensive datasets that encompass a large number of demonstration trajectories and diverse tasks. Unlike vision or language data that can be collected from the Internet, robotic datasets require detailed observations and manipulation actions, necessitating significant investment in hardware-software infrastructure and human labor. While existing works have focused on assembling various individual robot datasets, there remains a lack of a unified data collection standard and insufficient diversity in tasks, scenarios, and robot types. In this paper, we introduce RoboMIND (Multi-embodiment Intelligence Normative Data for Robot manipulation), featuring 55k real-world demonstration trajectories across 279 diverse tasks involving 61 different object classes. RoboMIND is collected through human teleoperation and encompasses comprehensive robotic-related information, including multi-view RGB-D images, proprioceptive robot state information, end effector details, and linguistic task descriptions. To ensure dataset consistency and reliability during policy learning, RoboMIND is built on a unified data collection platform and standardized protocol, covering four distinct robotic embodiments. We provide a thorough quantitative and qualitative analysis of RoboMIND across multiple dimensions, offering detailed insights into the diversity of our datasets. In our experiments, we conduct extensive real-world testing with four state-of-the-art imitation learning methods, demonstrating that training with RoboMIND data results in a high manipulation success rate and strong generalization. Our project is at https://x-humanoid-robomind.github.io/.

This work presents a novel online model-predictive trajectory planner for robotic manipulators called BoundMPC. This planner allows the collision-free following of Cartesian reference paths in the end-effector's position and orientation, including via-points, within desired asymmetric bounds of the orthogonal path error. The path parameter synchronizes the position and orientation reference paths. The decomposition of the path error into the tangential direction, describing the path progress, and the orthogonal direction, which represents the deviation from the path, is well known for the position from the path-following control in the literature. This paper extends this idea to the orientation by utilizing the Lie theory of rotations. Moreover, the orthogonal error plane is further decomposed into basis directions to define asymmetric Cartesian error bounds easily. Using piecewise linear position and orientation reference paths with via-points is computationally very efficient and allows replanning the pose trajectories during the robot's motion. This feature makes it possible to use this planner for dynamically changing environments and varying goals. The flexibility and performance of BoundMPC are experimentally demonstrated by two scenarios on a 7-DoF Kuka LBR iiwa 14 R820 robot. The first scenario shows the transfer of a larger object from a start to a goal pose through a confined space where the object must be tilted. The second scenario deals with grasping an object from a table where the grasping point changes during the robot's motion, and collisions with other obstacles in the scene must be avoided.

Recent advances in large-scale pretrained vision-language-action models have improved robot policy learning, but directly deploying such policies in user-specific environments remains challenging due to limited generalization, which inevitably requires collecting a dataset tailored to the target environment. Teleoperation yields well-aligned data but is costly and difficult to scale, whereas simulation scales easily but struggles to resemble the target environment and generate task-specific trajectories. To meet both simultaneously, we propose PRISM, an end-to-end pipeline that generates personalized robotic datasets from a single image and a natural-language instruction. PRISM constructs digital cousin scenes that are semantically and geometrically aligned with the user environment yet diverse at the instance level, and synthesizes executable demonstrations without human teleoperation. Extensive experiments show that policies trained on PRISM-generated datasets outperform those trained on baseline-generated datasets on LIBERO and LIBERO-Plus, achieve up to 100\% success rate on three real-world manipulation tasks, and maintain stronger performance when evaluated in environments that differ from those seen during training.

Universal Manipulation Interface (UMI) devices allow human experts to demonstrate tasks for robot learning without teleoperating physical robots. Using these demonstrations as training data still requires a consistent hardware setup, calibration, and data processing. We present UMI-Live, a full-stack open-source bimanual UMI system for in-the-wild data collection. We design our custom UMI-Live hardware to integrate camera and LiDAR--inertial sensing, onboard compute, and power, without external tracking equipment or calibration within the collection environment. We implement a simple user interface for recording data while an asynchronous pipeline performs parallel SLAM reconstruction and publishes training-ready datasets. We also release software that supports dual-YAM teleoperation and VLA policy training and inference. We validate UMI-Live data quality by fine-tuning π_{0.5} and MolmoAct2, achieving success rates of 10/10 and 8/10, respectively on a bimanual pick-and-place task. Furthermore, we release 40 hours of UMI-Live data across three tasks, and complete hardware designs, software, and reproduction guides at our https://umi-live.github.io/{project website}.

Robotic foundation models pre-trained on human demonstration videos have shown promise, but a significant embodiment gap remains when the resulting policies are deployed on real robots. A common remedy is to fine-tune these models on robot-specific demonstrations. However, robot data collection can be prohibitively expensive and time-consuming, which is particularly acute in dexterous manipulation, e.g., teleoperating a multi-fingered hand for even a single atomic task can take days. To address this, we introduce Dexterous Point Policy, a framework that learns dexterous manipulation policies directly from human videos and requires no robot demonstrations. Our core insight is that a unified 3D keypoint representation can bridge human and robot embodiments when used for both observations and actions. Specifically, we extract 3D keypoints of task-relevant objects and human hands from raw videos, and train an autoregressive transformer over these keypoints. We observe that at the keypoint level, specifically the wrist and fingertips, human and robot behaviors closely align, enabling direct policy transfer. On a suite of real-robot tasks spanning pick-and-place and tool use, Dexterous Point Policy attains 75.0% success, whereas a state-of-the-art VLA baseline reaches only 1.0%. Furthermore, our method generalizes strongly to unseen scenarios, including multi-object environments and novel object categories.

Mobile manipulators such as humanoid robots are increasingly deployed in dynamic, unstructured environments to perform dexterous manipulation tasks. However, end-to-end manipulation policies trained to imitate demonstration data collected from a single robot pose are brittle: even centimeter-scale deviations in robot pose at deployment can drive ego-centric observations and end-effector trajectories out of the training distribution, leading to sharp drops in performance. We introduce MobileVISTA, a data generation framework that transforms demonstrations captured at canonical poses into diverse, pose-perturbed training data by jointly (1) augmenting egocentric visual observations and (2) retargeting actions to compensate for base pose changes. Unlike prior methods, which assume a camera rigidly mounted off the actuated chain or non-trivial articulated robot geometry largely out of frame, MobileVISTA targets compatibility with egocentric platforms (e.g., humanoids) where the camera is both influenced by and must observe the robot's kinematic chain as it moves. We study MobileVISTA in simulated tasks spanning humanoid and bimanual embodiments, and on a real Galaxea R1 Pro. We find policies trained on MobileVISTA-augmented data demonstrate improved robustness to previously out-of-distribution poses encountered at test time, without additional demonstration collection or a trained generative model. Additionally, we find MobileVISTA's benefit is largest on tested humanoids, where the camera rides the actuated chain and the robot fills much of the frame. Additional videos and appendix can be found on our website: https://mobilevista.github.io

Learned policies trained end-to-end on large datasets often remain brittle in high-precision tasks and struggle with generalization. We find that these limitations largely stem from a lack of structure and focus in data collection. Our key insight is to leverage dense data collection only for the critical segment of contact-rich tasks and to rely on traditional planning during simple free-space motion. We propose an automated data-collection scheme in combination with offline deep reinforcement learning for the critical segment of the task, eliminating reliance on a teleoperator's skill and on online policy updates. Across four challenging real-world tasks, using only 2 to 2.5 hours of autonomous data collection, we achieve an average success rate of 96%, compared to the strongest baseline at 55%. Notably, performance remains high in out-of-distribution scenarios where end-to-end approaches struggle. Our results pave the way for targeted data collection for contact-rich tasks and for high success rates in precision applications.

Learning deployable manipulation policies is bottlenecked by the scarcity of data that is both high-fidelity and scalable. Real-robot teleoperation is accurate but costly to scale; robot-free UMI capture scales readily, and current practice uses the resulting data mainly for pre-training, adding a small real-robot "anchor" at post-training. We ask whether raising the fidelity of robot-free UMI data, rather than shrinking the real-robot fraction, can remove that anchor. We present HiFi-UMI, a portable UMI data-production system co-designed for trajectory accuracy, inter-gripper relative pose, synchronization, and field of view: head-mounted offline stereo-inertial SLAM, native rather than reconstructed relative pose, a shared microsecond GPIO trigger, and two wide-angle cameras per hand covering ~200 degrees. It reaches 3 mm workspace-local end-effector accuracy without external tracking infrastructure. Using this corpus, we demonstrate zero-robot post-training: a policy post-trained solely on HiFi-UMI demonstrations deploys directly on a real robot and matches in-domain teleoperation across three backbones spanning the vision-language-action and world-action-model families, with success-rate differences of -2.5, +3.1, and -0.6 percentage points on StarVLA-QwenPI, OpenPI-pi_0.5, and LingBot-VA; the strongest policy reaches 85% on a precision insertion task, even though the teleoperation baseline is collected in the evaluation scene and no HiFi-UMI trajectory is. Pre-training on 4,000 hours from the same corpus lowers action error on ten unseen tasks by 41% and, on StarVLA-QwenPI, raises real-robot success by a further 18.1 percentage points. We open-source HiFi-UMI-2K, 2,000 hours of microsecond-synchronized, ultra-wide-FoV demonstrations, each automatically reconstructed and validated through simulation replay, as a large-scale, high-fidelity resource for the robot-learning community.

Whole-body humanoid manipulation of bulky, deformable, and shared-load objects requires distributed contact sensing and explicit force regulation, yet most imitation policies treat contact force only implicitly. On the other hand, different demonstration sources provide complementary modalities with inherent trade-offs: human demonstrations capture natural contact forces but not robot-executable actions, while teleoperation directly records robot actions but with less natural force regulation. This paper presents WT-UMI, a wearable whole-body tactile interface worn by human operators or mounted on humanoids, providing accurate observations of tactile images, contact forces, and end-effector poses across both human demonstration and humanoid teleoperation modes. We introduce a force-conditioned target-pose correction module that converts measured human poses into contact-aware robot targets by learning corrections from teleoperation data. To leverage the natural force interaction in human data, we propose a force-supervised planner that predicts end-effector pose chunks and contact-force trajectories. The predicted contact force serves as the reference for a tactile-based admittance controller. Across five contact-rich tasks spanning deformable objects, bulky rigid objects, and human--humanoid collaboration, WT-UMI improves success rate and reduces contact-position tracking error over four policy baselines. Our project page is available at https://wt-umi.github.io/WTUMI/.

Dexterous manipulation requires tactile feedback. However, robot tactile demonstrations are difficult to scale,because dexterous-hand teleoperation provides limited tactile feedback to the operator. In contrast, human demonstrations offer a substantially more scalable source of diverse tactile interactions. Motivated by a simple premise: hands can change, but the underlying physics of interaction does not. We leverage human tactile data to improve dexterous manipulation policies. Specifically, we first build a tactile motion-capture system that synchronously records images, tactile signals, and hand motions. Using this system, we construct the UVTA dataset spanning five contact-rich tasks, with 1,000 human demonstrations covering diverse interaction patterns and 150 robot demonstrations per task. To transfer the underlying physics of human interaction to robot control, we propose a Unified Visual-Tactile-Action Model that maps both embodiments into aligned tactile and action representations and jointly predicts future action and tactile trajectories. The joint objective enables human demonstrations to supervise contact-aware representation learning, while only robot actions are executed during deployment. In real-robot evaluations across five tasks, our method achieves an average success rate of 70%, outperforming the strongest visual-tactile baseline, which achieves 29%, and an architecture ablation, which achieves 42%. Performance improves consistently with additional human demonstrations and exhibits no saturation at 1,000 demonstrations per task, validating the effectiveness of scalable human tactile data for dexterous manipulation. Project page is available at https://uni-vta.github.io/.

Vision-Language-Action (VLA) models have demonstrated strong generalization in robotic manipulation, yet existing evaluations are primarily conducted in simulation or on expensive robotic platforms, leaving their robustness on affordable real-world robots largely unexplored. We present a standardized real-world benchmark for evaluating representative VLA and imitation learning policies on the low-cost SO-101 robotic platform. The benchmark comprises four representative manipulation tasks together with unified evaluation protocols, enabling systematic comparison under embodiment uncertainty. Using real-world teleoperated demonstrations, we fine-tune and evaluate π_{0.5}, SmolVLA, Wall-X, and ACT directly on the physical platform. Beyond conventional task success rates, the benchmark incorporates a structured failure taxonomy, semantic- and execution-level failure decomposition, and recovery-aware evaluation metrics to characterize policy robustness. Experimental results show that stronger pretrained VLA policies generally outperform the imitation learning baseline, although performance remains highly task-dependent under low-cost robotic deployment conditions. Execution instability emerges as the dominant failure source, while recovery capability varies substantially across architectures. These results highlight the importance of failure and recovery analysis beyond binary task success and establish SO-101 as a practical benchmark for evaluating embodied AI systems under realistic low-cost robotic deployment conditions.

Robotic grasp and manipulation taxonomies, inspired by observing human manipulation strategies, can provide key guidance for tasks ranging from robotic gripper design to the development of manipulation algorithms. The existing grasp and manipulation taxonomies, however, often assume object rigidity, which limits their ability to reason about the complex interactions in the robotic manipulation of deformable objects. Hence, to assist in tasks involving deformable objects, taxonomies need to capture more comprehensively the interactions inherent in deformable object manipulation. To this end, we introduce T-DOM, a taxonomy that analyses key aspects involved in the manipulation of deformable objects, such as robot motion, forces, prehensile and non-prehensile interactions and, for the first time, a detailed classification of object deformations. To evaluate T-DOM, we curate a dataset of ten tasks involving a variety of deformable objects, such as garments, ropes, and surgical gloves, as well as diverse types of deformations. We analyse the proposed tasks comparing the T-DOM taxonomy with previous well established manipulation taxonomies. Our analysis demonstrates that T-DOM can effectively distinguish between manipulation skills that were not identified in other taxonomies, across different deformable objects and manipulation actions, offering new categories to characterize a skill. The proposed taxonomy significantly extends past work, providing a more fine-grained classification that can be used to describe the robotic manipulation of deformable objects. This work establishes a foundation for advancing deformable object manipulation, bridging theoretical understanding and practical implementation in robotic systems.

Behavior cloning for robot manipulation relies on expert demonstrations. However, for tasks that require dynamic stability, precise contact timing, or dexterous coordination, human operators may find it hard or even impossible to collect data. We study this infeasible-demonstration regime and propose GLIDE: Guardrails for Learning from Infeasible Demonstrations Efficiently, a framework that infers task-specific failure modes and converts them into executable guardrails for data collection and policy deployment. Given a task description and the conditioning teleoperation code, GLIDE writes guardrails that use system states to filter teleoperation and policy commands, constrain failure-prone actions, and iteratively improve from trajectory feedback. Across three tasks, GLIDE discovers emergent guardrails that go beyond domain-expert hardcoded ones, improving data collection over naive VR teleoperation and domain-expert hardcoded guardrails. After refinement, GLIDE raises data-collection success from 0-10 percent to 70-90 percent across the three tasks. During policy execution, mixed-data guarded policies reach 70 percent, 60 percent, and 60 percent success on Tomato plate transfer, Marker handover and stand, and Wine serving tasks. These results show that GLIDE can support policy learning when direct demonstrations are infeasible. Project website: http://guardrail-policy.github.io/