Daily Papers

Efficiency, as a critical practical challenge for LLM-driven agentic and reasoning systems, is increasingly constrained by the inherent latency of autoregressive (AR) decoding. Speculative decoding mitigates this cost through a draft-verify scheme, yet existing approaches rely on AR draft models (a.k.a., drafters), which introduce two fundamental issues: (1) step-wise uncertainty accumulation leads to a progressive collapse of trust between the target model and the drafter, and (2) inherently sequential decoding of AR drafters. Together, these factors cause limited speedups. In this paper, we show that a diffusion large language model (dLLM) drafters can naturally overcome these issues through its fundamentally different probabilistic modeling and efficient parallel decoding strategy. Building on this insight, we introduce DEER, an efficient speculative decoding framework that drafts with diffusion and verifies with AR models. To enable high-quality drafting, DEER employs a two-stage training pipeline to align the dLLM-based drafters with the target AR model, and further adopts single-step decoding to generate long draft segments. Experiments show DEER reaches draft acceptance lengths of up to 32 tokens, far surpassing the 10 tokens achieved by EAGLE-3. Moreover, on HumanEval with Qwen3-30B-A3B, DEER attains a 5.54x speedup, while EAGLE-3 achieves only 2.41x. Code, model, demo, etc, will be available at https://czc726.github.io/DEER/

The immense model sizes of large language models (LLMs) challenge deployment on memory-limited consumer GPUs. Although model compression and parameter offloading are common strategies to address memory limitations, compression can degrade quality, and offloading maintains quality but suffers from slow inference. Speculative decoding presents a promising avenue to accelerate parameter offloading, utilizing a fast draft model to propose multiple draft tokens, which are then verified by the target LLM in parallel with a single forward pass. This method reduces the time-consuming data transfers in forward passes that involve offloaded weight transfers. Existing methods often rely on pretrained weights of the same family, but require additional training to align with custom-trained models. Moreover, approaches that involve draft model training usually yield only modest speedups. This limitation arises from insufficient alignment with the target model, preventing higher token acceptance lengths. To address these challenges and achieve greater speedups, we propose SubSpec, a plug-and-play method to accelerate parameter offloading that is lossless and training-free. SubSpec constructs a highly aligned draft model by generating low-bit quantized substitute layers from offloaded target LLM portions. Additionally, our method shares the remaining GPU-resident layers and the KV-Cache, further reducing memory overhead and enhance alignment. SubSpec achieves a high average acceptance length, delivering 9.1x speedup for Qwen2.5 7B on MT-Bench (8GB VRAM limit) and an average of 12.5x speedup for Qwen2.5 32B on popular generation benchmarks (24GB VRAM limit).

Large Language Models (LLMs), constrained by their auto-regressive nature, suffer from slow decoding. Speculative decoding methods have emerged as a promising solution to accelerate LLM decoding, attracting attention from both systems and AI research communities. Recently, the pursuit of better draft quality has driven a trend toward parametrically larger draft models, which inevitably introduces substantial computational overhead. While existing work attempts to balance the trade-off between prediction accuracy and compute latency, we address this fundamental dilemma through architectural innovation. We propose PRISM, which disaggregates the computation of each predictive step across different parameter sets, refactoring the computational pathways of draft models to successfully decouple model capacity from inference cost. Through extensive experiments, we demonstrate that PRISM outperforms all existing draft architectures, achieving exceptional acceptance lengths while maintaining minimal draft latency for superior end-to-end speedup. We also re-examine scaling laws with PRISM, revealing that PRISM scales more effectively with expanding data volumes than other draft architectures. Through rigorous and fair comparison, we show that PRISM boosts the decoding throughput of an already highly optimized inference engine by more than 2.6x.

Speculative decoding reduces the inference latency of a target large language model via utilizing a smaller and faster draft model. Its performance depends on a hyperparameter K -- the candidate length, i.e., the number of candidate tokens for the target model to verify in each round. However, previous methods often use simple heuristics to choose K, which may result in sub-optimal performance. We study the choice of the candidate length K and formulate it as a Markov Decision Process. We theoretically show that the optimal policy of this Markov decision process takes the form of a threshold policy, i.e., the current speculation should stop and be verified when the probability of getting a rejection exceeds a threshold value. Motivated by this theory, we propose SpecDec++, an enhanced version of speculative decoding that adaptively determines the candidate length on the fly. We augment the draft model with a trained acceptance prediction head to predict the conditional acceptance probability of the candidate tokens. SpecDec++ will stop the current speculation when the predicted probability that at least one token gets rejected exceeds a threshold. We implement SpecDec++ and apply it to the llama-2-chat 7B & 70B model pair. Our adaptive method achieves a 2.04x speedup on the Alpaca dataset (an additional 7.2% improvement over the baseline speculative decoding). On the GSM8K and HumanEval datasets, our method achieves a 2.26x speedup (9.4% improvement) and 2.23x speedup (11.1% improvement), respectively.

Speculative Decoding (SD) has become an important technique in accelerating the inference speed of large language models. Conventional SD methods employ a fixed draft length, which ignores the token generation difficulty across tasks. Consequently, in this paper, we address such an issue and introduce SVIP - a difficulty-aware dynamic draft length policy for speculative decoding systems. Based on a theoretical lower bound of draft token acceptance rate and its inference-time approximation, SVIP adaptively determines the lengths of draft sequences based on the entropy of each draft token distribution. Experimental results on mainstream SD benchmarks and frameworks demonstrate the superior performance of SVIP, achieving up to 20\% walltime speedup on SpecBench over baseline SD methods and 60\% speedup on MT-Bench for long-form generation of up to 8K tokens. Moreover, SVIP is totally training-free and compatible with any existing SD methods that generate draft tokens autoregressively. Experimental results also show that SVIP yields consistent walltime improvement on top of GliDe & CaPE and EAGLE-2.

Speculative decoding accelerates large language model (LLM) inference by using a small draft model to propose candidate tokens that a larger target model verifies. A critical hyperparameter in this process is the speculation length γ, which determines how many tokens the draft model proposes per step. Nearly all existing systems use a fixed γ (typically 4), yet empirical evidence suggests that the optimal value varies across task types and, crucially, depends on the compression level applied to the target model. In this paper, we present SpecKV, a lightweight adaptive controller that selects γ per speculation step using signals extracted from the draft model itself. We profile speculative decoding across 4 task categories, 4 speculation lengths, and 3 compression levels (FP16, INT8, NF4), collecting 5,112 step-level records with per-step acceptance rates, draft entropy, and draft confidence. We demonstrate that the optimal γ shifts across compression regimes and that draft model confidence and entropy are strong predictors of acceptance rate (correlation approx 0.56). SpecKV uses a small MLP trained on these signals to maximize expected tokens per speculation step, achieving a 56.0% improvement over the fixed-γ=4 baseline with only 0.34 ms overhead per decision (<0.5% of step time). The improvement is statistically significant (p < 0.001, paired bootstrap test). We release all profiling data, trained models, and notebooks as open-source artifacts.

Speculative decoding accelerates large language model inference by proposing tokens with a lightweight draft model and selectively accepting them using a target model. This work introduces DropMatch, a novel approach that matches draft tokens to the predictive distribution of the target model via Monte Carlo dropout applied exclusively to the LM head, enabling sampling-based acceptance decisions. By generating multiple decoding paths, our method forms an empirical token distribution against which draft tokens are evaluated for consistency. This acceptance mechanism enables the model to adaptively control the size of decoding paths under an appropriate dropout probability, preventing substantial distortion of the target model predictive distribution. The proposed method operates in a training-free, data-free, and calibration-free manner, requires no architectural modification to pretrained models, and can be orthogonally integrated with a wide range of existing speculative decoding and inference acceleration techniques. Experiments across multiple benchmarks demonstrate that our approach increases acceptance length while maintaining competitive task performance, yielding inference speedups ranging from 1.09x to 1.33x over the standard baseline, and up to an additional 1.09x speedup when applied on top of EAGLE3.

Speculative decoding accelerates autoregressive large language model (LLM) inference by using a lightweight draft model to propose candidate tokens that are then verified in parallel by the target model. The speedup is significantly determined by the acceptance rate, yet standard training minimizes Kullback-Leibler (KL) divergence as a proxy objective. While KL divergence and acceptance rate share the same global optimum, small draft models, having limited capacity, typically converge to suboptimal solutions where minimizing KL does not guarantee maximizing acceptance rate. To address this issue, we propose LK losses, special training objectives that directly target acceptance rate. Comprehensive experiments across four draft architectures and six target models, ranging from 8B to 685B parameters, demonstrate consistent improvements in acceptance metrics across all configurations compared to the standard KL-based training. We evaluate our approach on general, coding and math domains and report gains of up to 8-10% in average acceptance length. LK losses are easy to implement, introduce no computational overhead and can be directly integrated into any existing speculator training framework, making them a compelling alternative to the existing draft training objectives.

Speculative decoding accelerates autoregressive generation by letting a lightweight draft model propose future tokens that a larger target model then verifies in parallel. In practice, however, draft models are usually trained on broad generic corpora, which leaves it unclear how much speculative decoding quality depends on the draft training distribution. We study this question with lightweight HASS and EAGLE-2 drafters trained on MathInstruct, ShareGPT, and mixed-data variants, evaluated on MT-Bench, GSM8K, MATH-500, and SVAMP. Measured by acceptance length, task-specific training yields clear specialization: MathInstruct-trained drafts are strongest on reasoning benchmarks, while ShareGPT-trained drafts are strongest on MT-Bench. Mixed-data training improves robustness, but larger mixtures do not dominate across decoding temperatures. We also study how to combine specialized drafters at inference time. Naive checkpoint averaging performs poorly, whereas confidence-based routing improves over single-domain drafts and merged-tree verification yields the highest acceptance length overall for both backbones. Finally, confidence is a more useful routing signal than entropy: rejected tokens tend to have higher entropy, but confidence produces much clearer benchmark-level routing decisions. These results show that speculative decoding quality depends not only on draft architecture, but also on the match between draft training data and downstream workload, and that specialized drafters are better combined at inference time than in weight space.

Speculative decoding accelerates LLM inference by drafting future tokens with a small model, but drafter models degrade sharply under template perturbation and long-context inputs. We identify a previously-unreported phenomenon we call attention drift: as the drafter generates successive tokens within a speculation chain, attention progressively moves from the prompt onto its own recently-generated tokens. We observe this across both EAGLE3 drafters and MTP heads, suggesting drift is a property of drafter designs. We trace this to the un-normalized residual path between chain steps: the drafter's hidden state magnitude grows monotonically with chain depth, which exhibits dynamics consistent with additional pre-norm transformer layers stacked on the target rather than as a standalone autoregressive predictor. In order to limit the growth, we propose two architectural changes: Post-norm on the drafter hidden states and per-hidden-state RMSNorm after capturing target hidden states. Our interventions improve acceptance length over the current leading model, pre-norm EAGLE3, by up to 2times under template perturbation, 1.18times on long-context tasks, and 1.10times on seven standard benchmarks spanning multi-turn chat, math, and coding. Our changes also allow shorter train-time-test depths to generalize over longer drafting sequences.

Recent works have revealed the great potential of speculative decoding in accelerating the autoregressive generation process of large language models. The success of these methods relies on the alignment between draft candidates and the sampled outputs of the target model. Existing methods mainly achieve draft-target alignment with training-based methods, e.g., EAGLE, Medusa, involving considerable training costs. In this paper, we present a training-free alignment-augmented speculative decoding algorithm. We propose alignment sampling, which leverages output distribution obtained in the prefilling phase to provide more aligned draft candidates. To further benefit from high-quality but non-aligned draft candidates, we also introduce a simple yet effective flexible verification strategy. Through an adaptive probability threshold, our approach can improve generation accuracy while further improving inference efficiency. Experiments on 8 datasets (including question answering, summarization and code completion tasks) show that our approach increases the average generation score by 3.3 points for the LLaMA3 model. Our method achieves a mean acceptance length up to 2.39 and speed up generation by 2.23.

Speculative decoding accelerates autoregressive generation by having a cheap draft propose tokens that a target verifies in parallel. Frontier models increasingly ship a built-in Multi-Token-Prediction (MTP/NEXTN) draft head under the assumption that the draft is negligibly cheap. At million-token context this breaks: an MTP draft head typically runs full attention over the entire KV cache at every draft step, so its read grows linearly with context and comes to dominate the draft cost -- precisely where speculation is most valuable. The effect compounds with draft length (a deep native draft can turn net-negative, slower than no speculation) and sharpens under hybrid/linear-attention targets, where cheaper verification leaves the draft's full-attention read exposed. We apply a StreamingLLM-style sliding window plus attention sink to the draft's attention only (Windowed-MTP), leaving full-attention verification intact. It is training-free, drop-in, and lossless by construction: the full-attention target still decides every accepted token, so windowing changes only which tokens are proposed, never which are accepted. It bounds the draft's KV working set to a constant, dropping ~99% of KV entries at 1M. Across three architecture families (Qwen GDN-MoE 35B/122B and a Mamba2-hybrid NoPE 120B) at 1M context on a single GPU in SGLang, windowing cuts the per-decode-step cost over the shipping native MTP draft by +28% to +44%, an input-invariant margin that widens with context. Since per-token latency is this cost divided by acceptance length, at matched acceptance end-to-end decode latency improves by the same amount, and more where windowing also lifts acceptance, while preserving the target's verified output distribution. Finally, the unread draft KV -- 7.7-11% of total KV at 1M -- is reclaimed via a compact ring buffer at no acceptance or quality cost.

Speculative decoding accelerates large language model (LLM) inference by letting a lightweight draft model propose multiple tokens that the target model verifies in parallel. Yet existing training objectives optimize only a single greedy draft path, while decoding follows a tree policy that re-ranks and verifies multiple branches. This draft policy misalignment limits achievable speedups. We introduce Group Tree Optimization (GTO), which aligns training with the decoding-time tree policy through two components: (i) Draft Tree Reward, a sampling-free objective equal to the expected acceptance length of the draft tree under the target model, directly measuring decoding performance; (ii) Group-based Draft Policy Training, a stable optimization scheme that contrasts trees from the current and a frozen reference draft model, forming debiased group-standardized advantages and applying a PPO-style surrogate along the longest accepted sequence for robust updates. We further prove that increasing our Draft Tree Reward provably improves acceptance length and speedup. Across dialogue (MT-Bench), code (HumanEval), and math (GSM8K), and multiple LLMs (e.g., LLaMA-3.1-8B, LLaMA-3.3-70B, Vicuna-1.3-13B, DeepSeek-R1-Distill-LLaMA-8B, Qwen3-8B), GTO increases acceptance length by (7.4%) and yields an additional (7.7%) speedup over prior state-of-the-art EAGLE-3. By bridging draft policy misalignment, GTO offers a practical, general solution for efficient LLM inference. Code and draft models are available at https://github.com/hsj576/GTO.

Speculative decoding accelerates large language model inference without changing the target distribution, but no single drafting structure performs best across real-world workloads. Autoregressive multi-token prediction (MTP) is a lightweight, stable proposal mechanism, whereas block-parallel diffusion amortizes drafting latency over much longer candidate sequences; the better choice depends strongly on the output distribution. We present AngelSpec, a unified training framework for MTP and block-parallel speculative decoding that addresses this heterogeneity at three levels. At the training level, rather than fitting one universal drafter to a uniform data mixture, we co-specialize structure and data: the MTP drafter is trained on diverse conversational data for high-entropy open-ended chat, and the block-diffusion drafter on code and mathematics data for longer predictable continuations. At the architecture level, we propose DFly, a block-diffusion framework combining a hybrid target-conditioning backbone with a predecessor-conditioned autoregressive head, improving target-feature utilization and intra-block dependency modeling while keeping generation parallel. At the inference level, both acceptance length and verification cost vary with domain, request, online load, and hardware, so DFly treats verification as a shared batch-level resource: it reallocates compute toward high-confidence prefixes across requests and combines expected utility with a profiled cost model to adapt verification depth online. Across the Hy3 series, DFly raises the average accepted length on Hy3-A21B by roughly 30% and attains the highest average throughput at every tested concurrency from 4 to 64, a 1.98-2.40x speedup over autoregressive decoding and 10.5-11.8% higher throughput than DFlash. We release AngelSpec to support training and extending these methods.

Speculative decoding accelerates inference in large language models (LLMs) by generating multiple draft tokens simultaneously. However, existing methods often struggle with token misalignment between the training and decoding phases, limiting their performance. To address this, we propose GRIFFIN, a novel framework that incorporates a token-alignable training strategy and a token-alignable draft model to mitigate misalignment. The training strategy employs a loss masking mechanism to exclude highly misaligned tokens during training, preventing them from negatively impacting the draft model's optimization. The token-alignable draft model introduces input tokens to correct inconsistencies in generated features. Experiments on LLaMA-series and Vicuna models demonstrate that GRIFFIN achieves an average acceptance length improvement of over 7\% and a speedup ratio exceeding 8%, outperforming current SoTAs as shown in Fig. 1 (a) and (b).

Autoregressive language models demonstrate excellent performance in various scenarios. However, the inference efficiency is limited by its one-step-one-word generation mode, which has become a pressing problem recently as the models become increasingly larger. Speculative decoding employs a "draft and then verify" mechanism to allow multiple tokens to be generated in one step, realizing lossless acceleration. Existing methods mainly adopt fixed heuristic draft structures, which fail to adapt to different situations to maximize the acceptance length during verification. To alleviate this dilemma, we proposed OPT-Tree, an algorithm to construct adaptive and scalable draft trees. It searches the optimal tree structure that maximizes the mathematical expectation of the acceptance length in each decoding step. Experimental results reveal that OPT-Tree outperforms the existing draft structures and achieves a speed-up ratio of up to 3.2 compared with autoregressive decoding. If the draft model is powerful enough and the node budget is sufficient, it can generate more than ten tokens in a single step. Our code is available at https://github.com/Jikai0Wang/OPT-Tree.

Speculative decoding (SD) accelerates autoregressive Large Language Models (LLMs) by drafting multiple tokens and verifying them in parallel, but it faces a scaling limitation: increasing the draft budget improves speed only when acceptance remains high and drafting overhead stays low. This ceiling has been difficult to break because prior head-based SD methods face a causality-efficiency dilemma. Autoregressive drafters produce path-conditioned candidates that are effective for tree speculative decoding with higher acceptance length, but their drafting cost grows with tree depth. Bidirectional block-diffusion drafters generate all positions in one pass, but their branch-agnostic marginals can form individually plausible yet mutually inconsistent trees, wasting budget and reducing acceptance. We propose JetSpec, a head-based SD framework that combines one-forward drafting efficiency with branch-wise causal conditioning. JetSpec trains a causal parallel draft head over fused hidden states from the frozen target model, producing candidate trees whose scores align with the target model's autoregressive factorization. This enables JetSpec to convert larger draft budgets into longer accepted prefixes and higher end-to-end speedup. Across math, coding, and chat benchmarks on dense and MoE Qwen3 models, JetSpec consistently outperforms bidirectional-head and tree-based SD baselines. On H100 GPUs, JetSpec achieves up to 9.64x speedup on MATH-500 and 4.58x on open-ended conversational workloads, with further latency gains demonstrated through vLLM integration under realistic serving loads. Our code and models are available at https://github.com/hao-ai-lab/JetSpec.

Speculative decoding has proven effective for accelerating inference in Large Language Models (LLMs), yet its extension to Vision-Language Models (VLMs) remains limited by the computational burden and semantic inconsistency introduced by visual tokens. Recent studies reveal that visual tokens in large VLMs are highly redundant, and most of them can be removed without compromising generation quality. Motivated by this observation, we propose HiViS (Hiding Visual Tokens from the Drafter for Speculative Decoding in Vision-Language Models), a framework that utilizes the target VLM as a semantic fusion model, allowing the drafter to obtain visual information without explicitly processing visual tokens, ensuring that the drafter's prefill sequence length matches that of the textual tokens. Furthermore, HiViS employs a time-step-aware aligned training scheme that allows the drafter to autonomously propagate and refine instructive visual-textual semantics during independent drafting, guided by step-dependent bias-correction residuals. Extensive experiments across representative VLMs and benchmarks demonstrate that HiViS achieves significant improvements in average acceptance length and speedup ratio.

Large language models (LLMs) suffer from high inference latency due to the auto-regressive decoding process. Speculative decoding accelerates inference by generating multiple draft tokens using a lightweight model and verifying them in parallel. However, existing verification methods rely heavily on distributional consistency while overlooking semantic correctness, thereby limiting the potential speedup of speculative decoding. While some methods employ additional models for relaxed verification of draft tokens, they often fail to generalize effectively to more diverse or open-domain settings. In this work, we propose Reflective Verification, a training-free and semantics-aware approach that achieves a better trade-off between correctness and efficiency. Specifically, we leverage the inherent reflective capacity of LLMs to semantically assess the correctness of draft tokens in parallel during verification. Using prompt-based probing, we obtain both the original and reflective distributions of draft tokens in a single forward pass. The fusion of these distributions enables semantic-level verification of draft tokens that incorporates both consistency and correctness. Experiments across multiple domain benchmarks and model scales demonstrate that our method significantly increases the acceptance length of draft tokens without compromising model performance. Furthermore, we find that the proposed Reflective Verification is orthogonal to existing statistical verification methods, and their combination yields additional 5sim15\% improvements in decoding speed.

Speculative decoding accelerates large language model inference by pairing a target model with a lightweight draft model whose proposed tokens are verified in parallel. A common way to build draft models, like EAGLE3 or DFlash is supervised fine-tuning (SFT) on target-generated trajectories. However, we observe that SFT quickly plateaus: the draft model's acceptance length on test data stops improving. The reason is an offline-to-inference mismatch: In SFT, the drafter learns from fixed target-generated trajectories, whereas during speculative decoding it is evaluated on blocks proposed under its own policy. This motivates on-policy distillation (OPD), where the target model supervises the drafter on draft-induced states. Yet OPD remains difficult for draft models, as they cannot reliably roll out complete sequences independently, whereas target-assisted generation makes the collected sequences follow the target distribution and thus eliminates the on-policy signal. We therefore propose Draft-OPD, which uses target-assisted rollout for stable continuations and replays drafting from the verification-exposed error positions. This allows the drafter to learn from target feedback on both accepted and rejected proposals, focusing training on the draft-induced errors that limit speculative acceptance. Experiments show that Draft-OPD achieves over 5times lossless acceleration for thinking models across diverse tasks, improving over EAGLE-3 and DFlash by 23\% and 13\%.

Speculative decoding speeds up autoregressive generation in Large Language Models (LLMs) through a two-step procedure, where a lightweight draft model proposes tokens which the target model then verifies in a single forward pass. Although the drafter network is small in modern architectures, its LM-head still performs projection to a large vocabulary, becoming one of the major computational bottlenecks. In prior work this issue has been predominantly addressed via static or dynamic vocabulary truncation. Yet mitigating the bottleneck, these methods bring in extra complexity, such as special vocabulary curation, sophisticated inference-time logic or modifications of the training setup. In this paper, we propose SlimSpec, a low-rank parameterization of the drafter's LM-head that compresses the inner representation rather than the output, preserving full vocabulary support. We evaluate our method with EAGLE-3 drafter across three target models and diverse benchmarks in both latency- and throughput-bound inference regimes. SlimSpec achieves 4-5times acceleration over the standard LM-head architecture while maintaining a competitive acceptance length, surpassing existing methods by up to 8-9% of the end-to-end speedup. Our method requires minimal adjustments of training and inference pipelines. Combined with the aforementioned speedup improvements, it makes SlimSpec a strong alternative across wide variety of draft LM-head architectures.

Speculative decoding accelerates inference in large language models (LLMs) by generating draft tokens for target model verification. Current approaches for obtaining draft tokens rely on lightweight draft models or additional model structures to generate draft tokens and retrieve context from databases. Due to the draft model's small size and limited training data, model-based speculative decoding frequently becomes less effective in out-of-domain scenarios. Additionally, the time cost of the drafting phase results in a low upper limit on acceptance length during the verification step, limiting overall efficiency. This paper proposes RASD (Retrieval-Augmented Speculative Decoding), which adopts retrieval methods to enhance model-based speculative decoding. We introduce tree pruning and tree fusion to achieve this. Specifically, we develop a pruning method based on the draft model's probability distribution to construct the optimal retrieval tree. Second, we employ the longest prefix matching algorithm to merge the tree generated by the draft model with the retrieval tree, resulting in a unified tree for verification. Experimental results demonstrate that RASD achieves state-of-the-art inference acceleration across tasks such as DocQA, Summary, Code, and In-Domain QA. Moreover, RASD exhibits strong scalability, seamlessly integrating with various speculative decoding approaches, including both generation-based and retrieval-based methods.

Using a diffusion model for parallel drafting is a promising approach for speculative decoding. By predicting tokens at multiple future positions in a single forward pass, diffusion drafters substantially reduce drafting latency. However, this shifts the bottleneck to verification: verifying a single sequence limits acceptance length, while verifying large draft trees incurs excessive target-model latency. We identify a key mismatch in existing draft-tree methods: existing diffusion-tree methods rank nodes by the marginal probability, ignoring that verification is prefix-conditioned. As a result, they may verify unreachable descendants of rejected prefixes, increasing latency with limited acceptance gains. To address this, we propose TAPS, a target-aware prefix selection method that turns diffusion marginals into path-conditioned acceptance estimates. TAPS then selects a compact prefix-closed subtree under a fixed verification budget, improving the acceptance-cost tradeoff rather than simply expanding the draft tree. Experiments across diverse datasets and model families demonstrate that TAPS achieves up to 7.9x lossless end-to-end speedup over vanilla autoregressive decoding, outperforming state-of-the-art DFlash and DDTree by 1.36x and 1.74x respectively. Our work is available at https://anonymous.4open.science/r/TAPS-EMNLP2026-53DD

Speculative decoding accelerates Large Language Models (LLMs) inference by using a lightweight draft model to propose candidate tokens that are verified in parallel by the target model. However, existing draft model training objectives are not directly aligned with the inference-time goal of maximizing consecutive token acceptance. To address this issue, we reformulate the draft model optimization objective, shifting the focus from token prediction accuracy to the overall acceptance length. In this paper, we build upon PARD to propose PARD-2, a dual-mode speculative decoding framework with Confidence-Adaptive Token (CAT) optimization. This approach adaptively reweights each token to better align with the verification process. Notably, PARD-2 enables a single draft model to support both target-dependent and target-independent modes. Experiments across diverse models and tasks demonstrate that PARD-2 achieves up to 6.94times lossless acceleration, surpassing EAGLE-3 by 1.9times and PARD by 1.3times on Llama3.1-8B. Our code is available at https://github.com/AMD-AGI/PARD.

Speculative decoding (SD) has become a popular technique to accelerate Large Language Model (LLM) inference, yet its real-world effectiveness remains unclear as prior evaluations rely on research prototypes and unrealistically small batch sizes. We present, to our knowledge, the first systematic study of SD on a production-grade and widely deployed inference engine (vLLM), covering multiple SD variants (n-gram, EAGLE/EAGLE-3, Draft-Model, Multi-Token Prediction) across diverse workloads, model scales, and batch sizes. We analyze key factors governing SD performance, and quantify a theoretical upper bound on SD speedup. Our results show that verification by the target model dominates the execution, while acceptance length varies markedly across output token positions, requests, and datasets. Comparing measured performance with theoretical bounds reveals substantial gaps between observed and theoretical upper bounds, and we leverage this observation to highlight new research opportunities that our study opens up in improving SD.

Speculative decoding is widely used in accelerating large language model (LLM) inference. In this work, we focus on the online draft model selection problem in speculative decoding. We design an algorithm that provably competes with the best draft model in hindsight for each query in terms of either the token acceptance probability or expected acceptance length. In particular, we show that we can accurately evaluate all draft models, instead of only the chosen model without incurring additional queries to the target model, which allows us to improve exponentially over the existing bandit-based approach as the number of draft models increases. Our approach is generically applicable with any speculative decoding methods (single draft, multi-drafts and draft-trees). Moreover, we design system-efficient versions of online learners and demonstrate that the overhead in computation and latency can be substantially reduced. We conduct extensive experiments on open-source LLMs and diverse datasets, demonstrating that our methods substantially outperform the state-of-the-art EAGLE3 and the BanditSpec baseline in a variety of domains where specialized domain-expert drafters are available, especially when long reasoning chains are required.

Speculative decoding accelerates inference by using a lightweight draft model to generate candidate tokens in parallel, and are then verified by the target model, enabling lossless acceleration. Recently, diffusion-based speculative decoding further improves parallelism by generating multiple tokens per forward pass via block-level diffusion, achieving state-of-the-art (SOTA) performance. However, existing methods adopt a fixed inference block size and assume a uniform optimal decoding strategy across all inputs. In this paper, we show that this assumption is suboptimal, as the optimal block size varies across samples and plays a critical role in speculative decoding performance. Moreover, these values exhibit a clear local structure, concentrating around the training block size, which reduces the problem to a low-dimensional and structured decision space. Based on these insights, we propose BlockPilot, a sample-adaptive policy that predicts the optimal block size from the prefilling representation. Specifically, we formulate block size selection as a lightweight policy learning problem and propose an instance-adaptive decision mechanism that predicts the optimal block size based on the representation of the prefilling stage. The prediction is performed only once after prefilling, allowing for seamless integration. Extensive experiments demonstrate that our method is plug-and-play, introduces minimal overhead, and consistently improves efficiency, achieving an acceptance length of 5.92 and a 4.20times speedup on Qwen3-4B under temperature T=1.

We present MiMo-V2-Flash, a Mixture-of-Experts (MoE) model with 309B total parameters and 15B active parameters, designed for fast, strong reasoning and agentic capabilities. MiMo-V2-Flash adopts a hybrid attention architecture that interleaves Sliding Window Attention (SWA) with global attention, with a 128-token sliding window under a 5:1 hybrid ratio. The model is pre-trained on 27 trillion tokens with Multi-Token Prediction (MTP), employing a native 32k context length and subsequently extended to 256k. To efficiently scale post-training compute, MiMo-V2-Flash introduces a novel Multi-Teacher On-Policy Distillation (MOPD) paradigm. In this framework, domain-specialized teachers (e.g., trained via large-scale reinforcement learning) provide dense and token-level reward, enabling the student model to perfectly master teacher expertise. MiMo-V2-Flash rivals top-tier open-weight models such as DeepSeek-V3.2 and Kimi-K2, despite using only 1/2 and 1/3 of their total parameters, respectively. During inference, by repurposing MTP as a draft model for speculative decoding, MiMo-V2-Flash achieves up to 3.6 acceptance length and 2.6x decoding speedup with three MTP layers. We open-source both the model weights and the three-layer MTP weights to foster open research and community collaboration.

Large language models (LLMs) exhibit latent multi-token prediction (MTP) capabilities despite being trained solely for next-token generation. We propose a simple, training-free MTP approach that probes an LLM using on-the-fly mask tokens drawn from its embedding space, enabling parallel prediction of future tokens without modifying model weights or relying on auxiliary draft models. Our method constructs a speculative token tree by sampling top-K candidates from mask-token logits and applies a lightweight pruning strategy to retain high-probability continuations. During decoding, candidate predictions are verified in parallel, resulting in lossless generation while substantially reducing the number of model calls and improving token throughput. Across benchmarks, our probing-based MTP consistently outperforms existing training-free baselines, increasing acceptance length by approximately 12\% on LLaMA3 and 8--12\% on Qwen3, and achieving throughput gains of up to 15--19\%. Finally, we provide theoretical insights and empirical evidence showing that decoder layers naturally align mask-token representations with next-token states, enabling accurate multi-step prediction without retraining or auxiliary models.

Speculative decoding accelerates autoregressive language models by using a lightweight drafter to propose multiple future tokens, which the target model then verifies in parallel. DFlash shows that a block diffusion drafter can generate an entire draft block in a single forward pass and achieve state-of-the-art speculative decoding performance, outperforming strong autoregressive drafters such as EAGLE-3. Vanilla DFlash, however, still verifies only a single drafted trajectory per round, potentially limiting its acceptance length. We introduce DDTree (Diffusion Draft Tree), a method that constructs a draft tree directly from the per-position distributions of a block diffusion drafter. Under a fixed node budget, DDTree uses a simple best-first heap algorithm to select the continuations that are most likely to match the target model according to a surrogate defined by the draft model's output. The resulting tree is verified efficiently in a single target model forward pass using an ancestor-only attention mask. Because DDTree builds on DFlash, a leading draft model for speculative decoding, these gains place DDTree among the leading approaches to speculative decoding.

Speculative decoding accelerates Large Language Model (LLM) inference by using a small draft model to predict multiple tokens, and a large target model to verify these tokens in parallel. Recent studies leverage the hidden state of the target model to enhance draft model prediction accuracy. However, existing methods suffer from the degrading quality of draft token predictions at later positions, due to error accumulation in draft model generated features. In this paper, we propose Position Specialists (PosS), which consist of multiple position-specialized draft layers to generate tokens at assigned position(s). Position specialists greatly improve token acceptance rate at later positions per drafting round, as each specialist only needs to focus on handling a certain level of draft model feature deviation. Experiment results on Llama-3-8B-Instruct and Llama-2-13B-chat across six datasets demonstrate that PosS effectively improves over baselines on average acceptance length and speed-up ratio. Our codebase is available at https://github.com/shrango/PosS.

Speculative decoding (SD) has emerged as a powerful method for accelerating autoregressive generation in large language models (LLMs), yet its integration into vision-language models (VLMs) remains underexplored. We introduce DREAM, a novel speculative decoding framework tailored for VLMs that combines three key innovations: (1) a cross-attention-based mechanism to inject intermediate features from the target model into the draft model for improved alignment, (2) adaptive intermediate feature selection based on attention entropy to guide efficient draft model training, and (3) visual token compression to reduce draft model latency. DREAM enables efficient, accurate, and parallel multimodal decoding with significant throughput improvement. Experiments across a diverse set of recent popular VLMs, including LLaVA, Pixtral, SmolVLM and Gemma3, demonstrate up to 3.6x speedup over conventional decoding and significantly outperform prior SD baselines in both inference throughput and speculative draft acceptance length across a broad range of multimodal benchmarks. The code is publicly available at: https://github.com/SAI-Lab-NYU/DREAM.git

Speculative Decoding (SD) has emerged as a premier technique for accelerating Large Language Model (LLM) inference by decoupling token generation into rapid drafting and parallel verification. While recent advancements in self-speculation and lookahead decoding have successfully minimized drafting overhead, they have shifted the primary performance bottleneck to the verification phase. Since verification requires a full forward pass of the target model, it remains strictly memory-bandwidth bound, fundamentally limiting the maximum achievable speedup.In this paper, we introduce Quasar (Quantized Self-speculative Acceleration for Rapid Inference), a novel, training-free framework designed to overcome this "memory wall" by employing low-bit quantization specifically for the verification stage. Our empirical analysis reveals that while aggressive structural pruning significantly degrades verification accuracy, quantization-based verification preserves the logit distribution with high fidelity while effectively halving memory traffic. Extensive experiments on state-of-the-art models (e.g., OpenPangu and Qwen3) demonstrate that Quasar maintains a speculative acceptance length comparable to full-precision methods while achieving a 1.28times improvement in end-to-end throughput. Being orthogonal to existing drafting strategies, Quasar offers a generic and efficient pathway to accelerate the verification leg of speculative execution. Code is available at https://github.com/Tom-HG/Quasar.

Speculative decoding accelerates autoregressive language model inference by verifying multiple draft tokens in parallel. However, the verification stage often becomes the dominant computational bottleneck, especially for long-context inputs and mixture-of-experts (MoE) models. Existing sparsification methods are designed primarily for standard token-by-token autoregressive decoding to remove substantial computational redundancy in LLMs. This work systematically adopts different sparse methods on the verification stage of the speculative decoding and identifies structured redundancy across multiple dimensions. Based on these observations, we propose a sparse verification framework that jointly sparsifies attention, FFN, and MoE components during the verification stage to reduce the dominant computation cost. The framework further incorporates an inter-draft token and inter-layer retrieval reuse strategy to further reduce redundant computation without introducing additional training. Extensive experiments across summarization, question answering, and mathematical reasoning datasets demonstrate that the proposed methods achieve favorable efficiency-accuracy trade-offs, while maintaining stable acceptance length.

The growth in the number of parameters of Large Language Models (LLMs) has led to a significant surge in computational requirements, making them challenging and costly to deploy. Speculative decoding (SD) leverages smaller models to efficiently propose future tokens, which are then verified by the LLM in parallel. Small models that utilise activations from the LLM currently achieve the fastest decoding speeds. However, we identify several limitations of SD models including the lack of on-policyness during training and partial observability. To address these shortcomings, we propose a more grounded architecture for small models by introducing a Mixture of Attentions for SD. Our novel architecture can be applied in two scenarios: a conventional single device deployment and a novel client-server deployment where the small model is hosted on a consumer device and the LLM on a server. In a single-device scenario, we demonstrate state-of-the-art speedups improving EAGLE-2 by 9.5% and its acceptance length by 25%. In a client-server setting, our experiments demonstrate: 1) state-of-the-art latencies with minimal calls to the server for different network conditions, and 2) in the event of a complete disconnection, our approach can maintain higher accuracy compared to other SD methods and demonstrates advantages over API calls to LLMs, which would otherwise be unable to continue the generation process.

Great successes have been reported using Reinforcement Learning from Human Feedback (RLHF) to align large language models. Open-source preference datasets and reward models have enabled wider experimentation beyond generic chat settings, particularly to make systems more "helpful" for tasks like web question answering, summarization, and multi-turn dialogue. When optimizing for helpfulness, RLHF has been consistently observed to drive models to produce longer outputs. This paper demonstrates that optimizing for response length is a significant factor behind RLHF's reported improvements in these settings. First, we study the relationship between reward and length for reward models trained on three open-source preference datasets for helpfulness. Here, length correlates strongly with reward, and improvements in reward score are driven in large part by shifting the distribution over output lengths. We then explore interventions during both RL and reward model learning to see if we can achieve the same downstream improvements as RLHF without increasing length. While our interventions mitigate length increases, they aren't uniformly effective across settings. Furthermore, we find that even running RLHF with a reward based solely on length can reproduce most of the downstream improvements over the initial policy model, showing that reward models in these settings have a long way to go.

This paper explores the impact of extending input lengths on the capabilities of Large Language Models (LLMs). Despite LLMs advancements in recent times, their performance consistency across different input lengths is not well understood. We investigate this aspect by introducing a novel QA reasoning framework, specifically designed to assess the impact of input length. We isolate the effect of input length using multiple versions of the same sample, each being extended with padding of different lengths, types and locations. Our findings show a notable degradation in LLMs' reasoning performance at much shorter input lengths than their technical maximum. We show that the degradation trend appears in every version of our dataset, although at different intensities. Additionally, our study reveals that traditional perplexity metrics do not correlate with performance of LLMs' in long input reasoning tasks. We analyse our results and identify failure modes that can serve as useful guides for future research, potentially informing strategies to address the limitations observed in LLMs.

LLM-based auto-annotators have become a key component of the LLM development process due to their cost-effectiveness and scalability compared to human-based evaluation. However, these auto-annotators can introduce complex biases that are hard to remove. Even simple, known confounders such as preference for longer outputs remain in existing automated evaluation metrics. We propose a simple regression analysis approach for controlling biases in auto-evaluations. As a real case study, we focus on reducing the length bias of AlpacaEval, a fast and affordable benchmark for chat LLMs that uses LLMs to estimate response quality. Despite being highly correlated with human preferences, AlpacaEval is known to favor models that generate longer outputs. We introduce a length-controlled AlpacaEval that aims to answer the counterfactual question: "What would the preference be if the model's and baseline's output had the same length?". To achieve this, we first fit a generalized linear model to predict the biased output of interest (auto-annotator preferences) based on the mediators we want to control for (length difference) and other relevant features. We then obtain length-controlled preferences by predicting preferences while conditioning the GLM with a zero difference in lengths. Length-controlling not only improves the robustness of the metric to manipulations in model verbosity, we also find that it increases the Spearman correlation with LMSYS' Chatbot Arena from 0.94 to 0.98. We release the code and leaderboard at https://tatsu-lab.github.io/alpaca_eval/ .

LLMs are not generally able to adjust the length of their outputs based on strict length requirements, a capability that would improve their usefulness in applications that require adherence to diverse user and system requirements. We present an approach to train LLMs to acquire this capability by augmenting existing data and applying existing fine-tuning techniques, which we compare based on the trained models' adherence to the length requirement and overall response quality relative to the baseline model. Our results demonstrate that these techniques can be successfully applied to train LLMs to adhere to length requirements, with the trained models generating texts which better align to the length requirements. Our results indicate that our method may change the response quality when using training data that was not generated by the baseline model. This allows simultaneous alignment to another training objective in certain scenarios, but is undesirable otherwise. Training on a dataset containing the model's own responses eliminates this issue.

Large language models (LLMs) are increasingly optimized for long reasoning, under the assumption that more reasoning leads to better performance. However, emerging evidence suggests that longer responses can sometimes degrade accuracy rather than improve it. In this paper, we conduct a systematic empirical study of the relationship between reasoning length and answer correctness. We find that LLMs tend to overthink simple problems, generating unnecessarily long outputs, and underthink harder ones, failing to extend their reasoning when it is most needed. This indicates that models might misjudge problem difficulty and fail to calibrate their response length appropriately. Furthermore, we investigate the effects of length reduction with a preference optimization algorithm when simply preferring the shorter responses regardless of answer correctness. Experiments show that the generation length can be significantly reduced while maintaining acceptable accuracy. Our findings highlight generation length as a meaningful signal for reasoning behavior and motivate further exploration into LLMs' self-awareness in reasoning length adaptation.

The advent of Large Language Models (LLMs) represents a notable breakthrough in Natural Language Processing (NLP), contributing to substantial progress in both text comprehension and generation. However, amidst these advancements, it is noteworthy that LLMs often face a limitation in terms of context length extrapolation. Understanding and extending the context length for LLMs is crucial in enhancing their performance across various NLP applications. In this survey paper, we delve into the multifaceted aspects of exploring why it is essential, and the potential transformations that superior techniques could bring to NLP applications. We study the inherent challenges associated with extending context length and present an organized overview of the existing strategies employed by researchers. Additionally, we discuss the intricacies of evaluating context extension techniques and highlight the open challenges that researchers face in this domain. Furthermore, we explore whether there is a consensus within the research community regarding evaluation standards and identify areas where further agreement is needed. This comprehensive survey aims to serve as a valuable resource for researchers, guiding them through the nuances of context length extension techniques and fostering discussions on future advancements in this evolving field.

Large Language Models have achieved remarkable success in natural language processing tasks, with Reinforcement Learning playing a key role in adapting them to specific applications. However, obtaining ground truth answers for training LLMs in mathematical problem-solving is often challenging, costly, and sometimes unfeasible. This research delves into the utilization of format and length as surrogate signals to train LLMs for mathematical problem-solving, bypassing the need for traditional ground truth answers.Our study shows that a reward function centered on format correctness alone can yield performance improvements comparable to the standard GRPO algorithm in early phases. Recognizing the limitations of format-only rewards in the later phases, we incorporate length-based rewards. The resulting GRPO approach, leveraging format-length surrogate signals, not only matches but surpasses the performance of the standard GRPO algorithm relying on ground truth answers in certain scenarios, achieving 40.0\% accuracy on AIME2024 with a 7B base model. Through systematic exploration and experimentation, this research not only offers a practical solution for training LLMs to solve mathematical problems and reducing the dependence on extensive ground truth data collection, but also reveals the essence of why our label-free approach succeeds: base model is like an excellent student who has already mastered mathematical and logical reasoning skills, but performs poorly on the test paper, it simply needs to develop good answering habits to achieve outstanding results in exams , in other words, to unlock the capabilities it already possesses.

Recently, the large language model (LLM) community has shown increasing interest in enhancing LLMs' capability to handle extremely long documents. As various long-text techniques and model architectures emerge, the precise and detailed evaluation of models' long-text capabilities has become increasingly important. Existing long-text evaluation benchmarks, such as L-Eval and LongBench, construct long-text test sets based on open-source datasets, focusing mainly on QA and summarization tasks. These datasets include test samples of varying lengths (from 2k to 32k+) entangled together, making it challenging to assess model capabilities across different length ranges. Moreover, they do not cover the ultralong settings (100k+ tokens) that the latest LLMs claim to achieve. In this paper, we introduce Ada-LEval, a length-adaptable benchmark for evaluating the long-context understanding of LLMs. Ada-LEval includes two challenging subsets, TSort and BestAnswer, which enable a more reliable evaluation of LLMs' long context capabilities. These benchmarks support intricate manipulation of the length of test cases, and can easily produce text samples up to 128k tokens. We evaluate 4 state-of-the-art closed-source API models and 6 open-source models with Ada-LEval. The evaluation results demonstrate the limitations of current LLMs, especially in ultra-long-context settings. Our code is available at https://github.com/open-compass/Ada-LEval.

Recent large reasoning models (LRMs) driven by reinforcement learning algorithms (e.g., GRPO) have achieved remarkable performance on challenging reasoning tasks. However, these models suffer from overthinking, generating unnecessarily long and redundant reasoning even for simple questions, which substantially increases computational cost and response latency. While existing methods incorporate length rewards to GRPO to promote concise reasoning, they incur significant performance degradation. We identify the root cause: when rewards for correct but long rollouts are penalized, GRPO's group-relative advantage function can assign them negative advantages, actively discouraging valid reasoning. To overcome this, we propose Decoupled Reward Policy Optimization (DRPO), a novel framework that decouples the length-based learning signal of correct rollouts from incorrect ones. DRPO ensures that reward signals for correct rollouts are normalized solely within the positive group, shielding them from interference by negative samples. The DRPO's objective is grounded in integrating an optimized positive data distribution, which maximizes length-based rewards under a KL regularization, into a discriminative objective. We derive a closed-form solution for this distribution, enabling efficient computation of the objective and its gradients using only on-policy data and importance weighting. Of independent interest, this formulation is general and can incorporate other preference rewards of positive data beyond length. Experiments on mathematical reasoning tasks demonstrate DRPO's significant superiority over six efficient reasoning baselines. Notably, with a 1.5B model, our method achieves 77\% length reduction with only 1.1\% performance loss on simple questions like GSM8k dataset, while the follow-up baseline sacrifices 4.3\% for 68\% length reduction.

Large language models (LLMs) struggle with precise length control, particularly in zero-shot settings. We conduct a comprehensive study evaluating LLMs' length control capabilities across multiple measures and propose practical methods to improve controllability. Our experiments with LLaMA 3 reveal stark differences in length adherence across measures and highlight inherent biases of the model. To address these challenges, we introduce a set of methods: length approximation, target adjustment, sample filtering, and automated revisions. By combining these methods, we demonstrate substantial improvements in length compliance while maintaining or enhancing summary quality, providing highly effective zero-shot strategies for precise length control without the need for model fine-tuning or architectural changes. With our work, we not only advance our understanding of LLM behavior in controlled text generation but also pave the way for more reliable and adaptable summarization systems in real-world applications.

State-of-the-art large language models (LLMs) are now claiming remarkable supported context lengths of 256k or even more. In contrast, the average context lengths of mainstream benchmarks are insufficient (5k-21k), and they suffer from potential knowledge leakage and inaccurate metrics, resulting in biased evaluation. This paper introduces LV-Eval, a challenging long-context benchmark with five length levels (16k, 32k, 64k, 128k, and 256k) reaching up to 256k words. LV-Eval features two main tasks, single-hop QA and multi-hop QA, comprising 11 bilingual datasets. The design of LV-Eval has incorporated three key techniques, namely confusing facts insertion, keyword and phrase replacement, and keyword-recall-based metric design. The advantages of LV-Eval include controllable evaluation across different context lengths, challenging test instances with confusing facts, mitigated knowledge leakage, and more objective evaluations. We evaluate 10 LLMs on LV-Eval and conduct ablation studies on the techniques used in LV-Eval construction. The results reveal that: (i) Commercial LLMs generally outperform open-source LLMs when evaluated within length levels shorter than their claimed context length. However, their overall performance is surpassed by open-source LLMs with longer context lengths. (ii) Extremely long-context LLMs, such as Yi-6B-200k, exhibit a relatively gentle degradation of performance, but their absolute performances may not necessarily be higher than those of LLMs with shorter context lengths. (iii) LLMs' performances can significantly degrade in the presence of confusing information, especially in the pressure test of "needle in a haystack". (iv) Issues related to knowledge leakage and inaccurate metrics introduce bias in evaluation, and these concerns are alleviated in LV-Eval. All datasets and evaluation codes are released at: https://github.com/infinigence/LVEval.

In this work, we study the issue of reward hacking on the response length, a challenge emerging in Reinforcement Learning from Human Feedback (RLHF) on LLMs. A well-formatted, verbose but less helpful response from the LLMs can often deceive LLMs or even human evaluators to achieve high scores. The same issue also holds for some reward models in RL. To address the challenges in both training and evaluation, we establish a more reliable evaluation protocol for comparing different training configurations, which inspects the trade-off between LLM evaluation score and response length obtained by varying training hyperparameters. Based on this evaluation, we conduct large-scale studies, where the results shed insights into the efficacy of hyperparameters and tricks used in RL on mitigating length bias. We further propose to improve the reward model by jointly training two linear heads on shared feature representations to predict the rewards, one trained to correlate with length, and the other trained to decorrelate with length and therefore focus more on the actual content. We then discard the length head in RL to prevent reward hacking on length. Experiments demonstrate that our approach almost eliminates the reward correlation with length, and improves the obtained policy by a significant margin.

Token serves as the fundamental unit of computation in modern autoregressive models, and generation length directly influences both inference cost and reasoning performance. Despite its importance, existing approaches lack fine-grained length modeling, operating primarily at the coarse-grained sequence level. We introduce the Length Value Model (LenVM), a token-level framework that models the remaining generation length. By formulating length modeling as a value estimation problem and assigning a constant negative reward to each generated token, LenVM predicts a bounded, discounted return that serves as a monotone proxy for the remaining generation horizon. This formulation yields supervision that is annotation-free, dense, unbiased, and scalable. Experiments on LLMs and VLMs demonstrate LenVM provides a highly effective signal at inference time. On the LIFEBench exact length matching task, applying LenVM to a 7B model improves the length score from 30.9 to 64.8, significantly outperforming frontier closed-source models. Furthermore, LenVM enables continuous control over the trade off between performance and efficiency. On GSM8K at a budget of 200 tokens, LenVM maintains 63% accuracy compared to 6 percent for token budget baseline. It also accurately predicts total generation length from the prompt boundary. Finally, LenVM's token-level values offer an interpretable view of generation dynamics, revealing how specific tokens shift reasoning toward shorter or longer regimes. Results demonstrate that LenVM supports a broad range of applications and token length can be effectively modeled as a token-level value signal, highlighting the potential of LenVM as a general framework for length modeling and as a length-specific value signal that could support future RL training. Code is available at https://github.com/eric-ai-lab/Length-Value-Model.

To enable building and testing models on long-document comprehension, we introduce QuALITY, a multiple-choice QA dataset with context passages in English that have an average length of about 5,000 tokens, much longer than typical current models can process. Unlike in prior work with passages, our questions are written and validated by contributors who have read the entire passage, rather than relying on summaries or excerpts. In addition, only half of the questions are answerable by annotators working under tight time constraints, indicating that skimming and simple search are not enough to consistently perform well. Our baseline models perform poorly on this task (55.4%) and significantly lag behind human performance (93.5%).

In recent years, there have been remarkable advancements in the performance of Transformer-based Large Language Models (LLMs) across various domains. As these LLMs are deployed for increasingly complex tasks, they often face the needs to conduct longer reasoning processes or understanding larger contexts. In these situations, the length generalization failure of LLMs on long sequences become more prominent. Most pre-training schemes truncate training sequences to a fixed length (such as 2048 for LLaMa). LLMs often struggle to generate fluent texts, let alone carry out downstream tasks, after longer contexts, even with relative positional encoding which is designed to cope with this problem. Common solutions such as finetuning on longer corpora often involves daunting hardware and time costs and requires careful training process design. To more efficiently leverage the generation capacity of existing LLMs, we theoretically and empirically investigate the main out-of-distribution (OOD) factors contributing to this problem. Inspired by this diagnosis, we propose a simple yet effective solution for on-the-fly length generalization, LM-Infinite, which involves only a Lambda-shaped attention mask and a distance limit while requiring no parameter updates or learning. We find it applicable to a variety of LLMs using relative-position encoding methods. LM-Infinite is computational efficient with O(n) time and space, and demonstrates consistent fluency and generation quality to as long as 32k tokens on ArXiv and OpenWebText2 datasets, with 2.72x decoding speedup. On downstream task such as passkey retrieval, it continues to work on inputs much longer than training lengths where vanilla models fail immediately.

Recently, recurrent models such as state space models and linear attention have become popular due to their linear complexity in the sequence length. Thanks to their recurrent nature, in principle they can process arbitrarily long sequences, but their performance sometimes drops considerably beyond their training context lengths-i.e. they fail to length generalize. In this work, we provide comprehensive empirical and theoretical analysis to support the unexplored states hypothesis, which posits that models fail to length generalize when during training they are only exposed to a limited subset of the distribution of all attainable states (i.e. states that would be attained if the recurrence was applied to long sequences). Furthermore, we investigate simple training interventions that aim to increase the coverage of the states that the model is trained on, e.g. by initializing the state with Gaussian noise or with the final state of a different input sequence. With only 500 post-training steps (sim 0.1% of the pre-training budget), these interventions enable length generalization for sequences that are orders of magnitude longer than the training context (e.g. 2klongrightarrow 128k) and show improved performance in long context tasks, thus presenting a simple and efficient way to enable robust length generalization in general recurrent models.

Reinforcement learning substantially improves reasoning in large language models, but it also tends to lengthen chain of thought outputs and increase computational cost during both training and inference. Though length control methods have been proposed, it remains unclear what the optimal output length is for balancing efficiency and performance. In this work, we compare several length control methods on two models, Qwen3-1.7B Base and DeepSeek-R1-Distill-Qwen-1.5B. Our results indicate that length penalties may hinder reasoning acquisition, while properly tuned length control can improve efficiency for models with strong prior reasoning. By extending prior work to RL trained policies, we identify two failure modes, 1) long outputs increase dispersion, and 2) short outputs lead to under-thinking.

Diffusion Large Language Models (DLLMs) are emerging as a powerful alternative to the dominant Autoregressive Large Language Models, offering efficient parallel generation and capable global context modeling. However, the practical application of DLLMs is hindered by a critical architectural constraint: the need for a statically predefined generation length. This static length allocation leads to a problematic trade-off: insufficient lengths cripple performance on complex tasks, while excessive lengths incur significant computational overhead and sometimes result in performance degradation. While the inference framework is rigid, we observe that the model itself possesses internal signals that correlate with the optimal response length for a given task. To bridge this gap, we leverage these latent signals and introduce DAEDAL, a novel training-free denoising strategy that enables Dynamic Adaptive Length Expansion for Diffusion Large Language Models. DAEDAL operates in two phases: 1) Before the denoising process, DAEDAL starts from a short initial length and iteratively expands it to a coarse task-appropriate length, guided by a sequence completion metric. 2) During the denoising process, DAEDAL dynamically intervenes by pinpointing and expanding insufficient generation regions through mask token insertion, ensuring the final output is fully developed. Extensive experiments on DLLMs demonstrate that DAEDAL achieves performance comparable, and in some cases superior, to meticulously tuned fixed-length baselines, while simultaneously enhancing computational efficiency by achieving a higher effective token ratio. By resolving the static length constraint, DAEDAL unlocks new potential for DLLMs, bridging a critical gap with their Autoregressive counterparts and paving the way for more efficient and capable generation.

Improvements in language models' capabilities have pushed their applications towards longer contexts, making long-context evaluation and development an active research area. However, many disparate use-cases are grouped together under the umbrella term of "long-context", defined simply by the total length of the model's input, including - for example - Needle-in-a-Haystack tasks, book summarization, and information aggregation. Given their varied difficulty, in this position paper we argue that conflating different tasks by their context length is unproductive. As a community, we require a more precise vocabulary to understand what makes long-context tasks similar or different. We propose to unpack the taxonomy of long-context based on the properties that make them more difficult with longer contexts. We propose two orthogonal axes of difficulty: (I) Diffusion: How hard is it to find the necessary information in the context? (II) Scope: How much necessary information is there to find? We survey the literature on long-context, provide justification for this taxonomy as an informative descriptor, and situate the literature with respect to it. We conclude that the most difficult and interesting settings, whose necessary information is very long and highly diffused within the input, is severely under-explored. By using a descriptive vocabulary and discussing the relevant properties of difficulty in long-context, we can implement more informed research in this area. We call for a careful design of tasks and benchmarks with distinctly long context, taking into account the characteristics that make it qualitatively different from shorter context.

Practical large language model (LLM) services may involve a long system prompt, which specifies the instructions, examples, and knowledge documents of the task and is reused across numerous requests. However, the long system prompt causes throughput/latency bottlenecks as the cost of generating the next token grows w.r.t. the sequence length. This paper aims to improve the efficiency of LLM services that involve long system prompts. Our key observation is that handling these system prompts requires heavily redundant memory accesses in existing causal attention computation algorithms. Specifically, for batched requests, the cached hidden states (i.e., key-value pairs) of system prompts are transferred from off-chip DRAM to on-chip SRAM multiple times, each corresponding to an individual request. To eliminate such a redundancy, we propose RelayAttention, an attention algorithm that allows reading these hidden states from DRAM exactly once for a batch of input tokens. RelayAttention is a free lunch: it maintains the generation quality while requiring no model retraining, as it is based on a mathematical reformulation of causal attention.

Recently, the increasing demand for superior medical services has highlighted the discrepancies in the medical infrastructure. With big data, especially texts, forming the foundation of medical services, there is an exigent need for effective natural language processing (NLP) solutions tailored to the healthcare domain. Conventional approaches leveraging pre-trained models present promising results in this domain and current large language models (LLMs) offer advanced foundation for medical text processing. However, most medical LLMs are trained only with supervised fine-tuning (SFT), even though it efficiently empowers LLMs to understand and respond to medical instructions but is ineffective in learning domain knowledge and aligning with human preference. Another engineering barrier that prevents current medical LLM from better text processing ability is their restricted context length (e.g., 2,048 tokens), making it hard for the LLMs to process long context, which is frequently required in the medical domain. In this work, we propose ChiMed-GPT, a new benchmark LLM designed explicitly for Chinese medical domain, with enlarged context length to 4,096 tokens and undergoes a comprehensive training regime with pre-training, SFT, and RLHF. Evaluations on real-world tasks including information extraction, question answering, and dialogue generation demonstrate ChiMed-GPT's superior performance over general domain LLMs. Furthermore, we analyze possible biases through prompting ChiMed-GPT to perform attitude scales regarding discrimination of patients, so as to contribute to further responsible development of LLMs in the medical domain. The code and model are released at https://github.com/synlp/ChiMed-GPT.

Diffusion language models (DLMs) provide a bidirectional generation framework naturally suited for infilling, yet their performance is constrained by the pre-specified infilling length. In this paper, we reveal that DLMs possess an inherent ability to discover the correct infilling length. We identify two key statistical phenomena in the first-step denoising confidence: a local Oracle Peak that emerges near the ground-truth length and a systematic Length Bias that often obscures this signal. By leveraging this signal and calibrating the bias, our training-free method CAL (Calibrated Adaptive Length) enables DLMs to approximate the optimal length through an efficient search before formal decoding. Empirical evaluations demonstrate that CAL improves Pass@1 by up to 47.7\% over fixed-length baselines and 40.5\% over chat-based adaptive methods in code infilling, while boosting BLEU-2 and ROUGE-L by up to 8.5\% and 9.9\% in text infilling. These results demonstrate that CAL paves the way for robust DLM infilling without requiring any specialized training. Code is available at https://github.com/NiuHechang/Calibrated_Adaptive_Length.

We extend the context length of Llama-3-8B-Instruct from 8K to 80K via QLoRA fine-tuning. The entire training cycle is super efficient, which takes 8 hours on one 8xA800 (80G) GPU machine. The resulted model exhibits superior performances across a broad range of evaluation tasks, such as NIHS, topic retrieval, and long-context language understanding; meanwhile, it also well preserves the original capability over short contexts. The dramatic context extension is mainly attributed to merely 3.5K synthetic training samples generated by GPT-4 , which indicates the LLMs' inherent (yet largely underestimated) potential to extend its original context length. In fact, the context length could be extended far beyond 80K with more computation resources. Therefore, the team will publicly release the entire resources (including data, model, data generation pipeline, training code) so as to facilitate the future research from the community: https://github.com/FlagOpen/FlagEmbedding.

Reinforcement Learning from Human Feedback relies on reward models to align large language models with human preferences. However, RLHF often suffers from reward hacking, wherein policy learning exploits flaws in the trained reward model to maximize reward scores without genuinely aligning with human preferences. A significant example of such reward hacking is length bias, where reward models usually favor longer responses irrespective of actual response quality. Previous works on length bias have notable limitations, these approaches either mitigate bias without characterizing the bias form, or simply assume a linear length-reward relation. To accurately model the intricate nature of length bias and facilitate more effective bias mitigation, we propose FiMi-RM (Bias Fitting to Mitigate Length Bias of Reward Model in RLHF), a framework that autonomously learns and corrects underlying bias patterns. Our approach consists of three stages: First, we train a standard reward model which inherently contains length bias. Next, we deploy a lightweight fitting model to explicitly capture the non-linear relation between length and reward. Finally, we incorporate this learned relation into the reward model to debias. Experimental results demonstrate that FiMi-RM achieves a more balanced length-reward distribution. Furthermore, when applied to alignment algorithms, our debiased reward model improves length-controlled win rate and reduces verbosity without compromising its performance.

The diversity in length constitutes a significant characteristic of text. Due to the long-tail distribution of text lengths, most existing methods for scene text recognition (STR) only work well on short or seen-length text, lacking the capability of recognizing longer text or performing length extrapolation. This is a crucial issue, since the lengths of the text to be recognized are usually not given in advance in real-world applications, but it has not been adequately investigated in previous works. Therefore, we propose in this paper a method called Length-Insensitive Scene TExt Recognizer (LISTER), which remedies the limitation regarding the robustness to various text lengths. Specifically, a Neighbor Decoder is proposed to obtain accurate character attention maps with the assistance of a novel neighbor matrix regardless of the text lengths. Besides, a Feature Enhancement Module is devised to model the long-range dependency with low computation cost, which is able to perform iterations with the neighbor decoder to enhance the feature map progressively. To the best of our knowledge, we are the first to achieve effective length-insensitive scene text recognition. Extensive experiments demonstrate that the proposed LISTER algorithm exhibits obvious superiority on long text recognition and the ability for length extrapolation, while comparing favourably with the previous state-of-the-art methods on standard benchmarks for STR (mainly short text).

We study continued training and supervised fine-tuning (SFT) of a language model (LM) to make effective use of long-context information. We first establish a reliable evaluation protocol to guide model development -- Instead of perplexity or simple needle-in-a-haystack (NIAH) tests, we use a broad set of long-context tasks, and we evaluate models after SFT with instruction data as this better reveals long-context abilities. Supported by our robust evaluations, we run thorough experiments to decide the data mix for continued pre-training, the instruction tuning dataset, and many other design choices. We find that (1) code repositories and books are excellent sources of long data, but it is crucial to combine them with high-quality short data; (2) training with a sequence length beyond the evaluation length boosts long-context performance; (3) for SFT, using only short instruction datasets yields strong performance on long-context tasks. Our final model, ProLong-8B, which is initialized from Llama-3 and trained on 40B tokens, demonstrates state-of-the-art long-context performance among similarly sized models at a length of 128K. ProLong outperforms Llama-3.18B-Instruct on the majority of long-context tasks despite having seen only 5% as many tokens during long-context training. Additionally, ProLong can effectively process up to 512K tokens, one of the longest context windows of publicly available LMs.