Daily Papers

We develop a predictor-feedback cooperative adaptive cruise control (CACC) design relying on a multiple-predecessor-following (MPF) topology-based nominal delay-free CACC law. We consider vehicular platoons with heterogeneous vehicles, whose dynamics are described by a third-order linear system subject to actuation delay, along with vehicle-to-vehicle (V2V) communication delay. The design achieves individual vehicle stability, string stability, and zero, steady-state speed/spacing tracking errors, for any value of the actuation delay. The proofs of individual vehicle stability, string stability, and regulation rely on employment of an input-output approach on the frequency domain, capitalizing on the delay-compensating property of the design, which enables as to derive explicit string stability conditions on control and vehicle models parameters. The theoretical guarantees of string stability and the respective conditions on parameters are illustrated also numerically. We present consistent simulation results, for a ten-vehicle platoon, illustrating the potential of the design in traffic throughput improvement, as compared with a predictor-feedback CACC design in which, each ego vehicle's controller utilizes information only from a single preceding vehicle. We also present simulation results in a realistic scenario in which the leading vehicle's trajectory is obtained from NGSIM data.

Model Predictive Controllers (MPC) require a good model for the controlled process. In this paper I infer inductive biases about a physical system. I use these biases to derive a new neural network architecture that can model this real system that has noise and inertia. The main inductive biases exploited here are: the delayed impact of some inputs on the system and the separability between the temporal component and how the inputs interact to produce the output of a system. The inputs are independently delayed using shifted convolutional kernels. Feature interactions are modelled using a fully connected network that does not have access to temporal information. The available data and the problem setup allow the usage of Self Supervised Learning in order to train the models. The baseline architecture is an Attention based Reccurent network adapted to work with MPC like inputs. The proposed networks are faster, better at exploiting larger data volumes and are almost as good as baseline networks in terms of prediction performance. The proposed architecture family called Delay can be used in a real scenario to control systems with delayed responses with respect to its controls or inputs. Ablation studies show that the presence of delay kernels are vital to obtain any learning in proposed architecture. Code and some experimental data are available online.

The standard formulation of Markov decision processes (MDPs) assumes that the agent's decisions are executed immediately. However, in numerous realistic applications such as robotics or healthcare, actions are performed with a delay whose value can even be stochastic. In this work, we introduce stochastic delayed execution MDPs, a new formalism addressing random delays without resorting to state augmentation. We show that given observed delay values, it is sufficient to perform a policy search in the class of Markov policies in order to reach optimal performance, thus extending the deterministic fixed delay case. Armed with this insight, we devise DEZ, a model-based algorithm that optimizes over the class of Markov policies. DEZ leverages Monte-Carlo tree search similar to its non-delayed variant EfficientZero to accurately infer future states from the action queue. Thus, it handles delayed execution while preserving the sample efficiency of EfficientZero. Through a series of experiments on the Atari suite, we demonstrate that although the previous baseline outperforms the naive method in scenarios with constant delay, it underperforms in the face of stochastic delays. In contrast, our approach significantly outperforms the baselines, for both constant and stochastic delays. The code is available at http://github.com/davidva1/Delayed-EZ .

Deliberating takes time. In real-time settings, that time is not free. Standard reinforcement learning (RL) sidesteps this as the environment waits indefinitely for the agent's decision. Instead, we study real-time RL environments where the environment progresses while waiting for the agent's action. Building on prior real-time formalizations, we introduce variable-delay real-time RL, where the agent chooses how long to deliberate at each decision point since the environment progresses. For the planning agents we use, the right delay is state-dependent, and naively planning how long to plan can paralyze the agent. We instead approach this setting by training a lightweight gating policy on top of a planner to select state-dependent planning budgets. Across real-time Pac-Man, Tetris, Snake, Speed Hex, and Speed Go, our gating policy outperforms fixed-budget and heuristic baselines, and transfers to a real-time setup where the environment and agent run on two different GPUs.

Significant work has been recently dedicated to the stochastic delayed bandit setting because of its relevance in applications. The applicability of existing algorithms is however restricted by the fact that strong assumptions are often made on the delay distributions, such as full observability, restrictive shape constraints, or uniformity over arms. In this work, we weaken them significantly and only assume that there is a bound on the tail of the delay. In particular, we cover the important case where the delay distributions vary across arms, and the case where the delays are heavy-tailed. Addressing these difficulties, we propose a simple but efficient UCB-based algorithm called the PatientBandits. We provide both problems-dependent and problems-independent bounds on the regret as well as performance lower bounds.

Real-time execution is essential for cyber-physical systems such as robots. These systems operate in dynamic real-world environments where even small delays can undermine responsiveness and compromise performance. Asynchronous inference has recently emerged as a system-level paradigm for real-time robot manipulation, enabling the next action chunk to be predicted while the current one is being executed. While this approach achieves real-time responsiveness, naive integration often results in execution failure. Previous methods attributed this failure to inter-chunk discontinuity and developed test-time algorithms to smooth chunk boundaries. In contrast, we identify another critical yet overlooked factor: intra-chunk inconsistency, where the robot's executed action chunk partially misaligns with its current perception. To address this, we propose REMAC, which learns corrective adjustments on the pretrained policy through masked action chunking, enabling the policy to remain resilient under mismatches between intended actions and actual execution during asynchronous inference. In addition, we introduce a prefix-preserved sampling procedure to reinforce inter-chunk continuity. Overall, our method delivers more reliable policies without incurring additional latency. Extensive experiments in both simulation and real-world settings demonstrate that our method enables faster task execution, maintains robustness across varying delays, and consistently achieves higher completion rates.

Different stages of manipulation tasks exhibit varying levels of difficulty, suggesting stage-dependent motion speeds and temporal prediction horizons. However, existing IL-based visuomotor policies typically imitate the execution speed of expert demonstrations and operate with a fixed temporal prediction horizon, limiting flexibility and overall task throughput. In this paper, we introduce AutoSpeed, a model-agnostic learning framework that enables existing visuomotor policies to predict trajectories with stage-adaptive motion speeds, without requiring speed or stage annotations. We treat future trajectories at different speeds as candidate optimization targets, evaluate each candidate using a composite cost that trades off prediction error against prediction horizon, and optimize the policy toward the minimum-cost candidate. With a fixed-length action sequence, speed modulation adjusts the effective temporal prediction horizon: simple stages are executed faster with a longer prediction horizon, whereas complex stages are executed more slowly with a shorter prediction horizon. Specifically, we implement speed modulation in the frequency domain via the discrete cosine transform (DCT), which enables smooth, non-integer speed scaling and thus preserves motion continuity. Extensive evaluations show that AutoSpeed substantially reduces task execution time while also improving success rates. Under the AutoSpeed framework, the inferred motion speeds exhibit a strong correspondence with task stages.

Generative Behavior Cloning (GBC) is a simple yet effective framework for robot learning, particularly in multi-task settings. Recent GBC methods often employ diffusion policies with open-loop (OL) control, where actions are generated via a diffusion process and executed in multi-step chunks without replanning. While this approach has demonstrated strong success rates and generalization, its inherent stochasticity can result in erroneous action sampling, occasionally leading to unexpected task failures. Moreover, OL control suffers from delayed responses, which can degrade performance in noisy or dynamic environments. To address these limitations, we propose two novel techniques to enhance the consistency and reactivity of diffusion policies: (1) self-guidance, which improves action fidelity by leveraging past observations and implicitly promoting future-aware behavior; and (2) adaptive chunking, which selectively updates action sequences when the benefits of reactivity outweigh the need for temporal consistency. Extensive experiments show that our approach substantially improves GBC performance across a wide range of simulated and real-world robotic manipulation tasks. Our code is available at https://github.com/junhyukso/SGAC

Multi-agent large language model (LLM) systems often rely on verifier and critic agents to suppress hallucinations, but verification is delayed. During this delay, false claims can propagate through the agent network. We model this process as delayed consensus on a graph with grounded corrector nodes. Spectral decomposition by the grounded Laplacian yields a closed-form stability threshold for the verification dose: correction that is too strong or too delayed can turn consensus into oscillation. The most unstable regime occurs when the communication and verification delays coincide; for delay two, the threshold is the inverse golden ratio. The same framework gives a supermodular placement objective and a greedy (1-1/e)-approximation rule for assigning a limited corrector budget to influential nodes. Experiments across five open models confirm the predicted dose-delay oscillations. By contrast, grounded factual answering makes truth an absorbing boundary and eliminates the effect, suggesting that the instability is specific to signed-belief tasks while grounded verification remains stabilizing

Flight delay prediction has become a key focus in air traffic management, as delays highlight inefficiencies that impact overall network performance. This paper presents a lightweight large language model-based multimodal flight delay prediction, formulated from the perspective of air traffic controllers monitoring aircraft delay after entering the terminal area. The approach integrates trajectory representations with textual aeronautical information, including flight information, weather reports, and aerodrome notices, by adapting trajectory data into the language modality to capture airspace conditions. The experiments show that the model consistently achieves sub-minute prediction error by effectively leveraging contextual information related to the sources of delay, fulfilling the operational standard for minute-level precision. The framework demonstrates that linguistic understanding, when combined with cross-modality adaptation of trajectory data, enhances delay prediction. Moreover, the approach shows practicality and potential scalability for real-world operations, supporting real-time updates that refine predictions upon receiving new operational information.

We develop a deep reinforcement learning method for training a jellyfish-like swimmer to effectively track a moving target in a two-dimensional flow. This swimmer is a flexible object equipped with a muscle model based on torsional springs. We employ a deep Q-network (DQN) that takes the swimmer's geometry and dynamic parameters as inputs, and outputs actions which are the forces applied to the swimmer. In particular, we introduce an action regulation to mitigate the interference from complex fluid-structure interactions. The goal of these actions is to navigate the swimmer to a target point in the shortest possible time. In the DQN training, the data on the swimmer's motions are obtained from simulations conducted using the immersed boundary method. During tracking a moving target, there is an inherent delay between the application of forces and the corresponding response of the swimmer's body due to hydrodynamic interactions between the shedding vortices and the swimmer's own locomotion. Our tests demonstrate that the swimmer, with the DQN agent and action regulation, is able to dynamically adjust its course based on its instantaneous state. This work extends the application scope of machine learning in controlling flexible objects within fluid environments.

Delayed outcomes are ubiquitous in online experimentation: treatment can affect whether an outcome occurs, when it occurs, and its realized value. To accommodate staggered entry while remaining robust to environmental nonstationarity and unit-level heterogeneity, we adopt a design-based perspective and target the sample cumulative reward in each arm as a function of calendar time. Our confidence sequences allow practitioners to continuously monitor the counterfactual incremental reward, such as revenue, that would have been realized by calendar time t had all entered units been assigned to treatment rather than control. The main technical challenge is the choice of design-based filtration, complicated by the presence of asynchronous potential outcome times. We show that the IPW treatment-effect estimation error is not a martingale with respect to any filtration, while each arm-specific IPW estimation error is a martingale with respect to a carefully chosen arm-specific event-time filtration. We therefore construct a confidence sequence for the treatment effect by combining two arm-level confidence sequences with a union bound, and further demonstrate that this can outperform the traditional design-based variance upper bound. Finally, we characterize the class of augmentations for which the per-arm AIPW estimation error remains a martingale.

Operating robots precisely and at high speeds has been a long-standing goal of robotics research. Balancing these competing demands is key to enabling the seamless collaboration of robots and humans and increasing task performance. However, traditional motor-driven systems often fall short in this balancing act. Due to their rigid and often heavy design exacerbated by positioning the motors into the joints, faster motions of such robots transfer high forces at impact. To enable precise and safe dynamic motions, we introduce a four degree-of-freedom~(DoF) tendon-driven robot arm. Tendons allow placing the actuation at the base to reduce the robot's inertia, which we show significantly reduces peak collision forces compared to conventional robots with motors placed near the joints. Pairing our robot with pneumatic muscles allows generating high forces and highly accelerated motions, while benefiting from impact resilience through passive compliance. Since tendons are subject to additional friction and hence prone to wear and tear, we validate the reliability of our robotic arm on various experiments, including long-term dynamic motions. We also demonstrate its ease of control by quantifying the nonlinearities of the system and the performance on a challenging dynamic table tennis task learned from scratch using reinforcement learning. We open-source the entire hardware design, which can be largely 3D printed, the control software, and a proprioceptive dataset of 25 days of diverse robot motions at webdav.tuebingen.mpg.de/pamy2.

Neural network training is commonly accelerated by using multiple synchronized workers to compute gradient updates in parallel. Asynchronous methods remove synchronization overheads and improve hardware utilization at the cost of introducing gradient delay, which impedes optimization and can lead to lower final model performance. We introduce Adaptive Braking (AB), a modification for momentum-based optimizers that mitigates the effects of gradient delay. AB dynamically scales the gradient based on the alignment of the gradient and the velocity. This can dampen oscillations along high curvature directions of the loss surface, stabilizing and accelerating asynchronous training. We show that applying AB on top of SGD with momentum enables training ResNets on CIFAR-10 and ImageNet-1k with delays D geq 32 update steps with minimal drop in final test accuracy.

Spiking Neural Networks (SNNs) are a promising research direction for building power-efficient information processing systems, especially for temporal tasks such as speech recognition. In SNNs, delays refer to the time needed for one spike to travel from one neuron to another. These delays matter because they influence the spike arrival times, and it is well-known that spiking neurons respond more strongly to coincident input spikes. More formally, it has been shown theoretically that plastic delays greatly increase the expressivity in SNNs. Yet, efficient algorithms to learn these delays have been lacking. Here, we propose a new discrete-time algorithm that addresses this issue in deep feedforward SNNs using backpropagation, in an offline manner. To simulate delays between consecutive layers, we use 1D convolutions across time. The kernels contain only a few non-zero weights - one per synapse - whose positions correspond to the delays. These positions are learned together with the weights using the recently proposed Dilated Convolution with Learnable Spacings (DCLS). We evaluated our method on three datasets: the Spiking Heidelberg Dataset (SHD), the Spiking Speech Commands (SSC) and its non-spiking version Google Speech Commands v0.02 (GSC) benchmarks, which require detecting temporal patterns. We used feedforward SNNs with two or three hidden fully connected layers, and vanilla leaky integrate-and-fire neurons. We showed that fixed random delays help and that learning them helps even more. Furthermore, our method outperformed the state-of-the-art in the three datasets without using recurrent connections and with substantially fewer parameters. Our work demonstrates the potential of delay learning in developing accurate and precise models for temporal data processing. Our code is based on PyTorch / SpikingJelly and available at: https://github.com/Thvnvtos/SNN-delays

Regulatory institutions (from content moderation platforms to financial supervisors) observe, deliberate, and intervene only after a characteristic delay. We ask whether this processing lag alone can destabilize a multi-agent system that would otherwise remain stable, without exogenous shocks, coordination among agents, or malicious actors. We study this question in two stages. First, we analyze a delayed replicator equation in which autonomous agents receive a benefit from radical behavior but face punishment based on a lagged institutional alarm signal. We derive a closed-form critical delay threshold beyond which the unique interior equilibrium loses stability through a Hopf bifurcation, and prove via center manifold reduction that the bifurcation is supercritical (producing bounded oscillations, not explosive growth) for the entire sigmoid response-function family. Second, we embed N=240 agents on a network and equip them with reinforcement learning (tabular Q-learning), comparing three decision architectures in a factorial design: non-reactive agents (fixed policy), reactive agents (threshold heuristic without memory), and Q-learning agents (adaptive with cumulative value estimates). The results reveal a hierarchy opposite to the naive expectation that learning amplifies instability: non-reactive agents are immune to delay (0% runaway across all tested values), reactive agents collapse catastrophically (96% runaway by delay geq 8 steps), and Q-learning agents achieve partial resilience (66% runaway at delay = 20). The destabilizing ingredient is reactivity to delayed signals: agents that immediately exploit low-alarm windows trigger oscillatory feedback loops. Learning buffers this through implicit punishment memory encoded in Q-values