Daily Papers

The correlation between black hole mass, M_{rm bh}, and stellar velocity dispersion, σ_0, is revisited using 137 galaxies with quantitative bar strengths and enhanced morphological awareness. Interpreted within the `Triangal' evolutionary framework, gas-rich and gas-poor assembly pathways emerge in the M_{rm bh}-σ_0 diagram. To quantify these scaling relations, a symmetric Bayesian hierarchical regression code, dubbed the Symmetric COvariance Population Estimator (SCOPE), is introduced. Unlike conditional estimators (e.g., LINMIX), SCOPE derives the intrinsic population covariance, natively accommodating asymmetric measurement errors while guaranteeing directional invariance between axes. Primeval, dust-poor S0 galaxies (including dwarf early-type galaxies with R_{rm e,gal} ~ 1 kpc) follow a shallow relation (M_{rm bh}proptoσ_0^{2.5--3.1}). Explained via the virial theorem, this flattening reframes expectations for intermediate-mass black holes. In contrast, tracing the `Disc Down-sizing' sequence - where dry mergers erase discs - yields a steep relation for massive elliptical and ellicular galaxies (M_{rm bh}proptoσ_0^{7.8pm1.4}). Applying a single, monolithic scaling relation across all morphologies inadvertently averages over different formation histories, potentially skewing AGN virial f-factor calibrations and systematically under-predicting the ultra-massive black holes needed to generate the nanohertz gravitational wave background. Furthermore, strongly barred, dust-poor S0 galaxies appear offset to higher σ_0, while this dynamical signature is lost in the complexities of spiral galaxies. Ultimately, these morphology-dependent relations provide physically-motivated benchmarks for cosmological simulations and a framework for disentangling regimes driven by AGN feedback from those driven by mergers.

We study a variant of quantum hypothesis testing wherein an additional 'inconclusive' measurement outcome is added, allowing one to abstain from attempting to discriminate the hypotheses. The error probabilities are then conditioned on a successful attempt, with inconclusive trials disregarded. We completely characterise this task in both the single-shot and asymptotic regimes, providing exact formulas for the optimal error probabilities. In particular, we prove that the asymptotic error exponent of discriminating any two quantum states ρ and σ is given by the Hilbert projective metric D_{max}(ρ|σ) + D_{max}(σ| ρ) in asymmetric hypothesis testing, and by the Thompson metric max { D_{max}(ρ|σ), D_{max}(σ| ρ) } in symmetric hypothesis testing. This endows these two quantities with fundamental operational interpretations in quantum state discrimination. Our findings extend to composite hypothesis testing, where we show that the asymmetric error exponent with respect to any convex set of density matrices is given by a regularisation of the Hilbert projective metric. We apply our results also to quantum channels, showing that no advantage is gained by employing adaptive or even more general discrimination schemes over parallel ones, in both the asymmetric and symmetric settings. Our state discrimination results make use of no properties specific to quantum mechanics and are also valid in general probabilistic theories.

Many political science theories relate to latent variables, but such quantities cannot be observed directly and must instead be estimated from data with inherent uncertainty. In regression models, when a variable is measured with error, its slope coefficient is known to be biased toward zero. We show how measurement error interacts with unique aspects of latent variable estimation, identification restrictions in particular, and demonstrate how common error adjustment strategies can worsen bias. We introduce a method for adjusting coefficients on latent predictors, which reduces bias and typically increases the magnitude of estimated coefficients, often dramatically. We illustrate these dynamics using several different estimation strategies for the latent predictors. Corrected estimates using our proposed method show stronger relationships -- sometimes up to 50% larger -- than those from naive regression. Our findings highlight the importance of considering measurement error in latent predictors and the inadequacy of many commonly used approaches for dealing with this issue.

Equivariance theory predicts that an architectural symmetry prior reduces sample complexity by a factor of |G|; this is widely cited but rarely measured as a scaling law with controls that separate the prior from its confounds. On a controlled C_n-symmetric task, we report three findings. First, a wrong-group control with identical orbit size and matched compute is worse than no constraint (joint pairwise CI [+0.79, +3.26] excludes zero, robust across estimators); misaligned constraint is actively harmful, not merely unhelpful. Second, an augmentation baseline equipped with test-time orbit averaging matches the equivariant model exactly -- bit-identical per-epoch validation curves across matched cells -- so the architecture-vs-augmentation gap is conditional on asymmetric test-time computation, not unconditional. Third, the relative exchange rate beta_diff = 1.28 is consistent in sign and order of magnitude with the theoretical 1.0 (single-level CI [+0.92, +2.05]); the more conservative two-level bootstrap (seeds x group sizes) widens this to [-0.63, +1.72], including zero, and a finer-N replication on a sqrt(2)-spaced grid is inconclusive (point estimate -0.82). The methodological contributions -- the relative-rate estimator that cancels the shared-difficulty confound, the wrong-group control, and a pre-specified failure taxonomy -- transfer to any inductive bias whose strength can be parameterised. Honest scoping: the primary estimator beta_diff was adopted post-hoc after the initial analysis revealed a positive-slope identifiability problem; the design was never externally pre-registered; and the headline number rests on an OLS slope over seven group sizes on a coarse N grid. This is an exploratory study, not a confirmatory measurement; the wrong-group result is the cleanest finding and the one we report with the most confidence. A registered replication on fresh seeds is future work.

Complete orthogonal predictive coordinates do not by themselves bind a latent direction to a named intervention. We present a mathematical and synthetic audit motivated by vascular device-vessel suitcordance. Capacity-matched least-squares predictors were exactly equivalent under complete fixed output transforms, whereas an anchor-only observer recovered interpretations only within the span of known perturbation signatures. Six three-dimensional configurations across 64 seeds gave a maximum paired prediction discrepancy of 6.7e-15 but a median untransported edit error of 1.513. Coordinate transport removed that error. Noisy and weak anchors constrained calibration stability, and changing the representation basis required recalibration or verified transport. Across 256 additional fits in dimensions 3-24, prediction equivalence persisted within 4.0e-15. We then evaluated nine deliberate runnable fault classes across 64 seeds. All 576 faulty executions completed, but each violated at least one reconstruction, prediction, delivered-edit or scope contract; all 320 valid control records passed. Repeating a faulty implementation gave exact self-agreement despite error against the separately computed simulator expectation. For one omitted-direction defect, probe coverage followed its analytic law, and rank-aware abstention protected unsupported interpretations. Scalar-noise experiments exposed both missed weak faults and excessive rejection under narrow relative tolerances. These controls provide an executable separation of prediction, semantic support and scientific acceptance. They are synthetic numerical audits, not clinical validation, neural JEPA-Anything replication, agent learning or patient treatment-effect estimation.

Operator-learning benchmarks ship as full-precision arrays, and they have grown to terabyte scale. A curator who wants to distribute one has to decide how coarsely to store it. That decision is usually made by fixing a tolerance on the reconstruction error of the stored field. We show that this quantity is measured in the wrong place. It compares the stored field with the original, before any model is trained. What the curator is buying is the accuracy of a model trained on the compressed copy, and the two can disagree: two PDEBench families stored to identical field error differ threefold downstream. A solution operator smooths, so only part of the codec error ever reaches the model's output. That part can be measured. Push a compressed field through a model already trained at full precision, and compare its output against the output on the clean field. The measurement costs forward passes and no training on compressed data. It spans more than two orders of magnitude across six PDE families, and it orders downstream cost where field error does not, inverting 12 of 104 cross-dataset comparisons against field error's 36. Read as a budget, the same curve nominates a storage rate for each dataset. A back-check against trained models finds those rates wrong in both directions by up to a factor of two in stored bits.

Noise plagues many numerical datasets, where the recorded values in the data may fail to match the true underlying values due to reasons including: erroneous sensors, data entry/processing mistakes, or imperfect human estimates. We consider general regression settings with covariates and a potentially corrupted response whose observed values may contain errors. By accounting for various uncertainties, we introduced veracity scores that distinguish between genuine errors and natural data fluctuations, conditioned on the available covariate information in the dataset. We propose a simple yet efficient filtering procedure for eliminating potential errors, and establish theoretical guarantees for our method. We also contribute a new error detection benchmark involving 5 regression datasets with real-world numerical errors (for which the true values are also known). In this benchmark and additional simulation studies, our method identifies incorrect values with better precision/recall than other approaches.

We propose a modified moment matching algorithm to avoid catastrophic failures for sources with a low signal to noise ratio (SNR). The proposed modifications include a method to eliminate non-physical negative pixel values and a forced single iteration with an initial guess derived from co-add measurements when iterative methods are unstable. We correct for all biases in measurements introduced by the method. We find that the proposed modifications allow the algorithm to avoid catastrophic failures in nearly 100\% of the cases, especially at low signal to noise ratio. Additionally, with a reasonable guess from co-add measurements, the algorithm measures the flux, centroid, size, shape and ellipticity with bias statistically consistent with zero. We show the proposed method allows us to measure sources seven times fainter than traditional methods when applied to images obtained from WIYN-ODI. We also present a scheme to find uncertainties in measurements when using the new method to measure astronomical sources.

Recent prominent post-training methods, such as Reinforcement Learning (RL) and On-Policy Self-Distillation (OPSD), have driven rapid progress in mathematical reasoning for large language models, yet their reliance on ground-truth labels precludes test-time training (TTT). Replacing ground truth with majority-vote pseudo-labels is a natural alternative, yet it is fragile: an incorrect vote corrupts the teacher and misleads every token. We observe that this failure mode is asymmetric: rollouts that disagree with the pseudo-label are typically wrong regardless of whether the vote itself is correct. Building on this observation, we propose Test-Time Policy Optimization (TTPO), an asymmetric objective that distills agreeing rollouts via OPSD and penalizes disagreeing rollouts with Grouped RL. Token-level selection further refines both branches: distillation down-weights already-converged positions, while RL penalizes only confident errors. Both updates remain well-grounded even under frequent pseudo-label errors, and majority-vote routing yields tighter self-supervision as the model improves. Without any labels, TTPO matches label-supervised OPSD on five competition-level benchmarks, raises Qwen3-1.7B from 38.0% to 45.2% in TTT, yields +25.2% to +36.4% without thinking, and shows strong cross-task generalization.

Benchmark contamination is diagnosed with n-gram overlap, likelihood-based membership inference, or canary strings, and each needs something usually unavailable: the training corpus, a well-chosen test statistic, or foresight at release. A recent alternative reads it off a linear probe on internal activations. We show the natural way to do this does not work, specify one that survives measurement, then find that the correction making it work carries more variance than the null it is tested against. The protocol reports a zero-sum contrast on the depth profile of probe accuracy, recentred on a level-matched placebo baseline, tested against a label-permutation null, with the reference set twice the size of the suspect set. Each choice replaces a simpler alternative we rejected on measurement. Reporting the level of excess separability rather than its shape makes the false positive rate track the size of the analyst's own control set, 0.03 to 0.99 under a true null. Contrasting against a flat depth profile rejects a true null 0.72 of the time when surface decodability rises with depth, and loses all power when it falls. On real transformers the protocol fails a test the simulations did not pose. The recentring subtracts an estimate, and the permutation null holds it fixed. Re-estimated across split seeds on four audits of contaminated checkpoints, its standard deviation is 1.30 to 1.56 times the null's own in every arm: what is subtracted to remove a bias is more variable than what it corrects. The one nominally significant result, p = 0.0075, becomes 0.0745 once that variance is propagated, and no verdict is issued. The simulations missed this because their surface key is the covariate driving item variation; on real text it is a proxy, and degrading key quality in simulation reproduces it. We add a companion measurement and a widened null. No arm shows contamination.

Overconfidence and underconfidence in machine learning classifiers is measured by calibration: the degree to which the probabilities predicted for each class match the accuracy of the classifier on that prediction. How one measures calibration remains a challenge: expected calibration error, the most popular metric, has numerous flaws which we outline, and there is no clear empirical understanding of how its choices affect conclusions in practice, and what recommendations there are to counteract its flaws. In this paper, we perform a comprehensive empirical study of choices in calibration measures including measuring all probabilities rather than just the maximum prediction, thresholding probability values, class conditionality, number of bins, bins that are adaptive to the datapoint density, and the norm used to compare accuracies to confidences. To analyze the sensitivity of calibration measures, we study the impact of optimizing directly for each variant with recalibration techniques. Across MNIST, Fashion MNIST, CIFAR-10/100, and ImageNet, we find that conclusions on the rank ordering of recalibration methods is drastically impacted by the choice of calibration measure. We find that conditioning on the class leads to more effective calibration evaluations, and that using the L2 norm rather than the L1 norm improves both optimization for calibration metrics and the rank correlation measuring metric consistency. Adaptive binning schemes lead to more stablity of metric rank ordering when the number of bins vary, and is also recommended. We open source a library for the use of our calibration measures.

This paper addresses a regression problem in which output label values are the results of sensing the magnitude of a phenomenon. A low value of such labels can mean either that the actual magnitude of the phenomenon was low or that the sensor made an incomplete observation. This leads to a bias toward lower values in labels and the resultant learning because labels may have lower values due to incomplete observations, even if the actual magnitude of the phenomenon was high. Moreover, because an incomplete observation does not provide any tags indicating incompleteness, we cannot eliminate or impute them. To address this issue, we propose a learning algorithm that explicitly models incomplete observations corrupted with an asymmetric noise that always has a negative value. We show that our algorithm is unbiased as if it were learned from uncorrupted data that does not involve incomplete observations. We demonstrate the advantages of our algorithm through numerical experiments.

AI systems can fail silently. The failure propagates through training loops, evaluation pipelines, and production monitoring stacks until downstream harm makes it visible. This paper introduces evaluation blindness: a measurement function M exhibits evaluation blindness with respect to failure class F when it produces readings indistinguishable from a healthy state while the system is actually failing, with no auxiliary signal flagging the gap. The problem surfaces at two lifecycle stages the literature has treated separately. At training time, reward models are gamed, importance-sampling corrections are silently miscalculated, and benchmark contamination inflates fine-tuning evaluations, all while loss curves look healthy and gradient updates proceed normally. At deployment time, monitoring fails to catch six classes of production failure, including an Operational category that is 100% silent by structural definition. We provide a formal detectability predicate unifying both stages. Four training-time case studies trace concrete breakdowns, including a real implementation bug in TRL PR #6594 where gradients are corrupted as loss decreases normally. A six-class taxonomy validated against 50 real-world incidents from court documents and regulatory filings finds that 53% of verifiable public failures were silent. A failure budget framework ties acceptable failure rates to use-case risk class. The implication is direct: measurement infrastructure is a correctness concern across the full AI lifecycle, not just at evaluation time. Data, code, and taxonomy schema are at https://github.com/priyanka25aug/llm-failure-taxonomy.

Whether a language model has improved itself is increasingly judged not by mean accuracy but by which individual problems it gains and loses. Tracking these transitions means differencing two noisy estimates, leaving them vulnerable to measurement artifacts. Auditing three rounds of rank-32 LoRA self-training on Qwen3-8B against a frozen control pushed through the identical pipeline, we identify seven measurement failures, each of which inverts a reported finding when its control is absent. Several are standard practice. A ledger built on a single greedy decode manufactures capability changes on an untrained model, largely an artifact of inference batching; the expansion statistic separating acquisition from sharpening assigns that same model a rate of 0.280. The natural threshold repair does not survive replication: estimated across the frozen comparisons such a design already contains, its null stays non-zero. We replace it with a per-problem exact test against a pooled baseline under false-discovery-rate control, which detects nothing on any held-out replicate and is unchanged under the multiple-testing rule, error rate and pool size. Applied to a ladder of arms matched in stream, volume and evaluation, the audit finds that external distillation improves problems the base model rarely reaches while three forms of self-training do not; a regression rejects this asymmetry as a by-product of distillation's larger overall gain (p < 10^{-8}). On the far smaller set of problems the base model never reaches, the evidence is inconclusive, while self-training corrupts problems solved at baseline at rates well above the measured floor. Transition-level auditing therefore requires a separately measured null for every statistic it reports: nulls that cost no new experiments, built from baseline replicates a multi-arm study already owns, though not from as few as most possess.

Benchmarks measure whether a model is correct. They do not measure whether a model is reliable. This distinction is largely academic for single-shot inference, but becomes critical for agentic AI systems, where a single rephrased prompt can trigger cascading failures in multi-step execution. Yet this form of instability is not captured by existing evaluations. Hallucinations live in variance: they arise when semantically equivalent prompts activate inconsistent internal pathways, producing divergent outputs. Consistent but incorrect outputs reflect bias or missing knowledge; confident guessing reflects calibration failure. Neither constitutes hallucination under this definition. When error is variance-dominated, reducing redundant pathways improves reliability without adding knowledge. We formalize this through Semantic Stability (SS), measured via Paraphrase Consistency (PC@k): generate k paraphrases, greedy decode each, compute mode agreement. SS is a diagnostic for variance-driven unreliability, not a method for improving correctness. We show that a dense Qwen3-0.6B agrees with itself only 23.8% of the time; at 32% sparsity, agreement jumps to 55.9%. A phase diagram reveals the sweet spot where variance reduction outpaces bias accumulation, and regimes where stability collapses onto wrong answers.

Models of many engineering and natural systems are imperfect. The discrepancy between the mathematical representations of a true physical system and its imperfect model is called the model error. These model errors can lead to substantial differences between the numerical solutions of the model and the state of the system, particularly in those involving nonlinear, multi-scale phenomena. Thus, there is increasing interest in reducing model errors, particularly by leveraging the rapidly growing observational data to understand their physics and sources. Here, we introduce a framework named MEDIDA: Model Error Discovery with Interpretability and Data Assimilation. MEDIDA only requires a working numerical solver of the model and a small number of noise-free or noisy sporadic observations of the system. In MEDIDA, first the model error is estimated from differences between the observed states and model-predicted states (the latter are obtained from a number of one-time-step numerical integrations from the previous observed states). If observations are noisy, a data assimilation (DA) technique such as ensemble Kalman filter (EnKF) is employed to provide the analysis state of the system, which is then used to estimate the model error. Finally, an equation-discovery technique, here the relevance vector machine (RVM), a sparsity-promoting Bayesian method, is used to identify an interpretable, parsimonious, and closed-form representation of the model error. Using the chaotic Kuramoto-Sivashinsky (KS) system as the test case, we demonstrate the excellent performance of MEDIDA in discovering different types of structural/parametric model errors, representing different types of missing physics, using noise-free and noisy observations.

Sampling based consistency is widely used for hallucination detection, yet aggregate performance can conceal systematic differences in which errors are detectable. This work studies that heterogeneity across four language models and three factual question answering datasets. Partitioning hallucinations by answer agreement reveals high agreement (Ghost) and low agreement (Flickering) regimes with an apparent detectability gap of 0.35 to 0.46 AUC. Because the statistics used to define the regimes and measure this gap are strongly coupled (|ρ|approx0.94 to 1.00), the raw result is treated as a property of agreement based detection rather than independent evidence. After freezing regime assignments, lexical and semantic response dispersion preserve the asymmetry, with bootstrap 95% intervals excluding zero in all 12 model and dataset settings. A stricter test using individual diffusion trajectories and no cross seed information preserves the asymmetry across all three LLaDA datasets (p<0.005) and directionally across all three Dream datasets, with one reaching significance. The hard regime varies substantially in prevalence across models (16% to 77%), and matched prompts frequently change regimes between models. These findings show that aggregate detection metrics conceal persistent, model dependent heterogeneity in language model failures and motivate regime conditioned evaluation.

Equilibrium propagation (EP) is a compelling alternative to the backpropagation of error algorithm (BP) for computing gradients of neural networks on biological or analog neuromorphic substrates. Still, the algorithm requires weight symmetry and infinitesimal equilibrium perturbations, i.e., nudges, to estimate unbiased gradients efficiently. Both requirements are challenging to implement in physical systems. Yet, whether and how weight asymmetry affects its applicability is unknown because, in practice, it may be masked by biases introduced through the finite nudge. To address this question, we study generalized EP, which can be formulated without weight symmetry, and analytically isolate the two sources of bias. For complex-differentiable non-symmetric networks, we show that the finite nudge does not pose a problem, as exact derivatives can still be estimated via a Cauchy integral. In contrast, weight asymmetry introduces bias resulting in low task performance due to poor alignment of EP's neuronal error vectors compared to BP. To mitigate this issue, we present a new homeostatic objective that directly penalizes functional asymmetries of the Jacobian at the network's fixed point. This homeostatic objective dramatically improves the network's ability to solve complex tasks such as ImageNet 32x32. Our results lay the theoretical groundwork for studying and mitigating the adverse effects of imperfections of physical networks on learning algorithms that rely on the substrate's relaxation dynamics.

Image copy detection (ICD) aims to determine whether a query image is an edited copy of any image from a reference set. Currently, there are very limited public benchmarks for ICD, while all overlook a critical challenge in real-world applications, i.e., the distraction from hard negative queries. Specifically, some queries are not edited copies but are inherently similar to some reference images. These hard negative queries are easily false recognized as edited copies, significantly compromising the ICD accuracy. This observation motivates us to build the first ICD benchmark featuring this characteristic. Based on existing ICD datasets, this paper constructs a new dataset by additionally adding 100, 000 and 24, 252 hard negative pairs into the training and test set, respectively. Moreover, this paper further reveals a unique difficulty for solving the hard negative problem in ICD, i.e., there is a fundamental conflict between current metric learning and ICD. This conflict is: the metric learning adopts symmetric distance while the edited copy is an asymmetric (unidirectional) process, e.g., a partial crop is close to its holistic reference image and is an edited copy, while the latter cannot be the edited copy of the former (in spite the distance is equally small). This insight results in an Asymmetrical-Similarity Learning (ASL) method, which allows the similarity in two directions (the query <-> the reference image) to be different from each other. Experimental results show that ASL outperforms state-of-the-art methods by a clear margin, confirming that solving the symmetric-asymmetric conflict is critical for ICD. The NDEC dataset and code are available at https://github.com/WangWenhao0716/ASL.

Majority voting over multiple LLM attempts improves mathematical reasoning, but correlated errors limit the effective sample size. A natural fix is to assign different reasoning strategies to different voters. The approach, Diverse Prompt Mixer, is tested on the AIMO 3 competition: 3 models, 23+ experiments, 50 IMO-level problems, one H100 80 GB, 5-hour limit. Every prompt-level intervention fails. High-temperature sampling already decorrelates errors; weaker strategies reduce accuracy more than they reduce correlation. Across an 8-point capability gap at equal N=8 and every optimization tested, model capability dominates. The gap between the best majority-vote score (42/50) and pass@20 (~45.5) is selection loss, not prompt loss. A verifier-based selector could close it. Prompt engineering cannot.

Automated checking pipelines increasingly place one language model as the checker and another (or the same one) as the fixer. We ask whether that wiring changes what the checker reports. Measuring false alarms on human-verified-correct ProcessBench traces with the present task held byte-identical, we find that a completed audit -> repair episode already in the model's context lowers false alarms in 15 of 15 model x wording combinations, by 2.8 to 11.5 percentage points against a length-matched non-audit control, a 9 to 25% reduction relative to that control. The direction contradicts what the accumulated-message literature predicts: an episode whose audit reported an error lowers false alarms further still, at all five wordings on the model where that manipulation lands cleanly, though a negativity asymmetry predicts more flagging. Decomposing the episode finds repair content and audit verdict complementary: different components carry the effect on different model families. Signal-detection analysis locates the change in the threshold rather than in discrimination -- the criterion moves in 15 of 15 combinations and survives correction in 13 while d' survives in none, though the d' test is half as sensitive by construction -- and a hand audit of 50 false alarms finds 82% simply wrong, so at this operating point the shift need not be harmful. With reasoning enabled the effect keeps its relative size on both models tested, and the threshold reading holds there too.

Priorities in multi-criteria decision-making (MCDM) convey the relevance preference of one criterion over another, which is usually reflected by imposing the non-negativity and unit-sum constraints. The processing of such priorities is different than other unconstrained data, but this point is often neglected by researchers, which results in fallacious statistical analysis. This article studies three prevalent fallacies in group MCDM along with solutions based on compositional data analysis to avoid misusing statistical operations. First, we use a compositional approach to aggregate the priorities of a group of DMs and show that the outcome of the compositional analysis is identical to the normalized geometric mean, meaning that the arithmetic mean should be avoided. Furthermore, a new aggregation method is developed, which is a robust surrogate for the geometric mean. We also discuss the errors in computing measures of dispersion, including standard deviation and distance functions. Discussing the fallacies in computing the standard deviation, we provide a probabilistic criteria ranking by developing proper Bayesian tests, where we calculate the extent to which a criterion is more important than another. Finally, we explain the errors in computing the distance between priorities, and a clustering algorithm is specially tailored based on proper distance metrics.

Large language models (LLMs) are increasingly used to detect unsafe content. A common approach is to combine judgments from a panel of models to correct individual mistakes, but this benefit may disappear when every model sees the same misleading context before voting. We study this risk in a controlled two-round experiment. Each model first judges an item alone, then judges it again after six simulated peers either assert the wrong label or abstain. We combine the final judgments by majority vote. Across six open-weight LLMs and six datasets, we find that the wrong-label peer message raises the average reviewer false-alarm rate from 56.5% under silent peers to 87.5%, and majority voting raises the panel false-alarm rate to 100%. Without an asserted label, the same panel outperforms its average member. The effect is strongly asymmetric: reviewers follow pushes toward "unsafe" far more than pushes toward "safe" (about 75% versus 17%), so the panel's false-alarm rate rises sharply while its harmful-miss rate changes little. The proprietary-model probe shows substantial variation across models. These results identify susceptibility to shared social cues as a failure mode of safety panels and provide a simple pre-deployment diagnostic.

This paper proposes a new metric to measure the calibration error of probabilistic binary classifiers, called test-based calibration error (TCE). TCE incorporates a novel loss function based on a statistical test to examine the extent to which model predictions differ from probabilities estimated from data. It offers (i) a clear interpretation, (ii) a consistent scale that is unaffected by class imbalance, and (iii) an enhanced visual representation with repect to the standard reliability diagram. In addition, we introduce an optimality criterion for the binning procedure of calibration error metrics based on a minimal estimation error of the empirical probabilities. We provide a novel computational algorithm for optimal bins under bin-size constraints. We demonstrate properties of TCE through a range of experiments, including multiple real-world imbalanced datasets and ImageNet 1000.

Applications such as weather forecasting and personalized medicine demand models that output calibrated probability estimates---those representative of the true likelihood of a prediction. Most models are not calibrated out of the box but are recalibrated by post-processing model outputs. We find in this work that popular recalibration methods like Platt scaling and temperature scaling are (i) less calibrated than reported, and (ii) current techniques cannot estimate how miscalibrated they are. An alternative method, histogram binning, has measurable calibration error but is sample inefficient---it requires O(B/ε^2) samples, compared to O(1/ε^2) for scaling methods, where B is the number of distinct probabilities the model can output. To get the best of both worlds, we introduce the scaling-binning calibrator, which first fits a parametric function to reduce variance and then bins the function values to actually ensure calibration. This requires only O(1/ε^2 + B) samples. Next, we show that we can estimate a model's calibration error more accurately using an estimator from the meteorological community---or equivalently measure its calibration error with fewer samples (O(B) instead of O(B)). We validate our approach with multiclass calibration experiments on CIFAR-10 and ImageNet, where we obtain a 35% lower calibration error than histogram binning and, unlike scaling methods, guarantees on true calibration. In these experiments, we also estimate the calibration error and ECE more accurately than the commonly used plugin estimators. We implement all these methods in a Python library: https://pypi.org/project/uncertainty-calibration

We introduce a novel method for measuring properties of periodic phenomena with an event camera, a device asynchronously reporting brightness changes at independently operating pixels. The approach assumes that for fast periodic phenomena, in any spatial window where it occurs, a very similar set of events is generated at the time difference corresponding to the frequency of the motion. To estimate the frequency, we compute correlations of spatio-temporal windows in the event space. The period is calculated from the time differences between the peaks of the correlation responses. The method is contactless, eliminating the need for markers, and does not need distinguishable landmarks. We evaluate the proposed method on three instances of periodic phenomena: (i) light flashes, (ii) vibration, and (iii) rotational speed. In all experiments, our method achieves a relative error lower than 0.04%, which is within the error margin of ground truth measurements.

We investigate how looped transformers encode human preference, training lightweight evaluator heads on frozen Ouro-2.6B loop-iteration states on Anthropic HH-RLHF. v2: an erratum is prepended; the original manuscript is unchanged. A post-publication audit found the three headline results inflated by two independent evaluation errors. The 95.2% pairwise evaluator accuracy is a canonical-ordering artifact: the data were correctly split, but the evaluator learned to prefer the first-presented argument; its strict antisymmetrized accuracy on the full 8,552-pair test set is 63.9%. The 84.5% pairwise probe and the below-chance 21.75% pointwise probe were source-item leaks (orientation rows and pair partners crossing the train/test split); corrected pair-disjoint values are 56.5% and 54.2% -- above chance, so the "inverted polarity" finding is withdrawn. The central finding survives at much smaller magnitude: preference is decoded more accurately relationally than pointwise (paired +2.3 points, 95% CI [+1.3, +3.3]), and the antisymmetrized evaluator still beats the linear probe, but no corrected readout rivals end-to-end reward models. The methodological findings stand (constant-output degeneracy, flip test, swap-protocol metric deflation), with one correction: antisymmetrized accuracy, not antisymmetry correlation, certifies relational discrimination. The two errors are mutually invisible -- a split audit cannot see an ordering prior, antisymmetrization cannot see a leak -- so both checks are required. Full audit in the follow-up work (Kirin, 2026, in preparation).

Benchmarks are pivotal in driving AI progress, and invalid benchmark questions frequently undermine their reliability. Manually identifying and correcting errors among thousands of benchmark questions is not only infeasible but also a critical bottleneck for reliable evaluation. In this work, we introduce a framework for systematic benchmark revision that leverages statistical analysis of response patterns to flag potentially invalid questions for further expert review. Our approach builds on a core assumption commonly used in AI evaluations that the mean score sufficiently summarizes model performance. This implies a unidimensional latent construct underlying the measurement experiment, yielding expected ranges for various statistics for each item. When empirically estimated values for these statistics fall outside the expected range for an item, the item is more likely to be problematic. Across nine widely used benchmarks, our method guides expert review to identify problematic questions with up to 84\% precision. In addition, we introduce an LLM-judge first pass to review questions, further reducing human effort. Together, these components provide an efficient and scalable framework for systematic benchmark revision.

In natural language processing, a recently popular line of work explores how to best report the experimental results of neural networks. One exemplar publication, titled "Show Your Work: Improved Reporting of Experimental Results," advocates for reporting the expected validation effectiveness of the best-tuned model, with respect to the computational budget. In the present work, we critically examine this paper. As far as statistical generalizability is concerned, we find unspoken pitfalls and caveats with this approach. We analytically show that their estimator is biased and uses error-prone assumptions. We find that the estimator favors negative errors and yields poor bootstrapped confidence intervals. We derive an unbiased alternative and bolster our claims with empirical evidence from statistical simulation. Our codebase is at http://github.com/castorini/meanmax.

Video generators are increasingly evaluated as potential world models, which requires them to encode and understand physical laws. We investigate their representation of a fundamental law: gravity. Out-of-the-box video generators consistently generate objects falling at an effectively slower acceleration. However, these physical tests are often confounded by ambiguous metric scale. We first investigate if observed physical errors are artifacts of these ambiguities (e.g., incorrect frame rate assumptions). We find that even temporal rescaling cannot correct the high-variance gravity artifacts. To rigorously isolate the underlying physical representation from these confounds, we introduce a unit-free, two-object protocol that tests the timing ratio t_1^2/t_2^2 = h_1/h_2, a relationship independent of g, focal length, and scale. This relative test reveals violations of Galileo's equivalence principle. We then demonstrate that this physical gap can be partially mitigated with targeted specialization. A lightweight low-rank adaptor fine-tuned on only 100 single-ball clips raises g_{eff} from 1.81,m/s^2 to 6.43,m/s^2 (reaching 65% of terrestrial gravity). This specialist adaptor also generalizes zero-shot to two-ball drops and inclined planes, offering initial evidence that specific physical laws can be corrected with minimal data.

Calibration of language models -- the alignment between expressed or implicit confidence and empirical correctness -- is a well-studied subfield within NLP. Methods to measure it already exist. The problem is adoption: outside this subfield, NLP research regularly introduces new models, datasets, and benchmarks without checking whether the model's confidence scores are meaningful. We argue that this adoption gap is a major obstacle to trustworthy LLM evaluation. Miscalibration causes problems in two distinct areas: at deployment, where overconfident mistakes cause real harm, and inside the research pipeline, where methods like LLM-as-a-judge, synthetic data generation, and active learning rely on calibrated confidence without verifying it. Standard calibration metrics only require two inputs per example: a confidence score and a correctness judgment. Most benchmarks in use today already provide both, meaning calibration can be reported immediately. For open-ended generation, however, defining these two inputs is still an open challenge. We argue that each NLP subfield should pair its main performance metric with a calibration score and call for treating calibration as an essential property of every model rather than a niche topic.

Spurious correlations allow flexible models to predict well during training but poorly on related test distributions. Recent work has shown that models that satisfy particular independencies involving correlation-inducing nuisance variables have guarantees on their test performance. Enforcing such independencies requires nuisances to be observed during training. However, nuisances, such as demographics or image background labels, are often missing. Enforcing independence on just the observed data does not imply independence on the entire population. Here we derive mmd estimators used for invariance objectives under missing nuisances. On simulations and clinical data, optimizing through these estimates achieves test performance similar to using estimators that make use of the full data.

An avenue for understanding cosmological galaxy formation is to compare morphometric parameters in observations and simulations of galaxy assembly. In this second paper of the ASymba: Asymmetries of HI in SIMBA Galaxies series, we measure atomic gas HI asymmetries in spatially-resolved detections from the untargetted WALLABY survey, and compare them to realizations of WALLABY-like mock samples from the SIMBA cosmological simulations. We develop a Scanline Tracing method to create mock galaxy HI datacubes which minimizes shot noise along the spectral dimension compared to particle-based methods, and therefore spurious asymmetry contributions. We compute 1D and 3D asymmetries for spatially-resolved WALLABY Pilot Survey detections, and find that the highest 3D asymmetries A3D>0.5 stem from interacting systems or detections with strong bridges or tails. We then construct a series of WALLABY-like mock realizations drawn from the SIMBA 50 Mpc simulation volume, and compare their asymmetry distributions. We find that the incidence of high A3D detections is higher in WALLABY than in the SIMBA mocks, but that difference is not statistically significant (p-value = 0.05). The statistical power of quantitative comparisons of asymmetries such as the one presented here will improve as the WALLABY survey progresses, and as simulation volumes and resolutions increase.

Calibration measures and reliability diagrams are two fundamental tools for measuring and interpreting the calibration of probabilistic predictors. Calibration measures quantify the degree of miscalibration, and reliability diagrams visualize the structure of this miscalibration. However, the most common constructions of reliability diagrams and calibration measures -- binning and ECE -- both suffer from well-known flaws (e.g. discontinuity). We show that a simple modification fixes both constructions: first smooth the observations using an RBF kernel, then compute the Expected Calibration Error (ECE) of this smoothed function. We prove that with a careful choice of bandwidth, this method yields a calibration measure that is well-behaved in the sense of (B{\l}asiok, Gopalan, Hu, and Nakkiran 2023a) -- a consistent calibration measure. We call this measure the SmoothECE. Moreover, the reliability diagram obtained from this smoothed function visually encodes the SmoothECE, just as binned reliability diagrams encode the BinnedECE. We also provide a Python package with simple, hyperparameter-free methods for measuring and plotting calibration: `pip install relplot\`.

Metric validation in Grammatical Error Correction (GEC) is currently done by observing the correlation between human and metric-induced rankings. However, such correlation studies are costly, methodologically troublesome, and suffer from low inter-rater agreement. We propose MAEGE, an automatic methodology for GEC metric validation, that overcomes many of the difficulties with existing practices. Experiments with \maege\ shed a new light on metric quality, showing for example that the standard M^2 metric fares poorly on corpus-level ranking. Moreover, we use MAEGE to perform a detailed analysis of metric behavior, showing that correcting some types of errors is consistently penalized by existing metrics.

LLM-as-judge ("grader") components are now standard in evaluation harnesses, including safety evaluations where a pass/fail verdict may gate downstream deployment decisions. A widespread assumption is that setting the grader's sampling temperature to 0 makes grading deterministic. We test this assumption against a real safety-evaluation codebase (Japan AISI's open-source aisev) and show it fails on two levels. First, the harness invokes its grader without setting temperature or seed; the underlying provider silently applies its default of 1.0, so items near the decision boundary flip pass/fail across identical runs (per-item disagreement up to ~50% over 20 runs). Second, pinning temperature=0 reduces but does not eliminate flips: across 690 API calls spanning two providers, three model tiers, and five sampling configurations, 1-2 of 7 borderline items remain non-reproducible even under forced greedy decoding (top_k=1). Claude Opus 4.7/4.8 has since deprecated temperature entirely, rendering the primary mitigation inapplicable to newer model generations. These findings expose a structural gap: evaluation harnesses that report single-run verdicts without variance or grader-disagreement metrics can present noise as a safety property. We release a reproduction harness (690 calls, 7 conditions) and recommend that harnesses treat grader disagreement as a first-class health metric alongside the scores themselves.

Evaluations of LLM systems routinely average over small prompt sets and report models as a ranked table. We ask how much confidence such a table deserves, using LLM-based prompt-structure inference as the case study: eight open model variants across five families and 8B to 675B parameters, caching disabled, 293 raw intermediate representations persisted. The measured phenomenon is unstable to begin with. Identical calls do not reliably recover identical structure, with mean node-set Jaccard from 0.39 to 0.96 and 72% of prompt-model cells never node-set-perfect. Auditing the evaluation weakens its conclusions further, and this is our main contribution. Under a joint cluster bootstrap over prompts, only the bottom of the ranking is firm: the two least reproducible models hold rank in 99% and 86% of replicates, the middle four in 27% to 48%, and the top two in 68% each, so the table identifies the worst model reliably but does not reliably identify the best. Two equally defensible rules for merging repeated campaigns change four of eight rows and move the study-wide headline by 7 percentage points. Checking the inferred structure against ground-truth annotations shows reproducibility cannot be read as accuracy. And four of the eight endpoints were withdrawn within ten weeks of measurement, so the study as specified can no longer be run. Small-sample LLM evaluations can therefore look far more definitive than their evidence supports. We recommend reporting rank stability, per-cell provenance, executed sensitivity comparisons, raw per-run outputs, and a measurement date alongside any ranking.

We present a straightforward statistical test to detect certain violations of the assumption that the data are Independent and Identically Distributed (IID). The specific form of violation considered is common across real-world applications: whether the examples are ordered in the dataset such that almost adjacent examples tend to have more similar feature values (e.g. due to distributional drift, or attractive interactions between datapoints). Based on a k-Nearest Neighbors estimate, our approach can be used to audit any multivariate numeric data as well as other data types (image, text, audio, etc.) that can be numerically represented, perhaps with model embeddings. Compared with existing methods to detect drift or auto-correlation, our approach is both applicable to more types of data and also able to detect a wider variety of IID violations in practice. Code: https://github.com/cleanlab/cleanlab

Recent research has generated hope that inference scaling could allow weaker language models to match or exceed the accuracy of stronger models, such as by repeatedly sampling solutions to a coding problem until it passes unit tests. The central thesis of this paper is that there is no free lunch for inference scaling: indefinite accuracy improvement through resampling can only be realized if the "verifier" (in this case, a set of unit tests) is perfect. When the verifier is imperfect, as it almost always is in domains such as reasoning or coding (for example, unit tests have imperfect coverage), there is a nonzero probability of false positives: incorrect solutions that pass the verifier. Resampling cannot decrease this probability, so it imposes an upper bound to the accuracy of resampling-based inference scaling even with an infinite compute budget. We find that there is a very strong correlation between the model's single-sample accuracy (i.e. accuracy without unit tests) and its false positive rate on coding benchmarks HumanEval and MBPP, whose unit tests have limited coverage. Therefore, no amount of inference scaling of weaker models can enable them to match the single-sample accuracy of a sufficiently strong model (Fig. 1a). When we consider that false positives have a negative utility compared to abstaining from producing a solution, it bends the inference scaling curve further downward. Empirically, we find that the optimal number of samples can be less than 10 under realistic assumptions (Fig. 1b). Finally, we show that beyond accuracy, false positives may have other undesirable qualities, such as poor adherence to coding style conventions.

Social scientists are now using large language models to create "silicon samples" - synthetic datasets intended to stand in for human respondents, aimed at revolutionising human subjects research. However, there are many analytic choices which must be made to produce these samples. Though many of these choices are defensible, their impact on sample quality is poorly understood. I map out these analytic choices and demonstrate how a very small number of decisions can dramatically change the correspondence between silicon samples and human data. Configurations (N = 252) varied substantially in their capacity to estimate (i) rank ordering of participants, (ii) response distributions, and (iii) between-scale correlations. Most critically, configurations were not consistent in quality: those that performed well on one dimension often performed poorly on another, implying that there is no "one-size-fits-all" configuration that optimises the accuracy of these samples. I call for greater attention to the threat of analytic flexibility in using silicon samples.

Large language models are increasingly used as decision aids whose probability judgments shape downstream choices. Whether those judgments carry a systematic directional tilt has been hard to detect: calibration metrics aggregate unsigned errors, and naturalistic uncertainty offers no ground-truth probability. When an LLM rates a startup's success at 70% but its failure at 15%, the missing 15 points expose a distortion no aggregate score flags. We introduce OptimismBench, which detects directional bias with inverted pairs: each scenario elicits both P(success) and P(failure), and asymmetry between the two framings yields a signed bias score without ground truth. Across 16 models from 8 providers, fourteen are optimistic; pessimism appears only in Anthropic's frontier tier. Eleven matched base-versus-chat pairs across four families show post-training sets the sign of the bias, with opposite shifts in different families. The pattern survives prompt, temperature, perspective, and self-debiasing ablations. A seventeen-model six-language comparison further shows model identity dominates language, with inter-model variance at 4.7x inter-language variance. We release 3,870 items across 10 languages for per-model directional-bias auditing. When alignment makes a model more helpful, it also tilts its probabilities; downstream pipelines inherit the tilt by default.

Chinchilla Approach 2 is among the most widely used methods for fitting neural scaling laws. Its parabolic approximation introduces systematic biases in compute-optimal allocation estimates, even on noise-free synthetic data. Applied to published Llama 3 IsoFLOP data at open frontier compute scales, these biases imply a parameter underallocation corresponding to 6.5% of the 3.8times10^{25} FLOP training budget and \1.4M (90% CI: 412K-\2.9M) in unnecessary compute at 50% H100 MFU. Simulated multimodal model misallocations show even greater opportunity costs due to higher loss surface asymmetry. Three sources of this error are examined: IsoFLOP sampling grid width (Taylor approximation accuracy), uncentered IsoFLOP sampling, and loss surface asymmetry (α\neq β$). Chinchilla Approach 3 largely eliminates these biases but is often regarded as less data-efficient, numerically unstable, prone to local minima, and harder to implement. Each concern is shown to be unfounded or addressable, especially when the partially linear structure of the objective is exploited via Variable Projection, enabling unbiased inference on all five loss surface parameters through a two-dimensional optimization that is well-conditioned, analytically differentiable, and amenable to dense, or even exhaustive, grid search. It may serve as a more convenient replacement for Approach 2 or a more scalable alternative for adaptations of Approach 3 to richer scaling law formulations.

A paraphrase-quality audit of MathCheck (ICLR 2025) detected 4 semantically incorrect paraphrases in 129 groups (3.1%); removing them drops GPT-4o from rank 2 to rank 4 and elevates Claude Haiku and DeepSeek V3 above it; these ranking changes are invisible to any single-model evaluation. Cross-model unanimity found these errors automatically (>= 3/4 models for MathCheck; >= 6/9 for our primary evaluation) for under $10; in our own dataset the same protocol found that 47% of auto-generated connective-variation paraphrases were semantically incorrect. That flaw compounds a deeper measurement gap: Claude Haiku 4.5 achieves 86% accuracy yet SCR=50%, meaning half its theorems are answered differently under semantically equivalent restatements, while aggregate accuracy across 9 models spans only 86-96% yet Semantic Consistency Rates (SCR) span 50-82% -- a 32-point gap invisible to standard benchmarks. Formally, for any target ranking over 9 frontier models there exists a weighting over paraphrase families that realizes it (No-Free-Benchmark corollary), because no model Pareto-dominates all families -- so benchmark designers who select families are implicitly choosing which model wins. FormInv supplies the audit protocol (replicated on external benchmarks at 100% recall), SCR and per-theorem Cochran's Q as primary invariance measures evaluated on 9 models across 366-811 items (on Lean4-verified theorems), and FormInvSelector for regime-aware model selection.

Seven years ago, researchers proposed a postprocessing method to equalize the error rates of a model across different demographic groups. The work launched hundreds of papers purporting to improve over the postprocessing baseline. We empirically evaluate these claims through thousands of model evaluations on several tabular datasets. We find that the fairness-accuracy Pareto frontier achieved by postprocessing contains all other methods we were feasibly able to evaluate. In doing so, we address two common methodological errors that have confounded previous observations. One relates to the comparison of methods with different unconstrained base models. The other concerns methods achieving different levels of constraint relaxation. At the heart of our study is a simple idea we call unprocessing that roughly corresponds to the inverse of postprocessing. Unprocessing allows for a direct comparison of methods using different underlying models and levels of relaxation.

We show that pairs of widely separated interferometers are advantageous for measuring the Stokes parameter V of a stochastic background of gravitational waves. This parameter characterizes asymmetry of amplitudes of right- and left-handed waves and generation of the asymmetry is closely related to parity violation in the early universe. The advantageous pairs include LIGO(Livingston)-LCGT and AIGO-Virgo that are relatively insensitive to Omega_GW (the simple intensity of the background). Using at least three detectors, information of the intensity Omega_GW and the degree of asymmetry V can be separately measured.