Daily Papers

In audio signal processing, learnable front-ends have shown strong performance across diverse tasks by optimizing task-specific representation. However, their parameters remain fixed once trained, lacking flexibility during inference and limiting robustness under dynamic complex acoustic environments. In this paper, we introduce a novel adaptive paradigm for audio front-ends that replaces static parameterization with a closed-loop neural controller. Specifically, we simplify the learnable front-end LEAF architecture and integrate a neural controller for adaptive representation via dynamically tuning Per-Channel Energy Normalization. The neural controller leverages both the current and the buffered past subband energies to enable input-dependent adaptation during inference. Experimental results on multiple audio classification tasks demonstrate that the proposed adaptive front-end consistently outperforms prior fixed and learnable front-ends under both clean and complex acoustic conditions. These results highlight neural adaptability as a promising direction for the next generation of audio front-ends.

Multimodal LLMs have made remarkable progress in perceiving the physical world, while their perceptual scope remains largely human-centric, focusing on what humans can directly see or hear. This progress raises the prospect of perception beyond human limits, such as extending hearing to sounds that are inaudible to humans. More broadly, the physical world is full of waves, vibrations, and oscillations, only a small fraction of which are directly audible to humans. This invites the extension of multimodal LLMs toward a broader form of machine hearing, which remains largely underexplored. To investigate this direction, we introduce the Machine Hearing Benchmark (MHB), comprising 6,128 instances across 13 tasks and seven domains. MHB spans highly heterogeneous input regimes, with sampling rates from approximately 10^{-5} to 10^6 Hz, sequence lengths from 10^1 to 10^6 samples, and both single- and multi-channel inputs. Evaluations of current open-source and proprietary Audio LLMs (ALLMs) reveal limited zero-shot transfer to machine hearing. Supervised adaptation on machine-hearing data alone does not close this gap, suggesting that the challenge extends beyond data exposure to a systematic mismatch between existing audio front ends and machine-hearing inputs. To address this mismatch, we introduce MachEar, a lightweight encoder extension that complements the pretrained Audio LLM for machine-hearing inputs. The results show that MachEar equips a pretrained Audio LLM with stronger machine-hearing capabilities while largely preserving its existing audio understanding performance.

Training Transformer-based models demands a large amount of data, while obtaining aligned and labelled data in multimodality is rather cost-demanding, especially for audio-visual speech recognition (AVSR). Thus it makes a lot of sense to make use of unlabelled unimodal data. On the other side, although the effectiveness of large-scale self-supervised learning is well established in both audio and visual modalities, how to integrate those pre-trained models into a multimodal scenario remains underexplored. In this work, we successfully leverage unimodal self-supervised learning to promote the multimodal AVSR. In particular, audio and visual front-ends are trained on large-scale unimodal datasets, then we integrate components of both front-ends into a larger multimodal framework which learns to recognize parallel audio-visual data into characters through a combination of CTC and seq2seq decoding. We show that both components inherited from unimodal self-supervised learning cooperate well, resulting in that the multimodal framework yields competitive results through fine-tuning. Our model is experimentally validated on both word-level and sentence-level tasks. Especially, even without an external language model, our proposed model raises the state-of-the-art performances on the widely accepted Lip Reading Sentences 2 (LRS2) dataset by a large margin, with a relative improvement of 30%.

We propose a learnable content adaptive front end for audio signal processing. Before the modern advent of deep learning, we used fixed representation non-learnable front-ends like spectrogram or mel-spectrogram with/without neural architectures. With convolutional architectures supporting various applications such as ASR and acoustic scene understanding, a shift to a learnable front ends occurred in which both the type of basis functions and the weight were learned from scratch and optimized for the particular task of interest. With the shift to transformer-based architectures with no convolutional blocks present, a linear layer projects small waveform patches onto a small latent dimension before feeding them to a transformer architecture. In this work, we propose a way of computing a content-adaptive learnable time-frequency representation. We pass each audio signal through a bank of convolutional filters, each giving a fixed-dimensional vector. It is akin to learning a bank of finite impulse-response filterbanks and passing the input signal through the optimum filter bank depending on the content of the input signal. A content-adaptive learnable time-frequency representation may be more broadly applicable, beyond the experiments in this paper.

With a recent influx of voice generation methods, the threat introduced by audio DeepFake (DF) is ever-increasing. Several different detection methods have been presented as a countermeasure. Many methods are based on so-called front-ends, which, by transforming the raw audio, emphasize features crucial for assessing the genuineness of the audio sample. Our contribution contains investigating the influence of the state-of-the-art Whisper automatic speech recognition model as a DF detection front-end. We compare various combinations of Whisper and well-established front-ends by training 3 detection models (LCNN, SpecRNet, and MesoNet) on a widely used ASVspoof 2021 DF dataset and later evaluating them on the DF In-The-Wild dataset. We show that using Whisper-based features improves the detection for each model and outperforms recent results on the In-The-Wild dataset by reducing Equal Error Rate by 21%.

Full-duplex speech interaction, as the most natural and intuitive mode of human communication, is driving artificial intelligence toward more human-like conversational systems. Traditional cascaded speech processing pipelines suffer from critical limitations, including accumulated latency, information loss, and error propagation across modules. To address these issues, recent efforts focus on the end-to-end audio large language models (LLMs) like GPT-4o, which primarily unify speech understanding and generation task. However, most of these models are inherently half-duplex, and rely on a suite of separate, task-specific front-end components, such as voice activity detection (VAD) and turn-taking detection (TD). In our development of speech assistant, we observed that optimizing the speech front-end is equally crucial as advancing the back-end unified model for achieving seamless, responsive interactions. To bridge this gap, we propose the first unified audio front-end LLM (UAF) tailored for full-duplex speech systems. Our model reformulates diverse audio front-end tasks into a single auto-regressive sequence prediction problem, including VAD, TD, speaker recognition (SR), automatic speech recognition (ASR) and question answer (QA). It takes streaming fixed-duration audio chunk (e.g., 600 ms) as input, leverages a reference audio prompt to anchor the target speaker at the beginning, and regressively generates discrete tokens encoding both semantic content and system-level state controls (e.g., interruption signals). Experiments demonstrate that our model achieves leading performance across multiple audio front-end tasks and significantly enhances response latency and interruption accuracy in real-world interaction scenarios.

Recent one-step text-to-audio (TTA) models substantially reduce inference cost, yet their generated distributions can still be improved through post-training. We propose DriftAudio, a distributional post-training method that adapts Drifting to pretrained one-step TTA generators. Applying Drifting condition-wise is challenging under free-form text conditioning, where only one or a few real samples are typically available for a particular condition. DriftAudio instead performs Drifting on the marginal audio distribution while retaining text-conditioned generation. The drifting field is estimated in a frozen audio feature space using resampled real samples, a rolling bank of generated samples, and the current batch of generated samples. The resulting Drifting field provides a detached training target for updating only the generator, keeping the original one-step inference procedure. On AudioCaps, starting from MeanAudio, DriftAudio reduces FAD and FD by 33.9% and 17.6%, respectively, while also improving KL and CLAP. Starting from FdAudio, it further reduces FAD, FD, and KL, with trade-offs in IS and CLAP. These results demonstrate the effectiveness of marginal distributional post-training for one-step TTA generation.

Mel-filterbanks are fixed, engineered audio features which emulate human perception and have been used through the history of audio understanding up to today. However, their undeniable qualities are counterbalanced by the fundamental limitations of handmade representations. In this work we show that we can train a single learnable frontend that outperforms mel-filterbanks on a wide range of audio signals, including speech, music, audio events and animal sounds, providing a general-purpose learned frontend for audio classification. To do so, we introduce a new principled, lightweight, fully learnable architecture that can be used as a drop-in replacement of mel-filterbanks. Our system learns all operations of audio features extraction, from filtering to pooling, compression and normalization, and can be integrated into any neural network at a negligible parameter cost. We perform multi-task training on eight diverse audio classification tasks, and show consistent improvements of our model over mel-filterbanks and previous learnable alternatives. Moreover, our system outperforms the current state-of-the-art learnable frontend on Audioset, with orders of magnitude fewer parameters.

Despite recent progress in text-to-audio (TTA) generation, we show that the state-of-the-art models, such as AudioLDM, trained on datasets with an imbalanced class distribution, such as AudioCaps, are biased in their generation performance. Specifically, they excel in generating common audio classes while underperforming in the rare ones, thus degrading the overall generation performance. We refer to this problem as long-tailed text-to-audio generation. To address this issue, we propose a simple retrieval-augmented approach for TTA models. Specifically, given an input text prompt, we first leverage a Contrastive Language Audio Pretraining (CLAP) model to retrieve relevant text-audio pairs. The features of the retrieved audio-text data are then used as additional conditions to guide the learning of TTA models. We enhance AudioLDM with our proposed approach and denote the resulting augmented system as Re-AudioLDM. On the AudioCaps dataset, Re-AudioLDM achieves a state-of-the-art Frechet Audio Distance (FAD) of 1.37, outperforming the existing approaches by a large margin. Furthermore, we show that Re-AudioLDM can generate realistic audio for complex scenes, rare audio classes, and even unseen audio types, indicating its potential in TTA tasks.

Deep neural networks have shown promise for music audio signal processing applications, often surpassing prior approaches, particularly as end-to-end models in the waveform domain. Yet results to date have tended to be constrained by low sample rates, noise, narrow domains of signal types, and/or lack of parameterized controls (i.e. "knobs"), making their suitability for professional audio engineering workflows still lacking. This work expands on prior research published on modeling nonlinear time-dependent signal processing effects associated with music production by means of a deep neural network, one which includes the ability to emulate the parameterized settings you would see on an analog piece of equipment, with the goal of eventually producing commercially viable, high quality audio, i.e. 44.1 kHz sampling rate at 16-bit resolution. The results in this paper highlight progress in modeling these effects through architecture and optimization changes, towards increasing computational efficiency, lowering signal-to-noise ratio, and extending to a larger variety of nonlinear audio effects. Toward these ends, the strategies employed involved a three-pronged approach: model speed, model accuracy, and model generalizability. Most of the presented methods provide marginal or no increase in output accuracy over the original model, with the exception of dataset manipulation. We found that limiting the audio content of the dataset, for example using datasets of just a single instrument, provided a significant improvement in model accuracy over models trained on more general datasets.

Streaming video-to-audio (V2A) generation is essential for immersive interactive applications. However, real-time constraints leave existing streaming V2A methods far behind offline models: (1) visual frontends shrink their receptive fields to cut look-ahead latency, severely degrading audio-visual alignment; (2) causal autoregressive diffusion backends denoise each audio patch in isolation, impairing audio quality. To this end, we present LiveFoley, a streaming causal autoregressive diffusion architecture that addresses both bottlenecks with imperceptible latency. For the visual frontend, we introduce a Trailing Sliding Window that converts non-causal segment-level encoders into streaming modules without retraining. By simply realigning the window, it preserves precise audio-visual alignment, while a configurable hop size reduces the frontend look-ahead well below the human perceptual threshold. Building on this tunable hop size, we propose the Unified Varhop Framework to accommodate scenarios with diverse latency and computation budgets. For the audio backend, we explore widening the denoising window of the local diffusion transformer (LocDiT) head in two temporal directions. History LocDiT adds past context to improve quality at no latency cost and serves as our default. Alternatively, Future-Warmup LocDiT breaks the autoregressive deadlock with an approximate future condition, further improving generation quality at the cost of an acceptable backend look-ahead. Extensive experiments demonstrate that LiveFoley matches offline models in temporal alignment and leads streaming systems in generation quality. Project page: https://dalision.github.io/livefoley-page/

Text-to-music models allow users to generate nearly realistic musical audio with textual commands. However, editing music audios remains challenging due to the conflicting desiderata of performing fine-grained alterations on the audio while maintaining a simple user interface. To address this challenge, we propose Audio Prompt Adapter (or AP-Adapter), a lightweight addition to pretrained text-to-music models. We utilize AudioMAE to extract features from the input audio, and construct attention-based adapters to feedthese features into the internal layers of AudioLDM2, a diffusion-based text-to-music model. With 22M trainable parameters, AP-Adapter empowers users to harness both global (e.g., genre and timbre) and local (e.g., melody) aspects of music, using the original audio and a short text as inputs. Through objective and subjective studies, we evaluate AP-Adapter on three tasks: timbre transfer, genre transfer, and accompaniment generation. Additionally, we demonstrate its effectiveness on out-of-domain audios containing unseen instruments during training.

Modern front-end design for speech deepfake detection relies on full fine-tuning of large pre-trained models like XLSR. However, this approach is not parameter-efficient and may lead to suboptimal generalization to realistic, in-the-wild data types. To address these limitations, we introduce a new family of parameter-efficient front-ends that fuse prompt-tuning with classical signal processing transforms. These include FourierPT-XLSR, which uses the Fourier Transform, and two variants based on the Wavelet Transform: WSPT-XLSR and Partial-WSPT-XLSR. We further propose WaveSP-Net, a novel architecture combining a Partial-WSPT-XLSR front-end and a bidirectional Mamba-based back-end. This design injects multi-resolution features into the prompt embeddings, which enhances the localization of subtle synthetic artifacts without altering the frozen XLSR parameters. Experimental results demonstrate that WaveSP-Net outperforms several state-of-the-art models on two new and challenging benchmarks, Deepfake-Eval-2024 and SpoofCeleb, with low trainable parameters and notable performance gains. The code and models are available at https://github.com/xxuan-acoustics/WaveSP-Net.

With the rapid development of spatial audio technologies today, applications in AR, VR, and other scenarios have garnered extensive attention. Unlike traditional mono sound, spatial audio offers a more realistic and immersive auditory experience. Despite notable progress in the field, there remains a lack of comprehensive surveys that systematically organize and analyze these methods and their underlying technologies. In this paper, we provide a comprehensive overview of spatial audio and systematically review recent literature in the area. To address this, we chronologically outlining existing work related to spatial audio and categorize these studies based on input-output representations, as well as generation and understanding tasks, thereby summarizing various research aspects of spatial audio. In addition, we review related datasets, evaluation metrics, and benchmarks, offering insights from both training and evaluation perspectives. Related materials are available at https://github.com/dieKarotte/ASAudio.

This survey paper provides a comprehensive overview of the recent advancements and challenges in applying large language models to the field of audio signal processing. Audio processing, with its diverse signal representations and a wide range of sources--from human voices to musical instruments and environmental sounds--poses challenges distinct from those found in traditional Natural Language Processing scenarios. Nevertheless, Large Audio Models, epitomized by transformer-based architectures, have shown marked efficacy in this sphere. By leveraging massive amount of data, these models have demonstrated prowess in a variety of audio tasks, spanning from Automatic Speech Recognition and Text-To-Speech to Music Generation, among others. Notably, recently these Foundational Audio Models, like SeamlessM4T, have started showing abilities to act as universal translators, supporting multiple speech tasks for up to 100 languages without any reliance on separate task-specific systems. This paper presents an in-depth analysis of state-of-the-art methodologies regarding Foundational Large Audio Models, their performance benchmarks, and their applicability to real-world scenarios. We also highlight current limitations and provide insights into potential future research directions in the realm of Large Audio Models with the intent to spark further discussion, thereby fostering innovation in the next generation of audio-processing systems. Furthermore, to cope with the rapid development in this area, we will consistently update the relevant repository with relevant recent articles and their open-source implementations at https://github.com/EmulationAI/awesome-large-audio-models.

Hearables are becoming ubiquitous, yet their sound controls remain blunt: users can either enable global noise suppression or focus on a single target sound. Real-world acoustic scenes, however, contain many simultaneous sources that users may want to adjust independently. We introduce Aurchestra, the first system to provide fine-grained, real-time soundscape control on resource-constrained hearables. Our system has two key components: (1) a dynamic interface that surfaces only active sound classes and (2) a real-time, on-device multi-output extraction network that generates separate streams for each selected class, achieving robust performance for upto 5 overlapping target sounds, and letting users mix their environment by customizing per-class volumes, much like an audio engineer mixes tracks. We optimize the model architecture for multiple compute-limited platforms and demonstrate real-time performance on 6 ms streaming audio chunks. Across real-world environments in previously unseen indoor and outdoor scenarios, our system enables expressive per-class sound control and achieves substantial improvements in target-class enhancement and interference suppression. Our results show that the world need not be heard as a single, undifferentiated stream: with Aurchestra, the soundscape becomes truly programmable.

Current leading Text-To-Audio (TTA) generation models suffer from degraded performance on zero-shot and few-shot settings. It is often challenging to generate high-quality audio for audio events that are unseen or uncommon in the training set. Inspired by the success of Retrieval-Augmented Generation (RAG) in Large Language Model (LLM)-based knowledge-intensive tasks, we extend the TTA process with additional conditioning contexts. We propose Audiobox TTA-RAG, a novel retrieval-augmented TTA approach based on Audiobox, a conditional flow-matching audio generation model. Unlike the vanilla Audiobox TTA solution which generates audio conditioned on text, we augmented the conditioning input with retrieved audio samples that provide additional acoustic information to generate the target audio. Our retrieval method does not require the external database to have labeled audio, offering more practical use cases. To evaluate our proposed method, we curated test sets in zero-shot and few-shot settings. Our empirical results show that the proposed model can effectively leverage the retrieved audio samples and significantly improve zero-shot and few-shot TTA performance, with large margins on multiple evaluation metrics, while maintaining the ability to generate semantically aligned audio for the in-domain setting. In addition, we investigate the effect of different retrieval methods and data sources.

While rendering and animation of photorealistic 3D human body models have matured and reached an impressive quality over the past years, modeling the spatial audio associated with such full body models has been largely ignored so far. In this work, we present a framework that allows for high-quality spatial audio generation, capable of rendering the full 3D soundfield generated by a human body, including speech, footsteps, hand-body interactions, and others. Given a basic audio-visual representation of the body in form of 3D body pose and audio from a head-mounted microphone, we demonstrate that we can render the full acoustic scene at any point in 3D space efficiently and accurately. To enable near-field and realtime rendering of sound, we borrow the idea of volumetric primitives from graphical neural rendering and transfer them into the acoustic domain. Our acoustic primitives result in an order of magnitude smaller soundfield representations and overcome deficiencies in near-field rendering compared to previous approaches.

We present MGAudio, a novel flow-based framework for open-domain video-to-audio generation, which introduces model-guided dual-role alignment as a central design principle. Unlike prior approaches that rely on classifier-based or classifier-free guidance, MGAudio enables the generative model to guide itself through a dedicated training objective designed for video-conditioned audio generation. The framework integrates three main components: (1) a scalable flow-based Transformer model, (2) a dual-role alignment mechanism where the audio-visual encoder serves both as a conditioning module and as a feature aligner to improve generation quality, and (3) a model-guided objective that enhances cross-modal coherence and audio realism. MGAudio achieves state-of-the-art performance on VGGSound, reducing FAD to 0.40, substantially surpassing the best classifier-free guidance baselines, and consistently outperforms existing methods across FD, IS, and alignment metrics. It also generalizes well to the challenging UnAV-100 benchmark. These results highlight model-guided dual-role alignment as a powerful and scalable paradigm for conditional video-to-audio generation. Code is available at: https://github.com/pantheon5100/mgaudio

The audio research community depends on open generative models as foundational tools for building novel approaches and establishing baselines. In this report, we present Woosh, Sony AI's publicly released sound effect foundation model, detailing its architecture, training process, and an evaluation against other popular open models. Being optimized for sound effects, we provide (1) a high-quality audio encoder/decoder model and (2) a text-audio alignment model for conditioning, together with (3) text-to-audio and (4) video-to-audio generative models. Distilled text-to-audio and video-to-audio models are also included in the release, allowing for low-resource operation and fast inference. Our evaluation on both public and private data shows competitive or better performance for each module when compared to existing open alternatives like StableAudio-Open and TangoFlux. Inference code and model weights are available at https://github.com/SonyResearch/Woosh. Demo samples can be found at https://sonyresearch.github.io/Woosh/.

We introduce StyleFusion-TTS, a prompt and/or audio referenced, style and speaker-controllable, zero-shot text-to-speech (TTS) synthesis system designed to enhance the editability and naturalness of current research literature. We propose a general front-end encoder as a compact and effective module to utilize multimodal inputs including text prompts, audio references, and speaker timbre references in a fully zero-shot manner and produce disentangled style and speaker control embeddings. Our novel approach also leverages a hierarchical conformer structure for the fusion of style and speaker control embeddings, aiming to achieve optimal feature fusion within the current advanced TTS architecture. StyleFusion-TTS is evaluated through multiple metrics, both subjectively and objectively. The system shows promising performance across our evaluations, suggesting its potential to contribute to the advancement of the field of zero-shot text-to-speech synthesis.

PlugSonic is a suite of web- and mobile-based applications for the curation and experience of binaural interactive soundscapes and sonic narratives. It was developed as part of the PLUGGY EU project (Pluggable Social Platform for Heritage Awareness and Participation) and consists of two main applications: PlugSonic Sample, to edit and apply audio effects, and PlugSonic Soundscape, to create and experience binaural soundscapes. The audio processing within PlugSonic is based on the Web Audio API and the 3D Tune-In Toolkit, while the exploration of soundscapes in a physical space is obtained using Apple's ARKit. In this paper we present the design choices, the user involvement processes and the implementation details. The main goal of PlugSonic is technology democratisation; PlugSonic users - whether institutions or citizens - are all given the instruments needed to create, process and experience 3D soundscapes and sonic narrative; without the need for specific devices, external tools (software and/or hardware), specialised knowledge or custom development. The evaluation, which was conducted with inexperienced users on three tasks - creation, curation and experience - demonstrates how PlugSonic is indeed a simple, effective, yet powerful tool.

Deep learning models are mostly used in an offline inference fashion. However, this strongly limits the use of these models inside audio generation setups, as most creative workflows are based on real-time digital signal processing. Although approaches based on recurrent networks can be naturally adapted to this buffer-based computation, the use of convolutions still poses some serious challenges. To tackle this issue, the use of causal streaming convolutions have been proposed. However, this requires specific complexified training and can impact the resulting audio quality. In this paper, we introduce a new method allowing to produce non-causal streaming models. This allows to make any convolutional model compatible with real-time buffer-based processing. As our method is based on a post-training reconfiguration of the model, we show that it is able to transform models trained without causal constraints into a streaming model. We show how our method can be adapted to fit complex architectures with parallel branches. To evaluate our method, we apply it on the recent RAVE model, which provides high-quality real-time audio synthesis. We test our approach on multiple music and speech datasets and show that it is faster than overlap-add methods, while having no impact on the generation quality. Finally, we introduce two open-source implementation of our work as Max/MSP and PureData externals, and as a VST audio plugin. This allows to endow traditional digital audio workstation with real-time neural audio synthesis on a laptop CPU.

Audio is an inherently interactive modality, yet today's Large Audio Language Models (LALMs) are offline, and streaming audio models each handle only a single task such as streaming ASR or voice chatting. It is time to unify them into one online LALM: a model that, through an always-on perceive-decide-respond loop, listens to sound, environment, and instructions in real time and reacts on the fly. We formalize this regime as the Audio Interaction Model, and realize it with Audio-Interaction, a unified streaming model that retains offline task execution while adding online general audio instruction following, from dialogue to full voice chatting, deciding when to respond from the semantics of the stream. To enable this, we propose SoundFlow, a framework that instantiates the perceive-decide-respond loop end to end, from data to training to deployment, through streaming-native data construction, comprehension-aware training, and asynchronous low-latency inference for stable real-time interaction. We further construct StreamAudio-2M, a 2.6M-item streaming corpus spanning 7 fundamental abilities and 28 sub-tasks, and Proactive-Sound-Bench for evaluating proactive audio intervention. Across 8 benchmarks, Audio-Interaction preserves competitive performance on mainstream audio tasks while unlocking capabilities inaccessible to offline LALMs, including real-time ASR, streaming audio instruction following, and proactive help.

In this work we present a data-driven approach for predicting the behavior of (i.e., profiling) a given non-linear audio signal processing effect (henceforth "audio effect"). Our objective is to learn a mapping function that maps the unprocessed audio to the processed by the audio effect to be profiled, using time-domain samples. To that aim, we employ a deep auto-encoder model that is conditioned on both time-domain samples and the control parameters of the target audio effect. As a test-case study, we focus on the offline profiling of two dynamic range compression audio effects, one software-based and the other analog. Compressors were chosen because they are a widely used and important set of effects and because their parameterized nonlinear time-dependent nature makes them a challenging problem for a system aiming to profile "general" audio effects. Results from our experimental procedure show that the primary functional and auditory characteristics of the compressors can be captured, however there is still sufficient audible noise to merit further investigation before such methods are applied to real-world audio processing workflows.

Audio super-resolution is a fundamental task that predicts high-frequency components for low-resolution audio, enhancing audio quality in digital applications. Previous methods have limitations such as the limited scope of audio types (e.g., music, speech) and specific bandwidth settings they can handle (e.g., 4kHz to 8kHz). In this paper, we introduce a diffusion-based generative model, AudioSR, that is capable of performing robust audio super-resolution on versatile audio types, including sound effects, music, and speech. Specifically, AudioSR can upsample any input audio signal within the bandwidth range of 2kHz to 16kHz to a high-resolution audio signal at 24kHz bandwidth with a sampling rate of 48kHz. Extensive objective evaluation on various audio super-resolution benchmarks demonstrates the strong result achieved by the proposed model. In addition, our subjective evaluation shows that AudioSR can acts as a plug-and-play module to enhance the generation quality of a wide range of audio generative models, including AudioLDM, Fastspeech2, and MusicGen. Our code and demo are available at https://audioldm.github.io/audiosr.

Natural turn-taking in full-duplex voice interaction requires determining from partial speech whether a pause reflects hesitation or a completed conversational intent. Acoustic voice activity detection lacks this semantic information, while cascaded ASR-based endpointing introduces transcription dependence and additional processing stages. We formulate semantic endpoint detection as a causal audio-language reasoning task and introduce FD-VAD, an ASR-free streaming endpointer that maps bounded causal audio windows directly to Continue/Stop decisions. FD-VAD combines a frozen speech encoder with a lightweight modality adapter and a parameter-efficiently adapted language model, using a last-chunk training objective for streaming inference. We further introduce confidence-gated endpoint commitment to control interruption versus delay and boundary-focused hard-negative sampling to improve decisions around ambiguous turn boundaries. Across in-domain and conversational evaluations, FD-VAD outperforms strong streaming and non-streaming semantic turn classifiers, and achieves the highest EOT recall among qualifying systems on TurnBench dev set 0.853 (at FP<=0.10) in a zero-shot setting. These results show that semantic endpointing can be performed directly from streaming audio without intermediate ASR or dialogue state tracking.

Despite progress in video-to-audio generation, the field focuses predominantly on mono output, lacking spatial immersion. Existing binaural approaches remain constrained by a two-stage pipeline that first generates mono audio and then performs spatialization, often resulting in error accumulation and spatio-temporal inconsistencies. To address this limitation, we introduce the task of end-to-end binaural spatial audio generation directly from silent video. To support this task, we present the BiAudio dataset, comprising approximately 97K video-binaural audio pairs spanning diverse real-world scenes and camera rotation trajectories, constructed through a semi-automated pipeline. Furthermore, we propose ViSAudio, an end-to-end framework that employs conditional flow matching with a dual-branch audio generation architecture, where two dedicated branches model the audio latent flows. Integrated with a conditional spacetime module, it balances consistency between channels while preserving distinctive spatial characteristics, ensuring precise spatio-temporal alignment between audio and the input video. Comprehensive experiments demonstrate that ViSAudio outperforms existing state-of-the-art methods across both objective metrics and subjective evaluations, generating high-quality binaural audio with spatial immersion that adapts effectively to viewpoint changes, sound-source motion, and diverse acoustic environments. Project website: https://kszpxxzmc.github.io/ViSAudio-project.

Visual speech recognition models extract visual features in a hierarchical manner. At the lower level, there is a visual front-end with a limited temporal receptive field that processes the raw pixels depicting the lips or faces. At the higher level, there is an encoder that attends to the embeddings produced by the front-end over a large temporal receptive field. Previous work has focused on improving the visual front-end of the model to extract more useful features for speech recognition. Surprisingly, our work shows that complex visual front-ends are not necessary. Instead of allocating resources to a sophisticated visual front-end, we find that a linear visual front-end paired with a larger Conformer encoder results in lower latency, more efficient memory usage, and improved WER performance. We achieve a new state-of-the-art of 12.8% WER for visual speech recognition on the TED LRS3 dataset, which rivals the performance of audio-only models from just four years ago.

Personalised speech enhancement (PSE), which extracts only the speech of a target user and removes everything else from a recorded audio clip, can potentially improve users' experiences of audio AI modules deployed in the wild. To support a large variety of downstream audio tasks, such as real-time ASR and audio-call enhancement, a PSE solution should operate in a streaming mode, i.e., input audio cleaning should happen in real-time with a small latency and real-time factor. Personalisation is typically achieved by extracting a target speaker's voice profile from an enrolment audio, in the form of a static embedding vector, and then using it to condition the output of a PSE model. However, a fixed target speaker embedding may not be optimal under all conditions. In this work, we present a streaming Transformer-based PSE model and propose a novel cross-attention approach that gives adaptive target speaker representations. We present extensive experiments and show that our proposed cross-attention approach outperforms competitive baselines consistently, even when our model is only approximately half the size.

Text-guided audio editing aims to modify the language-specified acoustic content while preserving edit-irrelevant source components. Existing training-free methods typically rely on inversion-based editing. While inversion-free editing is appealing as it decreases computational overhead and reconstruction errors, it remains largely unexplored for audio editing. The key challenge is to construct a source-to-target editing path through diffusion denoising dynamics. In this paper, we introduce DirectAudioEdit, the first attempt to develop a training-free and inversion-free method for audio editing. Experiments on music and event-level benchmarks across two backbones show that DirectAudioEdit reduces macro-averaged FAD and KL by 15.9% and 15.8% compared with DDPM inversion, while achieving up to 64.5% editing speedup.

Text-to-audio diffusion models produce high-fidelity audio but require tens of function evaluations (NFEs), incurring multi-second latency and limited throughput. We present SoundWeaver, the first training-free, model-agnostic serving system that accelerates text-to-audio diffusion by warm-starting from semantically similar cached audio. SoundWeaver introduces three components: a Reference Selector that retrieves and temporally aligns cached candidates via semantic and duration-aware gating; a Skip Gater that dynamically determines the percentage of NFEs to skip; and a lightweight Cache Manager that maintains cache utility through quality-aware eviction and refinement. On real-world audio traces, SoundWeaver achieves 1.8--3.0 times latency reduction with a cache of only {sim}1K entries while preserving or improving perceptual quality.

In this paper, we introduce SoloAudio, a novel diffusion-based generative model for target sound extraction (TSE). Our approach trains latent diffusion models on audio, replacing the previous U-Net backbone with a skip-connected Transformer that operates on latent features. SoloAudio supports both audio-oriented and language-oriented TSE by utilizing a CLAP model as the feature extractor for target sounds. Furthermore, SoloAudio leverages synthetic audio generated by state-of-the-art text-to-audio models for training, demonstrating strong generalization to out-of-domain data and unseen sound events. We evaluate this approach on the FSD Kaggle 2018 mixture dataset and real data from AudioSet, where SoloAudio achieves the state-of-the-art results on both in-domain and out-of-domain data, and exhibits impressive zero-shot and few-shot capabilities. Source code and demos are released.

Autoregressive next-token prediction with the Transformer decoder has become a de facto standard in large language models (LLMs), achieving remarkable success in Natural Language Processing (NLP) at scale. Extending this paradigm to audio poses unique challenges due to its inherently continuous nature. We research audio generation with a causal language model (LM) without discrete tokens. We leverage token-wise diffusion to model the continuous distribution of the next continuous-valued token. Our approach delivers significant improvements over previous discrete solution, AudioGen, achieving 20% and 40% relative gains on AudioCaps in Frechet Audio Distance (FAD) and Kullback-Leibler (KL) divergence, respectively. Additionally, we propose a novel masked next-token prediction task that incorporates masked prediction into the causal LM framework. On AudioCaps, the innovation yields 41% and 33% relative FAD improvements over AudioGen Base (285M) and AudioGen Large (1B) models, respectively, and is on par with the state-of-the-art (SOTA) diffusion models. Furthermore, we achieve these results with significantly fewer parameters -- 193M for our Base and 462M for our Large models.

Existing single-domain and multi-task audio systems remain limited in directly organizing heterogeneous audio components, ambience, and multiple roles into long-form temporal scenes. We present Qwen-Audio-3.0-Gen-Preview, a unified non-autoregressive framework that uses a Diffusion Transformer (DiT) and a shared variational autoencoder (VAE) to generate the complete mixed waveform. Prompt enhancement converts free-form requests into structured temporal records that are rendered as textual conditions, while a two-stage data curriculum and semantic conditional views train the proposed model to use these conditions across standalone and mixed-scene audio. A shared continuous VAE compresses 48kHz stereo waveforms into 25Hz latent sequences and incorporates semantic supervision, providing one representation for heterogeneous audio. On the public reference-conditioned benchmark, speaker similarity is the proposed model's clearest strength across all three subsets. Across the multi-speaker and rich-timeline benchmarks, its clearest comparative strengths are cross-turn consistency in both languages and temporal localization, respectively. On AudioCaps, its advantages are concentrated in evaluations using large audio-language models and AudioBox. These results demonstrate the potential of unified generation for temporally structured audio without task-specific branches.

Video-to-audio (V2A) generation aims to synthesize realistic audio that is both semantically consistent with and temporally synchronized to a silent video. Despite recent progress, many methods still rely on multi-stage training, resulting in high computational costs and long runtimes, or transform visual input into text to leverage pretrained text-to-audio models, sacrificing fine-grained temporal cues. To overcome these limitations, we propose Flowley, an end-to-end, single-stage training architecture that produces soundtracks by combining visual features with textual prompts. Crucially, we introduce Progressive Soft-masked Cross-Attention, which embeds audio-visual synchronization directly within its attention mechanism, adding zero additional computational cost compared to standard attention layers. We further observe that existing V2A benchmarks lack sound-oriented descriptive captions, which can potentially degrade the quality of the synthesized audio. To remedy this, we propose SoundCap, a plug-and-play pipeline for creating detailed, sound-aware captions that guide the model. Remarkably, without integrating any pretrained audio-visual alignment modules, Flowley achieves state-of-the-art performance on VGGSound across multiple metrics. Moreover, by incorporating SoundCap, we further exceed the performance of the strongest existing close-sourced methods in terms of audio quality in the zero-shot setting.

Audio effects are extensively used at every stage of audio and music content creation. The majority of differentiable audio effects modeling approaches fall into the black-box or gray-box paradigms; and most models have been proposed and applied to nonlinear effects like guitar amplifiers, overdrive, distortion, fuzz and compressor. Although a plethora of architectures have been introduced for the task at hand there is still lack of understanding on the state of the art, since most publications experiment with one type of nonlinear audio effect and a very small number of devices. In this work we aim to shed light on the audio effects modeling landscape by comparing black-box and gray-box architectures on a large number of nonlinear audio effects, identifying the most suitable for a wide range of devices. In the process, we also: introduce time-varying gray-box models and propose models for compressor, distortion and fuzz, publish a large dataset for audio effects research - ToneTwist AFx https://github.com/mcomunita/tonetwist-afx-dataset - that is also the first open to community contributions, evaluate models on a variety of metrics and conduct extensive subjective evaluation. Code https://github.com/mcomunita/nablafx and supplementary material https://github.com/mcomunita/nnlinafx-supp-material are also available.

Audio generation has long been fragmented, with speech, music, and sound effects produced by domain-specific models that fail to jointly generate coherent audio scenes from a single description. The key obstacles are insufficient fine-grained supervision for real-world mixed audio and limited acoustic representations for modeling concurrent audio components. We present Dasheng AudioGen, a unified framework for generating general mixed-audio scenes from text. Dasheng AudioGen introduces structured multi-view captions, which explicitly decouple complex acoustic scenes into complementary description views, thereby enabling fine-grained control over audio layers. Furthermore, we employ a high-dimensional unified semantic-acoustic representation as the shared latent space. It injects semantic priors that facilitate cross-modal training convergence, while its high-dimensional feature space provides sufficient capacity to disentangle and fuse concurrent audio components effectively. With these designs, a simple flow-matching DiT achieves high-quality end-to-end audio scene generation. We also establish a comprehensive evaluation pipeline for audio scene generation. Experiments demonstrate that Dasheng AudioGen achieves performance approaching real-world recordings in mixed-audio categories, while remaining competitive with specialized models in single-type generation tasks. Demos are available at https://nieeim.github.io/Dasheng-AudioGen-Web/.

Large-scale multimodal generative modeling has created milestones in text-to-image and text-to-video generation. Its application to audio still lags behind for two main reasons: the lack of large-scale datasets with high-quality text-audio pairs, and the complexity of modeling long continuous audio data. In this work, we propose Make-An-Audio with a prompt-enhanced diffusion model that addresses these gaps by 1) introducing pseudo prompt enhancement with a distill-then-reprogram approach, it alleviates data scarcity with orders of magnitude concept compositions by using language-free audios; 2) leveraging spectrogram autoencoder to predict the self-supervised audio representation instead of waveforms. Together with robust contrastive language-audio pretraining (CLAP) representations, Make-An-Audio achieves state-of-the-art results in both objective and subjective benchmark evaluation. Moreover, we present its controllability and generalization for X-to-Audio with "No Modality Left Behind", for the first time unlocking the ability to generate high-definition, high-fidelity audios given a user-defined modality input. Audio samples are available at https://Text-to-Audio.github.io

Audio-conditioned language models often underuse acoustic cues such as prosody, emotion, and non-speech sounds, raising the question of whether ASR-supervised frontends discard this information before it reaches the LM. We test whether the frontend is responsible by comparing Whisper-Tiny and Whisper-Small with EnCodec, DAC-VAE, and WavTokenizer in a shared Qwen3.5-4B audio-LM pipeline on ASR, emotion recognition, and sound captioning. Encoder replacement alone does not resolve this underuse: Whisper variants remain strongest overall, including on emotion and environmental sound captioning. To localize the failure, we trace task-relevant information through the encoder, projector, LM layers, and LM head. Linear probes and geometric analyses show that discriminative acoustic structure remains recoverable at the final LM layer, even when MCQA accuracy trails probe accuracy by up to 83 points. Because the answer format and decoding procedure are controlled, this task-dependent gap points to content-specific readout failure rather than generic format bias. LogitLens analyses and a targeted LM head intervention support the conclusion that acoustic underuse is not explained solely by encoder-side information loss and that readout alignment can be a dominant bottleneck.

This paper delineates AISHELL-5, the first open-source in-car multi-channel multi-speaker Mandarin automatic speech recognition (ASR) dataset. AISHLL-5 includes two parts: (1) over 100 hours of multi-channel speech data recorded in an electric vehicle across more than 60 real driving scenarios. This audio data consists of four far-field speech signals captured by microphones located on each car door, as well as near-field signals obtained from high-fidelity headset microphones worn by each speaker. (2) a collection of 40 hours of real-world environmental noise recordings, which supports the in-car speech data simulation. Moreover, we also provide an open-access, reproducible baseline system based on this dataset. This system features a speech frontend model that employs speech source separation to extract each speaker's clean speech from the far-field signals, along with a speech recognition module that accurately transcribes the content of each individual speaker. Experimental results demonstrate the challenges faced by various mainstream ASR models when evaluated on the AISHELL-5. We firmly believe the AISHELL-5 dataset will significantly advance the research on ASR systems under complex driving scenarios by establishing the first publicly available in-car ASR benchmark.

Text-to-spatial audio generation, such as text-to-First-Order Ambisonics (FOA), provides a convenient way to create spatial audio for billion-dollar gaming and film industries. However, existing text-to-FOA methods are largely data-driven and may produce audio that violates acoustic relations between source direction and distance. They also separate descriptive and parametric control, forcing users to trade usability for precision. In this paper, we present PhysWave, a physics-guided latent diffusion model for controllable text-to-FOA generation. PhysWave unifies natural-language and trajectory control through a shared waypoint-caption representation, and augments diffusion training with two differentiable acoustic priors: spherical-harmonic direction consistency and inverse-square distance consistency. To support dynamic spatial generation, we further construct a 300K-clip FOA dataset with diverse sound categories and source trajectories. Extensive results show that the proposed priors help PhysWave generate spatially consistent FOA audio while maintaining competitive audio quality. Further analyses show that these physics priors improve spatial consistency during training and can also be used as inference-time guidance for training-free spatial refinement.

Recent advancements in deep generative models present new opportunities for music production but also pose challenges, such as high computational demands and limited audio quality. Moreover, current systems frequently rely solely on text input and typically focus on producing complete musical pieces, which is incompatible with existing workflows in music production. To address these issues, we introduce "Diff-A-Riff," a Latent Diffusion Model designed to generate high-quality instrumental accompaniments adaptable to any musical context. This model offers control through either audio references, text prompts, or both, and produces 48kHz pseudo-stereo audio while significantly reducing inference time and memory usage. We demonstrate the model's capabilities through objective metrics and subjective listening tests, with extensive examples available on the accompanying website: sonycslparis.github.io/diffariff-companion/

Full-duplex speech-to-speech (S2S) models provide natural, low-latency conversational interaction and would benefit from the ability to use external tools and complete voice-agent tasks. We propose a frontend-backend architecture where a duplex speech-to-text frontend learns to emit a delegation token and forwards streaming ASR transcripts to a text-based backend LLM for tool calls. Tool-call results from the backend are injected back into the frontend through a lightweight prefill-and-repeat mechanism and then synthesized using streaming TTS to the user. Our approach largely preserves regular duplex turn-taking, interruption handling, and low-latency interaction as it requires minimal modifications to the frontend model. In a single-turn tool-call evaluation, our system achieves 92-97% tool-call recall, competitive tool-call prediction performance, and 81.2% accuracy in rejecting irrelevant calls. When equipped with a larger backend (e.g., Qwen3-235B-A22B), our system achieves competitive results on Full-Duplex-Bench-V3 compared to open and closed source models, and significantly outperforms GPT-realtime-mini and Qwen3-Omni-30B-A3B-Instruct on EVA-Bench. These results demonstrate that backend delegation is an effective and modular approach for combining natural duplex speech interaction with strong agentic tool-call capabilities.

We propose FlowDec, a neural full-band audio codec for general audio sampled at 48 kHz that combines non-adversarial codec training with a stochastic postfilter based on a novel conditional flow matching method. Compared to the prior work ScoreDec which is based on score matching, we generalize from speech to general audio and move from 24 kbit/s to as low as 4 kbit/s, while improving output quality and reducing the required postfilter DNN evaluations from 60 to 6 without any fine-tuning or distillation techniques. We provide theoretical insights and geometric intuitions for our approach in comparison to ScoreDec as well as another recent work that uses flow matching, and conduct ablation studies on our proposed components. We show that FlowDec is a competitive alternative to the recent GAN-dominated stream of neural codecs, achieving FAD scores better than those of the established GAN-based codec DAC and listening test scores that are on par, and producing qualitatively more natural reconstructions for speech and harmonic structures in music.

Generating long-form 44.1kHz stereo audio from text prompts can be computationally demanding. Further, most previous works do not tackle that music and sound effects naturally vary in their duration. Our research focuses on the efficient generation of long-form, variable-length stereo music and sounds at 44.1kHz using text prompts with a generative model. Stable Audio is based on latent diffusion, with its latent defined by a fully-convolutional variational autoencoder. It is conditioned on text prompts as well as timing embeddings, allowing for fine control over both the content and length of the generated music and sounds. Stable Audio is capable of rendering stereo signals of up to 95 sec at 44.1kHz in 8 sec on an A100 GPU. Despite its compute efficiency and fast inference, it is one of the best in two public text-to-music and -audio benchmarks and, differently from state-of-the-art models, can generate music with structure and stereo sounds.

We present Kimi-Audio, an open-source audio foundation model that excels in audio understanding, generation, and conversation. We detail the practices in building Kimi-Audio, including model architecture, data curation, training recipe, inference deployment, and evaluation. Specifically, we leverage a 12.5Hz audio tokenizer, design a novel LLM-based architecture with continuous features as input and discrete tokens as output, and develop a chunk-wise streaming detokenizer based on flow matching. We curate a pre-training dataset that consists of more than 13 million hours of audio data covering a wide range of modalities including speech, sound, and music, and build a pipeline to construct high-quality and diverse post-training data. Initialized from a pre-trained LLM, Kimi-Audio is continual pre-trained on both audio and text data with several carefully designed tasks, and then fine-tuned to support a diverse of audio-related tasks. Extensive evaluation shows that Kimi-Audio achieves state-of-the-art performance on a range of audio benchmarks including speech recognition, audio understanding, audio question answering, and speech conversation. We release the codes, model checkpoints, as well as the evaluation toolkits in https://github.com/MoonshotAI/Kimi-Audio.

We study two foundational problems in audio language models: (1) how to design an audio tokenizer that can serve as an intermediate representation for both understanding and generation; and (2) how to build an audio foundation model that generalizes in few-shot and zero-shot settings, analogous to large language models. To this end, we make the following two contributions. First, we propose ReasoningCodec, a discrete audio codec that factorizes audio into (i) reasoning tokens, which encode text-aligned, high-level analysis and planning representations for audio understanding and hierarchical generation, and (ii) reconstruction tokens, which encode semantic-rich acoustic cues for high-fidelity waveform reconstruction. This design achieves understanding performance comparable to strong continuous representations while improving generation quality and reconstruction fidelity over prior discrete tokenizers. Second, we introduce a unified autoregressive architecture for text and audio, together with multi-stage training and multi-task data construction. Using this framework, we train UniAudio 2.0 on 100B text tokens and 60B audio tokens. Across a wide range of speech, sound, and music tasks, UniAudio 2.0 performs competitively on in-domain evaluations and demonstrates strong few-shot and zero-shot generalization to unseen tasks. Demo, code, and checkpoints will be available at https://dongchaoyang.top/UniAudio2Demo/{https://dongchaoyang.top/UniAudio2Demo/}.

Text-to-audio (TTA) system has recently gained attention for its ability to synthesize general audio based on text descriptions. However, previous studies in TTA have limited generation quality with high computational costs. In this study, we propose AudioLDM, a TTA system that is built on a latent space to learn the continuous audio representations from contrastive language-audio pretraining (CLAP) latents. The pretrained CLAP models enable us to train LDMs with audio embedding while providing text embedding as a condition during sampling. By learning the latent representations of audio signals and their compositions without modeling the cross-modal relationship, AudioLDM is advantageous in both generation quality and computational efficiency. Trained on AudioCaps with a single GPU, AudioLDM achieves state-of-the-art TTA performance measured by both objective and subjective metrics (e.g., frechet distance). Moreover, AudioLDM is the first TTA system that enables various text-guided audio manipulations (e.g., style transfer) in a zero-shot fashion. Our implementation and demos are available at https://audioldm.github.io.

Large Audio-Language Models (LALMs) are often constrained by short audio context windows, even when their text backbones support long contexts, limiting long-form audio understanding. Prior work has introduced context-extension methods (e.g. YaRN) on unimodal LLMs, yet their application to LALMs remains unexplored. First, building on RoPE-based context extension, we introduce Partial YaRN, a training-free, audio-only extension method that modifies only audio token positions, leaving text positions intact to preserve the base LLM's text capabilities. Second, we propose Virtual Longform Audio Training (VLAT), a training strategy that extends Partial YaRN into a training-time positional augmentation. VLAT simulates diverse audio lengths during training, enabling generalization to inputs far longer than those seen in training and improving robustness for long-context audio understanding. Our experiments on SALMONN and Qwen2-Audio show that Partial YaRN outperforms the original models across wide range of settings, and VLAT training strategy provides substantial improvement, achieving strong performance on long audio of unseen lengths.

In this work, we focus on front-end design for speech deepfake detectors, the component that determines the discriminative acoustic cues provided to the classifier. Existing approaches are primarily categorized into two types. Hand-crafted filterbank features are transparent but limited in capturing higher-level information. SSL features, in turn, lack interpretability and may overlook fine-grained spectral anomalies. We propose the WST-X series, a novel family of feature extractors that combines the best of both worlds via the wavelet scattering transform (WST), which cascades wavelet convolutions with modulus nonlinearities to produce deformation-stable, multi-scale features. Experiments on the recent Deepfake-Eval-2024 benchmark, together with cross-dataset evaluations on the SpoofCeleb and In-the-Wild, show that WST-X outperforms existing front-ends by a wide margin. Our analysis reveals that a small averaging scale (J), combined with high-frequency and directional resolutions (Q, L), is critical for capturing subtle artifacts. This underscores the value of stable and translation-invariant features for speech deepfake detection. The code is available at https://github.com/xxuan-acoustics/WST-X-Series.

Many existing audio processing and generation models rely on task-specific architectures, resulting in fragmented development efforts and limited extensibility. It is therefore promising to design a unified framework capable of handling multiple tasks, while providing robust instruction and audio understanding and high-quality audio generation. This requires a compatible paradigm design, a powerful backbone, and a high-fidelity audio reconstruction module. To meet these requirements, this technical report introduces QuarkAudio, a decoder-only autoregressive (AR) LM-based generative framework that unifies multiple tasks. The framework includes a unified discrete audio tokenizer, H-Codec, which incorporates self-supervised learning (SSL) representations into the tokenization and reconstruction process. We further propose several improvements to H-Codec, such as a dynamic frame-rate mechanism and extending the audio sampling rate to 48 kHz. QuarkAudio unifies tasks by using task-specific conditional information as the conditioning sequence of the decoder-only LM, and predicting discrete target audio tokens in an AR manner. The framework supports a wide range of audio processing and generation tasks, including speech restoration (SR), target speaker extraction (TSE), speech separation (SS), voice conversion (VC), and language-queried audio source separation (LASS). In addition, we extend downstream tasks to universal free-form audio editing guided by natural language instructions (including speech semantic editing and audio event editing). Experimental results show that H-Codec achieves high-quality audio reconstruction with a low frame rate, improving both the efficiency and performance of downstream audio generation, and that QuarkAudio delivers competitive or comparable performance to state-of-the-art task-specific or multi-task systems across multiple tasks.

Beamforming has been extensively investigated for multi-channel audio processing tasks. Recently, learning-based beamforming methods, sometimes called neural beamformers, have achieved significant improvements in both signal quality (e.g. signal-to-noise ratio (SNR)) and speech recognition (e.g. word error rate (WER)). Such systems are generally non-causal and require a large context for robust estimation of inter-channel features, which is impractical in applications requiring low-latency responses. In this paper, we propose filter-and-sum network (FaSNet), a time-domain, filter-based beamforming approach suitable for low-latency scenarios. FaSNet has a two-stage system design that first learns frame-level time-domain adaptive beamforming filters for a selected reference channel, and then calculate the filters for all remaining channels. The filtered outputs at all channels are summed to generate the final output. Experiments show that despite its small model size, FaSNet is able to outperform several traditional oracle beamformers with respect to scale-invariant signal-to-noise ratio (SI-SNR) in reverberant speech enhancement and separation tasks. Moreover, when trained with a frequency-domain objective function on the CHiME-3 dataset, FaSNet achieves 14.3\% relative word error rate reduction (RWERR) compared with the baseline model. These results show the efficacy of FaSNet particularly in reverberant and noisy signal conditions.

Low frequency oscillator (LFO) driven audio effects such as phaser, flanger, and chorus, modify an input signal using time-varying filters and delays, resulting in characteristic sweeping or widening effects. It has been shown that these effects can be modeled using neural networks when conditioned with the ground truth LFO signal. However, in most cases, the LFO signal is not accessible and measurement from the audio signal is nontrivial, hindering the modeling process. To address this, we propose a framework capable of extracting arbitrary LFO signals from processed audio across multiple digital audio effects, parameter settings, and instrument configurations. Since our system imposes no restrictions on the LFO signal shape, we demonstrate its ability to extract quasiperiodic, combined, and distorted modulation signals that are relevant to effect modeling. Furthermore, we show how coupling the extraction model with a simple processing network enables training of end-to-end black-box models of unseen analog or digital LFO-driven audio effects using only dry and wet audio pairs, overcoming the need to access the audio effect or internal LFO signal. We make our code available and provide the trained audio effect models in a real-time VST plugin.

Prevailing Video-to-Audio (V2A) generation models operate offline, assuming an entire video sequence or chunks of frames are available beforehand. This critically limits their use in interactive applications such as live content creation and emerging generative world models. To address this gap, we introduce the novel task of frame-level online V2A generation, where a model autoregressively generates audio from video without access to future video frames. Furthermore, we propose SoundReactor, which, to the best of our knowledge, is the first simple yet effective framework explicitly tailored for this task. Our design enforces end-to-end causality and targets low per-frame latency with audio-visual synchronization. Our model's backbone is a decoder-only causal transformer over continuous audio latents. For vision conditioning, it leverages grid (patch) features extracted from the smallest variant of the DINOv2 vision encoder, which are aggregated into a single token per frame to maintain end-to-end causality and efficiency. The model is trained through a diffusion pre-training followed by consistency fine-tuning to accelerate the diffusion head decoding. On a benchmark of diverse gameplay videos from AAA titles, our model successfully generates semantically and temporally aligned, high-quality full-band stereo audio, validated by both objective and human evaluations. Furthermore, our model achieves low per-frame waveform-level latency (26.3ms with the head NFE=1, 31.5ms with NFE=4) on 30FPS, 480p videos using a single H100. Demo samples are available at https://koichi-saito-sony.github.io/soundreactor/.

Recent advances in audio generation have focused on text-to-audio (T2A) and video-to-audio (V2A) tasks. However, T2A or V2A methods cannot generate holistic sounds (onscreen and off-screen). This is because T2A cannot generate sounds aligning with onscreen objects, while V2A cannot generate semantically complete (offscreen sounds missing). In this work, we address the task of holistic audio generation: given a video and a text prompt, we aim to generate both onscreen and offscreen sounds that are temporally synchronized with the video and semantically aligned with text and video. Previous approaches for joint text and video-to-audio generation often suffer from modality bias, favoring one modality over the other. To overcome this limitation, we introduce VinTAGe, a flow-based transformer model that jointly considers text and video to guide audio generation. Our framework comprises two key components: a Visual-Text Encoder and a Joint VT-SiT model. To reduce modality bias and improve generation quality, we employ pretrained uni-modal text-to-audio and video-to-audio generation models for additional guidance. Due to the lack of appropriate benchmarks, we also introduce VinTAGe-Bench, a dataset of 636 video-text-audio pairs containing both onscreen and offscreen sounds. Our comprehensive experiments on VinTAGe-Bench demonstrate that joint text and visual interaction is necessary for holistic audio generation. Furthermore, VinTAGe achieves state-of-the-art results on the VGGSound benchmark. Our source code and pre-trained models will be released. Demo is available at: https://www.youtube.com/watch?v=QmqWhUjPkJI.

Binaural rendering aims to synthesize binaural audio that mimics natural hearing based on a mono audio and the locations of the speaker and listener. Although many methods have been proposed to solve this problem, they struggle with rendering quality and streamable inference. Synthesizing high-quality binaural audio that is indistinguishable from real-world recordings requires precise modeling of binaural cues, room reverb, and ambient sounds. Additionally, real-world applications demand streaming inference. To address these challenges, we propose a flow matching based streaming binaural speech synthesis framework called BinauralFlow. We consider binaural rendering to be a generation problem rather than a regression problem and design a conditional flow matching model to render high-quality audio. Moreover, we design a causal U-Net architecture that estimates the current audio frame solely based on past information to tailor generative models for streaming inference. Finally, we introduce a continuous inference pipeline incorporating streaming STFT/ISTFT operations, a buffer bank, a midpoint solver, and an early skip schedule to improve rendering continuity and speed. Quantitative and qualitative evaluations demonstrate the superiority of our method over SOTA approaches. A perceptual study further reveals that our model is nearly indistinguishable from real-world recordings, with a 42% confusion rate.

Generating sound effects for videos often requires creating artistic sound effects that diverge significantly from real-life sources and flexible control in the sound design. To address this problem, we introduce MultiFoley, a model designed for video-guided sound generation that supports multimodal conditioning through text, audio, and video. Given a silent video and a text prompt, MultiFoley allows users to create clean sounds (e.g., skateboard wheels spinning without wind noise) or more whimsical sounds (e.g., making a lion's roar sound like a cat's meow). MultiFoley also allows users to choose reference audio from sound effects (SFX) libraries or partial videos for conditioning. A key novelty of our model lies in its joint training on both internet video datasets with low-quality audio and professional SFX recordings, enabling high-quality, full-bandwidth (48kHz) audio generation. Through automated evaluations and human studies, we demonstrate that MultiFoley successfully generates synchronized high-quality sounds across varied conditional inputs and outperforms existing methods. Please see our project page for video results: https://ificl.github.io/MultiFoley/

Understanding and reasoning over non-speech sounds and music are crucial for both humans and AI agents to interact effectively with their environments. In this paper, we introduce Audio Flamingo 2 (AF2), an Audio-Language Model (ALM) with advanced audio understanding and reasoning capabilities. AF2 leverages (i) a custom CLAP model, (ii) synthetic Audio QA data for fine-grained audio reasoning, and (iii) a multi-stage curriculum learning strategy. AF2 achieves state-of-the-art performance with only a 3B parameter small language model, surpassing large open-source and proprietary models across over 20 benchmarks. Next, for the first time, we extend audio understanding to long audio segments (30 secs to 5 mins) and propose LongAudio, a large and novel dataset for training ALMs on long audio captioning and question-answering tasks. Fine-tuning AF2 on LongAudio leads to exceptional performance on our proposed LongAudioBench, an expert annotated benchmark for evaluating ALMs on long audio understanding capabilities. We conduct extensive ablation studies to confirm the efficacy of our approach. Project Website: https://research.nvidia.com/labs/adlr/AF2/.

We tackle the problem of generating audio samples conditioned on descriptive text captions. In this work, we propose AaudioGen, an auto-regressive generative model that generates audio samples conditioned on text inputs. AudioGen operates on a learnt discrete audio representation. The task of text-to-audio generation poses multiple challenges. Due to the way audio travels through a medium, differentiating ``objects'' can be a difficult task (e.g., separating multiple people simultaneously speaking). This is further complicated by real-world recording conditions (e.g., background noise, reverberation, etc.). Scarce text annotations impose another constraint, limiting the ability to scale models. Finally, modeling high-fidelity audio requires encoding audio at high sampling rate, leading to extremely long sequences. To alleviate the aforementioned challenges we propose an augmentation technique that mixes different audio samples, driving the model to internally learn to separate multiple sources. We curated 10 datasets containing different types of audio and text annotations to handle the scarcity of text-audio data points. For faster inference, we explore the use of multi-stream modeling, allowing the use of shorter sequences while maintaining a similar bitrate and perceptual quality. We apply classifier-free guidance to improve adherence to text. Comparing to the evaluated baselines, AudioGen outperforms over both objective and subjective metrics. Finally, we explore the ability of the proposed method to generate audio continuation conditionally and unconditionally. Samples: https://felixkreuk.github.io/audiogen

Although the design and application of audio effects is well understood, the inverse problem of removing these effects is significantly more challenging and far less studied. Recently, deep learning has been applied to audio effect removal; however, existing approaches have focused on narrow formulations considering only one effect or source type at a time. In realistic scenarios, multiple effects are applied with varying source content. This motivates a more general task, which we refer to as general purpose audio effect removal. We developed a dataset for this task using five audio effects across four different sources and used it to train and evaluate a set of existing architectures. We found that no single model performed optimally on all effect types and sources. To address this, we introduced RemFX, an approach designed to mirror the compositionality of applied effects. We first trained a set of the best-performing effect-specific removal models and then leveraged an audio effect classification model to dynamically construct a graph of our models at inference. We found our approach to outperform single model baselines, although examples with many effects present remain challenging.

Modern audio generation predominantly relies on latent-space compression, introducing additional complexity and potential information loss. In this work, we challenge this paradigm with WavFlow, a framework that generates high-fidelity audio directly in raw waveform space without intermediate representations. To overcome the inherent difficulties of modeling high-dimensional and low-energy signals, we reshape audio into 2D token grids through waveform patchify and introduce amplitude lifting to align signal scales, enabling stable optimization via direct x-prediction in flow matching. To capture complex semantic alignment and temporal synchronization, we leverage an automated data pipeline to curate 5 million high-quality video-text-audio triplets, allowing the model to learn fine-grained acoustic patterns from scratch. Experimental results show that WavFlow achieves competitive performance on the video-to-audio benchmark VGGSound (FD_PaSST: 59.98, IS_PANNs: 17.40, DeSync: 0.44) and the text-to-audio benchmark AudioCaps (FD_PANNs: 10.63, IS_PANNs: 12.62), matching or exceeding the performance of established latent-based methods. Our work demonstrates that intermediate compression is not a prerequisite for high-quality synthesis, offering a simpler and more scalable alternative for multimodal audio generation.

This work introduces Text2FX, a method that leverages CLAP embeddings and differentiable digital signal processing to control audio effects, such as equalization and reverberation, using open-vocabulary natural language prompts (e.g., "make this sound in-your-face and bold"). Text2FX operates without retraining any models, relying instead on single-instance optimization within the existing embedding space, thus enabling a flexible, scalable approach to open-vocabulary sound transformations through interpretable and disentangled FX manipulation. We show that CLAP encodes valuable information for controlling audio effects and propose two optimization approaches using CLAP to map text to audio effect parameters. While we demonstrate with CLAP, this approach is applicable to any shared text-audio embedding space. Similarly, while we demonstrate with equalization and reverberation, any differentiable audio effect may be controlled. We conduct a listener study with diverse text prompts and source audio to evaluate the quality and alignment of these methods with human perception. Demos and code are available at anniejchu.github.io/text2fx.

While recent few-step sampling text-to-audio generation models like MeanAudio substantially accelerate generation by modeling average velocities, their strict one-step generation quality still lags significantly behind multi-step counterparts. We propose FdAudio to bridge this gap. Unlike MeanAudio, which relies solely on regression against target velocity fields, our post-training approach optimizes the final one-step distribution directly across pre-trained embedding spaces via a multi-representation Fréchet-distance (FD) loss. Crucially, to prevent the multi-step degradation that naive post-training with FD-loss causes, we introduce a MeanFlow consistency objective as a structural anchor. Results demonstrate that FdAudio establishes state-of-the-art one-step T2A generation quality among few-step systems, yielding an 11.4% reduction in FD score and a 28.8% improvement in FAD score relative to the baseline MeanAudio framework. Notably, we solve FD post-training's naive multi-step degradation issue by proposing the MeanFlow anchor, enabling a 25-step sampling path to maintain high-fidelity audio synthesis that matches or surpasses strong multi-step models at a fraction of their computational latency.

Open generative models are vitally important for the community, allowing for fine-tunes and serving as baselines when presenting new models. However, most current text-to-audio models are private and not accessible for artists and researchers to build upon. Here we describe the architecture and training process of a new open-weights text-to-audio model trained with Creative Commons data. Our evaluation shows that the model's performance is competitive with the state-of-the-art across various metrics. Notably, the reported FDopenl3 results (measuring the realism of the generations) showcase its potential for high-quality stereo sound synthesis at 44.1kHz.

Text-to-speech systems often face a trade-off between natural prosody and efficient inference: higher perceptual quality typically comes at increased computational cost and latency. We present TontaubeV1, a model that preserves natural prosody while enabling streaming from a single consumer GPU. Speech is encoded by the hierarchical DualCodec representation at 12.5 Hz, which separates a semantic stream from successive acoustic refinements. Our design assumes that prosodic structure is largely established when the semantic stream is generated, and allocates capacity accordingly: a Qwen3-1.7B-derived transformer predicts that stream and thereby the utterance duration, while three progressively smaller Qwen3-0.6B-derived transformers each add one acoustic refinement. Text is tokenized per character rather than by subword. Paired text and audio markers at shared positions support long-form generation with bounded context, and overlapping DualCodec reconstructions are mapped into the VibeVoice acoustic latent space and decoded causally, enabling streaming despite DualCodec's noncausal decoder. The model accepts up to one minute of reference audio for voice conditioning and is designed primarily for English and German, with additional multilingual support. The four predictors total 2.9B parameters; on a single RTX 5090 the streaming path reaches approximately 200 ms to first audio. In separate non-streaming measurements, the end-to-end real-time factor (RTF) is 0.08 for one input and the aggregate RTF is 0.02 across eight concurrent inputs. On our LLM-as-a-judge audiobook-reading benchmark, TontaubeV1 matches ElevenLabs Flash v2.5 and outperforms Fish Audio S2 Pro, the April 2026 Gradium API, and Cartesia Sonic 3 on prosody. The model weights are released on Hugging Face under the Tontaube Community Model License 1.0.

Inspired by the recent progress in self-supervised learning for computer vision that generates supervision using data augmentations, we explore a new general-purpose audio representation learning approach. We propose learning general-purpose audio representation from a single audio segment without expecting relationships between different time segments of audio samples. To implement this principle, we introduce Bootstrap Your Own Latent (BYOL) for Audio (BYOL-A, pronounced "viola"), an audio self-supervised learning method based on BYOL for learning general-purpose audio representation. Unlike most previous audio self-supervised learning methods that rely on agreement of vicinity audio segments or disagreement of remote ones, BYOL-A creates contrasts in an augmented audio segment pair derived from a single audio segment. With a combination of normalization and augmentation techniques, BYOL-A achieves state-of-the-art results in various downstream tasks. Extensive ablation studies also clarified the contribution of each component and their combinations.

While efficient architectures and a plethora of augmentations for end-to-end image classification tasks have been suggested and heavily investigated, state-of-the-art techniques for audio classifications still rely on numerous representations of the audio signal together with large architectures, fine-tuned from large datasets. By utilizing the inherited lightweight nature of audio and novel audio augmentations, we were able to present an efficient end-to-end network with strong generalization ability. Experiments on a variety of sound classification sets demonstrate the effectiveness and robustness of our approach, by achieving state-of-the-art results in various settings. Public code is available at: https://github.com/Alibaba-MIIL/AudioClassfication{this http url}

Audio mixing style encompasses the artistic and technical decisions a mix engineer makes, including level balancing, spatialization, and the choice, ordering, and parameterization of audio effects (FX) on each stem. FX chains are a key determinant of this style, yet existing approaches to modeling them remain limited. Some operate on stereo mixtures without explicit per-stem FX chain modeling, others fix the number or type of effects per track, and many require differentiable effect implementations or scarce multitrack datasets. We present StemFX, a framework that learns mixing style representations by autoregressively predicting variable-length FX chains on source-separated stems. A Transformer decoder predicts tokenized FX chains autoregressively, while a band-split multi-band CNN encoder with FiLM conditioning captures per-stem spectral structure. To enable large-scale paired training, we extract pseudo-stems from about 105K songs via source separation and augment them using MultiAFx, a toolkit unifying 85 audio effects from 7 Python libraries. Evaluated on mixing style retrieval, StemFX outperforms all baseline models across all tested chain lengths. On paired mixing style transfer, StemFX achieves the best spectral fidelity and the highest listener preference, over 4000 times faster than iterative optimization.

Personalized head-related transfer functions (HRTFs) are essential for spatial audio rendering, but densely measuring an individual's HRTFs is costly and time-consuming. HRTF upsampling reduces this burden by estimating dense HRTFs from sparse measurements. Recent learning-based methods have achieved promising performance, but many remain tied to predefined measurement configurations. In this work, we propose GeoAtt, a variable-context HRTF upsampling framework that uses a single trained model across varying measurement configurations. GeoAtt performs geometry-aware, query-conditioned spatial aggregation over the available measurements independently at each frequency bin, followed by frequency-domain modeling using Conformer blocks. The relative geometry between the target and measured directions is incorporated as an additive bias in the cross-attention. Experiments on the SONICOM dataset show that a single trained model achieves the lowest log-spectral distortion across all four canonical Listener Acoustic Personalization (LAP) challenge measurement configurations and further generalizes to configurations that are not explicitly included during training.

Given a target sound, finding the synthesizer preset that best reproduces it remains a core problem in sound design. Existing methods treat synthesis parameters as flat vectors, discarding the signal routing and parameter interactions that produce audio. We make two contributions. First, to learn a representation of parameters including their signal routing, we design a graph neural network whose message passing structure imitates FM signal processing. Second, we adapt the multimodal objective from SLAP to learn joint embeddings of audio and FM synthesizer parameters, enabling preset retrieval from a gallery. We focus on the Yamaha DX7, where six identical sinusoid operators interact according to one of 32 routing topologies. Our graph encoder's message passing weights are shared across all nodes and layers, enabling processing of arbitrary topologies of any size. When every topology is seen during training, the DX7-GNN and two baselines achieve strong audio-to-preset retrieval. When some topologies are held out for testing, the DX7-GNN substantially outperforms both baselines despite having the fewest parameters. Our ablations further support the claim that imitating FM signal flow in a parameter encoder improves generalization to unseen topologies.

Generating combined visual and auditory sensory experiences is critical for the consumption of immersive content. Recent advances in neural generative models have enabled the creation of high-resolution content across multiple modalities such as images, text, speech, and videos. Despite these successes, there remains a significant gap in the generation of high-quality spatial audio that complements generated visual content. Furthermore, current audio generation models excel in either generating natural audio or speech or music but fall short in integrating spatial audio cues necessary for immersive experiences. In this work, we introduce SEE-2-SOUND, a zero-shot approach that decomposes the task into (1) identifying visual regions of interest; (2) locating these elements in 3D space; (3) generating mono-audio for each; and (4) integrating them into spatial audio. Using our framework, we demonstrate compelling results for generating spatial audio for high-quality videos, images, and dynamic images from the internet, as well as media generated by learned approaches.

Given the recent surge in developments of deep learning, this article provides a review of the state-of-the-art deep learning techniques for audio signal processing. Speech, music, and environmental sound processing are considered side-by-side, in order to point out similarities and differences between the domains, highlighting general methods, problems, key references, and potential for cross-fertilization between areas. The dominant feature representations (in particular, log-mel spectra and raw waveform) and deep learning models are reviewed, including convolutional neural networks, variants of the long short-term memory architecture, as well as more audio-specific neural network models. Subsequently, prominent deep learning application areas are covered, i.e. audio recognition (automatic speech recognition, music information retrieval, environmental sound detection, localization and tracking) and synthesis and transformation (source separation, audio enhancement, generative models for speech, sound, and music synthesis). Finally, key issues and future questions regarding deep learning applied to audio signal processing are identified.

Electronic synthesizer sounds are controlled by presets, parameters settings that yield complex timbral characteristics and ADSR envelopes, making preset conversion particularly challenging. Recent approaches to timbre transfer often rely on spectral objectives or implicit style matching, offering limited control over envelope shaping. Moreover, public synthesizer datasets rarely provide diverse coverage of timbres and ADSR envelopes. To address these gaps, we present SynthCloner, a factorized codec model that disentangles audio into three attributes: ADSR envelope, timbre, and content. This separation enables expressive synthesizer preset conversion with independent control over these three attributes. Additionally, we introduce SynthCAT, a new synthesizer dataset with a task-specific rendering pipeline covering 250 timbres, 120 ADSR envelopes, and 100 MIDI sequences. Experiments show that SynthCloner outperforms baselines on both objective and subjective metrics, while enabling independent attribute control. The code, model checkpoint, and audio examples are available at https://buffett0323.github.io/synthcloner/.

We introduce a novel pipeline for joint audio-visual editing that enhances the coherence between edited video and its accompanying audio. Our approach first applies state-of-the-art video editing techniques to produce the target video, then performs audio editing to align with the visual changes. To achieve this, we present a new video-to-audio generation model that conditions on the source audio, target video, and a text prompt. We extend the model architecture to incorporate conditional audio input and propose a data augmentation strategy that improves training efficiency. Furthermore, our model dynamically adjusts the influence of the source audio based on the complexity of the edits, preserving the original audio structure where possible. Experimental results demonstrate that our method outperforms existing approaches in maintaining audio-visual alignment and content integrity.

Generative models are capable to address difficult problems with non-unique solutions like bandwidth extension and gap filling, removing highly non-linear artifacts from codecs, clipping and distortion, as opposed to removing linear additive components like noise and reverb. While large offline processing models have shown impressive results, these tasks have not been solved with real-time capable models with low latency and compute. We propose a few-step flow matching model using Data Prediction Mean Flows in combination with suitable novel low-latency architecture to make flow matching models an attractive choice under theses constraints. Compared to state-of-the-art, our proposed mean flow model uses 120x less compute and introduces no algorithmic latency other than the STFT, while achieving similar audio quality.

Neural audio autoencoders create compact latent representations that preserve perceptually important information, serving as the foundation for both modern audio compression systems and generation approaches like next-token prediction and latent diffusion. Despite their prevalence, most audio processing operations, such as spatial and spectral up-sampling, still inefficiently operate on raw waveforms or spectral representations rather than directly on these compressed representations. We propose a framework that performs audio processing operations entirely within an autoencoder's latent space, eliminating the need to decode to raw audio formats. Our approach dramatically simplifies training by operating solely in the latent domain, with a latent L1 reconstruction term, augmented by a single latent adversarial discriminator. This contrasts sharply with raw-audio methods that typically require complex combinations of multi-scale losses and discriminators. Through experiments in bandwidth extension and mono-to-stereo up-mixing, we demonstrate computational efficiency gains of up to 100x while maintaining quality comparable to post-processing on raw audio. This work establishes a more efficient paradigm for audio processing pipelines that already incorporate autoencoders, enabling significantly faster and more resource-efficient workflows across various audio tasks.

With the rise of generative AI technology, anyone can now easily create and deploy AI-generated music, which has heightened the need for technical solutions to address copyright and ownership issues. While existing works mainly focused on short-audio, the challenge of full-audio detection, which requires modeling long-term structure and context, remains insufficiently explored. To address this, we propose an improved version of the Segment Transformer, termed the Fusion Segment Transformer. As in our previous work, we extract content embeddings from short music segments using diverse feature extractors. Furthermore, we enhance the architecture for full-audio AI-generated music detection by introducing a Gated Fusion Layer that effectively integrates content and structural information, enabling the capture of long-term context. Experiments on the SONICS and AIME datasets show that our approach outperforms the previous model and recent baselines, achieving state-of-the-art results in AI-generated music detection.

We present LiveBand, a real-time system that generates high-fidelity music accompaniments to live audio input, respecting strict causal constraints. Our method trains a causal transformer generator in the continuous latent space of a pre-trained causal audio autoencoder, using adversarial sequence-level supervision from a discriminator. At each timestep, the generator receives only the causally available mix context and Gaussian noise, and predicts accompaniment latents without access to future mix frames or ground-truth target latents. Training is performed in a single parallel forward pass under causal masking, while streaming inference proceeds autoregressively with a rolling attention state. The model's training and inference computations are matched by design, eliminating teacher forcing and the associated exposure bias. On a multi-instrument music accompaniment benchmark, LiveBand improves over prior work on objective measures of audio quality, beat alignment, and mix adherence, while enabling real-time streaming generation without lookahead into the future on consumer hardware.

In recent years, Text-to-Audio Generation has achieved remarkable progress, offering sound creators powerful tools to transform textual inspirations into vivid audio. However, existing models predominantly operate directly in the acoustic latent space of a Variational Autoencoder (VAE), often leading to suboptimal alignment between generated audio and textual descriptions. In this paper, we introduce SemanticAudio, a novel framework that conducts both audio generation and editing directly in a high-level semantic space. We define this semantic space as a compact representation capturing the global identity and temporal sequence of sound events, distinct from fine-grained acoustic details. SemanticAudio employs a two-stage Flow Matching architecture: the Semantic Planner first generates these compact semantic features to sketch the global semantic layout, and the Acoustic Synthesizer subsequently produces high-fidelity acoustic latents conditioned on this semantic plan. Leveraging this decoupled design, we further introduce a training-free text-guided editing mechanism that enables precise attribute-level modifications on general audio without retraining. Specifically, this is achieved by steering the semantic generation trajectory via the difference of velocity fields derived from source and target text prompts. Extensive experiments demonstrate that SemanticAudio surpasses existing mainstream approaches in semantic alignment. Demo available at: https://semanticaudio1.github.io/

We present SoundStorm, a model for efficient, non-autoregressive audio generation. SoundStorm receives as input the semantic tokens of AudioLM, and relies on bidirectional attention and confidence-based parallel decoding to generate the tokens of a neural audio codec. Compared to the autoregressive generation approach of AudioLM, our model produces audio of the same quality and with higher consistency in voice and acoustic conditions, while being two orders of magnitude faster. SoundStorm generates 30 seconds of audio in 0.5 seconds on a TPU-v4. We demonstrate the ability of our model to scale audio generation to longer sequences by synthesizing high-quality, natural dialogue segments, given a transcript annotated with speaker turns and a short prompt with the speakers' voices.

Generating coherent audio scenes that simultaneously blend speech, music, and sound effects remains a significant challenge. Current approaches typically rely on a disjointed pipeline where a frozen, decoupled text encoder feeds a separate audio decoder, limiting cross-modal optimization and leading to poor speech intelligibility. To overcome these limitations, we introduce MiDashengLM-Gen, an end-to-end framework that couples a pre-trained Large Language Model (LLM) with per-token conditional flow matching for autoregressive, variable-length mixed-audio scene generation. MiDashengLM-Gen represents a first approach for general text-to-audio generation with one end-to-end trained model. Empirical evaluations demonstrate that MiDashengLM-Gen drastically improves speech intelligibility over existing unified models. On the Seed-TTS benchmark, English Word Error Rate (WER) drops from 12.15% to 2.79%, approaching the performance of dedicated Text-to-Speech (TTS) systems (1.24%). Furthermore, the framework extends effectively to multilingual settings, yielding highly competitive multilingual WERs compared to existing baselines. Lastly, the model maintains competitive mixed-audio generation quality on the MECAT benchmark. Code and checkpoints are available at https://github.com/xiaomi-research/midashenglm-gen and https://huggingface.co/mispeech/midashenglm-gen, and the demo page is available at https://xingws.github.io/midashenglm-gen-demo/.

In daily life, we encounter a variety of sounds, both desirable and undesirable, with limited control over their presence and volume. Our work introduces "Listen, Chat, and Edit" (LCE), a novel multimodal sound mixture editor that modifies each sound source in a mixture based on user-provided text instructions. LCE distinguishes itself with a user-friendly chat interface and its unique ability to edit multiple sound sources simultaneously within a mixture, without needing to separate them. Users input open-vocabulary text prompts, which are interpreted by a large language model to create a semantic filter for editing the sound mixture. The system then decomposes the mixture into its components, applies the semantic filter, and reassembles it into the desired output. We developed a 160-hour dataset with over 100k mixtures, including speech and various audio sources, along with text prompts for diverse editing tasks like extraction, removal, and volume control. Our experiments demonstrate significant improvements in signal quality across all editing tasks and robust performance in zero-shot scenarios with varying numbers and types of sound sources.

Building artificial intelligence (AI) systems on top of a set of foundation models (FMs) is becoming a new paradigm in AI research. Their representative and generative abilities learnt from vast amounts of data can be easily adapted and transferred to a wide range of downstream tasks without extra training from scratch. However, leveraging FMs in cross-modal generation remains under-researched when audio modality is involved. On the other hand, automatically generating semantically-relevant sound from visual input is an important problem in cross-modal generation studies. To solve this vision-to-audio (V2A) generation problem, existing methods tend to design and build complex systems from scratch using modestly sized datasets. In this paper, we propose a lightweight solution to this problem by leveraging foundation models, specifically CLIP, CLAP, and AudioLDM. We first investigate the domain gap between the latent space of the visual CLIP and the auditory CLAP models. Then we propose a simple yet effective mapper mechanism (V2A-Mapper) to bridge the domain gap by translating the visual input between CLIP and CLAP spaces. Conditioned on the translated CLAP embedding, pretrained audio generative FM AudioLDM is adopted to produce high-fidelity and visually-aligned sound. Compared to previous approaches, our method only requires a quick training of the V2A-Mapper. We further analyze and conduct extensive experiments on the choice of the V2A-Mapper and show that a generative mapper is better at fidelity and variability (FD) while a regression mapper is slightly better at relevance (CS). Both objective and subjective evaluation on two V2A datasets demonstrate the superiority of our proposed method compared to current state-of-the-art approaches - trained with 86% fewer parameters but achieving 53% and 19% improvement in FD and CS, respectively.

Recent developments in diffusion- and flow- based models have significantly advanced Text-to-Audio Generation (TTA). While achieving great synthesis quality and controllability, current TTA systems still suffer from slow inference speed, which significantly limits their practical applicability. This paper presents MeanAudio, a novel MeanFlow-based model tailored for fast and faithful text-to-audio generation. Built on a Flux-style latent transformer, MeanAudio regresses the average velocity field during training, enabling fast generation by mapping directly from the start to the endpoint of the flow trajectory. By incorporating classifier-free guidance (CFG) into the training target, MeanAudio incurs no additional cost in the guided sampling process. To further stabilize training, we propose an instantaneous-to-mean curriculum with flow field mix-up, which encourages the model to first learn the foundational instantaneous dynamics, and then gradually adapt to mean flows. This strategy proves critical for enhancing training efficiency and generation quality. Experimental results demonstrate that MeanAudio achieves state-of-the-art performance in single-step audio generation. Specifically, it achieves a real time factor (RTF) of 0.013 on a single NVIDIA RTX 3090, yielding a 100x speedup over SOTA diffusion-based TTA systems. Moreover, MeanAudio also demonstrates strong performance in multi-step generation, enabling smooth and coherent transitions across successive synthesis steps.

We present a technical tutorial for building enterprise-grade realtime voice agents from first principles. While end-to-end speech-to-speech models may ultimately provide the best latency for voice agents, fully self-hosted end-to-end solutions are not yet available. We evaluate the closest candidate, Qwen3-Omni, across three configurations: its cloud-only DashScope Realtime API achieves sim702ms audio-to-audio latency with streaming, but is not self-hostable; its local vLLM deployment supports only the Thinker (text generation from audio, 516ms), not the Talker (audio synthesis); and its local Transformers deployment runs the full pipeline but at sim146s -- far too slow for realtime. The cascaded streaming pipeline (STT rightarrow LLM rightarrow TTS) therefore remains the practical architecture for self-hosted realtime voice agents, and the focus of this tutorial. We build a complete voice agent using Deepgram (streaming STT), vLLM-served LLMs with function calling (streaming text generation), and ElevenLabs (streaming TTS), achieving a measured time-to-first-audio of 755ms (best case 729ms) with full function calling support. We release the full codebase as a 9-chapter progressive tutorial with working, tested code for every component.

Audio in the real world may be perturbed due to numerous factors, causing the audio quality to be degraded. The following work presents an audio restoration model tailored for high-res music at 44.1kHz. Our model, Audio-to-Audio Schrodinger Bridges (A2SB), is capable of both bandwidth extension (predicting high-frequency components) and inpainting (re-generating missing segments). Critically, A2SB is end-to-end without need of a vocoder to predict waveform outputs, able to restore hour-long audio inputs, and trained on permissively licensed music data. A2SB is capable of achieving state-of-the-art bandwidth extension and inpainting quality on several out-of-distribution music test sets. Our demo website is https: //research.nvidia.com/labs/adlr/A2SB/.

Most existing datasets for sound event recognition (SER) are relatively small and/or domain-specific, with the exception of AudioSet, based on over 2M tracks from YouTube videos and encompassing over 500 sound classes. However, AudioSet is not an open dataset as its official release consists of pre-computed audio features. Downloading the original audio tracks can be problematic due to YouTube videos gradually disappearing and usage rights issues. To provide an alternative benchmark dataset and thus foster SER research, we introduce FSD50K, an open dataset containing over 51k audio clips totalling over 100h of audio manually labeled using 200 classes drawn from the AudioSet Ontology. The audio clips are licensed under Creative Commons licenses, making the dataset freely distributable (including waveforms). We provide a detailed description of the FSD50K creation process, tailored to the particularities of Freesound data, including challenges encountered and solutions adopted. We include a comprehensive dataset characterization along with discussion of limitations and key factors to allow its audio-informed usage. Finally, we conduct sound event classification experiments to provide baseline systems as well as insight on the main factors to consider when splitting Freesound audio data for SER. Our goal is to develop a dataset to be widely adopted by the community as a new open benchmark for SER research.

While recent work in controllable text-to-audio (TTA) generation has achieved fine-grained control through timestamp conditioning, its scope remains limited by audio quality and input format. These models often suffer from poor audio quality in real datasets due to sole reliance on synthetic data. Moreover, some models are constrained to a closed vocabulary of sound events, preventing them from controlling audio generation for open-ended, free-text queries. This paper introduces PicoAudio2, a framework that advances temporal-controllable TTA by mitigating these data and architectural limitations. Specifically, we use a grounding model to annotate event timestamps of real audio-text datasets to curate temporally-strong real data, in addition to simulation data from existing works. The model is trained on the combination of real and simulation data. Moreover, we propose an enhanced architecture that integrates the fine-grained information from a timestamp matrix with coarse-grained free-text input. Experiments show that PicoAudio2 exhibits superior performance in terms of temporal controllability and audio quality.

Recent progress in multimodal models has spurred rapid advances in audio understanding, generation, and editing. However, these capabilities are typically addressed by specialized models, leaving the development of a truly unified framework that can seamlessly integrate all three tasks underexplored. While some pioneering works have explored unifying audio understanding and generation, they often remain confined to specific domains. To address this, we introduce Audio-Omni, the first end-to-end framework to unify generation and editing across general sound, music, and speech domains, with integrated multi-modal understanding capabilities. Our architecture synergizes a frozen Multimodal Large Language Model for high-level reasoning with a trainable Diffusion Transformer for high-fidelity synthesis. To overcome the critical data scarcity in audio editing, we construct AudioEdit, a new large-scale dataset comprising over one million meticulously curated editing pairs. Extensive experiments demonstrate that Audio-Omni achieves state-of-the-art performance across a suite of benchmarks, outperforming prior unified approaches while achieving performance on par with or superior to specialized expert models. Beyond its core capabilities, Audio-Omni exhibits remarkable inherited capabilities, including knowledge-augmented reasoning generation, in-context generation, and zero-shot cross-lingual control for audio generation, highlighting a promising direction toward universal generative audio intelligence. The code, model, and dataset will be publicly released on https://zeyuet.github.io/Audio-Omni.

This paper introduces LLM2Fx-Tools, a multimodal tool-calling framework that generates executable sequences of audio effects (Fx-chain) for music post-production. LLM2Fx-Tools uses a large language model (LLM) to understand audio inputs, select audio effects types, determine their order, and estimate parameters, guided by chain-of-thought (CoT) planning. We also present LP-Fx, a new instruction-following dataset with structured CoT annotations and tool calls for audio effects modules. Experiments show that LLM2Fx-Tools can infer an Fx-chain and its parameters from pairs of unprocessed and processed audio, enabled by autoregressive sequence modeling, tool calling, and CoT reasoning. We further validate the system in a style transfer setting, where audio effects information is transferred from a reference source and applied to new content. Finally, LLM-as-a-judge evaluation demonstrates that our approach generates appropriate CoT reasoning and responses for music production queries. To our knowledge, this is the first work to apply LLM-based tool calling to audio effects modules, enabling interpretable and controllable music production.

Discrete audio tokenizers are fundamental to empowering large language models with native audio processing and generation capabilities. Despite recent progress, existing approaches often rely on pretrained encoders, semantic distillation, or heterogeneous CNN-based architectures. These designs introduce fixed inductive biases that limit reconstruction fidelity and hinder effective scaling. In this paper, we argue that discrete audio tokenization should be learned fully end-to-end using a homogeneous and scalable architecture. To this end, we first propose CAT (Causal Audio Tokenizer with Transformer), a purely Transformer-based architecture that jointly optimizes the encoder, quantizer, and decoder from scratch for high-fidelity reconstruction. Building on the CAT architecture, we develop MOSS-Audio-Tokenizer, a large-scale audio tokenizer featuring 1.6 billion parameters, pre-trained on 3 million hours of diverse, general audio data. We show that this simple, fully end-to-end approach built from homogeneous, causal Transformer blocks scales gracefully and supports high-fidelity reconstruction across diverse audio domains. Across speech, sound, and music, MOSS-Audio-Tokenizer consistently outperforms prior codecs over a wide range of bitrates, while exhibiting predictable improvements with increased scale. Notably, leveraging the discrete tokens from our model, we develop the first purely autoregressive TTS model that surpasses prior non-autoregressive and cascaded systems. Furthermore, MOSS-Audio-Tokenizer enables competitive ASR performance without auxiliary encoders. Our findings position the CAT architecture as a unified, scalable interface for the next generation of native audio foundation models.

Spatial audio authoring coordinates source decisions with soundfield synthesis. For editing, plans specify what to change and retain, while reference audio supplies further acoustic detail. We present AMBIT, a unified framework for native First-Order Ambisonics (FOA) generation and editing with three connected contributions. First, a shared Transfusion backbone couples autoregressive planning with rectified-flow rendering through executable ScenePlans that specify source content, activity, and 3D trajectories. For editing, the plan describes the full target scene, including retained sources; contrastive features ground the requested change, while full reference latents supply residual acoustic detail for preservation. Second, an FOA-aware continuous VAE combines shared-decoder omnidirectional recovery, asymmetric grouped KL, and spatial covariance matching to preserve content and inter-channel structure. Third, joint Transfusion on-policy self-distillation (OPSD) refines planning on student-generated prefixes and rendering at sampling states reached under student plans, with target-conditioned teachers supervising both modes of the shared student. Evaluations across speech, music, and sound show improved generation content and spatial quality, acoustic fidelity during instruction-guided editing, and unedited-source preservation over the compared baselines. Project page: https://wjm-george.github.io/AMBIT/

Editing signals using large pre-trained models, in a zero-shot manner, has recently seen rapid advancements in the image domain. However, this wave has yet to reach the audio domain. In this paper, we explore two zero-shot editing techniques for audio signals, which use DDPM inversion on pre-trained diffusion models. The first, adopted from the image domain, allows text-based editing. The second, is a novel approach for discovering semantically meaningful editing directions without supervision. When applied to music signals, this method exposes a range of musically interesting modifications, from controlling the participation of specific instruments to improvisations on the melody. Samples can be found on our examples page in https://hilamanor.github.io/AudioEditing/ and code can be found in https://github.com/hilamanor/AudioEditing/ .

Audio editing is applicable for various purposes, such as adding background sound effects, replacing a musical instrument, and repairing damaged audio. Recently, some diffusion-based methods achieved zero-shot audio editing by using a diffusion and denoising process conditioned on the text description of the output audio. However, these methods still have some problems: 1) they have not been trained on editing tasks and cannot ensure good editing effects; 2) they can erroneously modify audio segments that do not require editing; 3) they need a complete description of the output audio, which is not always available or necessary in practical scenarios. In this work, we propose AUDIT, an instruction-guided audio editing model based on latent diffusion models. Specifically, AUDIT has three main design features: 1) we construct triplet training data (instruction, input audio, output audio) for different audio editing tasks and train a diffusion model using instruction and input (to be edited) audio as conditions and generating output (edited) audio; 2) it can automatically learn to only modify segments that need to be edited by comparing the difference between the input and output audio; 3) it only needs edit instructions instead of full target audio descriptions as text input. AUDIT achieves state-of-the-art results in both objective and subjective metrics for several audio editing tasks (e.g., adding, dropping, replacement, inpainting, super-resolution). Demo samples are available at https://audit-demo.github.io/.

Audio and music generation based on flexible multimodal control signals is a widely applicable topic, with the following key challenges: 1) a unified multimodal modeling framework, 2) large-scale, high-quality training data, and 3) the prohibitive inference cost of multi-step diffusion sampling. As such, we propose AudioX-Turbo, a unified and efficient framework for anything-to-audio generation that integrates varied multimodal conditions (i.e., text, video, and audio signals) in this work. AudioX-Turbo follows a teacher-student paradigm. The teacher AudioX-Base is built on a Multimodal Diffusion Transformer with a Multimodal Adaptive Fusion module that aligns diverse multimodal inputs for high-fidelity synthesis, and is then distilled into the few-step student AudioX-Turbo via Distribution Matching Distillation adapted to flow matching, complemented by a diffusion-based discriminator for high-quality few-step generation. To support the training of AudioX-Turbo, we construct a large-scale, high-quality dataset, IF-caps-Pro, comprising approximately 9.2M samples curated through a two-stage data collection and annotation pipeline. We benchmark AudioX-Turbo across a wide range of tasks, finding that our model achieves superior performance, especially on text-to-audio and text-to-music generation, while operating at only 4 sampling steps and requiring approximately 25x fewer function evaluations (NFE) than multi-step baselines. These results demonstrate that our method is capable of audio generation under flexible multimodal control, showing efficient and powerful instruction-following capabilities. The code and datasets will be available at https://zeyuet.github.io/AudioX-Turbo/.

The sound effects that designers add to videos are designed to convey a particular artistic effect and, thus, may be quite different from a scene's true sound. Inspired by the challenges of creating a soundtrack for a video that differs from its true sound, but that nonetheless matches the actions occurring on screen, we propose the problem of conditional Foley. We present the following contributions to address this problem. First, we propose a pretext task for training our model to predict sound for an input video clip using a conditional audio-visual clip sampled from another time within the same source video. Second, we propose a model for generating a soundtrack for a silent input video, given a user-supplied example that specifies what the video should "sound like". We show through human studies and automated evaluation metrics that our model successfully generates sound from video, while varying its output according to the content of a supplied example. Project site: https://xypb.github.io/CondFoleyGen/

Stable Audio 3 is a family of fast latent diffusion models (small, medium, large) for variable-length audio generation and editing. Since our models can generate several minutes of audio, variable-length generations are key to avoid the cost of producing full-length generations for short sounds. We also support inpainting, enabling targeted audio editing and the continuation of short recordings. Our latent diffusion models operate on top of a novel semantic-acoustic autoencoder that projects audio into a compact latent space, enabling efficient diffusion-based generation while preserving audio fidelity and encouraging semantic structure in the latent. Finally, we run adversarial post-training to both accelerate inference and improve generation quality, reducing the number of inference steps while improving fidelity and prompt adherence. Stable Audio 3 models are trained on licensed and Creative Commons data to generate music and sounds in less than a 2s on an H200 GPU and less than a few seconds on a MacBook Pro M4. We release the weights of small and medium, that can run on consumer-grade hardware, together with their training and inference pipeline.

Audio generation, including speech, music and sound effects, has advanced rapidly in recent years. These tasks can be divided into two categories: time-aligned (TA) tasks, where each input unit corresponds to a specific segment of the output audio (e.g., phonemes aligned with frames in speech synthesis); and non-time-aligned (NTA) tasks, where such alignment is not available. Since modeling paradigms for the two types are typically different, research on different audio generation tasks has traditionally followed separate trajectories. However, audio is not inherently divided into such categories, making a unified model a natural and necessary goal for general audio generation. Previous unified audio generation works have adopted autoregressive architectures, while unified non-autoregressive approaches remain largely unexplored. In this work, we propose UniFlow-Audio, a universal audio generation framework based on flow matching. We propose a dual-fusion mechanism that temporally aligns audio latents with TA features and integrates NTA features via cross-attention in each model block. Task-balanced data sampling is employed to maintain strong performance across both TA and NTA tasks. UniFlow-Audio supports omni-modalities, including text, audio, and video. By leveraging the advantage of multi-task learning and the generative modeling capabilities of flow matching, UniFlow-Audio achieves strong results across 7 tasks using fewer than 8K hours of public training data and under 1B trainable parameters. Even the small variant with only ~200M trainable parameters shows competitive performance, highlighting UniFlow-Audio as a potential non-auto-regressive foundation model for audio generation. Code and models will be available at https://wsntxxn.github.io/uniflow_audio.

We introduce HiFi-HARP, a large-scale dataset of 7th-order Higher-Order Ambisonic Room Impulse Responses (HOA-RIRs) consisting of more than 100,000 RIRs generated via a hybrid acoustic simulation in realistic indoor scenes. HiFi-HARP combines geometrically complex, furnished room models from the 3D-FRONT repository with a hybrid simulation pipeline: low-frequency wave-based simulation (finite-difference time-domain) up to 900 Hz is used, while high frequencies above 900 Hz are simulated using a ray-tracing approach. The combined raw RIRs are encoded into the spherical-harmonic domain (AmbiX ACN) for direct auralization. Our dataset extends prior work by providing 7th-order Ambisonic RIRs that combine wave-theoretic accuracy with realistic room content. We detail the generation pipeline (scene and material selection, array design, hybrid simulation, ambisonic encoding) and provide dataset statistics (room volumes, RT60 distributions, absorption properties). A comparison table highlights the novelty of HiFi-HARP relative to existing RIR collections. Finally, we outline potential benchmarks such as FOA-to-HOA upsampling, source localization, and dereverberation. We discuss machine learning use cases (spatial audio rendering, acoustic parameter estimation) and limitations (e.g., simulation approximations, static scenes). Overall, HiFi-HARP offers a rich resource for developing spatial audio and acoustics algorithms in complex environments.

Recently, diffusion models have achieved great success in mono-channel audio generation. However, when it comes to stereo audio generation, the soundscapes often have a complex scene of multiple objects and directions. Controlling stereo audio with spatial contexts remains challenging due to high data costs and unstable generative models. To the best of our knowledge, this work represents the first attempt to address these issues. We first construct a large-scale, simulation-based, and GPT-assisted dataset, BEWO-1M, with abundant soundscapes and descriptions even including moving and multiple sources. Beyond text modality, we have also acquired a set of images and rationally paired stereo audios through retrieval to advance multimodal generation. Existing audio generation models tend to generate rather random and indistinct spatial audio. To provide accurate guidance for Latent Diffusion Models, we introduce the SpatialSonic model utilizing spatial-aware encoders and azimuth state matrices to reveal reasonable spatial guidance. By leveraging spatial guidance, our model not only achieves the objective of generating immersive and controllable spatial audio from text but also extends to other modalities as the pioneer attempt. Finally, under fair settings, we conduct subjective and objective evaluations on simulated and real-world data to compare our approach with prevailing methods. The results demonstrate the effectiveness of our method, highlighting its capability to generate spatial audio that adheres to physical rules.

Music generation models can produce high-fidelity coherent accompaniment given complete audio input, but are limited to editing and loop-based workflows. We study real-time audio-to-audio accompaniment: as a model hears an input audio stream (e.g., a singer singing), it has to also simultaneously generate in real-time a coherent accompanying stream (e.g., a guitar accompaniment). In this work, we propose a model design considering inevitable system delays in practical deployment with two design variables: future visibility t_f, the offset between the output playback time and the latest input time used for conditioning, and output chunk duration k, the number of frames emitted per call. We train Transformer decoders across a grid of (t_f,k) and show two consistent trade-offs: increasing effective t_f improves coherence by reducing the recency gap, but requires faster inference to stay within the latency budget; increasing k improves throughput but results in degraded accompaniment due to a reduced update rate. Finally, we observe that naive maximum-likelihood streaming training is insufficient for coherent accompaniment where future context is not available, motivating advanced anticipatory and agentic objectives for live jamming.

Generating audio that is acoustically consistent with a scene is essential for immersive virtual environments. Recent neural acoustic field methods enable spatially continuous sound rendering but remain scene-specific, requiring dense audio measurements and costly training for each environment. Few-shot approaches improve scalability across rooms but still rely on multiple recordings and, being deterministic, fail to capture the inherent uncertainty of scene acoustics under sparse context. We introduce flow-matching acoustic generation (FLAC), a probabilistic method for few-shot acoustic synthesis that models the distribution of plausible room impulse responses (RIRs) given minimal scene context. FLAC leverages a diffusion transformer trained with a flow-matching objective to generate RIRs at arbitrary positions in novel scenes, conditioned on spatial, geometric, and acoustic cues. FLAC outperforms state-of-the-art eight-shot baselines with one-shot on both the AcousticRooms and Hearing Anything Anywhere datasets. To complement standard perceptual metrics, we further introduce AGREE, a joint acoustic-geometry embedding, enabling geometry-consistent evaluation of generated RIRs through retrieval and distributional metrics. This work is the first to apply generative flow matching to explicit RIR synthesis, establishing a new direction for robust and data-efficient acoustic synthesis.

Models for audio source separation usually operate on the magnitude spectrum, which ignores phase information and makes separation performance dependant on hyper-parameters for the spectral front-end. Therefore, we investigate end-to-end source separation in the time-domain, which allows modelling phase information and avoids fixed spectral transformations. Due to high sampling rates for audio, employing a long temporal input context on the sample level is difficult, but required for high quality separation results because of long-range temporal correlations. In this context, we propose the Wave-U-Net, an adaptation of the U-Net to the one-dimensional time domain, which repeatedly resamples feature maps to compute and combine features at different time scales. We introduce further architectural improvements, including an output layer that enforces source additivity, an upsampling technique and a context-aware prediction framework to reduce output artifacts. Experiments for singing voice separation indicate that our architecture yields a performance comparable to a state-of-the-art spectrogram-based U-Net architecture, given the same data. Finally, we reveal a problem with outliers in the currently used SDR evaluation metrics and suggest reporting rank-based statistics to alleviate this problem.

Audio and speech coding lack unified evaluation and open-source testing. Many candidate systems were evaluated on proprietary, non-reproducible, or small data, and machine learning-based codecs are often tested on datasets with similar distributions as trained on, which is unfairly compared to digital signal processing-based codecs that usually work well with unseen data. This paper presents a full-band audio and speech coding quality benchmark with more variable content types, including traditional open test vectors. An example use case of audio coding quality assessment is presented with open-source Opus, 3GPP's EVS, and recent ETSI's LC3 with LC3+ used in Bluetooth LE Audio profiles. Besides, quality variations of emotional speech encoding at 16 kbps are shown. The proposed open-source benchmark contributes to audio and speech coding democratization and is available at https://github.com/JozefColdenhoff/OpenACE.

Native real-time audio engines meet audio deadlines but are hard to connect to machine-learning workflows, while tensor frameworks integrate with machine learning but process audio as offline batches without timing guarantees; runtime layers built on them inherit the host's scheduling and deployment footprint. This paper presents Fluxion, a Rust audio DSP runtime for cascaded second-order sections, FIR filters, and delay-line effects. Fluxion implements the parts that are specific to DSP: closed-form filter design, forward kernels, analytic adjoints for the recursion, and stability checks. It relies on existing libraries for the autodiff graph, GPU code generation (tested here on CUDA), and array interchange. One graph algebra is lowered to a differentiable training engine and to an allocation-free real-time engine; between them, a trained graph is checked for stability and frozen into a versioned artifact that an edge device checks again before playback. We compare Fluxion with six framework-hosted and native baselines under one float32 protocol. Among the systems that compute the exact recursion, Fluxion has the highest GPU throughput when data stays on the device and the highest throughput on most CPU workloads, while its CPU training step is slower than those of torchaudio and GRAFX. Its test suite checks the audio thread for allocations with an instrumented allocator, and we report measured latency tails. Fluxion is open source at https://github.com/matteospanio/fluxion.

Generative modeling has recently achieved remarkable success across image, video, and audio domains, demonstrating powerful capabilities for unified representation learning. Yet speech front-end tasks such as speech enhancement (SE), target speaker extraction (TSE), acoustic echo cancellation (AEC), and language-queried source separation (LASS) remain largely tackled by disparate, task-specific solutions. This fragmentation leads to redundant engineering effort, inconsistent performance, and limited extensibility. To address this gap, we introduce UniFlow, a unified framework that employs continuous generative modeling to tackle diverse speech front-end tasks in a shared latent space. Specifically, UniFlow utilizes a waveform variational autoencoder (VAE) to learn a compact latent representation of raw audio, coupled with a Diffusion Transformer (DiT) that predicts latent updates. To differentiate the speech processing task during the training, learnable condition embeddings indexed by a task ID are employed to enable maximal parameter sharing while preserving task-specific adaptability. To balance model performance and computational efficiency, we investigate and compare three generative objectives: denoising diffusion, flow matching, and mean flow within the latent domain. We validate UniFlow on multiple public benchmarks, demonstrating consistent gains over state-of-the-art baselines. UniFlow's unified latent formulation and conditional design make it readily extensible to new tasks, providing an integrated foundation for building and scaling generative speech processing pipelines. To foster future research, we will open-source our codebase.

Headphone-based spatial audio uses head-related transfer functions (HRTFs) to simulate real-world acoustic environments. HRTFs are unique to everyone, due to personal morphology, shaping how sound waves interact with the body before reaching the eardrums. Here we present the extended SONICOM HRTF dataset which expands on the previous version released in 2023. The total number of measured subjects has now been increased to 300, with demographic information for a subset of the participants, providing context for the dataset's population and relevance. The dataset incorporates synthesised HRTFs for 200 of the 300 subjects, generated using Mesh2HRTF, alongside pre-processed 3D scans of the head and ears, optimised for HRTF synthesis. This rich dataset facilitates rapid and iterative optimisation of HRTF synthesis algorithms, allowing the automatic generation of large data. The optimised scans enable seamless morphological modifications, providing insights into how anatomical changes impact HRTFs, and the larger sample size enhances the effectiveness of machine learning approaches. To support analysis, we also introduce the Spatial Audio Metrics (SAM) Toolbox, a Python package designed for efficient analysis and visualisation of HRTF data, offering customisable tools for advanced research. Together, the extended dataset and toolbox offer a comprehensive resource for advancing personalised spatial audio research and development.

We introduce InspireMusic, a framework integrated super resolution and large language model for high-fidelity long-form music generation. A unified framework generates high-fidelity music, songs, and audio, which incorporates an autoregressive transformer with a super-resolution flow-matching model. This framework enables the controllable generation of high-fidelity long-form music at a higher sampling rate from both text and audio prompts. Our model differs from previous approaches, as we utilize an audio tokenizer with one codebook that contains richer semantic information, thereby reducing training costs and enhancing efficiency. This combination enables us to achieve high-quality audio generation with long-form coherence of up to 8 minutes. Then, an autoregressive transformer model based on Qwen 2.5 predicts audio tokens. Next, we employ a super-resolution flow-matching model to generate high-sampling rate audio with fine-grained details learned from an acoustic codec model. Comprehensive experiments show that the InspireMusic-1.5B-Long model has a comparable performance to recent top-tier open-source systems, including MusicGen and Stable Audio 2.0, on subjective and objective evaluations. The code and pre-trained models are released at https://github.com/FunAudioLLM/InspireMusic.

Digital advances have transformed the face of automatic music generation since its beginnings at the dawn of computing. Despite the many breakthroughs, issues such as the musical tasks targeted by different machines and the degree to which they succeed remain open questions. We present a functional taxonomy for music generation systems with reference to existing systems. The taxonomy organizes systems according to the purposes for which they were designed. It also reveals the inter-relatedness amongst the systems. This design-centered approach contrasts with predominant methods-based surveys and facilitates the identification of grand challenges to set the stage for new breakthroughs.

Text-guided audio editing aims to modify specific acoustic events while strictly preserving non-target content. Despite recent progress, existing approaches remain fundamentally limited. Training-free methods often suffer from signal degradation caused by diffusion inversion, while training-based methods, although achieving higher generation quality, are severely constrained by the scarcity of high-quality paired data and task formulations that cover only a narrow subset of editing operations. In addition, standard architectures typically decouple text and audio processing, limiting the ability to align instructions with specific acoustic contexts. To address these challenges, we propose MMEdit, an audio-language-model-driven framework for unified audio editing. We systematically extend task definitions to cover a comprehensive range of editing operations, including addition, replacement, removal, reordering, and attribute modification. Furthermore, we design a scalable data synthesis pipeline to construct large-scale paired datasets with fine-grained event-level annotations. To capture complex editing semantics, we integrate a Qwen2-Audio encoder with an MMDiT-based generator, enabling precise cross-modal alignment and localized editing. Experimental results demonstrate that our method achieves superior editing localization accuracy, robust instruction following, and high fidelity in non-edited regions.

In recent years, video generation has become a prominent generative tool and has drawn significant attention. However, there is little consideration in audio-to-video generation, though audio contains unique qualities like temporal semantics and magnitude. Hence, we propose The Power of Sound (TPoS) model to incorporate audio input that includes both changeable temporal semantics and magnitude. To generate video frames, TPoS utilizes a latent stable diffusion model with textual semantic information, which is then guided by the sequential audio embedding from our pretrained Audio Encoder. As a result, this method produces audio reactive video contents. We demonstrate the effectiveness of TPoS across various tasks and compare its results with current state-of-the-art techniques in the field of audio-to-video generation. More examples are available at https://ku-vai.github.io/TPoS/

We present Qwen-Audio-Agent, a harness that combines full-duplex voice interaction with asynchronous task execution through a foreground-background architecture. A Frontend Agent manages dialogue and selects between direct tool use and delegation, while a Backend Agent carries out delegated tasks in a separate context. An Orchestration Runtime maintains task state, coordinates requests for user input and authorization, and schedules the return of results to the conversation. The runtime separates speech interruption from task cancellation and execution completion from result delivery, allowing conversation to continue while delegated work proceeds. Environmental events and persistent memory provide context within and across sessions. Independent adapters support integration with different frontend models, backend agents, and clients. We instantiate the architecture in desktop assistance, intelligent cockpits, and voice customer service. On an in-house cockpit benchmark of 134 cases, mixed execution achieves a task success rate of 91.04%, compared with 72.39% and 80.60% for the direct and all delegated configurations, respectively. In a separate latency evaluation on matched successful turns, mixed execution reduces mean task execution latency by 26.73% and 30.91% relative to these baselines, respectively. These results support the complementary use of direct tool calls for immediate operations and backend delegation for multi-step tasks.

With the growth of the Internet of Things and the rise of Big Data, data processing and machine learning applications are being moved to cheap and low size, weight, and power (SWaP) devices at the edge, often in the form of mobile phones, embedded systems, or microcontrollers. The field of Cyber-Physical Measurements and Signature Intelligence (MASINT) makes use of these devices to analyze and exploit data in ways not otherwise possible, which results in increased data quality, increased security, and decreased bandwidth. However, methods to train and deploy models at the edge are limited, and models with sufficient accuracy are often too large for the edge device. Therefore, there is a clear need for techniques to create efficient AI/ML at the edge. This work presents training techniques for audio models in the field of environmental sound classification at the edge. Specifically, we design and train Transformers to classify office sounds in audio clips. Results show that a BERT-based Transformer, trained on Mel spectrograms, can outperform a CNN using 99.85% fewer parameters. To achieve this result, we first tested several audio feature extraction techniques designed for Transformers, using ESC-50 for evaluation, along with various augmentations. Our final model outperforms the state-of-the-art MFCC-based CNN on the office sounds dataset, using just over 6,000 parameters -- small enough to run on a microcontroller.

In daily life, people hear speech, footsteps, and music around them. We can often recognize these sounds and judge where they come from. Each sound source can be shown on a separate acoustic map, a rectangular image covering 360^{circ} horizontally and 180^{circ} vertically. The map shows the directions occupied by the source as a region and the sound energy within that region. A class label identifies the sound. Predicting these labeled acoustic maps from audio is called semantic acoustic imaging. Such maps could help robots perceive their surroundings and allow augmented reality displays to show sound regions and classes over the real world. Existing models can recognize sound classes and estimate a direction for each source. However, a direction alone does not describe the source region or its energy. Acoustic imaging must also distinguish sound sources in nearby directions, while the number of active sources and the regions they occupy can change over time. We therefore propose the Semantic Acoustic Imaging Detector (SAID), which predicts a separate labeled acoustic map for each active source from audio. First, we pretrain Audio2Sph, SAID's audio encoder, through sound energy estimation across directions without class labels. Then, we train the complete SAID model to predict source regions, energy, and classes together. We also develop a pipeline that generates simulated recordings for pretraining and supports fine-tuning on real recordings. On the official DCASE2026 Task 3 Track A evaluation set, our submitted system ranks first with 0.1080 macro-averaged mean average precision (Macro mAP) and 0.3962 Macro Pearson r. Demos and code are provided at https://github.com/IN03X/SAID.

Segment Anything Model 2 (SAM2) exhibits strong generalisation for promptable segmentation in video clips; however, its integration with the audio modality remains underexplored. Existing approaches either convert audio into visual prompts (e.g., boxes) via foundation models, or inject adapters into the image encoder for audio-visual fusion. Yet both directions fall short in human-in-the-loop scenarios due to limited prompt accuracy and increased inference overhead. In particular, these adapter-based methods often suffer from audio prompt dilution, where the signal gradually weakens as it propagates through the network. In this work, we propose AuralSAM2, which integrates audio into SAM2 while largely preserving its promptable segmentation capability. Its core module, AuralFuser, fuses audio and visual features to generate sparse and dense prompts. Guided by audio and built upon SAM2's feature pyramid, these prompts propagate auditory cues across visual layers, reinforcing cross-modal influence. To further align modalities, we introduce an audio-guided contrastive loss that emphasises auditory relevance in dominant visual features. Our method achieves notable accuracy gains on public benchmarks with only minimal impact on the interactive efficiency of promptable segmentation. Our code is available at https://github.com/yyliu01/AuralSAM2.

We introduce proactive hearing assistants that automatically identify and separate the wearer's conversation partners, without requiring explicit prompts. Our system operates on egocentric binaural audio and uses the wearer's self-speech as an anchor, leveraging turn-taking behavior and dialogue dynamics to infer conversational partners and suppress others. To enable real-time, on-device operation, we propose a dual-model architecture: a lightweight streaming model runs every 12.5 ms for low-latency extraction of the conversation partners, while a slower model runs less frequently to capture longer-range conversational dynamics. Results on real-world 2- and 3-speaker conversation test sets, collected with binaural egocentric hardware from 11 participants totaling 6.8 hours, show generalization in identifying and isolating conversational partners in multi-conversation settings. Our work marks a step toward hearing assistants that adapt proactively to conversational dynamics and engagement. More information can be found on our website: https://proactivehearing.cs.washington.edu/

Text-to-audio generation synthesizes realistic sounds or music given a natural language prompt. Diffusion-based frameworks, including the Tango and the AudioLDM series, represent the state-of-the-art in text-to-audio generation. Despite achieving high audio fidelity, they incur significant inference latency due to the slow diffusion sampling process. MAGNET, a mask-based model operating on discrete tokens, addresses slow inference through iterative mask-based parallel decoding. However, its audio quality still lags behind that of diffusion-based models. In this work, we introduce IMPACT, a text-to-audio generation framework that achieves high performance in audio quality and fidelity while ensuring fast inference. IMPACT utilizes iterative mask-based parallel decoding in a continuous latent space powered by diffusion modeling. This approach eliminates the fidelity constraints of discrete tokens while maintaining competitive inference speed. Results on AudioCaps demonstrate that IMPACT achieves state-of-the-art performance on key metrics including Fr\'echet Distance (FD) and Fr\'echet Audio Distance (FAD) while significantly reducing latency compared to prior models. The project website is available at https://audio-impact.github.io/.

Music audio generation spans instrumental clips, full songs with vocals, edits of existing recordings, and systems that play alongside a musician in real time. This monograph explains the methods behind these systems for readers familiar with neural-network training who are new to music generation. It introduces neural audio codecs and autoencoders, autoregressive and masked token models, diffusion and flow matching, sampling acceleration, and preference optimization in a shared notation. Worked examples connect training objectives and sampling procedures to published systems. The application sections relate the musical requirements of instrumental generation, songs, editing, and live performance to model design. Comparison tables record representations, methods, inputs, tasks, and release information documented in papers and official sources. Symbolic composition, speech, and sound effects are included where they connect to music audio. We explain how to interpret automatic metrics and learned judges, design and report listening tests, and assess evidence about data provenance, memorization, attribution, and output detection. Selected legal decisions and disputes illustrate the implications for training and release. The reviewed systems combine established generative paradigms with new representations, planning stages, and post-training procedures. Differences in data, scale, and evaluation limit what cross-system comparisons can establish about the sources of reported gains.

In recent years, audio generation has made significant progress in tasks such as text-to-speech (TTS), text-to-audio (TTA) and text-to-music (TTM). However, generating long-form and controllable audio from complex audio scene descriptions remains a significant challenge, as such scenes often require coordinated speech, sound effects, music, songs, temporal structure, and post-production. In this work, we introduce Audio-Oscar, a multi-agent framework for generating audio from complex descriptions. Audio-Oscar coordinates a set of specialist agents, each responsible for a different aspect of the audio scene, including character modeling and voice design, speech generation, fine-grained timeline planning, model selection, non-speech generation, and audio post-production. Audio-Oscar further incorporates feedback-driven refinement. In addition, to address the lack of suitable benchmarks for evaluating audio generation from complex audio scene descriptions, we construct ASG-Bench, an Audio Scene Generation Benchmark containing both scene descriptions paired with reference audio and text-only scene descriptions. Each scene is annotated with target audio events and temporal statements to evaluate whether the generated audio faithfully realizes the required scene content and temporal structure. Experimental results show that Audio-Oscar can effectively generate audio that matches complex scene descriptions. Project samples are available at https://audiooscar.github.io/. Our code is available at https://github.com/ziye26/Audio-Oscar.