Daily Papers

Many robot manipulation videos do not indicate whether the task was successfully completed. RoboJev-27B is an open-weight vision-language model that takes a task instruction, 10 frames of a manipulation attempt, and (if available) final frames from auxiliary cameras and predicts whether the robot accomplished the task. RoboJev-27B is a variant of JEV-27B-VL, trained with a rank-32 LoRA adapter on the language model only (keeping the vision encoder frozen) using 52,598 episode records. It also uses a source-specific KL penalty that applies only to research data, anchoring predictions closer to the original model on those sources. It uses a calibrated two-token readout that outputs success/failure probabilities in a single forward pass. On 268 held-out episodes of the same robot model (SO-101), RoboJev-27B attains 95.2% balanced accuracy and 0.993 AUROC. It also generalises to episodes collected by unseen labs/robots (AUROC = 0.890 over 459 episodes) as well as to clearly labelled community-collected episodes (accuracy = 93.3% over 135 episodes), where the base model attains an AUROC = 0.900 on the unseen-lab/robot subset with the same inputs. It takes 0.26 seconds per episode (median, serial) to infer on a single H100, which is about \0.19 per 1,000 success predictions at 2.69 per GPU-hour (not including media processing and serving costs). RoboJev-27B is released together with its inference code, along with a transparent evaluation: 20,628 predictions organized into 29 model/protocol entries are made available to facilitate browsing and to enable reproducible benchmarking of success detection. We also compare against strong API-based frontier VLMs, which take in fewer input frames (4 images from the primary camera only); note that this comparison is not strictly like-for-like because RoboJev-27B is given more frames at inference.

Single-prompt accuracy is the dominant way to benchmark language models, but it can miss reliability failures that matter. We evaluate a 15-model open-weight corpus, with the main reliability analyses focused on 10 instruct models across five classification and reasoning benchmarks under five prompt variants each, measuring accuracy, token-probability calibration, verbal-confidence calibration, verbal parse rate, and prompt-perturbation spread for every (model x dataset x variant) cell. We find three broad results. First, evaluation design can materially change the conclusion. Switching Expected Calibration Error (ECE) token from a raw to a label-set-normalised definition changes per-cell calibration by a mean absolute 0.149. More strikingly, pairing a chain-of-thought prompt with a first-character evaluator on ARC-Challenge reduces apparent accuracy by 72-88% across all five primary models; two independent repair procedures recover 93.8% and 102.7% of the lost performance, indicating an evaluator-side rather than model-side failure. Second, confidence signals are fragile. On MMLU-Pro, every primary model verbally reports confidence substantially above both its accuracy and its token-probability confidence on the same rows, and verbal parse rate can collapse for a single model on a single prompt variant. Third, prompt robustness does not track parameter count reliably. Across 10 instruct models, the correlation between model size and prompt-perturbation spread ranges from -0.244 to 0.474 across benchmarks. Taken together, these results show that reliability conclusions for small language models depend not only on the model being evaluated, but also on the evaluation pipeline used to measure it. We argue that calibration definitions, evaluator logic, verbal parseability, and prompt robustness should be reported explicitly when making reliability claims.

Mixture-of-Experts (MoE) models are bottlenecked by loading routed-expert weights from memory during interactive decoding at small batch sizes. Because most intermediate channels in a routed expert contribute little to any single token, channel selectors predict which channels matter and read only their weights, typically keeping channels above a threshold calibrated on offline data. We show that channel selection needs no calibration data. First, a calibrated threshold does not fix how much a selector reads, because the number of channels passing it varies across inputs; Prox with thresholds calibrated for an 18% read budget actually reads only 12.9% on average across our benchmarks. Second, top-k keeps each token's k highest-scoring channels and needs no calibration data. At the calibrated budget, a selector's top-k version matches or beats its threshold version on the same score in 40 of 43 comparisons at 13% and 18% budgets, including all 23 on generation tasks. The top-k versions also avoid the repetition-loop collapse that calibrated thresholds cause on Gemma 4. Calibrating a threshold thus provides neither of the two things selectors use it for: a known read budget and a consistent accuracy gain at that budget. We furthermore introduce a reader built entirely from the model's weights, which screens channels with a ternary sketch and recovers the skipped ones with a low-rank map. Across three post-trained MoE models, our reader retains 98.1% of full-model accuracy at 17.8% of routed-expert reads, with Triton kernels running MoE blocks 1.60 to 1.90x faster than optimized vLLM at batch one and up to 2.69x at larger batches on the same three models.

Quantifying the uncertainty of predictions made by large language models (LLMs) in binary text classification tasks remains a challenge. Calibration, in the context of LLMs, refers to the alignment between the model's predicted probabilities and the actual correctness of its predictions. A well-calibrated model should produce probabilities that accurately reflect the likelihood of its predictions being correct. We propose a novel approach that utilizes the inductive Venn--Abers predictor (IVAP) to calibrate the probabilities associated with the output tokens corresponding to the binary labels. Our experiments on the BoolQ dataset using the Llama 2 model demonstrate that IVAP consistently outperforms the commonly used temperature scaling method for various label token choices, achieving well-calibrated probabilities while maintaining high predictive quality. Our findings contribute to the understanding of calibration techniques for LLMs and provide a practical solution for obtaining reliable uncertainty estimates in binary question answering tasks, enhancing the interpretability and trustworthiness of LLM predictions.

We set out to reproduce a recent hallucination-mitigation result on the POPE benchmark. The LLaVA-1.5-7B baseline we measured, 82.21 F1 on the adversarial split, sat 1.21 to 8.67 points above the adversarial baselines we planned to compare against (81.00, 79.30, and 73.54). We looked at the evaluation code and found a readout choice that moves F1 on its own. A two-token logit readout decides yes versus no by comparing two vocabulary IDs, 3582 ("yes") and 1217 ("no"). Across 9,000 greedy-decode questions spanning all three splits, neither ID is generated even once. The model emits " Yes" (token 3869) and " No" (token 1939), because SentencePiece prepends a space byte after the prompt suffix "ASSISTANT:". Read with an eight-token lookup that covers the space-prefixed surface forms, LLaVA-1.5-7B scores F1 0.8221, 0.8498, and 0.8713 on the adversarial, popular, and random splits. That 6.13-point adversarial shift exceeds the adversarial gain reported by five of the six papers we surveyed. None of them states its readout, and our reference ran under 4-bit NF4 quantization, so we cannot say how much of any reported gain a matched evaluation would keep. That comparison stays unresolved until readout and precision are matched. On the fixed baseline we run nine inference-time corrections of our own (none beat it) and dissect why the adversarial split resists logit-level intervention. In a 3,000-question probe, wrong predictions draw more image attention than correct ones (Cohen's d=-0.46, p=1.4times10^{-24}), the opposite of what grounding-based corrections assume. A four-readout audit across four further VLMs from three tokenizer families confirms the confound is protocol-level, not model-specific: porting the LLaVA-1.5 IDs verbatim drops F1 to 0.00 on the two disjoint-vocabulary models, whereas a tokenizer-derived readout holds between 0.80 and 0.92.

Post-training quantization (PTQ) is a primary approach for deploying large language models without fine-tuning, and the quantized performance is often strongly affected by the calibration in PTQ. By contrast, in vision-language models (VLMs), substantial differences between visual and text tokens in their activation distributions and sensitivities to quantization error pose significant challenges for effective calibration during PTQ. In this work, we rethink what PTQ calibration should align with in VLMs and propose the Token-level Importance-aware Layer-wise Quantization framework (TLQ). Guided by gradient information, we design a token-level importance integration mechanism for quantization error, and use it to construct a token-level calibration set, enabling a more fine-grained calibration strategy. Furthermore, TLQ introduces a multi-GPU, quantization-exposed layer-wise calibration scheme. This scheme keeps the layer-wise calibration procedure consistent with the true quantized inference path and distributes the complex layer-wise calibration workload across multiple RTX3090 GPUs, thereby reducing reliance on the large memory of A100 GPUs. TLQ is evaluated across two models, three model scales, and two quantization settings, consistently achieving performance improvements across all settings, indicating its strong quantization stability. The code will be released publicly.

Large language models run every token through every layer, regardless of difficulty. We present TIDE, a post-training system that attaches tiny learned routers at periodic checkpoint layers and, at inference time, selects the earliest layer whose hidden state has converged for each token. TIDE requires no model retraining, works with any HuggingFace causal LM, auto-detects GPU architecture, and supports float32, float16, and bfloat16 through fused CUDA kernels. On an NVIDIA A100 with DeepSeek R1 Distill 8B, TIDE achieves 100% prefill exit rate (5% of tokens exit at layer 11, the remaining at layer 31), reduces prefill latency by 7.2%, and increases single-batch throughput by 6.6%. During autoregressive decoding, 98-99% of tokens exit early while the model correctly solves a multi-step math problem with 95 unique output tokens. On Qwen3 8B (36 layers), throughput improves by 8.1% at batch size 8. Calibration on 2,000 WikiText samples takes under 3 minutes and produces a ~4 MB router checkpoint. The system comprises 1,308 lines of Python and 1,081 lines of CUDA/C++ with 74 passing tests. Code: https://github.com/RightNow-AI/TIDE

As AI-based code generation becomes widespread, researchers are investigating the calibration of code LLMs - ensuring their confidence scores faithfully represent the true likelihood of code correctness. To do so, we investigate multicalibration, which can capture additional factors about a coding problem, such as complexity, code length, or programming language used. We study four multicalibration approaches on three function synthesis benchmarks, using latest-generation code LLMs (Qwen3 Coder, GPT-OSS, DeepSeek-R1-Distill). Our results demonstrate that multicalibration can yield distinct improvements over both uncalibrated token likelihoods (+1.03 in skill score) and baseline calibrations (+0.37 in skill score). We study the influence of the aforementioned factors in ablations, and make our dataset (consisting of code generations, likelihoods, and correctness labels) available for future research on code LLM calibration.

Learned post-training quantization (PTQ) calibration fits quantizer parameters on a small calibration set, and for a text embedder the natural supervision is retrieval relevance. We ask two questions that are usually conflated: how far to calibrate, and whether to calibrate at all. Across three embedders (e5-base-v2, BGE-M3, EmbeddingGemma-300m) at 4-bit weight quantization, 161 calibration runs, the outcome of a fixed procedure ranges from a gain to catastrophic degradation, and the driver is the dose of the update, measured as the functional displacement D_func of the quantized model from its uncalibrated start. On EmbeddingGemma the same learning-rate grid gives +1.47 to -71.53 points of in-domain NDCG@10 change; a label-free cosine objective collapses at the same dose (-69.52 vs -71.63), so the collapse is a property of learnable calibration rather than of retrieval supervision. Objective sensitivity is heterogeneous: on e5, ranking calibration is substantially more robust than cosine at matched displacement (+14.16 +/- 4.34 pp, 95% t-CI [+3.37, +24.96], three paired slates), whereas on BGE-M3 the ordering is directionally opposite but unresolved ([-5.18, +2.38]). Dose is the main axis but not a sufficient statistic: equal D_func reached along different paths differs by up to 1.61 pp. We therefore treat calibration as an optional intervention. A pre-registered rule that accepts a checkpoint only when a per-query paired confidence interval on a 25% calibration-validation split clears the uncalibrated baseline was run on 6 independent slates and five arms. It never selected a checkpoint below its slate's baseline (0 harmful selections in 30 decisions), retained 8 of 11 beneficial updates, and paid a mean oracle regret of 1.52 pp with one abstention that forfeited 11.13 pp, a safety-opportunity trade-off, not a free improvement. We report what remains open, including label efficiency.

Incremental-text streaming text-to-speech (TTS) needs online text progress tracking for synchronized highlighting, interruption handling, and dialogue-history updates. Input text arrives before it is spoken, so text arrival alone cannot indicate speech progress. Existing waveform-based alignment requires complete audio or adds acoustic processing during streaming. We propose X2-NativeCursor, a lightweight observer that tracks progress from native speech tokens before waveform decoding without changing the TTS generator. Its normalization plan links spoken labels to their original-text spans. Text and native-token encoders feed a local matcher that estimates the current label position. A separate output rule converts revisable position estimates into a cursor that never moves backward. Mean absolute error against an automatic reference is 0.151 Chinese characters with 80-ms lookahead, versus 1.253 characters with 320-ms lookahead for an online waveform baseline. Alignment real-time factor also decreases from 0.3598 to 0.0180 relative to this baseline. Lower tracking error is retained under a second automatic alignment reference. We evaluate X2-NativeCursor on Qwen3-TTS and validate its adaptation to CosyVoice2 by training a separate observer for each backbone. Code is publicly available at https://github.com/X-Square-Robot/X2Streaming-TTS.

Keyword-matching benchmarks can credit small models for tool use they never perform. We document such a false positive in a matched-architecture pair of Spanish security language models and propose a ladder of strict, cheap diagnostics. A 661.6M parameter model (approx. 65% code/technical text; no dedicated SFT) and a 1,109M model (web-heavy multi-phase curriculum; 6B-token tool-SFT) share decoder, tokenizer, and special tokens, scoring almost identically on lenient tool-use metrics (B4: 0.660 vs. 0.650). Verbatim-reproduction checks on training examples separate them completely: the 600M emits valid tool calls with generalized arguments on 6/6 examples; the 1B does so on 0/6 across checkpoints. A first-token probe localizes the 1B's failure to a missing prior (prob. 10^{-4}--10^{-5} on <|tool_call|>), which was erased by its web-heavy training phase. A targeted SFT recipe (diverse corpus, 5x higher learning rate, 2,202 steps, ~3.3 GPU-hours) repairs the 1B using three orders of magnitude fewer tokens than the failed phase. On all 269 corpus rows, valid emission rises from 0.100 to 0.959 (600M: 0.926). On 238 unseen prompts, the repaired 1B passes 0.536 vs. the 600M's 0.428 (p = 0.004). Embedding-drift checks show the repair did not move the trigger token's tied embedding (97.7% of the bf16 table remains bit-identical), meaning changes live in the surrounding network. Both models over-trigger, rarely answering negative prompts without a call (0.09 for 600M, 0.17 for repaired 1B). Factorial analyses confirm all repair configurations install the format, though suppression benefits from a diverse corpus remain a hypothesis due to seed sensitivity. This cheap diagnostic ladder costs minutes of CPU time and should gate tool-use claims on small models.

A language model's prediction of its next token develops across layers, and lens methods track this process by decoding intermediate hidden states into tokens. But a lens reading reflects both the hidden state and the readout (the unembedding matrix) used to decode it. Many lenses are fit on a corpus, and we show that two lenses differing only in their fitting corpus can report different tokens for the same hidden states. We call this dependence corpus conditionality. To examine readout structure independently of the fitting corpus, we introduce Sparse Readout Prism (SRP), which decomposes the readout using only its weights and expresses any token logit or logit difference as a sum of contributions from sparse readout features. This reveals readout features as a new unit of analysis for lens readings, exposing structure that token identities can obscure and enabling comparisons across tokens, contexts, layers, and lenses. Replacing the original readout with SRP's sparse approximation reconstructs 8.9-17.3 percentage points more of the tested logit differences than the strongest of six baselines built on geometric relations among readout rows. Ablating features shifts logit differences in proportion to their SRP contributions. Although token readings vary with the fitting corpus, the dominant readout feature remains stable. Because SRP uses no corpus in its construction, it provides a control independent of the fitting corpus for lens analyses.

Calibration of language models -- the alignment between expressed or implicit confidence and empirical correctness -- is a well-studied subfield within NLP. Methods to measure it already exist. The problem is adoption: outside this subfield, NLP research regularly introduces new models, datasets, and benchmarks without checking whether the model's confidence scores are meaningful. We argue that this adoption gap is a major obstacle to trustworthy LLM evaluation. Miscalibration causes problems in two distinct areas: at deployment, where overconfident mistakes cause real harm, and inside the research pipeline, where methods like LLM-as-a-judge, synthetic data generation, and active learning rely on calibrated confidence without verifying it. Standard calibration metrics only require two inputs per example: a confidence score and a correctness judgment. Most benchmarks in use today already provide both, meaning calibration can be reported immediately. For open-ended generation, however, defining these two inputs is still an open challenge. We argue that each NLP subfield should pair its main performance metric with a calibration score and call for treating calibration as an essential property of every model rather than a niche topic.

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

As demand for LLM inference grows, it is becoming increasingly important that providers and their customers can verify that inference processes are performed correctly, without errors or tampering. However, re-running the same inference process twice often leads to different results due to benign numerical noise, making it difficult to distinguish legitimate variation from actual problems. To address this problem, we introduce Token-DiFR (Token-Divergence-From-Reference), a method for verifying inference outputs by comparing generated tokens against predictions made by a trusted reference implementation conditioned on the same random seed. Sampling seed synchronization tightly constrains valid outputs, leaving providers minimal room to deviate from correct inference, which allows output tokens themselves to serve as auditable evidence of correctness at zero additional cost to the provider. Token-DiFR reliably identifies sampling errors, simulated bugs, and model quantization, detecting 4-bit quantization with AUC > 0.999 within 300 output tokens. For applications requiring sample-efficient forward-pass verification, we additionally introduce Activation-DiFR, a scheme that uses random orthogonal projections to compress activations into compact fingerprints for subsequent verification. Activation-DiFR detects 4-bit quantization with AUC > 0.999 using just 2 output tokens, while reducing communication overhead by 25-75% relative to existing methods. We release an open-source integration with vLLM to accelerate practical deployment of verifiable inference.

Gaussian-corrupted sentence embeddings have no direct linguistic interpretation, yet continuous diffusion language models can generate fluent text from them. We study this puzzle through Embedded Language Flows (ELF) and identify a decoder-basin mechanism: our evidence suggests that denoising becomes reliable when trajectories reach regions where the native decoder can read stable tokens. We introduce a diagnostic protocol for denoisability, semantic recoverability, order sensitivity, decoder compatibility, and trajectory reliability. It exposes failures hidden by scalar metrics: low mean-squared error can discard linguistic content, low perplexity can reflect low-entropy collapse, and clean latent reconstruction can coexist with a narrow decoder basin. A decoder-margin bound explains why token recovery depends on margin and local decoder sensitivity, not latent error alone. Auditing public ELF checkpoints reveals an interface phase diagram: early predictions are weakly readable, mid-trajectory disagreement marks a competition region, and late predictions enter a high-margin decoder basin. Once inside, token realization is surprisingly simple on generated ELF states: frozen T5 (Text-to-Text Transfer Transformer) token-embedding lookup recovers 93--96% of native decoder decisions, and a single linear readout reaches 97.9% agreement at 32k samples, leaving an approx1.1--1.2 perplexity gap in a structured residual tail. Under conservative held-out gates, a margin rule exits roughly 17--28% earlier in denoising steps under an explicit diagnostic monitor. Boundary checks on LangFlow, BitstreamDiffusion, and the Continuous Latent Diffusion Language Model (Cola-DLM) show that the same interface questions remain meaningful when the state object and decoder change. Continuous and latent diffusion language models should therefore be evaluated as representation-decoder systems.

We consider the issue of calibration in large language models (LLM). Recent studies have found that common interventions such as instruction tuning often result in poorly calibrated LLMs. Although calibration is well-explored in traditional applications, calibrating LLMs is uniquely challenging. These challenges stem as much from the severe computational requirements of LLMs as from their versatility, which allows them to be applied to diverse tasks. Addressing these challenges, we propose THERMOMETER, a calibration approach tailored to LLMs. THERMOMETER learns an auxiliary model, given data from multiple tasks, for calibrating a LLM. It is computationally efficient, preserves the accuracy of the LLM, and produces better-calibrated responses for new tasks. Extensive empirical evaluations across various benchmarks demonstrate the effectiveness of the proposed method.

Speech deepfake detectors usually emit one score per utterance, but a borderline score does not reveal why two examples differ during retrospective error analysis. We ask whether a final score can be calibrated from component fields while keeping those fields visible for inspection. We build a decision record with a passive detector score and a score from a probe applied to a marked copy. It also includes retrieval support held out of the evaluated family, a margin from a support-set profile, and raw neighbor closeness. A cross-fit calibrator combines these fields and two differences between raw scores into one final score. On matched ASVspoof development data, the calibrated record reduces equal error rate (EER) by 3.48 percentage points relative to the fixed retrieval-augmented rule. It reaches 8.43% EER, whereas a passive WavLM baseline reaches 6.71% on the same subset. The record is therefore not the strongest detector in this comparison. Its value is to retain inspectable component fields while producing one scalar score for retrospective diagnosis.

Reliable usage of object detectors require them to be calibrated -- a crucial problem that requires careful attention. Recent approaches towards this involve (1) designing new loss functions to obtain calibrated detectors by training them from scratch, and (2) post-hoc Temperature Scaling (TS) that learns to scale the likelihood of a trained detector to output calibrated predictions. These approaches are then evaluated based on a combination of Detection Expected Calibration Error (D-ECE) and Average Precision. In this work, via extensive analysis and insights, we highlight that these recent evaluation frameworks, evaluation metrics, and the use of TS have notable drawbacks leading to incorrect conclusions. As a step towards fixing these issues, we propose a principled evaluation framework to jointly measure calibration and accuracy of object detectors. We also tailor efficient and easy-to-use post-hoc calibration approaches such as Platt Scaling and Isotonic Regression specifically for object detection task. Contrary to the common notion, our experiments show that once designed and evaluated properly, post-hoc calibrators, which are extremely cheap to build and use, are much more powerful and effective than the recent train-time calibration methods. To illustrate, D-DETR with our post-hoc Isotonic Regression calibrator outperforms the recent train-time state-of-the-art calibration method Cal-DETR by more than 7 D-ECE on the COCO dataset. Additionally, we propose improved versions of the recently proposed Localization-aware ECE and show the efficacy of our method on these metrics as well. Code is available at: https://github.com/fiveai/detection_calibration.

Large Language Models (LLMs) are proficient in natural language processing tasks, but their deployment is often restricted by extensive parameter sizes and computational demands. This paper focuses on post-training quantization (PTQ) in LLMs, specifically 4-bit weight and 8-bit activation (W4A8) quantization, to enhance computational efficiency -- a topic less explored compared to weight-only quantization. We present two innovative techniques: activation-quantization-aware scaling (AQAS) and sequence-length-aware calibration (SLAC) to enhance PTQ by considering the combined effects on weights and activations and aligning calibration sequence lengths to target tasks. Moreover, we introduce dINT, a hybrid data format combining integer and denormal representations, to address the underflow issue in W4A8 quantization, where small values are rounded to zero. Through rigorous evaluations of LLMs, including OPT and LLaMA, we demonstrate that our techniques significantly boost task accuracies to levels comparable with full-precision models. By developing arithmetic units compatible with dINT, we further confirm that our methods yield a 2times hardware efficiency improvement compared to 8-bit integer MAC unit.

Post-hoc calibration corrects reported confidence, yet a multiclass calibrator can also change the associated top-1 prediction. Accuracy captures only the net effect of these changes on correctness, not how often predictions change; the Top-1 Prediction Change Rate (TPCR) instead measures this frequency. We propose Calibrator-Output Repair for Top-1 Decision Preservation (CORD), the first post-fit adapter to impose exact prediction preservation by repairing the full calibrated probability vector. From the original and calibrated outputs alone, CORD determines the mass assigned to the original top-1. The calibrated conditional distribution allocates the remaining mass over the other classes, yielding a repaired vector whose own argmax recovers the original prediction. On the calibration split, CORD coordinates the repaired masses to retain the calibrated outputs' mean mass on original predictions whenever attainable. The adapter alters neither the fitted calibrator nor its direct output, fits no additional supervised map, and requires no user- or validation-tuned hyperparameter. Across CIFAR-10/100 and ImageNet-1K, CORD attains zero TPCR by construction and lowers mean ECE, NLL, and Brier relative to the corresponding direct outputs in every dataset; paired gains persist under distribution shift and across calibration-set sizes. CORD thus removes the preservation constraint from calibrator fitting and assigns exact recovery of the original decision to subsequent output repair. Our code is available at https://github.com/labhai/CORD.

Prompting and in-context learning (ICL) have become efficient learning paradigms for large language models (LLMs). However, LLMs suffer from prompt brittleness and various bias factors in the prompt, including but not limited to the formatting, the choice verbalizers, and the ICL examples. To address this problem that results in unexpected performance degradation, calibration methods have been developed to mitigate the effects of these biases while recovering LLM performance. In this work, we first conduct a systematic analysis of the existing calibration methods, where we both provide a unified view and reveal the failure cases. Inspired by these analyses, we propose Batch Calibration (BC), a simple yet intuitive method that controls the contextual bias from the batched input, unifies various prior approaches, and effectively addresses the aforementioned issues. BC is zero-shot, inference-only, and incurs negligible additional costs. In the few-shot setup, we further extend BC to allow it to learn the contextual bias from labeled data. We validate the effectiveness of BC with PaLM 2-(S, M, L) and CLIP models and demonstrate state-of-the-art performance over previous calibration baselines across more than 10 natural language understanding and image classification tasks.

Token-level reweighting is a simple yet effective mechanism for controlling supervised fine-tuning, but common indicators are largely one-dimensional: the ground-truth probability reflects downstream alignment, while token entropy reflects intrinsic uncertainty induced by the pre-training prior. Ignoring entropy can misidentify noisy or easily replaceable tokens as learning-critical, while ignoring probability fails to reflect target-specific alignment. RankTuner introduces a probability--entropy calibration signal, the Relative Rank Indicator, which compares the rank of the ground-truth token with its expected rank under the prediction distribution. The inverse indicator is used as a token-wise Relative Scale to reweight the fine-tuning objective, focusing updates on truly under-learned tokens without over-penalizing intrinsically uncertain positions. Experiments on multiple backbones show consistent improvements on mathematical reasoning benchmarks, transfer gains on out-of-distribution reasoning, and pre code generation performance over probability-only or entropy-only reweighting baselines.

LLM cascades and model routing promise lower inference cost by sending easy queries to a small model and escalating hard ones to a large model, but most deployed routers use uncalibrated confidence scores and require per-workload threshold tuning. We present UCCI, a calibration-first router that maps token-level margin uncertainty to a per-query error probability via isotonic regression and selects the escalation threshold by constrained cost minimization. Under three explicit assumptions, threshold policies on the calibrated score are cost-optimal, and isotonic calibration achieves O(n^{-1/3}) sample complexity for expected calibration error (ECE). On a production named entity recognition workload of 75,000 queries served by 4B and 12B instruction-tuned LLMs on H100 GPUs, UCCI cuts inference cost by 31% (95% CI: [27%, 35%]) at micro-F1 = 0.91 while reducing ECE from 0.12 to 0.03. At the same operating point, UCCI beats entropy thresholding, split-conformal routing, and a FrugalGPT-style learned threshold. All cascade results use end-to-end routing on actual model outputs and measured H100 latency, not simulated routing from global accuracies or nominal API prices.

Large Language Models (LLMs) have demonstrated great capabilities in solving a wide range of tasks in a resource-efficient manner through prompting, which does not require task-specific training, but suffers from performance fluctuation when there are multiple prompt candidates. Previous works have introduced gradient-free probability-based prompt selection methods that aim to choose the optimal prompt among the candidates for a given task but fail to provide a comprehensive and fair comparison between each other. In this paper, we propose a unified framework to interpret and evaluate the existing probability-based prompt selection methods by performing extensive experiments on 13 common NLP tasks. We find that all existing methods can be unified into some variant of the method that maximizes the mutual information between the input and the corresponding model output (denoted as MI). Using the finding, we develop several variants of MI and increases the effectiveness of the best prompt selection method from 87.79% to 94.98%, measured as the ratio of the performance of the selected prompt to that of the optimal oracle prompt. Furthermore, we propose a novel calibration method called Calibration by Marginalization (CBM) that is orthogonal to existing methods and helps increase the prompt selection effectiveness of the best method by 99.44%. The code and datasets used in our work will be released at https://github.com/soheeyang/unified-prompt-selection.

This study addresses the issue observed in Large Vision Language Models (LVLMs), where excessive attention on a few image tokens, referred to as blind tokens, leads to hallucinatory responses in tasks requiring fine-grained understanding of visual objects. We found that tokens receiving lower attention weights often hold essential information for identifying nuanced object details -- ranging from merely recognizing object existence to identifying their attributes (color, position, etc.) and understanding their relationships. To counteract the over-emphasis on blind tokens and to accurately respond to user queries, we introduce a technique called Attentional Vision Calibration (AVC). During the decoding phase, AVC identifies blind tokens by analyzing the image-related attention distribution. It then dynamically adjusts the logits for the next token prediction by contrasting the logits conditioned on the original visual tokens with those conditioned on the blind tokens. This effectively lowers the dependency on blind tokens and promotes a more balanced consideration of all tokens. We validate AVC on benchmarks such as POPE, MME, and AMBER, where it consistently outperforms existing decoding techniques in mitigating object hallucinations in LVLMs.

Reading measurement instruments is effortless for humans and requires relatively little domain expertise, yet it remains surprisingly challenging for current vision-language models (VLMs) as we find in preliminary evaluation. In this work, we introduce MeasureBench, a benchmark on visual measurement reading covering both real-world and synthesized images of various types of measurements, along with an extensible pipeline for data synthesis. Our pipeline procedurally generates a specified type of gauge with controllable visual appearance, enabling scalable variation in key details such as pointers, scales, fonts, lighting, and clutter. Evaluation on popular proprietary and open-weight VLMs shows that even the strongest frontier VLMs struggle measurement reading in general. A consistent failure mode is indicator localization: models can read digits or labels but misidentify the key positions of pointers or alignments, leading to big numeric errors despite plausible textual reasoning. We have also conducted preliminary experiments with reinforcement learning over synthetic data, and find encouraging results on in-domain synthetic subset but less promising for real-world images. Our analysis highlights a fundamental limitation of current VLMs in fine-grained spatial grounding. We hope this resource can help future advances on visually grounded numeracy and precise spatial perception of VLMs, bridging the gap between recognizing numbers and measuring the world.

Pancreatic ductal adenocarcinoma (PDAC) segmentation on contrast-enhanced CT is inherently ambiguous: inter-rater disagreement among experts reflects genuine uncertainty rather than annotation noise. Standard deep learning approaches assume a single ground truth, producing probabilistic outputs that can be poorly calibrated and difficult to interpret under such ambiguity. We present TwinTrack, a framework that addresses this gap through post-hoc calibration of ensemble segmentation probabilities to the empirical mean human response (MHR) -the fraction of expert annotators labeling a voxel as tumor. Calibrated probabilities are thus directly interpretable as the expected proportion of annotators assigning the tumor label, explicitly modeling inter-rater disagreement. The proposed post-hoc calibration procedure is simple and requires only a small multi-rater calibration set. It consistently improves calibration metrics over standard approaches when evaluated on the MICCAI 2025 CURVAS-PDACVI multi-rater benchmark.

In the era of large language models, creative writing quality lacks a computable theoretical anchor. The dominant approaches are rubric scoring -- decomposing holistic aesthetic judgment into sub-scores -- and RLHF preference signals -- replacing quality with group votes. Both bypass the statistical structure of the text itself. This paper provides an information-theoretic foundation to fill this gap. We propose 'calibrated surprise' as the information-theoretic essence of excellent creative writing. This judgment matches reading intuition and covers its opposite. This literary judgment admits a precise mathematical formulation. Under full-dimensional constraints Y, feasible writing choices are forced into an extremely narrow space. The rare survivors are, from the unconstrained perspective, exactly the least predictable choices. Both are measured precisely by Shannon mutual information I(X;Y) = H(X) - H(X|Y) -- 'calibrated' corresponds to H(X|Y) approaching 0; 'surprising' corresponds to H(X) going high. The subtraction structure of the formula naturally separates 'well-grounded surprise' from 'pure noise'. We use token-level logprobs from Qwen1.5-7B as an operational proxy for the ideal reader's probability distribution. Across 20 pairs (12 Chinese / 8 English) of high-quality vs. systematically degraded literary passages, 20/20 pairs support the core prediction: high-quality passages have systematically higher I(X;Y) than their degraded versions.

Whenever we use devices to take measurements, calibration is indispensable. While the purpose of calibration is to reduce bias and uncertainty in the measurements, it can be quite difficult, expensive, and sometimes even impossible to implement. We study a challenging problem called self-calibration, i.e., the task of designing an algorithm for devices so that the algorithm is able to perform calibration automatically. More precisely, we consider the setup y = A(d) x + epsilon where only partial information about the sensing matrix A(d) is known and where A(d) linearly depends on d. The goal is to estimate the calibration parameter d (resolve the uncertainty in the sensing process) and the signal/object of interests x simultaneously. For three different models of practical relevance, we show how such a bilinear inverse problem, including blind deconvolution as an important example, can be solved via a simple linear least squares approach. As a consequence, the proposed algorithms are numerically extremely efficient, thus potentially allowing for real-time deployment. We also present a variation of the least squares approach, which leads to a~spectral method, where the solution to the bilinear inverse problem can be found by computing the singular vector associated with the smallest singular value of a certain matrix derived from the bilinear system. Explicit theoretical guarantees and stability theory are derived for both techniques; and the number of sampling complexity is nearly optimal (up to a poly-log factor). Applications in imaging sciences and signal processing are discussed and numerical simulations are presented to demonstrate the effectiveness and efficiency of our approach.

Modern end-to-end automatic speech recognition (ASR) models like Whisper not only suffer from reduced recognition accuracy in noise, but also exhibit overconfidence - assigning high confidence to wrong predictions. We conduct a systematic analysis of Whisper's behavior in additive noise conditions and find that overconfident errors increase dramatically at low signal-to-noise ratios, with 10-20% of tokens incorrectly predicted with confidence above 0.7. To mitigate this, we propose a lightweight, post-hoc calibration framework that detects potential overconfidence and applies temperature scaling selectively to those tokens, without altering the underlying ASR model. Evaluations on the R-SPIN dataset demonstrate that, in the low signal-to-noise ratio range (-18 to -5 dB), our method reduces the expected calibration error (ECE) by 58% and triples the normalized cross entropy (NCE), yielding more reliable confidence estimates under severe noise conditions.

Large Language Model (LLM) inference is typically memory-intensive, especially when processing large batch sizes and long sequences, due to the large size of key-value (KV) cache. Vector Quantization (VQ) is recently adopted to alleviate this issue, but we find that the existing approach is susceptible to distribution shift due to its reliance on calibration datasets. To address this limitation, we introduce NSNQuant, a calibration-free Vector Quantization (VQ) technique designed for low-bit compression of the KV cache. By applying a three-step transformation-1) a token-wise normalization (Normalize), 2) a channel-wise centering (Shift), and 3) a second token-wise normalization (Normalize)-with Hadamard transform, NSNQuant effectively aligns the token distribution with the standard normal distribution. This alignment enables robust, calibration-free vector quantization using a single reusable codebook. Extensive experiments show that NSNQuant consistently outperforms prior methods in both 1-bit and 2-bit settings, offering strong generalization and up to 3times throughput gain over full-precision baselines.

Allocating more computation during inference time (test-time scaling) improves language model performance, especially for reasoning tasks. However, popular methods like Best-of-N sampling often show diminishing returns as N increases. To address this inefficiency, we introduce a general test-time calibration framework that adaptively modifies the model toward high-reward reasoning paths, with theoretical guarantees of improving the lower bound of expected reward under finite sampling, all without large language model (LLM) retraining. Within this framework, we propose CarBoN (Calibrated Best-of-N), a two-phase method that first explores the solution space and then learns a calibration of the logits via an input-specific temperature T and additive shift vector delta, guiding generation toward more reliable reasoning. Experiments on MATH-500 and AIME-2024 show that CarBoN improves efficiency, with up to 4times fewer rollouts to reach the same accuracy, while often achieving higher accuracy under fixed budgets. We also analyze the complementary roles of T and delta in balancing output diversity and correctness, and demonstrate that the framework also generalizes to step-level sampling strategies such as beam search. For more information, please refer to our project page at huggingface.co/spaces/TrustSafeAI/Test-Time-Calibration.

Deep neural networks have demonstrated remarkable performance across numerous learning tasks but often suffer from miscalibration, resulting in unreliable probability outputs. This has inspired many recent works on mitigating miscalibration, particularly through post-hoc recalibration methods that aim to obtain calibrated probabilities without sacrificing the classification performance of pre-trained models. In this study, we summarize and categorize previous works into three general strategies: intuitively designed methods, binning-based methods, and methods based on formulations of ideal calibration. Through theoretical and practical analysis, we highlight ten common limitations in previous approaches. To address these limitations, we propose a probabilistic learning framework for calibration called h-calibration, which theoretically constructs an equivalent learning formulation for canonical calibration with boundedness. On this basis, we design a simple yet effective post-hoc calibration algorithm. Our method not only overcomes the ten identified limitations but also achieves markedly better performance than traditional methods, as validated by extensive experiments. We further analyze, both theoretically and experimentally, the relationship and advantages of our learning objective compared to traditional proper scoring rule. In summary, our probabilistic framework derives an approximately equivalent differentiable objective for learning error-bounded calibrated probabilities, elucidating the correspondence and convergence properties of computational statistics with respect to theoretical bounds in canonical calibration. The theoretical effectiveness is verified on standard post-hoc calibration benchmarks by achieving state-of-the-art performance. This research offers valuable reference for learning reliable likelihood in related fields.

Speculative decoding accelerates Large Language Models (LLMs) inference by using a lightweight draft model to propose candidate tokens that are verified in parallel by the target model. However, existing draft model training objectives are not directly aligned with the inference-time goal of maximizing consecutive token acceptance. To address this issue, we reformulate the draft model optimization objective, shifting the focus from token prediction accuracy to the overall acceptance length. In this paper, we build upon PARD to propose PARD-2, a dual-mode speculative decoding framework with Confidence-Adaptive Token (CAT) optimization. This approach adaptively reweights each token to better align with the verification process. Notably, PARD-2 enables a single draft model to support both target-dependent and target-independent modes. Experiments across diverse models and tasks demonstrate that PARD-2 achieves up to 6.94times lossless acceleration, surpassing EAGLE-3 by 1.9times and PARD by 1.3times on Llama3.1-8B. Our code is available at https://github.com/AMD-AGI/PARD.

With the increasing adoption of vision-language models (VLMs) in critical decision-making systems such as healthcare or autonomous driving, the calibration of their uncertainty estimates becomes paramount. Yet, this dimension has been largely underexplored in the VLM test-time prompt-tuning (TPT) literature, which has predominantly focused on improving their discriminative performance. Recent state-of-the-art advocates for enforcing full orthogonality over pairs of text prompt embeddings to enhance separability, and therefore calibration. Nevertheless, as we theoretically show in this work, the inherent gradients from fully orthogonal constraints will strongly push semantically related classes away, ultimately making the model overconfident. Based on our findings, we propose Semantic Orthogonal Calibration (SoC), a Huber-based regularizer that enforces smooth prototype separation while preserving semantic proximity, thereby improving calibration compared to prior orthogonality-based approaches. Across a comprehensive empirical validation, we demonstrate that SoC consistently improves calibration performance, while also maintaining competitive discriminative capabilities.

Safe deployment of large language models (LLMs) may benefit from a reliable method for assessing their generated content to determine when to abstain or to selectively generate. While likelihood-based metrics such as perplexity are widely employed, recent research has demonstrated the limitations of using sequence-level probability estimates given by LLMs as reliable indicators of generation quality. Conversely, LLMs have demonstrated strong calibration at the token level, particularly when it comes to choosing correct answers in multiple-choice questions or evaluating true/false statements. In this work, we reformulate open-ended generation tasks into token-level prediction tasks, and leverage LLMs' superior calibration at the token level. We instruct an LLM to self-evaluate its answers, employing either a multi-way comparison or a point-wise evaluation approach, with the option to include a ``None of the above'' option to express the model's uncertainty explicitly. We benchmark a range of scoring methods based on self-evaluation and evaluate their performance in selective generation using TruthfulQA and TL;DR. Through experiments with PaLM-2 and GPT-3, we demonstrate that self-evaluation based scores not only improve accuracy, but also correlate better with the overall quality of generated content.

Quantization is an effective technique for reducing the storage footprint and computational costs of Large Language Models (LLMs), but it often results in performance degradation. Existing post-training quantization methods typically use small, English-only calibration sets; however, their impact on multilingual models remains underexplored. We systematically evaluate eight calibration settings (five single-language and three multilingual mixes) on two quantizers (GPTQ, AWQ) on data from 10 languages. Our findings reveal a consistent trend: non-English and multilingual calibration sets significantly improve perplexity compared to English-only baselines. Specifically, we observe notable average perplexity gains across both quantizers on Llama3.1 8B and Qwen2.5 7B, with multilingual mixes achieving the largest overall reductions of up to 3.52 points in perplexity. Furthermore, our analysis indicates that tailoring calibration sets to the evaluation language yields the largest improvements for individual languages, underscoring the importance of linguistic alignment. We also identify specific failure cases where certain language-quantizer combinations degrade performance, which we trace to differences in activation range distributions across languages. These results highlight that static one-size-fits-all calibration is suboptimal and that tailoring calibration data, both in language and diversity, plays a crucial role in robustly quantizing multilingual LLMs.

A trainable input embedding table assigns each vocabulary item an independently adjustable vector. We investigate whether this token-specific parameterization is required for substantial language-modeling capability, or whether a shared Transformer can learn from fixed token identities. We compare three decoder-only language models trained from scratch with the same tokenizer, contextual backbone, untied output-head architecture, and training recipe, with a target budget of 100 billion prediction tokens per model. Their input interfaces are a learned table, canonical 16-bit token-ID codes, and one fixed invertible recoding over GF(2). The fixed codes are repeated to model width without an additional trainable input projection. Both fixed-code models acquire substantial capabilities: canonical codes achieve 52.40\% HellaSwag normalized accuracy, 70.51\% PIQA accuracy, and 42.75\% LAMBADA accuracy. The learned-input control performs better on several evaluations, including HellaSwag and LAMBADA, so these results establish viability rather than performance parity. The fixed interfaces remove 100.7 million trainable parameters, yielding 1.711B-parameter models, but parameter reduction is not the central result. These single-run experiments distinguish architectural necessity from empirical utility: independently trainable token-specific input vectors are not required for the observed capabilities. A fixed identity interface also provides a controlled setting for studying representation learning downstream of an immutable input, without establishing where particular capabilities are localized.

Autoregressive large language model inference repeatedly invokes the target model to generate one token at a time, making generation sensitive to GPU memory movement and sequential execution. This study evaluates two-token multi-token prediction (MTP) against autoregressive decoding in a controlled single-request deployment on an NVIDIA A10G GPU. A 360-request benchmark covered plain-text, reasoning-intensive, and tool-calling workloads, while runtime telemetry, Nsight Systems, PyTorch Profiler, and selected Nsight Compute measurements were used to explain the observed performance. MTP increased output throughput by \(1.91\times\) to \(2.19\times\) across all prompts and reduced time to first output by 10.0--14.2\%. Median mean acceptance length ranged from 2.370 to 2.595 tokens per verification iteration. Profiling showed that MTP introduced a longer and more complex execution path, including proposal, sampling, attention, gathering, and reduction operations. However, it required 56.4--78.1\% fewer executions of the selected repeating CUDA Graph per generated token. The dominant MTP GEMM kernel was not faster than the dominant autoregressive GEMV kernel, and selected instances of both approached the A10G memory-bandwidth limit. These results show that MTP improved inference through amortization: greater token progress reduced repeated GPU execution sufficiently to outweigh the additional speculative-execution cost.

We present any4, a learned 4-bit weight quantization solution for large language models (LLMs) providing arbitrary numeric representations without requiring pre-processing of weights or activations. any4 yields higher accuracy compared to other related 4-bit numeric representation types: int4, fp4 and nf4, as evaluated on a range of model sizes, generations and families (Llama 2, Llama 3, Mistral and Mixtral). While any4 does not require preprocessing of weights or activations, it is also competitive with orthogonal techniques that require such preprocessing (e.g., AWQ and GPTQ). We also experiment with any3 and any2 and show competitiveness at lower bits. Additionally, we show that we can calibrate using a single curated diverse sample rather than hundreds of samples from a dataset as done in most quantization approaches. We also open source tinygemm, a latency optimized GPU matrix multiplication library for LLMs, that implements any4 using a GPU-efficient lookup table strategy along with other common quantization methods. We open source our code at https://github.com/facebookresearch/any4 .

Scaling the size of language models to tens of billions of parameters has led to impressive performance on a wide range of tasks. At generation, these models are used auto-regressively, requiring a forward pass for each generated token, and thus reading the full set of parameters from memory. This memory access forms the primary bottleneck for generation and it worsens as the model size increases. Moreover, executing a forward pass for multiple tokens in parallel often takes nearly the same time as it does for just one token. These two observations lead to the development of speculative sampling, where a second smaller model is used to draft a few tokens, that are then validated or rejected using a single forward pass of the large model. Unfortunately, this method requires two models that share the same tokenizer and thus limits its adoption. As an alternative, we propose to use parallel decoding as a way to draft multiple tokens from a single model with no computational cost, nor the need for a second model. Our approach only requires an additional input token that marks the words that will be generated simultaneously. We show promising performance (up to 30% speed-up) while requiring only as few as O(d_{emb}) additional parameters.

Conventional Vision-Language Models(VLMs) typically utilize a fixed number of vision tokens, regardless of task complexity. This one-size-fits-all strategy introduces notable inefficiencies: using excessive tokens leads to unnecessary computational overhead in simpler tasks, whereas insufficient tokens compromise fine-grained visual comprehension in more complex contexts. To overcome these limitations, we present TokenFLEX, an innovative and adaptable vision-language framework that encodes images into a variable number of tokens for efficient integration with a Large Language Model (LLM). Our approach is underpinned by two pivotal innovations. Firstly, we present a novel training paradigm that enhances performance across varying numbers of vision tokens by stochastically modulating token counts during training. Secondly, we design a lightweight vision token projector incorporating an adaptive pooling layer and SwiGLU, allowing for flexible downsampling of vision tokens and adaptive selection of features tailored to specific token counts. Comprehensive experiments reveal that TokenFLEX consistently outperforms its fixed-token counterparts, achieving notable performance gains across various token counts enhancements of 1.6%, 1.0%, and 0.4% with 64, 144, and 256 tokens, respectively averaged over eight vision-language benchmarks. These results underscore TokenFLEX's remarkable flexibility while maintaining high-performance vision-language understanding.

The increasing capability and widespread usage of large language models (LLMs) highlight the desirability of automatic detection of LLM-generated text. Zero-shot detectors, due to their training-free nature, have received considerable attention and notable success. In this paper, we identify a new feature, token cohesiveness, that is useful for zero-shot detection, and we demonstrate that LLM-generated text tends to exhibit higher token cohesiveness than human-written text. Based on this observation, we devise TOCSIN, a generic dual-channel detection paradigm that uses token cohesiveness as a plug-and-play module to improve existing zero-shot detectors. To calculate token cohesiveness, TOCSIN only requires a few rounds of random token deletion and semantic difference measurement, making it particularly suitable for a practical black-box setting where the source model used for generation is not accessible. Extensive experiments with four state-of-the-art base detectors on various datasets, source models, and evaluation settings demonstrate the effectiveness and generality of the proposed approach. Code available at: https://github.com/Shixuan-Ma/TOCSIN.

As the scale of training corpora for large language models (LLMs) grows, model developers become increasingly reluctant to disclose details on their data. This lack of transparency poses challenges to scientific evaluation and ethical deployment. Recently, pretraining data detection approaches, which infer whether a given text was part of an LLM's training data through black-box access, have been explored. The Min-K\% Prob method, which has achieved state-of-the-art results, assumes that a non-training example tends to contain a few outlier words with low token probabilities. However, the effectiveness may be limited as it tends to misclassify non-training texts that contain many common words with high probabilities predicted by LLMs. To address this issue, we introduce a divergence-based calibration method, inspired by the divergence-from-randomness concept, to calibrate token probabilities for pretraining data detection. We compute the cross-entropy (i.e., the divergence) between the token probability distribution and the token frequency distribution to derive a detection score. We have developed a Chinese-language benchmark, PatentMIA, to assess the performance of detection approaches for LLMs on Chinese text. Experimental results on English-language benchmarks and PatentMIA demonstrate that our proposed method significantly outperforms existing methods. Our code and PatentMIA benchmark are available at https://github.com/zhang-wei-chao/DC-PDD.

Typed-decision models such as TypeSafe's Jev answer a declared yes/no or multiple-choice question about a state with a probability instead of text, and their evaluations report accuracy and calibration. Neither requires that the probabilities a model gives to logically related questions fit together item by item, which is what a system that acts on those probabilities needs. We test this property, coherence, with a battery of logically linked questions that needs no labels. For 160 items from ChaosNLI and PubMedQA, each with three mutually exclusive labels, we ask whether the label is X, whether it is not X, whether it is one of the other two labels, and which label applies. On 480 negation pairs, Jev's probabilities for "the label is X" and "the label is not X" miss summing to one by 0.064 on average (95% CI 0.055 to 0.072). Qwen3.8-27B, run from its official BF16 weights, misses by 0.293 with first-token probabilities and by 0.122 with verbalized probabilities. The gap to the first-token readout persists on pairs where both systems give similar probabilities, without double-negation labels, and after averaging Jev's repeated calls. Jev is not coherent either: its violations are about five times its repeat noise, and it over-endorses statements about single labels, so that its three single-label probabilities sum to 1.14 on average. The two systems also fail differently. Qwen3.8-27B's first-token readout under-endorses the complement of a label whether or not the question contains "not", rejecting both a statement and its negation in 196 of 480 pairs, and it does not become more coherent where it is more confident, whereas Jev's violations concentrate where its answer is uncertain. Because the checks need no labels, they expose biases that appear only when question forms are compared, and inconsistencies within items.

A long-horizon agent's trace outgrows both of its consumers: the human observer monitoring the run, and the agent itself, whose bounded context the trace must be folded back into. We present a live trace model, an append-only event ledger folded incrementally into typed run state and compiled into per-consumer views, and evaluate it for both consumers against deterministic ground truth. For the observer side, evaluated with an LLM reader as proxy, the compiled view answers monitoring questions using approximately 14x and 15x fewer input tokens (by reader) and at 5-7x lower cost than a budget-capped single-call reading of the raw trace, with higher accuracy (0.85-0.87 versus 0.48). Because the questions were co-designed with the view schema, we treat the token and cost reduction, conditional on schema coverage, as the transferable result. For the agent, on 120-link sequential-dependency tasks, mechanisms that maintain the task's running statistic in per-step state succeed where full-context prompting fails (30/30 versus 8/30 under a clean protocol, n=30, labeled descriptive owing to benchmark-system co-development); a prompt-level scratchpad matches the fold's accuracy at lower cost, and a two-arm decomposition attributes the fold's accuracy to its deterministic aggregate and its cost advantage to its compactness. The fold's remaining value over cheaper alternatives is deterministic auditability and serving the observer from the same state. We derive eleven candidate requirements for trace folding from observed failures and delimit them with an order-sensitive task family on which the fold ceases to help. Code, benchmarks, a regenerable synthetic corpus, and all workbench traces are released.

Large reasoning models achieve strong performance on complex tasks by generating extended chains of thought, but they often "overthink": continuing to reason long after they have enough information to answer correctly. This wastes inference-time compute and can hurt accuracy. Existing attempts to stop early either manipulate decoding with extra sampling and heuristics, rely on auxiliary verifier models, or operate only as post-hoc analysis pipelines without formal guarantees. We introduce LYNX, an online early-exit mechanism that turns a model's own hidden-state awareness into confidence-controlled stopping decisions. LYNX attaches exit decisions to naturally occurring reasoning cues (e.g., "hmm", "wait") during generation, trains a lightweight probe on hidden states at those cue tokens using supervision from forced exits, and wraps the resulting scores in split conformal prediction to obtain distribution-free control over premature exits. Crucially, we train and calibrate this probe once on a generic mathematical corpus and reuse it unchanged across benchmarks, decoding temperatures, and even non-mathematical tasks. Across three model families spanning 1.5B to 32B parameters, a single mathematically trained probe per base model yields strong accuracy--efficiency tradeoffs. On GSM8K, LYNX matches or improves baseline accuracy while reducing tokens by 40--65\%; on MATH-500 it improves accuracy by up to 12 points with roughly 35--60\% fewer tokens; on AIME 2024 it recovers baseline accuracy with more than 50\% token savings; and on CommonsenseQA, a non-math benchmark, it transfers zero-shot with modest accuracy gains and up to 70\% fewer tokens. Compared to state-of-the-art early-exit methods, LYNX offers competitive or superior Pareto frontiers while remaining fully online, requiring no proxy models at inference, and providing explicit, user-tunable confidence guarantees.

Reliable probability estimates are critical in many machine learning applications, yet modern classifiers are often poorly calibrated. Post-hoc calibration provides a simple and widely used solution, but the large number of proposed methods, combined with small-scale and inconsistent evaluations, makes it difficult to determine which approaches are truly effective in practice. We introduce a large-scale, standardized benchmark for post-hoc calibration, covering nearly 2000 experiments across tabular and computer vision tasks, including binary, multiclass, and large-scale classification settings. Our benchmark aggregates predictions from a diverse set of classical models, modern deep learning architectures, and foundation models, and provides unified, reproducible implementations of dozens of calibration methods within a common evaluation framework. We argue that Post-Hoc Improvement (PHI) in proper scoring rules offers a principled alternative to traditional calibration error estimators for comparing post-hoc methods, capturing both calibration quality and potential degradation to the model's predictive performance. Using this framework, we conduct the most comprehensive empirical study of post-hoc calibration to date. Our results reveal consistent patterns across domains: smooth calibration functions outperform binning-based approaches, dedicated multiclass methods are essential in high-dimensional settings, and generic machine learning models are not competitive without calibration-specific design. To facilitate future research, we release all data, code, and evaluation tools, providing a plug-and-play benchmark for developing and comparing calibration methods.

We present TokenFlow, a novel unified image tokenizer that bridges the long-standing gap between multimodal understanding and generation. Prior research attempt to employ a single reconstruction-targeted Vector Quantization (VQ) encoder for unifying these two tasks. We observe that understanding and generation require fundamentally different granularities of visual information. This leads to a critical trade-off, particularly compromising performance in multimodal understanding tasks. TokenFlow addresses this challenge through an innovative dual-codebook architecture that decouples semantic and pixel-level feature learning while maintaining their alignment via a shared mapping mechanism. This design enables direct access to both high-level semantic representations crucial for understanding tasks and fine-grained visual features essential for generation through shared indices. Our extensive experiments demonstrate TokenFlow's superiority across multiple dimensions. Leveraging TokenFlow, we demonstrate for the first time that discrete visual input can surpass LLaVA-1.5 13B in understanding performance, achieving a 7.2\% average improvement. For image reconstruction, we achieve a strong FID score of 0.63 at 384*384 resolution. Moreover, TokenFlow establishes state-of-the-art performance in autoregressive image generation with a GenEval score of 0.55 at 256*256 resolution, achieving comparable results to SDXL.

As Large Language Models (LLMs) become increasingly computationally complex, developing efficient deployment strategies, such as quantization, becomes crucial. State-of-the-art Post-training Quantization (PTQ) techniques often rely on calibration processes to maintain the accuracy of these models. However, while these calibration techniques can enhance performance in certain domains, they may not be as effective in others. This paper aims to draw attention to robust statistical approaches that can mitigate such issues. We propose a weight-adaptive PTQ method that can be considered a precursor to calibration-based PTQ methods, guiding the quantization process to preserve the distribution of weights by minimizing the Kullback-Leibler divergence between the quantized weights and the originally trained weights. This minimization ensures that the quantized model retains the Shannon information content of the original model to a great extent, guaranteeing robust and efficient deployment across many tasks. As such, our proposed approach can perform on par with most common calibration-based PTQ methods, establishing a new pre-calibration step for further adjusting the quantized weights with calibration. We show that our pre-calibration results achieve the same accuracy as some existing calibration-based PTQ methods on various LLMs.

Calibration-based methods have dominated RAW image denoising under extremely low-light environments. However, these methods suffer from several main deficiencies: 1) the calibration procedure is laborious and time-consuming, 2) denoisers for different cameras are difficult to transfer, and 3) the discrepancy between synthetic noise and real noise is enlarged by high digital gain. To overcome the above shortcomings, we propose a calibration-free pipeline for Lighting Every Drakness (LED), regardless of the digital gain or camera sensor. Instead of calibrating the noise parameters and training repeatedly, our method could adapt to a target camera only with few-shot paired data and fine-tuning. In addition, well-designed structural modification during both stages alleviates the domain gap between synthetic and real noise without any extra computational cost. With 2 pairs for each additional digital gain (in total 6 pairs) and 0.5% iterations, our method achieves superior performance over other calibration-based methods. Our code is available at https://github.com/Srameo/LED .

Large language models (LLMs) are powerful zero- and few-shot learners. However, when predicting over a set of candidate options, LLMs suffer from label biases, and existing calibration methods overlook biases arising from multi-token class labels. We tackle an issue we call label length bias, where labels of different lengths are treated inconsistently, even after standard length normalization. To mitigate it, we propose normalized contextual calibration (NCC), an effective method that normalizes and calibrates predictions at the full-label level. NCC achieves statistically significant improvements over prior approaches across multiple datasets and models, with gains of up to 10% F1. Moreover, NCC extends bias mitigation to broader tasks such as multiple-choice question answering. Our analysis shows that, when combined with in-context learning, NCC is less sensitive to few-shot example selection, requires fewer examples for competitive performance, and produces more reliable confidence estimates. These findings highlight the importance of mitigating full-label biases to improve the performance and robustness of LLM-based methods, particularly in real-world applications where class labels naturally consist of multiple tokens.

Large language models (LLMs) have demonstrated remarkable capabilities out of box for a wide range of applications, yet accuracy still remains a major growth area, especially in mission-critical domains such as biomedicine. An effective method to calibrate the confidence level on LLM responses is essential to automatically detect errors and facilitate human-in-the-loop verification. An important source of calibration signals stems from expert-stipulated programmatic supervision, which is often available at low cost but has its own limitations such as noise and coverage. In this paper, we introduce a Pareto optimal self-supervision framework that can leverage available programmatic supervision to systematically calibrate LLM responses by producing a risk score for every response, without any additional manual efforts. This is accomplished by learning a harmonizer model to align LLM output with other available supervision sources, which would assign higher risk scores to more uncertain LLM responses and facilitate error correction. Experiments on standard relation extraction tasks in biomedical and general domains demonstrate the promise of this approach, with our proposed risk scores highly correlated with the real error rate of LLMs. For the most uncertain test instances, dynamic prompting based on our proposed risk scores results in significant accuracy improvement for off-the-shelf LLMs, boosting GPT-3 results past state-of-the-art (SOTA) weak supervision and GPT-4 results past SOTA supervised results on challenging evaluation datasets.

A network trained to recover the walls, openings, and rooms of a rasterized floorplan can produce its output in two ways: by emitting the geometry as an autoregressive coordinate sequence, or by detecting it on dense junction and centerline heatmaps and assembling a graph. We compare the two readouts on the same trained network. On real scans (CubiCasa5K) detection is better on every wall measure (+2.7 wall F1 at tolerance 0.05, +5.1 at 0.015; paired bootstrap intervals exclude zero), and reading an opening heatmap the decoder never used raises opening F1 by 2.6x without retraining. Within real scans the readout's advantage grows with plan size and reverses on small plans; on clean vector renders sequence decoding is better by 5 to 8 points where its training covered the render style, while under full domain shift the readout, given calibrated thresholds, stays ahead; neither ink density nor plan size explains the reversal. With matched data and recipe, a room-centric system with a reconciliation step and a wall-first sequence model reach comparable wall quality, so the output representation matters less than is usually assumed. A prior from the other family helps at the output but not at the input: deterministic fusion of the two outputs raises wall F1 by 7 points, whereas conditioning one model on the other's output gives no gain in three forms, including two ground-truth-content controls. We also provide an edit-cost metric that scores a draft by the human work needed to correct it, corrected CubiCasa5K annotations, and ResPlan-FP, a CC BY 4.0 benchmark of 16,998 plans with frozen splits and three baseline tracks. Code, the benchmark, and the corrected annotations are available at https://github.com/Cyprinus12138/fpvec-lab

When does a language model acquire a capability? Developmental studies usually answer this by tracking when models start producing the correct token. But that prediction passes through the unembedding matrix, or readout, which is itself still being learned during pretraining. We show that a model's hidden states can encode task information before its own readout expresses it, so timelines read from outputs conflate what the model encodes with what its readout expresses. To track the readout directly, we introduce parameter-trajectory crosscoding, which fits one sparse dictionary to every token's readout row at every checkpoint. Unlike crosscoders on activations, it needs only checkpoint weights. We use it to locate a narrow early window, 0.4-1.1% of the way through Pythia's pretraining, in which the readout reorganizes and WordNet word categories become decodable from its rows. By then, linear probes on the hidden states already decode task information that the model's own outputs do not yet show. To test whether such gaps depend on how fast the readout learns, we pretrain small models from scratch that differ only in the readout's learning rate. We find that raising it makes the readout develop earlier and the gap close sooner, with little effect on final loss. Together, these results imply that early in training, where many developmental transitions are dated, a behavioral date can reflect when the readout learns to express task information and not when the model learns it.

Confidence calibration -- the problem of predicting probability estimates representative of the true correctness likelihood -- is important for classification models in many applications. We discover that modern neural networks, unlike those from a decade ago, are poorly calibrated. Through extensive experiments, we observe that depth, width, weight decay, and Batch Normalization are important factors influencing calibration. We evaluate the performance of various post-processing calibration methods on state-of-the-art architectures with image and document classification datasets. Our analysis and experiments not only offer insights into neural network learning, but also provide a simple and straightforward recipe for practical settings: on most datasets, temperature scaling -- a single-parameter variant of Platt Scaling -- is surprisingly effective at calibrating predictions.

Attention is a fundamental component behind the remarkable achievements of large language models (LLMs). However, our current understanding of the attention mechanism, especially regarding how attention distributions are established, remains limited. Inspired by recent studies that explore the presence of attention sink in the initial token, which receives disproportionately large attention scores despite their lack of semantic importance, this work delves deeper into this phenomenon. We aim to provide a more profound understanding of the existence of attention sinks within LLMs and to uncover ways to enhance the achievable accuracy of LLMs by directly optimizing the attention distributions, without the need for weight finetuning. Specifically, this work begins with comprehensive visualizations of the attention distributions in LLMs during inference across various inputs and tasks. Based on these visualizations, to the best of our knowledge, we are the first to discover that (1) attention sinks occur not only at the start of sequences but also within later tokens of the input, and (2) not all attention sinks have a positive impact on the achievable accuracy of LLMs. Building upon our findings, we propose a training-free Attention Calibration Technique (ACT) that automatically optimizes the attention distributions on the fly during inference in an input-adaptive manner. Extensive experiments validate that ACT consistently enhances the accuracy of various LLMs across different applications. Specifically, ACT achieves an average improvement of up to 7.30% in accuracy across different datasets when applied to Llama-30B. Our code is available at https://github.com/GATECH-EIC/ACT.

Split language models keep input text on a client but send intermediate representations to a server. Attacks can reconstruct text from these messages. Comparing privacy evaluations is difficult when attackers see different messages, know different model weights or use different datasets and recovery measures. We present LLM-Attacker, a framework that records these choices and lets researchers check, compare and extend an evaluation. Compatible attacks reuse recorded messages, and their predictions are saved for independent scoring. The scoring rule requires a linked undefended reference before a defence can pass. Reports also identify attacks that remain untested. In a controlled GPT-2 experiment, adding gradients returned during training increased token recovery from 94.20% to 97.38% and exact-document recovery from 13.71% to 37.77%. The 95% interval for the token gain lay above the two-percentage-point threshold fixed before testing. This experiment is shared with a companion study; here, it tests how the evaluation responds to a change in attacker access. Further studies measure how corpus choice and compression defences affect recovery, compare an adapted published attack with its reference implementation, and test the measurement code. The framework reports implementation checks separately from measured attack effectiveness. Each privacy claim should state the attacker, dataset and scoring rule, report its controls and identify untested attacks.

Post-Training Quantization (PTQ) enhances the efficiency of Large Language Models (LLMs) by enabling faster operation and compatibility with more accessible hardware through reduced memory usage, at the cost of small performance drops. We explore the role of calibration sets in PTQ, specifically their effect on hidden activations in various notable open-source LLMs. Calibration sets are crucial for evaluating activation magnitudes and identifying outliers, which can distort the quantization range and negatively impact performance. Our analysis reveals a marked contrast in quantization effectiveness across models. The older OPT model, upon which much of the quantization literature is based, shows significant performance deterioration and high susceptibility to outliers with varying calibration sets. In contrast, newer models like Llama-2 7B, Llama-3 8B, Command-R 35B, and Mistral 7B demonstrate strong robustness, with Mistral 7B showing near-immunity to outliers and stable activations. These findings suggest a shift in PTQ strategies might be needed. As advancements in pre-training methods reduce the relevance of outliers, there is an emerging need to reassess the fundamentals of current quantization literature. The emphasis should pivot towards optimizing inference speed, rather than primarily focusing on outlier preservation, to align with the evolving characteristics of state-of-the-art LLMs.

Retrieval-augmented generation (RAG) grounds answers in retrieved passages, yet relevance does not guarantee sufficiency: a topical passage may still fail to justify the answer. We study evidence sufficiency verification for selective RAG answering, in which a verifier receives a question, a candidate answer, and retrieved evidence and decides whether the evidence supports, refutes, or is insufficient for the answer, answering only when support is established. We present SURE-RAG, an aggregation protocol that treats evidence sufficiency as a set-level property: missing hops and unresolved conflicts cannot be detected by scoring passages independently. A shared claim-evidence verifier produces a local relation distribution for each (claim, passage) pair, which SURE-RAG aggregates into four interpretable answer-level feature blocks (coverage, relation strength, uncertainty, and retrieval), producing a three-way decision and an auditable selective score. We evaluate on HotpotQA-RAG v3, a controlled multi-hop benchmark, under an artifact-aware protocol (shortcut baselines, counterfactual swaps, no-oracle checks, and GPT-4o audits). Calibrated SURE-RAG attains 0.9075 Macro-F1 (raw 0.8951 +/- 0.0069), well above DeBERTa mean-pooling (0.6516) and a GPT-4o judge (0.7284), and on par with a strong concat cross-encoder (0.8888 +/- 0.0109) while remaining fully auditable. At 30% coverage, risk falls from 0.2588 to 0.1642, a 37% relative reduction. As a boundary-mapping experiment, we contrast SURE-RAG with GPT-4o on HaluBench unsafe detection: the ranking reverses (0.3343 vs. 0.7389 unsafe-F1), indicating that controlled sufficiency verification and natural hallucination detection are distinct problems.

Large language models (LLMs) are able to solve various tasks with only a few demonstrations utilizing their in-context learning (ICL) abilities. However, LLMs often rely on their pre-trained semantic priors of demonstrations rather than on the input-label relationships to proceed with ICL prediction. In this work, we term this phenomenon as the 'Demonstration Shortcut'. While previous works have primarily focused on improving ICL prediction results for predefined tasks, we aim to rectify the Demonstration Shortcut, thereby enabling the LLM to effectively learn new input-label relationships from demonstrations. To achieve this, we introduce In-Context Calibration, a demonstration-aware calibration method. We evaluate the effectiveness of the proposed method in two settings: (1) the Original ICL Task using the standard label space and (2) the Task Learning setting, where the label space is replaced with semantically unrelated tokens. In both settings, In-Context Calibration demonstrates substantial improvements, with results generalized across three LLM families (OPT, GPT, and Llama2) under various configurations.

This paper introduces a novel Token-and-Duration Transducer (TDT) architecture for sequence-to-sequence tasks. TDT extends conventional RNN-Transducer architectures by jointly predicting both a token and its duration, i.e. the number of input frames covered by the emitted token. This is achieved by using a joint network with two outputs which are independently normalized to generate distributions over tokens and durations. During inference, TDT models can skip input frames guided by the predicted duration output, which makes them significantly faster than conventional Transducers which process the encoder output frame by frame. TDT models achieve both better accuracy and significantly faster inference than conventional Transducers on different sequence transduction tasks. TDT models for Speech Recognition achieve better accuracy and up to 2.82X faster inference than conventional Transducers. TDT models for Speech Translation achieve an absolute gain of over 1 BLEU on the MUST-C test compared with conventional Transducers, and its inference is 2.27X faster. In Speech Intent Classification and Slot Filling tasks, TDT models improve the intent accuracy by up to over 1% (absolute) over conventional Transducers, while running up to 1.28X faster. Our implementation of the TDT model will be open-sourced with the NeMo (https://github.com/NVIDIA/NeMo) toolkit.

Tabular foundation models (TFMs) increasingly rival tree ensembles, but their performance is often compute-inefficient: with standard affine scalar tokenization, each feature injects value variation through an essentially one-dimensional channel, and feature IDs/positional signals cannot increase within-feature value degrees of freedom, yielding weak early-layer value sensitivity and redundant hidden states. We present a unified tokenize-and-route framework for strong TFMs: RaBEL expands each scalar into compact localized RBF features (optionally exponent-gated) to improve conditioning and shallow-layer effective rank, while a reordered bidirectional block SrightarrowNrightarrowF aligns computation with the readout by aggregating cross-sample context before feature mixing and using attention pooling. Together, these changes yield LimiX-2M, a 2M-parameter model that outperforms larger TabPFN-v2 and TabICL baselines on widely used tabular benchmarks while reducing training and inference costs. These results highlight value-aware tokenization and readout-aligned routing as key levers for improving the accuracy--efficiency trade-off in TFMs. Model checkpoints and inference code are available at https://github.com/limix-ldm-ai/LimiX.

Post-training model compression is essential for enhancing the portability of Large Language Models (LLMs) while preserving their performance. While several compression approaches have been proposed, less emphasis has been placed on selecting the most suitable set of data (the so-called calibration data) for finding the compressed model configuration. The choice of calibration data is a critical step in preserving model capabilities both intra- and inter-tasks. In this work, we address the challenge of identifying high-performance calibration sets for both pruning and quantization by analyzing intrinsic data properties rather than model-specific signals. We introduce \textbf{ZipCal}, a model-agnostic data curation strategy that maximizes lexical diversity based on Zipfian power laws. Experiments demonstrate that our method consistently outperforms standard uniform random sampling across various pruning benchmarks. Notably, it also performs on par, in terms of downstream performance, with a state-of-the-art method that relies on model perplexity. The latter becomes prohibitively expensive at large-scale models and datasets, while \textbf{ZipCal} is on average sim240times faster due to its tractable linear complexityWe make the code and the experiments available at https://anonymous.4open.science/r/zipcal-71CD/..

Autoregressive (AR) language models generate text one token at a time, even when consecutive tokens are highly predictable given earlier context. We introduce MARS (Mask AutoRegreSsion), a lightweight fine-tuning method that teaches an instruction-tuned AR model to predict multiple tokens per forward pass. MARS adds no architectural modifications, no extra parameters, and produces a single model that can still be called exactly like the original AR model with no performance degradation. Unlike speculative decoding, which maintains a separate draft model alongside the target, or multi-head approaches such as Medusa, which attach additional prediction heads, MARS requires only continued training on existing instruction data. When generating one token per forward pass, MARS matches or exceeds the AR baseline on six standard benchmarks. When allowed to accept multiple tokens per step, it maintains baseline-level accuracy while achieving 1.5-1.7x throughput. We further develop a block-level KV caching strategy for batch inference, achieving up to 1.71x wall-clock speedup over AR with KV cache on Qwen2.5-7B. Finally, MARS supports real-time speed adjustment via confidence thresholding: under high request load, the serving system can increase throughput on the fly without swapping models or restarting, providing a practical latency-quality knob for deployment.

Overconfidence and underconfidence in machine learning classifiers is measured by calibration: the degree to which the probabilities predicted for each class match the accuracy of the classifier on that prediction. How one measures calibration remains a challenge: expected calibration error, the most popular metric, has numerous flaws which we outline, and there is no clear empirical understanding of how its choices affect conclusions in practice, and what recommendations there are to counteract its flaws. In this paper, we perform a comprehensive empirical study of choices in calibration measures including measuring all probabilities rather than just the maximum prediction, thresholding probability values, class conditionality, number of bins, bins that are adaptive to the datapoint density, and the norm used to compare accuracies to confidences. To analyze the sensitivity of calibration measures, we study the impact of optimizing directly for each variant with recalibration techniques. Across MNIST, Fashion MNIST, CIFAR-10/100, and ImageNet, we find that conclusions on the rank ordering of recalibration methods is drastically impacted by the choice of calibration measure. We find that conditioning on the class leads to more effective calibration evaluations, and that using the L2 norm rather than the L1 norm improves both optimization for calibration metrics and the rank correlation measuring metric consistency. Adaptive binning schemes lead to more stablity of metric rank ordering when the number of bins vary, and is also recommended. We open source a library for the use of our calibration measures.

Class probabilities predicted by most multiclass classifiers are uncalibrated, often tending towards over-confidence. With neural networks, calibration can be improved by temperature scaling, a method to learn a single corrective multiplicative factor for inputs to the last softmax layer. On non-neural models the existing methods apply binary calibration in a pairwise or one-vs-rest fashion. We propose a natively multiclass calibration method applicable to classifiers from any model class, derived from Dirichlet distributions and generalising the beta calibration method from binary classification. It is easily implemented with neural nets since it is equivalent to log-transforming the uncalibrated probabilities, followed by one linear layer and softmax. Experiments demonstrate improved probabilistic predictions according to multiple measures (confidence-ECE, classwise-ECE, log-loss, Brier score) across a wide range of datasets and classifiers. Parameters of the learned Dirichlet calibration map provide insights to the biases in the uncalibrated model.

Reliable confidence estimates are essential in semantic segmentation, especially in safety-critical settings where overconfident errors can mislead downstream decisions. Yet modern segmentation models often remain miscalibrated. Post-hoc calibration offers a practical way to correct confidence estimates without retraining the segmentation model, but its use in dense prediction raises structural issues that are often overlooked. We study two such issues. First, adding a constant to all logits leaves the softmax probabilities unchanged, but several standard calibrators can still depend on this arbitrary offset. As a result, two logit representations encoding the same predictive distribution may yield different calibrated probabilities. We define translation-invariant (TI) calibrators as those whose outputs are unchanged under such shifts, characterize which common calibrators satisfy this property, and construct TI counterparts of shift-sensitive calibrators to isolate the effect of removing representation dependence. Second, post-hoc calibration is typically fitted by minimizing a likelihood-based objective, whereas segmentation models are trained with task-specific metrics such as Dice. This mismatch can cause calibration to alter class orderings and degrade the deployed segmentation map. We study decision-preserving calibration under argmax- and order-preservation constraints. Since enforcing these constraints collapses affine softmax calibrators to temperature scaling, we introduce class-conditional affine calibrators that can be made argmax- or order-preserving while retaining greater expressivity, allowing us to quantify the calibration-segmentation trade-off induced by decision preservation. Across natural-image and medical segmentation benchmarks, and under corruption-based covariate shift, matched comparisons show that TI variants generally improve calibration metrics, while decision-preserving variants prevent segmentation degradation and retain strong calibration performance. These results provide practical design principles for well-defined post-hoc calibration pipelines in semantic segmentation.

We present DOCFORGE-BENCH, the first unified zero-shot benchmark for document forgery detection, evaluating 14 methods across eight datasets spanning text tampering, receipt forgery, and identity document manipulation. Unlike fine-tuning-oriented evaluations such as ForensicHub [Du et al., 2025], DOCFORGE-BENCH applies all methods with their published pretrained weights and no domain adaptation -- a deliberate design choice that reflects the realistic deployment scenario where practitioners lack labeled document training data. Our central finding is a pervasive calibration failure invisible under single-threshold protocols: methods achieve moderate Pixel-AUC (>=0.76) yet near-zero Pixel-F1. This AUC-F1 gap is not a discrimination failure but a score-distribution shift: tampered regions occupy only 0.27-4.17% of pixels in document images -- an order of magnitude less than in natural image benchmarks -- making the standard tau=0.5 threshold catastrophically miscalibrated. Oracle-F1 is 2-10x higher than fixed-threshold Pixel-F1, confirming that calibration, not representation, is the bottleneck. A controlled calibration experiment validates this: adapting a single threshold on N=10 domain images recovers 39-55% of the Oracle-F1 gap, demonstrating that threshold adaptation -- not retraining -- is the key missing step for practical deployment. Overall, no evaluated method works reliably out-of-the-box on diverse document types, underscoring that document forgery detection remains an unsolved problem. We further note that all eight datasets predate the era of generative AI editing; benchmarks covering diffusion- and LLM-based document forgeries represent a critical open gap on the modern attack surface.

While speculative decoding has recently appeared as a promising direction for accelerating the inference of large language models (LLMs), the speedup and scalability are strongly bounded by the token acceptance rate. Prevalent methods usually organize predicted tokens as independent chains or fixed token trees, which fails to generalize to diverse query distributions. In this paper, we propose DySpec, a faster speculative decoding algorithm with a novel dynamic token tree structure. We begin by bridging the draft distribution and acceptance rate from intuitive and empirical clues, and successfully show that the two variables are strongly correlated. Based on this, we employ a greedy strategy to dynamically expand the token tree at run time. Theoretically, we show that our method can achieve optimal results under mild assumptions. Empirically, DySpec yields a higher acceptance rate and speedup than fixed trees. DySpec can drastically improve the throughput and reduce the latency of token generation across various data distribution and model sizes, which significantly outperforms strong competitors, including Specinfer and Sequoia. Under low temperature setting, DySpec can improve the throughput up to 9.1times and reduce the latency up to 9.4times on Llama2-70B. Under high temperature setting, DySpec can also improve the throughput up to 6.21times, despite the increasing difficulty of speculating more than one token per step for draft model.

Cross-tokenizer knowledge distillation allows a student model to learn from teachers with incompatible vocabularies. Prior work operates on hidden states or logits; the latter is preferred as a drop-in replacement requiring no auxiliary components. Logit-based methods either use only the correct-token probability, missing the full 'dark knowledge' in the teacher's distribution, or operate on the full output distribution, relying on strict token partitioning and/or unprincipled heuristic ranking. We identify two key shortcomings of full-distribution, logit-based methods: (i) an uncommon-token failure, where critical tokens fall into the unmatched subset (e.g., Llama's 1100 multi-digit numerals under digit-splitting Qwen supervision) and are suppressed during training, reducing GSM8k from 12.89 to 2.56 compared to same-tokenizer KD from a weaker teacher; and (ii) over-conservative matching, where strict 1-to-1 matching excludes near-equivalent tokens across surface forms. These failures require distinct remedies: eliminating the partition when critical tokens are misaligned, and refining it when alignment is reliable. We propose X-Token, an approach with two complementary loss formulations targeting these issues. P-KL removes partitioning and aligns the student's distribution with the teacher's via a sparse projection matrix W (initialized from tokenizer-level string rules) to address the uncommon-token failure. H-KL retains the hybrid form while relaxing matching to align each student token with its top-ranked teacher mapping under W. Both objectives share W and extend naturally to multiple teachers. Empirically, on Llama-3.2-1B, X-Token outperforms the current state of the art GOLD by +3.82 average points with a Qwen3-4B teacher and by +0.5 with a Phi-4-Mini teacher. Further, a two-teacher setup (Phi-4-mini + Llama-3B) improves over single-teacher distillation by +1.3 points.

Building a unified visual tokenizer is essential for bridging the gap between visual understanding and generation. Yet existing approaches struggle with the inherent conflict between these tasks, as a single token space is forced to support both high-level semantic abstraction and low-level pixel reconstruction. We propose WinTok, a concise hybrid tokenizer that achieves a win-win performance by explicitly decoupling the two objectives. WinTok supplements pixel tokens with a set of learnable semantic tokens, effectively mitigating cross-task interference without incurring the computational overhead of dual tokenizers. To further enhance understanding capability, we introduce an asymmetric token distillation mechanism: the semantic tokens are guided by pretrained semantic embeddings from any visual foundation model, enabling them to inherit strong discriminative power while maintaining flexibility. Across 10 challenging benchmarks, WinTok delivers consistent improvements in reconstruction, understanding, and generation. Trained on only 50M open-source data, WinTok surpasses the strong baseline UniTok by 11.2% in classification accuracy and achieves a competitive reconstruction rFID of 0.41, despite using substantially less training data. Code is released at https://github.com/markywg/WinTok.

Parallel Speculative Decoding (PSD) accelerates traditional Speculative Decoding (SD) by overlapping draft generation with verification. However, it remains hampered by two fundamental challenges: (1) a theoretical speedup ceiling dictated by the speed ratio between the draft and target models, and (2) high computational waste and pipeline stall due to mid-sequence token rejections of early errors. To address these limitations, we introduce Double (Double Retrieval Speculative Parallelism). By bridging the gap between SD and PSD, our framework resolves the Retrieval Precision-Efficiency Dilemma through a novel synchronous mechanism. Specifically, we enable the draft model to execute iterative retrieval speculations to break the theoretical speedup limits; to alleviate rejections without rollback, the target model performs authoritative retrieval to generate multi-token guidance. Double is entirely training-free and lossless. Extensive experiments demonstrate state-of-the-art speedup of 5.3times on LLaMA3.3-70B and 2.8times on Qwen3-32B, significantly outperforming the advanced method EAGLE-3 that requires extensive model training.

Hybrid linear attention models offer an appealing path to faster long-context inference: they reduce the quadratic cost and KV-cache burden of full softmax attention while retaining much of the quality of Transformer models. A practical way to obtain such models is to convert a pretrained Transformer instead of pretraining a new architecture from scratch, but this conversion is still brittle. Simply copying the teacher attention projections into a Gated DeltaNet (GDN) student does not specify the new recurrent decay, write, and output-gating dynamics. As a result, the converted model often starts in a poor dynamical regime and must spend many distillation tokens repairing initialization rather than learning the remaining teacher behavior. We propose Taylor-Calibrate, a lightweight initialization method for hybrid GDN students. The method uses Taylor-guided teacher attention statistics to set the value projection, memory timescale, write gates, and output gate, then applies a short per-layer alignment step to match each converted layer to the teacher output. Across four teacher settings and three retained-layer policies, Taylor-Calibrate gives substantially stronger zero-shot students, with up to an 88x improvement in a representative ablation, and reaches matched recovery targets with 4.9x--9.2x fewer training tokens than naive conversion.

Speculative decoding emerges as a pivotal technique for enhancing the inference speed of Large Language Models (LLMs). Despite recent research aiming to improve prediction efficiency, multi-sample speculative decoding has been overlooked due to varying numbers of accepted tokens within a batch in the verification phase. Vanilla method adds padding tokens in order to ensure that the number of new tokens remains consistent across samples. However, this increases the computational and memory access overhead, thereby reducing the speedup ratio. We propose a novel method that can resolve the issue of inconsistent tokens accepted by different samples without necessitating an increase in memory or computing overhead. Furthermore, our proposed method can handle the situation where the prediction tokens of different samples are inconsistent without the need to add padding tokens. Sufficient experiments demonstrate the efficacy of our method. Our code is available at https://github.com/niyunsheng/EMS-SD.

Simultaneous machine translation consists in starting output generation before the entire input sequence is available. Wait-k decoders offer a simple but efficient approach for this problem. They first read k source tokens, after which they alternate between producing a target token and reading another source token. We investigate the behavior of wait-k decoding in low resource settings for spoken corpora using IWSLT datasets. We improve training of these models using unidirectional encoders, and training across multiple values of k. Experiments with Transformer and 2D-convolutional architectures show that our wait-k models generalize well across a wide range of latency levels. We also show that the 2D-convolution architecture is competitive with Transformers for simultaneous translation of spoken language.

Test-time scaling (TTS) has demonstrated remarkable success in enhancing large language models, yet its application to next-token prediction (NTP) autoregressive (AR) image generation remains largely uncharted. Existing TTS approaches for visual AR (VAR), which rely on frequent partial decoding and external reward models, are ill-suited for NTP-based image generation due to the inherent incompleteness of intermediate decoding results. To bridge this gap, we introduce ScalingAR, the first TTS framework specifically designed for NTP-based AR image generation that eliminates the need for early decoding or auxiliary rewards. ScalingAR leverages token entropy as a novel signal in visual token generation and operates at two complementary scaling levels: (i) Profile Level, which streams a calibrated confidence state by fusing intrinsic and conditional signals; and (ii) Policy Level, which utilizes this state to adaptively terminate low-confidence trajectories and dynamically schedule guidance for phase-appropriate conditioning strength. Experiments on both general and compositional benchmarks show that ScalingAR (1) improves base models by 12.5% on GenEval and 15.2% on TIIF-Bench, (2) efficiently reduces visual token consumption by 62.0% while outperforming baselines, and (3) successfully enhances robustness, mitigating performance drops by 26.0% in challenging scenarios.

Quantum computing calibration depends on interpreting experimental data, and calibration plots provide the most universal human-readable representation for this task, yet no systematic evaluation exists of how well vision-language models (VLMs) interpret them. We introduce QCalEval, the first VLM benchmark for quantum calibration plots: 243 samples across 87 scenario types from 22 experiment families, spanning superconducting qubits and neutral atoms, evaluated on six question types in both zero-shot and in-context learning settings. The best general-purpose zero-shot model reaches a mean score of 72.3, and many open-weight models degrade under multi-image in-context learning, whereas frontier closed models improve substantially. A supervised fine-tuning ablation at the 9-billion-parameter scale shows that SFT improves zero-shot performance but cannot close the multimodal in-context learning gap. As a reference case study, we release NVIDIA Ising Calibration 1, an open-weight model based on Qwen3.5-35B-A3B that reaches 74.7 zero-shot average score.

Existing bias auditing methods typically rely on model outputs, requiring costly benchmarks or judge models and potentially missing internal shifts that never appear in generated text. We propose a reference-based method that audits bias in hidden-state representations across related model variants, for example before and after fine-tuning. Because fine-tuning reshapes representation geometry, absolute hidden states are not directly comparable, so we encode each sentence by its similarities to a fixed set of anchor sentences, yielding relative representations in a shared comparison space. There we measure how target groups shift in their association with positive and negative attributes, a quantity we call the Representational Bias Shift ΔB. Across three model families and the WildGuardMix, DecodingTrust and ToxiGen benchmarks, ΔB correlates with output-level bias change in 15 of the 18 settings we test, reaching |r| = 0.84 (p < 0.001) under full fine-tuning and becoming more model-dependent under parameter-efficient adaptation. Thresholding ΔB detects checkpoints whose bias increased with ROC AUC between 0.65 and 0.99, and on WildGuardMix and DecodingTrust it separates them better than a SEAT-based baseline for all three families. ΔB is also stable under changes to the anchor set, attribute sets and target templates. Our method requires no task-specific evaluation data and audits a model in about three minutes, using 3-50times less compute than the output-level benchmarks considered here. We view it as complementary to output-based auditing rather than a replacement for it.

Honesty alignment-the ability of large language models (LLMs) to recognize their knowledge boundaries and express calibrated confidence-is essential for trustworthy deployment. Existing methods either rely on training-free confidence estimation (e.g., token probabilities, self-consistency) or training-based calibration with correctness annotations. While effective, achieving universal honesty alignment with training-based calibration requires costly, large-scale labeling. To support annotation-efficient training, we introduce Elicitation-Then-Calibration (EliCal), a two-stage framework that first elicits internal confidence using inexpensive self-consistency supervision, then calibrates this confidence with a small set of correctness annotations. To support a large-scale study, we release HonestyBench, a benchmark covering ten free-form QA datasets with 560k training and 70k evaluation instances annotated with correctness and self-consistency signals. Experiments show that EliCal achieves near-optimal alignment with only 1k correctness annotations (0.18% of full supervision) and better alignment performance on unseen MMLU tasks than the calibration-only baseline, offering a scalable solution toward universal honesty alignment in LLMs.

We present Open-MAGVIT2, a family of auto-regressive image generation models ranging from 300M to 1.5B. The Open-MAGVIT2 project produces an open-source replication of Google's MAGVIT-v2 tokenizer, a tokenizer with a super-large codebook (i.e., 2^{18} codes), and achieves the state-of-the-art reconstruction performance (1.17 rFID) on ImageNet 256 times 256. Furthermore, we explore its application in plain auto-regressive models and validate scalability properties. To assist auto-regressive models in predicting with a super-large vocabulary, we factorize it into two sub-vocabulary of different sizes by asymmetric token factorization, and further introduce "next sub-token prediction" to enhance sub-token interaction for better generation quality. We release all models and codes to foster innovation and creativity in the field of auto-regressive visual generation.

Intelligent document processing (IDP) with vision-language models (VLMs) hinges on confidence scores trustworthy enough to route extractions between automation and human review. Existing document benchmarks are dominated by clean, high-quality samples, leaving low accuracy regions too sparse for calibration assessment. We introduce ConfBench, the first calibration-specific benchmark for key information extraction (KIE), built by applying 20 controlled degradation pipelines to a diverse document set, yielding 1,346 variants and 70K+ entity-level evaluations spanning the full accuracy spectrum. We evaluate four proprietary and three open-weight VLMs under verbalized and log-probability confidence estimation methods across three input modalities, and find: (i) OCR+Image modality results in more accurate confidence estimates; (ii) model capability is the dominant factor: within the Claude family confidence quality scales monotonically with capability, while across families parameter count is a poor predictor; (iii) calibration quality varies widely across models, from near-perfect to severely overconfident, and per-model post-hoc correction rescales these absolute confidence values for threshold-based routing without altering ranking-based operational metrics; and (iv) log-probability with first-token aggregation consistently outperforms mean-token and margin aggregations. We also introduce ECARB, a review-budget metric translating discriminative gains into operational savings. We release ConfBench publicly to enable systematic study of confidence estimators and calibration methods for trustworthy IDP application deployment.

This paper introduces an all-neural text formatting (TF) model designed for commercial automatic speech recognition (ASR) systems, encompassing punctuation restoration (PR), truecasing, and inverse text normalization (ITN). Unlike traditional rule-based or hybrid approaches, this method leverages a two-stage neural architecture comprising a multi-objective token classifier and a sequence-to-sequence (seq2seq) model. This design minimizes computational costs and reduces hallucinations while ensuring flexibility and robustness across diverse linguistic entities and text domains. Developed as part of the Universal-2 ASR system, the proposed method demonstrates superior performance in TF accuracy, computational efficiency, and perceptual quality, as validated through comprehensive evaluations using both objective and subjective methods. This work underscores the importance of holistic TF models in enhancing ASR usability in practical settings.

As language models improve and become increasingly deployed to solve a variety of tasks, trustworthiness becomes essential. Calibration is a good proxy for trust: well-calibrated confidence estimates help inform the risk versus reward tradeoff when trusting a specific model output. Unfortunately, even as models improve, they remain poorly calibrated, often biasing towards overconfidence. Additionally, calibration can be gamed: a policy that always predicts the base rate is perfectly calibrated, but completely uninformative. To resolve this, we develop a new metric, expected utility renormalized by the oracle (EURO), that balances calibration and informativeness. We also propose a general-purpose activation-based confidence, utility, and trust estimation protocol (ACUTE) to appropriately adjudicate uncertainty. The ACUTE protocol provides flexible, sample-efficient, and compute-efficient confidence estimators for 3 tasks including multiple choice question answering, tool-calling, and scientific document summarization across 6 models from 4 model families. ACUTE outperforms strong baselines on EURO, while maintaining low calibration error. Taken together, our work shows that equipping LLMs with the ACUTE protocol can improve calibration, utility, and trustworthiness in numerous settings.

Machine unlearning aims to remove the influence of specific training data from a model while preserving reliable behavior on the remaining data, making reliable prediction and uncertainty estimation essential for evaluation. Calibration is commonly used as a proxy for reliability in language models, but low calibration error does not necessarily imply reliable decision rules, as models may rely on spurious correlations while remaining well calibrated. We investigate this gap in generative language models using the multiple-choice question-answering evaluation protocol on the TOFU benchmark, measuring probabilistic reliability with calibration metrics (ECE, MCE, Brier) and decision-rule reliability via attribution-based shortcut detection with Integrated Gradients and Local Mutual Information. We find that fine-tuned models achieve low calibration error (ECE ~ 0.04) compared to pretrained models (ECE > 0.5), and models after unlearning retain similarly low calibration despite reduced accuracy on the forget split, while attribution analysis shows increased reliance on correlation-based tokens. These results demonstrate that good calibration can coexist with shortcut-based decision rules after unlearning, extending the reliability paradox to the machine unlearning setting.

Recent breakthroughs in large language models (LLMs) have led to notable successes in complex reasoning tasks, such as mathematical problem solving. A common strategy for improving performance is parallel thinking, in which multiple reasoning traces are generated and the final prediction is made using aggregation schemes like majority voting or best-of-N decoding. However, two key challenges persist. First, multi-sample decoding incurs substantial inference latency, especially for long-form outputs. Second, effective mechanisms for reliably assessing the correctness of individual reasoning traces are still limited. To address these challenges, we introduce One-Token Verification (OTV), a computational method that estimates reasoning correctness in a single forward pass during generation. OTV is activated by a learnable token and integrated into the LLM via low-rank adaptation to probe internal reasoning signals through the key-value cache, supporting token-level correctness estimation at any stage of generation without disrupting primary reasoning. Experiments on mathematical reasoning benchmarks demonstrate that OTV consistently surpasses existing verifiers. Additionally, OTV reduces token usage by up to 90% through correctness-guided early termination, prioritizing shorter, more reliable solutions.

We present DeepSeek-OCR as an initial investigation into the feasibility of compressing long contexts via optical 2D mapping. DeepSeek-OCR consists of two components: DeepEncoder and DeepSeek3B-MoE-A570M as the decoder. Specifically, DeepEncoder serves as the core engine, designed to maintain low activations under high-resolution input while achieving high compression ratios to ensure an optimal and manageable number of vision tokens. Experiments show that when the number of text tokens is within 10 times that of vision tokens (i.e., a compression ratio < 10x), the model can achieve decoding (OCR) precision of 97%. Even at a compression ratio of 20x, the OCR accuracy still remains at about 60%. This shows considerable promise for research areas such as historical long-context compression and memory forgetting mechanisms in LLMs. Beyond this, DeepSeek-OCR also demonstrates high practical value. On OmniDocBench, it surpasses GOT-OCR2.0 (256 tokens/page) using only 100 vision tokens, and outperforms MinerU2.0 (6000+ tokens per page on average) while utilizing fewer than 800 vision tokens. In production, DeepSeek-OCR can generate training data for LLMs/VLMs at a scale of 200k+ pages per day (a single A100-40G). Codes and model weights are publicly accessible at http://github.com/deepseek-ai/DeepSeek-OCR.

A language model reads long text in one quadratic forward pass, stops at the context window, and loses accuracy with length before reaching it. We ask whether the read can be factorized when deciding over a finite set: which document is relevant, which option is supported, which passage is the evidence. Periscope, a training-free inference method, arranges the N chunks of a text on a K{times}K grid with K{=}lceilNrceil and asks a frozen model the same question about K local spans of consecutive chunks and K strided spans that sample the whole text, reading the log-odds of every answer at one token. Each answer takes its best local and strided score, and scoring every chunk by its two spans gives an evidence map at no further cost, whose peak is the chunk behind the answer. Every probe is about sc tokens for a text of s tokens and chunk size c, so a window of W tokens reaches W^{2}/c tokens at s^{1.5} cost. The map replaces the long read. On LongBench v2, reading only the K chunks the map ranks highest, 9k tokens, matches the same model's best window read across windows from 32k to 1M tokens, and on InfiniteBench, where the median context is 150k tokens, it leads the best window read by 5 points. The same map ranks BRIGHT's long-document corpora with the best NDCG@10 of six methods. Each call caches only one probe, so a 27B model reads 4.5M-token contexts on one 80GB GPU, where a single pass would need 296GB of cache. A long read then needs a GPU that holds the model, not one that holds the text.

Applications such as weather forecasting and personalized medicine demand models that output calibrated probability estimates---those representative of the true likelihood of a prediction. Most models are not calibrated out of the box but are recalibrated by post-processing model outputs. We find in this work that popular recalibration methods like Platt scaling and temperature scaling are (i) less calibrated than reported, and (ii) current techniques cannot estimate how miscalibrated they are. An alternative method, histogram binning, has measurable calibration error but is sample inefficient---it requires O(B/ε^2) samples, compared to O(1/ε^2) for scaling methods, where B is the number of distinct probabilities the model can output. To get the best of both worlds, we introduce the scaling-binning calibrator, which first fits a parametric function to reduce variance and then bins the function values to actually ensure calibration. This requires only O(1/ε^2 + B) samples. Next, we show that we can estimate a model's calibration error more accurately using an estimator from the meteorological community---or equivalently measure its calibration error with fewer samples (O(B) instead of O(B)). We validate our approach with multiclass calibration experiments on CIFAR-10 and ImageNet, where we obtain a 35% lower calibration error than histogram binning and, unlike scaling methods, guarantees on true calibration. In these experiments, we also estimate the calibration error and ECE more accurately than the commonly used plugin estimators. We implement all these methods in a Python library: https://pypi.org/project/uncertainty-calibration

As large language models gain widespread adoption, running them efficiently becomes crucial. Recent works on LLM inference use speculative decoding to achieve extreme speedups. However, most of these works implicitly design their algorithms for high-end datacenter hardware. In this work, we ask the opposite question: how fast can we run LLMs on consumer machines? Consumer GPUs can no longer fit the largest available models (50B+ parameters) and must offload them to RAM or SSD. When running with offloaded parameters, the inference engine can process batches of hundreds or thousands of tokens at the same time as just one token, making it a natural fit for speculative decoding. We propose SpecExec (Speculative Execution), a simple parallel decoding method that can generate up to 20 tokens per target model iteration for popular LLM families. It utilizes the high spikiness of the token probabilities distribution in modern LLMs and a high degree of alignment between model output probabilities. SpecExec takes the most probable tokens continuation from the draft model to build a "cache" tree for the target model, which then gets validated in a single pass. Using SpecExec, we demonstrate inference of 50B+ parameter LLMs on consumer GPUs with RAM offloading at 4-6 tokens per second with 4-bit quantization or 2-3 tokens per second with 16-bit weights.

Reasoning models have demonstrated impressive performance on difficult tasks that traditional language models struggle at. However, many are plagued with the problem of overthinking--generating large amounts of unnecessary tokens which don't improve accuracy on a question. We introduce approximate measures of problem-level difficulty and demonstrate that a clear relationship between problem difficulty and optimal token spend exists, and evaluate how well calibrated a variety of reasoning models are in terms of efficiently allocating the optimal token count. We find that in general, reasoning models are poorly calibrated, particularly on easy problems. To evaluate calibration on easy questions we introduce DUMB500, a dataset of extremely easy math, reasoning, code, and task problems, and jointly evaluate reasoning model on these simple examples and extremely difficult examples from existing frontier benchmarks on the same task domain. Finally, we introduce THOUGHTTERMINATOR, a training-free black box decoding technique that significantly improves reasoning model calibration.

While decoders have rapidly scaled, encoders have remained largely unchanged since BERT. We revisit this disparity by frozen backbone evaluation via probing. Under this lens, the representations of BERT encoders become increasingly unexploitable by frozen probes, despite improved perplexity. The misalignment originates in BERT's flat design, which couples representation learning to the token reconstruction loss. We propose CrossBERT, a two-part architecture that separates the learning of high-quality encoded representations from the rigid grounding of token reconstruction. This design further enables high masking ratios (ge 50%) and gradient collection over all tokens via a Complementary Masking Strategy, respectively increasing throughput by 1.5 to 2times and sample efficiency by 2times. Overall, CrossBERT demonstrates monotonic scaling and superior performance on MTEB(eng, v2) and frozen GLUE benchmarks.

Language models hold latent quantities in a form they can report on, and more of a quantity is present in that form when the task requires reusing it flexibly. What causes a representation to enter that form is open, and the word workspace invites an admission story: a gate that decides what gets in. Testing it on open-weight models with Jacobian lenses, over a benchmark whose five arms share an identical context, we find no gate where it predicts one. Demand raises a concept's lens visibility beyond what applying an operator to a supplied value produces: +0.050 [+0.045, +0.057] in percentile rank on our primary checkpoint, positive on all four we measure, though that arm answers at ceiling and the accuracymatched contrast is stronger under that readout. At the same time one shared linear map decodes the variable from every arm, the control included, at 6.4-9.0x its selection-corrected floor. What produces the later readable form at the queried position is attention-mediated gathering inside a mid-depth window: separating patch depth from readout depth puts transport there at least 17x above anywhere shallower under non-saturating readouts, with no tested MLP output contributing positively inside it. Under the saturating percentile rank the same grid does not localise the window, which is a fact about that measure. An arm that needs the variable for nothing concentrates sevenfold less, so the window is demand-specific. That window has two measured edges, a survival failure below and destruction above, and it falls at the same fractional depth in a 64-layer hybrid and a 62-layer dense model from another family. We localise where the variable is installed and read, not the route from the passage, which transports nothing. But the readout is not a calibrated measure of use: three components move it to within 12% of one another and differ 7.4x in what they do to the answer.

Test-time adaptive out-of-distribution (OOD) detectors update a memory bank from the unlabelled stream. We show this adaptation obeys a provable dynamical law. Modelling bank impurity as a generalized Pólya urn, we prove almost-sure convergence to a mean-field equilibrium whose slope acts as a reproduction number. Below one, impurity stays benign. Above one, the bank is fully poisoned and the detector collapses. The measured admission kernel is affine (R^2 ge 0.996) with slope just below one in every encoder family (a protocol signature), so this detector class is near-critical by design, and across 96 settings the predicted threshold matches the empirical collapse, where ungated dictionaries lose up to 0.163 AUROC. We then prove that a certified admission gate, reading only a frozen reserve, severs the feedback loop and removes the transition at every contamination rate, even adversarially, while controlling false positives label-free. For the complementary static-calibration failure under drift we give CDC, which restores nominal FPR label-free on all tested drift-affected cells. Finally we prove a two-world impossibility theorem. Drift and contamination are indistinguishable without labels, forcing a closed-form power ceiling our procedure approaches. Together these give a complete possibility/impossibility characterization of label-free adaptive OOD detection.

Large Language Models (LLMs) have exhibited remarkable performance on reasoning tasks. They utilize autoregressive token generation to construct reasoning trajectories, enabling the development of a coherent chain of thought. In this work, we explore the impact of individual tokens on the final outcomes of reasoning tasks. We identify the existence of ``critical tokens'' that lead to incorrect reasoning trajectories in LLMs. Specifically, we find that LLMs tend to produce positive outcomes when forced to decode other tokens instead of critical tokens. Motivated by this observation, we propose a novel approach - cDPO - designed to automatically recognize and conduct token-level rewards for the critical tokens during the alignment process. Specifically, we develop a contrastive estimation approach to automatically identify critical tokens. It is achieved by comparing the generation likelihood of positive and negative models. To achieve this, we separately fine-tune the positive and negative models on various reasoning trajectories, consequently, they are capable of identifying identify critical tokens within incorrect trajectories that contribute to erroneous outcomes. Moreover, to further align the model with the critical token information during the alignment process, we extend the conventional DPO algorithms to token-level DPO and utilize the differential likelihood from the aforementioned positive and negative model as important weight for token-level DPO learning.Experimental results on GSM8K and MATH500 benchmarks with two-widely used models Llama-3 (8B and 70B) and deepseek-math (7B) demonstrate the effectiveness of the propsoed approach cDPO.

Speech-to-IPA transcription is useful when the desired output is pronunciation rather than orthographic text, but competitive multilingual systems are often large and evaluation is sensitive to normalization choices. This paper presents BranchShine, a 33M-parameter raw-audio CTC recognizer with a lightweight convolutional front end and a 19-block RoPE E-Branchformer encoder. We find that BranchShine provides a compact and competitive operating point for IPA transcription under matched normalization and scoring. On a 16,660-utterance multilingual test set covering 41 language labels, BranchShine obtains 9.19% whitespace-insensitive IPA character error rate, compared with 9.78% for the 575.00M-parameter PhoneticXEUS baseline. A secondary child speech reading analysis shows a complementary operating profile: BranchShine is more conservative on incorrect readings, while Whisper-Medium is stronger on exact acceptance of correct readings. Overall, the results indicate that a compact raw-audio-to-IPA model can approach much larger baselines on character-level IPA transcription.

In this paper, we uncover a systematic bias in the evaluation paradigm of adopting large language models~(LLMs), e.g., GPT-4, as a referee to score and compare the quality of responses generated by candidate models. We find that the quality ranking of candidate responses can be easily hacked by simply altering their order of appearance in the context. This manipulation allows us to skew the evaluation result, making one model appear considerably superior to the other, e.g., Vicuna-13B could beat ChatGPT on 66 over 80 tested queries with ChatGPT as an evaluator. To address this issue, we propose a calibration framework with three simple yet effective strategies: 1) Multiple Evidence Calibration, which requires the evaluator model to generate multiple evaluation evidence before assigning ratings; 2) Balanced Position Calibration, which aggregates results across various orders to determine the final score; 3) Human-in-the-Loop Calibration, which introduces a balanced position diversity entropy to measure the difficulty of each example and seeks human assistance when needed. We also manually annotate the "win/tie/lose" outcomes of responses from ChatGPT and Vicuna-13B in the Vicuna Benchmark's question prompt, and extensive experiments demonstrate that our approach successfully mitigates evaluation bias, resulting in closer alignment with human judgments. We release our code and human annotation at https://github.com/i-Eval/FairEval to facilitate future research.

Conformal prediction guarantees marginal coverage, but a single calibration threshold can still spread that coverage unevenly, over-covering easy regions and under-covering hard ones. SimplexUQ is, to our knowledge, the first benchmark and reproducible protocol for measuring this allocation problem on simplex-valued predictions; it compares existing conformal wrappers rather than proposing a new one. Its task suite, SimplexTasks-12, combines six controlled synthetic regimes with six frozen-predictor real tasks spanning class probabilities, topic mixtures, spectral abundances, cell-type fractions, age distributions, and emotion mixtures. Each comparison fixes the predictor, score, and response-free stratification map, varies only the wrapper, and reports marginal coverage, worst-stratum coverage, max disparity, and within-task radius and compute. Global calibration can look valid while failing badly: on CIFAR-10 it attains 0.900 marginal coverage but only 0.542 in the worst entropy stratum, and Mondrian calibration raises that stratum to 0.886 while reducing max disparity from 0.358 to 0.022. No wrapper dominates, however. Under smooth synthetic heterogeneity, several repairs are competitive; fixed-map analyses show that rankings depend on the evaluation groups and protocol; and in a 12-task comparison, Mondrian has lower disparity on its single target partition for all 12 tasks, whereas BatchMVP has lower disparity over overlapping groups on five. These are empirical comparisons, not new coverage guarantees. A controlled predictor-bias sweep shows that removing predictor bias only partly reduces global-threshold disparity. We release task cards, result provenance, permitted derived arrays, and rebuild instructions, and treat wrapper selection as a diagnostic comparison rather than a universal ranking.

Existing video language models encode sampled RGB frames independently, so a long video must either exhaust the token budget or drop the changes between sampled frames. Codec-aware front-ends read the motion vectors and residuals that encoding produced, but in their deployed form each predictive frame is still tokenized on its own: the tokens are a function of the current primitives, not of a carried reference. We argue that a more natural function is of both---the current primitives and a carried reference. A clip and its time reversal share the same frames and differ only in the order of changes---an axis that symmetric pooling discards by construction, and that is non-empty in the frozen vision features VideoLMs use---and the codec recurrence already composes those changes in order against a reference state. We introduce RESUME, a stateful codec representation: an anchor I-frame initializes a compact latent state, each subsequent predictive frame is consumed as an update to that state, and a shared readout exposes VideoLM-compatible tokens from the accumulated state. Codec prediction is thereby kept at the representation level and handed to the language model as a trajectory, not as a set of independent token groups. At the same per-predictive-frame token budget as prior codec-aware methods, a predictive frame enters the language model as a readout of what the front-end already knows, not as an encoding of the current primitives alone. Across ten benchmarks, the gains concentrate on temporal reasoning: on all three temporal benchmarks RESUME improves over both the RGB-frame baseline LLaVA-Video-7B (by 2.8, 5.1, and 3.9 points on TempCompass, TOMATO, and MVBench) and the codec-based baseline CoPE-7B, while staying competitive on general and long-form QA. Frozen-transition tests further show anchor dependence, order sensitivity, and useful rollout behavior beyond the training horizon.

Large Language Models (LLMs) achieve competitive performance across diverse natural language processing (NLP) tasks, yet pretraining is computationally demanding, making optimizer efficiency an important practical consideration. Muon accelerates LLM pretraining via orthogonal momentum updates that serve as a matrix analogue of the element-wise sign operator. Motivated by the recent perspective that Adam is a variance-adaptive sign update algorithm, we propose two variants of Muon, Muon-NSR and Muon-VS, which apply variance-adaptive normalization to momentum before orthogonalization. Muon-NSR applies noise-to-signal ratio (NSR) modulation, while Muon-VS performs variance-based scaling without introducing additional hyperparameters. Experiments on GPT-2 and LLaMA pretraining demonstrate that our proposed methods accelerate convergence and consistently achieve lower validation loss than both competitive, well-tuned AdamW and Muon baselines. For example, on the LLaMA-1.2B model, Muon-NSR and Muon-VS reduce the iterations required to reach the target validation loss by 1.36times relative to the well-tuned Muon following the recent benchmark.

Transformer-based large language models (LLMs) exhibit limitations such as generating unsafe responses, unreliable reasoning, etc. Existing inference intervention approaches attempt to mitigate these issues by finetuning additional models to produce calibration signals (such as rewards) that guide the LLM's decoding process. However, this solution introduces substantial time and space overhead due to the separate models required. This work proposes Non-disruptive parameters insertion (Otter), inserting extra parameters into the transformer architecture to predict calibration signals along with the original LLM output. Otter offers state-of-the-art performance on multiple demanding tasks while saving up to 86.5\% extra space and 98.5\% extra time. Furthermore, Otter seamlessly integrates with existing inference engines, requiring only a one-line code change, and the original model response remains accessible after the parameter insertion. Our code is publicly available at https://github.com/chenhan97/Otter

Crash datasets that carry an investigator narrative hold information the coded fields omit. Coding those narratives at scale has been blocked by three obstacles. Frontier large language models are costly at that scale, their generated text cannot be verified, and no rule says how much output a human must check. This paper formulates narrative coding as gated, typed decisions answered by Jev, a System One model that returns probabilities over analyst-defined options and generates no text. A screen covered 499,500 Texas narratives and 195,857 were coded with a 27-question schema. Cost is governed by schema size rather than narrative length. The probabilities are audited against coded fields and against 2,416 blinded human judgments drawn under a stated sampling design. Two frontier large language models are benchmarked on the same records. Against human labels the typed model attains an F1 of 0.908. One frontier model gains 0.059 and the other is indistinguishable from it. Calibration varies by model rather than by paradigm, so each model must be audited. Recalibration on the same labels reduces calibration error by a factor of 3.3. Agreement with coded fields understates fidelity to the narrative by a median of 0.26 in kappa. A resolution-floor bound covers any model that reports probabilities on a discrete grid. A review budget over flagged records gives the records a human must read per variable and per year. Adding the calibrated variables to the coded fields raises the injury and fatal crashes attributed to nine factors by 10,747 per year.

AI-text detection generally asks whether a machine wrote a text. As AI becomes an increasingly integral and accepted part of writing, the more relevant question is no longer whether AI was used, but how much of the text reflects human contribution. A prominent line of work estimates this by measuring how predictive a person's prompt is of the final text. We show that this measure can be easily manipulated. We introduce SPECIFICITY PADDING that simply asks the model to copy a few random IDs from the prompt, and that alone makes a title-only request look more human than one that supplies the article's key ideas. A context-swap audit then holds each document fixed, and only shows or hides the IDs to the evaluator. The score of the unchanged text swings by a third to half of its scale, and it rises for every document we test, on news and scientific abstracts, across varied LLMs from 3.8B to 753B parameters. The same articles can average 85\% human or 15\% human depending only on which prompt is on record, and even with no prompt at all, the output-only variant rewards the random strings themselves. An exact identity, the credit ledger, explains why. The score is a surprisal-weighted average over the text, so rare strings that the context makes copyable collect the credit, whatever they mean. A two-point bound marks a deeper limit. If the prompt could have been machine-written, every transcript-only method must, in the worst case, miss by half the contribution at stake. Likelihood-based scores alone cannot reliably establish human contribution without evidence of what the person added and how the text was produced.

We present an approach to pose object recognition as next token prediction. The idea is to apply a language decoder that auto-regressively predicts the text tokens from image embeddings to form labels. To ground this prediction process in auto-regression, we customize a non-causal attention mask for the decoder, incorporating two key features: modeling tokens from different labels to be independent, and treating image tokens as a prefix. This masking mechanism inspires an efficient method - one-shot sampling - to simultaneously sample tokens of multiple labels in parallel and rank generated labels by their probabilities during inference. To further enhance the efficiency, we propose a simple strategy to construct a compact decoder by simply discarding the intermediate blocks of a pretrained language model. This approach yields a decoder that matches the full model's performance while being notably more efficient. The code is available at https://github.com/kaiyuyue/nxtp

LLMs have traditionally scaled along dense dimensions, where performance is coupled with near-linear increases in computational cost. While MoE decouples capacity from compute, it introduces large memory overhead and hardware efficiency challenges. To overcome these, we propose token-indexed parameters as a novel, orthogonal scaling axis that decouple model capacity from FLOPs. Specifically, we introduce Joint-Token (JTok) and Mixture of Joint-Token (JTok-M), which augment Transformer layers with modulation vectors retrieved from auxiliary embedding tables. These vectors modulate the backbone via lightweight, element-wise operations, incurring negligible FLOPs overhead. Extensive experiments on both dense and MoE backbones, spanning from 650M (190M + 460M embedding) to 61B (17B + 44B embedding) total parameters, demonstrate that our approach consistently reduces validation loss and significantly improves downstream task performance (e.g., +4.1 on MMLU, +8.3 on ARC, +8.9 on CEval). Rigorous isoFLOPs analysis further confirms that JTok-M fundamentally shifts the quality-compute Pareto frontier, achieving comparable model quality with 35% less compute relative to vanilla MoE architectures, and we validate that token-indexed parameters exhibit a predictable power-law scaling behavior. Moreover, our efficient implementation ensures that the overhead introduced by JTok and JTok-M remains marginal.

Low-precision Transformer systems increasingly quantize attention matrix multiplications, while softmax often remains at higher precision. During pretraining, an approximate softmax changes the gradients that train the model as well as its forward computation. We study this interaction with K-interval attention, which approximates the exponential using K+1 grid values. We vary per-row grid calibration, interpolation versus hard rounding, and the placement of a straight-through surrogate relative to normalization. We derive the corresponding backward rules, including calibration derivatives, and compare these choices in pretraining experiments matched on model, data, and optimizer. Detaching the row extrema leaves the forward computation unchanged but produces a delayed increase in validation loss. With hard rounding at K=4, min-max calibration and a pre-normalization surrogate incur a large loss gap; changing either choice substantially reduces it. At 124M parameters and 2.5B training tokens, fixed-window calibration with a post-normalization surrogate yields a validation loss gap of +0.019 nats relative to softmax at K=4, and with a pre-normalization surrogate yields +0.004 nats at K=16.

Neural NLP models are often miscalibrated, assigning high confidence to incorrect predictions, which undermines selective prediction and high-stakes deployment. Post-hoc calibration methods adjust output probabilities but leave internal computation unchanged, while ensemble and Bayesian approaches improve uncertainty at substantial training or storage cost. We propose UAT-LITE, an inference-time framework that makes self-attention uncertainty-aware using approximate Bayesian inference via Monte Carlo dropout in pretrained transformer classifiers. Token-level epistemic uncertainty is estimated from stochastic forward passes and used to modulate self-attention during contextualization, without modifying pretrained weights or training objectives. We additionally introduce a layerwise variance decomposition to diagnose how predictive uncertainty accumulates across transformer depth. Across the SQuAD 2.0 answerability, MNLI, and SST-2, UAT-LITE reduces Expected Calibration Error by approximately 20% on average relative to a fine-tuned BERT-base baseline while preserving task accuracy, and improves selective prediction and robustness under distribution shift.

Financial institutions deploy Large Language Models (LLMs) for reconciliations, regulatory reporting, and client communications, but nondeterministic outputs (output drift) undermine auditability and trust. We quantify drift across five model architectures (7B-120B parameters) on regulated financial tasks, revealing a stark inverse relationship: smaller models (Granite-3-8B, Qwen2.5-7B) achieve 100% output consistency at T=0.0, while GPT-OSS-120B exhibits only 12.5% consistency (95% CI: 3.5-36.0%) regardless of configuration (p<0.0001, Fisher's exact test). This finding challenges conventional assumptions that larger models are universally superior for production deployment. Our contributions include: (i) a finance-calibrated deterministic test harness combining greedy decoding (T=0.0), fixed seeds, and SEC 10-K structure-aware retrieval ordering; (ii) task-specific invariant checking for RAG, JSON, and SQL outputs using finance-calibrated materiality thresholds (plus or minus 5%) and SEC citation validation; (iii) a three-tier model classification system enabling risk-appropriate deployment decisions; and (iv) an audit-ready attestation system with dual-provider validation. We evaluated five models (Qwen2.5-7B via Ollama, Granite-3-8B via IBM watsonx.ai, Llama-3.3-70B, Mistral-Medium-2505, and GPT-OSS-120B) across three regulated financial tasks. Across 480 runs (n=16 per condition), structured tasks (SQL) remain stable even at T=0.2, while RAG tasks show drift (25-75%), revealing task-dependent sensitivity. Cross-provider validation confirms deterministic behavior transfers between local and cloud deployments. We map our framework to Financial Stability Board (FSB), Bank for International Settlements (BIS), and Commodity Futures Trading Commission (CFTC) requirements, demonstrating practical pathways for compliance-ready AI deployments.

Pre-trained Transformers are now ubiquitous in natural language processing, but despite their high end-task performance, little is known empirically about whether they are calibrated. Specifically, do these models' posterior probabilities provide an accurate empirical measure of how likely the model is to be correct on a given example? We focus on BERT and RoBERTa in this work, and analyze their calibration across three tasks: natural language inference, paraphrase detection, and commonsense reasoning. For each task, we consider in-domain as well as challenging out-of-domain settings, where models face more examples they should be uncertain about. We show that: (1) when used out-of-the-box, pre-trained models are calibrated in-domain, and compared to baselines, their calibration error out-of-domain can be as much as 3.5x lower; (2) temperature scaling is effective at further reducing calibration error in-domain, and using label smoothing to deliberately increase empirical uncertainty helps calibrate posteriors out-of-domain.

The differing representation spaces required for visual understanding and generation pose a challenge in unifying them within the autoregressive paradigm of large language models. A vision tokenizer trained for reconstruction excels at capturing low-level perceptual details, making it well-suited for visual generation but lacking high-level semantic representations for understanding tasks. Conversely, a vision encoder trained via contrastive learning aligns well with language but struggles to decode back into the pixel space for generation tasks. To bridge this gap, we propose DualToken, a method that unifies representations for both understanding and generation within a single tokenizer. However, directly integrating reconstruction and semantic objectives in a single tokenizer creates conflicts, leading to degraded performance in both reconstruction quality and semantic performance. Instead of forcing a single codebook to handle both semantic and perceptual information, DualToken disentangles them by introducing separate codebooks for high and low-level features, effectively transforming their inherent conflict into a synergistic relationship. As a result, DualToken achieves state-of-the-art performance in both reconstruction and semantic tasks while demonstrating remarkable effectiveness in downstream MLLM understanding and generation tasks. Notably, we also show that DualToken, as a unified tokenizer, surpasses the naive combination of two distinct types vision encoders, providing superior performance within a unified MLLM.

Prior work has shown that instruction-tuned large language models (LLMs) are less well calibrated than their base pre-trained counterparts. However, little is known about the frequently used chat template's effect on the calibration of conversational LLMs. In this work, we investigate the mechanisms driving this miscalibration by decoupling the effects of the post-training algorithm and the chat format. We find that, while instruction tuning fundamentally harms calibration, the chat template aggravates the issue through an "ownership bias" -- models are significantly more confident in their own answers than in identical answers provided by a user. Extensive experiments across six recent open-weight LLMs, three benchmarks, and three confidence elicitation methods show that models assign up to 26% higher confidence to their own responses. Leveraging this insight, we propose a simple inference-time strategy: framing the model's answer as user input during confidence elicitation. This approach significantly reduces overconfidence and improves calibration by up to 26% without the need for retraining, narrowing the gap between base and instruction-tuned models.

System One models output calibrated probabilities over typed answers such as categorical choices, ordinal levels, or binary outcomes, via a non-generative interface. Software can act on these probabilities through thresholds, cost-weighted choices, and escalation rules. Consequently, if these probabilities are miscalibrated or wording-sensitive, the software ma take unintended actions leaving human operators with no textual rationale to inspect. Current evaluations largely report accuracy and calibration on public classification datasets without a clear reference. We present TypedBench, a benchmark for typed decision models like Jev built from seven policy-labelled generators and nine evaluation suites. We report accuracy as median and range across paraphrases, and calibration error relative to the finite-sample noise floor of a matched, perfectly calibrated predictor. We assess probability quality through selective prediction, ordinal proper scoring rules, and realised cost under asymmetric cost matrices. We evaluate a hosted model, an open encoder, and a family of open decoders spanning 0.8B-9B parameters on identical items. The hosted model follows the stated policy but is wording-sensitive and systematically underconfident; under asymmetric costs, using its probabilities can be worse than taking its top answer. Decoders route exactly and are slow as options or questions are added. The decoder is least accurate on policy questions and degrades with more options. Overall, typed decision models must be evaluated jointly on policy adherence, wording robustness, probability quality, and induced decision outcomes.

One of the most striking findings in modern research on large language models (LLMs) is that scaling up compute during training leads to better results. However, less attention has been given to the benefits of scaling compute during inference. This survey focuses on these inference-time approaches. We explore three areas under a unified mathematical formalism: token-level generation algorithms, meta-generation algorithms, and efficient generation. Token-level generation algorithms, often called decoding algorithms, operate by sampling a single token at a time or constructing a token-level search space and then selecting an output. These methods typically assume access to a language model's logits, next-token distributions, or probability scores. Meta-generation algorithms work on partial or full sequences, incorporating domain knowledge, enabling backtracking, and integrating external information. Efficient generation methods aim to reduce token costs and improve the speed of generation. Our survey unifies perspectives from three research communities: traditional natural language processing, modern LLMs, and machine learning systems.

Autoregressive (AR) modeling, known for its next-token prediction paradigm, underpins state-of-the-art language and visual generative models. Traditionally, a ``token'' is treated as the smallest prediction unit, often a discrete symbol in language or a quantized patch in vision. However, the optimal token definition for 2D image structures remains an open question. Moreover, AR models suffer from exposure bias, where teacher forcing during training leads to error accumulation at inference. In this paper, we propose xAR, a generalized AR framework that extends the notion of a token to an entity X, which can represent an individual patch token, a cell (a ktimes k grouping of neighboring patches), a subsample (a non-local grouping of distant patches), a scale (coarse-to-fine resolution), or even a whole image. Additionally, we reformulate discrete token classification as continuous entity regression, leveraging flow-matching methods at each AR step. This approach conditions training on noisy entities instead of ground truth tokens, leading to Noisy Context Learning, which effectively alleviates exposure bias. As a result, xAR offers two key advantages: (1) it enables flexible prediction units that capture different contextual granularity and spatial structures, and (2) it mitigates exposure bias by avoiding reliance on teacher forcing. On ImageNet-256 generation benchmark, our base model, xAR-B (172M), outperforms DiT-XL/SiT-XL (675M) while achieving 20times faster inference. Meanwhile, xAR-H sets a new state-of-the-art with an FID of 1.24, running 2.2times faster than the previous best-performing model without relying on vision foundation modules (\eg, DINOv2) or advanced guidance interval sampling.

Large language models (LLMs) offer powerful capabilities but incur substantial computational costs, driving the need for efficient compression techniques. This study evaluates the impact of popular compression methods - Magnitude Pruning, SparseGPT, and Wanda - on the LLaMA-2-7B model, focusing on the trade-offs between model size reduction, downstream task performance, and the role of calibration data. Our findings reveal that while SparseGPT and Wanda preserve perplexity even at 50% sparsity, they suffer significant degradation on downstream tasks, highlighting the inadequacy of perplexity as the sole evaluation metric. To address this, we introduce Jensen-Shannon (JS) Divergence as a more comprehensive metric that captures nuanced changes in model behavior post-compression. We further demonstrate that task-specific calibration data significantly enhances the downstream performance of compressed models compared to general calibration data. This research underscores the necessity for diverse evaluation metrics and careful calibration data selection to fully understand the complexities of LLM compression and its implications for practical applications.

Historical Arabic manuscript transcription is not only a recognition problem. A usable scholarly system must cope with shifting hands and layouts, preserve uncertain readings, distinguish visual evidence from linguistic plausibility, and record the researcher's final decision. We present Phoenix, a 4.99-million-parameter CNN-BiLSTM-CTC recognizer, and Athar, an evidence-aware review workflow built around it. Phoenix is adapted across archival, Maghrebi, and historical manuscript domains using document-aware replay, an expanded 81-symbol codec, and forgetting guards that reject checkpoints that improve a new domain at unacceptable cost to previous domains. In a pre-specified held-out comparison against the preceding checkpoint, frozen before evaluation and scored with greedy decoding and raw references, Phoenix reduced CER from 22.12% to 17.86% on 10,594 Agapet lines and from 17.72% to 11.84% on 11,684 Omar lines, while regressing from 10.39% to 10.72% on 164 TariMa lines. Across the two large held-out sets, character-weighted CER fell from 19.98% to 14.93%, a 25.3% relative error reduction. A separate same-protocol development diagnostic found the lowest CER for Phoenix on four of four comparable domains (9.59% unweighted macro CER). An N-best diagnostic revealed a 2.15-point oracle gap between beam decoding and Oracle@25, while neural text rerankers, consensus MBR, CTC-posterior quality estimation, and local pre-CTC hidden-state quality estimation recovered less than 4% of this gap. Athar therefore preserves the visual reading, exposes bounded alternatives, uses local language models conservatively, retrieves source parallels with unique, ambiguous, or abstain states, and exports auditable TEI and PAGE-XML records. The results support evaluating manuscript HTR as auditable evidence management rather than silent text replacement.

Large language models often fail at simple counting tasks, even when the items to count are explicitly present in the prompt. We investigate whether this failure occurs because transformers do not represent counts internally, or because they cannot convert those representations into the correct output tokens. Across three model families, Pythia, Qwen3, and Mistral, ranging from 0.4B to 14B parameters, we find strong evidence for the second explanation. Linear probes recover the correct count from intermediate layers with near-perfect accuracy (R^2>0.99), showing that the information is present. However, the internal directions that encode counts are nearly orthogonal to the output-head rows for digit tokens (|cos|leq0.032). In other words, the model stores the count in a form that the digit logits do not naturally read out. We localize this failure with two interventions. Updating only the digit rows of the output head (36,864 parameters) substantially improves constrained next-token digit prediction (60.7 to 100.0% across four tasks), but it does not fix autoregressive generation. By contrast, a small LoRA intervention on attention Q/V weights (7.67M parameters) improves upstream routing and achieves 83.1% +/- 7.2% in true greedy autoregressive generation. Logit-lens measurements confirm the mechanism: the correct digit's vocabulary rank drops from 55,980 to 1, a 50,000x improvement. Additional norm, logit-lens, and cross-task analyses show that the bottleneck generalizes across character counting, addition, and list length, while remaining absent from broader multi-step reasoning benchmarks, including MMLU, GSM8K, and DROP. These results identify counting failure as a geometric readout bottleneck rather than a failure of internal representation: the model knows the count but the output pathway is geometrically misaligned with the tokens needed to express it.

This paper presents MathBode, a dynamic diagnostic for mathematical reasoning in large language models (LLMs). Instead of one-shot accuracy, MathBode treats each parametric problem as a system: we drive a single parameter sinusoidally and fit first-harmonic responses of model outputs and exact solutions. This yields interpretable, frequency-resolved metrics -- gain (amplitude tracking) and phase (lag) -- that form Bode-style fingerprints. Across five closed-form families (linear solve, ratio/saturation, compound interest, 2x2 linear systems, similar triangles), the diagnostic surfaces systematic low-pass behavior and growing phase lag that accuracy alone obscures. We compare several models against a symbolic baseline that calibrates the instrument (G approx 1, phi approx 0). Results separate frontier from mid-tier models on dynamics, providing a compact, reproducible protocol that complements standard benchmarks with actionable measurements of reasoning fidelity and consistency. We open-source the dataset and code to enable further research and adoption.

We address the problem of uncertainty calibration and introduce a novel calibration method, Parametrized Temperature Scaling (PTS). Standard deep neural networks typically yield uncalibrated predictions, which can be transformed into calibrated confidence scores using post-hoc calibration methods. In this contribution, we demonstrate that the performance of accuracy-preserving state-of-the-art post-hoc calibrators is limited by their intrinsic expressive power. We generalize temperature scaling by computing prediction-specific temperatures, parameterized by a neural network. We show with extensive experiments that our novel accuracy-preserving approach consistently outperforms existing algorithms across a large number of model architectures, datasets and metrics.