Daily Papers

Post-training quantization (PTQ) enables efficient deployment of large language models by mapping pretrained weights to low-bit formats without retraining, typically using a small calibration set to minimize a layer-wise calibration objective. However, this sequential procedure induces a mismatch: errors from earlier quantized layers alter the inputs received by later layers, causing the activations to deviate from those of the full-precision model. Recent approaches introduce mismatch-aware calibration objectives to compensate for this effect, but leave open how much of the observed mismatch should shift each layer's calibration target. Fully applying this correction can overfit limited calibration data, while scaling the mismatch correction with a fixed coefficient ignores varying reliability of mismatch estimates across layers. To address these limitations, we propose CoreQ, a learning-free PTQ framework that applies a closed-form coefficient for mismatch correction derived from a geometric decomposition of the mismatch. The resulting coefficient adapts the correction across layers, reduces overfitting to finite calibration data, and requires no hyperparameter tuning. Given the corrected target, CoreQ minimizes the induced triangular least-squares objective with an efficient greedy successive-rounding solver and a bounded beam-search extension, K-CoreQ, that trades modest additional compute for improved performance. Across multiple LLM families, scales, bit-widths, and quantization settings, CoreQ improves perplexity and downstream accuracy over strong PTQ baselines.

This paper presents the High Frequency Instrument (HFI) data processing procedures for the Planck 2018 release. Major improvements in mapmaking have been achieved since the previous 2015 release. They enabled the first significant measurement of the reionization optical depth parameter using HFI data. This paper presents an extensive analysis of systematic effects, including the use of simulations to facilitate their removal and characterize the residuals. The polarized data, which presented a number of known problems in the 2015 Planck release, are very significantly improved. Calibration, based on the CMB dipole, is now extremely accurate and in the frequency range 100 to 353 GHz reduces intensity-to-polarization leakage caused by calibration mismatch. The Solar dipole direction has been determined in the three lowest HFI frequency channels to within one arc minute, and its amplitude has an absolute uncertainty smaller than 0.35μK, an accuracy of order 10^{-4}. This is a major legacy from the HFI for future CMB experiments. The removal of bandpass leakage has been improved by extracting the bandpass-mismatch coefficients for each detector as part of the mapmaking process; these values in turn improve the intensity maps. This is a major change in the philosophy of "frequency maps", which are now computed from single detector data, all adjusted to the same average bandpass response for the main foregrounds. Simulations reproduce very well the relative gain calibration of detectors, as well as drifts within a frequency induced by the residuals of the main systematic effect. Using these simulations, we measure and correct the small frequency calibration bias induced by this systematic effect at the 10^{-4} level. There is no detectable sign of a residual calibration bias between the first and second acoustic peaks in the CMB channels, at the 10^{-3} level.

Autonomous driving perception systems must maintain reliable object detection under diverse environmental conditions, not only in clear daytime scenes. However, the cross-weather robustness of modern detectors remains insufficiently characterised under source-only evaluation. This study evaluates representative object detection architectures trained exclusively on clear daytime driving scenes and tested without adaptation under unseen fog, rain, snow, and night conditions. The evaluation covers lightweight and medium-scale one-stage, two-stage, and transformer-based detectors within a unified protocol. Robustness is assessed using performance Drop (%), a Weather Robustness Index (WRI), and class-level sensitivity analysis for critical road participants, including cars, buses, trucks, and persons. Prediction confidence reliability under environmental domain shift is measured using Expected Calibration Error (ECE). Results reveal consistent performance degradation in adverse conditions, reaching 62.90% at night. Buses show the highest sensitivity to environmental variability, while cars remain comparatively stable across weather transitions. Comparisons indicate that YOLO-based detectors exhibit the lowest calibration mismatch, reflecting stronger agreement between predicted confidence and empirical detection correctness. In contrast, DETR achieves the lowest robustness score, with a WRI of 0.6859, indicating greater vulnerability to cross-weather domain shift. These findings offer deployment-oriented insights into detector robustness and confidence reliability for safety-critical intelligent vehicle perception systems.

Industrial anomaly detection (IAD) requires identifying fine-grained deviations from normal visual patterns. Multimodal large language models (MLLMs) can improve recognition accuracy by comparing query images with references at inference time, but these benefits rely on additional retrieval and processing. We investigate whether the benefits of reference comparison can instead be internalized in the model parameters. Access to references during training allows a reference-aware teacher to supervise a query-only student. However, the teacher may favor plausible responses based on query cues or language priors rather than valid visual information. We propose ADOPD, a reference-privileged on-policy distillation framework. The teacher evaluates student-generated rollouts under matched and mismatched references. The matched-reference teacher-to-student log-ratio defines the token-level learning direction, specifying what the student should learn. The likelihood gap between the two reference views estimates reference-specific support and calibrates the sequence-level weight. ADOPD achieves 77.31% average accuracy on the MMAD benchmark under zero-shot inference, improving the Qwen3-VL-4B backbone by 6.14 points and outperforming its one-shot setting by 2.64 points. Experiments show that ADOPD learns a fine-grained anomaly inspection strategy from reference comparison. The project will be available at https://github.com/withTai/ADOPD.

Reliable confidence estimates are essential in semantic segmentation, especially in safety-critical settings where overconfident errors can mislead downstream decisions. Yet modern segmentation models often remain miscalibrated. Post-hoc calibration offers a practical way to correct confidence estimates without retraining the segmentation model, but its use in dense prediction raises structural issues that are often overlooked. We study two such issues. First, adding a constant to all logits leaves the softmax probabilities unchanged, but several standard calibrators can still depend on this arbitrary offset. As a result, two logit representations encoding the same predictive distribution may yield different calibrated probabilities. We define translation-invariant (TI) calibrators as those whose outputs are unchanged under such shifts, characterize which common calibrators satisfy this property, and construct TI counterparts of shift-sensitive calibrators to isolate the effect of removing representation dependence. Second, post-hoc calibration is typically fitted by minimizing a likelihood-based objective, whereas segmentation models are trained with task-specific metrics such as Dice. This mismatch can cause calibration to alter class orderings and degrade the deployed segmentation map. We study decision-preserving calibration under argmax- and order-preservation constraints. Since enforcing these constraints collapses affine softmax calibrators to temperature scaling, we introduce class-conditional affine calibrators that can be made argmax- or order-preserving while retaining greater expressivity, allowing us to quantify the calibration-segmentation trade-off induced by decision preservation. Across natural-image and medical segmentation benchmarks, and under corruption-based covariate shift, matched comparisons show that TI variants generally improve calibration metrics, while decision-preserving variants prevent segmentation degradation and retain strong calibration performance. These results provide practical design principles for well-defined post-hoc calibration pipelines in semantic segmentation.

Large Vision Language Models (LVLMs) achieve strong multimodal reasoning but frequently exhibit hallucinations and incorrect responses with high certainty, which hinders their usage in high-stakes domains. Existing verbalized confidence calibration methods, largely developed for text-only LLMs, typically optimize a single holistic confidence score using binary answer-level correctness. This design is mismatched to LVLMs: an incorrect prediction may arise from perceptual failures or from reasoning errors given correct perception, and a single confidence conflates these sources while visual uncertainty is often dominated by language priors. To address these issues, we propose VL-Calibration, a reinforcement learning framework that explicitly decouples confidence into visual and reasoning confidence. To supervise visual confidence without ground-truth perception labels, we introduce an intrinsic visual certainty estimation that combines (i) visual grounding measured by KL-divergence under image perturbations and (ii) internal certainty measured by token entropy. We further propose token-level advantage reweighting to focus optimization on tokens based on visual certainty, suppressing ungrounded hallucinations while preserving valid perception. Experiments on thirteen benchmarks show that VL-Calibration effectively improves calibration while boosting visual reasoning accuracy, and it generalizes to out-of-distribution benchmarks across model scales and architectures.

Machine unlearning is increasingly important for large language models, yet unlearning in Mixture-of-Experts (MoE) architectures remains underexplored. Unlike dense models, MoE architectures employ a router at each layer to assign each token to a sparse subset of experts. In this work, we observe that forget data often activates a small subset of experts disproportionately, while these experts may receive much weaker activation from retain data. This forget--retain routing mismatch can leave forget-critical experts under-regularized during unlearning. To address this, we propose TRACE, Targeted Routing-Aware Calibration of Experts, for MoE unlearning. TRACE first detects forget-critical experts from offline activation statistics, and then calibrates retain regularization by reweighting token-level retain losses so that each selected expert's retain-side activation frequency better matches its forget-side counterpart. Experiments on WMDP and MUSE-BOOKS across multiple MoE LLMs show that TRACE consistently improves the forget-utility trade-off, yielding a 9\% relative utility improvement over the strongest baseline under comparable forgetting quality and the best performance on three out of four MUSE-BOOKS metrics.

On-policy distillation (OPD) is an increasingly important paradigm for post-training language models. However, we identify a pervasive Scaling Law of Miscalibration: while OPD effectively improves task accuracy, it systematically traps models in severe overconfidence. We trace this failure to an information mismatch: teacher supervision is formed under privileged context available during training, whereas the deployed model must report confidence using only deployment-time information. We formalize this perspective theoretically, showing that teacher-conditioned success is generally not a valid target for deployment-time confidence and that helpful privileged context induces entropy collapse and a systematic optimism bias. To address this, we propose a calibration-aware OPD framework, CaOPD, that estimates empirical confidence from model rollouts, replaces self-reported confidence with this student-grounded target, and distills the revised response through the same self-distillation pipeline. Experiments across various models and domains show that CaOPD achieves Pareto-optimal calibration while maintaining competitive capability, generalizing robustly under out-of-distribution and continual learning. Our findings highlight that capability distillation does not imply calibrated confidence, and that confidence should be treated as an essential objective in post-training. Code: https://github.com/SalesforceAIResearch/CaOPD

Model merging combines task experts into one model and avoids joint training, retraining, or deploying many expert models, but the merged model often still underperforms task experts. We study this performance gap through feature drift, the difference between features produced by the merged model and by the expert on the same input. Our theory decomposes this drift into upstream propagation and local mismatch, tracks how it propagates and combines through later layers in forward order, and links final feature drift to output drift. This view motivates FeatCal, which uses a small calibration set to calibrate the merged model weights layer by layer in forward order, reducing feature drift while staying close to merged weights and preserving the benefits of model merging. FeatCal uses an efficient closed-form solution to update model weights, with no gradient descent, iterative optimization, or extra modules. On the main CLIP and GLUE benchmarks, FeatCal beats Surgery and ProbSurgery, the closest post-merging calibration baselines: 85.5% vs. 77.0%/78.8% on CLIP-ViT-B/32 Task Arithmetic (TA) and 85.2% vs. 83.7%/82.2% on FLAN-T5-base GLUE. On CLIP-ViT-B/32, 8 examples per task reach 82.9%, and 256 examples per task take 53 seconds, about 4x faster than both baselines, showing better sample efficiency and lower calibration cost.

Large Vision-Language Models (LVLMs) often suffer from hallucinations, generating descriptions that include visual details absent from the input image. Recent preference alignment methods typically rely on supervision distilled from stronger models such as GPT. However, this offline paradigm introduces a Supervision-Perception Mismatch: the student model is forced to align with fine-grained details beyond its perceptual capacity, learning to guess rather than to see. To obtain reliable self-supervision for online learning, we identify a Generative-Discriminative Gap within LVLMs, where models exhibit higher accuracy on discriminative verification than open-ended generation. Leveraging this capability, we propose Online Self-CAlibRation (OSCAR), a framework that integrates Monte Carlo Tree Search with a Dual-Granularity Reward Mechanism to construct preference data and iteratively refines the model via Direct Preference Optimization. Extensive experiments demonstrate that OSCAR achieves state-of-the-art performance on hallucination benchmarks while improving general multimodal capabilities.

Synthetic chord substitutions offer controlled tests of music generation, but their effects can differ from those of a complete recognized chord sequence. We propose structure-matched calibration, which constructs synthetic chord sequences that match the changed positions and harmonic-relation composition of recognizer replay. Paired generation compares both target-response magnitude and output-chord agreement with replay. On 29 of 30 MUSDB18-HQ songs, central four-second tritone corruption produces a larger target response than complete replay in MIDI-SAG. On 24 held-out MoisesDB songs, structure matching reduces target-response distance to replay by 81% for MIDI-SAG and 77% for MusicGen-Chord. Distance decreases on every song in both models with CNN--CRF. Joint matching also reduces output-chord mismatch with replay by 8--17 percentage points relative to temporal or relational matching alone.

Typed-decision models such as TypeSafe's Jev answer a declared yes/no or multiple-choice question about a state with a probability instead of text, and their evaluations report accuracy and calibration. Neither requires that the probabilities a model gives to logically related questions fit together item by item, which is what a system that acts on those probabilities needs. We test this property, coherence, with a battery of logically linked questions that needs no labels. For 160 items from ChaosNLI and PubMedQA, each with three mutually exclusive labels, we ask whether the label is X, whether it is not X, whether it is one of the other two labels, and which label applies. On 480 negation pairs, Jev's probabilities for "the label is X" and "the label is not X" miss summing to one by 0.064 on average (95% CI 0.055 to 0.072). Qwen3.8-27B, run from its official BF16 weights, misses by 0.293 with first-token probabilities and by 0.122 with verbalized probabilities. The gap to the first-token readout persists on pairs where both systems give similar probabilities, without double-negation labels, and after averaging Jev's repeated calls. Jev is not coherent either: its violations are about five times its repeat noise, and it over-endorses statements about single labels, so that its three single-label probabilities sum to 1.14 on average. The two systems also fail differently. Qwen3.8-27B's first-token readout under-endorses the complement of a label whether or not the question contains "not", rejecting both a statement and its negation in 196 of 480 pairs, and it does not become more coherent where it is more confident, whereas Jev's violations concentrate where its answer is uncertain. Because the checks need no labels, they expose biases that appear only when question forms are compared, and inconsistencies within items.

Deep neural networks have a clear degradation when applying to the unseen environment due to the covariate shift. Conventional approaches like domain adaptation requires the pre-collected target data for iterative training, which is impractical in real-world applications. In this paper, we propose to adapt the deep models to the novel environment during inference. An previous solution is test time normalization, which substitutes the source statistics in BN layers with the target batch statistics. However, we show that test time normalization may potentially deteriorate the discriminative structures due to the mismatch between target batch statistics and source parameters. To this end, we present a general formulation alpha-BN to calibrate the batch statistics by mixing up the source and target statistics for both alleviating the domain shift and preserving the discriminative structures. Based on alpha-BN, we further present a novel loss function to form a unified test time adaptation framework Core, which performs the pairwise class correlation online optimization. Extensive experiments show that our approaches achieve the state-of-the-art performance on total twelve datasets from three topics, including model robustness to corruptions, domain generalization on image classification and semantic segmentation. Particularly, our alpha-BN improves 28.4\% to 43.9\% on GTA5 rightarrow Cityscapes without any training, even outperforms the latest source-free domain adaptation method.

Semi-supervised learning (SSL) uses unlabeled data to improve the performance of machine learning models when labeled data is scarce. However, its real-world applications often face the label distribution mismatch problem, in which the unlabeled dataset includes instances whose ground-truth labels are absent from the labeled training dataset. Recent studies, referred to as safe SSL, have addressed this issue by using both classification and out-of-distribution (OOD) detection. However, the existing methods may suffer from overconfidence in deep neural networks, leading to increased SSL errors because of high confidence in incorrect pseudo-labels or OOD detection. To address this, we propose a novel method, CaliMatch, which calibrates both the classifier and the OOD detector to foster safe SSL. CaliMatch presents adaptive label smoothing and temperature scaling, which eliminates the need to manually tune the smoothing degree for effective calibration. We give a theoretical justification for why improving the calibration of both the classifier and the OOD detector is crucial in safe SSL. Extensive evaluations on CIFAR-10, CIFAR-100, SVHN, TinyImageNet, and ImageNet demonstrate that CaliMatch outperforms the existing methods in safe SSL tasks.

Speculative decoding accelerates memory-bound LLM inference without quality degradation by using a fast drafter to propose multiple candidate tokens and the target model to verify them in parallel. However, conventional sequential speculative decoding suffers from mutual waiting between drafting and verification, and repeated exchange of intermediate states further increases memory access overhead. Parallel speculative decoding addresses this limitation by performing drafting and verification within a single target forward pass, allowing future drafts to be prepared while current candidates are being verified. Although effective at small batch sizes, existing parallel speculative decoding methods either require costly continual pretraining with quality degradation or suffer from low acceptance rates. More importantly, this paradigm inherently suffers from uncertainty in both the bonus token and the accepted length, leading to draft verification mismatch and causing throughput gains to collapse at large batch sizes. To address these limitations, we introduce FlexDraft, a lossless speculative decoding framework that flexibly adapts to varying batch sizes through three key designs. (1) Attention Tuning enables block diffusion drafting by tuning only the attention projectors of the final few layers on mask tokens, while keeping the autoregressive path frozen to preserve the target distribution and produce high quality drafts with minimal trainable parameters. (2) Bonus-guided Calibration uses a lightweight MLP conditioned on the resolved bonus token to calibrate draft logits, mitigating draft verification mismatch caused by bonus token uncertainty. (3) Flex Decoding dynamically switches between parallel draft and verify at small batch sizes and sequential draft then verify at large batch sizes, and adjusts verification length based on draft confidence to eliminate redundant computation.

On-policy distillation (OPD) provides dense teacher supervision on student-generated trajectories, but standard reverse-KL training can assign insufficient probability to other plausible continuations. Teacher entropy alone does not reveal whether uncertainty is concentrated among a few plausible next tokens or dispersed over a long probability tail, nor whether the student already represents those candidates well. Moreover, local teacher probabilities may not predict downstream success. We introduce Sparse Probing and Outcome-calibrated Targets OPD (SPOT), which addresses two coupled decisions, where to probe and what to distill, through an acquisition--exploration--exploitation procedure. During acquisition, a position-level score combines normalized teacher entropy, the probability mass captured by a small top-k candidate set, and student--teacher mismatch to allocate a limited probing budget. During exploration, SPOT evaluates teacher-proposed candidates through verifier-scored student continuations. During exploitation, these outcomes produce a closed-form, KL-regularized target that favors candidates with better downstream outcomes while remaining anchored to the teacher distribution. Extensive experiments across multiple student models and reasoning benchmarks demonstrate the effectiveness of SPOT in improving reasoning performance while balancing solution quality and coverage.

Dual-encoder retrievers depend on the principle that relevant documents should score higher than irrelevant ones for a given query. Yet the dominant Noise Contrastive Estimation (NCE) objective, which underpins Contrastive Loss, optimizes a softened ranking surrogate that we rigorously prove is fundamentally oblivious to score separation quality and unrelated to AUC. This mismatch leads to poor calibration and suboptimal performance in downstream tasks like retrieval-augmented generation (RAG). To address this fundamental limitation, we introduce the MW loss, a new training objective that maximizes the Mann-Whitney U statistic, which is mathematically equivalent to the Area under the ROC Curve (AUC). MW loss encourages each positive-negative pair to be correctly ranked by minimizing binary cross entropy over score differences. We provide theoretical guarantees that MW loss directly upper-bounds the AoC, better aligning optimization with retrieval goals. We further promote ROC curves and AUC as natural threshold free diagnostics for evaluating retriever calibration and ranking quality. Empirically, retrievers trained with MW loss consistently outperform contrastive counterparts in AUC and standard retrieval metrics. Our experiments show that MW loss is an empirically superior alternative to Contrastive Loss, yielding better-calibrated and more discriminative retrievers for high-stakes applications like RAG.

Multimodal Large Language Models (MLLMs) are often constrained by a language-space bottleneck, forcing complex visual reasoning into discrete tokens which can lose perceptual nuance. A promising alternative is continuous latent reasoning, where the goal is to discover implicit reasoning pathways that bridge the multimodal query and the final answer. However, this introduces a severe train-inference mismatch: a training-time posterior, conditioned on the ground-truth answer, can exploit answer-dependent shortcuts. Standard variational training then forces the inference-time prior to mimic a posterior that has access to information unavailable at test time, leading to poor performance. To address this, we propose Asymmetric Mutual Variational Learning (AMVL), a framework that resolves this mismatch via a bidirectional calibration objective. A forward KL divergence trains the target-agnostic prior to match the posterior, while a novel reverse KL divergence simultaneously regularizes the posterior, preventing it from collapsing into inference-incompatible regions and mitigating this ``answer leakage''. We provide theoretical analysis formalizing this leakage as prior contamination and prove that our dual-KL objective reduces it. We instantiate AMVL in a latent-integrated MLLM and show that it consistently outperforms strong discrete and latent-reasoning baselines, improving the average score on the complex BLINK benchmark by +10.83 and achieving gains of up to +32.00 on individual reasoning tasks, with analyses confirming improved latent-space stability.

Latent world models rely on representation geometry for planning, yet regularizing the latent marginal alone does not determine the state-to-state relationships used for action selection. We show that this can cause planning-relevant novelty structure to be weakened as representations are transformed into the final latent used by the planner. We introduce Aligned Transport of Latent Structure (ATLAS), a training objective that explicitly preserves relational geometry while calibrating the global latent distribution. ATLAS transfers normalized pairwise structure from an informative encoder representation to the planning latent and uses Wasserstein embedding matching (WEMReg) to calibrate its marginal through one-dimensional Wasserstein-2 transport. Our analysis shows that relational preservation and marginal calibration impose non-redundant constraints, and connects finite-candidate planning stability to relational distortion, latent-scale mismatch, and prediction error. Instantiated in LeWM, ATLAS improves mean goal-reaching success across PushT, TwoRoom, and OGBench-Cube on both lower- and higher-novelty evaluation subsets, with the largest gain on higher-novelty TwoRoom episodes. Representation and rollout diagnostics further show stronger novelty-related structure in the planning latent, improved marginal calibration, and lower multi-step prediction error. Together, these results highlight preservation of planning-relevant latent geometry as an important ingredient for reliable world-model planning. Code is available at https://anonymous.4open.science/r/atlas-world-model-72C4/.

A recurring proposal in legal AI is to improve case-outcome prediction by fusing uncertainty tools (evidence graphs with belief propagation, sequential Bayesian odds updating, Dempster-Shafer combination, and conformal prediction) into one pipeline. We test this on 1,000 real European Court of Human Rights cases from LexGLUE and FairLex, predicting whether the Court found a Convention violation from the case's fact paragraphs. We compare three families across two frontier LLMs (Claude Opus 4.8 and GPT-5.5) as per-fact evidence estimators: (A) the raw LLM, (B) the LLM routed through the fusion pipeline, and (C) a term-frequency baseline through the same pipeline. Across roughly 4,750 tests we find: (1) on discrimination (AUROC around 0.83) the pipeline yields no improvement over either the raw LLM or the baseline; a frontier LLM used directly is the strongest single discriminator. (2) Naively composing an LLM with Bayesian-odds and Dempster-Shafer fusion more than doubles calibration error (ECE from about 0.16 to 0.46) via a prior-mismatch mechanism that replicates across both models. (3) Dempster-Shafer fusion is actively unsafe on long chains, committing confidently to wrong labels at below-chance accuracy; we recommend removing it. (4) The pipeline's genuine value is operational: routed through a conformal selective-prediction layer, the system decides which cases to automate and which to escalate. After removing Dempster-Shafer, recalibrating, and applying class-conditional risk control on the full 1,000-case set, the tuned engine auto-clears at 96.8 percent accuracy with 0.5 percent errors escaping and 96.3 percent caught for review, versus 85.9 / 3.8 / 72.1 for an untuned baseline. The contribution of such pipelines in law is calibrated trust, not sharper prediction.

Diffusion models have achieved great success in image generation tasks through iterative noise estimation. However, the heavy denoising process and complex neural networks hinder their low-latency applications in real-world scenarios. Quantization can effectively reduce model complexity, and post-training quantization (PTQ), which does not require fine-tuning, is highly promising in accelerating the denoising process. Unfortunately, we find that due to the highly dynamic distribution of activations in different denoising steps, existing PTQ methods for diffusion models suffer from distribution mismatch issues at both calibration sample level and reconstruction output level, which makes the performance far from satisfactory, especially in low-bit cases. In this paper, we propose Enhanced Distribution Alignment for Post-Training Quantization of Diffusion Models (EDA-DM) to address the above issues. Specifically, at the calibration sample level, we select calibration samples based on the density and diversity in the latent space, thus facilitating the alignment of their distribution with the overall samples; and at the reconstruction output level, we propose Fine-grained Block Reconstruction, which can align the outputs of the quantized model and the full-precision model at different network granularity. Extensive experiments demonstrate that EDA-DM outperforms the existing post-training quantization frameworks in both unconditional and conditional generation scenarios. At low-bit precision, the quantized models with our method even outperform the full-precision models on most datasets.

Tabular Foundation Models (TFMs) achieve state-of-the-art zero-shot accuracy on small tabular datasets by meta-learning over synthetic data-generating processes -- making them highly attractive for practitioners who cannot afford large annotated corpora. However, their in-context learning mechanism assumes approximately clean inputs: missing values, outliers, and duplicates in the real-world data create a prior mismatch that degrades both accuracy and confidence calibration simultaneously. Correcting this mismatch requires sequential decisions over cleaning operators whose interactions no static preprocessing rule can anticipate -a natural fit for reinforcement learning~(RL). We introduce L2C2, the first deep RL framework framing tabular data cleaning as prior alignment: a learned policy sequences operators to minimize the distributional gap between dirty input and the TFM's synthetic prior. Six experiments on ten OpenML benchmark datasets establish: 1) three of seven reward designs collapse to degenerate trivial cleaning strategies -- principled reward engineering is scientifically non-trivial; 2) the novel TFMAwareReward reward we propose selects structurally distinct pipelines on 4/10 datasets and achieves higher TabPFN accuracy on those diverging cases (mean 0.851 vs. 0.843; Wilcoxon p=0.063, n=4) while never underperforming; 3) parameterized cleaning actions improve best-found pipeline reward on 9/10 datasets (Wilcoxon p=0.004); and 4) a policy pre-trained on one single source dataset exceeds scratch training at the 2,000-step fine-tuning checkpoint on all three held-out datasets (up to +28.8% after full fine-tuning) demonstrating cross-dataset transfer of prior-alignment knowledge. These findings establish that prior alignment is a principled data preparation strategy for TFM deployment on real-world tabular data.

Modern information systems often involve different types of items, e.g., a text query, an image, a video clip, or an audio segment. This motivates omni-modal embedding models that map heterogeneous modalities into a shared space for direct comparison. However, most recent omni-modal embeddings still rely heavily on implicit alignment inherited from pretrained vision-language model (VLM) backbones. In practice, this causes three common issues: (i) similarity logits have modality-dependent sharpness, so scores are not on a consistent scale; (ii) in-batch negatives become less effective over time because mixed-modality batches create an imbalanced hardness distribution; as a result, many negatives quickly become trivial and contribute little gradient; and (iii) embeddings across modalities show mismatched first- and second-order statistics, which makes rankings less stable. To tackle these problems, we propose e5-omni, a lightweight explicit alignment recipe that adapts off-the-shelf VLMs into robust omni-modal embedding models. e5-omni combines three simple components: (1) modality-aware temperature calibration to align similarity scales, (2) a controllable negative curriculum with debiasing to focus on confusing negatives while reducing the impact of false negatives, and (3) batch whitening with covariance regularization to better match cross-modal geometry in the shared embedding space. Experiments on MMEB-V2 and AudioCaps show consistent gains over strong bi-modal and omni-modal baselines, and the same recipe also transfers well to other VLM backbones. We release our model checkpoint at https://huggingface.co/Haon-Chen/e5-omni-7B.

Lensless imaging enables compact and versatile computational cameras by replacing bulky optics with thin coded elements. However, reconstruction from the resulting measurements is challenging: large-footprint point-spread functions (PSFs) produce highly multiplexed observations, making inversion severely ill-conditioned and sensitive to calibration errors and model mismatch. While deep learning approaches, including hybrid models that incorporate physics priors, have shown promise, explicitly maintaining data fidelity throughout the network hierarchy remains difficult. Here, we propose the Integrated Forward-Inverse Network (IFIN), a physics-guided architecture that interleaves differentiable forward projections with learnable inverse updates at every scale, enabling complementary cues to be exploited jointly in the measurement and image domains. This bidirectional coupling supports progressive, physics-consistent refinement and permits system-constrained PSF kernel adaptation under model uncertainty. On challenging lensless benchmarks, including a newly introduced dataset, IFIN achieves state-of-the-art reconstruction quality. We further observe competitive performance on Gaussian deblurring and simulated inline holography reconstruction, suggesting that the same interleaving principle can extend beyond lensless cameras.

AutoRegressive Visual Generation (ARVG) models retain an architecture compatible with language models, while achieving performance comparable to diffusion-based models. Quantization is commonly employed in neural networks to reduce model size and computational latency. However, applying quantization to ARVG remains largely underexplored, and existing quantization methods fail to generalize effectively to ARVG models. In this paper, we explore this issue and identify three key challenges: (1) severe outliers at channel-wise level, (2) highly dynamic activations at token-wise level, and (3) mismatched distribution information at sample-wise level. To these ends, we propose PTQ4ARVG, a training-free post-training quantization (PTQ) framework consisting of: (1) Gain-Projected Scaling (GPS) mitigates the channel-wise outliers, which expands the quantization loss via a Taylor series to quantify the gain of scaling for activation-weight quantization, and derives the optimal scaling factor through differentiation.(2) Static Token-Wise Quantization (STWQ) leverages the inherent properties of ARVG, fixed token length and position-invariant distribution across samples, to address token-wise variance without incurring dynamic calibration overhead.(3) Distribution-Guided Calibration (DGC) selects samples that contribute most to distributional entropy, eliminating the sample-wise distribution mismatch. Extensive experiments show that PTQ4ARVG can effectively quantize the ARVG family models to 8-bit and 6-bit while maintaining competitive performance. Code is available at http://github.com/BienLuky/PTQ4ARVG .

Overconfidence and underconfidence in machine learning classifiers is measured by calibration: the degree to which the probabilities predicted for each class match the accuracy of the classifier on that prediction. How one measures calibration remains a challenge: expected calibration error, the most popular metric, has numerous flaws which we outline, and there is no clear empirical understanding of how its choices affect conclusions in practice, and what recommendations there are to counteract its flaws. In this paper, we perform a comprehensive empirical study of choices in calibration measures including measuring all probabilities rather than just the maximum prediction, thresholding probability values, class conditionality, number of bins, bins that are adaptive to the datapoint density, and the norm used to compare accuracies to confidences. To analyze the sensitivity of calibration measures, we study the impact of optimizing directly for each variant with recalibration techniques. Across MNIST, Fashion MNIST, CIFAR-10/100, and ImageNet, we find that conclusions on the rank ordering of recalibration methods is drastically impacted by the choice of calibration measure. We find that conditioning on the class leads to more effective calibration evaluations, and that using the L2 norm rather than the L1 norm improves both optimization for calibration metrics and the rank correlation measuring metric consistency. Adaptive binning schemes lead to more stablity of metric rank ordering when the number of bins vary, and is also recommended. We open source a library for the use of our calibration measures.

Model calibration aims to align confidence with prediction correctness. The Cross-Entropy (CE) loss is widely used for calibrator training, which enforces the model to increase confidence on the ground truth class. However, we find the CE loss has intrinsic limitations. For example, for a narrow misclassification, a calibrator trained by the CE loss often produces high confidence on the wrongly predicted class (e.g., a test sample is wrongly classified and its softmax score on the ground truth class is around 0.4), which is undesirable. In this paper, we propose a new post-hoc calibration objective derived from the aim of calibration. Intuitively, the proposed objective function asks that the calibrator decrease model confidence on wrongly predicted samples and increase confidence on correctly predicted samples. Because a sample itself has insufficient ability to indicate correctness, we use its transformed versions (e.g., rotated, greyscaled and color-jittered) during calibrator training. Trained on an in-distribution validation set and tested with isolated, individual test samples, our method achieves competitive calibration performance on both in-distribution and out-of-distribution test sets compared with the state of the art. Further, our analysis points out the difference between our method and commonly used objectives such as CE loss and mean square error loss, where the latters sometimes deviates from the calibration aim.

Applications such as weather forecasting and personalized medicine demand models that output calibrated probability estimates---those representative of the true likelihood of a prediction. Most models are not calibrated out of the box but are recalibrated by post-processing model outputs. We find in this work that popular recalibration methods like Platt scaling and temperature scaling are (i) less calibrated than reported, and (ii) current techniques cannot estimate how miscalibrated they are. An alternative method, histogram binning, has measurable calibration error but is sample inefficient---it requires O(B/ε^2) samples, compared to O(1/ε^2) for scaling methods, where B is the number of distinct probabilities the model can output. To get the best of both worlds, we introduce the scaling-binning calibrator, which first fits a parametric function to reduce variance and then bins the function values to actually ensure calibration. This requires only O(1/ε^2 + B) samples. Next, we show that we can estimate a model's calibration error more accurately using an estimator from the meteorological community---or equivalently measure its calibration error with fewer samples (O(B) instead of O(B)). We validate our approach with multiclass calibration experiments on CIFAR-10 and ImageNet, where we obtain a 35% lower calibration error than histogram binning and, unlike scaling methods, guarantees on true calibration. In these experiments, we also estimate the calibration error and ECE more accurately than the commonly used plugin estimators. We implement all these methods in a Python library: https://pypi.org/project/uncertainty-calibration

Calibration is a fundamental property of a good predictive model: it requires that the model predicts correctly in proportion to its confidence. Modern neural networks, however, provide no strong guarantees on their calibration -- and can be either poorly calibrated or well-calibrated depending on the setting. It is currently unclear which factors contribute to good calibration (architecture, data augmentation, overparameterization, etc), though various claims exist in the literature. We propose a systematic way to study the calibration error: by decomposing it into (1) calibration error on the train set, and (2) the calibration generalization gap. This mirrors the fundamental decomposition of generalization. We then investigate each of these terms, and give empirical evidence that (1) DNNs are typically always calibrated on their train set, and (2) the calibration generalization gap is upper-bounded by the standard generalization gap. Taken together, this implies that models with small generalization gap (|Test Error - Train Error|) are well-calibrated. This perspective unifies many results in the literature, and suggests that interventions which reduce the generalization gap (such as adding data, using heavy augmentation, or smaller model size) also improve calibration. We thus hope our initial study lays the groundwork for a more systematic and comprehensive understanding of the relation between calibration, generalization, and optimization.

Speech deepfake detectors usually emit one score per utterance, but a borderline score does not reveal why two examples differ during retrospective error analysis. We ask whether a final score can be calibrated from component fields while keeping those fields visible for inspection. We build a decision record with a passive detector score and a score from a probe applied to a marked copy. It also includes retrieval support held out of the evaluated family, a margin from a support-set profile, and raw neighbor closeness. A cross-fit calibrator combines these fields and two differences between raw scores into one final score. On matched ASVspoof development data, the calibrated record reduces equal error rate (EER) by 3.48 percentage points relative to the fixed retrieval-augmented rule. It reaches 8.43% EER, whereas a passive WavLM baseline reaches 6.71% on the same subset. The record is therefore not the strongest detector in this comparison. Its value is to retain inspectable component fields while producing one scalar score for retrospective diagnosis.

Despite the impressive generalization capabilities of deep neural networks, they have been repeatedly shown to be overconfident when they are wrong. Fixing this issue is known as model calibration, and has consequently received much attention in the form of modified training schemes and post-training calibration procedures such as temperature scaling. While temperature scaling is frequently used because of its simplicity, it is often outperformed by modified training schemes. In this work, we identify a specific bottleneck for the performance of temperature scaling. We show that for empirical risk minimizers for a general set of distributions in which the supports of classes have overlaps, the performance of temperature scaling degrades with the amount of overlap between classes, and asymptotically becomes no better than random when there are a large number of classes. On the other hand, we prove that optimizing a modified form of the empirical risk induced by the Mixup data augmentation technique can in fact lead to reasonably good calibration performance, showing that training-time calibration may be necessary in some situations. We also verify that our theoretical results reflect practice by showing that Mixup significantly outperforms empirical risk minimization (with respect to multiple calibration metrics) on image classification benchmarks with class overlaps introduced in the form of label noise.

Calibration is commonly evaluated by comparing model confidence with its empirical correctness, implicitly treating reliability as a function of the confidence score alone. However, this view can hide substantial structure: models may be systematically overconfident on some kinds of inputs and underconfident on others, causing global reliability diagnostics to obscure localised calibration failures. To address this, we formulate the problem of discovering hidden miscalibration regimes without assuming access to predefined data slices. We define the corresponding miscalibration field and propose a diagnostic framework for estimating it. Our approach learns a calibration-aware representation of the input space and estimates signed local miscalibration by kernel smoothing in the learned geometry. Across four real-world LLM benchmarks and twelve LLMs, we find that input-dependent calibration heterogeneity is prevalent. We further show that the discovered fields are actionable: they support local confidence correction and reduce calibration error in systematically miscalibrated regions where confidence-based methods such as isotonic regression and temperature scaling are less effective.

Calibration, the alignment of predicted probabilities with true outcome frequencies, is essential for reliable decision-making. While extensively studied for classification and regression, calibration has not been formally addressed for probabilistic label ranking, where the goal is to predict a distribution over orderings of a label set. Naively treating rankings as classes ignores their structure and fails to capture important modalities such as pairwise and top-k predictions. We formalize calibration for label ranking and develop a hierarchy of notions covering full rankings, sub-rankings, and top-k rankings. We prove that full-rank calibration implies the others but not conversely, and sub-ranking and top-k calibration are incomparable. Empirically, we find popular label ranking models are often poorly calibrated, with substantial differences between sub-ranking and top-k metrics. Applying our framework to RLHF reward models, we find that calibration correlates strongly but not perfectly with benchmark accuracy, suggesting it captures a meaningful quality dimension beyond top-1 accuracy. These findings motivate future work on understanding the downstream effects of miscalibration and developing methods to correct it.

Confidence calibration is central to providing accurate and interpretable uncertainty estimates, especially under safety-critical scenarios. However, we find that existing calibration algorithms often overlook the issue of *proximity bias*, a phenomenon where models tend to be more overconfident in low proximity data (i.e., data lying in the sparse region of the data distribution) compared to high proximity samples, and thus suffer from inconsistent miscalibration across different proximity samples. We examine the problem over 504 pretrained ImageNet models and observe that: 1) Proximity bias exists across a wide variety of model architectures and sizes; 2) Transformer-based models are relatively more susceptible to proximity bias than CNN-based models; 3) Proximity bias persists even after performing popular calibration algorithms like temperature scaling; 4) Models tend to overfit more heavily on low proximity samples than on high proximity samples. Motivated by the empirical findings, we propose ProCal, a plug-and-play algorithm with a theoretical guarantee to adjust sample confidence based on proximity. To further quantify the effectiveness of calibration algorithms in mitigating proximity bias, we introduce proximity-informed expected calibration error (PIECE) with theoretical analysis. We show that ProCal is effective in addressing proximity bias and improving calibration on balanced, long-tail, and distribution-shift settings under four metrics over various model architectures. We believe our findings on proximity bias will guide the development of *fairer and better-calibrated* models, contributing to the broader pursuit of trustworthy AI. Our code is available at: https://github.com/MiaoXiong2320/ProximityBias-Calibration.

Network calibration aims to accurately estimate the level of confidences, which is particularly important for employing deep neural networks in real-world systems. Recent approaches leverage mixup to calibrate the network's predictions during training. However, they do not consider the problem that mixtures of labels in mixup may not accurately represent the actual distribution of augmented samples. In this paper, we present RankMixup, a novel mixup-based framework alleviating the problem of the mixture of labels for network calibration. To this end, we propose to use an ordinal ranking relationship between raw and mixup-augmented samples as an alternative supervisory signal to the label mixtures for network calibration. We hypothesize that the network should estimate a higher level of confidence for the raw samples than the augmented ones (Fig.1). To implement this idea, we introduce a mixup-based ranking loss (MRL) that encourages lower confidences for augmented samples compared to raw ones, maintaining the ranking relationship. We also propose to leverage the ranking relationship among multiple mixup-augmented samples to further improve the calibration capability. Augmented samples with larger mixing coefficients are expected to have higher confidences and vice versa (Fig.1). That is, the order of confidences should be aligned with that of mixing coefficients. To this end, we introduce a novel loss, M-NDCG, in order to reduce the number of misaligned pairs of the coefficients and confidences. Extensive experimental results on standard benchmarks for network calibration demonstrate the effectiveness of RankMixup.

Stacking heterogeneous vision backbones (CNNs, ViTs, and hybrids) is the de facto recipe for accuracy, calibration, and robustness, yet two coupled pathologies limit its returns. Prediction-space multicollinearity ill-conditions the meta-learner's Gram matrix, inflating weight variance and producing brittle solutions on a thin manifold. Calibration collapse compounds constituent miscalibration through naive linear stacking, so adding more models can hurt expected calibration error (ECE). Existing remedies, ridge regularization, greedy selection, model soups, and SWAG address at most one of these issues, and none jointly target conditioning and calibration in heterogeneous prediction pools. We introduce CORE-STACK+, a preconditioning pipeline with four components: (i) a kernelized redundancy filter that removes non-linear inter-model dependencies invisible to Pearson correlation, using Centered Kernel Alignment (CKA) [23]; (ii) a <15K-parameter differentiable meta-feature gate that learns per-sample attention over ensemble statistics; (iii) a spectrum-adaptive Ridge penalty lambda^{star}=lmax(Chat)/SNR(Chat) derived from a Marchenko-Pastur signal-noise decomposition, eliminating nested cross-validation; and (iv) a Laplace-approximate Bayesian blender replacing inverse-RMSE heuristics. We prove a PAC-Bayes excess-risk bound that, for the first time, jointly accounts for prediction-space redundancy and meta-learner capacity. Across six benchmarks, CORE-STACK+ delivers +1.8% top-1 on ImageNet-1K, -4.2 mCE on ImageNet-C, +0.9 mIoU on ADE20K, and +1.3 AP on COCO, while reducing retained models by 35-57% and inference FLOPs by up to 41%. ECE improves 2.1times over deep ensembles without post hoc temperature scaling.

Calibration of language models -- the alignment between expressed or implicit confidence and empirical correctness -- is a well-studied subfield within NLP. Methods to measure it already exist. The problem is adoption: outside this subfield, NLP research regularly introduces new models, datasets, and benchmarks without checking whether the model's confidence scores are meaningful. We argue that this adoption gap is a major obstacle to trustworthy LLM evaluation. Miscalibration causes problems in two distinct areas: at deployment, where overconfident mistakes cause real harm, and inside the research pipeline, where methods like LLM-as-a-judge, synthetic data generation, and active learning rely on calibrated confidence without verifying it. Standard calibration metrics only require two inputs per example: a confidence score and a correctness judgment. Most benchmarks in use today already provide both, meaning calibration can be reported immediately. For open-ended generation, however, defining these two inputs is still an open challenge. We argue that each NLP subfield should pair its main performance metric with a calibration score and call for treating calibration as an essential property of every model rather than a niche topic.

Deep neural networks have demonstrated remarkable performance across numerous learning tasks but often suffer from miscalibration, resulting in unreliable probability outputs. This has inspired many recent works on mitigating miscalibration, particularly through post-hoc recalibration methods that aim to obtain calibrated probabilities without sacrificing the classification performance of pre-trained models. In this study, we summarize and categorize previous works into three general strategies: intuitively designed methods, binning-based methods, and methods based on formulations of ideal calibration. Through theoretical and practical analysis, we highlight ten common limitations in previous approaches. To address these limitations, we propose a probabilistic learning framework for calibration called h-calibration, which theoretically constructs an equivalent learning formulation for canonical calibration with boundedness. On this basis, we design a simple yet effective post-hoc calibration algorithm. Our method not only overcomes the ten identified limitations but also achieves markedly better performance than traditional methods, as validated by extensive experiments. We further analyze, both theoretically and experimentally, the relationship and advantages of our learning objective compared to traditional proper scoring rule. In summary, our probabilistic framework derives an approximately equivalent differentiable objective for learning error-bounded calibrated probabilities, elucidating the correspondence and convergence properties of computational statistics with respect to theoretical bounds in canonical calibration. The theoretical effectiveness is verified on standard post-hoc calibration benchmarks by achieving state-of-the-art performance. This research offers valuable reference for learning reliable likelihood in related fields.

In recent years, deep neural networks (DNNs) have demonstrated state-of-the-art performance across various domains. However, despite their success, they often face calibration issues, particularly in safety-critical applications such as autonomous driving and healthcare, where unreliable predictions can have serious consequences. Recent research has started to improve model calibration from the view of the classifier. However, the exploration of designing the classifier to solve the model calibration problem is insufficient. Let alone most of the existing methods ignore the calibration errors arising from underconfidence. In this work, we propose a novel method by balancing learnable and ETF classifiers to solve the overconfidence or underconfidence problem for model Calibration named BalCAL. By introducing a confidence-tunable module and a dynamic adjustment method, we ensure better alignment between model confidence and its true accuracy. Extensive experimental validation shows that ours significantly improves model calibration performance while maintaining high predictive accuracy, outperforming existing techniques. This provides a novel solution to the calibration challenges commonly encountered in deep learning.

Learned post-training quantization (PTQ) calibration fits quantizer parameters on a small calibration set, and for a text embedder the natural supervision is retrieval relevance. We ask two questions that are usually conflated: how far to calibrate, and whether to calibrate at all. Across three embedders (e5-base-v2, BGE-M3, EmbeddingGemma-300m) at 4-bit weight quantization, 161 calibration runs, the outcome of a fixed procedure ranges from a gain to catastrophic degradation, and the driver is the dose of the update, measured as the functional displacement D_func of the quantized model from its uncalibrated start. On EmbeddingGemma the same learning-rate grid gives +1.47 to -71.53 points of in-domain NDCG@10 change; a label-free cosine objective collapses at the same dose (-69.52 vs -71.63), so the collapse is a property of learnable calibration rather than of retrieval supervision. Objective sensitivity is heterogeneous: on e5, ranking calibration is substantially more robust than cosine at matched displacement (+14.16 +/- 4.34 pp, 95% t-CI [+3.37, +24.96], three paired slates), whereas on BGE-M3 the ordering is directionally opposite but unresolved ([-5.18, +2.38]). Dose is the main axis but not a sufficient statistic: equal D_func reached along different paths differs by up to 1.61 pp. We therefore treat calibration as an optional intervention. A pre-registered rule that accepts a checkpoint only when a per-query paired confidence interval on a 25% calibration-validation split clears the uncalibrated baseline was run on 6 independent slates and five arms. It never selected a checkpoint below its slate's baseline (0 harmful selections in 30 decisions), retained 8 of 11 beneficial updates, and paid a mean oracle regret of 1.52 pp with one abstention that forfeited 11.13 pp, a safety-opportunity trade-off, not a free improvement. We report what remains open, including label efficiency.

A well-calibrated model should express confidence that matches its actual accuracy -- when it claims 80\% confidence, it should be correct 80\% of the time. While large language models (LLMs) have achieved remarkable performance across diverse tasks, their epistemic calibration remains poorly understood. We introduce KalshiBench, a benchmark of 300 prediction market questions from Kalshi, a CFTC-regulated exchange, with verifiable real-world outcomes occurring after model training cutoffs. Unlike traditional benchmarks measuring accuracy on static knowledge, KalshiBench evaluates whether models can appropriately quantify uncertainty about genuinely unknown future events. We evaluate five frontier models -- Claude Opus 4.5, GPT-5.2, DeepSeek-V3.2, Qwen3-235B, and Kimi-K2 -- and find systematic overconfidence across all models. Even the best-calibrated model (Claude Opus 4.5, ECE=0.120) shows substantial calibration errors, while reasoning-enhanced models like GPT-5.2-XHigh exhibit worse calibration (ECE=0.395) despite comparable accuracy. Critically, only one model achieves a positive Brier Skill Score, indicating most models perform worse than simply predicting base rates. Our findings suggest that scaling and enhanced reasoning do not automatically confer calibration benefits, highlighting epistemic calibration as a distinct capability requiring targeted development.

Accurate probabilistic predictions are essential for optimal decision making. While neural network miscalibration has been studied primarily in classification, we investigate this in the less-explored domain of regression. We conduct the largest empirical study to date to assess the probabilistic calibration of neural networks. We also analyze the performance of recalibration, conformal, and regularization methods to enhance probabilistic calibration. Additionally, we introduce novel differentiable recalibration and regularization methods, uncovering new insights into their effectiveness. Our findings reveal that regularization methods offer a favorable tradeoff between calibration and sharpness. Post-hoc methods exhibit superior probabilistic calibration, which we attribute to the finite-sample coverage guarantee of conformal prediction. Furthermore, we demonstrate that quantile recalibration can be considered as a specific case of conformal prediction. Our study is fully reproducible and implemented in a common code base for fair comparisons.

Conformal prediction is often calibrated with a single pooled threshold, but this can hide cross-group heterogeneity in score distributions and distort group-wise coverage. We study this phenomenon through the population score distributions underlying split conformal calibration. First, we derive a conservation law and lower bound showing that pooled calibration incurs irreducible group-wise coverage distortion at a scale set by cross-group quantile heterogeneity. Second, we demonstrate that the two leading fairness definitions for conformal prediction, Equalized Coverage and Equalized Set Size, are fundamentally in tension. Third, we quantify the cost of moving between policies which treat groups separately or pool them. Experiments on synthetic and real data confirm the same bidirectional trade-off after finite-sample calibration. Our results show that, for the policy families studied here, calibration choice does not remove cross-group heterogeneity; it determines whether the resulting distortion appears in the coverage or size dimension, providing a principled lens for analyzing fairness-oriented calibration choices in practice.

Confidence calibration -- the problem of predicting probability estimates representative of the true correctness likelihood -- is important for classification models in many applications. We discover that modern neural networks, unlike those from a decade ago, are poorly calibrated. Through extensive experiments, we observe that depth, width, weight decay, and Batch Normalization are important factors influencing calibration. We evaluate the performance of various post-processing calibration methods on state-of-the-art architectures with image and document classification datasets. Our analysis and experiments not only offer insights into neural network learning, but also provide a simple and straightforward recipe for practical settings: on most datasets, temperature scaling -- a single-parameter variant of Platt Scaling -- is surprisingly effective at calibrating predictions.

We introduce a framework for calibrating machine learning models so that their predictions satisfy explicit, finite-sample statistical guarantees. Our calibration algorithms work with any underlying model and (unknown) data-generating distribution and do not require model refitting. The framework addresses, among other examples, false discovery rate control in multi-label classification, intersection-over-union control in instance segmentation, and the simultaneous control of the type-1 error of outlier detection and confidence set coverage in classification or regression. Our main insight is to reframe the risk-control problem as multiple hypothesis testing, enabling techniques and mathematical arguments different from those in the previous literature. We use the framework to provide new calibration methods for several core machine learning tasks, with detailed worked examples in computer vision and tabular medical data.

Reliable probability estimates are critical in many machine learning applications, yet modern classifiers are often poorly calibrated. Post-hoc calibration provides a simple and widely used solution, but the large number of proposed methods, combined with small-scale and inconsistent evaluations, makes it difficult to determine which approaches are truly effective in practice. We introduce a large-scale, standardized benchmark for post-hoc calibration, covering nearly 2000 experiments across tabular and computer vision tasks, including binary, multiclass, and large-scale classification settings. Our benchmark aggregates predictions from a diverse set of classical models, modern deep learning architectures, and foundation models, and provides unified, reproducible implementations of dozens of calibration methods within a common evaluation framework. We argue that Post-Hoc Improvement (PHI) in proper scoring rules offers a principled alternative to traditional calibration error estimators for comparing post-hoc methods, capturing both calibration quality and potential degradation to the model's predictive performance. Using this framework, we conduct the most comprehensive empirical study of post-hoc calibration to date. Our results reveal consistent patterns across domains: smooth calibration functions outperform binning-based approaches, dedicated multiclass methods are essential in high-dimensional settings, and generic machine learning models are not competitive without calibration-specific design. To facilitate future research, we release all data, code, and evaluation tools, providing a plug-and-play benchmark for developing and comparing calibration methods.

Recent advances in machine learning have significantly improved prediction accuracy in various applications. However, ensuring the calibration of probabilistic predictions remains a significant challenge. Despite efforts to enhance model calibration, the rigorous statistical evaluation of model calibration remains less explored. In this work, we develop confidence intervals the ell_2 Expected Calibration Error (ECE). We consider top-1-to-k calibration, which includes both the popular notion of confidence calibration as well as full calibration. For a debiased estimator of the ECE, we show asymptotic normality, but with different convergence rates and asymptotic variances for calibrated and miscalibrated models. We develop methods to construct asymptotically valid confidence intervals for the ECE, accounting for this behavior as well as non-negativity. Our theoretical findings are supported through extensive experiments, showing that our methods produce valid confidence intervals with shorter lengths compared to those obtained by resampling-based methods.

Deep neural networks are increasingly utilized in various machine learning tasks. However, as these models grow in complexity, they often face calibration issues, despite enhanced prediction accuracy. Many studies have endeavored to improve calibration performance through the use of specific loss functions, data preprocessing and training frameworks. Yet, investigations into calibration properties have been somewhat overlooked. Our study leverages the Neural Architecture Search (NAS) search space, offering an exhaustive model architecture space for thorough calibration properties exploration. We specifically create a model calibration dataset. This dataset evaluates 90 bin-based and 12 additional calibration measurements across 117,702 unique neural networks within the widely employed NATS-Bench search space. Our analysis aims to answer several longstanding questions in the field, using our proposed dataset: (i) Can model calibration be generalized across different datasets? (ii) Can robustness be used as a calibration measurement? (iii) How reliable are calibration metrics? (iv) Does a post-hoc calibration method affect all models uniformly? (v) How does calibration interact with accuracy? (vi) What is the impact of bin size on calibration measurement? (vii) Which architectural designs are beneficial for calibration? Additionally, our study bridges an existing gap by exploring calibration within NAS. By providing this dataset, we enable further research into NAS calibration. As far as we are aware, our research represents the first large-scale investigation into calibration properties and the premier study of calibration issues within NAS. The project page can be found at https://www.taolinwei.com/calibration-study

This paper proposes a new metric to measure the calibration error of probabilistic binary classifiers, called test-based calibration error (TCE). TCE incorporates a novel loss function based on a statistical test to examine the extent to which model predictions differ from probabilities estimated from data. It offers (i) a clear interpretation, (ii) a consistent scale that is unaffected by class imbalance, and (iii) an enhanced visual representation with repect to the standard reliability diagram. In addition, we introduce an optimality criterion for the binning procedure of calibration error metrics based on a minimal estimation error of the empirical probabilities. We provide a novel computational algorithm for optimal bins under bin-size constraints. We demonstrate properties of TCE through a range of experiments, including multiple real-world imbalanced datasets and ImageNet 1000.

On-policy reinforcement learning for large language models assumes that training responses are sampled from the current policy. In practice, an inference engine samples the responses and a separate trainer computes the gradients, and the training-inference mismatch between the two makes the training data off-policy. The mismatch has two sources, the numerics of the engine and the stale weights of asynchronous sampling, and a correction that stabilizes training under one source can fail under the other. We ask which property of a mismatch source decides the correction it needs. Evaluating the trainer at the sampler's weights splits each sampled-token error exactly into a numerical discrepancy of the engine and a policy lag of the trainer, and we follow both through training. The numerical discrepancy stays approximately constant, so it biases the updates by a nearly fixed amount, and centering the score at each prefix removes its leading bias. The policy lag is produced by the trainer's own updates: the bias it leaves enters the next update, which enlarges the next lag and closes a feedback loop. Importance weighting cuts this loop only while the lag ratio stays concentrated, and on Qwen3-1.7B it fails at the step where the effective sample size of the ratio falls below one half. From this account we derive the discrepancy-lag correction (DLC), which centers the numerical discrepancy, clips the lag ratio against the sampler's weights and resynchronizes the sampler when this effective sample size falls below one half. Under a stale sampler, DLC keeps the KL divergence from on-policy training within twice the KL between two independent on-policy trainings on Qwen3-0.6B and Qwen3-1.7B, and its resynchronization prevents collapses that the per-token corrections leave and that a KL measured on the sampler's prefixes does not detect.

Despite their impressive predictive performance in various computer vision tasks, deep neural networks (DNNs) tend to make overly confident predictions, which hinders their widespread use in safety-critical applications. While there have been recent attempts to calibrate DNNs, most of these efforts have primarily been focused on classification tasks, thus neglecting DNN-based object detectors. Although several recent works addressed calibration for object detection and proposed differentiable penalties, none of them are consistent estimators of established concepts in calibration. In this work, we tackle the challenge of defining and estimating calibration error specifically for this task. In particular, we adapt the definition of classification calibration error to handle the nuances associated with object detection, and predictions in structured output spaces more generally. Furthermore, we propose a consistent and differentiable estimator of the detection calibration error, utilizing kernel density estimation. Our experiments demonstrate the effectiveness of our estimator against competing train-time and post-hoc calibration methods, while maintaining similar detection performance.

Conformal prediction guarantees marginal coverage, but a single calibration threshold can still spread that coverage unevenly, over-covering easy regions and under-covering hard ones. SimplexUQ is, to our knowledge, the first benchmark and reproducible protocol for measuring this allocation problem on simplex-valued predictions; it compares existing conformal wrappers rather than proposing a new one. Its task suite, SimplexTasks-12, combines six controlled synthetic regimes with six frozen-predictor real tasks spanning class probabilities, topic mixtures, spectral abundances, cell-type fractions, age distributions, and emotion mixtures. Each comparison fixes the predictor, score, and response-free stratification map, varies only the wrapper, and reports marginal coverage, worst-stratum coverage, max disparity, and within-task radius and compute. Global calibration can look valid while failing badly: on CIFAR-10 it attains 0.900 marginal coverage but only 0.542 in the worst entropy stratum, and Mondrian calibration raises that stratum to 0.886 while reducing max disparity from 0.358 to 0.022. No wrapper dominates, however. Under smooth synthetic heterogeneity, several repairs are competitive; fixed-map analyses show that rankings depend on the evaluation groups and protocol; and in a 12-task comparison, Mondrian has lower disparity on its single target partition for all 12 tasks, whereas BatchMVP has lower disparity over overlapping groups on five. These are empirical comparisons, not new coverage guarantees. A controlled predictor-bias sweep shows that removing predictor bias only partly reduces global-threshold disparity. We release task cards, result provenance, permitted derived arrays, and rebuild instructions, and treat wrapper selection as a diagnostic comparison rather than a universal ranking.

Research has shown that deep networks tend to be overly optimistic about their predictions, leading to an underestimation of prediction errors. Due to the limited nature of data, existing studies have proposed various methods based on model prediction probabilities to bin the data and evaluate calibration error. We propose a more generalized definition of calibration error called Partitioned Calibration Error (PCE), revealing that the key difference among these calibration error metrics lies in how the data space is partitioned. We put forth an intuitive proposition that an accurate model should be calibrated across any partition, suggesting that the input space partitioning can extend beyond just the partitioning of prediction probabilities, and include partitions directly related to the input. Through semantic-related partitioning functions, we demonstrate that the relationship between model accuracy and calibration lies in the granularity of the partitioning function. This highlights the importance of partitioning criteria for training a calibrated and accurate model. To validate the aforementioned analysis, we propose a method that involves jointly learning a semantic aware grouping function based on deep model features and logits to partition the data space into subsets. Subsequently, a separate calibration function is learned for each subset. Experimental results demonstrate that our approach achieves significant performance improvements across multiple datasets and network architectures, thus highlighting the importance of the partitioning function for calibration.

Calibration measures and reliability diagrams are two fundamental tools for measuring and interpreting the calibration of probabilistic predictors. Calibration measures quantify the degree of miscalibration, and reliability diagrams visualize the structure of this miscalibration. However, the most common constructions of reliability diagrams and calibration measures -- binning and ECE -- both suffer from well-known flaws (e.g. discontinuity). We show that a simple modification fixes both constructions: first smooth the observations using an RBF kernel, then compute the Expected Calibration Error (ECE) of this smoothed function. We prove that with a careful choice of bandwidth, this method yields a calibration measure that is well-behaved in the sense of (B{\l}asiok, Gopalan, Hu, and Nakkiran 2023a) -- a consistent calibration measure. We call this measure the SmoothECE. Moreover, the reliability diagram obtained from this smoothed function visually encodes the SmoothECE, just as binned reliability diagrams encode the BinnedECE. We also provide a Python package with simple, hyperparameter-free methods for measuring and plotting calibration: `pip install relplot\`.

Post-hoc calibration corrects reported confidence, yet a multiclass calibrator can also change the associated top-1 prediction. Accuracy captures only the net effect of these changes on correctness, not how often predictions change; the Top-1 Prediction Change Rate (TPCR) instead measures this frequency. We propose Calibrator-Output Repair for Top-1 Decision Preservation (CORD), the first post-fit adapter to impose exact prediction preservation by repairing the full calibrated probability vector. From the original and calibrated outputs alone, CORD determines the mass assigned to the original top-1. The calibrated conditional distribution allocates the remaining mass over the other classes, yielding a repaired vector whose own argmax recovers the original prediction. On the calibration split, CORD coordinates the repaired masses to retain the calibrated outputs' mean mass on original predictions whenever attainable. The adapter alters neither the fitted calibrator nor its direct output, fits no additional supervised map, and requires no user- or validation-tuned hyperparameter. Across CIFAR-10/100 and ImageNet-1K, CORD attains zero TPCR by construction and lowers mean ECE, NLL, and Brier relative to the corresponding direct outputs in every dataset; paired gains persist under distribution shift and across calibration-set sizes. CORD thus removes the preservation constraint from calibrator fitting and assigns exact recovery of the original decision to subsequent output repair. Our code is available at https://github.com/labhai/CORD.

Conformal prediction (CP) provides distribution-free prediction intervals for fixed forecasters, but its standard calibration procedure is often inefficient for time series data, where forecast errors are temporally dependent and change across time and operating conditions. Recent time series CP methods improve local calibration using recent, weighted, or localized residuals. Yet local calibration can remain indirect, since broad residual weighting or additional adaptation procedures may dilute the evidence most relevant to the current prediction. This motivates a simple retrieval and correction strategy that selects similar past residuals as local evidence and then corrects the coverage error left by retrieval. In this paper, we propose Retrieval--Corrected Conformal Prediction (RCCP), a retrieval-augmented calibration method for time series prediction intervals. RCCP builds an asymmetric interval from retrieved one-sided residuals and calibrates its normalized retrieval error with a scalar conformal correction. Thus, retrieval provides local residual evidence, while conformal correction determines the final scale needed for coverage. We provide a coverage-gap bound based on the stability of the normalized retrieval error distribution. Across standard benchmarks and backbone forecasters, RCCP attains the target coverage in every setting and achieves the lowest Winkler scores, with fewer severe misses. RCCP also achieves low calibration and inference overhead, showing that retrieval-corrected calibration is an effective and scalable approach to uncertainty quantification in time series forecasting. Code is available at https://github.com/jinsaaang/rccp.

As AI-based code generation becomes widespread, researchers are investigating the calibration of code LLMs - ensuring their confidence scores faithfully represent the true likelihood of code correctness. To do so, we investigate multicalibration, which can capture additional factors about a coding problem, such as complexity, code length, or programming language used. We study four multicalibration approaches on three function synthesis benchmarks, using latest-generation code LLMs (Qwen3 Coder, GPT-OSS, DeepSeek-R1-Distill). Our results demonstrate that multicalibration can yield distinct improvements over both uncalibrated token likelihoods (+1.03 in skill score) and baseline calibrations (+0.37 in skill score). We study the influence of the aforementioned factors in ablations, and make our dataset (consisting of code generations, likelihoods, and correctness labels) available for future research on code LLM calibration.

The raw-RGB colors of a camera sensor vary due to the spectral sensitivity differences across different sensor makes and models. This paper focuses on the task of mapping between different sensor raw-RGB color spaces. Prior work addressed this problem using a pairwise calibration to achieve accurate color mapping. Although being accurate, this approach is less practical as it requires: (1) capturing pair of images by both camera devices with a color calibration object placed in each new scene; (2) accurate image alignment or manual annotation of the color calibration object. This paper aims to tackle color mapping in the raw space through a more practical setup. Specifically, we present a semi-supervised raw-to-raw mapping method trained on a small set of paired images alongside an unpaired set of images captured by each camera device. Through extensive experiments, we show that our method achieves better results compared to other domain adaptation alternatives in addition to the single-calibration solution. We have generated a new dataset of raw images from two different smartphone cameras as part of this effort. Our dataset includes unpaired and paired sets for our semi-supervised training and evaluation.

The antenna-elements that make up a radio interferometer form a spatial filter that samples components of the Fourier transform of a target radio astronomical source brightness. Along the signal path, there are multiplicative and additive perturbation effects that alter the signal and that should be corrected. The process of mitigating these perturbation effects is called calibration. In this work, we develop a new and fast Maximum Likelihood based estimator of these perturbation effects using the Exponential Map and Lie groups. To evaluate its performance, we compare it to the Cramér-Rao Lower Bound and, to test the estimation time, we compare it with the Expectation Maximization algorithm, another fast Maximum Likelihood estimator. Finally, we apply our estimator to a real observation of the protoplanetary disk AS 209 made with the Submillimeter Array. We found that our proposed estimator meets the Cramér-Rao Lower Bound and it was approximately 40 times faster than the Expectation Maximization algorithm.

Synthetic data (SIM) drawn from simulators have emerged as a popular alternative for training models where acquiring annotated real-world images is difficult. However, transferring models trained on synthetic images to real-world applications can be challenging due to appearance disparities. A commonly employed solution to counter this SIM2REAL gap is unsupervised domain adaptation, where models are trained using labeled SIM data and unlabeled REAL data. Mispredictions made by such SIM2REAL adapted models are often associated with miscalibration - stemming from overconfident predictions on real data. In this paper, we introduce AUGCAL, a simple training-time patch for unsupervised adaptation that improves SIM2REAL adapted models by - (1) reducing overall miscalibration, (2) reducing overconfidence in incorrect predictions and (3) improving confidence score reliability by better guiding misclassification detection - all while retaining or improving SIM2REAL performance. Given a base SIM2REAL adaptation algorithm, at training time, AUGCAL involves replacing vanilla SIM images with strongly augmented views (AUG intervention) and additionally optimizing for a training time calibration loss on augmented SIM predictions (CAL intervention). We motivate AUGCAL using a brief analytical justification of how to reduce miscalibration on unlabeled REAL data. Through our experiments, we empirically show the efficacy of AUGCAL across multiple adaptation methods, backbones, tasks and shifts.

Model calibration is essential for ensuring that the predictions of deep neural networks accurately reflect true probabilities in real-world classification tasks. However, deep networks often produce over-confident or under-confident predictions, leading to miscalibration. Various methods have been proposed to address this issue by designing effective loss functions for calibration, such as focal loss. In this paper, we analyze its effectiveness and provide a unified loss framework of focal loss and its variants, where we mainly attribute their superiority in model calibration to the loss weighting factor that estimates sample-wise uncertainty. Based on our analysis, existing loss functions fail to achieve optimal calibration performance due to two main issues: including misalignment during optimization and insufficient precision in uncertainty estimation. Specifically, focal loss cannot align sample uncertainty with gradient scaling and the single logit cannot indicate the uncertainty. To address these issues, we reformulate the optimization from the perspective of gradients, which focuses on uncertain samples. Meanwhile, we propose using the Brier Score as the loss weight factor, which provides a more accurate uncertainty estimation via all the logits. Extensive experiments on various models and datasets demonstrate that our method achieves state-of-the-art (SOTA) performance.

Calibrated uncertainty estimates in machine learning are crucial to many fields such as autonomous vehicles, medicine, and weather and climate forecasting. While there is extensive literature on uncertainty calibration for classification, the classification findings do not always translate to regression. As a result, modern models for predicting uncertainty in regression settings typically produce uncalibrated and overconfident estimates. To address these gaps, we present a calibration method for regression settings that does not assume a particular uncertainty distribution over the error: Calibrating Regression Uncertainty Distributions Empirically (CRUDE). CRUDE makes the weaker assumption that error distributions have a constant arbitrary shape across the output space, shifted by predicted mean and scaled by predicted standard deviation. We detail a theoretical connection between CRUDE and conformal inference. Across an extensive set of regression tasks, CRUDE demonstrates consistently sharper, better calibrated, and more accurate uncertainty estimates than state-of-the-art techniques.

Video world models approximate the stochastic distribution of physical outcomes through generative sampling, but existing benchmarks score individual generations or compare distributions coarsely over a whole dataset, leaving the fine-grained aleatoric uncertainty of specific phenomena untested. We introduce CaliBench, which scores outcomes in a physically interpretable discrete space - a bin index, a die face, a suit, a colour - rather than a learned feature space such as in FID, so the distance from a known reference distribution is measured directly. We curate outcome spaces whose reference is known in closed form (binomial Galton boards, Bernoulli forks, uniform dice/cards/lottery, a skewed European-roulette colour), enabling an exact calibration test. We decompose performance into two orthogonal axes that a single accuracy metric conflates: scorability, the fraction of generations yielding a scoreable outcome, and calibration, the total variation distance from the reference on that sample. A chi-squared test assesses significance; as calibration is its null hypothesis it can evidence only miscalibration, and at N=32 per cell detects only large deviations. We apply it to nine scenes and six image-to-video models (WAN-2.7, SeeDance-2.0, HappyHorse-1.0, Veo 3.1, Runway Gen-4.5, Cosmos3-Super), 32 generations each. Models consistently concentrate probability mass on a few outcomes rather than reproducing the reference. Most scene-model combinations are significantly miscalibrated, in the extreme collapsing to one outcome, as Veo 3.1 does on dice. On roulette, generations often leave the ball ambiguously placed, giving several models low scorability. Performance varies by scene: no model dominates all nine. We release the protocol and a metric (mean normalised total variation, mnTV) for comparing new models against our results.

We present an online post-hoc calibration method, called Online Platt Scaling (OPS), which combines the Platt scaling technique with online logistic regression. We demonstrate that OPS smoothly adapts between i.i.d. and non-i.i.d. settings with distribution drift. Further, in scenarios where the best Platt scaling model is itself miscalibrated, we enhance OPS by incorporating a recently developed technique called calibeating to make it more robust. Theoretically, our resulting OPS+calibeating method is guaranteed to be calibrated for adversarial outcome sequences. Empirically, it is effective on a range of synthetic and real-world datasets, with and without distribution drifts, achieving superior performance without hyperparameter tuning. Finally, we extend all OPS ideas to the beta scaling method.

Camera-to-motion-capture (mocap) calibration is essential for using mocap as ground truth in robotics, AR/VR, and other computer vision tasks. However, the calibration can drift after deployment, while calibration residuals and visual inspection provide limited independent verification. We present Lollypop, a fiducial-mocap reference target for independent calibration verification. The target couples an ArUco fiducial with a mocap marker constellation so the visual center and tracked centroid represent the same physical point. Given a candidate calibration, verification projects the mocap point into the image and measures its disagreement with the detected fiducial center. Experiments show sub-pixel nominal error, sensitivity to controlled extrinsic perturbations, and increasing error during an illustrative mixed-handling sequence.

The fusion of LiDARs and cameras has been increasingly adopted in autonomous driving for perception tasks. The performance of such fusion-based algorithms largely depends on the accuracy of sensor calibration, which is challenging due to the difficulty of identifying common features across different data modalities. Previously, many calibration methods involved specific targets and/or manual intervention, which has proven to be cumbersome and costly. Learning-based online calibration methods have been proposed, but their performance is barely satisfactory in most cases. These methods usually suffer from issues such as sparse feature maps, unreliable cross-modality association, inaccurate calibration parameter regression, etc. In this paper, to address these issues, we propose CalibFormer, an end-to-end network for automatic LiDAR-camera calibration. We aggregate multiple layers of camera and LiDAR image features to achieve high-resolution representations. A multi-head correlation module is utilized to identify correlations between features more accurately. Lastly, we employ transformer architectures to estimate accurate calibration parameters from the correlation information. Our method achieved a mean translation error of 0.8751 cm and a mean rotation error of 0.0562 ^{circ} on the KITTI dataset, surpassing existing state-of-the-art methods and demonstrating strong robustness, accuracy, and generalization capabilities.

The "alignment tax" of post-training is typically framed as a drop in task accuracy. We show it also involves a severe loss of calibration, making models overconfident, less reliable, and model outputs less diverse. We show that this trade-off can be navigated effectively via a simple post-hoc intervention: interpolating between a model's weights before and after alignment. Crucially, this is not a strict trade-off. We find that the process consistently reveals Pareto-optimal interpolations - models that improve accuracy beyond both parents while substantially recovering the calibration lost during alignment. Our work demonstrates that simple model merging provides a computationally efficient method for mitigating the full scope of the alignment tax, yielding models that are more capable and more reliable.

We introduce a transfer learning framework for regression that leverages heterogeneous source domains to improve predictive performance in a data-scarce target domain. Our approach fits a conditional generative model to each source domain and calibrates a shared linear combination of the generated responses via conditional quantile matching at the observed target covariates. The calibration aligns the conditional response distributions while accommodating simultaneous shifts in both the covariate and conditional response distributions. The calibrated responses then serve as pseudo-labels to augment the target data for a broad class of downstream learning tasks. Theoretically, we derive an excess risk bound for an empirical risk minimizer (ERM) trained on the augmented data, separating the benefit of an enlarged training sample from errors due to density ratio estimation, source generator estimation, conditional calibration, and irreducible transfer bias. Empirically, simulations and real-data applications show that the proposed method can improve target-domain prediction when the transfer bias is small.

Existing calibration methods occasionally fail for large field-of-view cameras due to the non-linearity of the underlying problem and the lack of good initial values for all parameters of the used camera model. This might occur because a simpler projection model is assumed in an initial step, or a poor initial guess for the internal parameters is pre-defined. A lot of the difficulties of general camera calibration lie in the use of a forward projection model. We side-step these challenges by first proposing a solver to calibrate the parameters in terms of a back-projection model and then regress the parameters for a target forward model. These steps are incorporated in a robust estimation framework to cope with outlying detections. Extensive experiments demonstrate that our approach is very reliable and returns the most accurate calibration parameters as measured on the downstream task of absolute pose estimation on test sets. The code is released at https://github.com/ylochman/babelcalib.

Modern machine learning methods including deep learning have achieved great success in predictive accuracy for supervised learning tasks, but may still fall short in giving useful estimates of their predictive {\em uncertainty}. Quantifying uncertainty is especially critical in real-world settings, which often involve input distributions that are shifted from the training distribution due to a variety of factors including sample bias and non-stationarity. In such settings, well calibrated uncertainty estimates convey information about when a model's output should (or should not) be trusted. Many probabilistic deep learning methods, including Bayesian-and non-Bayesian methods, have been proposed in the literature for quantifying predictive uncertainty, but to our knowledge there has not previously been a rigorous large-scale empirical comparison of these methods under dataset shift. We present a large-scale benchmark of existing state-of-the-art methods on classification problems and investigate the effect of dataset shift on accuracy and calibration. We find that traditional post-hoc calibration does indeed fall short, as do several other previous methods. However, some methods that marginalize over models give surprisingly strong results across a broad spectrum of tasks.

By design, average precision (AP) for object detection aims to treat all classes independently: AP is computed independently per category and averaged. On one hand, this is desirable as it treats all classes equally. On the other hand, it ignores cross-category confidence calibration, a key property in real-world use cases. Unfortunately, under important conditions (i.e., large vocabulary, high instance counts) the default implementation of AP is neither category independent, nor does it directly reward properly calibrated detectors. In fact, we show that on LVIS the default implementation produces a gameable metric, where a simple, un-intuitive re-ranking policy can improve AP by a large margin. To address these limitations, we introduce two complementary metrics. First, we present a simple fix to the default AP implementation, ensuring that it is independent across categories as originally intended. We benchmark recent LVIS detection advances and find that many reported gains do not translate to improvements under our new evaluation, suggesting recent improvements may arise from difficult to interpret changes to cross-category rankings. Given the importance of reliably benchmarking cross-category rankings, we consider a pooled version of AP (AP-Pool) that rewards properly calibrated detectors by directly comparing cross-category rankings. Finally, we revisit classical approaches for calibration and find that explicitly calibrating detectors improves state-of-the-art on AP-Pool by 1.7 points

Class probabilities predicted by most multiclass classifiers are uncalibrated, often tending towards over-confidence. With neural networks, calibration can be improved by temperature scaling, a method to learn a single corrective multiplicative factor for inputs to the last softmax layer. On non-neural models the existing methods apply binary calibration in a pairwise or one-vs-rest fashion. We propose a natively multiclass calibration method applicable to classifiers from any model class, derived from Dirichlet distributions and generalising the beta calibration method from binary classification. It is easily implemented with neural nets since it is equivalent to log-transforming the uncalibrated probabilities, followed by one linear layer and softmax. Experiments demonstrate improved probabilistic predictions according to multiple measures (confidence-ECE, classwise-ECE, log-loss, Brier score) across a wide range of datasets and classifiers. Parameters of the learned Dirichlet calibration map provide insights to the biases in the uncalibrated model.

ufakzeka-karar is an open Turkish decision model with 182,494,466 parameters. Given a Turkish text and questions of a fixed answer type (a choice, a level on an ordered scale, or yes or no), it returns a temperature-scaled probability for every option and an expected error that serves as a "not sure" signal, without generating text and in one CPU forward pass for up to ten options. Built on the lab's ufakzeka-1-base, its head scores each option blind to the others at shared positions, so the answer does not depend on option order. A sequential head trained with shuffled options was about as accurate but changed 2.3 to 2.8 percent of its answers when only the option order changed; REINFORCE lost 10.2 points (0.102) of macro F1 to cross-entropy. On the open set of HakemBench v1.0 (4,275 questions, 7 tracks) the released model ranks 7th of 16 rows with a composite of 0.660 (95% interval 0.642 to 0.677). Temperature scaling lowers calibration error (smooth ECE) on the development set but raises it on held-out support questions, from 0.027 to 0.045 for the first scored run, which never trained on them; the released model later trained on them, so its 0.036 to 0.064 is not an unseen-question test. The released model is the last of three runs scored on HakemBench, and its numbers are not blind. The second run's new training data was aimed at the first run's errors on the full test set in guardrails, moderation and customer support, and the released run was trained after the second run's guardrail results on the full test set were read, under a protocol fixed in writing before any of its data, code or runs. All its numbers come after these readings; its guardrail, moderation and customer support numbers carry the flag "shaped by reading the test results". With every model scored on the other four tracks only, its composite is 0.678, 6th of 16. Weights and code are under Apache-2.0.

Quantifying the uncertainty of predictions made by large language models (LLMs) in binary text classification tasks remains a challenge. Calibration, in the context of LLMs, refers to the alignment between the model's predicted probabilities and the actual correctness of its predictions. A well-calibrated model should produce probabilities that accurately reflect the likelihood of its predictions being correct. We propose a novel approach that utilizes the inductive Venn--Abers predictor (IVAP) to calibrate the probabilities associated with the output tokens corresponding to the binary labels. Our experiments on the BoolQ dataset using the Llama 2 model demonstrate that IVAP consistently outperforms the commonly used temperature scaling method for various label token choices, achieving well-calibrated probabilities while maintaining high predictive quality. Our findings contribute to the understanding of calibration techniques for LLMs and provide a practical solution for obtaining reliable uncertainty estimates in binary question answering tasks, enhancing the interpretability and trustworthiness of LLM predictions.

Models trained on different datasets can be merged by a weighted-averaging of their parameters, but why does it work and when can it fail? Here, we connect the inaccuracy of weighted-averaging to mismatches in the gradients and propose a new uncertainty-based scheme to improve the performance by reducing the mismatch. The connection also reveals implicit assumptions in other schemes such as averaging, task arithmetic, and Fisher-weighted averaging. Our new method gives consistent improvements for large language models and vision transformers, both in terms of performance and robustness to hyperparameters.

Modern deep neural networks can achieve high accuracy when the training distribution and test distribution are identically distributed, but this assumption is frequently violated in practice. When the train and test distributions are mismatched, accuracy can plummet. Currently there are few techniques that improve robustness to unforeseen data shifts encountered during deployment. In this work, we propose a technique to improve the robustness and uncertainty estimates of image classifiers. We propose AugMix, a data processing technique that is simple to implement, adds limited computational overhead, and helps models withstand unforeseen corruptions. AugMix significantly improves robustness and uncertainty measures on challenging image classification benchmarks, closing the gap between previous methods and the best possible performance in some cases by more than half.

We address the problem of network calibration adjusting miscalibrated confidences of deep neural networks. Many approaches to network calibration adopt a regularization-based method that exploits a regularization term to smooth the miscalibrated confidences. Although these approaches have shown the effectiveness on calibrating the networks, there is still a lack of understanding on the underlying principles of regularization in terms of network calibration. We present in this paper an in-depth analysis of existing regularization-based methods, providing a better understanding on how they affect to network calibration. Specifically, we have observed that 1) the regularization-based methods can be interpreted as variants of label smoothing, and 2) they do not always behave desirably. Based on the analysis, we introduce a novel loss function, dubbed ACLS, that unifies the merits of existing regularization methods, while avoiding the limitations. We show extensive experimental results for image classification and semantic segmentation on standard benchmarks, including CIFAR10, Tiny-ImageNet, ImageNet, and PASCAL VOC, demonstrating the effectiveness of our loss function.

Post-Training Quantization (PTQ) has received significant attention because it requires only a small set of calibration data to quantize a full-precision model, which is more practical in real-world applications in which full access to a large training set is not available. However, it often leads to overfitting on the small calibration dataset. Several methods have been proposed to address this issue, yet they still rely on only the calibration set for the quantization and they do not validate the quantized model due to the lack of a validation set. In this work, we propose a novel meta-learning based approach to enhance the performance of post-training quantization. Specifically, to mitigate the overfitting problem, instead of only training the quantized model using the original calibration set without any validation during the learning process as in previous PTQ works, in our approach, we both train and validate the quantized model using two different sets of images. In particular, we propose a meta-learning based approach to jointly optimize a transformation network and a quantized model through bi-level optimization. The transformation network modifies the original calibration data and the modified data will be used as the training set to learn the quantized model with the objective that the quantized model achieves a good performance on the original calibration data. Extensive experiments on the widely used ImageNet dataset with different neural network architectures demonstrate that our approach outperforms the state-of-the-art PTQ methods.

Motivated by the theoretical interest in reconstructing long 3D trajectories of individual birds in large flocks, we developed CoMo, a co-moving camera system of two synchronized high speed cameras coupled with rotational stages, which allow us to dynamically follow the motion of a target flock. With the rotation of the cameras we overcome the limitations of standard static systems that restrict the duration of the collected data to the short interval of time in which targets are in the cameras common field of view, but at the same time we change in time the external parameters of the system, which have then to be calibrated frame-by-frame. We address the calibration of the external parameters measuring the position of the cameras and their three angles of yaw, pitch and roll in the system "home" configuration (rotational stage at an angle equal to 0deg and combining this static information with the time dependent rotation due to the stages. We evaluate the robustness and accuracy of the system by comparing reconstructed and measured 3D distances in what we call 3D tests, which show a relative error of the order of 1%. The novelty of the work presented in this paper is not only on the system itself, but also on the approach we use in the tests, which we show to be a very powerful tool in detecting and fixing calibration inaccuracies and that, for this reason, may be relevant for a broad audience.

Reliable usage of object detectors require them to be calibrated -- a crucial problem that requires careful attention. Recent approaches towards this involve (1) designing new loss functions to obtain calibrated detectors by training them from scratch, and (2) post-hoc Temperature Scaling (TS) that learns to scale the likelihood of a trained detector to output calibrated predictions. These approaches are then evaluated based on a combination of Detection Expected Calibration Error (D-ECE) and Average Precision. In this work, via extensive analysis and insights, we highlight that these recent evaluation frameworks, evaluation metrics, and the use of TS have notable drawbacks leading to incorrect conclusions. As a step towards fixing these issues, we propose a principled evaluation framework to jointly measure calibration and accuracy of object detectors. We also tailor efficient and easy-to-use post-hoc calibration approaches such as Platt Scaling and Isotonic Regression specifically for object detection task. Contrary to the common notion, our experiments show that once designed and evaluated properly, post-hoc calibrators, which are extremely cheap to build and use, are much more powerful and effective than the recent train-time calibration methods. To illustrate, D-DETR with our post-hoc Isotonic Regression calibrator outperforms the recent train-time state-of-the-art calibration method Cal-DETR by more than 7 D-ECE on the COCO dataset. Additionally, we propose improved versions of the recently proposed Localization-aware ECE and show the efficacy of our method on these metrics as well. Code is available at: https://github.com/fiveai/detection_calibration.

As language models improve and become increasingly deployed to solve a variety of tasks, trustworthiness becomes essential. Calibration is a good proxy for trust: well-calibrated confidence estimates help inform the risk versus reward tradeoff when trusting a specific model output. Unfortunately, even as models improve, they remain poorly calibrated, often biasing towards overconfidence. Additionally, calibration can be gamed: a policy that always predicts the base rate is perfectly calibrated, but completely uninformative. To resolve this, we develop a new metric, expected utility renormalized by the oracle (EURO), that balances calibration and informativeness. We also propose a general-purpose activation-based confidence, utility, and trust estimation protocol (ACUTE) to appropriately adjudicate uncertainty. The ACUTE protocol provides flexible, sample-efficient, and compute-efficient confidence estimators for 3 tasks including multiple choice question answering, tool-calling, and scientific document summarization across 6 models from 4 model families. ACUTE outperforms strong baselines on EURO, while maintaining low calibration error. Taken together, our work shows that equipping LLMs with the ACUTE protocol can improve calibration, utility, and trustworthiness in numerous settings.

Stereoscopic videos can contain color mismatches between the left and right views due to minor variations in camera settings, lenses, and even object reflections captured from different positions. The presence of color mismatches can lead to viewer discomfort and headaches. This problem can be solved by transferring color between stereoscopic views, but traditional methods often lack quality, while neural-network-based methods can easily overfit on artificial data. The scarcity of stereoscopic videos with real-world color mismatches hinders the evaluation of different methods' performance. Therefore, we filmed a video dataset, which includes both distorted frames with color mismatches and ground-truth data, using a beam-splitter. Our second contribution is a deep multiscale neural network that solves the color-mismatch-correction task by leveraging stereo correspondences. The experimental results demonstrate the effectiveness of the proposed method on a conventional dataset, but there remains room for improvement on challenging real-world data.

Single-prompt accuracy is the dominant way to benchmark language models, but it can miss reliability failures that matter. We evaluate a 15-model open-weight corpus, with the main reliability analyses focused on 10 instruct models across five classification and reasoning benchmarks under five prompt variants each, measuring accuracy, token-probability calibration, verbal-confidence calibration, verbal parse rate, and prompt-perturbation spread for every (model x dataset x variant) cell. We find three broad results. First, evaluation design can materially change the conclusion. Switching Expected Calibration Error (ECE) token from a raw to a label-set-normalised definition changes per-cell calibration by a mean absolute 0.149. More strikingly, pairing a chain-of-thought prompt with a first-character evaluator on ARC-Challenge reduces apparent accuracy by 72-88% across all five primary models; two independent repair procedures recover 93.8% and 102.7% of the lost performance, indicating an evaluator-side rather than model-side failure. Second, confidence signals are fragile. On MMLU-Pro, every primary model verbally reports confidence substantially above both its accuracy and its token-probability confidence on the same rows, and verbal parse rate can collapse for a single model on a single prompt variant. Third, prompt robustness does not track parameter count reliably. Across 10 instruct models, the correlation between model size and prompt-perturbation spread ranges from -0.244 to 0.474 across benchmarks. Taken together, these results show that reliability conclusions for small language models depend not only on the model being evaluated, but also on the evaluation pipeline used to measure it. We argue that calibration definitions, evaluator logic, verbal parseability, and prompt robustness should be reported explicitly when making reliability claims.

We consider whether off-policy experience from a smaller, weaker model can elicit capability in a stronger learner that on-policy RL fine-tuning (e.g., GRPO) does not reach. We find that injecting mathematically wrong drafts from a smaller but more domain-trained model -- mismatched to the current problem -- into a stronger learner's GRPO context consistently outperforms standard on-policy GRPO on held-out MATH-500 and out-of-distribution AIME 2025/2026. Concretely, we use Mathstral-7B as the learner, Qwen2.5-Math-1.5B as the draft model, 8.8K Level 3--5 MATH problems (with MATH-500 held out), and train with Dr. GRPO. Mismatch is an active ingredient: shuffling drafts to mismatched problems while holding everything else constant yields +1.62pp on MATH-500 (greedy pass@1) over the matched-wrong variant (n=10 seeds, p=0.0015, Welch's t). In fact, the mismatched-wrong variant leads all other variants we tested on MATH-500 across both greedy pass@1 and sampling pass@k. On out-of-distribution AIME 2025 and 2026, the mismatched-wrong variant uniquely lifts pass@k above both Mathstral-7B (in its native [INST] format) and the Qwen2.5-Math-1.5B draft model at every sample budget from k=1 to k=1024 across 2 seeds (+14.2pp on 2025 and +9.0pp on 2026 at pass@1024 over Mathstral-7B), and at pass@1024 also leads no-draft, matched-wrong, and mismatched-correct variants on both years. All variants use the same prompt with no draft injection at test time. The recipe -- trained on a single GPU with no SFT, no reward models, no synthesized data, and no produce-critique-revise inner loop -- reaches 71.98% MATH-500 on Mathstral-7B-v0.1, the highest published result on this model to our knowledge, surpassing the heavier WizardMath pipeline at 70.9% on full MATH (SFT + PPO with process/instruction reward models).

Complete orthogonal predictive coordinates do not by themselves bind a latent direction to a named intervention. We present a mathematical and synthetic audit motivated by vascular device-vessel suitcordance. Capacity-matched least-squares predictors were exactly equivalent under complete fixed output transforms, whereas an anchor-only observer recovered interpretations only within the span of known perturbation signatures. Six three-dimensional configurations across 64 seeds gave a maximum paired prediction discrepancy of 6.7e-15 but a median untransported edit error of 1.513. Coordinate transport removed that error. Noisy and weak anchors constrained calibration stability, and changing the representation basis required recalibration or verified transport. Across 256 additional fits in dimensions 3-24, prediction equivalence persisted within 4.0e-15. We then evaluated nine deliberate runnable fault classes across 64 seeds. All 576 faulty executions completed, but each violated at least one reconstruction, prediction, delivered-edit or scope contract; all 320 valid control records passed. Repeating a faulty implementation gave exact self-agreement despite error against the separately computed simulator expectation. For one omitted-direction defect, probe coverage followed its analytic law, and rank-aware abstention protected unsupported interpretations. Scalar-noise experiments exposed both missed weak faults and excessive rejection under narrow relative tolerances. These controls provide an executable separation of prediction, semantic support and scientific acceptance. They are synthetic numerical audits, not clinical validation, neural JEPA-Anything replication, agent learning or patient treatment-effect estimation.

RAG systems are increasingly used to summarize what large collections of documents say. A user asks "What do people think about X?" and receives an answer that reads as consensus. But standard top-k retrieval ranks documents by query similarity, not by how faithfully they represent the population, so minority views quietly disappear. Existing fixes fall short. Diversity re-rankers like MMR and DPP spread retrieved documents apart, but with no target distribution to aim for. Calibration methods based on KL or JS divergence do target one, yet treat opinion bins as unordered: confusing strong positive with strong negative costs no more than an adjacent-bin miss. We introduce WARP, a family of post-retrieval algorithms that calibrate retrieved evidence to the population's opinion distribution. WARP first recovers underrepresented opinions that cosine ranking may bury, then uses Wasserstein-1 distance to select documents whose sentiment-intensity distribution matches the population target, capturing the ordinal structure ignored by KL and JS divergence. We develop three variants for dense, sparse, and variable candidate pools, trading off calibration quality and speed. Across three review domains spanning 35K documents, 156 queries, and 26 entities, WARP's domain-matched variants reduce distributional error by at least 43% with sub-second latency. These gains carry through to generation: a five-judge LLM panel prefers WARP-generated answers in 86% of decided comparisons at k <= 5.

Model-based reinforcement learning (MBRL) has been shown to be a powerful framework for data-efficiently learning control of continuous tasks. Recent work in MBRL has mostly focused on using more advanced function approximators and planning schemes, with little development of the general framework. In this paper, we identify a fundamental issue of the standard MBRL framework -- what we call the objective mismatch issue. Objective mismatch arises when one objective is optimized in the hope that a second, often uncorrelated, metric will also be optimized. In the context of MBRL, we characterize the objective mismatch between training the forward dynamics model w.r.t.~the likelihood of the one-step ahead prediction, and the overall goal of improving performance on a downstream control task. For example, this issue can emerge with the realization that dynamics models effective for a specific task do not necessarily need to be globally accurate, and vice versa globally accurate models might not be sufficiently accurate locally to obtain good control performance on a specific task. In our experiments, we study this objective mismatch issue and demonstrate that the likelihood of one-step ahead predictions is not always correlated with control performance. This observation highlights a critical limitation in the MBRL framework which will require further research to be fully understood and addressed. We propose an initial method to mitigate the mismatch issue by re-weighting dynamics model training. Building on it, we conclude with a discussion about other potential directions of research for addressing this issue.

Muon has emerged as an efficient alternative to Adam for pretraining, yet remains underused for fine-tuning. A key obstacle is that most open models are pretrained with Adam, and naively switching to Muon for fine-tuning leads to degraded performance due to an optimizer mismatch. We investigate this mismatch through controlled experiments and relate it to the distinct implicit biases of Adam and Muon. We provide evidence that the mismatch disrupts pretrained knowledge, and that this disruption scales with update strength. This leads us to hypothesize that constraining updates should mitigate the mismatch. We validate this with LoRA: across language and vision tasks, LoRA reduces the performance gap between Adam and Muon observed under full fine-tuning. Studies on LoRA rank, catastrophic forgetting, and LoRA variants further confirm that mismatch severity correlates with update strength. These results shed light on how optimizer mismatch affects fine-tuning and how it can be mitigated. Our code is available at https://github.com/XingyuQu/muon-finetune.

While test-time scaling has enabled large language models to solve highly difficult tasks, state-of-the-art results come at exorbitant compute costs. These inefficiencies can be attributed to the miscalibration of post-trained language models, and the lack of calibration in popular sampling techniques. Here, we present Online Reasoning Calibration (ORCA), a framework for calibrating the sampling process that draws upon conformal prediction and test-time training. Specifically, we introduce a meta-learning procedure that updates the calibration module for each input. This allows us to provide valid confidence estimates under distributional shift, e.g. in thought patterns that occur across different stages of reasoning, or in prompt distributions between model development and deployment. ORCA not only provides theoretical guarantees on conformal risks, but also empirically shows higher efficiency and generalization across different reasoning tasks. At risk level δ=0.1, ORCA improves Qwen2.5-32B efficiency on in-distribution tasks with savings up to 47.5% with supervised labels and 40.7% with self-consistency labels. Under zero-shot out-of-domain settings, it improves MATH-500 savings from 24.8% of the static calibration baseline to 67.0% while maintaining a low empirical error rate, and the same trend holds across model families and downstream benchmarks. Our code is publicly available at https://github.com/wzekai99/ORCA.

Model overconfidence and poor calibration are common in machine learning and difficult to account for when applying standard empirical risk minimization. In this work, we propose a novel method to alleviate these problems that we call odd-k-out learning (OKO), which minimizes the cross-entropy error for sets rather than for single examples. This naturally allows the model to capture correlations across data examples and achieves both better accuracy and calibration, especially in limited training data and class-imbalanced regimes. Perhaps surprisingly, OKO often yields better calibration even when training with hard labels and dropping any additional calibration parameter tuning, such as temperature scaling. We demonstrate this in extensive experimental analyses and provide a mathematical theory to interpret our findings. We emphasize that OKO is a general framework that can be easily adapted to many settings and a trained model can be applied to single examples at inference time, without significant run-time overhead or architecture changes.

When a real-world scene is captured by a smartphone camera and viewed on its screen, the displayed image often differs noticeably from the original scene in color, brightness, and contrast. This gap persists despite substantial advances in both modern cameras and displays. A key reason is that most pipelines factor the high-dimensional capture-to-display process into two separately calibrated camera and display stages, and then connect them through low-dimensional color transforms, leading to information bottlenecks and inevitable error accumulation. To address this systemic challenge, we propose Color Pass-Through, an end-to-end learned framework that operates directly on captured images. Our key insight is to treat the camera and display as a coupled system rather than calibrating them in isolation. Coupling the camera and display yields two practical advantages: (1) it brings the entire real-world scenes to the display via end-to-end optimization, and (2) it allows efficient one-step calibration for each distinct observer via complete capture-to-display path. We validate Color Pass-Through using both digital and human observers. Compared with representative baselines, our method achieves an average gain of +2.0 points on a 5-point user study and more than 2x improvement on quantitative metrics, demonstrating improved reproduction of the perceived color of the original scene.

Claims that language models homogenise are usually measured against human judgements collected for the study, which makes the human side an artifact of the design: a crowdworker given the model's instruction is running the model's prompt. We measure convergence against a human reference nobody built for the purpose -- 2,523 reader mark sets across 120 web documents, produced by people highlighting for their own reasons on a platform where the overlay of others' marks is off by default. Agreement is the overlap between two size-matched sentence sets minus the overlap expected when each is resampled within its own depth-and-length bands. The null's calibration is demonstrated, not asserted: every pair involving a random baseline lands within 0.006 of zero. On the median document each party names 14 sentences of 70; two readers share 4.1 and two models 8.7. Across 18 model arms spanning 11 vendors, 3 countries and both weight regimes, the median of 153 model pairs is +0.093 against a human yardstick of +0.040, and 99 sit entirely above the human interval. Two frontier models from rival labs reach +0.203, twice what GPT-4o agrees with itself on a second call. The effect is not determinism, prompt wording, procedure, vendor or routing, and it is graded: the smallest models agree at the human level. No model agrees with readers detectably more than a reader does, and at equal depth and length no surface feature separates their choices. The multiples are procedure-dependent and the ordering is not: models are cut to their sharpest set while a reader's is a random draw from what they marked, and blunting the models alike halves the gap without closing it. Tested out of sample on four models released after this analysis, against predictions fixed beforehand, none clears the human interval. A population simulated from several models is not several populations.

Improving out-of-distribution (OOD) generalization during in-distribution (ID) adaptation is a primary goal of robust fine-tuning of zero-shot models beyond naive fine-tuning. However, despite decent OOD generalization performance from recent robust fine-tuning methods, confidence calibration for reliable model output has not been fully addressed. This work proposes a robust fine-tuning method that improves both OOD accuracy and confidence calibration simultaneously in vision language models. Firstly, we show that both OOD classification and OOD calibration errors have a shared upper bound consisting of two terms of ID data: 1) ID calibration error and 2) the smallest singular value of the ID input covariance matrix. Based on this insight, we design a novel framework that conducts fine-tuning with a constrained multimodal contrastive loss enforcing a larger smallest singular value, which is further guided by the self-distillation of a moving-averaged model to achieve calibrated prediction as well. Starting from empirical evidence supporting our theoretical statements, we provide extensive experimental results on ImageNet distribution shift benchmarks that demonstrate the effectiveness of our theorem and its practical implementation.

Machine learning models are widely used, but can also often be wrong. Users would benefit from a reliable indication of whether a given output from a given model should be trusted, so a rational decision can be made whether to use the output or not. For example, outputs can be associated with a confidence measure; if this confidence measure is strongly associated with likelihood of correctness, then the model is said to be well-calibrated. A well-calibrated confidence measure can serve as a basis for rational, graduated decision-making on how much review and care is needed when using generated code. Calibration has so far been studied in mostly non-generative (e.g. classification) settings, especially in software engineering. However, generated code can quite often be wrong: Given generated code, developers must decide whether to use directly, use after varying intensity of careful review, or discard model-generated code. Thus, calibration is vital in generative settings. We make several contributions. We develop a framework for evaluating the calibration of code-generating models. We consider several tasks, correctness criteria, datasets, and approaches, and find that, by and large, generative code models we test are not well-calibrated out of the box. We then show how calibration can be improved using standard methods, such as Platt scaling. Since Platt scaling relies on the prior availability of correctness data, we evaluate the applicability and generalizability of Platt scaling in software engineering, discuss settings where it has good potential for practical use, and settings where it does not. Our contributions will lead to better-calibrated decision-making in the current use of code generated by language models, and offers a framework for future research to further improve calibration methods for generative models in software engineering.

Continuous monitoring of generative AI systems requires detecting distribution shifts in the unstructured data they ingest and generate. Existing monitoring methods typically control false alarms by requiring the discrepancy measure used to detect shifts to be *pre-specified*. However, for unstructured data, pre-specification creates a sensitivity--breadth trade-off: a narrowly defined measure is sensitive to the anticipated shift but may miss unexpected changes, whereas a broadly defined measure may detect a wider range of shifts but with reduced sensitivity. Although adaptively hypothesizing the shift direction can overcome this limitation, such data-dependent adaptation generally invalidates conventional false-alarm guarantees. We reconcile adaptivity with statistical validity through testing-by-betting, reframing sequential changepoint detection as a betting game in which the bettor continually updates its hypothesized shift direction, or witness function, as new observations arrive. We introduce *asymptotic e-detectors*, which approximate the pre-change distribution using a calibration set of size m, and prove that they asymptotically control the average run length to a false alarm as m increases. Empirically, calibration sets as small as m=30 provide effective control. We then develop adaptive monitoring strategies ranging from black-box bettors that learn from embeddings to interpretable bettors based on LLM-proposed concepts. Across three real-world datasets, including data from a clinical AI scribe deployment, adaptive monitors detect shifts faster than fixed monitors at the same false-alarm level. Further, when the true shifts are sparse and interpretable, LLM-concept monitors provide the fastest and most interpretable detection, while also guiding root-cause diagnosis for complex shifts.

We present Midicoth, a lossless compression system that introduces a micro-diffusion denoising layer for improving probability estimates produced by adaptive statistical models. In compressors such as Prediction by Partial Matching (PPM), probability estimates are smoothed by a prior to handle sparse observations. When contexts have been seen only a few times, this prior dominates the prediction and produces distributions that are significantly flatter than the true source distribution, leading to compression inefficiency. Midicoth addresses this limitation by treating prior smoothing as a shrinkage process and applying a reverse denoising step that corrects predicted probabilities using empirical calibration statistics. To make this correction data-efficient, the method decomposes each byte prediction into a hierarchy of binary decisions along a bitwise tree. This converts a single 256-way calibration problem into a sequence of binary calibration tasks, enabling reliable estimation of correction terms from relatively small numbers of observations. The denoising process is applied in multiple successive steps, allowing each stage to refine residual prediction errors left by the previous one. The micro-diffusion layer operates as a lightweight post-blend calibration stage applied after all model predictions have been combined, allowing it to correct systematic biases in the final probability distribution. Midicoth combines five fully online components: an adaptive PPM model, a long-range match model, a trie-based word model, a high-order context model, and the micro-diffusion denoiser applied as the final stage.

This paper provides an experimentally verified formal law for calculating the uplift that diversity of thought provides in Large Language Model (LLM) ensembles. From first principles, we derive an exact decomposition of LLM ensemble lift into rescue and damage masses, which yields a compact heuristic for calculating uplift. From this we extract the metrics which predict ensemble performance: an accuracy adjusted correctness correlation, ϕ_{adj}, together with the accuracy gap and collective accuracy of the pair. We test the law on 767,520 inferences from ten open-weight models over two graduate-level science benchmarks, together with a novel agentic cybersecurity benchmark in which each model conducts digital-forensics investigations by multi-turn tool use in a network-isolated sandbox (23,520 graded trials including abstentions); all votes are released openly. Calibrated once on SuperGPQA at a 40:60 vote split, the heuristic predicts lift on the calibration set with Spearman's ρ=0.84 and, with its coefficients frozen, transfers to two datasets never used in calibration (ρ=0.51 on GPQA Diamond and 0.84 on the forensic tasks), whilst the measured swap mass tracks realised lift with R^2ge 0.96 throughout. Raw ϕ has almost no predictive power (R^2le 0.09 throughout); the accuracy-adjusted ϕ_{adj} is markedly superior (R^2=0.67 on SuperGPQA), and the heuristic combining these metrics is the most stable pre pooling predictor across the three datasets.

Methods based on weight compensation, which iteratively apply quantization and weight compensation to minimize the output error, have recently demonstrated remarkable success in quantizing Large Language Models (LLMs). The representative work, GPTQ, introduces several key techniques that make such iterative methods practical for LLMs with billions of parameters. GPTAQ extends this approach by introducing an asymmetric calibration process that aligns the output of each quantized layer with its full-precision counterpart, incorporating a residual error into the weight compensation framework. In this work, we revisit the formulation of the residual error. We identify a sub-optimal calibration objective in existing methods: during the intra-layer calibration process, they align the quantized output with the output from compensated weights, rather than the true output from the original full-precision model. Therefore, we redefine the objective to precisely align the quantized model's output with the original output of the full-precision model at each step. We then reveal that the residual error originates not only from the output difference of the preceding layer but also from the discrepancy between the compensated and original weights within each layer, which we name the 'compensation-aware error'. By inheriting the neuron decomposition technique from GPTAQ, we can efficiently incorporate this compensation-aware error into the weight update process. Extensive experiments on various LLMs and quantization settings demonstrate that our proposed enhancements integrate seamlessly with both GPTQ and GPTAQ, significantly improving their quantization performance. Our code is publicly available at https://github.com/list0830/ResComp.

Due to depth ambiguities and occlusions, lifting 2D poses to 3D is a highly ill-posed problem. Well-calibrated distributions of possible poses can make these ambiguities explicit and preserve the resulting uncertainty for downstream tasks. This study shows that previous attempts, which account for these ambiguities via multiple hypotheses generation, produce miscalibrated distributions. We identify that miscalibration can be attributed to the use of sample-based metrics such as minMPJPE. In a series of simulations, we show that minimizing minMPJPE, as commonly done, should converge to the correct mean prediction. However, it fails to correctly capture the uncertainty, thus resulting in a miscalibrated distribution. To mitigate this problem, we propose an accurate and well-calibrated model called Conditional Graph Normalizing Flow (cGNFs). Our model is structured such that a single cGNF can estimate both conditional and marginal densities within the same model - effectively solving a zero-shot density estimation problem. We evaluate cGNF on the Human~3.6M dataset and show that cGNF provides a well-calibrated distribution estimate while being close to state-of-the-art in terms of overall minMPJPE. Furthermore, cGNF outperforms previous methods on occluded joints while it remains well-calibrated.

We study estimation and clustering in Gaussian mixture models under variance misspecification. Observations are generated with true variance σ^2, while the component means are estimated using a likelihood with variance τ^2, yielding a family of mismatched likelihood functions parameterized by the ratio ρ=τ/σ. We show that the interplay between ρ and the signal-to-noise ratio (SNR) induces a sharp phase diagram. Under correct specification (ρ=1), maximum likelihood recovers the true means, independently of the SNR. However, once the model is misspecified, two different regimes emerge. Under under-smoothing (ρ<1), the estimated Gaussian means are displaced from the truth, and in low SNR this discrepancy grows as the SNR decreases: for every fixed ρ<1, the squared error scales as SNR^{-1}. Under over-smoothing (ρ>1), the fitted likelihood blurs the cluster separation, causing distinct component means to collapse towards the overall mixture center once ρ^2 exceeds a threshold of the form 1 + λ,SNR, where λ depends on the geometry of the true means. We further show that the hard assignment objective arises as the limit τto 0 of the same mismatched likelihood family, and derive corresponding low- and high-SNR results for hard-assignment mean estimation and latent-label recovery. Furthermore, in low SNR, Bayes-optimal clustering is close to random guessing, and the hard-assignment target remains far from the true means. These results show that in low-SNR applications, even mild variance misspecification or hard-assignment procedures can induce substantial bias, whereas in high SNR these effects are largely absent.

Graph-augmented retrieval combines dense similarity with graph-based relevance signals such as Personalized PageRank (PPR), but these scores have different distributions and are not directly comparable. We study this as a score calibration problem for heterogeneous retrieval fusion in multi-hop question answering. Our method, PhaseGraph, maps vector and graph scores to a common unit-free scale using percentile-rank normalization (PIT) before fusion, enabling stable combination without discarding magnitude information. Across MuSiQue and 2WikiMultiHopQA, calibrated fusion improves held-out last-hop retrieval on HippoRAG2-style benchmarks: LastHop@5 increases from 75.1% to 76.5% on MuSiQue (8W/1L, p=0.039) and from 51.7% to 53.6% on 2WikiMultiHopQA (11W/2L, p=0.023), both on independent held-out test splits. A theory-driven ablation shows that percentile-based calibration is directionally more robust than min-max normalization on both tune and test splits (1W/6L, p=0.125), while Boltzmann weighting performs comparably to linear fusion after calibration (0W/3L, p=0.25). These results suggest that score commensuration is a robust design choice, and the exact post-calibration operator appears to matter less on these benchmarks.

Low-precision Transformer systems increasingly quantize attention matrix multiplications, while softmax often remains at higher precision. During pretraining, an approximate softmax changes the gradients that train the model as well as its forward computation. We study this interaction with K-interval attention, which approximates the exponential using K+1 grid values. We vary per-row grid calibration, interpolation versus hard rounding, and the placement of a straight-through surrogate relative to normalization. We derive the corresponding backward rules, including calibration derivatives, and compare these choices in pretraining experiments matched on model, data, and optimizer. Detaching the row extrema leaves the forward computation unchanged but produces a delayed increase in validation loss. With hard rounding at K=4, min-max calibration and a pre-normalization surrogate incur a large loss gap; changing either choice substantially reduces it. At 124M parameters and 2.5B training tokens, fixed-window calibration with a post-normalization surrogate yields a validation loss gap of +0.019 nats relative to softmax at K=4, and with a pre-normalization surrogate yields +0.004 nats at K=16.

We study the connection between multicalibration and boosting for squared error regression. First we prove a useful characterization of multicalibration in terms of a ``swap regret'' like condition on squared error. Using this characterization, we give an exceedingly simple algorithm that can be analyzed both as a boosting algorithm for regression and as a multicalibration algorithm for a class H that makes use only of a standard squared error regression oracle for H. We give a weak learning assumption on H that ensures convergence to Bayes optimality without the need to make any realizability assumptions -- giving us an agnostic boosting algorithm for regression. We then show that our weak learning assumption on H is both necessary and sufficient for multicalibration with respect to H to imply Bayes optimality. We also show that if H satisfies our weak learning condition relative to another class C then multicalibration with respect to H implies multicalibration with respect to C. Finally we investigate the empirical performance of our algorithm experimentally using an open source implementation that we make available. Our code repository can be found at https://github.com/Declancharrison/Level-Set-Boosting.

Decision models return probabilities over supplied options, but a deployed agent may also need to reply in words. The present study introduces System X, a large language model (LLM) decision model that adds a text-reply option to the LLM-as-Jev readout. When this option wins, or confidence is low, the same model continues from the decision's key-value (KV) cache, avoiding a repeated prompt prefill. Qwen3-0.6B has been fine-tuned with LoRA on Reason-9k and Bitext reply rows. JevBench accuracy shows no statistically significant change (55.4% to 54.5%, p=0.87), while expected calibration error falls from 0.292 to 0.169. Held-out Bitext routing accuracy reaches 98.3%. Cache reuse saves 15-37% of latency on an Apple M4 Pro, with token-identical replies in the FP32 demonstration cases. Scoring options on copies of the prompt cache matches full-sequence scoring to within 1.4e-6 in probability. Adding dialogue, industry and complaint data (System X+) improves support-task results but lowers IFEval accuracy from 55.5% to 45.0%. System X v4 uses Qwen3-1.7B, rebalanced data and teacher-rewritten reply targets. Against its base LLM, JevBench accuracy rises from 55.0% to 61.0% (p=0.04), with no statistically significant IFEval change (p=0.71). A matched latency test on unadapted Qwen3-1.7B saves 17-39%. One LLM judge prefers v4 replies to an unadapted 1.7B second call (31 to 11 pairs, p=0.003); the other's preference is not significant. These reply comparisons also differ in prompts and generation limits. State conflicts and unsupported reply details remain failure modes. Further studies with several seeds, human raters and real support data are recommended.

Following the standard supervised fine-tuning (SFT) paradigm, in-context learning (ICL) has become an efficient approach propelled by the recent advancements in large language models (LLMs), yielding promising performance across various tasks in few-shot data setups. However, both paradigms are prone to suffer from the critical problem of overconfidence (i.e., miscalibration), especially in such limited data setups. In this work, we deliver an in-depth analysis of the behavior across different choices of learning methods from the perspective of both performance and calibration, as well as their interplay. Through extensive controlled experiments, we find that simultaneous gains for both task performance and calibration are difficult to achieve, and the problem of miscalibration exists across all learning methods in low-resource scenarios. To address this challenging trade-off between performance and calibration, we then investigate the potential of self-ensembling techniques applied at different modeling stages (e.g., variations of in-context examples or variations in prompts or different ensembling strategies). We justify the feasibility of self-ensembling on SFT in addition to ICL, to make the predictions more calibrated and have comparable or even better performance. Our work sheds light on which learning paradigm to choose and how to enhance both task performance and calibration of LLMs.

Systematic reviewers who use a model to read randomized trials need each answer and a measure of how far to trust it. If the model is calibrated, so that its stated probabilities match how often it is right, a reviewer can accept its confident answers and check the rest by hand. This paper fine-tunes Qwen3-4B-Base with low-rank adapters and a classification head for evidence inference (Lehman et al., 2019; DeYoung et al., 2020): given a trial's article and a prompt that names an intervention, a comparator and an outcome, classify the result as a significant increase, a significant decrease or no significant difference. The articles of Evidence Inference 2.0 come from the open-access subset of PubMed Central, which includes articles under non-commercial and no-derivatives licenses, so the released model was fine-tuned only on the 1,431 of 2,657 training articles under CC BY, CC0 or the public domain; it is released under the Apache License 2.0 and runs on a laptop. On the test split, its expected calibration error is 0.017 and its log loss is lower than that of Gemma 4 31B-it given the same input zero-shot, meeting criteria registered on the Open Science Framework before testing. Its macro-F1, 0.925, is above every published result on that split that I found, though those systems used other inputs, scoring rules and prompt filters, and the test labels are public. Accepting its 80 percent most confident answers leaves an error rate of 2.6 percent among them. Context ablations show that the answers depend on the article, but the title alone carries some signal, which an informative title or recall of the trial could explain.

Real-world large-scale datasets are both noisily labeled and class-imbalanced. The issues seriously hurt the generalization of trained models. It is hence significant to address the simultaneous incorrect labeling and class-imbalance, i.e., the problem of learning with noisy labels on long-tailed data. Previous works develop several methods for the problem. However, they always rely on strong assumptions that are invalid or hard to be checked in practice. In this paper, to handle the problem and address the limitations of prior works, we propose a representation calibration method RCAL. Specifically, RCAL works with the representations extracted by unsupervised contrastive learning. We assume that without incorrect labeling and class imbalance, the representations of instances in each class conform to a multivariate Gaussian distribution, which is much milder and easier to be checked. Based on the assumption, we recover underlying representation distributions from polluted ones resulting from mislabeled and class-imbalanced data. Additional data points are then sampled from the recovered distributions to help generalization. Moreover, during classifier training, representation learning takes advantage of representation robustness brought by contrastive learning, which further improves the classifier performance. We derive theoretical results to discuss the effectiveness of our representation calibration. Experiments on multiple benchmarks justify our claims and confirm the superiority of the proposed method.

Training terminal agents requires executable and verifiable tasks that are not merely solvable, but appropriately challenging for learning. Executable validation establishes feasibility, yet does not reveal how a task behaves relative to a given solver setting. In this paper, we present CalibForge, an autonomous terminal-task synthesis system that uses verified solver behavior to revise candidate tasks through adversarial solver calibration. Multi-solver calibration targets disagreement within a heterogeneous solver pool, whereas contrastive solver calibration targets a designated strong-pass/weak-fail relation; both operationalize a solver-relative learnable zone anchored in demonstrated solvability. Using CalibForge, we construct 5,431 calibrated terminal tasks. Our ablations show that both strategies yield more effective supervision than authoring and validation alone or ordinary single-solver feedback. Models trained on the full collection achieve 32.58% and 47.57% on Terminal-Bench 2.0. The largest improvements over the corresponding base model reach 24.71 percentage points on Terminal-Bench 2.0, 27.68 points on SWE-bench Pro, and 30.04 points on Doc2Repo. Together, these results support solver-relative learnability as a practical target for constructing effective and transferable agent training data.

Many existing conditional score-based data generation methods utilize Bayes' theorem to decompose the gradients of a log posterior density into a mixture of scores. These methods facilitate the training procedure of conditional score models, as a mixture of scores can be separately estimated using a score model and a classifier. However, our analysis indicates that the training objectives for the classifier in these methods may lead to a serious score mismatch issue, which corresponds to the situation that the estimated scores deviate from the true ones. Such an issue causes the samples to be misled by the deviated scores during the diffusion process, resulting in a degraded sampling quality. To resolve it, we formulate a novel training objective, called Denoising Likelihood Score Matching (DLSM) loss, for the classifier to match the gradients of the true log likelihood density. Our experimental evidence shows that the proposed method outperforms the previous methods on both Cifar-10 and Cifar-100 benchmarks noticeably in terms of several key evaluation metrics. We thus conclude that, by adopting DLSM, the conditional scores can be accurately modeled, and the effect of the score mismatch issue is alleviated.

We propose causal isotonic calibration, a novel nonparametric method for calibrating predictors of heterogeneous treatment effects. Furthermore, we introduce cross-calibration, a data-efficient variant of calibration that eliminates the need for hold-out calibration sets. Cross-calibration leverages cross-fitted predictors and generates a single calibrated predictor using all available data. Under weak conditions that do not assume monotonicity, we establish that both causal isotonic calibration and cross-calibration achieve fast doubly-robust calibration rates, as long as either the propensity score or outcome regression is estimated accurately in a suitable sense. The proposed causal isotonic calibrator can be wrapped around any black-box learning algorithm, providing robust and distribution-free calibration guarantees while preserving predictive performance.

Modern LLM RL systems separate rollout generation from policy optimization. These two stages are expected to produce token probabilities that match exactly. However, implementation differences can make them assign different values to the same sequence under the same model weights, inducing Training-Inference Mismatch (TIM). TIM is difficult to inspect because it is entangled with off-policy drift and common stabilization mechanisms. In this work, we isolate TIM in a zero-mismatch diagnostic setting (VeXact), and show that small token-level numerical disagreements can independently cause training collapse. We further show that TIM changes the effective optimization problem, and identify a set of remedies that could mitigate TIM. Our results suggest that TIM is not benign numerical noise, but a systems-level perturbation that should be treated as a first-order factor in analyzing LLM RL stability.

We propose a modified moment matching algorithm to avoid catastrophic failures for sources with a low signal to noise ratio (SNR). The proposed modifications include a method to eliminate non-physical negative pixel values and a forced single iteration with an initial guess derived from co-add measurements when iterative methods are unstable. We correct for all biases in measurements introduced by the method. We find that the proposed modifications allow the algorithm to avoid catastrophic failures in nearly 100\% of the cases, especially at low signal to noise ratio. Additionally, with a reasonable guess from co-add measurements, the algorithm measures the flux, centroid, size, shape and ellipticity with bias statistically consistent with zero. We show the proposed method allows us to measure sources seven times fainter than traditional methods when applied to images obtained from WIYN-ODI. We also present a scheme to find uncertainties in measurements when using the new method to measure astronomical sources.

Quantization is an effective technique for reducing the storage footprint and computational costs of Large Language Models (LLMs), but it often results in performance degradation. Existing post-training quantization methods typically use small, English-only calibration sets; however, their impact on multilingual models remains underexplored. We systematically evaluate eight calibration settings (five single-language and three multilingual mixes) on two quantizers (GPTQ, AWQ) on data from 10 languages. Our findings reveal a consistent trend: non-English and multilingual calibration sets significantly improve perplexity compared to English-only baselines. Specifically, we observe notable average perplexity gains across both quantizers on Llama3.1 8B and Qwen2.5 7B, with multilingual mixes achieving the largest overall reductions of up to 3.52 points in perplexity. Furthermore, our analysis indicates that tailoring calibration sets to the evaluation language yields the largest improvements for individual languages, underscoring the importance of linguistic alignment. We also identify specific failure cases where certain language-quantizer combinations degrade performance, which we trace to differences in activation range distributions across languages. These results highlight that static one-size-fits-all calibration is suboptimal and that tailoring calibration data, both in language and diversity, plays a crucial role in robustly quantizing multilingual LLMs.

Recovering numerical series from line plots requires accurate axis calibration and reliable curve extraction. We present LinePilot Digitizer (LinePilot), which combines continuous color-based curve recovery with three calibration modes: LinePilot (standard), LinePilot (enhanced), and LinePilot (OCR). We also introduce DigitizerBench, the first dedicated benchmark for systematically evaluating digitizer performance, using an orthogonal design spanning signal, rendering, and plot-structure factors with complementary automatic and human-guided evaluations. We evaluate performance using failure-penalized capped normalized root-mean-square error (FPC-NRMSE), which assigns unit loss to missing, unusable, or catastrophically inaccurate outputs. On DigitizerBench-Full, LinePilot (OCR) achieves the lowest mean FPC-NRMSE (0.672) and highest trusted usability (38.2%) among the tested automatic pipelines. On DigitizerBench-Lite, LinePilot (enhanced) achieves the lowest mean FPC-NRMSE (0.081), 100% output success, and highest trusted usability (93.3%). The orthogonal benchmark design further enables factor analysis to identify the factors that most significantly affect digitizer performance. Together, the three calibration modes provide a practical trade-off between automation, user control, and accuracy within a shared curve-recovery workflow.

Machine unlearning aims to remove the influence of specific training data from a model while preserving reliable behavior on the remaining data, making reliable prediction and uncertainty estimation essential for evaluation. Calibration is commonly used as a proxy for reliability in language models, but low calibration error does not necessarily imply reliable decision rules, as models may rely on spurious correlations while remaining well calibrated. We investigate this gap in generative language models using the multiple-choice question-answering evaluation protocol on the TOFU benchmark, measuring probabilistic reliability with calibration metrics (ECE, MCE, Brier) and decision-rule reliability via attribution-based shortcut detection with Integrated Gradients and Local Mutual Information. We find that fine-tuned models achieve low calibration error (ECE ~ 0.04) compared to pretrained models (ECE > 0.5), and models after unlearning retain similarly low calibration despite reduced accuracy on the forget split, while attribution analysis shows increased reliance on correlation-based tokens. These results demonstrate that good calibration can coexist with shortcut-based decision rules after unlearning, extending the reliability paradox to the machine unlearning setting.

The vulnerability of machine learning models to membership inference attacks has received much attention in recent years. However, existing attacks mostly remain impractical due to having high false positive rates, where non-member samples are often erroneously predicted as members. This type of error makes the predicted membership signal unreliable, especially since most samples are non-members in real world applications. In this work, we argue that membership inference attacks can benefit drastically from difficulty calibration, where an attack's predicted membership score is adjusted to the difficulty of correctly classifying the target sample. We show that difficulty calibration can significantly reduce the false positive rate of a variety of existing attacks without a loss in accuracy.

Verifying the final answer of a long reasoning trace may show that the trace is wrong but it does not distinguish three cases. The problem may lie beyond the model's capability, another attempt would succeed, or one step in an otherwise recoverable trace made the trace fail. Standard hidden-state probes are trained on final-answer correctness, a label that conflates these cases. Monte Carlo rollouts distinguish the cases and locate the failing step at additional inference cost. We test the hidden states of 4B and 8B reasoning models for the failure type and the failing step and compare each probe with the strongest baseline that uses no hidden states. On incorrect 8B traces, the confidence probe, a calibrated correctness probe at a midpoint cutoff, misses 81% of cases in which a single step makes the trace unrecoverable and 47% of cases in which another attempt would succeed. A probe with a different training design over the same states reverses the ordering of these two kinds of failure, so either ordering can be read from those states. At both scales, no single tested probe locates the failing step more accurately than a rule based only on trace length, and at 4B a probe trained to predict that step fails to outperform this rule in any of 10 runs on identical traces. The confidence probe therefore indicates that an answer is wrong, but its failure-type ordering depends on its training design.

Post-training quantization has emerged as the most widely used strategy for deploying large language models at low precision. Still, current methods show perplexity degradation at bit-widths less than or equal to 4, partly because representing outliers causes precision issues in parameters that share the same scales as these outliers. This problem is especially pronounced for calibration-free, uniform quantization methods. We introduce SINQ to augment existing post-training quantizers with an additional second-axis scale factor and a fast Sinkhorn-Knopp-style algorithm that finds scales to normalize per-row and per-column variances, thereby minimizing a novel per-matrix proxy target for quantization: the matrix imbalance. Our method has no interactions between layers and can be trivially applied to new architectures to quantize any linear layers. We evaluate our method on the Qwen3 model family and DeepSeek-V2.5. SINQ improves WikiText2 and C4 perplexity significantly against uncalibrated uniform quantization baselines and can be further enhanced by combining it with calibration and non-uniform quantization levels. Code to reproduce the results of this work and to easily quantize models using SINQ is available at https://github.com/huawei-csl/SINQ.

System One models output calibrated probabilities over typed answers such as categorical choices, ordinal levels, or binary outcomes, via a non-generative interface. Software can act on these probabilities through thresholds, cost-weighted choices, and escalation rules. Consequently, if these probabilities are miscalibrated or wording-sensitive, the software ma take unintended actions leaving human operators with no textual rationale to inspect. Current evaluations largely report accuracy and calibration on public classification datasets without a clear reference. We present TypedBench, a benchmark for typed decision models like Jev built from seven policy-labelled generators and nine evaluation suites. We report accuracy as median and range across paraphrases, and calibration error relative to the finite-sample noise floor of a matched, perfectly calibrated predictor. We assess probability quality through selective prediction, ordinal proper scoring rules, and realised cost under asymmetric cost matrices. We evaluate a hosted model, an open encoder, and a family of open decoders spanning 0.8B-9B parameters on identical items. The hosted model follows the stated policy but is wording-sensitive and systematically underconfident; under asymmetric costs, using its probabilities can be worse than taking its top answer. Decoders route exactly and are slow as options or questions are added. The decoder is least accurate on policy questions and degrades with more options. Overall, typed decision models must be evaluated jointly on policy adherence, wording robustness, probability quality, and induced decision outcomes.

Combining the strengths of many existing predictors to obtain a Mixture of Experts which is superior to its individual components is an effective way to improve the performance without having to develop new architectures or train a model from scratch. However, surprisingly, we find that naïvely combining expert object detectors in a similar way to Deep Ensembles, can often lead to degraded performance. We identify that the primary cause of this issue is that the predictions of the experts do not match their performance, a term referred to as miscalibration. Consequently, the most confident detector dominates the final predictions, preventing the mixture from leveraging all the predictions from the experts appropriately. To address this, when constructing the Mixture of Experts, we propose to combine their predictions in a manner which reflects the individual performance of the experts; an objective we achieve by first calibrating the predictions before filtering and refining them. We term this approach the Mixture of Calibrated Experts and demonstrate its effectiveness through extensive experiments on 5 different detection tasks using a variety of detectors, showing that it: (i) improves object detectors on COCO and instance segmentation methods on LVIS by up to sim 2.5 AP; (ii) reaches state-of-the-art on COCO test-dev with 65.1 AP and on DOTA with 82.62 AP_{50}; (iii) outperforms single models consistently on recent detection tasks such as Open Vocabulary Object Detection.